VERSION: :1,$s/2022-01-15/2022-01-15/g ISO: :1,$s/202201141100Z/202201141100Z/g NetBSD: :1,$s/9.99.93/9.99.93/g PKGSRC: :1,$s/2022/2022/ # Check MD5 filename before post this mail. # why dont we take off alone. To: port-armNetBSD.org@localhost Subject: 2022-01-15-netbsd-raspi-aarch64.img From: Jun Ebihara I've updated 2022-01-15-netbsd-raspi-aarch64.img.gz for RPI4. https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-01-15-aarch64/2022-01-15-netbsd-raspi-aarch64.img.gz https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-01-15-aarch64/MD5 Topics: - openssl-1.1.1m - libffi-3.4.2nb1 - mlterm-3.9.1nb2 - ruby27-mikutter-5.0.2 - Raspberry Pi 4 UEFI Firmware v1.32 Always use non translating DMA in DT mode [tianocore/edk2-platforms@efff29c] Make sure normal memory is not be marked uncached [tianocore/edk2-platforms@af649f8] Make sure all drivers are disconnected before reboot [tianocore/edk2-platforms@63d520f] Fix ACPI MMIO host bridge window attribute [tianocore/edk2-platforms@ab6fcc2] Revert to using latest start4.elf/fixup4.dat - openssh 8.8 https://www.openssh.com/txt/release-8.8 cf. ~/.ssh/config Host old-host HostkeyAlgorithms +ssh-rsa PubkeyAcceptedAlgorithms +ssh-rsa - SD/MMC Configration Switch Default uSD/eMMC Routing: Arasan SDHCI -> EMMC2 http://mail-index.netbsd.org/port-arm/2021/08/08/msg007393.html the Arasan SDHCI is used to connect bwfm(4). In this image, a synbolic link added /libdata/firmware/if_bwfm: ln -s brcmfmac43455-sdio.raspberrypi,4-model-b.txt "brcmfmac43455-sdio.Raspberry Pi 4 Model B.txt" to avoid bwfm0: autoconfiguration error: NVRAM file not available - only for RPI4 (fill dtb for RPI3?) - build script https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64 - [Issue] Can't recognize DOS partition from Windows Should I Use MBR version image? - rpi cm4 + waveshare mini base board B seems stop after kernel load http://mail-index.netbsd.org/port-arm/2021/06/30/msg007343.html - pkgin support edit /usr/pkg/etc/pkgin/repositories.conf cf. http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022 and pkgin update sysinfo: bozohttpd-20220104 NetBSD-9.99.93 openssl-1.1.1m sh-20181212-20220114074052Z tcsh-6.23.02 userland-NetBSD-9.99.93/evbarm pkgsrc: at-spi2-atk-2.38.0nb1 at-spi2-core-2.40.3nb1 atk-2.36.0nb1 bash-5.1.16 cairo-gobject-1.16.0nb6 curl-7.81.0 desktop-file-utils-0.26nb1 fossil-2.17nb1 gdk-pixbuf2-2.42.6nb1 git-base-2.34.1nb1 glib2-2.70.2nb1 gmp-6.2.1nb2 gnutls-3.7.2nb2 gobject-introspection-1.68.0nb1 gtk2+-2.24.33nb4 gtk3+-3.24.30nb2 harfbuzz-3.1.2nb1 icu-70.1 libcups-2.3.3op2nb4 libffi-3.4.2nb1 libxkbcommon-1.3.1nb1 libxml2-2.9.12nb2 libxslt-1.1.34nb7 lintpkgsrc-4.97 m17n-lib-1.8.0nb6 medit-1.2.0nb19 mlterm-3.9.1nb2 nghttp2-1.46.0nb1 p11-kit-0.24.0nb4 pango-1.48.10nb1 pkg_install-20211115 pkgin-21.12.0nb1 python39-3.9.9nb2 qt5-qtbase-5.15.2nb8 qt5-qtx11extras-5.15.2nb3 qt5-qtxmlpatterns-5.15.2nb3 ruby27-atk-3.4.9nb1 ruby27-cairo-gobject-3.4.9nb1 ruby27-diva-2.0.1 ruby27-gdk3-3.4.9nb1 ruby27-gdk_pixbuf2-3.4.9nb1 ruby27-gio2-3.4.9nb1 ruby27-glib2-3.4.9nb1 ruby27-gobject-introspection-3.4.9nb1 ruby27-gtk3-3.4.9nb1 ruby27-mikutter-5.0.2 ruby27-mikutter-plugins-twitter-5.0 ruby27-nokogiri-1.12.5nb2 ruby27-pango-3.4.9nb1 ruby27-pluggaloid-1.7.0 shared-mime-info-1.10nb5 tcsh-6.23.02 uim-1.8.9pre20210104nb2 wayland-1.18.0nb4 wayland-protocols-1.20nb1 wget-1.21.2nb2 RPI4 status: - boot via UEFI_VER=v1.32 https://github.com/pftf/RPi4/releases In this image,pre-setted RPI_EFI.fd Advanced Configration -> Limit RAM to 3GB Disabled - HDMI: works - audio: vcaudio http://mail-index.netbsd.org/source-changes-d/2021/01/22/msg013133.html - USB device: works - bwfm0 Wireless network:? (works well on RPI3,not works on RPI4?) - Pi 4 Bootloader Configuration https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md Update: - NetBSD-current 9.99.93 evbarm-aarch64 202201141100Z arm64.img from nyftp. - pkginfo https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo - sysinfo https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo Update from 20221-06: https://github.com/ebijun/NetBSD/commit/1b3ef330ecf023aa73d58ccb8b4029c520f33cdf - mate/firefox/inkscape/libreoffice works well pkg_add mate pkg_add gvfs pkg_add firefox pkg_add firefox-l10n pkg_add libreoffice pkg_add inkscape pkg_add gimp pkg_add scribus pkg_add py38-sphinx pkg_add wxGTK30 pkg_add gnome-keyring - Sphinx with latexpdf https://github.com/ebijun/NetBSD/blob/master/Guide/latexpdf.rst - pkgin: upgrade failed - raspberry-pi userland: compile failed Pre-installed packages: bash tcsh vlgothic-ttf icewm xli ruby27-mikutter uim fossil sudo git-base zsh mlterm pkg_chk lintpkgsrc mozilla-rootcerts dillo medit lrzsz - pre-build packages: See /etc/pkg_install.conf PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022/ pkgsrc: # cd /usr # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz # ls /usr/pkgsrc ... check if exists. # tar tzvf pkgsrc.tar.gz |head ... check the archive # tar xzvf pkgsrc.tar.gz ... extract # ls /usr/pkgsrc ... check what extracted # pkg_chk -g ... List to/usr/pkgsrc/pkgchk.conf # (cd /usr/pkgsrc;cvs update -PAd) ... update # pkg_chk -un ... Update (listup) # pkg_chk -u ... Update EEPROM verson: Check&update with Raspberry Pi OS (pi:raspberry) pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update FIRMWARE_RELEASE_STATUS="stable" pi@raspberrypi:~ $ sudo rpi-eeprom-update BCM2711 detected Dedicated VL805 EEPROM detected BOOTLOADER: up-to-date CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546) LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546) FW DIR: /lib/firmware/raspberrypi/bootloader/stable VL805: up-to-date CURRENT: 000138a1 LATEST: 000138a1 -- Jun Ebihara