$NetBSD: README,v 1.4 2017/04/23 23:39:42 sevan Exp $ Kernel Developer's Manual DESCRIPTION The kernel example dynamic modules. This directory contains the following example modules: * hello - the simplest `hello world' module * properties - handle incoming properties during the module load * readhappy - basic implementation of read(9) with happy numbers * ping - basic ioctl(9) * luahello - the simplest `hello world' Lua module * luareadhappy - demonstrates calling Lua code from C To build the examples you need a local copy of NetBSD sources. You also need the comp set with toolchain. To build the module just enter a directory with example modules and use make(1): # make To load, unload, and stat the module use modload(8), modunload(8) and modstat(8). The S parameter in the Makefile files points to src/sys and it can be overloaded in this way: # make S=/data/netbsd/src/sys The code of a module does not need to be in src/sys unless you use the autoconf(9) framework. A cross-built of a module for a target platform is possible with the build.sh framework. You need to generate the toolchain and set appropriately PATH to point bin/ in the TOOLDIR path. An example command to cross-build a module with the amd64 toolchain is as follows: # nbmake-amd64 S=/data/netbsd/src/sys The example modules should not be used on a production machine. All modules that create a cdevsw should be verified that the major number should not conflict with a real device. SEE ALSO modctl(2), module(7), modload(8), modstat(8), modunload(8), module(9), intro(9lua) HISTORY An example of handling incoming properties first appeared in NetBSD 5.0 and was written by Julio Merino with further modifications by Martin Husemann, Adam Hamsik, John Nemeth and Mindaugas Rasiukevicius. This document and additional modules (hello, readhappy, properties, ping, luahello and luareadhappy) first appeared in NetBSD 8.0; they were written by Kamil Rytarowski. AUTHORS This document was written by Kamil Rytarowski.