# $NetBSD: rc.conf,v 1.139.6.2 2020/10/16 14:37:31 martin Exp $ # # /etc/defaults/rc.conf -- # default configuration of /etc/rc.conf # # see rc.conf(5) for more information. # # DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE. # EDIT /etc/rc.conf INSTEAD. # # # Use program=YES to enable program, NO to disable it. program_flags are # passed to the program on the command line. # # Uncomment this if you want to use local paths in rc. # #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin # Uncomment the following to execute each /etc/rc.d script in # the current shell rather than in a subshell. This may be # faster on very slow machines that have an expensive fork(2). # NOTE: USE THIS AT YOUR OWN RISK; A ROGUE COMMAND # MAY INADVERTENTLY PREVENT BOOT TO MULTIUSER. # #rc_fast_and_loose=YES # If rc_silent is true then /etc/rc will suppress most output to # the console. The default is taken from the AB_SILENT flag passed # from the boot loader to the kernel in the boothowto(9) variable. # # rc_silent_cmd is executed once for each suppressed line of output. # Useful values are ":" and "twiddle". # rc_silent=$( [ "$(( $(/sbin/sysctl -n kern.boothowto 2>/dev/null || echo 0) \ & 0x40000 ))" != 0 ] && echo true || echo false ) rc_silent_cmd=twiddle # Additional flags to the rcorder(8) that's run by /etc/rc. # rc_rcorder_flags="" # The directories searched for rc scripts. # These directories must be part of the root file system. rc_directories=/etc/rc.d # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown. # do_rcshutdown=YES # Additional flags to the rcorder(8) that's run by /etc/rc.shutdown. # rcshutdown_rcorder_flags="" # If this is non-blank, use as the number of seconds to run a watchdog # timer which will terminate /etc/rc.shutdown if the timeout expires. # rcshutdown_timeout="" # Basic network configuration # # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu). # If blank, use /etc/myname. # hostname="" # If there's only one way out of your IPv4 network, set this to the hostname # or the IPv4 address of the router that will get your packets off the LAN. # If blank, use /etc/mygate. # defaultroute="" # Same thing for IPv6. If blank, use /etc/mygate6. # defaultroute6="" # The NIS domain name (formerly known as Yellow Pages); not in any way # related to Internet domain names. # If blank, use /etc/defaultdomain. # domainname="" # Filesystems to mount early in boot-up. # Note that `/var' is needed in $critical_filesystems_local (or # implied as part of `/') as certain services that need /var (such as # dhclient) may be needed to get the network operational enough to mount # the $critical_filesystems_remote. Prepending "OPTIONAL:" means it # will not be an error if that file system is not present in fstab(5). # critical_filesystems_local="OPTIONAL:/var" critical_filesystems_remote="OPTIONAL:/usr" # Swap device controls. # no_swap=NO # Set to YES if you have purposefully setup no swap # partitions and don't want to be warned about it. swapoff=YES # Remove block-type swap partitions upon shutdown # This defaults to yes, so that raids shutdown cleanly # Concatenated disk driver. # ccd=YES # RAIDframe driver (manually configured devices). # raidframe=YES # Crypto file system. # cgd=YES # Logical Volume Manager # lvm=NO # One-time actions and programs on boot-up. # savecore=YES savecore_flags="-z" savecore_dir="/var/crash" resize_root=NO # resize root to fill partition per_user_tmp=NO # per-user /tmp directories per_user_tmp_dir="/private/tmp" # real storage for /tmp clear_tmp=YES # clear /tmp after reboot update_motd=YES # updates /etc/motd update_motd_release=NO motd_release_tag="" # release info in /etc/motd dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot accounting=NO # uses /var/account/acct newsyslog=NO newsyslog_flags="" # trim log files quota=YES # check and enable quotas ldconfig=YES # rebuild a.out ldconfig cache sysdb=YES # build system databases rndctl=NO rndctl_flags="" # configure rndctl(8) gpio=NO # configure GPIO devices modules=YES # process /etc/modules.conf # cope with other OSes using the real time clock at localtime on this # machine (by adjusting kern.rtc_offset at boot) rtclocaltime=NO # NOTE: default coredump name now set in /etc/sysctl.conf # # File system check flags; default to preen mode, checking file systems # that are listed in /etc/fstab in parallel as the fsck pass number # permits. Fix minor faults automatically, and exit with non 0 only # when major errors occur. # fsck_flags=-p # Security setting. If $securelevel is non-empty, the system securelevel # is set to this value early in the boot sequence. Otherwise the default # action is taken (see init(8)). # securelevel="" # securelevel to set to # To set the IP address of an interface either use # ifconfig_xxN="IP-NO" # where xxN is the interface. If this variable is not set then # contents of the file /etc/ifconfig.xxN is used. # Networking startup. # # Wait up to 15 seconds for the tentative flag to clear from all addresses. # Wait up to 5 seconds for the detached flag to clear from all addresses. # Addresses are detached if there is no carrier, thus we have a small # wait to see if we get a carrier. # Even a wired interface may not recognise it has a carrier right away. ifconfig_wait_dad_flags="-w 15 -W 5" mdnsd=NO npf=NO npfd=NO ipfilter=NO ipfilter_flags="" # uses /etc/ipf.conf ipnat=NO # uses /etc/ipnat.conf ipfs=NO ipfs_flags="" # save/load ipnat and ipf states ipsec=NO # uses /etc/ipsec.conf ipmon=NO ipmon_flags="-Dns" # syslog ipfilter messages pf=NO pf_rules="/etc/pf.conf" pf_flags="" pflogd=NO ftp_proxy=NO racoon=NO # IKE daemon auto_ifconfig=YES # config all avail. interfaces net_interfaces="" # used only if above is NO flushroutes=YES # flush routes in netstart dhcpcd=NO dhcpcd_flags="-qM" # For ifconfig_XXX=dhcp. dhclient=NO # behave as a DHCP client dhclient_flags="" # blank: config all interfaces ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall ppp=YES ppp_peers="" # /etc/ppp/peers to call ip6mode=host # host, autohost or router ip6uniquelocal=NO # IPv6 unique-local forwarding # Special treatment for interfaces that need to be downed on # shutdown (because they might cause unnecessary costs or block resources # on the peer). All pppoe* interfaces are automatically included in this # list, add others here manually. #force_down_interfaces="" ifwatchd=NO # execute up/down scripts for in-kernel PPPoE interfaces ifwatchd_flags="-u /etc/ppp/ip-up -d /etc/ppp/ip-down pppoe0" # ALTQ configuration/monitoring daemon altqd=NO altqd_flags="" # Daemons required by servers. These are not needed for strictly client use. # # inetd is used to start the IP-based services enabled in /etc/inetd.conf # inetd=YES inetd_flags="-l" # -l logs libwrap # identd # identd=NO identd_flags="-b -l -u nobody" # rpcbind (formerly known as 'portmap') is used to look up RPC-based services. # rpcbind=NO rpcbind_flags="-l" # -l logs libwrap # Commonly used daemons. # syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only cron=YES named=NO named_flags="" # see below for named_chrootdir timed=NO timed_flags="" ntpd=NO ntpd_flags="" # see below for ntpd_chrootdir # The default setting for postfix here is YES, but gets re-examined by # the rc.d/postfix startup script when it runs. The script sets # _rc_d_postfix to "check", and then causes all rc.conf settings to # be re-evaluated. If the value of $postfix after this is "check", # the script then checks to see if /etc/mailer.conf selects the system # postfix. If not, it does print a warning and does not start postfix # to avoid conflict with a different MTA. postfix=${_rc_d_postfix:-YES} lpd=NO lpd_flags="-s" # -s "secure" unix domain only sshd=NO sshd_flags="" ssh_keygen_flags="" ftpd=NO ftpd_flags="-ll" httpd=NO httpd_flags="" httpd_wwwdir="/var/www" httpd_wwwuser="_httpd" # To run the named(8) DNS server as an unprivileged user under a # chroot(2) cage, uncomment the following after migrating the contents # of /etc/namedb to /var/chroot/named/etc/namedb # #named_chrootdir="/var/chroot/named" # To run the ntpd(8) NTP server as an unprivileged user under a # chroot(2) cage, uncomment the following, after ensuring that: # - The kernel has "pseudo-device clockctl" compiled in # - /dev/clockctl is present # #ntpd_chrootdir="/var/chroot/ntpd" # Routing daemons. # routed=NO routed_flags="-q" gated=NO mrouted=NO mrouted_flags="" route6d=NO route6d_flags="" ldpd=NO # Daemons used to boot other hosts over a network. # rarpd=NO rarpd_flags="-a" bootparamd=NO bootparamd_flags="" dhcpd=NO dhcpd_flags="-q" dhcrelay=NO dhcrelay_flags="" rbootd=NO rbootd_flags="" mopd=NO mopd_flags="-a" ndbootd=NO ndbootd_flags="-s /tftpboot /tftpboot/bootyy" rtadvd=NO rtadvd_flags="" isibootd=NO isibootd_flags="" # X11 daemons. # xfs=NO xfs_flags="" # X11 font server xdm=NO xdm_flags="" # X11 display manager; needs # wscons=YES for local displays. # Update fontconfig cache at boot fccache=YES # YP (NIS) daemons. # ypbind=NO ypbind_flags="" ypserv=NO ypserv_flags="-d" yppasswdd=NO yppasswdd_flags="" # NFS daemons and parameters. # mountd=NO mountd_flags="" # NFS mount requests daemon nfs_client=NO # enable client daemons nfs_server=NO # enable server daemons nfsd_flags="" lockd=NO lockd_flags="" statd=NO statd_flags="" amd=NO amd_flags="-l syslog -x error,noinfo,nostats" amd_dir=/amd # mount dir # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility) kdc=NO kdc_flags="--detach" # iSCSI target iscsi_target=NO iscsi_target_flags="" # iSCSI kernel initiator iscsid=NO # WPA daemons. hostapd=NO hostapd_flags="-B /etc/hostapd.conf" wpa_supplicant=NO wpa_supplicant_flags="" # -i -c # ISDN daemon isdnd=NO isdnd_flags="" # Bluetooth configuration bluetooth=NO # and the following are used when bluetooth=YES btconfig_devices="" # all bthcid=YES bthcid_flags="" sdpd=YES sdpd_flags="" # Other daemons. # rwhod=NO rwhod_flags="-u _rwhod" devpubd=NO devpubd_flags="" # autocreate nodes for new devs envsys=NO # Set /etc/envsys.conf preferences # Hardware daemons. # apmd=NO apmd_flags="" # APM power management daemon. powerd=NO powerd_flags="" # power management daemon screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker moused=NO # serial mouse handler moused_flags="-p /dev/tty00" wdogctl=NO # watchdog timer control # wdogctl_flags="-k devicename" irdaattach=NO # attach serial lines to IrDA irdaattach_flags="tty00" # Configuration of "wscons" console driver virtual screens. # wscons=NO wscons_flags="" # setup wscons from wscons.conf # Configuration of "wsmoused" console driver cut-n-paste support # wsmoused=NO wsmoused_flags="" # Configuration of "tpctl" touch panel calibration utility # tpctl=NO tpctl_flags="" # Mixer setting # mixerctl=NO mixerctl_mixers="" # "mixer0 mixer1" means saving # and restoring their settings # Vi recovery notification. Vi(1)'s -r option can recover files which were # accidentally closed. See vi(1) for more details. # virecover=YES # Veriexec signature loading. # veriexec=NO veriexec_strict=0 veriexec_verbose=0 veriexec_flags="-k" # Entropy load/save to/from /dev/random at startup/shutdown # random_seed=YES # Creating / updating of man page index on boot makemandb=YES # Disable Simultaneous Multi-Threading smtoff=NO # blacklist daemon, needs npf blacklistd=NO # IPv6 address selection policy ip6addrctl=NO # ipv6_prefer, ipv4_prefer, auto ip6addrctl_policy=auto ip6addrctl_verbose=NO # Unbound unbound=NO unbound_chrootdir=/var/chroot/unbound # Nsd nsd=NO nsd_chrootdir=/var/chroot/nsd nsd_flags="-t ${nsd_chrootdir}"