2020-12-31  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/98302
	* tree-vect-patterns.c (vect_determine_precisions_from_users): Make
	sure that the precision remains greater than the shift count.

2020-12-31  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94994
	* tree-vect-data-refs.c (vect_vfa_align): Use dr_alignment.

2020-12-31  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/98214
	* genmodes.c (emit_insn_modes_h): Emit a definition of CONST_MODE_MASK.
	(emit_mode_mask): Treat mode_mask_array as non-constant if adj_nunits.
	(emit_mode_adjustments): Update GET_MODE_MASK when updating
	GET_MODE_NUNITS.
	* machmode.h (mode_mask_array): Use CONST_MODE_MASK.

2020-12-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94802
	* match.pd (clz(X) == 0 -> (int)X < 0): New simplification.
	(clz(X) == (prec-1) -> X == 1): Likewise.

2020-12-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94785
	* match.pd ((-(X < 0) | 1) * X -> abs (X)): New simplification.
	((-(X < 0) | 1U) * X -> absu (X)): Likewise.

2020-12-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98474
	* wide-int.cc (wi::to_mpz): If wide_int has MSB set, but type
	is unsigned and excess negative, append set bits after len until
	precision.

2020-12-31  Jakub Jelinek  <jakub@redhat.com>

	PR c++/98206
	* fold-const.c: Include asan.h.
	(fold_unary_loc): Don't optimize (ptr_type) (((ptr_type2) x) p+ y)
	into ((ptr_type) x) p+ y if sanitizing alignment in GENERIC and
	ptr_type points to type with higher alignment than ptr_type2.

2020-12-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/56719
	* tree-ssa-reassoc.c (optimize_range_tests_cmp_bitwise): Also optimize
	x < C && y < C && z < C when C is a power of two constant into
	(x | y | z) < C.

2020-12-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md: Remove unnecessary clobbers
	from combine splitters.

2020-12-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/98461
	* config/i386/sse.md (<sse2_avx2>_pmovmskb): Add splitters
	for pmovmskb of NOT vector.

2020-12-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (maddsidi4_split): Skip macd gen, use mac insn
	instead.
	(macd): Update register letters.
	(umaddsidi4_split): Skip macdu gen, use macu insn instead.
	(macdu): Update register letters.

2020-12-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_secondary_reload): Flip if-condition
	predicates.

2020-12-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.h (REGNO_OK_FOR_BASE_P): Check if defined
	reg_renumber.

2020-12-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (prepare_move_operands): Use a temporary
	registers when we have cached mem-to-uncached mem moves.

2020-12-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (movdi_insn): Update pattern, no predicated
	vadd2 usage.
	(movdf_insn): Likewise.
	* config/arc/simdext.md (movVEC_insn): Likewise.

2020-12-29  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_gen_TWO52): Use REAL_MODE_FORMAT
	to determine number of mantissa bits.  Use real_2expN instead
	of real_ldexp.
	(ix86_expand_rint): Use copy_to_reg.
	(ix86_expand_floorceildf_32): Ditto.
	(ix86_expand_truncdf_32): Ditto.
	(ix86_expand_rounddf_32): Ditto.
	(ix86_expand_floorceil): Use copy_to_reg and int_mode_for_mode.
	(ix86_expand_trunc): Ditto.
	(ix86_expand_round): Ditto.

2020-12-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/standards.texi (HSAIL): Remove section.

2020-12-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96793
	* config/i386/i386-expand.c (ix86_expand_rint):
	Remove the sign of the intermediate value for flag_rounding_math.

2020-12-28  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_trunc): Use
	existing temporary register to avoid a call to force_reg.

2020-12-28  Hongyu Wang  <hongyu.wang@intel.com>

	* config/i386/i386.md (optab): New code attr.
	* config/i386/sse.md (<code>v32qiv32hi2): Rename to ...
	(<optab>v32qiv32hi2) ... this.
	(<code>v16qiv16hi2): Likewise.
	(<code>v8qiv8hi2): Likewise.
	(<code>v16qiv16si2): Likewise.
	(<code>v8qiv8si2): Likewise.
	(<code>v4qiv4si2): Likewise.
	(<code>v16hiv16si2): Likewise.
	(<code>v8hiv8si2): Likewise.
	(<code>v4hiv4si2): Likewise.
	(<code>v8qiv8di2): Likewise.
	(<code>v4qiv4di2): Likewise.
	(<code>v2qiv2di2): Likewise.
	(<code>v8hiv8di2): Likewise.
	(<code>v4hiv4di2): Likewise.
	(<code>v2hiv2di2): Likewise.
	(<code>v8siv8di2): Likewise.
	(<code>v4siv4di2): Likewise.
	(<code>v2siv2di2): Likewise.

2020-12-27  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/analyzer.texi (Analyzer Internals): Find a new source for
	the "A Memory Model for Static Analysis of C Programs" paper.

2020-12-25  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (C++ Module Mapper): Fix reference to libcody.

2020-12-24  Iain Sandoe  <iain@sandoe.co.uk>

	* configure.ac: Add gxx-libcxx-include-dir handled
	in the same way as the regular cxx header directory.
	* Makefile.in: Regenerated.
	* config.in: Likewise.
	* configure: Likewise.
	* cppdefault.c: Pick up libc++ headers if the option
	is enabled.
	* cppdefault.h (struct default_include): Amend comments
	to reflect the extended use of the cplusplus field.
	* incpath.c (add_standard_paths): Allow for multiple
	c++ header include path variants.
	* doc/invoke.texi: Document the -stdlib= option.

2020-12-24  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator (arch_canonicalize): Call
	decode for the subprocess return value.

2020-12-23  Martin Sebor  <msebor@redhat.com>

	PR middle-end/98160
	* builtins.c (warn_dealloc_offset): Avoid assuming calls are made
	through declared functions and not pointers.

2020-12-23  Martin Sebor  <msebor@redhat.com>

	PR c++/98413
	* builtins.c (get_offset_range): Avoid non-integers/-pointers.

2020-12-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (validate_macosx_version_min): Allow
	MACOSX_DEPLOYMENT_TARGET=11.
	(darwin_default_min_version): Adjust warning spelling to avoid
	an apostrophe.

2020-12-23  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96793
	* config/i386/i386-expand.c (ix86_expand_truncdf_32):
	Remove the sign of the intermediate value for flag_rounding_math.

2020-12-22  Qian Jianhua  <qianjh@cn.fujitsu.com>

	* config/arm/types.md (define_attr "autodetect_type"): New.
	(define_attr "type"): Subdivide alu_shift_imm.
	* config/arm/common.md: New file.
	* config/aarch64/predicates.md:Include common.md.
	* config/arm/predicates.md:Include common.md.
	* config/aarch64/aarch64.md (*add_<shift>_<mode>): Set autodetect_type.
	(*add_<shift>_si_uxtw): Likewise.
	(*sub_<shift>_<mode>): Likewise.
	(*sub_<shift>_si_uxtw): Likewise.
	(*neg_<shift>_<mode>2): Likewise.
	(*neg_<shift>_si2_uxtw): Likewise.
	* config/arm/arm.md (*addsi3_carryin_shift): Likewise.
	(add_not_shift_cin): Likewise.
	(*subsi3_carryin_shift): Likewise.
	(*subsi3_carryin_shift_alt): Likewise.
	(*rsbsi3_carryin_shift): Likewise.
	(*rsbsi3_carryin_shift_alt): Likewise.
	(*arm_shiftsi3): Likewise.
	(*<arith_shift_insn>_multsi): Likewise.
	(*<arith_shift_insn>_shiftsi): Likewise.
	(subsi3_carryin): Set new type.
	(*if_arith_move): Set new type.
	(*if_move_arith): Set new type.
	(define_attr "core_cycles"): Use new type.
	* config/arm/arm-fixed.md (arm_ssatsihi_shift): Set autodetect_type.
	* config/arm/thumb2.md (*orsi_not_shiftsi_si): Likewise.
	(*thumb2_shiftsi3_short): Set new type.
	* config/aarch64/falkor.md (falkor_alu_1_xyz): Use new type.
	* config/aarch64/saphira.md (saphira_alu_1_xyz): Likewise.
	* config/aarch64/thunderx.md (thunderx_arith_shift): Likewise.
	* config/aarch64/thunderx2t99.md (thunderx2t99_alu_shift): Likewise.
	* config/aarch64/thunderx3t110.md (thunderx3t110_alu_shift): Likewise.
	(thunderx3t110_alu_shift1): Likewise.
	* config/aarch64/tsv110.md (tsv110_alu_shift): Likewise.
	* config/arm/arm1020e.md (1020alu_shift_op): Likewise.
	* config/arm/arm1026ejs.md (alu_shift_op): Likewise.
	* config/arm/arm1136jfs.md (11_alu_shift_op): Likewise.
	* config/arm/arm926ejs.md (9_alu_op): Likewise.
	* config/arm/cortex-a15.md (cortex_a15_alu_shift): Likewise.
	* config/arm/cortex-a17.md (cortex_a17_alu_shiftimm): Likewise.
	* config/arm/cortex-a5.md (cortex_a5_alu_shift): Likewise.
	* config/arm/cortex-a53.md (cortex_a53_alu_shift): Likewise.
	* config/arm/cortex-a57.md (cortex_a57_alu_shift): Likewise.
	* config/arm/cortex-a7.md (cortex_a7_alu_shift): Likewise.
	* config/arm/cortex-a8.md (cortex_a8_alu_shift): Likewise.
	* config/arm/cortex-a9.md (cortex_a9_dp_shift): Likewise.
	* config/arm/cortex-m4.md (cortex_m4_alu): Likewise.
	* config/arm/cortex-m7.md (cortex_m7_alu_shift): Likewise.
	* config/arm/cortex-r4.md (cortex_r4_alu_shift): Likewise.
	* config/arm/exynos-m1.md (exynos_m1_alu_shift): Likewise.
	* config/arm/fa526.md (526_alu_shift_op): Likewise.
	* config/arm/fa606te.md (606te_alu_op): Likewise.
	* config/arm/fa626te.md (626te_alu_shift_op): Likewise.
	* config/arm/fa726te.md (726te_alu_shift_op): Likewise.
	* config/arm/fmp626.md (mp626_alu_shift_op): Likewise.
	* config/arm/marvell-pj4.md (pj4_shift): Likewise.
	(pj4_shift_conds): Likewise.
	(pj4_alu_shift): Likewise.
	(pj4_alu_shift_conds): Likewise.
	* config/arm/xgene1.md (xgene1_alu): Likewise.
	* config/arm/arm.c (xscale_sched_adjust_cost): Likewise.

2020-12-22  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96793
	* config/i386/i386-expand.c (ix86_expand_floorceil):
	Remove the sign of the intermediate value for flag_rounding_math.
	(ix86_expand_floorceildf_32): Ditto.

2020-12-22  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386.md (*one_cmpl<mode>2_1): Fix typo, change
	alternative from 2 to 1 in attr isa.

2020-12-22  Ian Lance Taylor  <iant@golang.org>

	* godump.c (go_output_typedef): If DECL_ORIGINAL_TYPE is NULL, use
	TREE_TYPE.

2020-12-21  Jakub Jelinek  <jakub@redhat.com>

	PR c++/98353
	* gimplify.c (gimplify_init_ctor_eval_range): Gimplify value before
	storing it into cref.

2020-12-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (darwin_find_version_from_kernel):
	Compute the minor OS version from the minor kernel version.

2020-12-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98407
	* fold-const.c (native_encode_initializer): When handling flexible
	array members, fix up computation of length for memset.  Also remove
	" - o" as o is always guaranteed to be 0 in this code path.

2020-12-21  Jakub Jelinek  <jakub@redhat.com>

	PR c++/98383
	* gimplify.c (struct gimplify_omp_ctx): Add in_for_exprs flag.
	(gimple_add_tmp_var): For addressable temporaries appearing in
	simd lb, b or incr expressions, don't add a private clause unless
	it is seen also outside of those expressions in the simd body.
	(omp_notice_variable): Likewise.
	(gimplify_omp_for): Set and reset in_for_exprs around gimplification
	of lb, b or incr expressions.

2020-12-20  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.md (bswapsi2, bswapdi2): New patterns.

2020-12-20  Jakub Jelinek  <jakub@redhat.com>

	PR other/98400
	* doc/invoke.texi (-mbackchain): Fix a typo - -mmo-backchain ->
	-mno-backchain.

2020-12-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/98366
	* fold-const.c (native_encode_initializer): Don't try to
	memset more than total_bytes with off == -1 even if len is large.
	Handle flexible array member initializers if off == -1 and mask is
	NULL.
	* expr.c (convert_to_bytes): Remove.
	(constant_byte_string): Use native_encode_initializer instead of
	convert_to_bytes.  Remove extraneous semicolon.  Punt on various
	corner-cases the APIs don't handle, like sizes > INT_MAX,
	BITS_PER_UNIT != 8, CHAR_BIT != 8.

2020-12-19  Iain Buclaw  <ibuclaw@gdcproject.org>

	PR d/98067
	* dwarf2out.c (dwarf2out_imported_module_or_decl_1): Handle
	  CONST_DECL only if is_fortran, is_ada, or is_dlang.

2020-12-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98378
	* gimple-ssa-store-merging.c (find_bswap_or_nop): Punt if CONSTRUCTOR
	has no elements.

2020-12-18  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (struct gimplify_omp_ctx): Add has_depend member.
	(gimplify_scan_omp_clauses): Set it to true if OMP_CLAUSE_DEPEND
	appears on OMP_TASK.
	(gimplify_adjust_omp_clauses_1, gimplify_adjust_omp_clauses): Force
	GOVD_WRITTEN on shared variables if task construct has depend clause.

2020-12-18  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	PR target/98177
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
	get_same_sized_vectype to obtain index type.
	(vectorizable_reduction): Likewise.

2020-12-18  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* langhooks-def.h (lhd_get_decl_init): New.
	(lhd_finish_decl_inits): New.
	(LANG_HOOKS_GET_DECL_INIT): New.
	(LANG_HOOKS_OMP_FINISH_DECL_INITS): New.
	(LANG_HOOKS_DECLS): Add LANG_HOOKS_GET_DECL_INIT and
	LANG_HOOKS_OMP_FINISH_DECL_INITS.
	* langhooks.c (lhd_omp_get_decl_init): New.
	(lhd_omp_finish_decl_inits): New.
	* langhooks.h (struct lang_hooks_for_decls): Add omp_get_decl_init
	and omp_finish_decl_inits.
	* omp-offload.c (omp_discover_declare_target_var_r): Use
	get_decl_init langhook in place of DECL_INITIAL.  Call
	omp_finish_decl_inits langhook at end of function.

2020-12-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_preferred_simd_mode): Use
	aarch64_full_sve_mode and aarch64_vq_mode directly, instead of
	going via aarch64_simd_container_mode.

2020-12-18  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/iterators.md (rot): Add UNSPEC_VCMUL, UNSPEC_VCMUL90,
	UNSPEC_VCMUL180, UNSPEC_VCMUL270.

2020-12-17  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/arm/arm-cpus.in: Add Cortex-A78C core.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.
	* doc/invoke.texi: Update docs.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/98347
	* rtl-ssa/access-utils.h (full_register): Use regno_reg_rtx
	instead of reg_raw_mode.

2020-12-17  H.J. Lu  <hjl.tools@gmail.com>

	* targhooks.h (default_estimated_poly_value): Updated.

2020-12-17  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi (C++ Modules): Document lack of std
	library header units.

2020-12-17  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* target.h (enum poly_value_estimate_kind): Define.
	(estimated_poly_value): Take an estimate kind argument.
	* target.def (estimated_poly_value): Update definition for the
	above.
	* doc/tm.texi: Regenerate.
	* targhooks.c (estimated_poly_value): Update prototype.
	* tree-vect-loop.c (vect_better_loop_vinfo_p): Use min, max and
	likely estimates of VF to pick between vinfos.
	* config/aarch64/aarch64.c (aarch64_cmp_autovec_modes): Use
	estimated_poly_value instead of aarch64_estimated_poly_value.
	(aarch64_estimated_poly_value): Take a kind argument and handle
	it.

2020-12-17  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon.h (vcreate_p64): Remove call to
	'__builtin_neon_vcreatedi'.

2020-12-17  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97750
	* range-op.cc (operator_cast::op1_range): Handle pointers better.

2020-12-17  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* rtl-ssa.h: Include memmodel.h before tm_p.h.

2020-12-17  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/98289
	* shrink-wrap.c (can_get_prologue): Don't punt on EDGE_CROSSING
	incoming edges.

2020-12-17  Marius Hillenbrand  <mhillen@linux.ibm.com>

	* configure.ac: Change --enable-s390-excess-float-precision
	default behavior for cross compiles with target headers.
	* configure: Regenerate.
	* doc/install.texi: Adjust documentation.

2020-12-17  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.md (*ashlsi3_1, *ashlsi3_3x, *ashrsi3_3x)
	(*lshrsi3_3x): New patterns.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* fwprop.c: Rewrite to use the RTL SSA framework.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* configure.ac: Add rtl-ssa to the list of dependence directories.
	* configure: Regenerate.
	* Makefile.in (rtl-ssa-warn): New variable.
	(OBJS): Add the rtl-ssa object files.
	* emit-rtl.h (rtl_data::ssa): New field.
	* rtl-ssa.h: New file.
	* system.h: Include <functional> when INCLUDE_FUNCTIONAL is defined.
	* rtl-ssa/access-utils.h: Likewise.
	* rtl-ssa/accesses.h: New file.
	* rtl-ssa/accesses.cc: Likewise.
	* rtl-ssa/blocks.h: New file.
	* rtl-ssa/blocks.cc: Likewise.
	* rtl-ssa/change-utils.h: Likewise.
	* rtl-ssa/changes.h: New file.
	* rtl-ssa/changes.cc: Likewise.
	* rtl-ssa/functions.h: New file.
	* rtl-ssa/functions.cc: Likewise.
	* rtl-ssa/insn-utils.h: Likewise.
	* rtl-ssa/insns.h: New file.
	* rtl-ssa/insns.cc: Likewise.
	* rtl-ssa/internals.inl: Likewise.
	* rtl-ssa/is-a.inl: Likewise.
	* rtl-ssa/member-fns.inl: Likewise.
	* rtl-ssa/movement.h: Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/rtl.texi (RTL SSA): New node.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (simple_regno_set): Declare.
	* rtlanal.c (simple_regno_set): New function.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* rtlanal.h: New file.
	(MEM_REGNO): New constant.
	(rtx_obj_flags): New namespace.
	(rtx_obj_reference, rtx_properties): New classes.
	(growing_rtx_properties, vec_rtx_properties_base): Likewise.
	(vec_rtx_properties): New alias.
	* rtlanal.c: Include it.
	(rtx_properties::try_to_add_reg): New function.
	(rtx_properties::try_to_add_dest): Likewise.
	(rtx_properties::try_to_add_src): Likewise.
	(rtx_properties::try_to_add_pattern): Likewise.
	(rtx_properties::try_to_add_insn): Likewise.
	(vec_rtx_properties_base::grow): Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.h (insn_change_watermark): New class.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.h (insn_propagation): New class.
	* recog.c (insn_propagation::apply_to_mem_1): New function.
	(insn_propagation::apply_to_rvalue_1): Likewise.
	(insn_propagation::apply_to_lvalue_1): Likewise.
	(insn_propagation::apply_to_pattern_1): Likewise.
	(insn_propagation::apply_to_pattern): Likewise.
	(insn_propagation::apply_to_rvalue): Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.h (temporarily_undo_changes, redo_changes): Declare.
	* recog.c (temporarily_undone_changes): New variable.
	(validate_change_1, confirm_change_group): Check that it's zero.
	(cancel_changes): Likewise.
	(swap_change, temporarily_undo_changes): New functions.
	(redo_changes): Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.h (validate_change_xveclen): Declare.
	* recog.c (change_t::old_len): New field.
	(validate_change_1): Add a new_len parameter.  Conditionally
	replace the XVECLEN of an rtx, avoiding single-element PARALLELs.
	(validate_change_xveclen): New function.
	(cancel_changes): Undo changes made by validate_change_xveclen.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (simplify_context): New class.
	(simplify_unary_operation, simplify_binary_operation): Use it.
	(simplify_ternary_operation, simplify_relational_operation): Likewise.
	(simplify_subreg, simplify_gen_unary, simplify_gen_binary): Likewise.
	(simplify_gen_ternary, simplify_gen_relational): Likewise.
	(simplify_gen_subreg, lowpart_subreg): Likewise.
	* simplify-rtx.c (simplify_gen_binary): Turn into a member function
	of simplify_context.
	(simplify_gen_unary, simplify_gen_ternary, simplify_gen_relational)
	(simplify_truncation, simplify_unary_operation): Likewise.
	(simplify_unary_operation_1, simplify_byte_swapping_operation)
	(simplify_associative_operation, simplify_logical_relational_operation)
	(simplify_binary_operation, simplify_binary_operation_series)
	(simplify_distributive_operation, simplify_plus_minus): Likewise.
	(simplify_relational_operation, simplify_relational_operation_1)
	(simplify_cond_clz_ctz, simplify_merge_mask): Likewise.
	(simplify_ternary_operation, simplify_subreg, simplify_gen_subreg)
	(lowpart_subreg): Likewise.
	(simplify_binary_operation_1): Likewise.  Test mem_depth when
	deciding whether the ASHIFT or MULT form is canonical.
	(simplify_merge_mask): Use simplify_context.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (register_asm_p): Declare.
	* recog.c (verify_changes): Split out the test for whether
	a hard register is a register asm to...
	* rtlanal.c (register_asm_p): ...this new function.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* print-rtl.h (print_insn_with_notes): Declare.
	* print-rtl.c (print_insn_with_notes): Make non-static

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgrtl.h (update_cfg_for_uncondjump): Declare.
	* combine.c (update_cfg_for_uncondjump): Move to...
	* cfgrtl.c: ...here.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* vec.h (array_slice): New class.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* Makefile.in (OBJS): Add splay-tree-utils.o.
	* system.h: Include <array> when INCLUDE_ARRAY is defined.
	* selftest.h (splay_tree_cc_tests): Declare.
	* selftest-run-tests.c (selftest::run_tests): Run splay_tree_cc_tests.
	* splay-tree-utils.h: New file.
	* splay-tree-utils.tcc: Likewise.
	* splay-tree-utils.cc: Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* mux-utils.h: New file.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* obstack-utils.h: New file.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* iterator-utils.h (derived_iterator): New class.
	(const_derived_container, wrapper_iterator): Likewise.
	(list_iterator): Likewise.

2020-12-17  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (global_reg_set): Declare.
	* reginfo.c (global_reg_set): New variable.
	(init_reg_sets_1, globalize_reg): Update it when globalizing
	registers.

2020-12-16  Piotr Kubaj  <pkubaj@FreeBSD.org>

	* config.gcc (powerpc*le-*-freebsd*): Add.
	* configure.ac (powerpc*le-*-freebsd*): Ditto.
	* configure: Regenerate.
	* config/rs6000/freebsd64.h (ASM_SPEC_COMMON): Use ENDIAN_SELECT.
	(DEFAULT_ASM_ENDIAN): Add little endian support.
	(LINK_OS_FREEBSD_SPEC64): Ditto.

2020-12-16  Takayuki 'January June' Suwa  <jjsuwa_sys3175@yahoo.co.jp>

	* config/xtensa/xtensa.c (xtensa_emit_move_sequence): Try to
	replace 'l32r' with 'movi' + 'slli' when optimizing for size.
	* config/xtensa/xtensa.md (movdi): Split loading DI mode constant
	into register pair into two loads of SI mode constants.

2020-12-16  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_mve.h (__arm_vcmulq_rot90_f16):
	(__arm_vcmulq_rot270_f16, _arm_vcmulq_rot180_f16, __arm_vcmulq_f16,
	__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
	__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcmlaq_f16,
	__arm_vcmlaq_rot180_f16, __arm_vcmlaq_rot270_f16,
	__arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32, __arm_vcmlaq_rot180_f32,
	__arm_vcmlaq_rot270_f32, __arm_vcmlaq_rot90_f32): Update builtin calls.
	* config/arm/arm_mve_builtins.def (vcmulq_f, vcmulq_rot90_f,
	vcmulq_rot180_f, vcmulq_rot270_f, vcmlaq_f, vcmlaq_rot90_f,
	vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
	(vcmulq, vcmulq_rot90, vcmulq_rot180, vcmulq_rot270, vcmlaq,
	vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270): New.
	* config/arm/iterators.md (mve_rot): Add UNSPEC_VCMLA, UNSPEC_VCMLA90,
	UNSPEC_VCMLA180, UNSPEC_VCMLA270, UNSPEC_VCMUL, UNSPEC_VCMUL90,
	UNSPEC_VCMUL180, UNSPEC_VCMUL270.
	(VCMUL): New.
	* config/arm/mve.md (mve_vcmulq_f<mode, mve_vcmulq_rot180_f<mode>,
	mve_vcmulq_rot270_f<mode>, mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>,
	mve_vcmlaq_rot180_f<mode>, mve_vcmlaq_rot270_f<mode>,
	mve_vcmlaq_rot90_f<mode>): Removed.
	(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
	mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
	New.
	* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270, UNSPEC_VCMUL,
	UNSPEC_VCMUL180): New.
	(VCMULQ_F, VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F,
	VCMLAQ_F, VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F): Removed.

2020-12-16  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
	__arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
	__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16,
	__arm_vcaddq_rot90_s16, __arm_vcaddq_rot270_s16,
	__arm_vcaddq_rot90_u32, __arm_vcaddq_rot270_u32,
	__arm_vcaddq_rot90_s32, __arm_vcaddq_rot270_s32,
	__arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
	__arm_vcaddq_rot90_f32, __arm_vcaddq_rot270_f32):  Update builtin calls.
	* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
	vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f):
	Removed.
	(vcaddq_rot90, vcaddq_rot270): New.
	* config/arm/constraints.md (Dz): Include MVE.
	* config/arm/iterators.md (mve_rot): New.
	(supf): Remove VCADDQ_ROT270_S, VCADDQ_ROT270_U, VCADDQ_ROT90_S,
	VCADDQ_ROT90_U.
	(VCADDQ_ROT270, VCADDQ_ROT90): Removed.
	* config/arm/mve.md (mve_vcaddq_rot270_<supf><mode,
	mve_vcaddq_rot90_<supf><mode>, mve_vcaddq_rot270_f<mode>,
	mve_vcaddq_rot90_f<mode>): Removed.
	(mve_vcaddq<mve_rot><mode>, mve_vcaddq<mve_rot><mode>): New.
	* config/arm/unspecs.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S,
	VCADDQ_ROT270_U, VCADDQ_ROT90_U, VCADDQ_ROT270_F,
	VCADDQ_ROT90_F): Removed.
	* config/arm/vec-common.md (cadd<rot><mode>3): New.

2020-12-16  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-simd.md (cadd<rot><mode>3): New.
	* config/aarch64/iterators.md (SVE2_INT_CADD_OP): New.
	* config/aarch64/aarch64-sve.md (cadd<rot><mode>3): New.
	* config/aarch64/aarch64-sve2.md (cadd<rot><mode>3): New.

2020-12-16  Pat Haugen  <pthaugen@linux.ibm.com>

	* config/rs6000/mma.md (*movxo, mma_<vvi4i4i8>, mma_<avvi4i4i8>,
	mma_<vvi4i4i2>, mma_<avvi4i4i2>, mma_<vvi4i4>, mma_<avvi4i4>,
	mma_<pvi4i2>, mma_<apvi4i2>, mma_<vvi4i4i4>, mma_<avvi4i4i4>):
	Remove explicit setting of length attribute.

2020-12-16  Jakub Jelinek  <jakub@redhat.com>

	* varasm.c (default_elf_asm_named_section): Always force
	section flags even for sections with SECTION_LINK_ORDER flag.

2020-12-16  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98146
	* defaults.h (SUPPORTS_SHF_GNU_RETAIN): New.
	* varasm.c (get_section): Replace HAVE_GAS_SHF_GNU_RETAIN with
	SUPPORTS_SHF_GNU_RETAIN.
	(resolve_unique_section): Likewise.
	(get_variable_section): Likewise.
	(switch_to_section): Likewise.

2020-12-16  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98146
	* varasm.c (switch_to_section): Warn when a symbol without used
	attribute and a symbol with used attribute are placed in the
	section with the same name.

2020-12-16  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98146
	* output.h (switch_to_section): Add a tree argument, default to
	nullptr.
	* varasm.c (get_section): If the SECTION_RETAIN bit doesn't match,
	return and switch to a new section later.
	(assemble_start_function): Pass decl to switch_to_section.
	(assemble_variable): Likewise.
	(switch_to_section): If the SECTION_RETAIN bit doesn't match,
	switch to a new section.

2020-12-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96239
	* gimple-ssa-store-merging.c (find_bswap_or_nop): Handle a vector
	CONSTRUCTOR.
	(bswap_replace): Likewise.

2020-12-16  Martin Liska  <mliska@suse.cz>

	* common.opt: Remove usage of Report.
	* config/aarch64/aarch64.opt: Ditto.
	* config/alpha/alpha.opt: Ditto.
	* config/arc/arc.opt: Ditto.
	* config/arm/arm.opt: Ditto.
	* config/avr/avr.opt: Ditto.
	* config/bfin/bfin.opt: Ditto.
	* config/bpf/bpf.opt: Ditto.
	* config/c6x/c6x.opt: Ditto.
	* config/cr16/cr16.opt: Ditto.
	* config/cris/cris.opt: Ditto.
	* config/cris/elf.opt: Ditto.
	* config/csky/csky.opt: Ditto.
	* config/darwin.opt: Ditto.
	* config/fr30/fr30.opt: Ditto.
	* config/frv/frv.opt: Ditto.
	* config/ft32/ft32.opt: Ditto.
	* config/gcn/gcn.opt: Ditto.
	* config/i386/cygming.opt: Ditto.
	* config/i386/i386.opt: Ditto.
	* config/ia64/ia64.opt: Ditto.
	* config/ia64/ilp32.opt: Ditto.
	* config/linux-android.opt: Ditto.
	* config/linux.opt: Ditto.
	* config/lm32/lm32.opt: Ditto.
	* config/m32r/m32r.opt: Ditto.
	* config/m68k/m68k.opt: Ditto.
	* config/mcore/mcore.opt: Ditto.
	* config/microblaze/microblaze.opt: Ditto.
	* config/mips/mips.opt: Ditto.
	* config/mmix/mmix.opt: Ditto.
	* config/mn10300/mn10300.opt: Ditto.
	* config/moxie/moxie.opt: Ditto.
	* config/msp430/msp430.opt: Ditto.
	* config/nds32/nds32.opt: Ditto.
	* config/nios2/elf.opt: Ditto.
	* config/nios2/nios2.opt: Ditto.
	* config/nvptx/nvptx.opt: Ditto.
	* config/pa/pa.opt: Ditto.
	* config/pdp11/pdp11.opt: Ditto.
	* config/pru/pru.opt: Ditto.
	* config/riscv/riscv.opt: Ditto.
	* config/rl78/rl78.opt: Ditto.
	* config/rs6000/aix64.opt: Ditto.
	* config/rs6000/linux64.opt: Ditto.
	* config/rs6000/rs6000.opt: Ditto.
	* config/rs6000/sysv4.opt: Ditto.
	* config/rx/elf.opt: Ditto.
	* config/rx/rx.opt: Ditto.
	* config/s390/s390.opt: Ditto.
	* config/s390/tpf.opt: Ditto.
	* config/sh/sh.opt: Ditto.
	* config/sol2.opt: Ditto.
	* config/sparc/long-double-switch.opt: Ditto.
	* config/sparc/sparc.opt: Ditto.
	* config/tilegx/tilegx.opt: Ditto.
	* config/tilepro/tilepro.opt: Ditto.
	* config/v850/v850.opt: Ditto.
	* config/visium/visium.opt: Ditto.
	* config/vms/vms.opt: Ditto.
	* config/vxworks.opt: Ditto.
	* config/xtensa/xtensa.opt: Ditto.

2020-12-16  Martin Liska  <mliska@suse.cz>

	* doc/options.texi: Remove Report keyword.
	* opt-functions.awk: Print error when Report keyword
	is used.
	* optc-gen.awk: Do not handle Report keyword.
	* opts.h (struct cl_option): Remove cl_report bitfield flag.

2020-12-16  Martin Liska  <mliska@suse.cz>

	PR sanitizer/97868
	* common.opt: Add new warning -Wtsan.
	* doc/invoke.texi: Likewise.
	* tsan.c (instrument_builtin_call): Warn users about unsupported
	std::atomic_thread_fence.

2020-12-16  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/98271
	PR rtl-optimization/98276
	PR tree-optimization/98279
	* opts-common.c (set_option): Do not allow overflow for integer
	arguments.

2020-12-16  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/98272
	* tree-switch-conversion.c (bit_test_cluster::emit): When finding
	out whether the entry test can be merged in the bit test, do the
	computation using the type of the index expression.

2020-12-16  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
	paradoxical subreg instead of zero_extend for QI/HI promotion.

2020-12-16  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/66791
	* config/arm/arm_neon.h: Replace calls to __builtin_vcgt* by
	<, > operators in vclt and vcgt intrinsics respectively.
	* config/arm/arm_neon_builtins.def: Remove entry for
	vcgt and vcgtu.

2020-12-16  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/66791
	* config/arm/arm_neon.h: Replace calls to __builtin_vneg* by - operator
	in vneg intrinsics.
	* config/arm/arm_neon_builtins.def: Remove entry for vneg.

2020-12-16  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/66791
	* config/arm/arm_neon.h: Replace calls to __builtin_vcreate*
	in vcreate intrinsics.
	* config/arm/arm_neon_builtins.def: Remove entry for vcreate.

2020-12-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96094
	* match.pd (X / bool_range_Y -> X): New simplification.

2020-12-15  Nathan Sidwell  <nathan@acm.org>

	* doc/cppopts.texi: Document new cpp opt.
	* doc/invoke.texi: Add C++20 module option & documentation.

2020-12-15  Nathan Sidwell  <nathan@acm.org>

	* Makefile.in (CODYINC, CODYLIB, CODYLIB_H): New. Use them.

2020-12-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/98274
	* config/i386/i386-options.c (ix86_option_override_internal): Set
	ix86_tune_string to "generic" even when it wasn't specified and
	ix86_arch_string is "x86-64-v2", "x86-64-v3" or "x86-64-v4".
	Remove useless {}s around a single statement.

2020-12-15  Martin Liska  <mliska@suse.cz>

	PR lto/98275
	* lto-wrapper.c: Do not use -j0 when we are unable to detect
	number of cores.

2020-12-15  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386-options.c (ix86_option_override_internal): Don't
	error on -march=x86-64-v[234] with -m32 or -mabi=ms.
	* config.gcc: Don't reject --with-arch=x86-64-v[234] or
	--with-arch_32=x86-64-v[234].
	* doc/invoke.texi (-march=x86-64-v[234]): Document what the option
	does for other ABIs.

2020-12-15  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/98273
	* gcov.c (output_json_intermediate_file): Use stack of nested
	functions for lines in a source file.  Pop when a function ends.

2020-12-15  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (Instrumentation Options): Update link to
	KernelAddressSanitizer.

2020-12-15  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/predicates.md (addsubx_operand): Change accepted
	values from 2/4/8 to 1..3.
	* config/xtensa/xtensa.md (*addx, *subx): Change RTL pattern
	to use 'ashift' instead of 'mult'. Update operands[3] value.

2020-12-14  Piotr Kubaj  <pkubaj@FreeBSD.org>
	    Gerald Pfeifer  <gerald@pfeifer.com>

	* config/rs6000/freebsd64.h (PROCESSOR_DEFAULT): Update
	to PROCESSOR_PPC7450.
	(PROCESSOR_DEFAULT64): Update to PROCESSOR_POWER8.

2020-12-14  Martin Sebor  <msebor@redhat.com>

	PR middle-end/98166
	PR c++/57111
	PR middle-end/98160
	* builtins.c (check_access): Call tree_inlined_location
	fndecl_alloc_p): Handle BUILT_IN_ALIGNED_ALLOC and
	BUILT_IN_GOMP_ALLOC.
	call_dealloc_p): Remove unused function.
	(new_delete_mismatch_p): Call valid_new_delete_pair_p and rework.
	(matching_alloc_calls_p): Handle built-in deallocation functions.
	(warn_dealloc_offset): Corrct the handling of user-defined operators
	delete.
	(maybe_emit_free_warning): Avoid assuming expression is a decl.
	Simplify.
	* doc/extend.texi (attribute malloc): Update.
	* tree-ssa-dce.c (valid_new_delete_pair_p): Factor code out into
	valid_new_delete_pair_p in tree.c.
	* tree.c (tree_inlined_location): Define new function.
	(valid_new_delete_pair_p): Define.
	* tree.h (tree_inlined_location): Declare.
	(valid_new_delete_pair_p): Declare.

2020-12-14  Sebastian Pop  <spop@amazon.com>

	* config.gcc (aarch64*-*-*): Remove --with-{cpu,arch,tune}-32 flags.

2020-12-14  Wilco Dijkstra  <wdijkstr@arm.com>

	* config.gcc (aarch64*-*-*): Add --with-tune. Support --with-cpu=native.
	* config/aarch64/aarch64.h (OPTION_DEFAULT_SPECS): Add --with-tune.

2020-12-14  Martin Liska  <mliska@suse.cz>

	* gcov.c (output_json_intermediate_file): Update comments.

2020-12-14  Tamar Christina  <tamar.christina@arm.com>

	PR middle-end/98264
	* tree-vect-slp-patterns.c (linear_loads_p): Exclude TOP permute.

2020-12-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/mve.md (mve_vnegq_f): Use 'neg' instead of unspec.
	(mve_vnegq_s): Likewise.
	* config/arm/neon.md (neg<mode>2): Rename into neon_neg<mode>2.
	(<absneg_str><mode>2): Rename into neon_<absneg_str><mode>2.
	(neon_v<absneg_str><mode>): Call gen_neon_<absneg_str><mode>2.
	(vashr<mode>3): Call gen_neon_neg<mode>2.
	(vlshr<mode>3): Call gen_neon_neg<mode>2.
	(neon_vneg<mode>): Call gen_neon_neg<mode>2.
	* config/arm/unspecs.md (VNEGQ_F, VNEGQ_S): Remove.
	* config/arm/vec-common.md (neg<mode>2): New expander.

2020-12-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (VDQNOTM2): New mode iterator.
	(supf): Remove VMVNQ_S and VMVNQ_U.
	(VMVNQ): Remove.
	* config/arm/mve.md (mve_vmvnq_u<mode>): New entry for vmvn
	instruction using expression not.
	(mve_vmvnq_s<mode>): New expander.
	* config/arm/neon.md (one_cmpl<mode>2): Renamed into
	one_cmpl<mode>2_neon.
	* config/arm/unspecs.md (VMVNQ_S, VMVNQ_U): Remove.
	* config/arm/vec-common.md (one_cmpl<mode>2): New expander.

2020-12-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (supf): Remove VBICQ_S and VBICQ_U.
	(VBICQ): Remove.
	* config/arm/mve.md (mve_vbicq_u<mode>): New entry for vbic
	instruction using expression and not.
	(mve_vbicq_s<mode>): New expander.
	(mve_vbicq_f<mode>): Replace use of unspec by 'and not'.
	* config/arm/unspecs.md (VBICQ_S, VBICQ_U, VBICQ_F): Remove.

2020-12-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (supf): Remove VEORQ_S and VEORQ_U.
	(VEORQ): Remove.
	* config/arm/mve.md (mve_veorq_u<mode>): New entry for veor
	instruction using expression xor.
	(mve_veorq_s<mode>): New expander.
	(mve_veorq_f<mode>): Use 'xor' code instead of unspec.
	* config/arm/neon.md (xor<mode>3): Renamed into xor<mode>3_neon.
	* config/arm/unspecs.md (VEORQ_S, VEORQ_U, VEORQ_F): Remove.
	* config/arm/vec-common.md (xor<mode>3): New expander.

2020-12-14  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-cores.def (AARCH64_CORE): Add Cortex-A78C core.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Update docs.

2020-12-14  Nikhil Benesch  <nikhil.benesch@gmail.com>

	* godump.c (go_output_typedef): Suppress typedefs whose name
	matches the tag of the underlying struct, union, or enum.
	Output declarations for enums that do not appear in typedefs.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_output_int_move): Unify push operation
	selection.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_output_int_move): Check the correct
	operand for constant 0 push operation.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_expand_addsub_di_operands): Handle equal
	input operands with subtraction.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_expand_addsub_di_operands): Handle the
	addition or subtraction of 0.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_expand_addsub_di_operands): Remove
	unused register allocation.

2020-12-13  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (casesi): Use `gen_int_mode' rather than
	`GEN_INT' for the immediate used for lower bound adjustment.

2020-12-13  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98256
	* tree-ssa-math-opts.c (match_uaddsub_overflow): For BIT_NOT_EXPR,
	only handle a single use, and insert .ADD_OVERFLOW before the
	comparison rather than after the BIT_NOT_EXPR.  Return true iff
	it is BIT_NOT_EXPR and it has been removed.
	(math_opts_dom_walker::after_dom_children) <case BIT_NOT_EXPR>:
	If match_uaddsub_overflow returned true, continue instead of break.

2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	Revert:
	2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
	, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
	__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
	__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
	__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
	__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
	__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
	__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
	__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
	__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
	__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
	__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
	__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
	__arm_vcmlaq_rot90_f32): Update builtin calls.
	* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
	vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
	vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
	vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
	(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
	vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
	New.
	* config/arm/constraints.md (Dz): Include MVE.
	* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
	(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
	(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
	* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
	VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
	VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
	VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
	VCADDQ_ROT270, VCADDQ_ROT90): Removed.
	(mve_rot, VCMUL): New.
	(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
	mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
	mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
	mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
	mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
	(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
	mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
	New.
	(cmul<rot_op><mode>3): Exclude MVE types.
	* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
	* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
	arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
	* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
	UNSPEC_VCMLS180): New.
	* config/arm/neon.md (cmul<rot_op><mode>3): New.

2020-12-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/92469
	* varasm.c (eliminable_regno_p): New function.
	(make_decl_rtl): Reject asm vars for frame and argp
	if they are different from hard frame pointer.

2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
	, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
	__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
	__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
	__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
	__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
	__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
	__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
	__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
	__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
	__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
	__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
	__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
	__arm_vcmlaq_rot90_f32): Update builtin calls.
	* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
	vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
	vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
	vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
	(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
	vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
	New.
	* config/arm/constraints.md (Dz): Include MVE.
	* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
	(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
	(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
	* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
	VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
	VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
	VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
	VCADDQ_ROT270, VCADDQ_ROT90): Removed.
	(mve_rot, VCMUL): New.
	(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
	mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
	mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
	mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
	mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
	(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
	mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
	New.
	(cmul<rot_op><mode>3): Exclude MVE types.
	* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
	* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
	arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
	* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
	UNSPEC_VCMLS180): New.
	* config/arm/neon.md (cmul<rot_op><mode>3): New.

2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm.c (arm_preferred_simd_mode): Add E_HFmode.

2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-slp-patterns.c: New file.
	* Makefile.in: Add it.
	* doc/passes.texi: Document it.
	* internal-fn.def (COMPLEX_ADD_ROT90, COMPLEX_ADD_ROT270): New.
	* optabs.def (cadd90_optab, cadd270_optab): New.
	* doc/md.texi: Document them.
	* tree-vect-loop.c (vect_analyze_loop_2): Add dissolve code.
	* tree-vect-slp.c:
	(vect_free_slp_instance, vect_create_new_slp_node): Export.
	(vect_match_slp_patterns_2, vect_match_slp_patterns): New.
	(vect_analyze_slp): Use it.
	* tree-vectorizer.h (vect_free_slp_tree): Export.
	(enum _complex_operation): Forward declare.
	(class vect_pattern): New

2020-12-13  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-patterns.c (vect_mark_pattern_stmts): Remove static inline.
	* tree-vect-slp.c (vect_create_new_slp_node): Remove static and only
	set smts if valid.
	* tree-vectorizer.c (vec_info::add_pattern_stmt): New.
	(vec_info::set_vinfo_for_stmt): Optionally enforce read-only.
	* tree-vectorizer.h (struct _slp_tree): Use new types.
	(lane_permutation_t, lane_permutation_t): New.
	(vect_create_new_slp_node, vect_mark_pattern_stmts): New.

2020-12-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* doc/sourcebuild.texi (Commands for use in dg-final, Scan the
	assembly output, scan-assembler-symbol-section): Document.
	(scan-symbol-section): Document.

2020-12-13  Richard Sandiford  <richard.sandiford@arm.com>

	* is-a.h (reinterpret_is_a_helper): New class.
	(static_is_a_helper): Likewise.
	(is_a_helper): Inherit from reinterpret_is_a_helper.
	(is_a_helper<const T *>): New specialization.

2020-12-13  Richard Sandiford  <richard.sandiford@arm.com>

	* coretypes.h (iterator_range): Move to...
	* iterator-utils.h: ...this new file.

2020-12-13  Richard Sandiford  <richard.sandiford@arm.com>

	* rtlanal.c (noop_move_p): Don't check for REG_EQUAL notes.

2020-12-13  Richard Sandiford  <richard.sandiford@arm.com>

	* vec.h (vnull::operator vec<T, A, L>): Make const.

2020-12-12  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96685
	* match.pd (~(X - Y) -> ~X + Y): New optimization.
	(~X + Y -> (Y - X) - 1): Likewise.

2020-12-12  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96272
	* tree-ssa-math-opts.c (uaddsub_overflow_check_p): Add OTHER argument.
	Handle BIT_NOT_EXPR.
	(match_uaddsub_overflow): Optimize unsigned a > ~b into
	__imag__ .ADD_OVERFLOW (a, b).
	(math_opts_dom_walker::after_dom_children): Call match_uaddsub_overflow
	even for BIT_NOT_EXPR.

2020-12-12  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/98183
	* omp-low.c (lower_omp_target): Don't add OMP_RETURN for
	data regions.
	* omp-expand.c (expand_omp_target): Don't try to remove
	OMP_RETURN for data regions.
	(build_omp_regions_1, omp_make_gimple_edges): Don't expect
	OMP_RETURN for data regions.

2020-12-11  Nathan Sidwell  <nathan@acm.org>

	* gcc.c (cpp_unique_options): Add Mmodules, Mno-modules.
	* tree-core.h (enum tree_index): Add TI_MODULE_HWM.

2020-12-11  Jim Wilson  <jimw@sifive.com>

	* varasm.c (get_section): Add DECL_P check before DECL_PRESERVE_P.

2020-12-11  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (VDQ): Remove TARGET_HAVE_MVE
	conditions.
	* config/arm/vec-common.md (and<mode>3): Use
	ARM_HAVE_<MODE>_ARITH.
	(ior<mode>3): Likewise.

2020-12-11  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_active_insn): Ignore all non essential
	instructions when getting the next active instruction.
	(check_store_cacheline_hazard): Update.
	(workaround_arc_anomaly): Remove obsolete cache hazard code.

2020-12-11  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_reorg): Avoid limm in BRcc.

2020-12-11  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_scheduling_not_expected): Remove
	it.
	(arc_sets_cc_p): Likewise.
	(arc_need_delay): Likewise.
	* config/arc/arc.c (arc_sets_cc_p): Likewise.
	(arc_need_delay): Likewise.
	(arc_scheduling_not_expected): Likewise.
	* config/arc/arc.md: Convert adc/sbc patterns to simple
	instruction definitions.

2020-12-11  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (supf): Remove VORRQ_S and VORRQ_U.
	(VORRQ): Remove.
	* config/arm/mve.md (mve_vorrq_s<mode>): New entry for vorr
	instruction using expression ior.
	(mve_vorrq_u<mode>): New expander.
	(mve_vorrq_f<mode>): Use ior code instead of unspec.
	* config/arm/neon.md (ior<mode>3): Renamed into ior<mode>3_neon.
	* config/arm/predicates.md (imm_for_neon_logic_operand): Enable
	for MVE.
	* config/arm/unspecs.md (VORRQ_S, VORRQ_U, VORRQ_F): Remove.
	* config/arm/vec-common.md (ior<mode>3): New expander.

2020-12-11  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (mpyd<su_optab>_arcv2hs): New template
	pattern.
	(*pmpyd<su_optab>_arcv2hs): Likewise.
	(*pmpyd<su_optab>_imm_arcv2hs): Likewise.
	(mpyd_arcv2hs): Moved into above template.
	(mpyd_imm_arcv2hs): Moved into above template.
	(mpydu_arcv2hs): Likewise.
	(mpydu_imm_arcv2hs): Likewise.
	(su_optab): New optab prefix for sign/zero-extending operations.

2020-12-11  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98219
	* config/i386/uintrintrin.h (__uintr_frame): Remove uirrv.

2020-12-11  Andrea Corallo  <andrea.corallo@arm.com>

	* doc/sourcebuild.texi (arm_softfloat): Improve documentation.

2020-12-11  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/98229
	* optabs.c (expand_doubleword_mod): Canonicalize op1 and
	1 - INTVAL (op1) as word_mode constants when used in
	word_mode arithmetics.

2020-12-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98235
	* tree-vect-slp.c (vect_build_slp_tree): Exchange npermutes
	for limit.  Decrement that for each cache miss and fail
	discovery when it reaches zero.
	(vect_build_slp_tree_2): Remove npermutes handling and
	simply pass down limit.
	(vect_build_slp_instance): Use pass down limit.
	(vect_analyze_slp_instance): Likewise.
	(vect_analyze_slp): Base the SLP discovery limit on
	max_tree_size and pass it down.

2020-12-11  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/98190
	* expr.c (expand_assignment): If to_rtx is a promoted SUBREG,
	ensure sign or zero extension either through use of store_expr
	or by extending manually.

2020-12-11  Andrea Corallo  <andrea.corallo@arm.com>

	PR rtl-optimization/97092
	* ira-color.c (update_costs_from_allocno): Do not carry over mode
	between subsequent iterations.

2020-12-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95582
	* tree-vect-patterns.c (vect_recog_bool_pattern): Check
	for VECT_SCALAR_BOOLEAN_TYPE_P, not just precision one.

2020-12-11  Hongyu  <hongyu.wang@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Move check for HRESET/AVX_VNNI/UINTR out of avx512_usable.

2020-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/98212
	* dojump.c (do_compare_rtx_and_jump): Change computation of
	first_prob for and_them.  Add comment explaining and_them case.

2020-12-10  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/98174
	* gimple-range-cache.cc (ranger_cache::ssa_range_in_bb): Only push
	poor values to be examined if it isn't a pure global.
	(ranger_cache::block_range): Don't process pure globals.
	(ranger_cache::fill_block_cache): Adjust has_edge_range call.
	* gimple-range-gori.cc (gori_map::all_outgoing): New bitmap.
	(gori_map::gori_map): Allocate all_outgoing.
	(gori_map::is_export_p): No specified BB returns global context.
	(gori_map::calculate_gori): Accumulate each block into global.
	(gori_compute::gori_compute): Preprocess each block for exports.
	(gori_compute::has_edge_range_p): No edge returns global context.
	* gimple-range-gori.h (has_edge_range_p): Provide default parameter.

2020-12-10  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (loc_list_from_tree_1) <PLACEHOLDER_EXPR>: Deal with
	a nested context type

2020-12-10  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* cfgexpand.c (expand_gimple_basic_block): Remove special handling
	of debug_inline_entries without block info.
	* tree-inline.c (remap_gimple_stmt): Drop debug_nonbind_markers when
	the call statement has no block info.
	(copy_debug_stmt): Remove debug_nonbind_markers when inlining
	and the block info is mapped to NULL.
	* tree-ssa-live.c (clear_unused_block_pointer): Remove
	debug_nonbind_markers originating from removed inline functions.

2020-12-10  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vectorizable_assignment): Remove special
	allowance of VECTOR_BOOLEAN_TYPE_P conversions.

2020-12-10  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/iterators.md (supf): Remove VANDQ_S and VANDQ_U.
	(VANQ): Remove.
	(VDQ): Add TARGET_HAVE_MVE condition where relevant.
	* config/arm/mve.md (mve_vandq_u<mode>): New entry for vand
	instruction using expression 'and'.
	(mve_vandq_s<mode>): New expander.
	(mve_vaddq_n_f<mode>): Use 'and' code instead of unspec.
	* config/arm/neon.md (and<mode>3): Rename into and<mode>3_neon.
	* config/arm/predicates.md (imm_for_neon_inv_logic_operand):
	Enable for MVE.
	* config/arm/unspecs.md (VANDQ_S, VANDQ_U, VANDQ_F): Remove.
	* config/arm/vec-common.md (and<mode>3): New expander.

2020-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/98069
	* tree-data-ref.c (compute_distributive_range): New function.
	(nop_conversion_for_offset_p): Likewise.
	(split_constant_offset): In the internal overload, treat integer
	expressions as having an implicit cast to sizetype and express
	them accordingly.  Pass back the range of the original (uncast)
	expression in a new range parameter.
	(split_constant_offset_1): Likewise.  Rework the handling of
	conversions to account for the implicit sizetype casts.

2020-12-10  Joel Hutton  <joel.hutton@arm.com>

	PR tree-optimization/97929
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Add
	WIDEN_PLUS/WIDEN_MINUS case.

2020-12-10  Joel Hutton  <joel.hutton@arm.com>

	* tree-pretty-print.c (dump_generic_node): Add case for
	VEC_WIDEN_(PLUS/MINUS)_(HI/LO)_EXPR and WIDEN_(PLUS/MINUS)_EXPR.

2020-12-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98211
	* tree-vect-stmts.c (vectorizable_assignment): Disallow
	invalid conversions to bool vector types.

2020-12-10  Alexandre Oliva  <oliva@adacore.com>

	* tree.c (build_common_builtin_nodes): Drop __builtin_ from
	__clear_cache libname.

2020-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/98212
	* dojump.c (do_compare_rtx_and_jump): When splitting NE and backend
	can do UNEQ, prefer splitting x != y into x unord y || !(x uneq y)
	instead of into x unord y || x ltgt y.

2020-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98169
	* dojump.c (do_compare_rtx_and_jump): Don't split self-EQ/NE
	comparisons, just use ORDERED or UNORDERED.

2020-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/98205
	* omp-expand.c (expand_omp_for_generic): Fix up broken_loop handling.

2020-12-10  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Do
	not mark the defs to occur in a pattern if it is the
	pattern root and record the original stmt defs in that
	case.

2020-12-10  Simon Cook  <simon.cook@embecosm.com>

	* config/riscv/multilib-generator (arch_canonicalize): Invoke
	python interpreter when calling arch-canonicalize script.

2020-12-10  Nikhil Benesch  <nikhil.benesch@gmail.com>

	* godump.c (go_format_type): Don't consider whether a type has
	been seen when determining whether to output a type by name.
	Consider only the use_type_name parameter.
	(go_output_typedef): When outputting a typedef, format the
	declaration's original type, which contains the name of the
	underlying type rather than the name of the typedef.

2020-12-09  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/98188
	* tree-ssa-phiopt.c (two_value_replacement): Don't special case
	BOOLEAN_TYPEs for ranges, instead if get_range_info doesn't return
	VR_RANGE, set min/max to wi::min/max_value.

2020-12-09  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-option-extensions.def
	(AARCH64_OPT_EXTENSION): New +pauth option in -march for AArch64.
	* config/aarch64/aarch64.h (AARCH64_FL_PAUTH): New pauth extension bitmask.
	(AARCH64_ISA_PUATH): New ISA bitmask for PAUTH.
	(AARCH64_FL_FOR_ARCH8_3): Add PAUTH to Armv8.3-A.
	(TARGET_PAUTH): New target mask to isolate PAUTH instructions.
	* config/aarch64/aarch64.md (do_return): Condition set to TARGET_PAUTH.
	* doc/invoke.texi: Update docs for +flagm and +pauth.

2020-12-09  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (REG_ALLOC_ORDER): Remove

2020-12-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98213
	* tree-ssa-loop-im.c (sm_seq_valid_bb): Cache successfully
	processed PHIs.
	(hoist_memory_references): Adjust.

2020-12-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-protos.h (cpu_vector_cost): Move simd
	fields to...
	(simd_vec_cost): ... Here.  Define.
	(advsimd_vec_cost): Define.
	(sve_vec_cost): Define.
	* config/aarch64/aarch64.c (generic_advsimd_vector_cost):
	Define.
	(generic_sve_vector_cost): Likewise.
	(generic_vector_cost): Update.
	(qdf24xx_advsimd_vector_cost): Define.
	(qdf24xx_vector_cost): Update.
	(thunderx_advsimd_vector_cost): Define.
	(thunderx_vector_cost): Update.
	(tsv110_advsimd_vector_cost): Define.
	(tsv110_vector_cost): Likewise.
	(cortexa57_advsimd_vector_cost): Define.
	(cortexa57_vector_cost): Update.
	(exynosm1_advsimd_vector_cost): Define.
	(exynosm1_vector_cost): Update.
	(xgene1_advsimd_vector_cost): Define.
	(xgene1_vector_cost): Update.
	(thunderx2t99_advsimd_vector_cost): Define.
	(thunderx2t99_vector_cost): Update.
	(thunderx3t110_advsimd_vector_cost): Define.
	(thunderx3t110_vector_cost): Update.
	(aarch64_builtin_vectorization_cost): Handle sve and advsimd
	vector cost fields.

2020-12-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/98199
	* fold-const.c (native_encode_initializer): Fix handling bit-fields
	when off > 0.

2020-12-09  Jakub Jelinek  <jakub@redhat.com>

	PR c++/98193
	* fold-const.c (native_encode_initializer): Set pos to field's
	byte position if iterating over a field with missing initializer.

2020-12-08  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/98182
	* gimple-if-to-switch.cc (pass_if_to_switch::execute): Request
	chain linkage through false edges only.

2020-12-08  Nathan Sidwell  <nathan@acm.org>

	* tree.h (DECL_ALIGN_RAW): New.
	(DECL_ALIGN): Use it.
	(DECL_WARN_IF_NOT_ALIGN_RAW): New.
	(DECL_WARN_IF_NOT_ALIGN): Use it.
	(SET_DECL_WARN_IF_NOT_ALIGN): Likewise.

2020-12-08  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/66791
	* config/arm/arm_neon.h: Replace calls to __builtin_vmvn* by ~
	in vmvn intrinsics.
	* config/arm/arm_neon_builtins.def: Remove entry for vmvn.

2020-12-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/94440
	* config/i386/i386.opt (ix86_excess_precision,
	ix86_unsafe_math_optimizations): New TargetVariables.
	* config/i386/i386.h (X87_ENABLE_ARITH, X87_ENABLE_FLOAT): Use
	ix86_unsafe_math_optimizations instead of
	flag_unsafe_math_optimizations and ix86_excess_precision instead of
	flag_excess_precision.
	* config/i386/i386.c (ix86_excess_precision): Rename to ...
	(ix86_get_excess_precision): ... this.
	(TARGET_C_EXCESS_PRECISION): Define to ix86_get_excess_precision.
	* config/i386/i386-options.c (ix86_valid_target_attribute_tree,
	ix86_option_override_internal): Update ix86_unsafe_math_optimization
	from flag_unsafe_math_optimizations and ix86_excess_precision
	from flag_excess_precision when constructing target option nodes.
	(ix86_set_current_function): If flag_unsafe_math_optimizations
	or flag_excess_precision is different from the one recorded
	in TARGET_OPTION_NODE, create a new target option node for the
	current function and switch to that.

2020-12-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98192
	* tree-vect-slp.c (vect_build_slp_instance): Get scalar_stmts
	by reference.

2020-12-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98191
	* tree-vect-slp.c (vect_slp_check_for_constructors): Do not
	follow a non-SSA def chain.

2020-12-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97559
	* tree-ssa-sink.c (statement_sink_location): Never ignore
	PHIs on sink paths in irreducible regions.

2020-12-08  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/97872
	* gimple-isel.cc (gimple_expand_vec_cond_expr): Try to fold
	x CMP y ? -1 : 0 to x CMP y.

2020-12-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98180
	* tree-vect-slp.c (vect_slp_check_for_constructors): Check the
	first inserted value has a def.

2020-12-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/96344
	* tree-switch-conversion.c (bit_test_cluster::emit): Compute the
	range only if an entry test is necessary.  Merge the entry test in
	the bit test when possible.  Use PREC local variable consistently.
	When there is only one test, do a single gimplification at the end.

2020-12-08  Kito Cheng  <kito.cheng@sifive.com>

	PR target/98152
	* config.gcc (riscv*-*-*): Checking python, python3 or python2
	is available, and skip doing with_arch canonicalize if no python
	available.

2020-12-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/98147
	* builtins.c (default_emit_call_builtin___clear_cache): Call
	convert_memory_address to ptr_mode on both begin and end.

2020-12-07  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* ipa-param-manipulation.c
	(ipa_param_body_adjustments::modify_call_stmt): Set location info.

2020-12-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/extend.texi (used function attribute): Document saving
	the declaration from linker garbage collection.
	(used variable attribute): Likewise.

2020-12-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98113
	* tree-vectorizer.h (struct slp_root): New.
	(_bb_vec_info::roots): New member.
	* tree-vect-slp.c (vect_analyze_slp): Also walk BB info
	roots.
	(_bb_vec_info::_bb_vec_info): Adjust.
	(_bb_vec_info::~_bb_vec_info): Likewise.
	(vld_cmp): New.
	(vect_slp_is_lane_insert): Likewise.
	(vect_slp_check_for_constructors): Match a series of
	BIT_INSERT_EXPRs as vector constructor.
	(vect_slp_analyze_bb_1): Continue if BB info roots is
	not empty.
	(vect_slp_analyze_bb_1): Mark the whole BIT_INSERT_EXPR root
	sequence as pure_slp.

2020-12-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98117
	* tree-vect-loop-manip.c (vect_gen_vector_loop_niters):
	Properly handle degenerate niter when setting the vector
	loop IV range.

2020-12-07  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_emit_stack_probe): Change Pmode to
	word_mode.

2020-12-07  Martin Jambor  <mjambor@suse.cz>

	PR ipa/97816
	* ipa-cp.c (safe_add): Removed.
	(good_cloning_opportunity_p): Remove special handling of INT_MAX.
	(value_topo_info<valtype>::propagate_effects): Take care not to
	propagate from size one value to another through more sources.  Scale
	propagated times with edge frequencies.  Include local time and size
	in propagates ones here.  Take care not to overflow size.
	(decide_about_value): Do not add local and propagated effects when
	passing them to good_cloning_opportunity_p.

2020-12-07  Matthias Klose  <doko@ubuntu.com>

	* genextract.c (print_header): Undefine ENABLE_RTL_CHECKING
	and ENABLE_RTL_FLAG_CHECKING.

2020-12-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98137
	* tree-data-ref.c (split_constant_offset_1): Use
	determine_value_range instead of get_range_info to handle
	arbitrary expressions.

2020-12-06  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98162
	* doc/extend.texi: Remove -mcet.

2020-12-06  H.J. Lu  <hjl.tools@gmail.com>

	PR target/98161
	* config/i386/i386-features.c (pseudo_reg_set): Check mode of
	pseudo register push.

2020-12-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96232
	* tree-ssa-phiopt.c (two_value_replacement): Optimize even boolean lhs
	cases as long as arg0 has wider precision and conditional_replacement
	doesn't handle that case.
	(tree_ssa_phiopt_worker): Don't call two_value_replacement during
	early phiopt.

2020-12-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96232
	* match.pd (-(type)!A -> (type)A - 1): New optimization.

2020-12-05  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
	    David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/xcoff.h (ASM_OUTPUT_DEF): Reference macro arguments.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	PR target/95294
	* config/vax/elf.h (REGISTER_NAMES): Append `%psl'.
	* config/vax/vax-modes.def (CCN, CCNZ, CCZ): New modes.
	* config/vax/vax-protos.h (vax_select_cc_mode): New prototype.
	(vax_maybe_split_dimode_move): Likewise.
	(vax_notice_update_cc): Remove prototype.
	* config/vax/vax.c (TARGET_FLAGS_REGNUM): New macro.
	(TARGET_CC_MODES_COMPATIBLE): Likewise.
	(TARGET_MD_ASM_ADJUST): Likewise.
	(vax_select_cc_mode): New function
	(vax_cc_modes_compatible): Likewise.
	(vax_md_asm_adjust): Likewise.
	(vax_notice_update_cc): Remove function.
	(vax_output_int_move): Factor out code checking if a DImode move
	may have to be split...
	(vax_maybe_split_dimode_move): ... into this new function.
	* config/vax/vax.h (FIRST_PSEUDO_REGISTER): Bump up.
	(FIXED_REGISTERS): Append an entry for PSL.
	(CALL_USED_REGISTERS): Likewise.
	(NOTICE_UPDATE_CC, OUTPUT_JUMP): Remove macros.
	(SELECT_CC_MODE): New macro.
	(REGISTER_NAMES): Append `psl'.
	* config/vax/predicates.md (const_zero_operand)
	(vax_cc_comparison_operator, vax_ccn_comparison_operator)
	(vax_ccnz_comparison_operator, vax_ccz_comparison_operator):
	New predicates.
	* config/vax/builtins.md: Rewrite for MODE_CC representation.
	* config/vax/vax.md: Likewise.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/elf.h (VAX_CC1_SPEC, VAX_CC1PLUS_SPEC): New macros.
	* config/vax/netbsd-elf.h (CC1_SPEC): Use VAX_CC1_SPEC rather
	than VAX_CC1_AND_CC1PLUS_SPEC.
	(CC1PLUS_SPEC): Use VAX_CC1PLUS_SPEC rather than
	VAX_CC1_AND_CC1PLUS_SPEC.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/pdp11/pdp11.md (fcc_cc, fcc_ccnz): Use
	`const_double_zero' to express double zero constant.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* read-rtl.c (rtx_reader::read_rtx_code): Handle syntactic
	`const_double_zero' rtx.
	* doc/rtl.texi (Constant Expression Types): Document it.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (divmoddisi4, *amulsi4): Make the comment
	notation consistent with the rest of the file.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (movti): Fix output predicate.  Emit `movo'
	rather than `movh'.
	(divmoddisi4): Fix output predicates, correct RTL.
	(*amulsi4): Name insn.  Fix output predicate.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (mulsidi3): Fix the multiplicand predicates.
	(*maddsidi4, *maddsidi4_const): Likewise.  Name insns.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (*cmpv_2): Name insn.
	(*cmpv, *cmpzv, *cmpzv_2): Likewise.  Fix location predicate and
	constraint.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (extv): Rename insn to...
	(*extv): ... this.
	(extv): New expander.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (*insv_aligned, *extzv_aligned)
	(*extv_aligned): Also make sure the memory address of a bit-field
	location can be adjusted in the PIC mode.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (*insv_aligned, *extzv_aligned)
	(*extv_aligned): Reject register bit-field locations that are not
	aligned to the least significant bit; update output statement
	accordingly.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (*insv_aligned, *extzv_aligned)
	(*extv_aligned, *extv_non_const, *extzv_non_const): Name insns.
	Fix location predicate.
	(*extzv): Name insn.
	(*insv): Likewise.  Fix location constraint.
	(*insv_2): Likewise, and the predicate.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md (cpymemhi1): Rename insn to...
	(movmemhi1): ... this.
	(cpymemhi): Update accordingly.  Remove constraints.
	(movmemhi): New expander.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md: Add a peephole2 for QImode and HImode
	`ctz' operations.
	(any_extend): New code iterator.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md (width): New mode attribute.
	(ffssi2): Rework expander into...
	(ffs<mode>2): ... this.
	(ctzsi2): Rework insn into...
	(ctz<mode>2): ... this.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md (ffssi2_internal): Rename insn to...
	(ctzsi2): ... this.  Update the RTL operation.
	(ffssi2): Update accordingly.
	* config/vax/vax.c (vax_notice_update_cc): Handle CTZ.
	* config/vax/vax.h (CTZ_DEFINED_VALUE_AT_ZERO): New macro.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.md: Include `builtins.md'.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/predicates.md (volatile_mem_operand)
	(any_memory_operand): New predicates.
	* config/vax/builtins.md (VUNSPEC_UNLOCK): Remove constant.
	(sync_lock_test_and_set<mode>): Remove `set' and `unspec'
	operations, match operands only.  Reformat.
	(sync_lock_release<mode>): Likewise.  Remove cruft.
	(jbb<ccss>i<mode>): Wrap into `unspec_volatile', use
	`any_memory_operand' predicate.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md (bit): New int iterator.
	(ccss): New int attribute.
	(jbbssi<mode>, jbbcci<mode>): Fold insns into...
	(jbb<ccss>i<mode>): ... this.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md (bb_mem): New mode attribute.
	(jbbssiqi, jbbssihi, jbbssisi): Fold insns into...
	(jbbssi<mode>): ... this.
	(jbbcciqi, jbbccihi, jbbccisi): Likewise...
	(jbbcci<mode>): ... this.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* jump.c (pc_set): Also accept a jump wrapped in UNSPEC or
	UNSPEC_VOLATILE.
	(any_uncondjump_p, any_condjump_p): Update comment accordingly.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* loop-doloop.c (add_test): Only remove the jump if `onlyjump_p'.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* cfgrtl.c (rtl_block_empty_p): Return false if `!onlyjump_p'
	too.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* sel-sched-ir.c (maybe_tidy_empty_bb): Only try to remove a
	conditional jump if `onlyjump_p'.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* loop-iv.c (simplify_using_initial_values): Only process jumps
	that match `onlyjump_p'.
	(check_simple_exit): Likewise.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* ifcvt.c (dead_or_predicable) [!IFCVT_MODIFY_TESTS]: Bail out
	if `!onlyjump_p'.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* read-rtl.c: Add a page-feed separator at the start of iterator
	code.
	(struct iterator_group): Change the return type to HOST_WIDE_INT
	for the `find_builtin' member.  Likewise the second parameter
	type for the `apply_iterator' member.
	(atoll) [!HAVE_ATOQ]: Reorder.
	(find_mode, find_code): Change the return type to HOST_WIDE_INT.
	(apply_mode_iterator, apply_code_iterator)
	(apply_subst_iterator): Change the second parameter type to
	HOST_WIDE_INT.
	(find_int): Handle input suitable for HOST_WIDE_INT output.
	(apply_int_iterator): Rewrite in terms of explicit format
	interpretation.
	(rtx_reader::read_rtx_operand) <'w'>: Fold into...
	<'i', 'n', 'p'>: ... this.
	* doc/md.texi (Int Iterators): Document 'w' rtx format support.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/builtins.md (ffssi2): Make preparation statements
	actually buildable.
	(ffssi2_internal): Fix input constraints; make the RTL pattern
	match reality for `cc0'.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_address_cost): Express the cost in terms
	of COSTS_N_INSNS.
	(vax_rtx_costs): Likewise.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/constraints.md (A): New constraint.
	* config/vax/predicates.md (external_symbolic_operand)
	(external_const_operand): Remove predicates.
	(local_symbolic_operand): Rename to...
	(pic_symbolic_operand): ... this, and rework.
	(external_memory_operand): Rename to...
	(non_pic_external_memory_operand): ... this, and rework.
	(illegal_blk_memory_operand, illegal_addsub_di_memory_operand):
	Update accordingly.
	* config/vax/vax-protos.h (vax_acceptable_pic_operand_p): New
	prototype.
	* config/vax/vax.c (vax_acceptable_pic_operand_p): New function.
	(vax_output_int_add): Update according to predicate rework.
	* config/vax/vax.h (LEGITIMATE_PIC_OPERAND_P): New macro.
	* config/vax/vax.md (pushlclsymreg, pushextsymreg): Fold
	together, and rename to...
	(*pushsymreg): ... this.  Use the `pic_symbolic_operand'
	predicate and the `A' constraint for the displacement operand.
	(movlclsymreg, movextsymreg): Fold together, and rename to...
	(*movsymreg): ... this.  Use the `pic_symbolic_operand'
	predicate and the `A' constraint for the displacement operand.
	(pushextsym, pushlclsym): Fold together, and rename to...
	(*pushsym): ... this.  Use the `pic_symbolic_operand' predicate
	and the `A' constraint for the displacement operand.
	(movextsym, movlclsym): Fold together, and rename to...
	(*movsym): ... this.  Use the `pic_symbolic_operand' predicate
	and the `A' constraint for the displacement operand.

2020-12-05  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (print_operand): Replace `c' and `C' with
	`k' and `K' respectively.
	* config/vax/vax.md (*branch, *branch_reversed): Update
	accordingly.

2020-12-05  Matt Thomas  <matt@3am-software.com>
	    Maciej W. Rozycki  <macro@linux-mips.org>

	PR target/58901
	* reload.c (push_reload): Also reload the inner expression of a
	SUBREG for pseudos associated with a mode-dependent memory
	reference.
	(find_reloads): Force a reload likewise.

2020-12-05  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/97421
	* modulo-sched.c (generate_prolog_epilog): Remove forward
	declaration, adjust last argument name and type.
	(const_iteration_count): Add bool pointer parameter to return
	whether count register is read in pre-header after its
	initialization.
	(sms_schedule): Fix count register initialization adjustment
	procedure according to what const_iteration_count said.

2020-12-05  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/97865
	* configure: Regenerate.

2020-12-05  Venkataramanan Kumar  <Venkataramanan.Kumar@amd.com>
	    Sharavan Kumar  <Shravan.Kumar@amd.com>

	* common/config/i386/cpuinfo.h (get_amd_cpu) recognize znver3.
	* common/config/i386/i386-common.c (processor_names): Add
	znver3.
	(processor_alias_table): Add znver3 and AMDFAM19H entry.
	* common/config/i386/i386-cpuinfo.h (processor_types): Add
	AMDFAM19H.
	(processor_subtypes): AMDFAM19H_ZNVER3.
	* config.gcc (i[34567]86-*-linux* | ...): Likewise.
	* config/i386/driver-i386.c: (host_detect_local_cpu): Let
	-march=native recognize znver3 processors.
	* config/i386/i386-c.c (ix86_target_macros_internal): Add
	znver3.
	* config/i386/i386-options.c (m_znver3): New definition.
	(m_ZNVER): Include m_znver3.
	(processor_cost_table): Add znver3.
	* config/i386/i386.c (ix86_reassociation_width): Likewise.
	* config/i386/i386.h (TARGET_znver3): New definition.
	(enum processor_type): Add PROCESSOR_ZNVER3.
	* config/i386/i386.md (define_attr "cpu"): Add znver3.
	* config/i386/x86-tune-sched.c: (ix86_issue_rate): Likewise.
	(ix86_adjust_cost): Likewise.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS:
	Likewise.
	* config/i386/znver1.md: Add new reservations for znver3.
	* doc/extend.texi: Add details about znver3.
	* doc/invoke.texi: Likewise.

2020-12-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/96226
	* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
	splitter after *<rotate_insn><mode>3_mask_1): Drop the masking from
	the patterns to split into.

2020-12-04  Jason Merrill  <jason@redhat.com>

	* vec.h (begin, end): Add overloads for vec*.
	* tree.c (build_constructor_from_vec): Remove *.

2020-12-04  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Change PTR_SIZE to POINTER_SIZE_UNITS.

2020-12-04  Hans-Peter Nilsson  <hp@axis.com>
	    Martin Sebor  <msebor@redhat.com>

	PR middle-end/94600
	* doc/implement-c.texi (Qualifiers implementation): Add blurb
	about access to the whole of a volatile aggregate object, only for
	same-size as a scalar object.

2020-12-04  Jakub Jelinek  <jakub@redhat.com>

	PR c++/98130
	* gimple.c (gimple_call_fnspec): Only return ".co " for replaceable
	operator delete or ".mC" for replaceable operator new called from
	new/delete.

2020-12-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/96226
	* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
	splitter after *<rotate_insn><mode>3_mask_1): New combine splitters.

2020-12-04  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/93121
	* fold-const.c (native_encode_initializer): Use build_zero_cst
	instead of build_constructor.

2020-12-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/98100
	* cfgexpand.c (expand_gimple_basic_block): For vars with
	vector type, use TYPE_MODE rather than DECL_MODE.

2020-12-04  Jakub Jelinek  <jakub@redhat.com>

	* common.opt (-gdwarf32, -gdwarf64): New options.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Default
	dwarf_offset_size to 8 if not overridden from the command line.
	* dwarf2out.c: Change all occurrences of DWARF_OFFSET_SIZE to
	dwarf_offset_size.
	* doc/invoke.texi (-gdwarf32, -gdwarf64): Document.

2020-12-04  Martin Liska  <mliska@suse.cz>

	* doc/tm.texi: Change argument of the record_gcc_switches
	hook and remove SWITCH_TYPE_* enum values.
	* dwarf2out.c (gen_producer_string): Move to opts.c and remove
	handling of the dwarf_record_gcc_switches option.
	(dwarf2out_early_finish): Use moved gen_producer_string
	function.
	* opts.c (gen_producer_string): New.
	* opts.h (gen_producer_string): New.
	* target.def: Change type of record_gcc_switches.
	* target.h (enum print_switch_type): Remove.
	(elf_record_gcc_switches): Change first argument.
	* toplev.c (MAX_LINE): Remove.
	(print_to_asm_out_file):  Likewise.
	(print_to_stderr): Likewise.
	(print_single_switch): Likewise.
	(print_switch_values): Likewise.
	(init_asm_output): Use new gen_producer_string function.
	(process_options): Likewise.
	* varasm.c (elf_record_gcc_switches): Just save the string argument
	to the ELF container.

2020-12-04  Eric Botcazou  <ebotcazou@adacore.com>

	* ipa-sra.c (verify_access_tree_1): Relax assertion on the size.

2020-12-04  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Add missing params.

2020-12-03  Martin Sebor  <msebor@redhat.com>

	PR c++/90629
	PR middle-end/94527
	* builtins.c (access_ref::access_ref): Initialize new member.
	(compute_objsize): Use access_ref::deref.  Handle simple pointer
	assignment.
	(expand_builtin): Remove handling of the free built-in.
	(call_dealloc_argno): Same.
	(find_assignment_location): New function.
	(fndecl_alloc_p): Same.
	(gimple_call_alloc_p): Same.
	(call_dealloc_p): Same.
	(matching_alloc_calls_p): Same.
	(warn_dealloc_offset): Same.
	(maybe_emit_free_warning): Same.
	* builtins.h (struct access_ref): Declare new member.
	(maybe_emit_free_warning): Make extern.  Make use of access_ref.
	Handle -Wmismatched-new-delete.
	* calls.c (initialize_argument_information): Call
	maybe_emit_free_warning.
	* doc/extend.texi (attribute malloc): Update.
	* doc/invoke.texi (-Wfree-nonheap-object): Expand documentation.
	(-Wmismatched-new-delete): Document new option.
	(-Wmismatched-dealloc): Document new option.

2020-12-03  Alexandre Oliva  <oliva@adacore.com>

	* tree.c (build_common_builtin_nodes): Declare
	__builtin___clear_cache for all languages.
	* builtins.c (maybe_emit_call_builtin___clear_cache): Accept
	Pmode arguments.

2020-12-03  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/arm/t-rtems: Add "-mthumb -mcpu=cortex-r52
	-mfloat-abi=hard" multilib.

2020-12-03  Uroš Bizjak  <ubizjak@gmail.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/98086
	* config/i386/i386.c (ix86_md_asm_adjustmd): Rewrite
	zero-extension part to use convert_to_mode.

2020-12-03  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("@probe_stack2<mode>"): Change mode
	iterator to W.

2020-12-03  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-base.cc (svundef_impl::fold):
	Delete.

2020-12-03  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/98099
	* expmed.c (flip_storage_order): In the case of a non-integer mode,
	sorry out if the integer mode to be used instead is not supported.

2020-12-03  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/98082
	* function.c (use_register_for_decl): Also return true for a result
	if cfun->tail_call_marked is true.

2020-12-03  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/93121
	* fold-const.h (native_encode_initializer): Add mask argument
	defaulted to nullptr.
	(find_bitfield_repr_type): Declare.
	(native_interpret_aggregate): Declare.
	* fold-const.c (find_bitfield_repr_type): New function.
	(native_encode_initializer): Add mask argument and support for
	filling it.  Handle also some bitfields without integral
	DECL_BIT_FIELD_REPRESENTATIVE.
	(native_interpret_aggregate): New function.
	* gimple-fold.h (clear_type_padding_in_mask): Declare.
	* gimple-fold.c (struct clear_padding_struct): Add clear_in_mask
	member.
	(clear_padding_flush): Handle buf->clear_in_mask.
	(clear_padding_union): Copy clear_in_mask.  Don't error if
	buf->clear_in_mask is set.
	(clear_padding_type): Don't error if buf->clear_in_mask is set.
	(clear_type_padding_in_mask): New function.
	(gimple_fold_builtin_clear_padding): Set buf.clear_in_mask to false.
	* doc/extend.texi (__builtin_bit_cast): Document.

2020-12-03  Ilya Leoshkevich  <iii@linux.ibm.com>

	* tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest):
	Do not allow __builtin_constant_p on a threading path.

2020-12-03  Ilya Leoshkevich  <iii@linux.ibm.com>

	* tree-ssa-strlen.c (printf_strlen_execute): Avoid division by
	0.

2020-12-03  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator (arch_canonicalize): Move
	code to arch-canonicalize, and call that script to canonicalize arch
	string.
	(canonical_order): Move code to arch-canonicalize.
	(LONG_EXT_PREFIXES): Ditto.
	(IMPLIED_EXT): Ditto.
	* config/riscv/arch-canonicalize: New.
	* config.gcc (riscv*-*-*): Canonicalize --with-arch.

2020-12-03  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-option-extensions.def
	(AARCH64_OPT_EXTENSION): New +flagm option in -march for AArch64.
	* config/aarch64/aarch64.h (AARCH64_FL_FLAGM): Add new flagm extension bit
	mask.
	(AARCH64_FL_FOR_ARCH8_4): Add flagm to Armv8.4-A.
	* doc/invoke.texi: Update docs with +flagm.

2020-12-03  liuhongt  <hongtao.liu@intel.com>

	PR target/96906
	* config/i386/sse.md
	(<avx512>_ucmp<mode>3<mask_scalar_merge_name>): Add a new
	define_split after this insn.

2020-12-03  liuhongt  <hongtao.liu@intel.com>

	PR target/97642
	* config/i386/i386-expand.c
	(ix86_expand_special_args_builtin): Don't move all-ones mask
	operands into register.
	* config/i386/sse.md (UNSPEC_MASKLOAD): New unspec.
	(*<avx512>_load<mode>_mask): New define_insns for masked load
	instructions.
	(<avx512>_load<mode>_mask): Changed to define_expands which
	specifically handle memory or all-ones mask operands.
	(<avx512>_blendm<mode>): Changed to define_insns which are same
	as original <avx512>_load<mode>_mask with adjustment of
	operands order.
	(*<avx512>_load<mode>): New define_insn_and_split which is
	used to optimize for masked load with all one mask.

2020-12-03  Hongyu Wang  <hongyu.wang@intel.com>

	PR target/97770
	* config/i386/sse.md (popcount<mode>2): New expander
	for SI/DI vector modes.
	(popcount<mode>2): Likewise for QI/HI vector modes.

2020-12-03  Alexandre Oliva  <oliva@adacore.com>

	* builtins.c (default_emit_call_builtin___clear_cache): New.
	(maybe_emit_call_builtin___clear_cache): New.
	(expand_builtin___clear_cache): Split into the above.
	(expand_builtin): Do not issue clear_cache call any more.
	* builtins.h (maybe_emit_call_builtin___clear_cache): Declare.
	* config/aarch64/aarch64.c (aarch64_trampoline_init): Use
	maybe_emit_call_builtin___clear_cache.
	* config/arc/arc.c (arc_trampoline_init): Likewise.
	* config/arm/arm.c (arm_trampoline_init): Likewise.
	* config/c6x/c6x.c (c6x_initialize_trampoline): Likewise.
	* config/csky/csky.c (csky_trampoline_init): Likewise.
	* config/m68k/linux.h (FInALIZE_TRAMPOLINE): Likewise.
	* config/tilegx/tilegx.c (tilegx_trampoline_init): Likewise.
	* config/tilepro/tilepro.c (tilepro_trampoline_init): Ditto.
	* config/vxworks.c: Include rtl.h, memmodel.h, and optabs.h.
	(vxworks_emit_call_builtin___clear_cache): New.
	* config/vxworks.h (CLEAR_INSN_CACHE): Drop.
	(TARGET_EMIT_CALL_BUILTIN___CLEAR_CACHE): Define.
	* target.def (trampoline_init): In the documentation, refer to
	maybe_emit_call_builtin___clear_cache.
	(emit_call_builtin___clear_cache): New.
	* doc/tm.texi.in: Add new hook point.
	(CLEAR_CACHE_INSN): Remove duplicate 'both'.
	* doc/tm.texi: Rebuilt.
	* targhooks.h (default_meit_call_builtin___clear_cache):
	Declare.
	* tree.h (BUILTIN_ASM_NAME_PTR): New.

2020-12-03  Ilya Leoshkevich  <iii@linux.ibm.com>

	* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path):
	Do not allow __builtin_constant_p on a threading path.

2020-12-02  Jakub Jelinek  <jakub@redhat.com>

	* dwarf2out.c (add_scalar_info): Only use add_AT_wide for 128-bit
	constants and only in dwarf-5 or later, where DW_FORM_data16 is
	available.  Otherwise use DW_FORM_block*/DW_FORM_exprloc with
	DW_OP_implicit_value to describe the constant.

2020-12-02  qing zhao  <qinzhao@gcc.gnu.org>

	PR rtl-optimization/97777
	* reg-stack.c (rest_of_handle_stack_regs): call
	df_insn_rescan_all if reg_to_stack return true.

2020-12-02  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390-protos.h (s390_const_int_pool_entry_p): New
	function.
	* config/s390/s390.c (s390_const_int_pool_entry_p): New
	function.
	* config/s390/s390.md: Add define_peephole2 that produces llihf
	and oilf.

2020-12-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97630
	* tree-vectorizer.h (_slp_tree::next_node,
	_slp_tree::prev_node): New.
	(vect_slp_init): Declare.
	(vect_slp_fini): Likewise.
	* tree-vectorizer.c (vectorize_loops): Call vect_slp_init/fini.
	(pass_slp_vectorize::execute): Likewise.
	* tree-vect-slp.c (vect_slp_init): New.
	(vect_slp_fini): Likewise.
	(slp_first_node): New global.
	(_slp_tree::_slp_tree): Link node into the SLP tree list.
	(_slp_tree::~_slp_tree): Delink node from the SLP tree list.

2020-12-02  Scott Snyder  <sss@li-snyder.org>

	PR plugins/98059
	* vec.h (auto_delete_vec): Use
	DISABLE_COPY_AND_ASSIGN(auto_delete_vec) instead of
	DISABLE_COPY_AND_ASSIGN(auto_delete_vec<T>) to make it valid C++20
	after DR2237.

2020-12-02  Martin Liska  <mliska@suse.cz>

	PR ipa/98075
	* cgraph.c (cgraph_node::dump): Dump decl_is_malloc flag.
	* ipa-pure-const.c (propagate_malloc): Do not set malloc
	attribute for void functions.

2020-12-02  H.J. Lu  <hjl.tools@gmail.com>

	PR middle-end/93195
	PR middle-end/93197
	* configure.ac (HAVE_GAS_SECTION_LINK_ORDER): New.  Define 1 if
	the assembler supports the section flag 'o' for specifying
	section with link-order.
	* output.h (SECTION_LINK_ORDER): New.  Defined to 0x8000000.
	(SECTION_MACH_DEP): Changed from 0x8000000 to 0x10000000.
	* targhooks.c (default_print_patchable_function_entry): Pass
	SECTION_LINK_ORDER to switch_to_section if the section flag 'o'
	works.  Pass current_function_decl to switch_to_section.
	* varasm.c (default_elf_asm_named_section): Use 'o' flag for
	SECTION_LINK_ORDER if assembler supports it.
	* config.in: Regenerated.
	* configure: Likewise.
	* doc/sourcebuild.texi: Document o_flag_in_section.

2020-12-02  H.J. Lu  <hjl.tools@gmail.com>

	* config/i386/i386.opt: Add the missing '.' for -mneeded.

2020-12-02  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_transform_loop_stmt): Return whether
	we vectorized a stmt.
	(vect_transform_loop): Only call maybe_set_vectorized_backedge_value
	when we vectorized the stmt.

2020-12-02  Jakub Jelinek  <jakub@redhat.com>

	* expmed.h (expand_divmod): Only declare if GCC_OPTABS_H is defined.
	Add enum optabs_method argument defaulted to OPTAB_LIB_WIDEN.
	* expmed.c: Include expmed.h after optabs.h.
	(expand_divmod): Add methods argument, if it is not OPTAB_{,LIB_}WIDEN,
	don't choose a wider mode, and pass it to other calls instead of
	hardcoded OPTAB_LIB_WIDEN.  Avoid emitting libcalls if not
	OPTAB_LIB or OPTAB_LIB_WIDEN.
	* optabs.c: Include expmed.h after optabs.h.
	(expand_doubleword_mod, expand_doubleword_divmod): Pass OPTAB_DIRECT
	as last argument to expand_divmod.
	(expand_binop): Punt if {s,u}divmod_optab has handler for double-word
	int_mode.
	* expr.c: Include expmed.h after optabs.h.
	* explow.c: Include expmed.h after optabs.h.

2020-12-02  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97459
	* optabs.h (expand_doubleword_divmod): Declare.
	* optabs.c (expand_doubleword_divmod): New function.
	(expand_binop): Use it.
	* internal-fn.c (expand_DIVMOD): Likewise.

2020-12-02  Martin Liska  <mliska@suse.cz>

	PR c/98087
	* gimple-fold.c (clear_padding_type): Do not divide by zero.

2020-12-02  Martin Liska  <mliska@suse.cz>

	* gdbinit.in: Write what each command calls
	for a debugging function.

2020-12-02  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Use OPTION_MASK_DIRECT_MOVE for Power8 target_enable instead
	of OPTION_MASK_HTM.
	* config/rs6000/rs6000-cpus.def (ISA_2_7_MASKS_SERVER):
	Remove OPTION_MASK_HTM.
	(RS6000_CPU): Add OPTION_MASK_HTM to power8, power9 and
	powerpc64le entries.

2020-12-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/98079
	* config/i386/i386.md (abs<mode>2): Enable QImode
	only for !TARGET_PARTIAL_REG_STALL.
	(*abs<mode>2_1): Ditto.
	(<maxmin:code><mode>3): Ditto.
	(*<maxmin:code><mode>3_1): Ditto.

2020-12-02  Martin Liska  <mliska@suse.cz>

	* diagnostic.c (diagnostic_report_diagnostic): ICE causes to
	terminate compiler immediately, so I guess it should be printed
	always.

2020-12-02  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/88702
	* gimple-if-to-switch.cc (pass_if_to_switch::execute):
	Require at least 2 BBs.
	* gimple-if-to-switch.cc (find_conditions): Require
	equal precision for low and high of a range.

2020-12-02  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/98084
	* gimple-if-to-switch.cc (find_conditions): Consider only
	integral types.

2020-12-02  Jeff Law  <law@redhat.com>

	* config/h8300/addsub.md (addqi3_clobber_flags): Rename to
	addqi3_flags and annotate with a <cczn> for define_subst.
	(addhi3_h8sx_clobber_flags): Likewise.
	(subqi3_clobber_flags, sub<mode>3_clobber_flags): Likewise.
	(neg<mode2>_clobber_flags): Similarly.
	(addsi3_clobber_flags): Similarly.  Update last argument to
	output_plussi to distinguish when we need flags or do not need
	flags.
	(addhi3_clobber_flags): Similarly.  Twiddle code for cases
	+-1, +-2 and +-4.
	* config/h8300/h8300.md: Define iterators, mode attributes and
	substitutions for use in compare/test elimination.
	* config/h8300/jumpcall.md (branch, branch_1): Use H8cc mode
	iterator to cover the different modes for the CC register.
	(branch_1_false): Likewise.

2020-12-02  Maciej W. Rozycki  <macro@linux-mips.org>

	* loop-iv.c: Fix a typo, s/bu/by/, in the `iv_analyze_expr'
	description in the introduction.

2020-12-02  H.J. Lu  <hjl.tools@gmail.com>

	* configure.ac (HAVE_GAS_SHF_GNU_RETAIN): New.  Define 1 if
	the assembler supports marking sections with SHF_GNU_RETAIN flag.
	* output.h (SECTION_RETAIN): New.  Defined as 0x4000000.
	(SECTION_MACH_DEP): Changed from 0x4000000 to 0x8000000.
	(default_unique_section): Add a bool argument.
	* varasm.c (get_section): Set SECTION_RETAIN for the preserved
	symbol with HAVE_GAS_SHF_GNU_RETAIN.
	(resolve_unique_section): Used named section for the preserved
	symbol if assembler supports SHF_GNU_RETAIN.
	(get_variable_section): Handle the preserved common symbol with
	HAVE_GAS_SHF_GNU_RETAIN.
	(default_elf_asm_named_section): Require the full declaration and
	use the 'R' flag for SECTION_RETAIN.
	* config.in: Regenerated.
	* configure: Likewise.
	* doc/sourcebuild.texi: Document R_flag_in_section.

2020-12-02  H.J. Lu  <hjl.tools@gmail.com>

	* config.gcc: Replace cet.o with gnu-property.o.  Replace
	i386/t-cet with i386/t-gnu-property.
	* config/i386/cet.c: Renamed to ...
	* config/i386/gnu-property.c: This.
	(emit_gnu_property): New function.
	(file_end_indicate_exec_stack_and_cet): Renamed to ...
	(file_end_indicate_exec_stack_and_gnu_property): This.  Call
	emit_gnu_property to generate GNU_PROPERTY_X86_FEATURE_1_AND and
	GNU_PROPERTY_X86_ISA_1_NEEDED properties.
	* config/i386/i386.opt (mneeded): New.
	* config/i386/linux-common.h (file_end_indicate_exec_stack_and_cet):
	Renamed to ...
	(file_end_indicate_exec_stack_and_gnu_property): This.
	(TARGET_ASM_FILE_END): Updated.
	* config/i386/t-cet: Renamed to ...
	* config/i386/t-gnu-property: This.
	(cet.o): Renamed to ...
	(gnu-property.o): This.
	* doc/invoke.texi: Document -mneeded.

2020-12-01  Eugene Rozenfeld  <Eugene.Rozenfeld@microsoft.com>

	PR tree-optimization/96708
	* match.pd: New pattern for comparing X with MAX (X, Y)
	or MIN (X, y).

2020-12-01  Jeff Law  <law@redhat.com>

	* config/mcore/t-mcore (MULTILIB_EXCEPTIONS): Define.

2020-12-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97595
	* tree.c (component_ref_size): Fail when DECL_SIZE != TYPE_SIZE.
	* tree.h (DECL_SIZE, TYPE_SIZE): Update comment.

2020-12-01  JeanHeyd Meneide  <phdofthehouse@gmail.com>

	* doc/cpp.texi: Document new macros.

2020-12-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97373
	* builtins.c (compute_objsize): Rename...
	(compute_objsize_r): to this.  Change order and types of arguments.
	Use new argument.  Adjust calls to self.
	(access_ref::get_ref): New member function.
	(pointer_query::pointer_query): New member function.
	(pointer_query::get_ref): Same.
	(pointer_query::put_ref): Same.
	(handle_min_max_size): Change order and types of arguments.
	(maybe_emit_free_warning): Add a test.
	* builtins.h (class pointer_query): New class.
	(compute_objsize): Declare an overload.
	* gimple-ssa-sprintf.c (get_destination_size): Add argument.
	(handle_printf_call): Change argument type.
	* tree-ssa-strlen.c (adjust_last_stmt): Add an argument and use it.
	(maybe_warn_overflow): Same.
	(handle_builtin_strcpy): Same.
	(maybe_diag_stxncpy_trunc): Same.
	(handle_builtin_memcpy): Change argument type.  Adjust calls.
	(handle_builtin_strcat): Same.
	(handle_builtin_memset): Same.
	(handle_store): Same.
	(strlen_check_and_optimize_call): Same.
	(check_and_optimize_stmt): Same.
	(strlen_dom_walker): Add new data members.
	(strlen_dom_walker::before_dom_children): Use new member.
	(printf_strlen_execute): Dump cache performance counters.  Remove
	objsize pass cleanup.
	* tree-ssa-strlen.h (maybe_diag_stxncpy_trunc): Add argument.
	(handle_printf_call): Change argument type.

2020-12-01  Eric Botcazou  <ebotcazou@adacore.com>

	* function.c (gen_call_used_regs_seq): In a function subject to the
	leaf register optimization, skip registers that are not present.
	* config/sparc/sparc.c (TARGET_ZERO_CALL_USED_REGS): Define to...
	(sparc_zero_call_used_regs): ...this.  New function.

2020-12-01  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h: Remove unused 'X' specs in the link spec
	rather than driver self-specs.

2020-12-01  Nathan Sidwell  <nathan@acm.org>

	* params.opt (lazy-modules): New.
	* timevar.def (TV_MODULE_IMPORT, TV_MODULE_EXPORT)
	(TV_MODULE_MAPPER): New.

2020-12-01  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97459
	* optabs.c (expand_doubleword_mod): Punt early for even op1.
	(expand_binop): Don't require lshr_optab double-word handler.

2020-12-01  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97954
	* loop-invariant.c (find_invariant_insn): Punt on JUMP_P insns.

2020-12-01  Iain Sandoe  <iain@sandoe.co.uk>

	* configure.ac (check leb128 support): Check that assemblers both
	accept the LEB128 directives and also give the expected output.
	Add a test for uleb128 with the MSB set for a 64 bit value.
	* configure: Regenerated.

2020-12-01  Iain Sandoe  <iain@sandoe.co.uk>

	* configure: Regnerated.

2020-12-01  Ilya Leoshkevich  <iii@linux.ibm.com>

	* optabs-tree.c (vec_cmp_icode_p): New function.
	(vec_cmp_eq_icode_p): New function.
	(expand_vec_cmp_expr_p): Use vec_cmp_icode_p and
	vec_cmp_eq_icode_p.
	(vcond_icode_p): Use get_rtx_code_1, just to be uniform with
	vec_cmp_icode_p.
	* optabs.c (unsigned_optab_p): New function.
	(insn_predicate_matches_p): New function.
	(can_vec_cmp_compare_p): New function.
	(can_vcond_compare_p): Use unsigned_optab_p and
	insn_predicate_matches_p.
	(get_rtx_code): Use get_rtx_code_1.
	(get_rtx_code_1): Version of get_rtx_code that returns UNKNOWN
	instead of asserting.
	* optabs.h (can_vec_cmp_compare_p): New function.
	(get_rtx_code_1): New function.

2020-12-01  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/14799
	PR ipa/88702
	* Makefile.in: Add gimple-if-to-switch.o.
	* dbgcnt.def (DEBUG_COUNTER): Add new debug counter.
	* passes.def: Include new pass_if_to_switch pass.
	* timevar.def (TV_TREE_IF_TO_SWITCH): New timevar.
	* tree-pass.h (make_pass_if_to_switch): New.
	* tree-ssa-reassoc.c (struct operand_entry): Move to the header.
	(dump_range_entry): Move to header file.
	(debug_range_entry): Likewise.
	(no_side_effect_bb): Make it global.
	* tree-switch-conversion.h (simple_cluster::simple_cluster):
	Add inline for couple of functions in order to prevent error
	about multiple defined symbols.
	* gimple-if-to-switch.cc: New file.
	* tree-ssa-reassoc.h: New file.

2020-12-01  Marius Hillenbrand  <mhillen@linux.ibm.com>

	* configure.ac: Add configure option
	--enable-s390-excess-float-precision and check to derive default
	from glibc.
	* config/s390/s390.c: Guard s390_excess_precision with an ifdef
	for ENABLE_S390_EXCESS_FLOAT_PRECISION.
	* doc/install.texi: Document --enable-s390-excess-float-precision.
	* configure: Regenerate.
	* config.in: Regenerate.

2020-12-01  Martin Liska  <mliska@suse.cz>

	PR ipa/98057
	* symtab.c (symtab_node::set_section_for_node): Drop
	implicit_section if x_section is NULL.

2020-12-01  Jakub Jelinek  <jakub@redhat.com>

	PR target/98063
	* config/i386/i386-expand.c (ix86_expand_call): Handle non-plt
	CM_LARGE_PIC calls.

2020-12-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/98070
	* builtins.c (builtin_fnspec): realloc is ".Cw ".

2020-12-01  Jakub Jelinek  <jakub@redhat.com>

	* dwarf2out.c (gen_compile_unit_die): Treat GNU C++20
	like C++14 for -gdwarf-5.

2020-12-01  Jakub Jelinek  <jakub@redhat.com>

	PR debug/97989
	* gcc.c (cpp_unique_options): Add -dD if %:debug-level-gt(2)
	rather than g3|ggdb3|gstabs3|gxcoff3|gvms3.

2020-12-01  Kito Cheng  <kito.cheng@sifive.com>

	* config.gcc (riscv*-*-*): Drop some commited accidentally code.

2020-11-30  Jeff Law  <law@redhat.com>

	* symtab.c (set_section_for_node): Add function comment.
	(set_section_from_node): Likewise.

2020-11-30  David Malcolm  <dmalcolm@redhat.com>

	* doc/plugins.texi (Plugin callbacks): Add PLUGIN_ANALYZER_INIT.
	* plugin.c (register_callback): Likewise.
	(invoke_plugin_callbacks_full): Likewise.
	* plugin.def (PLUGIN_ANALYZER_INIT): New event.

2020-11-30  Jeff Law  <law@redhat.com>

	* config/h8300/bitfield.md: Remove "cc" attribute on any
	insns where it remained.
	* config/h8300/combiner.md: Likewise.
	* config/h8300/jumpcall.md: Likewise.
	* config/h8300/logical.md: Likewise.
	* config/h8300/testcompare.md: Likewise.
	* config/h8300/h8300.md (old_cc attr): Renamed from cc attr.
	* config/h8300/h8300.c (notice_update_cc): Remove.
	(compute_plussi_cc): Change references to CC_* to OLD_CC_.
	(compute_logical_op_cc): Likewise.
	(shift_one, shift_two): Likewise.
	(compute_a_shift_cc): Likewise.
	(get_shift_alg): Likewise.
	(struct shift_insn): Change type of cc_valid field.
	(struct shift_info): Likewise.
	* config/h8300/save.md: Remove accidentially created file.

2020-11-30  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/98037
	* dse.c (find_shift_sequence): Iterate over all integers and
	skip modes that are too small.

2020-11-30  Eugene Rozenfeld  <Eugene.Rozenfeld@microsoft.com>

	PR tree-optimization/96679
	* match.pd (((b | c) & a) | b -> (a & c) | b): New pattern.

2020-11-30  Martin Liska  <mliska@suse.cz>

	* passes.c (emergency_dump_function): Dump symtab when
	we are in an IPA pass.

2020-11-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98064
	* tree-vect-loop.c (vectorizable_live_operation): Avoid
	breaking LC SSA for BB vectorization.

2020-11-30  Jonathan Wakely  <jwakely@redhat.com>

	* doc/sourcebuild.texi (Directives): Fix description of
	dg-require-effective-target to include "target" in selector.

2020-11-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98048
	* tree-vect-generic.c (expand_vector_operations_1): Use the
	correct type for the scalar LHS replacement.

2020-11-30  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/98066
	* gimple-isel.cc (gimple_expand_vec_exprs): Return when
	gimple_expand_vec_exprs replaces last stmt.

2020-11-30  Ilya Leoshkevich  <iii@linux.ibm.com>

	* cfgrtl.c (rtl_bb_info_initialized_p): New function.
	(rtl_dump_bb): Use rtl_bb_info_initialized_p before accessing bb
	insns.

2020-11-30  Iain Buclaw  <ibuclaw@gdcproject.org>

	PR d/87818
	* config.gcc (*-*-freebsd*): Add freebsd-d.o and t-freebsd.
	* config/freebsd-d.c: New file.
	* config/t-freebsd: New file.

2020-11-30  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97459
	* internal-fn.h (expand_addsub_overflow): Declare.
	* internal-fn.c (expand_addsub_overflow): No longer static.
	* optabs.c (expand_doubleword_mod): New function.
	(expand_binop): Optimize double-word mod with constant divisor.

2020-11-30  Kito Cheng  <kito.cheng@sifive.com>

	* config.gcc (riscv*-*-*): Add TARGET_RISCV_DEFAULT_ABI and
	TARGET_RISCV_DEFAULT_ARCH to tm_defines.
	Remove including riscv/withmultilib.h for --with-multilib-list.
	* config/riscv/riscv.h (STRINGIZING): New.
	(__STRINGIZING): Ditto.
	(MULTILIB_DEFAULTS): Ditto.
	* config/riscv/withmultilib.h: Remove.

2020-11-30  Kito Cheng  <kito.cheng@sifive.com>

	* gcc.c (print_multilib_info): Check default arguments not
	appeared in multi-lib option list with '!'

2020-11-30  Jeff Law  <law@redhat.com>

	* config/ft32/ft32.md (umulsidi3): Do not allow constants as
	arguments.

2020-11-29  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (ipa_merge_modref_summary_after_inlining): Fix
	handling of ignore_stores.

2020-11-29  Jan Hubicka  <jh@suse.cz>

	PR jit/97867
	* symtab-thunks.h (thunk_info::release): Use ggc_delete.

2020-11-29  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92936
	PR middle-end/92940
	PR middle-end/89428
	* builtins.c (access_ref::access_ref): Initialize member.
	(access_ref::phi): New function.
	(access_ref::get_ref): New function.
	(access_ref::add_offset): Remove duplicate assignment.
	(maybe_warn_for_bound): Add "maybe" kind of warning messages.
	(warn_for_access): Same.
	(inform_access): Rename...
	(access_ref::inform_access): ...to this.  Print PHI arguments.  Format
	offset the same as size and simplify.  Improve printing of allocation
	functions and VLAs.
	(check_access): Adjust to the above.
	(gimple_parm_array_size): Change argument.
	(handle_min_max_size): New function.
	* builtins.h (class ssa_name_limit_t): Move class here from
	tree-ssa-strlen.c.
	(struct access_ref): Declare new members.
	(gimple_parm_array_size): Change argument.
	* tree-ssa-strlen.c (maybe_warn_overflow): Use access_ref and simplify.
	(handle_builtin_memcpy): Correct argument passed to maybe_warn_overflow.
	(handle_builtin_memset): Same.
	(class ssa_name_limit_t): Move class to builtins.{h,c}.

2020-11-29  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config.gcc (*-*-darwin*): Set d_target_objs and target_has_targetdm.
	* config/elfos.h (TARGET_D_MINFO_SECTION): New macro.
	(TARGET_D_MINFO_START_NAME): New macro.
	(TARGET_D_MINFO_END_NAME): New macro.
	* config/t-darwin: Add darwin-d.o.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (D language and ABI): Add @hook for
	TARGET_D_MINFO_SECTION, TARGET_D_MINFO_START_NAME, and
	TARGET_D_MINFO_END_NAME.
	* config/darwin-d.c: New file.

2020-11-29  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-structalias.c (handle_pure_call): Skip EAF_UNUSED
	 parameters.

2020-11-29  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_lattice::merge): Do nothing if F is EAF_UNUSED.
	(analyze_parms): Detect unused params.
	(modref_merge_call_site_flags): Merge correct EAF_UNUSED.

2020-11-28  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/97939
	* config/sparc/predicates.md (arith_double_add_operand): Comment.
	* config/sparc/sparc.md (uaddvdi4): Use arith_double_operand.
	(addvdi4): Use arith_double_add_operand.
	(addsi3): Remove useless attributes.
	(addvsi4): Use arith_add_operand.
	(*cmp_ccv_plus): Likewise and add second alternative accordingly.
	(*cmp_ccxv_plus): Likewise.
	(*cmp_ccv_plus_set): Likewise.
	(*cmp_ccxv_plus_set): Likewise.
	(*cmp_ccv_plus_sltu_set): Likewise.
	(usubvdi4): Use arith_double_operand.
	(subvdi4): Use arith_double_add_operand.
	(subsi3): Remove useless attributes.
	(subvsi4): Use arith_add_operand.
	(*cmp_ccv_minus): Likewise and add second alternative accordingly.
	(*cmp_ccxv_minus): Likewise.
	(*cmp_ccv_minus_set): Likewise.
	(*cmp_ccxv_minus_set): Likewise.
	(*cmp_ccv_minus_sltu_set): Likewise.
	(negsi2): Use register_operand.
	(unegvsi3): Likewise.
	(negvsi3) Likewise.
	(*cmp_ccnz_neg): Likewise.
	(*cmp_ccxnz_neg): Likewise.
	(*cmp_ccnz_neg_set): Likewise.
	(*cmp_ccxnz_neg_set): Likewise.
	(*cmp_ccc_neg_set): Likewise.
	(*cmp_ccxc_neg_set): Likewise.
	(*cmp_ccc_neg_sltu_set): Likewise.
	(*cmp_ccv_neg): Likewise.
	(*cmp_ccxv_neg): Likewise.
	(*cmp_ccv_neg_set): Likewise.
	(*cmp_ccxv_neg_set): Likewise.
	(*cmp_ccv_neg_sltu_set): Likewise.

2020-11-27  H.J. Lu  <hjl.tools@gmail.com>

	PR other/98027
	* doc/install.texi: Default to --enable-cet=auto.

2020-11-27  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-oacc-kernels-decompose.cc (flatten_binds): Don't choke on
	empty GIMPLE sequence, and examine all statements contained in
	inner 'GIMPLE_BIND'.

2020-11-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/98024
	* tree-ssa-pre.c (insert): Fix successor RPO order check.
	(do_pre_regular_insertion): When inserting an assignment
	in place of an all-same-value PHI still record that into
	PHI_GEN.

2020-11-27  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssanames.c (get_range_info): Handle INTEGER_CST by returning
	VR_RANGE with both *min and *max set to the wide_int value of the
	INTEGER_CST.  Return VR_VARYING for non-SSA_NAMEs.
	* match.pd ((t * 2) / 2) -> t): Handle also @0 being INTEGER_CST.
	Simplify by calling get_range_info on everything.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Simplify by calling
	get_range_info on everything.
	* tree-scalar-evolution.c (iv_can_overflow_p): Likewise.

2020-11-27  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/88101
	* gimple-fold.c (clear_padding_type): Ignore fields with is_empty_type
	types.

2020-11-27  Tobias Burnus  <tobias@codesourcery.com>

	PR c/97880
	* omp-expand.c (expand_oacc_collapse_init, expand_oacc_collapse_vars):
	Use now passed diff_type.
	(expand_oacc_for): Take largest type for diff_type, taking tiling
	and collapsing into account.

2020-11-27  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.opt
	(-param=aarch64-autovec-preference): Define.
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Set aarch64_sve_compare_costs to 0 when preferring only Advanced
	SIMD.
	(aarch64_cmp_autovec_modes): Define.
	(aarch64_preferred_simd_mode): Adjust to use the above.
	(aarch64_autovectorize_vector_modes): Likewise.
	* doc/invoke.texi: Document aarch64-autovec-preference param.

2020-11-27  Xionghu Luo  <luoxhu@linux.ibm.com>

	* config/rs6000/rs6000-call.c (altivec_expand_vec_set_builtin):
	Change call param 2 from type int to rtx.
	* config/rs6000/rs6000-protos.h (rs6000_expand_vector_set):
	Likewise.
	* config/rs6000/rs6000.c (rs6000_expand_vector_init):
	Change call param 2 from type int to rtx.
	(rs6000_expand_vector_set): Likewise.
	* config/rs6000/vector.md (vec_set<mode>): Support both constant
	and variable index vec_set.

2020-11-27  Haochen Gui  <guihaoc@gcc.gnu.org>

	* config/rs6000/rs6000-protos.h (rs6000_output_addr_vec_elt): Declare.
	* config/rs6000/rs6000.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC):
	Define.
	(rs6000_gen_pic_addr_diff_vec, rs6000_output_addr_vec_elt): Implement.
	* config/rs6000/rs6000.h (CASE_VECTOR_PC_RELATIVE,
	CASE_VECTOR_MODE, ASM_OUTPUT_ADDR_VEC_ELT): Define.
	* config/rs6000/rs6000.md (tablejump<mode>_absolute,
	tablejump<mode>_absolute_nospec): New expanders.
	* config/rs6000/rs6000.opt (mrelative-jumptables): New.

2020-11-26  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/96607
	* config/sparc/sparc-protos.h (eligible_for_call_delay): Delete.
	* config/sparc/sparc.c (eligible_for_call_delay): Likewise.
	* config/sparc/sparc.md (in_call_delay): Likewise.
	(tls_delay_slot): New attribute.
	(define_delay [call]): Use in_branch_delay.
	(tgd_call<P:mode>): Set type to call_no_delay_slot when
	tls_delay_slot is false.
	(tldm_call<P:mode>): Likewise.

2020-11-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97997
	* match.pd ((t * 2) / 2) -> t): Optimize even for defined
	overflow if ranges prove there is no overflow.

2020-11-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97953
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_incoming_edge): Make
	sure the condition post-dominates the SSA definition before
	recording into SSA_NAME_RANGE_INFO.

2020-11-26  Richard Biener  <rguenther@suse.de>

	* gimple-isel.cc (gimple_expand_vec_cond_expr): Only
	lower VECTOR_BOOLEAN_TYPE_P VEC_COND_EXPRs.

2020-11-26  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/mkoffload.c (copy_early_debug_info): Don't wipe
	relocation symbols.

2020-11-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_multi_arg_builtin):
	Remove args array of structs, declare rtx xops array instead.
	Update all uses.
	(ix86_expand_args_builtin): Ditto.
	(ix86_expand_round_builtin): Ditto.
	(ix86_expand_special_args_builtin): Ditto.

2020-11-26  Martin Liska  <mliska@suse.cz>

	* dwarf2out.c (gen_compile_unit_die): Fix missing == 0 in a
	strcmp.

2020-11-26  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sol2.h (TIME_LIBRARY): Remove.

2020-11-26  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Set param_vect_partial_vector_usage as 1 for Power10 and up
	by default.

2020-11-26  Jakub Jelinek  <jakub@redhat.com>

	* gimple-fold.c (clear_padding_union): Ignore DECL_PADDING_P
	fields.
	(clear_padding_type): Ignore DECL_PADDING_P fields, rather than
	DECL_BIT_FIELD with NULL DECL_NAME.

2020-11-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97979
	* match.pd ((X {&,^,|} C2) << C1 into (X << C1) {&,^,|} (C2 << C1)):
	Only optimize if int_const_binop returned non-NULL.

2020-11-26  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386-expand.c
	(ix86_expand_special_args_builtin): Delete last_arg_constant
	and match.

2020-11-26  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/97873
	* config/i386/i386.md (abs<mode>2): Use SDWIM mode iterator.
	(*abs<mode>2_1): Use SWI mode iterator.
	(<maxmin:code><mode>3): Use SDWIM mode iterator.
	(*<maxmin:code><mode>3_1): Use SWI mode iterator.

2020-11-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/96906
	* config/i386/sse.md (VI12_AVX2): Remove V64QI/V32HI modes.
	(VI12_AVX2_AVX512BW): New mode iterator.
	(<sse2_avx2>_<plusminus_insn><mode>3<mask_name>,
	uavg<mode>3_ceil, <sse2_avx2>_uavg<mode>3<mask_name>): Use
	VI12_AVX2_AVX512BW iterator instead of VI12_AVX2.
	(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Likewise.
	(*<sse2_avx2>_uavg<mode>3<mask_name>): Likewise.
	(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Add a new
	define_split after this insn.

2020-11-26  Martin Uecker  <muecker@gwdg.de>

	PR c/65455
	PR c/92935
	* ginclude/stdatomic.h: Use comma operator to drop qualifiers.

2020-11-26  Vladimir Makarov  <vmakarov@redhat.com>

	PR bootstrap/97983
	* lra.c (lra_process_new_insns): Use emit_insn_before_noloc or
	emit_insn_after_noloc with the destination BB.

2020-11-25  Martin Sebor  <msebor@redhat.com>

	PR bootstrap/97622
	PR bootstrap/94982
	* config/i386/i386-options.c (ix86_valid_target_attribute_inner_p):
	Avoid -Wformat-diag.
	* digraph.cc (struct test_edge): Same.
	* dumpfile.c (dump_loc): Same.
	(dump_context::begin_scope): Same.
	* edit-context.c (edited_file::print_diff): Same.
	(edited_file::print_diff_hunk): Same.
	* json.cc (object::print): Same.
	* lto-wrapper.c (merge_and_complain): Same.
	* reload.c (find_reloads): Same.
	* tree-diagnostic-path.cc (print_path_summary_as_text): Same.
	* ubsan.c (ubsan_type_descriptor): Same.

2020-11-25  Jan Hubicka  <jh@suse.cz>

	* gimple.c (gimple_call_arg_flags): Also imply EAF_NODIRECTESCAPE.
	* tree-core.h (EAF_NODRECTESCAPE): New flag.
	* tree-ssa-structalias.c (make_indirect_escape_constraint): New
	function.
	(handle_rhs_call): Hanlde EAF_NODIRECTESCAPE.
	* ipa-modref.c (dump_eaf_flags): Print EAF_NODIRECTESCAPE.
	(deref_flags): Dereference is always EAF_NODIRECTESCAPE.
	(modref_lattice::init): Also set EAF_NODIRECTESCAPE.
	(analyze_ssa_name_flags): Pure functions do not affect
	EAF_NODIRECTESCAPE.
	(analyze_params): Likewise.
	(ipa_merge_modref_summary_after_inlining): Likewise.
	(modref_merge_call_site_flags): Likewise.

2020-11-25  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_summaries::duplicate,
	modref_summaries_lto::duplicate): Copy arg_flags.
	(remap_arg_flags): Fix remapping of arg_flags.

2020-11-25  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97956
	* gimple-fold.c (gimple_fold_builtin_memchr): Use sizetype for pointer
	offsets.

2020-11-25  Matthew Malcomson  <matthew.malcomson@arm.com>

	* asan.c (asan_instrument_reads): New.
	(asan_instrument_writes): New.
	(asan_memintrin): New.
	(handle_builtin_stack_restore): Account for HWASAN.
	(handle_builtin_alloca): Account for HWASAN.
	(get_mem_refs_of_builtin_call): Special case strlen for HWASAN.
	(hwasan_instrument_reads): New.
	(hwasan_instrument_writes): New.
	(hwasan_memintrin): New.
	(report_error_func): Assert not HWASAN.
	(build_check_stmt): Make HWASAN_CHECK instead of ASAN_CHECK.
	(instrument_derefs): HWASAN does not tag globals.
	(instrument_builtin_call): Use new helper functions.
	(maybe_instrument_call): Don't instrument `noreturn` functions.
	(initialize_sanitizer_builtins): Add new type.
	(asan_expand_mark_ifn): Account for HWASAN.
	(asan_expand_check_ifn): Assert never called by HWASAN.
	(asan_expand_poison_ifn): Account for HWASAN.
	(asan_instrument): Branch based on whether using HWASAN or ASAN.
	(pass_asan::gate): Return true if sanitizing HWASAN.
	(pass_asan_O0::gate): Return true if sanitizing HWASAN.
	(hwasan_check_func): New.
	(hwasan_expand_check_ifn): New.
	(hwasan_expand_mark_ifn): New.
	(gate_hwasan): New.
	* asan.h (hwasan_expand_check_ifn): New decl.
	(hwasan_expand_mark_ifn): New decl.
	(gate_hwasan): New decl.
	(asan_intercepted_p): Always false for hwasan.
	(asan_sanitize_use_after_scope): Account for HWASAN.
	* builtin-types.def (BT_FN_PTR_CONST_PTR_UINT8): New.
	* gimple-fold.c (gimple_build): New overload for building function
	calls without arguments.
	(gimple_build_round_up): New.
	* gimple-fold.h (gimple_build): New decl.
	(gimple_build): New inline function.
	(gimple_build_round_up): New decl.
	(gimple_build_round_up): New inline function.
	* gimple-pretty-print.c (dump_gimple_call_args): Account for
	HWASAN.
	* gimplify.c (asan_poison_variable): Account for HWASAN.
	(gimplify_function_tree): Remove requirement of
	SANITIZE_ADDRESS, requiring asan or hwasan is accounted for in
	`asan_sanitize_use_after_scope`.
	* internal-fn.c (expand_HWASAN_CHECK): New.
	(expand_HWASAN_ALLOCA_UNPOISON): New.
	(expand_HWASAN_CHOOSE_TAG): New.
	(expand_HWASAN_MARK): New.
	(expand_HWASAN_SET_TAG): New.
	* internal-fn.def (HWASAN_ALLOCA_UNPOISON): New.
	(HWASAN_CHOOSE_TAG): New.
	(HWASAN_CHECK): New.
	(HWASAN_MARK): New.
	(HWASAN_SET_TAG): New.
	* sanitizer.def (BUILT_IN_HWASAN_LOAD1): New.
	(BUILT_IN_HWASAN_LOAD2): New.
	(BUILT_IN_HWASAN_LOAD4): New.
	(BUILT_IN_HWASAN_LOAD8): New.
	(BUILT_IN_HWASAN_LOAD16): New.
	(BUILT_IN_HWASAN_LOADN): New.
	(BUILT_IN_HWASAN_STORE1): New.
	(BUILT_IN_HWASAN_STORE2): New.
	(BUILT_IN_HWASAN_STORE4): New.
	(BUILT_IN_HWASAN_STORE8): New.
	(BUILT_IN_HWASAN_STORE16): New.
	(BUILT_IN_HWASAN_STOREN): New.
	(BUILT_IN_HWASAN_LOAD1_NOABORT): New.
	(BUILT_IN_HWASAN_LOAD2_NOABORT): New.
	(BUILT_IN_HWASAN_LOAD4_NOABORT): New.
	(BUILT_IN_HWASAN_LOAD8_NOABORT): New.
	(BUILT_IN_HWASAN_LOAD16_NOABORT): New.
	(BUILT_IN_HWASAN_LOADN_NOABORT): New.
	(BUILT_IN_HWASAN_STORE1_NOABORT): New.
	(BUILT_IN_HWASAN_STORE2_NOABORT): New.
	(BUILT_IN_HWASAN_STORE4_NOABORT): New.
	(BUILT_IN_HWASAN_STORE8_NOABORT): New.
	(BUILT_IN_HWASAN_STORE16_NOABORT): New.
	(BUILT_IN_HWASAN_STOREN_NOABORT): New.
	(BUILT_IN_HWASAN_TAG_MISMATCH4): New.
	(BUILT_IN_HWASAN_HANDLE_LONGJMP): New.
	(BUILT_IN_HWASAN_TAG_PTR): New.
	* sanopt.c (sanopt_optimize_walker): Act for hwasan.
	(pass_sanopt::execute): Act for hwasan.
	* toplev.c (compile_file): Use `gate_hwasan` function.

2020-11-25  Matthew Malcomson  <matthew.malcomson@arm.com>

	* asan.c (struct hwasan_stack_var): New.
	(hwasan_sanitize_p): New.
	(hwasan_sanitize_stack_p): New.
	(hwasan_sanitize_allocas_p): New.
	(initialize_sanitizer_builtins): Define new builtins.
	(ATTR_NOTHROW_LIST): New macro.
	(hwasan_current_frame_tag): New.
	(hwasan_frame_base): New.
	(stack_vars_base_reg_p): New.
	(hwasan_maybe_init_frame_base_init): New.
	(hwasan_record_stack_var): New.
	(hwasan_get_frame_extent): New.
	(hwasan_increment_frame_tag): New.
	(hwasan_record_frame_init): New.
	(hwasan_emit_prologue): New.
	(hwasan_emit_untag_frame): New.
	(hwasan_finish_file): New.
	(hwasan_truncate_to_tag_size): New.
	* asan.h (hwasan_record_frame_init): New declaration.
	(hwasan_record_stack_var): New declaration.
	(hwasan_emit_prologue): New declaration.
	(hwasan_emit_untag_frame): New declaration.
	(hwasan_get_frame_extent): New declaration.
	(hwasan_maybe_enit_frame_base_init): New declaration.
	(hwasan_frame_base): New declaration.
	(stack_vars_base_reg_p): New declaration.
	(hwasan_current_frame_tag): New declaration.
	(hwasan_increment_frame_tag): New declaration.
	(hwasan_truncate_to_tag_size): New declaration.
	(hwasan_finish_file): New declaration.
	(hwasan_sanitize_p): New declaration.
	(hwasan_sanitize_stack_p): New declaration.
	(hwasan_sanitize_allocas_p): New declaration.
	(HWASAN_TAG_SIZE): New macro.
	(HWASAN_TAG_GRANULE_SIZE): New macro.
	(HWASAN_STACK_BACKGROUND): New macro.
	* builtin-types.def (BT_FN_VOID_PTR_UINT8_PTRMODE): New.
	* builtins.def (DEF_SANITIZER_BUILTIN): Enable for HWASAN.
	* cfgexpand.c (align_local_variable): When using hwasan ensure
	alignment to tag granule.
	(align_frame_offset): New.
	(expand_one_stack_var_at): For hwasan use tag offset.
	(expand_stack_vars): Record stack objects for hwasan.
	(expand_one_stack_var_1): Record stack objects for hwasan.
	(init_vars_expansion): Initialise hwasan state.
	(expand_used_vars): Emit hwasan prologue and generate hwasan epilogue.
	(pass_expand::execute): Emit hwasan base initialization if needed.
	* doc/tm.texi (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
	TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
	TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
	TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
	* doc/tm.texi.in (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
	TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
	TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
	TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
	* explow.c (get_dynamic_stack_base): Take new `base` argument.
	* explow.h (get_dynamic_stack_base): Take new `base` argument.
	* sanitizer.def (BUILT_IN_HWASAN_INIT): New.
	(BUILT_IN_HWASAN_TAG_MEM): New.
	* target.def (target_memtag_tag_size,target_memtag_granule_size,
	target_memtag_insert_random_tag,target_memtag_add_tag,
	target_memtag_set_tag,target_memtag_extract_tag,
	target_memtag_untagged_pointer): New hooks.
	* targhooks.c (HWASAN_SHIFT): New.
	(HWASAN_SHIFT_RTX): New.
	(default_memtag_tag_size): New default hook.
	(default_memtag_granule_size): New default hook.
	(default_memtag_insert_random_tag): New default hook.
	(default_memtag_add_tag): New default hook.
	(default_memtag_set_tag): New default hook.
	(default_memtag_extract_tag): New default hook.
	(default_memtag_untagged_pointer): New default hook.
	* targhooks.h (default_memtag_tag_size): New default hook.
	(default_memtag_granule_size): New default hook.
	(default_memtag_insert_random_tag): New default hook.
	(default_memtag_add_tag): New default hook.
	(default_memtag_set_tag): New default hook.
	(default_memtag_extract_tag): New default hook.
	(default_memtag_untagged_pointer): New default hook.
	* toplev.c (compile_file): Call hwasan_finish_file when finished.

2020-11-25  Matthew Malcomson  <matthew.malcomson@arm.com>

	* common.opt (flag_sanitize_recover): Default for kernel
	hwaddress.
	(static-libhwasan): New cli option.
	* config/aarch64/aarch64.c (aarch64_can_tag_addresses): New.
	(TARGET_MEMTAG_CAN_TAG_ADDRESSES): New.
	* config/gnu-user.h (LIBHWASAN_EARLY_SPEC): hwasan equivalent of
	asan command line flags.
	* cppbuiltin.c (define_builtin_macros_for_compilation_flags):
	Add hwasan equivalent of __SANITIZE_ADDRESS__.
	* doc/invoke.texi: Document hwasan command line flags.
	* doc/tm.texi: Document new hook.
	* doc/tm.texi.in: Document new hook.
	* flag-types.h (enum sanitize_code): New sanitizer values.
	* gcc.c (STATIC_LIBHWASAN_LIBS): New macro.
	(LIBHWASAN_SPEC): New macro.
	(LIBHWASAN_EARLY_SPEC): New macro.
	(SANITIZER_EARLY_SPEC): Update to include hwasan.
	(SANITIZER_SPEC): Update to include hwasan.
	(sanitize_spec_function): Use hwasan options.
	* opts.c (finish_options): Describe conflicts between address
	sanitizers.
	(find_sanitizer_argument): New.
	(report_conflicting_sanitizer_options): New.
	(sanitizer_opts): Introduce new sanitizer flags.
	(common_handle_option): Add defaults for kernel sanitizer.
	* params.opt (hwasan--instrument-stack): New
	(hwasan-random-frame-tag): New
	(hwasan-instrument-allocas): New
	(hwasan-instrument-reads): New
	(hwasan-instrument-writes): New
	(hwasan-instrument-mem-intrinsics): New
	* target.def (HOOK_PREFIX): Add new hook.
	(can_tag_addresses): Add new hook under memtag prefix.
	* targhooks.c (default_memtag_can_tag_addresses): New.
	* targhooks.h (default_memtag_can_tag_addresses): New decl.
	* toplev.c (process_options): Ensure hwasan only on
	architectures that advertise the possibility.

2020-11-25  Matthew Malcomson  <matthew.malcomson@arm.com>

	* doc/install.texi: Document new option.

2020-11-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_maybe_expand_sve_subreg_move):
	Do not optimize LRA subregs.
	* config/aarch64/aarch64-sve.md
	(@aarch64_pred_<SVE_INT_UNARY:optab><mode>): Tie the input to the
	output.
	(@aarch64_sve_revbhw_<SVE_ALL:mode><PRED_HSD:mode>): Likewise.
	(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
	(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
	(*cnot<mode>): Likewise.
	(@aarch64_pred_<SVE_COND_FP_UNARY:optab><mode>): Likewise.
	(@aarch64_sve_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>):
	Likewise.
	(@aarch64_sve_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
	Likewise.
	(@aarch64_sve_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>):
	Likewise.
	(@aarch64_sve_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>):
	Likewise.
	(@aarch64_sve_<optab>_trunc<SVE_FULL_SDF:mode><SVE_FULL_HSF:mode>):
	Likewise.
	(@aarch64_sve_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>):
	Likewise.
	(@aarch64_sve_<optab>_nontrunc<SVE_FULL_HSF:mode><SVE_FULL_SDF:mode>):
	Likewise.
	* config/aarch64/aarch64-sve2.md
	(@aarch64_pred_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): Likewise.
	(@aarch64_pred_<SVE2_U32_UNARY:sve_int_op><mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): Likewise.

2020-11-25  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/95862
	* internal-fn.c (get_min_precision): For narrowing conversion, recurse
	on the operand and if the operand precision is smaller than the
	current one, return that smaller precision.
	(expand_mul_overflow): For s1 * u2 -> ur and s1 * s2 -> ur cases
	if the sum of minimum precisions of both operands is smaller or equal
	to the result precision, just perform normal multiplication and
	set overflow to the sign bit of the multiplication result.  For
	u1 * u2 -> sr if both arguments have the MSB known zero, use
	normal s1 * s2 -> sr expansion.

2020-11-25  Jan Hubicka  <jh@suse.cz>

	* cfg.c (free_block): New function.
	(clear_edges): Rename to ....
	(free_cfg): ... this one; also free BBs and vectors.
	(expunge_block): Update comment.
	* cfg.h (clear_edges): Rename to ...
	(free_cfg): ... this one.
	* cgraph.c (release_function_body): Use free_cfg.

2020-11-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/97579
	* gimple-isel.cc (gimple_expand_vec_cond_expr): Lower
	VECTOR_BOOLEAN_TYPE_P, non-vector mode VEC_COND_EXPRs.

2020-11-25  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/97943
	* gimple-fold.c (clear_padding_union, clear_padding_type): Error on and
	ignore flexible array member fields.  Ignore fields with
	error_mark_node type.

2020-11-24  Ulrich Weigand  <ulrich.weigand@de.ibm.com>

	Revert:
	2020-11-24  Ulrich Weigand  <uweigand@de.ibm.com>

	* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
	Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
	* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
	and set_unsafe_math_optimizations_flags.
	(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
	setting flags already explicitly set on the command line.  In the !set
	case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
	Never reset x_flag_signaling_nans or x_flag_rounding_math.
	(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
	it to avoid setting flags already explicitly set on the command line.
	(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
	x_flag_associative_math, x_flag_reciprocal_math, and
	x_flag_rounding_math.

2020-11-24  Vladimir Makarov  <vmakarov@redhat.com>

	PR bootstrap/97933
	* lra.c (lra_process_new_insns): Stop on the first real insn after
	head of e->dest.

2020-11-24  Richard Earnshaw  <rearnsha@arm.com>

	PR target/97534
	* config/arm/arm.c (arm_split_atomic_op): Use gen_int_mode when
	negating a const_int.

2020-11-24  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/vector.md: Use vcond_comparison_operator
	predicate.

2020-11-24  Ulrich Weigand  <uweigand@de.ibm.com>

	* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
	Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
	* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
	and set_unsafe_math_optimizations_flags.
	(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
	setting flags already explicitly set on the command line.  In the !set
	case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
	Never reset x_flag_signaling_nans or x_flag_rounding_math.
	(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
	it to avoid setting flags already explicitly set on the command line.
	(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
	x_flag_associative_math, x_flag_reciprocal_math, and
	x_flag_rounding_math.

2020-11-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/97950
	* config/i386/i386.md (*setcc_si_1_and): Macroize into...
	(*setcc_<mode>_1_and): New define_insn_and_split with SWI24 iterator.
	(*setcc_si_1_movzbl): Macroize into...
	(*setcc_<mode>_1_movzbl): New define_insn_and_split with SWI24
	iterator.

2020-11-24  Jakub Jelinek  <jakub@redhat.com>

	* gimple-fold.c (clear_padding_flush): If a word contains only 0
	or 0xff bytes of padding other than all set, all clear, all set
	followed by all clear or all clear followed by all set, don't emit
	a RMW operation on the whole word or parts of it, but instead
	clear the individual bytes of padding.  For paddings of one byte
	size, don't use char[1] and {}, but instead just char and 0.

2020-11-24  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-expand.c (expand_oacc_for): More explicit checking of which
	OMP constructs we're expecting.

2020-11-24  Thomas Schwinge  <thomas@codesourcery.com>

	* doc/install.texi (Prerequisites) <Tcl>: Add comment.

2020-11-24  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96929
	* fold-const.c (wide_int_binop) <case LSHIFT_EXPR, case RSHIFT_EXPR>:
	Return false on negative second argument rather than trying to handle
	it as shift in the other direction.
	* tree-ssa-ccp.c (bit_value_binop) <case LSHIFT_EXPR,
	case RSHIFT_EXPR>: Punt on negative shift count rather than trying
	to handle it as shift in the other direction.
	* match.pd (-1 >> x to -1): Remove tree_expr_nonnegative_p check.

2020-11-24  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/97849
	* tree-if-conv.c (tree_if_conversion): Move ssa_name
	replacement code from ifcvt_local_dce to this function
	before calling do_rpo_vn.

2020-11-24  Martin Sebor  <msebor@redhat.com>

	* tree-cfg.c (dump_function_to_file): Print type attributes
	and return type.

2020-11-23  Martin Jambor  <mjambor@suse.cz>

	* ipa-prop.h (ipa_pass_through_data): Expand comment describing
	operation.
	* ipa-prop.c (analyze_agg_content_value): Detect new special case and
	encode it as ASSERT_EXPR.
	* ipa-cp.c (values_equal_for_ipcp_p): Move before
	ipa_get_jf_arith_result.
	(ipa_get_jf_arith_result): Special case ASSERT_EXPR.

2020-11-23  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.c (h8300_rtx_costs): Handle the various
	comparison rtx codes too.

2020-11-23  Jan Hubicka  <jh@suse.cz>

	* ipa-prop.c (build_agg_jump_func_from_list,
	ipa_read_jump_function): Reserve agg.items precisely.
	* ipa-prop.h (ipa_node_params::~ipa_node_params): Release descriptors
	(ipa_edge_args::~ipa_edge_args): Release agg.items.

2020-11-23  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-in.c (input_cfg): Do not init ssa operands.
	(input_function): Do not init tree_ssa and set in_ssa_p.
	(input_ssa_names): Do it here.
	* tree-ssa.c (init_tree_ssa): Add additional SIZE parameter, default
	to 0
	* tree-ssanames.c (init_ssanames): Do not round size up to 50, allocate
	precisely.
	* tree-ssa.h (init_tree_ssa): Update prototype.

2020-11-23  Nathan Sidwell  <nathan@acm.org>

	* diagnostic.c (diagnostic_report_current_module): Adjust for C++
	module importation.

2020-11-23  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_section_attr): Don't warn for "lower"
	attribute used with "noinit" or "persistent" attributes.
	(msp430_persist_attr): Remove.
	(attr_lower_exclusions): Remove ATTR_PERSIST exclusion.
	(attr_upper_exclusions): Likewise.
	(attr_either_exclusions): Likewise.
	(attr_persist_exclusions): Remove.
	(msp430_attribute_table): Remove ATTR_PERSIST handling.
	(msp430_handle_generic_attribute): Remove ATTR_PERSIST section conflict
	handling.
	(TARGET_ASM_INIT_SECTIONS): Remove.
	(msp430_init_sections): Remove.
	(msp430_select_section): Use default_elf_select_section for decls with
	the "persistent" attribute.
	(msp430_section_type_flags): Remove ".persistent" section handling.
	* doc/extend.texi (MSP430 Variable Attributes): Remove "noinit" and
	"persistent" documentation.

2020-11-23  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (maybe_push_to_hybrid_worklist): Skip
	debug stmts.

2020-11-23  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/extend.texi (Common Variable Attributes): Document the
	"persistent" variable attribute.
	* doc/sourcebuild.texi (Effective-Target Keywords): Document
	the "persistent" effective target keyword.
	* tree.h (DECL_PERSISTENT_P): Define.
	* varasm.c (bss_initializer_p): Return false for a
	DECL_PERSISTENT_P decl initialized to zero.
	(default_section_type_flags): Handle the ".persistent" section.
	(default_elf_select_section): Likewise.
	(default_unique_section): Likewise.

2020-11-23  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* tree.h (DECL_NOINIT_P): Define.
	* varasm.c (DECL_NOINIT_P): Check DECL_NOINIT_P before using
	unnamed bss/lcomm sections for bss_initializer variables.
	(default_elf_select_section): Use DECL_NOINIT_P instead of
	looking up attribute for .noinit section selection.
	(default_unique_section): Check DECL_NOINIT_P for .noinit
	section selection.

2020-11-23  Matthew Malcomson  <matthew.malcomson@arm.com>

	* doc/install.texi: Document bootstrap-asan option.

2020-11-22  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/97873
	* config/i386/i386.md (abs<mode>2): Use SWI48DWI mode iterator.
	(*abs<dwi>2_doubleword): Use DWIH mode iterator.
	(<maxmin:code><mode>3): Use SWI48DWI mode iterator.
	(*<maxmin:code><dwi>3_doubleword): Use DWIH mode iterator.

2020-11-22  Austin Law  <austinklaw@gmail.com>

	* config/h8300/addsub.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	(add<mod>3_incdec): Remove pattern
	(adds/subs splitter): Only run before reload.
	* config/h8300/bitfield.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output
	of the splitters.
	(cstoreqi4, cstorehi4, cstoresi4): Comment out
	(*bstzhireg, *cmpstz, *bstz, *bistz, *cmpcondset): Likewise
	(*condbset, *cmpcondbclr, *condbclr): Likewise.
	(*cmpcondbsetreg, *condbsetreg, *cmpcondbclrreg): Likewise.
	(*condbclrreg): Likewise.
	* config/h8300/combiner.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.  Add appropriate CC register clobbers to
	existing splitters.
	(*addsi3_and_r_1): Disable for now.
	(*addsi3_and_not_r_1, bit-test branches): Likewise.
	* config/h8300/divmod.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/extensions.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/genmova.sh: Drop "cc" attribute from patterns.
	* config/h8300/mova.md: Drop "cc" attribute from patterns.
	* config/h8300/h8300-modes.def: Add CCZN and CCZNV modes.
	* config/h8300/h8300-protos.h (output_plussi): Update prototype.
	(compute_plussi_length): Likewise.
	(h8300_select_cc_mode): Add prototype.
	(compute_a_shift_cc): Remove prototype
	(cmpute_logical_op_cc): Likewise.
	* config/h8300/h8300.c (names_big): Add "cc" register.
	(names_extended, names_upper_extended): Likewise.
	(h8300_emit_stack_adjustment): Be more selective about setting
	RTX_FRAME_RELATED_P.
	(h8300_print_operand): Handle CCZN mode
	(h8300_select_cc_mode): New function.
	(notice_update_cc): if-0 out.  Only kept for reference purposes.
	(h8300_expand_store): Likewise.
	(h8300_binary_length): Handle new insn forms.
	(output_plussi): Add argument for NEED_FLAGS and handle that case.
	(compute_plussi_length): Likewise.
	(compute_logical_op_cc): Return integer.
	(TARGET_FLAGS_REGNUM): Define.
	* config/h8300/h8300.h (FIRST_PSEUDO_REGISTER): Bump for cc register.
	(FIXED_REGISTERS, CALL_USED_REGISTERS): Handle cc register.
	(REG_ALLOC_ORDER, REGISTER_NAMES): Likewise.
	(SELECT_CC_MODE): Define.
	* config/h8300/h8300.md: Add CC_REG.
	Do not include peepholes.md for now.
	* config/h8300/jumpcall.md (cbranchqi4): Consolidate into
	cbranch<mode>4.
	(cbranchhi4, cbranchsi4): Likewise.
	(cbranch<mode>4): New expander.
	(branch): New define_insn_and_split for use before reload.
	(branch_1, branch_1_false): New patterns to match splitter output.
	Remove code to manage cc_status.flags.
	* config/h8300/logical.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.  Move various peepholes into this file.
	* config/h8300/movepush.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/multiply.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/other.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/peepholes.md: Remove peepholes that were moved
	elsewhere.
	* config/h8300/predicates.md (simple_memory_operand): New.
	* config/h8300/proepi.md: Drop "cc" attribute setting.
	* config/h8300/shiftrotate.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.
	* config/h8300/testcompare.md: Turn existing patterns into
	define_insn_and_split style patterns where the splitter
	adds a clobber of the condition code register.  Drop "cc"
	attribute.  Add _clobber_flags patterns to match output of
	the splitters.  Disable various patterns for now.
	Move some peepholes that were previously in peepholes.md here.
	* config/h8300/save.md: New file.

2020-11-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/95853
	* tree-ssa-math-opts.c (uaddsub_overflow_check_p): Add maxval
	argument, if non-NULL, instead look for r > maxval or r <= maxval
	comparisons.
	(match_uaddsub_overflow): Pattern recognize even other forms of
	__builtin_add_overflow, in particular when addition is performed
	in a wider type and result compared to maximum of the narrower
	type.

2020-11-22  Jeff Law  <law@redhat.com>

	* config/h8300/jumpcall.md (branch_true, branch_false): Revert
	recent change.  Ensure operand[0] is always the target label.

2020-11-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c (struct f_align_stack): Rename
	to type from align_stack to f_align_stack.
	(push_field_alignment): Likewise.
	(pop_field_alignment): Likewise.

2020-11-21  Marek Polacek  <polacek@redhat.com>

	PR c++/94695
	* doc/invoke.texi: Update the -Wrange-loop-construct description.

2020-11-21  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (ao_compare::compare_ao_refs,
	ao_compare::hash_ao_ref): Use OEP_MATCH_SIDE_EFFECTS.

2020-11-21  Jan Hubicka  <jh@suse.cz>

	* ipa-icf.c (sem_function::equals_wpa): Do not compare ODR type with
	-fno-devirtualize.
	(sem_item_optimizer::update_hash_by_addr_refs): Hash anonymous ODR
	types by TYPE_UID of their main variant.

2020-11-21  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Enable vector pair memcpy/memmove expansion.

2020-11-21  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/mma.md (unspec): Add assemble/extract UNSPECs.
	(movoi): Change to movoo.
	(*movpoi): Change to *movoo.
	(movxi): Change to movxo.
	(*movpxi): Change to *movxo.
	(mma_assemble_pair): Change to OO mode.
	(*mma_assemble_pair): New define_insn_and_split.
	(mma_disassemble_pair): New define_expand.
	(*mma_disassemble_pair): New define_insn_and_split.
	(mma_assemble_acc): Change to XO mode.
	(*mma_assemble_acc): Change to XO mode.
	(mma_disassemble_acc): New define_expand.
	(*mma_disassemble_acc): New define_insn_and_split.
	(mma_<acc>): Change to XO mode.
	(mma_<vv>): Change to XO mode.
	(mma_<avv>): Change to XO mode.
	(mma_<pv>): Change to OO mode.
	(mma_<apv>): Change to XO/OO mode.
	(mma_<vvi4i4i8>): Change to XO mode.
	(mma_<avvi4i4i8>): Change to XO mode.
	(mma_<vvi4i4i2>): Change to XO mode.
	(mma_<avvi4i4i2>): Change to XO mode.
	(mma_<vvi4i4>): Change to XO mode.
	(mma_<avvi4i4>): Change to XO mode.
	(mma_<pvi4i2>): Change to XO/OO mode.
	(mma_<apvi4i2>): Change to XO/OO mode.
	(mma_<vvi4i4i4>): Change to XO mode.
	(mma_<avvi4i4i4>): Change to XO mode.
	* config/rs6000/predicates.md (input_operand): Allow opaque.
	(mma_disassemble_output_operand): New predicate.
	* config/rs6000/rs6000-builtin.def:
	Changes to disassemble builtins.
	* config/rs6000/rs6000-call.c (rs6000_return_in_memory):
	Disallow __vector_pair/__vector_quad as return types.
	(rs6000_promote_function_mode): Remove function return type
	check because we can't test it here any more.
	(rs6000_function_arg): Do not allow __vector_pair/__vector_quad
	as as function arguments.
	(rs6000_gimple_fold_mma_builtin):
	Handle mma_disassemble_* builtins.
	(rs6000_init_builtins): Create types for XO/OO modes.
	* config/rs6000/rs6000-modes.def: DElete OI, XI,
	POI, and PXI modes, and create XO and OO modes.
	* config/rs6000/rs6000-string.c (expand_block_move):
	Update to OO mode.
	* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok_uncached):
	Update for XO/OO modes.
	(rs6000_rtx_costs): Make UNSPEC_MMA_XXSETACCZ cost 0.
	(rs6000_modes_tieable_p): Update for XO/OO modes.
	(rs6000_debug_reg_global): Update for XO/OO modes.
	(rs6000_setup_reg_addr_masks): Update for XO/OO modes.
	(rs6000_init_hard_regno_mode_ok): Update for XO/OO modes.
	(reg_offset_addressing_ok_p): Update for XO/OO modes.
	(rs6000_emit_move): Update for XO/OO modes.
	(rs6000_preferred_reload_class): Update for XO/OO modes.
	(rs6000_split_multireg_move): Update for XO/OO modes.
	(rs6000_mangle_type): Update for opaque types.
	(rs6000_invalid_conversion): Update for XO/OO modes.
	* config/rs6000/rs6000.h (VECTOR_ALIGNMENT_P):
	Update for XO/OO modes.
	* config/rs6000/rs6000.md (RELOAD): Update for XO/OO modes.

2020-11-21  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* typeclass.h: Add opaque_type_class.
	* builtins.c (type_to_class): Identify opaque type class.
	* dwarf2out.c (is_base_type): Handle opaque types.
	(gen_type_die_with_usage): Handle opaque types.
	* expr.c (count_type_elements): Opaque types should
	never have initializers.
	* ipa-devirt.c (odr_types_equivalent_p): No type-specific handling
	for opaque types is needed as it eventually checks the underlying
	mode which is what is important.
	* tree-streamer.c (record_common_node): Handle opaque types.
	* tree.c (type_contains_placeholder_1): Handle opaque types.
	(type_cache_hasher::equal): No additional comparison needed for
	opaque types.

2020-11-20  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-call.c (rs6000_expand_builtin): Add missing
	XSCMP* cases for IEEE 128-bit long double.

2020-11-20  Jason Merrill  <jason@redhat.com>

	PR c++/97918
	* dwarf2out.c (dwarf2out_early_finish): flush_limbo_die_list
	after gen_scheduled_generic_parms_dies.

2020-11-20  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97879
	* tree-core.h (enum attribute_flags): Add ATTR_FLAG_INTERNAL.

2020-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c (func_checker::hash_operand): Improve hashing of
	decls.

2020-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c (func_checker::compare_decl): Do not compare types
	of local variables.

2020-11-20  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi: Replace a couple of @code with @command

2020-11-20  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-slp.c (vectorizable_slp_permutation): Update types on nodes
	when needed.

2020-11-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (maybe_push_to_hybrid_worklist): New function.
	(vect_detect_hybrid_slp): Use it.  Perform a backward walk
	over the IL.

2020-11-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_print_slp_tree): Also dump
	SLP_TREE_REPRESENTATIVE.

2020-11-20  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/88101
	* builtins.def (BUILT_IN_CLEAR_PADDING): New built-in function.
	* gimplify.c (gimplify_call_expr): Rewrite single argument
	BUILT_IN_CLEAR_PADDING into two-argument variant.
	* gimple-fold.c (clear_padding_unit, clear_padding_buf_size): New
	const variables.
	(struct clear_padding_struct): New type.
	(clear_padding_flush, clear_padding_add_padding,
	clear_padding_emit_loop, clear_padding_type,
	clear_padding_union, clear_padding_real_needs_padding_p,
	clear_padding_type_may_have_padding_p,
	gimple_fold_builtin_clear_padding): New functions.
	(gimple_fold_builtin): Handle BUILT_IN_CLEAR_PADDING.
	* doc/extend.texi (__builtin_clear_padding): Document.

2020-11-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/97528
	* config/arm/arm.c (neon_vector_mem_operand): For POST_MODIFY, require
	first POST_MODIFY operand is a REG and is equal to the first operand
	of PLUS.

2020-11-20  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-store-merging.c (struct merged_store_group): Add
	new 'consecutive' field.
	(merged_store_group): Set it to true.
	(do_merge): Set it to false if the store is not consecutive and
	set string_concatenation to false in this case.
	(merge_into): Call do_merge on entry.
	(merge_overlapping): Likewise.

2020-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c (func_checker::operand_equal_p): Fix comment.

2020-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c (func_checker::hash_operand): Hash gimple clobber.
	(func_checker::operand_equal_p): Special case gimple clobber.

2020-11-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/97873
	* config/i386/i386.md (*neg<mode>2_2): Rename from
	"*neg<mode>2_cmpz".  Use CCGOCmode instead of CCZmode.
	(*negsi2_zext): Rename from *negsi2_cmpz_zext.
	Use CCGOCmode instead of CCZmode.
	(*neg<mode>_ccc_1): New insn pattern.
	(*neg<dwi>2_doubleword): Use *neg<mode>_ccc_1.
	(abs<mode>2): Add FLAGS_REG clobber.
	Use TARGET_CMOVE insn predicate.
	(*abs<mode>2_1): New insn_and_split pattern.
	(*absdi2_doubleword): Ditto.
	(<maxmin:code><mode>3): Use SWI48x mode iterator.
	(*<maxmin:code><mode>3): Use SWI48 mode iterator.
	* config/i386/i386-features.c
	(general_scalar_chain::compute_convert_gain): Handle ABS code.
	(general_scalar_chain::convert_insn): Ditto.
	(general_scalar_to_vector_candidate_p): Ditto.

2020-11-20  Jakub Jelinek  <jakub@redhat.com>

	PR other/97911
	* configure.ac: In SERIAL_LIST use lang words without .serial
	suffix.  Change $lang.prev from a target to variable and instead
	of depending on *.serial expand to the *.serial variable if
	the word is in the SERIAL_LIST at all, otherwise to nothing.
	* configure: Regenerated.

2020-11-20  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.md (p8_mtvsrd_df): Fix insn type.

2020-11-20  Martin Uecker  <muecker@gwdg.de>

	* gimplify.c (gimplify_modify_expr_rhs): Optimizie
	NOP_EXPRs that contain compound literals.

2020-11-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91029
	* range-op.cc (operator_trunc_mod::op1_range): Don't require signed
	types, nor require that op2 >= 0.  Implement (a % b) >= x && x > 0
	implies a >= x and (a % b) <= x && x < 0 implies a <= x.
	(operator_trunc_mod::op2_range): New method.

2020-11-19  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/93781
	* range-op.cc (get_shift_range): Rename from
	undefined_shift_range_check and now return valid shift ranges.
	(operator_lshift::fold_range): Use result from get_shift_range.
	(operator_rshift::fold_range): Ditto.

2020-11-19  Jan Hubicka  <jh@suse.cz>

	* fold-const.c (operand_compare::operand_equal_p): Fix thinko in
	COMPONENT_REF handling and guard types_same_for_odr by
	virtual_method_call_p.
	(operand_compare::hash_operand): Likewise.

2020-11-19  Jakub Jelinek  <jakub@redhat.com>

	PR c/97860
	* tree.c (array_type_nelts): For complete arrays with zero min
	and NULL max and zero size return -1.

2020-11-19  Nathan Sidwell  <nathan@acm.org>

	* configure.ac: Add tests for fstatat, sighandler_t, O_CLOEXEC,
	unix-domain and ipv6 sockets.
	* config.in: Rebuilt.
	* configure: Rebuilt.

2020-11-19  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/alu-zext.md: Add lmbd patterns for zero_extend
	variants.
	* config/pru/pru.c (enum pru_builtin): Add HALT and LMBD.
	(pru_init_builtins): Ditto.
	(pru_builtin_decl): Ditto.
	(pru_expand_builtin): Ditto.
	* config/pru/pru.h (CLZ_DEFINED_VALUE_AT_ZERO): Define PRU
	value for CLZ with zero value parameter.
	* config/pru/pru.md: Add halt, lmbd and clz patterns.
	* doc/extend.texi: Document PRU builtins.

2020-11-19  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi (-fvect-cost-model): Add a very-cheap model.
	* common.opt (fvect-cost-model=): Add very-cheap as a possible option.
	(fsimd-cost-model=): Likewise.
	(vect_cost_model): Add very-cheap.
	* flag-types.h (vect_cost_model): Add VECT_COST_MODEL_VERY_CHEAP.
	Put the values in order of increasing aggressiveness.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Use
	range checks when comparing against VECT_COST_MODEL_CHEAP.
	(vect_prune_runtime_alias_test_list): Do not allow any alias
	checks for the very-cheap cost model.
	* tree-vect-loop.c (vect_analyze_loop_costing): Do not allow
	any peeling for the very-cheap cost model.  Also require one
	iteration of the vector loop to pay for itself.

2020-11-19  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (neoversen1_tunings): Use new
	cortexa76_extra_costs.
	(neoversev1_tunings): Likewise.
	(neoversen2_tunines): Likewise.
	* config/arm/aarch-cost-tables.h (cortexa76_extra_costs):
	add new costs.

2020-11-19  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_cpymem): Cleanup code and
	comments, tweak expansion decisions and improve tail expansion.

2020-11-19  Richard Biener  <rguenther@suse.de>

	* fold-const.c (operand_compare::hash_operand): Fix typo.

2020-11-19  Richard Biener  <rguenther@suse.de>

	* tree-ssa-reassoc.c (get_rank): Refactor to consistently
	use the cache and dump ranks assigned.

2020-11-19  Jan Hubicka  <jh@suse.cz>

	* fold-const.c (operand_compare::operand_equal_p): More OBJ_TYPE_REF
	matching to correct place; drop OEP_ADDRESS_OF for TOKEN, OBJECT and
	class.
	(operand_compare::hash_operand): Hash ODR type for OBJ_TYPE_REF.

2020-11-19  Joel Hutton  <joel.hutton@arm.com>

	* config/aarch64/aarch64-simd.md: Add vec_widen_lshift_hi/lo<mode>
	patterns.
	* tree-vect-stmts.c (vectorizable_conversion): Fix for widen_lshift
	case.

2020-11-19  Joel Hutton  <joel.hutton@arm.com>

	* doc/generic.texi: Document new widen_plus/minus_lo/hi tree codes.
	* doc/md.texi: Document new widenening add/subtract hi/lo optabs.
	* expr.c (expand_expr_real_2): Add widen_add, widen_subtract cases.
	* optabs-tree.c (optab_for_tree_code): Add case for widening optabs.
	* optabs.def (OPTAB_D): Define vectorized widen add, subtracts.
	* tree-cfg.c (verify_gimple_assign_binary): Add case for widening adds,
	subtracts.
	* tree-inline.c (estimate_operator_cost): Add case for widening adds,
	subtracts.
	* tree-vect-generic.c (expand_vector_operations_1): Add case for
	widening adds, subtracts
	* tree-vect-patterns.c (vect_recog_widen_add_pattern): New recog
	pattern.
	(vect_recog_widen_sub_pattern): New recog pattern.
	(vect_recog_average_pattern): Update widened add code.
	(vect_recog_average_pattern): Update widened add code.
	* tree-vect-stmts.c (vectorizable_conversion): Add case for widened add,
	subtract.
	(supportable_widening_operation): Add case for widened add, subtract.
	* tree.def
	(WIDEN_PLUS_EXPR): New tree code.
	(WIDEN_MINUS_EXPR): New tree code.
	(VEC_WIDEN_ADD_HI_EXPR): New tree code.
	(VEC_WIDEN_PLUS_LO_EXPR): New tree code.
	(VEC_WIDEN_MINUS_HI_EXPR): New tree code.
	(VEC_WIDEN_MINUS_LO_EXPR): New tree code.

2020-11-19  Joel Hutton  <joel.hutton@arm.com>

	* config/aarch64/aarch64-simd.md: New patterns
	vec_widen_saddl_lo/hi_<mode>.

2020-11-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97901
	* tree-ssa-propagate.c (clean_up_loop_closed_phi): Compute
	dominators and use replace_uses_by.

2020-11-19  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.h (struct fixed_point_type_info) <scale_factor>: Turn
	numerator and denominator into a tree.
	* dwarf2out.c (base_type_die): In the case of a fixed-point type
	with arbitrary scale factor, call add_scalar_info on numerator and
	denominator to emit the appropriate attributes.

2020-11-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97897
	* tree-complex.c (complex_propagate::visit_stmt): Make sure
	abnormally used SSA names are VARYING.
	(complex_propagate::visit_phi): Likewise.
	* tree-ssa.c (verify_phi_args): Verify PHI arguments on abnormal
	edges are SSA names.

2020-11-19  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*<absneg:code><mode>2_i387_1):
	Disable for TARGET_SSE_MATH modes.

2020-11-19  Jeff Law  <law@redhat.com>

	* config/h8300/constraints.md (R constraint): Add argument to call
	to h8300_shift_needs_scratch_p.
	(S and T constraints): Similary.
	* config/h8300/h8300-protos.h: Update h8300_shift_needs_scratch_p
	prototype.
	* config/h8300/h8300.c (expand_a_shift): Emit a different pattern
	if the shift does not require a scratch register.
	(h8300_shift_needs_scratch_p): Refine to be more accurate.
	* config/h8300/shiftrotate.md (shiftqi_noscratch): New pattern.
	(shifthi_noscratch, shiftsi_noscratch): Similarly.

2020-11-18  Roger Sayle  <roger@nextmovesoftware.com>

	PR middle-end/85811
	* fold-const.c (tree_expr_finite_p): New function to test whether
	a tree expression must be finite, i.e. not a FP NaN or infinity.
	(tree_expr_infinite_p):  New function to test whether a tree
	expression must be infinite, i.e. a FP infinity.
	(tree_expr_maybe_infinite_p): New function to test whether a tree
	expression may be infinite, i.e. a FP infinity.
	(tree_expr_signaling_nan_p): New function to test whether a tree
	expression must evaluate to a signaling NaN (sNaN).
	(tree_expr_maybe_signaling_nan_p): New function to test whether a
	tree expression may be a signaling NaN (sNaN).
	(tree_expr_nan_p): New function to test whether a tree expression
	must evaluate to a (quiet or signaling) NaN.
	(tree_expr_maybe_nan_p): New function to test whether a tree
	expression me be a (quiet or signaling) NaN.
	(tree_binary_nonnegative_warnv_p) [MAX_EXPR]: In the presence
	of NaNs, MAX_EXPR is only guaranteed to be non-negative, if both
	operands are non-negative.
	(tree_call_nonnegative_warnv_p) [CASE_CFN_FMAX,CASE_CFN_FMAX_FN]:
	In the presence of signaling NaNs, fmax is only guaranteed to be
	non-negative if both operands are negative.  In the presence of
	quiet NaNs, fmax is non-negative if either operand is non-negative
	and not a qNaN, or both operands are non-negative.
	* fold-const.h (tree_expr_finite_p, tree_expr_infinite_p,
	tree_expr_maybe_infinite_p, tree_expr_signaling_nan_p,
	tree_expr_maybe_signaling_nan_p, tree_expr_nan_p,
	tree_expr_maybe_nan_p): Prototype new functions here.
	* builtins.c (fold_builtin_classify) [BUILT_IN_ISINF]: Fold to
	a constant if argument is known to be (or not to be) an Infinity.
	[BUILT_IN_ISFINITE]: Fold to a constant if argument is known to
	be (or not to be) finite.
	[BUILT_IN_ISNAN]: Fold to a constant if argument is known to be
	(or not to be) a NaN.
	(fold_builtin_fpclassify): Check tree_expr_maybe_infinite_p and
	tree_expr_maybe_nan_p instead of HONOR_INFINITIES and HONOR_NANS
	respectively.
	(fold_builtin_unordered_cmp): Fold UNORDERED_EXPR to a constant
	when its arguments are known to be (or not be) NaNs.  Check
	tree_expr_maybe_nan_p instead of HONOR_NANS when choosing between
	unordered and regular forms of comparison operators.
	* match.pd (ordered(x,y)->true/false): Constant fold ORDERED_EXPR
	if its operands are known to be (or not to be) NaNs.
	(unordered(x,y)->true/false): Constant fold UNORDERED_EXPR if its
	operands are known to be (or not to be) NaNs.
	(sqrt(x)*sqrt(x)->x): Check tree_expr_maybe_signaling_nan_p instead
	of HONOR_SNANS.

2020-11-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91029
	PR tree-optimization/97888
	* range-op.cc (operator_trunc_mod::op1_range): Only set op1
	range to >= 0 if lhs is > 0, rather than >= 0.  Fix up comments.

2020-11-18  Jakub Jelinek  <jakub@redhat.com>

	* opts.h (struct cl_var): New type.
	(cl_vars): Declare.
	* optc-gen.awk: Generate cl_vars array.

2020-11-18  Eugene Rozenfeld  <Eugene.Rozenfeld@microsoft.com>

	PR tree-optimization/96671
	* match.pd (three xor patterns): New patterns.

2020-11-18  Jakub Jelinek  <jakub@redhat.com>

	* optc-save-gen.awk: Initialize var_opt_init.  In
	cl_optimization_stream_out for params with default values larger than
	10, xor the default value with the actual parameter value.  In
	cl_optimization_stream_in repeat the above xor.

2020-11-18  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac: Add $lang.prev rules, INDEX.$lang and SERIAL_LIST and
	SERIAL_COUNT variables to Make-hooks.
	(--enable-link-serialization): New configure option.
	* Makefile.in (DO_LINK_SERIALIZATION, LINK_PROGRESS): New variables.
	* doc/install.texi (--enable-link-serialization): Document.
	* configure: Regenerated.

2020-11-18  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/97870
	* lra-constraints.c (curr_insn_transform): Do not delete asm goto
	with wrong constraints.  Nullify it saving CFG.

2020-11-18  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (mulhi3): New.
	(mulsi3): New.
	(mulsidi3): Rename to *mulsidi3_inline.
	(umulsidi3): Rename to *umulsidi3_inline.
	(mulsidi3): New define_expand.
	(umulsidi3): New define_expand.

2020-11-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97886
	* tree-vect-loop.c (vectorizable_lc_phi): Properly assign
	vector types to invariants for SLP.

2020-11-18  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config.gcc (*-*-dragonfly*): Add dragonfly-d.o and t-dragonfly.
	* config/dragonfly-d.c: New file.
	* config/t-dragonfly: New file.

2020-11-18  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/97862
	* omp-expand.c (expand_omp_for_init_vars): Don't use the sqrt path
	if number of iterations is constant 0.

2020-11-18  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_ext_version): New.
	(riscv_ext_version_table): Ditto.
	(get_default_version): Ditto.
	(riscv_subset_t::implied_p): New field.
	(riscv_subset_t::riscv_subset_t): Init implied_p.
	(riscv_subset_list::add): New.
	(riscv_subset_list::handle_implied_ext): Pass riscv_subset_t
	instead of separated argument.
	(riscv_subset_list::to_string): Handle zifencei and zicsr, and
	omit version if version is unknown.
	(riscv_subset_list::parsing_subset_version): New argument `ext`,
	remove default_major_version and default_minor_version, get
	default version info via get_default_version.
	(riscv_subset_list::parse_std_ext): Update argument for
	parsing_subset_version calls.
	Handle 2.2 ISA spec, always enable zicsr and zifencei, they are
	included in baseline ISA in that time.
	(riscv_subset_list::parse_multiletter_ext): Update argument for
	`parsing_subset_version` and `add` calls.
	(riscv_subset_list::parse): Adjust argument for
	riscv_subset_list::handle_implied_ext call.
	* config.gcc (riscv*-*-*): Handle --with-isa-spec=.
	* config.in (HAVE_AS_MISA_SPEC): New.
	(HAVE_AS_MARCH_ZIFENCEI): Ditto.
	* config/riscv/riscv-opts.h (riscv_isa_spec_class): New.
	(riscv_isa_spec): Ditto.
	* config/riscv/riscv.h (HAVE_AS_MISA_SPEC): New.
	(ASM_SPEC): Pass -misa-spec if gas supported.
	* config/riscv/riscv.opt (riscv_isa_spec_class) New.
	* configure.ac (HAVE_AS_MARCH_ZIFENCEI): New test.
	(HAVE_AS_MISA_SPEC): Ditto.
	* configure: Regen.

2020-11-18  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_implied_info):
	d and f implied zicsr.
	(riscv_ext_flag_table): Handle zicsr and zifencei.
	* config/riscv/riscv-opts.h (MASK_ZICSR): New.
	(MASK_ZIFENCEI): Ditto.
	(TARGET_ZICSR): Ditto.
	(TARGET_ZIFENCEI): Ditto.
	* config/riscv/riscv.md (clear_cache): Check TARGET_ZIFENCEI.
	(fence_i): Ditto.
	* config/riscv/riscv.opt (riscv_zi_subext): New.

2020-11-18  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (single_letter_subset_rank): New.
	(multi_letter_subset_rank): Ditto.
	(subset_cmp): Ditto.
	(riscv_subset_list::add): Insert subext in canonical ordering.
	(riscv_subset_list::parse_std_ext): Move handle_implied_ext to ...
	(riscv_subset_list::parse): ... here.

2020-11-18  Jiufu Guo   <guojiufu@linux.ibm.com>

	* cfgloop.h (loop_optimizer_finalize): Add flag argument.
	* loop-init.c (loop_optimizer_finalize): Call clean_up_loop_closed_phi.
	* tree-cfgcleanup.h (clean_up_loop_closed_phi): New declare.
	* tree-ssa-loop.c (tree_ssa_loop_done): Call loop_optimizer_finalize
	with flag argument.
	* tree-ssa-propagate.c (clean_up_loop_closed_phi): New function.

2020-11-17  Sebastian Pop  <spop@amazon.com>

	* config.gcc: add configure flags --with-{cpu,arch,tune}-{32,64}
	as alias flags for --with-{cpu,arch,tune} on AArch64.
	* doc/install.texi: Document new flags for aarch64.

2020-11-17  Sebastian Pop  <spop@amazon.com>

	* config.gcc: Add --with-tune to AArch64 configure flags.

2020-11-17  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/91029
	* range-op.cc (operator_trunc_mod::op1_range): New.

2020-11-17  Jan Hubicka  <jh@suse.cz>

	* ipa-icf.c (sem_function::hash_stmt): Fix conditional on
	variably_modified_type_p.

2020-11-17  Nathan Sidwell  <nathan@acm.org>

	* tree.h (cache_integer_cst): Add defaulted might_duplicate parm.
	* tree.c (cache_integer_cst): Return the integer cst, add
	might_duplicate parm to permit finding a small duplicate.

2020-11-17  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/83072
	* range-op.cc (wi_optimize_and_or): Remove zero from IOR range when
	mask is non-zero.

2020-11-17  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.h (CR_DECIMAL_DIG): Also define for
	[__STDC_WANT_IEC_60559_EXT__].

2020-11-17  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.h [__STDC_VERSION__ > 201710L] (FLT_IS_IEC_60559,
	DBL_IS_IEC_60559, LDBL_IS_IEC_60559): New macros.

2020-11-17  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/96791
	* mode-classes.def: Add MODE_OPAQUE.
	* machmode.def: Add OPAQUE_MODE.
	* tree.def: Add OPAQUE_TYPE for types that will use
	MODE_OPAQUE.
	* doc/generic.texi: Document OPAQUE_TYPE.
	* doc/rtl.texi: Document MODE_OPAQUE.
	* machmode.h: Add OPAQUE_MODE_P().
	* genmodes.c (complete_mode): Add MODE_OPAQUE.
	(opaque_mode): New function.
	* tree.c (tree_code_size): Add OPAQUE_TYPE.
	* tree.h: Add OPAQUE_TYPE_P().
	* stor-layout.c (int_mode_for_mode): Treat MODE_OPAQUE modes
	like BLKmode.
	* ira.c (find_moveable_pseudos): Treat MODE_OPAQUE modes more
	like integer/float modes here.
	* dbxout.c (dbxout_type): Treat OPAQUE_TYPE like VOID_TYPE.
	* tree-pretty-print.c (dump_generic_node): Treat OPAQUE_TYPE
	like like other types.

2020-11-17  Jan Hubicka  <hubicka@ucw.cz>
	    Martin Liska  <mliska@suse.cz>

	* ipa-icf.c: Include data-streamer.h and alias.h.
	(sem_function::sem_function): Initialize memory_access_types
	and m_alias_sets_hash.
	(sem_function::hash_stmt): For memory accesses and when going to
	do lto streaming add base and ref types into memory_access_types.
	(sem_item_optimizer::write_summary): Stream memory access types.
	(sem_item_optimizer::read_section): Likewise and also iniitalize
	m_alias_sets_hash.
	(sem_item_optimizer::execute): Call
	sem_item_optimizer::update_hash_by_memory_access_type.
	(sem_item_optimizer::update_hash_by_memory_access_type): Updat.
	* ipa-icf.h (sem_function): Add memory_access_types and
	m_alias_sets_hash.

2020-11-17  Jan Hubicka  <jh@suse.cz>

	PR bootstrap/97857
	* ipa-devirt.c (odr_based_tbaa_p): Do not ICE when
	odr_hash is not initialized
	* ipa-utils.h (type_with_linkage_p): Do not sanity check
	CXX_ODR_P.
	* tree-streamer-out.c (pack_ts_type_common_value_fields): Set
	CXX_ODR_P according to the canonical type.

2020-11-17  Nathan Sidwell  <nathan@acm.org>

	* langhooks-def.h (LANG_HOOKS_PREPROCESS_MAIN_FILE)
	(LANG_HOOKS_PREPROCESS_OPTIONS, LANG_HOOKS_PREPROCESS_UNDEF)
	(LANG_HOOKS_PREPROCESS_TOKEN): New.
	(LANG_HOOKS_INITIALIZER): Add them.
	* langhooks.h (struct lang_hooks): Add preprocess_main_file,
	preprocess_options, preprocess_undef, preprocess_token hooks.  Add
	enum PT_flags.

2020-11-17  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/97693
	* tree-vect-stmts.c (vectorizable_call): Pass the required vectype
	to vect_get_vec_defs_for_operand.

2020-11-17  Liu Hao  <lh_mouse@126.com>

	* config/i386/msformat-c.c: Add more length modifiers.

2020-11-17  Tamar Christina  <tamar.christina@arm.com>

	PR driver/97574
	* gcc.c (convert_filename): Don't add suffix to things that are
	not files.
	(not_actual_file_p): Use supplied argument.

2020-11-17  Haochen Gui  <guihaoc@gcc.gnu.org>

	* final.c (final_scan_insn_1): Set jump table relocatable as the
	second argument of targetm.asm_out.function_rodata_section.
	* output.h (default_function_rodata_section,
	default_no_function_rodata_section): Add the second argument to the
	declarations.
	* target.def (function_rodata_section): Change the doc and add
	the second argument.
	* doc/tm.texi: Regenerate.
	* varasm.c (jumptable_relocatable): Implement.
	(default_function_rodata_section): Add the second argument
	and the support for relocatable read only sections.
	(default_no_function_rodata_section): Add the second argument.
	(function_mergeable_rodata_prefix): Set the second argument to false.
	* config/mips/mips.c (mips_function_rodata_section): Add the second
	arugment and set it to false.
	* config/s390/s390.c (targetm.asm_out.function_rodata_section): Set
	the second argument to false.
	* config/s390/s390.md: Likewise.

2020-11-17  liuhongt  <hongtao.liu@intel.com>

	PR target/97194
	* config/i386/i386-expand.c (ix86_expand_vector_set_var): New function.
	* config/i386/i386-protos.h (ix86_expand_vector_set_var): New Decl.
	* config/i386/predicates.md (vec_setm_operand): New predicate,
	true for const_int_operand or register_operand under TARGET_AVX2.
	* config/i386/sse.md (vec_set<mode>): Support both constant
	and variable index vec_set.

2020-11-17  Martin Sebor  <msebor@redhat.com>

	* tree-ssa-uninit.c (maybe_warn_operand): Call is_empty_type.
	* tree.c (default_is_empty_type): Rename...
	(is_empty_type): ...to this.
	* tree.h (is_empty_type): Declare.

2020-11-17  Martin Sebor  <msebor@redhat.com>

	PR middle-end/95673
	* tree-ssa-strlen.c (used_only_for_zero_equality): Rename...
	(use_in_zero_equality): ...to this.  Add a default argument.
	(handle_builtin_memcmp): Adjust to the name change above.
	(handle_builtin_string_cmp): Same.
	(maybe_warn_pointless_strcmp): Same.  Pass in an explicit argument.

2020-11-17  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.h (DEC32_SNAN, DEC64_SNAN, DEC128_SNAN): New C2x
	macros.

2020-11-17  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.h (INFINITY, NAN, FLT_SNAN, DBL_SNAN, LDBL_SNAN)
	(FLT16_SNAN, FLT32_SNAN, FLT64_SNAN, FLT128_SNAN, FLT32X_SNAN)
	(FLT64X_SNAN, FLT128X_SNAN, DEC_INFINITY, DEC_NAN): New C2x
	macros.
	* doc/sourcebuild.texi (Effective-Target Keywords): Document inff.

2020-11-17  Armin Brauns via Gcc-patches  <gcc-patches@gcc.gnu.org>

	* gcc.c: Document %T spec file directive.
	* doc/invoke.texi: Remove %p, %P spec file directives.
	Add %M, %R, %V, %nSTR, %>S, %<S*, %{%:function(args):X}, %@{...} spec
	file directives add sanitize, version-compare, include, gt and
	debug-level-gt spec functions.

2020-11-16  Roger Sayle  <roger@nextmovesoftware.com>

	PR rtl-optimization/92180
	* config/i386/i386.c (ix86_hardreg_mov_ok): New function to
	determine whether (set DST SRC) should be allowed at this point.
	* config/i386/i386-protos.h (ix86_hardreg_mov_ok): Prototype here.
	* config/i386/i386-expand.c (ix86_expand_move): Check whether
	this is a complex set of a likely spilled hard register, and if
	so place the value in a pseudo, and load the hard reg from it.
	* config/i386/i386.md (*movdi_internal, *movsi_internal)
	(*movhi_internal, *movqi_internal): Make these instructions
	conditional on ix86_hardreg_mov_ok.
	(*lea<mode>): Make this define_insn_and_split conditional on
	ix86_hardreg_mov_ok.

2020-11-16  Martin Liska  <mliska@suse.cz>

	* params.opt: Add missing dot.

2020-11-16  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (escape_point): New type.
	(modref_lattice): New type.
	(escape_entry): New type.
	(escape_summary): New type.
	(escape_summaries_t): New type.
	(escape_summaries): New static variable.
	(eaf_flags_useful_p): New function.
	(modref_summary::useful_p): Add new check_flags
	attribute; check eaf_flags for usefulness.
	(modref_summary_lto): Add arg_flags.
	(modref_summary_lto::useful_p): Add new check_flags
	attribute; check eaf_flags for usefulness.
	(dump_modref_edge_summaries): New function.
	(remove_modref_edge_summaries): New function.
	(ignore_retval_p): New predicate.
	(ignore_stores_p): Also ignore for const.
	(remove_summary): Call remove_modref_edge_summaries.
	(modref_lattice::init): New member function.
	(modref_lattice::release): New member unction.
	(modref_lattice::dump): New member function.
	(modref_lattice::add_escape_point): New member function.
	(modref_lattice::merge): Two new member functions.
	(modref_lattice::merge_deref): New member functions.
	(modref_lattice::merge_direct_load): New member function.
	(modref_lattice::merge_direct_store): New member function.
	(call_lhs_flags): Rename to ...
	(merge_call_lhs_flags): ... this one; reimplement using
	modreflattice.
	(analyze_ssa_name_flags): Replace KNOWN_FLAGS param by LATTICE;
	add IPA parametr; use modref_lattice.
	(analyze_parms): New parameter IPA and SUMMARY_LTO; update for
	modref_lattice; initialize escape_summary.
	(analyze_function): Allocate escape_summaries; update uses of useful_p.
	(modref_write_escape_summary): New function.
	(modref_read_escape_summary): New function.
	(modref_write): Write escape summary.
	(read_section): Read escape summary.
	(modref_read): Initialie escape_summaries.
	(remap_arg_flags): New function.
	(update_signature): Use it.
	(escape_map): New structure.
	(update_escape_summary_1, update_escape_summary): New functions.
	(ipa_merge_modref_summary_after_inlining): Merge escape summaries.
	(propagate_unknown_call): Do not remove useless summaries.
	(remove_useless_summaries): Remove them here.
	(modref_propagate_in_scc): Update; do not dump scc.
	(modref_propagate_dump_scc): New function.
	(modref_merge_call_site_flags): New function.
	(modref_propagate_flags_in_scc): New function.
	(pass_ipa_modref::execute): Use modref_propagate_flags_in_scc
	and modref_propagate_dump_scc; delete escape_summaries.
	(ipa_modref_c_finalize):  Remove escape_summaries.
	* ipa-modref.h (modref_summary): Update prototype of useful_p.
	* params.opt (param=modref-max-escape-points): New param.
	* doc/invoke.texi (modref-max-escape-points): Document.

2020-11-16  Jan Hubicka  <jh@suse.cz>

	PR middle-end/97840
	* ipa-modref.c (analyze_ssa_name_flags): Skip clobbers if inlining
	is done.
	* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Make stmt gcall;
	skip const calls and unused arguments.
	(warn_uninitialized_vars): Update prototype.

2020-11-16  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_gather_slp_loads): Declare.
	* tree-vect-loop.c (vect_analyze_loop_2): Call
	vect_gather_slp_loads.
	* tree-vect-slp.c (vect_build_slp_instance): Do not gather
	SLP loads here.
	(vect_gather_slp_loads): Remove wrapper, new function.
	(vect_slp_analyze_bb_1): Call it.

2020-11-16   Richard Biener  <rguenther@suse.de>

	* tree-ssa-loop-im.c (analyze_memory_references): Add
	store_motion parameter and elide unnecessary work.
	(tree_ssa_lim_initialize): Likewise.
	(loop_invariant_motion_in_fun): Pass down store_motion.

2020-11-16  Martin Liska  <mliska@suse.cz>

	* params.opt: All modref parameters miss Optimization and Param
	keyword as seen in testsuite failure.

2020-11-16  Jan Hubicka  <jh@suse.cz>

	* params.opt (-param=modref-max-depth=): Add missing full stop.

2020-11-16  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* common.opt (fprofile-info-section): New.
	* coverage.c (build_gcov_info_var_registration): New.
	(coverage_obj_init): Evaluate profile_info_section and use
	build_gcov_info_var_registration().
	* doc/invoke.texi (fprofile-info-section): Document.
	* opts.c (common_handle_option): Process fprofile-info-section
	option.

2020-11-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97838
	* tree-vect-slp.c (vect_slp_build_vertices): Properly handle
	not backwards reachable cycles.
	(vect_optimize_slp): Check a node is leaf before marking it
	visited.

2020-11-16  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/97736
	* tree-switch-conversion.c (switch_decision_tree::analyze_switch_statement):
	Prefer bit tests.

2020-11-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97835
	* tree-vect-loop.c (vectorizable_induction): Convert step
	scalars rather than step vector.

2020-11-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97830
	* tree-ssa-sccvn.c (vn_reference_eq): Check for incomplete
	types before comparing TYPE_SIZE.

2020-11-16  Cui,Lili  <lili.cui@intel.com>

	* config/i386/i386.h: Add PREFETCHW to march=broadwell.
	* doc/invoke.texi: Put PREFETCHW back to relation arch.

2020-11-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_output_labelref): Don't process mspabi
	hwmult library function names into GCC-style names.

2020-11-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_use_16bit_hwmult): New.
	(use_32bit_hwmult): Rename to..
	(msp430_use_32bit_hwmult): ..this.
	(msp430_muldiv_costs): Use msp430_use_16bit_hwmult and
	msp430_use_32bit_hwmult.
	(msp430_expand_helper): Use msp430_use_16bit_hwmult and
	msp430_use_32bit_hwmult.
	(msp430_output_labelref): Use msp430_use_32bit_hwmult.

2020-11-15  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_rtx_costs): Use `rtx_code' rather than
	`int' for `code'.

2020-11-15  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_output_int_add) <E_DImode>: Fix a typo
	in NO_EXTERNAL_INDIRECT_ADDRESS.

2020-11-15  Maciej W. Rozycki  <macro@linux-mips.org>

	* config/vax/vax.c (vax_output_int_add) <E_SImode>: Also check
	`operands[2]' for being symbolic with PIC rather than checking
	`operands[1]' twice.

2020-11-15  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (vr_values::extract_range_builtin): Rename to...
	(vr_values::extract_range_from_ubsan_builtin): ...this.
	Remove everything but UBSAN code.
	(vr_values::extract_range_basic): Call ranger version for
	everything except UBSAN built-ins.
	* vr-values.h (class vr_values): Rename extract_range_builtin to
	extract_range_from_ubsan_builtin.

2020-11-15  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra.c (lra_process_new_insns): Don't put reload insns in the
	last empty BB.

2020-11-15  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (analyze_ssa_name_flags): Make return to clear
	EAF_UNUSED flag.

2020-11-14  Jan Hubicka  <jh@suse.cz>

	* gimple.c: Include ipa-modref-tree.h and ipa-modref.h.
	(gimple_call_arg_flags): Use modref to determine flags.
	* ipa-modref.c: Include gimple-ssa.h, tree-phinodes.h,
	tree-ssa-operands.h, stringpool.h and tree-ssanames.h.
	(analyze_ssa_name_flags): Declare.
	(modref_summary::useful_p): Summary is also useful if arg flags are
	known.
	(dump_eaf_flags): New function.
	(modref_summary::dump): Use it.
	(get_modref_function_summary): Be read for current_function_decl
	being NULL.
	(memory_access_to): New function.
	(deref_flags): New function.
	(call_lhs_flags): New function.
	(analyze_parms): New function.
	(analyze_function): Use it.
	* ipa-modref.h (struct modref_summary): Add arg_flags.
	* doc/invoke.texi (ipa-modref-max-depth): Document.
	* params.opt (ipa-modref-max-depth): New param.

2020-11-14  Jakub Jelinek  <jakub@redhat.com>

	PR debug/97599
	* dwarf2out.c (gen_subprogram_die): Call
	gen_unspecified_parameters_die even if not early dwarf, but only
	if subr_die is a newly created DIE.

2020-11-14  Monk Chiang  <monk.chiang@sifive.com>

	PR target/97682
	* config/riscv/riscv.h (RISCV_PROLOGUE_TEMP_REGNUM): Change register
	to t0.
	(RISCV_CALL_ADDRESS_TEMP_REGNUM): New Marco, define t1 register.
	(RISCV_CALL_ADDRESS_TEMP): Use it for call instructions.
	* config/riscv/riscv.c (riscv_legitimize_call_address): Use
	RISCV_CALL_ADDRESS_TEMP.
	(riscv_compute_frame_info): Change temporary register to t0 form t1.
	(riscv_trampoline_init): Adjust comment.

2020-11-14  Jim Wilson  <jimw@sifive.com>
	    cooper.joshua  <cooper.joshua@linux.alibaba.com>

	* config/riscv/riscv.c (riscv_asan_shadow_offset): New.
	(TARGET_ASAN_SHADOW_OFFSET): New.
	* doc/tm.texi: Regenerated.
	* target.def (asan_shadow_offset); Mention that it can return zero.
	* toplev.c (process_options): Check for and handle zero return from
	targetm.asan_shadow_offset call.

2020-11-14  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_omp_for): Add OMP_CLAUSE_ALLOCATE_ALLOCATOR
	decls as firstprivate on task clauses even when allocate clause
	decl is not lastprivate.
	* omp-low.c (install_var_field): Don't dereference omp_is_reference
	types if mask is 33 rather than 1.
	(scan_sharing_clauses): Populate allocate_map even for task
	constructs.  For now remove it back for variables mentioned in
	reduction and in_reduction clauses on task/taskloop constructs
	or on VLA task firstprivates.  For firstprivate on task construct,
	install the var field into field_map with by_ref and 33 instead
	of false and 1 if mentioned in allocate clause.
	(lower_private_allocate): Set TREE_THIS_NOTRAP on the created
	MEM_REF.
	(lower_rec_input_clauses): Handle allocate for task firstprivatized
	non-VLA variables.
	(create_task_copyfn): Likewise.

2020-11-13  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (ao_ref_base_alias_ptr_type): Remove accidental
	commit.
	(ao_ref_alias_ptr_type): Remove accidental commit.

2020-11-13  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* omp-oacc-kernels-decompose.cc (maybe_build_inner_data_region):
	Use langhook instead of accessing language-specific decl
	information.

2020-11-13  Gergö Barany  <gergo@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* omp-oacc-kernels-decompose.cc: New.
	* Makefile.in (OBJS): Add it.
	* passes.def: Instantiate it.
	* tree-pass.h (make_pass_omp_oacc_kernels_decompose): Declare.
	* flag-types.h (enum openacc_kernels): Add.
	* doc/invoke.texi (-fopenacc-kernels): Document.
	* gimple.h (enum gf_mask): Add
	'GF_OMP_TARGET_KIND_OACC_PARALLEL_KERNELS_PARALLELIZED',
	'GF_OMP_TARGET_KIND_OACC_PARALLEL_KERNELS_GANG_SINGLE',
	'GF_OMP_TARGET_KIND_OACC_DATA_KERNELS'.
	(is_gimple_omp_oacc, is_gimple_omp_offloaded): Handle these.
	* gimple-pretty-print.c (dump_gimple_omp_target): Likewise.
	* omp-expand.c (expand_omp_target, build_omp_regions_1)
	(omp_make_gimple_edges): Likewise.
	* omp-low.c (scan_sharing_clauses, scan_omp_for)
	(check_omp_nesting_restrictions, lower_oacc_reductions)
	(lower_oacc_head_mark, lower_omp_target): Likewise.
	* omp-offload.c (execute_oacc_device_lower): Likewise.

2020-11-13  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (scan_sharing_clauses, scan_omp_for)
	(lower_oacc_reductions, lower_omp_target): More explicit checking
	of which OMP constructs we're expecting.

2020-11-13  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-expand.c (expand_omp_target): Attach an attribute to all
	outlined OpenACC compute regions.
	* omp-offload.c (execute_oacc_device_lower): Adjust.

2020-11-13  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_summaries::insert,
	modref_summaries_lto::insert): Remove summary if ipa-modref is disabled.

2020-11-13  Jan Hubicka  <jh@suse.cz>

	* attr-fnspec.h (attr_fnspec::arg_readonly_p): Accept '1'...'9'.

2020-11-13  Peter Jones  <pjones@redhat.com>

	* doc/extend.texi: Clarify the documentation for the ms_abi
	function attribute.

2020-11-13  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range.h (gimple_range_handler): Cast to gimple stmt
	kinds before asking for code and type.
	* gimple.h (gimple_expr_code): Call gassign and gcond routines
	to get their expr_code.

2020-11-13  Jason Merrill  <jason@redhat.com>

	* dwarf2out.c (gen_enumeration_type_die): Call
	equate_decl_number_to_die for enumerators.
	(gen_member_die): Don't move enumerators to their
	enclosing class.
	(dwarf2out_imported_module_or_decl_1): Allow importing
	individual enumerators.
	(force_decl_die): Handle CONST_DECL.

2020-11-13  Vladimir N. Makarov  <vmakarov@redhat.com>

	* cfgexpand.c (expand_asm_stmt): Output asm goto with outputs too.
	Place insns after asm goto on edges.
	* doc/extend.texi: Reflect the changes in asm goto documentation.
	* gimple.c (gimple_build_asm_1): Remove an assert checking output
	absence for asm goto.
	* gimple.h (gimple_asm_label_op, gimple_asm_set_label_op): Take
	possible asm goto outputs into account.
	* ira.c (ira): Remove critical edges for potential asm goto output
	reloads.
	(ira_nullify_asm_goto): New function.
	* ira.h (ira_nullify_asm_goto): New prototype.
	* lra-assigns.c (lra_split_hard_reg_for): Use ira_nullify_asm_goto.
	Check that splitting is done inside a basic block.
	* lra-constraints.c (curr_insn_transform): Permit output reloads
	for any jump insn.
	* lra-spills.c (lra_final_code_change): Remove USEs added in ira
	for asm gotos.
	* lra.c (lra_process_new_insns): Place output reload insns after
	jumps in the beginning of destination BBs.
	* reload.c (find_reloads): Report error for asm gotos with
	outputs.  Modify them to keep CFG consistency to avoid crashes.
	* tree-into-ssa.c (rewrite_stmt): Don't put debug stmt after asm
	goto.

2020-11-13  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (scan_sharing_clauses): For now remove for reduction
	clauses with inscan or task modifiers decl from allocate_map.
	(lower_private_allocate): Handle TYPE_P (new_var).
	(lower_rec_input_clauses): Handle allocate clause for C/C++ array
	reductions.

2020-11-13  Martin Jambor  <mjambor@suse.cz>

	PR ipa/97816
	* ipa-cp.c (value_topo_info<valtype>::propagate_effects): Use
	safe_add instead of a simple addition.

2020-11-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (TARGET_INSN_COST): Define.
	(msp430_insn_cost): New function.
	* config/msp430/msp430.h (BRANCH_COST): Define.
	(LOGICAL_OP_NON_SHORT_CIRCUIT): Define.

2020-11-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430-protos.h (msp430x_extendhisi): Return int
	instead of char *.
	(msp430_output_asm_shift_insns): Likewise.
	Add new return_length argument.
	(msp430x_insn_required): Add prototype.
	* config/msp430/msp430.c (msp430_output_asm_shift_insns): Return the
	total length, in bytes, of the emitted instructions.
	(msp430x_insn_required): New function.
	(msp430x_extendhisi): Return the total length, in bytes, of the
	emitted instructions.
	* config/msp430/msp430.h (ADJUST_INSN_LENGTH): Define.
	* config/msp430/msp430.md: New define_attr "type".
	New define_attr "extension".
	New define_attr "length_multiplier".
	New define_attr "extra_length".
	Rewrite define_attr "length".
	Set type, extension, length, length_multiplier or extra_length insn
	attributes on all insns, as appropriate.
	(andneghi3): Rewrite using constraints instead of C code to decide
	output insns.
	* config/msp430/predicates.md (msp430_cheap_operand): New predicate.
	(msp430_high_memory_operand): New predicate.

2020-11-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (use_helper_for_const_shift): Add forward
	declaration.
	Remove unused argument.
	(struct msp430_multlib_costs): New struct.
	(msp430_is_mem_indirect): New function.
	(msp430_costs): Likewise.
	(msp430_shift_costs): Likewise.
	(msp430_muldiv_costs): Likewise.
	(msp430_get_inner_dest_code): Likewise.
	(msp430_single_op_cost): Likewise.
	(msp430_rtx_costs): Rewrite from scratch.
	(msp430_expand_shift): Adjust use_helper_for_const_shift call.

2020-11-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (struct single_op_cost): New struct.
	(struct double_op_cost): Likewise.
	(TARGET_REGISTER_MOVE_COST): Don't define but add comment.
	(TARGET_MEMORY_MOVE_COST): Define to...
	(msp430_memory_move_cost): New function.
	(BRANCH_COST): Don't define but add comment.

2020-11-13  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c: Include tree-ssa-alias-compare.h.
	(find_checker::func_checker): Initialize m_tbaa.
	(func_checker::hash_operand): Use hash_ao_ref for memory accesses.
	(func_checker::compare_operand): Use compare_ao_refs for memory
	accesses.
	(func_checker::cmopare_gimple_assign): Do not check LHS types
	of memory stores.
	* ipa-icf-gimple.h (func_checker): Derive from ao_compare;
	add m_tbaa.
	* ipa-icf.c: Include tree-ssa-alias-compare.h.
	(sem_function::equals_private): Update call of
	func_checker::func_checker.
	* ipa-utils.h (lto_streaming_expected_p): New inline
	predicate.
	* tree-ssa-alias-compare.h: New file.
	* tree-ssa-alias.c: Include tree-ssa-alias-compare.h
	and bultins.h
	(view_converted_memref_p): New function.
	(types_equal_for_same_type_for_tbaa_p): New function.
	(ao_ref_alias_ptr_type, ao_ref_base_alias_ptr_type): New functions.
	(ao_compare::compare_ao_refs): New member function.
	(ao_compare::hash_ao_ref): New function
	* tree-ssa-alias.h (ao_ref_base_alias_ptr_type,
	ao_ref_alias_ptr_type): Declare.

2020-11-13  Jan Hubicka  <jh@suse.cz>

	* ipa-icf-gimple.c: Include gimple-walk.h.
	(func_checker::compare_ssa_name): Update call of compare_operand.
	(func_checker::hash_operand): Fix comment and add variant taking
	operand_access_type parameter.
	(func_checker::compare_operand): Add operand_access_type parameter.
	(func_checker::compare_asm_inputs_outputs): Add
	operand_access_type_map parameter; update use of
	func_checker::compare_operand.
	(func_checker::compare_gimple_call): Update use of
	func_checker::compare_operand.
	(func_checker::compare_gimple_assign): Likewise.
	(func_checker::compare_gimple_cond): Likewise.
	(func_checker::compare_gimple_switch): Likewise.
	(func_checker::compare_gimple_return): Likewise.
	(func_checker::compare_gimple_goto): Likewise.
	(func_checker::compare_gimple_asm): Likewise.
	(visit_load_store): New static functio.
	(func_checker::classify_operands): New member function.
	(func_checker::get_operand_access_type): New member function.
	* ipa-icf-gimple.h (func_checker::operand_access_type): New enum
	(func_checker::operand_access_type_map): New typedef.
	(func_checker::compare_operand): Update prototype.
	(func_checker::compare_asm_inputs_outputs): Likewise.
	(func_checker::cleassify_operands): Declare.
	(func_checker::get_operand_access_type): Declare.
	(func_checker::hash_operand): New variant with operand_access_type.
	* ipa-icf.c (sem_function::hash_stmt): Update uses of hash_operand.
	(sem_function::compare_phi_node): Update use of compare_operand.

2020-11-13  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/aarch-common.c (aarch_accumulator_forwarding): Use
	RTL predicates where possible.
	* config/arm/arm.c (legitimate_pic_operand_p)
	(legitimize_pic_address, arm_is_segment_info_known)
	(can_avoid_literal_pool_for_label_p)
	(thumb1_legitimate_address_p, arm_legitimize_address)
	(arm_tls_referenced_p, thumb_legitimate_constant_p)
	(REG_OR_SUBREG_REG, thumb1_rtx_costs, thumb1_size_rtx_costs)
	(arm_adjust_cost, arm_coproc_mem_operand_wb)
	(neon_vector_mem_operand, neon_struct_mem_operand)
	(symbol_mentioned_p, label_mentioned_p, )
	(load_multiple_sequence, store_multiple_sequence)
	(arm_select_cc_mode, arm_reload_in_hi, arm_reload_out_hi)
	(mem_ok_for_ldrd_strd, arm_emit_call_insn, output_move_neon)
	(arm_attr_length_move_neon, arm_assemble_integer)
	(arm_emit_coreregs_64bit_shift, arm_valid_symbolic_address_p)
	(extract_base_offset_in_addr, fusion_load_store): Likewise.

2020-11-13  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range.cc: (gimple_ranger::range_of_range_op): Check for
	ADDR_EXPR and call range_of_address.
	(gimple_ranger::range_of_address): Rename from
	range_of_non_trivial_assignment and match vrp_stmt_computes_nonzero.
	* gimple-range.h: (range_of_address): Renamed.
	* range-op.cc: (pointer_table): Add INTEGER_CST handler.

2020-11-13  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/94406
	* tree-ssa-loop-im.c (tree_ssa_lim): Renamed to
	loop_invariant_motion_in_fun, added a parameter to control store
	motion.
	(pass_lim::execute): Adjust call to tree_ssa_lim, now
	loop_invariant_motion_in_fun.
	* tree-ssa-loop-manip.h (loop_invariant_motion_in_fun): Declare.
	* gimple-loop-interchange.cc (pass_linterchange::execute): Call
	loop_invariant_motion_in_fun if any interchange has been done.

2020-11-13  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_phi_compute_hash): Always hash the
	number of predecessors.  Hash the block number also for
	loop header PHIs.
	(expressions_equal_p): Short-cut SSA name compares, remove
	test for NULL operands.
	(vn_phi_eq): Cache number of predecessors, change inlined
	test from expressions_equal_p.

2020-11-13  Iain Sandoe  <iain@sandoe.co.uk>

	* doc/extend.texi: Don't try to line-wrap an @r command.

2020-11-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97812
	* tree-vrp.c (register_edge_assert_for_2): Extend the range
	according to its sign before seeing whether it fits.

2020-11-13  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64.c (tls_symbolic_operand_type)
	(aarch64_load_symref_appropriately, aarch64_mov128_immediate)
	(aarch64_expand_mov_immediate)
	(aarch64_maybe_expand_sve_subreg_move)
	(aarch64_tls_referenced_p, aarch64_cannot_force_const_mem)
	(aarch64_base_register_rtx_p, aarch64_classify_index)
	(aarch64_classify_address, aarch64_symbolic_address_p)
	(aarch64_reinterpret_float_as_int, aarch64_float_const_rtx_p)
	(aarch64_can_const_movi_rtx_p, aarch64_select_cc_mode)
	(aarch64_print_operand, aarch64_label_mentioned_p)
	(aarch64_secondary_reload, aarch64_preferred_reload_class)
	(aarch64_address_cost, aarch64_tls_symbol_p)
	(aarch64_classify_symbol, aarch64_legitimate_pic_operand_p)
	(aarch64_legitimate_constant_p)
	(aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p, aarch64_mov_operand_p)
	(fusion_load_store): Use RTL operands where possible.

2020-11-13  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_expand_setmem): New
	declaration.
	* config/aarch64/aarch64.c (aarch64_gen_store_pair): Add case for
	E_V16QImode.
	(aarch64_set_one_block_and_progress_pointer): New helper for
	aarch64_expand_setmem.
	(aarch64_expand_setmem): Define the expansion for memset.
	* config/aarch64/aarch64.h (CLEAR_RATIO): Tweak to favor
	aarch64_expand_setmem when allowed and profitable.
	(SET_RATIO): Likewise.
	* config/aarch64/aarch64.md: Define pattern for setmemdi.

2020-11-13  Iain Sandoe  <iain@sandoe.co.uk>

	PR objc/90707
	* doc/extend.texi: Document the objc_nullability attribute.

2020-11-13  Iain Sandoe  <iain@sandoe.co.uk>

	PR objc/77404
	* doc/extend.texi: Document the objc_root_class attribute.
	* doc/invoke.texi: Document -Wobjc-root-class.

2020-11-13  Richard Biener  <rguenther@suse.de>

	* cfgexpand.c (gimple_assign_rhs_to_tree): Use
	gimple_assign_rhs_class.
	(expand_gimple_stmt_1): Likewise.
	* gimplify-me.c (gimple_regimplify_operands): Use
	gimple_assign_single_p.
	* ipa-icf-gimple.c (func_checker::compare_gimple_assign):
	Remove redundant compare.
	(func_checker::compare_gimple_cond): Use gimple_cond_code.
	* tree-ssa-tail-merge.c (gimple_equal_p): Likewise.
	* predict.c (predict_loops): Use gimple_assign_rhs_code.

2020-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class vrp_folder): Make visit_stmt, visit_phi,
	and m_vr_values private.
	(vrp_folder::vrp_evaluate_conditional): Remove.
	(vrp_folder::vrp_simplify_stmt_using_ranges): Remove.
	(vrp_folder::fold_predicate_in): Inline
	vrp_evaluate_conditional and vrp_simplify_stmt_using_ranges.
	(vrp_folder::fold_stmt): Same.

2020-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class vrp_prop): Rename vr_values to m_vr_values.
	(vrp_prop::vrp_prop): New.
	(vrp_prop::initialize): Rename vr_values to m_vr_values.
	(vrp_prop::visit_stmt): Same.
	(vrp_prop::visit_phi): Same.
	(vrp_prop::finalize): Same.
	(execute_vrp): Instantiate vrp_vr_values and pass it to folder
	and propagator.

2020-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class vrp_prop): Move entire class...
	(class vrp_folder): ...before here.

2020-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (identify_jump_threads): Refactor to..
	(vrp_jump_threader::vrp_jump_threader): ...here
	(vrp_jump_threader::~vrp_jump_threader): ...and here.
	(vrp_jump_threader::after_dom_children): Rename vr_values to
	m_vr_values.
	(execute_vrp): Use vrp_jump_threader.

2020-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (struct assert_locus): Move.
	(class vrp_insert): Rename to vrp_asserts.
	(vrp_insert::build_assert_expr_for): Move to vrp_asserts.
	(fp_predicate): Same.
	(vrp_insert::dump): Same.
	(vrp_insert::register_new_assert_for): Same.
	(extract_code_and_val_from_cond_with_ops): Move.
	(vrp_insert::finish_register_edge_assert_for): Move to vrp_asserts.
	(maybe_set_nonzero_bits): Move.
	(vrp_insert::find_conditional_asserts): Move to vrp_asserts.
	(stmt_interesting_for_vrp): Move.
	(struct case_info): Move.
	(compare_case_labels): Move.
	(lhs_of_dominating_assert): Move.
	(find_case_label_index): Move.
	(find_case_label_range): Move.
	(class vrp_asserts): New.
	(vrp_asserts::build_assert_expr_for): Rename from vrp_insert.
	(vrp_asserts::dump): Same.
	(vrp_asserts::register_new_assert_for): Same.
	(vrp_asserts::finish_register_edge_assert_for): Same.
	(vrp_asserts::find_conditional_asserts): Same.
	(vrp_asserts::compare_case_labels): Same.
	(vrp_asserts::find_switch_asserts): Same.
	(vrp_asserts::find_assert_locations_in_bb): Same.
	(vrp_asserts::find_assert_locations): Same.
	(vrp_asserts::process_assert_insertions_for): Same.
	(vrp_asserts::compare_assert_loc): Same.
	(vrp_asserts::process_assert_insertions): Same.
	(vrp_asserts::insert_range_assertions): Same.
	(vrp_asserts::all_imm_uses_in_stmt_or_feed_cond): Same.
	(vrp_asserts::remove_range_assertions): Same.
	(class vrp_prop): Move.
	(all_imm_uses_in_stmt_or_feed_cond): Move.
	(vrp_prop::vrp_initialize): Move.
	(class vrp_folder): Move.
	(vrp_folder::fold_predicate_in): Move.
	(vrp_folder::fold_stmt): Move.
	(vrp_prop::initialize): Move.
	(vrp_prop::visit_stmt): Move.
	(enum ssa_prop_result): Move.
	(vrp_prop::visit_phi): Move.
	(vrp_prop::finalize): Move.
	(class vrp_dom_walker): Rename to...
	(class vrp_jump_threader): ...this.
	(vrp_jump_threader::before_dom_children): Rename from
	vrp_dom_walker.
	(simplify_stmt_for_jump_threading): Rename to...
	(vrp_jump_threader::simplify_stmt): ...here.
	(vrp_jump_threader::after_dom_children): Same.
	(identify_jump_threads): Move.
	(vrp_prop::vrp_finalize): Move array bounds setup code to...
	(execute_vrp): ...here.

2020-11-13  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range.h (gimple_range_handler): Use gimple_assign and
	gimple_cond routines to get type and code.
	* range-op.cc (range_op_handler): Check for integral types.

2020-11-12  Nelson Chu  <nelson.chu@sifive.com>

	* configure: Regenerated.
	* configure.ac: If ifunc was supported in the binutils for
	linux toolchain, then set enable_gnu_indirect_function to yes.

2020-11-12  Joseph Myers  <joseph@codesourcery.com>

	* doc/cpp.texi (__has_attribute): Document when scopes are allowed
	for C.
	(__has_c_attribute): New.

2020-11-12  Jakub Jelinek  <jakub@redhat.com>

	* builtin-types.def (BT_FN_PTR_SIZE_SIZE_PTRMODE): New function type.
	* omp-builtins.def (BUILT_IN_GOACC_DECLARE): Move earlier.
	(BUILT_IN_GOMP_ALLOC, BUILT_IN_GOMP_FREE): New builtins.
	* gimplify.c (gimplify_scan_omp_clauses): Force allocator into a
	decl if it is not NULL, INTEGER_CST or decl.
	(gimplify_adjust_omp_clauses): Clear GOVD_EXPLICIT on explicit clauses
	which are being removed.  Remove allocate clauses for variables not seen
	if they are private, firstprivate or linear too.  Call
	omp_notice_variable on the allocator otherwise.
	(gimplify_omp_for): Handle iterator vars mentioned in allocate clauses
	similarly to non-is_gimple_reg iterators.
	* omp-low.c (struct omp_context): Add allocate_map field.
	(delete_omp_context): Delete it.
	(scan_sharing_clauses): Fill it from allocate clauses.  Remove it
	if mentioned also in shared clause.
	(lower_private_allocate): New function.
	(lower_rec_input_clauses): Handle allocate clause for privatized
	variables, except for task/taskloop, C/C++ array reductions for now
	and task/inscan variables.
	(lower_send_shared_vars): Don't consider variables in allocate_map
	as shared.
	* omp-expand.c (expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk): Use expand_omp_build_assign instead of
	gimple_build_assign + gsi_insert_after.
	* builtins.c (builtin_fnspec): Handle BUILTIN_GOMP_ALLOC and
	BUILTIN_GOMP_FREE.
	* tree-ssa-ccp.c (evaluate_stmt): Handle BUILTIN_GOMP_ALLOC.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Handle
	BUILTIN_GOMP_ALLOC.
	(mark_all_reaching_defs_necessary_1): Handle BUILTIN_GOMP_ALLOC
	and BUILTIN_GOMP_FREE.
	(propagate_necessity): Likewise.

2020-11-12  Martin Jambor  <mjambor@suse.cz>

	* cgraphclones.c (cgraph_node::materialize_clone): Check that clone
	info is not NULL before attempting to dump it.

2020-11-12  Martin Jambor  <mjambor@suse.cz>

	* ipa-cp.c (class ipcp_value_base): Change the type of
	local_time_benefit and prop_time_benefit to sreal.  Adjust the
	constructor initializer.
	(ipcp_lattice::print): Dump sreals.
	(struct caller_statistics): Change the type of freq_sum to sreal.
	(gather_caller_stats): Work with sreal freq_sum.
	(incorporate_penalties): Work with sreal evaluation.
	(good_cloning_opportunity_p): Adjusted for sreal sreal time_benefit
	and freq_sum.  Bail out if size_cost is INT_MAX.
	(perform_estimation_of_a_value): Work with sreal time_benefit.  Avoid
	unnecessary capping.
	(estimate_local_effects): Pass sreal time benefit to
	good_cloning_opportunity_p without capping it.  Adjust dumping.
	(safe_add): If there can be overflow, return INT_MAX.
	(propagate_effects): Work with sreal times.
	(get_info_about_necessary_edges): Work with sreal frequencies.
	(decide_about_value): Likewise and with sreal time benefits.

2020-11-12  Marek Polacek  <polacek@redhat.com>

	* system.h (WARN_UNUSED_RESULT): Define for GCC >= 3.4.
	* tree.h (maybe_wrap_with_location): Add WARN_UNUSED_RESULT.

2020-11-12  Jan Hubicka  <jh@suse.cz>

	* fold-const.c (operand_compare::operand_equal_p): Compare field
	offsets in operand_equal_p and OEP_ADDRESS_OF.
	(operand_compare::hash_operand): Update.

2020-11-12  Richard Biener  <rguenther@suse.de>

	* bitmap.c (bitmap_list_view): Restore head->current.
	* tree-ssa-pre.c (pre_expr_DFS): Elide expr_visited bitmap.
	Special-case value expression bitmaps with one element.
	(bitmap_find_leader): Likewise.
	(sorted_array_from_bitmap_set): Elide expr_visited bitmap.

2020-11-12  Jan Hubicka  <jh@suse.cz>

	* attr-fnspec.h: Update topleve comment.
	(attr_fnspec::arg_direct_p): Accept 1...9.
	(attr_fnspec::arg_maybe_written_p): Reject 1...9.
	(attr_fnspec::arg_copied_to_arg_p): New member function.
	* builtins.c (builtin_fnspec): Update fnspec of block copy.
	* tree-ssa-alias.c (attr_fnspec::verify): Update.

2020-11-12  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (bitmap_value_replace_in_set): Return
	whether we have changed anything.
	(do_pre_regular_insertion): Get topologically sorted array
	of expressions from caller.
	(do_pre_partial_partial_insertion): Likewise.
	(insert): Compute topologically sorted arrays of expressions
	here and locally iterate actual insertion.  Iterate only
	when AVAIL_OUT of an already visited block source changed.

2020-11-12  Alex Coplan  <alex.coplan@arm.com>

	PR target/97730
	* config/aarch64/aarch64-sve2.md (@aarch64_sve2_bcax<mode>):
	Change to define_expand, add missing (trivially-predicated) not
	rtx to fix wrong code bug.
	(*aarch64_sve2_bcax<mode>): New.

2020-11-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97806
	* tree-ssa-pre.c (pre_expr_DFS): New overload for visiting
	values, visiting all leaders for a value.  Use a bitmap
	for visited values.
	(sorted_array_from_bitmap_set): Walk over values and adjust.

2020-11-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/97326
	* config/s390/vector.md: Support vector floating point modes in
	vec_cmp.

2020-11-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md: Rename tointvec to TOINTVEC.
	* config/s390/vx-builtins.md: Likewise.

2020-11-12  Jason Merrill  <jason@redhat.com>

	PR debug/97060
	* dwarf2out.c (gen_subprogram_die): It's a declaration
	if DECL_INITIAL isn't set.

2020-11-12  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/97424
	* doc/invoke.texi (Static Analyzer Options): Add
	-Wno-analyzer-shift-count-negative and
	-Wno-analyzer-shift-count-overflow.
	(-Wno-analyzer-shift-count-negative): New.
	(-Wno-analyzer-shift-count-overflow): New.

2020-11-11  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-protos.h (darwin_make_eh_symbol_indirect): New.
	* config/darwin.c (darwin_make_eh_symbol_indirect): New. Use
	Mach-O semantics for personality and ldsa indirections.
	* config/darwin.h (TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT): New.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in: Add TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT hook.
	* dwarf2out.c (dwarf2out_do_cfi_startproc): If the target defines
	a hook for indirecting personality and ldsa references, use that
	otherwise default to ELF semantics.
	* target.def (make_eh_symbol_indirect): New target hook.

2020-11-11  Patrick Palka  <ppalka@redhat.com>

	PR c++/88115
	* common.opt (-fabi-version): Document =15.
	* doc/invoke.texi (C++ Dialect Options): Likewise.

2020-11-11  Marek Polacek  <polacek@redhat.com>

	PR c++/97518
	* tree.c (maybe_wrap_with_location): Don't add a location
	wrapper around an artificial and ignored decl.

2020-11-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97623
	* tree-ssa-pre.c (create_expression_by_pieces): Guard
	NEW_SETS access.
	(insert_into_preds_of_block): Likewise.

2020-11-11  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (pre_expr_DFS): New function.
	(sorted_array_from_bitmap_set): Use it to properly
	topologically sort the expression set.
	(clean): Verify we've cleaned everything we should.

2020-11-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97623
	* params.opt (-param=max-pre-hoist-insert-iterations): Remove
	again.
	* doc/invoke.texi (max-pre-hoist-insert-iterations): Likewise.
	* tree-ssa-pre.c (insert): Move hoist insertion after PRE
	insertion iteration and do not iterate it.

2020-11-11  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (@vcond_mask_<mode><vpred>): Extend
	from SVE_FULL to SVE_ALL.
	(*vcond_mask_<mode><vpred>): Likewise.
	(@aarch64_sel_dup<mode>): Likewise.
	(vcond<SVE_FULL:mode><v_int_equiv>): Extend to...
	(vcond<SVE_ALL:mode><SVE_I:mode>): ...this, but requiring the
	sizes of the container modes to match.
	(vcondu<SVE_FULL:mode><v_int_equiv>): Extend to...
	(vcondu<SVE_ALL:mode><SVE_I:mode>): ...this.
	(vec_cmp<SVE_FULL_I:mode><vpred>): Extend to...
	(vec_cmp<SVE_I:mode><vpred>): ...this.
	(vec_cmpu<SVE_FULL_I:mode><vpred>): Extend to...
	(vec_cmpu<SVE_I:mode><vpred>): ...this.
	(@aarch64_pred_cmp<cmp_op><SVE_FULL_I:mode>): Extend to...
	(@aarch64_pred_cmp<cmp_op><SVE_I:mode>): ...this.
	(*cmp<cmp_op><SVE_FULL_I:mode>_cc): Extend to...
	(*cmp<cmp_op><SVE_I:mode>_cc): ...this.
	(*cmp<cmp_op><SVE_FULL_I:mode>_ptest): Extend to...
	(*cmp<cmp_op><SVE_I:mode>_ptest): ...this.
	(*cmp<cmp_op><SVE_FULL_I:mode>_and): Extend to...
	(*cmp<cmp_op><SVE_I:mode>_and): ...this.

2020-11-11  Richard Sandiford  <richard.sandiford@arm.com>

	* optabs-tree.c (expand_vec_cond_expr_p): Allow the compared values
	and the selected values to have different mode sizes.
	* gimple-isel.cc (gimple_expand_vec_cond_expr): Likewise.

2020-11-11  Hongtao Liu  <hongtao.liu@intel.com>
	    Hongyu Wang  <hongyu.wang@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Detect AVXVNNI.
	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA2_AVXVNNI_SET,
	OPTION_MASK_ISA2_AVXVNNI_UNSET): New.
	(OPTION_MASK_ISA2_AVX2_UNSET): Add AVXVNNI.
	(ix86_hanlde_option): Handle -mavxvnni, unset avxvnni when
	avx2 is disabled.
	* common/config/i386/i386-cpuinfo.h (enum processor_features):
	Add FEATURE_AVXVNNI.
	* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
	for avxvnni.
	* config.gcc: Add avxvnniintrin.h.
	* config/i386/avx512vnnivlintrin.h: Reimplement 128/256 bit non-mask
	intrinsics with macros to support unified interface.
	* config/i386/avxvnniintrin.h: New header file.
	* config/i386/cpuid.h (bit_AVXVNNI): New.
	* config/i386/i386-builtins.c (def_builtin): Handle AVXVNNI mask
	for unified builtin.
	* config/i386/i386-builtin.def (BDESC): Adjust AVX512VNNI
	builtins for AVXVNNI.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AVXVNNI__.
	* config/i386/i386-expand.c (ix86_expand_builtin): Handle bisa
	for AVXVNNI to support unified intrinsic name, since there is no
	dependency between AVX512VNNI and AVXVNNI.
	* config/i386/i386-options.c (isa2_opts): Add -mavxvnni.
	(ix86_valid_target_attribute_inner_p): Handle avxnnni.
	(ix86_option_override_internal): Ditto.
	* config/i386/i386.h (TARGET_AVXVNNI, TARGET_AVXVNNI_P,
	TARGET_AVXVNNI_P, PTA_AVXVNNI): New.
	(PTA_SAPPHIRERAPIDS): Add AVX_VNNI.
	(PTA_ALDERLAKE): Likewise.
	* config/i386/i386.md ("isa"): Add avxvnni, avx512vnnivl.
	("enabled"): Adjust for avxvnni and avx512vnnivl.
	* config/i386/i386.opt: Add option -mavxvnni.
	* config/i386/immintrin.h: Include avxvnniintrin.h.
	* config/i386/sse.md (vpdpbusd_<mode>): Adjust for AVXVNNI.
	(vpdpbusds_<mode>): Likewise.
	(vpdpwssd_<mode>): Likewise.
	(vpdpwssds_<mode>): Likewise.
	(vpdpbusd_v16si): New.
	(vpdpbusds_v16si): Likewise.
	(vpdpwssd_v16si): Likewise.
	(vpdpwssds_v16si): Likewise.
	* doc/invoke.texi: Document -mavxvnni.
	* doc/extend.texi: Document avxvnni.
	* doc/sourcebuild.texi: Document target avxvnni.

2020-11-11  Martin Liska  <mliska@suse.cz>

	* tree.c (copy_node): Fix spelling.

2020-11-11  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (phi_translate_set): Do not sort the
	expression set topologically.

2020-11-11  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.cc (irange::set): Early exit on VR_VARYING.

2020-11-11  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for arithmetic operation intrinsics.

2020-11-11  Strager Neds  <strager.nds@gmail.com>

	* cgraph.h (symtab_node::set_section_for_node): Declare new
	overload.
	(symtab_node::set_section_from_string): Rename from set_section.
	(symtab_node::set_section_from_node): Declare.
	* symtab.c (symtab_node::set_section_for_node): Define new
	overload.
	(symtab_node::set_section_from_string): Rename from set_section.
	(symtab_node::set_section_from_node): Define.
	(symtab_node::set_section): Call renamed set_section_from_string.
	(symtab_node::set_section): Call new set_section_from_node.

2020-11-11  Strager Neds  <strager.nds@gmail.com>

	* symtab.c (symtab_node::set_section_for_node): Extract reference
	counting logic into ...
	(retain_section_hash_entry): ... here (new function) and ...
	(release_section_hash_entry): ... here (new function).

2020-11-11  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386.h (PTA_MOVDIRI, PTA_MOVDIR64B,
	PTA_AMX_TILE, PTA_AMX_INT8, PTA_AMX_BF16, PTA_HRESET):
	Formatting.

2020-11-11  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.h (HAVE_TF): Use opaque value when
	GENERATOR_FILE is defined.

2020-11-10  Strager Neds  <strager.nds@gmail.com>

	* cgraph.h (symtab_node::get_section): Constify.
	(symtab_node::set_section): Declare new overload.
	* symtab.c (symtab_node::set_section): Define new overload.
	(symtab_node::copy_visibility_from): Use new overload of
	symtab_node::set_section.
	(symtab_node::resolve_alias): Same.
	* tree.h (set_decl_section_name): Declare new overload.
	* tree.c (set_decl_section_name): Define new overload.
	* tree-emutls.c (get_emutls_init_templ_addr): Same.
	* cgraphclones.c (cgraph_node::create_virtual_clone): Use new
	overload of symtab_node::set_section.
	(cgraph_node::create_version_clone_with_body): Same.
	* trans-mem.c (ipa_tm_create_version): Same.

2020-11-10  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.cc (irange::set): Early exit for poly ints.

2020-11-10  Tobias Burnus  <tobias@codesourcery.com>

	* gimplify.c (gimplify_scan_omp_clauses, gimplify_omp_loop): Use 'do'
	instead of 'for' in error messages for Fortran.
	* omp-low.c (check_omp_nesting_restrictions): Likewise

2020-11-10  Matthew Malcomson  <matthew.malcomson@arm.com>

	* opts.c (control_options_for_live_patching): Reform 'is incompatible
	with' error messages to use a standard message with differing format
	arguments.
	(finish_options): Likewise.

2020-11-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97769
	* tree-vect-data-refs.c (vect_update_misalignment_for_peel):
	Remove assert.

2020-11-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97780
	* tree-ssa-pre.c (fini_pre): Deal with added basic blocks
	when freeing PHI_TRANS_TABLE.

2020-11-10  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for tbl/tbx intrinsics.

2020-11-10  Chung-Lin Tang  <cltang@codesourcery.com>

	* gimplify.c (is_or_contains_p): New static helper function.
	(omp_target_reorder_clauses): New function.
	(gimplify_scan_omp_clauses): Add use of omp_target_reorder_clauses to
	reorder clause list according to OpenMP 5.0 rules. Add handling of
	GOMP_MAP_ATTACH_DETACH for OpenMP cases.
	* omp-low.c (is_omp_target): New static helper function.
	(scan_sharing_clauses): Add scan phase handling of GOMP_MAP_ATTACH/DETACH
	for OpenMP cases.
	(lower_omp_target): Add lowering handling of GOMP_MAP_ATTACH/DETACH for
	OpenMP cases.

2020-11-10  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390-modes.def (FPRX2): New mode.
	* config/s390/s390-protos.h (s390_fma_allowed_p): New function.
	* config/s390/s390.c (s390_fma_allowed_p): Likewise.
	(s390_build_signbit_mask): Support 128-bit masks.
	(print_operand): Support printing the second word of a TFmode
	operand as vector register.
	(constant_modes): Add FPRX2mode.
	(s390_class_max_nregs): Return 1 for TFmode on z14+.
	(s390_is_fpr128): New function.
	(s390_is_vr128): Likewise.
	(s390_can_change_mode_class): Use s390_is_fpr128 and
	s390_is_vr128 in order to determine whether mode refers to a FPR
	pair or to a VR.
	(s390_emit_compare): Force TFmode operands into registers on
	z14+.
	* config/s390/s390.h (HAVE_TF): New macro.
	(EXPAND_MOVTF): New macro.
	(EXPAND_TF): Likewise.
	* config/s390/s390.md (PFPO_OP_TYPE_FPRX2): PFPO_OP_TYPE_TF
	alias.
	(ALL): Add FPRX2.
	(FP_ALL): Add FPRX2 for z14+, restrict TFmode to z13-.
	(FP): Likewise.
	(FP_ANYTF): New mode iterator.
	(BFP): Add FPRX2 for z14+, restrict TFmode to z13-.
	(TD_TF): Likewise.
	(xde): Add FPRX2.
	(nBFP): Likewise.
	(nDFP): Likewise.
	(DSF): Likewise.
	(DFDI): Likewise.
	(SFSI): Likewise.
	(DF): Likewise.
	(SF): Likewise.
	(fT0): Likewise.
	(bt): Likewise.
	(_d): Likewise.
	(HALF_TMODE): Likewise.
	(tf_fpr): New mode_attr.
	(type): New mode_attr.
	(*cmp<mode>_ccz_0): Use type instead of mode with fsimp.
	(*cmp<mode>_ccs_0_fastmath): Likewise.
	(*cmptf_ccs): New pattern for wfcxb.
	(*cmptf_ccsfps): New pattern for wfkxb.
	(mov<mode>): Rename to mov<mode><tf_fpr>.
	(signbit<mode>2): Rename to signbit<mode>2<tf_fpr>.
	(isinf<mode>2): Renamed to isinf<mode>2<tf_fpr>.
	(*TDC_insn_<mode>): Use type instead of mode with fsimp.
	(fixuns_trunc<FP:mode><GPR:mode>2): Rename to
	fixuns_trunc<FP:mode><GPR:mode>2<FP:tf_fpr>.
	(fix_trunctf<mode>2): Rename to fix_trunctf<mode>2_fpr.
	(floatdi<mode>2): Rename to floatdi<mode>2<tf_fpr>, use type
	instead of mode with itof.
	(floatsi<mode>2): Rename to floatsi<mode>2<tf_fpr>, use type
	instead of mode with itof.
	(*floatuns<GPR:mode><FP:mode>2): Use type instead of mode for
	itof.
	(floatuns<GPR:mode><FP:mode>2): Rename to
	floatuns<GPR:mode><FP:mode>2<tf_fpr>.
	(trunctf<mode>2): Rename to trunctf<mode>2_fpr, use type instead
	of mode with fsimp.
	(extend<DSF:mode><BFP:mode>2): Rename to
	extend<DSF:mode><BFP:mode>2<BFP:tf_fpr>.
	(<FPINT:fpint_name><BFP:mode>2): Rename to
	<FPINT:fpint_name><BFP:mode>2<BFP:tf_fpr>, use type instead of
	mode with fsimp.
	(rint<BFP:mode>2): Rename to rint<BFP:mode>2<BFP:tf_fpr>, use
	type instead of mode with fsimp.
	(<FPINT:fpint_name><DFP:mode>2): Use type instead of mode for
	fsimp.
	(rint<DFP:mode>2): Likewise.
	(trunc<BFP:mode><DFP_ALL:mode>2): Rename to
	trunc<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
	(trunc<DFP_ALL:mode><BFP:mode>2): Rename to
	trunc<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
	(extend<BFP:mode><DFP_ALL:mode>2): Rename to
	extend<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
	(extend<DFP_ALL:mode><BFP:mode>2): Rename to
	extend<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
	(add<mode>3): Rename to add<mode>3<tf_fpr>, use type instead of
	mode with fsimp.
	(*add<mode>3_cc): Use type instead of mode with fsimp.
	(*add<mode>3_cconly): Likewise.
	(sub<mode>3): Rename to sub<mode>3<tf_fpr>, use type instead of
	mode with fsimp.
	(*sub<mode>3_cc): Use type instead of mode with fsimp.
	(*sub<mode>3_cconly): Likewise.
	(mul<mode>3): Rename to mul<mode>3<tf_fpr>, use type instead of
	mode with fsimp.
	(fma<mode>4): Restrict using s390_fma_allowed_p.
	(fms<mode>4): Restrict using s390_fma_allowed_p.
	(div<mode>3): Rename to div<mode>3<tf_fpr>, use type instead of
	mode with fdiv.
	(neg<mode>2): Rename to neg<mode>2<tf_fpr>.
	(*neg<mode>2_cc): Use type instead of mode with fsimp.
	(*neg<mode>2_cconly): Likewise.
	(*neg<mode>2_nocc): Likewise.
	(*neg<mode>2): Likeiwse.
	(abs<mode>2): Rename to abs<mode>2<tf_fpr>, use type instead of
	mode with fdiv.
	(*abs<mode>2_cc): Use type instead of mode with fsimp.
	(*abs<mode>2_cconly): Likewise.
	(*abs<mode>2_nocc): Likewise.
	(*abs<mode>2): Likewise.
	(*negabs<mode>2_cc): Likewise.
	(*negabs<mode>2_cconly): Likewise.
	(*negabs<mode>2_nocc): Likewise.
	(*negabs<mode>2): Likewise.
	(sqrt<mode>2): Rename to sqrt<mode>2<tf_fpr>, use type instead
	of mode with fsqrt.
	(cbranch<mode>4): Use FP_ANYTF instead of FP.
	(copysign<mode>3): Rename to copysign<mode>3<tf_fpr>, use type
	instead of mode with fsimp.
	* config/s390/s390.opt (flag_vx_long_double_fma): New
	undocumented option.
	* config/s390/vector.md (V_HW): Add TF for z14+.
	(V_HW2): Likewise.
	(VFT): Likewise.
	(VF_HW): Likewise.
	(V_128): Likewise.
	(tf_vr): New mode_attr.
	(tointvec): Add TF.
	(mov<mode>): Rename to mov<mode><tf_vr>.
	(movetf): New dispatcher.
	(*vec_tf_to_v1tf): Rename to *vec_tf_to_v1tf_fpr, restrict to
	z13-.
	(*vec_tf_to_v1tf_vr): New pattern for z14+.
	(*fprx2_to_tf): Likewise.
	(*mov_tf_to_fprx2_0): Likewise.
	(*mov_tf_to_fprx2_1): Likewise.
	(add<mode>3): Rename to add<mode>3<tf_vr>.
	(addtf3): New dispatcher.
	(sub<mode>3): Rename to sub<mode>3<tf_vr>.
	(subtf3): New dispatcher.
	(mul<mode>3): Rename to mul<mode>3<tf_vr>.
	(multf3): New dispatcher.
	(div<mode>3): Rename to div<mode>3<tf_vr>.
	(divtf3): New dispatcher.
	(sqrt<mode>2): Rename to sqrt<mode>2<tf_vr>.
	(sqrttf2): New dispatcher.
	(fma<mode>4): Restrict using s390_fma_allowed_p.
	(fms<mode>4): Likewise.
	(neg_fma<mode>4): Likewise.
	(neg_fms<mode>4): Likewise.
	(neg<mode>2): Rename to neg<mode>2<tf_vr>.
	(negtf2): New dispatcher.
	(abs<mode>2): Rename to abs<mode>2<tf_vr>.
	(abstf2): New dispatcher.
	(float<mode>tf2_vr): New forwarder.
	(float<mode>tf2): New dispatcher.
	(floatuns<mode>tf2_vr): New forwarder.
	(floatuns<mode>tf2): New dispatcher.
	(fix_trunctf<mode>2_vr): New forwarder.
	(fix_trunctf<mode>2): New dispatcher.
	(fixuns_trunctf<mode>2_vr): New forwarder.
	(fixuns_trunctf<mode>2): New dispatcher.
	(<FPINT:fpint_name><VF_HW:mode>2<VF_HW:tf_vr>): New pattern.
	(<FPINT:fpint_name>tf2): New forwarder.
	(rint<mode>2<tf_vr>): New pattern.
	(rinttf2): New forwarder.
	(*trunctfdf2_vr): New pattern.
	(trunctfdf2_vr): New forwarder.
	(trunctfdf2): New dispatcher.
	(trunctfsf2_vr): New forwarder.
	(trunctfsf2): New dispatcher.
	(extenddftf2_vr): New pattern.
	(extenddftf2): New dispatcher.
	(extendsftf2_vr): New forwarder.
	(extendsftf2): New dispatcher.
	(signbittf2_vr): New forwarder.
	(signbittf2): New dispatchers.
	(isinftf2_vr): New forwarder.
	(isinftf2): New dispatcher.
	* config/s390/vx-builtins.md (*vftci<mode>_cconly): Use VF_HW
	instead of VECF_HW, add missing constraint, add vw support.
	(vftci<mode>_intcconly): Use VF_HW instead of VECF_HW.
	(*vftci<mode>): Rename to vftci<mode>, use VF_HW instead of
	VECF_HW, and vw support.
	(vftci<mode>_intcc): Use VF_HW instead of VECF_HW.

2020-11-10  Eric Botcazou  <ebotcazou@adacore.com>

	* range-op.cc (operator_logical_not::fold_range): Tidy up.
	(operator_logical_not::op1_range): Call above method.
	(operator_bitwise_not::fold_range): If the type is compatible
	with boolean, call op_logical_not.fold_range.
	(operator_bitwise_not::op1_range): If the type is compatible
	with boolean, call op_logical_not.op1_range.

2020-11-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (pre_expr_d::value_id): Add.
	(constant_value_expressions): Turn into an array of pre_expr.
	(get_or_alloc_expr_for_nary): New function.
	(get_or_alloc_expr_for_reference): Likewise.
	(add_to_value): For constant values only ever add a single
	CONSTANT.
	(get_expr_value_id): Return the new value_id member.
	(vn_valnum_from_value_id): Split out and simplify constant
	value id handling.
	(get_or_alloc_expr_for_constant): Set the value_id member.
	(phi_translate_1): Use get_or_alloc_expr_for_*.
	(compute_avail): Likewise.
	(bitmap_find_leader): Simplify constant value id handling.

2020-11-10  Alex Coplan  <alex.coplan@arm.com>

	* doc/md.texi (Modifiers): Fix grammar in description of
	earlyclobber constraint modifier.

2020-11-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97764
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): For
	little-endian stores with negative pd.offset, subtract
	BITS_PER_UNIT - amnt from size if amnt is non-zero.

2020-11-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97760
	* tree-vect-loop.c (check_reduction_path): Reject
	reduction paths we do not handle in epilogue generation.

2020-11-10  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97767
	* value-range.cc (dump_bound_with_infinite_markers): Use
	wi::min_value and wi::max_value.
	(range_tests_strict_enum): New.
	(range_tests): Call range_tests_strict_enum.
	* value-range.h (irange::varying_p): Use wi::min_value
	and wi::max_value.
	(irange::set_varying): Same.
	(irange::normalize_min_max): Remove comment.

2020-11-10  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97567
	* gimple-range-gori.cc: (gori_compute::logical_combine): False
	OR operations should intersect the 2 results.
	(gori_compute::compute_logical_operands_in_chain): If def chains
	are outside the current basic block, don't follow them.

2020-11-09  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_split_move): Recognize vadd2 instructions.
	* config/arc/arc.md (movdi_insn): Update pattern to use vadd2
	instructions.
	(movdf_insn): Likewise.
	(maddhisi4): New pattern.
	(umaddhisi4): Likewise.
	* config/arc/simdext.md (mov<mode>_int): Update pattern to use
	vadd2.
	(sdot_prodv4hi): New pattern.
	(udot_prodv4hi): Likewise.
	(arc_vec_<V_US>mac_hi_v4hi): Update/renamed to
	arc_vec_<V_US>mac_v2hiv2si.
	(arc_vec_<V_US>mac_v2hiv2si_zero): New pattern.
	* config/arc/constraints.md (Ral): Accumulator register
	constraint.

2020-11-09  Aldy Hernandez  <aldyh@redhat.com>

	* function-tests.c (test_ranges): Call range_op_tests.
	* range-op.cc (build_range3): Move to value-range.cc.
	(range3_tests): Same.
	(int_range_max_tests): Same.
	(multi_precision_range_tests): Same.
	(range_tests): Same.
	(operator_tests): Split up...
	(range_op_tests): Split up...
	(range_op_cast_tests): ...here.
	(range_op_lshift_tests): ...here.
	(range_op_rshift_tests): ...here.
	(range_op_bitwise_and_tests): ...here.
	* selftest.h (range_op_tests): New.
	* value-range.cc (build_range3): New.
	(range_tests_irange3): New.
	(range_tests_int_range_max): New.
	(range_tests_legacy): New.
	(range_tests_misc): New.
	(range_tests): New.

2020-11-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97761
	* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Remove
	premature end of DFS walk.

2020-11-09  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.cc (irange::swap_out_of_order_endpoints): Rewrite
	into static function.
	(irange::set): Cleanup redundant manipulations.
	* value-range.h (irange::normalize_min_max): Modify object
	in-place instead of modifying arguments.

2020-11-09  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_expand_fcmla_builtin): Do not alter force_reg returned
	register.

2020-11-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97753
	* tree-vect-loop.c (vectorizable_induction): Fill vec_steps
	when CSEing inside the group.

2020-11-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97746
	* tree-vect-patterns.c (vect_determine_precisions): First walk PHIs.

2020-11-09  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (get_representative_for): CSE VN_INFO calls.
	(create_expression_by_pieces): Likewise.
	(insert_into_preds_of_block): Likewsie.
	(do_pre_regular_insertion): Likewsie.
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_insert):
	Likewise.
	(eliminate_dom_walker::eliminate_stmt): Likewise.

2020-11-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97765
	* tree-ssa-pre.c (bb_bitmap_sets::phi_translate_table): Add.
	(PHI_TRANS_TABLE): New macro.
	(phi_translate_table): Remove.
	(expr_pred_trans_d::pred): Remove.
	(expr_pred_trans_d::hash): Simplify.
	(expr_pred_trans_d::equal): Likewise.
	(phi_trans_add): Adjust.
	(phi_translate): Likewise.  Remove hash-table expansion
	detection and optimization.
	(phi_translate_set): Allocate PHI_TRANS_TABLE here.
	(init_pre): Adjsust.
	(fini_pre): Free PHI_TRANS_TABLE.

2020-11-09  Lili Cui  <lili.cui@intel.com>

	PR target/97685
	* config/i386/i386.h:
	(PTA_BROADWELL): Delete PTA_PRFCHW.
	(PTA_SILVERMONT): Add PTA_PRFCHW.
	(PTA_KNL): Add PTA_PREFETCHWT1.
	(PTA_TREMONT): Add PTA_MOVDIRI, PTA_MOVDIR64B, PTA_CLDEMOTE and PTA_WAITPKG.
	* doc/invoke.texi: Delete PREFETCHW for broadwell, skylake, knl, knm,
	skylake-avx512, cannonlake, icelake-client, icelake-server, cascadelake,
	cooperlake, tigerlake and sapphirerapids.
	Add PREFETCHW for silvermont, goldmont, goldmont-plus and tremont.
	Add XSAVEC and XSAVES for goldmont, goldmont-plus and tremont.
	Add MOVDIRI, MOVDIR64B, CLDEMOTE and WAITPKG for tremont.
	Add KEYLOCKER and HREST for alderlake.
	Add AMX-BF16, AMX-TILE, AMX-INT8 and UINTR for sapphirerapids.
	Add KEYLOCKER for tigerlake.

2020-11-09  Kewen Lin  <linkw@linux.ibm.com>

	PR rtl-optimization/97705
	* ira.c (ira): Refactor some regstat free/init/compute invocation
	into lambda function regstat_recompute_for_max_regno, and call it
	when max_regno increases as remove_scratches succeeds.

2020-11-08  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000.c (rs6000_mangle_decl_assembler_name): Change
	DECL_IS_BUILTIN -> DECL_IS_UNDECLARED_BUILTIN.

2020-11-07  Martin Uecker  <muecker@gwdg.de>

	* doc/extend.texi: Document mixing labels and code.
	* doc/invoke.texi: Likewise.

2020-11-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (@tablejump<mode>_normal): Don't abuse
	operands[].
	(@tablejump<mode>_nospec): Ditto.

2020-11-06  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/rs6000.h (BIGGEST_ALIGNMENT): Revert previous commit
	so as not to break the ABI.
	* config/rs6000/rs6000-call.c (rs6000_init_builtins): Set the ABI
	mandated alignment for __vector_pair and __vector_quad types.

2020-11-06  Jeff Law  <law@torsion.usersys.redhat.com>

	PR target/91489
	* config/i386/i386.md (simple_return): Also check
	for ms_hook_prologue function attribute.
	* config/i386/i386.c (ix86_can_use_return_insn_p):
	Also check for ms_hook_prologue function attribute.
	* config/i386/i386-protos.h (ix86_function_ms_hook_prologue): Declare.

2020-11-06  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/96933
	* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
	TARGET_POWERPC64 instead of TARGET_64BIT.

2020-11-06  Joseph Myers  <joseph@codesourcery.com>

	* builtins.def (BUILT_IN_NANSD32, BUILT_IN_NANSD64)
	(BUILT_IN_NANSD128): New built-in functions.
	* fold-const-call.c (fold_const_call): Handle the new built-in
	functions.
	* doc/extend.texi (__builtin_nansd32, __builtin_nansd64)
	(__builtin_nansd128): Document.
	* doc/sourcebuild.texi (Effective-Target Keywords): Document
	fenv_exceptions_dfp.

2020-11-06  Bin Cheng  <bin.cheng@linux.alibaba.com>

	* tree-ssa-uninit.c (find_var_cmp_const): New function.
	(use_pred_not_overlap_with_undef_path_pred): Call above.

2020-11-06  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c: Allow for Darwin20 to correspond to macOS 11.
	* config/darwin-driver.c: Likewise.

2020-11-06  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (expr_pred_trans_d): Modify so elements
	are embedded rather than allocated.  Remove hashval member,
	make all members integers.
	(phi_trans_add): Adjust accordingly.
	(phi_translate): Likewise.  Deal with re-allocation
	of the table.

2020-11-06  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97737
	PR tree-optimization/97741
	* gimple-range.cc: (gimple_ranger::range_of_stmt): Intersect newly
	calculated ranges with the existing known global range.

2020-11-06  Darius Galis  <darius.galis@cyberthorstudios.com>

	* config/rx/rx.md (CTRLREG_PC): Add.
	* config/rx/rx.c (CTRLREG_PC): Add
	(rx_expand_builtin_mvtc): Add warning: PC register cannot
	be used as dest.

2020-11-06  Nathan Sidwell  <nathan@acm.org>

	* tree.h (DECL_IS_BUILTIN): Rename to ...
	(DECL_IS_UNDECLARED_BUILTIN): ... here.  No need to use SOURCE_LOCUS.
	* calls.c (maybe_warn_alloc_args_overflow): Adjust for rename.
	* cfgexpand.c (pass_expand::execute): Likewise.
	* dwarf2out.c (base_type_die, is_naming_typedef_decl): Likewise.
	* godump.c (go_decl, go_type_decl): Likewise.
	* print-tree.c (print_decl_identifier): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Likewise.
	* xcoffout.c (xcoff_assign_fundamental_type_number): Likewise.

2020-11-06  David Candler  <david.candler@arm.com>

	* config/aarch64/aarch64-builtins.c
	(TYPES_SHIFT2IMM): Add define.
	(TYPES_SHIFT2IMM_UUSS): Add define.
	(TYPES_USHIFT2IMM): Add define.
	* config/aarch64/aarch64-simd.md
	(aarch64_<sur>q<r>shr<u>n2_n<mode>): Add new insn for upper saturating shift right.
	* config/aarch64/aarch64-simd-builtins.def: Add intrinsics.
	* config/aarch64/arm_neon.h:
	(vqrshrn_high_n_s16): Expand using intrinsic rather than inline asm.
	(vqrshrn_high_n_s32): Likewise.
	(vqrshrn_high_n_s64): Likewise.
	(vqrshrn_high_n_u16): Likewise.
	(vqrshrn_high_n_u32): Likewise.
	(vqrshrn_high_n_u64): Likewise.
	(vqrshrun_high_n_s16): Likewise.
	(vqrshrun_high_n_s32): Likewise.
	(vqrshrun_high_n_s64): Likewise.
	(vqshrn_high_n_s16): Likewise.
	(vqshrn_high_n_s32): Likewise.
	(vqshrn_high_n_s64): Likewise.
	(vqshrn_high_n_u16): Likewise.
	(vqshrn_high_n_u32): Likewise.
	(vqshrn_high_n_u64): Likewise.
	(vqshrun_high_n_s16): Likewise.
	(vqshrun_high_n_s32): Likewise.
	(vqshrun_high_n_s64): Likewise.

2020-11-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-modes.def (VNx2BF, VNx4BF): Adjust nunits
	and alignment based on the current VG.
	* config/aarch64/iterators.md (SVE_ALL, SVE_24, SVE_2, SVE_4): Add
	partial SVE BF modes.
	(UNSPEC_REVBHW): New unspec.
	(Vetype, Vesize, Vctype, VEL, Vel, vwcore, V_INT_CONTAINER)
	(v_int_container, VPRED, vpred): Handle partial SVE BF modes.
	(container_bits, Vcwtype): New mode attributes.
	* config/aarch64/aarch64-sve.md
	(@aarch64_sve_revbhw_<SVE_ALL:mode><PRED_HSD:mode>): New pattern.
	(@aarch64_sve_dup_lane<mode>): Extended from SVE_FULL to SVE_ALL.
	(@aarch64_sve_rev<mode>, @aarch64_sve_<perm_insn><mode>): Likewise.
	(@aarch64_sve_ext<mode>): Likewise.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
	E_VNx2BFmode and E_VNx4BFmode.
	(aarch64_evpc_rev_local): Base the analysis on the container size
	instead of the element size.  Use the new aarch64_sve_revbhw
	patterns for SVE.
	(aarch64_evpc_dup): Handle partial SVE data modes.  Use the
	container size instead of the element size when applying the
	SVE immediate limit.  Fix a previously incorrect bounds check.
	(aarch64_expand_vec_perm_const_1): Handle partial SVE data modes.

2020-11-06  Martin Liska  <mliska@suse.cz>

	* common.opt: Add new -fbit-tests option.
	* doc/invoke.texi: Document the option.
	* tree-switch-conversion.c (bit_test_cluster::find_bit_tests):
	Use the option.
	* tree-switch-conversion.h (is_enabled): New function.

2020-11-06  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (get_max_constant_value_id): Declare.
	(get_next_constant_value_id): Likewise.
	(value_id_constant_p): Inline and simplify.
	* tree-ssa-sccvn.c (constant_value_ids): Remove.
	(next_constant_value_id): Add.
	(get_or_alloc_constant_value_id): Adjust.
	(value_id_constant_p): Remove definition.
	(get_max_constant_value_id): Define.
	(get_next_value_id): Add assert for overflow.
	(get_next_constant_value_id): Define.
	(run_rpo_vn): Adjust.
	(free_rpo_vn): Likewise.
	(do_rpo_vn): Initialize next_constant_value_id.
	* tree-ssa-pre.c (constant_value_expressions): New.
	(add_to_value): Split into constant/non-constant value
	handling.  Avoid exact re-allocation.
	(vn_valnum_from_value_id): Adjust.
	(phi_translate_1): Remove spurious exact re-allocation.
	(bitmap_find_leader): Adjust.  Make sure we return
	a CONSTANT value for a constant value id.
	(do_pre_regular_insertion): Use 2 auto-elements for avail.
	(do_pre_partial_partial_insertion): Likewise.
	(init_pre): Allocate constant_value_expressions.
	(fini_pre): Release constant_value_expressions.

2020-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97706
	* tree-vect-patterns.c (possible_vector_mask_operation_p):
	PHIs are possible mask operations.
	(vect_determine_mask_precision): Handle PHIs.
	(vect_determine_precisions): Walk PHIs in BB analysis.

2020-11-06  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp): Pass down the
	SLP graph entry kind.
	(vect_analyze_slp_instance): Simplify.
	(vect_build_slp_instance): Adjust.
	(vect_slp_check_for_constructors): Perform more
	eligibility checks here.

2020-11-06  Jan Hubicka  <jh@suse.cz>

	* ipa-ref.h (enum ipa_ref_use): Remove GTY marker.
	(struct ipa_ref): Remove GTY marker; reorder for better packing.
	(struct ipa_ref_list): Remove GTY marker; turn references
	nad referring to va_heap, vl_ptr vectors; update accesors.
	* cgraph.h (symtab_node::iterate_reference): Update.
	* ipa-ref.c (ipa_ref::remove_reference): Update.
	* symtab.c (symtab_node::create_reference): Update.
	(symtab_node::remove_all_references): Update.
	(symtab_node::resolve_alias): Update.

2020-11-06  Jakub Jelinek  <jakub@redhat.com>

	* ipa-modref-tree.h: Fix comment typos.
	* ipa-modref.c: Likewise.

2020-11-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_option_override_internal): Remove
	override of inline params.

2020-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97706
	* tree-vect-patterns.c (vect_determine_mask_precision):
	Remove worklist operation.
	(vect_determine_stmt_precisions): Do not call
	vect_determine_mask_precision here.
	(vect_determine_precisions): Compute mask precision
	in a forward walk.

2020-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97732
	* tree-vect-loop.c (vectorizable_induction): Convert the
	init elements to the vector component type.
	* gimple-fold.c (gimple_build_vector): Use CONSTANT_CLASS_P
	rather than TREE_CONSTANT to determine if elements are
	eligible for VECTOR_CSTs.

2020-11-06  Jan Hubicka  <jh@suse.cz>

	* attr-fnspec.h (attr_fnspec::get_str): New accessor
	* ipa-fnsummary.c (read_ipa_call_summary): Store also parm info
	for builtins.
	* ipa-modref.c (class fnspec_summary): New type.
	(class fnspec_summaries_t): New type.
	(modref_summary::modref_summary): Initialize writes_errno.
	(struct modref_summary_lto): Add writes_errno.
	(modref_summary_lto::modref_summary_lto): Initialize writes_errno.
	(modref_summary::dump): Check for NULL pointers.
	(modref_summary_lto::dump): Dump writes_errno.
	(collapse_loads): Move up in source file.
	(collapse_stores): New function.
	(process_fnspec): Handle also internal calls.
	(analyze_call): Likewise.
	(analyze_stmt): Store fnspec string if needed.
	(analyze_function): Initialize fnspec_sumarries.
	(modref_summaries_lto::duplicate): Copy writes_errno.
	(modref_write): Store writes_errno and fnspec summaries.
	(read_section): Read writes_errno and fnspec summaries.
	(modref_read): Initialize fnspec summaries.
	(update_signature): Fix formating.
	(compute_parm_map): Return true if sucessful.
	(get_parm_type): New function.
	(get_access_for_fnspec): New function.
	(propagate_unknown_call): New function.
	(modref_propagate_in_scc): Use it.
	(pass_ipa_modref::execute): Delete fnspec_summaries.
	(ipa_modref_c_finalize): Delete fnspec_summaries.
	* ipa-prop.c: Include attr-fnspec.h.
	(ipa_compute_jump_functions_for_bb):  Also compute jump functions
	for functions with fnspecs.
	(ipa_read_edge_info): Read jump functions for builtins.

2020-11-06  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.h (class size_time_entry): Do not GTY annotate.
	(class ipa_fnsummary): Turn size_time_table to auto_vec and
	call_size_time_table to effecient vec; update constructors.
	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Update.
	(ipa_fn_summary::~ipa_fn_summary): Update.
	(ipa_fn_summary_t::duplicate): Update.
	(ipa_dump_fn_summary): Update.
	(set_switch_stmt_execution_predicate): Update.
	(analyze_function_body): Update.
	(estimate_calls_size_and_time): Update.
	(ipa_call_context::estimate_size_and_time): Update.
	(ipa_merge_fn_summary_after_inlining): Update.
	(ipa_update_overall_fn_summary): Update.
	(inline_read_section): Update.
	(ipa_fn_summary_write): Update.

2020-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97733
	* tree-vect-slp.c (vect_analyze_slp_instance): If less
	than two reductions were relevant or live do nothing.

2020-11-06  Jeff Law  <law@redhat.com>

	PR tree-optimization/97223
	* match.pd (overflow detection and optimization): Handle conversions.

2020-11-06  Eugene Rozenfeld  <erozen@microsoft.com>

	* match.pd (x >> x): New pattern.

2020-11-06  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_implied_info):
	Add static and const.
	(riscv_subset_list::handle_implied_ext): Add const due to
	riscv_implied_info changed to const.

2020-11-06  Kito Cheng  <kito.cheng@sifive.com>

	PR target/96307
	* toplev.c (process_options): Remove param_asan_stack checking for kasan
	option checking.

2020-11-05  Marek Polacek  <polacek@redhat.com>

	PR c++/97675
	* doc/invoke.texi: Document -Wexceptions.

2020-11-05  Marek Polacek  <polacek@redhat.com>

	PR c++/25814
	* doc/invoke.texi: Document -Wvexing-parse.

2020-11-05  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97725
	* range-op.cc (operator_equal::fold_range): Use new tmp value.
	(operator_not_equal::fold_range): Ditto.
	* value-query.cc (range_query::value_of_expr): Use int_range_max
	not a value_range.
	(range_query::value_on_edge): Ditto.
	(range_query::value_of_stmt): Ditto.

2020-11-05  Olivier Hainque  <hainque@adacore.com>

	* config/aarch64/aarch64-vxworks.h (TARGET_OS_USES_R18):
	Remove definition.
	(STATIC_CHAIN_REGNUM): Redefine to 9.

2020-11-05  Olivier Hainque  <hainque@adacore.com>

	* config/aarch64/aarch64.md: Define PROBE_STACK_FIRST_REGNUM
	and PROBE_STACK_SECOND_REGNUM constants, designating r10/r11.
	Replacements for the PROBE_STACK_FIRST/SECOND_REG constants in
	aarch64.c.
	* config/aarch64/aarch64.c (PROBE_STACK_FIRST_REG): Remove.
	(PROBE_STACK_SECOND_REG): Remove.
	(aarch64_emit_probe_stack_range): Adjust to the _REG -> _REGNUM
	suffix update for PROBE_STACK register numbers.

2020-11-05  Jan Hubicka  <jh@suse.cz>

	* gimple.c (gimple_call_fnspec): Handle C++ new and delete.
	* gimple.h (gimple_call_from_new_or_delete): Constify parameter.

2020-11-05  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97721
	* gimple-range.cc (get_tree_range): Drop overflow from constants.

2020-11-05  David Malcolm  <dmalcolm@redhat.com>

	* tree-diagnostic-path.cc (struct path_summary::event_range): Move
	out of path_summary to...
	(struct event_range): ...here.
	(class path_summary): Convert to...
	(struct path_summary): ...this.
	(path_summary::m_ranges): Drop "private".
	(path_summary::print): Convert to...
	(print_path_summary_as_text): ...this, passing in the path_summary
	explicitly.
	(default_tree_diagnostic_path_printer): Update for above change.
	(selftest::test_empty_path): Likewise.
	(selftest::test_intraprocedural_path): Likewise.
	(selftest::test_interprocedural_path_1): Likewise.
	(selftest::test_interprocedural_path_2): Likewise.
	(selftest::test_recursion): Likewise.

2020-11-05  qing zhao  <qinzhao@gcc.gnu.org>

	PR target/97715
	* config/i386/i386.c (zero_all_st_registers): Return
	earlier when the FPU is disabled.

2020-11-05  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (parm_map_for_arg): Initialize parm_offset and
	parm_offset_knonw.
	(read_section): Set writes_errno to false.

2020-11-05  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences):
	Use the original stmts.
	(vect_slp_analyze_node_alignment): Use the pattern stmt.
	* tree-vect-slp.c (vect_fixup_store_groups_with_patterns):
	New function.
	(vect_slp_analyze_bb_1): Call it.

2020-11-05  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-slp.c (vect_slp_tree_permute_noop_p): New.
	(vect_optimize_slp): Optimize permutes.
	(vectorizable_slp_permutation): Fix typo.

2020-11-05  Richard Biener  <rguenther@suse.de>

	PR debug/97718
	* dwarf2out.c (add_abstract_origin_attribute): Make sure to
	point to the abstract instance.

2020-11-05  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-loop.c (vect_analyze_loop_2): Check kind.
	* tree-vect-slp.c (vect_build_slp_instance): New.
	(enum slp_instance_kind): Move to...
	* tree-vectorizer.h (enum slp_instance_kind): .. Here
	(SLP_INSTANCE_KIND): New.

2020-11-05  Kewen Lin  <linkw@linux.ibm.com>

	PR target/96933
	* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use direct move
	instructions for vector construction with char/short types.
	* config/rs6000/rs6000.md (p8_mtvsrwz_v16qisi2): New define_insn.
	(p8_mtvsrd_v16qidi2): Likewise.

2020-11-04  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-slp.c (vect_analyze_slp_instance): Moved load/store lanes
	check to ...
	* tree-vect-loop.c (vect_analyze_loop_2): ..Here

2020-11-04  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (NR_C_MODES): Unhardcode.
	(s390_alloc_pool): Use size_t for iterating from 0 to
	NR_C_MODES.
	(s390_add_constant): Likewise.
	(s390_find_constant): Likewise.
	(s390_dump_pool): Likewise.
	(s390_free_pool): Likewise.

2020-11-04  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.md (RRe): Remove.
	(RXe): Remove.

2020-11-04  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97515
	* gimple-range-cache.h (class ranger_cache): New prototypes plus
	temporal cache pointer.
	* gimple-range-cache.cc (struct range_timestamp): New.
	(class temporal_cache): New.
	(temporal_cache::temporal_cache): New.
	(temporal_cache::~temporal_cache): New.
	(temporal_cache::get_timestamp): New.
	(temporal_cache::set_dependency): New.
	(temporal_cache::temporal_value): New.
	(temporal_cache::current_p): New.
	(temporal_cache::set_timestamp): New.
	(temporal_cache::set_always_current): New.
	(ranger_cache::ranger_cache): Allocate the temporal cache.
	(ranger_cache::~ranger_cache): Free temporal cache.
	(ranger_cache::get_non_stale_global_range): New.
	(ranger_cache::set_global_range): Add a timestamp.
	(ranger_cache::register_dependency): New.  Add timestamp dependency.
	* gimple-range.cc (gimple_ranger::range_of_range_op): Add operand
	dependencies.
	(gimple_ranger::range_of_phi): Ditto.
	(gimple_ranger::range_of_stmt): Check if global range is stale, and
	recalculate if so.

2020-11-04  Tobias Burnus  <tobias@codesourcery.com>

	* targhooks.c (default_zero_call_used_regs): Fix flag-name typo
	in sorry.

2020-11-04  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vectorizable_phi): Adjust prototype.
	* tree-vect-stmts.c (vect_transform_stmt): Adjust.
	(vect_analyze_stmt): Pass cost_vec to vectorizable_phi.
	* tree-vect-loop.c (vectorizable_phi): Do costing.

2020-11-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97709
	* tree-vect-loop.c (vectorizable_live_operation): Set
	SSA_NAME_OCCURS_IN_ABNORMAL_PHI when necessary.

2020-11-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97690
	* tree-ssa-phiopt.c (conditional_replacement): Also optimize
	cond ? pow2p_cst : 0 as ((type) cond) << cst.

2020-11-04  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_induction): Re-instantiate
	previously removed CSE of SLP IVs.

2020-11-04  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-options.c (ix86_recompute_optlev_based_flags):
	Fix Intel MCU psABI comment w.r.t DEFAULT_PCC_STRUCT_RETURN.

2020-11-04  Richard Biener  <rguenther@suse.de>

	PR bootstrap/97666
	* tree-vect-slp.c (vect_build_slp_tree_2): Revert previous
	fix and instead adjust the memset.

2020-11-04  Pat Bernardi  <bernardi@adacore.com>

	* config/i386/i386elf.h (SUBTARGET_RETURN_IN_MEMORY): Remove.
	(ASM_OUTPUT_ASCII): Likewise.
	(DEFAULT_PCC_STRUCT_RETURN): Define.
	* config/i386/i386.c (ix86_return_in_memory): Remove
	SUBTARGET_RETURN_IN_MEMORY.

2020-11-04  liuhongt  <hongtao.liu@intel.com>

	PR target/97540
	* ira.c: (ira_setup_alts): Extract memory from operand only
	for special memory constraint.
	* recog.c (asm_operand_ok): Ditto.
	* lra-constraints.c (process_alt_operands): MEM_P is
	required for normal memory constraint.

2020-11-04  liuhongt  <hongtao.liu@intel.com>

	PR target/97532
	* lra-constraints.c (valid_address_p): Handle operand of
	special memory constraint.
	(process_address_1): Ditto.

2020-11-03  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/97695
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Fix ICE with
	in dumping code.
	(cgraph_node::remove): Save clone info before releasing it and pass it
	to unregister.
	* cgraph.h (symtab_node::unregister): Add clone_info parameter.
	(cgraph_clone::unregister): Likewise.
	* cgraphclones.c (cgraph_node::find_replacement): Copy clone info
	* symtab-clones.cc (clone_infos_t::duplicate): Remove.
	(clone_info::get_create): Simplify.
	* symtab.c (symtab_node::unregister): Pass around clone info.
	* varpool.c (varpool_node::remove): Update.

2020-11-03  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (scan_omp_for) <OpenACC>: Use proper location to
	'inform' of enclosing parent compute construct.

2020-11-03  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/97698
	* cgraphclones.c (duplicate_thunk_for_node): Check that info is
	non-NULL.

2020-11-03  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_function_arg_regno_p): Use up to
	SSE_REGPARM_MAX registers to pass function parameters
	for 32bit Mach-O targets.
	* config/i386/i386.h (X86_32_MMX_REGPARM_MAX): New macro.
	(MMX_REGPARM_MAX): Use it.

2020-11-03  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64-simd-builtins.def (vget_lo_half): New entry.
	(vget_hi_half): Likewise.
	* config/aarch64/aarch64-simd.md (aarch64_vget_lo_halfv8bf): New entry.
	(aarch64_vget_hi_halfv8bf): Likewise.
	* config/aarch64/arm_neon.h (vget_low_bf16): New intrinsic.
	(vget_high_bf16): Likewise.

2020-11-03  Yang Yang  <yangyang305@huawei.com>

	* cgraph.h (struct cgraph_simd_clone): Change field "simdlen" of
	struct cgraph_simd_clone from unsigned int to poly_uint64.
	* config/aarch64/aarch64.c
	(aarch64_simd_clone_compute_vecsize_and_simdlen): adaptation of
	operations on "simdlen".
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	Printf formats update.
	* gengtype.c (main): Handle poly_uint64.
	* omp-simd-clone.c (simd_clone_mangle): Likewise.Re
	(simd_clone_adjust_return_type): Likewise.
	(create_tmp_simd_array): Likewise.
	(simd_clone_adjust_argument_types): Likewise.
	(simd_clone_init_simd_arrays): Likewise.
	(ipa_simd_modify_function_body): Likewise.
	(simd_clone_adjust): Likewise.
	(expand_simd_clones): Likewise.
	* poly-int-types.h (vector_unroll_factor): New macro.
	* poly-int.h (constant_multiple_p): Add two-argument versions.
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.

2020-11-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97623
	* params.opt (-param=max-pre-hoist-insert-iterations): New.
	* doc/invoke.texi (max-pre-hoist-insert-iterations): Document.
	* tree-ssa-pre.c (insert): Do at most max-pre-hoist-insert-iterations
	hoist insert iterations.

2020-11-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/97579
	* gimple-isel.cc (gimple_expand_vec_cond_expr): Use
	the correct types for the vcond_mask/vec_cmp optab queries.

2020-11-03  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range-cache.cc (ssa_global_cache::get_global_range): Return
	true if there was a previous range set.
	(ranger_cache::ranger_cache): Take a gimple_ranger parameter.
	(ranger_cache::set_global_range): Propagate the value if updating.
	(ranger_cache::propagate_cache): Renamed from iterative_cache_update.
	(ranger_cache::propagate_updated_value): New.  Split from:
	(ranger_cache::fill_block_cache): Split out value propagator.
	* gimple-range-cache.h (ssa_global_cache): Update prototypes.
	(ranger_cache): Update prototypes.

2020-11-03  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range-cache.h (block_range_cache): Add new entry point.
	(ranger_cache): Privatize global abnd block cache members.
	* gimple-range-cache.cc (ssa_block_ranges::set_bb_range): Add bounds
	check.
	(ssa_block_ranges::set_bb_varying): Ditto.
	(ssa_block_ranges::get_bb_range): Ditto.
	(ssa_block_ranges::bb_range_p): Ditto.
	(block_range_cache::get_block_ranges): Fix formatting.
	(block_range_cache::query_block_ranges): New.
	(block_range_cache::get_bb_range): Use Query_block_ranges.
	(block_range_cache::bb_range_p): Ditto.
	(ranger_cache::dump): New.
	(ranger_cache::get_global_range): New.
	(ranger_cache::set_global_range): New.
	* gimple-range.cc (gimple_ranger::range_of_expr): Use new API.
	(gimple_ranger::range_of_stmt): Ditto.
	(gimple_ranger::export_global_ranges): Ditto.
	(gimple_ranger::dump): Ditto.

2020-11-03  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* fold-const.c (getbyterep): Remove duplicated statement.

2020-11-03  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR target/97205
	* cfgexpand.c (align_local_variable): Make SSA_NAMEs
	at least MODE_ALIGNED.
	(expand_one_stack_var_at): Increase MEM_ALIGN for SSA_NAMEs.

2020-11-03  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for AES/SHA/SM3/SM4 intrinsics.

2020-11-03  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for compare intrinsics.

2020-11-03  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (maybe_create_die_with_external_ref): Remove
	hashtable entry.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon.h (vst2_lane_bf16, vst2q_lane_bf16)
	(vst3_lane_bf16, vst3q_lane_bf16, vst4_lane_bf16)
	(vst4q_lane_bf16): New intrinsics.
	* config/arm/arm_neon_builtins.def: Touch it for:
	__builtin_neon_vst2_lanev4bf, __builtin_neon_vst2_lanev8bf,
	__builtin_neon_vst3_lanev4bf, __builtin_neon_vst3_lanev8bf,
	__builtin_neon_vst4_lanev4bf,__builtin_neon_vst4_lanev8bf.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon.h (vld2_lane_bf16, vld2q_lane_bf16)
	(vld3_lane_bf16, vld3q_lane_bf16, vld4_lane_bf16)
	(vld4q_lane_bf16): Add intrinsics.
	* config/arm/arm_neon_builtins.def: Touch for:
	__builtin_neon_vld2_lanev4bf, __builtin_neon_vld2_lanev8bf,
	__builtin_neon_vld3_lanev4bf, __builtin_neon_vld3_lanev8bf,
	__builtin_neon_vld4_lanev4bf, __builtin_neon_vld4_lanev8bf.
	* config/arm/iterators.md (VQ_HS): Add V8BF to the iterator.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon.h (vst1_bf16, vst1q_bf16): Add intrinsics.
	* config/arm/arm_neon_builtins.def : Touch for:
	__builtin_neon_vst1v4bf, __builtin_neon_vst1v8bf.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm-builtins.c (VAR14): Define macro.
	* config/arm/arm_neon_builtins.def: Touch for:
	__builtin_neon_vld1v4bf, __builtin_neon_vld1v8bf.
	* config/arm/arm_neon.h (vld1_bf16, vld1q_bf16): Add intrinsics.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon.h (vst1_lane_bf16, vst1q_lane_bf16): Add
	intrinsics.
	* config/arm/arm_neon_builtins.def (STORE1LANE): Add v4bf, v8bf.

2020-11-03  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm_neon_builtins.def: Add to LOAD1LANE v4bf, v8bf.
	* config/arm/arm_neon.h (vld1_lane_bf16, vld1q_lane_bf16): Add
	intrinsics.

2020-11-03  Richard Biener  <rguenther@suse.de>

	PR bootstrap/97666
	* tree-vect-slp.c (vect_build_slp_tree_2): Scale
	allocation of skip_args by sizeof (bool).

2020-11-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/80928
	* tree-vect-loop.c (vectorizable_induction): SLP vectorize
	nested inductions.

2020-11-03  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/97578
	* ipa-inline-transform.c (maybe_materialize_called_clones): New
	function.
	(inline_transform): Use it.

2020-11-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97678
	* tree-vect-slp.c (vect_build_slp_tree_2): Do not track
	the initial values of inductions when not nested.
	* tree-vect-loop.c (vectorizable_induction): Look at
	PHI node initial values again for SLP and not nested
	inductions.  Handle LOOP_VINFO_MASK_SKIP_NITERS and cost
	invariants.

2020-11-03  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (aes<aeswideklvariant>u8):
	Do not use xmm_regs array.  Fix whitespace.

2020-11-03  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_builtin): Fix comment.

2020-11-03  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (scan_omp_for) <OpenACC>: Move earlier inconsistent
	nested 'reduction' clauses checking.

2020-11-03  Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (scan_omp_for) <OpenACC>: More precise diagnostics for
	'gang', 'worker', 'vector' clauses with arguments only allowed in
	'kernels' regions.

2020-11-03  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/96789
	* function.h (struct function): New member unsigned pending_TODOs.
	* passes.c (class pass_pre_slp_scalar_cleanup): New class.
	(make_pass_pre_slp_scalar_cleanup): New function.
	(pass_data_pre_slp_scalar_cleanup): New pass data.
	* passes.def: (pass_pre_slp_scalar_cleanup): New pass, add
	pass_fre and pass_dse as its children.
	* timevar.def (TV_SCALAR_CLEANUP): New timevar.
	* tree-pass.h (PENDING_TODO_force_next_scalar_cleanup): New
	pending TODO flag.
	(make_pass_pre_slp_scalar_cleanup): New declare.
	* tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely_1):
	Once any outermost loop gets unrolled, flag cfun pending_TODOs
	PENDING_TODO_force_next_scalar_cleanup on.

2020-11-02  Alan Modra  <amodra@gmail.com>

	PR middle-end/97267
	* calls.h (maybe_complain_about_tail_call): Declare.
	* calls.c (maybe_complain_about_tail_call): Make global.
	(can_implement_as_sibling_call_p): Delete reg_parm_stack_space
	param.  Adjust caller.  Move REG_PARM_STACK_SPACE check to..
	* config/i386/i386.c (ix86_function_ok_for_sibcall): ..here.

2020-11-02  Vladimir N. Makarov  <vmakarov@redhat.com>

	* ira.c (ira_remove_scratches): Rename to remove_scratches.  Make
	it static and returning flag of any change.
	(ira.c): Call ira_expand_reg_equiv in case of removing scratches.

2020-11-02  H.J. Lu  <hjl.tools@gmail.com>

	PR target/97140
	* config/i386/i386-expand.c (ix86_expand_builtin): Require MMX
	for __builtin_ia32_maskmovq.

2020-11-02  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wstringop-overflow): Correct default setting.
	(-Wstringop-overread): Move past -Wstringop-overflow.

2020-11-02  François-Xavier Coudert  <fxcoudert@gcc.gnu.org>

	PR bootstrap/57076
	* Makefile.in (gcc-vers.texi): Quote @, { and }.

2020-11-02  Carl Love  <cel@us.ibm.com>

	PR target/93449
	* config/rs6000/altivec.h (__builtin_bcdadd, __builtin_bcdadd_lt,
	__builtin_bcdadd_eq, __builtin_bcdadd_gt, __builtin_bcdadd_ofl,
	__builtin_bcdadd_ov, __builtin_bcdsub, __builtin_bcdsub_lt,
	__builtin_bcdsub_eq, __builtin_bcdsub_gt, __builtin_bcdsub_ofl,
	__builtin_bcdsub_ov, __builtin_bcdinvalid, __builtin_bcdmul10,
	__builtin_bcddiv10, __builtin_bcd2dfp, __builtin_bcdcmpeq,
	__builtin_bcdcmpgt, __builtin_bcdcmplt, __builtin_bcdcmpge,
	__builtin_bcdcmple): Add defines.
	* config/rs6000/altivec.md: Add UNSPEC_BCDSHIFT.
	(BCD_TEST): Add le, ge to code iterator.
	Add VBCD mode iterator.
	(bcd<bcd_add_sub>_test, *bcd<bcd_add_sub>_test2,
	bcd<bcd_add_sub>_<code>, bcd<bcd_add_sub>_<code>): Add mode to name.
	Change iterator from V1TI to VBCD.
	(*bcdinvalid_<mode>, bcdshift_v16qi): New define_insn.
	(bcdinvalid_<mode>, bcdmul10_v16qi, bcddiv10_v16qi): New define.
	* config/rs6000/dfp.md (dfp_denbcd_v16qi_inst): New define_insn.
	(dfp_denbcd_v16qi): New define_expand.
	* config/rs6000/rs6000-builtin.def (BU_P8V_MISC_1): New define.
	(BCDADD): Replaced with BCDADD_V1TI and BCDADD_V16QI.
	(BCDADD_LT): Replaced with BCDADD_LT_V1TI and BCDADD_LT_V16QI.
	(BCDADD_EQ): Replaced with BCDADD_EQ_V1TI and BCDADD_EQ_V16QI.
	(BCDADD_GT): Replaced with BCDADD_GT_V1TI and BCDADD_GT_V16QI.
	(BCDADD_OV): Replaced with BCDADD_OV_V1TI and BCDADD_OV_V16QI.
	(BCDSUB_V1TI, BCDSUB_V16QI, BCDSUB_LT_V1TI, BCDSUB_LT_V16QI,
	BCDSUB_LE_V1TI, BCDSUB_LE_V16QI, BCDSUB_EQ_V1TI, BCDSUB_EQ_V16QI,
	BCDSUB_GT_V1TI, BCDSUB_GT_V16QI, BCDSUB_GE_V1TI, BCDSUB_GE_V16QI,
	BCDSUB_OV_V1TI, BCDSUB_OV_V16QI, BCDINVALID_V1TI, BCDINVALID_V16QI,
	BCDMUL10_V16QI, BCDDIV10_V16QI, DENBCD_V16QI): New builtin definitions.
	(BCDADD, BCDADD_LT, BCDADD_EQ, BCDADD_GT, BCDADD_OV, BCDSUB, BCDSUB_LT,
	BCDSUB_LE, BCDSUB_EQ, BCDSUB_GT, BCDSUB_GE, BCDSUB_OV, BCDINVALID,
	BCDMUL10, BCDDIV10, DENBCD): New overload definitions.
	* config/rs6000/rs6000-call.c (P8V_BUILTIN_VEC_BCDADD, P8V_BUILTIN_VEC_BCDADD_LT,
	P8V_BUILTIN_VEC_BCDADD_EQ, P8V_BUILTIN_VEC_BCDADD_GT, P8V_BUILTIN_VEC_BCDADD_OV,
	P8V_BUILTIN_VEC_BCDINVALID, P9V_BUILTIN_VEC_BCDMUL10, P8V_BUILTIN_VEC_DENBCD.
	P8V_BUILTIN_VEC_BCDSUB, P8V_BUILTIN_VEC_BCDSUB_LT, P8V_BUILTIN_VEC_BCDSUB_LE,
	P8V_BUILTIN_VEC_BCDSUB_EQ, P8V_BUILTIN_VEC_BCDSUB_GT, P8V_BUILTIN_VEC_BCDSUB_GE,
	P8V_BUILTIN_VEC_BCDSUB_OV): New overloaded specifications.
	(CODE_FOR_bcdadd): Replaced with CODE_FOR_bcdadd_v16qi and CODE_FOR_bcdadd_v1ti.
	(CODE_FOR_bcdadd_lt): Replaced with CODE_FOR_bcdadd_lt_v16qi and CODE_FOR_bcdadd_lt_v1ti.
	(CODE_FOR_bcdadd_eq): Replaced with CODE_FOR_bcdadd_eq_v16qi and CODE_FOR_bcdadd_eq_v1ti.
	(CODE_FOR_bcdadd_gt): Replaced with CODE_FOR_bcdadd_gt_v16qi and CODE_FOR_bcdadd_gt_v1ti.
	(CODE_FOR_bcdsub): Replaced with CODE_FOR_bcdsub_v16qi and CODE_FOR_bcdsub_v1ti.
	(CODE_FOR_bcdsub_lt): Replaced with CODE_FOR_bcdsub_lt_v16qi and CODE_FOR_bcdsub_lt_v1ti.
	(CODE_FOR_bcdsub_eq): Replaced with CODE_FOR_bcdsub_eq_v16qi and CODE_FOR_bcdsub_eq_v1ti.
	(CODE_FOR_bcdsub_gt): Replaced with CODE_FOR_bcdsub_gt_v16qi and CODE_FOR_bcdsub_gt_v1ti.
	(rs6000_expand_ternop_builtin):  Add CODE_FOR_dfp_denbcd_v16qi to else if.
	* doc/extend.texi: Add documentation for new builtins.

2020-11-02  Nathan Sidwell  <nathan@acm.org>

	* tree.c (cache_integer_cst): Fixup pointer caching to match
	wide_int_to_type_1's expectations.  Add comment.

2020-11-02  Nathan Sidwell  <nathan@acm.org>

	* tree.h (id_equal): Call the symetric predicate with swapped
	arguments.

2020-11-02  Nathan Sidwell  <nathan@acm.org>

	* print-tree.c (print_node): Display all the operands of a call
	expr.

2020-11-02  Vladimir N. Makarov  <vmakarov@redhat.com>

	* config/rs6000/vsx.md (*vsx_extract_<mode>_store_p9): Add hint *
	to 2nd alternative of the 1st scratch.

2020-11-02  Sudakshina Das  <sudi.das@arm.com>

	PR target/97638
	* config/aarch64/aarch64-bti-insert.c (aarch64_pac_insn_p): Update
	return value on INSN_P check.

2020-11-02  Richard Biener  <rguenther@suse.de>

	* tree.h (build_real_from_wide): Declare.
	* tree.c (build_real_from_wide): New function.
	* tree-vect-slp.c (vect_build_slp_tree_2): Remove
	restriction on induction vectorization, represent
	the initial value.
	* tree-vect-loop.c (vect_model_induction_cost): Inline ...
	(vectorizable_induction): ... here.  Rewrite SLP
	code generation.

2020-11-02  Martin Jambor  <mjambor@suse.cz>

	* dbgcnt.def (ipa_cp_values): New counter.
	(ipa_cp_vr): Likewise.
	* ipa-cp.c (decide_about_value): Check and bump ipa_cp_values debug
	counter.
	(decide_whether_version_node): Likewise.
	(ipcp_store_vr_results):Check and bump ipa_cp_vr debug counter.

2020-11-02  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.c (arm_thumb1_mi_thunk): Build mi_delta in r3 and
	do not emit function address and delta when -mpure-code is used.

2020-11-02  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/thumb1.md (thumb1_movsi_insn): Call
	thumb1_gen_const_int_print.
	* config/arm/arm-protos.h (thumb1_gen_const_int_print): Add
	prototype.
	* config/arm/arm.c (thumb1_gen_const_int_print): New.

2020-11-02  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.c (thumb1_const_rtl, thumb1_const_print): New
	classes.
	(thumb1_gen_const_int): Rename to ...
	(thumb1_gen_const_int_1): ... New helper function. Add capability
	to emit either RTL or asm, improve generated code.
	(thumb1_gen_const_int_rtl): New function.
	* config/arm/arm-protos.h (thumb1_gen_const_int): Rename to
	thumb1_gen_const_int_rtl.
	* config/arm/thumb1.md: Call thumb1_gen_const_int_rtl instead
	of thumb1_gen_const_int.

2020-11-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97558
	* tree-vect-loop.c (vectorizable_reduction): For nested SLP
	cycles compute invariant operands vector type.

2020-11-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97558
	* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns):
	Check for any mismatch in pattern vs. non-pattern and dissolve
	the group if there is one.
	* tree-vect-slp.c (vect_analyze_slp_instance): Avoid
	analyzing not relevant reductions.
	(vect_analyze_slp): Avoid analyzing not relevant reduction
	groups.

2020-11-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97650
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Check
	for SSA_NAME before checking SSA_NAME_IS_DEFAULT_DEF.

2020-11-02  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c
	(riscv_subset_list::parse_multiletter_ext): Checking multiletter
	extension has more than 1 letter.

2020-11-02  Kito Cheng  <kito.cheng@sifive.com>

	* config.gcc (riscv*-*-*): Handle --with-multilib-generator.
	* configure: Regen.
	* configure.ac: Add --with-multilib-generator.
	* config/riscv/multilib-generator: Exit when parsing arch string error.
	* config/riscv/t-withmultilib-generator: New.
	* doc/install.texi: Document --with-multilib-generator.

2020-11-02  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96770
	* config/arm/arm.c (thumb_legitimate_constant_p): Accept
	(symbol_ref + addend) when literal pool is disabled.
	(arm_valid_symbolic_address_p): Add support for thumb-1 without
	MOVT/MOVW.
	* config/arm/thumb1.md (*thumb1_movsi_insn): Accept (symbol_ref +
	addend) in the pure-code alternative.

2020-11-02  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96967
	* config/arm/arm.c (thumb_legitimate_constant_p): Add support for
	disabled literal pool in thumb-1.
	* config/arm/thumb1.md (thumb1_movsi_symbol_ref): Remove.
	(*thumb1_movsi_insn): Add support for SYMBOL_REF with -mpure-code.

2020-11-01  Iain Sandoe  <iain@sandoe.co.uk>

	* config/host-darwin.c: Align pch_address_space to 16384.

2020-11-01  Pat Bernardi  <bernardi@adacore.com>

	* config/i386/i386.c (ix86_expand_prologue): Set the stack usage to 0
	for naked functions.

2020-11-01  Iain Buclaw  <ibuclaw@gdcproject.org>

	PR ipa/97660
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Don't call
	clone_info::get when cgraph_node::get returns NULL.

2020-10-31  Jan Hubicka  <jh@suse.cz>

	* Makefile.in: (OBJS): Add symtab-clones.o
	(GTFILES): Add symtab-clones.h
	* cgraph.c: Include symtab-clones.h.
	(cgraph_edge::resolve_speculation): Fix formating
	(cgraph_edge::redirect_call_stmt_to_callee): Update.
	(cgraph_update_edges_for_call_stmt): Update
	(release_function_body): Fix formating.
	(cgraph_node::remove): Fix formating.
	(cgraph_node::dump): Fix formating.
	(cgraph_node::get_availability): Fix formating.
	(cgraph_node::call_for_symbol_thunks_and_aliases): Fix formating.
	(set_const_flag_1): Fix formating.
	(set_pure_flag_1): Fix formating.
	(cgraph_node::can_remove_if_no_direct_calls_p): Fix formating.
	(collect_callers_of_node_1): Fix formating.
	(clone_of_p): Update.
	(cgraph_node::verify_node): Update.
	(cgraph_c_finalize): Call clone_info::release ().
	* cgraph.h (struct cgraph_clone_info): Move to symtab-clones.h.
	(cgraph_node): Remove clone_info.
	(symbol_table): Add m_clones.
	* cgraphclones.c: Include symtab-clone.h.
	(duplicate_thunk_for_node): Update.
	(cgraph_node::create_clone): Update.
	(cgraph_node::create_virtual_clone): Update.
	(cgraph_node::find_replacement): Update.
	(cgraph_node::materialize_clone): Update.
	* gengtype.c (open_base_files): Include symtab-clones.h.
	* ipa-cp.c: Include symtab-clones.h.
	(initialize_node_lattices): Update.
	(want_remove_some_param_p): Update.
	(create_specialized_node): Update.
	* ipa-fnsummary.c: Include symtab-clones.h.
	(ipa_fn_summary_t::duplicate): Update.
	* ipa-modref.c: Include symtab-clones.h.
	(update_signature): Update.
	* ipa-param-manipulation.c: Include symtab-clones.h.
	(ipa_param_body_adjustments::common_initialization): Update.
	* ipa-prop.c: Include symtab-clones.h.
	(adjust_agg_replacement_values): Update.
	(ipcp_get_parm_bits): Update.
	(ipcp_update_bits): Update.
	(ipcp_update_vr): Update.
	* ipa-sra.c: Include symtab-clones.h.
	(process_isra_node_results): Update.
	(disable_unavailable_parameters): Update.
	* lto-cgraph.c: Include symtab-clone.h.
	(output_cgraph_opt_summary_p): Update.
	(output_node_opt_summary): Update.
	(input_node_opt_summary): Update.
	* symtab-clones.cc: New file.
	* symtab-clones.h: New file.
	* tree-inline.c (expand_call_inline): Update.
	(update_clone_info): Update.
	(tree_function_versioning): Update.

2020-10-31  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_summary::dump): Dump writes_errno.
	(parm_map_for_arg): Break out from ...
	(merge_call_side_effects): ... here.
	(get_access_for_fnspec): New function.
	(process_fnspec): New function.
	(analyze_call): Use it.
	(analyze_stmt): Update.
	(analyze_function): Initialize writes_errno.
	(modref_summaries::duplicate): Duplicate writes_errno.
	* ipa-modref.h (struct modref_summary): Add writes_errno.
	* tree-ssa-alias.c (call_may_clobber_ref_p_1): Check errno.

2020-10-30  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (glibc_supports_ieee_128bit): New helper
	function.
	(rs6000_option_override_internal): Call it.

2020-10-30  Qing Zhao  <qing.zhao@oracle.com>
	    H.J.Lu  <hjl.tools@gmail.com>

	* common.opt: Add new option -fzero-call-used-regs
	* config/i386/i386.c (zero_call_used_regno_p): New function.
	(zero_call_used_regno_mode): Likewise.
	(zero_all_vector_registers): Likewise.
	(zero_all_st_registers): Likewise.
	(zero_all_mm_registers): Likewise.
	(ix86_zero_call_used_regs): Likewise.
	(TARGET_ZERO_CALL_USED_REGS): Define.
	* df-scan.c (df_epilogue_uses_p): New function.
	(df_get_exit_block_use_set): Replace EPILOGUE_USES with
	df_epilogue_uses_p.
	* df.h (df_epilogue_uses_p): Declare.
	* doc/extend.texi: Document the new zero_call_used_regs attribute.
	* doc/invoke.texi: Document the new -fzero-call-used-regs option.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (TARGET_ZERO_CALL_USED_REGS): New hook.
	* emit-rtl.h (struct rtl_data): New field must_be_zero_on_return.
	* flag-types.h (namespace zero_regs_flags): New namespace.
	* function.c (gen_call_used_regs_seq): New function.
	(class pass_zero_call_used_regs): New class.
	(pass_zero_call_used_regs::execute): New function.
	(make_pass_zero_call_used_regs): New function.
	* optabs.c (expand_asm_reg_clobber_mem_blockage): New function.
	* optabs.h (expand_asm_reg_clobber_mem_blockage): Declare.
	* opts.c (zero_call_used_regs_opts): New structure array
	initialization.
	(parse_zero_call_used_regs_options): New function.
	(common_handle_option): Handle -fzero-call-used-regs.
	* opts.h (zero_call_used_regs_opts): New structure array.
	* passes.def: Add new pass pass_zero_call_used_regs.
	* recog.c (valid_insn_p): New function.
	* recog.h (valid_insn_p): Declare.
	* resource.c (init_resource_info): Replace EPILOGUE_USES with
	df_epilogue_uses_p.
	* target.def (zero_call_used_regs): New hook.
	* targhooks.c (default_zero_call_used_regs): New function.
	* targhooks.h (default_zero_call_used_regs): Declare.
	* tree-pass.h (make_pass_zero_call_used_regs): Declare.

2020-10-30  Vladimir N. Makarov  <vmakarov@redhat.com>

	* lra.c (get_scratch_reg): New function.
	(remove_scratches_1): Rename remove_insn_scratches.  Use
	ira_remove_insn_scratches and get_scratch_reg.
	(remove_scratches): Do not
	initialize scratches, scratch_bitmap, and scratch_operand_bitmap.
	(lra): Call ira_restore_scratches instead of restore_scratches.
	(struct sloc, sloc_t, scratches, scratch_bitmap)
	(scratch_operand_bitmap, lra_former_scratch_p)
	(lra_former_scratch_operand_p, lra_register_new_scratch_op)
	(restore_scratches): Move them to ...
	* ira.c: ... here.
	(former_scratch_p, former_scratch_operand_p): Rename to
	ira_former_scratch_p and ira_former_scratch_operand_p.
	(contains_X_constraint_p): New function.
	(register_new_scratch_op): Rename to ira_register_new_scratch_op.
	Change it to work for IRA and LRA.
	(restore_scratches): Rename to ira_restore_scratches.
	(get_scratch_reg, ira_remove_insn_scratches): New functions.
	(ira): Call ira_remove_scratches if we use LRA.
	* ira.h (ira_former_scratch_p, ira_former_scratch_operand_p): New
	prototypes.
	(ira_register_new_scratch_op, ira_restore_scratches): New prototypes.
	(ira_remove_insn_scratches): New prototype.
	* lra-int.h (lra_former_scratch_p, lra_former_scratch_operand_p):
	Remove prototypes.
	(lra_register_new_scratch_op): Ditto.
	* lra-constraints.c: Rename lra_former_scratch_p and
	lra_former_scratch_p to ira_former_scratch_p and to
	ira_former_scratch_p.
	* lra-remat.c: Ditto.
	* lra-spills.c: Rename lra_former_scratch_p to ira_former_scratch_p.

2020-10-30  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97556
	* builtins.c (access_ref::add_offset): Cap offset lower bound
	to at most the the upper bound.

2020-10-30  Jan Hubicka  <jh@suse.cz>

	PR pch/97593
	* cgraph.c (cgraph_node::create_thunk): Register thunk as early during
	parsing.
	* cgraphunit.c (analyze_functions): Call
	thunk_info::process_early_thunks.
	* symtab-thunks.cc (struct unprocessed_thunk): New struct.
	(thunks): New static variable.
	(thunk_info::register_early): New member function.
	(thunk_info::process_early_thunks): New member function.
	* symtab-thunks.h (thunk_info::register_early): Declare.
	(thunk_info::process_early_thunks): Declare.

2020-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97623
	* tree-ssa-pre.c (insert): First do hoist insertion in
	a backward walk.

2020-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97626
	* tree-vect-slp.c (vect_slp_analyze_node_operations):
	Exchange the lvisited hash-set for a vector, roll back
	recursive adds to visited when analysis failed.
	(vect_slp_analyze_operations): Likewise.

2020-10-30  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for conversion intrinsics.

2020-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97633
	* tree-vect-slp.c (): Update backedges in single-node cycles.
	Optimize processing of externals.

2020-10-30  Alex Coplan  <alex.coplan@arm.com>

	PR target/96998
	* combine.c (make_extraction): Also handle shifts written as
	(mult x 2^n), avoid creating an extract rtx for these.
	* config/aarch64/aarch64.c (aarch64_is_extend_from_extract): Delete.
	(aarch64_classify_index): Remove extract-based address handling.
	(aarch64_strip_extend): Likewise.
	(aarch64_rtx_arith_op_extract_p): Likewise, remove now-unused parameter.
	Update callers...
	(aarch64_rtx_costs): ... here.

2020-10-30  Olivier Hainque  <hainque@adacore.com>

	* config/rs6000/vxworks.h (TARGET_OS_CPP_BUILTINS): Also
	builtin_define __ppc and __ppc__ for VxWorks 7.

2020-10-30  Olivier Hainque  <hainque@adacore.com>
	    Douglas Rupp  <rupp@adacore.com>
	    Pat Bernardi  <bernardi@adacore.com>

	* config.gcc: Adjust the ix86/x86_64-wrs-vxworks filters
	to apply to VxWorks 7 as well.
	* config/i386/t-vxworks (MULTILIB_OPTIONS, MULTILIB_DIRNAMES):
	Remove the fPIC multilib and add one for the large code model
	on x86_64.
	* config/i386/vxworks.h: Separate sections for TARGET_VXWORKS7,
	other variants and common bits.
	(TARGET_OS_CPP_BUILTINS): Augment to support a range of CPU
	families. Leverage VX_CPU_PREFIX.
	(CC1_SPEC): Add definition.
	(STACK_CHECK_PROTECT): Use conditional expression instead of
	heavier to read conditioned macro definitions.

2020-10-30  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_scan_omp_clauses): Force
	OMP_CLAUSE_ALLOCATE_ALLOCATOR into a temporary if it is non-NULL and
	non-constant.
	(gimplify_omp_for): Only put allocate on inner taskloop if lastprivate
	for the same variable is going to be put there, and in that case
	if the OMP_CLAUSE_ALLOCATE_ALLOCATOR is non-NULL non-constant, make
	the allocator firstprivate on task.

2020-10-30  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Allow
	long double type to be changed for C/C++ if glibc 2.32 or newer.
	(rs6000_invalid_binary_op): Update error messages about mixing IBM
	long double and IEEE 128-bit.

2020-10-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (compute_avail): Free operands consistently.
	* tree-vect-loop.c (vectorizable_phi): Make sure all operand
	defs vectors are released.

2020-10-29  Jan Hubicka  <jh@suse.cz>

	* vec.h (vec<T, va_heap, vl_ptr>::copy): Pass mem stat info.

2020-10-29  Jan Hubicka  <jh@suse.cz>

	* wide-int.h (trailing_wide_ints <N>): Turn len to array of structures
	so it does not imply typeless storage.
	(trailing_wide_ints <N>::operator): update
	(trailing_wide_ints <N>::operator []): Update.

2020-10-29  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/stdbool.h [__STDC_VERSION__ > 201710L] (true, false):
	Define with type _Bool.

2020-10-29  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97505
	* vr-values.c (vr_values::extract_range_basic): Enable
	trap again for everything except UBSAN builtins.

2020-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_transform_slp_perm_load): Take an
	optional extra parameter.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Calculate
	the number of loads as well as the number of permutes, taking
	the counting loop from...
	* tree-vect-stmts.c (vect_model_load_cost): ...here.  Use the
	value computed by vect_transform_slp_perm_load for ncopies.

2020-10-29  Martin Liska  <mliska@suse.cz>

	PR lto/97508
	* langhooks.c (lhd_begin_section): Call get_section with
	not_existing = true.
	* output.h (get_section): Add new argument.
	* varasm.c (get_section): Fail when NOT_EXISTING is true
	and a section already exists.
	* ipa-cp.c (ipcp_write_summary): Remove.
	(ipcp_read_summary): Likewise.
	* ipa-fnsummary.c (ipa_fn_summary_read): Always read jump
	functions summary.
	(ipa_fn_summary_write): Always stream it.

2020-10-29  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Pass
	SLP_TREE_VECTYPE to record_stmt_cost.

2020-10-29  Martin Liska  <mliska@suse.cz>

	* optc-gen.awk: Check that params start with -param=.
	* params.opt: Fix ipa-jump-function-lookups.

2020-10-29  Alexandre Oliva  <oliva@adacore.com>

	* tree-ssa-math-opts.c (sincos_stats): Add conv_removed.
	(execute_cse_conv_1): New.
	(execute_cse_sincos_1): Call it.  Fix return within
	FOR_EACH_IMM_USE_STMT.
	(pass_cse_sincos::execute): Report conv_inserted.

2020-10-29  Xuepeng Guo  <xuepeng.guo@intel.com>
	    Hongyu Wang  <hongyu.wang@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Detect KL, AESKLE and WIDEKL features.
	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_KL_SET): New.
	(OPTION_MASK_ISA_WIDEKL_SET): Likewise.
	(OPTION_MASK_ISA_KL_UNSET): Likewise.
	(OPTION_MASK_ISA_WIDEKL_UNSET): Likewise.
	(OPTION_MASK_ISA2_AVX2_UNSET): Likewise.
	(OPTION_MASK_ISA2_AVX_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE4_2_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE4_1_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE4_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSSE3_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE3_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE2_UNSET): Likewise.
	(OPTION_MASK_ISA2_SSE_UNSET): Likewise.
	(ix86_handle_option): Handle kl and widekl, add dependency chain
	for KL and SSE2.
	* common/config/i386/i386-cpuinfo.h (enum processor_features):
	(FEATURE_KL, FEATURE_AESKLE, FEATURE_WIDEKL): New.
	* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
	for KL, AESKLE and WIDEKL.
	* config.gcc: Add keylockerintrin.h.
	* doc/invoke.texi: Document new option -mkl and -mwidekl.
	* doc/extend.texi: Document kl and widekl.
	* config/i386/cpuid.h (bit_KL, bit_AESKLE, bit_WIDEKL): New.
	* config/i386/i386-builtin-types.def ((UINT, UINT, V2DI, V2DI, PVOID),
	(UINT, UINT, V2DI, PVOID), (VOID, V2DI, V2DI, V2DI, UINT),
	(UINT8, PV2DI, V2DI, PCVOID), (UINT8, PV2DI, PCV2DI, PCVOID)): New
	function types.
	* config/i386/i386-builtin.def: Add
	__builtin_ia32_loadiwkey,
	__builtin_ia32_aesdec128kl_u8,
	__builtin_ia32_aesdec256kl_u8,
	__builtin_ia32_aesenc128kl_u8,
	__builtin_ia32_aesenc256kl_u8,
	__builtin_ia32_aesdecwide128kl_u8,
	__builtin_ia32_aesdecwide256kl_u8,
	__builtin_ia32_aesencwide128kl_u8,
	__builtin_ia32_aesencwide256kl_u8,
	__builtin_ia32_encodekey128_u32,
	__builtin_ia32_encodekey256_u32.
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	kl and widekl.
	* config/i386/i386-options.c (isa2_opts): Add -mkl and -mwidekl.
	(ix86_option_override_internal): Handle KL and WIDEKL.
	(ix86_valid_target_attribute_inner_p): Add attribute for kl and widekl.
	* config/i386/i386-expand.c
	(ix86_expand_builtin): Expand Keylocker Builtins.
	* config/i386/i386.h (TARGET_KL): New.
	(TARGET_KL_P): Likewise.
	(TARGET_WIDEKL): Likewise.
	(TARGET_WIDEKL_P): Likewise.
	(PTA_KL): Likewise.
	(PTA_WIDEKL): Likewise.
	(PTA_TIGERLAKE): Add PTA_KL, PTA_WIDEKL.
	(PTA_ALDERLAKE): Likewise.
	* config/i386/i386.opt: Add new option mkl and mwidekl.
	* config/i386/keylockerintrin.h: New header file for Keylocker.
	* config/i386/immintrin.h: Include keylockerintrin.h.
	* config/i386/predicates.md (encodekey128_operation): New
	predicate.
	(encodekey256_operation): Likewise.
	(aeswidekl_operation): Likewise.
	* config/i386/sse.md (UNSPECV_LOADIWKEY): New.
	(UNSPECV_AESDEC128KLU8): Likewise.
	(UNSPECV_AESENC128KLU8): Likewise.
	(UNSPECV_AESDEC256KLU8): Likewise.
	(UNSPECV_AESENC256KLU8): Likewise.
	(UNSPECV_AESDECWIDE128KLU8): Likewise.
	(UNSPECV_AESENCWIDE128KLU8): Likewise.
	(UNSPECV_AESDECWIDE256KLU8): Likewise.
	(UNSPECV_AESENCWIDE256KLU8): Likewise.
	(UNSPECV_ENCODEKEY128U32): Likewise.
	(UNSPECV_ENCODEKEY256U32): Likewise.
	(encodekey128u32): New expander.
	(encodekey256u32): Likewise.
	(aes<aeswideklvariant>u8): Likewise.
	(loadiwkey): New insn pattern.
	(*encodekey128u32): Likewise.
	(*encodekey256u32): Likewise.
	(aes<aesklvariant>u8): Likewise.
	(*aes<aeswideklvariant>u8): Likewise.

2020-10-29  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): Allow splatting
	not vectorizable loads.
	(vect_build_slp_instance): Amend dumping with address.
	(vect_slp_convert_to_external): Likewise.

2020-10-29  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97609
	* gimple-range-cache.cc (non_null_ref::process_name): Call
	infer_nonnull_range directly instead of infer_value_range.

2020-10-29  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (ANALYZER_OBJS): Add analyzer/complexity.o.

2020-10-28  Marek Polacek  <polacek@redhat.com>

	PR c++/97573
	* doc/invoke.texi: Document -Wdeprecated-enum-enum-conversion
	and -Wdeprecated-enum-float-conversion.  -Wenum-conversion is
	no longer C/ObjC only.

2020-10-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/97457
	* value-range.cc (irange::set): Don't decay POLY_INT_CST ranges
	to integer ranges.

2020-10-28  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md(xxgenpcvm_<mode>_internal): Remove TARGET_64BIT.

2020-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_slp_analyze_node_operations_1): Dump
	when shared vectype update fails.

2020-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): For skipped
	args just push NULLs and vect_uninitialized_def.
	(vect_build_slp_tree_2): Allocate skip_args for all ops
	and pass it down to vect_get_and_check_slp_defs.

2020-10-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97615
	* tree-vect-slp.c (vect_build_slp_tree_2): Do not build
	an external from pattern defs.

2020-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_optimize_slp): Fix iteration over
	all loads.

2020-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_instance): Split the store
	group at the failure boundary and also re-analyze a large enough
	matching rest.

2020-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_slp_analyze_node_alignment):
	Dump when vect_update_shared_vectype fails.

2020-10-28  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/arm_neon.h (__ST2_LANE_FUNC, __ST3_LANE_FUNC)
	(__ST4_LANE_FUNC): Rename the macro generating the 'q' variants
	into __ST2Q_LANE_FUNC, __ST2Q_LANE_FUNC, __ST2Q_LANE_FUNC so they
	all can be undefed at the and of the file.
	(vst2_lane_bf16, vst2q_lane_bf16, vst3_lane_bf16, vst3q_lane_bf16)
	(vst4_lane_bf16, vst4q_lane_bf16): Add new intrinsics.

2020-10-28  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/arm_neon.h (__LD2_LANE_FUNC, __LD3_LANE_FUNC)
	(__LD4_LANE_FUNC): Rename the macro generating the 'q' variants
	into __LD2Q_LANE_FUNC, __LD2Q_LANE_FUNC, __LD2Q_LANE_FUNC so they
	all can be undefed at the and of the file.
	(vld2_lane_bf16, vld2q_lane_bf16, vld3_lane_bf16, vld3q_lane_bf16)
	(vld4_lane_bf16, vld4q_lane_bf16): Add new intrinsics.

2020-10-28  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_ALLOCATE.
	* tree.h (OMP_CLAUSE_ALLOCATE_ALLOCATOR,
	OMP_CLAUSE_ALLOCATE_COMBINED): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add allocate
	clause.
	(walk_tree_1): Handle OMP_CLAUSE_ALLOCATE.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses,
	gimplify_omp_for): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* omp-low.c (scan_sharing_clauses): Likewise.

2020-10-28  Jakub Jelinek  <jakub@redhat.com>

	* omp-offload.c (omp_declare_target_tgt_fn_r): Handle direct calls to
	declare variant base functions.

2020-10-28  Jakub Jelinek  <jakub@redhat.com>

	PR lto/96680
	* lto-streamer.h (omp_lto_output_declare_variant_alt,
	omp_lto_input_declare_variant_alt): Declare variant.
	* symtab.c (symtab_node::get_partitioning_class): Return
	SYMBOL_DUPLICATE for declare_variant_alt nodes.
	* passes.c (ipa_write_summaries): Add declare_variant_alt to
	partition.
	* lto-cgraph.c (output_refs): Call omp_lto_output_declare_variant_alt
	on declare_variant_alt nodes.
	(input_refs): Call omp_lto_input_declare_variant_alt on
	declare_variant_alt nodes.
	* lto-streamer-out.c (output_function): Don't call
	collect_block_tree_leafs if DECL_INITIAL is error_mark_node.
	(lto_output): Call output_function even for declare_variant_alt
	nodes.
	* omp-general.c (omp_lto_output_declare_variant_alt,
	omp_lto_input_declare_variant_alt): New functions.

2020-10-28  Jakub Jelinek  <jakub@redhat.com>

	* wide-int.cc (wi::set_bit_large): Call canonize unless setting
	msb bit and clearing bits above it.

2020-10-28  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range-gori.cc (gori_compute_cache::cache_stmt): Accumulate
	return values and only set cache when everything returned true.
	* gimple-range.cc (get_tree_range): Set the return range to UNDEFINED
	when the range isn't supported.
	(gimple_ranger::calc_stmt): Return varying if the type is supported,
	even if the stmt processing failed.  False otherwise.
	(range_of_builtin_ubsan_call): Don't use gcc_assert.
	(range_of_builtin_call): Ditto.
	(gimple_ranger::range_of_cond_expr): Ditto.
	(gimple_ranger::range_of_expr): Ditto
	(gimple_ranger::range_on_entry): Ditto.
	(gimple_ranger::range_on_exit): Ditto.
	(gimple_ranger::range_on_edge): DItto.
	(gimple_ranger::range_of_stmt): Don't use gcc_assert, and initialize
	return value to UNDEFINED.

2020-10-27  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR rtl-optimization/97497
	* config/s390/s390.c (s390_hard_regno_call_part_clobbered): Do not
	return true for r12 when -fpic is used.

2020-10-27  Tamar Christina  <tamar.christina@arm.com>

	PR target/97535
	* config/aarch64/aarch64.c (aarch64_expand_cpymem): Use unsigned
	arithmetic in check.

2020-10-27  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/arm_neon.h (vcopy_lane_bf16, vcopyq_lane_bf16)
	(vcopyq_laneq_bf16, vcopy_laneq_bf16): New intrinsics.

2020-10-27  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (VX_CPU_PREFIX): #define here.
	* config/rs6000/vxworks.h: Remove #definition.

2020-10-27  Olivier Hainque  <hainque@adacore.com>

	* config/rs6000/vxworks.h (CPP_SPEC): Fix macro definition
	for -mcpu=e6500.

2020-10-27  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_instance): Use ceil_log2
	to compute maximum group-size.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	PR ipa/97586
	* ipa-modref-tree.h (modref_tree::remap_params): New member function.
	* ipa-modref.c (modref_summaries_lto::duplicate): Check that
	optimization summaries are not duplicated.
	(remap_arguments): Remove.
	(modref_transform): Rename to ...
	(update_signature): ... this one; handle also lto summary.
	(pass_ipa_modref::execute): Update signatures here rather
	than in transform hook.

2020-10-27  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_slp_bbs): Remove no-op
	slp-max-insns-in-bb check.
	(vect_slp_function): Dump when splitting the function.
	Adjust the split condition for control altering stmts.
	* params.opt (-param=slp-max-insns-in-bb): Remove.
	* doc/invoke.texi (-param=slp-max-insns-in-bb): Likewise.

2020-10-27  Richard Biener  <rguenther@suse.de>

	* gimple.h (gimple_expr_type): For PHIs return the type
	of the result.
	* tree-vect-loop-manip.c (slpeel_tree_duplicate_loop_to_edge_cfg):
	Make sure edge order into copied loop headers line up with the
	originals.
	* tree-vect-loop.c (vect_transform_cycle_phi): Handle nested
	loops with SLP.
	(vectorizable_phi): New function.
	(vectorizable_live_operation): For BB vectorization compute insert
	location here.
	* tree-vect-slp.c (vect_free_slp_tree): Deal with NULL
	SLP_TREE_CHILDREN entries.
	(vect_create_new_slp_node): Add overloads with pre-existing node
	argument.
	(vect_print_slp_graph): Likewise.
	(vect_mark_slp_stmts): Likewise.
	(vect_mark_slp_stmts_relevant): Likewise.
	(vect_gather_slp_loads): Likewise.
	(vect_optimize_slp): Likewise.
	(vect_slp_analyze_node_operations): Likewise.
	(vect_bb_slp_scalar_cost): Likewise.
	(vect_remove_slp_scalar_calls): Likewise.
	(vect_get_and_check_slp_defs): Handle PHIs.
	(vect_build_slp_tree_1): Handle PHIs.
	(vect_build_slp_tree_2): Continue SLP build, following PHI
	arguments.  Fix memory leak.
	(vect_build_slp_tree): Put stub node into the hash-map so
	we can discover cycles directly.
	(vect_build_slp_instance): Set the backedge SLP def for
	reduction chains.
	(vect_analyze_slp_backedges): Remove.
	(vect_analyze_slp): Do not call it.
	(vect_slp_convert_to_external): Release SLP_TREE_LOAD_PERMUTATION.
	(vect_slp_analyze_node_operations): Handle stray failed
	backedge defs by failing.
	(vect_slp_build_vertices): Adjust leaf condition.
	(vect_bb_slp_mark_live_stmts): Handle PHIs, use visited
	hash-set to handle cycles.
	(vect_slp_analyze_operations): Adjust.
	(vect_bb_partition_graph_r): Likewise.
	(vect_slp_function): Adjust split condition to allow CFG
	merges.
	(vect_schedule_slp_instance): Rename to ...
	(vect_schedule_slp_node): ... this.  Move DFS walk to ...
	(vect_schedule_scc): ... this new function.
	(vect_schedule_slp): Call it.  Remove ad-hoc vectorized
	backedge fill code.
	* tree-vect-stmts.c (vect_analyze_stmt): Call
	vectorizable_phi.
	(vect_transform_stmt): Likewise.
	(vect_is_simple_use): Handle vect_backedge_def.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Only
	set loop header PHIs to vect_unknown_def_type for loop
	vectorization.
	* tree-vectorizer.h (enum vect_def_type): Add vect_backedge_def.
	(enum stmt_vec_info_type): Add phi_info_type.
	(vectorizable_phi): Declare.

2020-10-27  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): When vectorizing
	BBs splat uniform operands and stop SLP discovery.

2020-10-27  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
	Remove.
	* config/glibc-d.c (glibc_d_critsec_size): Likewise.
	(TARGET_D_CRITSEC_SIZE): Likewise.
	* config/i386/linux-common.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
	Likewise.
	* config/sol2-d.c (solaris_d_critsec_size): Likewise.
	(TARGET_D_CRITSEC_SIZE):  Likewise.
	* doc/tm.texi.in (TARGET_D_CRITSEC_SIZE): Likewise.
	* doc/tm.texi: Regenerate.

2020-10-27  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/97461
	* gcov-io.h (GCOV_PREALLOCATED_KVP): Pre-allocate 64
	static counters.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (attr_fnspec::verify): Re-enabl checking.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	* builtin-attrs.def (STRERRNOC): New macro.
	(STRERRNOP): New macro.
	(ATTR_ERRNOCONST_NOTHROW_LEAF_LIST): New attr list.
	(ATTR_ERRNOPURE_NOTHROW_LEAF_LIST): New attr list.
	* builtins.def (ATTR_MATHFN_ERRNO): Use
	ATTR_ERRNOCONST_NOTHROW_LEAF_LIST.
	(ATTR_MATHFN_FPROUNDING_ERRNO): Use ATTR_ERRNOCONST_NOTHROW_LEAF_LIST
	or ATTR_ERRNOPURE_NOTHROW_LEAF_LIST.

2020-10-27  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (opt_var_ref_t): New.
	(riscv_ext_flag_table_t): New.
	(riscv_ext_flag_table): New.
	(riscv_parse_arch_string): Pass gcc_options* instead of
	&opts->x_target_flags only, and using riscv_arch_option_table to
	setup flags.
	(riscv_handle_option): Update argument for riscv_parse_arch_string.
	(riscv_expand_arch): Ditto.
	(riscv_expand_arch_from_cpu): Ditto.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-ccp.c (evaluate_stmt): Use EAF_RETURN_ARG; do not handle
	string buitings specially.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	* tree.c (set_call_expr_flags): Fix string for ECF_RET1.
	(build_common_builtin_nodes): Do not set ECF_RET1 for memcpy, memmove,
	and memset. They are handled by builtin_fnspec.

2020-10-27  Jan Hubicka  <jh@suse.cz>

	* builtins.c (builtin_fnspec): Add bzero, memcmp, memcmp_eq, bcmp,
	strncmp, strncmp_eq, strncasecmp, rindex, strlen, strlnen, strcasecmp,
	strcspn, strspn, strcmp, strcmp_eq.

2020-10-27  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (slp_tree_pool): Declare.
	(_slp_tree::operator new): Likewise.
	(_slp_tree::operator delete): Likewise.
	* tree-vectorizer.c (vectorize_loops): Allocate and free the
	slp_tree_pool.
	(pass_slp_vectorize::execute): Likewise.
	* tree-vect-slp.c (slp_tree_pool): Define.
	(_slp_tree::operator new): Likewise.
	(_slp_tree::operator delete): Likewise.

2020-10-27  Martin Liska  <mliska@suse.cz>

	* lto-wrapper.c (run_gcc): Do not use sub-make when jobserver is
	not detected properly.

2020-10-27  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (call_summary_base): Pass symtab hooks to
	base and register (or unregister) hooks directly.

2020-10-27  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (function_summary_base::unregister_hooks):
	Call disable_insertion_hook and disable_duplication_hook.
	(function_summary_base::symtab_insertion): New field.
	(function_summary_base::symtab_removal): Likewise.
	(function_summary_base::symtab_duplication): Likewise.
	Register hooks in function_summary_base and directly register
	(or unregister) hooks.

2020-10-26  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97567
	* gimple-range-gori.cc (gori_compute::logical_combine): Union the
	ranges of operand1 and operand2, not intersect.

2020-10-26  Jan Hubicka  <jh@suse.cz>

	* attr-fnspec.h: Update toplevel comment.
	(attr_fnspec::attr_fnspec): New constructor.
	(attr_fnspec::arg_read_p,
	attr_fnspec::arg_written_p,
	attr_fnspec::arg_access_size_given_by_arg_p,
	attr_fnspec::arg_single_access_p
	attr_fnspec::loads_known_p
	attr_fnspec::stores_known_p,
	attr_fnspec::clobbers_errno_p): New member functions.
	(gimple_call_fnspec): Declare.
	(builtin_fnspec): Declare.
	* builtins.c: Include attr-fnspec.h
	(builtin_fnspec): New function.
	* builtins.def (BUILT_IN_MEMCPY): Do not specify RET1 fnspec.
	(BUILT_IN_MEMMOVE): Do not specify RET1 fnspec.
	(BUILT_IN_MEMSET): Do not specify RET1 fnspec.
	(BUILT_IN_STRCAT): Do not specify RET1 fnspec.
	(BUILT_IN_STRCPY): Do not specify RET1 fnspec.
	(BUILT_IN_STRNCAT): Do not specify RET1 fnspec.
	(BUILT_IN_STRNCPY): Do not specify RET1 fnspec.
	(BUILT_IN_MEMCPY_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_MEMMOVE_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_MEMSET_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_STRCAT_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_STRCPY_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_STRNCAT_CHK): Do not specify RET1 fnspec.
	(BUILT_IN_STRNCPY_CHK): Do not specify RET1 fnspec.
	* gimple.c (gimple_call_fnspec): Return attr_fnspec.
	(gimple_call_arg_flags): Update.
	(gimple_call_return_flags): Update.
	* tree-ssa-alias.c (check_fnspec): New function.
	(ref_maybe_used_by_call_p_1): Use fnspec for builtin handling.
	(call_may_clobber_ref_p_1): Likewise.
	(attr_fnspec::verify): Update verifier.
	* calls.c (decl_fnspec): New function.
	(decl_return_flags): Use it.

2020-10-26  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97555
	* range-op.cc (range_tests): Test 1-bit signed invert.
	* value-range.cc (subtract_one): Adjust comment.
	(add_one): New.
	(irange::invert): Call add_one.

2020-10-26  Jan Hubicka  <jh@suse.cz>

	* cgraph.h (cgraph_node::optimize_for_size_p): Return
	optimize_size_level.
	(cgraph_node::optimize_for_size_p): Update.
	* coretypes.h (enum optimize_size_level): New enum.
	* predict.c (unlikely_executed_edge_p): Microoptimize.
	(optimize_function_for_size_p): Return optimize_size_level.
	(optimize_bb_for_size_p): Likewise.
	(optimize_edge_for_size_p): Likewise.
	(optimize_insn_for_size_p): Likewise.
	(optimize_loop_nest_for_size_p): Likewise.
	* predict.h (optimize_function_for_size_p): Update declaration.
	(optimize_bb_for_size_p): Update declaration.
	(optimize_edge_for_size_p): Update declaration.
	(optimize_insn_for_size_p): Update declaration.
	(optimize_loop_for_size_p): Update declaration.
	(optimize_loop_nest_for_size_p): Update declaration.

2020-10-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (enum slp_instance_kind): New.
	(vect_build_slp_instance): Split out from...
	(vect_analyze_slp_instance): ... this.

2020-10-26  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range.cc (range_of_builtin_call): Initialize zerov to 0.

2020-10-26  Jan Hubicka  <jh@suse.cz>

	PR ipa/97576
	* cgraphclones.c (cgraph_node::materialize_clone): Clear stmt
	references.
	* cgraphunit.c (mark_functions_to_output): Do not clear them here.
	* ipa-inline-transform.c (inline_transform): Clear stmt references.
	* symtab.c (symtab_node::clear_stmts_in_references): Make recursive
	for clones.
	* tree-ssa-structalias.c (ipa_pta_execute): Do not clear references.

2020-10-26  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-builtins.c: Add FLAG STORE.
	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for store intrinsics.

2020-10-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR tree-optimization/97546
	* gimple-ssa-store-merging.c (find_bswap_or_nop): Return NULL if
	type is not INTEGER_CST.

2020-10-26  Richard Biener  <rguenther@suse.de>

	PR middle-end/97521
	* expr.c (const_scalar_mask_from_tree): Remove.
	(expand_expr_real_1): Always VIEW_CONVERT integer mode
	vector constants to an integer type.
	* tree.c (build_truth_vector_type_for_mode): Use a single-bit
	boolean component type for non-vector-mode mask_mode.

2020-10-26  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95458
	* config/i386/i386-expand.c (ix86_expand_cmpstrn_or_cmpmem):
	Return false for -mno-inline-all-stringops.

2020-10-26  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95151
	* config/i386/i386-expand.c (ix86_expand_cmpstrn_or_cmpmem): New
	function.
	* config/i386/i386-protos.h (ix86_expand_cmpstrn_or_cmpmem): New
	prototype.
	* config/i386/i386.md (cmpmemsi): New pattern.

2020-10-26  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md ("vcond_mask_<mode><mode>"): New expander.

2020-10-26  Richard Biener  <rguenther@suse.de>

	* sbitmap.c (sbitmap_vector_alloc): Use size_t for byte
	quantities to avoid overflow.

2020-10-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97539
	* tree-vect-loop-manip.c (vect_do_peeling): Reset out-of-loop
	debug uses before peeling.

2020-10-26  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.h (struct cgraph_node): Make ipa_transforms_to_apply vl_ptr.
	* ipa-inline-analysis.c (initialize_growth_caches): Disable insertion
	and duplication hooks.
	* ipa-inline-transform.c (clone_inlined_nodes): Clear
	ipa_transforms_to_apply.
	(save_inline_function_body): Disable insertion hoook for
	ipa_saved_clone_sources.
	* ipa-prop.c (ipcp_transformation_initialize): Disable insertion hook.
	* ipa-prop.h (ipa_node_params_t): Disable insertion hook.
	* ipa-reference.c (propagate): Disable insertion hoook.
	* ipa-sra.c (ipa_sra_summarize_function): Move out of anonymous
	namespace.
	(ipa_sra_function_summaries::insert): New virtual function.
	* passes.c (execute_one_pass): Do not add transforms to inline clones.
	* symbol-summary.h (function_summary_base): Make insert and duplicate
	hooks fail instead of silently producing empty summaries; add way to
	disable duplication hooks
	(call_summary_base): Likewise.
	* tree-nested.c (nested_function_info::get_create): Disable insertion
	hooks
	(maybe_record_nested_function): Likewise.

2020-10-26  Xionghu Luo  <luoxhu@linux.ibm.com>

	* cfg.c (debug_bb): New overloaded function.
	(debug_bb_n): New overloaded function.
	* cfg.h (debug_bb): New declaration.
	(debug_bb_n): New declaration.
	* print-rtl.c (debug_bb_slim): Call debug_bb with flags.

2020-10-24  H.J. Lu  <hjl.tools@gmail.com>

	PR bootstrap/97451
	* configure.ac (HAVE_AS_WORKING_DWARF_4_FLAG): Renamed to ...
	(HAVE_AS_WORKING_DWARF_N_FLAG): This.  Don't define if there is
	an extra assembly input file in debug info.  Replace success
	with dwarf4_success in the 32-bit --gdwarf-4 check.
	* dwarf2out.c (asm_outputs_debug_line_str): Check
	HAVE_AS_WORKING_DWARF_N_FLAG instead of
	HAVE_AS_WORKING_DWARF_4_FLAG.
	* gcc.c (ASM_DEBUG_SPEC): Likewise.
	(ASM_DEBUG_OPTION_SPEC): Likewise.
	* config.in: Regenerated.
	* configure: Likewise.

2020-10-24  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97538
	* calls.c (get_size_range): Handle undefined ranges.

2020-10-24  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::former_thunk_p): Move out of CHECKING_P
	macro.

2020-10-24  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Limit
	AND addressing to just lvx/stvx style addresses.

2020-10-24  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.md (cstore<mode>4): Don't call
	rs6000_emit_int_cmove for power10 when -mno-isel.

2020-10-23  Jan Hubicka  <hubicka@ucw.cz>

	* Makefile.in: Add symtab-thunks.o
	(GTFILES): Add symtab-thunks.h and symtab-thunks.cc; remove cgraphunit.c
	* cgraph.c: Include symtab-thunks.h.
	(cgraph_node::create_thunk): Update
	(symbol_table::create_edge): Update
	(cgraph_node::dump): Update
	(cgraph_node::call_for_symbol_thunks_and_aliases): Update
	(set_nothrow_flag_1): Update
	(set_malloc_flag_1): Update
	(set_const_flag_1): Update
	(collect_callers_of_node_1): Update
	(clone_of_p): Update
	(cgraph_node::verify_node): Update
	(cgraph_node::function_symbol): Update
	(cgraph_c_finalize): Call thunk_info::release.
	(cgraph_node::has_thunk_p): Update
	(cgraph_node::former_thunk_p): Move here from cgraph.h; reimplement.
	* cgraph.h (struct cgraph_thunk_info): Rename to symtab-thunks.h.
	(cgraph_node): Remove thunk field; add thunk bitfield.
	(cgraph_node::expand_thunk): Move to symtab-thunks.h
	(symtab_thunks_cc_finalize): Declare.
	(cgraph_node::has_gimple_body_p): Update.
	(cgraph_node::former_thunk_p): Update.
	* cgraphclones.c: Include symtab-thunks.h.
	(duplicate_thunk_for_node): Update.
	(cgraph_edge::redirect_callee_duplicating_thunks): Update.
	(cgraph_node::expand_all_artificial_thunks): Update.
	(cgraph_node::create_edge_including_clones): Update.
	* cgraphunit.c: Include symtab-thunks.h.
	(vtable_entry_type): Move to symtab-thunks.c.
	(cgraph_node::analyze): Update.
	(analyze_functions): Update.
	(mark_functions_to_output): Update.
	(thunk_adjust): Move to symtab-thunks.c
	(cgraph_node::expand_thunk): Move to symtab-thunks.c
	(cgraph_node::assemble_thunks_and_aliases): Update.
	(output_in_order): Update.
	(cgraphunit_c_finalize): Do not clear vtable_entry_type.
	(cgraph_node::create_wrapper): Update.
	* gengtype.c (open_base_files): Add symtab-thunks.h
	* ipa-comdats.c (propagate_comdat_group): UPdate.
	(ipa_comdats): Update.
	* ipa-cp.c (determine_versionability): UPdate.
	(gather_caller_stats): Update.
	(count_callers): Update
	(set_single_call_flag): Update
	(initialize_node_lattices): Update
	(call_passes_through_thunk_p): Update
	(call_passes_through_thunk): Update
	(propagate_constants_across_call): Update
	(find_more_scalar_values_for_callers_subset): Update
	(has_undead_caller_from_outside_scc_p): Update
	* ipa-fnsummary.c (evaluate_properties_for_edge): Update.
	(compute_fn_summary): Update.
	(inline_analyze_function): Update.
	* ipa-icf.c: Include symtab-thunks.h.
	(sem_function::equals_wpa): Update.
	(redirect_all_callers): Update.
	(sem_function::init): Update.
	(sem_function::parse): Update.
	* ipa-inline-transform.c: Include symtab-thunks.h.
	(inline_call): Update.
	(save_inline_function_body): Update.
	(preserve_function_body_p): Update.
	* ipa-inline.c (inline_small_functions): Update.
	* ipa-polymorphic-call.c: Include alloc-pool.h, symbol-summary.h,
	symtab-thunks.h
	(ipa_polymorphic_call_context::ipa_polymorphic_call_context): Update.
	* ipa-pure-const.c: Include symtab-thunks.h.
	(analyze_function): Update.
	* ipa-sra.c (check_for_caller_issues): Update.
	* ipa-utils.c (ipa_reverse_postorder): Update.
	(ipa_merge_profiles): Update.
	* ipa-visibility.c (non_local_p): Update.
	(cgraph_node::local_p): Update.
	(function_and_variable_visibility): Update.
	* ipa.c (symbol_table::remove_unreachable_nodes): Update.
	* lto-cgraph.c: Include alloc-pool.h, symbol-summary.h and
	symtab-thunks.h
	(lto_output_edge): Update.
	(lto_output_node): Update.
	(compute_ltrans_boundary): Update.
	(output_symtab): Update.
	(verify_node_partition): Update.
	(input_overwrite_node): Update.
	(input_node): Update.
	* lto-streamer-in.c (fixup_call_stmt_edges): Update.
	* symtab-thunks.cc: New file.
	* symtab-thunks.h: New file.
	* toplev.c (toplev::finalize): Call symtab_thunks_cc_finalize.
	* trans-mem.c (ipa_tm_mayenterirr_function): Update.
	(ipa_tm_execute): Update.
	* tree-inline.c (expand_call_inline): Update.
	* tree-nested.c (create_nesting_tree): Update.
	(convert_all_function_calls): Update.
	(gimplify_all_functions): Update.
	* tree-profile.c (tree_profiling): Update.
	* tree-ssa-structalias.c (associate_varinfo_to_alias): Update.
	* tree.c (free_lang_data_in_decl): Update.
	* value-prof.c (init_node_map): Update.

2020-10-23  Marek Polacek  <polacek@redhat.com>

	PR c++/91741
	* doc/invoke.texi: Document -Wsizeof-array-div.

2020-10-23  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97552
	* attribs.c (init_attr_rdwr_indices): Handle static VLA parameters.

2020-10-23  Douglas Rupp  <rupp@adacore.com>

	* config/vxworks.h (VXWORKS_NET_LIBS_RTP): Use -lrtnet if
	rtnetStackLib.h is available,fallback to -lnet otherwise.

2020-10-23  Douglas Rupp  <rupp@adacore.com>

	* gcc.c (if-exists-then-else): New built-in spec function.
	* doc/invoke.texi: Document it.

2020-10-23  Tulio Magno Quites Machado Filho  <tuliom@linux.ibm.com>

	* doc/extend.texi (PowerPC Built-in Functions): Replace
	extraneous characters with whitespace.

2020-10-23  Martin Liska  <mliska@suse.cz>

	* gcov.c (read_count_file): Never call gcov_sync with a negative
	value.

2020-10-23  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (PLUGIN_HEADERS): Add gomp-constants.h and $(EXPR_H).
	(s-header-vars): Accept not just spaces but also tabs between *_H name
	and =.  Handle common/config/ headers similarly to config.  Don't
	throw away everything from first ... to last / on the remaining
	string, instead skip just ... to corresponding last / without
	intervening spaces and tabs.
	(install-plugin): Treat common/config headers like config headers.
	* config/i386/t-i386 (TM_H): Add
	$(srcdir)/common/config/i386/i386-cpuinfo.h.

2020-10-23  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97164
	* stor-layout.c (layout_type): Also reject arrays where element size
	is constant, but not a multiple of element alignment.

2020-10-23  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-loop-ivopts.c (analyze_and_mark_doloop_use): Bail out if
	the loop is subject to a pragma Unroll with no specific count.

2020-10-23  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/mve.md (mve_vsubq<mode>): New entry for vsub instruction
	using expression 'minus'.
	(mve_vsubq_f<mode>): Use minus instead of VSUBQ_F unspec.
	* config/arm/neon.md (sub<mode>3, sub<mode>3_fp16): Removed.
	(neon_vsub<mode>): Use gen_sub<mode>3 instead of gen_sub<mode>3_fp16.
	* config/arm/vec-common.md (sub<mode>3): Use the new mode macros
	ARM_HAVE_<MODE>_ARITH. Use iterator VDQ instead of VALL.

2020-10-23  Martin Liska  <mliska@suse.cz>

	PR lto/97524
	* lto-wrapper.c (make_exists): New function.
	(run_gcc): Use it to check that make is present and working
	for parallel execution.

2020-10-23  Richard Biener  <rguenther@suse.de>

	Revert:
	2020-10-22  Richard Biener  <rguenther@suse.de>

	PR middle-end/97521
	* expr.c (expand_expr_real_1): Be more careful when
	expanding a VECTOR_BOOLEAN_TYPE_P VECTOR_CSTs.

2020-10-23  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-loop.c (vect_transform_loop): Remove the redundant
	LOOP_VINFO_FULLY_MASKED_P check.

2020-10-23  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/mve.md (mve_vsubq<mode>): New entry for vsub instruction
	using expression 'minus'.
	(mve_vsubq_f<mode>): Use minus instead of VSUBQ_F unspec.
	* config/arm/neon.md (sub<mode>3, sub<mode>3_fp16): Removed.
	(neon_vsub<mode>): Use gen_sub<mode>3 instead of gen_sub<mode>3_fp16.
	* config/arm/vec-common.md (sub<mode>3): Use the new mode macros
	ARM_HAVE_<MODE>_ARITH. Use iterator VDQ instead of VALL.

2020-10-22  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_emit_xxspltidp_v2df): Delete
	debug printf.  Remove trailing ".\n" from inform message.
	Break long line.

2020-10-22  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-range-gori.cc (is_gimple_logical_p): Use types_compatible_p
	for logical compatibility.
	(logical_stmt_cache::cacheable_p): Ditto.

2020-10-22  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_node::get_untransformed_body): Perform lazy
	clone materialization.
	* cgraph.h (cgraph_node::materialize_clone): Declare.
	(symbol_table::materialize_all_clones): Remove.
	* cgraphclones.c (cgraph_materialize_clone): Turn to ...
	(cgraph_node::materialize_clone): .. this one; move here
	dumping from symbol_table::materialize_all_clones.
	(symbol_table::materialize_all_clones): Remove.
	* cgraphunit.c (mark_functions_to_output): Clear stmt references.
	(cgraph_node::expand): Initialize bitmaps early;
	do not call execute_all_ipa_transforms if there are no transforms.
	* ipa-inline-transform.c (save_inline_function_body): Fix formating.
	(inline_transform): Materialize all clones before function is modified.
	* ipa-param-manipulation.c (ipa_param_adjustments::modify_call):
	Materialize clone if needed.
	* ipa.c (class pass_materialize_all_clones): Remove.
	(make_pass_materialize_all_clones): Remove.
	* passes.c (execute_all_ipa_transforms): Materialize all clones.
	* passes.def: Remove pass_materialize_all_clones.
	* tree-pass.h (make_pass_materialize_all_clones): Remove.
	* tree-ssa-structalias.c (ipa_pta_execute): Clear refs.

2020-10-22  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/altivec.h (vec_xl_zext, vec_xl_sext, vec_xst_trunc):
	New defines.
	* config/rs6000/rs6000-builtin.def (BU_P10V_OVERLOAD_X): New builtin
	macro.
	(BU_P10V_AV_X): New builtin macro.
	(se_lxvrhbx, se_lxrbhx, se_lxvrwx, se_lxvrdx): Define internal names
	for load and sign extend vector element.
	(ze_lxvrbx, ze_lxvrhx, ze_lxvrwx, ze_lxvrdx): Define internal names
	for load and zero extend vector element.
	(tr_stxvrbx, tr_stxvrhx, tr_stxvrwx, tr_stxvrdx): Define internal names
	for truncate and store vector element.
	(se_lxvrx, ze_lxvrx, tr_stxvrx): Define internal names for overloaded
	load/store rightmost element.
	* config/rs6000/rs6000-call.c (altivec_builtin_types): Define the
	internal monomorphs P10_BUILTIN_SE_LXVRBX, P10_BUILTIN_SE_LXVRHX,
	P10_BUILTIN_SE_LXVRWX, P10_BUILTIN_SE_LXVRDX,
	P10_BUILTIN_ZE_LXVRBX, P10_BUILTIN_ZE_LXVRHX, P10_BUILTIN_ZE_LXVRWX,
	P10_BUILTIN_ZE_LXVRDX,
	P10_BUILTIN_TR_STXVRBX, P10_BUILTIN_TR_STXVRHX, P10_BUILTIN_TR_STXVRWX,
	P10_BUILTIN_TR_STXVRDX,
	(altivec_expand_lxvr_builtin): New expansion for load element builtins.
	(altivec_expand_stv_builtin): Update to for truncate and store builtins.
	(altivec_expand_builtin): Add clases for load/store rightmost builtins.
	(altivec_init_builtins): Add def_builtin entries for
	__builtin_altivec_se_lxvrbx, __builtin_altivec_se_lxvrhx,
	__builtin_altivec_se_lxvrwx, __builtin_altivec_se_lxvrdx,
	__builtin_altivec_ze_lxvrbx, __builtin_altivec_ze_lxvrhx,
	__builtin_altivec_ze_lxvrwx, __builtin_altivec_ze_lxvrdx,
	__builtin_altivec_tr_stxvrbx, __builtin_altivec_tr_stxvrhx,
	__builtin_altivec_tr_stxvrwx, __builtin_altivec_tr_stxvrdx,
	__builtin_vec_se_lxvrx, __builtin_vec_ze_lxvrx, __builtin_vec_tr_stxvrx.
	* config/rs6000/vsx.md (vsx_lxvr<wd>x, vsx_stxvr<wd>x, vsx_stxvr<wd>x):
	New define_insn entries.
	* doc/extend.texi:  Add documentation for vsx_xl_sext, vsx_xl_zext,
	and vec_xst_trunc.

2020-10-22  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/vsx.md (enum unspec): Add
	UNSPEC_EXTENDDITI2 and UNSPEC_MTVSRD_DITI_W1 entries.
	(mtvsrdd_diti_w1, extendditi2_vector): New define_insns.
	(extendditi2): New define_expand.

2020-10-22  Alexandre Oliva  <oliva@adacore.com>

	* config/i386/mingw-w64.h (TARGET_LIBC_HAS_FUNCTION): Enable
	sincos optimization.

2020-10-22  Alan Modra  <amodra@gmail.com>

	* config/rs6000/vsx.md (vec_cntmb_<mode>, vec_extract_<mode>),
	(vec_expand_<mode>): Replace <VSX_MM_SUFFIX> with <wd>.

2020-10-22  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Refactor so
	computing a vector type early is not needed, for store group
	splitting compute a new vector type based on the desired
	group size.

2020-10-22  Richard Biener  <rguenther@suse.de>

	PR middle-end/97521
	* expr.c (expand_expr_real_1): Be more careful when
	expanding a VECTOR_BOOLEAN_TYPE_P VECTOR_CSTs.

2020-10-22  David Malcolm  <dmalcolm@redhat.com>

	* ipa-modref-tree.c (selftest::test_insert_search_collapse): Fix
	leak.
	(selftest::test_merge): Fix leaks.

2020-10-22  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/97502
	* config/s390/vector.md ("vec_cmp<VI_HW:mode><VI_HW:mode>")
	("vec_cmpu<VI_HW:mode><VI_HW:mode>"): New expanders.

2020-10-22  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR rtl-optimization/97439
	* dfp.c (decimal_real_maxval): Set the sign flag in the
	generated number.

2020-10-22  Martin Liska  <mliska@suse.cz>

	PR c/94722
	* cfgexpand.c (stack_protect_decl_phase):
	Guard with lookup_attribute("no_stack_protector") at
	various places.
	(expand_used_vars): Likewise here.
	* doc/extend.texi: Document no_stack_protector attribute.

2020-10-22  Martin Liska  <mliska@suse.cz>

	* cfgexpand.c: Move the enum to ...
	* coretypes.h (enum stack_protector): ... here.
	* function.c (assign_parm_adjust_stack_rtl): Use the stack_protector
	enum.

2020-10-22  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator: Add TODO, import itertools
	and functools.reduce.
	Handle expantion operator.
	(LONG_EXT_PREFIXES): New.
	(arch_canonicalize): Update comment and improve python3
	debuggability/compatibility.
	(add_underline_prefix): New.
	(_expand_combination): Ditto.
	(unique): Ditto.
	(expand_combination): Ditto.

2020-10-22  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssa-phiopt.c (cond_removal_in_popcount_clz_ctz_pattern):
	For CLZ and CTZ tests, use type temporary instead of mode.

2020-10-22  Jakub Jelinek  <jakub@redhat.com>

	* config.gcc (x86_archs): Add samuel-2, nehemiah, c7 and esther.
	(x86_64_archs): Add eden-x2, nano, nano-1000, nano-2000, nano-3000,
	nano-x2, eden-x4, nano-x4, x86-64-v2, x86-64-v3 and x86-64-v4.
	(i[34567]86-*-* | x86_64-*-*): Only allow x86-64-v* as argument
	to --with-arch_64=.

2020-10-22  Jan Hubicka  <jh@suse.cz>

	* ipa-pure-const.c (funct_state_summary_t::insert): Free stale
	summaries.

2020-10-22  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c: Include tree-nested.h
	(cgraph_node::create): Call maybe_record_nested_function.
	(cgraph_node::remove): Do not remove function from nested function
	infos.
	(cgraph_node::dump): Update.
	(cgraph_node::unnest): Move to tree-nested.c
	(cgraph_node::verify_node): Update.
	(cgraph_c_finalize): Call nested_function_info::release.
	* cgraph.h (struct symtab_node): Remove nested function info.
	* cgraphclones.c (cgraph_node::create_clone): Do not clone nested
	function info.
	* cgraphunit.c (cgraph_node::analyze): Update.
	(cgraph_node::expand): Do not worry about nested functions; they are
	lowered.
	(symbol_table::finalize_compilation_unit): Call
	nested_function_info::release.
	* gimplify.c: Include tree-nested.h
	(unshare_body): Update.
	(unvisit_body): Update.
	* omp-offload.c (omp_discover_implicit_declare_target): Update.
	* tree-nested.c: Include alloc-pool.h, tree-nested.h, symbol-summary.h
	(nested_function_sum): New static variable.
	(nested_function_info::get): New member function.
	(nested_function_info::get_create): New member function.
	(unnest_function): New function.
	(nested_function_info::~nested_function_info): New member function.
	(nested_function_info::release): New function.
	(maybe_record_nested_function): New function.
	(lookup_element_for_decl): Update.
	(check_for_nested_with_variably_modified): Update.
	(create_nesting_tree): Update.
	(unnest_nesting_tree_1): Update.
	(gimplify_all_functions): Update.
	(lower_nested_functions): Update.
	* tree-nested.h (class nested_function_info): New class.
	(maybe_record_nested_function): Declare.
	(unnest_function): Declare.
	(first_nested_function): New inline function.
	(next_nested_function): New inline function.
	(nested_function_origin): New inline function.

2020-10-22  liuhongt  <hongtao.liu@intel.com>

	PR rtl-optimization/97249
	* simplify-rtx.c (simplify_binary_operation_1): Simplify
	vec_select of a subreg of X to a vec_select of X.

2020-10-22  liuhongt  <hongtao.liu@intel.com>

	PR target/87767
	* config/i386/constraints.md ("Br"): New special memory
	constraint.
	* config/i386/i386-expand.c (ix86_binary_operator_ok): Both
	source operand cannot be in memory or bcst_memory_operand.
	* config/i386/i386.c (ix86_print_operand): Print bcst_mem_operand.
	* config/i386/i386.h (VALID_BCST_MODE_P): New.
	* config/i386/predicates.md (bcst_mem_operand): New predicate
	for AVX512 embedding broadcast memory operand.
	(bcst_vector_operand): New predicate, vector_operand or
	bcst_mem_operand.
	* config/i386/sse.md
	(*<plusminus_insn><mode>3<mask_name><round_name>): Extend
	predicate and constraints to handle bcst_mem_operand.
	(*mul<mode>3<mask_name><round_name>): Ditto.
	(<sse>_div<mode>3<mask_name><round_name>): Ditto.
	(<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name><round_name>):
	Ditto.
	(<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name><round_name>):
	Ditto.
	(<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name><round_name>):
	Ditto.
	(<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name><round_name>):
	Ditto.
	(*<plusminus_insn><mode>3): Ditto.
	(avx512dq_mul<mode>3<mask_name>): Ditto.
	(*<sse4_1_avx2>_mul<mode>3<mask_name>): Ditto.
	(*andnot<mode>3): Ditto.
	(<mask_codefor><code><mode>3<mask_name>): Ditto.
	(*sub<mode>3<mask_name>_bcst): Removed.
	(*add<mode>3<mask_name>_bcst): Ditto.
	(*mul<mode>3<mask_name>_bcst): Ditto.
	(*<avx512>_div<mode>3<mask_name>_bcst): Ditto.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1):
	Ditto.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_2):
	Ditto.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_3):
	Ditto.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1):
	Ditto.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_2):
	Ditto.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_3):
	Ditto.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1):
	Ditto.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_2):
	Ditto.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_3):
	Ditto.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1):
	Ditto.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_2):
	Ditto.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_3):
	Ditto.
	(*sub<mode>3_bcst): Ditto.
	(*add<mode>3_bcst): Ditto.
	(*avx512dq_mul<mode>3<mask_name>_bcst): Ditto.
	(*avx512f_mul<mode>3<mask_name>_bcst): Ditto.
	(*andnot<mode>3_bcst): Ditto.
	(*<code><mode>3_bcst): Ditto.
	* config/i386/subst.md (bcst_round_constraint): New subst
	attribute.
	(bcst_round_nimm_predicate): Ditto.
	(bcst_mask_prefix3): Ditto.
	(bcst_mask_prefix4): Ditto.

2020-10-22  liuhongt  <hongtao.liu@intel.com>

	PR target/87767
	* ira-costs.c (record_operand_costs): Extract memory operand
	from recog_data.operand[i] for record_address_regs.
	(record_reg_classes): Extract memory operand from OP for
	conditional judgement MEM_P.
	* ira.c (ira_setup_alts): Ditto.
	* lra-constraints.c (extract_mem_from_operand): New function.
	(satisfies_memory_constraint_p): Extract memory operand from
	OP for decompose_mem_address, return false when there's no
	memory operand inside OP.
	(process_alt_operands): Remove MEM_P (op) since it would be
	judged in satisfies_memory_constraint_p.
	* recog.c (asm_operand_ok): Extract memory operand from OP for
	judgement of memory_operand (OP, VOIDmode).
	(constrain_operands): Don't unwrapper unary operator when
	there's memory operand inside.
	* rtl.h (extract_mem_from_operand): New decl.

2020-10-22  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/mve.md (mve_vmaxq_<supf><mode>): Replace with ...
	(mve_vmaxq_s<mode>, mve_vmaxq_u<mode>): ... these new insns to
	use smax/umax instead of VMAXQ.
	(mve_vminq_<supf><mode>): Replace with ...
	(mve_vminq_s<mode>, mve_vminq_u<mode>): ... these new insns to
	use smin/umin instead of VMINQ.
	(mve_vmaxnmq_f<mode>): Use smax instead of VMAXNMQ_F.
	(mve_vminnmq_f<mode>): Use smin instead of VMINNMQ_F.
	* config/arm/vec-common.md (smin<mode>3): Use the new mode macros
	ARM_HAVE_<MODE>_ARITH.
	(umin<mode>3, smax<mode>3, umax<mode>3): Likewise.

2020-10-22  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97520
	* gimple-range.cc (range_of_non_trivial_assignment): Handle x = &a
	by returning a non-zero range.

2020-10-22  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/mve.md (mve_vmulq<mode>): New entry for vmul instruction
	using expression 'mult'.
	(mve_vmulq_f<mode>): Use mult instead of VMULQ_F.
	* config/arm/neon.md (mul<mode>3): Removed.
	* config/arm/vec-common.md (mul<mode>3): Use the new mode macros
	ARM_HAVE_<MODE>_ARITH. Use mode iterator VDQWH instead of VALLW.

2020-10-22  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97515
	* value-query.cc (range_query::value_of_expr): If the result is
	UNDEFINED, check to see if the global value is a constant.
	(range_query::value_on_edge): Ditto.

2020-10-21  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/97445
	* ipa-inline.c (inline_insns_single): Add hint2 parameter.
	(inline_insns_auto): Add hint2 parameter.
	(can_inline_edge_by_limits_p): Update.
	(want_inline_small_function_p): Update.
	(wrapper_heuristics_may_apply): Update.

2020-10-21  Richard Biener  <rguenther@suse.de>
	    Andrew MacLeod  <amacleod@redhat.com>
	    Martin Liska  <mliska@suse.cz>

	PR target/97360
	* config/rs6000/rs6000-call.c (rs6000_init_builtins): Remove call to
	build_distinct_type_copy().

2020-10-21  Jan Hubicka  <jh@suse.cz>

	PR ipa/97445
	* ipa-fnsummary.c (ipa_dump_hints): Add INLINE_HINT_builtin_constant_p.
	(ipa_fn_summary::~ipa_fn_summary): Free builtin_constant_p_parms.
	(ipa_fn_summary_t::duplicate): Duplicate builtin_constant_p_parms.
	(ipa_dump_fn_summary): Dump builtin_constant_p_parms.
	(add_builtin_constant_p_parm): New function
	(set_cond_stmt_execution_predicate): Update builtin_constant_p_parms.
	(ipa_call_context::estimate_size_and_time): Set
	INLINE_HINT_builtin_constant_p..
	(ipa_merge_fn_summary_after_inlining): Merge builtin_constant_p_parms.
	(inline_read_section): Read builtin_constant_p_parms.
	(ipa_fn_summary_write): Write builtin_constant_p_parms.
	* ipa-fnsummary.h (enum ipa_hints_vals): Add
	INLINE_HINT_builtin_constant_p.
	* ipa-inline.c (want_inline_small_function_p): Use
	INLINE_HINT_builtin_constant_p.
	(edge_badness): Use INLINE_HINT_builtin_constant_p.

2020-10-21  Douglas Rupp  <rupp@adacore.com>

	* config/vx-common.h (LINK_SPEC, LIB_SPEC): Remove #undef.

2020-10-21  Douglas Rupp  <rupp@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>

	* config.gcc (powerpc*-wrs-vxworks7r*): New case.
	* config/rs6000/vxworks.h: Rework to handle VxWorks7.
	Refactor as common bits + vx6 vs vx7 ones. For the
	latter, rely essentially on the Linux configuration
	and adjust CPU to _VX_CPU in CPP_SPEC. Add a case
	for e6500. Use SUB3TARGET_OVERRIDE_OPTIONS for specifics
	to preserve the Linux SUBSUBTARGET_OVERRIDE_OPTIONS
	for vx7.

2020-10-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97500
	* tree-vect-slp.c (vect_analyze_slp_backedges): Do not
	fill backedges for inductions.

2020-10-21  liuhongt  <hongtao.liu@intel.com>

	PR target/97506
	* config/i386/i386-expand.c (ix86_expand_sse_movcc): Move
	op_true to dest directly when op_true equals op_false.

2020-10-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97503
	* tree-ssa-phiopt.c: Include internal-fn.h.
	(cond_removal_in_popcount_pattern): Rename to ...
	(cond_removal_in_popcount_clz_ctz_pattern): ... this.  Handle not just
	popcount, but also clz and ctz if it has C?Z_DEFINED_VALUE_AT_ZERO 2.

2020-10-21  Richard Biener  <rguenther@suse.de>

	* cfg.c (htab_bb_copy_original_entry): Remove.
	(bb_copy_hasher): Likewise.
	(bb_original, bb_copy, loop_copy): Use
	hash_map<int_hash<int, -1, -2>, int>.
	(original_copy_bb_pool): Remove.
	(initialize_original_copy_tables): Adjust.
	(reset_original_copy_tables): Likewise.
	(free_original_copy_tables): Likewise.
	(original_copy_tables_initialized_p): Likewise.
	(copy_original_table_clear): Simplify.
	(copy_original_table_set): Likewise.
	(get_bb_original): Likewise.
	(get_bb_copy): Likewise.
	(get_loop_copy): Likewise.

2020-10-21  Richard Biener  <rguenther@suse.de>

	* cfghooks.c (copy_bbs): Split out loop computing new_edges.

2020-10-21  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-range.cc (gimple_ranger::range_of_ssa_name_with_loop_info):
	Remove TREE_OVERFLOW special case.
	* vr-values.c (bounds_of_var_in_loop): Adjust overflow for
	invariants.

2020-10-21  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.h: Remove simplify_cond_using_ranges_2.
	(range_fits_type_p): New.
	* vr-values.c (range_fits_type_p): Remove static qualifier.
	(vrp_simplify_cond_using_ranges): Move...
	* tree-vrp.c (vrp_simplify_cond_using_ranges): ...to here.

2020-10-20  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97505
	* vr-values.c (vr_values::extract_range_basic): Trap if
	vr_values version disagrees with range_of_builtin_call.

2020-10-20  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Don't implcitly enable Altivec ABI if set on the command line.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	* calls.c (get_size_range): Adjust to work with ranger.
	* calls.h (get_size_range): Add ranger argument to prototype.
	* gimple-ssa-warn-restrict.c (class wrestrict_dom_walker): Remove.
	(check_call): Pull out of wrestrict_dom_walker into a
	static function.
	(wrestrict_dom_walker::before_dom_children): Rename to...
	(wrestrict_walk): ...this.
	(pass_wrestrict::execute): Instantiate ranger.
	(class builtin_memref): Add stmt and query fields.
	(builtin_access::builtin_access): Add range_query field.
	(builtin_memref::builtin_memref): Same.
	(builtin_memref::extend_offset_range): Same.
	(builtin_access::builtin_access): Make work with ranger.
	(wrestrict_dom_walker::check_call): Pull out into...
	(check_call): ...here.
	(check_bounds_or_overlap): Add range_query argument.
	* gimple-ssa-warn-restrict.h (check_bounds_or_overlap):
	Add range_query and gimple stmt arguments.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-warn-alloca.c (enum alloca_type): Remove
	ALLOCA_BOUND_UNKNOWN and ALLOCA_CAST_FROM_SIGNED.
	(warn_limit_specified_p): New.
	(alloca_call_type_by_arg): Remove.
	(cast_from_signed_p): Remove.
	(is_max): Remove.
	(alloca_call_type): Remove heuristics and replace with call into
	ranger.
	(pass_walloca::execute): Instantiate ranger.

2020-10-20  Tobias Burnus  <tobias@codesourcery.com>

	* lto-wrapper.c (run_gcc): Use proper variable for
	%u.ltrans_args dump suffix.

2020-10-20  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for get/set reg intrinsics.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-range.cc (gimple_ranger::range_of_builtin_ubsan_call):
	Make externally visble...
	(range_of_builtin_ubsan_call): ...here.  Add range_query argument.
	(gimple_ranger::range_of_builtin_call): Make externally visible...
	(range_of_builtin_call): ...here.  Add range_query argument.
	* gimple-range.h (range_of_builtin_call): Move out from class and
	make externally visible.
	* vr-values.c (vr_values::extract_range_basic): Abstract out
	builtin handling to...
	(vr_values::range_of_expr): Handle non SSAs.
	(vr_values::extract_range_builtin): ...here.
	* vr-values.h (class vr_values): Add extract_range_builtin.
	(range_of_expr): Rename NAME to EXPR.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97501
	* gimple-range.cc (gimple_ranger::range_of_ssa_name_with_loop_info):
	Saturate overflows returned from SCEV.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.cc (irange::operator=): Split up call to
	copy_legacy_range into...
	(irange::copy_to_legacy): ...this.
	(irange::copy_legacy_to_multi_range): ...and this.
	(irange::copy_legacy_range): Remove.
	* value-range.h: Remove copoy_legacy_range.
	Add copy_legacy_to_multi_range and copy_to_legacy.

2020-10-20  Tobias Burnus  <tobias@codesourcery.com>

	* doc/invoke.texi (NVPTX options): Use @item not @itemx.

2020-10-20  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (reinstall_phi_args): Remove.
	(gimple_split_edge): Remove PHIs around the edge redirection
	to avoid touching them at all.

2020-10-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_reduction): Use the correct
	loops latch edge for the PHI arg lookup.

2020-10-20  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (andneghi3): Allow general operand for
	op1 and update output assembler template.

2020-10-20  Tobias Burnus  <tobias@codesourcery.com>

	* collect-utils.c (collect_execute, fork_execute): Add at-file suffix
	argument.
	* collect-utils.h (collect_execute, fork_execute): Update prototype.
	* collect2.c (maybe_run_lto_and_relink, do_link, main, do_dsymutil):
	Update calls by passing NULL.
	* config/i386/intelmic-mkoffload.c (compile_for_target,
	generate_host_descr_file, prepare_target_image, main): Likewise.
	* config/gcn/mkoffload.c (compile_native, main): Pass at-file suffix.
	* config/nvptx/mkoffload.c (compile_native, main): Likewise.
	* lto-wrapper.c (compile_offload_image): Likewise.

2020-10-20  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (operator_rshift::op1_range): Special case
	shifting by zero.

2020-10-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97496
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Guard extern
	promotion with not in pattern.

2020-10-20  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config/s390/s390.c (s390_expand_vec_strlen): Add alignment
	for memory access inside loop.

2020-10-19  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97360
	* gimple-range.h (range_compatible_p): New.
	* gimple-range-gori.cc (is_gimple_logical_p): Use range_compatible_p.
	(range_is_either_true_or_false): Ditto.
	(gori_compute::outgoing_edge_range_p): Cast result to the correct
	type if necessary.
	(logical_stmt_cache::cacheable_p): Use range_compatible_p.
	* gimple-range.cc (gimple_ranger::calc_stmt): Check range_compatible_p
	before casting the range.
	(gimple_ranger::range_on_exit): Use range_compatible_p.
	(gimple_ranger::range_on_edge): Ditto.

2020-10-19  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/97456
	* tree-complex.c (set_component_ssa_name): Do not replace ignored decl
	default definitions with new component vars.  Reorder if conditions.

2020-10-19  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/vsx.md (vextract_fp_from_shorth):  Fix vals_be.
	(vextract_fp_from_shortl) Same.

2020-10-19  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97488
	* range-op.cc (operator_lshift::op1_range): Handle large right shifts.

2020-10-19  Martin Liska  <mliska@suse.cz>

	* ipa-modref.c (compute_parm_map): Clear vector.

2020-10-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97486
	* tree-vect-slp.c (vect_slp_function): Split after stmts
	ending a BB.

2020-10-19  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (OPptimize Options): Add missing closing
	parenthesis.

2020-10-19  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97467
	* range-op.cc (operator_lshift::op1_range): Handle shifts by 0.

2020-10-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97466
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Remove
	spurious assert, re-indent.

2020-10-19  Li Jia He  <helijia@gcc.gnu.org>

	PR tree-optimization/66552
	* match.pd (x << (n % C) -> x << (n & C-1)): New simplification.

2020-10-19  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_gimple_comparison): Drop special-case
	for pointer comparison.

2020-10-16  Andrew MacLeod  <amacleod@redhat.com>

	* vr-values.c (dump_all_value_ranges): Only dump names which are
	still active.

2020-10-16  Andrew MacLeod  <amacleod@redhat.com>

	* range-op.cc (pointer_plus_operator::wi_fold): Make pointer_plus
	[0, 0] + const return a [const, const] range.

2020-10-16  Andrew MacLeod  <amacleod@redhat.com>

	* gimple-ssa-evrp.c (hybrid_folder::value_on_edge): Call
	evrp_folder::value_of_expr directly.
	(hybrid_folder::value_of_stmt): Ditto.

2020-10-16  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97462
	* range-op.cc (operator_lshift::op1_range): Don't trap on negative
	shifts.

2020-10-16  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (VX_CRTBEGIN_SPEC): Likewise.

2020-10-16  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks/_vxworks-versions.h: Only include
	version.h if _WRS_VXWORKS_MAJOR is not defined.
	Provide a default _WRS_VXWORKS_MINOR (0).

2020-10-16  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/97327
	* config/arm/arm.c (fp_bitlist): Add isa_bit_mve_float to FP bits array.

2020-10-16  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): For BB
	vectorization swap operands only if it helps, demote mismatches to
	external.

2020-10-16  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/97291
	* config/arm/arm-builtins.c (arm_strsbwbs_qualifiers): Modify array.
	(arm_strsbwbu_qualifiers): Likewise.
	(arm_strsbwbs_p_qualifiers): Likewise.
	(arm_strsbwbu_p_qualifiers): Likewise.
	* config/arm/arm_mve.h (__arm_vstrdq_scatter_base_wb_s64): Modify
	function definition.
	(__arm_vstrdq_scatter_base_wb_u64): Likewise.
	(__arm_vstrdq_scatter_base_wb_p_s64): Likewise.
	(__arm_vstrdq_scatter_base_wb_p_u64): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_s32): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_u32): Likewise.
	(__arm_vstrwq_scatter_base_wb_s32): Likewise.
	(__arm_vstrwq_scatter_base_wb_u32): Likewise.
	(__arm_vstrwq_scatter_base_wb_f32): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_f32): Likewise.
	* config/arm/arm_mve_builtins.def (vstrwq_scatter_base_wb_add_u): Remove
	expansion for the builtin.
	(vstrwq_scatter_base_wb_add_s): Likewise.
	(vstrwq_scatter_base_wb_add_f): Likewise.
	(vstrdq_scatter_base_wb_add_u): Likewise.
	(vstrdq_scatter_base_wb_add_s): Likewise.
	(vstrwq_scatter_base_wb_p_add_u): Likewise.
	(vstrwq_scatter_base_wb_p_add_s): Likewise.
	(vstrwq_scatter_base_wb_p_add_f): Likewise.
	(vstrdq_scatter_base_wb_p_add_u): Likewise.
	(vstrdq_scatter_base_wb_p_add_s): Likewise.
	* config/arm/mve.md (mve_vstrwq_scatter_base_wb_<supf>v4si): Remove
	expand.
	(mve_vstrwq_scatter_base_wb_add_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_base_wb_<supf>v4si_insn): Rename pattern to ...
	(mve_vstrwq_scatter_base_wb_<supf>v4si): This.
	(mve_vstrwq_scatter_base_wb_p_<supf>v4si): Remove expand.
	(mve_vstrwq_scatter_base_wb_p_add_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_base_wb_p_<supf>v4si_insn): Rename pattern to ...
	(mve_vstrwq_scatter_base_wb_p_<supf>v4si): This.
	(mve_vstrwq_scatter_base_wb_fv4sf): Remove expand.
	(mve_vstrwq_scatter_base_wb_add_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_fv4sf_insn): Rename pattern to ...
	(mve_vstrwq_scatter_base_wb_fv4sf): This.
	(mve_vstrwq_scatter_base_wb_p_fv4sf): Remove expand.
	(mve_vstrwq_scatter_base_wb_p_add_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_p_fv4sf_insn): Rename pattern to ...
	(mve_vstrwq_scatter_base_wb_p_fv4sf): This.
	(mve_vstrdq_scatter_base_wb_<supf>v2di): Remove expand.
	(mve_vstrdq_scatter_base_wb_add_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_<supf>v2di_insn): Rename pattern to ...
	(mve_vstrdq_scatter_base_wb_<supf>v2di): This.
	(mve_vstrdq_scatter_base_wb_p_<supf>v2di): Remove expand.
	(mve_vstrdq_scatter_base_wb_p_add_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_p_<supf>v2di_insn): Rename pattern to ...
	(mve_vstrdq_scatter_base_wb_p_<supf>v2di): This.

2020-10-16  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator (IMPLIED_EXT): New.
	(arch_canonicalize): Update comment and handle implied extensions.

2020-10-16  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): First analyze
	all operands and fill in the def_stmts and ops entries.
	(vect_def_types_match): New helper.

2020-10-16  Martin Liska  <mliska@suse.cz>

	PR ipa/97404
	* ipa-prop.c (struct ipa_vr_ggc_hash_traits):
	Compare types of VRP as we can merge ranges of different types.

2020-10-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97428
	* tree-vect-slp.c (vect_analyze_slp_instance): Split store
	groups also for loop vectorization.

2020-10-15  Tom de Vries  <tdevries@suse.de>

	PR target/97436
	* config/nvptx/nvptx.opt (m32): Comment out.
	* doc/invoke.texi (NVPTX options): Remove -m32.

2020-10-15  Jan Hubicka  <hubicka@ucw.cz>
	    Richard Biener  <rguenther@suse.de>

	* attr-fnspec.h: Fix toplevel comment.

2020-10-15  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_mem_ref): Print constant offset
	also for TARGET_MEM_REF.

2020-10-15  Jan Hubicka  <jh@suse.cz>

	* symtab.c (symtab_node::binds_to_current_def_p): Also accept symbols
	defined in other partition.

2020-10-15  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_live_operation): Adjust
	dominance query.

2020-10-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97482
	* tree-data-ref.c (split_constant_offset_1): Handle
	trivial conversions better.
	* fold-const.c (convert_to_ptrofftype_loc): Elide conversion
	if the offset is already ptrofftype_p.

2020-10-15  Martin Liska  <mliska@suse.cz>

	PR ipa/97295
	* profile-count.c (profile_count::to_frequency): Move part of
	gcc_assert to STATIC_ASSERT.
	* regs.h (REG_FREQ_FROM_BB): Do not use count.to_frequency for
	a function that does not have count_max initialized.

2020-10-15  Jakub Jelinek  <jakub@redhat.com>

	* params.opt (-param-ipa-jump-function-lookups=): Add full stop at
	the end of the parameter description.

2020-10-15  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_cpu_tables): New.
	(riscv_arch_str): Return empty string if current_subset_list
	is NULL.
	(riscv_find_cpu): New.
	(riscv_handle_option): Verify option value of -mcpu.
	(riscv_expand_arch): Using std::string.
	(riscv_default_mtune): New.
	(riscv_expand_arch_from_cpu): Ditto.
	* config/riscv/riscv-cores.def: New.
	* config/riscv/riscv-protos.h (riscv_find_cpu): New.
	(riscv_cpu_info): New.
	* config/riscv/riscv.c (riscv_tune_info): Rename ...
	(riscv_tune_param): ... to this.
	(riscv_cpu_info): Rename ...
	(riscv_tune_info): ... to this.
	(tune_info): Rename ...
	(tune_param): ... to this.
	(rocket_tune_info): Update data type name.
	(sifive_7_tune_info): Ditto.
	(optimize_size_tune_info): Ditto.
	(riscv_cpu_info_table): Rename ...
	(riscv_tune_info_table): ... to this.
	(riscv_parse_cpu): Rename ...
	(riscv_parse_tune): ... to this, and translate valid -mcpu option to
	-mtune option.
	(riscv_rtx_costs): Rename tune_info to tune_param.
	(riscv_class_max_nregs): Ditto.
	(riscv_memory_move_cost): Ditto.
	(riscv_init_machine_status): Use value of -mcpu if -mtune is not
	given, and rename tune_info to tune_param.
	* config/riscv/riscv.h (riscv_expand_arch_from_cpu): New.
	(riscv_default_mtune): Ditto.
	(EXTRA_SPEC_FUNCTIONS): Add riscv_expand_arch_from_cpu and
	riscv_default_mtune.
	(OPTION_DEFAULT_SPECS): Handle default value of -march/-mabi.
	(DRIVER_SELF_SPECS): Expand -march from -mcpu if -march is not
	given.
	* config/riscv/riscv.opt (-mcpu): New option.
	* config/riscv/t-riscv ($(common_out_file)): Add
	riscv-cores.def to dependency.
	* doc/invoke.texi (RISC-V Option): Add -mcpu, and update the
	description of default value for -mtune and -march.

2020-10-15  Hongyu Wang  <hongyu.wang@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Detect HRESET.
	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_HRESET_SET,
	OPTION_MASK_ISA2_HRESET_UNSET): New macros.
	(ix86_handle_option): Handle -mhreset.
	* common/config/i386/i386-cpuinfo.h (enum processor_features):
	Add FEATURE_HRESET.
	* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
	for hreset.
	* config.gcc: Add hresetintrin.h
	* config/i386/hresetintrin.h: New header file.
	* config/i386/x86gprintrin.h: Include hresetintrin.h.
	* config/i386/cpuid.h (bit_HRESET): New.
	* config/i386/i386-builtin.def: Add new builtin.
	* config/i386/i386-expand.c (ix86_expand_builtin):
	Handle new builtin.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__HRESET__.
	* config/i386/i386-options.c (isa2_opts): Add -mhreset.
	(ix86_valid_target_attribute_inner_p): Handle hreset.
	* config/i386/i386.h (TARGET_HRESET, TARGET_HRESET_P,
	PTA_HRESET): New.
	(PTA_ALDERLAKE): Add PTA_HRESET.
	* config/i386/i386.opt: Add option -mhreset.
	* config/i386/i386.md (UNSPECV_HRESET): New unspec.
	(hreset): New define_insn.
	* doc/invoke.texi: Document -mhreset.
	* doc/extend.texi: Document hreset.

2020-10-15  Hongtao Liu  <hongtao.liu@intel.com>

	* common/config/i386/cpuinfo.h (get_available_features):
	Detect UINTR.
	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_UINTR_SET
	OPTION_MASK_ISA2_UINTR_UNSET): New.
	(ix86_handle_option): Handle -muintr.
	* common/config/i386/i386-cpuinfo.h (enum processor_features):
	Add FEATURE_UINTR.
	* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
	for uintr.
	* config.gcc: Add uintrintrin.h to extra_headers.
	* config/i386/uintrintrin.h: New.
	* config/i386/cpuid.h (bit_UINTR): New.
	* config/i386/i386-builtin-types.def: Add new types.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-builtins.c (ix86_init_mmx_sse_builtins): Add
	__builtin_ia32_testui.
	* config/i386/i386-builtins.h (ix86_builtins): Add
	IX86_BUILTIN_TESTUI.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__UINTR__.
	* config/i386/i386-expand.c (ix86_expand_special_args_builtin):
	Handle UINT8_FTYPE_VOID.
	(ix86_expand_builtin): Handle IX86_BUILTIN_TESTUI.
	* config/i386/i386-options.c (isa2_opts): Add -muintr.
	(ix86_valid_target_attribute_inner_p): Handle UINTR.
	(ix86_option_override_internal): Add TARGET_64BIT check for UINTR.
	* config/i386/i386.h (TARGET_UINTR, TARGET_UINTR_P, PTA_UINTR): New.
	(PTA_SAPPHIRRAPIDS): Add PTA_UINTR.
	* config/i386/i386.opt: Add -muintr.
	* config/i386/i386.md
	(define_int_iterator UINTR_UNSPECV): New.
	(define_int_attr uintr_unspecv): New.
	(uintr_<uintr_unspecv>, uintr_senduipi, testui):
	New define_insn patterns.
	* config/i386/x86gprintrin.h: Include uintrintrin.h
	* doc/invoke.texi: Document -muintr.
	* doc/extend.texi: Document uintr.

2020-10-14  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97391
	* builtins.c (gimple_parm_array_size): Peel off one less layer
	of array types.

2020-10-14  Martin Sebor  <msebor@redhat.com>

	PR c/97413
	* attribs.c (init_attr_rdwr_indices): Unwrap extra list layer.

2020-10-14  Sunil K Pandey  <skpgkp2@gmail.com>

	PR target/95483
	* config/i386/avx2intrin.h (_mm_broadcastsi128_si256): New intrinsics.
	(_mm_broadcastsd_pd): Ditto.
	* config/i386/avx512bwintrin.h (_mm512_loadu_epi16): New intrinsics.
	(_mm512_storeu_epi16): Ditto.
	(_mm512_loadu_epi8): Ditto.
	(_mm512_storeu_epi8): Ditto.
	* config/i386/avx512dqintrin.h (_mm_reduce_round_sd): New intrinsics.
	(_mm_mask_reduce_round_sd): Ditto.
	(_mm_maskz_reduce_round_sd): Ditto.
	(_mm_reduce_round_ss): Ditto.
	(_mm_mask_reduce_round_ss): Ditto.
	(_mm_maskz_reduce_round_ss): Ditto.
	(_mm512_reduce_round_pd): Ditto.
	(_mm512_mask_reduce_round_pd): Ditto.
	(_mm512_maskz_reduce_round_pd): Ditto.
	(_mm512_reduce_round_ps): Ditto.
	(_mm512_mask_reduce_round_ps): Ditto.
	(_mm512_maskz_reduce_round_ps): Ditto.
	* config/i386/avx512erintrin.h
	(_mm_mask_rcp28_round_sd): New intrinsics.
	(_mm_maskz_rcp28_round_sd): Ditto.
	(_mm_mask_rcp28_round_ss): Ditto.
	(_mm_maskz_rcp28_round_ss): Ditto.
	(_mm_mask_rsqrt28_round_sd): Ditto.
	(_mm_maskz_rsqrt28_round_sd): Ditto.
	(_mm_mask_rsqrt28_round_ss): Ditto.
	(_mm_maskz_rsqrt28_round_ss): Ditto.
	(_mm_mask_rcp28_sd): Ditto.
	(_mm_maskz_rcp28_sd): Ditto.
	(_mm_mask_rcp28_ss): Ditto.
	(_mm_maskz_rcp28_ss): Ditto.
	(_mm_mask_rsqrt28_sd): Ditto.
	(_mm_maskz_rsqrt28_sd): Ditto.
	(_mm_mask_rsqrt28_ss): Ditto.
	(_mm_maskz_rsqrt28_ss): Ditto.
	* config/i386/avx512fintrin.h (_mm_mask_sqrt_sd): New intrinsics.
	(_mm_maskz_sqrt_sd): Ditto.
	(_mm_mask_sqrt_ss): Ditto.
	(_mm_maskz_sqrt_ss): Ditto.
	(_mm_mask_scalef_sd): Ditto.
	(_mm_maskz_scalef_sd): Ditto.
	(_mm_mask_scalef_ss): Ditto.
	(_mm_maskz_scalef_ss): Ditto.
	(_mm_mask_cvt_roundsd_ss): Ditto.
	(_mm_maskz_cvt_roundsd_ss): Ditto.
	(_mm_mask_cvt_roundss_sd): Ditto.
	(_mm_maskz_cvt_roundss_sd): Ditto.
	(_mm_mask_cvtss_sd): Ditto.
	(_mm_maskz_cvtss_sd): Ditto.
	(_mm_mask_cvtsd_ss): Ditto.
	(_mm_maskz_cvtsd_ss): Ditto.
	(_mm512_cvtsi512_si32): Ditto.
	(_mm_cvtsd_i32): Ditto.
	(_mm_cvtss_i32): Ditto.
	(_mm_cvti32_sd): Ditto.
	(_mm_cvti32_ss): Ditto.
	(_mm_cvtsd_i64): Ditto.
	(_mm_cvtss_i64): Ditto.
	(_mm_cvti64_sd): Ditto.
	(_mm_cvti64_ss): Ditto.
	* config/i386/avx512vlbwintrin.h (_mm256_storeu_epi8): New intrinsics.
	(_mm_storeu_epi8): Ditto.
	(_mm256_loadu_epi16): Ditto.
	(_mm_loadu_epi16): Ditto.
	(_mm256_loadu_epi8): Ditto.
	(_mm_loadu_epi8): Ditto.
	(_mm256_storeu_epi16): Ditto.
	(_mm_storeu_epi16): Ditto.
	* config/i386/avx512vlintrin.h (_mm256_load_epi64): New intrinsics.
	(_mm_load_epi64): Ditto.
	(_mm256_load_epi32): Ditto.
	(_mm_load_epi32): Ditto.
	(_mm256_store_epi32): Ditto.
	(_mm_store_epi32): Ditto.
	(_mm256_loadu_epi64): Ditto.
	(_mm_loadu_epi64): Ditto.
	(_mm256_loadu_epi32): Ditto.
	(_mm_loadu_epi32): Ditto.
	(_mm256_mask_cvt_roundps_ph): Ditto.
	(_mm256_maskz_cvt_roundps_ph): Ditto.
	(_mm_mask_cvt_roundps_ph): Ditto.
	(_mm_maskz_cvt_roundps_ph): Ditto.
	* config/i386/avxintrin.h (_mm256_cvtsi256_si32): New intrinsics.
	* config/i386/emmintrin.h (_mm_loadu_si32): New intrinsics.
	(_mm_loadu_si16): Ditto.
	(_mm_storeu_si32): Ditto.
	(_mm_storeu_si16): Ditto.
	* config/i386/i386-builtin-types.def
	(V8DF_FTYPE_V8DF_INT_V8DF_UQI_INT): Add new type.
	(V16SF_FTYPE_V16SF_INT_V16SF_UHI_INT): Ditto.
	(V4SF_FTYPE_V4SF_V2DF_V4SF_UQI_INT): Ditto.
	(V2DF_FTYPE_V2DF_V4SF_V2DF_UQI_INT): Ditto.
	* config/i386/i386-builtin.def
	(__builtin_ia32_cvtsd2ss_mask_round): New builtin.
	(__builtin_ia32_cvtss2sd_mask_round): Ditto.
	(__builtin_ia32_rcp28sd_mask_round): Ditto.
	(__builtin_ia32_rcp28ss_mask_round): Ditto.
	(__builtin_ia32_rsqrt28sd_mask_round): Ditto.
	(__builtin_ia32_rsqrt28ss_mask_round): Ditto.
	(__builtin_ia32_reducepd512_mask_round): Ditto.
	(__builtin_ia32_reduceps512_mask_round): Ditto.
	(__builtin_ia32_reducesd_mask_round): Ditto.
	(__builtin_ia32_reducess_mask_round): Ditto.
	* config/i386/i386-expand.c
	(ix86_expand_round_builtin): Expand round builtin for new type.
	(V8DF_FTYPE_V8DF_INT_V8DF_UQI_INT)
	(V16SF_FTYPE_V16SF_INT_V16SF_UHI_INT)
	(V4SF_FTYPE_V4SF_V2DF_V4SF_UQI_INT)
	(V2DF_FTYPE_V2DF_V4SF_V2DF_UQI_INT)
	* config/i386/mmintrin.h ()
	Define datatype __m32 and __m16.
	Define datatype __m32_u and __m16_u.
	* config/i386/sse.md: Adjust pattern.
	(<mask_codefor>reducep<mode><mask_name><round_saeonly_name>): Adjust.
	(reduces<mode><mask_scalar_name><round_saeonly_scalar_name>): Ditto.
	(sse2_cvtsd2ss<mask_name><round_name>): Ditto.
	(sse2_cvtss2sd<mask_name><round_saeonly_name>): Ditto.
	(avx512er_vmrcp28<mode><mask_name><round_saeonly_name>): Ditto.
	(avx512er_vmrsqrt28<mode><mask_name><round_saeonly_name>): Ditto.

2020-10-14  Olivier Hainque  <hainque@adacore.com>

	* config/arm/vxworks.h (TARGET_OS_CPP_BUILTINS): Fix
	the VX_CPU selection for -mcpu=xscale on arm-vxworks.

2020-10-14  Olivier Hainque  <hainque@adacore.com>

	* config/rs6000/vxworks.h (TARGET_OS_CPP_BUILTINS): Accommodate
	expectations from different versions of VxWorks, for 32 or 64bit
	configurations.

2020-10-14  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h: #undef CPLUSPLUS_CPP_SPEC.

2020-10-14  Olivier Hainque  <hainque@adacore.com>

	* config/t-vxworks: Adjust the VxWorks alternative LIMITS_H guard
	for glimits.h, make it both closer to the previous one and easier to
	search for.

2020-10-14  Jakub Jelinek  <jakub@redhat.com>

	PR target/97387
	* config/i386/i386.md (CC_CCC): New mode iterator.
	(*setcc_qi_addqi3_cconly_overflow_1_<mode>): New
	define_insn_and_split.
	* config/i386/i386.c (ix86_cc_mode): Return CCCmode
	for *setcc_qi_addqi3_cconly_overflow_1_<mode> pattern operands.
	(ix86_rtx_costs): Return true and *total = 0;
	for *setcc_qi_addqi3_cconly_overflow_1_<mode> pattern.  Use op0 and
	op1 temporaries to simplify COMPARE checks.

2020-10-14  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97396
	* gimple-range.cc (gimple_ranger::range_of_phi): Do not call
	range_of_ssa_name_with_loop_info with the loop tree root.

2020-10-14  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Split out
	test for compatible operand types.

2020-10-14  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.c (vxworks_override_options): Guard pic checks with
	flag_pic > 0 instead of just flag_pic.

2020-10-14  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (remap_edge_summaries): Make offset_map HOST_WIDE_INT.
	(remap_freqcounting_predicate): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	* ipa-predicate.c (predicate::remap_after_inlining): Likewise
	* ipa-predicate.h (remap_after_inlining): Update.

2020-10-14  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (compute_parm_map): Handle POINTER_PLUS_EXPR in
	PASSTHROUGH.

2020-10-14  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Move
	check for duplicate/interleave of variable size constants
	to a place done once and early.
	(vect_build_slp_tree_2): Adjust heuristics when to build
	a BB SLP node from scalars.

2020-10-14  Tom de Vries  <tdevries@suse.de>

	* tracer.c (cached_can_duplicate_bb_p, analyze_bb): Use
	can_duplicate_block_p.
	(can_duplicate_insn_p, can_duplicate_bb_no_insn_iter_p)
	(can_duplicate_bb_p): Move and merge ...
	* tree-cfg.c (gimple_can_duplicate_bb_p): ... here.

2020-10-14  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi: (ipa-jump-function-lookups): Document param.
	* ipa-modref.c (merge_call_side_effects): Use
	unadjusted_ptr_and_unit_offset.
	* ipa-prop.c (unadjusted_ptr_and_unit_offset): New function.
	* ipa-prop.h (unadjusted_ptr_and_unit_offset): Declare.
	* params.opt: (-param-ipa-jump-function-lookups): New.

2020-10-14  Jan Hubicka  <jh@suse.cz>

	PR bootstrap/97350
	* ipa-modref.c (ignore_edge): Do not ignore inlined edes.
	(ipa_merge_modref_summary_after_inlining): Improve debug output and
	fix parameter of ignore_stores_p.

2020-10-14  Kito Cheng  <kito.cheng@sifive.com>

	PR target/96759
	* expr.c (expand_assignment): Handle misaligned stores with PARALLEL
	value.

2020-10-13  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97386
	* combine.c (simplify_shift_const_1): Don't optimize nested ROTATEs if
	they have different modes.

2020-10-13  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97379
	* gimple-range-edge.cc (outgoing_range::calc_switch_ranges): Do
	not save hash slot across calls to hash_table<>::get_or_insert.

2020-10-13  Tobias Burnus  <tobias@codesourcery.com>

	* lto-wrapper.c (find_crtoffloadtable): Fix last commit
	by adding NULL as last argument to concat.

2020-10-13  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (neoversen2_tunings): Define.
	* config/aarch64/aarch64-cores.def (neoverse-n2): Use it.

2020-10-13  Tobias Burnus  <tobias@codesourcery.com>

	* lto-wrapper.c (find_crtoffloadtable): With -save-temps,
	use non-temp file name utilizing the dump prefix.
	(run_gcc): Update call.

2020-10-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97382
	* tree-vectorizer.h (_stmt_vec_info::same_align_refs): Remove.
	(STMT_VINFO_SAME_ALIGN_REFS): Likewise.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Do not
	allocate STMT_VINFO_SAME_ALIGN_REFS.
	(vec_info::free_stmt_vec_info): Do not release
	STMT_VINFO_SAME_ALIGN_REFS.
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
	Do not compute self and read-read dependences.
	(vect_dr_aligned_if_related_peeled_dr_is): New helper.
	(vect_dr_aligned_if_peeled_dr_is): Likewise.
	(vect_update_misalignment_for_peel): Use it instead of
	iterating over STMT_VINFO_SAME_ALIGN_REFS.
	(dr_align_group_sort_cmp): New function.
	(vect_enhance_data_refs_alignment): Count the number of
	same aligned refs here and elide uses of STMT_VINFO_SAME_ALIGN_REFS.
	(vect_find_same_alignment_drs): Remove.
	(vect_analyze_data_refs_alignment): Do not call it.
	* vec.h (auto_vec<T, 0>::auto_vec): Adjust CTOR to take
	a vec<>&&, assert it isn't using auto storage.
	(auto_vec& operator=): Apply a similar change.

2020-10-13  Tobias Burnus  <tobias@codesourcery.com>

	* config/nvptx/mkoffload.c (main): Add missing fclose (in).

2020-10-13  Zhiheng Xie  <xiezhiheng@huawei.com>
	    Nannan Zheng  <zhengnannan@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for mul/mla/mls intrinsics.

2020-10-13  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (add_taskreg_looptemp_clauses): For triangular loops
	with non-constant number of iterations add another 4 _looptemp_
	clauses before the (optional) one for lastprivate.
	(lower_omp_for_lastprivate): Skip those clauses when looking for
	the lastprivate clause.
	(lower_omp_for): For triangular loops with non-constant number of
	iterations add another 4 _looptemp_ clauses.
	* omp-expand.c (expand_omp_for_init_counts): For triangular loops
	with non-constant number of iterations set counts[0],
	fd->first_inner_iterations, fd->factor and fd->adjn1 from the newly
	added _looptemp_ clauses.
	(expand_omp_for_init_vars): Initialize the newly added _looptemp_
	clauses.
	(find_lastprivate_looptemp): New function.
	(expand_omp_for_static_nochunk, expand_omp_for_static_chunk,
	expand_omp_taskloop_for_outer): Use it instead of manually skipping
	_looptemp_ clauses.

2020-10-13  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/97389
	* ipa-modref.c (dump_lto_records): Fix formating of dump file.
	(modref_summary::dump): Do not check loads to be non-null.
	(modref_summary_lto::dump): Do not check loads to be non-null.
	(merge_call_side_effects): Improve debug output.
	(analyze_call): Crash when cur_summary->loads is NULL.
	(analyze_function): Update.
	(modref_summaries::insert): Insert only into summaries, not
	optimization_summaries.
	(modref_summaries::duplicate): Likewise; crash when load or sotres
	are NULL.
	(modref_summaries_lto::duplicate): Crash when loads or stores are NULL.
	(write_modref_records): param_index is signed.
	(read_modref_records): param_index is signed.
	(modref_write): Crash when loads or stores are NULL.
	(read_section): Compensate previous change.
	(pass_modref::execute): Do not check optimization_summaries t be
	non-NULL.
	(ignore_edge): Fix.
	(compute_parm_map): Fix formating.
	(modref_propagate_in_scc): Do not expect loads/stores to be NULL.

2020-10-12  Alexandre Oliva  <oliva@adacore.com>

	* builtins.c (mathfn_built_in_type): Use CFN_ enumerators.

2020-10-12  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97381
	* gimple-range-gori.cc (gori_compute::compute_operand2_range): If a range cannot be
	calculated through operand 2, return false.

2020-10-12  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97378
	* range-op.cc (operator_trunc_mod::wi_fold): Return VARYING for mod by zero.

2020-10-12  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi: Document -Wanalyzer-write-to-const and
	-Wanalyzer-write-to-string-literal.

2020-10-12  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97342
	PR middle-end/97023
	PR middle-end/96384
	* builtins.c (access_ref::access_ref): Initialize new member.  Use
	new enum.
	(access_ref::size_remaining): Define new member function.
	(inform_access): Handle expressions referencing objects.
	(gimple_call_alloc_size): Call get_size_range instead of get_range.
	(gimple_call_return_array): New function.
	(get_range): Rename...
	(get_offset_range): ...to this.  Improve detection of ranges from
	types of expressions.
	(gimple_call_return_array): Adjust calls to get_range per above.
	(compute_objsize): Same.  Set maximum size or offset instead of
	failing for unknown objects and handle more kinds of expressions.
	(compute_objsize): Call access_ref::size_remaining.
	(compute_objsize): Have transitional wrapper fail for pointers
	into unknown objects.
	(expand_builtin_strncmp): Call access_ref::size_remaining and
	handle new cases.
	* builtins.h (access_ref::size_remaining): Declare new member function.
	(access_ref::set_max_size_range): Define new member function.
	(access_ref::add_ofset, access_ref::add_max_ofset): Same.
	(access_ref::add_base0): New data member.
	* calls.c (get_size_range): Change argument type.  Handle new
	condition.
	* calls.h (get_size_range): Adjust signature.
	(enum size_range_flags): Define new type.
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Correct
	argument to get_size_range.
	* tree-ssa-strlen.c (get_range): Handle anti-ranges.
	(maybe_warn_overflow): Check DECL_P before assuming it's one.

2020-10-12  Martin Sebor  <msebor@redhat.com>

	PR c++/96511
	PR middle-end/96384
	* builtins.c (get_range): Return full range of type when neither
	value nor its range is available.  Fail for ranges inverted due
	to the signedness of offsets.
	(compute_objsize): Handle more special array members.  Handle
	POINTER_PLUS_EXPR and VIEW_CONVERT_EXPR that come up in front end
	code.
	(access_ref::offset_bounded): Define new member function.
	* builtins.h (access_ref::eval): New data member.
	(access_ref::offset_bounded): New member function.
	(access_ref::offset_zero): New member function.
	(compute_objsize): Declare a new overload.
	* gimple-array-bounds.cc (array_bounds_checker::check_array_ref): Use
	enum special_array_member.
	* tree.c (component_ref_size): Use special_array_member.
	* tree.h (special_array_member): Define a new type.
	(component_ref_size): Change signature.

2020-10-12  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref.c (modref_summaries): Remove field IPA.
	(class modref_summary_lto): New global variable.
	(class modref_summaries_lto): New.
	(modref_summary::modref_summary): Remove loads_lto and stores_lto.
	(modref_summary::~modref_summary): Remove loads_lto and stores_lto.
	(modref_summary::useful_p): Do not use lto_useful.
	(modref_records_lto): New typedef.
	(struct modref_summary_lto): New type.
	(modref_summary_lto::modref_summary_lto): New member function.
	(modref_summary_lto::~modref_summary_lto): New member function.
	(modref_summary_lto::useful_p): New member function.
	(modref_summary::dump): Do not handle lto.
	(modref_summary_lto::dump): New member function.
	(get_modref_function_summary): Use optimization_summary.
	(merge_call_side_effects): Use optimization_summary.
	(analyze_call): Use optimization_summary.
	(struct summary_ptrs): New struture.
	(analyze_load): Update to handle separate lto and non-lto summaries.
	(analyze_store): Likewise.
	(analyze_stmt): Likewise.
	(remove_summary): Break out from ...
	(analyze_function): ... here; update to handle seprated summaries.
	(modref_summaries::insert): Do not handle lto summary.
	(modref_summaries_lto::insert): New member function.
	(modref_summaries::duplicate): Do not handle lto summary.
	(modref_summaries_lto::duplicate): New member function.
	(read_modref_records): Expect nolto_ret or lto_ret to be NULL>
	(modref_write): Write lto summary.
	(read_section): Handle separated summaries.
	(modref_read): Initialize separated summaries.
	(modref_transform): Handle separated summaries.
	(pass_modref::execute): Turn summary to optimization_summary; handle
	separate summaries.
	(ignore_edge): Handle separate summaries.
	(ipa_merge_modref_summary_after_inlining): Likewise.
	(collapse_loads): Likewise.
	(modref_propagate_in_scc): Likewise.
	(pass_ipa_modref::execute): Likewise.
	(ipa_modref_c_finalize): Likewise.
	* ipa-modref.h (modref_records_lto): Remove typedef.
	(struct modref_summary): Remove stores_lto, loads_lto and finished
	fields; remove lto_useful_p member function.

2020-10-12  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_slp_analyze_instance_dependence):
	Use SLP_TREE_REPRESENTATIVE.
	* tree-vectorizer.h (_slp_tree::vertex): New member used
	for graphds interfacing.
	* tree-vect-slp.c (vect_build_slp_tree_2): Allocate space
	for PHI SLP children.
	(vect_analyze_slp_backedges): New function filling in SLP
	node children for PHIs that correspond to backedge values.
	(vect_analyze_slp): Call vect_analyze_slp_backedges for the
	graph.
	(vect_slp_analyze_node_operations): Deal with a cyclic graph.
	(vect_schedule_slp_instance): Likewise.
	(vect_schedule_slp): Likewise.
	(slp_copy_subtree): Remove.
	(vect_slp_rearrange_stmts): Likewise.
	(vect_attempt_slp_rearrange_stmts): Likewise.
	(vect_slp_build_vertices): New functions.
	(vect_slp_permute): Likewise.
	(vect_slp_perms_eq): Likewise.
	(vect_optimize_slp): Remove special code to elide
	permutations with SLP reductions.  Implement generic
	permute optimization.

2020-10-12  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.c (arm_preferred_simd_mode): Use E_FOOmode
	instead of FOOmode.

2020-10-12  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/97079
	* internal-fn.c (internal_fn_stored_value_index): Handle also
	.MASK_STORE_LANES.
	* tree-vect-patterns.c (vect_recog_over_widening_pattern): Bail
	out for unsupported TREE_TYPE.

2020-10-12  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_partition_graph_r): Use visited
	hash-map.
	(vect_bb_partition_graph): Likewise.

2020-10-12  Duan bo  <duanbo3@huawei.com>

	PR target/96757
	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Add
	the identification and handling of the dropped situation in the
	cond expression processing phase.

2020-10-12  Tobias Burnus  <tobias@codesourcery.com>

	* doc/invoke.texi (nvptx's -misa): Update default to sm_35.

2020-10-12  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/97349
	* config/aarch64/arm_neon.h (vdupq_n_p8, vdupq_n_p16,
	vdupq_n_p64, vdupq_n_s8, vdupq_n_s16, vdupq_n_u8, vdupq_n_u16):
	Fix argument type.

2020-10-12  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390-protos.h (s390_build_signbit_mask): New
	function.
	* config/s390/s390.c (s390_contiguous_bitmask_vector_p):
	Bitcast the argument to an integral mode.
	(s390_expand_vec_init): Do not call
	s390_contiguous_bitmask_vector_p with a scalar argument.
	(s390_build_signbit_mask): New function.
	* config/s390/vector.md (copysign<mode>3): Use bitwise
	operations.

2020-10-12  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97371
	* range-op.cc (operator_rshift::op1_range): Ignore shifts larger than
	or equal to type precision.

2020-10-12  Martin Liska  <mliska@suse.cz>

	* ipa-modref.c (merge_call_side_effects): Clear modref_parm_map
	fields in the vector.

2020-10-12  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Set matches to true
	after successful discovery but forced split.

2020-10-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.opt (-msoft-stack-reserve-local): Rename to ...
	(-msoft-stack-reserve-local=): ... this.

2020-10-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97357
	* tree-ssa-loop-split.c (ssa_semi_invariant_p): Abnormal
	SSA names are not semi invariant.

2020-10-11  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_globalize_label): Make a subset of
	metadate symbols global.
	(darwin_label_is_anonymous_local_objc_name): Make a subset of
	metadata symbols linker-visible.
	(darwin_override_options): Track more target OS versions, make
	the next_runtime version track this (unless it's set to 0 for
	GNU runtime).

2020-10-11  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_globalize_label): Add protocol
	meta-data labels to the set that are global.
	(darwin_label_is_anonymous_local_objc_name): Arrange for meta-
	data start labels to be linker-visible.

2020-10-11  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_objc2_section): Allow for
	values > 1 to represent the next runtime.
	(darwin_objc1_section): Likewise.
	* config/darwin.h (NEXT_OBJC_RUNTIME): Set the default
	next runtime value to be 10.5.8.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_transform): Fix parameter map computation.

2020-10-10  Tom de Vries  <tdevries@suse.de>

	PR target/97318
	* config/nvptx/nvptx.c (nvptx_replace_dot): New function.
	(write_fn_proto, write_fn_proto_from_insn, nvptx_output_call_insn):
	Use nvptx_replace_dot.

2020-10-10  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (write_fn_proto_1): New function, factored out
	of ...
	(write_fn_proto): ... here.  Return void.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (remap_arguments): Check range in map access.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_transform): Use reserve instead of safe_grow.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_transform): Check that summaries are allocated.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* ipa-modref-tree.h (struct modref_tree): Revert prevoius change.
	* ipa-modref.c (analyze_function): Dump original summary.
	(modref_read): Only set IPA if streaming summary (not optimization
	summary).
	(remap_arguments): New function.
	(modref_transform): New function.
	(compute_parm_map): Fix offset calculation.
	(ipa_merge_modref_summary_after_inlining): Do not merge stores when
	they can be ignored.

2020-10-10  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Improve debug dumps.
	(call_may_clobber_ref_p_1): Improve debug dumps.

2020-10-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (output_objc_section_asm_op): Avoid extra
	objective-c section switches unless the linker needs them.

2020-10-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-sections.def (objc2_data_section): New.
	(objc2_ivar_section): New.
	* config/darwin.c (darwin_objc2_section): Act on Protocol and
	ivar refs.

2020-10-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-sections.def (objc2_class_names_section,
	objc2_method_names_section, objc2_method_types_section): New
	* config/darwin.c (output_objc_section_asm_op): Output new
	sections.  (darwin_objc2_section): Select new sections where
	used.

2020-10-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_emit_local_bss): Amend section names to
	match system tools. (darwin_output_aligned_bss): Likewise.

2020-10-10  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97359
	* gimple-range-gori.cc (logical_stmt_cache::cacheable_p): Only
	handle ANDs and ORs.
	(gori_compute_cache::cache_stmt): Adjust comment.

2020-10-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/97313
	* lra-constraints.c (match_reload): Don't keep strict_low_part in
	reloads for non-registers.

2020-10-09  H.J. Lu  <hjl.tools@gmail.com>

	PR target/97148
	* config.gcc (extra_headers): Add x86gprintrin.h.
	* config/i386/adxintrin.h: Check _X86GPRINTRIN_H_INCLUDED for
	<x86gprintrin.h>.
	* config/i386/bmi2intrin.h: Likewise.
	* config/i386/bmiintrin.h: Likewise.
	* config/i386/cetintrin.h: Likewise.
	* config/i386/cldemoteintrin.h: Likewise.
	* config/i386/clflushoptintrin.h: Likewise.
	* config/i386/clwbintrin.h: Likewise.
	* config/i386/enqcmdintrin.h: Likewise.
	* config/i386/fxsrintrin.h: Likewise.
	* config/i386/ia32intrin.h: Likewise.
	* config/i386/lwpintrin.h: Likewise.
	* config/i386/lzcntintrin.h: Likewise.
	* config/i386/movdirintrin.h: Likewise.
	* config/i386/pconfigintrin.h: Likewise.
	* config/i386/pkuintrin.h: Likewise.
	* config/i386/rdseedintrin.h: Likewise.
	* config/i386/rtmintrin.h: Likewise.
	* config/i386/serializeintrin.h: Likewise.
	* config/i386/tbmintrin.h: Likewise.
	* config/i386/tsxldtrkintrin.h: Likewise.
	* config/i386/waitpkgintrin.h: Likewise.
	* config/i386/wbnoinvdintrin.h: Likewise.
	* config/i386/xsavecintrin.h: Likewise.
	* config/i386/xsaveintrin.h: Likewise.
	* config/i386/xsaveoptintrin.h: Likewise.
	* config/i386/xsavesintrin.h: Likewise.
	* config/i386/xtestintrin.h: Likewise.
	* config/i386/immintrin.h: Include <x86gprintrin.h> instead of
	<fxsrintrin.h>, <xsaveintrin.h>, <xsaveoptintrin.h>,
	<xsavesintrin.h>, <xsavecintrin.h>, <lzcntintrin.h>,
	<bmiintrin.h>, <bmi2intrin.h>, <xtestintrin.h>, <cetintrin.h>,
	<movdirintrin.h>, <sgxintrin.h, <pconfigintrin.h>,
	<waitpkgintrin.h>, <cldemoteintrin.h>, <enqcmdintrin.h>,
	<serializeintrin.h>, <tsxldtrkintrin.h>, <adxintrin.h>,
	<clwbintrin.h>, <clflushoptintrin.h>, <wbnoinvdintrin.h> and
	<pkuintrin.h>.
	(_wbinvd): Moved to config/i386/x86gprintrin.h.
	(_rdrand16_step): Likewise.
	(_rdrand32_step): Likewise.
	(_rdpid_u32): Likewise.
	(_readfsbase_u32): Likewise.
	(_readfsbase_u64): Likewise.
	(_readgsbase_u32): Likewise.
	(_readgsbase_u64): Likewise.
	(_writefsbase_u32): Likewise.
	(_writefsbase_u64): Likewise.
	(_writegsbase_u32): Likewise.
	(_writegsbase_u64): Likewise.
	(_rdrand64_step): Likewise.
	(_ptwrite64): Likewise.
	(_ptwrite32): Likewise.
	* config/i386/x86gprintrin.h: New file.
	* config/i386/x86intrin.h: Include <x86gprintrin.h>.  Don't
	include <ia32intrin.h>, <lwpintrin.h>, <tbmintrin.h>,
	<popcntintrin.h>, <mwaitxintrin.h> and <clzerointrin.h>.

2020-10-09  Tom de Vries  <tdevries@suse.de>

	PR target/97348
	* config/nvptx/nvptx.h (ASM_SPEC): Also pass -m to nvptx-as if
	default is used.
	* config/nvptx/nvptx.opt (misa): Init with PTX_ISA_SM35.

2020-10-09  Richard Biener  <rguenther@suse.de>

	* doc/sourcebuild.texi (vect_masked_load): Document.

2020-10-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97334
	* tree-vect-slp.c (vect_build_slp_tree_1): Do not fatally
	fail lanes other than zero when BB vectorizing.

2020-10-09  Jan Hubicka  <jh@suse.cz>

	PR ipa/97292
	PR ipa/97335
	* ipa-modref-tree.h (copy_from): Drop summary in a
	clone.

2020-10-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97347
	* tree-vect-slp.c (vect_create_constant_vectors): Use
	edge insertion when inserting on the fallthru edge,
	appropriately insert at the start of BBs when inserting
	after PHIs.

2020-10-09  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/97317
	* range-op.cc (operator_cast::op1_range): Handle casts where the precision
	of the RHS is only 1 greater than the precision of the LHS.

2020-10-09  Richard Biener  <rguenther@suse.de>

	* cgraphunit.c (expand_all_functions): Free tp_first_run_order.
	* ipa-modref.c (pass_ipa_modref::execute): Free order.
	* tree-ssa-loop-niter.c (estimate_numbers_of_iterations): Free
	loop body.
	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Free
	data references upon failure.
	* tree-vect-loop.c (update_epilogue_loop_vinfo): Free BBs
	array of the original loop.
	* tree-vect-slp.c (vect_slp_bbs): Use an auto_vec for
	dataref_groups to release its memory.

2020-10-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94801
	PR target/97312
	* vr-values.c (vr_values::extract_range_basic) <CASE_CFN_CLZ,
	CASE_CFN_CTZ>: When stmt is not an internal-fn call or
	C?Z_DEFINED_VALUE_AT_ZERO is not 2, assume argument is not zero
	and thus use [0, prec-1] range unless it can be further improved.
	For CTZ, don't update maxi from upper bound if it was previously prec.
	* gimple-range.cc (gimple_ranger::range_of_builtin_call) <CASE_CFN_CLZ,
	CASE_CFN_CTZ>: Likewise.

2020-10-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97325
	* match.pd (FFS(nonzero) -> CTZ(nonzero) + 1): Cast argument to
	corresponding unsigned type.

2020-10-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_create_constant_vectors): Properly insert
	after PHIs.

2020-10-08  Alexandre Oliva  <oliva@adacore.com>

	* builtins.c (mathfn_built_in_type): New.
	* builtins.h (mathfn_built_in_type): Declare.
	* tree-ssa-math-opts.c (execute_cse_sincos_1): Use it to
	obtain the type expected by the intrinsic.

2020-10-08  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_P10_MISC_2): Rename
	to BU_P10_POWERPC64_MISC_2.
	CFUGED, CNTLZDM, CNTTZDM, PDEPD, PEXTD): Call renamed macro.

2020-10-08  Jan Hubicka  <jh@suse.cz>

	* tree-nrv.c (dest_safe_for_nrv_p): Disable tbaa in
	call_may_clobber_ref_p and ref_maybe_used_by_stmt_p.
	* tree-tailcall.c (find_tail_calls): Likewise.
	* tree-ssa-alias.c (call_may_clobber_ref_p): Add tbaa_p parameter.
	* tree-ssa-alias.h (call_may_clobber_ref_p): Update prototype.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Pass data->tbaa_p
	to call_may_clobber_ref_p_1.

2020-10-08  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (dwarf2out_finish): Emit .file 0 entry when
	generating DWARF5 .debug_line table through gas.

2020-10-08  John Henning  <john.henning@oracle.com>

	PR other/97309
	* doc/invoke.texi: Improve documentation of
	-fallow-store-data-races.

2020-10-08  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96914
	* config/arm/arm_mve.h (__arm_vcvtnq_u32_f32): New.

2020-10-08  Martin Liska  <mliska@suse.cz>
	    Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_bb_vec_info::const_iterator): Remove.
	(_bb_vec_info::const_reverse_iterator): Likewise.
	(_bb_vec_info::region_stmts): Likewise.
	(_bb_vec_info::reverse_region_stmts): Likewise.
	(_bb_vec_info::_bb_vec_info): Adjust.
	(_bb_vec_info::bb): Remove.
	(_bb_vec_info::region_begin): Remove.
	(_bb_vec_info::region_end): Remove.
	(_bb_vec_info::bbs): New vector of BBs.
	(vect_slp_function): Declare.
	* tree-vect-patterns.c (vect_determine_precisions): Use
	regular stmt iteration.
	(vect_pattern_recog): Likewise.
	* tree-vect-slp.c: Include cfganal.h, tree-eh.h and tree-cfg.h.
	(vect_build_slp_tree_1): Properly refuse to vectorize
	volatile and throwing stmts.
	(vect_build_slp_tree_2): Pass group-size down to
	get_vectype_for_scalar_type.
	(_bb_vec_info::_bb_vec_info): Use regular stmt iteration,
	adjust for changed region specification.
	(_bb_vec_info::~_bb_vec_info): Likewise.
	(vect_slp_check_for_constructors): Likewise.
	(vect_slp_region): Likewise.
	(vect_slp_bbs): New worker operating on a vector of BBs.
	(vect_slp_bb): Wrap it.
	(vect_slp_function): New function splitting the function
	into multi-BB regions.
	(vect_create_constant_vectors): Handle the case of inserting
	after a throwing def.
	(vect_schedule_slp_instance): Adjust.
	* tree-vectorizer.c (vec_info::remove_stmt): Simplify again.
	(vec_info::insert_seq_on_entry): Adjust.
	(pass_slp_vectorize::execute): Also init PHIs.  Call
	vect_slp_function.

2020-10-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97330
	* tree-ssa-sink.c (statement_sink_location): Avoid skipping
	PHIs when they dominate the insert location.

2020-10-08  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (get_access): Fix handling of offsets.
	* tree-ssa-alias.c (modref_may_conflict): Watch for overflows.

2020-10-08  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (DEBUG_COUNTER): Add ipa_mod_ref debug counter.
	* tree-ssa-alias.c (modref_may_conflict): Handle the counter.

2020-10-08  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.c (try_vectorize_loop_1): Do not dump
	"basic block vectorized".
	(pass_slp_vectorize::execute): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_instance): Avoid
	re-analyzing split single stmts.

2020-10-08  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96914
	* config/arm/arm_mve.h (vqrdmlashq_n_u8, vqrdmlashq_n_u16)
	(vqrdmlashq_n_u32, vqrdmlahq_n_u8, vqrdmlahq_n_u16)
	(vqrdmlahq_n_u32, vqdmlahq_n_u8, vqdmlahq_n_u16, vqdmlahq_n_u32)
	(vmlaldavaxq_p_u16, vmlaldavaxq_p_u32): Remove.
	* config/arm/arm_mve_builtins.def (vqrdmlashq_n_u, vqrdmlahq_n_u)
	(vqdmlahq_n_u, vmlaldavaxq_p_u): Remove.
	* config/arm/unspecs.md (VQDMLAHQ_N_U, VQRDMLAHQ_N_U)
	(VQRDMLASHQ_N_U)
	(VMLALDAVAXQ_P_U): Remove unspecs.
	* config/arm/iterators.md (VQDMLAHQ_N_U, VQRDMLAHQ_N_U)
	(VQRDMLASHQ_N_U, VMLALDAVAXQ_P_U): Remove attributes.
	(VQDMLAHQ_N, VQRDMLAHQ_N, VQRDMLASHQ_N, VMLALDAVAXQ_P): Remove
	unsigned variants from iterators.
	* config/arm/mve.md (mve_vqdmlahq_n_<supf><mode>)
	(mve_vqrdmlahq_n_<supf><mode>)
	(mve_vqrdmlashq_n_<supf><mode>, mve_vmlaldavaxq_p_<supf><mode>):
	Update comment.

2020-10-08  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96914
	* config/arm/arm_mve.h (vqdmlashq, vqdmlashq_m): Define.
	* config/arm/arm_mve_builtins.def (vqdmlashq_n_s)
	(vqdmlashq_m_n_s,): New.
	* config/arm/unspecs.md (VQDMLASHQ_N_S, VQDMLASHQ_M_N_S): New
	unspecs.
	* config/arm/iterators.md (VQDMLASHQ_N_S, VQDMLASHQ_M_N_S): New
	attributes.
	(VQDMLASHQ_N): New iterator.
	* config/arm/mve.md (mve_vqdmlashq_n_, mve_vqdmlashq_m_n_s): New
	patterns.

2020-10-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/97322
	* config/arm/arm.c (arm_expand_divmod_libfunc): Pass mode instead of
	GET_MODE (op0) or GET_MODE (op1) to emit_library_call_value.

2020-10-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97325
	* gimple-range.cc (gimple_ranger::range_of_builtin_call): Handle
	negative numbers in __builtin_ffs and __builtin_popcount.

2020-10-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97315
	* range-op.cc (value_range_with_overflow): Change any
	non-overflow calculation in which both bounds are
	overflow/underflow to be undefined.

2020-10-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/97315
	* gimple-ssa-evrp.c (hybrid_folder::choose_value): Removes the
	trap and instead annotates the listing.

2020-10-08  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/97294
	* tree-cfg.c (move_block_to_fn): Call notice_special_calls on
	call stmts being moved into dest_cfun.
	* omp-low.c (lower_rec_input_clauses): Set cfun->calls_alloca when
	adding __builtin_alloca_with_align call without gimplification.

2020-10-07  Aldy Hernandez  <aldyh@redhat.com>

	* common.opt (-fevrp-mode): Rename and move...
	* params.opt (--param=evrp-mode): ...here.
	* gimple-range.h (DEBUG_RANGE_CACHE): Use param_evrp_mode instead
	of flag_evrp_mode.
	* gimple-ssa-evrp.c (rvrp_folder): Same.
	(hybrid_folder): Same.
	(execute_early_vrp): Same.

2020-10-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97307
	* tree-ssa-sink.c (statement_sink_location): Change heuristic
	for not skipping stores to look for virtual definitions
	rather than uses.

2020-10-07  Andrew MacLeod  <amacleod@redhat.com>

	* value-range.h (irange_allocator::allocate): Allocate in two hunks
	instead of using the variably-sized trailing array approach.

2020-10-07  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fdiagnostics-plain-output): Add
	-fdiagnostics-path-format=separate-events to list of
	options injected by -fdiagnostics-plain-output.
	* opts-common.c (decode_cmdline_options_to_array): Likewise.

2020-10-07  Martin Jambor  <mjambor@suse.cz>

	PR ipa/96394
	* ipa-prop.c (update_indirect_edges_after_inlining): Do not add
	resolved speculation edges to vector of new direct edges even in
	presence of multiple speculative direct edges for a single call.

2020-10-07  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (unspec): Add UNSPEC_ADDPTR.
	(addptrdi3): Add SGPR alternative.

2020-10-07  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (add_filepath_AT_string): New function.
	(asm_outputs_debug_line_str): Likewise.
	(add_filename_attribute): Likewise.
	(add_comp_dir_attribute): Call add_filepath_AT_string.
	(gen_compile_unit_die): Call add_filename_attribute for name.
	(init_sections_and_labels): Init debug_line_str_section when
	asm_outputs_debug_line_str return true.
	(dwarf2out_early_finish): Remove DW_AT_name and DW_AT_comp_dir
	hack and call add_filename_attribute for the remap_debug_filename.

2020-10-07  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac (HAVE_AS_GDWARF_5_DEBUG_FLAG,
	HAVE_AS_WORKING_DWARF_4_FLAG): New tests.
	* gcc.c (ASM_DEBUG_DWARF_OPTION): Define.
	(ASM_DEBUG_SPEC): Use ASM_DEBUG_DWARF_OPTION instead of
	"--gdwarf2".  Use %{cond:opt1;:opt2} style.
	(ASM_DEBUG_OPTION_DWARF_OPT): Define.
	(ASM_DEBUG_OPTION_SPEC): Define.
	(asm_debug_option): New variable.
	(asm_options): Add "%(asm_debug_option)".
	(static_specs): Add asm_debug_option entry.
	(static_spec_functions): Add dwarf-version-gt.
	(debug_level_greater_than_spec_func): New function.
	* config/darwin.h (ASM_DEBUG_OPTION_SPEC): Define.
	* config/darwin9.h (ASM_DEBUG_OPTION_SPEC): Redefine.
	* config.in: Regenerated.
	* configure: Regenerated.

2020-10-07  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/97305
	* optc-save-gen.awk: Don't declare mask variable if explicit_mask
	array is not present.

2020-10-07  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_simd): Don't emit MIN_EXPR and PLUS_EXPR
	at the end of entry_bb and innermost init_bb, instead force arguments
	for MIN_EXPR into temporaries in both cases and jump to a new bb that
	performs MIN_EXPR and PLUS_EXPR.

2020-10-07  Tom de Vries  <tdevries@suse.de>

	* tree-ssa-loop-ch.c (ch_base::copy_headers): Add missing NULL test
	for dump_file.

2020-10-06  Andrew MacLeod  <amacleod@redhat.com>

	* flag-types.h (enum evrp_mode): New enumerated type EVRP_MODE_*.
	* common.opt (fevrp-mode): New undocumented flag.
	* gimple-ssa-evrp.c: Include gimple-range.h
	(class rvrp_folder): EVRP folding using ranger exclusively.
	(rvrp_folder::rvrp_folder): New.
	(rvrp_folder::~rvrp_folder): New.
	(rvrp_folder::value_of_expr): New.  Use rangers value_of_expr.
	(rvrp_folder::value_on_edge): New.  Use rangers value_on_edge.
	(rvrp_folder::value_of_Stmt): New.  Use rangers value_of_stmt.
	(rvrp_folder::fold_stmt): New.  Call the simplifier.
	(class hybrid_folder): EVRP folding using both engines.
	(hybrid_folder::hybrid_folder): New.
	(hybrid_folder::~hybrid_folder): New.
	(hybrid_folder::fold_stmt): New.  Simplify with one engne, then the
	other.
	(hybrid_folder::value_of_expr): New.  Use both value routines.
	(hybrid_folder::value_on_edge): New.  Use both value routines.
	(hybrid_folder::value_of_stmt): New.  Use both value routines.
	(hybrid_folder::choose_value): New.  Choose between range_analzyer and
	rangers values.
	(execute_early_vrp): Choose a folder based on flag_evrp_mode.
	* vr-values.c (simplify_using_ranges::fold_cond): Try range_of_stmt
	first to see if it returns a value.
	(simplify_using_ranges::simplify_switch_using_ranges): Return true if
	any changes were made to the switch.

2020-10-06  Andrew MacLeod  <amacleod@redhat.com>

	* Makefile.in (OBJS): Add gimple-range*.o.
	* gimple-range.h: New file.
	* gimple-range.cc: New file.
	* gimple-range-cache.h: New file.
	* gimple-range-cache.cc: New file.
	* gimple-range-edge.h: New file.
	* gimple-range-edge.cc: New file.
	* gimple-range-gori.h: New file.
	* gimple-range-gori.cc: New file.

2020-10-06  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm.c (arm_preferred_simd_mode): Enable MVE SIMD modes.

2020-10-06  Tom de Vries  <tdevries@suse.de>

	PR middle-end/90861
	* gimplify.c (gimplify_bind_expr): Handle lookup in
	oacc_declare_returns using key with decl-expr.

2020-10-06  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/iterators.md (MVE_types): Move mode iterator from mve.md to
	iterators.md.
	(MVE_VLD_ST): Likewise.
	(MVE_0): Likewise.
	(MVE_1): Likewise.
	(MVE_3): Likewise.
	(MVE_2): Likewise.
	(MVE_5): Likewise.
	(MVE_6): Likewise.
	(MVE_CNVT): Move mode attribute iterator from mve.md to iterators.md.
	(MVE_LANES): Likewise.
	(MVE_constraint): Likewise.
	(MVE_constraint1): Likewise.
	(MVE_constraint2): Likewise.
	(MVE_constraint3): Likewise.
	(MVE_pred): Likewise.
	(MVE_pred1): Likewise.
	(MVE_pred2): Likewise.
	(MVE_pred3): Likewise.
	(MVE_B_ELEM): Likewise.
	(MVE_H_ELEM): Likewise.
	(V_sz_elem1): Likewise.
	(V_extr_elem): Likewise.
	(earlyclobber_32): Likewise.
	(supf): Move int attribute from mve.md to iterators.md.
	(mode1): Likewise.
	(VCVTQ_TO_F): Move int iterator from mve.md to iterators.md.
	(VMVNQ_N): Likewise.
	(VREV64Q): Likewise.
	(VCVTQ_FROM_F): Likewise.
	(VREV16Q): Likewise.
	(VCVTAQ): Likewise.
	(VMVNQ): Likewise.
	(VDUPQ_N): Likewise.
	(VCLZQ): Likewise.
	(VADDVQ): Likewise.
	(VREV32Q): Likewise.
	(VMOVLBQ): Likewise.
	(VMOVLTQ): Likewise.
	(VCVTPQ): Likewise.
	(VCVTNQ): Likewise.
	(VCVTMQ): Likewise.
	(VADDLVQ): Likewise.
	(VCTPQ): Likewise.
	(VCTPQ_M): Likewise.
	(VCVTQ_N_TO_F): Likewise.
	(VCREATEQ): Likewise.
	(VSHRQ_N): Likewise.
	(VCVTQ_N_FROM_F): Likewise.
	(VADDLVQ_P): Likewise.
	(VCMPNEQ): Likewise.
	(VSHLQ): Likewise.
	(VABDQ): Likewise.
	(VADDQ_N): Likewise.
	(VADDVAQ): Likewise.
	(VADDVQ_P): Likewise.
	(VANDQ): Likewise.
	(VBICQ): Likewise.
	(VBRSRQ_N): Likewise.
	(VCADDQ_ROT270): Likewise.
	(VCADDQ_ROT90): Likewise.
	(VCMPEQQ): Likewise.
	(VCMPEQQ_N): Likewise.
	(VCMPNEQ_N): Likewise.
	(VEORQ): Likewise.
	(VHADDQ): Likewise.
	(VHADDQ_N): Likewise.
	(VHSUBQ): Likewise.
	(VHSUBQ_N): Likewise.
	(VMAXQ): Likewise.
	(VMAXVQ): Likewise.
	(VMINQ): Likewise.
	(VMINVQ): Likewise.
	(VMLADAVQ): Likewise.
	(VMULHQ): Likewise.
	(VMULLBQ_INT): Likewise.
	(VMULLTQ_INT): Likewise.
	(VMULQ): Likewise.
	(VMULQ_N): Likewise.
	(VORNQ): Likewise.
	(VORRQ): Likewise.
	(VQADDQ): Likewise.
	(VQADDQ_N): Likewise.
	(VQRSHLQ): Likewise.
	(VQRSHLQ_N): Likewise.
	(VQSHLQ): Likewise.
	(VQSHLQ_N): Likewise.
	(VQSHLQ_R): Likewise.
	(VQSUBQ): Likewise.
	(VQSUBQ_N): Likewise.
	(VRHADDQ): Likewise.
	(VRMULHQ): Likewise.
	(VRSHLQ): Likewise.
	(VRSHLQ_N): Likewise.
	(VRSHRQ_N): Likewise.
	(VSHLQ_N): Likewise.
	(VSHLQ_R): Likewise.
	(VSUBQ): Likewise.
	(VSUBQ_N): Likewise.
	(VADDLVAQ): Likewise.
	(VBICQ_N): Likewise.
	(VMLALDAVQ): Likewise.
	(VMLALDAVXQ): Likewise.
	(VMOVNBQ): Likewise.
	(VMOVNTQ): Likewise.
	(VORRQ_N): Likewise.
	(VQMOVNBQ): Likewise.
	(VQMOVNTQ): Likewise.
	(VSHLLBQ_N): Likewise.
	(VSHLLTQ_N): Likewise.
	(VRMLALDAVHQ): Likewise.
	(VBICQ_M_N): Likewise.
	(VCVTAQ_M): Likewise.
	(VCVTQ_M_TO_F): Likewise.
	(VQRSHRNBQ_N): Likewise.
	(VABAVQ): Likewise.
	(VSHLCQ): Likewise.
	(VRMLALDAVHAQ): Likewise.
	(VADDVAQ_P): Likewise.
	(VCLZQ_M): Likewise.
	(VCMPEQQ_M_N): Likewise.
	(VCMPEQQ_M): Likewise.
	(VCMPNEQ_M_N): Likewise.
	(VCMPNEQ_M): Likewise.
	(VDUPQ_M_N): Likewise.
	(VMAXVQ_P): Likewise.
	(VMINVQ_P): Likewise.
	(VMLADAVAQ): Likewise.
	(VMLADAVQ_P): Likewise.
	(VMLAQ_N): Likewise.
	(VMLASQ_N): Likewise.
	(VMVNQ_M): Likewise.
	(VPSELQ): Likewise.
	(VQDMLAHQ_N): Likewise.
	(VQRDMLAHQ_N): Likewise.
	(VQRDMLASHQ_N): Likewise.
	(VQRSHLQ_M_N): Likewise.
	(VQSHLQ_M_R): Likewise.
	(VREV64Q_M): Likewise.
	(VRSHLQ_M_N): Likewise.
	(VSHLQ_M_R): Likewise.
	(VSLIQ_N): Likewise.
	(VSRIQ_N): Likewise.
	(VMLALDAVQ_P): Likewise.
	(VQMOVNBQ_M): Likewise.
	(VMOVLTQ_M): Likewise.
	(VMOVNBQ_M): Likewise.
	(VRSHRNTQ_N): Likewise.
	(VORRQ_M_N): Likewise.
	(VREV32Q_M): Likewise.
	(VREV16Q_M): Likewise.
	(VQRSHRNTQ_N): Likewise.
	(VMOVNTQ_M): Likewise.
	(VMOVLBQ_M): Likewise.
	(VMLALDAVAQ): Likewise.
	(VQSHRNBQ_N): Likewise.
	(VSHRNBQ_N): Likewise.
	(VRSHRNBQ_N): Likewise.
	(VMLALDAVXQ_P): Likewise.
	(VQMOVNTQ_M): Likewise.
	(VMVNQ_M_N): Likewise.
	(VQSHRNTQ_N): Likewise.
	(VMLALDAVAXQ): Likewise.
	(VSHRNTQ_N): Likewise.
	(VCVTMQ_M): Likewise.
	(VCVTNQ_M): Likewise.
	(VCVTPQ_M): Likewise.
	(VCVTQ_M_N_FROM_F): Likewise.
	(VCVTQ_M_FROM_F): Likewise.
	(VRMLALDAVHQ_P): Likewise.
	(VADDLVAQ_P): Likewise.
	(VABAVQ_P): Likewise.
	(VSHLQ_M): Likewise.
	(VSRIQ_M_N): Likewise.
	(VSUBQ_M): Likewise.
	(VCVTQ_M_N_TO_F): Likewise.
	(VHSUBQ_M): Likewise.
	(VSLIQ_M_N): Likewise.
	(VRSHLQ_M): Likewise.
	(VMINQ_M): Likewise.
	(VMULLBQ_INT_M): Likewise.
	(VMULHQ_M): Likewise.
	(VMULQ_M): Likewise.
	(VHSUBQ_M_N): Likewise.
	(VHADDQ_M_N): Likewise.
	(VORRQ_M): Likewise.
	(VRMULHQ_M): Likewise.
	(VQADDQ_M): Likewise.
	(VRSHRQ_M_N): Likewise.
	(VQSUBQ_M_N): Likewise.
	(VADDQ_M): Likewise.
	(VORNQ_M): Likewise.
	(VRHADDQ_M): Likewise.
	(VQSHLQ_M): Likewise.
	(VANDQ_M): Likewise.
	(VBICQ_M): Likewise.
	(VSHLQ_M_N): Likewise.
	(VCADDQ_ROT270_M): Likewise.
	(VQRSHLQ_M): Likewise.
	(VQADDQ_M_N): Likewise.
	(VADDQ_M_N): Likewise.
	(VMAXQ_M): Likewise.
	(VQSUBQ_M): Likewise.
	(VMLASQ_M_N): Likewise.
	(VMLADAVAQ_P): Likewise.
	(VBRSRQ_M_N): Likewise.
	(VMULQ_M_N): Likewise.
	(VCADDQ_ROT90_M): Likewise.
	(VMULLTQ_INT_M): Likewise.
	(VEORQ_M): Likewise.
	(VSHRQ_M_N): Likewise.
	(VSUBQ_M_N): Likewise.
	(VHADDQ_M): Likewise.
	(VABDQ_M): Likewise.
	(VMLAQ_M_N): Likewise.
	(VQSHLQ_M_N): Likewise.
	(VMLALDAVAQ_P): Likewise.
	(VMLALDAVAXQ_P): Likewise.
	(VQRSHRNBQ_M_N): Likewise.
	(VQRSHRNTQ_M_N): Likewise.
	(VQSHRNBQ_M_N): Likewise.
	(VQSHRNTQ_M_N): Likewise.
	(VRSHRNBQ_M_N): Likewise.
	(VRSHRNTQ_M_N): Likewise.
	(VSHLLBQ_M_N): Likewise.
	(VSHLLTQ_M_N): Likewise.
	(VSHRNBQ_M_N): Likewise.
	(VSHRNTQ_M_N): Likewise.
	(VSTRWSBQ): Likewise.
	(VSTRBSOQ): Likewise.
	(VSTRBQ): Likewise.
	(VLDRBGOQ): Likewise.
	(VLDRBQ): Likewise.
	(VLDRWGBQ): Likewise.
	(VLD1Q): Likewise.
	(VLDRHGOQ): Likewise.
	(VLDRHGSOQ): Likewise.
	(VLDRHQ): Likewise.
	(VLDRWQ): Likewise.
	(VLDRDGBQ): Likewise.
	(VLDRDGOQ): Likewise.
	(VLDRDGSOQ): Likewise.
	(VLDRWGOQ): Likewise.
	(VLDRWGSOQ): Likewise.
	(VST1Q): Likewise.
	(VSTRHSOQ): Likewise.
	(VSTRHSSOQ): Likewise.
	(VSTRHQ): Likewise.
	(VSTRWQ): Likewise.
	(VSTRDSBQ): Likewise.
	(VSTRDSOQ): Likewise.
	(VSTRDSSOQ): Likewise.
	(VSTRWSOQ): Likewise.
	(VSTRWSSOQ): Likewise.
	(VSTRWSBWBQ): Likewise.
	(VLDRWGBWBQ): Likewise.
	(VSTRDSBWBQ): Likewise.
	(VLDRDGBWBQ): Likewise.
	(VADCIQ): Likewise.
	(VADCIQ_M): Likewise.
	(VSBCQ): Likewise.
	(VSBCQ_M): Likewise.
	(VSBCIQ): Likewise.
	(VSBCIQ_M): Likewise.
	(VADCQ): Likewise.
	(VADCQ_M): Likewise.
	(UQRSHLLQ): Likewise.
	(SQRSHRLQ): Likewise.
	(VSHLCQ_M): Likewise.
	* config/arm/mve.md (MVE_types): Move mode iterator to iterators.md from mve.md.
	(MVE_VLD_ST): Likewise.
	(MVE_0): Likewise.
	(MVE_1): Likewise.
	(MVE_3): Likewise.
	(MVE_2): Likewise.
	(MVE_5): Likewise.
	(MVE_6): Likewise.
	(MVE_CNVT): Move mode attribute iterator to iterators.md from mve.md.
	(MVE_LANES): Likewise.
	(MVE_constraint): Likewise.
	(MVE_constraint1): Likewise.
	(MVE_constraint2): Likewise.
	(MVE_constraint3): Likewise.
	(MVE_pred): Likewise.
	(MVE_pred1): Likewise.
	(MVE_pred2): Likewise.
	(MVE_pred3): Likewise.
	(MVE_B_ELEM): Likewise.
	(MVE_H_ELEM): Likewise.
	(V_sz_elem1): Likewise.
	(V_extr_elem): Likewise.
	(earlyclobber_32): Likewise.
	(supf): Move int attribute to iterators.md from mve.md.
	(mode1): Likewise.
	(VCVTQ_TO_F): Move int iterator to iterators.md from mve.md.
	(VMVNQ_N): Likewise.
	(VREV64Q): Likewise.
	(VCVTQ_FROM_F): Likewise.
	(VREV16Q): Likewise.
	(VCVTAQ): Likewise.
	(VMVNQ): Likewise.
	(VDUPQ_N): Likewise.
	(VCLZQ): Likewise.
	(VADDVQ): Likewise.
	(VREV32Q): Likewise.
	(VMOVLBQ): Likewise.
	(VMOVLTQ): Likewise.
	(VCVTPQ): Likewise.
	(VCVTNQ): Likewise.
	(VCVTMQ): Likewise.
	(VADDLVQ): Likewise.
	(VCTPQ): Likewise.
	(VCTPQ_M): Likewise.
	(VCVTQ_N_TO_F): Likewise.
	(VCREATEQ): Likewise.
	(VSHRQ_N): Likewise.
	(VCVTQ_N_FROM_F): Likewise.
	(VADDLVQ_P): Likewise.
	(VCMPNEQ): Likewise.
	(VSHLQ): Likewise.
	(VABDQ): Likewise.
	(VADDQ_N): Likewise.
	(VADDVAQ): Likewise.
	(VADDVQ_P): Likewise.
	(VANDQ): Likewise.
	(VBICQ): Likewise.
	(VBRSRQ_N): Likewise.
	(VCADDQ_ROT270): Likewise.
	(VCADDQ_ROT90): Likewise.
	(VCMPEQQ): Likewise.
	(VCMPEQQ_N): Likewise.
	(VCMPNEQ_N): Likewise.
	(VEORQ): Likewise.
	(VHADDQ): Likewise.
	(VHADDQ_N): Likewise.
	(VHSUBQ): Likewise.
	(VHSUBQ_N): Likewise.
	(VMAXQ): Likewise.
	(VMAXVQ): Likewise.
	(VMINQ): Likewise.
	(VMINVQ): Likewise.
	(VMLADAVQ): Likewise.
	(VMULHQ): Likewise.
	(VMULLBQ_INT): Likewise.
	(VMULLTQ_INT): Likewise.
	(VMULQ): Likewise.
	(VMULQ_N): Likewise.
	(VORNQ): Likewise.
	(VORRQ): Likewise.
	(VQADDQ): Likewise.
	(VQADDQ_N): Likewise.
	(VQRSHLQ): Likewise.
	(VQRSHLQ_N): Likewise.
	(VQSHLQ): Likewise.
	(VQSHLQ_N): Likewise.
	(VQSHLQ_R): Likewise.
	(VQSUBQ): Likewise.
	(VQSUBQ_N): Likewise.
	(VRHADDQ): Likewise.
	(VRMULHQ): Likewise.
	(VRSHLQ): Likewise.
	(VRSHLQ_N): Likewise.
	(VRSHRQ_N): Likewise.
	(VSHLQ_N): Likewise.
	(VSHLQ_R): Likewise.
	(VSUBQ): Likewise.
	(VSUBQ_N): Likewise.
	(VADDLVAQ): Likewise.
	(VBICQ_N): Likewise.
	(VMLALDAVQ): Likewise.
	(VMLALDAVXQ): Likewise.
	(VMOVNBQ): Likewise.
	(VMOVNTQ): Likewise.
	(VORRQ_N): Likewise.
	(VQMOVNBQ): Likewise.
	(VQMOVNTQ): Likewise.
	(VSHLLBQ_N): Likewise.
	(VSHLLTQ_N): Likewise.
	(VRMLALDAVHQ): Likewise.
	(VBICQ_M_N): Likewise.
	(VCVTAQ_M): Likewise.
	(VCVTQ_M_TO_F): Likewise.
	(VQRSHRNBQ_N): Likewise.
	(VABAVQ): Likewise.
	(VSHLCQ): Likewise.
	(VRMLALDAVHAQ): Likewise.
	(VADDVAQ_P): Likewise.
	(VCLZQ_M): Likewise.
	(VCMPEQQ_M_N): Likewise.
	(VCMPEQQ_M): Likewise.
	(VCMPNEQ_M_N): Likewise.
	(VCMPNEQ_M): Likewise.
	(VDUPQ_M_N): Likewise.
	(VMAXVQ_P): Likewise.
	(VMINVQ_P): Likewise.
	(VMLADAVAQ): Likewise.
	(VMLADAVQ_P): Likewise.
	(VMLAQ_N): Likewise.
	(VMLASQ_N): Likewise.
	(VMVNQ_M): Likewise.
	(VPSELQ): Likewise.
	(VQDMLAHQ_N): Likewise.
	(VQRDMLAHQ_N): Likewise.
	(VQRDMLASHQ_N): Likewise.
	(VQRSHLQ_M_N): Likewise.
	(VQSHLQ_M_R): Likewise.
	(VREV64Q_M): Likewise.
	(VRSHLQ_M_N): Likewise.
	(VSHLQ_M_R): Likewise.
	(VSLIQ_N): Likewise.
	(VSRIQ_N): Likewise.
	(VMLALDAVQ_P): Likewise.
	(VQMOVNBQ_M): Likewise.
	(VMOVLTQ_M): Likewise.
	(VMOVNBQ_M): Likewise.
	(VRSHRNTQ_N): Likewise.
	(VORRQ_M_N): Likewise.
	(VREV32Q_M): Likewise.
	(VREV16Q_M): Likewise.
	(VQRSHRNTQ_N): Likewise.
	(VMOVNTQ_M): Likewise.
	(VMOVLBQ_M): Likewise.
	(VMLALDAVAQ): Likewise.
	(VQSHRNBQ_N): Likewise.
	(VSHRNBQ_N): Likewise.
	(VRSHRNBQ_N): Likewise.
	(VMLALDAVXQ_P): Likewise.
	(VQMOVNTQ_M): Likewise.
	(VMVNQ_M_N): Likewise.
	(VQSHRNTQ_N): Likewise.
	(VMLALDAVAXQ): Likewise.
	(VSHRNTQ_N): Likewise.
	(VCVTMQ_M): Likewise.
	(VCVTNQ_M): Likewise.
	(VCVTPQ_M): Likewise.
	(VCVTQ_M_N_FROM_F): Likewise.
	(VCVTQ_M_FROM_F): Likewise.
	(VRMLALDAVHQ_P): Likewise.
	(VADDLVAQ_P): Likewise.
	(VABAVQ_P): Likewise.
	(VSHLQ_M): Likewise.
	(VSRIQ_M_N): Likewise.
	(VSUBQ_M): Likewise.
	(VCVTQ_M_N_TO_F): Likewise.
	(VHSUBQ_M): Likewise.
	(VSLIQ_M_N): Likewise.
	(VRSHLQ_M): Likewise.
	(VMINQ_M): Likewise.
	(VMULLBQ_INT_M): Likewise.
	(VMULHQ_M): Likewise.
	(VMULQ_M): Likewise.
	(VHSUBQ_M_N): Likewise.
	(VHADDQ_M_N): Likewise.
	(VORRQ_M): Likewise.
	(VRMULHQ_M): Likewise.
	(VQADDQ_M): Likewise.
	(VRSHRQ_M_N): Likewise.
	(VQSUBQ_M_N): Likewise.
	(VADDQ_M): Likewise.
	(VORNQ_M): Likewise.
	(VRHADDQ_M): Likewise.
	(VQSHLQ_M): Likewise.
	(VANDQ_M): Likewise.
	(VBICQ_M): Likewise.
	(VSHLQ_M_N): Likewise.
	(VCADDQ_ROT270_M): Likewise.
	(VQRSHLQ_M): Likewise.
	(VQADDQ_M_N): Likewise.
	(VADDQ_M_N): Likewise.
	(VMAXQ_M): Likewise.
	(VQSUBQ_M): Likewise.
	(VMLASQ_M_N): Likewise.
	(VMLADAVAQ_P): Likewise.
	(VBRSRQ_M_N): Likewise.
	(VMULQ_M_N): Likewise.
	(VCADDQ_ROT90_M): Likewise.
	(VMULLTQ_INT_M): Likewise.
	(VEORQ_M): Likewise.
	(VSHRQ_M_N): Likewise.
	(VSUBQ_M_N): Likewise.
	(VHADDQ_M): Likewise.
	(VABDQ_M): Likewise.
	(VMLAQ_M_N): Likewise.
	(VQSHLQ_M_N): Likewise.
	(VMLALDAVAQ_P): Likewise.
	(VMLALDAVAXQ_P): Likewise.
	(VQRSHRNBQ_M_N): Likewise.
	(VQRSHRNTQ_M_N): Likewise.
	(VQSHRNBQ_M_N): Likewise.
	(VQSHRNTQ_M_N): Likewise.
	(VRSHRNBQ_M_N): Likewise.
	(VRSHRNTQ_M_N): Likewise.
	(VSHLLBQ_M_N): Likewise.
	(VSHLLTQ_M_N): Likewise.
	(VSHRNBQ_M_N): Likewise.
	(VSHRNTQ_M_N): Likewise.
	(VSTRWSBQ): Likewise.
	(VSTRBSOQ): Likewise.
	(VSTRBQ): Likewise.
	(VLDRBGOQ): Likewise.
	(VLDRBQ): Likewise.
	(VLDRWGBQ): Likewise.
	(VLD1Q): Likewise.
	(VLDRHGOQ): Likewise.
	(VLDRHGSOQ): Likewise.
	(VLDRHQ): Likewise.
	(VLDRWQ): Likewise.
	(VLDRDGBQ): Likewise.
	(VLDRDGOQ): Likewise.
	(VLDRDGSOQ): Likewise.
	(VLDRWGOQ): Likewise.
	(VLDRWGSOQ): Likewise.
	(VST1Q): Likewise.
	(VSTRHSOQ): Likewise.
	(VSTRHSSOQ): Likewise.
	(VSTRHQ): Likewise.
	(VSTRWQ): Likewise.
	(VSTRDSBQ): Likewise.
	(VSTRDSOQ): Likewise.
	(VSTRDSSOQ): Likewise.
	(VSTRWSOQ): Likewise.
	(VSTRWSSOQ): Likewise.
	(VSTRWSBWBQ): Likewise.
	(VLDRWGBWBQ): Likewise.
	(VSTRDSBWBQ): Likewise.
	(VLDRDGBWBQ): Likewise.
	(VADCIQ): Likewise.
	(VADCIQ_M): Likewise.
	(VSBCQ): Likewise.
	(VSBCQ_M): Likewise.
	(VSBCIQ): Likewise.
	(VSBCIQ_M): Likewise.
	(VADCQ): Likewise.
	(VADCQ_M): Likewise.
	(UQRSHLLQ): Likewise.
	(SQRSHRLQ): Likewise.
	(VSHLCQ_M): Likewise.
	(define_c_enum "unspec"): Move MVE enumerator to unspecs.md from mve.md.
	* config/arm/unspecs.md (define_c_enum "unspec"): Move MVE enumerator from
	mve.md to unspecs.md.

2020-10-06  Martin Liska  <mliska@suse.cz>

	* common.opt: Remove -fdbg-cnt-list from deferred options.
	* dbgcnt.c (dbg_cnt_set_limit_by_index): Make a copy
	to original_limits.
	(dbg_cnt_list_all_counters): Print also current counter value
	and print to stderr.
	* opts-global.c (handle_common_deferred_options): Do not handle
	-fdbg-cnt-list.
	* opts.c (common_handle_option): Likewise.
	* toplev.c (finalize): Handle it after compilation here.

2020-10-06  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (dbg_cnt): Report also upper limit.

2020-10-06  Tom de Vries  <tdevries@suse.de>

	* tracer.c (count_insns): Rename to ...
	(analyze_bb): ... this.
	(cache_can_duplicate_bb_p, cached_can_duplicate_bb_p): New function.
	(ignore_bb_p): Use cached_can_duplicate_bb_p.
	(tail_duplicate): Call cache_can_duplicate_bb_p.

2020-10-06  Tom de Vries  <tdevries@suse.de>

	* tracer.c (can_duplicate_insn_p, can_duplicate_bb_no_insn_iter_p)
	(can_duplicate_bb_p): New function, factored out of ...
	(ignore_bb_p): ... here.

2020-10-06  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/97282
	* tree-ssa-math-opts.c (divmod_candidate_p): Don't return false for
	constant op2 if it is not a power of two and the type has precision
	larger than HOST_BITS_PER_WIDE_INT or BITS_PER_WORD.
	* internal-fn.c (contains_call_div_mod): New function.
	(expand_DIVMOD): If last argument is a constant, try to expand it as
	TRUNC_DIV_EXPR followed by TRUNC_MOD_EXPR, but if the sequence
	contains any calls or {,U}{DIV,MOD} rtxes, throw it away and use
	divmod optab or divmod libfunc.

2020-10-06  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.h (irange_allocator::allocate): Increase
	newir storage by one.

2020-10-06  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/97289
	* omp-offload.c (omp_discover_declare_target_tgt_fn_r): Only follow
	node->alias_target if it is a FUNCTION_DECL.

2020-10-06  Joe Ramsay  <joe.ramsay@arm.com>

	* config/arm/arm-cpus.in:
	(ALL_FPU_INTERNAL): Remove vfp_base.
	(VFPv2): Remove vfp_base.
	(MVE): Remove vfp_base.
	(vfp_base): Redefine as implied bit dependent on MVE or FP
	(cortex-m55): Add flags to disable MVE, MVE FP, FP and DSP extensions.
	* config/arm/arm.c (arm_configure_build_target): Add implied bits to ISA.
	* config/arm/parsecpu.awk:
	(gen_isa): Print implied bits and their dependencies to ISA header.
	(gen_data): Add parsing for implied feature bits.

2020-10-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	* doc/invoke.texi: Add z15/arch13 to the list of documented
	-march/-mtune options.

2020-10-05  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.cc (irange::legacy_intersect): Only handle
	legacy ranges.
	(irange::legacy_union): Same.
	(irange::union_): When unioning legacy with non-legacy,
	first convert to legacy and do everything in legacy mode.
	(irange::intersect): Same, but for intersect.
	* range-op.cc (range_tests): Adjust for above changes.

2020-10-05  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (operator_div::wi_fold): Return varying for
	division by zero.
	(class operator_rshift): Move class up.
	(operator_abs::wi_fold): Return [-MIN,-MIN] for ABS([-MIN,-MIN]).
	(operator_tests): Adjust tests.

2020-10-05  Tom de Vries  <tdevries@suse.de>

	* tracer.c (ignore_bb_p): Ignore GOMP_SIMT_XCHG_*.

2020-10-05  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm-cpus.in (neoverse-v1): Add missing vendor and
	part numbers.

2020-10-05  Tom de Vries  <tdevries@suse.de>

	* tracer.c (ignore_bb_p): Remove incorrect suggestion.

2020-10-05  Jakub Jelinek  <jakub@redhat.com>

	* opth-gen.awk: Don't emit explicit_mask array if n_target_explicit
	is equal to n_target_explicit_mask.
	* optc-save-gen.awk: Compute has_target_explicit_mask and if false,
	don't emit code iterating over explicit_mask array elements.  Stream
	also explicit_mask_* target members.

2020-10-05  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-store-merging.c
	(imm_store_chain_info::output_merged_store): Use ~0U instead of ~0 in
	unsigned int array initializer.

2020-10-05  Tom de Vries  <tdevries@suse.de>

	PR fortran/95654
	* tracer.c (ignore_bb_p): Ignore GOMP_SIMT_ENTER_ALLOC,
	GOMP_SIMT_VOTE_ANY and GOMP_SIMT_EXIT.

2020-10-03  Jakub Jelinek  <jakub@redhat.com>

	* opth-gen.awk: For variables referenced in Mask and InverseMask,
	don't use the explicit_mask bitmask array, but add separate
	explicit_mask_* members with the same types as the variables.
	* optc-save-gen.awk: Save, restore, compare and hash the separate
	explicit_mask_* members.

2020-10-03  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref-tree.c (test_insert_search_collapse): Update andling
	of accesses.
	(test_merge): Likewise.
	* ipa-modref-tree.h (struct modref_access_node): Add offset, size,
	max_size, parm_offset and parm_offset_known.
	(modref_access_node::useful_p): Constify.
	(modref_access_node::range_info_useful_p): New predicate.
	(modref_access_node::operator==): New.
	(struct modref_parm_map): New structure.
	(modref_tree::merge): Update for racking parameters)
	* ipa-modref.c (dump_access): Dump new fields.
	(get_access): Fill in new fields.
	(merge_call_side_effects): Update handling of parm map.
	(write_modref_records): Stream new fields.
	(read_modref_records): Stream new fields.
	(compute_parm_map): Update for new parm map.
	(ipa_merge_modref_summary_after_inlining): Update.
	(modref_propagate_in_scc): Update.
	* tree-ssa-alias.c (modref_may_conflict): Handle known ranges.

2020-10-03  H.J. Lu  <hjl.tools@gmail.com>

	PR other/97280
	* doc/extend.texi: Replace roudnevenl with roundevenl

2020-10-02  David Edelsohn  <dje.gcc@gmail.com>
	    Andrew MacLeod  <amacleod@redhat.com>

	* config/rs6000/rs6000.c: Include ssa.h. Reorder some headers.
	* config/rs6000/rs6000-call.c: Same.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* params.opt (ipa-cp-large-unit-insns): New parameter.
	* ipa-cp.c (get_max_overall_size): Use the new parameter.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* ipa-cp.c (estimate_local_effects): Add overeall_size to dumped
	string.
	(decide_about_value): Add dumping new overall_size.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* ipa-fnsummary.h (ipa_freqcounting_predicate): New type.
	(ipa_fn_summary): Change the type of loop_iterations and loop_strides
	to vectors of ipa_freqcounting_predicate.
	(ipa_fn_summary::ipa_fn_summary): Construct the new vectors.
	(ipa_call_estimates): New fields loops_with_known_iterations and
	loops_with_known_strides.
	* ipa-cp.c (hint_time_bonus): Multiply param_ipa_cp_loop_hint_bonus
	with the expected frequencies of loops with known iteration count or
	stride.
	* ipa-fnsummary.c (add_freqcounting_predicate): New function.
	(ipa_fn_summary::~ipa_fn_summary): Release the new vectors instead of
	just two predicates.
	(remap_hint_predicate_after_duplication): Replace with function
	remap_freqcounting_preds_after_dup.
	(ipa_fn_summary_t::duplicate): Use it or duplicate new vectors.
	(ipa_dump_fn_summary): Dump the new vectors.
	(analyze_function_body): Compute the loop property vectors.
	(ipa_call_context::estimate_size_and_time): Calculate also
	loops_with_known_iterations and loops_with_known_strides.  Adjusted
	dumping accordinly.
	(remap_hint_predicate): Replace with function
	remap_freqcounting_predicate.
	(ipa_merge_fn_summary_after_inlining): Use it.
	(inline_read_section): Stream loopcounting vectors instead of two
	simple predicates.
	(ipa_fn_summary_write): Likewise.
	* params.opt (ipa-max-loop-predicates): New parameter.
	* doc/invoke.texi (ipa-max-loop-predicates): Document new param.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* ipa-inline-analysis.c (do_estimate_edge_time): Adjusted to use
	ipa_call_estimates.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.
	* ipa-fnsummary.h (struct ipa_call_estimates): New type.
	(ipa_call_context::estimate_size_and_time): Adjusted declaration.
	(estimate_ipcp_clone_size_and_time): Likewise.
	* ipa-cp.c (hint_time_bonus): Changed the type of the second argument
	to ipa_call_estimates.
	(perform_estimation_of_a_value): Adjusted to use ipa_call_estimates.
	(estimate_local_effects): Likewise.
	* ipa-fnsummary.c (ipa_call_context::estimate_size_and_time): Adjusted
	to return estimates in a single ipa_call_estimates parameter.
	(estimate_ipcp_clone_size_and_time): Likewise.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* ipa-fnsummary.h (ipa_cached_call_context): New forward declaration
	and class.
	(class ipa_call_context): Make friend ipa_cached_call_context.  Moved
	methods duplicate_from and release to it too.
	* ipa-fnsummary.c (ipa_call_context::duplicate_from): Moved to class
	ipa_cached_call_context.
	(ipa_call_context::release): Likewise, removed the parameter.
	* ipa-inline-analysis.c (node_context_cache_entry): Change the type of
	ctx to ipa_cached_call_context.
	(do_estimate_edge_time): Remove parameter from the call to
	ipa_cached_call_context::release.

2020-10-02  Martin Jambor  <mjambor@suse.cz>

	* ipa-prop.h (ipa_auto_call_arg_values): New type.
	(class ipa_call_arg_values): Likewise.
	(ipa_get_indirect_edge_target): Replaced vector arguments with
	ipa_call_arg_values in declaration.  Added an overload for
	ipa_auto_call_arg_values.
	* ipa-fnsummary.h (ipa_call_context): Removed members m_known_vals,
	m_known_contexts, m_known_aggs, duplicate_from, release and equal_to,
	new members m_avals, store_to_cache and equivalent_to_p.  Adjusted
	construcotr arguments.
	(estimate_ipcp_clone_size_and_time): Replaced vector arguments
	with ipa_auto_call_arg_values in declaration.
	(evaluate_properties_for_edge): Likewise.
	* ipa-cp.c (ipa_get_indirect_edge_target): Adjusted to work on
	ipa_call_arg_values rather than on separate vectors.  Added an
	overload for ipa_auto_call_arg_values.
	(devirtualization_time_bonus): Adjusted to work on
	ipa_auto_call_arg_values rather than on separate vectors.
	(gather_context_independent_values): Adjusted to work on
	ipa_auto_call_arg_values rather than on separate vectors.
	(perform_estimation_of_a_value): Likewise.
	(estimate_local_effects): Likewise.
	(modify_known_vectors_with_val): Adjusted both variants to work on
	ipa_auto_call_arg_values and rename them to
	copy_known_vectors_add_val.
	(decide_about_value): Adjusted to work on ipa_call_arg_values rather
	than on separate vectors.
	(decide_whether_version_node): Likewise.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Likewise.
	(evaluate_properties_for_edge): Likewise.
	(ipa_fn_summary_t::duplicate): Likewise.
	(estimate_edge_devirt_benefit): Adjusted to work on
	ipa_call_arg_values rather than on separate vectors.
	(estimate_edge_size_and_time): Likewise.
	(estimate_calls_size_and_time_1): Likewise.
	(summarize_calls_size_and_time): Adjusted calls to
	estimate_edge_size_and_time.
	(estimate_calls_size_and_time): Adjusted to work on
	ipa_call_arg_values rather than on separate vectors.
	(ipa_call_context::ipa_call_context): Construct from a pointer to
	ipa_auto_call_arg_values instead of inividual vectors.
	(ipa_call_context::duplicate_from): Adjusted to access vectors within
	m_avals.
	(ipa_call_context::release): Likewise.
	(ipa_call_context::equal_to): Likewise.
	(ipa_call_context::estimate_size_and_time): Adjusted to work on
	ipa_call_arg_values rather than on separate vectors.
	(estimate_ipcp_clone_size_and_time): Adjusted to work with
	ipa_auto_call_arg_values rather than on separate vectors.
	(ipa_merge_fn_summary_after_inlining): Likewise.  Adjusted call to
	estimate_edge_size_and_time.
	(ipa_update_overall_fn_summary): Adjusted call to
	estimate_edge_size_and_time.
	* ipa-inline-analysis.c (do_estimate_edge_time): Adjusted to work with
	ipa_auto_call_arg_values rather than with separate vectors.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.
	* ipa-prop.c (ipa_auto_call_arg_values::~ipa_auto_call_arg_values):
	New destructor.

2020-10-02  Joe Ramsay  <joe.ramsay@arm.com>

	* config/arm/arm_mve.h (__arm_vmaxnmavq): Remove coercion of scalar
	argument.
	(__arm_vmaxnmvq): Likewise.
	(__arm_vminnmavq): Likewise.
	(__arm_vminnmvq): Likewise.
	(__arm_vmaxnmavq_p): Likewise.
	(__arm_vmaxnmvq_p): Likewise (and delete duplicate definition).
	(__arm_vminnmavq_p): Likewise.
	(__arm_vminnmvq_p): Likewise.
	(__arm_vmaxavq): Likewise.
	(__arm_vmaxavq_p): Likewise.
	(__arm_vmaxvq): Likewise.
	(__arm_vmaxvq_p): Likewise.
	(__arm_vminavq): Likewise.
	(__arm_vminavq_p): Likewise.
	(__arm_vminvq): Likewise.
	(__arm_vminvq_p): Likewise.

2020-10-02  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (neoversev1_tunings): Define.
	* config/aarch64/aarch64-cores.def (zeus): Use it.
	(neoverse-v1): Likewise.

2020-10-02  Jan Hubicka  <hubicka@ucw.cz>

	* attr-fnspec.h: Update documentation.
	(attr_fnsec::return_desc_size): Set to 2
	(attr_fnsec::arg_desc_size): Set to 2
	* builtin-attrs.def (STR1): Update fnspec.
	* internal-fn.def (UBSAN_NULL): Update fnspec.
	(UBSAN_VPTR): Update fnspec.
	(UBSAN_PTR): Update fnspec.
	(ASAN_CHECK): Update fnspec.
	(GOACC_DIM_SIZE): Remove fnspec.
	(GOACC_DIM_POS): Remove fnspec.
	* tree-ssa-alias.c (attr_fnspec::verify): Update verification.

2020-10-02  Jan Hubicka  <jh@suse.cz>

	* attr-fnspec.h: New file.
	* calls.c (decl_return_flags): Use attr_fnspec.
	* gimple.c (gimple_call_arg_flags): Use attr_fnspec.
	(gimple_call_return_flags): Use attr_fnspec.
	* tree-into-ssa.c (pass_build_ssa::execute): Use attr_fnspec.
	* tree-ssa-alias.c (attr_fnspec::verify): New member fuction.

2020-10-02  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (ao_ref_init_from_ptr_and_range): Break out from ...
	(ao_ref_init_from_ptr_and_size): ... here.

2020-10-02  Jan Hubicka  <hubicka@ucw.cz>

	* data-streamer-in.c (streamer_read_poly_int64): New function.
	* data-streamer-out.c (streamer_write_poly_int64): New function.
	* data-streamer.h (streamer_write_poly_int64): Declare.
	(streamer_read_poly_int64): Declare.

2020-10-02  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve_pred_dominates_p):
	Delete.
	* config/aarch64/aarch64.c (aarch64_sve_pred_dominates_p): Likewise.
	* config/aarch64/aarch64-sve.md: Add banner comment describing
	how merging predicated FP operations are represented.
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_2): Split into...
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_2_relaxed): ...this and...
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_2_strict): ...this.
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_any_relaxed): ...this and...
	(*cond_<SVE_COND_FP_UNARY:optab><mode>_any_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2): Split into...
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2_relaxed): ...this and...
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any_relaxed): ...this
	and...
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_2): Split into...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_2_relaxed): ...this and...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_2_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const): Split into...
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const_relaxed): ...this
	and...
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_3): Split into...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_3_relaxed): ...this and...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_3_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_any_relaxed): ...this and...
	(*cond_<SVE_COND_FP_BINARY:optab><mode>_any_strict): ...this.
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const): Split into...
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const_relaxed): ...this
	and...
	(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const_strict): ...this.
	(*cond_add<mode>_2_const): Split into...
	(*cond_add<mode>_2_const_relaxed): ...this and...
	(*cond_add<mode>_2_const_strict): ...this.
	(*cond_add<mode>_any_const): Split into...
	(*cond_add<mode>_any_const_relaxed): ...this and...
	(*cond_add<mode>_any_const_strict): ...this.
	(*cond_<SVE_COND_FCADD:optab><mode>_2): Split into...
	(*cond_<SVE_COND_FCADD:optab><mode>_2_relaxed): ...this and...
	(*cond_<SVE_COND_FCADD:optab><mode>_2_strict): ...this.
	(*cond_<SVE_COND_FCADD:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FCADD:optab><mode>_any_relaxed): ...this and...
	(*cond_<SVE_COND_FCADD:optab><mode>_any_strict): ...this.
	(*cond_sub<mode>_3_const): Split into...
	(*cond_sub<mode>_3_const_relaxed): ...this and...
	(*cond_sub<mode>_3_const_strict): ...this.
	(*aarch64_pred_abd<mode>): Split into...
	(*aarch64_pred_abd<mode>_relaxed): ...this and...
	(*aarch64_pred_abd<mode>_strict): ...this.
	(*aarch64_cond_abd<mode>_2): Split into...
	(*aarch64_cond_abd<mode>_2_relaxed): ...this and...
	(*aarch64_cond_abd<mode>_2_strict): ...this.
	(*aarch64_cond_abd<mode>_3): Split into...
	(*aarch64_cond_abd<mode>_3_relaxed): ...this and...
	(*aarch64_cond_abd<mode>_3_strict): ...this.
	(*aarch64_cond_abd<mode>_any): Split into...
	(*aarch64_cond_abd<mode>_any_relaxed): ...this and...
	(*aarch64_cond_abd<mode>_any_strict): ...this.
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2): Split into...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2_relaxed): ...this and...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2_strict): ...this.
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4): Split into...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4_relaxed): ...this and...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4_strict): ...this.
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any_relaxed): ...this and...
	(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any_strict): ...this.
	(*cond_<SVE_COND_FCMLA:optab><mode>_4): Split into...
	(*cond_<SVE_COND_FCMLA:optab><mode>_4_relaxed): ...this and...
	(*cond_<SVE_COND_FCMLA:optab><mode>_4_strict): ...this.
	(*cond_<SVE_COND_FCMLA:optab><mode>_any): Split into...
	(*cond_<SVE_COND_FCMLA:optab><mode>_any_relaxed): ...this and...
	(*cond_<SVE_COND_FCMLA:optab><mode>_any_strict): ...this.
	(*aarch64_pred_fac<cmp_op><mode>): Split into...
	(*aarch64_pred_fac<cmp_op><mode>_relaxed): ...this and...
	(*aarch64_pred_fac<cmp_op><mode>_strict): ...this.
	(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>): Split
	into...
	(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>_relaxed):
	...this and...
	(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>_strict):
	...this.
	(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>): Split
	into...
	(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>_relaxed):
	...this and...
	(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>_strict):
	...this.
	* config/aarch64/aarch64-sve2.md
	(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>): Split into...
	(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>_relaxed): ...this and...
	(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>_strict): ...this.
	(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any): Split into...
	(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any_relaxed): ...this
	and...
	(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any_strict): ...this.
	(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>): Split into...
	(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>_relaxed): ...this and...
	(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>_strict): ...this.

2020-10-02  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/neon.md (*sub<VDQ:mode>3_neon): Use the new mode macros
	for the insn condition.
	(sub<VH:mode>3, *mul<VDQW:mode>3_neon): Likewise.
	(mul<VDQW:mode>3add<VDQW:mode>_neon): Likewise.
	(mul<VH:mode>3add<VH:mode>_neon): Likewise.
	(mul<VDQW:mode>3neg<VDQW:mode>add<VDQW:mode>_neon): Likewise.
	(fma<VCVTF:mode>4, fma<VH:mode>4, *fmsub<VCVTF:mode>4): Likewise.
	(quad_halves_<code>v4sf, reduc_plus_scal_<VD:mode>): Likewise.
	(reduc_plus_scal_<VQ:mode>, reduc_smin_scal_<VD:mode>): Likewise.
	(reduc_smin_scal_<VQ:mode>, reduc_smax_scal_<VD:mode>): Likewise.
	(reduc_smax_scal_<VQ:mode>, mul<VH:mode>3): Likewise.
	(neon_vabd<VF:mode>_2, neon_vabd<VF:mode>_3): Likewise.
	(fma<VH:mode>4_intrinsic): Delete.
	(neon_vadd<VCVTF:mode>): Use the new mode macros to decide which
	form of instruction to generate.
	(neon_vmla<VDQW:mode>, neon_vmls<VDQW:mode>): Likewise.
	(neon_vsub<VCVTF:mode>): Likewise.
	(neon_vfma<VH:mode>): Generate the main fma<mode>4 form instead
	of using fma<mode>4_intrinsic.

2020-10-02  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/97193
	* coverage.c (coverage_init): GCDA note files should not be
	mangled and should end in output directory.

2020-10-02  Jason Merril  <jason@redhat.com>

	* gimple.h (gimple_call_operator_delete_p): Rename from
	gimple_call_replaceable_operator_delete_p.
	* gimple.c (gimple_call_operator_delete_p): Likewise.
	* tree.h (DECL_IS_REPLACEABLE_OPERATOR_DELETE_P): Remove.
	* tree-ssa-dce.c (mark_all_reaching_defs_necessary_1): Adjust.
	(propagate_necessity): Likewise.
	(eliminate_unnecessary_stmts): Likewise.
	* tree-ssa-structalias.c (find_func_aliases_for_call): Likewise.

2020-10-02  Richard Biener  <rguenther@suse.de>

	* gimple.h (GF_CALL_FROM_NEW_OR_DELETE): New call flag.
	(gimple_call_set_from_new_or_delete): New.
	(gimple_call_from_new_or_delete): Likewise.
	* gimple.c (gimple_build_call_from_tree): Set
	GF_CALL_FROM_NEW_OR_DELETE appropriately.
	* ipa-icf-gimple.c (func_checker::compare_gimple_call):
	Compare gimple_call_from_new_or_delete.
	* tree-ssa-dce.c (mark_all_reaching_defs_necessary_1): Make
	sure to only consider new/delete calls from new or delete
	expressions.
	(propagate_necessity): Likewise.
	(eliminate_unnecessary_stmts): Likewise.
	* tree-ssa-structalias.c (find_func_aliases_for_call):
	Likewise.

2020-10-02  Jason Merril  <jason@redhat.com>

	* tree.h (CALL_FROM_NEW_OR_DELETE_P): Move from cp-tree.h.
	* tree-core.h: Document new usage of protected_flag.

2020-10-02  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.h (irange::fits_p): New.

2020-10-01  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_legitimize_address): Use
	gen_int_mode for high part of address constant.

2020-10-01  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_linux64_override_options):
	Formatting.  Correct setting of TARGET_NO_FP_IN_TOC and
	TARGET_NO_SUM_IN_TOC.

2020-10-01  Alan Modra  <amodra@gmail.com>

	* config/rs6000/freebsd64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Use
	rs6000_linux64_override_options.
	* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Break
	out to..
	* config/rs6000/rs6000.c (rs6000_linux64_override_options): ..this,
	new function.  Tweak non-biarch test and clearing of
	profile_kernel to work with freebsd64.h.

2020-10-01  Martin Liska  <mliska@suse.cz>

	* config/rs6000/rs6000-call.c: Include value-range.h.
	* config/rs6000/rs6000.c: Likewise.

2020-10-01  Tom de Vries  <tdevries@suse.de>

	PR target/80845
	* config/nvptx/nvptx.md (define_insn "truncsi<QHIM>2"): Emit mov.u32
	instead of cvt.u32.u32.

2020-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/96528
	PR target/97288
	* config/arm/arm-protos.h (arm_expand_vector_compare): Declare.
	(arm_expand_vcond): Likewise.
	* config/arm/arm.c (arm_expand_vector_compare): New function.
	(arm_expand_vcond): Likewise.
	* config/arm/neon.md (vec_cmp<VDQW:mode><v_cmp_result>): New pattern.
	(vec_cmpu<VDQW:mode><VDQW:mode>): Likewise.
	(vcond<VDQW:mode><VDQW:mode>): Require operand 5 to be a register
	or zero.  Use arm_expand_vcond.
	(vcond<V_cvtto><V32:mode>): New pattern.
	(vcondu<VDQIW:mode><VDQIW:mode>): Generalize to...
	(vcondu<VDQW:mode><v_cmp_result): ...this.  Require operand 5
	to be a register or zero.  Use arm_expand_vcond.
	(vcond_mask_<VDQW:mode><v_cmp_result>): New pattern.
	(neon_vc<cmp_op><mode>, neon_vc<cmp_op><mode>_insn): Add "@" marker.
	(neon_vbsl<mode>): Likewise.
	(neon_vc<cmp_op>u<mode>): Reexpress as...
	(@neon_vc<code><mode>): ...this.

2020-10-01  Michael Davidsaver  <mdavidsaver@gmail.com>

	* config/i386/t-rtems: Change from mtune to march when building
	multilibs.  The mtune argument tunes or optimizes for a specific
	CPU model but does not ensure the generated code is appropriate
	for the CPU model. Prior to this patch, i386 compatible code
	was always generated but tuned for later models.

2020-10-01  Aldy Hernandez  <aldyh@redhat.com>

	* builtins.c (compute_objsize): Replace vr_values with range_query.
	(get_range): Same.
	(gimple_call_alloc_size): Same.
	* builtins.h (class vr_values):  Remove.
	(gimple_call_alloc_size): Replace vr_values with range_query.
	* gimple-ssa-sprintf.c (get_int_range): Same.
	(struct directive): Pass gimple context to fmtfunc callback.
	(directive::set_width): Replace inline with out-of-line version.
	(directive::set_precision): Same.
	(format_none): New gimple argument.
	(format_percent): New gimple argument.
	(format_integer): New gimple argument.
	(format_floating): New gimple argument.
	(get_string_length): Use range_query API.
	(format_character): New gimple argument.
	(format_string): New gimple argument.
	(format_plain): New gimple argument.
	(format_directive): New gimple argument.
	(parse_directive): Replace vr_values with range_query.
	(compute_format_length): Same.
	(handle_printf_call): Same.  Adjust for range_query API.
	* tree-ssa-strlen.c (get_range): Same.
	(compare_nonzero_chars): Same.
	(get_addr_stridx) Replace vr_values with range_query.
	(get_stridx): Same.
	(dump_strlen_info): Same.
	(get_range_strlen_dynamic): Adjust for range_query API.
	(set_strlen_range): Same
	(maybe_warn_overflow): Replace vr_values with range_query.
	(handle_builtin_strcpy): Same.
	(maybe_diag_stxncpy_trunc): Add FIXME comment.
	(handle_builtin_memcpy): Replace vr_values with range_query.
	(handle_builtin_memset): Same.
	(get_len_or_size): Same.
	(strxcmp_eqz_result): Same.
	(handle_builtin_string_cmp): Same.
	(count_nonzero_bytes_addr): Same, plus adjust for range_query API.
	(count_nonzero_bytes): Replace vr_values with range_query.
	(handle_store): Same.
	(strlen_check_and_optimize_call): Same.
	(handle_integral_assign): Same.
	(check_and_optimize_stmt): Same.
	* tree-ssa-strlen.h (class vr_values): Remove.
	(get_range): Replace vr_values with range_query.
	(get_range_strlen_dynamic): Same.
	(handle_printf_call): Same.

2020-10-01  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-loop-versioning.cc (lv_dom_walker::before_dom_children):
	Pass m_range_analyzer instead of get_vr_values.
	(loop_versioning::name_prop::get_value): Rename to...
	(loop_versioning::name_prop::value_of_expr): ...this.
	* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::evrp_range_analyzer):
	Adjust for evrp_range_analyzer
	inheriting from vr_values.
	(evrp_range_analyzer::try_find_new_range): Same.
	(evrp_range_analyzer::record_ranges_from_incoming_edge): Same.
	(evrp_range_analyzer::record_ranges_from_phis): Same.
	(evrp_range_analyzer::record_ranges_from_stmt): Same.
	(evrp_range_analyzer::push_value_range): Same.
	(evrp_range_analyzer::pop_value_range): Same.
	* gimple-ssa-evrp-analyze.h (class evrp_range_analyzer): Inherit from
	vr_values.  Adjust accordingly.
	* gimple-ssa-evrp.c: Adjust for evrp_range_analyzer inheriting from
	vr_values.
	(evrp_folder::value_of_evrp): Rename from get_value.
	* tree-ssa-ccp.c (class ccp_folder): Rename get_value to
	value_of_expr.
	(ccp_folder::get_value): Rename to...
	(ccp_folder::value_of_expr): ...this.
	* tree-ssa-copy.c (class copy_folder): Rename get_value to
	value_of_expr.
	(copy_folder::get_value): Rename to...
	(copy_folder::value_of_expr): ...this.
	* tree-ssa-dom.c (dom_opt_dom_walker::after_dom_children): Adjust
	for evrp_range_analyzer inheriting from vr_values.
	(dom_opt_dom_walker::optimize_stmt): Same.
	* tree-ssa-propagate.c (substitute_and_fold_engine::replace_uses_in):
	Call value_of_* instead of get_value.
	(substitute_and_fold_engine::replace_phi_args_in): Same.
	(substitute_and_fold_engine::propagate_into_phi_args): Same.
	(substitute_and_fold_dom_walker::before_dom_children): Same.
	* tree-ssa-propagate.h: Include value-query.h.
	(class substitute_and_fold_engine): Inherit from value_query.
	* tree-ssa-strlen.c (strlen_dom_walker::before_dom_children):
	Adjust for evrp_range_analyzer inheriting from vr_values.
	* tree-ssa-threadedge.c (record_temporary_equivalences_from_phis):
	Same.
	* tree-vrp.c (class vrp_folder): Same.
	(vrp_folder::get_value): Rename to value_of_expr.
	* vr-values.c (vr_values::get_lattice_entry): Adjust for
	vr_values inheriting from range_query.
	(vr_values::range_of_expr): New.
	(vr_values::value_of_expr): New.
	(vr_values::value_on_edge): New.
	(vr_values::value_of_stmt): New.
	(simplify_using_ranges::op_with_boolean_value_range_p): Call
	get_value_range through query.
	(check_for_binary_op_overflow): Rename store to query.
	(vr_values::vr_values): Remove vrp_value_range_pool.
	(vr_values::~vr_values): Same.
	(simplify_using_ranges::get_vr_for_comparison): Call get_value_range
	through query.
	(simplify_using_ranges::compare_names): Same.
	(simplify_using_ranges::vrp_evaluate_conditional): Same.
	(simplify_using_ranges::vrp_visit_cond_stmt): Same.
	(simplify_using_ranges::simplify_abs_using_ranges): Same.
	(simplify_using_ranges::simplify_cond_using_ranges_1): Same.
	(simplify_cond_using_ranges_2): Same.
	(simplify_using_ranges::simplify_switch_using_ranges): Same.
	(simplify_using_ranges::two_valued_val_range_p): Same.
	(simplify_using_ranges::simplify_using_ranges): Rename store to query.
	(simplify_using_ranges::simplify): Assert that we have a query.
	* vr-values.h (class range_query): Remove.
	(class simplify_using_ranges): Remove inheritance of range_query.
	(class vr_values): Add virtuals for range_of_expr, value_of_expr,
	value_on_edge, value_of_stmt, and get_value_range.
	Call range_query allocator instead of using vrp_value_range_pool.
	Remove vrp_value_range_pool.
	(simplify_using_ranges::get_value_range): Remove.

2020-10-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97236
	* tree-vect-stmts.c (get_group_load_store_type): Keep
	VMAT_ELEMENTWISE for single-element vectors.

2020-10-01  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (compute_parm_map): Be ready for callee_pi to be NULL.

2020-10-01  Jan Hubicka  <jh@suse.cz>

	PR ipa/97244
	* ipa-fnsummary.c (pass_free_fnsummary::execute): Free
	also indirect inlining datastructure.
	* ipa-modref.c (pass_ipa_modref::execute): Do not free them here.
	* ipa-prop.c (ipa_free_all_node_params): Do not crash when info does
	not exist.
	(ipa_unregister_cgraph_hooks): Likewise.

2020-10-01  Jan Hubicka  <jh@suse.cz>

	* internal-fn.c (DEF_INTERNAL_FN): Fix handling of fnspec

2020-10-01  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in: Add value-query.o.
	* value-query.cc: New file.
	* value-query.h: New file.

2020-10-01  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm-cpus.in: Fix ordering, move Neoverse N2 down.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.

2020-10-01  Jakub Jelinek  <jakub@redhat.com>

	* config/s390/s390.c (s390_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for the first assignments to
	fenv_var and old_fpc.  Formatting fixes.

2020-10-01  Richard Biener  <rguenther@suse.de>

	* tree-vect-patterns.c (vect_recog_bool_pattern): Also handle
	VIEW_CONVERT_EXPR.

2020-10-01  Florian Weimer  <fweimer@redhat.com>

	PR target/97250
	* config/i386/i386.h (PTA_NO_TUNE, PTA_X86_64_BASELINE)
	(PTA_X86_64_V2, PTA_X86_64_V3, PTA_X86_64_V4): New.
	* common/config/i386/i386-common.c (processor_alias_table):
	Add "x86-64-v2", "x86-64-v3", "x86-64-v4".
	* config/i386/i386-options.c (ix86_option_override_internal):
	Handle new PTA_NO_TUNE processor table entries.
	* doc/invoke.texi (x86 Options): Document new -march values.

2020-10-01  Alan Modra  <amodra@gmail.com>

	* config/rs6000/ppc-asm.h: Support __PCREL__ code.

2020-10-01  Alan Modra  <amodra@gmail.com>

	* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Don't
	set -mcmodel=small for -mno-minimal-toc when pcrel.

2020-09-30  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97189
	* attribs.c (attr_access::array_as_string): Avoid assuming a VLA
	access specification string contains a closing bracket.

2020-09-30  Martin Sebor  <msebor@redhat.com>

	PR c/97206
	* attribs.c (attr_access::array_as_string): Avoid modifying a shared
	type in place and use build_type_attribute_qual_variant instead.

2020-09-30  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/arm/arm-cpus.in: Add Cortex-A78 and Cortex-A78AE cores.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.
	* doc/invoke.texi: Update docs.

2020-09-30  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-cores.def: Add Cortex-A78 and Cortex-A78AE cores.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Add -mtune=cortex-a78 and -mtune=cortex-a78ae.

2020-09-30  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/96795
	* config/arm/arm_mve.h (__ARM_mve_coerce2): Define.
	(__arm_vaddq): Correct the scalar argument.
	(__arm_vaddq_m): Likewise.
	(__arm_vaddq_x): Likewise.
	(__arm_vcmpeqq_m): Likewise.
	(__arm_vcmpeqq): Likewise.
	(__arm_vcmpgeq_m): Likewise.
	(__arm_vcmpgeq): Likewise.
	(__arm_vcmpgtq_m): Likewise.
	(__arm_vcmpgtq): Likewise.
	(__arm_vcmpleq_m): Likewise.
	(__arm_vcmpleq): Likewise.
	(__arm_vcmpltq_m): Likewise.
	(__arm_vcmpltq): Likewise.
	(__arm_vcmpneq_m): Likewise.
	(__arm_vcmpneq): Likewise.
	(__arm_vfmaq_m): Likewise.
	(__arm_vfmaq): Likewise.
	(__arm_vfmasq_m): Likewise.
	(__arm_vfmasq): Likewise.
	(__arm_vmaxnmavq): Likewise.
	(__arm_vmaxnmavq_p): Likewise.
	(__arm_vmaxnmvq): Likewise.
	(__arm_vmaxnmvq_p): Likewise.
	(__arm_vminnmavq): Likewise.
	(__arm_vminnmavq_p): Likewise.
	(__arm_vminnmvq): Likewise.
	(__arm_vminnmvq_p): Likewise.
	(__arm_vmulq_m): Likewise.
	(__arm_vmulq): Likewise.
	(__arm_vmulq_x): Likewise.
	(__arm_vsetq_lane): Likewise.
	(__arm_vsubq_m): Likewise.
	(__arm_vsubq): Likewise.
	(__arm_vsubq_x): Likewise.

2020-09-30  Joel Hutton  <joel.hutton@arm.com>

	PR target/96837
	* tree-vect-slp.c (vect_analyze_slp): Do not call
	vect_attempt_slp_rearrange_stmts for vector constructors.

2020-09-30  Tamar Christina  <tamar.christina@arm.com>

	* tree-vectorizer.h (SLP_TREE_REF_COUNT): New.
	* tree-vect-slp.c (_slp_tree::_slp_tree, _slp_tree::~_slp_tree,
	vect_free_slp_tree, vect_build_slp_tree, vect_print_slp_tree,
	slp_copy_subtree, vect_attempt_slp_rearrange_stmts): Use it.

2020-09-30  Tobias Burnus  <tobias@codesourcery.com>

	* omp-offload.c (omp_discover_implicit_declare_target): Also
	handled nested functions.

2020-09-30  Tobias Burnus  <tobias@codesourcery.com>
	    Tom de Vries  <tdevries@suse.de>

	* builtins.c (expand_builtin_cexpi, fold_builtin_sincos): Update
	targetm.libc_has_function call.
	* builtins.def (DEF_C94_BUILTIN, DEF_C99_BUILTIN, DEF_C11_BUILTIN):
	(DEF_C2X_BUILTIN, DEF_C99_COMPL_BUILTIN, DEF_C99_C90RES_BUILTIN):
	Same.
	* config/darwin-protos.h (darwin_libc_has_function): Update prototype.
	* config/darwin.c (darwin_libc_has_function): Add arg.
	* config/linux-protos.h (linux_libc_has_function): Update prototype.
	* config/linux.c (linux_libc_has_function): Add arg.
	* config/i386/i386.c (ix86_libc_has_function): Update
	targetm.libc_has_function call.
	* config/nvptx/nvptx.c (nvptx_libc_has_function): New function.
	(TARGET_LIBC_HAS_FUNCTION): Redefine to nvptx_libc_has_function.
	* convert.c (convert_to_integer_1): Update targetm.libc_has_function
	call.
	* match.pd: Same.
	* target.def (libc_has_function): Add arg.
	* doc/tm.texi: Regenerate.
	* targhooks.c (default_libc_has_function, gnu_libc_has_function)
	(no_c99_libc_has_function): Add arg.
	* targhooks.h (default_libc_has_function, no_c99_libc_has_function)
	(gnu_libc_has_function): Update prototype.
	* tree-ssa-math-opts.c (pass_cse_sincos::execute): Update
	targetm.libc_has_function call.

2020-09-30  H.J. Lu  <hjl.tools@gmail.com>

	PR target/97184
	* config/i386/i386.md (UNSPECV_MOVDIRI): Renamed to ...
	(UNSPEC_MOVDIRI): This.
	(UNSPECV_MOVDIR64B): Renamed to ...
	(UNSPEC_MOVDIR64B): This.
	(movdiri<mode>): Use SET operation.
	(@movdir64b_<mode>): Likewise.

2020-09-30  Florian Weimer  <fweimer@redhat.com>

	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__LAHF_SAHF__ and __MOVBE__ based on ISA flags.

2020-09-30  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/97150
	* config/aarch64/arm_neon.h (vqrshlb_u8): Make second argument
	signed.
	(vqrshlh_u16): Likewise.
	(vqrshls_u32): Likewise.
	(vqrshld_u64): Likewise.
	(vqshlb_u8): Likewise.
	(vqshlh_u16): Likewise.
	(vqshls_u32): Likewise.
	(vqshld_u64): Likewise.
	(vshld_u64): Likewise.

2020-09-30  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/96313
	* config/aarch64/aarch64-simd-builtins.def (sqmovun): Use UNOPUS
	qualifiers.
	* config/aarch64/arm_neon.h (vqmovun_s16): Adjust builtin call.
	Remove unnecessary result cast.
	(vqmovun_s32): Likewise.
	(vqmovun_s64): Likewise.
	(vqmovunh_s16): Likewise.  Fix return type.
	(vqmovuns_s32): Likewise.
	(vqmovund_s64): Likewise.

2020-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_split_128bit_move_p): Add a
	function comment.  Tighten check for FP moves.
	* config/aarch64/aarch64.md (*movti_aarch64): Add a w<-Z alternative.
	(*movtf_aarch64): Handle r<-Y like r<-r.  Remove unnecessary
	earlyclobber.  Change splitter predicate from aarch64_reg_or_imm
	to nonmemory_operand.

2020-09-30  Alex Coplan  <alex.coplan@arm.com>

	PR target/97251
	* config/arm/arm.md (movsf): Relax TARGET_HARD_FLOAT to
	TARGET_VFP_BASE.
	(movdf): Likewise.
	* config/arm/vfp.md (no_literal_pool_df_immediate): Likewise.
	(no_literal_pool_sf_immediate): Likewise.

2020-09-30  Alan Modra  <amodra@gmail.com>

	* configure.ac (--with-long-double-format): Typo fix.
	* configure: Regenerate.

2020-09-30  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.md (@tablejump<mode>_normal): Don't use
	non-existent operands[].
	(@tablejump<mode>_nospec): Likewise.

2020-09-30  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (tablejump): Simplify.
	(tablejumpsi): Merge this ...
	(tablejumpdi): ... and this ...
	(@tablejump<mode>_normal): ... into this.
	(tablejumpsi_nospec): Merge this ...
	(tablejumpdi_nospec): ... and this ...
	(@tablejump<mode>_nospec): ... into this.
	(*tablejump<mode>_internal1): Delete, rename to ...
	(@tablejump<mode>_insn_normal): ... this.
	(*tablejump<mode>_internal1_nospec): Delete, rename to ...
	(@tablejump<mode>_insn_nospec): ... this.

2020-09-29  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97188
	* calls.c (maybe_warn_rdwr_sizes): Simplify warning messages.
	Correct handling of VLA argumments.

2020-09-29  Marek Polacek  <polacek@redhat.com>

	PR c++/94695
	* doc/invoke.texi: Document -Wrange-loop-construct.

2020-09-29  Jim Wilson  <jimw@sifive.com>

	PR bootstrap/97183
	* configure.ac (gcc_cv_header_zstd_h): Check ZSTD_VERISON_NUMBER.
	* configure: Regenerated.

2020-09-29  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/arm/arm-cpus.in: Add Cortex-X1 core.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.
	* doc/invoke.texi: Update docs.

2020-09-29  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-cores.def: Add Cortex-X1 Arm core.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Add -mtune=cortex-x1 docs.

2020-09-29  H.J. Lu  <hjl.tools@gmail.com>

	PR target/97247
	* config/i386/enqcmdintrin.h: Replace <enqcmdntrin.h> with
	<enqcmdintrin.h>.  Replace _ENQCMDNTRIN_H_INCLUDED with
	_ENQCMDINTRIN_H_INCLUDED.

2020-09-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97241
	* tree-vect-loop.c (vectorizable_reduction): Move finding
	the SLP node for the reduction stmt to a better place.

2020-09-29  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp): Move SLP reduction
	re-arrangement and SLP graph load gathering...
	(vect_optimize_slp): ... here.
	* tree-vectorizer.h (vec_info::slp_loads): Remove.

2020-09-29  Hongyu Wang  <hongyu.wang@intel.com>

	PR target/97231
	* config/i386/amxbf16intrin.h: Add FSF copyright notes.
	* config/i386/amxint8intrin.h: Ditto.
	* config/i386/amxtileintrin.h: Ditto.
	* config/i386/avx512vp2intersectintrin.h: Ditto.
	* config/i386/avx512vp2intersectvlintrin.h: Ditto.
	* config/i386/pconfigintrin.h: Ditto.
	* config/i386/tsxldtrkintrin.h: Ditto.
	* config/i386/wbnoinvdintrin.h: Ditto.

2020-09-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97238
	* tree-ssa-reassoc.c (ovce_extract_ops): Fix typo.

2020-09-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm.h (ARM_HAVE_NEON_V8QI_ARITH, ARM_HAVE_NEON_V4HI_ARITH)
	(ARM_HAVE_NEON_V2SI_ARITH, ARM_HAVE_NEON_V16QI_ARITH): New macros.
	(ARM_HAVE_NEON_V8HI_ARITH, ARM_HAVE_NEON_V4SI_ARITH): Likewise.
	(ARM_HAVE_NEON_V2DI_ARITH, ARM_HAVE_NEON_V4HF_ARITH): Likewise.
	(ARM_HAVE_NEON_V8HF_ARITH, ARM_HAVE_NEON_V2SF_ARITH): Likewise.
	(ARM_HAVE_NEON_V4SF_ARITH, ARM_HAVE_V8QI_ARITH, ARM_HAVE_V4HI_ARITH)
	(ARM_HAVE_V2SI_ARITH, ARM_HAVE_V16QI_ARITH, ARM_HAVE_V8HI_ARITH)
	(ARM_HAVE_V4SI_ARITH, ARM_HAVE_V2DI_ARITH, ARM_HAVE_V4HF_ARITH)
	(ARM_HAVE_V2SF_ARITH, ARM_HAVE_V8HF_ARITH, ARM_HAVE_V4SF_ARITH):
	Likewise.
	* config/arm/iterators.md (VNIM, VNINOTM): Delete.
	* config/arm/vec-common.md (add<VNIM:mode>3, addv8hf3)
	(add<VNINOTM:mode>3): Replace with...
	(add<VDQ:mode>3): ...this new expander.
	* config/arm/neon.md (*add<VDQ:mode>3_neon): Use the new
	ARM_HAVE_NEON_<MODE>_ARITH macros as the C condition.
	(addv8hf3_neon, addv4hf3, add<VFH:mode>3_fp16): Delete in
	favor of the above.
	(neon_vadd<VH:mode>): Use gen_add<mode>3 instead of
	gen_add<mode>3_fp16.

2020-09-29  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-c.c (riscv_cpu_cpp_builtins): Define
	__riscv_cmodel_medany when PIC mode.

2020-09-29  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64-cores.def: Move neoverse-n2 after saphira.
	* config/aarch64/aarch64-tune.md: Regenerate.

2020-09-29  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96979
	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Make a fast bail out.
	(bit_test_cluster::can_be_handled): Likewise here.
	* tree-switch-conversion.h (get_range): Use wi::to_wide instead
	of a folding.

2020-09-29  Martin Liska  <mliska@suse.cz>

	Revert:
	2020-09-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96979
	* doc/invoke.texi: Document new param max-switch-clustering-attempts.
	* params.opt: Add new parameter.
	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	Limit number of attempts.
	(bit_test_cluster::find_bit_tests): Likewise.

2020-09-28  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.h (class irange): Add irange_allocator friend.
	(class irange_allocator): New.

2020-09-28  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/96390
	* omp-offload.c (omp_discover_declare_target_tgt_fn_r): Handle
	alias nodes.

2020-09-28  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/smmintrin.h (_mm_insert_epi8): New.
	(_mm_insert_epi32): New.
	(_mm_insert_epi64): New.

2020-09-28  liuhongt  <hongtao.liu@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_AMX_TILE_SET,
	OPTION_MASK_ISA2_AMX_INT8_SET, OPTION_MASK_ISA2_AMX_BF16_SET,
	OPTION_MASK_ISA2_AMX_TILE_UNSET, OPTION_MASK_ISA2_AMX_INT8_UNSET,
	OPTION_MASK_ISA2_AMX_BF16_UNSET, OPTION_MASK_ISA2_XSAVE_UNSET):
	New marcos.
	(ix86_handle_option): Hanlde -mamx-tile, -mamx-int8, -mamx-bf16.
	* common/config/i386/i386-cpuinfo.h (processor_types): Add
	FEATURE_AMX_TILE, FEATURE_AMX_INT8, FEATURE_AMX_BF16.
	* common/config/i386/cpuinfo.h (XSTATE_TILECFG,
	XSTATE_TILEDATA, XCR_AMX_ENABLED_MASK): New macro.
	(get_available_features): Enable AMX features only if
	their states are suoorited by OSXSAVE.
	* common/config/i386/i386-isas.h: Add ISA_NAME_TABLE_ENTRY
	for amx-tile, amx-int8, amx-bf16.
	* config.gcc: Add amxtileintrin.h, amxint8intrin.h,
	amxbf16intrin.h to extra headers.
	* config/i386/amxbf16intrin.h: New file.
	* config/i386/amxint8intrin.h: Ditto.
	* config/i386/amxtileintrin.h: Ditto.
	* config/i386/cpuid.h (bit_AMX_BF16, bit_AMX_TILE, bit_AMX_INT8):
	New macro.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AMX_TILE__, __AMX_INT8__, AMX_BF16__.
	* config/i386/i386-options.c (ix86_target_string): Add
	-mamx-tile, -mamx-int8, -mamx-bf16.
	(ix86_option_override_internal): Handle AMX-TILE,
	AMX-INT8, AMX-BF16.
	* config/i386/i386.h (TARGET_AMX_TILE, TARGET_AMX_TILE_P,
	TARGET_AMX_INT8, TARGET_AMX_INT8_P, TARGET_AMX_BF16_P,
	PTA_AMX_TILE, PTA_AMX_INT8, PTA_AMX_BF16): New macros.
	* config/i386/i386.opt: Add -mamx-tile, -mamx-int8, -mamx-bf16.
	* config/i386/immintrin.h: Include amxtileintrin.h,
	amxint8intrin.h, amxbf16intrin.h.
	* doc/invoke.texi: Document -mamx-tile, -mamx-int8, -mamx-bf16.
	* doc/extend.texi: Document amx-tile, amx-int8, amx-bf16.
	* doc/sourcebuild.texi ((Effective-Target Keywords, Other
	hardware attributes): Document amx_int8, amx_tile, amx_bf16.

2020-09-28  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_general_expand_builtin): Do not alter value on a
	force_reg returned rtx.

2020-09-28  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-eh.c (lower_try_finally_dup_block): Revert latest change.

2020-09-27  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (modref_summary::useful_p): Fix testing of stores.

2020-09-27  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/97073
	* optabs.c (expand_binop, expand_absneg_bit, expand_unop,
	expand_copysign_bit): Check reg_overlap_mentioned_p between target
	and operand(s) and if it returns true, force a pseudo as target.

2020-09-27  Xionghu Luo  <luoxhu@linux.ibm.com>

	* gimple-isel.cc (gimple_expand_vec_set_expr): New function.
	(gimple_expand_vec_cond_exprs): Rename to ...
	(gimple_expand_vec_exprs): ... this and call
	gimple_expand_vec_set_expr.
	* internal-fn.c (vec_set_direct): New define.
	(expand_vec_set_optab_fn): New function.
	(direct_vec_set_optab_supported_p): New define.
	* internal-fn.def (VEC_SET): New DEF_INTERNAL_OPTAB_FN.
	* optabs.c (can_vec_set_var_idx_p): New function.
	* optabs.h (can_vec_set_var_idx_p): New declaration.

2020-09-26  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (analyze_stmt): Do not skip clobbers in early pass.
	* ipa-pure-const.c (analyze_stmt): Update comment.

2020-09-26  David Edelsohn  <dje.gcc@gmail.com>
	    Clement Chigot  <clement.chigot@atos.com>

	* collect2.c (visibility_flag): New.
	(main): Detect -fvisibility.
	(write_c_file_stat): Push and pop default visibility.

2020-09-26  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-transform.c: Include ipa-modref-tree.h and ipa-modref.h.
	(inline_call): Call ipa_merge_modref_summary_after_inlining.
	* ipa-inline.c (ipa_inline): Do not free summaries.
	* ipa-modref.c (dump_records): Fix formating.
	(merge_call_side_effects): Break out from ...
	(analyze_call): ... here; record recursive calls.
	(analyze_stmt): Add new parameter RECURSIVE_CALLS.
	(analyze_function): Do iterative dataflow on recursive calls.
	(compute_parm_map): New function.
	(ipa_merge_modref_summary_after_inlining): New function.
	(collapse_loads): New function.
	(modref_propagate_in_scc): Break out from ...
	(pass_ipa_modref::execute): ... here; Do iterative dataflow.
	* ipa-modref.h (ipa_merge_modref_summary_after_inlining): Declare.

2020-09-26  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_simd): Help vectorizer for the collapse == 1
	and non-composite collapse > 1 case with non-constant innermost loop
	step by precomputing number of iterations before loop and using an
	alternate IV from 0 to number of iterations - 1 with step of 1.

2020-09-26  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (dump_ipa_call_summary): Dump
	points_to_local_or_readonly_memory flag.
	(analyze_function_body): Compute points_to_local_or_readonly_memory
	flag.
	(remap_edge_change_prob): Rename to ...
	(remap_edge_params): ... this one; update
	points_to_local_or_readonly_memory.
	(remap_edge_summaries): Update.
	(read_ipa_call_summary): Stream the new flag.
	(write_ipa_call_summary): Likewise.
	* ipa-predicate.h (struct inline_param_summary): Add
	points_to_local_or_readonly_memory.
	(inline_param_summary::equal_to): Update.
	(inline_param_summary::useless_p): Update.

2020-09-26  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref-tree.h (modref_ref_node::insert_access): Track if something
	changed.
	(modref_base_node::insert_ref): Likewise (and add a new optional
	argument)
	(modref_tree::insert): Likewise.
	(modref_tree::merge): Rewrite

2020-09-25  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi: Add -fno-ipa-modref to flags disabled by
	-flive-patching.
	* opts.c (control_options_for_live_patching): Disable ipa-modref.

2020-09-25  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref.c (analyze_stmt): Fix return value for gimple_clobber.

2020-09-25  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-option-extensions.def (rng): Add
	cpuinfo string.

2020-09-25  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm-cpus.in (neoverse-v1): Add FP16.

2020-09-25  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/64636
	* value-prof.c (stream_out_histogram_value): Allow negative
	values for HIST_TYPE_IOR.

2020-09-25  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_assemble_integer, nvptx_print_operand):
	Use gcc_fallthrough ().

2020-09-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/96814
	* expr.c (store_constructor): Handle VECTOR_BOOLEAN_TYPE_P
	CTORs correctly.

2020-09-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/97207
	* vec.h (auto_vec<T>::operator=(auto_vec<T>&&)): Implement.

2020-09-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm-protos.h (arm_mve_mode_and_operands_type_check):
	Delete.
	* config/arm/arm.c (arm_coproc_mem_operand_wb): Use a scale factor
	of 2 rather than 4 for 16-bit modes.
	(arm_mve_mode_and_operands_type_check): Delete.
	* config/arm/constraints.md (Uj): Allow writeback for Neon,
	but continue to disallow it for MVE.
	* config/arm/arm.md (*arm32_mov<HFBF:mode>): Add !TARGET_HAVE_MVE.
	* config/arm/vfp.md (*mov_load_vfp_hf16, *mov_store_vfp_hf16): Fold
	back into...
	(*mov<mode>_vfp_<mode>16): ...here but use Uj for the FPR memory
	constraints.  Use for base MVE too.

2020-09-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97199
	* tree-if-conv.c (combine_blocks): Remove edges only
	after looking at virtual PHI args.

2020-09-25  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (scan_omp_1_stmt): Don't call scan_omp_simd for
	collapse > 1 loops as simt doesn't support collapsed loops yet.
	* omp-expand.c (expand_omp_for_init_counts, expand_omp_for_init_vars):
	Small tweaks to function comment.
	(expand_omp_simd): Rewritten collapse > 1 support to only attempt
	to vectorize the innermost loop and emit set of outer loops around it.
	For non-composite simd with collapse > 1 without broken loop don't
	even try to compute number of iterations first.  Add support for
	non-rectangular simd loops.
	(expand_omp_for): Don't sorry_at on non-rectangular simd loops.

2020-09-25  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_edge::debug): New.
	* cgraph.h (cgraph_edge::debug): New.

2020-09-25  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Always print space at the end
	of a message.  Remove one extra space.

2020-09-24  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm-cpus.in (neoverse-n2): New.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.
	* doc/invoke.texi: Document support for Neoverse N2.

2020-09-24  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64-cores.def: Add Neoverse N2.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Document AArch64 support for Neoverse N2.

2020-09-24  Richard Biener  <rguenther@suse.de>

	* vec.h (auto_vec<T, 0>::auto_vec (auto_vec &&)): New move CTOR.
	(auto_vec<T, 0>::operator=(auto_vec &&)): Delete.
	* hash-table.h (hash_table::expand): Use std::move when expanding.
	* cfgloop.h (get_loop_exit_edges): Return auto_vec<edge>.
	* cfgloop.c (get_loop_exit_edges): Adjust.
	* cfgloopmanip.c (fix_loop_placement): Likewise.
	* ipa-fnsummary.c (analyze_function_body): Likewise.
	* ira-build.c (create_loop_tree_nodes): Likewise.
	(create_loop_tree_node_allocnos): Likewise.
	(loop_with_complex_edge_p): Likewise.
	* ira-color.c (ira_loop_edge_freq): Likewise.
	* loop-unroll.c (analyze_insns_in_loop): Likewise.
	* predict.c (predict_loops): Likewise.
	* tree-predcom.c (last_always_executed_block): Likewise.
	* tree-ssa-loop-ch.c (ch_base::copy_headers): Likewise.
	* tree-ssa-loop-im.c (store_motion_loop): Likewise.
	* tree-ssa-loop-ivcanon.c (loop_edge_to_cancel): Likewise.
	(canonicalize_loop_induction_variables): Likewise.
	* tree-ssa-loop-manip.c (get_loops_exits): Likewise.
	* tree-ssa-loop-niter.c (find_loop_niter): Likewise.
	(finite_loop_p): Likewise.
	(find_loop_niter_by_eval): Likewise.
	(estimate_numbers_of_iterations): Likewise.
	* tree-ssa-loop-prefetch.c (emit_mfence_after_loop): Likewise.
	(may_use_storent_in_loop_p): Likewise.

2020-09-24  Jan Hubicka  <jh@suse.cz>

	* doc/invoke.texi: Document -fipa-modref, ipa-modref-max-bases,
	ipa-modref-max-refs, ipa-modref-max-accesses, ipa-modref-max-tests.
	* ipa-modref-tree.c (test_insert_search_collapse): Update.
	(test_merge): Update.
	(gt_ggc_mx): New function.
	* ipa-modref-tree.h (struct modref_access_node): New structure.
	(struct modref_ref_node): Add every_access and accesses array.
	(modref_ref_node::modref_ref_node): Update ctor.
	(modref_ref_node::search): New member function.
	(modref_ref_node::collapse): New member function.
	(modref_ref_node::insert_access): New member function.
	(modref_base_node::insert_ref): Do not collapse base if ref is 0.
	(modref_base_node::collapse): Copllapse also refs.
	(modref_tree): Add accesses.
	(modref_tree::modref_tree): Initialize max_accesses.
	(modref_tree::insert): Add access parameter.
	(modref_tree::cleanup): New member function.
	(modref_tree::merge): Add parm_map; merge accesses.
	(modref_tree::copy_from): New member function.
	(modref_tree::create_ggc): Add max_accesses.
	* ipa-modref.c (dump_access): New function.
	(dump_records): Dump accesses.
	(dump_lto_records): Dump accesses.
	(get_access): New function.
	(record_access): Record access.
	(record_access_lto): Record access.
	(analyze_call): Compute parm_map.
	(analyze_function): Update construction of modref records.
	(modref_summaries::duplicate): Likewise; use copy_from.
	(write_modref_records): Stream accesses.
	(read_modref_records): Sream accesses.
	(pass_ipa_modref::execute): Update call of merge.
	* params.opt (-param=modref-max-accesses): New.
	* tree-ssa-alias.c (alias_stats): Add modref_baseptr_tests.
	(dump_alias_stats): Update.
	(base_may_alias_with_dereference_p): New function.
	(modref_may_conflict): Check accesses.
	(ref_maybe_used_by_call_p_1): Update call to modref_may_conflict.
	(call_may_clobber_ref_p_1): Update call to modref_may_conflict.

2020-09-24  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm.md (*stack_protect_combined_set_insn): For non-PIC,
	load the address of the canary rather than the address of the
	constant pool entry that points to it.
	(*stack_protect_combined_test_insn): Likewise.

2020-09-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97085
	* match.pd (mask ? { false,..} : { true, ..} -> ~mask): New.

2020-09-24  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref-tree.h (modref_base::collapse): Release memory.
	(modref_tree::create_ggc): New member function.
	(modref_tree::colapse): Release memory.
	(modref_tree::~modref_tree): New destructor.
	* ipa-modref.c (modref_summaries::create_ggc): New function.
	(analyze_function): Use create_ggc.
	(modref_summaries::duplicate): Likewise.
	(read_modref_records): Likewise.
	(modref_read): Likewise.

2020-09-24  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_rtx_costs): Pass mode to
	reg_or_add_cint_operand and reg_or_sub_cint_operand.

2020-09-24  Alan Modra  <amodra@gmail.com>

	PR target/93012
	* config/rs6000/rs6000.c (num_insns_constant_gpr): Count rldimi
	constants correctly.

2020-09-24  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
	Conditionally define __PCREL__.

2020-09-24  Alan Modra  <amodra@gmail.com>

	PR target/97107
	* config/rs6000/rs6000-internal.h (struct rs6000_stack): Improve
	calls_p comment.
	* config/rs6000/rs6000-logue.c (rs6000_stack_info): Likewise.
	(rs6000_expand_split_stack_prologue): Emit the prologue for
	functions that make a sibling call.

2020-09-24  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Analyzer Paths): Add note about
	-fno-analyzer-feasibility.
	* doc/invoke.texi (Static Analyzer Options): Add
	-fno-analyzer-feasibility.

2020-09-24  Paul A. Clarke  <pc@us.ibm.com>

	* doc/extend.texi: Add 'd' for doubleword variant of
	vector insert instruction.

2020-09-23  Martin Sebor  <msebor@redhat.com>

	* gimple-array-bounds.cc (build_zero_elt_array_type): New function.
	(array_bounds_checker::check_mem_ref): Call it.

2020-09-23  Martin Sebor  <msebor@redhat.com>

	PR middle-end/97175
	* builtins.c (maybe_warn_for_bound): Handle both DECLs and EXPRESSIONs
	in pad->dst.ref, same is pad->src.ref.

2020-09-23  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (refs_local_or_readonly_memory_p): New function.
	(points_to_local_or_readonly_memory_p): New function.
	* ipa-fnsummary.h (refs_local_or_readonly_memory_p): Declare.
	(points_to_local_or_readonly_memory_p): Declare.
	* ipa-modref.c (record_access_p): Use refs_local_or_readonly_memory_p.
	* ipa-pure-const.c (check_op): Likewise.

2020-09-23  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.md: Don't allow operand containing sum of
	function ref and const.

2020-09-23  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_salt_type): New enum.
	(aarch64_stack_protect_canary_mem): Declare.
	* config/aarch64/aarch64.md (UNSPEC_SALT_ADDR): New unspec.
	(stack_protect_set): Forward to stack_protect_combined_set.
	(stack_protect_combined_set): New pattern.  Use
	aarch64_stack_protect_canary_mem.
	(reg_stack_protect_address_<mode>): Add a salt operand.
	(stack_protect_test): Forward to stack_protect_combined_test.
	(stack_protect_combined_test): New pattern.  Use
	aarch64_stack_protect_canary_mem.
	* config/aarch64/aarch64.c (strip_salt): New function.
	(strip_offset_and_salt): Likewise.
	(tls_symbolic_operand_type): Use strip_offset_and_salt.
	(aarch64_stack_protect_canary_mem): New function.
	(aarch64_cannot_force_const_mem): Use strip_offset_and_salt.
	(aarch64_classify_address): Likewise.
	(aarch64_symbolic_address_p): Likewise.
	(aarch64_print_operand): Likewise.
	(aarch64_output_addr_const_extra): New function.
	(aarch64_tls_symbol_p): Use strip_salt.
	(aarch64_classify_symbol): Likewise.
	(aarch64_legitimate_pic_operand_p): Use strip_offset_and_salt.
	(aarch64_legitimate_constant_p): Likewise.
	(aarch64_mov_operand_p): Use strip_salt.
	(TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA): Override.

2020-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vreinterpretq_f64_p128,
	vreinterpretq_p128_f64): Define.

2020-09-23  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm-cpus.in (neoverse-v1): New.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Regenerate.
	* doc/invoke.texi: Document support for Neoverse V1.

2020-09-23  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64-cores.def: Add Neoverse V1.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Document support for Neoverse V1.

2020-09-23  Richard Biener  <rguenther@suse.de>

	PR middle-end/96453
	* gimple-isel.cc (gimple_expand_vec_cond_expr): Remove
	LT_EXPR -> NE_EXPR verification and also apply it for
	non-constant masks.

2020-09-23  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref.c (modref_summary::lto_useful_p): New member function.
	(modref_summary::useful_p): New member function.
	(analyze_function): Drop useless summaries.
	(modref_write): Skip useless summaries.
	(pass_ipa_modref::execute): Drop useless summaries.
	* ipa-modref.h (struct GTY): Declare useful_p and lto_useful_p.
	* tree-ssa-alias.c (dump_alias_stats): Fix.
	(modref_may_conflict): Fix stats.

2020-09-23  Richard Biener  <rguenther@suse.de>

	PR middle-end/96466
	* internal-fn.c (expand_vect_cond_mask_optab_fn): Use
	appropriate mode for force_reg.
	* tree.c (build_truth_vector_type_for): Pass VOIDmode to
	make_vector_type.

2020-09-23  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (determine_peel_for_niter): Delete in favor of...
	(vect_determine_partial_vectors_and_peeling): ...this new function.
	* tree-vect-loop-manip.c (vect_update_epilogue_niters): New function.
	Reject using vector epilogue loops for single iterations.  Install
	the constant number of epilogue loop iterations in the associated
	loop_vinfo.  Rely on vect_determine_partial_vectors_and_peeling
	to do the main part of the test.
	(vect_do_peeling): Use vect_update_epilogue_niters to handle
	epilogue loops with a known number of iterations.  Skip recomputing
	the number of iterations later in that case.  Otherwise, use
	vect_determine_partial_vectors_and_peeling to decide whether the
	epilogue loop needs to use partial vectors or peeling.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Set the
	default can_use_partial_vectors_p to false if partial-vector-usage=0.
	(determine_peel_for_niter): Remove in favor of...
	(vect_determine_partial_vectors_and_peeling): ...this new function,
	split out from...
	(vect_analyze_loop_2): ...here.  Reflect the vect_verify_full_masking
	and vect_verify_loop_lens results in CAN_USE_PARTIAL_VECTORS_P
	rather than USING_PARTIAL_VECTORS_P.

2020-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/aarch64-simd-builtins.def (frintn): Use BUILTIN_VHSDF_HSDF
	for modes.  Remove explicit hf instantiation.
	* config/aarch64/arm_neon.h (vrndns_f32): Define.

2020-09-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97173
	* tree-vect-loop.c (vectorizable_live_operation): Extend
	assert to also conver element conversions.

2020-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vtrn1q_p64, vtrn2q_p64, vuzp1q_p64,
	vuzp2q_p64, vzip1q_p64, vzip2q_p64): Define.

2020-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vldrq_p128): Define.

2020-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vstrq_p128): Define.

2020-09-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97151
	* tree-ssa-structalias.c (find_func_aliases_for_call):
	DECL_IS_REPLACEABLE_OPERATOR_DELETE_P has no effect on
	arguments.

2020-09-23  Richard Biener  <rguenther@suse.de>

	PR middle-end/97162
	* alias.c (compare_base_decls): Use DECL_HARD_REGISTER
	and guard with VAR_P.

2020-09-23  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/97069
	* profile.c (branch_prob): Line number must be at least 1.

2020-09-23  Tom de Vries  <tdevries@suse.de>

	PR target/97158
	* config/nvptx/nvptx.c (nvptx_output_mov_insn): Handle move from
	DF subreg to DF reg.

2020-09-23  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in: Add $(ZLIBINC) to CFLAGS-analyzer/engine.o.

2020-09-22  Jan Hubicka  <jh@suse.cz>

	* ipa-modref.c (analyze_stmt): Ignore gimple clobber.

2020-09-22  Jan Hubicka  <jh@suse.cz>

	* ipa-modref-tree.c: Add namespace selftest.
	(modref_tree_c_tests): Rename to ...
	(ipa_modref_tree_c_tests): ... this.
	* ipa-modref.c (pass_modref): Remove destructor.
	(ipa_modref_c_finalize): New function.
	* ipa-modref.h (ipa_modref_c_finalize): Declare.
	* selftest-run-tests.c (selftest::run_tests): Call
	ipa_modref_c_finalize.
	* selftest.h (ipa_modref_tree_c_tests): Declare.
	* toplev.c: Include ipa-modref-tree.h and ipa-modref.h
	(toplev::finalize): Call ipa_modref_c_finalize.

2020-09-22  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Other Debugging Techniques): Mention
	-fdump-analyzer-json.
	* doc/invoke.texi (Static Analyzer Options): Add
	-fdump-analyzer-json.

2020-09-22  David Faust  <david.faust@oracle.com>

	* config/bpf/bpf.md: Add defines for signed div and mod operators.

2020-09-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96979
	* doc/invoke.texi: Document new param max-switch-clustering-attempts.
	* params.opt: Add new parameter.
	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	Limit number of attempts.
	(bit_test_cluster::find_bit_tests): Likewise.

2020-09-22  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config/s390/s390.md ("*cmp<mode>_ccs_0", "*cmp<mode>_ccz_0",
	"*cmp<mode>_ccs_0_fastmath"): Basically change "*cmp<mode>_ccs_0" into
	"*cmp<mode>_ccz_0" and for fast math add "*cmp<mode>_ccs_0_fastmath".

2020-09-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vcls_u8, vcls_u16, vcls_u32,
	vclsq_u8, vclsq_u16, vclsq_u32): Define.

2020-09-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vceqq_p64, vceqz_p64, vceqzq_p64): Define.

2020-09-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/71233
	* config/aarch64/arm_neon.h (vadd_p8, vadd_p16, vadd_p64, vaddq_p8,
	vaddq_p16, vaddq_p64, vaddq_p128): Define.

2020-09-22  Jakub Jelinek  <jakub@redhat.com>

	* params.opt (--param=modref-max-tests=): Fix typo in help text:
	perofmed -> performed.
	* common.opt: Fix typo: incrmeental -> incremental.
	* ipa-modref.c: Fix typos: recroding -> recording, becaue -> because,
	analsis -> analysis.
	(class modref_summaries): Fix typo: betweehn -> between.
	(analyze_call): Fix typo: calle -> callee.
	(read_modref_records): Fix typo: expcted -> expected.
	(pass_ipa_modref::execute): Fix typo: calle -> callee.

2020-09-22  Jakub Jelinek  <jakub@redhat.com>

	* common.opt (-fipa-modref): Add dot at the end of option help.
	* params.opt (--param=modref-max-tests=): Likewise.

2020-09-21  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi: Document -Wctad-maybe-unsupported.

2020-09-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97139
	* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Only mark the
	pattern root, track visited vectorized stmts.

2020-09-21  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac: Use mallinfo mallinfo2 as first operand of
	gcc_AC_CHECK_DECLS rather than [mallinfo, mallinfo2].
	* configure: Regenerated.
	* config.in: Regenerated.

2020-09-21  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_general_expand_builtin): Use expand machinery not to
	alter the value of an rtx returned by force_reg.

2020-09-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97135
	* tree-ssa-loop-im.c (sm_seq_push_down): Do not ignore
	self-dependences.

2020-09-21  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96915
	* tree-switch-conversion.c (switch_conversion::expand): Accept
	also integer constants.

2020-09-21  Martin Liska  <mliska@suse.cz>

	* print-tree.c (print_node): Remove extra space.

2020-09-21  Andrea Corallo  <andrea.corallo@arm.com>

	PR target/96968
	* config/aarch64/aarch64-builtins.c
	(aarch64_expand_fpsr_fpcr_setter): Fix comment nit.
	(aarch64_expand_fpsr_fpcr_getter): New function, expand these
	getters using expand_insn machinery.
	(aarch64_general_expand_builtin): Make use of.

2020-09-21  Martin Liska  <mliska@suse.cz>

	* ggc-common.c (ggc_rlimit_bound): Use ONE_? macro.
	(ggc_min_expand_heuristic): Likewise.
	(ggc_min_heapsize_heuristic): Likewise.
	* ggc-page.c (ggc_collect): Likewise.
	* system.h (ONE_G): Likewise.

2020-09-21  Martin Liska  <mliska@suse.cz>

	* ggc-common.c (ggc_prune_overhead_list): Use SIZE_AMOUNT.
	* ggc-page.c (release_pages): Likewise.
	(ggc_collect): Likewise.
	(ggc_trim): Likewise.
	(ggc_grow): Likewise.
	* timevar.c (timer::print): Likewise.

2020-09-21  Martin Liska  <mliska@suse.cz>

	* config.in: Regenerate.
	* configure: Likewise.
	* configure.ac: Detect for mallinfo2.
	* ggc-common.c (defined): Use it.
	* system.h: Handle also HAVE_MALLINFO2.

2020-09-20  John David Anglin  < danglin@gcc.gnu.org>

	* config/pa/pa-hpux11.h (LINK_GCC_C_SEQUENCE_SPEC): Delete.
	* config/pa/pa64-hpux.h (LINK_GCC_C_SEQUENCE_SPEC): Likewise.
	(ENDFILE_SPEC): Link with libgcc_stub.a and mill.a.
	* config/pa/pa32-linux.h (ENDFILE_SPEC): Link with libgcc.a.

2020-09-20  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-modref.c (dump_lto_records): Fix ICE.

2020-09-20  David Cepelik  <d@dcepelik.cz>
	    Jan Hubicka  <hubicka@ucw.cz>

	* Makefile.in: Add ipa-modref.c and ipa-modref-tree.c.
	* alias.c: (reference_alias_ptr_type_1): Export.
	* alias.h (reference_alias_ptr_type_1): Declare.
	* common.opt (fipa-modref): New.
	* gengtype.c (open_base_files): Add ipa-modref-tree.h and ipa-modref.h
	* ipa-modref-tree.c: New file.
	* ipa-modref-tree.h: New file.
	* ipa-modref.c: New file.
	* ipa-modref.h: New file.
	* lto-section-in.c (lto_section_name): Add ipa_modref.
	* lto-streamer.h (enum lto_section_type): Add LTO_section_ipa_modref.
	* opts.c (default_options_table): Enable ipa-modref at -O1+.
	* params.opt (-param=modref-max-bases, -param=modref-max-refs,
	-param=modref-max-tests): New params.
	* passes.def: Schedule pass_modref and pass_ipa_modref.
	* timevar.def (TV_IPA_MODREF): New timevar.
	(TV_TREE_MODREF): New timevar.
	* tree-pass.h (make_pass_modref): Declare.
	(make_pass_ipa_modref): Declare.
	* tree-ssa-alias.c (dump_alias_stats): Include ipa-modref-tree.h
	and ipa-modref.h
	(alias_stats): Add modref_use_may_alias, modref_use_no_alias,
	modref_clobber_may_alias, modref_clobber_no_alias, modref_tests.
	(dump_alias_stats): Dump new stats.
	(nonoverlapping_array_refs_p): Fix formating.
	(modref_may_conflict): New function.
	(ref_maybe_used_by_call_p_1): Use it.
	(call_may_clobber_ref_p_1): Use it.
	(call_may_clobber_ref_p): Update.
	(stmt_may_clobber_ref_p_1): Update.
	* tree-ssa-alias.h (call_may_clobber_ref_p_1): Update.

2020-09-19  Martin Sebor  <msebor@redhat.com>

	PR middle-end/82608
	PR middle-end/94195
	PR c/50584
	PR middle-end/84051
	* gimple-array-bounds.cc (get_base_decl): New function.
	(get_ref_size): New function.
	(trailing_array): New function.
	(array_bounds_checker::check_array_ref): Call them.  Handle arrays
	declared in function parameters.
	(array_bounds_checker::check_mem_ref):  Same.  Handle references to
	dynamically allocated arrays.

2020-09-19  Martin Sebor  <msebor@redhat.com>

	PR c/50584
	* builtins.c (warn_for_access): Add argument.  Distinguish between
	reads and writes.
	(check_access): Add argument.  Distinguish between reads and writes.
	(gimple_call_alloc_size): Set range even on failure.
	(gimple_parm_array_size): New function.
	(compute_objsize): Call it.
	(check_memop_access): Pass check_access an additional argument.
	(expand_builtin_memchr, expand_builtin_strcat): Same.
	(expand_builtin_strcpy, expand_builtin_stpcpy_1): Same.
	(expand_builtin_stpncpy, check_strncat_sizes): Same.
	(expand_builtin_strncat, expand_builtin_strncpy): Same.
	(expand_builtin_memcmp): Same.
	* builtins.h (compute_objsize): Declare a new overload.
	(gimple_parm_array_size): Declare.
	(check_access): Add argument.
	* calls.c (append_attrname): Simplify.
	(maybe_warn_rdwr_sizes): Handle internal attribute access.
	* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Avoid adding
	quotes.

2020-09-19  Martin Sebor  <msebor@redhat.com>

	* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Handle attribute
	access internal representation of arrays.

2020-09-19  Martin Sebor  <msebor@redhat.com>

	PR c/50584
	* attribs.c (decl_attributes): Also pass decl along with type
	attributes to handlers.
	(init_attr_rdwr_indices): Change second argument to attribute chain.
	Handle internal attribute representation in addition to external.
	(get_parm_access): New function.
	(attr_access::to_internal_string): Define new member function.
	(attr_access::to_external_string): Define new member function.
	(attr_access::vla_bounds): Define new member function.
	* attribs.h (struct attr_access): Declare new members.
	(attr_access::from_mode_char): Define new member function.
	(get_parm_access): Declare new function.
	* calls.c (initialize_argument_information): Pass function type
	attributes to init_attr_rdwr_indices.
	* doc/invoke.texi (-Warray-parameter, -Wvla-parameter): Document.
	* tree-pretty-print.c (dump_generic_node): Correct handling of
	qualifiers.
	* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Same.
	* tree.h (access_mode): Add new enumerator.

2020-09-19  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/generic.texi (Basic Statements): Document SWITCH_EXPR here,
	not SWITCH_STMT.
	(Statements for C and C++): Rename node to reflect what
	the introduction already says about sharing between C and C++
	front ends.  Copy-edit and correct documentation for structured
	loops and switch.

2020-09-19  liuhongt  <hongtao.liu@intel.com>

	PR target/96861
	* config/i386/x86-tune-costs.h (skylake_cost): increase rtx
	cost of sse_to_integer from 2 to 6.

2020-09-18  Sudi Das  <sudi.das@arm.com>
	    Omar Tahir  <omar.tahir@arm.com>

	* config/arm/thumb2.md (*thumb2_csneg): New.
	(*thumb2_negscc): Don't match if TARGET_COND_ARITH.
	* config/arm/arm.md (*if_neg_move): Don't match if TARGET_COND_ARITH.

2020-09-18  Sudi Das  <sudi.das@arm.com>
	    Omar Tahir  <omar.tahir@arm.com>

	* config/arm/thumb2.md (*thumb2_csinc): New.
	(*thumb2_cond_arith): Generate CINC where possible.

2020-09-18  Sudi Das  <sudi.das@arm.com>
	    Omar Tahir  <omar.tahir@arm.com>

	* config/arm/arm.h (TARGET_COND_ARITH): New macro.
	* config/arm/arm.c (arm_have_conditional_execution): Return false if
	TARGET_COND_ARITH before reload.
	* config/arm/predicates.md (arm_comparison_operation): Returns true if
	comparing CC_REGNUM with constant zero.
	* config/arm/thumb2.md (*thumb2_csinv): New.
	(*thumb2_movcond): Don't match if TARGET_COND_ARITH.

2020-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91957
	* ira.c (ira_setup_eliminable_regset): Skip the special elimination
	handling of the hard frame pointer if the hard frame pointer is fixed.

2020-09-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97081
	* tree-vect-patterns.c (vect_recog_rotate_pattern): Use the
	precision of the shifted operand to determine the mask.

2020-09-18  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_print_operand): Update comment.
	Cast to long when printing values formatted as long.
	Support 'd', 'e', 'f' and 'g' modifiers.
	Extract operand value with a single operation for all modifiers.
	* doc/extend.texi (msp430Operandmodifiers): New.

2020-09-18  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (increment_stack): Mark insns which increment
	the stack as frame_related.
	(msp430_expand_prologue): Add comments.
	(msp430_expand_epilogue): Mark insns which decrement
	the stack as frame_related.
	Add reg_note to stack pop insns describing position of register
	variables on the stack.

2020-09-18  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-tree.c (execute_omp_gcn): Delete.
	(make_pass_omp_gcn): Delete.
	* config/gcn/t-gcn-hsa (PASSES_EXTRA): Delete.
	* config/gcn/gcn-passes.def: Removed.

2020-09-18  Alex Coplan  <alex.coplan@arm.com>

	* cfgloop.h (nb_iter_bound): Reword comment describing is_exit.

2020-09-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97095
	* tree-vect-loop.c (vectorizable_live_operation): Get
	the SLP vector type from the correct object.

2020-09-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97089
	* tree-ssa-sccvn.c (visit_nary_op): Do not replace unsigned
	divisions.

2020-09-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97098
	* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Do not
	recurse to children when all stmts were already visited.

2020-09-17  Sergei Trofimovich  <siarheit@google.com>

	* profile.c (sort_hist_values): Clarify hist format:
	start with a value, not counter.

2020-09-17  Yeting Kuo  <fakepaper56@gmail.com>

	* config/riscv/riscv.h (CSW_MAX_OFFSET): Fix typo.

2020-09-17  Patrick Palka  <ppalka@redhat.com>

	PR c/80076
	* gensupport.c (alter_attrs_for_subst_insn) <case SET_ATTR>:
	Reduce indentation of misleadingly indented code fragment.
	* lra-constraints.c (multi_block_pseudo_p): Likewise.
	* sel-sched-ir.c (merge_fences): Likewise.

2020-09-17  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wuninitialized): Document -Wuninitialized for
	allocated objects.
	 (-Wmaybe-uninitialized): Same.

2020-09-17  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (visit_nary_op): Value-number multiplications
	and divisions to negates of available negated forms.

2020-09-17  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/97078
	* function.c (use_register_for_decl): Test cfun->tail_call_marked
	for a parameter here instead of...
	(assign_parm_setup_reg): ...here.

2020-09-17  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (multi_precision_range_tests): Normalize symbolics when copying to a
	multi-range.
	* value-range.cc (irange::copy_legacy_range): Add test.

2020-09-17  Jan Hubicka  <jh@suse.cz>

	* cgraph.c (cgraph_node::get_availability): Fix availability of
	functions in other partitions
	* varpool.c (varpool_node::get_availability): Likewise.

2020-09-17  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/csky.opt (msim): New.
	* doc/invoke.texi (C-SKY Options): Document -msim.
	* config/csky/csky-elf.h (LIB_SPEC): Add simulator runtime.

2020-09-17  Sergei Trofimovich  <siarheit@google.com>

	* doc/cppenv.texi: Use @code{} instead of @samp{@command{}}
	around 'date %s'.

2020-09-17  liuhongt  <hongtao.liu@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_AVX_UNSET): Remove OPTION_MASK_ISA_XSAVE_UNSET.
	(OPTION_MASK_ISA_XSAVE_UNSET): Add OPTION_MASK_ISA_AVX_UNSET.

2020-09-16  Alexandre Oliva  <oliva@adacore.com>

	* config/rs6000/rs6000.c (have_compare_and_set_mask): Use
	E_*mode in cases.

2020-09-16  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/predicates.md (current_file_function_operand):
	Remove argument from rs6000_pcrel_p call.
	* config/rs6000/rs6000-logue.c (rs6000_decl_ok_for_sibcall):
	Likewise.
	(rs6000_global_entry_point_prologue_needed_p): Likewise.
	(rs6000_output_function_prologue): Likewise.
	* config/rs6000/rs6000-protos.h (rs6000_function_pcrel_p): New
	prototype.
	(rs6000_pcrel_p): Remove argument.
	* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Remove
	argument from rs6000_pcrel_p call.
	(rs6000_call_template_1): Likewise.
	(rs6000_indirect_call_template_1): Likewise.
	(rs6000_longcall_ref): Likewise.
	(rs6000_call_aix): Likewise.
	(rs6000_sibcall_aix): Likewise.
	(rs6000_function_pcrel_p): Rename from rs6000_pcrel_p.
	(rs6000_pcrel_p): Rewrite.
	* config/rs6000/rs6000.md (*pltseq_plt_pcrel<mode>): Remove
	argument from rs6000_pcrel_p call.
	(*call_local<mode>): Likewise.
	(*call_value_local<mode>): Likewise.
	(*call_nonlocal_aix<mode>): Likewise.
	(*call_value_nonlocal_aix<mode>): Likewise.
	(*call_indirect_pcrel<mode>): Likewise.
	(*call_value_indirect_pcrel<mode>): Likewise.

2020-09-16  Marek Polacek  <polacek@redhat.com>

	PR preprocessor/96935
	* input.c (get_substring_ranges_for_loc): Return if start.column
	is less than 1.

2020-09-16  Martin Sebor  <msebor@redhat.com>

	PR middle-end/96295
	* tree-ssa-uninit.c (maybe_warn_operand): Work harder to avoid
	warning for objects of empty structs

2020-09-16  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-eh.c (lower_try_finally_dup_block): Backward propagate slocs
	to stack restore builtin calls.
	(cleanup_all_empty_eh): Do again a post-order traversal of the EH
	region tree.

2020-09-16  Andrea Corallo  <andrea.corallo@arm.com>

	* tree-vect-loop.c (vect_need_peeling_or_partial_vectors_p): New
	function.
	(vect_analyze_loop_2): Make use of it not to select partial
	vectors if no peel is required.
	(determine_peel_for_niter): Move out some logic into
	'vect_need_peeling_or_partial_vectors_p'.

2020-09-16  H.J. Lu  <hjl.tools@gmail.com>

	PR target/97032
	* cfgexpand.c (asm_clobber_reg_kind): Set sp_is_clobbered_by_asm
	to true if the stack pointer is clobbered by asm statement.
	* emit-rtl.h (rtl_data): Add sp_is_clobbered_by_asm.
	* config/i386/i386.c (ix86_get_drap_rtx): Set need_drap to true
	if the stack pointer is clobbered by asm statement.

2020-09-16  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/vector.md(*vec_tf_to_v1tf): Use "f" instead of "v"
	  for the source operand.

2020-09-16  Jojo R  <jiejie_rong@c-sky.com>

	* config.gcc (C-SKY): Set use_gcc_stdint=wrap for elf target.

2020-09-16  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::num_slp_uses): Remove.
	(STMT_VINFO_NUM_SLP_USES): Likewise.
	(vect_free_slp_instance): Adjust.
	(vect_update_shared_vectype): Declare.
	* tree-vectorizer.c (vec_info::~vec_info): Adjust.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	(vectorizable_live_operation): Use vector type from
	SLP_TREE_REPRESENTATIVE.
	(vect_transform_loop): Adjust.
	* tree-vect-data-refs.c (vect_slp_analyze_node_alignment):
	Set the shared vector type.
	* tree-vect-slp.c (vect_free_slp_tree): Remove final_p
	parameter, remove STMT_VINFO_NUM_SLP_USES updating.
	(vect_free_slp_instance): Adjust.
	(vect_create_new_slp_node): Remove STMT_VINFO_NUM_SLP_USES
	updating.
	(vect_update_shared_vectype): Always compare with the
	present vector type, update if NULL.
	(vect_build_slp_tree_1): Do not update the shared vector
	type here.
	(vect_build_slp_tree_2): Adjust.
	(slp_copy_subtree): Likewise.
	(vect_attempt_slp_rearrange_stmts): Likewise.
	(vect_analyze_slp_instance): Likewise.
	(vect_analyze_slp): Likewise.
	(vect_slp_analyze_node_operations_1): Update the shared
	vector type.
	(vect_slp_analyze_operations): Adjust.
	(vect_slp_analyze_bb_1): Likewise.

2020-09-16  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/t-csky-linux (CSKY_MULTILIB_OSDIRNAMES): Use mfloat-abi.
	(MULTILIB_OPTIONS): Likewise.
	* config/csky/t-csky-elf (MULTILIB_OPTIONS): Likewise.
	(MULTILIB_EXCEPTIONS): Likewise.

2020-09-16  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/arm.c (arm_option_restore): Comment out opts argument
	name to avoid unused parameter warnings.

2020-09-16  Jakub Jelinek  <jakub@redhat.com>

	* optc-save-gen.awk: In cl_optimization_stream_out use
	bp_pack_var_len_{int,unsigned} instead of bp_pack_value.  In
	cl_optimization_stream_in use bp_unpack_var_len_{int,unsigned}
	instead of bp_unpack_value.  Formatting fix.

2020-09-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/97053
	* gimple-ssa-store-merging.c (check_no_overlap): Add FIRST_ORDER,
	START, FIRST_EARLIER and LAST_EARLIER arguments.  Return false if
	any stores between FIRST_EARLIER inclusive and LAST_EARLIER exclusive
	has order in between FIRST_ORDER and LAST_ORDER and overlaps the to
	be merged store.
	(imm_store_chain_info::try_coalesce_bswap): Add FIRST_EARLIER argument.
	Adjust check_no_overlap caller.
	(imm_store_chain_info::coalesce_immediate_stores): Add first_earlier
	and last_earlier variables, adjust them during iterations.  Adjust
	check_no_overlap callers, call check_no_overlap even when extending
	overlapping stores by extra INTEGER_CST stores.

2020-09-16  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/csky-linux-elf.h (GLIBC_DYNAMIC_LINKER): Use mfloat-abi.

2020-09-16  Kewen Lin  <linkw@linux.ibm.com>

	PR target/97019
	* config/rs6000/rs6000-p8swap.c (find_alignment_op): Adjust to
	support multiple defintions which are all AND operations with
	the mask -16B.
	(recombine_lvx_pattern): Adjust to handle multiple AND operations
	from find_alignment_op.
	(recombine_stvx_pattern): Likewise.

2020-09-16  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/csky.md (CSKY_NPARM_FREGS): New.
	(call_value_internal_vs/d): New.
	(untyped_call): New.
	* config/csky/csky.h (TARGET_SINGLE_FPU): New.
	(TARGET_DOUBLE_FPU): New.
	(FUNCTION_VARG_REGNO_P): New.
	(CSKY_VREG_MODE_P): New.
	(FUNCTION_VARG_MODE_P): New.
	(CUMULATIVE_ARGS): Add extra regs info.
	(INIT_CUMULATIVE_ARGS): Use csky_init_cumulative_args.
	(FUNCTION_ARG_REGNO_P): Use FUNCTION_VARG_REGNO_P.
	* config/csky/csky-protos.h (csky_init_cumulative_args): Extern.
	* config/csky/csky.c (csky_cpu_cpp_builtins): Support TARGET_HARD_FLOAT_ABI.
	(csky_function_arg): Likewise.
	(csky_num_arg_regs): Likewise.
	(csky_function_arg_advance): Likewise.
	(csky_function_value): Likewise.
	(csky_libcall_value): Likewise.
	(csky_function_value_regno_p): Likewise.
	(csky_arg_partial_bytes): Likewise.
	(csky_setup_incoming_varargs): Likewise.
	(csky_init_cumulative_args): New.

2020-09-16  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-call.c (altivec_init_builtins): Fix name
	of __builtin_altivec_xst_len_r.

2020-09-15  Ilya Leoshkevich  <iii@linux.ibm.com>

	* rtlanal.c (set_noop_p): Treat subregs of registers in
	different modes conservatively.

2020-09-15  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Make swap
	argument by-value and do not change it.
	(vect_build_slp_tree_2): Adjust, set swap to NULL after last
	use.

2020-09-15  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/94234
	* match.pd (T)(A) +- (T)(B) -> (T)(A +- B): New simplification.

2020-09-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/96475
	* bb-reorder.c (duplicate_computed_gotos): If we did anything, run
	cleanup_cfg.

2020-09-15  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): Also consider
	building an operand from scalars when building it did not
	fail fatally but avoid messing with the upcall splitting
	of groups.

2020-09-15  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Do not
	check +D32 for CMSE if -mfloat-abi=soft

2020-09-15  liuhongt  <hongtao.liu@intel.com>

	PR target/96744
	* config/i386/x86-tune-costs.h (struct processor_costs):
	Increase mask <-> integer cost for non AVX512 target to avoid
	spill gpr to mask. Also retune mask <-> integer and
	mask_load/store for skylake_cost.

2020-09-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/97028
	* config/i386/sse.md (mul<mode>3<mask_name>_bcs,
	<avx512>_div<mode>3<mask_name>_bcst): Use <avx512bcst> instead of
	<<avx512bcst>>.

2020-09-15  Tobias Burnus  <tobias@codesourcery.com>

	PR fortran/96668
	* gimplify.c (gimplify_omp_for): Add 'bool openacc' argument;
	update omp_finish_clause calls.
	(gimplify_adjust_omp_clauses_1, gimplify_adjust_omp_clauses,
	gimplify_expr, gimplify_omp_loop): Update omp_finish_clause
	and/or gimplify_for calls.
	* langhooks-def.h (lhd_omp_finish_clause): Add bool openacc arg.
	* langhooks.c (lhd_omp_finish_clause): Likewise.
	* langhooks.h (lhd_omp_finish_clause): Likewise.
	* omp-low.c (scan_sharing_clauses): Keep GOMP_MAP_TO_PSET cause for
	'declare target' vars.

2020-09-15  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/94234
	* genmatch.c (dt_simplify::gen_1): Emit check on final simplification
	result when "!" is specified on toplevel output expr.
	* match.pd ((A * C) +- (B * C) -> (A +- B) * C): Allow folding on expr
	with multi-use operands if final result is a simple gimple value.

2020-09-14  Sergei Trofimovich  <siarheit@google.com>

	* doc/invoke.texi: fix '-fprofile-reproducibility' option
	spelling in manual.

2020-09-14  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.md ("nop"): Re-define as `ja 0'.

2020-09-14  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraphunit.c (cgraph_node::expand_thunk): Make sure to set
	cfun->tail_call_marked when forcing a tail call.
	* function.c (assign_parm_setup_reg): Always use a register to
	load a parameter passed by reference if cfun->tail_call_marked.

2020-09-14  Pat Haugen  <pthaugen@linux.ibm.com>

	* config/rs6000/power10.md (power10-mffgpr, power10-mftgpr): Rename to
	power10-mtvsr/power10-mfvsr.
	* config/rs6000/power6.md (X2F_power6, power6-mftgpr, power6-mffgpr):
	Remove.
	* config/rs6000/power8.md (power8-mffgpr, power8-mftgpr): Rename to
	power8-mtvsr/power8-mfvsr.
	* config/rs6000/power9.md (power9-mffgpr, power9-mftgpr): Rename to
	power9-mtvsr/power9-mfvsr.
	* config/rs6000/rs6000.c (rs6000_adjust_cost): Remove Power6
	TYPE_MFFGPR cases.
	* config/rs6000/rs6000.md (mffgpr, mftgpr, zero_extendsi<mode>2,
	extendsi<mode>2, @signbit<mode>2_dm, lfiwax, lfiwzx, *movsi_internal1,
	movsi_from_sf, *movdi_from_sf_zero_ext, *mov<mode>_internal,
	movsd_hardfloat, movsf_from_si, *mov<mode>_hardfloat64, p8_mtvsrwz,
	p8_mtvsrd_df, p8_mtvsrd_sf, p8_mfvsrd_3_<mode>, *movdi_internal64,
	unpack<mode>_dm): Rename mffgpr/mftgpr to mtvsr/mfvsr.
	* config/rs6000/vsx.md (vsx_mov<mode>_64bit, vsx_extract_<mode>,
	vsx_extract_si, *vsx_extract_<mode>_p8): Likewise.

2020-09-14  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/arm.opt (x_arm_arch_string, x_arm_cpu_string,
	x_arm_tune_string): Remove TargetSave entries.
	(march=, mcpu=, mtune=): Add Save keyword.
	* config/arm/arm.c (arm_option_save): Remove.
	(TARGET_OPTION_SAVE): Don't redefine.
	(arm_option_restore): Don't restore x_arm_*_string here.

2020-09-14  Jakub Jelinek  <jakub@redhat.com>

	* opt-read.awk: Also initialize extra_target_var_types array.
	* opth-gen.awk: Emit explicit_mask arrays to struct cl_optimization
	and cl_target_option.  Adjust cl_optimization_save,
	cl_optimization_restore, cl_target_option_save and
	cl_target_option_restore declarations.
	* optc-save-gen.awk: Add opts_set argument to cl_optimization_save,
	cl_optimization_restore, cl_target_option_save and
	cl_target_option_restore functions and save or restore opts_set
	next to the opts values into or from explicit_mask arrays.
	In cl_target_option_eq and cl_optimization_option_eq compare
	explicit_mask arrays, in cl_target_option_hash and cl_optimization_hash
	hash them and in cl_target_option_stream_out,
	cl_target_option_stream_in, cl_optimization_stream_out and
	cl_optimization_stream_in stream them.
	* tree.h (build_optimization_node, build_target_option_node): Add
	opts_set argument.
	* tree.c (build_optimization_node): Add opts_set argument, pass it
	to cl_optimization_save.
	(build_target_option_node): Add opts_set argument, pass it to
	cl_target_option_save.
	* function.c (invoke_set_current_function_hook): Adjust
	cl_optimization_restore caller.
	* ipa-inline-transform.c (inline_call): Adjust cl_optimization_restore
	and build_optimization_node callers.
	* target.def (TARGET_OPTION_SAVE, TARGET_OPTION_RESTORE): Add opts_set
	argument.
	* target-globals.c (save_target_globals_default_opts): Adjust
	cl_optimization_restore callers.
	* toplev.c (process_options): Adjust build_optimization_node and
	cl_optimization_restore callers.
	(target_reinit): Adjust cl_optimization_restore caller.
	* tree-streamer-in.c (lto_input_ts_function_decl_tree_pointers):
	Adjust build_optimization_node and cl_optimization_restore callers.
	* doc/tm.texi: Updated.
	* config/aarch64/aarch64.c (aarch64_override_options): Adjust
	build_target_option_node caller.
	(aarch64_option_save, aarch64_option_restore): Add opts_set argument.
	(aarch64_set_current_function): Adjust cl_target_option_restore
	caller.
	(aarch64_option_valid_attribute_p): Adjust cl_target_option_save,
	cl_target_option_restore, cl_optimization_restore,
	build_optimization_node and build_target_option_node callers.
	* config/aarch64/aarch64-c.c (aarch64_pragma_target_parse): Adjust
	cl_target_option_restore and build_target_option_node callers.
	* config/arm/arm.c (arm_option_save, arm_option_restore): Add
	opts_set argument.
	(arm_option_override): Adjust cl_target_option_save,
	build_optimization_node and build_target_option_node callers.
	(arm_set_current_function): Adjust cl_target_option_restore caller.
	(arm_valid_target_attribute_tree): Adjust build_target_option_node
	caller.
	(add_attribute): Formatting fix.
	(arm_valid_target_attribute_p): Adjust cl_optimization_restore,
	cl_target_option_restore, arm_valid_target_attribute_tree and
	build_optimization_node callers.
	* config/arm/arm-c.c (arm_pragma_target_parse): Adjust
	cl_target_option_restore callers.
	* config/csky/csky.c (csky_option_override): Adjust
	build_target_option_node and cl_target_option_save callers.
	* config/gcn/gcn.c (gcn_fixup_accel_lto_options): Adjust
	build_optimization_node and cl_optimization_restore callers.
	* config/i386/i386-builtins.c (get_builtin_code_for_version):
	Adjust cl_target_option_save and cl_target_option_restore
	callers.
	* config/i386/i386-c.c (ix86_pragma_target_parse): Adjust
	build_target_option_node and cl_target_option_restore callers.
	* config/i386/i386-options.c (ix86_function_specific_save,
	ix86_function_specific_restore): Add opts_set arguments.
	(ix86_valid_target_attribute_tree): Adjust build_target_option_node
	caller.
	(ix86_valid_target_attribute_p): Adjust build_optimization_node,
	cl_optimization_restore, cl_target_option_restore,
	ix86_valid_target_attribute_tree and build_optimization_node callers.
	(ix86_option_override_internal): Adjust build_target_option_node
	caller.
	(ix86_reset_previous_fndecl, ix86_set_current_function): Adjust
	cl_target_option_restore callers.
	* config/i386/i386-options.h (ix86_function_specific_save,
	ix86_function_specific_restore): Add opts_set argument.
	* config/nios2/nios2.c (nios2_option_override): Adjust
	build_target_option_node caller.
	(nios2_option_save, nios2_option_restore): Add opts_set argument.
	(nios2_valid_target_attribute_tree): Adjust build_target_option_node
	caller.
	(nios2_valid_target_attribute_p): Adjust build_optimization_node,
	cl_optimization_restore, cl_target_option_save and
	cl_target_option_restore callers.
	(nios2_set_current_function, nios2_pragma_target_parse): Adjust
	cl_target_option_restore callers.
	* config/pru/pru.c (pru_option_override): Adjust
	build_target_option_node caller.
	(pru_set_current_function): Adjust cl_target_option_restore
	callers.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust
	cl_target_option_save caller.
	(rs6000_option_override_internal): Adjust build_target_option_node
	caller.
	(rs6000_valid_attribute_p): Adjust build_optimization_node,
	cl_optimization_restore, cl_target_option_save,
	cl_target_option_restore and build_target_option_node callers.
	(rs6000_pragma_target_parse): Adjust cl_target_option_restore and
	build_target_option_node callers.
	(rs6000_activate_target_options): Adjust cl_target_option_restore
	callers.
	(rs6000_function_specific_save, rs6000_function_specific_restore):
	Add opts_set argument.
	* config/s390/s390.c (s390_function_specific_restore): Likewise.
	(s390_option_override_internal): Adjust s390_function_specific_restore
	caller.
	(s390_option_override, s390_valid_target_attribute_tree): Adjust
	build_target_option_node caller.
	(s390_valid_target_attribute_p): Adjust build_optimization_node,
	cl_optimization_restore and cl_target_option_restore callers.
	(s390_activate_target_options): Adjust cl_target_option_restore
	caller.
	* config/s390/s390-c.c (s390_cpu_cpp_builtins): Adjust
	cl_target_option_save caller.
	(s390_pragma_target_parse): Adjust build_target_option_node and
	cl_target_option_restore callers.

2020-09-13  Roger Sayle  <roger@nextmovesoftware.com>

	* config/pa/pa.c (hppa_rtx_costs) [ASHIFT, ASHIFTRT, LSHIFTRT]:
	Provide accurate costs for DImode shifts of integer constants.

2020-09-12  Roger Sayle  <roger@nextmovesoftware.com>
	    John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.md (shrpsi4_1, shrpsi4_2): New define_insns split
	out from previous shrpsi4 providing two commutitive variants using
	plus_xor_ior_operator as a predicate.
	(shrpdi4_1, shrpdi4_2, shrpdi_3, shrpdi_4): Likewise DImode versions
	where _1 and _2 take register shifts, and _3 and _4 for integers.
	(rotlsi3_internal): Name this anonymous instruction.
	(rotrdi3): New DImode insn copied from rotrsi3.
	(rotldi3): New DImode expander copied from rotlsi3.
	(rotldi4_internal): New DImode insn copied from rotsi3_internal.

2020-09-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_maybe_emit_maxc_minc): Rename
	from rs6000_emit_p9_fp_minmax.  Change return type to bool.  Add
	comments to document NaN/signed zero behavior.
	(rs6000_maybe_emit_fp_cmove): Rename from rs6000_emit_p9_fp_cmove.
	(have_compare_and_set_mask): New helper function.
	(rs6000_emit_cmove): Update calls to new names and the new helper
	function.

2020-09-11  Nathan Sidwell  <nathan@acm.org>

	* config/i386/sse.md (mov<mode>): Fix operand indices.

2020-09-11  Martin Sebor  <msebor@redhat.com>

	PR middle-end/96903
	* builtins.c (compute_objsize): Remove incorrect offset adjustment.
	(compute_objsize): Adjust offset range here instead.

2020-09-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97020
	* tree-vect-slp.c (vect_slp_analyze_operations): Apply
	SLP costs when doing loop vectorization.

2020-09-11  Tom de Vries  <tdevries@suse.de>

	PR target/96964
	* config/nvptx/nvptx.md (define_expand "atomic_test_and_set"): New
	expansion.

2020-09-11  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_hard_regno_mode_ok): Align TImode registers.
	* config/gcn/gcn.md: Assert that TImode registers do not early clobber.

2020-09-11  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_instance::location): New method.
	(vect_schedule_slp): Adjust prototype.
	* tree-vectorizer.c (vec_info::remove_stmt): Adjust
	the BB region begin if we removed the stmt it points to.
	* tree-vect-loop.c (vect_transform_loop): Adjust.
	* tree-vect-slp.c (_slp_instance::location): Implement.
	(vect_analyze_slp_instance): For BB vectorization set
	vect_location to that of the instance.
	(vect_slp_analyze_operations): Likewise.
	(vect_bb_vectorization_profitable_p): Remove wrapper.
	(vect_slp_analyze_bb_1): Remove cost check here.
	(vect_slp_region): Cost check and code generate subgraphs separately,
	report optimized locations and missed optimizations due to
	profitability for each of them.
	(vect_schedule_slp): Get the vector of SLP graph entries to
	vectorize as argument.

2020-09-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/97013
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Remove duplicate dumping.

2020-09-11  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_1): Check vector
	types for all lanes are compatible.
	(vect_analyze_slp_instance): Appropriately check for stores.
	(vect_schedule_slp): Likewise.

2020-09-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_assemble_value): Fix undefined
	behaviour.

2020-09-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_assemble_value): Handle negative
	__int128.

2020-09-11  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Change default.

2020-09-10  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-protos.h (rs6000_emit_cmove): Change return
	type to bool.
	(rs6000_emit_int_cmove): Change return type to bool.
	* config/rs6000/rs6000.c (rs6000_emit_cmove): Change return type
	to bool.
	(rs6000_emit_int_cmove): Change return type to bool.

2020-09-10  Tom de Vries  <tdevries@suse.de>

	PR target/97004
	* config/nvptx/nvptx.c (nvptx_assemble_value): Handle shift by
	number of bits in shift operand.

2020-09-10  Jakub Jelinek  <jakub@redhat.com>

	* lto-streamer-out.c (collect_block_tree_leafs): Recurse on
	root rather than BLOCK_SUBBLOCKS (root).

2020-09-10  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64-cores.def: Add Cortex-R82.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Add entry for Cortex-R82.

2020-09-10  Alex Coplan  <alex.coplan@arm.com>

	* common/config/aarch64/aarch64-common.c
	(aarch64_get_extension_string_for_isa_flags): Don't force +crc for
	Armv8-R.
	* config/aarch64/aarch64-arches.def: Add entry for Armv8-R.
	* config/aarch64/aarch64-c.c (aarch64_define_unconditional_macros): Set
	__ARM_ARCH_PROFILE correctly for Armv8-R.
	* config/aarch64/aarch64.h (AARCH64_FL_V8_R): New.
	(AARCH64_FL_FOR_ARCH8_R): New.
	(AARCH64_ISA_V8_R): New.
	* doc/invoke.texi: Add Armv8-R to architecture table.

2020-09-10  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/arm.c (arm_override_options_after_change_1): Add opts_set
	argument, test opts_set->x_str_align_functions rather than
	opts->x_str_align_functions.
	(arm_override_options_after_change, arm_option_override_internal,
	arm_set_current_function): Adjust callers.

2020-09-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/96939
	* config/arm/arm.c (arm_override_options_after_change): Don't call
	arm_configure_build_target here.
	(arm_set_current_function): Call arm_override_options_after_change_1
	at the end.

2020-09-10  Pat Haugen  <pthaugen@linux.ibm.com>

	* config/rs6000/rs6000.md
	(lfiwzx, floatunssi<mode>2_lfiwzx, p8_mtvsrwz, p8_mtvsrd_sf): Fix insn
	type.
	* config/rs6000/vsx.md
	(vsx_concat_<mode>, vsx_splat_<mode>_reg, vsx_splat_v4sf): Likewise.

2020-09-10  Jonathan Yong  <10walls@gmail.com>

	* config.host: Adjust plugin name for Windows.

2020-09-10  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/97000
	* tree-cfgcleanup.c (cleanup_call_ctrl_altering_flag): Don't clear
	flag for IFN_UNIQUE.

2020-09-10  Jakub Jelinek  <jakub@redhat.com>

	PR debug/93865
	* lto-streamer.h (struct output_block): Add emit_pwd member.
	* lto-streamer-out.c: Include toplev.h.
	(clear_line_info): Set emit_pwd.
	(lto_output_location_1): Encode the ob->current_file != xloc.file
	bit directly into the location number.  If changing file, emit
	additionally a bit whether pwd is emitted and emit it before the
	first relative pathname since clear_line_info.
	(output_function, output_constructor): Don't call clear_line_info
	here.
	* lto-streamer-in.c (struct string_pair_map): New type.
	(struct string_pair_map_hasher): New type.
	(string_pair_map_hasher::hash): New method.
	(string_pair_map_hasher::equal): New method.
	(path_name_pair_hash_table, string_pair_map_allocator): New variables.
	(relative_path_prefix, canon_relative_path_prefix,
	canon_relative_file_name): New functions.
	(canon_file_name): Add relative_prefix argument, if non-NULL
	and string is a relative path, return canon_relative_file_name.
	(lto_location_cache::input_location_and_block): Decode file change
	bit from the location number.  If changing file, unpack bit whether
	pwd is streamed and stream in pwd.  Adjust canon_file_name caller.
	(lto_free_file_name_hash): Delete path_name_pair_hash_table
	and string_pair_map_allocator.

2020-09-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96043
	* tree-vectorizer.h (_slp_instance::cost_vec): New.
	(_slp_instance::subgraph_entries): Likewise.
	(BB_VINFO_TARGET_COST_DATA): Remove.
	* tree-vect-slp.c (vect_free_slp_instance): Free
	cost_vec and subgraph_entries.
	(vect_analyze_slp_instance): Initialize them.
	(vect_slp_analyze_operations): Defer passing costs to
	the target, instead record them in the SLP graph entry.
	(get_ultimate_leader): New helper for graph partitioning.
	(vect_bb_partition_graph_r): Likewise.
	(vect_bb_partition_graph): New function to partition the
	SLP graph into independently costable parts.
	(vect_bb_vectorization_profitable_p): Adjust to work on
	a subgraph.
	(vect_bb_vectorization_profitable_p): New wrapper,
	discarding non-profitable vectorization of subgraphs.
	(vect_slp_analyze_bb_1): Call vect_bb_partition_graph before
	costing.

2020-09-09  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/94355
	* doc/invoke.texi: Document -Wanalyzer-mismatching-deallocation.

2020-09-09  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/96475
	* bb-reorder.c (maybe_duplicate_computed_goto): Remove single_pred_p
	micro-optimization.

2020-09-09  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Fix Wformat
	warning.

2020-09-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Do
	nothing when the permutation doesn't permute.

2020-09-09  Tom de Vries  <tdevries@suse.de>

	PR target/96991
	* config/nvptx/nvptx.c (write_fn_proto): Fix boolean type check.

2020-09-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vectorizable_comparison): Allow
	STMT_VINFO_LIVE_P stmts.

2020-09-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vectorizable_condition): Allow
	STMT_VINFO_LIVE_P stmts.

2020-09-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96978
	* tree-vect-stmts.c (vectorizable_condition): Do not
	look at STMT_VINFO_LIVE_P for BB vectorization.
	(vectorizable_comparison): Likewise.

2020-09-09  liuhongt  <hongtao.liu@intel.com>

	PR target/96955
	* config/i386/i386.md (get_thread_pointer<mode>): New
	expander.

2020-09-08  Julian Brown  <julian@codesourcery.com>

	* config/gcn/gcn-valu.md (scatter<mode>_insn_1offset_ds<exec_scatter>):
	Add waitcnt.
	* config/gcn/gcn.md (*mov<mode>_insn, *movti_insn): Add waitcnt to
	ds_write alternatives.

2020-09-08  Julian Brown  <julian@codesourcery.com>

	* config/gcn/mkoffload.c (process_asm): Initialise regcount.  Update
	scanning for SGPR/VGPR usage for HSACO v3.

2020-09-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/96967
	* tree-vrp.c (find_case_label_range): Cast label range to
	type of switch operand.

2020-09-08  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_file_end): Fix jumbled
	HAVE_AS_MSPABI_ATTRIBUTE and HAVE_AS_GNU_ATTRIBUTE checks.
	* configure: Regenerate.
	* configure.ac: Use ".mspabi_attribute 4,2" to check for assembler
	support for this object attribute directive.

2020-09-08  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* common/config/msp430/msp430-common.c (msp430_handle_option): Remove
	OPT_mcpu_ handling.
	Set target_cpu value to new enum values when parsing certain -mmcu=
	values.
	* config/msp430/msp430-opts.h (enum msp430_cpu_types): New.
	* config/msp430/msp430.c (msp430_option_override): Handle new
	target_cpu enum values.
	Set target_cpu using extracted value for given MCU when -mcpu=
	option is not passed by the user.
	* config/msp430/msp430.opt: Handle -mcpu= values using enums.

2020-09-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/96796
	* lra-constraints.c (in_class_p): Add a default-false
	allow_all_reload_class_changes_p parameter.  Do not treat
	reload moves specially when the parameter is true.
	(get_reload_reg): Try to narrow the class of an existing OP_OUT
	reload if we're reloading a reload pseudo in a reload instruction.

2020-09-07  Andrea Corallo  <andrea.corallo@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Revert
	dead-code removal introduced by 09fa6acd8d9 + add a comment to
	clarify.

2020-09-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/rtl.texi (subreg): Fix documentation to state there is a known
	number of undefined bits in regs and subregs of MODE_PARTIAL_INT modes.

2020-09-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_option_override): Don't set the
	ISA to 430 when the MCU is unrecognized.

2020-09-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_libc_has_function): Report sincos
	available from 10.9.

2020-09-07  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64.md (*adds_mul_imm_<mode>): Delete.
	(*subs_mul_imm_<mode>): Delete.
	(*adds_<optab><mode>_multp2): Delete.
	(*subs_<optab><mode>_multp2): Delete.
	(*add_mul_imm_<mode>): Delete.
	(*add_<optab><ALLX:mode>_mult_<GPI:mode>): Delete.
	(*add_<optab><SHORT:mode>_mult_si_uxtw): Delete.
	(*add_<optab><mode>_multp2): Delete.
	(*add_<optab>si_multp2_uxtw): Delete.
	(*add_uxt<mode>_multp2): Delete.
	(*add_uxtsi_multp2_uxtw): Delete.
	(*sub_mul_imm_<mode>): Delete.
	(*sub_mul_imm_si_uxtw): Delete.
	(*sub_<optab><mode>_multp2): Delete.
	(*sub_<optab>si_multp2_uxtw): Delete.
	(*sub_uxt<mode>_multp2): Delete.
	(*sub_uxtsi_multp2_uxtw): Delete.
	(*neg_mul_imm_<mode>2): Delete.
	(*neg_mul_imm_si2_uxtw): Delete.
	* config/aarch64/predicates.md (aarch64_pwr_imm3): Delete.
	(aarch64_pwr_2_si): Delete.
	(aarch64_pwr_2_di): Delete.

2020-09-07  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64.md
	(*adds_<optab><ALLX:mode>_<GPI:mode>): Ensure extended operand
	agrees with width of extension specifier.
	(*subs_<optab><ALLX:mode>_<GPI:mode>): Likewise.
	(*adds_<optab><ALLX:mode>_shift_<GPI:mode>): Likewise.
	(*subs_<optab><ALLX:mode>_shift_<GPI:mode>): Likewise.
	(*add_<optab><ALLX:mode>_<GPI:mode>): Likewise.
	(*add_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.
	(*add_uxt<mode>_shift2): Likewise.
	(*sub_<optab><ALLX:mode>_<GPI:mode>): Likewise.
	(*sub_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.
	(*sub_uxt<mode>_shift2): Likewise.
	(*cmp_swp_<optab><ALLX:mode>_reg<GPI:mode>): Likewise.
	(*cmp_swp_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.

2020-09-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Dump
	stmts we start SLP analysis from, failure and splitting.
	(vect_schedule_slp): Dump SLP graph entry and root stmt
	we are about to emit code for.

2020-09-07  Martin Storsjö  <martin@martin.st>

	* dwarf2out.c (file_name_acquire): Make a strchr return value
	pointer to const.

2020-09-07  Jakub Jelinek  <jakub@redhat.com>

	PR debug/94235
	* lto-streamer-out.c (output_cfg): Also stream goto_locus for edges.
	Use bp_pack_var_len_unsigned instead of streamer_write_uhwi to stream
	e->dest->index and e->flags.
	(output_function): Call output_cfg before output_ssa_name, rather than
	after streaming all bbs.
	* lto-streamer-in.c (input_cfg): Stream in goto_locus for edges.
	Use bp_unpack_var_len_unsigned instead of streamer_read_uhwi to stream
	in dest_index and edge_flags.

2020-09-07  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vectorizable_live_operation): Adjust.
	* tree-vect-loop.c (vectorizable_live_operation): Vectorize
	live lanes out of basic-block vectorization nodes.
	* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): New function.
	(vect_slp_analyze_operations): Analyze live lanes and their
	vectorization possibility after the whole SLP graph is final.
	(vect_bb_slp_scalar_cost): Adjust for vectorized live lanes.
	* tree-vect-stmts.c (can_vectorize_live_stmts): Adjust.
	(vect_transform_stmt): Call can_vectorize_live_stmts also for
	basic-block vectorization.

2020-09-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96698
	PR tree-optimization/96920
	* tree-vectorizer.h (loop_vec_info::reduc_latch_defs): Remove.
	(loop_vec_info::reduc_latch_slp_defs): Likewise.
	* tree-vect-stmts.c (vect_transform_stmt): Remove vectorized
	cycle PHI latch code.
	* tree-vect-loop.c (maybe_set_vectorized_backedge_value): New
	helper to set vectorized cycle PHI latch values.
	(vect_transform_loop): Walk over all PHIs again after
	vectorizing them, calling maybe_set_vectorized_backedge_value.
	Call maybe_set_vectorized_backedge_value for each vectorized
	stmt.  Remove delayed update code.
	* tree-vect-slp.c (vect_analyze_slp_instance): Initialize
	SLP instance reduc_phis member.
	(vect_schedule_slp): Set vectorized cycle PHI latch values.

2020-09-04  Andrea Corallo  <andrea.corallo@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Remove
	dead code as LOOP_VINFO_USING_PARTIAL_VECTORS_P (loop_vinfo) is
	always verified.

2020-09-04  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/96769
	* config/arm/thumb1.md: Move movsi splitter for
	arm_disable_literal_pool after the other movsi splitters.

2020-09-04  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (range_operator::fold_range): Rename widest_irange
	to int_range_max.
	(operator_div::wi_fold): Same.
	(operator_lshift::op1_range): Same.
	(operator_rshift::op1_range): Same.
	(operator_cast::fold_range): Same.
	(operator_cast::op1_range): Same.
	(operator_bitwise_and::remove_impossible_ranges): Same.
	(operator_bitwise_and::op1_range): Same.
	(operator_abs::op1_range): Same.
	(range_cast): Same.
	(widest_irange_tests): Same.
	(range3_tests): Rename irange3 to int_range3.
	(int_range_max_tests): Rename from widest_irange_tests.
	Rename widest_irange to int_range_max.
	(operator_tests): Rename widest_irange to int_range_max.
	(range_tests): Same.
	* tree-vrp.c (find_case_label_range): Same.
	* value-range.cc (irange::irange_intersect): Same.
	(irange::invert): Same.
	* value-range.h: Same.

2020-09-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96931
	* tree-cfgcleanup.c (cleanup_call_ctrl_altering_flag): If
	there's a fallthru edge and no abnormal edge the call is
	no longer control-altering.
	(cleanup_control_flow_bb): Pass down the BB to
	cleanup_call_ctrl_altering_flag.

2020-09-04  Jakub Jelinek  <jakub@redhat.com>

	* lto-streamer.h (stream_input_location_now): Remove declaration.
	* lto-streamer-in.c (stream_input_location_now): Remove.
	(input_eh_region, input_struct_function_base): Use
	stream_input_location instead of stream_input_location_now.

2020-09-04  Jakub Jelinek  <jakub@redhat.com>

	* lto-streamer.h (struct output_block): Add reset_locus member.
	* lto-streamer-out.c (clear_line_info): Set reset_locus to true.
	(lto_output_location_1): If reset_locus, clear it and ensure
	current_{file,line,col} is different from xloc members.

2020-09-04  David Faust  <david.faust@oracle.com>

	* config/bpf/bpf.h (ASM_SPEC): Pass -mxbpf to gas, if specified.
	* config/bpf/bpf.c (bpf_output_call): Support indirect calls in xBPF.

2020-09-03  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/96820
	* tree-sra.c (create_access): Disqualify candidates with accesses
	beyond the end of the original aggregate.
	(maybe_add_sra_candidate): Check that candidate type size fits
	signed uhwi for the sake of consistency.

2020-09-03  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000-call.c (rs6000_init_builtin): Update V2DI_type_node
	and unsigned_V2DI_type_node definitions.

2020-09-03  Jakub Jelinek  <jakub@redhat.com>

	PR c++/96901
	* tree.h (struct decl_tree_traits): New type.
	(decl_tree_map): New typedef.

2020-09-03  Jakub Jelinek  <jakub@redhat.com>

	PR lto/94311
	* gimple.h (gimple_location_ptr, gimple_phi_arg_location_ptr): New
	functions.
	* streamer-hooks.h (struct streamer_hooks): Add
	output_location_and_block callback.  Fix up formatting for
	output_location.
	(stream_output_location_and_block): Define.
	* lto-streamer.h (class lto_location_cache): Fix comment typo.  Add
	current_block member.
	(lto_location_cache::input_location_and_block): New method.
	(lto_location_cache::lto_location_cache): Initialize current_block.
	(lto_location_cache::cached_location): Add block member.
	(struct output_block): Add current_block member.
	(lto_output_location): Formatting fix.
	(lto_output_location_and_block): Declare.
	* lto-streamer.c (lto_streamer_hooks_init): Initialize
	streamer_hooks.output_location_and_block.
	* lto-streamer-in.c (lto_location_cache::cmp_loc): Also compare
	block members.
	(lto_location_cache::apply_location_cache): Handle blocks.
	(lto_location_cache::accept_location_cache,
	lto_location_cache::revert_location_cache): Fix up function comments.
	(lto_location_cache::input_location_and_block): New method.
	(lto_location_cache::input_location): Implement using
	input_location_and_block.
	(input_function): Invoke apply_location_cache after streaming in all
	bbs.
	* lto-streamer-out.c (clear_line_info): Set current_block.
	(lto_output_location_1): New function, moved from lto_output_location,
	added block handling.
	(lto_output_location): Implement using lto_output_location_1.
	(lto_output_location_and_block): New function.
	* gimple-streamer-in.c (input_phi): Use input_location_and_block
	to input and cache both location and block.
	(input_gimple_stmt): Likewise.
	* gimple-streamer-out.c (output_phi): Use
	stream_output_location_and_block.
	(output_gimple_stmt): Likewise.

2020-09-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-generic.c (tree_vec_extract): Remove odd
	special-casing of boolean vectors.
	* fold-const.c (fold_ternary_loc): Handle boolean vector
	type BIT_FIELD_REFs.

2020-09-03  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/87767
	* config/i386/i386-features.c
	(replace_constant_pool_with_broadcast): New function.
	(constant_pool_broadcast): Ditto.
	(class pass_constant_pool_broadcast): New pass.
	(make_pass_constant_pool_broadcast): Ditto.
	(remove_partial_avx_dependency): Call
	replace_constant_pool_with_broadcast under TARGET_AVX512F, it
	would save compile time when both pass rpad and cpb are
	available.
	(remove_partial_avx_dependency_gate): New function.
	(class pass_remove_partial_avx_dependency::gate): Call
	remove_partial_avx_dependency_gate.
	* config/i386/i386-passes.def: Insert new pass after combine.
	* config/i386/i386-protos.h
	(make_pass_constant_pool_broadcast): Declare.
	* config/i386/sse.md (*avx512dq_mul<mode>3<mask_name>_bcst):
	New define_insn.
	(*avx512f_mul<mode>3<mask_name>_bcst): Ditto.
	* config/i386/avx512fintrin.h (_mm512_set1_ps,
	_mm512_set1_pd,_mm512_set1_epi32, _mm512_set1_epi64): Adjusted.

2020-09-02  Jonathan Wakely  <jwakely@redhat.com>

	PR c++/60304
	* ginclude/stdbool.h (bool, false, true): Never define for C++.

2020-09-02  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/invoke.texi (MSP430 options): Fix -mlarge description to
	indicate size_t is a 20-bit type.

2020-09-02  Roger Sayle  <roger@nextmovesoftware.com>

	* config/pa/pa.c (hppa_rtx_costs) [ASHIFT, ASHIFTRT, LSHIFTRT]:
	Provide accurate costs for shifts of integer constants.

2020-09-02  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.c (bpf_asm_named_section): Delete.
	(TARGET_ASM_NAMED_SECTION): Likewise.

2020-09-02  Jose E. Marchesi  <jemarch@gnu.org>

	* config.gcc: Use elfos.h in bpf-*-* targets.
	* config/bpf/bpf.h (MAX_OFILE_ALIGNMENT): Remove definition.
	(COMMON_ASM_OP): Likewise.
	(INIT_SECTION_ASM_OP): Likewise.
	(FINI_SECTION_ASM_OP): Likewise.
	(ASM_OUTPUT_SKIP): Likewise.
	(ASM_OUTPUT_ALIGNED_COMMON): Likewise.
	(ASM_OUTPUT_ALIGNED_LOCAL): Likewise.

2020-09-01  Martin Sebor  <msebor@redhat.com>

	* builtins.c (compute_objsize):  Only replace the upper bound
	of a POINTER_PLUS offset when it's less than the lower bound.

2020-09-01  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96808
	* config/rs6000/rs6000-call.c (rs6000_gimple_fold_mma_builtin): Do not
	reuse accumulator memory reference for source and destination accesses.

2020-09-01  Martin Liska  <mliska@suse.cz>

	* cfgrtl.c (rtl_create_basic_block): Use default value for
	growth vector function.
	* gimple.c (gimple_set_bb): Likewise.
	* symbol-summary.h: Likewise.
	* tree-cfg.c (init_empty_tree_cfg_for_function): Likewise.
	(build_gimple_cfg): Likewise.
	(create_bb): Likewise.
	(move_block_to_fn): Likewise.

2020-09-01  Martin Liska  <mliska@suse.cz>

	* vec.h (vec_safe_grow): Change default of exact to false.
	(vec_safe_grow_cleared): Likewise.

2020-09-01  Roger Sayle  <roger@nextmovesoftware.com>

	PR middle-end/90597
	* targhooks.c (default_vector_alignment): Return at least the
	GET_MODE_ALIGNMENT for the type's mode.

2020-09-01  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/96812
	* tree-ssa-address.c (copy_ref_info): Also copy dependence info.
	* cfgrtl.h (duplicate_insn_chain): Adjust prototype.
	* cfgrtl.c (duplicate_insn_chain): Remap dependence info
	if requested.
	(cfg_layout_duplicate_bb): Make sure we remap dependence info.
	* modulo-sched.c (duplicate_insns_of_cycles): Remap dependence
	info.
	(generate_prolog_epilog): Adjust.
	* config/c6x/c6x.c (hwloop_optimize): Remap dependence info.

2020-09-01  Kewen Lin  <linkw@gcc.gnu.org>

	* doc/sourcebuild.texi (has_arch_pwr5, has_arch_pwr6, has_arch_pwr7,
	has_arch_pwr8, has_arch_pwr9): Document.

2020-08-31  Carl Love  <cel@us.ibm.com>

	PR target/85830
	* config/rs6000/altivec.h (vec_popcntb, vec_popcnth, vec_popcntw,
	vec_popcntd): Remove defines.

2020-08-31  Marek Polacek  <polacek@redhat.com>
	    Jason Merrill  <jason@redhat.com>

	PR c++/93529
	* tree.c (build_constructor_from_vec): New.
	* tree.h (build_constructor_from_vec): Declare.

2020-08-31  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/96818
	* tree-vrp.c (find_case_label_range): Cast label range to
	type of switch operand.

2020-08-31  liuhongt  <hongtao.liu@intel.com>

	PR target/96551
	* config/i386/sse.md (vec_unpacku_float_hi_v16si): For vector
	compare to integer mask, don't use gen_rtx_LT, use
	ix86_expand_mask_vec_cmp instead.
	(vec_unpacku_float_hi_v16si): Ditto.

2020-08-31  Jakub Jelinek  <jakub@redhat.com>

	* tree-cfg.c (verify_gimple_switch): If the first non-default case
	label has CASE_HIGH, verify it has the same type as CASE_LOW.

2020-08-31  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/96806
	* ipa-cp.c (decide_about_value): Use safe_add to avoid cost addition
	overflow.

2020-08-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/54201
	* varasm.c: Include alloc-pool.h.
	(output_constant_pool_contents): Emit desc->mark < 0 entries as
	aliases.
	(struct constant_descriptor_rtx_data): New type.
	(constant_descriptor_rtx_data_cmp): New function.
	(struct const_rtx_data_hasher): New type.
	(const_rtx_data_hasher::hash, const_rtx_data_hasher::equal): New
	methods.
	(optimize_constant_pool): New function.
	(output_shared_constant_pool): Call it if TARGET_SUPPORTS_ALIASES.

2020-08-31  Kewen Lin  <linkw@gcc.gnu.org>

	* doc/sourcebuild.texi (vect_len_load_store,
	vect_partial_vectors_usage_1, vect_partial_vectors_usage_2,
	vect_partial_vectors): Document.

2020-08-30  Martin Sebor  <msebor@redhat.com>

	* builtins.c (access_ref::access_ref): Call get_size_range instead
	of get_range.

2020-08-30  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (ssse3_pshufbv8qi): Use gen_int_mode instead of
	GEN_INT, and ix86_build_const_vector instead of gen_rtvec and
	gen_rtx_CONT_VECTOR.

2020-08-29  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-builtin.def (MASK_FOR_STORE): Remove.
	* config/rs6000/rs6000-call.c (rs6000_expand_builtin): Remove
	all logic for ALTIVEC_BUILTIN_MASK_FOR_STORE.

2020-08-28  Martin Sebor  <msebor@redhat.com>

	* attribs.c (init_attr_rdwr_indices): Use global access_mode.
	* attribs.h (struct attr_access): Same.
	* builtins.c (fold_builtin_strlen): Add argument.
	(compute_objsize): Declare.
	(get_range): Declare.
	(check_read_access): New function.
	(access_ref::access_ref): Define ctor.
	(warn_string_no_nul): Add arguments.  Handle -Wstrintop-overread.
	(check_nul_terminated_array): Handle source strings of different
	ranges of sizes.
	(expand_builtin_strlen): Remove warning code, call check_read_access
	instead.  Declare locals closer to their initialization.
	(expand_builtin_strnlen): Same.
	(maybe_warn_for_bound): New function.
	(warn_for_access): Remove argument.  Handle -Wstrintop-overread.
	(inform_access): Change argument type.
	(get_size_range): New function.
	(check_access): Remove unused arguments.  Add new arguments.  Handle
	-Wstrintop-overread.  Move warning code to helpers and call them.
	Call check_nul_terminated_array.
	(check_memop_access): Remove unnecessary and provide additional
	arguments in calls.
	(expand_builtin_memchr): Call check_read_access.
	(expand_builtin_strcat): Remove unnecessary and provide additional
	arguments in calls.
	(expand_builtin_strcpy): Same.
	(expand_builtin_strcpy_args): Same.  Avoid testing no-warning bit.
	(expand_builtin_stpcpy_1): Remove unnecessary and provide additional
	arguments in calls.
	(expand_builtin_stpncpy): Same.
	(check_strncat_sizes): Same.
	(expand_builtin_strncat): Remove unnecessary and provide additional
	arguments in calls.  Adjust comments.
	(expand_builtin_strncpy): Remove unnecessary and provide additional
	arguments in calls.
	(expand_builtin_memcmp): Remove warning code.  Call check_access.
	(expand_builtin_strcmp): Call check_access instead of
	check_nul_terminated_array.
	(expand_builtin_strncmp): Handle -Wstrintop-overread.
	(expand_builtin_fork_or_exec): Call check_access instead of
	check_nul_terminated_array.
	(expand_builtin): Same.
	(fold_builtin_1): Pass additional argument.
	(fold_builtin_n): Same.
	(fold_builtin_strpbrk): Remove calls to check_nul_terminated_array.
	(expand_builtin_memory_chk): Add comments.
	(maybe_emit_chk_warning): Remove unnecessary and provide additional
	arguments in calls.
	(maybe_emit_sprintf_chk_warning): Same.  Adjust comments.
	* builtins.h (warn_string_no_nul): Add arguments.
	(struct access_ref): Add member and ctor argument.
	(struct access_data): Add members and ctor.
	(check_access): Adjust signature.
	* calls.c (maybe_warn_nonstring_arg): Return an indication of
	whether a warning was issued.  Issue -Wstrintop-overread instead
	of -Wstringop-overflow.
	(append_attrname): Adjust to naming changes.
	(maybe_warn_rdwr_sizes): Same.  Remove unnecessary and provide
	additional arguments in calls.
	* calls.h (maybe_warn_nonstring_arg): Return bool.
	* doc/invoke.texi (-Wstringop-overread): Document new option.
	* gimple-fold.c (gimple_fold_builtin_strcpy): Provide an additional
	argument in call.
	(gimple_fold_builtin_stpcpy): Same.
	* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Adjust to naming
	changes.
	* tree.h (enum access_mode): New type.

2020-08-28  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_call_aix): Remove test for r12.
	(rs6000_sibcall_aix): Likewise.

2020-08-28  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-tree.c (gcn_goacc_get_worker_red_decl): Add "true"
	parameter to vec_safe_grow_cleared.

2020-08-28  Martin Sebor  <msebor@redhat.com>

	* ggc-common.c (gt_pch_save): Add argument to a call.

2020-08-28  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	PR target/96357
	* config/aarch64/aarch64-sve.md
	(cond_sub<mode>_relaxed_const): Updated and renamed from
	cond_sub<mode>_any_const pattern.
	(cond_sub<mode>_strict_const): New pattern.

2020-08-28  Wei Wentao  <weiwt.fnst@cn.fujitsu.com>

	* doc/rtl.texi: Fix typo.

2020-08-28  Uros Bizjak    <ubizjak@gmail.com>

	PR target/96744
	* config/i386/i386-expand.c (split_double_mode): Also handle
	E_P2HImode and E_P2QImode.
	* config/i386/sse.md (MASK_DWI): New define_mode_iterator.
	(mov<mode>): New expander for P2HI,P2QI.
	(*mov<mode>_internal): New define_insn_and_split to split
	movement of P2QI/P2HI to 2 movqi/movhi patterns after reload.

2020-08-28  liuhongt  <hongtao.liu@intel.com>

	* common/config/i386/i386-common.c (ix86_handle_option): Set
	AVX512DQ when AVX512VP2INTERSECT exists.

2020-08-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/65146
	* config/i386/i386.c (iamcu_alignment): Don't decrease alignment
	for TYPE_ATOMIC types.
	(ix86_local_alignment): Likewise.
	(ix86_minimum_alignment): Likewise.
	(x86_field_alignment): Likewise, and emit a -Wpsabi diagnostic
	for it.

2020-08-27  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/96787
	* config/rs6000/rs6000.c (rs6000_sibcall_aix): Support
	indirect call for ELFv2.

2020-08-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96522
	* tree-ssa-address.c (copy_ref_info): Reset flow-sensitive
	info of the copied points-to.  Transfer bigger alignment
	via the access type.
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt):
	Reset all flow-sensitive info.

2020-08-27  Martin Liska  <mliska@suse.cz>

	* alias.c (init_alias_analysis): Set exact argument of a vector
	growth function to true.
	* calls.c (internal_arg_pointer_based_exp_scan): Likewise.
	* cfgbuild.c (find_many_sub_basic_blocks): Likewise.
	* cfgexpand.c (expand_asm_stmt): Likewise.
	* cfgrtl.c (rtl_create_basic_block): Likewise.
	* combine.c (combine_split_insns): Likewise.
	(combine_instructions): Likewise.
	* config/aarch64/aarch64-sve-builtins.cc (function_expander::add_output_operand): Likewise.
	(function_expander::add_input_operand): Likewise.
	(function_expander::add_integer_operand): Likewise.
	(function_expander::add_address_operand): Likewise.
	(function_expander::add_fixed_operand): Likewise.
	* df-core.c (df_worklist_dataflow_doublequeue): Likewise.
	* dwarf2cfi.c (update_row_reg_save): Likewise.
	* early-remat.c (early_remat::init_block_info): Likewise.
	(early_remat::finalize_candidate_indices): Likewise.
	* except.c (sjlj_build_landing_pads): Likewise.
	* final.c (compute_alignments): Likewise.
	(grow_label_align): Likewise.
	* function.c (temp_slots_at_level): Likewise.
	* fwprop.c (build_single_def_use_links): Likewise.
	(update_uses): Likewise.
	* gcc.c (insert_wrapper): Likewise.
	* genautomata.c (create_state_ainsn_table): Likewise.
	(add_vect): Likewise.
	(output_dead_lock_vect): Likewise.
	* genmatch.c (capture_info::capture_info): Likewise.
	(parser::finish_match_operand): Likewise.
	* genrecog.c (optimize_subroutine_group): Likewise.
	(merge_pattern_info::merge_pattern_info): Likewise.
	(merge_into_decision): Likewise.
	(print_subroutine_start): Likewise.
	(main): Likewise.
	* gimple-loop-versioning.cc (loop_versioning::loop_versioning): Likewise.
	* gimple.c (gimple_set_bb): Likewise.
	* graphite-isl-ast-to-gimple.c (translate_isl_ast_node_user): Likewise.
	* haifa-sched.c (sched_extend_luids): Likewise.
	(extend_h_i_d): Likewise.
	* insn-addr.h (insn_addresses_new): Likewise.
	* ipa-cp.c (gather_context_independent_values): Likewise.
	(find_more_contexts_for_caller_subset): Likewise.
	* ipa-devirt.c (final_warning_record::grow_type_warnings): Likewise.
	(ipa_odr_read_section): Likewise.
	* ipa-fnsummary.c (evaluate_properties_for_edge): Likewise.
	(ipa_fn_summary_t::duplicate): Likewise.
	(analyze_function_body): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	(read_ipa_call_summary): Likewise.
	* ipa-icf.c (sem_function::bb_dict_test): Likewise.
	* ipa-prop.c (ipa_alloc_node_params): Likewise.
	(parm_bb_aa_status_for_bb): Likewise.
	(ipa_compute_jump_functions_for_edge): Likewise.
	(ipa_analyze_node): Likewise.
	(update_jump_functions_after_inlining): Likewise.
	(ipa_read_edge_info): Likewise.
	(read_ipcp_transformation_info): Likewise.
	(ipcp_transform_function): Likewise.
	* ipa-reference.c (ipa_reference_write_optimization_summary): Likewise.
	* ipa-split.c (execute_split_functions): Likewise.
	* ira.c (find_moveable_pseudos): Likewise.
	* lower-subreg.c (decompose_multiword_subregs): Likewise.
	* lto-streamer-in.c (input_eh_regions): Likewise.
	(input_cfg): Likewise.
	(input_struct_function_base): Likewise.
	(input_function): Likewise.
	* modulo-sched.c (set_node_sched_params): Likewise.
	(extend_node_sched_params): Likewise.
	(schedule_reg_moves): Likewise.
	* omp-general.c (omp_construct_simd_compare): Likewise.
	* passes.c (pass_manager::create_pass_tab): Likewise.
	(enable_disable_pass): Likewise.
	* predict.c (determine_unlikely_bbs): Likewise.
	* profile.c (compute_branch_probabilities): Likewise.
	* read-rtl-function.c (function_reader::parse_block): Likewise.
	* read-rtl.c (rtx_reader::read_rtx_code): Likewise.
	* reg-stack.c (stack_regs_mentioned): Likewise.
	* regrename.c (regrename_init): Likewise.
	* rtlanal.c (T>::add_single_to_queue): Likewise.
	* sched-deps.c (init_deps_data_vector): Likewise.
	* sel-sched-ir.c (sel_extend_global_bb_info): Likewise.
	(extend_region_bb_info): Likewise.
	(extend_insn_data): Likewise.
	* symtab.c (symtab_node::create_reference): Likewise.
	* tracer.c (tail_duplicate): Likewise.
	* trans-mem.c (tm_region_init): Likewise.
	(get_bb_regions_instrumented): Likewise.
	* tree-cfg.c (init_empty_tree_cfg_for_function): Likewise.
	(build_gimple_cfg): Likewise.
	(create_bb): Likewise.
	(move_block_to_fn): Likewise.
	* tree-complex.c (tree_lower_complex): Likewise.
	* tree-if-conv.c (predicate_rhs_code): Likewise.
	* tree-inline.c (copy_bb): Likewise.
	* tree-into-ssa.c (get_ssa_name_ann): Likewise.
	(mark_phi_for_rewrite): Likewise.
	* tree-object-size.c (compute_builtin_object_size): Likewise.
	(init_object_sizes): Likewise.
	* tree-predcom.c (initialize_root_vars_store_elim_1): Likewise.
	(initialize_root_vars_store_elim_2): Likewise.
	(prepare_initializers_chain_store_elim): Likewise.
	* tree-ssa-address.c (addr_for_mem_ref): Likewise.
	(multiplier_allowed_in_address_p): Likewise.
	* tree-ssa-coalesce.c (ssa_conflicts_new): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-ssa-loop-ivopts.c (addr_offset_valid_p): Likewise.
	(get_address_cost_ainc): Likewise.
	* tree-ssa-loop-niter.c (discover_iteration_bound_by_body_walk): Likewise.
	* tree-ssa-pre.c (add_to_value): Likewise.
	(phi_translate_1): Likewise.
	(do_pre_regular_insertion): Likewise.
	(do_pre_partial_partial_insertion): Likewise.
	(init_pre): Likewise.
	* tree-ssa-propagate.c (ssa_prop_init): Likewise.
	(update_call_from_tree): Likewise.
	* tree-ssa-reassoc.c (optimize_range_tests_cmp_bitwise): Likewise.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Likewise.
	(vn_reference_lookup_pieces): Likewise.
	(eliminate_dom_walker::eliminate_push_avail): Likewise.
	* tree-ssa-strlen.c (set_strinfo): Likewise.
	(get_stridx_plus_constant): Likewise.
	(zero_length_string): Likewise.
	(find_equal_ptrs): Likewise.
	(printf_strlen_execute): Likewise.
	* tree-ssa-threadedge.c (set_ssa_name_value): Likewise.
	* tree-ssanames.c (make_ssa_name_fn): Likewise.
	* tree-streamer-in.c (streamer_read_tree_bitfields): Likewise.
	* tree-vect-loop.c (vect_record_loop_mask): Likewise.
	(vect_get_loop_mask): Likewise.
	(vect_record_loop_len): Likewise.
	(vect_get_loop_len): Likewise.
	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-slp.c (vect_slp_convert_to_external): Likewise.
	(vect_bb_slp_scalar_cost): Likewise.
	(vect_bb_vectorization_profitable_p): Likewise.
	(vectorizable_slp_permutation): Likewise.
	* tree-vect-stmts.c (vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(scan_store_can_perm_p): Likewise.
	(vectorizable_store): Likewise.
	* expr.c: Likewise.
	* vec.c (test_safe_grow_cleared): Likewise.
	* vec.h (vec_safe_grow): Likewise.
	(vec_safe_grow_cleared): Likewise.
	(vl_ptr>::safe_grow): Likewise.
	(vl_ptr>::safe_grow_cleared): Likewise.
	* config/c6x/c6x.c (insn_set_clock): Likewise.

2020-08-27  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_mem_ref): Handle TARGET_MEM_REFs.
	(dump_generic_node): Use dump_mem_ref also for TARGET_MEM_REF.

2020-08-27  Alex Coplan  <alex.coplan@arm.com>

	* lra-constraints.c (canonicalize_reload_addr): New.
	(curr_insn_transform): Use canonicalize_reload_addr to ensure we
	generate canonical RTL for an address reload.

2020-08-27  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for rounding intrinsics.

2020-08-27  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for min/max intrinsics.

2020-08-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96579
	* tree-ssa-reassoc.c (linearize_expr_tree): If we expand
	rhs via special ops make sure to swap operands.

2020-08-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96565
	* tree-ssa-dse.c (dse_classify_store): Remove defs with
	no uses from further processing.

2020-08-26  Göran Uddeborg  <goeran@uddeborg.se>

	PR gcov-profile/96285
	* common.opt, doc/invoke.texi: Clarify wording of
	-fprofile-exclude-files and adjust -fprofile-filter-files to
	match.

2020-08-26  H.J. Lu  <hjl.tools@gmail.com>

	PR target/96802
	* config/i386/i386-options.c (ix86_valid_target_attribute_inner_p):
	Reject target("no-general-regs-only").

2020-08-26  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/constraints.md (K): Change unused constraint to
	constraint to a const_int between 1 and 19.
	(P): New constraint.
	* config/msp430/msp430-protos.h (msp430x_logical_shift_right): Remove.
	(msp430_expand_shift): New.
	(msp430_output_asm_shift_insns): New.
	* config/msp430/msp430.c (msp430_rtx_costs): Remove shift costs.
	(CSH): Remove.
	(msp430_expand_helper): Remove hard-coded generation of some inline
	shift insns.
	(use_helper_for_const_shift): New.
	(msp430_expand_shift): New.
	(msp430_output_asm_shift_insns): New.
	(msp430_print_operand): Add new 'W' operand selector.
	(msp430x_logical_shift_right): Remove.
	* config/msp430/msp430.md (HPSI): New define_mode_iterator.
	(HDI): Likewise.
	(any_shift): New define_code_iterator.
	(shift_insn): New define_code_attr.
	Adjust unnamed insn patterns searched for by combine.
	(ashlhi3): Remove.
	(slli_1): Remove.
	(430x_shift_left): Remove.
	(slll_1): Remove.
	(slll_2): Remove.
	(ashlsi3): Remove.
	(ashldi3): Remove.
	(ashrhi3): Remove.
	(srai_1): Remove.
	(430x_arithmetic_shift_right): Remove.
	(srap_1): Remove.
	(srap_2): Remove.
	(sral_1): Remove.
	(sral_2): Remove.
	(ashrsi3): Remove.
	(ashrdi3): Remove.
	(lshrhi3): Remove.
	(srli_1): Remove.
	(430x_logical_shift_right): Remove.
	(srlp_1): Remove.
	(srll_1): Remove.
	(srll_2x): Remove.
	(lshrsi3): Remove.
	(lshrdi3): Remove.
	(<shift_insn><mode>3): New define_expand.
	(<shift_insn>hi3_430): New define_insn.
	(<shift_insn>si3_const): Likewise.
	(ashl<mode>3_430x): Likewise.
	(ashr<mode>3_430x): Likewise.
	(lshr<mode>3_430x): Likewise.
	(*bitbranch<mode>4_z): Replace renamed predicate msp430_bitpos with
	const_0_to_15_operand.
	* config/msp430/msp430.opt: New option -mmax-inline-shift=.
	* config/msp430/predicates.md (const_1_to_8_operand): New predicate.
	(const_0_to_15_operand): Rename msp430_bitpos predicate.
	(const_1_to_19_operand): New predicate.
	* doc/invoke.texi: Document -mmax-inline-shift=.

2020-08-26  Aldy Hernandez  <aldyh@redhat.com>

	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Abstract code out to...
	* tree-vrp.c (find_case_label_range): ...here.  Rewrite for to use irange
	API.
	(simplify_stmt_for_jump_threading): Call find_case_label_range instead of
	duplicating the code in simplify_stmt_for_jump_threading.
	* tree-vrp.h (find_case_label_range): New prototype.

2020-08-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96698
	* tree-vectorizer.h (loop_vec_info::reduc_latch_defs): New.
	(loop_vec_info::reduc_latch_slp_defs): Likewise.
	* tree-vect-stmts.c (vect_transform_stmt): Only record
	stmts to update PHI latches from, perform the update ...
	* tree-vect-loop.c (vect_transform_loop): ... here after
	vectorizing those PHIs.
	(info_for_reduction): Properly handle non-reduction PHIs.

2020-08-26  Martin Liska  <mliska@suse.cz>

	* cgraphunit.c (process_symver_attribute): Match only symver
	TREE_PURPOSE.

2020-08-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96783
	* tree-vect-stmts.c (get_group_load_store_type): Use
	VMAT_ELEMENTWISE for negative strides when we cannot
	use VMAT_STRIDED_SLP.

2020-08-26  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document how are pie and pic options merged.

2020-08-26  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
	for add/sub arithmetic intrinsics.

2020-08-26  Jakub Jelinek  <jakub@redhat.com>

	PR debug/96729
	* dwarf2out.c (dwarf2out_next_real_insn): Adjust function comment.
	(dwarf2out_var_location): Look for next_note only if next_real is
	non-NULL, in that case look for the first non-deleted
	NOTE_INSN_VAR_LOCATION between loc_note and next_real, if any.

2020-08-26  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config/tilepro/gen-mul-tables.cc (main): Define IN_TARGET_CODE to 1
	in the target file.

2020-08-26  Martin Liska  <mliska@suse.cz>

	* cgraphunit.c (process_symver_attribute): Allow multiple
	symver attributes for one symbol.
	* doc/extend.texi: Document the change.

2020-08-25  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95863
	* config/i386/i386.h (CTZ_DEFINED_VALUE_AT_ZERO): Return 0/2.
	(CLZ_DEFINED_VALUE_AT_ZERO): Likewise.

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

	PR middle-end/87256
	* config/pa/pa.c (hppa_rtx_costs_shadd_p): New helper function
	to check for coefficients supported by shNadd and shladd,l.
	(hppa_rtx_costs):  Rewrite to avoid using estimates based upon
	FACTOR and enable recursing deeper into RTL expressions.

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

	* config/pa/pa.md (ashldi3): Additionally, on !TARGET_64BIT
	generate a two instruction shd/zdep sequence when shifting
	registers by suitable constants.
	(shd_internal): New define_expand to provide gen_shd_internal.

2020-08-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Rename
	__ARM_FEATURE_SVE_VECTOR_OPERATIONS to
	__ARM_FEATURE_SVE_VECTOR_OPERATORS.

2020-08-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.cc (add_sve_type_attribute):
	Take the ACLE name of the type as a parameter and add it as fourth
	argument to the "SVE type" attribute.
	(register_builtin_types): Update call accordingly.
	(register_tuple_type): Likewise.  Construct the name of the type
	earlier in order to do this.
	(get_arm_sve_vector_bits_attributes): New function.
	(handle_arm_sve_vector_bits_attribute): Report a more sensible
	error message if the attribute is applied to an SVE tuple type.
	Don't allow the attribute to be applied to an existing fixed-length
	SVE type.  Mangle the new type as __SVE_VLS<type, vector-bits>.
	Add a dummy TYPE_DECL to the new type.

2020-08-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.cc (DEF_SVE_TYPE): Add a
	leading "u" to each mangled name.

2020-08-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96548
	PR tree-optimization/96760
	* tree-ssa-loop-im.c (tree_ssa_lim): Recompute RPO after
	store-motion.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96722
	* gimple.c (infer_nonnull_range): Formatting fix.
	(infer_nonnull_range_by_dereference): Return false for clobber stmts.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96758
	* tree-ssa-strlen.c (handle_builtin_string_cmp): If both cstlen1
	and cstlen2 are set, set cmpsiz to their minimum, otherwise use the
	one that is set.  If bound is used and smaller than cmpsiz, set cmpsiz
	to bound.  If both cstlen1 and cstlen2 are set, perform the optimization.

2020-08-25  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/96730
	* tree-sra.c (create_access): Disqualify any aggregate with negative
	offset access.
	(build_ref_for_model): Add assert that offset is non-negative.

2020-08-25  Wei Wentao  <weiwt.fnst@cn.fujitsu.com>

	* rtl.def: Fix typo in comment.

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

	PR tree-optimization/21137
	* fold-const.c (fold_binary_loc) [NE_EXPR/EQ_EXPR]: Call
	STRIP_NOPS when checking whether to simplify ((x>>C1)&C2) != 0.

2020-08-25  Andrew Pinski  <apinski@marvell.com>

	PR middle-end/64242
	* config/mips/mips.md (builtin_longjmp): Restore the frame
	pointer and stack pointer and gp.

2020-08-25  Richard Biener  <rguenther@suse.de>

	PR debug/96690
	* dwarf2out.c (reference_to_unused): Make FUNCTION_DECL
	processing more consistent with respect to
	symtab->global_info_ready.
	(tree_add_const_value_attribute): Unconditionally call
	rtl_for_decl_init to do all mangling early but throw
	away the result if early_dwarf.

2020-08-25  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/96755
	* config/i386/sse.md: Correct the mode of NOT operands to
	SImode.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96715
	* match.pd (copysign(x,-x) -> -x): New simplification.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/95450
	* fold-const.c (native_interpret_real): For MODE_COMPOSITE_P modes
	punt if the to be returned REAL_CST does not encode to the bitwise
	same representation.

2020-08-24  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Configuration): Switch valgrind.com to https.

2020-08-24  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/94538
	PR target/94538
	* config/arm/thumb1.md: Disable set-constant splitter when
	TARGET_HAVE_MOVT.
	(thumb1_movsi_insn): Fix -mpure-code
	alternative.

2020-08-24  Martin Liska  <mliska@suse.cz>

	* tree-vect-data-refs.c (dr_group_sort_cmp): Work on
	data_ref_pair.
	(vect_analyze_data_ref_accesses): Work on groups.
	(vect_find_stmt_data_reference): Add group_id argument and fill
	up dataref_groups vector.
	* tree-vect-loop.c (vect_get_datarefs_in_loop): Pass new
	arguments.
	(vect_analyze_loop_2): Likewise.
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Pass argument.
	(vect_slp_bb_region): Likewise.
	(vect_slp_region): Likewise.
	(vect_slp_bb):Work on the entire BB.
	* tree-vectorizer.h (vect_analyze_data_ref_accesses): Add new
	argument.
	(vect_find_stmt_data_reference): Likewise.

2020-08-24  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96597
	* tree-ssa-sccvn.c (vn_reference_lookup_call): Add missing
	initialization of ::punned.
	(vn_reference_insert): Use consistently false instead of 0.
	(vn_reference_insert_pieces): Likewise.

2020-08-24  Hans-Peter Nilsson  <hp@axis.com>

	PR target/93372
	* reorg.c (fill_slots_from_thread): Allow trial insns that clobber
	TARGET_FLAGS_REGNUM as delay-slot fillers.

2020-08-23  H.J. Lu  <hjl.tools@gmail.com>

	PR target/96744
	* config/i386/i386-options.c (IX86_ATTR_IX86_YES): New.
	(IX86_ATTR_IX86_NO): Likewise.
	(ix86_opt_type): Add ix86_opt_ix86_yes and ix86_opt_ix86_no.
	(ix86_valid_target_attribute_inner_p): Handle general-regs-only,
	ix86_opt_ix86_yes and ix86_opt_ix86_no.
	(ix86_option_override_internal): Check opts->x_ix86_target_flags
	instead of opts->x_ix86_target_flags.
	* doc/extend.texi: Document target("general-regs-only") function
	attribute.

2020-08-21  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/extend.texi: Update links to Arm docs.
	* doc/invoke.texi: Likewise.

2020-08-21  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/96262
	* config/i386/i386-expand.c
	(ix86_expand_vec_shift_qihi_constant): Refine.

2020-08-21  Alex Coplan  <alex.coplan@arm.com>

	PR jit/63854
	* gcc.c (set_static_spec): New.
	(set_static_spec_owned): New.
	(set_static_spec_shared): New.
	(driver::maybe_putenv_COLLECT_LTO_WRAPPER): Use
	set_static_spec_owned() to take ownership of lto_wrapper_file
	such that it gets freed in driver::finalize.
	(driver::maybe_run_linker): Use set_static_spec_shared() to
	ensure that we don't try and free() the static string "ld",
	also ensuring that any previously-allocated string in
	linker_name_spec is freed. Likewise with argv0.
	(driver::finalize): Use set_static_spec_shared() when resetting
	specs that previously had allocated strings; remove if(0)
	around call to free().

2020-08-21  Senthil Kumar Selvaraj  <saaadhu@gcc.gnu.org>

	* emit-rtl.c (try_split): Call copy_frame_info_to_split_insn
	to split certain RTX_FRAME_RELATED_P insns.
	* recog.c (copy_frame_info_to_split_insn): New function.
	(peep2_attempt): Split copying of frame related info of
	RTX_FRAME_RELATED_P insns into above function and call it.
	* recog.h (copy_frame_info_to_split_insn): Declare it.

2020-08-21  liuhongt  <hongtao.liu@intel.com>

	PR target/88808
	* config/i386/i386.c (ix86_preferred_reload_class): Allow
	QImode data go into mask registers.
	* config/i386/i386.md: (*movhi_internal): Adjust constraints
	for mask registers.
	(*movqi_internal): Ditto.
	(*anddi_1): Support mask register operations
	(*and<mode>_1): Ditto.
	(*andqi_1): Ditto.
	(*andn<mode>_1): Ditto.
	(*<code><mode>_1): Ditto.
	(*<code>qi_1): Ditto.
	(*one_cmpl<mode>2_1): Ditto.
	(*one_cmplsi2_1_zext): Ditto.
	(*one_cmplqi2_1): Ditto.
	(define_peephole2): Move constant 0/-1 directly into mask
	registers.
	* config/i386/predicates.md (mask_reg_operand): New predicate.
	* config/i386/sse.md (define_split): Add post-reload splitters
	that would convert "generic" patterns to mask patterns.
	(*knotsi_1_zext): New define_insn.

2020-08-21  liuhongt  <hongtao.liu@intel.com>

	* config/i386/x86-tune-costs.h (skylake_cost): Adjust cost
	model.

2020-08-21  liuhongt  <hongtao.liu@intel.com>

	* config/i386/i386.c (inline_secondary_memory_needed):
	No memory is needed between mask regs and gpr.
	(ix86_hard_regno_mode_ok): Add condition TARGET_AVX512F for
	mask regno.
	* config/i386/i386.h (enum reg_class): Add INT_MASK_REGS.
	(REG_CLASS_NAMES): Ditto.
	(REG_CLASS_CONTENTS): Ditto.
	* config/i386/i386.md: Exclude mask register in
	define_peephole2 which is avaiable only for gpr.

2020-08-21  H.J. Lu  <hjl.tools@gmail.com>

	PR target/71453
	* config/i386/i386.h (struct processor_costs): Add member
	mask_to_integer, integer_to_mask, mask_load[3], mask_store[3],
	mask_move.
	* config/i386/x86-tune-costs.h (ix86_size_cost, i386_cost,
	i386_cost, pentium_cost, lakemont_cost, pentiumpro_cost,
	geode_cost, k6_cost, athlon_cost, k8_cost, amdfam10_cost,
	bdver_cost, znver1_cost, znver2_cost, skylake_cost,
	btver1_cost, btver2_cost, pentium4_cost, nocona_cost,
	atom_cost, slm_cost, intel_cost, generic_cost, core_cost):
	Initialize mask_load[3], mask_store[3], mask_move,
	integer_to_mask, mask_to_integer for all target costs.
	* config/i386/i386.c (ix86_register_move_cost): Using cost
	model of mask registers.
	(inline_memory_move_cost): Ditto.
	(ix86_register_move_cost): Ditto.

2020-08-20  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config/vxworks.h (VXWORKS_ADDITIONAL_CPP_SPEC): Don't include
	VxWorks header files if -fself-test is used.
	(STARTFILE_PREFIX_SPEC): Avoid using VSB_DIR if -fself-test is used.

2020-08-20  Joe Ramsay  <Joe.Ramsay@arm.com>

	PR target/96683
	* config/arm/mve.md (mve_vst1q_f<mode>): Require MVE memory operand for
	destination.
	(mve_vst1q_<supf><mode>): Likewise.

2020-08-19  2020-08-19  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_P10V_0, BU_P10V_1,
	BU_P10V_2, BU_P10V_3): Rename BU_P10V_VSX_0, BU_P10V_VSX_1,
	BU_P10V_VSX_2, BU_P10V_VSX_3 respectively.
	(BU_P10V_4): Remove.
	(BU_P10V_AV_0, BU_P10V_AV_1, BU_P10V_AV_2, BU_P10V_AV_3, BU_P10V_AV_4):
	New definitions for Power 10 Altivec macros.
	(VSTRIBR, VSTRIHR, VSTRIBL, VSTRIHL, VSTRIBR_P, VSTRIHR_P,
	VSTRIBL_P, VSTRIHL_P, MTVSRBM, MTVSRHM, MTVSRWM, MTVSRDM, MTVSRQM,
	VEXPANDMB, VEXPANDMH, VEXPANDMW, VEXPANDMD, VEXPANDMQ, VEXTRACTMB,
	VEXTRACTMH, VEXTRACTMW, VEXTRACTMD, VEXTRACTMQ): Replace macro
	expansion BU_P10V_1 with BU_P10V_AV_1.
	(VCLRLB, VCLRRB, VCFUGED, VCLZDM, VCTZDM, VPDEPD, VPEXTD, VGNB,
	VCNTMBB, VCNTMBH, VCNTMBW, VCNTMBD): Replace macro expansion
	BU_P10V_2 with	BU_P10V_AV_2.
	(VEXTRACTBL, VEXTRACTHL, VEXTRACTWL, VEXTRACTDL, VEXTRACTBR, VEXTRACTHR,
	VEXTRACTWR, VEXTRACTDR, VINSERTGPRBL, VINSERTGPRHL, VINSERTGPRWL,
	VINSERTGPRDL, VINSERTVPRBL, VINSERTVPRHL, VINSERTVPRWL, VINSERTGPRBR,
	VINSERTGPRHR, VINSERTGPRWR, VINSERTGPRDR, VINSERTVPRBR, VINSERTVPRHR,
	VINSERTVPRWR, VREPLACE_ELT_V4SI, VREPLACE_ELT_UV4SI, VREPLACE_ELT_V2DF,
	VREPLACE_ELT_V4SF, VREPLACE_ELT_V2DI, VREPLACE_ELT_UV2DI, VREPLACE_UN_V4SI,
	VREPLACE_UN_UV4SI, VREPLACE_UN_V4SF, VREPLACE_UN_V2DI, VREPLACE_UN_UV2DI,
	VREPLACE_UN_V2DF, VSLDB_V16QI, VSLDB_V8HI, VSLDB_V4SI, VSLDB_V2DI,
	VSRDB_V16QI, VSRDB_V8HI, VSRDB_V4SI, VSRDB_V2DI): Replace macro expansion
	BU_P10V_3 with BU_P10V_AV_3.
	(VXXSPLTIW_V4SI, VXXSPLTIW_V4SF, VXXSPLTID): Replace macro expansion
	BU_P10V_1 with BU_P10V_AV_1.
	(XXGENPCVM_V16QI, XXGENPCVM_V8HI, XXGENPCVM_V4SI, XXGENPCVM_V2DI):
	Replace macro expansion BU_P10V_2 with BU_P10V_VSX_2.
	(VXXSPLTI32DX_V4SI, VXXSPLTI32DX_V4SF, VXXBLEND_V16QI, VXXBLEND_V8HI,
	VXXBLEND_V4SI, VXXBLEND_V2DI, VXXBLEND_V4SF, VXXBLEND_V2DF): Replace macor
	expansion BU_P10V_3 with BU_P10V_VSX_3.
	(XXEVAL, VXXPERMX): Replace macro expansion BU_P10V_4 with BU_P10V_VSX_4.
	(XVCVBF16SP, XVCVSPBF16): Replace macro expansion BU_VSX_1 with
	BU_P10V_VSX_1. Also change MISC to CONST.
	* config/rs6000/rs6000-c.c: (P10_BUILTIN_VXXPERMX): Replace with
	P10V_BUILTIN_VXXPERMX.
	(P10_BUILTIN_VCLRLB, P10_BUILTIN_VCLRLB, P10_BUILTIN_VCLRRB,
	P10_BUILTIN_VGNB, P10_BUILTIN_XXEVAL, P10_BUILTIN_VXXPERMX,
	P10_BUILTIN_VEXTRACTBL, P10_BUILTIN_VEXTRACTHL, P10_BUILTIN_VEXTRACTWL,
	P10_BUILTIN_VEXTRACTDL, P10_BUILTIN_VINSERTGPRHL,
	P10_BUILTIN_VINSERTGPRWL, P10_BUILTIN_VINSERTGPRDL,
	P10_BUILTIN_VINSERTVPRBL, P10_BUILTIN_VINSERTVPRHL,
	P10_BUILTIN_VEXTRACTBR, P10_BUILTIN_VEXTRACTHR,
	P10_BUILTIN_VEXTRACTWR, P10_BUILTIN_VEXTRACTDR,
	P10_BUILTIN_VINSERTGPRBR, P10_BUILTIN_VINSERTGPRHR,
	P10_BUILTIN_VINSERTGPRWR, P10_BUILTIN_VINSERTGPRDR,
	P10_BUILTIN_VINSERTVPRBR, P10_BUILTIN_VINSERTVPRHR,
	P10_BUILTIN_VINSERTVPRWR, P10_BUILTIN_VREPLACE_ELT_UV4SI,
	P10_BUILTIN_VREPLACE_ELT_V4SI, P10_BUILTIN_VREPLACE_ELT_UV2DI,
	P10_BUILTIN_VREPLACE_ELT_V2DI, P10_BUILTIN_VREPLACE_ELT_V2DF,
	P10_BUILTIN_VREPLACE_UN_UV4SI, P10_BUILTIN_VREPLACE_UN_V4SI,
	P10_BUILTIN_VREPLACE_UN_V4SF, P10_BUILTIN_VREPLACE_UN_UV2DI,
	P10_BUILTIN_VREPLACE_UN_V2DI, P10_BUILTIN_VREPLACE_UN_V2DF,
	P10_BUILTIN_VSLDB_V16QI, P10_BUILTIN_VSLDB_V16QI,
	P10_BUILTIN_VSLDB_V8HI, P10_BUILTIN_VSLDB_V4SI,
	P10_BUILTIN_VSLDB_V2DI, P10_BUILTIN_VXXSPLTIW_V4SI,
	P10_BUILTIN_VXXSPLTIW_V4SF, P10_BUILTIN_VXXSPLTID,
	P10_BUILTIN_VXXSPLTI32DX_V4SI, P10_BUILTIN_VXXSPLTI32DX_V4SF,
	P10_BUILTIN_VXXBLEND_V16QI, P10_BUILTIN_VXXBLEND_V8HI,
	P10_BUILTIN_VXXBLEND_V4SI, P10_BUILTIN_VXXBLEND_V2DI,
	P10_BUILTIN_VXXBLEND_V4SF, P10_BUILTIN_VXXBLEND_V2DF,
	P10_BUILTIN_VSRDB_V16QI, P10_BUILTIN_VSRDB_V8HI,
	P10_BUILTIN_VSRDB_V4SI, P10_BUILTIN_VSRDB_V2DI,
	P10_BUILTIN_VSTRIBL, P10_BUILTIN_VSTRIHL,
	P10_BUILTIN_VSTRIBL_P, P10_BUILTIN_VSTRIHL_P,
	P10_BUILTIN_VSTRIBR, P10_BUILTIN_VSTRIHR,
	P10_BUILTIN_VSTRIBR_P, P10_BUILTIN_VSTRIHR_P,
	P10_BUILTIN_MTVSRBM, P10_BUILTIN_MTVSRHM,
	P10_BUILTIN_MTVSRWM, P10_BUILTIN_MTVSRDM,
	P10_BUILTIN_MTVSRQM, P10_BUILTIN_VCNTMBB,
	P10_BUILTIN_VCNTMBH, P10_BUILTIN_VCNTMBW,
	P10_BUILTIN_VCNTMBD, P10_BUILTIN_VEXPANDMB,
	P10_BUILTIN_VEXPANDMH, P10_BUILTIN_VEXPANDMW,
	P10_BUILTIN_VEXPANDMD, P10_BUILTIN_VEXPANDMQ,
	P10_BUILTIN_VEXTRACTMB, P10_BUILTIN_VEXTRACTMH,
	P10_BUILTIN_VEXTRACTMW, P10_BUILTIN_VEXTRACTMD,
	P10_BUILTIN_VEXTRACTMQ, P10_BUILTIN_XVTLSBB_ZEROS,
	P10_BUILTIN_XVTLSBB_ONES): Replace with
	P10V_BUILTIN_VCLRLB, P10V_BUILTIN_VCLRLB, P10V_BUILTIN_VCLRRB,
	P10V_BUILTIN_VGNB, P10V_BUILTIN_XXEVAL, P10V_BUILTIN_VXXPERMX,
	P10V_BUILTIN_VEXTRACTBL, P10V_BUILTIN_VEXTRACTHL, P10V_BUILTIN_VEXTRACTWL,
	P10V_BUILTIN_VEXTRACTDL, P10V_BUILTIN_VINSERTGPRHL,
	P10V_BUILTIN_VINSERTGPRWL, P10V_BUILTIN_VINSERTGPRDL,
	P10V_BUILTIN_VINSERTVPRBL,P10V_BUILTIN_VINSERTVPRHL,
	P10V_BUILTIN_VEXTRACTBR, P10V_BUILTIN_VEXTRACTHR
	P10V_BUILTIN_VEXTRACTWR, P10V_BUILTIN_VEXTRACTDR,
	P10V_BUILTIN_VINSERTGPRBR, P10V_BUILTIN_VINSERTGPRHR,
	P10V_BUILTIN_VINSERTGPRWR, P10V_BUILTIN_VINSERTGPRDR,
	P10V_BUILTIN_VINSERTVPRBR, P10V_BUILTIN_VINSERTVPRHR,
	P10V_BUILTIN_VINSERTVPRWR, P10V_BUILTIN_VREPLACE_ELT_UV4SI,
	P10V_BUILTIN_VREPLACE_ELT_V4SI, P10V_BUILTIN_VREPLACE_ELT_UV2DI,
	P10V_BUILTIN_VREPLACE_ELT_V2DI, P10V_BUILTIN_VREPLACE_ELT_V2DF,
	P10V_BUILTIN_VREPLACE_UN_UV4SI, P10V_BUILTIN_VREPLACE_UN_V4SI,
	P10V_BUILTIN_VREPLACE_UN_V4SF, P10V_BUILTIN_VREPLACE_UN_UV2DI,
	P10V_BUILTIN_VREPLACE_UN_V2DI, P10V_BUILTIN_VREPLACE_UN_V2DF,
	P10V_BUILTIN_VSLDB_V16QI, P10V_BUILTIN_VSLDB_V16QI,
	P10V_BUILTIN_VSLDB_V8HI, P10V_BUILTIN_VSLDB_V4SI,
	P10V_BUILTIN_VSLDB_V2DI, P10V_BUILTIN_VXXSPLTIW_V4SI,
	P10V_BUILTIN_VXXSPLTIW_V4SF, P10V_BUILTIN_VXXSPLTID,
	P10V_BUILTIN_VXXSPLTI32DX_V4SI, P10V_BUILTIN_VXXSPLTI32DX_V4SF,
	P10V_BUILTIN_VXXBLEND_V16QI, P10V_BUILTIN_VXXBLEND_V8HI,
	P10V_BUILTIN_VXXBLEND_V4SI, P10V_BUILTIN_VXXBLEND_V2DI,
	P10V_BUILTIN_VXXBLEND_V4SF, P10V_BUILTIN_VXXBLEND_V2DF,
	P10V_BUILTIN_VSRDB_V16QI, P10V_BUILTIN_VSRDB_V8HI,
	P10V_BUILTIN_VSRDB_V4SI, P10V_BUILTIN_VSRDB_V2DI,
	P10V_BUILTIN_VSTRIBL, P10V_BUILTIN_VSTRIHL,
	P10V_BUILTIN_VSTRIBL_P, P10V_BUILTIN_VSTRIHL_P,
	P10V_BUILTIN_VSTRIBR, P10V_BUILTIN_VSTRIHR,
	P10V_BUILTIN_VSTRIBR_P, P10V_BUILTIN_VSTRIHR_P,
	P10V_BUILTIN_MTVSRBM, P10V_BUILTIN_MTVSRHM,
	P10V_BUILTIN_MTVSRWM, P10V_BUILTIN_MTVSRDM,
	P10V_BUILTIN_MTVSRQM, P10V_BUILTIN_VCNTMBB,
	P10V_BUILTIN_VCNTMBH, P10V_BUILTIN_VCNTMBW,
	P10V_BUILTIN_VCNTMBD, P10V_BUILTIN_VEXPANDMB,
	P10V_BUILTIN_VEXPANDMH, P10V_BUILTIN_VEXPANDMW,
	P10V_BUILTIN_VEXPANDMD, P10V_BUILTIN_VEXPANDMQ,
	P10V_BUILTIN_VEXTRACTMB, P10V_BUILTIN_VEXTRACTMH,
	P10V_BUILTIN_VEXTRACTMW, P10V_BUILTIN_VEXTRACTMD,
	P10V_BUILTIN_VEXTRACTMQ, P10V_BUILTIN_XVTLSBB_ZEROS,
	P10V_BUILTIN_XVTLSBB_ONES respectively.
	* config/rs6000/rs6000-call.c: Ditto above, change P10_BUILTIN_name to
	P10V_BUILTIN_name.
	(P10_BUILTIN_XVCVSPBF16, P10_BUILTIN_XVCVBF16SP): Change to
	P10V_BUILTIN_XVCVSPBF16, P10V_BUILTIN_XVCVBF16SP respectively.

2020-08-19  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-logue.c (rs6000_decl_ok_for_sibcall):
	Sibcalls are always legal when the caller doesn't preserve r2.

2020-08-19  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_builtin)
	[case IX86_BUILTIN_ENQCMD, case IX86_BUILTIN_ENQCMDS]:
	Rewrite expansion to use code_for_enqcmd.
	[case IX86_BUILTIN_WRSSD, case IX86_BUILTIN_WRSSQ]:
	Rewrite expansion to use code_for_wrss.
	[case IX86_BUILTIN_WRUSSD, case IX86_BUILTIN_WRUSSD]:
	Rewrite expansion to use code_for_wrss.

2020-08-19  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/94234
	* match.pd ((PTR_A + OFF) - (PTR_B + OFF)) -> (PTR_A - PTR_B): New
	simplification.

2020-08-19  H.J. Lu  <hjl.tools@gmail.com>

	* common/config/i386/cpuinfo.h (get_intel_cpu): Detect Rocket
	Lake and Alder Lake.

2020-08-19  Peixin Qiao  <qiaopeixin@huawei.com>

	* config/aarch64/aarch64.c (aarch64_init_cumulative_args): Remove
	"fndecl && TREE_PUBLIC (fndecl)" check since it prevents the funtion
	type check when calling via a function pointer or when calling a static
	function.

2020-08-19  Kewen Lin  <linkw@linux.ibm.com>

	* opts-global.c (decode_options): Call target_option_override_hook
	before it prints for --help=*.

2020-08-18  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_VSX_1): Rename xvcvbf16sp to
	xvcvbf16spn.
	* config/rs6000/rs6000-call.c (builtin_function_type): Likewise.
	* config/rs6000/vsx.md: Likewise.
	* doc/extend.texi: Likewise.

2020-08-18  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (gen_lxvl_stxvl_move):
	Helper function.
	(expand_block_move): Add lxvl/stxvl, vector pair, and
	unaligned VSX.
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Default value for -mblock-ops-vector-pair.
	* config/rs6000/rs6000.opt: Add -mblock-ops-vector-pair.

2020-08-18  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (check_for_binary_op_overflow): Change type of store
	to range_query.
	(vr_values::adjust_range_with_scev): Abstract most of the code...
	(range_of_var_in_loop): ...here.  Remove value_range_equiv uses.
	(simplify_using_ranges::simplify_using_ranges): Change type of store
	to range_query.
	* vr-values.h (class range_query): New.
	(class simplify_using_ranges): Use range_query.
	(class vr_values): Add OVERRIDE to get_value_range.
	(range_of_var_in_loop): New.

2020-08-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/96665
	PR middle-end/78257
	* expr.c (convert_to_bytes): Replace statically allocated buffer with
	a dynamically allocated one of sufficient size.

2020-08-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/96670
	PR middle-end/78257
	* gimple-fold.c (gimple_fold_builtin_memchr): Call byte_representation
	to get it, not string_constant.

2020-08-18  Hu Jiangping  <hujiangping@cn.fujitsu.com>

	* doc/gimple.texi (gimple_debug_begin_stmt_p): Add return type.
	(gimple_debug_inline_entry_p, gimple_debug_nonbind_marker_p): Likewise.

2020-08-18  Martin Sebor  <msebor@redhat.com>

	* fold-const.c (native_encode_expr): Update comment.

2020-08-18  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96536
	* config/i386/i386.md (restore_stack_nonlocal): Add missing compare
	RTX.  Rewrite expander to use high-level functions in RTL construction.

2020-08-18  liuhongt  <hongtao.liu@intel.com>

	PR target/96562
	PR target/93897
	* config/i386/i386-expand.c (ix86_expand_pinsr): Don't use
	pinsr for TImode.
	(ix86_expand_pextr): Don't use pextr for TImode.

2020-08-17  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-builtin.def (__builtin_ia32_bextri_u32)
	(__builtin_ia32_bextri_u64): Use CODE_FOR_nothing.
	* config/i386/i386.md (@tbm_bextri_<mode>):
	Implement as parametrized name pattern.
	(@rdrand<mode>): Ditto.
	(@rdseed<mode>): Ditto.
	* config/i386/i386-expand.c (ix86_expand_builtin)
	[case IX86_BUILTIN_BEXTRI32, case IX86_BUILTIN_BEXTRI64]:
	Update for parameterized name patterns.
	[case IX86_BUILTIN_RDRAND16_STEP, case IX86_BUILTIN_RDRAND32_STEP]
	[case IX86_BUILTIN_RDRAND64_STEP]: Ditto.
	[case IX86_BUILTIN_RDSEED16_STEP, case IX86_BUILTIN_RDSEED32_STEP]
	[case IX86_BUILTIN_RDSEED64_STEP]: Ditto.

2020-08-17  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (vr_values::get_value_range): Add stmt param.
	(vr_values::extract_range_from_comparison): Same.
	(vr_values::extract_range_from_assignment): Pass stmt to
	extract_range_from_comparison.
	(vr_values::adjust_range_with_scev): Pass stmt to get_value_range.
	(simplify_using_ranges::vrp_evaluate_conditional): Add stmt param.
	Pass stmt to get_value_range.
	(simplify_using_ranges::vrp_visit_cond_stmt): Pass stmt to
	get_value_range.
	(simplify_using_ranges::simplify_abs_using_ranges): Same.
	(simplify_using_ranges::simplify_div_or_mod_using_ranges): Same.
	(simplify_using_ranges::simplify_bit_ops_using_ranges): Same.
	(simplify_using_ranges::simplify_cond_using_ranges_1): Same.
	(simplify_using_ranges::simplify_switch_using_ranges): Same.
	(simplify_using_ranges::simplify_float_conversion_using_ranges): Same.
	* vr-values.h (class vr_values): Add stmt arg to
	vrp_evaluate_conditional_warnv_with_ops.
	Add stmt arg to extract_range_from_comparison and get_value_range.
	(simplify_using_ranges::get_value_range): Add stmt arg.

2020-08-17  liuhongt  <hongtao.liu@intel.com>

	PR target/96350
	* config/i386/i386.c (ix86_legitimate_constant_p): Return
	false for ENDBR immediate.
	(ix86_legitimate_address_p): Ditto.
	* config/i386/predicates.md
	(x86_64_immediate_operand): Exclude ENDBR immediate.
	(x86_64_zext_immediate_operand): Ditto.
	(x86_64_dwzext_immediate_operand): Ditto.
	(ix86_endbr_immediate_operand): New predicate.

2020-08-16  Roger Sayle  <roger@nextmovesoftware.com>

	* simplify-rtx.c (simplify_unary_operation_1) [SIGN_EXTEND]:
	Simplify (sign_extend:M (truncate:N (lshiftrt:M x C))) to
	(ashiftrt:M x C) when the shift sets the high bits appropriately.

2020-08-14  Martin Sebor  <msebor@redhat.com>

	PR middle-end/78257
	* builtins.c (expand_builtin_memory_copy_args): Rename called function.
	(expand_builtin_stpcpy_1): Remove argument from call.
	(expand_builtin_memcmp): Rename called function.
	(inline_expand_builtin_bytecmp): Same.
	* expr.c (convert_to_bytes): New function.
	(constant_byte_string): New function (formerly string_constant).
	(string_constant): Call constant_byte_string.
	(byte_representation): New function.
	* expr.h (byte_representation): Declare.
	* fold-const-call.c (fold_const_call): Rename called function.
	* fold-const.c (c_getstr): Remove an argument.
	(getbyterep): Define a new function.
	* fold-const.h (c_getstr): Remove an argument.
	(getbyterep): Declare a new function.
	* gimple-fold.c (gimple_fold_builtin_memory_op): Rename callee.
	(gimple_fold_builtin_string_compare): Same.
	(gimple_fold_builtin_memchr): Same.

2020-08-14  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Overview): Add tip about how to get a
	gimple dump if the analyzer ICEs.

2020-08-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-builtin.def (__builtin_ia32_llwpcb)
	(__builtin_ia32_slwpcb, __builtin_ia32_lwpval32)
	(__builtin_ia32_lwpval64, __builtin_ia32_lwpins32)
	(__builtin_ia32_lwpins64): Use CODE_FOR_nothing.
	* config/i386/i386.md (@lwp_llwpcb<mode>):
	Implement as parametrized name pattern.
	(@lwp_slwpcb<mode>): Ditto.
	(@lwp_lwpval<mode>): Ditto.
	(@lwp_lwpins<mode>): Ditto.
	* config/i386/i386-expand.c (ix86_expand_special_args_builtin)
	[case VOID_FTYPE_UINT_UINT_UINT, case VOID_FTYPE_UINT64_UINT_UINT]
	[case UCHAR_FTYPE_UINT_UINT_UINT, case UCHAR_FTYPE_UINT64_UINT_UINT]:
	Remove.
	(ix86_expand_builtin)
	[ case IX86_BUILTIN_LLWPCB, case IX86_BUILTIN_LLWPCB]:
	Update for parameterized name patterns.
	[case IX86_BUILTIN_LWPVAL32, case IX86_BUILTIN_LWPVAL64]
	[case IX86_BUILTIN_LWPINS32, case IX86_BUILTIN_LWPINS64]: Expand here.

2020-08-14  Lewis Hyatt  <lhyatt@gmail.com>

	* common.opt: Add new option -fdiagnostics-plain-output.
	* doc/invoke.texi: Document it.
	* opts-common.c (decode_cmdline_options_to_array): Implement it.
	(decode_cmdline_option): Add missing const qualifier to argv.

2020-08-14  Jakub Jelinek  <jakub@redhat.com>
	    Jonathan Wakely  <jwakely@redhat.com>
	    Jonathan Wakely   <jwakely@redhat.com>

	* system.h: Include type_traits.
	* vec.h (vec<T, A, vl_embed>::embedded_size): Use offsetof and asserts
	on vec_stdlayout, which is conditionally a vec (for standard layout T)
	and otherwise vec_embedded.

2020-08-14  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/csky-elf.h (ASM_SPEC): Use mfloat-abi.
	* config/csky/csky-linux-elf.h (ASM_SPEC): mfloat-abi.

2020-08-13  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93032
	PR analyzer/93938
	PR analyzer/94011
	PR analyzer/94099
	PR analyzer/94399
	PR analyzer/94458
	PR analyzer/94503
	PR analyzer/94640
	PR analyzer/94688
	PR analyzer/94689
	PR analyzer/94839
	PR analyzer/95026
	PR analyzer/95042
	PR analyzer/95240
	* Makefile.in (ANALYZER_OBJS): Add analyzer/region.o,
	analyzer/region-model-impl-calls.o,
	analyzer/region-model-manager.o,
	analyzer/region-model-reachability.o, analyzer/store.o, and
	analyzer/svalue.o.
	* doc/analyzer.texi: Update for changes to analyzer
	implementation.
	* tristate.h (tristate::get_value): New accessor.

2020-08-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-builtin.def (CET_NORMAL): Merge to CET BDESC array.
	(__builtin_ia32_rddspd, __builtin_ia32_rddspq, __builtin_ia32_incsspd)
	(__builtin_ia32_incsspq, __builtin_ia32_wrssd, __builtin_ia32_wrssq)
	(__builtin_ia32_wrussd, __builtin_ia32_wrussq): Use CODE_FOR_nothing.
	* config/i386/i386-builtins.c: Remove handling of CET_NORMAL builtins.
	* config/i386/i386.md (@rdssp<mode>): Implement as parametrized
	name pattern.  Use SWI48 mode iterator.  Introduce input operand
	and remove explicit XOR zeroing from insn template.
	(@incssp<mode>): Implement as parametrized name pattern.
	Use SWI48 mode iterator.
	(@wrss<mode>): Ditto.
	(@wruss<mode>): Ditto.
	(rstorssp): Remove expander.  Rename insn pattern from *rstorssp<mode>.
	Use DImode memory operand.
	(clrssbsy): Remove expander.  Rename insn pattern from *clrssbsy<mode>.
	Use DImode memory operand.
	(save_stack_nonlocal): Update for parametrized name patterns.
	Use cleared register as an argument to gen_rddsp.
	(restore_stack_nonlocal): Update for parametrized name patterns.
	* config/i386/i386-expand.c (ix86_expand_builtin):
	[case IX86_BUILTIN_RDSSPD, case IX86_BUILTIN_RDSSPQ]: Expand here.
	[case IX86_BUILTIN_INCSSPD, case IX86_BUILTIN_INCSSPQ]: Ditto.
	[case IX86_BUILTIN_RSTORSSP, case IX86_BUILTIN_CLRSSBSY]:
	Generate DImode memory operand.
	[case IX86_BUILTIN_WRSSD, case IX86_BUILTIN_WRSSQ]
	[case IX86_BUILTIN_WRUSSD, case IX86_BUILTIN_WRUSSD]:
	Update for parameterized name patterns.

2020-08-13  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96506
	* config/rs6000/rs6000-call.c (rs6000_promote_function_mode): Disallow
	MMA types as return values.
	(rs6000_function_arg): Disallow MMA types as function arguments.

2020-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	Revert:
	2020-08-12  Peixin Qiao  <qiaopeixin@huawei.com>

	* config/aarch64/aarch64.c (aarch64_function_value): Add if
	condition to check ag_mode after entering if condition of
	aarch64_vfp_is_call_or_return_candidate. If TARGET_FLOAT is
	set as false by -mgeneral-regs-only, report the diagnostic
	information of -mgeneral-regs-only imcompatible with the use
	of fp/simd register(s).

2020-08-13  Martin Liska  <mliska@suse.cz>

	PR ipa/96482
	* ipa-cp.c (ipcp_bits_lattice::meet_with_1): Mask m_value
	with m_mask.

2020-08-13  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_omp_taskloop_expr): New function.
	(gimplify_omp_for): Use it.  For OMP_FOR_NON_RECTANGULAR
	loops adjust in outer taskloop the var-outer decls.
	* omp-expand.c (expand_omp_taskloop_for_inner): Handle non-rectangular
	loops.
	(expand_omp_for): Don't reject non-rectangular taskloop.
	* omp-general.c (omp_extract_for_data): Don't assert that
	non-rectangular loops have static schedule, instead treat loop->m1
	or loop->m2 as if loop->n1 or loop->n2 is non-constant.

2020-08-13  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/96246
	* config/i386/sse.md (<avx512>_load<mode>_mask,
	<avx512>_load<mode>_mask): Extend to generate blendm
	instructions.
	(<avx512>_blendm<mode>, <avx512>_blendm<mode>): Change
	define_insn to define_expand.

2020-08-12  Roger Sayle  <roger@nextmovesoftware.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96558
	* config/i386/i386.md (peephole2): Only reorder register clearing
	instructions to allow use of xor for general registers.

2020-08-12  Martin Liska  <mliska@suse.cz>

	PR ipa/96482
	* ipa-cp.c (ipcp_bits_lattice::meet_with_1): Drop value bits
	for bits that are unknown.
	(ipcp_bits_lattice::set_to_constant): Likewise.
	* tree-ssa-ccp.c (get_default_value): Add sanity check that
	IPA CP bit info has all bits set to zero in bits that
	are unknown.

2020-08-12  Peixin Qiao  <qiaopeixin@huawei.com>

	* config/aarch64/aarch64.c (aarch64_function_value): Add if
	condition to check ag_mode after entering if condition of
	aarch64_vfp_is_call_or_return_candidate. If TARGET_FLOAT is
	set as false by -mgeneral-regs-only, report the diagnostic
	information of -mgeneral-regs-only imcompatible with the use
	of fp/simd register(s).

2020-08-12  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96535
	* toplev.c (process_options): Move flag_unroll_loops and
	flag_cunroll_grow_size handling from here to ...
	* opts.c (finish_options): ... here.  For flag_cunroll_grow_size,
	don't check for AUTODETECT_VALUE, but instead check
	opts_set->x_flag_cunroll_grow_size.
	* common.opt (funroll-completely-grow-size): Default to 0.
	* config/rs6000/rs6000.c (TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE):
	Redefine.
	(rs6000_override_options_after_change): New function.
	(rs6000_option_override_internal): Call it.  Move there the
	flag_cunroll_grow_size, unroll_only_small_loops and
	flag_rename_registers handling.

2020-08-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Make elt_size an
	unsigned HOST_WIDE_INT.  Print init_frag.remaining using
	HOST_WIDE_INT_PRINT_UNSIGNED.

2020-08-12  Roger Sayle  <roger@nextmovesoftware.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (peephole2): Reduce unnecessary
	register shuffling produced by register allocation.

2020-08-12  Aldy Hernandez  <aldyh@redhat.com>

	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Use vec<>
	instead of std::vector<>.
	(evaluate_properties_for_edge): Same.
	(ipa_fn_summary_t::duplicate): Same.
	(estimate_ipcp_clone_size_and_time): Same.
	* vec.h (<T, A, vl_embed>::embedded_size): Change vec_embedded
	type to contain a char[].

2020-08-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/96308
	* config/s390/s390.c (s390_cannot_force_const_mem): Reject an
	unary minus for everything not being a numeric constant.
	(legitimize_tls_address): Move a NEG out of the CONST rtx.

2020-08-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/96456
	* config/s390/s390.h (TARGET_NONSIGNALING_VECTOR_COMPARE_OK): New
	macro.
	* config/s390/vector.md (vcond_comparison_operator): Use new macro
	for the check.

2020-08-11  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/96539
	* expr.c (emit_block_move_hints): Don't copy anything if x and y
	are the same and neither is MEM_VOLATILE_P.

2020-08-11  Jakub Jelinek  <jakub@redhat.com>

	PR c/96549
	* tree.c (get_narrower): Use TREE_TYPE (ret) instead of
	TREE_TYPE (win) for COMPOUND_EXPRs.

2020-08-11  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (not_loop_guard_equal_edge_p): New function.
	(maybe_predict_edge): New function.
	(predict_paths_for_bb): Use it.
	(predict_paths_leading_to_edge): Use it.

2020-08-11  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (DEBUG_COUNTER): Add ipa_cp_bits.
	* ipa-cp.c (ipcp_store_bits_results): Use it when we store known
	bits for parameters.

2020-08-10  Marek Polacek  <polacek@redhat.com>

	* doc/sourcebuild.texi: Document dg-ice.

2020-08-10  Roger Sayle  <roger@nextmovesoftware.com>

	* config/i386/i386-expand.c (ix86_expand_int_movcc): Expand
	signed MIN_EXPR against zero as "x < 0 ? x : 0" instead of
	"x <= 0 ? x : 0" to enable sign_bit_compare_p optimizations.

2020-08-10  Aldy Hernandez  <aldyh@redhat.com>

	* value-range.h (gt_ggc_mx): Declare inline.
	(gt_pch_nx): Same.

2020-08-10  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/95433
	* match.pd (X * C1 == C2): Handle wrapping overflow.
	* expr.c (maybe_optimize_mod_cmp): Qualify call to mod_inv.
	(mod_inv): Move...
	* wide-int.cc (mod_inv): ... here.
	* wide-int.h (mod_inv): Declare it.

2020-08-10  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (filter_predictions): Document semantics of filter.
	(equal_edge_p): Rename to ...
	(not_equal_edge_p): ... this; reverse semantics.
	(remove_predictions_associated_with_edge): Fix.

2020-08-10  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/96243
	* config/i386/i386-expand.c (ix86_expand_sse_cmp): Refine for
	maskcmp.
	(ix86_expand_mask_vec_cmp): Change prototype.
	* config/i386/i386-protos.h (ix86_expand_mask_vec_cmp): Change prototype.
	* config/i386/i386.c (ix86_print_operand): Remove operand
	modifier 'I'.
	* config/i386/sse.md
	(*<avx512>_cmp<mode>3<mask_scalar_merge_name><round_saeonly_name>): Deleted.
	(*<avx512>_cmp<mode>3<mask_scalar_merge_name>): Ditto.
	(*<avx512>_ucmp<mode>3<mask_scalar_merge_name>): Ditto.
	(*<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	avx512f_maskcmp<mode>3): Ditto.

2020-08-09  Roger Sayle  <roger@nextmovesoftware.com>

	* expmed.c (init_expmed_one_conv): Restore all->reg's mode.
	(init_expmed_one_mode): Set all->reg to desired mode.

2020-08-08  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96530
	* config/rs6000/rs6000.c (rs6000_invalid_conversion): Use canonical
	types for type comparisons.  Refactor code to simplify it.

2020-08-08  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/93553
	* tree-nested.c (convert_nonlocal_omp_clauses): For
	OMP_CLAUSE_REDUCTION, OMP_CLAUSE_LASTPRIVATE and OMP_CLAUSE_LINEAR
	save info->new_local_var_chain around walks of the clause gimple
	sequences and declare_vars if needed into the sequence.

2020-08-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96424
	* omp-expand.c: Include tree-eh.h.
	(expand_omp_for_init_vars): Handle -fexceptions -fnon-call-exceptions
	by forcing floating point comparison into a bool temporary.

2020-08-07  Marc Glisse  <marc.glisse@inria.fr>

	* generic-match-head.c (optimize_vectors_before_lowering_p): New
	function.
	* gimple-match-head.c (optimize_vectors_before_lowering_p):
	Likewise.
	* match.pd ((v ? w : 0) ? a : b, c1 ? c2 ? a : b : b): Use it.

2020-08-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96514
	* tree-if-conv.c (if_convertible_bb_p): If the last stmt
	is a call that is control-altering, fail.

2020-08-07  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.md: Remove trailing whitespaces.
	* config/bpf/constraints.md: Likewise.
	* config/bpf/predicates.md: Likewise.

2020-08-07  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.md (bswaphi2_reg): Add ISA 3.1 support.
	(bswapsi2_reg): Add ISA 3.1 support.
	(bswapdi2): Rename bswapdi2_xxbrd to bswapdi2_brd.
	(bswapdi2_brd,bswapdi2_xxbrd): Rename.  Add ISA 3.1 support.

2020-08-07  Alan Modra  <amodra@gmail.com>

	PR target/96493
	* config/rs6000/predicates.md (current_file_function_operand): Don't
	accept functions that differ in r2 usage.

2020-08-06  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.md (MM): New mode_iterator.
	("mov<mode>"): New expander to expand for all MM-modes.
	("*movqi_expanded", "*movhi_expanded", "*movsi_expanded")
	("*movsf_expanded", "*movdf_expanded"): Rename from the
	corresponding mov<M> named pattern.  Add to the condition that
	either operand must be a register_operand.
	("*movdi_expanded"): Similar, but also allow STCO in the condition.

2020-08-06  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/96191
	* config/arm/arm.md (arm_stack_protect_test_insn): Zero out
	operand 2 after use.
	* config/arm/thumb1.md (thumb1_stack_protect_test_insn): Likewise.

2020-08-06  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96446
	* config/rs6000/mma.md (*movpxi): Add xxsetaccz generation.
	Disable split for zero constant source operand.
	(mma_xxsetaccz): Change to define_expand.  Call gen_movpxi.

2020-08-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/96480
	* tree-ssa-reassoc.c (suitable_cond_bb): Add TEST_SWAPPED_P argument.
	If TEST_BB ends in cond and has one edge to *OTHER_BB and another
	through an empty bb to that block too, if PHI args don't match, retry
	them through the other path from TEST_BB.
	(maybe_optimize_range_tests): Adjust callers.  Handle such LAST_BB
	through inversion of the condition.

2020-08-06  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf-helpers.h (KERNEL_HELPER): Define.
	(KERNEL_VERSION): Remove.
	* config/bpf/bpf-helpers.def: Delete.
	* config/bpf/bpf.c (bpf_handle_fndecl_attribute): New function.
	(bpf_attribute_table): Define.
	(bpf_helper_names): Delete.
	(bpf_helper_code): Likewise.
	(enum bpf_builtins): Adjust to new helpers mechanism.
	(bpf_output_call): Likewise.
	(bpf_init_builtins): Likewise.
	(bpf_init_builtins): Likewise.
	* doc/extend.texi (BPF Function Attributes): New section.
	(BPF Kernel Helpers): Delete section.

2020-08-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96491
	* tree-ssa-sink.c (sink_common_stores_to_bb): Avoid
	sinking across abnormal edges.

2020-08-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96483
	* tree-ssa-pre.c (create_component_ref_by_pieces_1): Handle
	POLY_INT_CST.

2020-08-06  Richard Biener  <rguenther@suse.de>

	* graphite-isl-ast-to-gimple.c (ivs_params): Use hash_map instead
	of std::map.
	(ivs_params_clear): Adjust.
	(gcc_expression_from_isl_ast_expr_id): Likewise.
	(graphite_create_new_loop): Likewise.
	(add_parameters_to_ivs_params): Likewise.

2020-08-06  Roger Sayle  <roger@nextmovesoftware.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (MAXMIN_IMODE): No longer needed.
	(<maxmin><mode>3):  Support SWI248 and general_operand for
	second operand, when TARGET_CMOVE.
	(<maxmin><mode>3_1 splitter): Optimize comparisons against
	0, 1 and -1 to use "test" instead of "cmp".
	(*<maxmin>di3_doubleword): Likewise, allow general_operand
	and enable on TARGET_CMOVE.
	(peephole2): Convert clearing a register after a flag setting
	instruction into an xor followed by the original flag setter.

2020-08-06  Gerald Pfeifer  <gerald@pfeifer.com>

	* ipa-fnsummary.c (INCLUDE_VECTOR): Define.
	Remove direct inclusion of <vector>.

2020-08-06  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_adjust_vect_cost_per_loop): New
	function.
	(rs6000_finish_cost): Call rs6000_adjust_vect_cost_per_loop.
	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Add cost
	modeling for vector with length.
	(vect_rgroup_iv_might_wrap_p): New function, factored out from...
	* tree-vect-loop-manip.c (vect_set_loop_controls_directly): ...this.
	Update function comment.
	* tree-vect-stmts.c (vect_gen_len): Update function comment.
	* tree-vectorizer.h (vect_rgroup_iv_might_wrap_p): New declare.

2020-08-06  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vectorizer.c (try_vectorize_loop_1): Skip the epilogue loops
	for dbgcnt check.

2020-08-05  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/95906
	PR target/70314
	* match.pd ((c ? a : b) op d, (c ? a : b) op (c ? d : e),
	(v ? w : 0) ? a : b, c1 ? c2 ? a : b : b): New transformations.
	(op (c ? a : b)): Update to match the new transformations.

2020-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/96191
	* config/aarch64/aarch64.md (stack_protect_test_<mode>): Set the
	CC register directly, instead of a GPR.  Replace the original GPR
	destination with an extra scratch register.  Zero out operand 3
	after use.
	(stack_protect_test): Update accordingly.

2020-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (load_pair_sw_<SX:mode><SX2:mode>)
	(load_pair_dw_<DX:mode><DX2:mode>, load_pair_dw_tftf)
	(store_pair_sw_<SX:mode><SX2:mode>)
	(store_pair_dw_<DX:mode><DX2:mode>, store_pair_dw_tftf)
	(*load_pair_extendsidi2_aarch64)
	(*load_pair_zero_extendsidi2_aarch64): Use %z for the memory operand.
	* config/aarch64/aarch64-simd.md (load_pair<DREG:mode><DREG2:mode>)
	(vec_store_pair<DREG:mode><DREG2:mode>, load_pair<VQ:mode><VQ2:mode>)
	(vec_store_pair<VQ:mode><VQ2:mode>): Likewise.

2020-08-05  Richard Biener  <rguenther@suse.de>

	* tree-ssa-loop-im.c (invariantness_dom_walker): Remove.
	(invariantness_dom_walker::before_dom_children): Move to ...
	(compute_invariantness): ... this function.
	(move_computations): Inline ...
	(tree_ssa_lim): ... here, share RPO order and avoid some
	cfun references.
	(analyze_memory_references): Remove sorting of location
	lists, instead assert they are sorted already when checking.
	(prev_flag_edges): Remove.
	(execute_sm_if_changed): Pass down and adjust prev edge state.
	(execute_sm_exit): Likewise.
	(hoist_memory_references): Likewise.  Commit edge insertions
	of each processed exit.
	(store_motion_loop): Do not commit edge insertions on all
	edges in the function.
	(tree_ssa_lim_initialize): Do not call alloc_aux_for_edges.
	(tree_ssa_lim_finalize): Do not call free_aux_for_edges.

2020-08-05  Richard Biener  <rguenther@suse.de>

	* genmatch.c (fail_label): New global.
	(expr::gen_transform): Branch to fail_label instead of
	returning.  Fix indent of call argument checking.
	(dt_simplify::gen_1): Compute and emit fail_label, branch
	to it instead of returning early.

2020-08-05  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_for): Don't disallow combined non-rectangular
	loops.

2020-08-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/96459
	* omp-low.c (lower_omp_taskreg): Call lower_reduction_clauses even in
	for host teams.

2020-08-05  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_for_init_counts): Remember
	first_inner_iterations, factor and n1o from the number of iterations
	computation in *fd.
	(expand_omp_for_init_vars): Use more efficient logical iteration number
	to actual iterator values computation even for non-rectangular loops
	where number of loop iterations could not be computed at compile time.

2020-08-05  2020-08-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h (vec_blendv, vec_permx): Add define.
	* config/rs6000/altivec.md (UNSPEC_XXBLEND, UNSPEC_XXPERMX.): New
	unspecs.
	(VM3): New define_mode.
	(VM3_char): New define_attr.
	(xxblend_<mode> mode VM3): New define_insn.
	(xxpermx): New define_expand.
	(xxpermx_inst): New define_insn.
	* config/rs6000/rs6000-builtin.def (VXXBLEND_V16QI, VXXBLEND_V8HI,
	VXXBLEND_V4SI, VXXBLEND_V2DI, VXXBLEND_V4SF, VXXBLEND_V2DF): New
	BU_P10V_3 definitions.
	(XXBLEND): New BU_P10_OVERLOAD_3 definition.
	(XXPERMX): New BU_P10_OVERLOAD_4 definition.
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	(P10_BUILTIN_VXXPERMX): Add if statement.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VXXBLEND_V16QI,
	P10_BUILTIN_VXXBLEND_V8HI, P10_BUILTIN_VXXBLEND_V4SI,
	P10_BUILTIN_VXXBLEND_V2DI, P10_BUILTIN_VXXBLEND_V4SF,
	P10_BUILTIN_VXXBLEND_V2DF, P10_BUILTIN_VXXPERMX): Define
	overloaded arguments.
	(rs6000_expand_quaternop_builtin): Add if case for CODE_FOR_xxpermx.
	(builtin_quaternary_function_type): Add v16uqi_type and xxpermx_type
	variables, add case statement for P10_BUILTIN_VXXPERMX.
	(builtin_function_type): Add case statements for
	P10_BUILTIN_VXXBLEND_V16QI, P10_BUILTIN_VXXBLEND_V8HI,
	P10_BUILTIN_VXXBLEND_V4SI, P10_BUILTIN_VXXBLEND_V2DI.
	* doc/extend.texi: Add documentation for vec_blendv and vec_permx.

2020-08-05  2020-08-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h (vec_splati, vec_splatid, vec_splati_ins):
	Add defines.
	* config/rs6000/altivec.md (UNSPEC_XXSPLTIW, UNSPEC_XXSPLTID,
	UNSPEC_XXSPLTI32DX): New.
	(vxxspltiw_v4si, vxxspltiw_v4sf_inst, vxxspltidp_v2df_inst,
	vxxsplti32dx_v4si_inst, vxxsplti32dx_v4sf_inst): New define_insn.
	(vxxspltiw_v4sf, vxxspltidp_v2df, vxxsplti32dx_v4si,
	vxxsplti32dx_v4sf.): New define_expands.
	* config/rs6000/predicates.md (u1bit_cint_operand,
	s32bit_cint_operand, c32bit_cint_operand): New predicates.
	* config/rs6000/rs6000-builtin.def (VXXSPLTIW_V4SI, VXXSPLTIW_V4SF,
	VXXSPLTID): New definitions.
	(VXXSPLTI32DX_V4SI, VXXSPLTI32DX_V4SF): New BU_P10V_3
	definitions.
	(XXSPLTIW, XXSPLTID): New definitions.
	(XXSPLTI32DX): Add definitions.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_XXSPLTIW,
	P10_BUILTIN_VEC_XXSPLTID, P10_BUILTIN_VEC_XXSPLTI32DX):
	New definitions.
	* config/rs6000/rs6000-protos.h (rs6000_constF32toI32): New extern
	declaration.
	* config/rs6000/rs6000.c (rs6000_constF32toI32): New function.
	* doc/extend.texi: Add documentation for vec_splati,
	vec_splatid, and vec_splati_ins.

2020-08-05  2020-08-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h (vec_sldb, vec_srdb): New defines.
	* config/rs6000/altivec.md (UNSPEC_SLDB, UNSPEC_SRDB): New.
	(SLDB_lr): New attribute.
	(VSHIFT_DBL_LR): New iterator.
	(vs<SLDB_lr>db_<mode>): New define_insn.
	* config/rs6000/rs6000-builtin.def (VSLDB_V16QI, VSLDB_V8HI,
	VSLDB_V4SI, VSLDB_V2DI, VSRDB_V16QI, VSRDB_V8HI, VSRDB_V4SI,
	VSRDB_V2DI): New BU_P10V_3 definitions.
	(SLDB, SRDB): New BU_P10_OVERLOAD_3 definitions.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_SLDB,
	P10_BUILTIN_VEC_SRDB): New definitions.
	(rs6000_expand_ternop_builtin) [CODE_FOR_vsldb_v16qi,
	CODE_FOR_vsldb_v8hi, CODE_FOR_vsldb_v4si, CODE_FOR_vsldb_v2di,
	CODE_FOR_vsrdb_v16qi, CODE_FOR_vsrdb_v8hi, CODE_FOR_vsrdb_v4si,
	CODE_FOR_vsrdb_v2di]: Add clauses.
	* doc/extend.texi: Add description for vec_sldb and vec_srdb.

2020-08-05  2020-08-04 Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h: Add define for vec_replace_elt and
	vec_replace_unaligned.
	* config/rs6000/vsx.md (UNSPEC_REPLACE_ELT, UNSPEC_REPLACE_UN): New
	unspecs.
	(REPLACE_ELT): New mode iterator.
	(REPLACE_ELT_char, REPLACE_ELT_sh, REPLACE_ELT_max): New mode attributes.
	(vreplace_un_<mode>, vreplace_elt_<mode>_inst): New.
	* config/rs6000/rs6000-builtin.def (VREPLACE_ELT_V4SI,
	VREPLACE_ELT_UV4SI, VREPLACE_ELT_V4SF, VREPLACE_ELT_UV2DI,
	VREPLACE_ELT_V2DF, VREPLACE_UN_V4SI, VREPLACE_UN_UV4SI,
	VREPLACE_UN_V4SF, VREPLACE_UN_V2DI, VREPLACE_UN_UV2DI,
	VREPLACE_UN_V2DF, (REPLACE_ELT, REPLACE_UN, VREPLACE_ELT_V2DI): New builtin
	entries.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_REPLACE_ELT,
	P10_BUILTIN_VEC_REPLACE_UN): New builtin argument definitions.
	(rs6000_expand_quaternop_builtin): Add 3rd argument checks for
	CODE_FOR_vreplace_elt_v4si, CODE_FOR_vreplace_elt_v4sf,
	CODE_FOR_vreplace_un_v4si, CODE_FOR_vreplace_un_v4sf.
	(builtin_function_type) [P10_BUILTIN_VREPLACE_ELT_UV4SI,
	P10_BUILTIN_VREPLACE_ELT_UV2DI, P10_BUILTIN_VREPLACE_UN_UV4SI,
	P10_BUILTIN_VREPLACE_UN_UV2DI]: New cases.
	* doc/extend.texi: Add description for vec_replace_elt and
	vec_replace_unaligned builtins.

2020-08-05  2020-08-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h (vec_insertl, vec_inserth): New defines.
	* config/rs6000/rs6000-builtin.def (VINSERTGPRBL, VINSERTGPRHL,
	VINSERTGPRWL, VINSERTGPRDL, VINSERTVPRBL, VINSERTVPRHL, VINSERTVPRWL,
	VINSERTGPRBR, VINSERTGPRHR, VINSERTGPRWR, VINSERTGPRDR, VINSERTVPRBR,
	VINSERTVPRHR, VINSERTVPRWR): New builtins.
	(INSERTL, INSERTH): New builtins.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_INSERTL,
	P10_BUILTIN_VEC_INSERTH): New overloaded definitions.
	(P10_BUILTIN_VINSERTGPRBL, P10_BUILTIN_VINSERTGPRHL,
	P10_BUILTIN_VINSERTGPRWL, P10_BUILTIN_VINSERTGPRDL,
	P10_BUILTIN_VINSERTVPRBL, P10_BUILTIN_VINSERTVPRHL,
	P10_BUILTIN_VINSERTVPRWL): Add case entries.
	* config/rs6000/vsx.md (define_c_enum): Add UNSPEC_INSERTL,
	UNSPEC_INSERTR.
	(define_expand): Add vinsertvl_<mode>, vinsertvr_<mode>,
	vinsertgl_<mode>, vinsertgr_<mode>, mode is VI2.
	(define_ins): vinsertvl_internal_<mode>, vinsertvr_internal_<mode>,
	vinsertgl_internal_<mode>, vinsertgr_internal_<mode>, mode VEC_I.
	* doc/extend.texi: Add documentation for vec_insertl, vec_inserth.

2020-08-05  2020-08-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.md: (UNSPEC_EXTRACTL, UNSPEC_EXTRACTR)
	(vextractl<mode>, vextractr<mode>)
	(vextractl<mode>_internal, vextractr<mode>_internal for mode VI2)
	(VI2): Move to ...
	* config/rs6000/vsx.md:	(UNSPEC_EXTRACTL, UNSPEC_EXTRACTR)
	(vextractl<mode>, vextractr<mode>)
	(vextractl<mode>_internal, vextractr<mode>_internal for mode VI2)
	(VI2):  ..here.
	* doc/extend.texi: Update documentation for vec_extractl.
	Replace builtin name vec_extractr with vec_extracth.  Update
	description of vec_extracth.

2020-08-04  Jim Wilson  <jimw@sifive.com>

	* doc/invoke.texi (AArch64 Options): Delete duplicate
	-mstack-protector-guard docs.

2020-08-04  Roger Sayle  <roger@nextmovesoftware.com>

	* config/nvptx/nvptx.md (smulhi3_highpart, smulsi3_highpart)
	(umulhi3_highpart, umulsi3_highpart): New instructions.

2020-08-04  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (R_AMDGPU_NONE): Delete.
	(R_AMDGPU_ABS32_LO): Delete.
	(R_AMDGPU_ABS32_HI): Delete.
	(R_AMDGPU_ABS64): Delete.
	(R_AMDGPU_REL32): Delete.
	(R_AMDGPU_REL64): Delete.
	(R_AMDGPU_ABS32): Delete.
	(R_AMDGPU_GOTPCREL): Delete.
	(R_AMDGPU_GOTPCREL32_LO): Delete.
	(R_AMDGPU_GOTPCREL32_HI): Delete.
	(R_AMDGPU_REL32_LO): Delete.
	(R_AMDGPU_REL32_HI): Delete.
	(reserved): Delete.
	(R_AMDGPU_RELATIVE64): Delete.

2020-08-04  Omar Tahir  <omar.tahir@arm.com>

	* config/arm/arm-cpus.in (armv8.1-m.main): Tune for Cortex-M55.

2020-08-04  Hu Jiangping  <hujiangping@cn.fujitsu.com>

	* config/aarch64/aarch64.c (aarch64_if_then_else_costs): Delete
	redundant extra_cost variable.

2020-08-04  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-builtins.c (aarch64_call_properties):
	Use FLOAT_MODE_P macro instead of enumerating all floating-point
	modes and add global flag FLAG_AUTO_FP.

2020-08-04  Jakub Jelinek  <jakub@redhat.com>

	* doc/extend.texi (symver): Add @cindex for symver function attribute.

2020-08-04  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/95433
	* match.pd (X * C1 == C2): New transformation.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-sprintf.c (get_int_range): Adjust for irange API.
	(format_integer): Same.
	(handle_printf_call): Same.

2020-08-04  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md ("<expander>ti3"): New.

2020-08-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88240
	* tree-ssa-sccvn.h (vn_reference_s::punned): New flag.
	* tree-ssa-sccvn.c (vn_reference_insert): Initialize punned.
	(vn_reference_insert_pieces): Likewise.
	(visit_reference_op_call): Likewise.
	(visit_reference_op_load): Track whether a ref was punned.
	* tree-ssa-pre.c (do_hoist_insertion): Refuse to perform hoist
	insertion on punned floating point loads.

2020-08-04  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_gen_store_pair): Add case
	for E_V4SImode.
	(aarch64_gen_load_pair): Likewise.
	(aarch64_copy_one_block_and_progress_pointers): Handle 256 bit copy.
	(aarch64_expand_cpymem): Expand copy_limit to 256bits where
	appropriate.

2020-08-04  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64.md (aarch64_fjcvtzs): Add missing
	clobber.
	* doc/sourcebuild.texi (aarch64_fjcvtzs_hw) Document new
	target supports option.

2020-08-04  Tom de Vries  <tdevries@suse.de>

	PR target/96428
	* config/nvptx/nvptx.c (nvptx_gen_shuffle): Handle V2SI/V2DI.

2020-08-04  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/96426
	* tree-vect-generic.c (expand_vector_conversion): Replace .VEC_CONVERT
	call with GIMPLE_NOP if there is no lhs.

2020-08-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/96354
	* gimple-fold.c (maybe_canonicalize_mem_ref_addr): Add IS_DEBUG
	argument.  Return false instead of gcc_unreachable if it is true and
	get_addr_base_and_unit_offset returns NULL.
	(fold_stmt_1) <case GIMPLE_DEBUG>: Adjust caller.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (simplify_using_ranges::vrp_evaluate_conditional):
	Call is_gimple_min_invariant dropped from previous patch.

2020-08-04  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_for_init_counts): For triangular loops
	compute number of iterations at runtime more efficiently.
	(expand_omp_for_init_vars): Adjust immediate dominators.
	(extract_omp_for_update_vars): Likewise.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (simplify_using_ranges::two_valued_val_range_p):
	Use irange API.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (simplify_conversion_using_ranges): Convert to irange API.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (test_for_singularity): Use irange API.
	(simplify_using_ranges::simplify_cond_using_ranges_1): Do not
	special case VR_RANGE.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (simplify_using_ranges::vrp_evaluate_conditional): Adjust
	for irange API.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (simplify_using_ranges::op_with_boolean_value_range_p): Adjust
	for irange API.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-ssanames.c (get_range_info): Use irange instead of value_range.
	* tree-ssanames.h (get_range_info): Same.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* fold-const.c (expr_not_equal_to): Adjust for irange API.

2020-08-04  Aldy Hernandez  <aldyh@redhat.com>

	* builtins.c (determine_block_size): Remove ad-hoc range canonicalization.

2020-08-04  Xionghu Luo  <luoxhu@linux.ibm.com>

	PR rtl-optimization/71309
	* dse.c (find_shift_sequence): Use subreg of shifted from high part
	register to avoid loading from address.

2020-08-03  Jonathan Wakely  <jwakely@redhat.com>

	* doc/cpp.texi (Variadic Macros): Use the exact ... token in
	code examples.

2020-08-03  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi: Refer to c++20

2020-08-03  Julian Brown  <julian@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* gimplify.c (gimplify_omp_target_update): Allow GOMP_MAP_TO_PSET
	without a preceding data-movement mapping.

2020-08-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (ASM_DECLARE_FUNCTION_NAME): UNDEF before
	use.
	(DEF_MIN_OSX_VERSION): Only define if there's no existing
	def.

2020-08-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (IN_TARGET_CODE): Remove.
	(darwin_mergeable_constant_section): Handle poly-int machine modes.
	(machopic_select_rtx_section): Likewise.

2020-08-03  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/96430
	* range-op.cc (operator_tests): Do not shift by 31 on targets with
	integer's smaller than 32 bits.

2020-08-03  Martin Jambor  <mjambor@suse.cz>

	* hsa-brig-format.h: Moved to brig/brigfrontend.
	* hsa-brig.c: Removed.
	* hsa-builtins.def: Likewise.
	* hsa-common.c: Likewise.
	* hsa-common.h: Likewise.
	* hsa-dump.c: Likewise.
	* hsa-gen.c: Likewise.
	* hsa-regalloc.c: Likewise.
	* ipa-hsa.c: Likewise.
	* omp-grid.c: Likewise.
	* omp-grid.h: Likewise.
	* Makefile.in (BUILTINS_DEF): Remove hsa-builtins.def.
	(OBJS): Remove hsa-common.o, hsa-gen.o, hsa-regalloc.o, hsa-brig.o,
	hsa-dump.o, ipa-hsa.c and omp-grid.o.
	(GTFILES): Removed hsa-common.c and omp-expand.c.
	* builtins.def: Remove processing of hsa-builtins.def.
	(DEF_HSA_BUILTIN): Remove.
	* common.opt (flag_disable_hsa): Remove.
	(-Whsa): Ignore.
	* config.in (ENABLE_HSA): Removed.
	* configure.ac: Removed handling configuration for hsa offloading.
	(ENABLE_HSA): Removed.
	* configure: Regenerated.
	* doc/install.texi (--enable-offload-targets): Remove hsa from the
	example.
	(--with-hsa-runtime): Reword to reference any HSA run-time, not
	specifically HSA offloading.
	* doc/invoke.texi (Option Summary): Remove -Whsa.
	(Warning Options): Likewise.
	(Optimize Options): Remove hsa-gen-debug-stores.
	* doc/passes.texi (Regular IPA passes): Remove section on IPA HSA
	pass.
	* gimple-low.c (lower_stmt): Remove GIMPLE_OMP_GRID_BODY case.
	* gimple-pretty-print.c (dump_gimple_omp_for): Likewise.
	(dump_gimple_omp_block): Likewise.
	(pp_gimple_stmt_1): Likewise.
	* gimple-walk.c (walk_gimple_stmt): Likewise.
	* gimple.c (gimple_build_omp_grid_body): Removed function.
	(gimple_copy): Remove GIMPLE_OMP_GRID_BODY case.
	* gimple.def (GIMPLE_OMP_GRID_BODY): Removed.
	* gimple.h (gf_mask): Removed GF_OMP_PARALLEL_GRID_PHONY,
	OMP_FOR_KIND_GRID_LOOP, GF_OMP_FOR_GRID_PHONY,
	GF_OMP_FOR_GRID_INTRA_GROUP, GF_OMP_FOR_GRID_GROUP_ITER and
	GF_OMP_TEAMS_GRID_PHONY.  Renumbered GF_OMP_FOR_KIND_SIMD and
	GF_OMP_TEAMS_HOST.
	(gimple_build_omp_grid_body): Removed declaration.
	(gimple_has_substatements): Remove GIMPLE_OMP_GRID_BODY case.
	(gimple_omp_for_grid_phony): Removed.
	(gimple_omp_for_set_grid_phony): Likewise.
	(gimple_omp_for_grid_intra_group): Likewise.
	(gimple_omp_for_grid_intra_group): Likewise.
	(gimple_omp_for_grid_group_iter): Likewise.
	(gimple_omp_for_set_grid_group_iter): Likewise.
	(gimple_omp_parallel_grid_phony): Likewise.
	(gimple_omp_parallel_set_grid_phony): Likewise.
	(gimple_omp_teams_grid_phony): Likewise.
	(gimple_omp_teams_set_grid_phony): Likewise.
	(CASE_GIMPLE_OMP): Remove GIMPLE_OMP_GRID_BODY case.
	* lto-section-in.c (lto_section_name): Removed hsa.
	* lto-streamer.h (lto_section_type): Removed LTO_section_ipa_hsa.
	* lto-wrapper.c (compile_images_for_offload_targets): Remove special
	handling of hsa.
	* omp-expand.c: Do not include hsa-common.h and gt-omp-expand.h.
	(parallel_needs_hsa_kernel_p): Removed.
	(grid_launch_attributes_trees): Likewise.
	(grid_launch_attributes_trees): Likewise.
	(grid_create_kernel_launch_attr_types): Likewise.
	(grid_insert_store_range_dim): Likewise.
	(grid_get_kernel_launch_attributes): Likewise.
	(get_target_arguments): Remove code passing HSA grid sizes.
	(grid_expand_omp_for_loop): Remove.
	(grid_arg_decl_map): Likewise.
	(grid_remap_kernel_arg_accesses): Likewise.
	(grid_expand_target_grid_body): Likewise.
	(expand_omp): Remove call to grid_expand_target_grid_body.
	(omp_make_gimple_edges): Remove GIMPLE_OMP_GRID_BODY case.
	* omp-general.c: Do not include hsa-common.h.
	(omp_maybe_offloaded): Do not check for HSA offloading.
	(omp_context_selector_matches): Likewise.
	* omp-low.c: Do not include hsa-common.h and omp-grid.h.
	(build_outer_var_ref): Remove handling of GIMPLE_OMP_GRID_BODY.
	(scan_sharing_clauses): Remove handling of OMP_CLAUSE__GRIDDIM_.
	(scan_omp_parallel): Remove handling of the phoney variant.
	(check_omp_nesting_restrictions): Remove handling of
	GIMPLE_OMP_GRID_BODY and GF_OMP_FOR_KIND_GRID_LOOP.
	(scan_omp_1_stmt): Remove handling of GIMPLE_OMP_GRID_BODY.
	(lower_omp_for_lastprivate): Remove handling of gridified loops.
	(lower_omp_for): Remove phony loop handling.
	(lower_omp_taskreg): Remove phony construct handling.
	(lower_omp_teams): Likewise.
	(lower_omp_grid_body): Removed.
	(lower_omp_1): Remove GIMPLE_OMP_GRID_BODY case.
	(execute_lower_omp): Do not call omp_grid_gridify_all_targets.
	* opts.c (common_handle_option): Do not handle hsa when processing
	OPT_foffload_.
	* params.opt (hsa-gen-debug-stores): Remove.
	* passes.def: Remove pass_ipa_hsa and pass_gen_hsail.
	* timevar.def: Remove TV_IPA_HSA.
	* toplev.c: Do not include hsa-common.h.
	(compile_file): Do not call hsa_output_brig.
	* tree-core.h (enum omp_clause_code): Remove OMP_CLAUSE__GRIDDIM_.
	(tree_omp_clause): Remove union field dimension.
	* tree-nested.c (convert_nonlocal_omp_clauses): Remove the
	OMP_CLAUSE__GRIDDIM_ case.
	(convert_local_omp_clauses): Likewise.
	* tree-pass.h (make_pass_gen_hsail): Remove declaration.
	(make_pass_ipa_hsa): Likewise.
	* tree-pretty-print.c (dump_omp_clause): Remove GIMPLE_OMP_GRID_BODY
	case.
	* tree.c (omp_clause_num_ops): Remove the element corresponding to
	OMP_CLAUSE__GRIDDIM_.
	(omp_clause_code_name): Likewise.
	(walk_tree_1): Remove GIMPLE_OMP_GRID_BODY case.
	* tree.h (OMP_CLAUSE__GRIDDIM__DIMENSION): Remove.
	(OMP_CLAUSE__GRIDDIM__SIZE): Likewise.
	(OMP_CLAUSE__GRIDDIM__GROUP): Likewise.

2020-08-03  Bu Le  <bule1@huawei.com>

	* config/aarch64/aarch64-sve.md (sub<mode>3): Add support for
	unpacked vectors.

2020-08-03  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (ASM_SPEC): Don't pass on "-md" option.

2020-08-03  Yunde Zhong  <zhongyunde@huawei.com>

	PR rtl-optimization/95696
	* regrename.c (regrename_analyze): New param include_all_block_p
	with default value TRUE.  If set to false, avoid disrupting SMS
	schedule.
	* regrename.h (regrename_analyze): Adjust prototype.

2020-08-03  Wei Wentao  <weiwt.fnst@cn.fujitsu.com>

	* doc/tm.texi.in (VECTOR_STORE_FLAG_VALUE): Fix a typo.
	* doc/tm.texi: Regenerate.

2020-08-03  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi: Add missing comma after octeontx2f95mm entry.

2020-08-03  Qian jianhua  <qianjh@cn.fujitsu.com>

	* config/aarch64/aarch64-cores.def (a64fx): New core.
	* config/aarch64/aarch64-tune.md: Regenerated.
	* config/aarch64/aarch64.c (a64fx_prefetch_tune, a64fx_tunings): New.
	* doc/invoke.texi: Add a64fx to the list.

2020-08-03  Roger Sayle  <roger@nextmovesoftware.com>

	PR rtl-optimization/61494
	* simplify-rtx.c (simplify_binary_operation_1) [MINUS]: Don't
	simplify x - 0.0 with -fsignaling-nans.

2020-08-03  Roger Sayle  <roger@nextmovesoftware.com>

	* genmatch.c (decision_tree::gen): Emit stub functions for
	tree code operand counts that have no simplifications.
	(main): Correct comment typo.

2020-08-03  Jonathan Wakely  <jwakely@redhat.com>

	* gimple-ssa-sprintf.c: Fix typos in comments.

2020-08-03  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/driver-aarch64.c (readline): Check return value fgets.

2020-08-03  Richard Biener  <rguenther@suse.de>

	* doc/match-and-simplify.texi: Amend accordingly.

2020-08-03  Richard Biener  <rguenther@suse.de>

	* genmatch.c (parser::gimple): New.
	(parser::parser): Initialize gimple flag member.
	(parser::parse_expr): Error on ! operator modifier when
	not targeting GIMPLE.
	(main): Pass down gimple flag to parser ctor.

2020-08-03  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (GTFILES): Move value-range.h up.
	* gengtype-lex.l: Set yylval to handle GTY markers on templates.
	* ipa-cp.c (initialize_node_lattices): Call value_range
	constructor.
	(ipcp_propagate_stage): Use in-place new so value_range construct
	is called.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Use std
	vec instead of GCC's vec<>.
	(evaluate_properties_for_edge): Adjust for std vec.
	(ipa_fn_summary_t::duplicate): Same.
	(estimate_ipcp_clone_size_and_time): Same.
	* ipa-prop.c (ipa_get_value_range): Use in-place new for
	value_range.
	* ipa-prop.h (struct GTY): Remove class keyword for m_vr.
	* range-op.cc (empty_range_check): Rename to...
	(empty_range_varying): ...this and adjust for varying.
	(undefined_shift_range_check): Adjust for irange.
	(range_operator::wi_fold): Same.
	(range_operator::fold_range): Adjust for irange.  Special case
	single pairs for performance.
	(range_operator::op1_range): Adjust for irange.
	(range_operator::op2_range): Same.
	(value_range_from_overflowed_bounds): Same.
	(value_range_with_overflow): Same.
	(create_possibly_reversed_range): Same.
	(range_true): Same.
	(range_false): Same.
	(range_true_and_false): Same.
	(get_bool_state):  Adjust for irange and tweak for performance.
	(operator_equal::fold_range): Adjust for irange.
	(operator_equal::op1_range): Same.
	(operator_equal::op2_range): Same.
	(operator_not_equal::fold_range): Same.
	(operator_not_equal::op1_range): Same.
	(operator_not_equal::op2_range): Same.
	(build_lt): Same.
	(build_le): Same.
	(build_gt): Same.
	(build_ge): Same.
	(operator_lt::fold_range): Same.
	(operator_lt::op1_range): Same.
	(operator_lt::op2_range): Same.
	(operator_le::fold_range): Same.
	(operator_le::op1_range): Same.
	(operator_le::op2_range): Same.
	(operator_gt::fold_range): Same.
	(operator_gt::op1_range): Same.
	(operator_gt::op2_range): Same.
	(operator_ge::fold_range): Same.
	(operator_ge::op1_range): Same.
	(operator_ge::op2_range): Same.
	(operator_plus::wi_fold): Same.
	(operator_plus::op1_range): Same.
	(operator_plus::op2_range): Same.
	(operator_minus::wi_fold): Same.
	(operator_minus::op1_range): Same.
	(operator_minus::op2_range): Same.
	(operator_min::wi_fold): Same.
	(operator_max::wi_fold): Same.
	(cross_product_operator::wi_cross_product): Same.
	(operator_mult::op1_range): New.
	(operator_mult::op2_range): New.
	(operator_mult::wi_fold): Adjust for irange.
	(operator_div::wi_fold): Same.
	(operator_exact_divide::op1_range): Same.
	(operator_lshift::fold_range): Same.
	(operator_lshift::wi_fold): Same.
	(operator_lshift::op1_range): New.
	(operator_rshift::op1_range): New.
	(operator_rshift::fold_range): Adjust for irange.
	(operator_rshift::wi_fold): Same.
	(operator_cast::truncating_cast_p): Abstract out from
	operator_cast::fold_range.
	(operator_cast::fold_range): Adjust for irange and tweak for
	performance.
	(operator_cast::inside_domain_p): Abstract out from fold_range.
	(operator_cast::fold_pair): Same.
	(operator_cast::op1_range): Use abstracted methods above.  Adjust
	for irange and tweak for performance.
	(operator_logical_and::fold_range): Adjust for irange.
	(operator_logical_and::op1_range): Same.
	(operator_logical_and::op2_range): Same.
	(unsigned_singleton_p): New.
	(operator_bitwise_and::remove_impossible_ranges): New.
	(operator_bitwise_and::fold_range): New.
	(wi_optimize_and_or):  Adjust for irange.
	(operator_bitwise_and::wi_fold): Same.
	(set_nonzero_range_from_mask): New.
	(operator_bitwise_and::simple_op1_range_solver): New.
	(operator_bitwise_and::op1_range): Adjust for irange.
	(operator_bitwise_and::op2_range): Same.
	(operator_logical_or::fold_range): Same.
	(operator_logical_or::op1_range): Same.
	(operator_logical_or::op2_range): Same.
	(operator_bitwise_or::wi_fold): Same.
	(operator_bitwise_or::op1_range): Same.
	(operator_bitwise_or::op2_range): Same.
	(operator_bitwise_xor::wi_fold): Same.
	(operator_bitwise_xor::op1_range): New.
	(operator_bitwise_xor::op2_range): New.
	(operator_trunc_mod::wi_fold):  Adjust for irange.
	(operator_logical_not::fold_range): Same.
	(operator_logical_not::op1_range): Same.
	(operator_bitwise_not::fold_range): Same.
	(operator_bitwise_not::op1_range): Same.
	(operator_cst::fold_range): Same.
	(operator_identity::fold_range): Same.
	(operator_identity::op1_range): Same.
	(class operator_unknown): New.
	(operator_unknown::fold_range): New.
	(class operator_abs): Adjust for irange.
	(operator_abs::wi_fold): Same.
	(operator_abs::op1_range): Same.
	(operator_absu::wi_fold): Same.
	(class operator_negate): Same.
	(operator_negate::fold_range): Same.
	(operator_negate::op1_range): Same.
	(operator_addr_expr::fold_range): Same.
	(operator_addr_expr::op1_range): Same.
	(pointer_plus_operator::wi_fold): Same.
	(pointer_min_max_operator::wi_fold): Same.
	(pointer_and_operator::wi_fold): Same.
	(pointer_or_operator::op1_range): New.
	(pointer_or_operator::op2_range): New.
	(pointer_or_operator::wi_fold):  Adjust for irange.
	(integral_table::integral_table): Add entries for IMAGPART_EXPR
	and POINTER_DIFF_EXPR.
	(range_cast):  Adjust for irange.
	(build_range3): New.
	(range3_tests): New.
	(widest_irange_tests): New.
	(multi_precision_range_tests): New.
	(operator_tests): New.
	(range_tests): New.
	* range-op.h (class range_operator): Adjust for irange.
	(range_cast): Same.
	* tree-vrp.c (range_fold_binary_symbolics_p): Adjust for irange and
	tweak for performance.
	(range_fold_binary_expr): Same.
	(masked_increment): Change to extern.
	* tree-vrp.h (masked_increment): New.
	* tree.c (cache_wide_int_in_type_cache): New function abstracted
	out from wide_int_to_tree_1.
	(wide_int_to_tree_1): Cache 0, 1, and MAX for pointers.
	* value-range-equiv.cc (value_range_equiv::deep_copy): Use kind
	method.
	(value_range_equiv::move): Same.
	(value_range_equiv::check): Adjust for irange.
	(value_range_equiv::intersect): Same.
	(value_range_equiv::union_): Same.
	(value_range_equiv::dump): Same.
	* value-range.cc (irange::operator=): Same.
	(irange::maybe_anti_range): New.
	(irange::copy_legacy_range): New.
	(irange::set_undefined): Adjust for irange.
	(irange::swap_out_of_order_endpoints): Abstract out from set().
	(irange::set_varying): Adjust for irange.
	(irange::irange_set): New.
	(irange::irange_set_anti_range): New.
	(irange::set): Adjust for irange.
	(value_range::set_nonzero): Move to header file.
	(value_range::set_zero): Move to header file.
	(value_range::check): Rename to...
	(irange::verify_range): ...this.
	(value_range::num_pairs): Rename to...
	(irange::legacy_num_pairs): ...this, and adjust for irange.
	(value_range::lower_bound): Rename to...
	(irange::legacy_lower_bound): ...this, and adjust for irange.
	(value_range::upper_bound): Rename to...
	(irange::legacy_upper_bound): ...this, and adjust for irange.
	(value_range::equal_p): Rename to...
	(irange::legacy_equal_p): ...this.
	(value_range::operator==): Move to header file.
	(irange::equal_p): New.
	(irange::symbolic_p): Adjust for irange.
	(irange::constant_p): Same.
	(irange::singleton_p): Same.
	(irange::value_inside_range): Same.
	(irange::may_contain_p): Same.
	(irange::contains_p): Same.
	(irange::normalize_addresses): Same.
	(irange::normalize_symbolics): Same.
	(irange::legacy_intersect): Same.
	(irange::legacy_union): Same.
	(irange::union_): Same.
	(irange::intersect): Same.
	(irange::irange_union): New.
	(irange::irange_intersect): New.
	(subtract_one): New.
	(irange::invert): Adjust for irange.
	(dump_bound_with_infinite_markers): New.
	(irange::dump): Adjust for irange.
	(debug): Add irange versions.
	(range_has_numeric_bounds_p): Adjust for irange.
	(vrp_val_max): Move to header file.
	(vrp_val_min): Move to header file.
	(DEFINE_INT_RANGE_GC_STUBS): New.
	(DEFINE_INT_RANGE_INSTANCE): New.
	* value-range.h (class irange): New.
	(class int_range): New.
	(class value_range): Rename to a instantiation of int_range.
	(irange::legacy_mode_p): New.
	(value_range::value_range): Remove.
	(irange::kind): New.
	(irange::num_pairs): Adjust for irange.
	(irange::type): Adjust for irange.
	(irange::tree_lower_bound): New.
	(irange::tree_upper_bound): New.
	(irange::type): Adjust for irange.
	(irange::min): Same.
	(irange::max): Same.
	(irange::varying_p): Same.
	(irange::undefined_p): Same.
	(irange::zero_p): Same.
	(irange::nonzero_p): Same.
	(irange::supports_type_p): Same.
	(range_includes_zero_p): Same.
	(gt_ggc_mx): New.
	(gt_pch_nx): New.
	(irange::irange): New.
	(int_range::int_range): New.
	(int_range::operator=): New.
	(irange::set): Moved from value-range.cc and adjusted for irange.
	(irange::set_undefined): Same.
	(irange::set_varying): Same.
	(irange::operator==): Same.
	(irange::lower_bound): Same.
	(irange::upper_bound): Same.
	(irange::union_): Same.
	(irange::intersect): Same.
	(irange::set_nonzero): Same.
	(irange::set_zero): Same.
	(irange::normalize_min_max): New.
	(vrp_val_max): Move from value-range.cc.
	(vrp_val_min): Same.
	* vr-values.c (vr_values::get_lattice_entry): Call value_range
	constructor.

2020-08-02  Sergei Trofimovich  <siarheit@google.com>

	PR bootstrap/96404
	* var-tracking.c (vt_find_locations): Fully initialize
	all 'in_pending' bits.

2020-08-01  Jan Hubicka  <jh@suse.cz>

	* symtab.c (symtab_node::verify_base): Verify order.
	(symtab_node::verify_symtab_nodes): Verify order.

2020-08-01  Jan Hubicka  <jh@suse.cz>

	* predict.c (estimate_bb_frequencies): Cap recursive calls by 90%.

2020-08-01  Jojo R  <jiejie_rong@c-sky.com>

	* config/csky/csky_opts.h (float_abi_type): New.
	* config/csky/csky.h (TARGET_SOFT_FLOAT): New.
	(TARGET_HARD_FLOAT): New.
	(TARGET_HARD_FLOAT_ABI): New.
	(OPTION_DEFAULT_SPECS): Use mfloat-abi.
	* config/csky/csky.opt (mfloat-abi): New.
	* doc/invoke.texi (C-SKY Options): Document -mfloat-abi=.

2020-08-01  Cooper Qu  <cooper.qu@linux.alibaba.com>

	* config/csky/t-csky-linux: Delete big endian CPUs' multilib.

2020-07-31  Roger Sayle  <roger@nextmovesoftware.com>
	    Tom de Vries  <tdevries@suse.de>

	PR target/90928
	* config/nvptx/nvptx.c (nvptx_truly_noop_truncation): Implement.
	(TARGET_TRULY_NOOP_TRUNCATION): Define.

2020-07-31  Richard Biener  <rguenther@suse.de>

	PR debug/96383
	* langhooks-def.h (lhd_finalize_early_debug): Declare.
	(LANG_HOOKS_FINALIZE_EARLY_DEBUG): Define.
	(LANG_HOOKS_INITIALIZER): Amend.
	* langhooks.c: Include cgraph.h and debug.h.
	(lhd_finalize_early_debug): Default implementation from
	former code in finalize_compilation_unit.
	* langhooks.h (lang_hooks::finalize_early_debug): Add.
	* cgraphunit.c (symbol_table::finalize_compilation_unit):
	Call the finalize_early_debug langhook.

2020-07-31  Richard Biener  <rguenther@suse.de>

	* genmatch.c (expr::force_leaf): Add and initialize.
	(expr::gen_transform): Honor force_leaf by passing
	NULL as sequence argument to maybe_push_res_to_seq.
	(parser::parse_expr): Allow ! marker on result expression
	operations.
	* doc/match-and-simplify.texi: Amend.

2020-07-31  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-loop.c (vect_get_known_peeling_cost): Don't consider branch
	taken costs for prologue and epilogue if they don't exist.
	(vect_estimate_min_profitable_iters): Likewise.

2020-07-31  Martin Liska  <mliska@suse.cz>

	* cgraph.h: Remove leading empty lines.
	* cgraphunit.c (enum cgraph_order_sort_kind): Remove
	ORDER_UNDEFINED.
	(struct cgraph_order_sort): Add constructors.
	(cgraph_order_sort::process): New.
	(cgraph_order_cmp): New.
	(output_in_order): Simplify and push nodes to vector.

2020-07-31  Richard Biener  <rguenther@suse.de>

	PR middle-end/96369
	* fold-const.c (fold_range_test): Special-case constant
	LHS for short-circuiting operations.

2020-07-31  Martin Liska  <mliska@suse.cz>

	* gcov-io.h (GCOV_PREALLOCATED_KVP): New.

2020-07-31  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-builtins.c (aarch64_general_add_builtin):
	Add new argument ATTRS.
	(aarch64_call_properties): New function.
	(aarch64_modifies_global_state_p): Likewise.
	(aarch64_reads_global_state_p): Likewise.
	(aarch64_could_trap_p): Likewise.
	(aarch64_add_attribute): Likewise.
	(aarch64_get_attributes): Likewise.
	(aarch64_init_simd_builtins): Add attributes for each built-in function.

2020-07-31  Richard Biener  <rguenther@suse.de>

	PR debug/78288
	* var-tracking.c (vt_find_locations): Use
	rev_post_order_and_mark_dfs_back_seme and separately iterate
	over toplevel SCCs.

2020-07-31  Richard Biener  <rguenther@suse.de>

	* cfganal.h (rev_post_order_and_mark_dfs_back_seme): Adjust
	prototype.
	* cfganal.c (rpoamdbs_bb_data): New struct with pre BB data.
	(tag_header): New helper.
	(cmp_edge_dest_pre): Likewise.
	(rev_post_order_and_mark_dfs_back_seme): Compute SCCs,
	find SCC exits and perform a DFS walk with extra edges to
	compute a RPO with adjacent SCC members when requesting an
	iteration optimized order and populate the toplevel SCC array.
	* tree-ssa-sccvn.c (do_rpo_vn): Remove ad-hoc computation
	of max_rpo and fill it in from SCC extent info instead.

2020-07-30  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/altivec.h (vec_test_lsbb_all_ones): New define.
	(vec_test_lsbb_all_zeros): New define.
	* config/rs6000/rs6000-builtin.def (BU_P10_VSX_1): New built-in
	handling macro.
	(XVTLSBB_ZEROS, XVTLSBB_ONES): New builtin defines.
	(xvtlsbb_all_zeros, xvtlsbb_all_ones): New builtin overloads.
	* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_XVTLSBB_ZEROS,
	P10_BUILTIN_VEC_XVTLSBB_ONES): New altivec_builtin_types entries.
	* config/rs6000/rs6000.md (UNSPEC_XVTLSBB):  New unspec.
	* config/rs6000/vsx.md (*xvtlsbb_internal): New instruction define.
	(xvtlsbbo, xvtlsbbz): New instruction expands.

2020-07-30  Cooper Qu  <cooper.qu@linux.alibaba.com>

	* config/riscv/riscv-opts.h (stack_protector_guard): New enum.
	* config/riscv/riscv.c (riscv_option_override): Handle
	the new options.
	* config/riscv/riscv.md (stack_protect_set): New pattern to handle
	flexible stack protector guard settings.
	(stack_protect_set_<mode>): Ditto.
	(stack_protect_test): Ditto.
	(stack_protect_test_<mode>): Ditto.
	* config/riscv/riscv.opt (mstack-protector-guard=,
	mstack-protector-guard-reg=, mstack-protector-guard-offset=): New
	options.
	* doc/invoke.texi (Option Summary) [RISC-V Options]:
	Add -mstack-protector-guard=, -mstack-protector-guard-reg=, and
	-mstack-protector-guard-offset=.
	(RISC-V Options): Ditto.

2020-07-30  H.J. Lu  <hjl.tools@gmail.com>

	PR bootstrap/96202
	* configure: Regenerated.

2020-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96370
	* tree-ssa-reassoc.c (rewrite_expr_tree): Add operation
	code parameter and use it instead of picking it up from
	the stmt that is being rewritten.
	(reassociate_bb): Pass down the operation code.

2020-07-30  Roger Sayle  <roger@nextmovesoftware.com>
	    Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.md (nvptx_vector_index_operand): New predicate.
	(VECELEM): New mode attribute for a vector's uppercase element mode.
	(Vecelem): New mode attribute for a vector's lowercase element mode.
	(*vec_set<mode>_0, *vec_set<mode>_1, *vec_set<mode>_2)
	(*vec_set<mode>_3): New instructions.
	(vec_set<mode>): New expander to generate one of the above insns.
	(vec_extract<mode><Vecelem>): New instruction.

2020-07-30  Martin Liska  <mliska@suse.cz>

	PR target/95435
	* config/i386/x86-tune-costs.h: Use libcall for large sizes for
	-m32. Start using libcall from 128+ bytes.

2020-07-30  Martin Liska  <mliska@suse.cz>

	* config/i386/x86-tune-costs.h: Change code formatting.

2020-07-29  Roger Sayle  <roger@nextmovesoftware.com>

	* config/nvptx/nvptx.md (recip<mode>2): New instruction.

2020-07-29  Fangrui Song  <maskray@google.com>

	PR debug/95096
	* opts.c (common_handle_option): Don't make -gsplit-dwarf imply -g.
	* doc/invoke.texi (-gsplit-dwarf): Update documentation.

2020-07-29  Joe Ramsay  <joe.ramsay@arm.com>

	* config/arm/arm-protos.h (arm_coproc_mem_operand_no_writeback):
	Declare prototype.
	(arm_mve_mode_and_operands_type_check): Declare prototype.
	* config/arm/arm.c (arm_coproc_mem_operand): Refactor to use
	_arm_coproc_mem_operand.
	(arm_coproc_mem_operand_wb): New function to cover full, limited
	and no writeback.
	(arm_coproc_mem_operand_no_writeback): New constraint for memory
	operand with no writeback.
	(arm_print_operand): Extend 'E' specifier for memory operand
	that does not support writeback.
	(arm_mve_mode_and_operands_type_check): New constraint check for
	MVE memory operands.
	* config/arm/constraints.md: Add Uj constraint for VFP vldr.16
	and vstr.16.
	* config/arm/vfp.md (*mov_load_vfp_hf16): New pattern for
	vldr.16.
	(*mov_store_vfp_hf16): New pattern for vstr.16.
	(*mov<mode>_vfp_<mode>16): Remove MVE moves.

2020-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96349
	* tree-ssa-loop-split.c (stmt_semi_invariant_p_1): When the
	condition runs into a loop PHI with an abnormal entry value give up.

2020-07-29  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.c (vectorize_loops): Reset the SCEV
	cache if we removed any SIMD UID SSA defs.
	* gimple-loop-interchange.cc (pass_linterchange::execute):
	Reset the scev cache if we interchanged a loop.

2020-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95679
	* tree-ssa-propagate.h
	(substitute_and_fold_engine::propagate_into_phi_args): Return
	whether anything changed.
	* tree-ssa-propagate.c
	(substitute_and_fold_engine::propagate_into_phi_args): Likewise.
	(substitute_and_fold_dom_walker::before_dom_children): Update
	something_changed.

2020-07-29  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment):
	Ensure that loop variable npeel_tmp advances in each iteration.

2020-07-29  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.h (NO_FUNCTION_CSE): Define to 1.

2020-07-29  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.h (ASM_OUTPUT_EXTERNAL): Define to
	default_elf_asm_output_external.

2020-07-28  Sergei Trofimovich  <siarheit@google.com>

	PR ipa/96291
	* ipa-cp.c (has_undead_caller_from_outside_scc_p): Consider
	unoptimized callers as undead.

2020-07-28  Roger Sayle  <roger@nextmovesoftware.com>
	    Richard Biener  <rguenther@suse.de>

	* match.pd (popcount(x)&1 -> parity(x)): New simplification.
	(parity(~x) -> parity(x)): New simplification.
	(parity(x)^parity(y) -> parity(x^y)): New simplification.
	(parity(x&1) -> x&1): New simplification.
	(popcount(x) -> x>>C): New simplification.

2020-07-28  Roger Sayle  <roger@nextmovesoftware.com>
	    Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.md (extendqihi2): New instruction.
	(ashl<mode>3, ashr<mode>3, lshr<mode>3): Support HImode.

2020-07-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/96335
	* calls.c (maybe_warn_rdwr_sizes): Add FNDECL and FNTYPE arguments,
	instead of trying to rediscover them in the body.
	(initialize_argument_information): Adjust caller.

2020-07-28  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-loop.c (vect_get_known_peeling_cost): Factor out some code
	to determine peel_iters_epilogue to...
	(vect_get_peel_iters_epilogue): ...this new function.
	(vect_estimate_min_profitable_iters): Refactor cost calculation on
	peel_iters_prologue and peel_iters_epilogue.

2020-07-27  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84079
	* gimple-array-bounds.cc (array_bounds_checker::check_addr_expr):
	Only allow just-past-the-end references for the most significant
	array bound.

2020-07-27  Hu Jiangping  <hujiangping@cn.fujitsu.com>

	PR driver/96247
	* opts.c (check_alignment_argument): Set the -falign-Name
	on/off flag on and set the -falign-Name string value null,
	when the command-line specified argument is zero.

2020-07-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96058
	* expr.c (string_constant): Build string_constant only
	for a type that has same precision as char_type_node
	and is an integral type.

2020-07-27  Richard Biener  <rguenther@suse.de>

	* var-tracking.c (variable_tracking_main_1): Remove call
	to mark_dfs_back_edges.

2020-07-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/96128
	* tree-vect-generic.c (expand_vector_comparison): Do not expand
	vector comparison with VEC_COND_EXPR.

2020-07-27  H.J. Lu  <hjl.tools@gmail.com>

	PR bootstrap/96203
	* common.opt: Add -fcf-protection=check.
	* flag-types.h (cf_protection_level): Add CF_CHECK.
	* lto-wrapper.c (merge_and_complain): Issue an error for
	mismatching -fcf-protection values with -fcf-protection=check.
	Otherwise, merge -fcf-protection values.
	* doc/invoke.texi: Document -fcf-protection=check.

2020-07-27  Martin Liska  <mliska@suse.cz>

	PR lto/45375
	* symbol-summary.h: Call vec_safe_reserve before grow is called
	in order to grow to a reasonable size.
	* vec.h (vec_safe_reserve): Add missing function for vl_ptr
	type.

2020-07-26  Hans-Peter Nilsson  <hp@bitrange.com>

	* configure.ac (out-of-tree linker .hidden support): Don't turn off
	for mmix-knuth-mmixware.
	* configure: Regenerate.

2020-07-26  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Set the default value for -mblock-ops-unaligned-vsx.
	* config/rs6000/rs6000.opt: Add -mblock-ops-unaligned-vsx.
	* doc/invoke.texi: Document -mblock-ops-unaligned-vsx.

2020-07-25  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.c (TARGET_ASM_OUTPUT_IDENT): Override the default
	with default_asm_output_ident_directive.

2020-07-25  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_scalar_mode_supported_p): New function.
	(TARGET_SCALAR_MODE_SUPPORTED_P): New define.

2020-07-24  David Edelsohn  <dje.gcc@gmail.com>
	    Clement Chigot  <clement.chigot@atos.net>

	* config.gcc (powerpc-ibm-aix7.1): Use t-aix64 and biarch64 for
	cpu_is_64bit.
	* config/rs6000/aix71.h (ASM_SPEC): Remove aix64 option.
	(ASM_SPEC32): New.
	(ASM_SPEC64): New.
	(ASM_CPU_SPEC): Remove vsx and altivec options.
	(CPP_SPEC_COMMON): Rename from CPP_SPEC.
	(CPP_SPEC32): New.
	(CPP_SPEC64): New.
	(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
	(TARGET_DEFAULT): Use 64 bit mask if BIARCH.
	(LIB_SPEC_COMMON): Rename from LIB_SPEC.
	(LIB_SPEC32): New.
	(LIB_SPEC64): New.
	(LINK_SPEC_COMMON): Rename from LINK_SPEC.
	(LINK_SPEC32): New.
	(LINK_SPEC64): New.
	(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
	(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
	(CPP_SPEC): Same.
	(CPLUSPLUS_CPP_SPEC): Same.
	(LIB_SPEC): Same.
	(LINK_SPEC): Same.
	(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
	* config/rs6000/aix72.h (TARGET_DEFAULT): Use 64 bit mask if BIARCH.
	* config/rs6000/defaultaix64.h: Delete.

2020-07-24  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.opt: Delete -mpower10.

2020-07-24  Alexandre Oliva  <oliva@adacore.com>

	* config/i386/intelmic-mkoffload.c
	(generate_target_descr_file): Use dumppfx for save_temps
	files.  Pass -dumpbase et al down to the compiler.
	(generate_target_offloadend_file): Likewise.
	(generate_host_descr_file): Likewise.
	(prepare_target_image): Likewise.  Move out_obj_filename
	setting...
	(main): ... here.  Detect -dumpbase, set dumppfx too.

2020-07-24  Alexandre Oliva  <oliva@adacore.com>

	PR driver/96230
	* gcc.c (process_command): Adjust and document conditions to
	reset dumpbase_ext.

2020-07-24  Matthias Klose  <doko@ubuntu.com>

	* config/aarch64/aarch64.c (+aarch64_offload_options,
	TARGET_OFFLOAD_OPTIONS): New.

2020-07-24  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95750
	* config/i386/sync.md (mmem_thread_fence): Emit mfence_sse2 for -Os.

2020-07-23  Roger Sayle  <roger@nextmovesoftware.com>

	PR rtl-optimization/96298
	* simplify-rtx.c (simplify_binary_operation_1) [XOR]: Xor doesn't
	distribute over xor, so (a^b)^(c^b) is not the same as (a^c)^b.

2020-07-23  Dong JianQiang  <dongjianqiang2@huawei.com>

	PR gcov-profile/96267
	* gcov-io.c (gcov_open): enable if IN_GCOV_TOOL.

2020-07-23  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.c (adjust_vectorization_cost): Renamed to ...
	(rs6000_adjust_vect_cost_per_stmt): ... here.
	(rs6000_add_stmt_cost): Rename adjust_vectorization_cost to
	rs6000_adjust_vect_cost_per_stmt.

2020-07-23  Kewen Lin  <linkw@linux.ibm.com>

	* tree-ssa-loop-ivopts.c (get_mem_type_for_internal_fn): Handle
	IFN_LEN_LOAD and IFN_LEN_STORE.
	(get_alias_ptr_type_for_ptr_address): Likewise.

2020-07-23  Kito Cheng  <kito.cheng@sifive.com>

	PR target/96260
	* asan.c (asan_shadow_offset_set_p): New.
	* asan.h (asan_shadow_offset_set_p): Ditto.
	* toplev.c (process_options): Allow -fsanitize=kernel-address
	even TARGET_ASAN_SHADOW_OFFSET not implemented, only check when
	asan stack protection is enabled.

2020-07-22  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96236
	* config/rs6000/rs6000-call.c (rs6000_gimple_fold_mma_builtin): Handle
	little-endian memory ordering.

2020-07-22  Nathan Sidwell  <nathan@acm.org>

	* dumpfile.c (parse_dump_option): Deal with filenames
	containing '-'

2020-07-22  Nathan Sidwell  <nathan@acm.org>

	* incpath.c (add_path): Avoid multiple strlen calls.

2020-07-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* expmed.c (expand_sdiv_pow2): Check return value from emit_store_flag
	is not NULL_RTX before use.

2020-07-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* expr.c (convert_modes): Allow a constant integer to be converted to
	any scalar int mode.

2020-07-22  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/aarch64/aarch64-ldpstp.md: Add two peepholes for adjusted vector
	V2SI, V2SF, V2DI, V2DF load pair and store pair modes.
	* config/aarch64/aarch64-protos.h (aarch64_gen_adjusted_ldpstp):
	Change mode parameter to machine_mode.
	(aarch64_operands_adjust_ok_for_ldpstp): Change mode parameter to
	machine_mode.
	* config/aarch64/aarch64.c (aarch64_operands_adjust_ok_for_ldpstp):
	Change mode parameter to machine_mode.
	(aarch64_gen_adjusted_ldpstp): Change mode parameter to machine_mode.
	* config/aarch64/iterators.md (VP_2E): New iterator for 2 element vectors.

2020-07-22  Wei Wentao  <weiwt.fnst@cn.fujitsu.com>

	* doc/languages.texi: Fix “then”/“than” typo.

2020-07-21  Sunil K Pandey  <skpgkp2@gmail.com>

	PR target/95237
	* config/i386/i386-protos.h (ix86_local_alignment): Add
	another function parameter may_lower alignment. Default is
	false.
	* config/i386/i386.c (ix86_lower_local_decl_alignment): New
	function.
	(ix86_local_alignment): Amend ix86_local_alignment to accept
	another parameter may_lower. If may_lower is true, new align
	may be lower than incoming alignment. If may_lower is false,
	new align will be greater or equal to incoming alignment.
	(TARGET_LOWER_LOCAL_DECL_ALIGNMENT): Define.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (TARGET_LOWER_LOCAL_DECL_ALIGNMENT): New
	hook.
	* target.def (lower_local_decl_alignment): New hook.

2020-07-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95750
	* config/i386/sync.md (mfence_sse2): Enable for
	TARGET_64BIT and TARGET_SSE2.
	(mfence_nosse): Always enable.

2020-07-21  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430-protos.h (msp430_do_not_relax_short_jumps):
	Remove.
	* config/msp430/msp430.c (msp430_do_not_relax_short_jumps): Likewise.
	* config/msp430/msp430.md (cbranchhi4_real): Remove special case for
	msp430_do_not_relax_short_jumps.

2020-07-21  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md: New "extendqipsi2" define_insn.

2020-07-21  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (NO_FUNCTION_CSE): Set to true at -O2 and
	above.

2020-07-21  Xionghu Luo  <luoxhu@linux.ibm.com>

	PR rtl-optimization/89310
	* config/rs6000/rs6000.md (movsf_from_si2): New define_insn_and_split.

2020-07-20  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.c (mmix_expand_prologue): Calculate the total
	allocated size and set current_function_static_stack_size, if
	flag_stack_usage_info.

2020-07-20  Sergei Trofimovich  <siarheit@google.com>

	PR target/96190
	* config/sparc/linux.h (ENDFILE_SPEC): Use GNU_USER_TARGET_ENDFILE_SPEC
	to get crtendS.o for !no-pie mode.
	* config/sparc/linux64.h (ENDFILE_SPEC): Ditto.

2020-07-20  Yang Yang  <yangyang305@huawei.com>

	* tree-vect-stmts.c (vectorizable_simd_clone_call): Add
	VIEW_CONVERT_EXPRs if the arguments types and return type
	of simd clone function are distinct with the vectype of stmt.

2020-07-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95750
	* config/i386/i386.h (TARGET_AVOID_MFENCE):
	Rename from TARGET_USE_XCHG_FOR_ATOMIC_STORE.
	* config/i386/sync.md (mfence_sse2): Disable for TARGET_AVOID_MFENCE.
	(mfence_nosse): Enable also for TARGET_AVOID_MFENCE. Emit stack
	referred memory in word_mode.
	(mem_thread_fence): Do not generate mfence_sse2 pattern when
	TARGET_AVOID_MFENCE is true.
	(atomic_store<mode>): Update for rename.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_MFENCE):
	Rename from X86_TUNE_USE_XCHG_FOR_ATOMIC_STORE.

2020-07-20  Martin Sebor  <msebor@redhat.com>

	PR middle-end/95189
	PR middle-end/95886
	* builtins.c (inline_expand_builtin_string_cmp): Rename...
	(inline_expand_builtin_bytecmp): ...to this.
	(builtin_memcpy_read_str): Don't expect data to be nul-terminated.
	(expand_builtin_memory_copy_args): Handle object representations
	with embedded nul bytes.
	(expand_builtin_memcmp): Same.
	(expand_builtin_strcmp): Adjust call to naming change.
	(expand_builtin_strncmp): Same.
	* expr.c (string_constant): Create empty strings with nonzero size.
	* fold-const.c (c_getstr): Rename locals and update comments.
	* tree.c (build_string): Accept null pointer argument.
	(build_string_literal): Same.
	* tree.h (build_string): Provide a default.
	(build_string_literal): Same.

2020-07-20  Richard Biener  <rguenther@suse.de>

	* cfganal.c (rev_post_order_and_mark_dfs_back_seme): Remove
	write-only post array.

2020-07-20  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/93121
	* gimple-fold.c (fold_const_aggregate_ref_1): For COMPONENT_REF
	of a bitfield not aligned on byte boundaries try to
	fold_ctor_reference DECL_BIT_FIELD_REPRESENTATIVE if any and
	adjust it depending on endianity.

2020-07-20  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/93121
	* fold-const.c (native_encode_initializer): Handle bit-fields.

2020-07-20  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Set param_vect_partial_vector_usage to 0 explicitly.
	* doc/invoke.texi (vect-partial-vector-usage): Document new option.
	* optabs-query.c (get_len_load_store_mode): New function.
	* optabs-query.h (get_len_load_store_mode): New declare.
	* params.opt (vect-partial-vector-usage): New.
	* tree-vect-loop-manip.c (vect_set_loop_controls_directly): Add the
	handlings for vectorization using length-based partial vectors, call
	vect_gen_len for length generation, and rename some variables with
	items instead of scalars.
	(vect_set_loop_condition_partial_vectors): Add the handlings for
	vectorization using length-based partial vectors.
	(vect_do_peeling): Allow remaining eiters less than epilogue vf for
	LOOP_VINFO_USING_PARTIAL_VECTORS_P.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Init
	epil_using_partial_vectors_p.
	(_loop_vec_info::~_loop_vec_info): Call release_vec_loop_controls
	for lengths destruction.
	(vect_verify_loop_lens): New function.
	(vect_analyze_loop): Add handlings for epilogue of loop when it's
	marked to use vectorization using partial vectors.
	(vect_analyze_loop_2): Add the check to allow only one vectorization
	approach using partial vectorization at the same time.  Check param
	vect-partial-vector-usage for partial vectors decision.  Mark
	LOOP_VINFO_EPIL_USING_PARTIAL_VECTORS_P if the epilogue is
	considerable to use partial vectors.  Call release_vec_loop_controls
	for lengths destruction.
	(vect_estimate_min_profitable_iters): Adjust for loop vectorization
	using length-based partial vectors.
	(vect_record_loop_mask): Init factor to 1 for vectorization using
	mask-based partial vectors.
	(vect_record_loop_len): New function.
	(vect_get_loop_len): Likewise.
	* tree-vect-stmts.c (check_load_store_for_partial_vectors): Add
	checks for vectorization using length-based partial vectors.  Factor
	some code to lambda function get_valid_nvectors.
	(vectorizable_store): Add handlings when using length-based partial
	vectors.
	(vectorizable_load): Likewise.
	(vect_gen_len): New function.
	* tree-vectorizer.h (struct rgroup_controls): Add field factor
	mainly for length-based partial vectors.
	(vec_loop_lens): New typedef.
	(_loop_vec_info): Add lens and epil_using_partial_vectors_p.
	(LOOP_VINFO_EPIL_USING_PARTIAL_VECTORS_P): New macro.
	(LOOP_VINFO_LENS): Likewise.
	(LOOP_VINFO_FULLY_WITH_LENGTH_P): Likewise.
	(vect_record_loop_len): New declare.
	(vect_get_loop_len): Likewise.
	(vect_gen_len): Likewise.

2020-07-20  Hans-Peter Nilsson  <hp@bitrange.com>

	* config/mmix/mmix.c (mmix_option_override): Reinstate default
	integer-emitting targetm.asm_out pseudos when dumping detailed
	assembly-code.
	(mmix_assemble_integer): Update comment.

2020-07-19  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95973
	PR target/96238
	* config/i386/cpuid.h: Add include guard.
	(__cpuidex): New.

2020-07-18  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95620
	* config/i386/x86-64.h (ASM_OUTPUT_ALIGNED_DECL_LOCAL): New.

2020-07-18  Peter Bergner  <bergner@linux.ibm.com>

	PR target/92488
	* config/rs6000/dfp.md (trunctdsd2): New define_insn.
	* config/rs6000/rs6000.md (define_attr "isa"): Add p9.
	(define_attr "enabled"): Handle p9.

2020-07-17  Roger Sayle  <roger@nextmovesoftware.com>

	* function.c (assign_parm_setup_block): Use the macro
	TRULY_NOOP_TRUNCATION_MODES_P instead of calling
	targetm.truly_noop_truncation directly.

2020-07-17  H.J. Lu  <hjl.tools@gmail.com>

	PR target/96186
	PR target/88713
	* config/i386/sse.md (VF_AVX512VL_VF1_128_256): Renamed to ...
	(VF1_AVX512ER_128_256): This.  Drop DF vector modes.
	(rsqrt<mode>2): Replace VF_AVX512VL_VF1_128_256 with
	VF1_AVX512ER_128_256.

2020-07-17  Tamar Christina  <tamar.christina@arm.com>

	* doc/sourcebuild.texi (dg-set-compiler-env-var,
	dg-set-target-env-var): Document.

2020-07-17  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/driver-arm.c (host_detect_local_cpu): Add GCC_CPUINFO.

2020-07-17  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/driver-aarch64.c (host_detect_local_cpu):
	Add GCC_CPUINFO.

2020-07-17  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/driver-aarch64.c (INCLUDE_SET): New.
	(parse_field): Use std::string.
	(split_words, readline, find_field): New.
	(host_detect_local_cpu): Fix truncation issues.

2020-07-17  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/mkoffload.c (EM_AMDGPU): Undefine before defining.
	(ELFOSABI_AMDGPU_HSA): Likewise.
	(ELFABIVERSION_AMDGPU_HSA): Likewise.
	(EF_AMDGPU_MACH_AMDGCN_GFX803): Likewise.
	(EF_AMDGPU_MACH_AMDGCN_GFX900): Likewise.
	(EF_AMDGPU_MACH_AMDGCN_GFX906): Likewise.
	(reserved): Delete.

2020-07-17  Andrew Pinski  <apinksi@marvell.com>
	    Dmitrij Pochepko  <dmitrij.pochepko@bell-sw.com>

	PR target/93720
	* config/aarch64/aarch64.c (aarch64_evpc_ins): New function.
	(aarch64_expand_vec_perm_const_1): Call it.
	* config/aarch64/aarch64-simd.md (aarch64_simd_vec_copy_lane): Make
	public, and add a "@" prefix.

2020-07-17  Andrew Pinski  <apinksi@marvell.com>
	    Dmitrij Pochepko  <dmitrij.pochepko@bell-sw.com>

	PR target/82199
	* config/aarch64/aarch64.c (aarch64_evpc_reencode): New function.
	(aarch64_expand_vec_perm_const_1): Call it.

2020-07-17  Zhiheng Xie  <xiezhiheng@huawei.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_type_qualifiers):
	Add new field flags.
	(VAR1): Add new field FLAG in macro.
	(VAR2): Likewise.
	(VAR3): Likewise.
	(VAR4): Likewise.
	(VAR5): Likewise.
	(VAR6): Likewise.
	(VAR7): Likewise.
	(VAR8): Likewise.
	(VAR9): Likewise.
	(VAR10): Likewise.
	(VAR11): Likewise.
	(VAR12): Likewise.
	(VAR13): Likewise.
	(VAR14): Likewise.
	(VAR15): Likewise.
	(VAR16): Likewise.
	(aarch64_general_fold_builtin): Likewise.
	(aarch64_general_gimple_fold_builtin): Likewise.
	* config/aarch64/aarch64-simd-builtins.def: Add default flag for
	each built-in function.
	* config/aarch64/geniterators.sh: Add new field in BUILTIN macro.

2020-07-17  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/96127
	* config/s390/s390.c (s390_expand_insv): Invoke the movstrict
	expanders to generate the pattern.
	* config/s390/s390.md ("*movstricthi", "*movstrictqi"): Remove the
	'*' to have callable expanders.

2020-07-16  Hans-Peter Nilsson  <hp@axis.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/93372
	* combine.c (is_just_move): Take an rtx_insn* as argument.  Use
	single_set on it.

2020-07-16  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96189
	* config/i386/sync.md
	(peephole2 to remove unneded compare after CMPXCHG):
	New pattern, also handle XOR zeroing and load of -1 by OR.

2020-07-16  Eric Botcazou  <ebotcazou@adacore.com>

	* config/i386/i386.c (ix86_compute_frame_layout): Minor tweak.
	(ix86_adjust_stack_and_probe): Delete.
	(ix86_adjust_stack_and_probe_stack_clash): Rename to above and add
	PROTECTION_AREA parameter.  If it is true, probe PROBE_INTERVAL plus
	a small dope beyond SIZE bytes.
	(ix86_emit_probe_stack_range): Use local variable.
	(ix86_expand_prologue): Adjust calls to ix86_adjust_stack_and_probe
	and tidy up the stack checking code.
	* explow.c (get_stack_check_protect): Fix head comment.
	(anti_adjust_stack_and_probe_stack_clash): Likewise.
	(allocate_dynamic_stack_space): Add comment.
	* tree-nested.c (lookup_field_for_decl): Set the DECL_IGNORED_P and
	TREE_NO_WARNING but not TREE_ADDRESSABLE flags on the field.

2020-07-16  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/mkoffload.c: Include simple-object.h and elf.h.
	(EM_AMDGPU): New macro.
	(ELFOSABI_AMDGPU_HSA): New macro.
	(ELFABIVERSION_AMDGPU_HSA): New macro.
	(EF_AMDGPU_MACH_AMDGCN_GFX803): New macro.
	(EF_AMDGPU_MACH_AMDGCN_GFX900): New macro.
	(EF_AMDGPU_MACH_AMDGCN_GFX906): New macro.
	(R_AMDGPU_NONE): New macro.
	(R_AMDGPU_ABS32_LO): New macro.
	(R_AMDGPU_ABS32_HI): New macro.
	(R_AMDGPU_ABS64): New macro.
	(R_AMDGPU_REL32): New macro.
	(R_AMDGPU_REL64): New macro.
	(R_AMDGPU_ABS32): New macro.
	(R_AMDGPU_GOTPCREL): New macro.
	(R_AMDGPU_GOTPCREL32_LO): New macro.
	(R_AMDGPU_GOTPCREL32_HI): New macro.
	(R_AMDGPU_REL32_LO): New macro.
	(R_AMDGPU_REL32_HI): New macro.
	(reserved): New macro.
	(R_AMDGPU_RELATIVE64): New macro.
	(gcn_s1_name): Delete global variable.
	(gcn_s2_name): Delete global variable.
	(gcn_o_name): Delete global variable.
	(gcn_cfile_name): Delete global variable.
	(files_to_cleanup): New global variable.
	(offload_abi): New global variable.
	(tool_cleanup): Use files_to_cleanup, not explicit list.
	(copy_early_debug_info): New function.
	(main): New local variables gcn_s1_name, gcn_s2_name, gcn_o_name,
	gcn_cfile_name.
	Create files_to_cleanup obstack.
	Recognize -march options.
	Copy early debug info from input .o files.

2020-07-16  Andrea Corallo  <andrea.corallo@arm.com>

	* Makefile.in (TAGS): Remove 'params.def'.

2020-07-16  Roger Sayle  <roger@nextmovesoftware.com>

	* target.def (TARGET_TRULY_NOOP_TRUNCATION): Clarify that
	targets that return false, indicating SUBREGs shouldn't be
	used, also need to provide a trunc?i?i2 optab that performs this
	truncation.
	* doc/tm.texi: Regenerate.

2020-07-15  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/96189
	* config/i386/sync.md
	(peephole2 to remove unneded compare after CMPXCHG): New pattern.

2020-07-15  Jakub Jelinek  <jakub@redhat.com>

	PR libgomp/96198
	* omp-general.h (struct omp_for_data): Rename min_inner_iterations
	member to first_inner_iterations, adjust comment.
	* omp-general.c (omp_extract_for_data): Adjust for the above change.
	Always use n1first and n2first to compute it, rather than depending
	on single_nonrect_cond_code.  Similarly, always compute factor
	as (m2 - m1) * outer_step / inner_step rather than sometimes m1 - m2
	depending on single_nonrect_cond_code.
	* omp-expand.c (expand_omp_for_init_vars): Rename min_inner_iterations
	to first_inner_iterations and min_inner_iterationsd to
	first_inner_iterationsd.

2020-07-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/96174
	* config/i386/avx512fintrin.h (_mm512_cmpeq_pd_mask,
	_mm512_mask_cmpeq_pd_mask, _mm512_cmplt_pd_mask,
	_mm512_mask_cmplt_pd_mask, _mm512_cmple_pd_mask,
	_mm512_mask_cmple_pd_mask, _mm512_cmpunord_pd_mask,
	_mm512_mask_cmpunord_pd_mask, _mm512_cmpneq_pd_mask,
	_mm512_mask_cmpneq_pd_mask, _mm512_cmpnlt_pd_mask,
	_mm512_mask_cmpnlt_pd_mask, _mm512_cmpnle_pd_mask,
	_mm512_mask_cmpnle_pd_mask, _mm512_cmpord_pd_mask,
	_mm512_mask_cmpord_pd_mask, _mm512_cmpeq_ps_mask,
	_mm512_mask_cmpeq_ps_mask, _mm512_cmplt_ps_mask,
	_mm512_mask_cmplt_ps_mask, _mm512_cmple_ps_mask,
	_mm512_mask_cmple_ps_mask, _mm512_cmpunord_ps_mask,
	_mm512_mask_cmpunord_ps_mask, _mm512_cmpneq_ps_mask,
	_mm512_mask_cmpneq_ps_mask, _mm512_cmpnlt_ps_mask,
	_mm512_mask_cmpnlt_ps_mask, _mm512_cmpnle_ps_mask,
	_mm512_mask_cmpnle_ps_mask, _mm512_cmpord_ps_mask,
	_mm512_mask_cmpord_ps_mask): Move outside of __OPTIMIZE__ guarded
	section.

2020-07-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/96176
	* builtins.c: Include gimple-ssa.h, tree-ssa-live.h and
	tree-outof-ssa.h.
	(expand_expr_force_mode): If exp is a SSA_NAME with different mode
	from MODE and get_gimple_for_ssa_name is a cast from MODE, use the
	cast's rhs.

2020-07-15  Jiufu Guo   <guojiufu@cn.ibm.com>

	* config/rs6000/rs6000.c (rs6000_loop_unroll_adjust): Refine hook.

2020-07-14  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000.md (rotldi3_insert_sf): Add TARGET_POWERPC64
	condition.
	* config/rs6000/rs6000.c (rs6000_expand_vector_init): Add
	TARGET_POWERPC64 requirement to TARGET_P8_VECTOR case.

2020-07-14  Lewis Hyatt  <lhyatt@gmail.com>

	PR preprocessor/49973
	PR other/86904
	* common.opt: Handle -ftabstop here instead of in c-family
	options.  Add -fdiagnostics-column-unit= and
	-fdiagnostics-column-origin= options.
	* opts.c (common_handle_option): Handle the new options.
	* diagnostic-format-json.cc (json_from_expanded_location): Add
	diagnostic_context argument.  Use it to convert column numbers as per
	the new options.
	(json_from_location_range): Likewise.
	(json_from_fixit_hint): Likewise.
	(json_end_diagnostic): Pass the new context argument to helper
	functions above.  Add "column-origin" field to the output.
	(test_unknown_location): Add the new context argument to calls to
	helper functions.
	(test_bad_endpoints): Likewise.
	* diagnostic-show-locus.c
	(exploc_with_display_col::exploc_with_display_col): Support
	tabstop parameter.
	(layout_point::layout_point): Make use of class
	exploc_with_display_col.
	(layout_range::layout_range): Likewise.
	(struct line_bounds): Clarify that the units are now always
	display columns.  Rename members accordingly.  Add constructor.
	(layout::print_source_line): Add support for tab expansion.
	(make_range): Adapt to class layout_range changes.
	(layout::maybe_add_location_range): Likewise.
	(layout::layout): Adapt to class exploc_with_display_col changes.
	(layout::calculate_x_offset_display): Support tabstop parameter.
	(layout::print_annotation_line): Adapt to struct line_bounds changes.
	(layout::print_line): Likewise.
	(line_label::line_label): Add diagnostic_context argument.
	(get_affected_range): Likewise.
	(get_printed_columns): Likewise.
	(layout::print_any_labels): Adapt to struct line_label changes.
	(class correction): Add m_tabstop member.
	(correction::correction): Add tabstop argument.
	(correction::compute_display_cols): Use m_tabstop.
	(class line_corrections): Add m_context member.
	(line_corrections::line_corrections): Add diagnostic_context argument.
	(line_corrections::add_hint): Use m_context to handle tabstops.
	(layout::print_trailing_fixits): Adapt to class line_corrections
	changes.
	(test_layout_x_offset_display_utf8): Support tabstop parameter.
	(test_layout_x_offset_display_tab): New selftest.
	(test_one_liner_colorized_utf8): Likewise.
	(test_tab_expansion): Likewise.
	(test_diagnostic_show_locus_one_liner_utf8): Call the new tests.
	(diagnostic_show_locus_c_tests): Likewise.
	(test_overlapped_fixit_printing): Adapt to helper class and
	function changes.
	(test_overlapped_fixit_printing_utf8): Likewise.
	(test_overlapped_fixit_printing_2): Likewise.
	* diagnostic.h (enum diagnostics_column_unit): New enum.
	(struct diagnostic_context): Add members for the new options.
	(diagnostic_converted_column): Declare.
	(json_from_expanded_location): Add new context argument.
	* diagnostic.c (diagnostic_initialize): Initialize new members.
	(diagnostic_converted_column): New function.
	(maybe_line_and_column): Be willing to output a column of 0.
	(diagnostic_get_location_text): Convert column number as per the new
	options.
	(diagnostic_report_current_module): Likewise.
	(assert_location_text): Add origin and column_unit arguments for
	testing the new functionality.
	(test_diagnostic_get_location_text): Test the new functionality.
	* doc/invoke.texi: Document the new options and behavior.
	* input.h (location_compute_display_column): Add tabstop argument.
	* input.c (location_compute_display_column): Likewise.
	(test_cpp_utf8): Add selftests for tab expansion.
	* tree-diagnostic-path.cc (default_tree_make_json_for_path): Pass the
	new context argument to json_from_expanded_location().

2020-07-14  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/96194
	* expr.c (expand_constructor): Don't create temporary for store to
	volatile MEM if exp has an addressable type.

2020-07-14  Nathan Sidwell  <nathan@acm.org>

	* hash-map.h (hash_map::get): Note it is a pointer to value.
	* incpath.h (incpath_kind): Align comments.

2020-07-14  Nathan Sidwell  <nathan@acm.org>

	* tree-core.h (tree_decl_with_vis, tree_function_decl):
	Note additional padding on 64-bits
	* tree.c (cache_integer_cst): Note why no caching of enum literals.
	(get_tree_code_name): Robustify error case.

2020-07-14  Nathan Sidwell  <nathan@acm.org>

	* doc/gty.texi: Fic gt_cleare_cache name.
	* doc/invoke.texi: Remove duplicate opindex Wabi-tag.

2020-07-14  Jakub Jelinek  <jakub@redhat.com>

	* omp-general.h (struct omp_for_data): Add adjn1 member.
	* omp-general.c (omp_extract_for_data): For non-rect loop, punt on
	count computing if n1, n2 or step are not INTEGER_CST earlier.
	Narrow the outer iterator range if needed so that non-rect loop
	has at least one iteration for each outer range iteration.  Compute
	adjn1.
	* omp-expand.c (expand_omp_for_init_vars): Use adjn1 if non-NULL
	instead of the outer loop's n1.

2020-07-14  Matthias Klose  <doko@ubuntu.com>

	PR lto/95604
	* lto-wrapper.c (merge_and_complain): Add decoded options as parameter,
	error on different values for -fcf-protection.
	(append_compiler_options): Pass -fcf-protection option.
	(find_and_merge_options): Add decoded options as parameter,
	pass decoded_options to merge_and_complain.
	(run_gcc): Pass decoded options to find_and_merge_options.
	* lto-opts.c (lto_write_options): Pass -fcf-protection option.

2020-07-13  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.md (sibcall_local): Merge sibcall_local32
	and sibcall_local64.
	(sibcall_value_local): Similarly.

2020-07-13  Nathan Sidwell  <nathan@acm.org>

	* Makefile.in (distclean): Remove long gone cxxmain.c

2020-07-13  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95443
	* config/i386/i386.md (cmpstrnsi): Pass a copy of the string
	length to cmpstrnqi patterns.

2020-07-13  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/96130
	* ipa-fnsummary.c (analyze_function_body): Treat NULL bb->aux
	as false predicate.

2020-07-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96163
	* tree-vect-slp.c (vect_schedule_slp_instance): Put new stmts
	at least after region begin.

2020-07-13  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Add
	__ARM_FEATURE_PAC_DEFAULT support.

2020-07-13  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94891
	* doc/extend.texi: Update the text for  __builtin_return_address.

2020-07-13  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94891
	* config/aarch64/aarch64.c (aarch64_return_address_signing_enabled):
	Disable return address signing if __builtin_eh_return is used.

2020-07-13  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94891
	PR target/94791
	* config/aarch64/aarch64-protos.h (aarch64_return_addr_rtx): Declare.
	* config/aarch64/aarch64.c (aarch64_return_addr_rtx): New.
	(aarch64_return_addr): Use aarch64_return_addr_rtx.
	* config/aarch64/aarch64.h (PROFILE_HOOK): Likewise.

2020-07-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/95114
	* tree.h (virtual_method_call_p): Add a default-false parameter
	that indicates whether the function is being called from dump
	routines.
	(obj_type_ref_class): Likewise.
	* tree.c (virtual_method_call_p): Likewise.
	* ipa-devirt.c (obj_type_ref_class): Likewise.  Lazily add ODR
	type information for the type when the parameter is false.
	* tree-pretty-print.c (dump_generic_node): Update calls to
	virtual_method_call_p and obj_type_ref_class accordingly.

2020-07-13  Julian Brown  <julian@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* gimplify.c (gimplify_scan_omp_clauses): Do not strip
	GOMP_MAP_TO_PSET/GOMP_MAP_POINTER for OpenACC enter/exit data
	directives (see also PR92929).

2020-07-13  Roger Sayle  <roger@nextmovesoftware.com>

	* convert.c (convert_to_integer_1): Narrow integer operations
	even on targets that require explicit truncation instructions.

2020-07-13  Hans-Peter Nilsson  <hp@axis.com>

	PR target/93372
	* config/cris/cris-passes.def: New file.
	* config/cris/t-cris (PASSES_EXTRA): Add cris-passes.def.
	* config/cris/cris.c: Add infrastructure bits and pass execute
	function cris_postdbr_cmpelim.
	* config/cris/cris-protos.h (make_pass_cris_postdbr_cmpelim): Declare.

2020-07-13  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/t-cris: Remove gt-cris.h-related excessive cargo.

2020-07-13  Hans-Peter Nilsson  <hp@axis.com>

	PR target/93372
	* config/cris/cris.md ("*add<mode>3_addi"): New splitter.
	("*addi_b_<mode>"): New pattern.
	("*addsi3<setnz>"): Remove stale %-related comment.

2020-07-13  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.md ("setnz_subst", "setnz_subst", "setcc_subst"):
	Use match_dup in output template, not match_operand.

2020-07-13  Richard Biener  <rguenther@suse.de>

	* var-tracking.c (bb_heap_node_t): Remove unused typedef.
	(vt_find_locations): Eliminate visited bitmap in favor of
	RPO order check.  Dump statistics about the number of
	local BB dataflow computes.

2020-07-13  Richard Biener  <rguenther@suse.de>

	PR middle-end/94600
	* expr.c (expand_constructor): Make a temporary also if we're
	storing to volatile memory.

2020-07-13  Xionghu Luo  <luoxhu@linux.ibm.com>

	* config/rs6000/rs6000.md (rotl_unspec): New
	define_insn_and_split.

2020-07-13  Xionghu Luo  <luoxhu@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_expand_vector_init):
	Move V4SF to V4SI, init vector like V4SI and move to V4SF back.

2020-07-11  Roger Sayle  <roger@nextmovesoftware.com>

	* internal-fn.c (expand_mul_overflow): When checking for signed
	overflow from a widening multiplication, we access the truncated
	lowpart RES twice, so keep this value in a pseudo register.

2020-07-11  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/96146
	* value-range.cc (value_range::set): Only decompose POLY_INT_CST
	bounds to integers for VR_RANGE.  Decay to VR_VARYING for anti-ranges
	involving POLY_INT_CSTs.

2020-07-10  David Edelsohn  <dje.gcc@gmail.com>

	PR target/77373
	* config/rs6000/rs6000.c (rs6000_xcoff_select_section): Only
	create named section for VAR_DECL or FUNCTION_DECL.

2020-07-10  Joseph Myers  <joseph@codesourcery.com>

	* glimits.h [__STDC_VERSION__ > 201710L] (BOOL_MAX, BOOL_WIDTH):
	New macros.

2020-07-10  Alexander Popov  <alex.popov@linux.com>

	* shrink-wrap.c (try_shrink_wrapping): Improve debug output.

2020-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/96151
	* expr.c (expand_expr_real_2): When reducing bit fields,
	clear the target if it has a different mode from the expression.
	(reduce_to_bit_field_precision): Don't do that here.  Instead
	assert that the target already has the correct mode.

2020-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/92789
	PR target/95726
	* config/arm/arm.c (arm_attribute_table): Add
	"Advanced SIMD type".
	(arm_comp_type_attributes): Check that the "Advanced SIMD type"
	attributes are equal.
	* config/arm/arm-builtins.c: Include stringpool.h and
	attribs.h.
	(arm_mangle_builtin_vector_type): Use the mangling recorded
	in the "Advanced SIMD type" attribute.
	(arm_init_simd_builtin_types): Add an "Advanced SIMD type"
	attribute to each Advanced SIMD type, using the mangled type
	as the attribute's single argument.

2020-07-10  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md  (VSX_MM): New define_mode_iterator.
	(VSX_MM4): New define_mode_iterator.
	(vec_mtvsrbmi): New define_insn.
	(vec_mtvsr_<mode>): New define_insn.
	(vec_cntmb_<mode>): New define_insn.
	(vec_extract_<mode>): New define_insn.
	(vec_expand_<mode>): New define_insn.
	(define_c_enum unspec): Add entries UNSPEC_MTVSBM, UNSPEC_VCNTMB,
	UNSPEC_VEXTRACT, UNSPEC_VEXPAND.
	* config/rs6000/altivec.h ( vec_genbm, vec_genhm, vec_genwm,
	vec_gendm, vec_genqm, vec_cntm, vec_expandm, vec_extractm): Add
	defines.
	* config/rs6000/rs6000-builtin.def: Add defines BU_P10_2, BU_P10_1.
	(BU_P10_1): Add definitions for mtvsrbm, mtvsrhm, mtvsrwm,
	mtvsrdm, mtvsrqm, vexpandmb, vexpandmh, vexpandmw, vexpandmd,
	vexpandmq, vextractmb, vextractmh, vextractmw, vextractmd, vextractmq.
	(BU_P10_2): Add definitions for cntmbb, cntmbh, cntmbw, cntmbd.
	(BU_P10_OVERLOAD_1): Add definitions for mtvsrbm, mtvsrhm,
	mtvsrwm, mtvsrdm, mtvsrqm, vexpandm, vextractm.
	(BU_P10_OVERLOAD_2): Add defition for cntm.
	* config/rs6000/rs6000-call.c (rs6000_expand_binop_builtin): Add
	checks for CODE_FOR_vec_cntmbb_v16qi, CODE_FOR_vec_cntmb_v8hi,
	CODE_FOR_vec_cntmb_v4si, CODE_FOR_vec_cntmb_v2di.
	(altivec_overloaded_builtins): Add overloaded argument entries for
	P10_BUILTIN_VEC_MTVSRBM, P10_BUILTIN_VEC_MTVSRHM,
	P10_BUILTIN_VEC_MTVSRWM, P10_BUILTIN_VEC_MTVSRDM,
	P10_BUILTIN_VEC_MTVSRQM, P10_BUILTIN_VEC_VCNTMBB,
	P10_BUILTIN_VCNTMBB, P10_BUILTIN_VCNTMBH,
	P10_BUILTIN_VCNTMBW, P10_BUILTIN_VCNTMBD,
	P10_BUILTIN_VEXPANDMB, P10_BUILTIN_VEXPANDMH,
	P10_BUILTIN_VEXPANDMW, P10_BUILTIN_VEXPANDMD,
	P10_BUILTIN_VEXPANDMQ, P10_BUILTIN_VEXTRACTMB,
	P10_BUILTIN_VEXTRACTMH, P10_BUILTIN_VEXTRACTMW,
	P10_BUILTIN_VEXTRACTMD, P10_BUILTIN_VEXTRACTMQ.
	(builtin_function_type): Add case entries for P10_BUILTIN_MTVSRBM,
	P10_BUILTIN_MTVSRHM, P10_BUILTIN_MTVSRWM, P10_BUILTIN_MTVSRDM,
	P10_BUILTIN_MTVSRQM, P10_BUILTIN_VCNTMBB, P10_BUILTIN_VCNTMBH,
	P10_BUILTIN_VCNTMBW, P10_BUILTIN_VCNTMBD,
	P10_BUILTIN_VEXPANDMB, P10_BUILTIN_VEXPANDMH,
	P10_BUILTIN_VEXPANDMW, P10_BUILTIN_VEXPANDMD,
	P10_BUILTIN_VEXPANDMQ.
	* config/rs6000/rs6000-builtin.def (altivec_overloaded_builtins): Add
	entries	for MTVSRBM, MTVSRHM, MTVSRWM, MTVSRDM, MTVSRQM, VCNTM,
	VEXPANDM, VEXTRACTM.

2020-07-10  Bill Seurer, 507-253-3502, seurer@us.ibm.com  <(no_default)>

	PR target/95581
	* config/rs6000/rs6000-call.c: Add new type v16qi_ftype_pcvoid.
	(altivec_init_builtins) Change __builtin_altivec_mask_for_load to use
	v16qi_ftype_pcvoid with correct number of parameters.

2020-07-10  H.J. Lu  <hjl.tools@gmail.com>

	PR target/96144
	* config/i386/i386-expand.c (ix86_emit_swsqrtsf): Check
	TARGET_AVX512VL when enabling FMA.

2020-07-10  Andrea Corallo  <andrea.corallo@arm.com>
	    Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Iain Apreotesei  <iain.apreotesei@arm.com>

	* config/arm/arm-protos.h (arm_target_insn_ok_for_lob): New
	prototype.
	* config/arm/arm.c (TARGET_INVALID_WITHIN_DOLOOP): Define.
	(arm_invalid_within_doloop): Implement invalid_within_doloop hook.
	(arm_target_insn_ok_for_lob): New function.
	* config/arm/arm.h (TARGET_HAVE_LOB): Define macro.
	* config/arm/thumb2.md (*doloop_end_internal, doloop_begin)
	(dls_insn): Add new patterns.
	(doloop_end): Modify to select LR when LOB is available.
	* config/arm/unspecs.md: Add new unspec.
	* doc/sourcebuild.texi (arm_v8_1_lob_ok)
	(arm_thumb2_ok_no_arm_v8_1_lob): Document new target supports
	options.

2020-07-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96133
	* gimple-fold.c (fold_array_ctor_reference): Do not
	recurse to folding a CTOR that does not fully cover the
	asked for object.

2020-07-10  Cui,Lili  <lili.cui@intel.com>

	* common/config/i386/cpuinfo.h
	(get_intel_cpu): Handle sapphirerapids.
	* common/config/i386/i386-common.c
	(processor_names): Add sapphirerapids and alderlake.
	(processor_alias_table): Add sapphirerapids and alderlake.
	* common/config/i386/i386-cpuinfo.h
	(processor_subtypes): Add INTEL_COREI7_ALDERLAKE and
	INTEL_COREI7_ALDERLAKE.
	* config.gcc: Add -march=sapphirerapids and alderlake.
	* config/i386/driver-i386.c
	(host_detect_local_cpu) Handle sapphirerapids and alderlake.
	* config/i386/i386-c.c
	(ix86_target_macros_internal): Handle sapphirerapids and alderlake.
	* config/i386/i386-options.c
	(m_SAPPHIRERAPIDS) : Define.
	(m_ALDERLAKE): Ditto.
	(m_CORE_AVX512) : Add m_SAPPHIRERAPIDS.
	(processor_cost_table): Add sapphirerapids and alderlake.
	(ix86_option_override_internal) Handle PTA_WAITPKG, PTA_ENQCMD,
	PTA_CLDEMOTE, PTA_SERIALIZE, PTA_TSXLDTRK.
	* config/i386/i386.h
	(ix86_size_cost) : Define SAPPHIRERAPIDS and ALDERLAKE.
	(processor_type) : Add PROCESSOR_SAPPHIRERAPIDS and
	PROCESSOR_ALDERLAKE.
	(PTA_ENQCMD): New.
	(PTA_CLDEMOTE): Ditto.
	(PTA_SERIALIZE): Ditto.
	(PTA_TSXLDTRK): New.
	(PTA_SAPPHIRERAPIDS): Ditto.
	(PTA_ALDERLAKE): Ditto.
	(processor_type) : Add PROCESSOR_SAPPHIRERAPIDS and
	PROCESSOR_ALDERLAKE.
	* doc/extend.texi: Add sapphirerapids and alderlake.
	* doc/invoke.texi: Add sapphirerapids and alderlake.

2020-07-10  Martin Liska  <mliska@suse.cz>

	* dumpfile.c [profile-report]: Add new profile dump.
	* dumpfile.h (enum tree_dump_index): Ad TDI_profile_report.
	* passes.c (pass_manager::dump_profile_report): Change stderr
	to dump_file.

2020-07-10  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-loop.c (vect_transform_loop): Use LOOP_VINFO_NITERS which
	is adjusted by considering peeled prologue for non
	vect_use_loop_mask_for_alignment_p cases.

2020-07-09  Peter Bergner  <bergner@linux.ibm.com>

	PR target/96125
	* config/rs6000/rs6000-call.c (rs6000_init_builtins): Define the MMA
	specific types __vector_quad and __vector_pair, and initialize the
	MMA built-ins if TARGET_EXTRA_BUILTINS is set.
	(mma_init_builtins): Don't test for mask set in rs6000_builtin_mask.
	Remove now unneeded mask variable.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Add the
	OPTION_MASK_MMA flag for power10 if not already set.

2020-07-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96133
	* tree-vect-slp.c (vect_build_slp_tree_1): Compare load_p
	status between stmts.

2020-07-09  H.J. Lu  <hjl.tools@gmail.com>

	PR target/88713
	* config/i386/i386-expand.c (ix86_emit_swsqrtsf): Enable FMA.
	* config/i386/sse.md (VF_AVX512VL_VF1_128_256): New.
	(rsqrt<mode>2): Replace VF1_128_256 with VF_AVX512VL_VF1_128_256.
	(rsqrtv16sf2): Removed.

2020-07-09  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_verify_datarefs_alignment): Remove.
	(vect_slp_analyze_and_verify_instance_alignment): Rename to ...
	(vect_slp_analyze_instance_alignment): ... this.
	* tree-vect-data-refs.c (verify_data_ref_alignment): Remove.
	(vect_verify_datarefs_alignment): Likewise.
	(vect_enhance_data_refs_alignment): Do not call
	vect_verify_datarefs_alignment.
	(vect_slp_analyze_node_alignment): Rename from
	vect_slp_analyze_and_verify_node_alignment and do not
	call verify_data_ref_alignment.
	(vect_slp_analyze_instance_alignment): Rename from
	vect_slp_analyze_and_verify_instance_alignment.
	* tree-vect-stmts.c (vectorizable_store): Dump when
	we vectorize an unaligned access.
	(vectorizable_load): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Do not call
	vect_verify_datarefs_alignment.
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Adjust.

2020-07-09  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/95804
	* tree-loop-distribution.c (break_alias_scc_partitions): Force
	negative post order to reduction partition.

2020-07-09  Jakub Jelinek  <jakub@redhat.com>

	* omp-general.h (struct omp_for_data): Add min_inner_iterations
	and factor members.
	* omp-general.c (omp_extract_for_data): Initialize them and remember
	them in OMP_CLAUSE_COLLAPSE_COUNT if needed and restore from there.
	* omp-expand.c (expand_omp_for_init_counts): Fix up computation of
	counts[fd->last_nonrect] if fd->loop.n2 is INTEGER_CST.
	(expand_omp_for_init_vars): For
	fd->first_nonrect + 1 == fd->last_nonrect loops with for now
	INTEGER_CST fd->loop.n2 find quadratic equation roots instead of
	using fallback method when possible.

2020-07-09  Omar Tahir  <omar.tahir@arm.com>

	* ira.c (move_unallocated_pseudos): Zero first_moveable_pseudo and
	last_moveable_pseudo before returning.

2020-07-09  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Add
	__ARM_FEATURE_BTI_DEFAULT support.

2020-07-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_indirect_call_asm):
	New declaration.
	* config/aarch64/aarch64.c (aarch64_regno_regclass): Handle new
	stub registers class.
	(aarch64_class_max_nregs): Likewise.
	(aarch64_register_move_cost): Likewise.
	(aarch64_sls_shared_thunks): Global array to store stub labels.
	(aarch64_sls_emit_function_stub): New.
	(aarch64_create_blr_label): New.
	(aarch64_sls_emit_blr_function_thunks): New.
	(aarch64_sls_emit_shared_blr_thunks): New.
	(aarch64_asm_file_end): New.
	(aarch64_indirect_call_asm): New.
	(TARGET_ASM_FILE_END): Use aarch64_asm_file_end.
	(TARGET_ASM_FUNCTION_EPILOGUE): Use
	aarch64_sls_emit_blr_function_thunks.
	* config/aarch64/aarch64.h (STB_REGNUM_P): New.
	(enum reg_class): Add STUB_REGS class.
	(machine_function): Introduce `call_via` array for
	function-local stub labels.
	* config/aarch64/aarch64.md (*call_insn, *call_value_insn): Use
	aarch64_indirect_call_asm to emit code when hardening BLR
	instructions.
	* config/aarch64/constraints.md (Ucr): New constraint
	representing registers for indirect calls.  Is GENERAL_REGS
	usually, and STUB_REGS when hardening BLR instruction against
	SLS.
	* config/aarch64/predicates.md (aarch64_general_reg): STUB_REGS class
	is also a general register.

2020-07-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sls_barrier): New.
	* config/aarch64/aarch64.c (aarch64_output_casesi): Emit
	speculation barrier after BR instruction if needs be.
	(aarch64_trampoline_init): Handle ptr_mode value & adjust size
	of code copied.
	(aarch64_sls_barrier): New.
	(aarch64_asm_trampoline_template): Add needed barriers.
	* config/aarch64/aarch64.h (AARCH64_ISA_SB): New.
	(TARGET_SB): New.
	(TRAMPOLINE_SIZE): Account for barrier.
	* config/aarch64/aarch64.md (indirect_jump, *casesi_dispatch,
	simple_return, *do_return, *sibcall_insn, *sibcall_value_insn):
	Emit barrier if needs be, also account for possible barrier using
	"sls_length" attribute.
	(sls_length): New attribute.
	(length): Determine default using any non-default sls_length
	value.

2020-07-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_harden_sls_retbr_p):
	New.
	(aarch64_harden_sls_blr_p): New.
	* config/aarch64/aarch64.c (enum aarch64_sls_hardening_type):
	New.
	(aarch64_harden_sls_retbr_p): New.
	(aarch64_harden_sls_blr_p): New.
	(aarch64_validate_sls_mitigation): New.
	(aarch64_override_options): Parse options for SLS mitigation.
	* config/aarch64/aarch64.opt (-mharden-sls): New option.
	* doc/invoke.texi: Document new option.

2020-07-09  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-stmts.c (vectorizable_condition): Prohibit vectorization
	with partial vectors explicitly excepting for EXTRACT_LAST_REDUCTION
	or nested-cycle reduction.

2020-07-09  Kewen Lin  <linkw@linux.ibm.com>

	* tree-vect-loop.c (vect_analyze_loop_2): Update dumping string
	for fully masking to be more common.

2020-07-09  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.md (get_thread_pointer<mode>): New.
	(TP_REGNUM): Ditto.
	* doc/extend.texi (Target Builtins): Add RISC-V built-in section.
	Document __builtin_thread_pointer.

2020-07-09  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-sr.c (riscv_remove_unneeded_save_restore_calls):
	Abort if any arguments on stack.

2020-07-08  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-fold.c (gimple_fold_builtin_memory_op): Do not fold if
	either type has reverse scalar storage order.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Do not propagate through
	a memory copy if either type has reverse scalar storage order.

2020-07-08  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/mkoffload.c (compile_native, main): Pass -fPIC/-fpic
	on to the native compiler, if used.
	* config/nvptx/mkoffload.c (compile_native, main): Likewise.

2020-07-08  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/altivec.h (vec_vmsumudm): New define.
	* config/rs6000/altivec.md (UNSPEC_VMSUMUDM): New unspec.
	  (altivec_vmsumudm): New define_insn.
	* config/rs6000/rs6000-builtin.def (altivec_vmsumudm): New BU_ALTIVEC_3
	  entry. (vmsumudm): New BU_ALTIVEC_OVERLOAD_3 entry.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins): Add entries for
	  ALTIVEC_BUILTIN_VMSUMUDM variants of vec_msum.
	* doc/extend.texi: Add document for vmsumudm behind vmsum.

2020-07-08  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (get_group_load_store_type): Pass
	in the SLP node and the alignment support scheme output.
	Set that.
	(get_load_store_type): Likewise.
	(vectorizable_store): Adjust.
	(vectorizable_load): Likewise.

2020-07-08  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/95694
	* expr.c (expand_expr_real_2): Get the mode from the type rather
	than the rtx, and assert that it is consistent with the mode of
	the rtx (where known).  Optimize all constant integers, not just
	those that can be represented in poly_int64.

2020-07-08  Kewen Lin  <linkw@linux.ibm.com>

	* config/rs6000/vsx.md (len_load_v16qi): New define_expand.
	(len_store_v16qi): Likewise.

2020-07-08  Kewen Lin  <linkw@linux.ibm.com>

	* doc/md.texi (len_load_@var{m}): Document.
	(len_store_@var{m}): Likewise.
	* internal-fn.c (len_load_direct): New macro.
	(len_store_direct): Likewise.
	(expand_len_load_optab_fn): Likewise.
	(expand_len_store_optab_fn): Likewise.
	(direct_len_load_optab_supported_p): Likewise.
	(direct_len_store_optab_supported_p): Likewise.
	(expand_mask_load_optab_fn): New macro.  Original renamed to ...
	(expand_partial_load_optab_fn): ... here.  Add handlings for
	len_load_optab.
	(expand_mask_store_optab_fn): New macro.  Original renamed to ...
	(expand_partial_store_optab_fn): ... here. Add handlings for
	len_store_optab.
	(internal_load_fn_p): Handle IFN_LEN_LOAD.
	(internal_store_fn_p): Handle IFN_LEN_STORE.
	(internal_fn_stored_value_index): Handle IFN_LEN_STORE.
	* internal-fn.def (LEN_LOAD): New internal function.
	(LEN_STORE): Likewise.
	* optabs.def (len_load_optab, len_store_optab): New optab.

2020-07-07  Anton Youdkevitch  <anton.youdkevitch@bell-sw.com>

	* config/aarch64/aarch64.c (thunderx2t99_regmove_cost,
	thunderx2t99_vector_cost): Likewise.

2020-07-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Fix
	group overlap condition to allow negative step DR groups.
	* tree-vect-stmts.c (get_group_load_store_type): For
	multi element SLP groups force VMAT_STRIDED_SLP when the step
	is negative.

2020-07-07  Qian Jianhua  <qianjh@cn.fujitsu.com>

	* doc/generic.texi: Fix typo.

2020-07-07  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (cmp_symbol_files): Use the computed
	order map to sort symbols from the same sub-file together.
	(lto_output): Compute a map of sub-file to an order number
	it appears in the symbol output array.

2020-07-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96075
	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Use
	TYPE_SIZE_UNIT of the vector component type instead of DR_STEP
	for the misalignment calculation for negative step.

2020-07-06  Roger Sayle  <roger@nextmovesoftware.com>

	* config/nvptx/nvptx.md (*vadd_addsi4): New instruction.
	(*vsub_addsi4): New instruction.

2020-07-06  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.md (movulsr): New peephole2.

2020-07-06  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/sync.md ("cris_atomic_fetch_<atomic_op_name><mode>_1"):
	Correct gcc_assert of overlapping operands.

2020-07-05  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.c (cris_select_cc_mode): Always return
	CC_NZmode for matching comparisons.  Clarify comments.
	* config/cris/cris-modes.def: Clarify mode comment.
	* config/cris/cris.md (plusminus, plusminusumin, plusumin): New
	code iterators.
	(addsub, addsubbo, nd): New code iterator attributes.
	("*<addsub><su>qihi"): Rename from "*extopqihi".  Use code
	iterator constructs instead of match_operator constructs.
	("*<addsubbo><su><nd><mode>si<setnz>"): Similar from
	"*extop<mode>si<setnz>".
	("*add<su>qihi_swap"): Similar from "*addxqihi_swap".
	("*<addsubbo><su><nd><mode>si<setnz>_swap"): Similar from
	"*extop<mode>si<setnz>_swap".

2020-07-05  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.md ("*extopqihi", "*extop<mode>si<setnz>_swap")
	("*extop<mode>si<setnz>", "*addxqihi_swap"): Reinstate.

2020-07-03  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-fold.c (gimple_fold_builtin_memory_op): Fold calls that
	were initially created for the assignment of a variable-sized
	object and whose source is now a string constant.
	* gimple-ssa-store-merging.c (struct merged_store_group): Document
	STRING_CST for rhs_code field.
	Add string_concatenation boolean field.
	(merged_store_group::merged_store_group): Initialize it as well as
	bit_insertion here.
	(merged_store_group::do_merge): Set it upon seeing a STRING_CST.
	Also set bit_insertion here upon seeing a BIT_INSERT_EXPR.
	(merged_store_group::apply_stores): Clear it for small regions.
	Do not create a power-of-2-sized buffer if it is still true.
	And do not set bit_insertion here again.
	(encode_tree_to_bitpos): Deal with BLKmode for the expression.
	(merged_store_group::can_be_merged_into): Deal with STRING_CST.
	(imm_store_chain_info::coalesce_immediate_stores): Set bit_insertion
	to true after changing MEM_REF stores into BIT_INSERT_EXPR stores.
	(count_multiple_uses): Return 0 for STRING_CST.
	(split_group): Do not split the group for a string concatenation.
	(imm_store_chain_info::output_merged_store): Constify and rename
	some local variables.  Build an array type as destination type
	for a string concatenation, as well as a zero mask, and call
	build_string to build the source.
	(lhs_valid_for_store_merging_p): Return true for VIEW_CONVERT_EXPR.
	(pass_store_merging::process_store): Accept STRING_CST on the RHS.
	* gimple.h (gimple_call_alloca_for_var_p): New accessor function.
	* gimplify.c (gimplify_modify_expr_to_memcpy): Set alloca_for_var.
	* tree.h (CALL_ALLOCA_FOR_VAR_P): Document it for BUILT_IN_MEMCPY.

2020-07-03  Martin Jambor  <mjambor@suse.cz>

	PR ipa/96040
	* ipa-sra.c (all_callee_accesses_present_p): Do not accept type
	mismatched accesses.

2020-07-03  Roger Sayle  <roger@nextmovesoftware.com>

	* config/nvptx/nvptx.md (popcount<mode>2): New instructions.
	(mulhishi3, mulsidi3, umulhisi3, umulsidi3): New instructions.

2020-07-03  Martin Liska  <mliska@suse.cz>
	    Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/96046
	* gcov-dump.c (tag_function): Use gcov_position_t
	type.

2020-07-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96037
	* tree-vect-stmts.c (vect_is_simple_use): Initialize *slp_def.

2020-07-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Cost the
	original non-pattern stmts, look at the pattern stmt
	vectorization status.

2020-07-03  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (fold_left_plus_<mode>): New.

2020-07-03  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vec_info::insert_on_entry): New.
	(vec_info::insert_seq_on_entry): Likewise.
	* tree-vectorizer.c (vec_info::insert_on_entry): Implement.
	(vec_info::insert_seq_on_entry): Likewise.
	* tree-vect-stmts.c (vect_init_vector_1): Use
	vec_info::insert_on_entry.
	(vect_finish_stmt_generation): Set modified bit after
	adjusting VUSE.
	* tree-vect-slp.c (vect_create_constant_vectors): Simplify
	by using vec_info::insert_seq_on_entry and bypassing
	vec_init_vector.
	(vect_schedule_slp_instance): Deal with all-constant
	children later.

2020-07-03  Roger Sayle  <roger@nextmovesoftware.com>
	    Tom de Vries  <tdevries@suse.de>

	PR target/90932
	* config/nvptx/nvptx.c (nvptx_vector_alignment): Use tree_to_uhwi
	to access TYPE_SIZE (type).  Return at least the mode's alignment.

2020-07-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96028
	* tree-vect-slp.c (vect_slp_convert_to_external): Make sure
	we have scalar stmts to use.
	(vect_slp_analyze_node_operations): When analyzing a child
	failed try externalizing the parent node.

2020-07-02  Martin Jambor  <mjambor@suse.cz>

	PR debug/95343
	* ipa-param-manipulation.c (ipa_param_adjustments::modify_call): Adjust
	argument index if necessary.

2020-07-02  Martin Liska  <mliska@suse.cz>

	PR middle-end/95830
	* tree-vect-generic.c (expand_vector_condition): Forward declaration.
	(expand_vector_comparison): Do not expand a comparison if all
	uses are consumed by a VEC_COND_EXPR.
	(expand_vector_operation): Change void return type to bool.
	(expand_vector_operations_1): Pass dce_ssa_names.

2020-07-02  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR bootstrap/95700
	* system.h (NULL): Redefine to nullptr.

2020-07-02  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/95857
	* tree-cfg.c (group_case_labels_stmt): When removing an unreachable
	base_bb, remember all forced and non-local labels on it and later
	treat those as if they have NULL label_to_block.  Formatting fix.
	Fix a comment typo.

2020-07-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/96022
	* tree-vect-stmts.c (vectorizable_shift): Only use the
	first vector stmt when extracting the scalar shift amount.
	* tree-vect-slp.c (vect_build_slp_tree_2): Also build unary
	nodes with all-scalar children from scalars but not stores.
	(vect_analyze_slp_instance): Mark the node not failed.

2020-07-02  Felix Yang  <felix.yang@huawei.com>

	PR tree-optimization/95961
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Use the
	number of scalars instead of the number of vectors as an upper bound
	for the loop saving info about DR in the hash table.  Remove unused
	local variables.

2020-07-02  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (expand_omp_for): Diagnose non-rectangular loops with
	invalid steps - ((m2 - m1) * incr_outer) % incr must be 0 in valid
	OpenMP non-rectangular loops.  Use XALLOCAVEC.

2020-07-02  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/95348
	* coverage.c (read_counts_file): Read only COUNTERS that are
	not all-zero.
	* gcov-dump.c (tag_function): Change signature from unsigned to
	signed integer.
	(tag_blocks): Likewise.
	(tag_arcs): Likewise.
	(tag_lines): Likewise.
	(tag_counters): Likewise.
	(tag_summary): Likewise.
	* gcov.c (read_count_file): Read all non-zero counters
	sensitively.

2020-07-02  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator (arch_canonicalize): Handle
	multi-letter extension.
	Using underline as separator between different extensions.

2020-07-01  Pip Cet  <pipcet@gmail.com>

	* spellcheck.c (test_data): Add problematic strings.
	(test_metric_conditions): Don't test the triangle inequality
	condition, which our distance function does not satisfy.

2020-07-01  Omar Tahir  <omar.tahir@arm.com>

	* config/aarch64/aarch64.c (aarch64_asm_trampoline_template): Always
	generate a BTI instruction.

2020-07-01  Jeff Law  <law@redhat.com>

	PR tree-optimization/94882
	* match.pd (x & y) - (x | y) - 1 -> ~(x ^ y): New simplification.

2020-07-01  Jeff Law  <law@redhat.com>

	* config/m68k/m68k.c (m68k_output_btst): Drop "register" keyword.
	(emit_move_sequence, output_iorsi3, output_xorsi3): Likewise.

2020-07-01  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_builtins): Add enums
	for 64bits fpsr/fpcr getter setters builtin variants.
	(aarch64_init_fpsr_fpcr_builtins): New function.
	(aarch64_general_init_builtins): Modify to make use of the later.
	(aarch64_expand_fpsr_fpcr_setter): New function.
	(aarch64_general_expand_builtin): Modify to make use of the later.
	* config/aarch64/aarch64.md (@aarch64_set_<fpscr_name><GPI:mode>)
	(@aarch64_get_<fpscr_name><GPI:mode>): New patterns replacing and
	generalizing 'get_fpcr', 'set_fpsr'.
	* config/aarch64/iterators.md (GET_FPSCR, SET_FPSCR): New int
	iterators.
	(fpscr_name): New int attribute.
	* doc/extend.texi (__builtin_aarch64_get_fpcr64)
	(__builtin_aarch64_set_fpcr64, __builtin_aarch64_get_fpsr64)
	(__builtin_aarch64_set_fpsr64): Add into AArch64 Built-in
	Functions.

2020-07-01  Martin Liska  <mliska@suse.cz>

	* gcov.c (print_usage): Avoid trailing space for -j option.

2020-07-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95839
	* tree-vect-slp.c (vect_slp_tree_uniform_p): Pre-existing
	vectors are not uniform.
	(vect_build_slp_tree_1): Handle BIT_FIELD_REFs of
	vector registers.
	(vect_build_slp_tree_2): For groups of lane extracts
	from a vector register generate a permute node
	with a special child representing the pre-existing vector.
	(vect_prologue_cost_for_slp): Pre-existing vectors cost nothing.
	(vect_slp_analyze_node_operations): Use SLP_TREE_LANES.
	(vectorizable_slp_permutation): Do not generate or cost identity
	permutes.
	(vect_schedule_slp_instance): Handle pre-existing vector
	that are function arguments.

2020-07-01  Richard Biener  <rguenther@suse.de>

	* system.h (INCLUDE_ISL): New guarded include.
	* graphite-dependences.c: Use it.
	* graphite-isl-ast-to-gimple.c: Likewise.
	* graphite-optimize-isl.c: Likewise.
	* graphite-poly.c: Likewise.
	* graphite-scop-detection.c: Likewise.
	* graphite-sese-to-poly.c: Likewise.
	* graphite.c: Likewise.
	* graphite.h: Drop the includes here.

2020-07-01  Martin Liska  <mliska@suse.cz>

	* gcov.c (print_usage): Shorted option description for -j
	option.

2020-07-01  Martin Liska  <mliska@suse.cz>

	* doc/gcov.texi: Rename 2 options.
	* gcov.c (print_usage): Rename -i,--json-format to
	-j,--json-format and -j,--human-readable to -H,--human-readable.
	(process_args): Fix up parsing.  Document obsolete options and
	how are they changed.

2020-07-01  Jeff Law  <law@redhat.com>

	* config/pa/pa.c (pa_emit_move_sequence): Drop register keyword.
	(pa_output_ascii): Likewise.

2020-07-01  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_subset_t): New field
	added.
	(riscv_subset_list::parsing_subset_version): Add parameter for
	indicate explicitly version, and handle explicitly version.
	(riscv_subset_list::handle_implied_ext): Ditto.
	(riscv_subset_list::add): Ditto.
	(riscv_subset_t::riscv_subset_t): Init new field.
	(riscv_subset_list::to_string): Always output version info if version
	explicitly specified.
	(riscv_subset_list::parsing_subset_version): Handle explicitly
	arch version.
	(riscv_subset_list::parse_std_ext): Ditto.
	(riscv_subset_list::parse_multiletter_ext): Ditto.

2020-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/92789
	PR target/95726
	* config/aarch64/aarch64.c (aarch64_attribute_table): Add
	"Advanced SIMD type".
	(aarch64_comp_type_attributes): Check that the "Advanced SIMD type"
	attributes are equal.
	* config/aarch64/aarch64-builtins.c: Include stringpool.h and
	attribs.h.
	(aarch64_mangle_builtin_vector_type): Use the mangling recorded
	in the "Advanced SIMD type" attribute.
	(aarch64_init_simd_builtin_types): Add an "Advanced SIMD type"
	attribute to each Advanced SIMD type, using the mangled type
	as the attribute's single argument.

2020-06-30  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/94743
	* config/arm/arm.c (arm_handle_isr_attribute): Warn if
	-mgeneral-regs-only is not used.

2020-06-30  Yang Yang  <yangyang305@huawei.com>

	PR tree-optimization/95855
	* gimple-ssa-split-paths.c (is_feasible_trace): Add extra
	checks to recognize a missed if-conversion opportunity when
	judging whether to duplicate a block.

2020-06-29  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/extend.texi: Change references to "future architecture" to
	"ISA 3.1", "-mcpu=future" to "-mcpu=power10", and remove vaguer
	references to "future" (because the future is now).

2020-06-29  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (isa): Rename "fut" to "p10".

2020-06-29  Roger Sayle  <roger@nextmovesoftware.com>

	* simplify-rtx.c (simplify_distributive_operation): New function
	to un-distribute a binary operation of two binary operations.
	(X & C) ^ (Y & C) to (X ^ Y) & C, when C is simple (i.e. a constant).
	(simplify_binary_operation_1) <IOR, XOR, AND>: Call it from here
	when appropriate.
	(test_scalar_int_ops): New function for unit self-testing
	scalar integer transformations in simplify-rtx.c.
	(test_scalar_ops): Call test_scalar_int_ops for each integer mode.
	(simplify_rtx_c_tests): Call test_scalar_ops.

2020-06-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95916
	* tree-vect-slp.c (vect_schedule_slp_instance): Explicitely handle
	the case of not vectorized externals.

2020-06-29  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h: Do not include <utility>.

2020-06-29  Martin Liska  <mliska@suse.cz>

	* tree-ssa-ccp.c (gsi_prev_dom_bb_nondebug): Use gsi_bb
	instead of gimple_stmt_iterator::bb.
	* tree-ssa-math-opts.c (insert_reciprocals): Likewise.
	* tree-vectorizer.h: Likewise.

2020-06-29  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-hsa.h (DBX_REGISTER_NUMBER): New macro.
	* config/gcn/gcn-protos.h (gcn_dwarf_register_number): New prototype.
	* config/gcn/gcn.c (gcn_expand_prologue): Add RTX_FRAME_RELATED_P
	and REG_FRAME_RELATED_EXPR to stack and frame pointer adjustments.
	(gcn_dwarf_register_number): New function.
	(gcn_dwarf_register_span): New function.
	(TARGET_DWARF_REGISTER_SPAN): New hook macro.

2020-06-29  Kaipeng Zhou  <zhoukaipeng3@huawei.com>

	PR tree-optimization/95854
	* gimple-ssa-store-merging.c (find_bswap_or_nop_1): Return NULL
	if operand 1 or 2 of a BIT_FIELD_REF cannot be converted to
	unsigned HOST_WIDE_INT.

2020-06-29  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sparc/sparc.c (epilogue_renumber): Remove register.
	(sparc_print_operand_address): Likewise.
	(sparc_type_code): Likewise.
	(set_extends): Likewise.

2020-06-29  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* optc-save-gen.awk: Add exceptions for arc target.

2020-06-29  Frederik Harwath  <frederik@codesourcery.com>

	* doc/sourcebuild.texi: Describe globbing of the
	dump file scanning commands "suffix" argument.

2020-06-28  Martin Sebor  <msebor@redhat.com>

	PR c++/86568
	* calls.c (maybe_warn_rdwr_sizes): Use location of argument if
	available.
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Same.  Adjust
	indentation.
	* tree.c (get_nonnull_args): Consider the this pointer implicitly
	nonnull.
	* var-tracking.c (deps_vec): New type.
	(var_loc_dep_vec): New function.
	(VAR_LOC_DEP_VEC): Use it.

2020-06-28  Kewen Lin  <linkw@linux.ibm.com>

	* internal-fn.c (direct_mask_load_optab_supported_p): Use
	convert_optab_supported_p instead of direct_optab_supported_p.
	(direct_mask_store_optab_supported_p): Likewise.

2020-06-27  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-evrp-analyze.h (vrp_visit_cond_stmt): Use
	simplify_using_ranges class.
	* gimple-ssa-evrp.c (class evrp_folder): New simplify_using_ranges
	field.  Adjust all methods to use new field.
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Use
	simplify_using_ranges class.
	* tree-vrp.c (class vrp_folder): New simplify_using_ranges
	field.  Adjust all methods to use new field.
	(simplify_stmt_for_jump_threading): Use simplify_using_ranges class.
	(vrp_prop::vrp_finalize): New vrp_folder argument.
	(execute_vrp): Pass folder to vrp_finalize.  Use
	simplify_using_ranges class.
	Remove cleanup_edges_and_switches call.
	* vr-values.c (vr_values::op_with_boolean_value_range_p): Change
	value_range_equiv uses to value_range.
	(simplify_using_ranges::op_with_boolean_value_range_p): Use
	simplify_using_ranges class.
	(check_for_binary_op_overflow): Make static.
	(vr_values::extract_range_basic): Pass this to
	check_for_binary_op_overflow.
	(compare_range_with_value): Change value_range_equiv uses to
	value_range.
	(vr_values::vr_values): Initialize simplifier field.
	Remove uses of to_remove_edges and to_update_switch_stmts.
	(vr_values::~vr_values): Remove uses of to_remove_edges and
	to_update_switch_stmts.
	(vr_values::get_vr_for_comparison): Move to simplify_using_ranges
	class.
	(vr_values::compare_name_with_value): Same.
	(vr_values::compare_names): Same.
	(vr_values::vrp_evaluate_conditional_warnv_with_ops): Same.
	(vr_values::vrp_evaluate_conditional): Same.
	(vr_values::vrp_visit_cond_stmt): Same.
	(find_case_label_ranges): Change value_range_equiv uses to
	value_range.
	(vr_values::extract_range_from_stmt): Use simplify_using_ranges class.
	(vr_values::simplify_truth_ops_using_ranges): Move to
	simplify_using_ranges class.
	(vr_values::simplify_div_or_mod_using_ranges): Same.
	(vr_values::simplify_min_or_max_using_ranges): Same.
	(vr_values::simplify_abs_using_ranges): Same.
	(vr_values::simplify_bit_ops_using_ranges): Same.
	(test_for_singularity): Change value_range_equiv uses to
	value_range.
	(range_fits_type_p): Same.
	(vr_values::simplify_cond_using_ranges_1): Same.
	(vr_values::simplify_cond_using_ranges_2): Make extern.
	(vr_values::fold_cond): Move to simplify_using_ranges class.
	(vr_values::simplify_switch_using_ranges): Same.
	(vr_values::cleanup_edges_and_switches): Same.
	(vr_values::simplify_float_conversion_using_ranges): Same.
	(vr_values::simplify_internal_call_using_ranges): Same.
	(vr_values::two_valued_val_range_p): Same.
	(vr_values::simplify_stmt_using_ranges): Move to...
	(simplify_using_ranges::simplify): ...here.
	* vr-values.h (class vr_values): Move all the simplification of
	statements using ranges methods and code from here...
	(class simplify_using_ranges): ...to here.
	(simplify_cond_using_ranges_2): New extern prototype.

2020-06-27  Jakub Jelinek  <jakub@redhat.com>

	* omp-general.h (struct omp_for_data_loop): Add non_rect_referenced
	member, move outer member.
	(struct omp_for_data): Add first_nonrect and last_nonrect members.
	* omp-general.c (omp_extract_for_data): Initialize first_nonrect,
	last_nonrect and non_rect_referenced members.
	* omp-expand.c (expand_omp_for_init_counts): Handle non-rectangular
	loops.
	(expand_omp_for_init_vars): Add nonrect_bounds parameter.  Handle
	non-rectangular loops.
	(extract_omp_for_update_vars): Likewise.
	(expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk, expand_omp_simd,
	expand_omp_taskloop_for_outer, expand_omp_taskloop_for_inner): Adjust
	expand_omp_for_init_vars and extract_omp_for_update_vars callers.
	(expand_omp_for): Don't sorry on non-composite worksharing-loop or
	distribute.

2020-06-26  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95655
	* config/i386/gnu-user.h (SUBTARGET_FRAME_POINTER_REQUIRED):
	Removed.
	* config/i386/i386.c (ix86_frame_pointer_required): Update
	comments.

2020-06-26  Yichao Yu  <yyc1992@gmail.com>

	* multiple_target.c (redirect_to_specific_clone): Fix tests
	to check individual attribute rather than an attribute list.

2020-06-26  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/rs6000-call.c (cpu_is_info) <power10>: New.
	* doc/extend.texi (PowerPC Built-in Functions): Document power10,
	arch_3_1 and mma.

2020-06-26  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi (C Dialect Options): Adjust -std default for C++.
	* doc/standards.texi (C Language): Correct the default dialect.
	(C++ Language): Update the default for C++ to gnu++17.

2020-06-26  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-reassoc.c (dump_range_entry): New function.
	(debug_range_entry): New debug function.
	(update_range_test): Invoke dump_range_entry for dumping.
	(optimize_range_tests_to_bit_test): Merge the entry test in the
	bit test when possible and lower the profitability threshold.

2020-06-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95897
	* tree-vectorizer.h (vectorizable_induction): Remove
	unused gimple_stmt_iterator * parameter.
	* tree-vect-loop.c (vectorizable_induction): Likewise.
	(vect_analyze_loop_operations): Adjust.
	* tree-vect-stmts.c (vect_analyze_stmt): Likewise.
	(vect_transform_stmt): Likewise.
	* tree-vect-slp.c (vect_schedule_slp_instance): Adjust
	for fold-left reductions, clarify existing reduction case.

2020-06-25  Nick Clifton  <nickc@redhat.com>

	* config/m32r/m32r.md (movsicc): Disable pattern.

2020-06-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95839
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Remove premature
	check on the number of datarefs.

2020-06-25  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000-call.c (mma_init_builtins): Cast
	the insn_data n_operands value to unsigned.

2020-06-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_schedule_slp_instance): Always use
	vector defs to determine insertion place.

2020-06-25  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95874
	* config/i386/i386.h (PTA_ICELAKE_CLIENT): Remove PTA_CLWB.
	(PTA_ICELAKE_SERVER): Add PTA_CLWB.
	(PTA_TIGERLAKE): Add PTA_CLWB.

2020-06-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95866
	* tree-vect-stmts.c (vectorizable_shift): Reject incompatible
	vectorized shift operands.  For scalar shifts use lane zero
	of a vectorized shift operand.

2020-06-25  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/95745
	PR middle-end/95830
	* gimple-isel.cc (gimple_expand_vec_cond_exprs): Delete dead
	SSA_NAMEs used as the first argument of a VEC_COND_EXPR.  Always
	return 0.
	* tree-vect-generic.c (expand_vector_condition): Remove dead
	SSA_NAMEs used as the first argument of a VEC_COND_EXPR.

2020-06-24  Will Schmidt  <will_schmidt@vnet.ibm.com>

	PR target/94954
	* config/rs6000/altivec.h (vec_pack_to_short_fp32): Update.
	* config/rs6000/altivec.md (UNSPEC_CONVERT_4F32_8F16): New unspec.
	(convert_4f32_8f16): New define_expand
	* config/rs6000/rs6000-builtin.def (convert_4f32_8f16): New builtin define
	and overload.
	* config/rs6000/rs6000-call.c (P9V_BUILTIN_VEC_CONVERT_4F32_8F16): New
	overloaded builtin entry.
	* config/rs6000/vsx.md (UNSPEC_VSX_XVCVSPHP): New unspec.
	(vsx_xvcvsphp): New define_insn.

2020-06-24  Roger Sayle  <roger@nextmovesoftware.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	* simplify-rtx.c (simplify_unary_operation_1): Simplify rotates by 0.

2020-06-24  Roger Sayle  <roger@nextmovesoftware.com>

	* simplify-rtx.c (simplify_unary_operation_1): Simplify
	(parity (parity x)) as (parity x), i.e. PARITY is idempotent.

2020-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95866
	* tree-vect-slp.c (vect_slp_tree_uniform_p): New.
	(vect_build_slp_tree_2): Properly reset matches[0],
	ignore uniform constants.

2020-06-24  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95660
	* common/config/i386/cpuinfo.h (get_intel_cpu): Remove brand_id.
	(cpu_indicator_init): Likewise.
	* config/i386/driver-i386.c (host_detect_local_cpu): Updated.

2020-06-24  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95774
	* common/config/i386/cpuinfo.h (get_intel_cpu): Add Cooper Lake
	detection with AVX512BF16.

2020-06-24  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95843
	* common/config/i386/i386-isas.h: New file.  Extracted from
	gcc/config/i386/i386-builtins.c.
	(_isa_names_table): Add option.
	(ISA_NAMES_TABLE_START): New.
	(ISA_NAMES_TABLE_END): Likewise.
	(ISA_NAMES_TABLE_ENTRY): Likewise.
	(isa_names_table): Defined with ISA_NAMES_TABLE_START,
	ISA_NAMES_TABLE_END and ISA_NAMES_TABLE_ENTRY.  Add more ISAs
	from enum processor_features.
	* config/i386/driver-i386.c: Include
	"common/config/i386/cpuinfo.h" and
	"common/config/i386/i386-isas.h".
	(has_feature): New macro.
	(host_detect_local_cpu): Call cpu_indicator_init to get CPU
	features.  Use has_feature to detect processor features.  Call
	Call get_intel_cpu to get the newer Intel CPU name.  Use
	isa_names_table to generate command-line options.
	* config/i386/i386-builtins.c: Include
	"common/config/i386/i386-isas.h".
	(_arch_names_table): Removed.
	(isa_names_table): Likewise.

2020-06-24  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95259
	* common/config/i386/cpuinfo.h: New file.
	(__processor_model): Moved from libgcc/config/i386/cpuinfo.h.
	(__processor_model2): New.
	(CHECK___builtin_cpu_is): New.  Defined as empty if not defined.
	(has_cpu_feature): New function.
	(set_cpu_feature): Likewise.
	(get_amd_cpu): Moved from libgcc/config/i386/cpuinfo.c.  Use
	CHECK___builtin_cpu_is.  Return AMD CPU name.
	(get_intel_cpu): Moved from libgcc/config/i386/cpuinfo.c.  Use
	Use CHECK___builtin_cpu_is.  Return Intel CPU name.
	(get_available_features): Moved from libgcc/config/i386/cpuinfo.c.
	Also check FEATURE_3DNOW, FEATURE_3DNOWP, FEATURE_ADX,
	FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT, FEATURE_CLWB,
	FEATURE_CLZERO, FEATURE_CMPXCHG16B, FEATURE_CMPXCHG8B,
	FEATURE_ENQCMD, FEATURE_F16C, FEATURE_FSGSBASE, FEATURE_FXSAVE,
	FEATURE_HLE, FEATURE_IBT, FEATURE_LAHF_LM, FEATURE_LM,
	FEATURE_LWP, FEATURE_LZCNT, FEATURE_MOVBE, FEATURE_MOVDIR64B,
	FEATURE_MOVDIRI, FEATURE_MWAITX, FEATURE_OSXSAVE,
	FEATURE_PCONFIG, FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
	FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
	FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
	FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
	FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
	FEATURE_XSAVEOPT and FEATURE_XSAVES
	(cpu_indicator_init): Moved from libgcc/config/i386/cpuinfo.c.
	Also update cpu_model2.
	* common/config/i386/i386-cpuinfo.h (processor_vendor): Add
	Add VENDOR_CENTAUR, VENDOR_CYRIX and VENDOR_NSC.
	(processor_features): Moved from gcc/config/i386/i386-builtins.c.
	Renamed F_XXX to FEATURE_XXX.  Add FEATURE_3DNOW, FEATURE_3DNOWP,
	FEATURE_ADX, FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT,
	FEATURE_CLWB, FEATURE_CLZERO, FEATURE_CMPXCHG16B,
	FEATURE_CMPXCHG8B, FEATURE_ENQCMD, FEATURE_F16C,
	FEATURE_FSGSBASE, FEATURE_FXSAVE, FEATURE_HLE, FEATURE_IBT,
	FEATURE_LAHF_LM, FEATURE_LM, FEATURE_LWP, FEATURE_LZCNT,
	FEATURE_MOVBE, FEATURE_MOVDIR64B, FEATURE_MOVDIRI,
	FEATURE_MWAITX, FEATURE_OSXSAVE, FEATURE_PCONFIG,
	FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
	FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
	FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
	FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
	FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
	FEATURE_XSAVEOPT, FEATURE_XSAVES and CPU_FEATURE_MAX.
	(SIZE_OF_CPU_FEATURES): New.
	* config/i386/i386-builtins.c (processor_features): Removed.
	(isa_names_table): Replace F_XXX with FEATURE_XXX.
	(fold_builtin_cpu): Change __cpu_features2 to an array.

2020-06-24  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95842
	* common/config/i386/i386-common.c (processor_alias_table): Add
	processor model and priority to each entry.
	(pta_size): Updated with -6.
	(num_arch_names): New.
	* common/config/i386/i386-cpuinfo.h: New file.
	* config/i386/i386-builtins.c (feature_priority): Removed.
	(processor_model): Likewise.
	(_arch_names_table): Likewise.
	(arch_names_table): Likewise.
	(_isa_names_table): Replace P_ZERO with P_NONE.
	(get_builtin_code_for_version): Replace P_ZERO with P_NONE.  Use
	processor_alias_table.
	(fold_builtin_cpu): Replace arch_names_table with
	processor_alias_table.
	* config/i386/i386.h: Include "common/config/i386/i386-cpuinfo.h".
	(pta): Add model and priority.
	(num_arch_names): New.

2020-06-24  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_find_first_scalar_stmt_in_slp):
	Declare.
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p):
	Simplify for new position of vectorized SLP loads.
	(vect_slp_analyze_node_dependences): Adjust for it.
	(vect_slp_analyze_and_verify_node_alignment): Compute alignment
	for the first stmts dataref.
	* tree-vect-slp.c (vect_find_first_scalar_stmt_in_slp): New.
	(vect_schedule_slp_instance): Emit loads before the
	first scalar stmt.
	* tree-vect-stmts.c (vectorizable_load): Do what the comment
	says and use vect_find_first_scalar_stmt_in_slp.

2020-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95856
	* tree-vectorizer.c (vect_stmt_dominates_stmt_p): Honor
	region marker -1u.

2020-06-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/95810
	* fold-const.c (fold_cond_expr_with_comparison): Optimize
	A <= 0 ? A : -A into (type)-absu(A) rather than -abs(A).

2020-06-24  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_omp_for): Fix two pastos.

2020-06-24  Martin Liska  <mliska@suse.cz>

	* optc-save-gen.awk: Compare string options in cl_optimization_compare
	by strcmp.

2020-06-23  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config.gcc: Identify power10 as a 64-bit processor and as valid
	for --with-cpu and --with-tune.

2020-06-23  David Edelsohn  <dje.gcc@gmail.com>

	* Makefile.in (LANG_MAKEFRAGS): Same.
	(tmake_file): Use -include.
	(xmake_file): Same.

2020-06-23  Michael Meissner  <meissner@linux.ibm.com>

	* REVISION: Delete file meant for a private branch.

2020-06-23  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/95646
	* config/arm/arm.c: (cmse_nonsecure_entry_clear_before_return): Use
	'callee_saved_reg_p' instead of 'calL_used_or_fixed_reg_p'.

2020-06-23  Alexandre Oliva  <oliva@adacore.com>

	* collect-utils.h (dumppfx): New.
	* collect-utils.c (dumppfx): Likewise.
	* lto-wrapper.c (run_gcc): Set global dumppfx.
	(compile_offload_image): Pass a -dumpbase on to mkoffload.
	* config/nvptx/mkoffload.c (ptx_dumpbase): New.
	(main): Handle incoming -dumpbase.  Set ptx_dumpbase.  Obey
	save_temps.
	(compile_native): Pass -dumpbase et al to compiler.
	* config/gcn/mkoffload.c (gcn_dumpbase): New.
	(main): Handle incoming -dumpbase.  Set gcn_dumpbase.  Obey
	save_temps.  Pass -dumpbase et al to offload target compiler.
	(compile_native): Pass -dumpbase et al to compiler.

2020-06-23  Michael Meissner  <meissner@linux.ibm.com>

	* REVISION: New file.

2020-06-22  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.h: Use _ARCH_PWR10, not _ARCH_PWR_FUTURE.
	Update comment for ISA 3.1.
	* config/rs6000/altivec.md: Use TARGET_POWER10, not TARGET_FUTURE.
	* config/rs6000/driver-rs6000.c (asm_names): Use -mpwr10 for power10
	on AIX, and -mpower10 elsewhere.
	* config/rs6000/future.md: Delete.
	* config/rs6000/linux64.h: Update comments.  Use TARGET_POWER10, not
	TARGET_FUTURE.
	* config/rs6000/power10.md: New file.
	* config/rs6000/ppc-auxv.h: Use PPC_PLATFORM_POWER10, not
	PPC_PLATFORM_FUTURE.
	* config/rs6000/rs6000-builtin.def: Update comments.  Use BU_P10V_*
	names instead of BU_FUTURE_V_* names.  Use RS6000_BTM_P10 instead of
	RS6000_BTM_FUTURE.  Use P10_BUILTIN_* instead of FUTURE_BUILTIN_*.
	Use BU_P10_* instead of BU_FUTURE_*.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
	_ARCH_PWR10 instead of _ARCH_PWR_FUTURE.
	(altivec_resolve_overloaded_builtin): Use P10_BUILTIN_VEC_XXEVAL, not
	FUTURE_BUILTIN_VEC_XXEVAL.
	* config/rs6000/rs6000-call.c: Use P10_BUILTIN_*, not FUTURE_BUILTIN_*.
	Update compiler messages.
	* config/rs6000/rs6000-cpus.def: Update comments.  Use ISA_3_1_*, not
	ISA_FUTURE_*.  Use OPTION_MASK_POWER10, not OPTION_MASK_FUTURE.
	* config/rs6000/rs6000-opts.h: Use PROCESSOR_POWER10, not
	PROCESSOR_FUTURE.
	* config/rs6000/rs6000-string.c: Ditto.
	* config/rs6000/rs6000-tables.opt (rs6000_cpu_opt_value): Use "power10"
	instead of "future", reorder it to right after "power9".
	* config/rs6000/rs6000.c: Update comments.  Use OPTION_MASK_POWER10,
	not OPTION_MASK_FUTURE.  Use TARGET_POWER10, not TARGET_FUTURE.  Use
	RS6000_BTM_P10, not RS6000_BTM_FUTURE.  Update compiler messages.
	Use PROCESSOR_POWER10, not PROCESSOR_FUTURE.  Use ISA_3_1_MASKS_SERVER,
	not ISA_FUTURE_MASKS_SERVER.
	(rs6000_opt_masks): Use "power10" instead of "future".
	(rs6000_builtin_mask_names): Ditto.
	(rs6000_disable_incompatible_switches): Ditto.
	* config/rs6000/rs6000.h: Use -mpower10, not -mfuture.  Use
	-mcpu=power10, not -mcpu=future.  Use MASK_POWER10, not MASK_FUTURE.
	Use OPTION_MASK_POWER10, not OPTION_MASK_FUTURE.  Use RS6000_BTM_P10,
	not RS6000_BTM_FUTURE.
	* config/rs6000/rs6000.md: Use "power10", not "future".  Use
	TARGET_POWER10, not TARGET_FUTURE.  Include "power10.md", not
	"future.md".
	* config/rs6000/rs6000.opt (mfuture): Delete.
	(mpower10): New.
	* config/rs6000/t-rs6000: Use "power10.md", not "future.md".
	* config/rs6000/vsx.md: Use TARGET_POWER10, not TARGET_FUTURE.

2020-06-22  Richard Sandiford  <richard.sandiford@arm.com>

	* coretypes.h (first_type): Delete.
	* recog.h (insn_gen_fn::operator()): Go back to using a decltype.

2020-06-22  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* doc/sourcebuild.texi (arm_v8_1m_mve_fp_ok): Add item.
	(arm_mve_hw): Likewise.

2020-06-22  H.J. Lu  <hjl.tools@gmail.com>

	PR target/95791
	* config/i386/i386.c (ix86_dirflag_mode_needed): Skip
	EXT_REX_SSE_REG_P.

2020-06-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95770
	* tree-vect-slp.c (vect_schedule_slp_instance): Also consider
	external defs.

2020-06-22  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_function_arg): Disallow vector arguments.
	(gcn_return_in_memory): Return vectors in memory.

2020-06-22  Jakub Jelinek  <jakub@redhat.com>

	* omp-general.c (omp_extract_for_data): For triangular loops with
	all loop invariant expressions constant where the innermost loop is
	executed at least once compute number of iterations at compile time.

2020-06-22  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.h (ASM_SPEC): Remove riscv_expand_arch call.
	(DRIVER_SELF_SPECS): New.

2020-06-22  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-builtins.c (RISCV_FTYPE_NAME0): New.
	(RISCV_FTYPE_ATYPES0): New.
	(riscv_builtins): Using RISCV_USI_FTYPE for frflags.
	* config/riscv/riscv-ftypes.def: Remove VOID argument.

2020-06-21  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
	* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
	(ASM_SPEC32): New.
	(ASM_SPEC64): New.
	(ASM_CPU_SPEC): Remove vsx and altivec options.
	(CPP_SPEC_COMMON): Rename from CPP_SPEC.
	(CPP_SPEC32): New.
	(CPP_SPEC64): New.
	(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
	(TARGET_DEFAULT): Only define if not BIARCH.
	(LIB_SPEC_COMMON): Rename from LIB_SPEC.
	(LIB_SPEC32): New.
	(LIB_SPEC64): New.
	(LINK_SPEC_COMMON): Rename from LINK_SPEC.
	(LINK_SPEC32): New.
	(LINK_SPEC64): New.
	(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
	(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
	(CPP_SPEC): Same.
	(CPLUSPLUS_CPP_SPEC): Same.
	(LIB_SPEC): Same.
	(LINK_SPEC): Same.
	(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
	* config/rs6000/defaultaix64.h: New file.
	* config/rs6000/t-aix64: New file.

2020-06-21  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/predicates.md (mma_assemble_input_operand): New.
	* config/rs6000/rs6000-builtin.def (BU_MMA_1, BU_MMA_V2, BU_MMA_3,
	BU_MMA_5, BU_MMA_6, BU_VSX_1): Add support macros for defining MMA
	built-in functions.
	(ASSEMBLE_ACC, ASSEMBLE_PAIR, DISASSEMBLE_ACC, DISASSEMBLE_PAIR,
	PMXVBF16GER2, PMXVBF16GER2NN, PMXVBF16GER2NP, PMXVBF16GER2PN,
	PMXVBF16GER2PP, PMXVF16GER2, PMXVF16GER2NN, PMXVF16GER2NP,
	PMXVF16GER2PN, PMXVF16GER2PP, PMXVF32GER, PMXVF32GERNN,
	PMXVF32GERNP, PMXVF32GERPN, PMXVF32GERPP, PMXVF64GER, PMXVF64GERNN,
	PMXVF64GERNP, PMXVF64GERPN, PMXVF64GERPP, PMXVI16GER2, PMXVI16GER2PP,
	PMXVI16GER2S, PMXVI16GER2SPP, PMXVI4GER8, PMXVI4GER8PP, PMXVI8GER4,
	PMXVI8GER4PP, PMXVI8GER4SPP, XVBF16GER2, XVBF16GER2NN, XVBF16GER2NP,
	XVBF16GER2PN, XVBF16GER2PP, XVCVBF16SP, XVCVSPBF16, XVF16GER2,
	XVF16GER2NN, XVF16GER2NP, XVF16GER2PN, XVF16GER2PP, XVF32GER,
	XVF32GERNN, XVF32GERNP, XVF32GERPN, XVF32GERPP, XVF64GER, XVF64GERNN,
	XVF64GERNP, XVF64GERPN, XVF64GERPP, XVI16GER2, XVI16GER2PP, XVI16GER2S,
	XVI16GER2SPP, XVI4GER8, XVI4GER8PP, XVI8GER4, XVI8GER4PP, XVI8GER4SPP,
	XXMFACC, XXMTACC, XXSETACCZ): Add MMA built-ins.
	* config/rs6000/rs6000.c (rs6000_emit_move): Use CONST_INT_P.
	Allow zero constants.
	(print_operand) <case 'A'>: New output modifier.
	(rs6000_split_multireg_move): Add support for inserting accumulator
	priming and depriming instructions.  Add support for splitting an
	assemble accumulator pattern.
	* config/rs6000/rs6000-call.c (mma_init_builtins, mma_expand_builtin,
	rs6000_gimple_fold_mma_builtin): New functions.
	(RS6000_BUILTIN_M): New macro.
	(def_builtin): Handle RS6000_BTC_QUAD and RS6000_BTC_PAIR attributes.
	(bdesc_mma): Add new MMA built-in support.
	(htm_expand_builtin): Use RS6000_BTC_OPND_MASK.
	(rs6000_invalid_builtin): Add handling of RS6000_BTM_FUTURE and
	RS6000_BTM_MMA.
	(rs6000_builtin_valid_without_lhs): Handle RS6000_BTC_VOID attribute.
	(rs6000_gimple_fold_builtin): Call rs6000_builtin_is_supported_p
	and rs6000_gimple_fold_mma_builtin.
	(rs6000_expand_builtin): Call mma_expand_builtin.
	Use RS6000_BTC_OPND_MASK.
	(rs6000_init_builtins): Adjust comment.  Call mma_init_builtins.
	(htm_init_builtins): Use RS6000_BTC_OPND_MASK.
	(builtin_function_type): Handle VSX_BUILTIN_XVCVSPBF16 and
	VSX_BUILTIN_XVCVBF16SP.
	* config/rs6000/rs6000.h (RS6000_BTC_QUINARY, RS6000_BTC_SENARY,
	RS6000_BTC_OPND_MASK, RS6000_BTC_QUAD, RS6000_BTC_PAIR,
	RS6000_BTC_QUADPAIR, RS6000_BTC_GIMPLE): New defines.
	(RS6000_BTC_PREDICATE, RS6000_BTC_ABS, RS6000_BTC_DST,
	RS6000_BTC_TYPE_MASK, RS6000_BTC_ATTR_MASK): Adjust values.
	* config/rs6000/mma.md (MAX_MMA_OPERANDS): New define_constant.
	(UNSPEC_MMA_ASSEMBLE_ACC, UNSPEC_MMA_PMXVBF16GER2,
	UNSPEC_MMA_PMXVBF16GER2NN, UNSPEC_MMA_PMXVBF16GER2NP,
	UNSPEC_MMA_PMXVBF16GER2PN, UNSPEC_MMA_PMXVBF16GER2PP,
	UNSPEC_MMA_PMXVF16GER2, UNSPEC_MMA_PMXVF16GER2NN,
	UNSPEC_MMA_PMXVF16GER2NP, UNSPEC_MMA_PMXVF16GER2PN,
	UNSPEC_MMA_PMXVF16GER2PP, UNSPEC_MMA_PMXVF32GER,
	UNSPEC_MMA_PMXVF32GERNN, UNSPEC_MMA_PMXVF32GERNP,
	UNSPEC_MMA_PMXVF32GERPN, UNSPEC_MMA_PMXVF32GERPP,
	UNSPEC_MMA_PMXVF64GER, UNSPEC_MMA_PMXVF64GERNN,
	UNSPEC_MMA_PMXVF64GERNP, UNSPEC_MMA_PMXVF64GERPN,
	UNSPEC_MMA_PMXVF64GERPP, UNSPEC_MMA_PMXVI16GER2,
	UNSPEC_MMA_PMXVI16GER2PP, UNSPEC_MMA_PMXVI16GER2S,
	UNSPEC_MMA_PMXVI16GER2SPP, UNSPEC_MMA_PMXVI4GER8,
	UNSPEC_MMA_PMXVI4GER8PP, UNSPEC_MMA_PMXVI8GER4,
	UNSPEC_MMA_PMXVI8GER4PP, UNSPEC_MMA_PMXVI8GER4SPP,
	UNSPEC_MMA_XVBF16GER2, UNSPEC_MMA_XVBF16GER2NN,
	UNSPEC_MMA_XVBF16GER2NP, UNSPEC_MMA_XVBF16GER2PN,
	UNSPEC_MMA_XVBF16GER2PP, UNSPEC_MMA_XVF16GER2, UNSPEC_MMA_XVF16GER2NN,
	UNSPEC_MMA_XVF16GER2NP, UNSPEC_MMA_XVF16GER2PN, UNSPEC_MMA_XVF16GER2PP,
	UNSPEC_MMA_XVF32GER, UNSPEC_MMA_XVF32GERNN, UNSPEC_MMA_XVF32GERNP,
	UNSPEC_MMA_XVF32GERPN, UNSPEC_MMA_XVF32GERPP, UNSPEC_MMA_XVF64GER,
	UNSPEC_MMA_XVF64GERNN, UNSPEC_MMA_XVF64GERNP, UNSPEC_MMA_XVF64GERPN,
	UNSPEC_MMA_XVF64GERPP, UNSPEC_MMA_XVI16GER2, UNSPEC_MMA_XVI16GER2PP,
	UNSPEC_MMA_XVI16GER2S, UNSPEC_MMA_XVI16GER2SPP, UNSPEC_MMA_XVI4GER8,
	UNSPEC_MMA_XVI4GER8PP, UNSPEC_MMA_XVI8GER4, UNSPEC_MMA_XVI8GER4PP,
	UNSPEC_MMA_XVI8GER4SPP, UNSPEC_MMA_XXMFACC, UNSPEC_MMA_XXMTACC): New.
	(MMA_ACC, MMA_VV, MMA_AVV, MMA_PV, MMA_APV, MMA_VVI4I4I8,
	MMA_AVVI4I4I8, MMA_VVI4I4I2, MMA_AVVI4I4I2, MMA_VVI4I4,
	MMA_AVVI4I4, MMA_PVI4I2, MMA_APVI4I2, MMA_VVI4I4I4,
	MMA_AVVI4I4I4): New define_int_iterator.
	(acc, vv, avv, pv, apv, vvi4i4i8, avvi4i4i8, vvi4i4i2,
	avvi4i4i2, vvi4i4, avvi4i4, pvi4i2, apvi4i2, vvi4i4i4,
	avvi4i4i4): New define_int_attr.
	(*movpxi): Add zero constant alternative.
	(mma_assemble_pair, mma_assemble_acc): New define_expand.
	(*mma_assemble_acc): New define_insn_and_split.
	(mma_<acc>, mma_xxsetaccz, mma_<vv>, mma_<avv>, mma_<pv>, mma_<apv>,
	mma_<vvi4i4i8>, mma_<avvi4i4i8>, mma_<vvi4i4i2>, mma_<avvi4i4i2>,
	mma_<vvi4i4>, mma_<avvi4i4>, mma_<pvi4i2>, mma_<apvi4i2>,
	mma_<vvi4i4i4>, mma_<avvi4i4i4>): New define_insn.
	* config/rs6000/rs6000.md (define_attr "type"): New type mma.
	* config/rs6000/vsx.md (UNSPEC_VSX_XVCVBF16SP): New.
	(UNSPEC_VSX_XVCVSPBF16): Likewise.
	(XVCVBF16): New define_int_iterator.
	(xvcvbf16): New define_int_attr.
	(vsx_<xvcvbf16>): New define_insn.
	* doc/extend.texi: Document the mma built-ins.

2020-06-21  Peter Bergner  <bergner@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/mma.md: New file.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
	__MMA__ for mma.
	* config/rs6000/rs6000-call.c (rs6000_init_builtins): Add support
	for __vector_pair and __vector_quad types.
	* config/rs6000/rs6000-cpus.def (OTHER_FUTURE_MASKS): Add
	OPTION_MASK_MMA.
	(POWERPC_MASKS): Likewise.
	* config/rs6000/rs6000-modes.def (OI, XI): New integer modes.
	(POI, PXI): New partial integer modes.
	* config/rs6000/rs6000.c (TARGET_INVALID_CONVERSION): Define.
	(rs6000_hard_regno_nregs_internal): Use VECTOR_ALIGNMENT_P.
	(rs6000_hard_regno_mode_ok_uncached): Likewise.
	Add support for POImode being allowed in VSX registers and PXImode
	being allowed in FP registers.
	(rs6000_modes_tieable_p): Adjust comment.
	Add support for POImode and PXImode.
	(rs6000_debug_reg_global) <print_tieable_modes>: Add OImode, POImode
	XImode, PXImode, V2SImode, V2SFmode and CCFPmode..
	(rs6000_setup_reg_addr_masks): Use VECTOR_ALIGNMENT_P.
	Set up appropriate addr_masks for vector pair and vector quad addresses.
	(rs6000_init_hard_regno_mode_ok): Add support for vector pair and
	vector quad registers.  Setup reload handlers for POImode and PXImode.
	(rs6000_builtin_mask_calculate): Add support for RS6000_BTM_MMA.
	(rs6000_option_override_internal): Error if -mmma is specified
	without -mcpu=future.
	(rs6000_slow_unaligned_access): Use VECTOR_ALIGNMENT_P.
	(quad_address_p): Change size test to less than 16 bytes.
	(reg_offset_addressing_ok_p): Add support for ISA 3.1 vector pair
	and vector quad instructions.
	(avoiding_indexed_address_p): Likewise.
	(rs6000_emit_move): Disallow POImode and PXImode moves involving
	constants.
	(rs6000_preferred_reload_class): Prefer VSX registers for POImode
	and FP registers for PXImode.
	(rs6000_split_multireg_move): Support splitting POImode and PXImode
	move instructions.
	(rs6000_mangle_type): Adjust comment.  Add support for mangling
	__vector_pair and __vector_quad types.
	(rs6000_opt_masks): Add entry for mma.
	(rs6000_builtin_mask_names): Add RS6000_BTM_MMA and RS6000_BTM_FUTURE.
	(rs6000_function_value): Use VECTOR_ALIGNMENT_P.
	(address_to_insn_form): Likewise.
	(reg_to_non_prefixed): Likewise.
	(rs6000_invalid_conversion): New function.
	* config/rs6000/rs6000.h (MASK_MMA): Define.
	(BIGGEST_ALIGNMENT): Set to 512 if MMA support is enabled.
	(VECTOR_ALIGNMENT_P): New helper macro.
	(ALTIVEC_VECTOR_MODE): Use VECTOR_ALIGNMENT_P.
	(RS6000_BTM_MMA): Define.
	(RS6000_BTM_COMMON): Add RS6000_BTM_MMA and RS6000_BTM_FUTURE.
	(rs6000_builtin_type_index): Add RS6000_BTI_vector_pair and
	RS6000_BTI_vector_quad.
	(vector_pair_type_node): New.
	(vector_quad_type_node): New.
	* config/rs6000/rs6000.md: Include mma.md.
	(define_mode_iterator RELOAD): Add POI and PXI.
	* config/rs6000/t-rs6000 (MD_INCLUDES): Add mma.md.
	* config/rs6000/rs6000.opt (-mmma): New.
	* doc/invoke.texi: Document -mmma.

2020-06-20  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/95638
	* tree-loop-distribution.c (pg_edge_callback_data): New field.
	(loop_distribution::break_alias_scc_partitions): Record and restore
	postorder information.  Fix memory leak.

2020-06-19  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/gcn.c (gcn_related_vector_mode): Add ARG_UNUSED.
	(output_file_start): Use const 'char *'.

2020-06-19  Przemyslaw Wirkus  <Przemyslaw.Wirkus@arm.com>

	PR tree-optimization/94880
	* match.pd (A | B) - B -> (A & ~B): New simplification.

2020-06-19  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Adjust
	for lane permutations.

2020-06-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95761
	* tree-vect-slp.c (vect_schedule_slp_instance): Walk all
	vectorized stmts for finding the last one.

2020-06-18  Felix Yang  <felix.yang@huawei.com>

	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Call
	vect_relevant_for_alignment_p to filter out data references in
	the loop whose alignment is irrelevant when trying loop peeling
	to force alignment.

2020-06-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*cmpqi_ext<mode>_1): Use SWI248 mode
	iterator instead of SImode for ZERO_EXTRACT RTX.  Use SWI248
	mode iterator for the first operand of ZERO_EXTRACT RTX.
	Change ext_register_operand predicate to register_operand.
	Rename from *cmpqi_ext_1.
	(*cmpqi_ext<mode>_2): Ditto.  Rename from *cmpqi_ext_2.
	(*cmpqi_ext<mode>_3): Ditto.  Rename from *cmpqi_ext_3.
	(*cmpqi_ext<mode>_4): Ditto.  Rename from *cmpqi_ext_4.
	(cmpi_ext_3): Use HImode instead of SImode for ZERO_EXTRACT RTX.
	(*extv<mode>): Use SWI24 mode iterator for the first operand
	of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.
	(*extzv<mode>): Use SWI248 mode iterator for the first operand
	of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.
	(*extzvqi): Use SWI248 mode iterator instead of SImode for
	ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the first operand
	of ZERO_EXTRACT RTX.  Change ext_register_operand predicate to
	register_operand.
	(*extzvqi_mem_rex64 and corresponding peephole2):  Use SWI248 mode
	iterator instead of SImode for ZERO_EXTRACT RTX.  Use SWI248
	mode iterator for the first operand of ZERO_EXTRACT RTX.
	Change ext_register_operand predicate to register_operand.
	(@insv<mode>_1): Use SWI248 mode iterator for the first operand
	of ZERO_EXTRACT RTX.  Change ext_register_operand predicate to
	register_operand.
	(*insvqi_1): Use SWI248 mode iterator instead of SImode
	for ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the
	first operand of ZERO_EXTRACT RTX.  Change ext_register_operand
	predicate to register_operand.
	(*insvqi_2): Ditto.
	(*insvqi_3): Ditto.
	(*insvqi_1_mem_rex64 and corresponding peephole2):  Use SWI248 mode
	iterator instead of SImode for ZERO_EXTRACT RTX.  Use SWI248
	mode iterator for the first operand of ZERO_EXTRACT RTX.
	Change ext_register_operand predicate to register_operand.
	(addqi_ext_1): New expander.
	(*addqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
	for ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the first
	operand of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.  Rename from *addqi_ext_1.
	(*addqi_ext<mode>_2): Ditto. Rename from *addqi_ext_2.
	(divmodqi4): Use HImode instead of SImode for ZERO_EXTRACT RTX.
	(udivmodqi4): Ditto.
	(testqi_ext_1): Use HImode instead of SImode for ZERO_EXTRACT RTX.
	(*testqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
	for ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the first
	operand of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.  Rename from *testqi_ext_1.
	(*testqi_ext<mode>_2): Ditto.  Rename from *testqi_ext_2.
	(andqi_ext_1): New expander.
	(*andqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
	for ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the first
	operand of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.  Rename from andqi_ext_1.
	(*andqi_ext<mode>_1_cc): Ditto.  Rename from *andqi_ext_1_cc.
	(*andqi_ext<mode>_2): Ditto.  Rename from *andqi_ext_2.
	(*<code>qi_ext<mode>_1): Ditto.  Rename from *<code>qi_ext_1.
	(*<code>qi_ext<mode>_2): Ditto.  Rename from *<code>qi_ext_2.
	(xorqi_ext_1_cc): Use HImode instead of SImode for ZERO_EXTRACT RTX.
	(*xorqi_ext<mode>_1_cc):  Use SWI248 mode iterator instead of SImode
	for ZERO_EXTRACT RTX.  Use SWI248 mode iterator for the first
	operand of ZERO_EXTRACT RTX.  Change ext_register_operand predicate
	to register_operand.  Rename from *xorqi_ext_1_cc.
	* config/i386/i386-expand.c (ix86_split_idivmod): Emit ZERO_EXTRACT
	in mode, matching its first operand.
	(promote_duplicated_reg): Update for renamed insv<mode>_1.
	* config/i386/predicates.md (ext_register_operand): Remove predicate.

2020-06-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/95667
	PR middle-end/92814
	* builtins.c (compute_objsize): Remove call to
	compute_builtin_object_size and instead compute conservative sizes
	directly here.

2020-06-18  Martin Liska  <mliska@suse.cz>

	* coretypes.h (struct iterator_range): New type.
	* tree-vect-patterns.c (vect_determine_precisions): Use
	range-based iterator.
	(vect_pattern_recog): Likewise.
	* tree-vect-slp.c (_bb_vec_info):  Likewise.
	(_bb_vec_info::~_bb_vec_info): Likewise.
	(vect_slp_check_for_constructors): Likewise.
	* tree-vectorizer.h:Add new iterators
	and functions that use it.

2020-06-18  Martin Liska  <mliska@suse.cz>

	* config/rs6000/rs6000-call.c (fold_build_vec_cmp):
	Since 502d63b6d6141597bb18fd23c87736a1b384cf8f, first argument
	of a VEC_COND_EXPR cannot be tcc_comparison and so that
	a SSA_NAME needs to be created before we use it for the first
	argument of the VEC_COND_EXPR.
	(fold_compare_helper): Pass gsi to fold_build_vec_cmp.

2020-06-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/95739
	* internal-fn.c (expand_vect_cond_optab_fn): Move the result
	to the target if necessary.
	(expand_vect_cond_mask_optab_fn): Likewise.

2020-06-18  Martin Liska  <mliska@suse.cz>

	* tree-ssa-reassoc.c (ovce_extract_ops): Replace *vcond with
	vcond as we check for NULL pointer.

2020-06-18  Tobias Burnus  <tobias@codesourcery.com>

	* gimple-pretty-print.c (dump_binary_rhs): Use braces to
	silence empty-body warning with gcc_fallthrough.

2020-06-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/95699
	* tree-ssa-phiopt.c (minmax_replacement): Treat (signed int)x < 0
	as x > INT_MAX and (signed int)x >= 0 as x <= INT_MAX.  Move variable
	declarations to the statements that set them where possible.

2020-06-18  Jakub Jelinek  <jakub@redhat.com>

	PR target/95713
	* tree-ssa-forwprop.c (simplify_vector_constructor): Don't allow
	scalar mode halfvectype other than vector boolean for
	VEC_PACK_TRUNC_EXPR.

2020-06-18  Richard Biener  <rguenther@suse.de>

	* varasm.c (assemble_variable): Make sure to not
	defer output when outputting addressed constants.
	(output_constant_def_contents): Likewise.
	(add_constant_to_table): Take and pass on whether to
	defer output.
	(output_addressed_constants): Likewise.
	(output_constant_def): Pass on whether to defer output
	to add_constant_to_table.
	(tree_output_constant_def): Defer output of constants.

2020-06-18  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::two_operators): Remove.
	(_slp_tree::lane_permutation): New member.
	(_slp_tree::code): Likewise.
	(SLP_TREE_TWO_OPERATORS): Remove.
	(SLP_TREE_LANE_PERMUTATION): New.
	(SLP_TREE_CODE): Likewise.
	(vect_stmt_dominates_stmt_p): Declare.
	* tree-vectorizer.c (vect_stmt_dominates_stmt_p): New function.
	* tree-vect-stmts.c (vect_model_simple_cost): Remove
	SLP_TREE_TWO_OPERATORS handling.
	* tree-vect-slp.c (_slp_tree::_slp_tree): Amend.
	(_slp_tree::~_slp_tree): Likewise.
	(vect_two_operations_perm_ok_p): Remove.
	(vect_build_slp_tree_1): Remove verification of two-operator
	permutation here.
	(vect_build_slp_tree_2): When we have two different operators
	build two computation SLP nodes and a blend.
	(vect_print_slp_tree): Print the lane permutation if it exists.
	(slp_copy_subtree): Copy it.
	(vect_slp_rearrange_stmts): Re-arrange it.
	(vect_slp_analyze_node_operations_1): Handle SLP_TREE_CODE
	VEC_PERM_EXPR explicitely.
	(vect_schedule_slp_instance): Likewise.  Remove old
	SLP_TREE_TWO_OPERATORS code.
	(vectorizable_slp_permutation): New function.

2020-06-18  Martin Liska  <mliska@suse.cz>

	* tree-vect-generic.c (expand_vector_condition): Check
	for gassign before inspecting RHS.

2020-06-17  Thomas Schwinge  <thomas@codesourcery.com>

	* gimplify.c (omp_notice_threadprivate_variable)
	(omp_default_clause, omp_notice_variable): 'inform' after 'error'
	diagnostic.  Adjust all users.

2020-06-17  Thomas Schwinge  <thomas@codesourcery.com>

	* hsa-gen.c (gen_hsa_insns_for_call): Move 'function_decl ==
	NULL_TREE' check earlier.

2020-06-17  Forrest Timour  <forrest.timour@gmail.com>

	* doc/extend.texi (attribute access): Fix a typo.

2020-06-17  Bin Cheng  <bin.cheng@linux.alibaba.com>
	    Kaipeng Zhou  <zhoukaipeng3@huawei.com>

	PR tree-optimization/95199
	* tree-vect-stmts.c: Eliminate common stmts for bump and offset in
	strided load/store operations and remove redundant code.

2020-06-17  Richard Sandiford  <richard.sandiford@arm.com>

	* coretypes.h (first_type): New alias template.
	* recog.h (insn_gen_fn::operator()): Use it instead of a decltype.
	Remove spurious “...” and split the function type out into a typedef.

2020-06-17  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_fix_long_loop_prediction): Exit early
	for PARALLELs.

2020-06-17  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_1): Set the passed
	in *vectype parameter.
	(vect_build_slp_tree_2): Set SLP_TREE_VECTYPE from what
	vect_build_slp_tree_1 computed.
	(vect_analyze_slp_instance): Set SLP_TREE_VECTYPE.
	(vect_slp_analyze_node_operations_1): Use the SLP node vector type.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (vect_is_simple_use): Take the vector type
	from SLP_TREE_VECTYPE.

2020-06-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95717
	* tree-vect-loop-manip.c (slpeel_tree_duplicate_loop_to_edge_cfg):
	Move BB SSA updating before exit/latch PHI current def copying.

2020-06-17  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Add new file.
	* expr.c (expand_expr_real_2): Add gcc_unreachable as we should
	not meet this condition.
	(do_store_flag): Likewise.
	* gimplify.c (gimplify_expr): Gimplify first argument of
	VEC_COND_EXPR to be a SSA name.
	* internal-fn.c (vec_cond_mask_direct): New.
	(vec_cond_direct): Likewise.
	(vec_condu_direct): Likewise.
	(vec_condeq_direct): Likewise.
	(expand_vect_cond_optab_fn):  New.
	(expand_vec_cond_optab_fn): Likewise.
	(expand_vec_condu_optab_fn): Likewise.
	(expand_vec_condeq_optab_fn): Likewise.
	(expand_vect_cond_mask_optab_fn): Likewise.
	(expand_vec_cond_mask_optab_fn): Likewise.
	(direct_vec_cond_mask_optab_supported_p): Likewise.
	(direct_vec_cond_optab_supported_p): Likewise.
	(direct_vec_condu_optab_supported_p): Likewise.
	(direct_vec_condeq_optab_supported_p): Likewise.
	* internal-fn.def (VCOND): New OPTAB.
	(VCONDU): Likewise.
	(VCONDEQ): Likewise.
	(VCOND_MASK): Likewise.
	* optabs.c (get_rtx_code): Make it global.
	(expand_vec_cond_mask_expr): Removed.
	(expand_vec_cond_expr): Removed.
	* optabs.h (expand_vec_cond_expr): Likewise.
	(vector_compare_rtx): Make it global.
	* passes.def: Add new pass_gimple_isel pass.
	* tree-cfg.c (verify_gimple_assign_ternary): Add check
	for VEC_COND_EXPR about first argument.
	* tree-pass.h (make_pass_gimple_isel): New.
	* tree-ssa-forwprop.c (pass_forwprop::execute): Prevent
	propagation of the first argument of a VEC_COND_EXPR.
	* tree-ssa-reassoc.c (ovce_extract_ops): Support SSA_NAME as
	first argument of a VEC_COND_EXPR.
	(optimize_vec_cond_expr): Likewise.
	* tree-vect-generic.c (expand_vector_divmod): Make SSA_NAME
	for a first argument of created VEC_COND_EXPR.
	(expand_vector_condition): Fix coding style.
	* tree-vect-stmts.c (vectorizable_condition): Gimplify
	first argument.
	* gimple-isel.cc: New file.

2020-06-17  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-hsa.h (TEXT_SECTION_ASM_OP): Use ".text".
	(BSS_SECTION_ASM_OP): Use ".bss".
	(ASM_SPEC): Remove "-mattr=-code-object-v3".
	(LINK_SPEC): Add "--export-dynamic".
	* config/gcn/gcn-opts.h (processor_type): Replace PROCESSOR_VEGA with
	PROCESSOR_VEGA10 and PROCESSOR_VEGA20.
	* config/gcn/gcn-run.c (HSA_RUNTIME_LIB): Use ".so.1" variant.
	(load_image): Remove obsolete relocation handling.
	Add ".kd" suffix to the symbol names.
	* config/gcn/gcn.c (MAX_NORMAL_SGPR_COUNT): Set to 62.
	(gcn_option_override): Update gcn_isa test.
	(gcn_kernel_arg_types): Update all the assembler directives.
	Remove the obsolete options.
	(gcn_conditional_register_usage): Update MAX_NORMAL_SGPR_COUNT usage.
	(gcn_omp_device_kind_arch_isa): Handle PROCESSOR_VEGA10 and
	PROCESSOR_VEGA20.
	(output_file_start): Rework assembler file header.
	(gcn_hsa_declare_function_name): Rework kernel metadata.
	* config/gcn/gcn.h (GCN_KERNEL_ARG_TYPES): Set to 16.
	* config/gcn/gcn.opt (PROCESSOR_VEGA): Remove enum.
	(PROCESSOR_VEGA10): New enum value.
	(PROCESSOR_VEGA20): New enum value.

2020-06-17  Martin Liska  <mliska@suse.cz>

	* gcov-dump.c (print_version): Collapse lisence header to 2 lines
	in --version.
	* gcov-tool.c (print_version): Likewise.
	* gcov.c (print_version): Likewise.

2020-06-17  liuhongt  <hongtao.liu@intel.com>

	PR target/95524
	* config/i386/i386-expand.c
	(ix86_expand_vec_shift_qihi_constant): New function.
	* config/i386/i386-protos.h
	(ix86_expand_vec_shift_qihi_constant): Declare.
	* config/i386/sse.md (<shift_insn><mode>3): Optimize shift
	V*QImode by constant.

2020-06-16  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/95649
	* tree-ssa-propagate.c (propagate_into_phi_args): Do not propagate unless
	value is a constant.

2020-06-16  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config.in: Regenerate.
	* config/s390/s390.c (print_operand): Emit vector alignment hints
	for target z13, if AS accepts them.  For other targets the logic
	stays the same.
	* config/s390/s390.h (TARGET_VECTOR_LOADSTORE_ALIGNMENT_HINTS): Define
	macro.
	* configure: Regenerate.
	* configure.ac: Check HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS_ON_Z13.

2020-06-16  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (__arm_vaddq_m_n_s8): Correct the intrinsic
	arguments.
	(__arm_vaddq_m_n_s32): Likewise.
	(__arm_vaddq_m_n_s16): Likewise.
	(__arm_vaddq_m_n_u8): Likewise.
	(__arm_vaddq_m_n_u32): Likewise.
	(__arm_vaddq_m_n_u16): Likewise.
	(__arm_vaddq_m): Modify polymorphic variant.

2020-06-16  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/mve.md (mve_uqrshll_sat<supf>_di): Correct the predicate
	and constraint of all the operands.
	(mve_sqrshrl_sat<supf>_di): Likewise.
	(mve_uqrshl_si): Likewise.
	(mve_sqrshr_si): Likewise.
	(mve_uqshll_di): Likewise.
	(mve_urshrl_di): Likewise.
	(mve_uqshl_si): Likewise.
	(mve_urshr_si): Likewise.
	(mve_sqshl_si): Likewise.
	(mve_srshr_si): Likewise.
	(mve_srshrl_di): Likewise.
	(mve_sqshll_di): Likewise.
	* config/arm/predicates.md (arm_low_register_operand): Define.

2020-06-16  Jakub Jelinek  <jakub@redhat.com>

	* tree.h (OMP_FOR_NON_RECTANGULAR): Define.
	* gimplify.c (gimplify_omp_for): Diagnose schedule, ordered
	or dist_schedule clause on non-rectangular loops.  Handle
	gimplification of non-rectangular lb/b expressions.  When changing
	iteration variable, adjust also non-rectangular lb/b expressions
	referencing that.
	* omp-general.h (struct omp_for_data_loop): Add m1, m2 and outer
	members.
	(struct omp_for_data): Add non_rect member.
	* omp-general.c (omp_extract_for_data): Handle non-rectangular
	loops.  Fill in non_rect, m1, m2 and outer.
	* omp-low.c (lower_omp_for): Handle non-rectangular lb/b expressions.
	* omp-expand.c (expand_omp_for): Emit sorry_at for unsupported
	non-rectangular loop cases and assert for cases that can't be
	non-rectangular.
	* tree-pretty-print.c (dump_mem_ref): Formatting fix.
	(dump_omp_loop_non_rect_expr): New function.
	(dump_generic_node): Handle non-rectangular OpenMP loops.
	* tree-pretty-print.h (dump_omp_loop_non_rect_expr): Declare.
	* gimple-pretty-print.c (dump_gimple_omp_for): Handle non-rectangular
	OpenMP loops.

2020-06-16  Richard Biener  <rguenther@suse.de>

	PR middle-end/95690
	* varasm.c (build_constant_desc): Remove set_mem_attributes call.

2020-06-16  Kito Cheng  <kito.cheng@sifive.com>

	PR target/95683
	* config/riscv/riscv.c (riscv_gpr_save_operation_p): Remove
	assertion and turn it into a early exit check.

2020-06-15  Eric Botcazou  <ebotcazou@adacore.com>

	* gimplify.c (gimplify_init_constructor) <AGGREGATE_TYPE>: Declare
	new ENSURE_SINGLE_ACCESS constant and move variables down.  If it is
	true and all elements are zero, then always clear.  Return GS_ERROR
	if a temporary would be created for it and NOTIFY_TEMP_CREATION set.
	(gimplify_modify_expr_rhs) <VAR_DECL>: If the target is volatile but
	the type is aggregate non-addressable, ask gimplify_init_constructor
	whether it can generate a single access to the target.

2020-06-15  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-sra.c (propagate_subaccesses_from_rhs): When a non-scalar
	access on the LHS is replaced with a scalar access, propagate the
	TYPE_REVERSE_STORAGE_ORDER flag of the type of the original access.

2020-06-15  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.c (TARGET_HAVE_TLS): Remove
	TARGET_THREADPTR reference.
	(xtensa_tls_symbol_p, xtensa_tls_referenced_p): Use
	targetm.have_tls instead of TARGET_HAVE_TLS.
	(xtensa_option_override): Set targetm.have_tls to false in
	configurations without THREADPTR.

2020-06-15  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/elf.h (ASM_SPEC, LINK_SPEC): Pass ABI switch to
	assembler/linker.
	* config/xtensa/linux.h (ASM_SPEC, LINK_SPEC): Ditto.
	* config/xtensa/uclinux.h (ASM_SPEC, LINK_SPEC): Ditto.
	* config/xtensa/xtensa.c (xtensa_option_override): Initialize
	xtensa_windowed_abi if needed.
	* config/xtensa/xtensa.h (TARGET_WINDOWED_ABI_DEFAULT): New
	macro.
	(TARGET_WINDOWED_ABI): Redefine to xtensa_windowed_abi.
	* config/xtensa/xtensa.opt (xtensa_windowed_abi): New target
	option variable.
	(mabi=call0, mabi=windowed): New options.
	* doc/invoke.texi: Document new -mabi= Xtensa-specific options.

2020-06-15  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.c (xtensa_can_eliminate): New function.
	(TARGET_CAN_ELIMINATE): New macro.
	* config/xtensa/xtensa.h
	(XTENSA_WINDOWED_HARD_FRAME_POINTER_REGNUM)
	(XTENSA_CALL0_HARD_FRAME_POINTER_REGNUM): New macros.
	(HARD_FRAME_POINTER_REGNUM): Define using
	XTENSA_*_HARD_FRAME_POINTER_REGNUM.
	(ELIMINABLE_REGS): Replace lines with HARD_FRAME_POINTER_REGNUM
	by lines with XTENSA_WINDOWED_HARD_FRAME_POINTER_REGNUM and
	XTENSA_CALL0_HARD_FRAME_POINTER_REGNUM.

2020-06-15  Felix Yang  <felix.yang@huawei.com>

	* tree-vect-data-refs.c (vect_verify_datarefs_alignment): Rename
	parameter to loop_vinfo and update uses.  Use LOOP_VINFO_DATAREFS
	when possible.
	(vect_analyze_data_refs_alignment): Likewise, and use LOOP_VINFO_DDRS
	when possible.
	* tree-vect-loop.c (vect_dissolve_slp_only_groups): Use
	LOOP_VINFO_DATAREFS when possible.
	(update_epilogue_loop_vinfo): Likewise.

2020-06-15  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.c (riscv_gen_gpr_save_insn): Change type to
	unsigned for i.
	(riscv_gpr_save_operation_p): Change type to unsigned for i and
	len.

2020-06-15   Hongtao Liu  <hongtao.liu@intel.com>

	PR target/95488
	* config/i386/i386-expand.c (ix86_expand_vecmul_qihi): New
	function.
	* config/i386/i386-protos.h (ix86_expand_vecmul_qihi): Declare.
	* config/i386/sse.md (mul<mode>3): Drop mask_name since
	there's no real simd int8 multiplication instruction with
	mask. Also optimize it under TARGET_AVX512BW.
	(mulv8qi3): New expander.

2020-06-12  Marco Elver  <elver@google.com>

	* gimplify.c (gimplify_function_tree): Optimize and do not emit
	IFN_TSAN_FUNC_EXIT in a finally block if we do not need it.
	* params.opt: Add --param=tsan-instrument-func-entry-exit=.
	* tsan.c (instrument_memory_accesses): Make
	fentry_exit_instrument bool depend on new param.

2020-06-12  Felix Yang  <felix.yang@huawei.com>

	PR tree-optimization/95570
	* tree-vect-data-refs.c (vect_relevant_for_alignment_p): New function.
	(vect_verify_datarefs_alignment): Call it to filter out data references
	in the loop whose alignment is irrelevant.
	(vect_get_peeling_costs_all_drs): Likewise.
	(vect_peeling_supportable): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.

2020-06-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95633
	* tree-vect-stmts.c (vectorizable_condition): Properly
	guard the vec_else_clause access with EXTRACT_LAST_REDUCTION.

2020-06-12  Martin Liška  <mliska@suse.cz>

	* cgraphunit.c (process_symver_attribute): Wrap weakref keyword.
	* dbgcnt.c (dbg_cnt_set_limit_by_index): Do not print extra new
	line.
	* lto-wrapper.c (merge_and_complain): Wrap option names.

2020-06-12  Kewen Lin  <linkw@gcc.gnu.org>

	* tree-vect-loop-manip.c (vect_set_loop_controls_directly): Rename
	LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE.  Rename
	LOOP_VINFO_MASK_IV_TYPE to LOOP_VINFO_RGROUP_IV_TYPE.
	(vect_set_loop_condition_masked): Renamed to ...
	(vect_set_loop_condition_partial_vectors): ... this.  Rename
	LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE.  Rename
	vect_iv_limit_for_full_masking to vect_iv_limit_for_partial_vectors.
	(vect_set_loop_condition_unmasked): Renamed to ...
	(vect_set_loop_condition_normal): ... this.
	(vect_set_loop_condition): Rename vect_set_loop_condition_unmasked to
	vect_set_loop_condition_normal.  Rename vect_set_loop_condition_masked
	to vect_set_loop_condition_partial_vectors.
	(vect_prepare_for_masked_peels): Rename LOOP_VINFO_MASK_COMPARE_TYPE
	to LOOP_VINFO_RGROUP_COMPARE_TYPE.
	* tree-vect-loop.c (vect_known_niters_smaller_than_vf): New, factored
	out from ...
	(vect_analyze_loop_costing): ... this.
	(_loop_vec_info::_loop_vec_info): Rename mask_compare_type to
	compare_type.
	(vect_min_prec_for_max_niters): New, factored out from ...
	(vect_verify_full_masking): ... this.  Rename
	vect_iv_limit_for_full_masking to vect_iv_limit_for_partial_vectors.
	Rename LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE.
	Rename LOOP_VINFO_MASK_IV_TYPE to LOOP_VINFO_RGROUP_IV_TYPE.
	(vectorizable_reduction): Update some dumpings with partial
	vectors instead of fully-masked.
	(vectorizable_live_operation): Likewise.
	(vect_iv_limit_for_full_masking): Renamed to ...
	(vect_iv_limit_for_partial_vectors): ... this.
	* tree-vect-stmts.c (check_load_store_masking): Renamed to ...
	(check_load_store_for_partial_vectors): ... this.  Update some
	dumpings with partial vectors instead of fully-masked.
	(vectorizable_store): Rename check_load_store_masking to
	check_load_store_for_partial_vectors.
	(vectorizable_load): Likewise.
	* tree-vectorizer.h (LOOP_VINFO_MASK_COMPARE_TYPE): Renamed to ...
	(LOOP_VINFO_RGROUP_COMPARE_TYPE): ... this.
	(LOOP_VINFO_MASK_IV_TYPE): Renamed to ...
	(LOOP_VINFO_RGROUP_IV_TYPE): ... this.
	(vect_iv_limit_for_full_masking): Renamed to ...
	(vect_iv_limit_for_partial_vectors): this.
	(_loop_vec_info): Rename mask_compare_type to rgroup_compare_type.
	Rename iv_type to rgroup_iv_type.

2020-06-12  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.h (insn_gen_fn::f0, insn_gen_fn::f1, insn_gen_fn::f2)
	(insn_gen_fn::f3, insn_gen_fn::f4, insn_gen_fn::f5, insn_gen_fn::f6)
	(insn_gen_fn::f7, insn_gen_fn::f8, insn_gen_fn::f9, insn_gen_fn::f10)
	(insn_gen_fn::f11, insn_gen_fn::f12, insn_gen_fn::f13)
	(insn_gen_fn::f14, insn_gen_fn::f15, insn_gen_fn::f16): Delete.
	(insn_gen_fn::operator()): Replace overloaded definitions with
	a parameter-pack version.

2020-06-12  H.J. Lu  <hjl.tools@gmail.com>

	PR target/93492
	* config/i386/i386-features.c (rest_of_insert_endbranch):
	Renamed to ...
	(rest_of_insert_endbr_and_patchable_area): Change return type
	to void. Add need_endbr and patchable_area_size arguments.
	Don't call timevar_push nor timevar_pop.  Replace
	endbr_queued_at_entrance with insn_queued_at_entrance.  Insert
	UNSPECV_PATCHABLE_AREA for patchable area.
	(pass_data_insert_endbranch): Renamed to ...
	(pass_data_insert_endbr_and_patchable_area): This.  Change
	pass name to endbr_and_patchable_area.
	(pass_insert_endbranch): Renamed to ...
	(pass_insert_endbr_and_patchable_area): This.  Add need_endbr
	and patchable_area_size;.
	(pass_insert_endbr_and_patchable_area::gate): Set and check
	need_endbr and patchable_area_size.
	(pass_insert_endbr_and_patchable_area::execute): Call
	timevar_push and timevar_pop.  Pass need_endbr and
	patchable_area_size to rest_of_insert_endbr_and_patchable_area.
	(make_pass_insert_endbranch): Renamed to ...
	(make_pass_insert_endbr_and_patchable_area): This.
	* config/i386/i386-passes.def: Replace pass_insert_endbranch
	with pass_insert_endbr_and_patchable_area.
	* config/i386/i386-protos.h (ix86_output_patchable_area): New.
	(make_pass_insert_endbranch): Renamed to ...
	(make_pass_insert_endbr_and_patchable_area): This.
	* config/i386/i386.c (ix86_asm_output_function_label): Set
	function_label_emitted to true.
	(ix86_print_patchable_function_entry): New function.
	(ix86_output_patchable_area): Likewise.
	(x86_function_profiler): Replace endbr_queued_at_entrance with
	insn_queued_at_entrance.  Generate ENDBR only for TYPE_ENDBR.
	Call ix86_output_patchable_area to generate patchable area if
	needed.
	(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): New.
	* config/i386/i386.h (queued_insn_type): New.
	(machine_function): Add function_label_emitted.  Replace
	endbr_queued_at_entrance with insn_queued_at_entrance.
	* config/i386/i386.md (UNSPECV_PATCHABLE_AREA): New.
	(patchable_area): New.

2020-06-11  Martin Liska  <mliska@suse.cz>

	* config/rs6000/rs6000.c (rs6000_density_test): Fix GNU coding
	style.

2020-06-11  Martin Liska  <mliska@suse.cz>

	PR target/95627
	* config/rs6000/rs6000.c (rs6000_density_test): Skip debug
	statements.

2020-06-11  Martin Liska  <mliska@suse.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/95634
	* asan.c (asan_emit_stack_protection): Fix emission for ilp32
	by using Pmode instead of ptr_mode.

2020-06-11  Kewen Lin  <linkw@gcc.gnu.org>

	* tree-vect-loop-manip.c (vect_set_loop_mask): Renamed to ...
	(vect_set_loop_control): ... this.
	(vect_maybe_permute_loop_masks): Rename rgroup_masks related things.
	(vect_set_loop_masks_directly): Renamed to ...
	(vect_set_loop_controls_directly): ... this.  Also rename some
	variables with ctrl instead of mask.  Rename vect_set_loop_mask to
	vect_set_loop_control.
	(vect_set_loop_condition_masked): Rename rgroup_masks related things.
	Also rename some variables with ctrl instead of mask.
	* tree-vect-loop.c (release_vec_loop_masks): Renamed to ...
	(release_vec_loop_controls): ... this.  Rename rgroup_masks related
	things.
	(_loop_vec_info::~_loop_vec_info): Rename release_vec_loop_masks to
	release_vec_loop_controls.
	(can_produce_all_loop_masks_p): Rename rgroup_masks related things.
	(vect_get_max_nscalars_per_iter): Likewise.
	(vect_estimate_min_profitable_iters): Likewise.
	(vect_record_loop_mask): Likewise.
	(vect_get_loop_mask): Likewise.
	* tree-vectorizer.h (struct rgroup_masks): Renamed to ...
	(struct rgroup_controls): ... this.  Also rename mask_type
	to type and rename masks to controls.

2020-06-11  Kewen Lin  <linkw@gcc.gnu.org>

	* tree-vect-loop-manip.c (vect_set_loop_condition): Rename
	LOOP_VINFO_FULLY_MASKED_P to LOOP_VINFO_USING_PARTIAL_VECTORS_P.
	(vect_gen_vector_loop_niters): Likewise.
	(vect_do_peeling): Likewise.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Rename
	fully_masked_p to using_partial_vectors_p.
	(vect_analyze_loop_costing): Rename LOOP_VINFO_FULLY_MASKED_P to
	LOOP_VINFO_USING_PARTIAL_VECTORS_P.
	(determine_peel_for_niter): Likewise.
	(vect_estimate_min_profitable_iters): Likewise.
	(vect_transform_loop): Likewise.
	* tree-vectorizer.h (LOOP_VINFO_FULLY_MASKED_P): Updated.
	(LOOP_VINFO_USING_PARTIAL_VECTORS_P): New macro.

2020-06-11  Kewen Lin  <linkw@gcc.gnu.org>

	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Rename
	can_fully_mask_p to can_use_partial_vectors_p.
	(vect_analyze_loop_2): Rename LOOP_VINFO_CAN_FULLY_MASK_P to
	LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P.  Rename saved_can_fully_mask_p
	to saved_can_use_partial_vectors_p.
	(vectorizable_reduction): Rename LOOP_VINFO_CAN_FULLY_MASK_P to
	LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P.
	(vectorizable_live_operation): Likewise.
	* tree-vect-stmts.c (permute_vec_elements): Likewise.
	(check_load_store_masking): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	* tree-vectorizer.h (LOOP_VINFO_CAN_FULLY_MASK_P): Renamed to ...
	(LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P): ... this.
	(_loop_vec_info): Rename can_fully_mask_p to can_use_partial_vectors_p.

2020-06-11  Martin Liska  <mliska@suse.cz>

	* optc-save-gen.awk: Quote error string.

2020-06-11  Alexandre Oliva  <oliva@adacore.com>

	* print-rtl.c (print_mem_expr): Enable TDF_SLIM in dump_flags.

2020-06-11  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv-protos.h (riscv_output_gpr_save): Remove.
	* config/riscv/riscv-sr.c (riscv_sr_match_prologue): Update
	value.
	* config/riscv/riscv.c (riscv_output_gpr_save): Remove.
	* config/riscv/riscv.md (gpr_save): Update output asm pattern.

2020-06-11  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/predicates.md (gpr_save_operation): New.
	* config/riscv/riscv-protos.h (riscv_gen_gpr_save_insn): New.
	(riscv_gpr_save_operation_p): Ditto.
	* config/riscv/riscv-sr.c (riscv_remove_unneeded_save_restore_calls):
	Ignore USEs for gpr_save patter.
	* config/riscv/riscv.c (gpr_save_reg_order): New.
	(riscv_expand_prologue): Use riscv_gen_gpr_save_insn to gen gpr_save.
	(riscv_gen_gpr_save_insn): New.
	(riscv_gpr_save_operation_p): Ditto.
	* config/riscv/riscv.md (S3_REGNUM): New.
	(S4_REGNUM): Ditto.
	(S5_REGNUM): Ditto.
	(S6_REGNUM): Ditto.
	(S7_REGNUM): Ditto.
	(S8_REGNUM): Ditto.
	(S9_REGNUM): Ditto.
	(S10_REGNUM): Ditto.
	(S11_REGNUM): Ditto.
	(gpr_save): Model USEs correctly.

2020-06-10  Martin Sebor  <msebor@redhat.com>

	PR middle-end/95353
	PR middle-end/92939
	* builtins.c (inform_access): New function.
	(check_access): Call it.  Add argument.
	(addr_decl_size): Remove.
	(get_range): New function.
	(compute_objsize): New overload.  Only use compute_builtin_object_size
	with raw memory function.
	(check_memop_access): Pass new argument to compute_objsize and
	check_access.
	(expand_builtin_memchr, expand_builtin_strcat): Same.
	(expand_builtin_strcpy, expand_builtin_stpcpy_1): Same.
	(expand_builtin_stpncpy, check_strncat_sizes): Same.
	(expand_builtin_strncat, expand_builtin_strncpy): Same.
	(expand_builtin_memcmp): Same.
	* builtins.h (check_nul_terminated_array): Declare extern.
	(check_access): Add argument.
	(struct access_ref, struct access_data): New structs.
	* gimple-ssa-warn-restrict.c (clamp_offset): New helper.
	(builtin_access::overlap): Call it.
	* tree-object-size.c (decl_init_size): Declare extern.
	(addr_object_size): Correct offset computation.
	* tree-object-size.h (decl_init_size): Declare.
	* tree-ssa-strlen.c (handle_integral_assign): Remove a call
	to maybe_warn_overflow when assigning to an SSA_NAME.

2020-06-10  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_determine_vectorization_factor):
	Skip debug stmts.
	(_loop_vec_info::_loop_vec_info): Likewise.
	(vect_update_vf_for_slp): Likewise.
	(vect_analyze_loop_operations): Likewise.
	(update_epilogue_loop_vinfo): Likewise.
	* tree-vect-patterns.c (vect_determine_precisions): Likewise.
	(vect_pattern_recog): Likewise.
	* tree-vect-slp.c (vect_detect_hybrid_slp): Likewise.
	(_bb_vec_info::_bb_vec_info): Likewise.
	* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized):
	Likewise.

2020-06-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95576
	* tree-vect-slp.c (vect_slp_bb): Skip leading debug stmts.

2020-06-10  Haijian Zhang  <z.zhanghaijian@huawei.com>

	PR target/95523
	* config/aarch64/aarch64-sve-builtins.h
	(sve_switcher::m_old_maximum_field_alignment): New member.
	* config/aarch64/aarch64-sve-builtins.cc
	(sve_switcher::sve_switcher): Save maximum_field_alignment in
	m_old_maximum_field_alignment and clear maximum_field_alignment.
	(sve_switcher::~sve_switcher): Restore maximum_field_alignment.

2020-06-10  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::vec_stmts): Make it a vector
	of gimple * stmts.
	(_stmt_vec_info::vec_stmts): Likewise.
	(vec_info::stmt_vec_info_ro): New flag.
	(vect_finish_replace_stmt): Adjust declaration.
	(vect_finish_stmt_generation): Likewise.
	(vectorizable_induction): Likewise.
	(vect_transform_reduction): Likewise.
	(vectorizable_lc_phi): Likewise.
	* tree-vect-data-refs.c (vect_create_data_ref_ptr): Do not
	allocate stmt infos for increments.
	(vect_record_grouped_load_vectors): Adjust.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	(vect_transform_reduction): Likewise.
	(vect_transform_cycle_phi): Likewise.
	(vectorizable_lc_phi): Likewise.
	(vectorizable_induction): Likewise.
	(vectorizable_live_operation): Likewise.
	(vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_pattern_recog): Set stmt_vec_info_ro.
	* tree-vect-slp.c (vect_get_slp_vect_def): Adjust.
	(vect_get_slp_defs): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	(vect_schedule_slp_instance): Likewise.
	(vectorize_slp_instance_root_stmt): Likewise.
	* tree-vect-stmts.c (vect_get_vec_defs_for_operand): Likewise.
	(vect_finish_stmt_generation_1): Do not allocate a stmt info.
	(vect_finish_replace_stmt): Do not return anything.
	(vect_finish_stmt_generation): Likewise.
	(vect_build_gather_load_calls): Adjust.
	(vectorizable_bswap): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(vect_create_vectorized_demotion_stmts): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_scan_store): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.
	(vect_transform_stmt): Likewise.
	* tree-vectorizer.c (vec_info::vec_info): Initialize
	stmt_vec_info_ro.
	(vec_info::replace_stmt): Copy over stmt UID rather than
	unsetting/setting a stmt info allocating a new UID.
	(vec_info::set_vinfo_for_stmt): Assert !stmt_vec_info_ro.

2020-06-10  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-loop-versioning.cc (loop_versioning::name_prop::get_value):
	Add stmt parameter.
	* gimple-ssa-evrp.c (class evrp_folder): New.
	(class evrp_dom_walker): Remove.
	(execute_early_vrp): Use evrp_folder instead of evrp_dom_walker.
	* tree-ssa-ccp.c (ccp_folder::get_value): Add stmt parameter.
	* tree-ssa-copy.c (copy_folder::get_value): Same.
	* tree-ssa-propagate.c (substitute_and_fold_engine::replace_uses_in):
	Pass stmt to get_value.
	(substitute_and_fold_engine::replace_phi_args_in): Same.
	(substitute_and_fold_dom_walker::after_dom_children): Call
	post_fold_bb.
	(substitute_and_fold_dom_walker::foreach_new_stmt_in_bb): New.
	(substitute_and_fold_dom_walker::propagate_into_phi_args): New.
	(substitute_and_fold_dom_walker::before_dom_children): Adjust to
	call virtual functions for folding, pre_folding, and post folding.
	Call get_value with PHI.  Tweak dump.
	* tree-ssa-propagate.h (class substitute_and_fold_engine):
	New argument to get_value.
	New virtual function pre_fold_bb.
	New virtual function post_fold_bb.
	New virtual function pre_fold_stmt.
	New virtual function post_new_stmt.
	New function propagate_into_phi_args.
	* tree-vrp.c (vrp_folder::get_value): Add stmt argument.
	* vr-values.c (vr_values::extract_range_from_stmt): Adjust dump
	output.
	(vr_values::fold_cond): New.
	(vr_values::simplify_cond_using_ranges_1): Call fold_cond.
	* vr-values.h (class vr_values): Add
	simplify_cond_using_ranges_when_edge_is_known.

2020-06-10  Martin Liska  <mliska@suse.cz>

	PR sanitizer/94910
	* asan.c (asan_emit_stack_protection): Emit
	also **SavedFlagPtr(FakeStack, class_id) = 0 in order to release
	a stack frame.

2020-06-10  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.c (aarch64_rtx_mult_cost): Adjust costs for mul.

2020-06-10  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_vfa_access_size): Adjust.
	(vect_record_grouped_load_vectors): Likewise.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	(vect_transform_reduction): Likewise.
	(vect_transform_cycle_phi): Likewise.
	(vectorizable_lc_phi): Likewise.
	(vectorizable_induction): Likewise.
	(vectorizable_live_operation): Likewise.
	(vect_transform_loop): Likewise.
	* tree-vect-slp.c (vect_get_slp_defs): New function, split out
	from overload.
	* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Remove.
	(vect_get_vec_def_for_operand): Likewise.
	(vect_get_vec_def_for_stmt_copy): Likewise.
	(vect_get_vec_defs_for_stmt_copy): Likewise.
	(vect_get_vec_defs_for_operand): New function.
	(vect_get_vec_defs): Likewise.
	(vect_build_gather_load_calls): Adjust.
	(vect_get_gather_scatter_ops): Likewise.
	(vectorizable_bswap): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(vect_get_loop_based_defs): Remove.
	(vect_create_vectorized_demotion_stmts): Adjust.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_scan_store): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.
	(vect_transform_stmt): Adjust and remove no longer applicable
	sanity checks.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Initialize
	STMT_VINFO_VEC_STMTS.
	(vec_info::free_stmt_vec_info): Relase it.
	* tree-vectorizer.h (_stmt_vec_info::vectorized_stmt): Remove.
	(_stmt_vec_info::vec_stmts): Add.
	(STMT_VINFO_VEC_STMT): Remove.
	(STMT_VINFO_VEC_STMTS): New.
	(vect_get_vec_def_for_operand_1): Remove.
	(vect_get_vec_def_for_operand): Likewise.
	(vect_get_vec_defs_for_stmt_copy): Likewise.
	(vect_get_vec_def_for_stmt_copy): Likewise.
	(vect_get_vec_defs): New overloads.
	(vect_get_vec_defs_for_operand): New.
	(vect_get_slp_defs): Declare.

2020-06-10  Qian Chao  <qianchao9@huawei.com>

	PR tree-optimization/95569
	* trans-mem.c (expand_assign_tm): Ensure that rtmp is marked TREE_ADDRESSABLE.

2020-06-10  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* optc-save-gen.awk: Generate new function cl_optimization_compare.
	* opth-gen.awk: Generate declaration of the function.

2020-06-09  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/ppc-auxv.h (PPC_PLATFORM_FUTURE): Allocate
	'future' PowerPC platform.
	(PPC_FEATURE2_ARCH_3_1): New HWCAP2 bit for ISA 3.1.
	(PPC_FEATURE2_MMA): New HWCAP2 bit for MMA.
	* config/rs6000/rs6000-call.c (cpu_supports_info): Add ISA 3.1 and
	MMA HWCAP2 bits.
	* config/rs6000/rs6000.c (CLONE_ISA_3_1): New clone support.
	(rs6000_clone_map): Add 'future' system target_clones support.

2020-06-09  Michael Kuhn  <gcc@ikkoku.de>

	* Makefile.in (ZSTD_INC): Define.
	(ZSTD_LIB): Include ZSTD_LDFLAGS.
	(CFLAGS-lto-compress.o): Add ZSTD_INC.
	* configure.ac (ZSTD_CPPFLAGS, ZSTD_LDFLAGS): New variables for
	AC_SUBST.
	* configure: Rebuilt.

2020-06-09  Jason Merrill  <jason@redhat.com>

	PR c++/95552
	* tree.c (walk_tree_1): Call func on the TYPE_DECL of a DECL_EXPR.

2020-06-09  Marco Elver  <elver@google.com>

	* params.opt: Define --param=tsan-distinguish-volatile=[0,1].
	* sanitizer.def (BUILT_IN_TSAN_VOLATILE_READ1): Define new
	builtin for volatile instrumentation of reads/writes.
	(BUILT_IN_TSAN_VOLATILE_READ2): Likewise.
	(BUILT_IN_TSAN_VOLATILE_READ4): Likewise.
	(BUILT_IN_TSAN_VOLATILE_READ8): Likewise.
	(BUILT_IN_TSAN_VOLATILE_READ16): Likewise.
	(BUILT_IN_TSAN_VOLATILE_WRITE1): Likewise.
	(BUILT_IN_TSAN_VOLATILE_WRITE2): Likewise.
	(BUILT_IN_TSAN_VOLATILE_WRITE4): Likewise.
	(BUILT_IN_TSAN_VOLATILE_WRITE8): Likewise.
	(BUILT_IN_TSAN_VOLATILE_WRITE16): Likewise.
	* tsan.c (get_memory_access_decl): Argument if access is
	volatile. If param tsan-distinguish-volatile is non-zero, and
	access if volatile, return volatile instrumentation decl.
	(instrument_expr): Check if access is volatile.

2020-06-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_induction): Remove dead code.

2020-06-09  Tobias Burnus  <tobias@codesourcery.com>

	* omp-offload.c (add_decls_addresses_to_decl_constructor,
	omp_finish_file): With in_lto_p, stream out all offload-table
	items even if the symtab_node does not exist.

2020-06-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_transform_stmt): Remove dead code.

2020-06-09  Martin Liska  <mliska@suse.cz>

	* gcov-dump.c (print_usage): Fix spacing for --raw option
	in --help.

2020-06-09  Martin Liska  <mliska@suse.cz>

	* cif-code.def (ATTRIBUTE_MISMATCH): Rename to...
	(SANITIZE_ATTRIBUTE_MISMATCH): ...this.
	* ipa-inline.c (sanitize_attrs_match_for_inline_p):
	Handle all sanitizer options.
	(can_inline_edge_p): Use renamed CIF_* enum value.

2020-06-09  Joe Ramsay  <joe.ramsay@arm.com>

	* config/aarch64/aarch64-sve.md (<optab><mode>2): Add support for
	unpacked vectors.
	(@aarch64_pred_<optab><mode>): Add support for unpacked vectors.
	(@aarch64_bic<mode>): Enable unpacked BIC.
	(*bic<mode>3): Enable unpacked BIC.

2020-06-09  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/95365
	* doc/gcov.texi: Compile and link one example in 2 steps.

2020-06-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/95527
	* match.pd (__builtin_ffs (X) cmp CST): New optimizations.

2020-06-09  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/ppc-auxv.h (PPC_PLATFORM_FUTURE): Allocate
	'future' PowerPC platform.
	(PPC_FEATURE2_ARCH_3_1): New HWCAP2 bit for ISA 3.1.
	(PPC_FEATURE2_MMA): New HWCAP2 bit for MMA.
	* config/rs6000/rs6000-call.c (cpu_supports_info): Add ISA 3.1 and
	MMA HWCAP2 bits.
	* config/rs6000/rs6000.c (CLONE_ISA_3_1): New clone support.
	(rs6000_clone_map): Add 'future' system target_clones support.

2020-06-08  Tobias Burnus  <tobias@codesourcery.com>

	PR lto/94848
	PR middle-end/95551
	* omp-offload.c (add_decls_addresses_to_decl_constructor,
	omp_finish_file): Skip removed items.
	* lto-cgraph.c (output_offload_tables): Likewise; set force_output
	to this node for variables and functions.

2020-06-08  Jason Merrill  <jason@redhat.com>

	* aclocal.m4: Remove ax_cxx_compile_stdcxx.m4.
	* configure.ac: Remove AX_CXX_COMPILE_STDCXX.
	* configure: Regenerate.

2020-06-08  Martin Sebor  <msebor@redhat.com>

	* postreload.c (reload_cse_simplify_operands): Clear first array element
	before using it.  Assert a precondition.

2020-06-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/95528
	* tree-ssa-forwprop.c (simplify_vector_constructor): Don't use
	VEC_UNPACK*_EXPR or VEC_PACK_TRUNC_EXPR with scalar modes unless the
	type is vector boolean.

2020-06-08  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.c (aarch64_layout_frame): Expand comments.

2020-06-08  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/predicates.md (vfp_register_operand): Use VFP_HI_REGS
	instead of VFP_REGS.

2020-06-08  Martin Liska  <mliska@suse.cz>

	* config/rs6000/vector.md: Replace FAIL with gcc_unreachable
	in all vcond* patterns.

2020-06-08  Christophe Lyon  <christophe.lyon@linaro.org>

	* common/config/arm/arm-common.c (INCLUDE_ALGORITHM):
	Define. No longer include <algorithm>.

2020-06-07  Roger Sayle  <roger@nextmovesoftware.com>

	* config/i386/i386.md (paritydi2, paritysi2): Expand reduction
	via shift and xor to an USPEC PARITY matching a parityhi2_cmp.
	(paritydi2_cmp, paritysi2_cmp): Delete these define_insn_and_split.
	(parityhi2, parityqi2): New expanders.
	(parityhi2_cmp): Implement set parity flag with xorb insn.
	(parityqi2_cmp): Implement set parity flag with testb insn.
	New peephole2s to use these insns (UNSPEC PARITY) when appropriate.

2020-06-07  Jiufu Guo  <guojiufu@linux.ibm.com>

	PR target/95018
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Override flag_cunroll_grow_size.

2020-06-07  Jiufu Guo  <guojiufu@linux.ibm.com>

	* common.opt (flag_cunroll_grow_size): New flag.
	* toplev.c (process_options): Set flag_cunroll_grow_size.
	* tree-ssa-loop-ivcanon.c (pass_complete_unroll::execute):
	Use flag_cunroll_grow_size.

2020-06-06  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/95548
	* ipa-devirt.c (struct odr_enum_val): Turn values to wide_int.
	(ipa_odr_summary_write): Update streaming.
	(ipa_odr_read_section): Update streaming.

2020-06-06  Alexandre Oliva  <oliva@adacore.com>

	PR driver/95456
	* gcc.c (do_spec_1): Don't call memcpy (_, NULL, 0).

2020-06-05  Thomas Schwinge  <thomas@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	* gimplify.c (gimplify_adjust_omp_clauses): Remove
	'GOMP_MAP_STRUCT' mapping from OpenACC 'exit data' directives.

2020-06-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95539
	* tree-vect-data-refs.c
	(vect_slp_analyze_and_verify_instance_alignment): Use
	SLP_TREE_REPRESENTATIVE for the data-ref check.
	* tree-vect-stmts.c (vectorizable_load): Reset stmt_info
	back to the first scalar stmt rather than the
	SLP_TREE_REPRESENTATIVE to match previous behavior.

2020-06-05  Felix Yang  <felix.yang@huawei.com>

	PR target/95254
	* expr.c (emit_move_insn): Check src and dest of the copy to see
	if one or both of them are subregs, try to remove the subregs when
	innermode and outermode are equal in size and the mode change involves
	an implicit round trip through memory.

2020-06-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/95535
	* config/i386/i386.md (*ctzsi2_zext, *clzsi2_lzcnt_zext): New
	define_insn_and_split patterns.
	(*ctzsi2_zext_falsedep, *clzsi2_lzcnt_zext_falsedep): New
	define_insn patterns.

2020-06-05  Jonathan Wakely  <jwakely@redhat.com>

	* alloc-pool.h (object_allocator::remove_raw): New.
	* tree-ssa-math-opts.c (struct occurrence): Use NSMDI.
	(occurrence::occurrence): Add.
	(occurrence::~occurrence): Likewise.
	(occurrence::new): Likewise.
	(occurrence::delete): Likewise.
	(occ_new): Remove.
	(insert_bb): Use new occurence (...) instead of occ_new.
	(register_division_in): Likewise.
	(free_bb): Use delete occ instead of manually removing
	from the pool.

2020-06-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/95493
	* cfgexpand.c (expand_debug_expr): Avoid calling
	set_mem_attributes_minus_bitpos when we were expanding
	an SSA name.
	* emit-rtl.c (set_mem_attributes_minus_bitpos): Remove
	ARRAY_REF special-casing, add CONSTRUCTOR to the set of
	special-cases we do not want MEM_EXPRs for.  Assert
	we end up with reasonable MEM_EXPRs.

2020-06-05  Lili Cui  <lili.cui@intel.com>

	PR target/95525
	* config/i386/i386.h (PTA_WAITPKG): Change bitmask value.

2020-06-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/10138
	PR middle-end/95136
	* attribs.c (init_attr_rdwr_indices): Move function here.
	* attribs.h (rdwr_access_hash, rdwr_map): Define.
	(attr_access): Add 'none'.
	(init_attr_rdwr_indices): Declared function.
	* builtins.c (warn_for_access)): New function.
	(check_access): Call it.
	* builtins.h (checK-access): Add an optional argument.
	* calls.c (rdwr_access_hash, rdwr_map): Move to attribs.h.
	(init_attr_rdwr_indices): Declare extern.
	(append_attrname): Handle attr_access::none.
	(maybe_warn_rdwr_sizes): Same.
	(initialize_argument_information): Update comments.
	* doc/extend.texi (attribute access): Document 'none'.
	* tree-ssa-uninit.c (struct wlimits): New.
	(maybe_warn_operand): New function.
	(maybe_warn_pass_by_reference): Same.
	(warn_uninitialized_vars): Refactor code into maybe_warn_operand.
	Also call for function calls.
	(pass_late_warn_uninitialized::execute): Adjust comments.
	(execute_early_warn_uninitialized): Same.

2020-06-04  Vladimir Makarov  <vmakarov@redhat.com>

	PR middle-end/95464
	* lra.c (lra_emit_move): Add processing STRICT_LOW_PART.
	* lra-constraints.c (match_reload): Use STRICT_LOW_PART in output
	reload if the original insn has it too.

2020-06-04  Richard Biener  <rguenther@suse.de>

	* config/aarch64/aarch64.c (aarch64_gimplify_va_arg_expr):
	Ensure that tmp_ha is marked TREE_ADDRESSABLE.

2020-06-04  Martin Jambor  <mjambor@suse.cz>

	PR ipa/95113
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Move non-call
	exceptions check to...
	* tree-eh.c (stmt_unremovable_because_of_non_call_eh_p): ...this
	new function.
	* tree-eh.h (stmt_unremovable_because_of_non_call_eh_p): Declare it.
	* ipa-sra.c (isra_track_scalar_value_uses): Use it.  New parameter
	fun.

2020-06-04  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/94735
	* config/arm/predicates.md (mve_scatter_memory): Define to
	match (mem (reg)) for scatter store memory.
	* config/arm/mve.md (mve_vstrbq_scatter_offset_<supf><mode>): Modify
	define_insn to define_expand.
	(mve_vstrbq_scatter_offset_p_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_offset_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_shifted_offset_<supf><mode>): Likewise.
	(mve_vstrdq_scatter_offset_p_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_offset_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_shifted_offset_p_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_shifted_offset_<supf>v2di): Likewise.
	(mve_vstrhq_scatter_offset_fv8hf): Likewise.
	(mve_vstrhq_scatter_offset_p_fv8hf): Likewise.
	(mve_vstrhq_scatter_shifted_offset_fv8hf): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_fv8hf): Likewise.
	(mve_vstrwq_scatter_offset_fv4sf): Likewise.
	(mve_vstrwq_scatter_offset_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_offset_p_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_offset_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_shifted_offset_fv4sf): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_shifted_offset_<supf>v4si): Likewise.
	(mve_vstrbq_scatter_offset_<supf><mode>_insn): Define insn for scatter
	stores.
	(mve_vstrbq_scatter_offset_p_<supf><mode>_insn): Likewise.
	(mve_vstrhq_scatter_offset_<supf><mode>_insn): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_<supf><mode>_insn): Likewise.
	(mve_vstrhq_scatter_shifted_offset_<supf><mode>_insn): Likewise.
	(mve_vstrdq_scatter_offset_p_<supf>v2di_insn): Likewise.
	(mve_vstrdq_scatter_offset_<supf>v2di_insn): Likewise.
	(mve_vstrdq_scatter_shifted_offset_p_<supf>v2di_insn): Likewise.
	(mve_vstrdq_scatter_shifted_offset_<supf>v2di_insn): Likewise.
	(mve_vstrhq_scatter_offset_fv8hf_insn): Likewise.
	(mve_vstrhq_scatter_offset_p_fv8hf_insn): Likewise.
	(mve_vstrhq_scatter_shifted_offset_fv8hf_insn): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_fv8hf_insn): Likewise.
	(mve_vstrwq_scatter_offset_fv4sf_insn): Likewise.
	(mve_vstrwq_scatter_offset_p_fv4sf_insn): Likewise.
	(mve_vstrwq_scatter_offset_p_<supf>v4si_insn): Likewise.
	(mve_vstrwq_scatter_offset_<supf>v4si_insn): Likewise.
	(mve_vstrwq_scatter_shifted_offset_fv4sf_insn): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_fv4sf_insn): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_<supf>v4si_insn): Likewise.
	(mve_vstrwq_scatter_shifted_offset_<supf>v4si_insn): Likewise.

2020-06-04  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (__arm_vbicq_n_u16): Correct the intrinsic
	arguments.
	(__arm_vbicq_n_s16): Likewise.
	(__arm_vbicq_n_u32): Likewise.
	(__arm_vbicq_n_s32): Likewise.
	(__arm_vbicq): Modify polymorphic variant.

2020-06-04  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_get_slp_vect_def): Declare.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use it.
	* tree-vect-stmts.c (vect_transform_stmt): Likewise.
	(vect_is_simple_use): Use SLP_TREE_REPRESENTATIVE.
	* tree-vect-slp.c (vect_get_slp_vect_defs): Fold into single
	use ...
	(vect_get_slp_defs): ... here.
	(vect_get_slp_vect_def): New function.

2020-06-04  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::lanes): New.
	(SLP_TREE_LANES): Likewise.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use it.
	(vectorizable_reduction): Likewise.
	(vect_transform_cycle_phi): Likewise.
	(vectorizable_induction): Likewise.
	(vectorizable_live_operation): Likewise.
	* tree-vect-slp.c (_slp_tree::_slp_tree): Initialize lanes.
	(vect_create_new_slp_node): Likewise.
	(slp_copy_subtree): Copy it.
	(vect_optimize_slp): Use it.
	(vect_slp_analyze_node_operations_1): Likewise.
	(vect_slp_convert_to_external): Likewise.
	(vect_bb_vectorization_profitable_p): Likewise.
	* tree-vect-stmts.c (vectorizable_load): Likewise.
	(get_vectype_for_scalar_type): Likewise.

2020-06-04  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_update_all_shared_vectypes): Remove.
	(vect_build_slp_tree_2): Simplify building all external op
	nodes from scalars.
	(vect_slp_analyze_node_operations): Remove push/pop of
	STMT_VINFO_DEF_TYPE.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (ect_check_store_rhs): Pass in the
	stmt_info, use the vect_is_simple_use overload combining
	SLP and stmt_info analysis.
	(vect_is_simple_cond): Likewise.
	(vectorizable_store): Adjust.
	(vectorizable_condition): Likewise.
	(vect_is_simple_use): Fully handle invariant SLP nodes
	here.  Amend stmt_info operand extraction with COND_EXPR
	and masked stores.
	* tree-vect-loop.c (vectorizable_reduction): Deal with
	COND_EXPR representation ugliness.

2020-06-04  Hongtao Liu  <hongtao.liu@inte.com>

	PR target/95254
	* config/i386/sse.md (*vcvtps2ph_store<merge_mask_name>):
	Refine from *vcvtps2ph_store<mask_name>.
	(vcvtps2ph256<mask_name>): Refine constraint from vm to v.
	(<mask_codefor>avx512f_vcvtps2ph512<mask_name>): Ditto.
	(*vcvtps2ph256<merge_mask_name>): New define_insn.
	(*avx512f_vcvtps2ph512<merge_mask_name>): Ditto.
	* config/i386/subst.md (merge_mask): New define_subst.
	(merge_mask_name): New define_subst_attr.
	(merge_mask_operand3): Ditto.

2020-06-04  Hao Liu  <hliu@os.amperecomputing.com>

	PR tree-optimization/89430
	* tree-ssa-phiopt.c
	(struct name_to_bb): Rename to ref_to_bb; add a new field exp;
	remove ssa_name_ver, store, offset fields.
	(struct ssa_names_hasher): Rename to refs_hasher; update functions.
	(class nontrapping_dom_walker): Rename m_seen_ssa_names to m_seen_refs.
	(nontrapping_dom_walker::add_or_mark_expr): Extend to support ARRAY_REFs
	and COMPONENT_REFs.

2020-06-04  Andreas Schwab  <schwab@suse.de>

	PR target/95154
	* config/ia64/ia64.h (ASM_OUTPUT_FDESC): Call assemble_external.

2020-06-04  Hongtao.liu  <hongtao.liu@intel.com>

	* config/i386/sse.md (pmov_dst_3_lower): New mode attribute.
	(trunc<mode><pmov_dst_3_lower>2): Refine from
	trunc<mode><pmov_dst_3>2.

2020-06-03  Vitor Guidi  <vitor.guidi@usp.br>

	* match.pd (tanh/sinh -> 1/cosh): New simplification.

2020-06-03  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/95347
	* config/rs6000/rs6000.c (is_stfs_insn): Rename to
	is_lfs_stfs_insn and make it recognize lfs as well.
	(prefixed_store_p): Use is_lfs_stfs_insn().
	(prefixed_load_p): Use is_lfs_stfs_insn() to recognize lfs.

2020-06-03  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-devirt.c: Include data-streamer.h, lto-streamer.h and
	streamer-hooks.h.
	(odr_enums): New static var.
	(struct odr_enum_val): New struct.
	(class odr_enum): New struct.
	(odr_enum_map): New hashtable.
	(odr_types_equivalent_p): Drop code testing TYPE_VALUES.
	(add_type_duplicate): Likewise.
	(free_odr_warning_data): Do not free TYPE_VALUES.
	(register_odr_enum): New function.
	(ipa_odr_summary_write): New function.
	(ipa_odr_read_section): New function.
	(ipa_odr_summary_read): New function.
	(class pass_ipa_odr): New pass.
	(make_pass_ipa_odr): New function.
	* ipa-utils.h (register_odr_enum): Declare.
	* lto-section-in.c: (lto_section_name): Add odr_types section.
	* lto-streamer.h (enum lto_section_type): Add odr_types section.
	* passes.def: Add odr_types pass.
	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not stream
	TYPE_VALUES.
	(hash_tree): Likewise.
	* tree-streamer-in.c (lto_input_ts_type_non_common_tree_pointers):
	Likewise.
	* tree-streamer-out.c (write_ts_type_non_common_tree_pointers):
	Likewise.
	* timevar.def (TV_IPA_ODR): New timervar.
	* tree-pass.h (make_pass_ipa_odr): Declare.
	* tree.c (free_lang_data_in_type): Regiser ODR types.

2020-06-03  Romain Naour  <romain.naour@gmail.com>

	* Makefile.in (SELFTEST_DEPS): Move before including language makefile
	fragments.

2020-06-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95487
	* tree-vect-stmts.c (vectorizable_store): Use a truth type
	for the scatter mask.

2020-06-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95495
	* tree-vect-slp.c (vect_slp_analyze_node_operations): Use
	SLP_TREE_REPRESENTATIVE in the shift assertion.

2020-06-03  Tom Tromey  <tromey@adacore.com>

	* spellcheck.c (CASE_COST): New define.
	(BASE_COST): New define.
	(get_edit_distance): Recognize case changes.
	(get_edit_distance_cutoff): Update.
	(test_edit_distances): Update.
	(get_old_cutoff): Update.
	(test_find_closest_string): Add case sensitivity test.

2020-06-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_vectorization_profitable_p): Loop over
	the cost vector to unset the visited flag on stmts.

2020-06-03  Tobias Burnus  <tobias@codesourcery.com>

	* gimplify.c (omp_notice_variable): Use new hook.
	* langhooks-def.h (lhd_omp_predetermined_mapping): Declare.
	(LANG_HOOKS_OMP_PREDETERMINED_MAPPING): Define
	(LANG_HOOKS_DECLS): Add it.
	* langhooks.c (lhd_omp_predetermined_sharing): Remove bogus unused attr.
	(lhd_omp_predetermined_mapping): New.
	* langhooks.h (struct lang_hooks_for_decls): Add new hook.

2020-06-03  Jan Hubicka  <jh@suse.cz>

	* lto-streamer.h (LTO_tags): Reorder so frequent tags has small indexes;
	add LTO_first_tree_tag and LTO_first_gimple_tag.
	(lto_tag_is_tree_code_p): Update.
	(lto_tag_is_gimple_code_p): Update.
	(lto_gimple_code_to_tag): Update.
	(lto_tag_to_gimple_code): Update.
	(lto_tree_code_to_tag): Update.
	(lto_tag_to_tree_code): Update.

2020-06-02  Felix Yang  <felix.yang@huawei.com>

	PR target/95459
	* config/aarch64/aarch64.c (aarch64_short_vector_p):
	Leave later code to report an error if SVE is disabled.

2020-06-02  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (zeus): Define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (AArch64 Options): Document zeus -mcpu option.

2020-06-02  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/95347
	* config/rs6000/rs6000.c (prefixed_store_p): Add special case
	for stfs.
	(is_stfs_insn): New helper function.

2020-06-02  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-in.c (stream_read_tree_ref): Simplify streaming of
	references.
	* lto-streamer-out.c (stream_write_tree_ref): Likewise.

2020-06-02  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-hsa.h (CC1_SPEC): Delete.
	* config/gcn/gcn.opt (-mlocal-symbol-id): Delete.
	* config/gcn/mkoffload.c (main): Don't use -mlocal-symbol-id.

2020-06-02  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/95395
	* optabs.c (expand_unop): Fix bits/bytes confusion in latest change.
	* tree-pretty-print.c (dump_generic_node) <ARRAY_TYPE>: Print quals.

2020-06-02  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* config/s390/s390.c (print_operand): Emit vector alignment
	hints for z13.

2020-06-02  Martin Liska  <mliska@suse.cz>

	* coverage.c (get_coverage_counts): Skip sanity check for TOP N counters
	as they have variable number of counters.
	* gcov-dump.c (main): Add new option -r.
	(print_usage): Likewise.
	(tag_counters): All new raw format.
	* gcov-io.h (struct gcov_kvp): New.
	(GCOV_TOPN_VALUES): Remove.
	(GCOV_TOPN_VALUES_COUNTERS): Likewise.
	(GCOV_TOPN_MEM_COUNTERS): New.
	(GCOV_TOPN_DISK_COUNTERS): Likewise.
	(GCOV_TOPN_MAXIMUM_TRACKED_VALUES): Likewise.
	* ipa-profile.c (ipa_profile_generate_summary): Use
	GCOV_TOPN_MAXIMUM_TRACKED_VALUES.
	(ipa_profile_write_edge_summary): Likewise.
	(ipa_profile_read_edge_summary): Likewise.
	(ipa_profile): Remove usage of GCOV_TOPN_VALUES.
	* profile.c (sort_hist_values): Sort variable number
	of counters.
	(compute_value_histograms): Special case for TOP N counters
	that have dynamic number of key-value pairs.
	* value-prof.c (dump_histogram_value): Dump variable number
	of key-value pairs.
	(stream_in_histogram_value): Stream in variable number
	of key-value pairs for TOP N counter.
	(get_nth_most_common_value): Deal with variable number
	of key-value pairs.
	(dump_ic_profile): Use GCOV_TOPN_MAXIMUM_TRACKED_VALUES
	for loop iteration.
	(gimple_find_values_to_profile): Set GCOV_TOPN_MEM_COUNTERS
	to n_counters.
	* doc/gcov-dump.texi: Document new -r option.

2020-06-02  Iain Buclaw  <ibuclaw@gdcproject.org>

	PR target/95420
	* config.gcc (arm-wrs-vxworks7*): Set default cpu to generic-armv7-a.

2020-06-01  Jeff Law  <law@torsion.usersys.redhat.com>

	* lower-subreg.c (resolve_simple_move): If simplify_gen_subreg_concatn
	returns (const_int 0) for the destination, then emit nothing.

2020-06-01  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer.h (enum LTO_tags): Remove LTO_field_decl_ref,
	LTO_function_decl_ref, LTO_label_decl_ref, LTO_namespace_decl_ref,
	LTO_result_decl_ref, LTO_type_decl_ref, LTO_type_ref,
	LTO_const_decl_ref, LTO_imported_decl_ref,
	LTO_translation_unit_decl_ref, LTO_global_decl_ref and
	LTO_namelist_decl_ref; add LTO_global_stream_ref.
	* lto-streamer-in.c (lto_input_tree_ref): Simplify.
	(lto_input_scc): Update.
	(lto_input_tree_1): Update.
	* lto-streamer-out.c (lto_indexable_tree_ref): Simlify.
	* lto-streamer.c (lto_tag_name): Update.

2020-06-01  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.c (stream_out_bitmap): Use lto_output_var_decl_ref.
	(ipa_reference_read_optimization_summary): Use lto_intput_var_decl_ref.
	* lto-cgraph.c (lto_output_node): Likewise.
	(lto_output_varpool_node): Likewise.
	(output_offload_tables): Likewise.
	(input_node): Likewise.
	(input_varpool_node): Likewise.
	(input_offload_tables): Likewise.
	* lto-streamer-in.c (lto_input_tree_ref): Declare.
	(lto_input_var_decl_ref): Declare.
	(lto_input_fn_decl_ref): Declare.
	* lto-streamer-out.c (lto_indexable_tree_ref): Use only one decl stream.
	(lto_output_var_decl_index): Rename to ..
	(lto_output_var_decl_ref): ... this.
	(lto_output_fn_decl_index): Rename to ...
	(lto_output_fn_decl_ref): ... this.
	* lto-streamer.h (enum lto_decl_stream_e_t): Remove per-type streams.
	(DEFINE_DECL_STREAM_FUNCS): Remove.
	(lto_output_var_decl_index): Remove.
	(lto_output_fn_decl_index): Remove.
	(lto_output_var_decl_ref): Declare.
	(lto_output_fn_decl_ref): Declare.
	(lto_input_var_decl_ref): Declare.
	(lto_input_fn_decl_ref): Declare.

2020-06-01  Feng Xue  <fxue@os.amperecomputing.com>

	* cgraphclones.c (materialize_all_clones): Adjust replace map dump.
	* ipa-param-manipulation.c (ipa_dump_adjusted_parameters): Do not
	dump infomation if there is no adjusted parameter.
	* (ipa_param_adjustments::dump): Adjust prefix spaces for dump string.

2020-06-01  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (gimple-array-bounds.o): New.
	* tree-vrp.c: Move array bounds code...
	* gimple-array-bounds.cc: ...here...
	* gimple-array-bounds.h: ...and here.

2020-06-01  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (OBJS): Add value-range-equiv.o.
	* tree-vrp.c (*value_range_equiv*): Move to...
	* value-range-equiv.cc: ...here.
	* tree-vrp.h (class value_range_equiv): Move to...
	* value-range-equiv.h: ...here.
	* vr-values.h: Include value-range-equiv.h.

2020-06-01  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93429
	* ipa-cp.c (propagate_aggs_across_jump_function): Check aggregate
	lattice for simple pass-through by-ref argument.

2020-05-31  Jeff Law  <law@redhat.com>

	* lra.c (add_auto_inc_notes): Remove function.
	* reload1.c (add_auto_inc_notes): Similarly.  Move into...
	* rtlanal.c (add_auto_inc_notes): New function.
	* rtl.h (add_auto_inc_notes): Add prototype.
	* recog.c (peep2_attempt): Scan and add REG_INC notes to new insns
	as needed.

2020-05-31  Jan Hubicka  <jh@suse.cz>

	* lto-section-out.c (lto_output_decl_index): Remove.
	(lto_output_field_decl_index): Move to lto-streamer-out.c
	(lto_output_fn_decl_index): Move to lto-streamer-out.c
	(lto_output_namespace_decl_index): Remove.
	(lto_output_var_decl_index): Remove.
	(lto_output_type_decl_index): Remove.
	(lto_output_type_ref_index): Remove.
	* lto-streamer-out.c (output_type_ref): Remove.
	(lto_get_index): New function.
	(lto_output_tree_ref): Remove.
	(lto_indexable_tree_ref): New function.
	(lto_output_var_decl_index): Move here from lto-section-out.c; simplify.
	(lto_output_fn_decl_index): Move here from lto-section-out.c; simplify.
	(stream_write_tree_ref): Update.
	(lto_output_tree): Update.
	* lto-streamer.h (lto_output_decl_index): Remove prototype.
	(lto_output_field_decl_index): Remove prototype.
	(lto_output_namespace_decl_index): Remove prototype.
	(lto_output_type_decl_index): Remove prototype.
	(lto_output_type_ref_index): Remove prototype.
	(lto_output_var_decl_index): Move.
	(lto_output_fn_decl_index): Move

2020-05-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/95052
	* expr.c (store_expr): For shortedned_string_cst, ensure temp has
	BLKmode.

2020-05-31  Jeff Law  <law@redhat.com>

	* config/h8300/jumpcall.md (brabs, brabc): Disable patterns.

2020-05-31  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (zero_extendsidi2_shifted): New.

2020-05-30  Jonathan Yong  <10walls@gmail.com>

	* config/i386/mingw32.h (REAL_LIBGCC_SPEC): Insert -lkernel32
	after -lmsvcrt. This is necessary as libmsvcrt.a is not a pure
	import library, but also contains some functions that invoke
	others in KERNEL32.DLL.

2020-05-29  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md (altivec_vmrghw_direct): Prefer VSX form.
	(altivec_vmrglw_direct): Ditto.
	(altivec_vperm_<mode>_direct): Ditto.
	(altivec_vperm_v8hiv16qi): Ditto.
	(*altivec_vperm_<mode>_uns_internal): Ditto.
	(*altivec_vpermr_<mode>_internal): Ditto.
	(vperm_v8hiv4si): Ditto.
	(vperm_v16qiv8hi): Ditto.

2020-05-29  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-in.c (streamer_read_chain): Move here from
	tree-streamer-in.c.
	(stream_read_tree_ref): New.
	(lto_input_tree_1): Simplify.
	* lto-streamer-out.c (stream_write_tree_ref): New.
	(lto_write_tree_1): Simplify.
	(lto_output_tree_1): Simplify.
	(DFS::DFS_write_tree): Simplify.
	(streamer_write_chain): Move here from tree-stremaer-out.c.
	* lto-streamer.h (lto_output_tree_ref): Update prototype.
	(stream_read_tree_ref): Declare
	(stream_write_tree_ref): Declare
	* tree-streamer-in.c (streamer_read_chain): Update to use
	stream_read_tree_ref.
	(lto_input_ts_common_tree_pointers): Likewise.
	(lto_input_ts_vector_tree_pointers): Likewise.
	(lto_input_ts_poly_tree_pointers): Likewise.
	(lto_input_ts_complex_tree_pointers): Likewise.
	(lto_input_ts_decl_minimal_tree_pointers): Likewise.
	(lto_input_ts_decl_common_tree_pointers): Likewise.
	(lto_input_ts_decl_with_vis_tree_pointers): Likewise.
	(lto_input_ts_field_decl_tree_pointers): Likewise.
	(lto_input_ts_function_decl_tree_pointers): Likewise.
	(lto_input_ts_type_common_tree_pointers): Likewise.
	(lto_input_ts_type_non_common_tree_pointers): Likewise.
	(lto_input_ts_list_tree_pointers): Likewise.
	(lto_input_ts_vec_tree_pointers): Likewise.
	(lto_input_ts_exp_tree_pointers): Likewise.
	(lto_input_ts_block_tree_pointers): Likewise.
	(lto_input_ts_binfo_tree_pointers): Likewise.
	(lto_input_ts_constructor_tree_pointers): Likewise.
	(lto_input_ts_omp_clause_tree_pointers): Likewise.
	* tree-streamer-out.c (streamer_write_chain): Update to use
	stream_write_tree_ref.
	(write_ts_common_tree_pointers): Likewise.
	(write_ts_vector_tree_pointers): Likewise.
	(write_ts_poly_tree_pointers): Likewise.
	(write_ts_complex_tree_pointers): Likewise.
	(write_ts_decl_minimal_tree_pointers): Likewise.
	(write_ts_decl_common_tree_pointers): Likewise.
	(write_ts_decl_non_common_tree_pointers): Likewise.
	(write_ts_decl_with_vis_tree_pointers): Likewise.
	(write_ts_field_decl_tree_pointers): Likewise.
	(write_ts_function_decl_tree_pointers): Likewise.
	(write_ts_type_common_tree_pointers): Likewise.
	(write_ts_type_non_common_tree_pointers): Likewise.
	(write_ts_list_tree_pointers): Likewise.
	(write_ts_vec_tree_pointers): Likewise.
	(write_ts_exp_tree_pointers): Likewise.
	(write_ts_block_tree_pointers): Likewise.
	(write_ts_binfo_tree_pointers): Likewise.
	(write_ts_constructor_tree_pointers): Likewise.
	(write_ts_omp_clause_tree_pointers): Likewise.
	(streamer_write_tree_body): Likewise.
	(streamer_write_integer_cst): Likewise.
	* tree-streamer.h (streamer_read_chain):Declare.
	(streamer_write_chain):Declare.
	(streamer_write_tree_body): Update prototype.
	(streamer_write_integer_cst): Update prototype.

2020-05-29  H.J. Lu  <hjl.tools@gmail.com>

	PR bootstrap/95413
	* configure: Regenerated.

2020-05-29  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (add<mode>3_vcc_zext_dup): Add early clobber.
	(add<mode>3_vcc_zext_dup_exec): Likewise.
	(add<mode>3_vcc_zext_dup2): Likewise.
	(add<mode>3_vcc_zext_dup2_exec): Likewise.

2020-05-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95272
	* tree-vectorizer.h (_slp_tree::representative): Add.
	(SLP_TREE_REPRESENTATIVE): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Adjust SLP
	node gathering.
	(vectorizable_live_operation): Use the representative to
	attach the reduction info to.
	* tree-vect-slp.c (_slp_tree::_slp_tree): Initialize
	SLP_TREE_REPRESENTATIVE.
	(vect_create_new_slp_node): Likewise.
	(slp_copy_subtree): Copy it.
	(vect_slp_rearrange_stmts): Re-arrange even COND_EXPR stmts.
	(vect_slp_analyze_node_operations_1): Pass the representative
	to vect_analyze_stmt.
	(vect_schedule_slp_instance): Pass the representative to
	vect_transform_stmt.

2020-05-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95356
	* tree-vect-stmts.c (vectorizable_shift): Do in-place SLP
	node hacking during analysis.

2020-05-29  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/95362
	* lto-streamer-out.c (lto_output_tree): Disable redundant streaming.

2020-05-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95403
	* tree-vect-stmts.c (vect_init_vector_1): Guard against NULL
	stmt_vinfo.

2020-05-29  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/95315
	* omp-general.c (omp_resolve_declare_variant): Fix up addition of
	declare variant cgraph node removal callback.

2020-05-29  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/95052
	* expr.c (store_expr): If expr_size is constant and significantly
	larger than TREE_STRING_LENGTH, set temp to just the
	TREE_STRING_LENGTH portion of the STRING_CST.

2020-05-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95393
	* tree-ssa-phiopt.c (minmax_replacement): Use gimple_build
	to build the min/max expression so we simplify cases like
	MAX(0, s) immediately.

2020-05-29  Joe Ramsay  <joe.ramsay@arm.com>

	* config/aarch64/aarch64-sve.md (<LOGICAL:optab><mode>3): Add support
	for unpacked EOR, ORR, AND.

2020-05-28  Nicolas Bértolo  <nicolasbertolo@gmail.com>

	* Makefile.in: don't look for libiberty in the "pic" subdirectory
	when building for Mingw. Add dependency on xgcc with the proper
	extension.

2020-05-28  Jeff Law  <law@redhat.com>

	* config/h8300/logical.md (bclrhi_msx): Remove pattern.

2020-05-28  Jeff Law  <law@redhat.com>

	* config/h8300/logical.md (HImode H8/SX bit-and splitter): Don't
	make a nonzero adjustment to the memory offset.
	(b<ior,xor>hi_msx): Turn into a splitter.

2020-05-28  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-store-merging.c (merged_store_group::can_be_merged_into):
	Fix off-by-one error.

2020-05-28  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.h (aarch64_frame): Add a comment above
	wb_candidate1 and wb_candidate2.
	* config/aarch64/aarch64.c (aarch64_layout_frame): Invalidate
	wb_candidate1 and wb_candidate2 if we decided not to use them.

2020-05-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR testsuite/95361
	* config/aarch64/aarch64.c (aarch64_expand_epilogue): Assert that
	we have at least some CFI operations when using a frame pointer.
	Only redefine the CFA if we have CFI operations.

2020-05-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_prologue_cost_for_slp): Remove
	case for !SLP_TREE_VECTYPE.
	(vect_slp_analyze_node_operations): Adjust.

2020-05-28  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::vec_defs): Add.
	(SLP_TREE_VEC_DEFS): Likewise.
	* tree-vect-slp.c (_slp_tree::_slp_tree): Adjust.
	(_slp_tree::~_slp_tree): Likewise.
	(vect_mask_constant_operand_p): Remove unused function.
	(vect_get_constant_vectors): Rename to...
	(vect_create_constant_vectors): ... this.  Take the
	invariant node as argument and code generate it.  Remove
	dead code, remove temporary asserts.  Pass a NULL stmt_info
	to vect_init_vector.
	(vect_get_slp_defs): Simplify.
	(vect_schedule_slp_instance): Code-generate externals and
	invariants using vect_create_constant_vectors.

2020-05-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_finish_stmt_generation_1):
	Conditionalize stmt_info use, assert the new stmt cannot throw
	when not specified.
	(vect_finish_stmt_generation): Adjust assert.

2020-05-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95273
	PR tree-optimization/95356
	* tree-vect-stmts.c (vectorizable_shift): Adjust when and to
	what we set the vector type of the shift operand SLP node
	again.

2020-05-28  Andrea Corallo  <andrea.corallo@arm.com>

	* config/arm/arm.c (mve_vector_mem_operand): Fix unwanted
	fall-throughs.

2020-05-28  Martin Liska  <mliska@suse.cz>

	PR web/95380
	* doc/invoke.texi: Add missing params, remove max-once-peeled-insns and
	rename ipcp-unit-growth to ipa-cp-unit-growth.

2020-05-28  Hongtao Liu  <hongtao.liu@intel.com>

	* config/i386/sse.md (*avx512vl_<code>v2div2qi2_store_1): Rename
	from *avx512vl_<code>v2div2qi_store and refine memory size of
	the pattern.
	(*avx512vl_<code>v2div2qi2_mask_store_1): Ditto.
	(*avx512vl_<code><mode>v4qi2_store_1): Ditto.
	(*avx512vl_<code><mode>v4qi2_mask_store_1): Ditto.
	(*avx512vl_<code><mode>v8qi2_store_1): Ditto.
	(*avx512vl_<code><mode>v8qi2_mask_store_1): Ditto.
	(*avx512vl_<code><mode>v4hi2_store_1): Ditto.
	(*avx512vl_<code><mode>v4hi2_mask_store_1): Ditto.
	(*avx512vl_<code>v2div2hi2_store_1): Ditto.
	(*avx512vl_<code>v2div2hi2_mask_store_1): Ditto.
	(*avx512vl_<code>v2div2si2_store_1): Ditto.
	(*avx512vl_<code>v2div2si2_mask_store_1): Ditto.
	(*avx512f_<code>v8div16qi2_store_1): Ditto.
	(*avx512f_<code>v8div16qi2_mask_store_1): Ditto.
	(*avx512vl_<code>v2div2qi2_store_2): New define_insn_and_split.
	(*avx512vl_<code>v2div2qi2_mask_store_2): Ditto.
	(*avx512vl_<code><mode>v4qi2_store_2): Ditto.
	(*avx512vl_<code><mode>v4qi2_mask_store_2): Ditto.
	(*avx512vl_<code><mode>v8qi2_store_2): Ditto.
	(*avx512vl_<code><mode>v8qi2_mask_store_2): Ditto.
	(*avx512vl_<code><mode>v4hi2_store_2): Ditto.
	(*avx512vl_<code><mode>v4hi2_mask_store_2): Ditto.
	(*avx512vl_<code>v2div2hi2_store_2): Ditto.
	(*avx512vl_<code>v2div2hi2_mask_store_2): Ditto.
	(*avx512vl_<code>v2div2si2_store_2): Ditto.
	(*avx512vl_<code>v2div2si2_mask_store_2): Ditto.
	(*avx512f_<code>v8div16qi2_store_2): Ditto.
	(*avx512f_<code>v8div16qi2_mask_store_2): Ditto.
	* config/i386/i386-builtin-types.def: Adjust builtin type.
	* config/i386/i386-expand.c: Ditto.
	* config/i386/i386-builtin.def: Adjust builtin.
	* config/i386/avx512fintrin.h: Ditto.
	* config/i386/avx512vlbwintrin.h: Ditto.
	* config/i386/avx512vlintrin.h: Ditto.

2020-05-28  Dong JianQiang  <dongjianqiang2@huawei.com>

	PR gcov-profile/95332
	* gcov-io.c (gcov_var::endian): Move field.
	(from_file): Add IN_GCOV_TOOL check.
	* gcov-io.h (gcov_magic): Ditto.

2020-05-28  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.c (xtensa_delegitimize_address): New
	function.
	(TARGET_DELEGITIMIZE_ADDRESS): New macro.

2020-05-27  Eric Botcazou  <ebotcazou@adacore.com>

	* builtin-types.def (BT_UINT128): New primitive type.
	(BT_FN_UINT128_UINT128): New function type.
	* builtins.def (BUILT_IN_BSWAP128): New GCC builtin.
	* doc/extend.texi (__builtin_bswap128): Document it.
	* builtins.c (expand_builtin): Deal with BUILT_IN_BSWAP128.
	(is_inexpensive_builtin): Likewise.
	* fold-const-call.c (fold_const_call_ss): Likewise.
	* fold-const.c (tree_call_nonnegative_warnv_p): Likewise.
	* tree-ssa-ccp.c (evaluate_stmt): Likewise.
	* tree-vect-stmts.c (vect_get_data_ptr_increment): Likewise.
	(vectorizable_call): Likewise.
	* optabs.c (expand_unop): Always use the double word path for it.
	* tree-core.h (enum tree_index): Add TI_UINT128_TYPE.
	* tree.h (uint128_type_node): New global type.
	* tree.c (build_common_tree_nodes): Build it if TImode is supported.

2020-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (*mmx_haddv2sf3): Remove SSE alternatives.
	(mmx_hsubv2sf3): Ditto.
	(mmx_haddsubv2sf3): New expander.
	(*mmx_haddsubv2sf3): Rename from mmx_addsubv2sf3. Correct
	RTL template to model horizontal subtraction and addition.
	* config/i386/i386-builtin.def (IX86_BUILTIN_PFPNACC):
	Update for rename.

2020-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95355
	* config/i386/sse.md
	(<mask_codefor>avx512f_<code>v16qiv16si2<mask_name>):
	Remove %q operand modifier from insn template.
	(avx512f_<code>v8hiv8di2<mask_name>): Ditto.

2020-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (mmx_pswapdsf2): Add SSE alternatives.
	Enable insn pattern for TARGET_MMX_WITH_SSE.
	(*mmx_movshdup): New insn pattern.
	(*mmx_movsldup): Ditto.
	(*mmx_movss): Ditto.
	* config/i386/i386-expand.c (ix86_vectorize_vec_perm_const):
	Handle E_V2SFmode.
	(expand_vec_perm_movs): Handle E_V2SFmode.
	(expand_vec_perm_even_odd): Ditto.
	(expand_vec_perm_broadcast_1): Assert that E_V2SFmode
	is already handled by standard shuffle patterns.

2020-05-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95295
	* tree-ssa-loop-im.c (sm_seq_valid_bb): Fix sinking after
	merging stores from paths.

2020-05-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95356
	* tree-vect-stmts.c (vectorizable_shift): Adjust vector
	type for the shift operand.

2020-05-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95335
	* tree-vect-slp.c (vect_slp_analyze_node_operations): Reset
	lvisited for nodes made external.

2020-05-27  Richard Biener  <rguenther@suse.de>

	* dump-context.h (debug_dump_context): New class.
	(dump_context): Make it friend.
	* dumpfile.c (debug_dump_context::debug_dump_context):
	Implement.
	(debug_dump_context::~debug_dump_context): Likewise.
	* tree-vect-slp.c: Include dump-context.h.
	(vect_print_slp_tree): Dump a single SLP node.
	(debug): New overload for slp_tree.
	(vect_print_slp_graph): Rename from vect_print_slp_tree and
	use that.
	(vect_analyze_slp_instance): Adjust.

2020-05-27  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/95315
	* omp-general.c (omp_declare_variant_remove_hook): New function.
	(omp_resolve_declare_variant): Always return base if it is already
	declare_variant_alt magic decl itself.  Register
	omp_declare_variant_remove_hook as cgraph node removal hook.

2020-05-27  Jeff Law  <law@redhat.com>

	* config/h8300/testcompare.md (tst_extzv_1_n): Do not accept constants
	for the primary input operand.
	(tstsi_variable_bit_qi): Similarly.

2020-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (mmx_pswapdv2si2): Add SSE2 alternative.

2020-05-26  Tobias Burnus  <tobias@codesourcery.com>

	PR ipa/95320
	* ipa-utils.h (odr_type_p): Also permit calls with
	only flag_generate_offload set.

2020-05-26  Alexandre Oliva  <oliva@adacore.com>

	* gcc.c (validate_switches): Add braced parameter.  Adjust all
	callers.  Expected and skip trailing brace only if braced.
	Return after handling one atom otherwise.
	(DUMPS_OPTIONS): New.
	(cpp_debug_options): Define in terms of it.

2020-05-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95327
	* tree-vect-stmts.c (vectorizable_shift): Compute op1_vectype
	when we are not using a scalar shift.

2020-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (*mmx_pshufd_1): New insn pattern.
	* config/i386/i386-expand.c (ix86_vectorize_vec_perm_const):
	Handle E_V2SImode and E_V4HImode.
	(expand_vec_perm_even_odd_1): Handle E_V4HImode.
	Assert that E_V2SImode is already handled.
	(expand_vec_perm_broadcast_1): Assert that E_V2SImode
	is already handled by standard shuffle patterns.

2020-05-26  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data_in_type): Simpify types of TYPE_VALUES in
	enumeral types.

2020-05-26  Jakub Jelinek  <jakub@redhat.com>

	PR c++/95197
	* gimplify.c (find_combined_omp_for): Move to omp-general.c.
	* omp-general.h (find_combined_omp_for): Declare.
	* omp-general.c: Include tree-iterator.h.
	(find_combined_omp_for): New function, moved from gimplify.c.

2020-05-26  Alexandre Oliva  <oliva@adacore.com>

	* common.opt (aux_base_name): Define.
	(dumpbase, dumpdir): Mark as Driver options.
	(-dumpbase, -dumpdir): Likewise.
	(dumpbase-ext, -dumpbase-ext): New.
	(auxbase, auxbase-strip): Drop.
	* doc/invoke.texi (-dumpbase, -dumpbase-ext, -dumpdir):
	Document.
	(-o): Introduce the notion of primary output, mention it
	influences auxiliary and dump output names as well, add
	examples.
	(-save-temps): Adjust, move examples into -dump*.
	(-save-temps=cwd, -save-temps=obj): Likewise.
	(-fdump-final-insns): Adjust.
	* dwarf2out.c (gen_producer_string): Drop auxbase and
	auxbase_strip; add dumpbase_ext.
	* gcc.c (enum save_temps): Add SAVE_TEMPS_DUMP.
	(save_temps_prefix, save_temps_length): Drop.
	(save_temps_overrides_dumpdir): New.
	(dumpdir, dumpbase, dumpbase_ext): New.
	(dumpdir_length, dumpdir_trailing_dash_added): New.
	(outbase, outbase_length): New.
	(The Specs Language): Introduce %".  Adjust %b and %B.
	(ASM_FINAL_SPEC): Use %b.dwo for an aux output name always.
	Precede object file with %w when it's the primary output.
	(cpp_debug_options): Do not pass on incoming -dumpdir,
	-dumpbase and -dumpbase-ext options; recompute them with
	%:dumps.
	(cc1_options): Drop auxbase with and without compare-debug;
	use cpp_debug_options instead of dumpbase.  Mark asm output
	with %w when it's the primary output.
	(static_spec_functions): Drop %:compare-debug-auxbase-opt and
	%:replace-exception.  Add %:dumps.
	(driver_handle_option): Implement -save-temps=*/-dumpdir
	mutual overriding logic.  Save dumpdir, dumpbase and
	dumpbase-ext options.  Do not save output_file in
	save_temps_prefix.
	(adds_single_suffix_p): New.
	(single_input_file_index): New.
	(process_command): Combine output dir, output base name, and
	dumpbase into dumpdir and outbase.
	(set_collect_gcc_options): Pass a possibly-adjusted -dumpdir.
	(do_spec_1): Optionally dumpdir instead of save_temps_prefix,
	and outbase instead of input_basename in %b, %B and in
	-save-temps aux files.  Handle empty argument %".
	(driver::maybe_run_linker): Adjust dumpdir and auxbase.
	(compare_debug_dump_opt_spec_function): Adjust gkd dump file
	naming.  Spec-quote the computed -fdump-final-insns file name.
	(debug_auxbase_opt): Drop.
	(compare_debug_self_opt_spec_function): Drop auxbase-strip
	computation.
	(compare_debug_auxbase_opt_spec_function): Drop.
	(not_actual_file_p): New.
	(replace_extension_spec_func): Drop.
	(dumps_spec_func): New.
	(convert_white_space): Split-out parts into...
	(quote_string, whitespace_to_convert_p): ... these.  New.
	(quote_spec_char_p, quote_spec, quote_spec_arg): New.
	(driver::finalize): Release and reset new variables; drop
	removed ones.
	* lto-wrapper.c (HAVE_TARGET_EXECUTABLE_SUFFIX): Define if...
	(TARGET_EXECUTABLE_SUFFIX): ... is defined; define this to the
	empty string otherwise.
	(DUMPBASE_SUFFIX): Drop leading period.
	(debug_objcopy): Use concat.
	(run_gcc): Recognize -save-temps=* as -save-temps too.  Obey
	-dumpdir.  Pass on empty dumpdir and dumpbase with a directory
	component.  Simplify temp file names.
	* opts.c (finish_options): Drop aux base name handling.
	(common_handle_option): Drop auxbase-strip handling.
	* toplev.c (print_switch_values): Drop auxbase, add
	dumpbase-ext.
	(process_options): Derive aux_base_name from dump_base_name
	and dump_base_ext.
	(lang_dependent_init): Compute dump_base_ext along with
	dump_base_name.  Disable stack usage and callgraph-info	during
	lto generation and compare-debug recompilation.

2020-05-26  Hongtao Liu  <hongtao.liu@intel.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95211
	PR target/95256
	* config/i386/sse.md (<floatunssuffix>v2div2sf2): New expander.
	(fix<fixunssuffix>_truncv2sfv2di2): Ditto.
	(avx512dq_float<floatunssuffix>v2div2sf2): Renaming from
	float<floatunssuffix>v2div2sf2.
	(avx512dq_fix<fixunssuffix>_truncv2sfv2di2<mask_name>):
	Renaming from fix<fixunssuffix>_truncv2sfv2di2<mask_name>.
	(vec_pack<floatprefix>_float_<mode>): Adjust icode name.
	(vec_unpack_<fixprefix>fix_trunc_lo_<mode>): Ditto.
	(vec_unpack_<fixprefix>fix_trunc_hi_<mode>): Ditto.
	* config/i386/i386-builtin.def: Ditto.
	* emit-rtl.c (validate_subreg): Allow use of *paradoxical* vector
	subregs when both omode and imode are vector mode and
	have the same inner mode.

2020-05-25  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-store-merging.c (merged_store_group::can_be_merged_into):
	Only turn MEM_REFs into bit-field stores for small bit-field regions.
	(imm_store_chain_info::output_merged_store): Be prepared for sources
	with non-integral type in the bit-field insertion case.
	(pass_store_merging::process_store): Use MAX_BITSIZE_MODE_ANY_INT as
	the largest size for the bit-field case.

2020-05-25  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (*vec_dupv2sf): Redefine as define_insn.
	(mmx_pshufw_1): Change Yv constraint to xYw.  Correct type attribute.
	(*vec_dupv4hi): Redefine as define_insn.
	Remove alternative with general register input.
	(*vec_dupv2si): Ditto.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95309
	* tree-vect-slp.c (vect_get_constant_vectors): Move number
	of vector computation ...
	(vect_slp_analyze_node_operations): ... to analysis phase.

2020-05-25  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (lto_output_tree): Add streamer_debugging check.
	* lto-streamer.h (streamer_debugging): New constant
	* tree-streamer-in.c (streamer_read_tree_bitfields): Add
	streamer_debugging check.
	(streamer_get_pickled_tree): Likewise.
	* tree-streamer-out.c (pack_ts_base_value_fields): Likewise.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95308
	* tree-ssa-forwprop.c (pass_forwprop::execute): Generalize
	test for TARGET_MEM_REFs.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95295
	* tree-ssa-loop-im.c (sm_seq_valid_bb): Compare remat stores
	RHSes and drop to full sm_other if they are not equal.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95271
	* tree-vect-stmts.c (vectorizable_bswap): Update invariant SLP
	children vector type.
	(vectorizable_call): Pass down slp ops.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95297
	* tree-vect-stmts.c (vectorizable_shift): For scalar_shift_arg
	skip updating operand 1 vector type.

2020-05-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95284
	* tree-ssa-sink.c (sink_common_stores_to_bb): Amend previous
	fix.

2020-05-25  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/95125
	* config/i386/sse.md (sf2dfmode_lower): New mode attribute.
	(trunc<mode><sf2dfmode_lower>2) New expander.
	(extend<sf2dfmode_lower><mode>2): Ditto.

2020-05-23 Iain Sandoe <iain@sandoe.co.uk>

	* config/darwin.h (ASM_GENERATE_INTERNAL_LABEL): Make
	ubsan_{data,type},ASAN symbols linker-visible.

2020-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (DFS::DFS): Silence warning.

2020-05-22  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95255
	* config/i386/i386.md (<rounding_insn><mode>2): Do not try to
	expand non-sse4 ROUND_ROUNDEVEN rounding via SSE support routines.

2020-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (lto_output_tree): Do not stream final ref if
	it is not needed.

2020-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-section-out.c (lto_output_decl_index): Adjust dump indentation.
	* lto-streamer-out.c (create_output_block): Fix whitespace
	(lto_write_tree_1): Add (debug) dump.
	(DFS::DFS): Add dump.
	(DFS::DFS_write_tree_body): Do not dump here.
	(lto_output_tree): Improve dumping; do not stream ref when not needed.
	(produce_asm_for_decls): Fix whitespace.
	* tree-streamer-out.c (streamer_write_tree_header): Add dump.
	* tree-streamer-out.c (streamer_write_integer_cst): Add debug dump.

2020-05-22  Hongtao.liu  <hongtao.liu@intel.com>

	PR target/92658
	* config/i386/sse.md (trunc<pmov_src_lower><mode>2): New expander
	(truncv32hiv32qi2): Ditto.
	(trunc<ssedoublemodelower><mode>2): Ditto.
	(trunc<mode><pmov_dst_3>2): Ditto.
	(trunc<mode><pmov_dst_mode_4>2): Ditto.
	(truncv2div2si2): Ditto.
	(truncv8div8qi2): Ditto.
	(avx512f_<code>v8div16qi2): Renaming from *avx512f_<code>v8div16qi2.
	(avx512vl_<code>v2div2si): Renaming from *avx512vl_<code>v2div2si2.
	(avx512vl_<code><mode>v2<ssecakarnum>qi2): Renaming from
	*avx512vl_<code><mode>v<ssescalarnum>qi2.

2020-05-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/95258
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	AVX512VPOPCNTDQ.

2020-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95268
	* tree-ssa-sink.c (sink_common_stores_to_bb): Handle clobbers
	properly.

2020-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* tree-streamer.c (record_common_node): Fix hash value of pre-streamed
	nodes.

2020-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-in.c (lto_read_tree): Do not stream end markers.
	(lto_input_scc): Optimize streaming of entry lengths.
	* lto-streamer-out.c (lto_write_tree): Do not stream end markers
	(DFS::DFS): Optimize stremaing of entry lengths

2020-05-22  Richard Biener  <rguenther@suse.de>

	PR lto/95190
	* doc/invoke.texi (flto): Document behavior of diagnostic
	options.

2020-05-22  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_is_simple_use): New overload.
	(vect_maybe_update_slp_op_vectype): New.
	* tree-vect-stmts.c (vect_is_simple_use): New overload
	accessing operands of SLP vs. non-SLP operation transparently.
	(vect_maybe_update_slp_op_vectype): New function updating
	the possibly shared SLP operands vector type.
	(vectorizable_operation): Be a bit more SLP vs non-SLP agnostic
	using the new vect_is_simple_use overload;  update SLP invariant
	operand nodes vector type.
	(vectorizable_comparison): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_assignment): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Likewise.
	* tree-vect-slp.c (vect_get_constant_vectors): Enforce
	present SLP_TREE_VECTYPE and check it matches previous
	behavior.

2020-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95248
	* tree-ssa-loop-im.c (sm_seq_valid_bb): Remove bogus early out.

2020-05-22  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::_slp_tree): New.
	(_slp_tree::~_slp_tree): Likewise.
	* tree-vect-slp.c (_slp_tree::_slp_tree): Factor out code
	from allocators.
	(_slp_tree::~_slp_tree): Implement.
	(vect_free_slp_tree): Simplify.
	(vect_create_new_slp_node): Likewise.  Add nops parameter.
	(vect_build_slp_tree_2): Adjust.
	(vect_analyze_slp_instance): Likewise.

2020-05-21  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* adjust-alignment.c: Include memmodel.h.

2020-05-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/95260
	* config/i386/cpuid.h: Use hexadecimal in comments.

2020-05-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/95212
	* config/i386/i386-builtins.c (processor_features): Move
	F_AVX512VP2INTERSECT after F_AVX512BF16.
	(isa_names_table): Likewise.

2020-05-21  Martin Liska  <mliska@suse.cz>

	* common/config/aarch64/aarch64-common.c (aarch64_handle_option):
	Handle OPT_moutline_atomics.
	* config/aarch64/aarch64.c: Add outline-atomics to
	aarch64_attributes.
	* doc/extend.texi: Document the newly added target attribute.

2020-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95218

	* config/i386/mmx.md (*mmx_<code>v2sf): Do not mark
	operands 1 and 2 commutative.  Manually swap operands.
	(*mmx_nabsv2sf2): Ditto.

	Partially revert:
	2020-05-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*<code>tf2_1):
	Mark operands 1 and 2 commutative.
	(*nabstf2_1): Ditto.
	* config/i386/sse.md (*<code><mode>2): Mark operands 1 and 2
	commutative.  Do not swap operands.
	(*nabs<mode>2): Ditto.

2020-05-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95229
	* config/i386/sse.md (<code>v8qiv8hi2): Use
	simplify_gen_subreg instead of simplify_subreg.
	(<code>v8qiv8si2): Ditto.
	(<code>v4qiv4si2): Ditto.
	(<code>v4hiv4si2): Ditto.
	(<code>v8qiv8di2): Ditto.
	(<code>v4qiv4di2): Ditto.
	(<code>v2qiv2di2): Ditto.
	(<code>v4hiv4di2): Ditto.
	(<code>v2hiv2di2): Ditto.
	(<code>v2siv2di2): Ditto.

2020-05-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95238
	* config/i386/i386.md (*pushsi2_rex64):
	Use "e" constraint instead of "i".

2020-05-20  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-in.c (lto_input_scc): Add SHARED_SCC parameter.
	(lto_input_tree_1): Strenghten sanity check.
	(lto_input_tree): Update call of lto_input_scc.
	* lto-streamer-out.c: Include ipa-utils.h
	(create_output_block): Initialize local_trees if merigng is going
	to happen.
	(destroy_output_block): Destroy local_trees.
	(DFS): Add max_local_entry.
	(local_tree_p): New function.
	(DFS::DFS): Initialize and maintain it.
	(DFS::DFS_write_tree): Decide on streaming format.
	(lto_output_tree): Stream inline singleton SCCs
	* lto-streamer.h (enum LTO_tags): Add LTO_trees.
	(struct output_block): Add local_trees.
	(lto_input_scc): Update prototype.

2020-05-20  Patrick Palka  <ppalka@redhat.com>

	PR c++/95223
	* hash-table.h (hash_table::find_with_hash): Move up the call to
	hash_table::verify.

2020-05-20  Martin Liska  <mliska@suse.cz>

	* lto-compress.c (lto_compression_zstd): Fill up
	num_compressed_il_bytes.
	(lto_uncompression_zstd): Likewise for num_uncompressed_il_bytes here.

2020-05-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95219
	* tree-vect-loop.c (vectorizable_induction): Reduce
	group_size before computing the number of required IVs.

2020-05-20  Richard Biener  <rguenther@suse.de>

	PR middle-end/95231
	* tree-inline.c (remap_gimple_stmt): Revert adjusting
	COND_EXPR and VEC_COND_EXPR for a -fnon-call-exception boundary.

2020-05-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
	    Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/94959
	* config/arm/arm-protos.h (arm_mode_base_reg_class): Function
	declaration.
	(mve_vector_mem_operand): Likewise.
	* config/arm/arm.c (thumb2_legitimate_address_p): For MVE target check
	the load from memory to a core register is legitimate for give mode.
	(mve_vector_mem_operand): Define function.
	(arm_print_operand): Modify comment.
	(arm_mode_base_reg_class): Define.
	* config/arm/arm.h (MODE_BASE_REG_CLASS): Modify to add check for
	TARGET_HAVE_MVE and expand to arm_mode_base_reg_class on TRUE.
	* config/arm/constraints.md (Ux): Likewise.
	(Ul): Likewise.
	* config/arm/mve.md (mve_mov): Replace constraint Us with Ux and also
	add support for missing Vector Store Register and Vector Load Register.
	Add a new alternative to support load from memory to PC (or label) in
	vector store/load.
	(mve_vstrbq_<supf><mode>): Modify constraint Us to Ux.
	(mve_vldrbq_<supf><mode>): Modify constriant Us to Ux, predicate to
	mve_memory_operand and also modify the MVE instructions to emit.
	(mve_vldrbq_z_<supf><mode>): Modify constraint Us to Ux.
	(mve_vldrhq_fv8hf): Modify constriant Us to Ux, predicate to
	mve_memory_operand and also modify the MVE instructions to emit.
	(mve_vldrhq_<supf><mode>): Modify constriant Us to Ux, predicate to
	mve_memory_operand and also modify the MVE instructions to emit.
	(mve_vldrhq_z_fv8hf): Likewise.
	(mve_vldrhq_z_<supf><mode>): Likewise.
	(mve_vldrwq_fv4sf): Likewise.
	(mve_vldrwq_<supf>v4si): Likewise.
	(mve_vldrwq_z_fv4sf): Likewise.
	(mve_vldrwq_z_<supf>v4si): Likewise.
	(mve_vld1q_f<mode>): Modify constriant Us to Ux.
	(mve_vld1q_<supf><mode>): Likewise.
	(mve_vstrhq_fv8hf): Modify constriant Us to Ux, predicate to
	mve_memory_operand.
	(mve_vstrhq_p_fv8hf): Modify constriant Us to Ux, predicate to
	mve_memory_operand and also modify the MVE instructions to emit.
	(mve_vstrhq_p_<supf><mode>): Likewise.
	(mve_vstrhq_<supf><mode>): Modify constriant Us to Ux, predicate to
	mve_memory_operand.
	(mve_vstrwq_fv4sf): Modify constriant Us to Ux.
	(mve_vstrwq_p_fv4sf): Modify constriant Us to Ux and also modify the MVE
	instructions to emit.
	(mve_vstrwq_p_<supf>v4si): Likewise.
	(mve_vstrwq_<supf>v4si): Likewise.Modify constriant Us to Ux.
	* config/arm/predicates.md (mve_memory_operand): Define.

2020-05-30  Richard Biener  <rguenther@suse.de>

	PR c/95141
	* c-fold.c (c_fully_fold_internal): Enhance guard on
	overflow_warning.

2020-05-20  Kito Cheng  <kito.cheng@sifive.com>

	PR target/90811
	* Makefile.in (OBJS): Add adjust-alignment.o.
	* adjust-alignment.c (pass_data_adjust_alignment): New.
	(pass_adjust_alignment): New.
	(pass_adjust_alignment::execute): New.
	(make_pass_adjust_alignment): New.
	* tree-pass.h (make_pass_adjust_alignment): New.
	* passes.def: Add pass_adjust_alignment.

2020-05-19  Alex Coplan  <alex.coplan@arm.com>

	PR target/94591
	* config/aarch64/aarch64.c (aarch64_evpc_rev_local): Don't match
	identity permutation.

2020-05-19  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/sourcebuild.texi: Document new short_eq_int, ptr_eq_short,
	msp430_small, msp430_large and size24plus DejaGNU effective
	targets.
	Improve grammar in descriptions for size20plus and size32plus effective
	targets.

2020-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.c (bpf_compute_frame_layout): Include space for
	callee saved registers only in xBPF.
	(bpf_expand_prologue): Save callee saved registers only in xBPF.
	(bpf_expand_epilogue): Likewise for restoring.
	* doc/invoke.texi (eBPF Options): Document this is activated by
	-mxbpf.

2020-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/bpf/bpf.opt (mxbpf): New option.
	* doc/invoke.texi (Option Summary): Add -mxbpf.
	(eBPF Options): Document -mxbbpf.

2020-05-19  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/92658
	* config/i386/sse.md (<code>v16qiv16hi2): New expander.
	(<code>v32qiv32hi2): Ditto.
	(<code>v8qiv8hi2): Ditto.
	(<code>v16qiv16si2): Ditto.
	(<code>v8qiv8si2): Ditto.
	(<code>v4qiv4si2): Ditto.
	(<code>v16hiv16si2): Ditto.
	(<code>v8hiv8si2): Ditto.
	(<code>v4hiv4si2): Ditto.
	(<code>v8qiv8di2): Ditto.
	(<code>v4qiv4di2): Ditto.
	(<code>v2qiv2di2): Ditto.
	(<code>v8hiv8di2): Ditto.
	(<code>v4hiv4di2): Ditto.
	(<code>v2hiv2di2): Ditto.
	(<code>v8siv8di2): Ditto.
	(<code>v4siv4di2): Ditto.
	(<code>v2siv2di2): Ditto.

2020-05-19  Kito Cheng  <kito.cheng@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_implied_info_t): New.
	(riscv_implied_info): New.
	(riscv_subset_list): Add handle_implied_ext.
	(riscv_subset_list::to_string): New parameter version_p to
	control output format.
	(riscv_subset_list::handle_implied_ext): New.
	(riscv_subset_list::parse_std_ext): Call handle_implied_ext.
	(riscv_arch_str): New parameter version_p to control output format.
	(riscv_expand_arch): New.
	* config/riscv/riscv-protos.h (riscv_arch_str): New parameter,
	version_p.
	* config/riscv/riscv.h (riscv_expand_arch): New,
	(EXTRA_SPEC_FUNCTIONS): Define.
	(ASM_SPEC): Transform -march= via riscv_expand_arch.

2020-05-19  Kito Cheng  <kito.cheng@sifive.com>

	* riscv-common.c (parse_sv_or_non_std_ext): Rename to
	parse_multiletter_ext.
	(parse_multiletter_ext): Add parsing `h` and `z`, drop `sx`,
	adjust parsing order for 's' and 'x'.

2020-05-19  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::vectype): Add field.
	(SLP_TREE_VECTYPE): New.
	* tree-vect-slp.c (vect_create_new_slp_node): Initialize
	SLP_TREE_VECTYPE.
	(vect_create_new_slp_node): Likewise.
	(vect_prologue_cost_for_slp): Move here from tree-vect-stmts.c
	and simplify.
	(vect_slp_analyze_node_operations): Walk nodes children for
	invariant costing.
	(vect_get_constant_vectors): Use local scope op variable.
	* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Remove here.
	(vect_model_simple_cost): Adjust.
	(vect_model_store_cost): Likewise.
	(vectorizable_store): Likewise.

2020-05-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92815
	* tree-object-size.c (decl_init_size): New function.
	(addr_object_size): Call it.
	* tree.h (last_field): Declare.
	(first_field): Add attribute nonnull.

2020-05-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/94940
	* tree-vrp.c (vrp_prop::check_mem_ref): Remove unreachable code.
	* tree.c (component_ref_size): Correct the handling or array members
	of unions.
	Drop a pointless test.
	Rename a local variable.

2020-05-18  Jason Merrill  <jason@redhat.com>

	* aclocal.m4: Add ax_cxx_compile_stdcxx.m4.
	* configure.ac: Use AX_CXX_COMPILE_STDCXX(11).

2020-05-14  Jason Merrill  <jason@redhat.com>

	* doc/install.texi (Prerequisites): Update boostrap compiler
	requirement to C++11/GCC 4.8.

2020-05-18  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	PR tree-optimization/94952
	* gimple-ssa-store-merging.c (pass_store_merging::process_store):
	Initialize variables bitpos, bitregion_start, and bitregion_end in
	order to silence warnings about use of uninitialized variables.

2020-05-18  Carl Love  <cel@us.ibm.com>

	PR target/94833
	* config/rs6000/vsx.md (define_expand): Fix instruction generation for
	first_match_index_<mode>.
	* testsuite/gcc.target/powerpc/builtins-8-p9-runnable.c (main): Add
	additional test cases with zero vector elements.

2020-05-18  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95169
	* config/i386/i386-expand.c (ix86_expand_int_movcc):
	 Avoid reversing a non-trapping comparison to a trapping one.

2020-05-18  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm.c (output_move_double): Fix codegen when loading into
	a register pair with an odd base register.

2020-05-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_fp_absneg_operator):
	Do not emit FLAGS_REG clobber for TFmode.
	* config/i386/i386.md (*<code>tf2_1): Rewrite as
	define_insn_and_split.  Mark operands 1 and 2 commutative.
	(*nabstf2_1): Ditto.
	(absneg SSE splitter): Use MODEF mode iterator instead of SSEMODEF.
	Do not swap memory operands.  Simplify RTX generation.
	(neg abs SSE splitter): Ditto.
	* config/i386/sse.md (*<code><mode>2): Mark operands 1 and 2
	commutative.  Do not swap operands.  Simplify RTX generation.
	(*nabs<mode>2): Ditto.

2020-05-18  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_slp_bb): Start after labels.
	(vect_get_constant_vectors): Really place init stmt after scalar defs.
	* tree-vect-stmts.c (vect_init_vector_1): Insert before
	region begin.

2020-05-18  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/driver-i386.c (host_detect_local_cpu): Support
	Intel Airmont, Tremont, Comet Lake, Ice Lake and Tiger Lake
	processor families.

2020-05-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/95171
	* tree-inline.c (remap_gimple_stmt): Split out trapping compares
	when inlining into a non-call EH function.

2020-05-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95172
	* tree-ssa-loop-im.c (execute_sm): Get flag whether we
	eventually need the conditional processing.
	(execute_sm_exit): When processing an orderd sequence
	avoid doing any conditional processing.
	(hoist_memory_references): Pass down whether all edges
	have ordered processing for a ref to execute_sm.

2020-05-17 Jeff Law  <law@redhat.com>

	* config/h8300/predicates.md (pc_or_label_operand): New predicate.
	* config/h8300/jumpcall.md (branch_true, branch_false): Consolidate
	into a single pattern using pc_or_label_operand.
	* config/h8300/combiner.md (bit branch patterns): Likewise.
	* config/h8300/peepholes.md (HImode and SImode branches): Likewise.

2020-05-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/95021
	* config/i386/i386-features.c (has_non_address_hard_reg):
	Renamed to ...
	(pseudo_reg_set): This.  Return the SET expression.  Ignore
	pseudo register push.
	(general_scalar_to_vector_candidate_p): Combine single_set and
	has_non_address_hard_reg calls to pseudo_reg_set.
	(timode_scalar_to_vector_candidate_p): Likewise.
	* config/i386/i386.md (*pushv1ti2): New pattern.

2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	Revert:
	2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (operand_less_p): Move to...
	* vr-values.c (operand_less_p): ...here.
	* tree-vrp.h (operand_less_p): Remove.

2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (operand_less_p): Move to...
	* vr-values.c (operand_less_p): ...here.
	* tree-vrp.h (operand_less_p): Remove.

2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class vrp_insert): Remove prototype for
	live_on_edge.

2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class live_names): New.
	(live_on_edge): Move into live_names.
	(build_assert_expr_for): Move into vrp_insert.
	(find_assert_locations_in_bb): Rename from
	find_assert_locations_1.
	(process_assert_insertions_for): Move into vrp_insert.
	(compare_assert_loc): Same.
	(remove_range_assertions): Same.
	(dump_asserts_for): Rename to vrp_insert::dump.
	(debug_asserts_for): Rename to vrp_insert::debug.
	(dump_all_asserts): Rename to vrp_insert::dump.
	(debug_all_asserts): Rename to vrp_insert::debug.

2020-05-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (class vrp_prop): Move check_all_array_refs,
	check_array_ref, check_mem_ref, and search_for_addr_array
	into new class...
	(class array_bounds_checker): ...here.
	(class check_array_bounds_dom_walker): Adjust to use
	array_bounds_checker.
	(check_all_array_refs): Move into array_bounds_checker and rename
	to check.
	(class vrp_folder): Make fold_predicate_in private.

2020-05-15 Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (SFI iterator): New iterator for
	SFmode and SImode.
	* config/h8300/peepholes.md (memory comparison): Use mode
	iterator to consolidate 3 patterns into one.
	(stack allocation and stack store): Handle SFmode.  Handle
	8 byte allocations.

2020-05-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-builtin.def (BU_FUTURE_MISC_2): Also require
	RS6000_BTM_POWERPC64.

2020-05-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (SWI48DWI): New mode iterator.
	(*push<mode>2): Allow XMM registers.
	(*pushdi2_rex64): Ditto.
	(*pushsi2_rex64): Ditto.
	(*pushsi2): Ditto.
	(push XMM reg splitter): New splitter

	(*pushdf) Change "x" operand constraint to "v".
	(*pushsf_rex64): Ditto.
	(*pushsf): Ditto.

2020-05-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92260
	* tree-vect-slp.c (vect_get_constant_vectors): Compute
	the number of vector stmts in a canonical way.

2020-05-15  Martin Liska  <mliska@suse.cz>

	* hsa-gen.c (get_symbol_for_decl): Fix misleading indentation
	warning.

2020-05-15  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (v<expander><mode>3): Fix unsignedp.

2020-05-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95133
	* gimple-ssa-split-paths.c
	(find_block_to_duplicate_for_splitting_paths): Check for
	normal edges.

2020-05-15  Christophe Lyon  <christophe.lyon@linaro.org>

        * config/arm/arm.c (reg_needs_saving_p): Add support for interrupt
        routines.
        (arm_compute_save_reg0_reg12_mask): Use reg_needs_saving_p.

2020-05-15  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/94635
	* gimplify.c (gimplify_scan_omp_clauses): For MAP_TO_PSET with
	OMP_TARGET_EXIT_DATA, use 'release:' unless the associated
	item is 'delete:'.

2020-05-15  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/i386.md (isa): Add sse3_noavx.
	(enabled): Handle sse3_noavx.

	* config/i386/mmx.md (mmx_haddv2sf3): New expander.
	(*mmx_haddv2sf3): Rename from mmx_haddv2sf3.  Add SSE/AVX
	alternatives.  Match commutative vec_select selector operands.
	(*mmx_haddv2sf3_low): New insn pattern.

	(*mmx_hsubv2sf3): Add SSE/AVX alternatives.
	(*mmx_hsubv2sf3_low): New insn pattern.

2020-05-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/33315
	* tree-ssa-sink.c: Include tree-eh.h.
	(sink_stats): Add commoned member.
	(sink_common_stores_to_bb): New function implementing store
	commoning by sinking to the successor.
	(sink_code_in_bb): Call it, pass down TODO_cleanup_cfg returned.
	(pass_sink_code::execute): Likewise.  Record commoned stores
	in statistics.

2020-05-14  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR rtl-optimization/37451, part of PR target/61837
	* loop-doloop.c (doloop_simplify_count): New function.  Simplify
	(add -1; zero_ext; add +1) to zero_ext when not wrapping.
	(doloop_modify): Call doloop_simplify_count.

2020-05-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR jit/94778
	* doc/sourcebuild.texi: Document effective target lgccjit.

2020-05-14  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (add<mode>3_zext_dup): Change to a
	define_expand, and rename the original to ...
	(add<mode>3_vcc_zext_dup): ... this, and add a custom VCC operand.
	(add<mode>3_zext_dup_exec): Likewise, with ...
	(add<mode>3_vcc_zext_dup_exec): ... this.
	(add<mode>3_zext_dup2): Likewise, with ...
	(add<mode>3_zext_dup_exec): ... this.
	(add<mode>3_zext_dup2_exec): Likewise, with ...
	(add<mode>3_zext_dup2): ... this.
	* config/gcn/gcn.c (gcn_expand_scalar_to_vector_address): Switch
	addv64di3_zext* calls to use addv64di3_vcc_zext*.

2020-05-14  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/sse.md (truncv2dfv2df2): New insn pattern.
	(extendv2sfv2df2): Ditto.

2020-05-14  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2020-05-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.c (reg_needs_saving_p): New function.
	(use_return_insn): Use reg_needs_saving_p.
	(arm_get_vfp_saved_size): Likewise.
	(arm_compute_frame_layout): Likewise.
	(arm_save_coproc_regs): Likewise.
	(thumb1_expand_epilogue): Likewise.
	(arm_expand_epilogue_apcs_frame): Likewise.
	(arm_expand_epilogue): Likewise.

2020-05-14  Christophe Lyon  <christophe.lyon@linaro.org>

        * config/arm/arm.c (thumb1_expand_prologue): Update error message.

2020-05-14  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/sse.md (sse2_cvtpi2pd): Add memory to alternative 1.

	(floatv2siv2df2): New expander.
	(floatunsv2siv2df2): New insn pattern.

	(fix_truncv2dfv2si2): New expander.
	(fixuns_truncv2dfv2si2): New insn pattern.

2020-05-14  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/95105
	* config/aarch64/aarch64-sve-builtins.cc
	(handle_arm_sve_vector_bits_attribute): Create a copy of the
	original type's TYPE_MAIN_VARIANT, then reapply all the differences
	between the original type and its main variant.

2020-05-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/95118
	* real.c (real_to_decimal_for_mode): Make sure we handle
	a zero with nonzero exponent.

2020-05-14  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (GTFILES): Add omp-general.c.
	* cgraph.h (struct cgraph_node): Add declare_variant_alt and
	calls_declare_variant_alt members and initialize them in the
	ctor.
	* ipa.c (symbol_table::remove_unreachable_nodes): Handle direct
	calls to declare_variant_alt nodes.
	* lto-cgraph.c (lto_output_node): Write declare_variant_alt
	and calls_declare_variant_alt.
	(input_overwrite_node): Read them back.
	* omp-simd-clone.c (simd_clone_create): Copy calls_declare_variant_alt
	bit.
	* tree-inline.c (expand_call_inline): Or in calls_declare_variant_alt
	bit.
	(tree_function_versioning): Copy calls_declare_variant_alt bit.
	* omp-offload.c (execute_omp_device_lower): Call
	omp_resolve_declare_variant on direct function calls.
	(pass_omp_device_lower::gate): Also enable for
	calls_declare_variant_alt functions.
	* omp-general.c (omp_maybe_offloaded): Return false after inlining.
	(omp_context_selector_matches): Handle the case when
	cfun->curr_properties has PROP_gimple_any bit set.
	(struct omp_declare_variant_entry): New type.
	(struct omp_declare_variant_base_entry): New type.
	(struct omp_declare_variant_hasher): New type.
	(omp_declare_variant_hasher::hash, omp_declare_variant_hasher::equal):
	New methods.
	(omp_declare_variants): New variable.
	(struct omp_declare_variant_alt_hasher): New type.
	(omp_declare_variant_alt_hasher::hash,
	omp_declare_variant_alt_hasher::equal): New methods.
	(omp_declare_variant_alt): New variables.
	(omp_resolve_late_declare_variant): New function.
	(omp_resolve_declare_variant): Call omp_resolve_late_declare_variant
	when called late.  Create a magic declare_variant_alt fndecl and
	cgraph node and return that if decision needs to be deferred until
	after gimplification.
	* cgraph.c (symbol_table::create_edge): Or in calls_declare_variant_alt
	bit.

	PR middle-end/95108
	* omp-simd-clone.c (struct modify_stmt_info): Add after_stmt member.
	(ipa_simd_modify_stmt_ops): For PHIs, only add before first stmt in
	entry block if info->after_stmt is NULL, otherwise add after that stmt
	and update it after adding each stmt.
	(ipa_simd_modify_function_body): Initialize info.after_stmt.

	* function.h (struct function): Add has_omp_target bit.
	* omp-offload.c (omp_discover_declare_target_fn_r): New function,
	old renamed to ...
	(omp_discover_declare_target_tgt_fn_r): ... this.
	(omp_discover_declare_target_var_r): Call
	omp_discover_declare_target_tgt_fn_r instead of
	omp_discover_declare_target_fn_r.
	(omp_discover_implicit_declare_target): Also queue functions with
	has_omp_target bit set, for those walk with
	omp_discover_declare_target_fn_r, for declare target to functions
	walk with omp_discover_declare_target_tgt_fn_r.

2020-05-14  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (mmx_fix_truncv2sfv2si2): Rename from mmx_pf2id.
	Add SSE/AVX alternative.  Change operand predicates from
	nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.
	(fix_truncv2sfv2si2): New expander.
	(fixuns_truncv2sfv2si2): New insn pattern.

	(mmx_floatv2siv2sf2): rename from mmx_floatv2si2.
	Add SSE/AVX alternative.  Change operand predicates from
	nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.
	(floatv2siv2sf2): New expander.
	(floatunsv2siv2sf2): New insn pattern.

	* config/i386/i386-builtin.def (IX86_BUILTIN_PF2ID):
	Update for rename.
	(IX86_BUILTIN_PI2FD): Ditto.

2020-05-14  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_emit_stack_probe): Call the probe_stack
	expander.
	* config/s390/s390.md ("@probe_stack2<mode>", "probe_stack"): New
	expanders.

2020-05-14  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (allocate_stack_space): Add missing updates
	of last_probe_offset.

2020-05-14  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("allocate_stack"): Call
	anti_adjust_stack_and_probe_stack_clash when stack clash
	protection is enabled.
	* explow.c (anti_adjust_stack_and_probe_stack_clash): Remove
	prototype. Remove static.
	* explow.h (anti_adjust_stack_and_probe_stack_clash): Add
	prototype.

2020-05-13  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/altivec.h (vec_extractl): New #define.
	(vec_extracth): Likewise.
	* config/rs6000/altivec.md (UNSPEC_EXTRACTL): New constant.
	(UNSPEC_EXTRACTR): Likewise.
	(vextractl<mode>): New expansion.
	(vextractl<mode>_internal): New insn.
	(vextractr<mode>): New expansion.
	(vextractr<mode>_internal): New insn.
	* config/rs6000/rs6000-builtin.def (__builtin_altivec_vextdubvlx):
	New built-in function.
	(__builtin_altivec_vextduhvlx): Likewise.
	(__builtin_altivec_vextduwvlx): Likewise.
	(__builtin_altivec_vextddvlx): Likewise.
	(__builtin_altivec_vextdubvhx): Likewise.
	(__builtin_altivec_vextduhvhx): Likewise.
	(__builtin_altivec_vextduwvhx): Likewise.
	(__builtin_altivec_vextddvhx): Likewise.
	(__builtin_vec_extractl): New overloaded built-in function.
	(__builtin_vec_extracth): Likewise.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins):
	Define overloaded forms of __builtin_vec_extractl and
	__builtin_vec_extracth.
	(builtin_function_type): Add cases to mark arguments of new
	built-in functions as unsigned.
	(rs6000_common_init_builtins): Add
	opaque_ftype_opaque_opaque_opaque_opaque.
	* config/rs6000/rs6000.md (du_or_d): New mode attribute.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Add description of vec_extractl and
	vec_extractr built-in functions.

2020-05-13  Richard Biener  <rguenther@suse.de>

	* target.def (add_stmt_cost): Add new vectype parameter.
	* targhooks.c (default_add_stmt_cost): Adjust.
	* targhooks.h (default_add_stmt_cost): Likewise.
	* config/aarch64/aarch64.c (aarch64_add_stmt_cost): Take new
	vectype parameter.
	* config/arm/arm.c (arm_add_stmt_cost): Likewise.
	* config/i386/i386.c (ix86_add_stmt_cost): Likewise.
	* config/rs6000/rs6000.c (rs6000_add_stmt_cost): Likewise.

	* tree-vectorizer.h (stmt_info_for_cost::vectype): Add.
	(dump_stmt_cost): Add new vectype parameter.
	(add_stmt_cost): Likewise.
	(record_stmt_cost): Likewise.
	(record_stmt_cost): Add overload with old signature.
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Adjust.
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters): Likewise.
	* tree-vectorizer.c (dump_stmt_cost): Add new vectype parameter.
	* tree-vect-stmts.c (record_stmt_cost): Likewise.
	(vect_prologue_cost_for_slp_op): Remove stmt_vec_info parameter
	and pass down correct vectype and NULL stmt_info.
	(vect_model_simple_cost): Adjust.
	(vect_model_store_cost): Likewise.

2020-05-13  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (SLP_INSTANCE_GROUP_SIZE): Remove.
	(_slp_instance::group_size): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): The group size
	is the number of lanes in the node.
	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Likewise.
	(vect_analyze_slp_instance): Do not set SLP_INSTANCE_GROUP_SIZE,
	verify it matches the instance trees number of lanes.
	(vect_slp_analyze_node_operations_1): Use the numer of lanes
	in the node as group size.
	(vect_bb_vectorization_profitable_p): Use the instance root
	number of lanes for the size of life.
	(vect_schedule_slp_instance): Use the number of lanes as
	group_size.
	* tree-vect-stmts.c (vectorizable_load): Remove SLP instance
	parameter.  Use the number of lanes of the load for the group
	size in the gap adjustment code.
	(vect_analyze_stmt): Adjust.
	(vect_transform_stmt): Likewise.

2020-05-13  Jakub Jelinek  <jakub@redhat.com>

	PR debug/95080
	* cfgrtl.c (purge_dead_edges): Skip over debug and note insns even
	if the last insn is a note.

	PR tree-optimization/95060
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Fold a NEGATE_EXPR
	if it is the single use of the FMA internal builtin.

2020-05-13  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/94969
	* tree-data-dependence.c (constant_access_functions): Rename to...
	(invariant_access_functions): ...this.  Add parameter.  Check for
	invariant access function, rather than constant.
	(build_classic_dist_vector): Call above function.
	* tree-loop-distribution.c (pg_add_dependence_edges): Add comment.

2020-05-13  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/94118
	* doc/extend.texi (x86Operandmodifiers): Document more x86
	operand modifier.
	* gcc/config/i386/i386.c: Add comment for operand modifier N and I.

2020-05-12  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* tree-vrp.c (class vrp_insert): New.
	(insert_range_assertions): Move to class vrp_insert.
	(dump_all_asserts): Same as above.
	(dump_asserts_for): Same as above.
	(live): Same as above.
	(need_assert_for): Same as above.
	(live_on_edge): Same as above.
	(finish_register_edge_assert_for): Same as above.
	(find_switch_asserts): Same as above.
	(find_assert_locations): Same as above.
	(find_assert_locations_1): Same as above.
	(find_conditional_asserts): Same as above.
	(process_assert_insertions): Same as above.
	(register_new_assert_for): Same as above.
	(vrp_prop): New variable fun.
	(vrp_initialize): New parameter.
	(identify_jump_threads): Same as above.
	(execute_vrp): Same as above.


2020-05-12  Keith Packard  <keith.packard@sifive.com>

	* config/riscv/riscv.c (riscv_unique_section): New.
	(TARGET_ASM_UNIQUE_SECTION): New.

2020-05-12  Craig Blackmore  <craig.blackmore@embecosm.com>

	* config.gcc:  Add riscv-shorten-memrefs.o to extra_objs for riscv.
	* config/riscv/riscv-passes.def: New file.
	* config/riscv/riscv-protos.h (make_pass_shorten_memrefs): Declare.
	* config/riscv/riscv-shorten-memrefs.c: New file.
	* config/riscv/riscv.c (tree-pass.h): New include.
	(riscv_compressed_reg_p): New Function
	(riscv_compressed_lw_offset_p): Likewise.
	(riscv_compressed_lw_address_p): Likewise.
	(riscv_shorten_lw_offset): Likewise.
	(riscv_legitimize_address): Attempt to convert base + large_offset
	to compressible new_base + small_offset.
	(riscv_address_cost): Make anticipated compressed load/stores
	cheaper for code size than uncompressed load/stores.
	(riscv_register_priority): Move compressed register check to
	riscv_compressed_reg_p.
	* config/riscv/riscv.h (C_S_BITS): Define.
	(CSW_MAX_OFFSET): Define.
	* config/riscv/riscv.opt (mshorten-memefs): New option.
	* config/riscv/t-riscv (riscv-shorten-memrefs.o): New rule.
	(PASSES_EXTRA): Add riscv-passes.def.
	* doc/invoke.texi: Document -mshorten-memrefs.

	* config/riscv/riscv.c (riscv_new_address_profitable_p): New function.
	(TARGET_NEW_ADDRESS_PROFITABLE_P): Define.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (TARGET_NEW_ADDRESS_PROFITABLE_P):  New hook.
	* sched-deps.c (attempt_change): Use old address if it is cheaper than
	new address.
	* target.def (new_address_profitable_p): New hook.
	* targhooks.c (default_new_address_profitable_p): New function.
	* targhooks.h (default_new_address_profitable_p): Declare.

2020-05-12  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (copysignv2sf3): New expander.
	(xorsignv2sf3): Ditto.
	(signbitv2sf3): Ditto.

2020-05-12  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (fmav2sf4): New insn pattern.
	(fmsv2sf4): Ditto.
	(fnmav2sf4): Ditto.
	(fnmsv2sf4): Ditto.

2020-05-12  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in (CET_HOST_FLAGS): New.
	(COMPILER): Add $(CET_HOST_FLAGS).
	* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
	AC_SUBST(CET_HOST_FLAGS).  Clear CET_HOST_FLAGS if jit isn't
	enabled.
	* aclocal.m4: Regenerated.
	* configure: Likewise.

2020-05-12  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (<code>v2sf2): New insn pattern.
	(*mmx_<code>v2sf2): New insn_and_split pattern.
	(*mmx_nabsv2sf2): Ditto.
	(*mmx_andnotv2sf3): New insn pattern.
	(*mmx_<code>v2sf3): Ditto.
	* config/i386/i386.md (absneg_op): New code attribute.
	* config/i386/i386.c (ix86_build_const_vector): Handle V2SFmode.
	(ix86_build_signbit_mask): Ditto.

2020-05-12  Richard Biener  <rguenther@suse.de>

	* tree-ssa-live.c (remove_unused_locals): Remove dead debug
	bind resets.

2020-05-12  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430-protos.h (msp430_output_aligned_decl_common):
	Update prototype to include "local" argument.
	* config/msp430/msp430.c (msp430_output_aligned_decl_common): Add
	"local" argument.  Handle local common decls.
	* config/msp430/msp430.h (ASM_OUTPUT_ALIGNED_DECL_COMMON): Adjust
	msp430_output_aligned_decl_common call with 0 for "local" argument.
	(ASM_OUTPUT_ALIGNED_DECL_LOCAL): Define.

2020-05-12  Richard Biener  <rguenther@suse.de>

	* cfghooks.c (split_edge): Preserve EDGE_DFS_BACK if set.

2020-05-12  Martin Liska  <mliska@suse.cz>

	PR sanitizer/95033
	PR sanitizer/95051
	* sanopt.c (sanitize_rewrite_addressable_params):
	Clear DECL_NOT_GIMPLE_REG_P for argument.

2020-05-12  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94980
	* tree-vect-generic.c (expand_vector_comparison): Use
	vector_element_bits_tree to get the element size in bits,
	rather than using TYPE_SIZE.
	(expand_vector_condition, vector_element): Likewise.

2020-05-12  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94980
	* tree-vect-generic.c (build_replicated_const): Take the number
	of bits as a parameter, instead of the type of the elements.
	(do_plus_minus): Update accordingly, using vector_element_bits
	to calculate the correct number of bits.
	(do_negate): Likewise.

2020-05-12  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94980
	* tree.h (vector_element_bits, vector_element_bits_tree): Declare.
	* tree.c (vector_element_bits, vector_element_bits_tree): New.
	* match.pd: Use the new functions instead of determining the
	vector element size directly from TYPE_SIZE(_UNIT).
	* tree-vect-data-refs.c (vect_gather_scatter_fn_p): Likewise.
	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-stmts.c (vect_is_simple_cond): Likewise.
	* tree-vect-generic.c (expand_vector_piecewise): Likewise.
	(expand_vector_conversion): Likewise.
	(expand_vector_addition): Likewise for a TYPE_SIZE_UNIT used as
	a divisor.  Convert the dividend to bits to compensate.
	* tree-vect-loop.c (vectorizable_live_operation): Call
	vector_element_bits instead of open-coding it.

2020-05-12  Jakub Jelinek  <jakub@redhat.com>

	* omp-offload.h (omp_discover_implicit_declare_target): Declare.
	* omp-offload.c: Include context.h.
	(omp_declare_target_fn_p, omp_declare_target_var_p,
	omp_discover_declare_target_fn_r, omp_discover_declare_target_var_r,
	omp_discover_implicit_declare_target): New functions.
	* cgraphunit.c (analyze_functions): Call
	omp_discover_implicit_declare_target.

2020-05-12  Richard Biener  <rguenther@suse.de>

	* gimple-fold.c (maybe_canonicalize_mem_ref_addr): Canonicalize
	literal constant &MEM[..] to a constant literal.

2020-05-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95045
	* dbgcnt.def (lim): Add debug-counter.
	* tree-ssa-loop-im.c: Include dbgcnt.h.
	(find_refs_for_sm): Use lim debug counter for store motion
	candidates.
	(do_store_motion): Rename form store_motion.  Commit edge
	insertions...
	(store_motion_loop): ... here.
	(tree_ssa_lim): Adjust.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/altivec.h (vec_clzm): Rename to vec_cntlzm.
	(vec_ctzm): Rename to vec_cnttzm.
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	Change fourth operand for vec_ternarylogic to require
	compatibility with unsigned SImode rather than unsigned QImode.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins):
	Remove overloaded forms of vec_gnb that are no longer needed.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Replace vec_clzm with vec_cntlzm;
	replace vec_ctzm with vec_cntlzm; remove four unwanted forms of
	vec_gnb; move vec_ternarylogic documentation into this section
	and replace const unsigned char with const unsigned int as its
	fourth argument.

2020-05-11  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h (vec_genpcvm): New #define.
	* config/rs6000/rs6000-builtin.def (XXGENPCVM_V16QI): New built-in
	instantiation.
	(XXGENPCVM_V8HI): Likewise.
	(XXGENPCVM_V4SI): Likewise.
	(XXGENPCVM_V2DI): Likewise.
	(XXGENPCVM): New overloaded built-in instantiation.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins): Add
	entries for FUTURE_BUILTIN_VEC_XXGENPCVM.
	(altivec_expand_builtin): Add special handling for
	FUTURE_BUILTIN_VEC_XXGENPCVM.
	(builtin_function_type): Add handling for
	FUTURE_BUILTIN_XXGENPCVM_{V16QI,V8HI,V4SI,V2DI}.
	* config/rs6000/vsx.md (VSX_EXTRACT_I4): New mode iterator.
	(UNSPEC_XXGENPCV): New constant.
	(xxgenpcvm_<mode>_internal): New insn.
	(xxgenpcvm_<mode>): New expansion.
	* doc/extend.texi: Add documentation for vec_genpcvm built-ins.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/altivec.h (vec_strir): New #define.
	(vec_stril): Likewise.
	(vec_strir_p): Likewise.
	(vec_stril_p): Likewise.
	* config/rs6000/altivec.md (UNSPEC_VSTRIR): New constant.
	(UNSPEC_VSTRIL): Likewise.
	(vstrir_<mode>): New expansion.
	(vstrir_code_<mode>): New insn.
	(vstrir_p_<mode>): New expansion.
	(vstrir_p_code_<mode>): New insn.
	(vstril_<mode>): New expansion.
	(vstril_code_<mode>): New insn.
	(vstril_p_<mode>): New expansion.
	(vstril_p_code_<mode>): New insn.
	* config/rs6000/rs6000-builtin.def (__builtin_altivec_vstribr):
	New built-in function.
	(__builtin_altivec_vstrihr): Likewise.
	(__builtin_altivec_vstribl): Likewise.
	(__builtin_altivec_vstrihl): Likewise.
	(__builtin_altivec_vstribr_p): Likewise.
	(__builtin_altivec_vstrihr_p): Likewise.
	(__builtin_altivec_vstribl_p): Likewise.
	(__builtin_altivec_vstrihl_p): Likewise.
	(__builtin_vec_strir): New overloaded built-in function.
	(__builtin_vec_stril): Likewise.
	(__builtin_vec_strir_p): Likewise.
	(__builtin_vec_stril_p): Likewise.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins):
	Define overloaded forms of __builtin_vec_strir,
	__builtin_vec_stril, __builtin_vec_strir_p, and
	__builtin_vec_stril_p.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Add description of vec_stril,
	vec_stril_p, vec_strir, and vec_strir_p built-in functions.

2020-05-11  Kelvin Nilsen  <wschmidt@linux.ibm.com>

	* config/rs6000/altivec.h (vec_ternarylogic): New #define.
	* config/rs6000/altivec.md (UNSPEC_XXEVAL): New constant.
	(xxeval): New insn.
	* config/rs6000/predicates.md (u8bit_cint_operand): New predicate.
	* config/rs6000/rs6000-builtin.def: Add handling of new macro
	RS6000_BUILTIN_4.
	(BU_FUTURE_V_4): New macro. Use it.
	(BU_FUTURE_OVERLOAD_4): Likewise.
	* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Add
	handling for quaternary built-in functions.
	(altivec_resolve_overloaded_builtin): Add special-case handling
	for __builtin_vec_xxeval.
	* config/rs6000/rs6000-call.c: Add handling of new macro
	RS6000_BUILTIN_4 in initialization of rs6000_builtin_info,
	bdesc0_arg, bdesc1_arg, bdesc2_arg, bdesc_3arg,
	bdesc_altivec_preds, bdesc_abs, and bdesc_htm arrays.
	(altivec_overloaded_builtins): Add definitions for
	FUTURE_BUILTIN_VEC_XXEVAL.
	(bdesc_4arg): New array.
	(htm_expand_builtin): Add handling for quaternary built-in
	functions.
	(rs6000_expand_quaternop_builtin): New function.
	(rs6000_expand_builtin): Add handling for quaternary built-in
	functions.
	(rs6000_init_builtins): Initialize builtin_mode_to_type entries
	for unsigned QImode and unsigned HImode.
	(builtin_quaternary_function_type): New function.
	(rs6000_common_init_builtins): Add handling of quaternary
	operations.
	* config/rs6000/rs6000.h (RS6000_BTC_QUATERNARY): New defined
	constant.
	(RS6000_BTC_PREDICATE): Change value of constant.
	(RS6000_BTC_ABS): Likewise.
	(rs6000_builtins): Add support for new macro RS6000_BUILTIN_4.
	* doc/extend.texi (PowerPC AltiVec Built-In Functions Available
	for a Future Architecture): Add description of vec_ternarylogic
	built-in function.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def (__builtin_pdepd): New built-in
	function.
	(__builtin_pextd): Likewise.
	* config/rs6000/rs6000.md (UNSPEC_PDEPD): New constant.
	(UNSPEC_PEXTD): Likewise.
	(pdepd): New insn.
	(pextd): Likewise.
	* doc/extend.texi (Basic PowerPC Built-in Functions Available for
	a Future Architecture): Add descriptions of __builtin_pdepd and
	__builtin_pextd functions.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/altivec.h (vec_clrl): New #define.
	(vec_clrr): Likewise.
	* config/rs6000/altivec.md (UNSPEC_VCLRLB): New constant.
	(UNSPEC_VCLRRB): Likewise.
	(vclrlb): New insn.
	(vclrrb): Likewise.
	* config/rs6000/rs6000-builtin.def (__builtin_altivec_vclrlb): New
	built-in function.
	(__builtin_altivec_vclrrb): Likewise.
	(__builtin_vec_clrl): New overloaded built-in function.
	(__builtin_vec_clrr): Likewise.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins):
	Define overloaded forms of __builtin_vec_clrl and
	__builtin_vec_clrr.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Add descriptions of vec_clrl and
	vec_clrr.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def (__builtin_cntlzdm): New
	built-in function definition.
	(__builtin_cnttzdm): Likewise.
	* config/rs6000/rs6000.md (UNSPEC_CNTLZDM): New constant.
	(UNSPEC_CNTTZDM): Likewise.
	(cntlzdm): New insn.
	(cnttzdm): Likewise.
	* doc/extend.texi (Basic PowerPC Built-in Functions available for
	a Future Architecture): Add descriptions of __builtin_cntlzdm and
	__builtin_cnttzdm functions.

2020-05-11  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (sqrtv2sf2): New insn pattern.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/altivec.h (vec_cfuge): New #define.
	* config/rs6000/altivec.md (UNSPEC_VCFUGED): New constant.
	(vcfuged): New insn.
	* config/rs6000/rs6000-builtin.def (__builtin_altivec_vcfuged):
	New built-in function.
	* config/rs6000/rs6000-call.c (builtin_function_type): Add
	handling for FUTURE_BUILTIN_VCFUGED case.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Add description of vec_cfuge built-in
	function.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def (BU_FUTURE_MISC_0): New
	#define.
	(BU_FUTURE_MISC_1): Likewise.
	(BU_FUTURE_MISC_2): Likewise.
	(BU_FUTURE_MISC_3): Likewise.
	(__builtin_cfuged): New built-in function definition.
	* config/rs6000/rs6000.md (UNSPEC_CFUGED): New constant.
	(cfuged): New insn.
	* doc/extend.texi (Basic PowerPC Built-in Functions Available for
	a Future Architecture): New subsubsection.

2020-05-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/95049
	* tree-ssa-sccvn.c (set_ssa_val_to): Reject lattice transition
	between different constants.

2020-05-11  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-pretty-print.c (dump_generic_node): Handle BOOLEAN_TYPEs.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>
	    Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/altivec.h (vec_gnb): New #define.
	* config/rs6000/altivec.md (UNSPEC_VGNB): New constant.
	(vgnb): New insn.
	* config/rs6000/rs6000-builtin.def (BU_FUTURE_OVERLOAD_1): New
	#define.
	(BU_FUTURE_OVERLOAD_2): Likewise.
	(BU_FUTURE_OVERLOAD_3): Likewise.
	(__builtin_altivec_gnb): New built-in function.
	(__buiiltin_vec_gnb): New overloaded built-in function.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins):
	Define overloaded forms of __builtin_vec_gnb.
	(rs6000_expand_binop_builtin): Add error checking for 2nd argument
	of __builtin_vec_gnb.
	(builtin_function_type): Mark return value and arguments unsigned
	for FUTURE_BUILTIN_VGNB.
	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available
	for a Future Architecture): Add description of vec_gnb built-in
	function.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>
	    Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/altivec.h (vec_pdep): New macro implementing new
	built-in function.
	(vec_pext): Likewise.
	* config/rs6000/altivec.md (UNSPEC_VPDEPD): New constant.
	(UNSPEC_VPEXTD): Likewise.
	(vpdepd): New insn.
	(vpextd): Likewise.
	* config/rs6000/rs6000-builtin.def (__builtin_altivec_vpdepd): New
	built-in function.
	(__builtin_altivec_vpextd): Likewise.
	* config/rs6000/rs6000-call.c (builtin_function_type): Add
	handling for FUTURE_BUILTIN_VPDEPD and FUTURE_BUILTIN_VPEXTD
	cases.
	* doc/extend.texi (PowerPC Altivec Built-in Functions Available
	for a Future Architecture): Add description of vec_pdep and
	vec_pext built-in functions.

2020-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>
	    Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/altivec.h (vec_clzm): New macro.
	(vec_ctzm): Likewise.
	* config/rs6000/altivec.md (UNSPEC_VCLZDM): New constant.
	(UNSPEC_VCTZDM): Likewise.
	(vclzdm): New insn.
	(vctzdm): Likewise.
	* config/rs6000/rs6000-builtin.def (BU_FUTURE_V_0): New macro.
	(BU_FUTURE_V_1): Likewise.
	(BU_FUTURE_V_2): Likewise.
	(BU_FUTURE_V_3): Likewise.
	(__builtin_altivec_vclzdm): New builtin definition.
	(__builtin_altivec_vctzdm): Likewise.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Cause
	_ARCH_PWR_FUTURE macro to be defined if OPTION_MASK_FUTURE flag is
	set.
	* config/rs6000/rs6000-call.c (builtin_function_type): Set return
	value and parameter types to be unsigned for VCLZDM and VCTZDM.
	* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add
	support for TARGET_FUTURE flag.
	* config/rs6000/rs6000.h (RS6000_BTM_FUTURE): New macro constant.
	* doc/extend.texi (PowerPC Altivec Built-in Functions Available
	for a Future Architecture): New subsubsection.

2020-05-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94988
	PR tree-optimization/95025
	* tree-ssa-loop-im.c (seq_entry): Make a struct, add from.
	(sm_seq_push_down): Take extra parameter denoting where we
	moved the ref to.
	(execute_sm_exit): Re-issue sm_other stores in the correct
	order.
	(sm_seq_valid_bb): When always executed, allow sm_other to
	prevail inbetween sm_ord and record their stored value.
	(hoist_memory_references): Adjust refs_not_supported propagation
	and prune sm_other from the end of the ordered sequences.

2020-05-11  Felix Yang  <felix.yang@huawei.com>

	PR target/94991
	* config/aarch64/aarch64.md (mov<mode>):
	Bitcasts to the equivalent integer mode using gen_lowpart
	instead of doing FAIL for scalar floating point move.

2020-05-11  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64.c (aarch64_if_then_else_costs): Add case
	to correctly calculate cost for new pattern (*csinv3_uxtw_insn3).
	* config/aarch64/aarch64.md (*csinv3_utxw_insn1): New.
	(*csinv3_uxtw_insn2): New.
	(*csinv3_uxtw_insn3): New.
	* config/aarch64/iterators.md (neg_not_cs): New.

2020-05-11  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/mmx.md (mmx_addv2sf3): Use "v" constraint
	instead of "Yv" for AVX alternatives.  Add "prefix" attribute.
	(*mmx_addv2sf3): Ditto.
	(*mmx_subv2sf3): Ditto.
	(*mmx_mulv2sf3): Ditto.
	(*mmx_<code>v2sf3): Ditto.
	(mmx_ieee_<ieee_maxmin>v2sf3): Ditto.

2020-05-11  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/95046
	* config/i386/i386.c (ix86_vector_mode_supported_p):
	Vectorize 3dNOW! vector modes for TARGET_MMX_WITH_SSE.
	* config/i386/mmx.md (*mov<mode>_internal): Do not set
	mode of alternative 13 to V2SF for TARGET_MMX_WITH_SSE.

	(mmx_addv2sf3): Change operand predicates from
	nonimmediate_operand to register_mmxmem_operand.
	(addv2sf3): New expander.
	(*mmx_addv2sf3): Add SSE/AVX alternatives.  Change operand
	predicates from nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.

	(mmx_subv2sf3): Change operand predicate from
	nonimmediate_operand to register_mmxmem_operand.
	(mmx_subrv2sf3): Ditto.
	(subv2sf3): New expander.
	(*mmx_subv2sf3): Add SSE/AVX alternatives.  Change operand
	predicates from nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.

	(mmx_mulv2sf3): Change operand predicates from
	nonimmediate_operand to register_mmxmem_operand.
	(mulv2sf3): New expander.
	(*mmx_mulv2sf3): Add SSE/AVX alternatives.  Change operand
	predicates from nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.

	(mmx_<code>v2sf3): Change operand predicates from
	nonimmediate_operand to register_mmxmem_operand.
	(<code>v2sf3): New expander.
	(*mmx_<code>v2sf3): Add SSE/AVX alternatives.  Change operand
	predicates from nonimmediate_operand to register_mmxmem_operand.
	Enable instruction pattern for TARGET_MMX_WITH_SSE.
	(mmx_ieee_<ieee_maxmin>v2sf3): Ditto.

2020-05-11  Martin Liska  <mliska@suse.cz>

	PR c/95040
	* common.opt: Fix typo in option description.

2020-05-11  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/94928
	* gcov-io.h: Add caveat about coverage format parsing and
	possible outdated documentation.

2020-05-11  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR tree-optimization/83403
	* tree-affine.c (expr_to_aff_combination): Replace SSA_NAME with
	determine_value_range, Add fold conversion of MULT_EXPR, fix the
	previous PLUS_EXPR.

2020-05-10  Gerald Pfeifer  <gerald@pfeifer.com>

	* config/i386/i386-c.c (ix86_target_macros): Define _ILP32 and
	__ILP32__ for 32-bit targets.

2020-05-09  Eric Botcazou  <ebotcazou@adacore.com>

	* tree.h (expr_align): Delete.
	* tree.c (expr_align): Likewise.

2020-05-09  Hans-Peter Nilsson  <hp@axis.com>

	* resource.c (init_resource_info): Filter-out TARGET_FLAGS_REGNUM
	from end_of_function_needs.

	* config.gcc: Remove support for crisv32-*-* and cris-*-linux*.
	* config/cris/t-linux, config/cris/linux.h, config/cris/linux.opt:
	Remove.
	* config/cris/t-elfmulti: Remove crisv32 multilib.
	* config/cris: Remove shared-library and CRIS v32 support.

	Move trivially from cc0 to reg:CC model, removing most optimizations.
	* config/cris/cris.md: Remove all side-effect patterns and their
	splitters.  Remove most peepholes.  Add clobbers of CRIS_CC0_REGNUM
	to all but post-reload control-flow and movem insns.  Remove
	constraints on all modified expanders.  Remove obsoleted cc0-related
	references.
	(attr "cc"): Remove alternative "rev".
	(mode_iterator BWDD, DI_, SI_): New.
	(mode_attr sCC_destc, cmp_op1c, cmp_op2c): New.
	("tst<mode>"): Remove; fold as "M" alternative into compare insn.
	("mstep_shift", "mstep_mul"): Remove patterns.
	("s<rcond>", "s<ocond>", "s<ncond>"): Anonymize.
	* config/cris/cris.c: Change all non-condition-code,
	non-control-flow emitted insns to add a parallel with clobber of
	CRIS_CC0_REGNUM, mostly by changing from gen_rtx_SET with
	emit_insn to use of emit_move_insn, gen_add2_insn or
	cris_emit_insn, as convenient.
	(cris_reg_overlap_mentioned_p)
	(cris_normal_notice_update_cc, cris_notice_update_cc): Remove.
	(cris_movem_load_rest_p): Don't assume all elements in a
	PARALLEL are SETs.
	(cris_store_multiple_op_p): Ditto.
	(cris_emit_insn): New function.
	* cris/cris-protos.h (cris_emit_insn): Declare.

	PR target/93372
	* config/cris/cris.md (zcond): New code_iterator.
	("*cbranch<mode>4_btstq<CC>"): New insn_and_split.

	* config/cris/cris.c (TARGET_FLAGS_REGNUM): Define.

	* config/cris/cris.h (REVERSIBLE_CC_MODE): Define to true.

	* config/cris/cris.md ("movsi"): For memory destination
	post-reload, generate clobberless variant.  Similarly for a
	zero-source post-reload.
	("*mov_tomem<mode>_split"): New split.
	("*mov_tomem<mode>"): New insn.
	("enabled", mov_tomem_enabled): Define and use to exclude "x" ->
	"Q>m" for less-than-SImode.
	("*mov_fromzero<mode>_split"): New split.
	("*mov_fromzero<mode>"): New insn.

	Prepare for cmpelim pass to eliminate redundant compare insns.
	* config/cris/cris-modes.def: New file.
	* config/cris/cris-protos.h (cris_select_cc_mode): Declare.
	(cris_notice_update_cc): Remove left-over declaration.
	* config/cris/cris.c (TARGET_CC_MODES_COMPATIBLE): Define.
	(cris_select_cc_mode, cris_cc_modes_compatible): New functions.
	* config/cris/cris.h (SELECT_CC_MODE): Define.
	* config/cris/cris.md (NZSET, NZUSE, NZVCSET, NZVCUSE): New
	mode_iterators.
	(cond): New code_iterator.
	(nzcond): Replacement for incorrect ncond.  All callers changed.
	(nzvccond): Replacement for ocond.  All callers changed.
	(rnzcond): Replacement for rcond.  All callers changed.
	(xCC): New code_attr.
	(cmp_op1c, cmp_op0c): Renumber from cmp_op1c and cmp_op2c.  All
	users changed.
	("*cmpdi<NZVCSET:mode>"): Rename from "*cmpdi".  Replace
	CCmode with iteration over NZVCSET.
	("*cmp_ext<BW:mode><NZVCSET:mode>"): Similarly; rename from
	"*cmp_ext<mode>".
	("*cmpsi<NZVCSET:mode>"): Similarly, from "*cmpsi".
	("*cmp<BW:mode><NZVCSET:mode>"): Similarly from "*cmp<mode>".
	("*btst<mode>"): Similarly, from "*btst".
	("*cbranch<mode><code>4"): Rename from "*cbranch<mode>4",
	iterating over cond instead of matching the comparison with
	ordered_comparison_operator.
	("*cbranch<mode>4_btstq<CC>"): Correct label operand number.
	("b<zcond:code><mode>"): Rename from "b<ncond:code>", iterating
	over NZUSE.
	("b<nzvccond:code><mode>"): Similarly from "b<ocond:code>", over
	NZVCUSE.  Remove FIXME.
	("*b<nzcond:code>_reversed<mode>"): Similarly from
	"*b<ncond:code>_reversed", over NZUSE.
	("*b<nzvccond:code>_reversed<mode>"): Similarly from
	"*b<ocond:code>_reversed", over NZVCUSE.  Remove FIXME.
	("b<rnzcond:code><mode>"): Similarly from "b<rcond:code>",
	over NZUSE.  Reinstate "b<oCC>" vs. "b<CC>" mnemonic choice,
	depending on CC_NZmode vs. CCmode.  Remove FIXME.
	("*b<rnzcond:code>_reversed<mode>"): Similarly from
	"*b<rcond:code>_reversed", over NZUSE.
	("*cstore<mode><code>4"): Rename from "*cstore<mode>4",
	iterating over cond instead of matching the comparison with
	ordered_comparison_operator.
	("*s<nzcond:code><mode>"): Rename from "*s<ncond:code>",
	iterating over NZUSE.
	("*s<rnzcond:code><mode>"): Similar from "*s<rcond:code>", over
	NZUSE.  Reinstate "b<oCC>" vs. "b<CC>" mnemonic choice,
	depending on CC_NZmode vs. CCmode.
	("*s<nzvccond:code><mode>"): Simlar from "*s<ocond:code>", over
	NZVCUSE.  Remove FIXME.
	("cc"): Comment on new use.
	("cc_enabled"): New attribute.
	("enabled"): Make default fall back to cc_enabled.
	("setnz", "ccnz", "setnzvc", "ccnzvc", "setcc", "cccc"): New
	default_subst_attrs.
	("setnz_subst", "setnzvc_subst", "setcc_subst"): New default_subst.
	("*movsi_internal<setcc><setnz><setnzvc>"): Rename from
	"*movsi_internal".  Correct contents of, and rename attribute
	"cc" to "cc<cccc><ccnz><ccnzvc>".
	("anz", "anzvc", "acc"): New define_subst_attrs.
	("<acc><anz><anzvc>movhi<setcc><setnz><setnzvc>"): Rename from
	"movhi".  Rename "cc" attribute to "cc<cccc><ccnz><ccnzvc>".
	("<acc><anz><anzvc>movqi<setcc><setnz><setnzvc>"): Similar from
	"movqi".  Correct contents of, and rename "cc" attribute to
	"cc<cccc><ccnz><ccnzvc>".
	("*b<zcond:code><mode>"): Rename from "b<zcond:code><mode>".
	("*b<nzvccond:code><mode>"): Rename from "b<nzvccond:code><mode>".
	("*b<rnzcond:code><mode>"): Rename from "*b<rnzcond:code><mode>".
	("<acc><anz><anzvc>extend<mode>si2<setcc><setnz><setnzvc>"):
	Rename from "extend<mode>si2".
	("<acc><anz><anzvc>zero_extend<mode>si2<setcc><setnz><setnzvc>"):
	Similar, from "zero_extend<mode>si2".
	("*adddi3<setnz>"): Rename from "*adddi3".
	("*subdi3<setnz>"): Similarly from "*subdi3".
	("*addsi3<setnz>"): Similarly from "*addsi3".
	("*subsi3<setnz>"): Similarly from "*subsi3".
	("*addhi3<setnz>"): Similarly from "*addhi3" and decorate the
	"cc" attribute to "cc<ccnz>".
	("*addqi3<setnz>"): Similarly from "*addqi3".
	("*sub<mode>3<setnz>"): Similarly from "*sub<mode>3".
	("*expanded_andsi<setcc><setnz><setnzvc>"): Rename from
	"*expanded_andsi".
	("*iorsi3<setcc><setnz><setnzvc>"): Similar from "*iorsi3".
	Decorate "cc" attribute to make "cc<cccc><ccnz><ccnzvc>".
	("*iorhi3<setcc><setnz><setnzvc>"): Similar from "*iorhi3".
	("*iorqi3<setcc><setnz><setnzvc>"): Similar from "*iorqi3".
	("*expanded_andhi<setcc><setnz><setnzvc>"): Similar from
	"*expanded_andhi".  Add quick cc-setting alternative for 0..31.
	("*andqi3<setcc><setnz><setnzvc>"): Similar from "*andqi3".
	("<acc><anz><anzvc>xorsi3<setcc><setnz><setnzvc>"): Rename
	from "xorsi3".
	("<acc><anz><anzvc>one_cmplsi2<setcc><setnz><setnzvc>"): Rename
	from "one_cmplsi2".
	("<acc><anz><anzvc><shlr>si3<setcc><setnz><setnzvc>"): Rename
	from "<shlr>si3".
	("<acc><anz><anzvc>clzsi2<setcc><setnz><setnzvc>"): Rename
	from "clzsi2".
	("<acc><anz><anzvc>bswapsi2<setcc><setnz><setnzvc>"): Rename
	from "bswapsi2".
	("*uminsi3<setcc><setnz><setnzvc>"): Rename from "*uminsi3".

	* config/cris/cris-modes.def (CC_ZnN): New CC_MODE.
	* config/cris/cris.c (cris_rtx_costs): Handle pre-split bit-test
	* config/cris/cris.md (ZnNNZSET, ZnNNZUSE): New mode_iterators.
	(znnCC, rznnCC): New code_attrs.
	("*btst<mode>"): Iterator over ZnNNZSET instead of NZVCSET.  Remove
	obseolete comment.  Add belt-and-suspenders mode-test to condition.
	Add fixme regarding remaining matched-but-not-generated case.
	("*cbranch<mode>4_btstrq1_<CC>"): New insn_and_split.
	("*cbranch<mode>4_btstqb0_<CC>"): Rename from
	"*cbranch<mode>4_btstq<CC>".  Split to CC_NZ instead of CC.
	("*b<zcond:code><mode>"): Iterate over ZnNNZUSE instead of NZUSE.
	Handle output of CC_ZnNmode.
	("*b<nzcond:code>_reversed<mode>"): Ditto.

	* config/cris/cris.c (cris_select_cc_mode): Return CC_NZmode for
	NEG too.  Correct comment.
	* config/cris/cris.md ("<anz>neg<mode>2<setnz>"): Rename from
	"neg<mode>2".

2020-05-08  Vladimir Makarov  <vmakarov@redhat.com>

	* ira-color.c (update_costs_from_allocno): Remove
	conflict_cost_update_p argument.  Propagate costs only along
	threads. Always do conflict cost update.  Add printing debugging
	info.
	(update_costs_from_copies): Add printing debugging info.
	(restore_costs_from_copies): Ditto.
	(assign_hard_reg): Improve debug info.
	(push_only_colorable): Ditto. Call update_costs_from_prefs.
	(color_allocnos): Remove update_costs_from_prefs.

2020-05-08  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vec_info::slp_loads): New.
	(vect_optimize_slp): Declare.
	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts):  Do
	nothing when there are no loads.
	(vect_gather_slp_loads): Gather loads into a vector.
	(vect_supported_load_permutation_p): Remove.
	(vect_analyze_slp_instance): Do not verify permutation
	validity here.
	(vect_analyze_slp): Optimize permutations of reductions
	after all SLP instances have been gathered and gather
	all loads.
	(vect_optimize_slp): New function split out from
	vect_supported_load_permutation_p.  Elide some permutations.
	(vect_slp_analyze_bb_1): Call vect_optimize_slp.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	* tree-vect-stmts.c (vectorizable_load): Check whether
	the load can be permuted.  When generating code assert we can.

2020-05-08  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (rpo_avail): Change type to
	eliminate_dom_walker *.
	(eliminate_with_rpo_vn): Adjust rpo_avail to make vn_valueize
	use the DOM walker availability.
	(vn_reference_fold_indirect): Use get_addr_base_and_unit_offset_1
	with vn_valueize as valueization callback.
	(vn_reference_maybe_forwprop_address): Likewise.
	* tree-dfa.c (get_addr_base_and_unit_offset_1): Also valueize
	array_ref_low_bound.

2020-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94786
	* match.pd (A ^ ((A ^ B) & -(C cmp D)) -> (C cmp D) ? B : A): New
	simplification.

	PR target/94857
	* config/i386/i386.md (peephole2 after *add<mode>3_cc_overflow_1): New
	define_peephole2.

	PR middle-end/94724
	* tree.c (get_narrower): Reuse the op temporary instead of
	shadowing it.

	PR tree-optimization/94783
	* match.pd ((X + (X >> (prec - 1))) ^ (X >> (prec - 1)) to abs (X)):
	New simplification.

	PR tree-optimization/94956
	* match.pd (FFS): Optimize __builtin_ffs* of non-zero argument into
	__builtin_ctz* + 1 if direct IFN_CTZ is supported.

	PR tree-optimization/94913
	* match.pd (A - B + -1 >= A to B >= A): New simplification.
	(A - B > A to A < B): Don't test TYPE_OVERFLOW_WRAPS which is always
	true for TYPE_UNSIGNED integral types.

	PR bootstrap/94961
	PR rtl-optimization/94516
	* rtl.h (remove_reg_equal_equiv_notes): Add a bool argument defaulted
	to false.
	* rtlanal.c (remove_reg_equal_equiv_notes): Add no_rescan argument.
	Call df_notes_rescan if that argument is not true and returning true.
	* combine.c (adjust_for_new_dest): Pass true as second argument to
	remove_reg_equal_equiv_notes.
	* postreload.c (reload_combine_recognize_pattern): Don't call
	df_notes_rescan.

2020-05-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (*setnbc_<un>signed_<GPR:mode>): New
	define_insn.
	(*setnbcr_<un>signed_<GPR:mode>): New define_insn.
	(*neg_eq_<mode>): Avoid for TARGET_FUTURE; add missing && 1.
	(*neg_ne_<mode>): Likewise.

2020-05-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (setbc_<un>signed_<GPR:mode>): New
	define_insn.
	(*setbcr_<un>signed_<GPR:mode>): Likewise.
	(cstore<mode>4): Use setbc[r] if available.
	(<code><GPR:mode><GPR2:mode>2_isel): Avoid for TARGET_FUTURE.
	(eq<mode>3): Use setbc for TARGET_FUTURE.
	(*eq<mode>3): Avoid for TARGET_FUTURE.
	(ne<mode>3): Replace :P with :GPR; use setbc for TARGET_FUTURE;
	else for non-Pmode, use gen_eq and gen_xor.
	(*ne<mode>3): Avoid for TARGET_FUTURE.
	(*eqsi3_ext<mode>): Avoid for TARGET_FUTURE; fix missing && 1.

2020-05-07 Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md: Move expanders and patterns into
	files based on functionality.
	* config/h8300/addsub.md: New file.
	* config/h8300/bitfield.md: New file
	* config/h8300/combiner.md: New file
	* config/h8300/divmod.md: New file
	* config/h8300/extensions.md: New file
	* config/h8300/jumpcall.md: New file
	* config/h8300/logical.md: New file
	* config/h8300/movepush.md: New file
	* config/h8300/multiply.md: New file
	* config/h8300/other.md: New file
	* config/h8300/proepi.md: New file
	* config/h8300/shiftrotate.md: New file
	* config/h8300/testcompare.md: New file

	* config/h8300/h8300.md (adds/subs splitters): Merge into single
	splitter.
	(negation expanders and patterns): Simplify and combine using
	iterators.
	(one_cmpl expanders and patterns): Likewise.
	(tablejump, indirect_jump patterns ): Likewise.
	(shift and rotate expanders and patterns): Likewise.
	(absolute value expander and pattern): Drop expander, rename pattern
	to just "abssf2"
	(peephole2 patterns): Move into...
	* config/h8300/peepholes.md: New file.
	
	* config/h8300/constraints.md (L and N): Simplify now that we're not
	longer supporting the original H8/300 chip.
	* config/h8300/elf.h (LINK_SPEC): Likewise.  Default to H8/300H.
	* config/h8300/h8300.c (shift_alg_qi): Drop H8/300 support.
	(shift_alg_hi, shift_alg_si): Similarly.
	(h8300_option_overrides): Similarly.  Default to H8/300H.  If
	compiling for H8/S, then turn off H8/300H.  Do not update the
	shift_alg tables for H8/300 port.
	(h8300_emit_stack_adjustment): Remove support for H8/300.  Simplify
	where possible.
	(push, split_adds_subs, h8300_rtx_costs): Likewise.
	(h8300_print_operand, compute_mov_length): Likewise.
	(output_plussi, compute_plussi_length): Likewise.
	(compute_plussi_cc, output_logical_op): Likewise.
	(compute_logical_op_length, compute_logical_op_cc): Likewise.
	(get_shift_alg, h8300_shift_needs_scratch): Likewise.
	(output_a_shift, compute_a_shift_length): Likewise.
	(output_a_rotate, compute_a_rotate_length): Likewise.
	(output_simode_bld, h8300_hard_regno_mode_ok): Likewise.
	(h8300_modes_tieable_p, h8300_return_in_memory): Likewise.
	* config/h8300/h8300.h (TARGET_CPU_CPP_BUILTINS): Likewise.
	(attr_cpu, TARGET_H8300): Remove.
	(TARGET_DEFAULT): Update.
	(UNITS_PER_WORD, PARM_BOUNDARY): Simplify where possible.
	(BIGGEST_ALIGNMENT, STACK_BOUNDARY): Likewise.
	(CONSTANT_ADDRESS_P, MOVE_MAX, Pmode): Likewise.
	(SIZE_TYPE, POINTER_SIZE, ASM_WORD_OP): Likewise.
	* config/h8300/h8300.md: Simplify patterns throughout.
	* config/h8300/t-h8300: Update multilib configuration.
	
	* config/h8300/h8300.h (LINK_SPEC): Remove.
	(USER_LABEL_PREFIX): Likewise.

	* config/h8300/h8300.c (h8300_asm_named_section): Remove.
	(h8300_option_override): Remove remnants of COFF support.

2020-05-07  Alan Modra  <amodra@gmail.com>

	* tree-ssa-reassoc.c (optimize_range_tests_to_bit_test): Replace
	set_rtx_cost with set_src_cost.
	* tree-switch-conversion.c (bit_test_cluster::emit): Likewise.

2020-05-07  Kewen Lin  <linkw@gcc.gnu.org>

	* tree-vect-stmts.c (vectorizable_load): Check alignment to avoid
	redundant half vector handlings for no peeling gaps.

2020-05-07  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* tree-ssa-operands.c (operands_scanner): New class.
	(operands_bitmap_obstack): Remove.
	(n_initialized): Remove.
	(build_uses): Move to operands_scanner class.
	(build_vuse): Same as above.
	(build_vdef): Same as above.
	(verify_ssa_operands): Same as above.
	(finalize_ssa_uses): Same as above.
	(cleanup_build_arrays): Same as above.
	(finalize_ssa_stmt_operands): Same as above.
	(start_ssa_stmt_operands): Same as above.
	(append_use): Same as above.
	(append_vdef): Same as above.
	(add_virtual_operand): Same as above.
	(add_stmt_operand): Same as above.
	(get_mem_ref_operands): Same as above.
	(get_tmr_operands): Same as above.
	(maybe_add_call_vops): Same as above.
	(get_asm_stmt_operands): Same as above.
	(get_expr_operands): Same as above.
	(parse_ssa_operands): Same as above.
	(finalize_ssa_defs): Same as above.
	(build_ssa_operands): Same as above, plus create a C-like wrapper.
	(update_stmt_operands): Create an instance of operands_scanner.

2020-05-07  Richard Biener  <rguenther@suse.de>

	PR ipa/94947
	* tree-ssa-structalias.c (refered_from_nonlocal_fn): Use
	DECL_EXTERNAL || TREE_PUBLIC instead of externally_visible.
	(refered_from_nonlocal_var): Likewise.
	(ipa_pta_execute): Likewise.

2020-05-07  Erick Ochoa <erick.ochoa@theobroma-systems.com>

	* gcc/tree-ssa-struct-alias.c: Fix comments

2020-05-07  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Fix 2 optindex entries.

2020-05-07  Richard Biener  <rguenther@suse.de>

	PR middle-end/94703
	* tree-core.h (tree_decl_common::gimple_reg_flag): Rename ...
	(tree_decl_common::not_gimple_reg_flag): ... to this.
	* tree.h (DECL_GIMPLE_REG_P): Rename ...
	(DECL_NOT_GIMPLE_REG_P): ... to this.
	* gimple-expr.c (copy_var_decl): Copy DECL_NOT_GIMPLE_REG_P.
	(create_tmp_reg): Simplify.
	(create_tmp_reg_fn): Likewise.
	(is_gimple_reg): Check DECL_NOT_GIMPLE_REG_P for all regs.
	* gimplify.c (create_tmp_from_val): Simplify.
	(gimplify_bind_expr): Likewise.
	(gimplify_compound_literal_expr): Likewise.
	(gimplify_function_tree): Likewise.
	(prepare_gimple_addressable): Set DECL_NOT_GIMPLE_REG_P.
	* asan.c (create_odr_indicator): Do not clear DECL_GIMPLE_REG_P.
	(asan_add_global): Copy it.
	* cgraphunit.c (cgraph_node::expand_thunk): Force args
	to be GIMPLE regs.
	* function.c (gimplify_parameters): Copy
	DECL_NOT_GIMPLE_REG_P.
	* ipa-param-manipulation.c
	(ipa_param_body_adjustments::common_initialization): Simplify.
	(ipa_param_body_adjustments::reset_debug_stmts): Copy
	DECL_NOT_GIMPLE_REG_P.
	* omp-low.c (lower_omp_for_scan): Do not set DECL_GIMPLE_REG_P.
	* sanopt.c (sanitize_rewrite_addressable_params): Likewise.
	* tree-cfg.c (make_blocks_1): Simplify.
	(verify_address): Do not verify DECL_GIMPLE_REG_P setting.
	* tree-eh.c (lower_eh_constructs_2): Simplify.
	* tree-inline.c (declare_return_variable): Adjust and
	generalize.
	(copy_decl_to_var): Copy DECL_NOT_GIMPLE_REG_P.
	(copy_result_decl_to_var): Likewise.
	* tree-into-ssa.c (pass_build_ssa::execute): Adjust comment.
	* tree-nested.c (create_tmp_var_for): Simplify.
	* tree-parloops.c (separate_decls_in_region_name): Copy
	DECL_NOT_GIMPLE_REG_P.
	* tree-sra.c (create_access_replacement): Adjust and
	generalize partial def support.
	* tree-ssa-forwprop.c (pass_forwprop::execute): Set
	DECL_NOT_GIMPLE_REG_P on decls we introduce partial defs on.
	* tree-ssa.c (maybe_optimize_var): Handle clearing of
	TREE_ADDRESSABLE and setting/clearing DECL_NOT_GIMPLE_REG_P
	independently.
	* lto-streamer-out.c (hash_tree): Hash DECL_NOT_GIMPLE_REG_P.
	* tree-streamer-out.c (pack_ts_decl_common_value_fields): Stream
	DECL_NOT_GIMPLE_REG_P.
	* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Likewise.
	* cfgexpand.c (avoid_type_punning_on_regs): New.
	(discover_nonconstant_array_refs): Call
	avoid_type_punning_on_regs to avoid unsupported mode punning.

2020-05-07  Alex Coplan  <alex.coplan@arm.com>

	* config/arm/arm.c (arm_add_stmt_cost): Fix declaration, remove class
	from definition.

2020-05-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/57359
	* tree-ssa-loop-im.c (im_mem_ref::indep_loop): Remove.
	(in_mem_ref::dep_loop): Repurpose.
	(LOOP_DEP_BIT): Remove.
	(enum dep_kind): New.
	(enum dep_state): Likewise.
	(record_loop_dependence): New function to populate the
	dependence cache.
	(query_loop_dependence): New function to query the dependence
	cache.
	(memory_accesses::refs_in_loop): Rename to ...
	(memory_accesses::refs_loaded_in_loop): ... this and change to
	only record loads.
	(outermost_indep_loop): Adjust.
	(mem_ref_alloc): Likewise.
	(gather_mem_refs_stmt): Likewise.
	(mem_refs_may_alias_p): Add tbaa_p parameter and pass it down.
	(struct sm_aux): New.
	(execute_sm): Split code generation on exits, record state
	into new hash-map.
	(enum sm_kind): New.
	(execute_sm_exit): Exit code generation part.
	(sm_seq_push_down): Helper for sm_seq_valid_bb performing
	dependence checking on stores reached from exits.
	(sm_seq_valid_bb): New function gathering SM stores on exits.
	(hoist_memory_references): Re-implement.
	(refs_independent_p): Add tbaa_p parameter and pass it down.
	(record_dep_loop): Remove.
	(ref_indep_loop_p_1): Fold into ...
	(ref_indep_loop_p): ... this and generalize for three kinds
	of dependence queries.
	(can_sm_ref_p): Adjust according to hoist_memory_references
	changes.
	(store_motion_loop): Don't do anything if the set of SM
	candidates is empty.
	(tree_ssa_lim_initialize): Adjust.
	(tree_ssa_lim_finalize): Likewise.

2020-05-07  Eric Botcazou  <ebotcazou@adacore.com>
            Pierre-Marie de Rodat  <derodat@adacore.com>

	* dwarf2out.c (add_data_member_location_attribute): Take into account
	the variant part offset in the computation of the data bit offset.
	(add_bit_offset_attribute): Remove CTX parameter.  Pass a new context
	in the call to field_byte_offset.
	(gen_field_die): Adjust call to add_bit_offset_attribute and remove
	confusing assertion.
	(analyze_variant_discr): Deal with boolean subtypes.

2020-05-07  Martin Liska  <mliska@suse.cz>

	* lto-wrapper.c: Split arguments of MAKE environment
	variable.

2020-05-07  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.c (alpha_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for the first assignments to
	fenv_var and new_fenv_var.

2020-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/93069
	* config/i386/subst.md (store_mask_constraint, store_mask_predicate):
	Remove.
	(avx512dq_vextract<shuffletype>64x2_1_maskm,
	avx512f_vextract<shuffletype>32x4_1_maskm,
	vec_extract_lo_<mode>_maskm, vec_extract_hi_<mode>_maskm): Remove.
	(<mask_codefor>avx512dq_vextract<shuffletype>64x2_1<mask_name>): Split
	into ...
	(*avx512dq_vextract<shuffletype>64x2_1,
	avx512dq_vextract<shuffletype>64x2_1_mask): ... these new
	define_insns.  Even in the masked variant allow memory output but in
	that case use 0 rather than 0C constraint on the source of masked-out
	elts.
	(<mask_codefor>avx512f_vextract<shuffletype>32x4_1<mask_name>): Split
	into ...
	(*avx512f_vextract<shuffletype>32x4_1,
	avx512f_vextract<shuffletype>32x4_1_mask): ... these new define_insns.
	Even in the masked variant allow memory output but in that case use
	0 rather than 0C constraint on the source of masked-out elts.
	(vec_extract_lo_<mode><mask_name>): Split into ...
	(vec_extract_lo_<mode>, vec_extract_lo_<mode>_mask): ... these new
	define_insns.  Even in the masked variant allow memory output but in
	that case use 0 rather than 0C constraint on the source of masked-out
	elts.
	(vec_extract_hi_<mode><mask_name>): Split into ...
	(vec_extract_hi_<mode>, vec_extract_hi_<mode>_mask): ... these new
	define_insns.  Even in the masked variant allow memory output but in
	that case use 0 rather than 0C constraint on the source of masked-out
	elts.

2020-05-06  qing zhao  <qing.zhao@oracle.com>

	PR c/94230
	* common.opt: Add -flarge-source-files.
	* doc/invoke.texi: Document it.
	* toplev.c (process_options): set line_table->default_range_bits
	to 0 when flag_large_source_files is true.

2020-05-06  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/94913
	* config/i386/predicates.md (add_comparison_operator): New predicate.
	* config/i386/i386.md (compare->add splitter): New splitters.

2020-05-06  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_transform_slp_perm_load): Adjust.
	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences):
	Remove slp_instance parameter, just iterate over all scalar stmts.
	(vect_slp_analyze_instance_dependence): Adjust and likewise.
	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Remove unused BB
	parameter.
	(vect_schedule_slp): Just iterate over all scalar stmts.
	(vect_supported_load_permutation_p): Adjust.
	(vect_transform_slp_perm_load): Remove slp_instance parameter,
	instead use the number of lanes in the node as group size.
	* tree-vect-stmts.c (vect_model_load_cost): Get vectorization
	factor instead of slp_instance as parameter.
	(vectorizable_load): Adjust.

2020-05-06  Andreas Schwab  <schwab@suse.de>

	* config/aarch64/driver-aarch64.c: Include "aarch64-protos.h".
	(aarch64_get_extension_string_for_isa_flags): Don't declare.

2020-05-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/94964
	* cfgloopmanip.c (create_preheader): Require non-complex
	preheader edge for CP_SIMPLE_PREHEADERS.

2020-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94963
	* tree-ssa-loop-im.c (execute_sm_if_changed): Remove
	no-warning marking of the conditional store.
	(execute_sm): Instead mark the uninitialized state
	on loop entry to be not warned about.

2020-05-06  Hongtao Liu  <hongtao.liu@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_TSXLDTRK_SET,
	OPTION_MASK_ISA2_TSXLDTRK_UNSET): New macros.
	* config.gcc: Add tsxldtrkintrin.h to extra_headers.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	TSXLDTRK.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__TSXLDTRK__.
	* config/i386/i386-options.c (ix86_target_string): Add
	-mtsxldtrk.
	(ix86_valid_target_attribute_inner_p): Add attribute tsxldtrk.
	* config/i386/i386.h (TARGET_TSXLDTRK, TARGET_TSXLDTRK_P):
	New.
	* config/i386/i386.md (define_c_enum "unspec"): Add
	UNSPECV_SUSLDTRK, UNSPECV_RESLDTRK.
	(TSXLDTRK): New define_int_iterator.
	("<tsxldtrk>"): New define_insn.
	* config/i386/i386.opt: Add -mtsxldtrk.
	* config/i386/immintrin.h: Include tsxldtrkintrin.h.
	* config/i386/tsxldtrkintrin.h: New.
	* doc/invoke.texi: Document -mtsxldtrk.

2020-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94921
	* match.pd (~(~X - Y) -> X + Y, ~(~X + Y) -> X - Y): New
	simplifications.

2020-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94965
	* tree-vect-stmts.c (vectorizable_load): Fix typo.

2020-05-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* doc/install.texi: Replace Sun with Solaris as appropriate.
	(Tools/packages necessary for building GCC, Perl version between
	5.6.1 and 5.6.24): Remove Solaris 8 reference.
	(Installing GCC: Binaries, Solaris 2 (SPARC, Intel)): Remove
	TGCware reference.
	(Specific, i?86-*-solaris2*): Update version references for
	Solaris 11.3 and later.  Remove gas 2.26 caveat.
	(Specific, *-*-solaris2*): Update version references for
	Solaris 11.3 and later.  Remove boehm-gc reference.
	Document GMP, MPFR caveats on Solaris 11.3.
	(Specific, sparc-sun-solaris2*): Update Solaris 9 references.
	(Specific, sparc64-*-solaris2*): Likewise.
	Document --build requirement.

2020-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/94950
	* config/riscv/riscv-builtins.c (riscv_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for first assignment to old_flags.

	PR rtl-optimization/94873
	* combine.c (combine_instructions): Don't optimize using REG_EQUAL
	note if SET_SRC (set) has side-effects.

2020-05-06  Hongtao Liu  <hongtao.liu@intel.com>
	    Wei Xiao  <wei3.xiao@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_SERIALIZE_SET,
	OPTION_MASK_ISA2_SERIALIZE_UNSET): New macros.
	(ix86_handle_option): Handle -mserialize.
	* config.gcc (serializeintrin.h): New header file.
	* config/i386/cpuid.h (bit_SERIALIZE): New bit.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	-mserialize.
	* config/i386/i386-builtin.def: Add new builtin.
	* config/i386/i386-c.c (__SERIALIZE__): New macro.
	* config/i386/i386-options.c (ix86_target_opts_isa2_opts):
	  Add -mserialize.
	* (ix86_valid_target_attribute_inner_p): Add target attribute
	* for serialize.
	* config/i386/i386.h (TARGET_SERIALIZE, TARGET_SERIALIZE_P):
	  New macros.
	* config/i386/i386.md (UNSPECV_SERIALIZE): New unspec.
	  (serialize): New define_insn.
	* config/i386/i386.opt (mserialize): New option
	* config/i386/immintrin.h: Include serailizeintrin.h.
	* config/i386/serializeintrin.h: New header file.
	* doc/invoke.texi: Add documents for -mserialize.

2020-05-06  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_gimple_assign_unary): Adjust integer
	to/from pointer conversion checking.

2020-05-05  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-builtin.def: Delete changes meant for a
	private branch.
	* config/rs6000/rs6000-c.c: Likewise.
	* config/rs6000/rs6000-call.c: Likewise.
	* config/rs6000/rs6000.c: Likewise.

2020-05-05  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/rtems.h (RTEMS_STARTFILE_SPEC): Define if undefined.
	(RTEMS_ENDFILE_SPEC): Likewise.
	(STARTFILE_SPEC): Update comment.  Add RTEMS_STARTFILE_SPEC.
	(ENDFILE_SPEC): Add RTEMS_ENDFILE_SPEC.
	(LIB_SPECS): Support -nodefaultlibs option.
	* config/or1k/rtems.h (RTEMS_STARTFILE_SPEC): Define.
	(RTEMS_ENDFILE_SPEC): Likewise.
	* config/rs6000/rtems.h (RTEMS_STARTFILE_SPEC): Likewise.
	(RTEMS_ENDFILE_SPEC): Likewise.
	* config/v850/rtems.h (RTEMS_STARTFILE_SPEC): Likewise.
	(RTEMS_ENDFILE_SPEC): Likewise.

2020-05-05  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/pru.c (pru_hard_regno_call_part_clobbered): Remove.
	(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Remove.

2020-05-05  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/pru.h: Mark R3.w0 as caller saved.

2020-05-05  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/pru.c (pru_emit_doloop): Use new gen_doloop_end_internal
	and gen_doloop_begin_internal.
	(pru_reorg_loop): Use gen_pruloop with mode.
	* config/pru/pru.md: Use new @insn syntax.

2020-05-05  Dimitar Dimitrov  <dimitar@dinux.eu>

	* config/pru/pru.c (pru_print_operand): Fix fall through comment.

2020-05-05  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (fixuns_trunc<mode>si2): Use
	"clobber (scratch:M)" instad of "clobber (match_scratch:M N)".
	(addqi3_cconly_overflow): Ditto.
	(umulv<mode>4): Ditto.
	(<s>mul<mode>3_highpart): Ditto.
	(tls_global_dynamic_32): Ditto.
	(tls_local_dynamic_base_32): Ditto.
	(atanxf2): Ditto.
	(asinxf2): Ditto.
	(acosxf2): Ditto.
	(logxf2): Ditto.
	(log10xf2): Ditto.
	(log2xf2): Ditto.
	(*adddi_4): Remove "m" constraint from scratch operand.
	(*add<mode>_4): Ditto.

2020-05-05  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94516
	* postreload.c (reload_cse_simplify): When replacing sp = sp + const
	with sp = reg, add REG_EQUAL note with sp + const.
	* combine-stack-adj.c (try_apply_stack_adjustment): Change return
	type from int to bool.  Add LIVE and OTHER_INSN arguments.  Undo
	postreload sp = sp + const to sp = reg optimization if needed and
	possible.
	(combine_stack_adjustments_for_block): Add LIVE argument.  Handle
	reg = sp insn with sp + const REG_EQUAL note.  Adjust
	try_apply_stack_adjustment caller, call
	df_simulate_initialize_forwards and df_simulate_one_insn_forwards.
	(combine_stack_adjustments): Allocate and free LIVE bitmap,
	adjust combine_stack_adjustments_for_block caller.

2020-05-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/93623
	* tree-cfg.c (stmt_can_terminate_bb_p): Update comment to reflect
	reality.

2020-05-05  Martin Liska  <mliska@suse.cz>

	* opt-functions.awk (opt_args_non_empty): New function.
	* opt-read.awk: Use the function for various option arguments.

2020-05-05  Martin Liska  <mliska@suse.cz>

	PR driver/94330
	* lto-wrapper.c (run_gcc): When using -flto=jobserver,
	report warning when the jobserver is not detected.

2020-05-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/94636
	* gcov.c (main): Print total lines summary at the end.
	(generate_results): Expect file_name always being non-null.
	Print newline after intermediate file is printed in order to align with
	what we do for normal files.

2020-05-05  Martin Liska  <mliska@suse.cz>

	* dumpfile.c (dump_switch_p): Change return type
	and print option suggestion.
	* dumpfile.h: Change return type.
	* opts-global.c (handle_common_deferred_options):
	Move error into dump_switch_p function.

2020-05-05  Martin Liska  <mliska@suse.cz>

	PR c/92472
	* alloc-pool.h: Use const for some arguments.
	* bitmap.h: Likewise.
	* mem-stats.h: Likewise.
	* sese.h (get_entry_bb): Likewise.
	(get_exit_bb): Likewise.

2020-05-05  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (struct vdhs_data): New.
	(vect_detect_hybrid_slp): New walker.
	(vect_detect_hybrid_slp): Rewrite.

2020-05-05  Richard Biener  <rguenther@suse.de>

	PR ipa/94947
	* tree-ssa-structalias.c (ipa_pta_execute): Use
	varpool_node::externally_visible_p ().
	(refered_from_nonlocal_var): Likewise.

2020-05-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc.c (LTO_PLUGIN_SPEC): Define if not already.
	(LINK_PLUGIN_SPEC): Execute LTO_PLUGIN_SPEC.
	* config/vxworks.h (LTO_PLUGIN_SPEC): Define.

2020-05-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gimplify.c (gimplify_init_constructor): Do not put the constructor
	into static memory if it is not complete.

2020-05-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94949
	* tree-ssa-loop-im.c (execute_sm): Check whether we use
	the multithreaded model or always compute the stored value
	before eliding a load.

2020-05-05  Alex Coplan  <alex.coplan@arm.com>

	* config/aarch64/aarch64.md (*one_cmpl_zero_extend): New.

2020-05-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94800
	* match.pd (X + (X << C) to X * (1 + (1 << C)),
	(X << C1) + (X << C2) to X * ((1 << C1) + (1 << C2))): New
	canonicalizations.

	PR target/94942
	* config/i386/mmx.md (*vec_dupv4hi): Use xYw constraints instead of Yv.

	PR tree-optimization/94914
	* match.pd ((((type)A * B) >> prec) != 0 to .MUL_OVERFLOW(A, B) != 0):
	New simplification.

2020-05-05  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*testqi_ext_3): Use
	int_nonimmediate_operand instead of manual mode checks.
	(*x86_mov<SWI48:mode>cc_0_m1_neg_leu<SWI:mode>):
	Use int_nonimmediate_operand predicate.  Rewrite
	define_insn_and_split pattern to a combine pass splitter.

2020-05-05  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac <i[34567]86-*-*>: Add --32 to tls_as_opt on Solaris.
	* configure: Regenerate.

2020-05-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/94460
	* config/i386/sse.md (avx2_ph<plusminus_mnemonic>wv16hi3,
	ssse3_ph<plusminus_mnemonic>wv8hi3, ssse3_ph<plusminus_mnemonic>wv4hi3,
	avx2_ph<plusminus_mnemonic>dv8si3, ssse3_ph<plusminus_mnemonic>dv4si3,
	ssse3_ph<plusminus_mnemonic>dv2si3): Simplify RTL patterns.

2020-05-04  Clement Chigot  <clement.chigot@atos.net>
	    David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000-call.c (rs6000_init_builtins): Override explicit
	for fmodl, frexpl, ldexpl and modfl builtins.

2020-05-04  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/94941
	* internal-fn.c (expand_load_lanes_optab_fn): Emit a move if the
	chosen lhs is different from the gcall lhs.
	(expand_mask_load_optab_fn): Likewise.
	(expand_gather_load_optab_fn): Likewise.

2020-05-04  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/94795
	* config/i386/i386.md (*neg<mode>_ccc): New insn pattern.
	(EQ compare->LTU compare splitter): New splitter.
	(NE compare->NEG splitter): Ditto.

2020-05-04  Marek Polacek  <polacek@redhat.com>

	Revert:
	2020-04-30  Marek Polacek  <polacek@redhat.com>

	PR c++/94775
	* tree.c (check_base_type): Return true only if TYPE_USER_ALIGN match.
	(check_aligned_type): Check if TYPE_USER_ALIGN match.

2020-05-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93891
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Fall back to
	the original reference tree for assessing access alignment.

2020-05-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/39612
	* tree-ssa-loop-im.c (im_mem_ref::loaded): New member.
	(set_ref_loaded_in_loop): New.
	(mark_ref_loaded): Likewise.
	(gather_mem_refs_stmt): Call mark_ref_loaded for loads.
	(execute_sm): Avoid issueing a load when it was not there.
	(execute_sm_if_changed): Avoid issueing warnings for the
	conditional store.

2020-05-04  Martin Jambor  <mjambor@suse.cz>

	PR ipa/93385
	* tree-inline.c (tree_function_versioning): Leave any type conversion
	of replacements to setup_one_parameter and its friend
	force_value_to_type.

2020-05-04  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/94650
	* config/i386/predicates.md (shr_comparison_operator): New predicate.
	* config/i386/i386.md (compare->shr splitter): New splitters.

2020-05-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94718
	* match.pd ((X < 0) != (Y < 0) into (X ^ Y) < 0): New simplification.

	PR tree-optimization/94718
	* match.pd (bitop (convert @0) (convert? @1)): For GIMPLE, if we can,
	replace two nop conversions on bit_{and,ior,xor} argument
	and result with just one conversion on the result or another argument.

	PR tree-optimization/94718
	* fold-const.c (fold_binary_loc): Move (X & C) eqne (Y & C)
	-> (X ^ Y) & C eqne 0 optimization to ...
	* match.pd ((X & C) op (Y & C) into (X ^ Y) & C op 0): ... here.

	* opts.c (get_option_html_page): Instead of hardcoding a list of
	options common between C/C++ and Fortran only use gfortran/
	documentation for warnings that have CL_Fortran set but not
	CL_C or CL_CXX.

2020-05-03  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_int_movcc):
	Use plus_constant instead of gen_rtx_PLUS with GEN_INT.
	(emit_memmov): Ditto.
	(emit_memset): Ditto.
	(ix86_expand_strlensi_unroll_1): Ditto.
	(release_scratch_register_on_entry): Ditto.
	(gen_frame_set): Ditto.
	(ix86_emit_restore_reg_using_pop): Ditto.
	(ix86_emit_outlined_ms2sysv_restore): Ditto.
	(ix86_expand_epilogue): Ditto.
	(ix86_expand_split_stack_prologue): Ditto.
	* config/i386/i386.md (push immediate splitter): Ditto.
	(strmov): Ditto.
	(strset): Ditto.

2020-05-02  Iain Sandoe  <iain@sandoe.co.uk>

	PR translation/93861
	* config/darwin-driver.c (darwin_driver_init): Adjust spelling in
	a warning.

2020-05-02  Jakub Jelinek  <jakub@redhat.com>

	* config/tilegx/tilegx.md
	(insn_stnt<I124MODE:n>_add<I48MODE:bitsuffix>): Use <I124MODE:n>
	rather than just <n>.

2020-05-01  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/93492
	* cfgexpand.c (pass_expand::execute): Set crtl->patch_area_size
	and crtl->patch_area_entry.
	* emit-rtl.h (rtl_data): Add patch_area_size and patch_area_entry.
	* opts.c (common_handle_option): Limit
	function_entry_patch_area_size and function_entry_patch_area_start
	to USHRT_MAX.  Fix a typo in error message.
	* varasm.c (assemble_start_function): Use crtl->patch_area_size
	and crtl->patch_area_entry.
	* doc/invoke.texi: Document the maximum value for
	-fpatchable-function-entry.

2020-05-01  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h: Repair SUBTARGET_INIT_BUILTINS.
	Override SUBTARGET_SHADOW_OFFSET macro.

2020-05-01  Andreas Tobler  <andreast@gcc.gnu.org>

	* config/i386/i386.h: Define a new macro: SUBTARGET_SHADOW_OFFSET.
	* config/i386/i386.c (ix86_asan_shadow_offset): Use this macro.
	* config/i386/darwin.h: Override the SUBTARGET_SHADOW_OFFSET macro.
	* config/i386/freebsd.h: Likewise.
	* config/freebsd.h (LIBASAN_EARLY_SPEC): Define.
	LIBTSAN_EARLY_SPEC): Likewise. (LIBLSAN_EARLY_SPEC): Likewise.

2020-04-30  Alexandre Oliva <oliva@adacore.com>

	* doc/sourcebuild.texi (Effective-Target Keywords): Document
	the newly-introduced fileio effective target.

2020-04-30  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/94740
	* cse.c (cse_process_notes_1): Replace with...
	(cse_process_note_1): ...this new function, acting as a
	simplify_replace_fn_rtx callback to process_note.  Handle only
	REGs and MEMs directly.  Validate the MEM if cse_process_note
	changes its address.
	(cse_process_notes): Replace with...
	(cse_process_note): ...this new function.
	(cse_extended_basic_block): Update accordingly, iterating over
	the register notes and passing individual notes to cse_process_note.

2020-04-30  Carl Love  <cel@us.ibm.com>

	* config/rs6000/emmintrin.h (_mm_movemask_epi8): Fix comment.

2020-04-30  Martin Jambor  <mjambor@suse.cz>

	PR ipa/94856
	* cgraph.c (clone_of_p): Also consider thunks whih had their bodies
	saved by the inliner and thunks which had their call inlined.
	* ipa-inline-transform.c (save_inline_function_body): Fill in
	former_clone_of of new body holders.

2020-04-30  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Set to 11.0.0.

2020-04-30  Jonathan Wakely  <jwakely@redhat.com>

	* pretty-print.c (pp_take_prefix): Fix spelling in comment.

2020-04-30  Marek Polacek  <polacek@redhat.com>

	PR c++/94775
	* tree.c (check_base_type): Return true only if TYPE_USER_ALIGN match.
	(check_aligned_type): Check if TYPE_USER_ALIGN match.

2020-04-30  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.h (TARGET_OUTLINE_ATOMICS): Define.
	* config/aarch64/aarch64.opt (moutline-atomics): Change to Int variable.
	* doc/invoke.texi (moutline-atomics): Document as on by default.

2020-04-30  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94748
	* config/aarch64/aarch64-bti-insert.c (rest_of_insert_bti): Remove
	the check for NOTE_INSN_DELETED_LABEL.

2020-04-30  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac (--with-documentation-root-url,
	--with-changes-root-url): Diagnose URL not ending with /,
	use AC_DEFINE_UNQUOTED instead of AC_SUBST.
	* opts.h (get_changes_url): Remove.
	* opts.c (get_changes_url): Remove.
	* Makefile.in (CFLAGS-opts.o): Don't add -DDOCUMENTATION_ROOT_URL
	or -DCHANGES_ROOT_URL.
	* doc/install.texi (--with-documentation-root-url,
	--with-changes-root-url): Document.
	* config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Don't call
	get_changes_url and free, change url variable type to const char * and
	set it to CHANGES_ROOT_URL "gcc-10/changes.html#empty_base".
	* config/s390/s390.c (s390_function_arg_vector,
	s390_function_arg_float): Likewise.
	* config/aarch64/aarch64.c (aarch64_vfp_is_call_or_return_candidate):
	Likewise.
	* config/rs6000/rs6000-call.c (rs6000_discover_homogeneous_aggregate):
	Likewise.
	* config.in: Regenerate.
	* configure: Regenerate.

2020-04-30  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/57002
	* config/arm/arm.c (isr_attribute_args): Remove duplicate entries.

2020-04-30  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/constraints.md ("j>f", "jb4"): New constraints.
	* config/s390/vecintrin.h (vec_load_len_r, vec_store_len_r): Fix
	macro definitions.
	* config/s390/vx-builtins.md ("vlrlrv16qi", "vstrlrv16qi"): Add a
	separate expander.
	("*vlrlrv16qi", "*vstrlrv16qi"): Add alternative for vl/vst.
	Change constraint for vlrl/vstrl to jb4.

2020-04-30  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* var-tracking.c (vt_initialize): Move variables pre and post
	into inner block and initialize both in order to fix warning
	about uninitialized use.  Remove unnecessary checks for
	frame_pointer_needed.

2020-04-30  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	* toplev.c (output_stack_usage_1): Ensure that first
	argument to fprintf is not null.

2020-04-29  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac (-with-changes-root-url): New configure option,
	defaulting to https://gcc.gnu.org/.
	* Makefile.in (CFLAGS-opts.o): Define CHANGES_ROOT_URL for
	opts.c.
	* pretty-print.c (get_end_url_string): New function.
	(pp_format): Handle %{ and %} for URLs.
	(pp_begin_url): Use pp_string instead of pp_printf.
	(pp_end_url): Use get_end_url_string.
	* opts.h (get_changes_url): Declare.
	* opts.c (get_changes_url): New function.
	* config/rs6000/rs6000-call.c: Include opts.h.
	(rs6000_discover_homogeneous_aggregate): Use %{in GCC 10.1%} instead
	of just in GCC 10.1 in diagnostics and add URL.
	* config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Likewise.
	* config/aarch64/aarch64.c (aarch64_vfp_is_call_or_return_candidate):
	Likewise.
	* config/s390/s390.c (s390_function_arg_vector,
	s390_function_arg_float): Likewise.
	* configure: Regenerated.

	PR target/94704
	* config/s390/s390.c (s390_function_arg_vector,
	s390_function_arg_float): Use DECL_FIELD_ABI_IGNORED instead of
	cxx17_empty_base_field_p.  In -Wpsabi diagnostics use the type
	passed to the function rather than the type of the single element.
	Rename cxx17_empty_base_seen variable to empty_base_seen, change
	type to int, and adjust diagnostics depending on if the field
	has [[no_unique_attribute]] or not.

	PR target/94832
	* config/i386/avx512bwintrin.h (_mm512_alignr_epi8,
	_mm512_mask_alignr_epi8, _mm512_maskz_alignr_epi8): Wrap macro operands
	used in casts into parens.
	* config/i386/avx512fintrin.h (_mm512_cvt_roundps_ph, _mm512_cvtps_ph,
	_mm512_mask_cvt_roundps_ph, _mm512_mask_cvtps_ph,
	_mm512_maskz_cvt_roundps_ph, _mm512_maskz_cvtps_ph,
	_mm512_mask_cmp_epi64_mask, _mm512_mask_cmp_epi32_mask,
	_mm512_mask_cmp_epu64_mask, _mm512_mask_cmp_epu32_mask,
	_mm512_mask_cmp_round_pd_mask, _mm512_mask_cmp_round_ps_mask,
	_mm512_mask_cmp_pd_mask, _mm512_mask_cmp_ps_mask): Likewise.
	* config/i386/avx512vlbwintrin.h (_mm256_mask_alignr_epi8,
	_mm256_maskz_alignr_epi8, _mm_mask_alignr_epi8, _mm_maskz_alignr_epi8,
	_mm256_mask_cmp_epu8_mask): Likewise.
	* config/i386/avx512vlintrin.h (_mm_mask_cvtps_ph, _mm_maskz_cvtps_ph,
	_mm256_mask_cvtps_ph, _mm256_maskz_cvtps_ph): Likewise.
	* config/i386/f16cintrin.h (_mm_cvtps_ph, _mm256_cvtps_ph): Likewise.
	* config/i386/shaintrin.h (_mm_sha1rnds4_epu32): Likewise.

	PR target/94832
	* config/i386/avx2intrin.h (_mm_mask_i32gather_pd,
	_mm256_mask_i32gather_pd, _mm_mask_i64gather_pd,
	_mm256_mask_i64gather_pd, _mm_mask_i32gather_ps,
	_mm256_mask_i32gather_ps, _mm_mask_i64gather_ps,
	_mm256_mask_i64gather_ps, _mm_i32gather_epi64,
	_mm_mask_i32gather_epi64, _mm256_i32gather_epi64,
	_mm256_mask_i32gather_epi64, _mm_i64gather_epi64,
	_mm_mask_i64gather_epi64, _mm256_i64gather_epi64,
	_mm256_mask_i64gather_epi64, _mm_i32gather_epi32,
	_mm_mask_i32gather_epi32, _mm256_i32gather_epi32,
	_mm256_mask_i32gather_epi32, _mm_i64gather_epi32,
	_mm_mask_i64gather_epi32, _mm256_i64gather_epi32,
	_mm256_mask_i64gather_epi32): Surround macro parameter uses with
	parens.
	(_mm_i32gather_pd, _mm256_i32gather_pd, _mm_i64gather_pd,
	_mm256_i64gather_pd, _mm_i32gather_ps, _mm256_i32gather_ps,
	_mm_i64gather_ps, _mm256_i64gather_ps): Likewise.  Don't use
	as mask vector containing -1.0 or -1.0f elts, but instead vector
	with all bits set using _mm*_cmpeq_p? with zero operands.
	* config/i386/avx512fintrin.h (_mm512_i32gather_ps,
	_mm512_mask_i32gather_ps, _mm512_i32gather_pd,
	_mm512_mask_i32gather_pd, _mm512_i64gather_ps,
	_mm512_mask_i64gather_ps, _mm512_i64gather_pd,
	_mm512_mask_i64gather_pd, _mm512_i32gather_epi32,
	_mm512_mask_i32gather_epi32, _mm512_i32gather_epi64,
	_mm512_mask_i32gather_epi64, _mm512_i64gather_epi32,
	_mm512_mask_i64gather_epi32, _mm512_i64gather_epi64,
	_mm512_mask_i64gather_epi64, _mm512_i32scatter_ps,
	_mm512_mask_i32scatter_ps, _mm512_i32scatter_pd,
	_mm512_mask_i32scatter_pd, _mm512_i64scatter_ps,
	_mm512_mask_i64scatter_ps, _mm512_i64scatter_pd,
	_mm512_mask_i64scatter_pd, _mm512_i32scatter_epi32,
	_mm512_mask_i32scatter_epi32, _mm512_i32scatter_epi64,
	_mm512_mask_i32scatter_epi64, _mm512_i64scatter_epi32,
	_mm512_mask_i64scatter_epi32, _mm512_i64scatter_epi64,
	_mm512_mask_i64scatter_epi64): Surround macro parameter uses with
	parens.
	* config/i386/avx512pfintrin.h (_mm512_prefetch_i32gather_pd,
	_mm512_prefetch_i32gather_ps, _mm512_mask_prefetch_i32gather_pd,
	_mm512_mask_prefetch_i32gather_ps, _mm512_prefetch_i64gather_pd,
	_mm512_prefetch_i64gather_ps, _mm512_mask_prefetch_i64gather_pd,
	_mm512_mask_prefetch_i64gather_ps, _mm512_prefetch_i32scatter_pd,
	_mm512_prefetch_i32scatter_ps, _mm512_mask_prefetch_i32scatter_pd,
	_mm512_mask_prefetch_i32scatter_ps, _mm512_prefetch_i64scatter_pd,
	_mm512_prefetch_i64scatter_ps, _mm512_mask_prefetch_i64scatter_pd,
	_mm512_mask_prefetch_i64scatter_ps): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_mmask_i32gather_ps,
	_mm_mmask_i32gather_ps, _mm256_mmask_i32gather_pd,
	_mm_mmask_i32gather_pd, _mm256_mmask_i64gather_ps,
	_mm_mmask_i64gather_ps, _mm256_mmask_i64gather_pd,
	_mm_mmask_i64gather_pd, _mm256_mmask_i32gather_epi32,
	_mm_mmask_i32gather_epi32, _mm256_mmask_i32gather_epi64,
	_mm_mmask_i32gather_epi64, _mm256_mmask_i64gather_epi32,
	_mm_mmask_i64gather_epi32, _mm256_mmask_i64gather_epi64,
	_mm_mmask_i64gather_epi64, _mm256_i32scatter_ps,
	_mm256_mask_i32scatter_ps, _mm_i32scatter_ps, _mm_mask_i32scatter_ps,
	_mm256_i32scatter_pd, _mm256_mask_i32scatter_pd, _mm_i32scatter_pd,
	_mm_mask_i32scatter_pd, _mm256_i64scatter_ps,
	_mm256_mask_i64scatter_ps, _mm_i64scatter_ps, _mm_mask_i64scatter_ps,
	_mm256_i64scatter_pd, _mm256_mask_i64scatter_pd, _mm_i64scatter_pd,
	_mm_mask_i64scatter_pd, _mm256_i32scatter_epi32,
	_mm256_mask_i32scatter_epi32, _mm_i32scatter_epi32,
	_mm_mask_i32scatter_epi32, _mm256_i32scatter_epi64,
	_mm256_mask_i32scatter_epi64, _mm_i32scatter_epi64,
	_mm_mask_i32scatter_epi64, _mm256_i64scatter_epi32,
	_mm256_mask_i64scatter_epi32, _mm_i64scatter_epi32,
	_mm_mask_i64scatter_epi32, _mm256_i64scatter_epi64,
	_mm256_mask_i64scatter_epi64, _mm_i64scatter_epi64,
	_mm_mask_i64scatter_epi64): Likewise.

2020-04-29  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (H8/SX div patterns): All H8/SX specific
	division instructions are 4 bytes long.

2020-04-29  Jakub Jelinek  <jakub@redhat.com>

	PR target/94826
	* config/rs6000/rs6000.c (rs6000_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for first assignment to
	fenv_var, fenv_clear and old_fenv variables.  For fenv_addr
	take address of TARGET_EXPR of fenv_var with void_node initializer.
	Formatting fixes.

2020-04-29  Stefan Schulze Frielinghaus  <stefansf@linux.ibm.com>

	PR tree-optimization/94774
	* gimple-ssa-sprintf.c (try_substitute_return_value): Initialize
	variable retval.

2020-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.h (cxx17_empty_base_field_p): Turn into a function declaration.
	* calls.c (cxx17_empty_base_field_p): New function.  Check
	DECL_ARTIFICIAL and RECORD_OR_UNION_TYPE_P in addition to the
	previous checks.

2020-04-29  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/93654
	* config/i386/i386-options.c (ix86_set_indirect_branch_type):
	Allow -fcf-protection with -mindirect-branch=thunk-extern and
	-mfunction-return=thunk-extern.
	* doc/invoke.texi: Update notes for -fcf-protection=branch with
	-mindirect-branch=thunk-extern and -mindirect-return=thunk-extern.

2020-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi: Add missing arm_arch_v8a_hard_ok anchor.

2020-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm-builtins.c (arm_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for the first assignments to
	fenv_var and new_fenv_var.

2020-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (arm_arch_v8a_hard_ok): Document new
	effective-target keyword.
	(arm_arch_v8a_hard_multilib): Likewise.
	(arm_arch_v8a_hard): Document new dg-add-options keyword.
	* config/arm/arm.c (arm_return_in_memory): Note that the APCS
	code is deprecated and has not been updated to handle
	DECL_FIELD_ABI_IGNORED.
	(WARN_PSABI_EMPTY_CXX17_BASE): New constant.
	(WARN_PSABI_NO_UNIQUE_ADDRESS): Likewise.
	(aapcs_vfp_sub_candidate): Replace the boolean pointer parameter
	avoid_cxx17_empty_base with a pointer to a bitmask.  Ignore fields
	whose DECL_FIELD_ABI_IGNORED bit is set when determining whether
	something actually is a HFA or HVA.  Record whether we see a
	[[no_unique_address]] field that previous GCCs would not have
	ignored in this way.
	(aapcs_vfp_is_call_or_return_candidate): Update the calls to
	aapcs_vfp_sub_candidate and report a -Wpsabi warning for the
	[[no_unique_address]] case.  Use TYPE_MAIN_VARIANT in the
	diagnostic messages.
	(arm_needs_doubleword_align): Add a comment explaining why we
	consider even zero-sized fields.

2020-04-29  Richard Biener  <rguenther@suse.de>
	    Li Zekun  <lizekun1@huawei.com>

	PR lto/94822
	* tree.c (component_ref_size): Guard against error_mark_node
	DECL_INITIAL as it happens with LTO.

2020-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_function_arg_alignment): Add a
	comment explaining why we consider even zero-sized fields.
	(WARN_PSABI_EMPTY_CXX17_BASE): New constant.
	(WARN_PSABI_NO_UNIQUE_ADDRESS): Likewise.
	(aapcs_vfp_sub_candidate): Replace the boolean pointer parameter
	avoid_cxx17_empty_base with a pointer to a bitmask.  Ignore fields
	whose DECL_FIELD_ABI_IGNORED bit is set when determining whether
	something actually is a HFA or HVA.  Record whether we see a
	[[no_unique_address]] field that previous GCCs would not have
	ignored in this way.
	(aarch64_vfp_is_call_or_return_candidate): Add a parameter to say
	whether diagnostics should be suppressed.  Update the calls to
	aapcs_vfp_sub_candidate and report a -Wpsabi warning for the
	[[no_unique_address]] case.
	(aarch64_return_in_msb): Update call accordingly, never silencing
	diagnostics.
	(aarch64_function_value): Likewise.
	(aarch64_return_in_memory_1): Likewise.
	(aarch64_init_cumulative_args): Likewise.
	(aarch64_gimplify_va_arg_expr): Likewise.
	(aarch64_pass_by_reference_1): Take a CUMULATIVE_ARGS pointer and
	use it to decide whether arch64_vfp_is_call_or_return_candidate
	should be silent.
	(aarch64_pass_by_reference): Update calls accordingly.
	(aarch64_vfp_is_call_candidate): Use the CUMULATIVE_ARGS argument
	to decide whether arch64_vfp_is_call_or_return_candidate should be
	silent.

2020-04-29  Haijian Zhang  <z.zhanghaijian@huawei.com>

	PR target/94820
	* config/aarch64/aarch64-builtins.c
	(aarch64_atomic_assign_expand_fenv): Use TARGET_EXPR instead of
	MODIFY_EXPR for first assignment to fenv_cr, fenv_sr and
	new_fenv_var.

2020-04-29  Thomas Schwinge  <thomas@codesourcery.com>

	* configure.ac <$enable_offload_targets>: Do parsing as done
	elsewhere.
	* configure: Regenerate.

	* configure.ac <$enable_offload_targets>: 'amdgcn' is 'gcn'.
	* configure: Regenerate.

	PR target/94279
	* rtlanal.c (set_noop_p): Handle non-constant selectors.

	PR target/94282
	* common/config/gcn/gcn-common.c (gcn_except_unwind_info): New
	function.
	(TARGET_EXCEPT_UNWIND_INFO): Define.

2020-04-29  Jakub Jelinek  <jakub@redhat.com>

	PR target/94248
	* config/gcn/gcn.md (*mov<mode>_insn): Use
	'reg_overlap_mentioned_p' to check for overlap.

	PR target/94706
	* config/ia64/ia64.c (hfa_element_mode): Use DECL_FIELD_ABI_IGNORED
	instead of cxx17_empty_base_field_p.

	PR target/94707
	* tree-core.h (tree_decl_common): Note decl_flag_0 used for
	DECL_FIELD_ABI_IGNORED.
	* tree.h (DECL_FIELD_ABI_IGNORED): Define.
	* calls.h (cxx17_empty_base_field_p): Change into a temporary
	macro, check DECL_FIELD_ABI_IGNORED flag with no "no_unique_address"
	attribute.
	* calls.c (cxx17_empty_base_field_p): Remove.
	* tree-streamer-out.c (pack_ts_decl_common_value_fields): Handle
	DECL_FIELD_ABI_IGNORED.
	* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Likewise.
	* lto-streamer-out.c (hash_tree): Likewise.
	* config/rs6000/rs6000-call.c (rs6000_aggregate_candidate): Rename
	cxx17_empty_base_seen to empty_base_seen, change type to int *,
	adjust recursive calls, use DECL_FIELD_ABI_IGNORED instead of
	cxx17_empty_base_field_p, if "no_unique_address" attribute is
	present, propagate that to the caller too.
	(rs6000_discover_homogeneous_aggregate): Adjust
	rs6000_aggregate_candidate caller, emit different diagnostics
	when c++17 empty base fields are present and when empty
	[[no_unique_address]] fields are present.
	* config/rs6000/rs6000.c (rs6000_special_round_type_align,
	darwin_rs6000_special_round_type_align): Skip DECL_FIELD_ABI_IGNORED
	fields.

2020-04-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa-loop-im.c (ref_always_accessed::operator ()):
	Just check whether the stmt stores.

2020-04-28  Alexandre Oliva <oliva@adacore.com>

	PR target/94812
	* config/rs6000/rs6000.md (rs6000_mffsl): Copy result to
	output operand in emulation.  Don't overwrite pseudos.

2020-04-28  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (H8/SX mult patterns): All H8/SX specific
	multiply patterns are 4 bytes long.

2020-04-28  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (cortex-m55): Remove +nofp option.
	* doc/invoke.texi (Arm Options): Remove -mcpu=cortex-m55 from +nofp option.

2020-04-28  Matthew Malcomson  <matthew.malcomson@arm.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/94711
	* config/arm/arm.c (aapcs_vfp_sub_candidate): Account for C++17 empty
	base class artificial fields.
	(aapcs_vfp_is_call_or_return_candidate): Warn when PCS ABI
	decision is different after this fix.

2020-04-28  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/94447
	PR analyzer/94639
	PR analyzer/94732
	PR analyzer/94754
	* doc/invoke.texi (Static Analyzer Options): Remove
	-Wanalyzer-use-of-uninitialized-value.
	(-Wno-analyzer-use-of-uninitialized-value): Remove item.

2020-04-28  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94809
	* tree.c (build_call_expr_internal_loc_array): Call
	process_call_operands.

2020-04-27  Anton Youdkevitch  <anton.youdkevitch@bell-sw.com>

	* config/aarch64/aarch64-cores.def (thunderx3t110): Add the chip name.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* config/aarch64/aarch64.c (thunderx3t110_addrcost_table): Define.
	(thunderx3t110_regmove_cost): Likewise.
	(thunderx3t110_vector_cost): Likewise.
	(thunderx3t110_prefetch_tune): Likewise.
	(thunderx3t110_tunings): Likewise.
	* config/aarch64/aarch64-cost-tables.h (thunderx3t110_extra_costs):
	Define.
	* config/aarch64/thunderx3t110.md: New file.
	* config/aarch64/aarch64.md: Include thunderx3t110.md.
	* doc/invoke.texi (AArch64 options): Add thunderx3t110.

2020-04-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/94704
	* config/s390/s390.c (s390_function_arg_vector,
	s390_function_arg_float): Emit -Wpsabi diagnostics if the ABI changed.

2020-04-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94727
	* tree-vect-stmts.c (vect_is_simple_cond): If both comparison
	operands are invariant booleans, use the mask type associated with the
	STMT_VINFO_VECTYPE.  Use !slp_node instead of !vectype to exclude SLP.
	(vectorizable_condition): Pass vectype unconditionally to
	vect_is_simple_cond.

2020-04-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/94780
	* config/i386/i386.c (ix86_atomic_assign_expand_fenv): Use
	TARGET_EXPR instead of MODIFY_EXPR for first assignment to
	sw_var, exceptions_var, mxcsr_orig_var and mxcsr_mod_var.

2020-04-27  David Malcolm  <dmalcolm@redhat.com>

	PR 92830
	* configure.ac (DOCUMENTATION_ROOT_URL): Drop trailing "gcc/" from
	default value, so that it can by supplied by get_option_html_page.
	* configure: Regenerate.
	* opts.c: Include "selftest.h".
	(get_option_html_page): New function.
	(get_option_url): Use it.  Reformat to place comments next to the
	expressions they refer to.
	(selftest::test_get_option_html_page): New.
	(selftest::opts_c_tests): New.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::opts_c_tests.
	* selftest.h (selftest::opts_c_tests): New decl.

2020-04-27  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm-builtins.c (arm_expand_builtin_args): Only apply
	UINTVAL to CONST_INTs.

2020-04-27  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/constraints.md (e): Remove constraint.
	(Te): Define constraint.
	* config/arm/mve.md (vaddvq_<supf><mode>): Modify constraint in
	operand 0 from "e" to "Te".
	(vaddvaq_<supf><mode>): Likewise.
	(vaddvq_p_<supf><mode>): Likewise.
	(vmladavq_<supf><mode>): Likewise.
	(vmladavxq_s<mode>): Likewise.
	(vmlsdavq_s<mode>): Likewise.
	(vmlsdavxq_s<mode>): Likewise.
	(vaddvaq_p_<supf><mode>): Likewise.
	(vmladavaq_<supf><mode>): Likewise.
	(vmladavq_p_<supf><mode>): Likewise.
	(vmladavxq_p_s<mode>): Likewise.
	(vmlsdavq_p_s<mode>): Likewise.
	(vmlsdavxq_p_s<mode>): Likewise.
	(vmlsdavaxq_s<mode>): Likewise.
	(vmlsdavaq_s<mode>): Likewise.
	(vmladavaxq_s<mode>): Likewise.
	(vmladavaq_p_<supf><mode>): Likewise.
	(vmladavaxq_p_s<mode>): Likewise.
	(vmlsdavaq_p_s<mode>): Likewise.
	(vmlsdavaxq_p_s<mode>): Likewise.

2020-04-27  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.c (output_move_neon): Only get the first operand if
	addr is PLUS.

2020-04-27  Felix Yang  <felix.yang@huawei.com>

	PR tree-optimization/94784
	* tree-ssa-forwprop.c (simplify_vector_constructor): Flip the
	assert around so that it checks that the two vectors have equal
	TYPE_VECTOR_SUBPARTS and that converting the corresponding element
	types is a useless_type_conversion_p.

2020-04-27  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94515
	* dwarf2cfi.c (struct GTY): Add ra_mangled.
	(cfi_row_equal_p): Check ra_mangled.
	(dwarf2out_frame_debug_cfa_window_save): Remove the argument,
	this only handles the sparc logic now.
	(dwarf2out_frame_debug_cfa_toggle_ra_mangle): New function for
	the aarch64 specific logic.
	(dwarf2out_frame_debug): Update to use the new subroutines.
	(change_cfi_row): Check ra_mangled.

2020-04-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/94704
	* config/s390/s390.c (s390_function_arg_vector,
	s390_function_arg_float): Ignore cxx17_empty_base_field_p fields.

2020-04-27  Jiufu Guo   <guojiufu@cn.ibm.com>

	* common/config/rs6000/rs6000-common.c
	(rs6000_option_optimization_table) [OPT_LEVELS_ALL]: Remove turn off
	-fweb.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Avoid to
	set flag_web.

2020-04-27  Martin Liska  <mliska@suse.cz>

	PR lto/94659
	* cgraph.h (cgraph_node::can_remove_if_no_direct_calls_and_refs_p):
	Do not remove ifunc_resolvers in remove unreachable nodes in LTO.

2020-04-27  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR target/91518
	* config/rs6000/rs6000-logue.c (frame_pointer_needed_indeed):
	New variable.
	(rs6000_emit_prologue_components):
	Check with frame_pointer_needed_indeed.
	(rs6000_emit_epilogue_components): Likewise.
	(rs6000_emit_prologue): Likewise.
	(rs6000_emit_epilogue): Set frame_pointer_needed_indeed.

2020-04-25  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000-logue.c (rs6000_stack_info): Don't push a
	stack frame when debugging and flag_compare_debug is enabled.

2020-04-25  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/linux64.h (PCREL_SUPPORTED_BY_OS): Define to
	enable PC-relative addressing for -mcpu=future.
	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Move
	after OTHER_FUTURE_MASKS.  Use OTHER_FUTURE_MASKS.
	* config/rs6000/rs6000.c (PCREL_SUPPORTED_BY_OS): If not defined,
	suppress PC-relative addressing.
	(rs6000_option_override_internal): Split up error messages
	checking for -mprefixed and -mpcrel.  Enable -mpcrel if the target
	system supports it.

2020-04-25  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94734
	PR tree-optimization/89430
	* tree-ssa-phiopt.c: Include tree-eh.h.
	(cond_store_replacement): Return false if an automatic variable
	access could trap.  If -fstore-data-races, don't return false
	just because an automatic variable is addressable.

2020-04-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (add<mode>_zext_dup2_exec): Fix merge
	of high-part.
	(add<mode>_sext_dup2_exec): Likewise.

2020-04-24  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/94710
	* config/rs6000/vector.md (vec_shr_<mode> for VEC_L): Correct little
	endian byteshift_val calculation.

2020-04-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (*mov<mode>_insn): Only split post-reload.

2020-04-24  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/arm_sve.h: Add a comment.

2020-04-24  Haijian Zhang <z.zhanghaijian@huawei.com>

	PR rtl-optimization/94708
	* combine.c (simplify_if_then_else): Add check for
	!HONOR_NANS (mode) && !HONOR_SIGNED_ZEROS (mode).

2020-04-23  Martin Sebor  <msebor@redhat.com>

	PR driver/90983
	* common.opt (-Wno-frame-larger-than): New option.
	(-Wno-larger-than, -Wno-stack-usage): Same.

2020-04-23  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (mov<mode>_exec): Swap the numbers on operands
	2 and 3.
	(mov<mode>_exec): Likewise.
	(trunc<vndi><mode>2_exec): Swap parameters to gen_mov<mode>_exec.
	(<convop><mode><vndi>2_exec): Likewise.

2019-04-23  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/94717
	* gimple-ssa-store-merging.c (try_coalesce_bswap): Return false if one
	of the stores doesn't have the same landing pad number as the first.
	(coalesce_immediate_stores): Do not try to coalesce the store using
	bswap if it doesn't have the same landing pad number as the first.

2020-04-23  Bill Schmidt  <wschmidt@linux.ibm.com>

	* doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions):
	Replace outdated link to ELFv2 ABI.

2020-04-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/94710
	* optabs.c (expand_vec_perm_const): For shift_amt const0_rtx
	just return v2.

	PR middle-end/94724
	* tree.c (get_narrower): Instead of creating COMPOUND_EXPRs
	temporarily with non-final second operand and updating it later,
	push COMPOUND_EXPRs into a vector and process it in reverse,
	creating COMPOUND_EXPRs with the final operands.

2020-04-23  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/94697
	* config/aarch64/aarch64-bti-insert.c (rest_of_insert_bti): Swap
	bti c and bti j handling.

2020-04-23  Andrew Stubbs  <ams@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/93488

	* omp-expand.c (expand_omp_target): Use force_gimple_operand_gsi on
	t_async and the wait arguments.

2020-04-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94727
	* tree-vect-stmts.c (vectorizable_comparison): Use mask_type when
	comparing invariant scalar booleans.

2020-04-23  Matthew Malcomson  <matthew.malcomson@arm.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/94383
	* config/aarch64/aarch64.c (aapcs_vfp_sub_candidate): Account for C++17
	empty base class artificial fields.
	(aarch64_vfp_is_call_or_return_candidate): Warn when ABI PCS decision is
	different after this fix.

2020-04-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/94707
	* config/rs6000/rs6000-call.c (rs6000_discover_homogeneous_aggregate):
	Use TYPE_UID (TYPE_MAIN_VARIANT (type)) instead of type to check
	if the same type has been diagnosed most recently already.

2020-04-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (__arm_vbicq_n_u16): Modify function parameter's
	datatype.
	(__arm_vbicq_n_s16): Likewise.
	(__arm_vbicq_n_u32): Likewise.
	(__arm_vbicq_n_s32): Likewise.
	(__arm_vbicq): Likewise.
	(__arm_vbicq_n_s16): Modify MVE polymorphic variant argument's datatype.
	(__arm_vbicq_n_s32): Likewise.
	(__arm_vbicq_n_u16): Likewise.
	(__arm_vbicq_n_u32): Likewise.
	(__arm_vdupq_m_n_s8): Likewise.
	(__arm_vdupq_m_n_s16): Likewise.
	(__arm_vdupq_m_n_s32): Likewise.
	(__arm_vdupq_m_n_u8): Likewise.
	(__arm_vdupq_m_n_u16): Likewise.
	(__arm_vdupq_m_n_u32): Likewise.
	(__arm_vdupq_m_n_f16): Likewise.
	(__arm_vdupq_m_n_f32): Likewise.
	(__arm_vldrhq_gather_offset_s16): Likewise.
	(__arm_vldrhq_gather_offset_s32): Likewise.
	(__arm_vldrhq_gather_offset_u16): Likewise.
	(__arm_vldrhq_gather_offset_u32): Likewise.
	(__arm_vldrhq_gather_offset_f16): Likewise.
	(__arm_vldrhq_gather_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_offset_z_u16): Likewise.
	(__arm_vldrhq_gather_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_offset_z_f16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_f16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_f16): Likewise.
	(__arm_vldrwq_gather_offset_s32): Likewise.
	(__arm_vldrwq_gather_offset_u32): Likewise.
	(__arm_vldrwq_gather_offset_f32): Likewise.
	(__arm_vldrwq_gather_offset_z_s32): Likewise.
	(__arm_vldrwq_gather_offset_z_u32): Likewise.
	(__arm_vldrwq_gather_offset_z_f32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_s32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_u32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_f32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_z_s32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_z_u32): Likewise.
	(__arm_vldrwq_gather_shifted_offset_z_f32): Likewise.
	(__arm_vdwdupq_x_n_u8): Likewise.
	(__arm_vdwdupq_x_n_u16): Likewise.
	(__arm_vdwdupq_x_n_u32): Likewise.
	(__arm_viwdupq_x_n_u8): Likewise.
	(__arm_viwdupq_x_n_u16): Likewise.
	(__arm_viwdupq_x_n_u32): Likewise.
	(__arm_vidupq_x_n_u8): Likewise.
	(__arm_vddupq_x_n_u8): Likewise.
	(__arm_vidupq_x_n_u16): Likewise.
	(__arm_vddupq_x_n_u16): Likewise.
	(__arm_vidupq_x_n_u32): Likewise.
	(__arm_vddupq_x_n_u32): Likewise.
	(__arm_vldrdq_gather_offset_s64): Likewise.
	(__arm_vldrdq_gather_offset_u64): Likewise.
	(__arm_vldrdq_gather_offset_z_s64): Likewise.
	(__arm_vldrdq_gather_offset_z_u64): Likewise.
	(__arm_vldrdq_gather_shifted_offset_s64): Likewise.
	(__arm_vldrdq_gather_shifted_offset_u64): Likewise.
	(__arm_vldrdq_gather_shifted_offset_z_s64): Likewise.
	(__arm_vldrdq_gather_shifted_offset_z_u64): Likewise.
	(__arm_vidupq_m_n_u8): Likewise.
	(__arm_vidupq_m_n_u16): Likewise.
	(__arm_vidupq_m_n_u32): Likewise.
	(__arm_vddupq_m_n_u8): Likewise.
	(__arm_vddupq_m_n_u16): Likewise.
	(__arm_vddupq_m_n_u32): Likewise.
	(__arm_vidupq_n_u16): Likewise.
	(__arm_vidupq_n_u32): Likewise.
	(__arm_vidupq_n_u8): Likewise.
	(__arm_vddupq_n_u16): Likewise.
	(__arm_vddupq_n_u32): Likewise.
	(__arm_vddupq_n_u8): Likewise.

2020-04-23  Iain Buclaw  <ibuclaw@gdcproject.org>

	* doc/install.texi (D-Specific Options): Document
	--enable-libphobos-checking and --with-libphobos-druntime-only.

2020-04-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/94707
	* config/rs6000/rs6000-call.c (rs6000_aggregate_candidate): Add
	cxx17_empty_base_seen argument.  Pass it to recursive calls.
	Ignore cxx17_empty_base_field_p fields after setting
	*cxx17_empty_base_seen to true.
	(rs6000_discover_homogeneous_aggregate): Adjust
	rs6000_aggregate_candidate caller.  With -Wpsabi, diagnose homogeneous
	aggregates with C++17 empty base fields.

	PR c/94705
	* attribs.c (decl_attribute): Don't diagnose attribute exclusions
	if last_decl is error_mark_node or has such a TREE_TYPE.

	PR c/94705
	* attribs.c (decl_attribute): Don't diagnose attribute exclusions
	if last_decl is error_mark_node or has such a TREE_TYPE.

2020-04-22  Felix Yang  <felix.yang@huawei.com>

	PR target/94678
	* config/aarch64/aarch64.h (TARGET_SVE):
	Add && !TARGET_GENERAL_REGS_ONLY.
	(TARGET_SVE2): Add && TARGET_SVE.
	(TARGET_SVE2_AES, TARGET_SVE2_BITPERM, TARGET_SVE2_SHA3,
	TARGET_SVE2_SM4): Add && TARGET_SVE2.
	* config/aarch64/aarch64-sve-builtins.h
	(sve_switcher::m_old_general_regs_only): New member.
	* config/aarch64/aarch64-sve-builtins.cc (check_required_registers):
	New function.
	(reported_missing_registers_p): New variable.
	(check_required_extensions): Call check_required_registers before
	return if all required extenstions are present.
	(sve_switcher::sve_switcher): Save TARGET_GENERAL_REGS_ONLY in
	m_old_general_regs_only and clear MASK_GENERAL_REGS_ONLY in
	global_options.x_target_flags.
	(sve_switcher::~sve_switcher): Set MASK_GENERAL_REGS_ONLY in
	global_options.x_target_flags if m_old_general_regs_only is true.

2020-04-22  Zackery Spytz  <zspytz@gmail.com>

	* doc/extend.exi: Add "free" to list of other builtin functions
	supported by GCC.

2020-04-20  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/94622
	* config/rs6000/sync.md (load_quadpti): Add attr "prefixed"
	if TARGET_PREFIXED.
	(store_quadpti): Ditto.
	(atomic_load<mode>): Do not swap doublewords if TARGET_PREFIXED as
	plq will be used and doesn't need it.
	(atomic_store<mode>): Ditto, for pstq.

2020-04-22  Erick Ochoa  <erick.ochoa@theobroma-systems.com>

	* doc/invoke.texi: Update flags turned on by -O3.

2020-04-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/94706
	* config/ia64/ia64.c (hfa_element_mode): Ignore
	cxx17_empty_base_field_p fields.

	PR target/94383
	* calls.h (cxx17_empty_base_field_p): Declare.
	* calls.c (cxx17_empty_base_field_p): Define.

2020-04-22  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (arm_softfp_ok, arm_hard_ok): Document.

2020-04-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm.c (arm_file_start): Handle isa_bit_quirk_no_asmcpu.
	* config/arm/arm-cpus.in (quirk_no_asmcpu): Define.
	(ALL_QUIRKS): Add quirk_no_asmcpu.
	(cortex-m55): Define new cpu.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.texi (Arm Options): Document -mcpu=cortex-m55.

2020-04-22  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94700
	* tree-ssa-forwprop.c (simplify_vector_constructor): When processing
	an identity constructor, use a VIEW_CONVERT_EXPR to handle mixtures
	of similarly-structured but distinct vector types.

2020-04-21  Martin Sebor  <msebor@redhat.com>

	PR middle-end/94647
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Correct
	the computation of the lower bound of the source access size.
	(builtin_access::generic_overlap): Remove a hack for setting ranges
	of overlap offsets.

2020-04-21  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/som.h (ASM_WEAKEN_LABEL): Delete.
	(ASM_WEAKEN_DECL): New define.
	(HAVE_GAS_WEAKREF): Undefine.

2020-04-21  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/94683
	* tree-ssa-forwprop.c (simplify_vector_constructor): Use a
	VIEW_CONVERT_EXPR to handle mixtures of similarly-structured
	but distinct vector types.

2020-04-21  Jakub Jelinek  <jakub@redhat.com>

	PR c/94641
	* stor-layout.c (place_field, finalize_record_size): Don't emit
	-Wpadded warning on TYPE_ARTIFICIAL rli->t.
	* ubsan.c (ubsan_get_type_descriptor_type,
	ubsan_get_source_location_type, ubsan_create_data): Set
	TYPE_ARTIFICIAL.
	* asan.c (asan_global_struct): Likewise.

2020-04-21  Duan bo  <duanbo3@huawei.com>

	PR target/94577
	* config/aarch64/aarch64.c: Add an error message for option conflict.
	* doc/invoke.texi (-mcmodel=large): Mention that -mcmodel=large is
	incompatible with -fpic, -fPIC and -mabi=ilp32.

2020-04-21  Frederik Harwath  <frederik@codesourcery.com>

	PR other/94629
	* omp-low.c (new_omp_context): Remove assignments to
	ctx->outer_reduction_clauses and ctx->local_reduction_clauses.

2020-04-20  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md ("popcountv8hi2_vx", "popcountv4si2_vx")
	("popcountv2di2_vx"): Use simplify_gen_subreg.

2020-04-20  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/94613
	* config/s390/s390-builtin-types.def: Add 3 new function modes.
	* config/s390/s390-builtins.def: Add mode dependent low-level
	builtin and map the overloaded builtins to these.
	* config/s390/vx-builtins.md ("vec_selV_HW"): Rename to ...
	("vsel<V_HW"): ... this and rewrite the pattern with bitops.

2020-04-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_better_loop_vinfo_p): If old_loop_vinfo
	has a variable VF, prefer new_loop_vinfo if it is cheaper for the
	estimated VF and is no worse at double the estimated VF.

2020-04-20  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/94668
	* config/aarch64/aarch64.c (aarch64_sve_expand_vector_init): Fix
	order of arguments to rtx_vector_builder.
	(aarch64_sve_expand_vector_init_handle_trailing_constants): Likewise.
	When extending the trailing constants to a full vector, replace any
	variables with zeros.

2020-04-20  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/94582
	* tree-inline.c (optimize_inline_calls): Recompute calls_comdat_local
	flag.

2020-04-20  Martin Liska  <mliska@suse.cz>

	* symtab.c (symtab_node::dump_references): Add space after
	one entry.
	(symtab_node::dump_referring): Likewise.

2020-04-18  Jeff Law  <law@redhat.com>

	PR debug/94439
	* regrename.c (check_new_reg_p): Ignore DEBUG_INSNs when walking
	the chain.

2020-04-18  Iain Buclaw  <ibuclaw@gdcproject.org>

	* doc/sourcebuild.texi (Effective-Target Keywords, Environment
	attributes): Document d_runtime_has_std_library.

2020-04-17  Jeff Law  <law@redhat.com>

	PR rtl-optimization/90275
	* cse.c (cse_insn): Avoid recording nop sets in multi-set parallels
	when the destination has a REG_UNUSED note.

2020-04-17  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/94635
	* gimplify.c (gimplify_scan_omp_clauses): Turn MAP_TO_PSET to
	MAP_DELETE.

2020-04-17  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_advsimd_ldp_stp_p): New function.
	(aarch64_sve_adjust_stmt_cost): Add a vectype parameter.  Double the
	cost of load and store insns if one loop iteration has enough scalar
	elements to use an Advanced SIMD LDP or STP.
	(aarch64_add_stmt_cost): Update call accordingly.

2020-04-17  Jakub Jelinek  <jakub@redhat.com>
	    Jeff Law  <law@redhat.com>

	PR target/94567
	* config/i386/i386.md (*testqi_ext_3): Use CCZmode rather than
	CCNOmode in ix86_match_ccmode if len is equal to <MODE>mode precision,
	or pos + len >= 32, or pos + len is equal to operands[2] precision
	and operands[2] is not a register operand.  During splitting perform
	SImode AND if operands[0] doesn't have CCZmode and pos + len is
	equal to mode precision.

2020-04-17  Richard Biener  <rguenther@suse.de>

	PR other/94629
	* cgraphclones.c (cgraph_node::create_clone): Remove duplicate
	initialization.
	* dwarf2out.c (dw_val_equal_p): Fix pasto in
	dw_val_class_vms_delta comparison.
	* optabs.c (expand_binop_directly): Fix pasto in commutation
	check.
	* tree-ssa-sccvn.c (vn_reference_lookup_pieces): Fix pasto in
	initialization.

2020-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94618
	* cfgrtl.c (delete_insn_and_edges): Set purge not just when
	insn is the BB_END of its block, but also when it is only followed
	by DEBUG_INSNs in its block.

	PR tree-optimization/94621
	* tree-inline.c (remap_type_1): Don't dereference NULL TYPE_DOMAIN.
	Move id->adjust_array_error_bounds check first in the condition.

2020-04-17  Martin Liska  <mliska@suse.cz>
	    Jonathan Yong <10walls@gmail.com>

	PR gcov-profile/94570
	* coverage.c (coverage_init): Use separator properly.

2020-04-16  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/93974
	* config/rs6000/rs6000.c (TARGET_CANNOT_SUBSTITUTE_MEM_EQUIV_P): Define.
	(rs6000_cannot_substitute_mem_equiv_p): New function.

2020-04-16  Martin Jambor  <mjambor@suse.cz>

	PR ipa/93621
	* ipa-inline.h (ipa_saved_clone_sources): Declare.
	* ipa-inline-transform.c (ipa_saved_clone_sources): New variable.
	(save_inline_function_body): Link the new body holder with the
	previous one.
	* cgraph.c: Include ipa-inline.h.
	(cgraph_edge::redirect_call_stmt_to_callee): Try to find the decl from
	the statement in ipa_saved_clone_sources.
	* cgraphunit.c: Include ipa-inline.h.
	(expand_all_functions): Free ipa_saved_clone_sources.

2020-04-16  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/94606
	* config/aarch64/aarch64.c (aarch64_expand_sve_const_pred_eor): Take
	the VNx16BI lowpart of the recursively-generated constant.

2020-04-16  Martin Liska  <mliska@suse.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR c++/94314
	* cgraphclones.c (set_new_clone_decl_and_node_flags): Drop
	DECL_IS_REPLACEABLE_OPERATOR during cloning.
	* tree-ssa-dce.c (valid_new_delete_pair_p): New function.
	(propagate_necessity): Check operator names.

2020-04-16  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/94605
	* early-remat.c (early_remat::process_block): Handle insns that
	set multiple candidate registers.
2020-04-16  Jan Hubicka  <hubicka@ucw.cz>
	
	PR gcov-profile/93401
	* common.opt (profile-prefix-path): New option.
	* coverae.c: Include diagnostics.h.
	(coverage_init): Strip profile prefix path.
	* doc/invoke.texi (-fprofile-prefix-path): Document.

2020-04-16  Richard Biener  <rguenther@suse.de>

	PR middle-end/94614
	* expr.c (emit_move_multi_word): Do not generate code when
	the destination part is undefined_operand_subword_p.
	* lower-subreg.c (resolve_clobber): Look through a paradoxica
	subreg.

2020-04-16  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/94598
	* tree-sra.c (verify_sra_access_forest): Fix verification of total
	scalarization accesses under access to one-element arrays.

2020-04-16  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/89494
	* function.c (assign_parm_find_data_types): Add workaround for
	BROKEN_VALUE_INITIALIZATION compilers.

2020-04-16  Richard Biener  <rguenther@suse.de>

	* gdbhooks.py (TreePrinter): Print SSA_NAME_VERSION of SSA_NAME
	nodes.

2020-04-15  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/94603
	* config/i386/i386-builtin.def (__builtin_ia32_movq128):
	Require OPTION_MASK_ISA_SSE2.

2020-04-15  Gustavo Romero  <gromero@linux.ibm.com>

	PR bootstrap/89494
	* dumpfile.c (selftest::temp_dump_context::temp_dump_context):
	Don't construct a dump_context temporary to call static method.

2020-04-15  Andrea Corallo  <andrea.corallo@arm.com>

	* config/aarch64/falkor-tag-collision-avoidance.c
	(valid_src_p): Check for aarch64_address_info type before
	accessing base field.

2020-04-15  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/mve.md (mve_vec_duplicate<mode>): New pattern.
	(V_sz_elem2): Remove unused mode attribute.

2020-04-15  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/arm/arm.md (arm_movdi): Disallow for MVE.

2020-04-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/94539
	* tree-ssa-alias.c (same_type_for_tbaa): Defer to
	alias_sets_conflict_p for pointers.

2020-04-14  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/94584
	* config/xtensa/xtensa.md (zero_extendhisi2, zero_extendqisi2)
	(extendhisi2_internal): Add %v1 before the load instructions.

2020-04-14  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/94542
	* config/rs6000/rs6000.c (address_to_insn_form): Do not attempt to
	use PC-relative addressing for TLS references.

2020-04-14  Martin Jambor  <mjambor@suse.cz>

	PR ipa/94434
	* ipa-sra.c: Include internal-fn.h.
	(enum isra_scan_context): Update comment.
	(scan_function): Treat calls to internal_functions like loads or stores.

2020-04-14  Yang Yang <yangyang305@huawei.com>

	PR tree-optimization/94574
	* tree-ssa.c (non_rewritable_lvalue_p): Add size check when analyzing
	whether a vector-insert is rewritable using a BIT_INSERT_EXPR.

2020-04-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/94561
	* config/i386/i386.c (ix86_get_ssemov): Remove mode size check.

2020-04-13  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (-Wall): Mention -Wformat-overflow and
	-Wformat-truncation.  Move -Wzero-length-bounds last.
	(-Wrestrict): Document positive form of option enabled by -Wall.

2020-04-13 Zachary Spytz  <zspytz@gmail.com>

	* doc/extend.texi: Add realloc to list of built-in functions
	are recognized by the compiler.

2020-04-13  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/94556
	* config/i386/i386.c (ix86_expand_epilogue): Restore the frame
	pointer in word_mode for eh_return epilogues.

2020-04-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_print_operand): Don't add offsets to
	memory references in %B, %C and %D operand selectors when the inner
	operand is a post increment address.

2020-04-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_print_operand): Offset a %C memory
	reference by 4 bytes, and %D memory reference by 6 bytes.

2020-04-11  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/94494
	* config/i386/sse.md (REDUC_SSE_SMINMAX_MODE): Use TARGET_SSE2
	condition for V4SI, V8HI and V16QI modes.

2020-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR debug/94495
	PR target/94551
	* cselib.c (cselib_record_sp_cfa_base_equiv): Set PRESERVED_VALUE_P on
	val->val_rtx.

2020-04-10  Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/89433
	PR middle-end/93465
	* omp-general.c (oacc_verify_routine_clauses): Diagnose if
	"#pragma omp declare target" has also been applied.

2020-04-09  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_expand_epilogue): Use emit_jump_insn
	when to emit the epilogue_helper insn.
	* config/msp430/msp430.md (epilogue_helper): Add a return insn to the
	RTL pattern.

2020-04-09  Jakub Jelinek  <jakub@redhat.com>

	PR debug/94495
	* cselib.h (cselib_record_sp_cfa_base_equiv,
	cselib_sp_derived_value_p): Declare.
	* cselib.c (cselib_record_sp_cfa_base_equiv,
	cselib_sp_derived_value_p): New functions.
	* var-tracking.c (add_stores): Don't record MO_VAL_SET for
	cselib_sp_derived_value_p values.
	(vt_initialize): Call cselib_record_sp_cfa_base_equiv at the
	start of extended basic blocks other than the first one
	for !frame_pointer_needed functions.

2020-04-09  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (aarch64_sve_hw, aarch64_sve128_hw)
	(aarch64_sve256_hw, aarch64_sve512_hw, aarch64_sve1024_hw)
	(aarch64_sve2048_hw): Document.
	* config/aarch64/aarch64-protos.h
	(aarch64_sve::handle_arm_sve_vector_bits_attribute): Declare.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_SVE_VECTOR_OPERATIONS when SVE is enabled.
	* config/aarch64/aarch64-sve-builtins.cc (matches_type_p): New
	function.
	(find_type_suffix_for_scalar_type): Use it instead of comparing
	TYPE_MAIN_VARIANTs.
	(function_resolver::infer_vector_or_tuple_type): Likewise.
	(function_resolver::require_vector_type): Likewise.
	(handle_arm_sve_vector_bits_attribute): New function.
	* config/aarch64/aarch64.c (pure_scalable_type_info): New class.
	(aarch64_attribute_table): Add arm_sve_vector_bits.
	(aarch64_return_in_memory_1):
	(pure_scalable_type_info::piece::get_rtx): New function.
	(pure_scalable_type_info::num_zr): Likewise.
	(pure_scalable_type_info::num_pr): Likewise.
	(pure_scalable_type_info::get_rtx): Likewise.
	(pure_scalable_type_info::analyze): Likewise.
	(pure_scalable_type_info::analyze_registers): Likewise.
	(pure_scalable_type_info::analyze_array): Likewise.
	(pure_scalable_type_info::analyze_record): Likewise.
	(pure_scalable_type_info::add_piece): Likewise.
	(aarch64_some_values_include_pst_objects_p): Likewise.
	(aarch64_returns_value_in_sve_regs_p): Use pure_scalable_type_info
	to analyze whether the type is returned in SVE registers.
	(aarch64_takes_arguments_in_sve_regs_p): Likwise whether the type
	is passed in SVE registers.
	(aarch64_pass_by_reference_1): New function, extracted from...
	(aarch64_pass_by_reference): ...here.  Use pure_scalable_type_info
	to analyze whether the type is a pure scalable type and, if so,
	whether it should be passed by reference.
	(aarch64_return_in_msb): Return false for pure scalable types.
	(aarch64_function_value_1): Fold back into...
	(aarch64_function_value): ...this function.  Use
	pure_scalable_type_info to analyze whether the type is a pure
	scalable type and, if so, which registers it should use.  Handle
	types that include pure scalable types but are not themselves
	pure scalable types.
	(aarch64_return_in_memory_1): New function, split out from...
	(aarch64_return_in_memory): ...here.  Use pure_scalable_type_info
	to analyze whether the type is a pure scalable type and, if so,
	whether it should be returned by reference.
	(aarch64_layout_arg): Remove orig_mode argument.  Use
	pure_scalable_type_info to analyze whether the type is a pure
	scalable type and, if so, which registers it should use.  Handle
	types that include pure scalable types but are not themselves
	pure scalable types.
	(aarch64_function_arg): Update call accordingly.
	(aarch64_function_arg_advance): Likewise.
	(aarch64_pad_reg_upward): On big-endian targets, return false for
	pure scalable types that are smaller than 16 bytes.
	(aarch64_member_type_forces_blk): New function.
	(aapcs_vfp_sub_candidate): Exit early for built-in SVE types.
	(aarch64_short_vector_p): Return false for VECTOR_TYPEs that
	correspond to built-in SVE types.  Do not rely on a vector mode
	if the type includes an pure scalable type.  When returning true,
	assert that the mode is not an SVE mode.
	(aarch64_vfp_is_call_or_return_candidate): Do not check for SVE
	built-in types here.  When returning true, assert that the type
	does not have an SVE mode.
	(aarch64_can_change_mode_class): Don't allow anything to change
	between a predicate mode and a non-predicate mode.  Also don't
	allow changes between SVE vector modes and other modes that
	might be bigger than 128 bits.
	(aarch64_invalid_binary_op): Reject binary operations that mix
	SVE and GNU vector types.
	(TARGET_MEMBER_TYPE_FORCES_BLK): Define.

2020-04-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_attribute_table): Add
	"SVE sizeless type".
	* config/aarch64/aarch64-sve-builtins.cc (make_type_sizeless)
	(sizeless_type_p): New functions.
	(register_builtin_types): Apply make_type_sizeless to the type.
	(register_tuple_type): Likewise.
	(verify_type_context): Use sizeless_type_p instead of builin_type_p.

2020-04-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/arm/arm_cde.h: Remove `extern "C"` when compiling for
	C++.

2020-04-09  Martin Jambor  <mjambor@suse.cz>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94482
	* tree-sra.c (create_access_replacement): Dump new replacement with
	TDF_UID.
	(sra_modify_expr): Fix handling of cases when the original EXPR writes
	to only part of the replacement.
	* tree-ssa-forwprop.c (pass_forwprop::execute): Properly verify
	the first operand of combinations into REAL/IMAGPART_EXPR and
	BIT_FIELD_REF.

2020-04-09  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (check-function-bodies): Treat the third
	parameter as a list of option regexps and require each regexp
	to match.

2020-04-09  Andrea Corallo  <andrea.corallo@arm.com>

	PR target/94530
	* config/aarch64/falkor-tag-collision-avoidance.c
	(valid_src_p): Fix missing rtx type check.

2020-04-09  Bin Cheng  <bin.cheng@linux.alibaba.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93674
	* tree-ssa-loop-ivopts.c (langhooks.h): New include.
	(add_iv_candidate_for_use): For iv_use of non integer or pointer type,
	or non-mode precision type, add candidate in unsigned type with the
	same precision.

2020-04-08  Clement Chigot  <clement.chigot@atos.net>

	* config/rs6000/aix61.h (LIB_SPEC): Add -lc128 with -mlong-double-128.
	* config/rs6000/aix71.h (LIB_SPEC): Likewise.
	* config/rs6000/aix72.h (LIB_SPEC): Likewise.

2020-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/94526
	* cselib.c (autoinc_split): Handle e->val_rtx being SP_DERIVED_VALUE_P
	with zero offset.
	* reload1.c (eliminate_regs_1): Avoid creating
	(plus (reg) (const_int 0)) in DEBUG_INSNs.

	PR tree-optimization/94524
	* tree-vect-generic.c (expand_vector_divmod): If any elt of op1 is
	negative for signed TRUNC_MOD_EXPR, multiply with absolute value of
	op1 rather than op1 itself at the end.  Punt for signed modulo by
	most negative constant.
	* tree-vect-patterns.c (vect_recog_divmod_pattern): Punt for signed
	modulo by most negative constant.

2020-04-08  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/93946
	* cse.c (cse_insn): Record the tabled expression in
	src_related.  Verify a redundant store removal is valid.

2020-04-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/94417
	* config/i386/i386-features.c (rest_of_insert_endbranch): Insert
	ENDBR at function entry if function will be called indirectly.

2020-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/94438
	* config/i386/i386.c (ix86_get_mask_mode): Only use int mask for elem_size
	1, 2, 4 and 8.

2020-04-08  Martin Liska  <mliska@suse.cz>

	PR c++/94314
	* gimple.c (gimple_call_operator_delete_p): Rename to...
	(gimple_call_replaceable_operator_delete_p): ... this.
	Use DECL_IS_REPLACEABLE_OPERATOR_DELETE_P.
	* gimple.h (gimple_call_operator_delete_p): Rename to ...
	(gimple_call_replaceable_operator_delete_p): ... this.
	* tree-core.h (tree_function_decl): Add replaceable_operator
	flag.
	* tree-ssa-dce.c (mark_all_reaching_defs_necessary_1):
	Use DECL_IS_REPLACEABLE_OPERATOR_DELETE_P.
	(propagate_necessity): Use gimple_call_replaceable_operator_delete_p.
	(eliminate_unnecessary_stmts): Likewise.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields):
	Pack DECL_IS_REPLACEABLE_OPERATOR.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields):
	Unpack the field here.
	* tree.h (DECL_IS_REPLACEABLE_OPERATOR): New.
	(DECL_IS_REPLACEABLE_OPERATOR_NEW_P): New.
	(DECL_IS_REPLACEABLE_OPERATOR_DELETE_P): New.
	* cgraph.c (cgraph_node::dump): Dump if an operator is replaceable.
	* ipa-icf.c (sem_item::compare_referenced_symbol_properties): Compare
	replaceable operator flags.

2020-04-08  Dennis Zhang  <dennis.zhang@arm.com>
	    Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/arm/arm-builtins.c (CX_IMM_QUALIFIERS): New macro.
	(CX_UNARY_QUALIFIERS, CX_BINARY_QUALIFIERS): Likewise.
	(CX_TERNARY_QUALIFIERS): Likewise.
	(ARM_BUILTIN_CDE_PATTERN_START): Likewise.
	(ARM_BUILTIN_CDE_PATTERN_END): Likewise.
	(arm_init_acle_builtins): Initialize CDE builtins.
	(arm_expand_acle_builtin): Check CDE constant operands.
	* config/arm/arm.h (ARM_CDE_CONST_COPROC): New macro to set the range
	of CDE constant operand.
	* config/arm/arm.c (arm_hard_regno_mode_ok): Support DImode for
	TARGET_VFP_BASE.
	(ARM_VCDE_CONST_1, ARM_VCDE_CONST_2, ARM_VCDE_CONST_3): Likewise.
	* config/arm/arm_cde.h (__arm_vcx1_u32): New macro of ACLE interface.
	(__arm_vcx1a_u32, __arm_vcx2_u32, __arm_vcx2a_u32): Likewise.
	(__arm_vcx3_u32, __arm_vcx3a_u32, __arm_vcx1d_u64): Likewise.
	(__arm_vcx1da_u64, __arm_vcx2d_u64, __arm_vcx2da_u64): Likewise.
	(__arm_vcx3d_u64, __arm_vcx3da_u64): Likewise.
	* config/arm/arm_cde_builtins.def: New file.
	* config/arm/iterators.md (V_reg): New attribute of SI.
	* config/arm/predicates.md (const_int_coproc_operand): New.
	(const_int_vcde1_operand, const_int_vcde2_operand): New.
	(const_int_vcde3_operand): New.
	* config/arm/unspecs.md (UNSPEC_VCDE, UNSPEC_VCDEA): New.
	* config/arm/vfp.md (arm_vcx1<mode>): New entry.
	(arm_vcx1a<mode>, arm_vcx2<mode>, arm_vcx2a<mode>): Likewise.
	(arm_vcx3<mode>, arm_vcx3a<mode>): Likewise.

2020-04-08  Dennis Zhang  <dennis.zhang@arm.com>

	* config.gcc: Add arm_cde.h.
	* config/arm/arm-c.c (arm_cpu_builtins): Define or undefine
	__ARM_FEATURE_CDE and __ARM_FEATURE_CDE_COPROC.
	* config/arm/arm-cpus.in (cdecp0, cdecp1, ..., cdecp7): New options.
	* config/arm/arm.c (arm_option_reconfigure_globals): Configure
	arm_arch_cde and arm_arch_cde_coproc to store the feature bits.
	* config/arm/arm.h (TARGET_CDE): New macro.
	* config/arm/arm_cde.h: New file.
	* doc/invoke.texi: Document CDE options +cdecp[0-7].
	* doc/sourcebuild.texi (arm_v8m_main_cde_ok): Document new target
	supports option.
	(arm_v8m_main_cde_fp, arm_v8_1m_main_cde_mve): Likewise.

2020-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94516
	* postreload.c: Include rtl-iter.h.
	(reload_cse_move2add): Handle SP autoinc here by FOR_EACH_SUBRTX_VAR
	looking for all MEMs with RTX_AUTOINC operand.
	(move2add_note_store): Remove {PRE,POST}_{INC,DEC} handling.

2020-04-08  Tobias Burnus  <tobias@codesourcery.com>

	* omp-grid.c (grid_eliminate_combined_simd_part): Use
	OMP_CLAUSE_CODE to access the omp clause code.

2020-04-07  Jeff Law  <law@redhat.com>

	PR rtl-optimization/92264
	* config/h8300/h8300.md (mov;add peephole2): Avoid applying when
	the destination is the stack pointer.

2020-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94291
	PR rtl-optimization/84169
	* combine.c (try_combine): For split_i2i3, don't assume SET_DEST
	must be a REG or SUBREG of REG; if it is not one of these, don't
	update LOG_LINKs.

2020-04-07  Richard Biener  <rguenther@suse.de>

	PR middle-end/94479
	* gimplify.c (gimplify_addr_expr): Also consider generated
	MEM_REFs.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Add C++ polymorphism and fix preserve MACROs.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Cast some pointers to expected types.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Replace all uses of vuninitializedq_* with the
	same with '__arm_' prefix.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/mve.md (mve_vec_extract*): Allow memory operands in set.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.c (arm_mve_immediate_check): Removed.
	* config/arm/mve.md (MVE_pred2, MVE_constraint2): Added FP types.
	(mve_vcvtq_n_to_f_*, mve_vcvtq_n_from_f_*, mve_vqshrnbq_n_*,
	 mve_vqshrntq_n_*, mve_vqshrunbq_n_s*, mve_vqshruntq_n_s*,
	 mve_vcvtq_m_n_from_f_*, mve_vcvtq_m_n_to_f_*, mve_vqshrnbq_m_n_*,
	 mve_vqrshruntq_m_n_s*, mve_vqshrunbq_m_n_s*,
	 mve_vqshruntq_m_n_s*): Fixed immediate constraints.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.d (ashldi3): Don't use lsll for constant 32-bit shifts.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Fix v[id]wdup intrinsics.
	* config/arm/mve/md: Fix v[id]wdup patterns.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.c (output_move_neon): Deal with label + offset cases.
	* config/arm/mve.md (*mve_mov<mode>): Handle const vectors.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Remove use of typeof for addr pointer parameters
	and remove const_ptr enums.

2020-04-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h (vsubq_n): Merge with...
	(vsubq): ... this.
	(vmulq_n): Merge with...
	(vmulq): ... this.
	(__ARM_mve_typeid): Simplify scalar and constant detection.

2020-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/94509
	* config/i386/i386-expand.c (expand_vec_perm_pshufb): Fix the check
	for inter-lane permutation for 64-byte modes.

	PR target/94488
	* config/aarch64/aarch64-simd.md (ashl<mode>3, lshr<mode>3,
	ashr<mode>3): Force operands[2] into reg whenever it is not CONST_INT.
	Assume it is a REG after that instead of testing it and doing FAIL
	otherwise.  Formatting fix.

2020-04-07  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/rs6000/t-rtems: Delete mcpu=8540 multilib.

2020-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/94500
	* config/i386/i386-expand.c (emit_reduc_half): For V{64QI,32HI}mode
	handle i < 64 using avx512bw_lshrv4ti3.  Formatting fixes.

2020-04-06  Jakub Jelinek  <jakub@redhat.com>

	* cselib.c (cselib_subst_to_values): For SP_DERIVED_VALUE_P
	+ const0_rtx return the SP_DERIVED_VALUE_P.

2020-04-06  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/92989
	* lra-lives.c (process_bb_lives): Do not treat eh_return data
	registers as being live at the beginning of the EH receiver.

2020-04-05 Zachary Spytz  <zspytz@gmail.com>

	* extend.texi: Add free to list of ISO C90 functions that
	are recognized by the compiler.

2020-04-05 Nagaraju Mekala <nmekala@xilix.com>

	* config/microblaze/microblaze.c (microblaze_must_save_register): Check
	for fast_interrupt.
 
	* config/microblaze/microblaze.md (trap): Update output pattern.

2020-04-04  Hannes Domani  <ssbssa@yahoo.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR debug/94459
	* dwarf2out.c (gen_subprogram_die): Look through references, pointers,
	arrays, pointer-to-members, function types and qualifiers when
	checking if in-class DIE had an 'auto' or 'decltype(auto)' return type
	to emit type again on definition.

2020-04-04  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/93940
	* ipa-fnsummary.c (vrp_will_run_p): New function.
	(fre_will_run_p): New function.
	(evaluate_properties_for_edge): Use it.
	* ipa-inline.c (can_inline_edge_by_limits_p): Do not inline
	!optimize_debug to optimize_debug.

2020-04-04  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94468
	* cselib.c (references_value_p): Formatting fix.
	(cselib_useless_value_p): New function.
	(discard_useless_locs, discard_useless_values,
	cselib_invalidate_regno_val, cselib_invalidate_mem,
	cselib_record_set): Use it instead of
	v->locs == 0 && !PRESERVED_VALUE_P (v->val_rtx).

	PR debug/94441
	* tree-iterator.h (expr_single): Declare.
	* tree-iterator.c (expr_single): New function.
	* tree.h (protected_set_expr_location_if_unset): Declare.
	* tree.c (protected_set_expr_location): Use expr_single.
	(protected_set_expr_location_if_unset): New function.

2020-04-03  Jeff Law  <law@redhat.com>

	PR rtl-optimization/92264
	* config/stormy16/stormy16.c (xstormy16_preferred_reload_class): Handle
	reloading of auto-increment addressing modes.

2020-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/94467
	* config/i386/sse.md (ssse3_pshufbv8qi3): Mark scratch operand
	as earlyclobber.

2020-04-03  Jeff Law  <law@redhat.com>

	PR rtl-optimization/92264
	* config/m32r/m32r.c (m32r_output_block_move): Properly account for
	post-increment addressing of source operands as well as residuals
	when computing any adjustments to the input pointer.

2020-04-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/94460
	* config/i386/sse.md (avx2_ph<plusminus_mnemonic>wv16hi3,
	avx2_ph<plusminus_mnemonic>dv8si3): Fix up RTL pattern to do
	second half of first lane from first lane of second operand and
	first half of second lane from second lane of first operand.

2020-04-03  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_mve.h: Condition the header file on __ARM_FEATURE_MVE.

2020-04-03  Tamar Christina  <tamar.christina@arm.com>

	PR target/94396
	* common/config/aarch64/aarch64-common.c
	(aarch64_get_extension_string_for_isa_flags): Handle default flags.

2020-04-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/94465
	* tree.c (array_ref_low_bound): Deal with released SSA names
	in index position.

2020-04-03  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (print_operand): Handle unordered comparison
	operators.
	* config/gcn/predicates.md (gcn_fp_compare_operator): Add unordered
	comparison operators.

2020-04-03  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/94443
	* tree-vect-loop.c (vectorizable_live_operation): Use
	gsi_insert_seq_before to replace gsi_insert_before.

2020-04-03  Martin Liska  <mliska@suse.cz>

	PR ipa/94445
	* ipa-icf-gimple.c (func_checker::compare_gimple_call):
	  Compare type attributes for gimple_call_fntypes.

2020-04-02  Sandra Loosemore  <sandra@codesourcery.com>

	* alias.c (get_alias_set): Fix comment typos.

2020-04-02  Fritz Reese  <foreese@gcc.gnu.org>

	PR fortran/85982
	* fortran/decl.c (match_attr_spec): Lump COMP_STRUCTURE/COMP_MAP into
	attribute checking used by TYPE.

2020-04-02  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92676
	* ipa-sra.c (struct caller_issues): New fields candidate and
	call_from_outside_comdat.
	(check_for_caller_issues): Check for calls from outsied of
	candidate's same_comdat_group.
	(check_all_callers_for_issues): Set up issues.candidate, check result
	of the new check.
	(mark_callers_calls_comdat_local): New function.
	(process_isra_node_results): Set calls_comdat_local of callers if
	appropriate.

2020-04-02  Richard Biener  <rguenther@suse.de>

	PR c/94392
	* common.opt (ffinite-loops): Initialize to zero.
	* opts.c (default_options_table): Remove OPT_ffinite_loops
	entry.
	* cfgloop.h (loop::finite_p): New member.
	* cfgloopmanip.c (copy_loop_info): Copy finite_p.
	* ipa-icf-gimple.c (func_checker::compare_loops): Compare
	finite_p.
	* lto-streamer-in.c (input_cfg): Stream finite_p.
	* lto-streamer-out.c (output_cfg): Likewise.
	* tree-cfg.c (replace_loop_annotate): Initialize finite_p
	from flag_finite_loops at CFG build time.
	* tree-ssa-loop-niter.c (finite_loop_p): Check the loops
	finite_p flag instead of flag_finite_loops.
	* doc/invoke.texi (ffinite-loops): Adjust documentation of
	default setting.

2020-04-02  Richard Biener  <rguenther@suse.de>

	PR debug/94450
	* dwarf2out.c (dwarf2out_early_finish): Remove code emitting
	DW_TAG_imported_unit.

2020-04-02  Maciej W. Rozycki  <macro@wdc.com>

	* doc/install.texi (Specific) <riscv32-*-elf, riscv32-*-linux>
	<riscv64-*-elf, riscv64-*-linux>: Update binutils requirement to
	2.30.

2020-04-02  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/94401
	* tree-vect-loop.c (vectorizable_load): Handle VMAT_CONTIGUOUS_REVERSE
	access type when loading halves of vector to avoid peeling for gaps.

2020-04-02  Jakub Jelinek  <jakub@redhat.com>

	* config/mips/mti-linux.h (SYSROOT_SUFFIX_SPEC): Add a space in
	between a string literal and MIPS_SYSVERSION_SPEC macro.

2020-04-02  Martin Jambor  <mjambor@suse.cz>

	* doc/invoke.texi (Optimize Options): Document sra-max-propagations.

2020-04-02  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/92264
	* params.opt (-param=max-find-base-term-values=): Decrease default
	from 2000 to 200.

	PR rtl-optimization/92264
	* rtl.h (struct rtx_def): Mention that call bit is used as
	SP_DERIVED_VALUE_P in cselib.c.
	* cselib.c (SP_DERIVED_VALUE_P): Define.
	(PRESERVED_VALUE_P, SP_BASED_VALUE_P): Move definitions earlier.
	(cselib_hasher::equal): Handle equality between SP_DERIVED_VALUE_P
	val_rtx and sp based expression where offsets cancel each other.
	(preserve_constants_and_equivs): Formatting fix.
	(cselib_reset_table): Add reverse op loc to SP_DERIVED_VALUE_P
	locs list for cfa_base_preserved_val if needed.  Formatting fix.
	(autoinc_split): If the to be returned value is a REG, MEM or
	VALUE which has SP_DERIVED_VALUE_P + CONST_INT as one of its
	locs, return the SP_DERIVED_VALUE_P VALUE and adjust *off.
	(rtx_equal_for_cselib_1): Call autoinc_split even if both
	expressions are PLUS in Pmode with CONST_INT second operands.
	Handle SP_DERIVED_VALUE_P cases.
	(cselib_hash_plus_const_int): New function.
	(cselib_hash_rtx): Use it for PLUS in Pmode with CONST_INT
	second operand, as well as for PRE_DEC etc. that ought to be
	hashed the same way.
	(cselib_subst_to_values): Substitute PLUS with Pmode and
	CONST_INT operand if the first operand is a VALUE which has
	SP_DERIVED_VALUE_P + CONST_INT as one of its locs for the
	SP_DERIVED_VALUE_P + adjusted offset.
	(cselib_lookup_1): When creating a new VALUE for stack_pointer_rtx,
	set SP_DERIVED_VALUE_P on it.  Set PRESERVED_VALUE_P when adding
	SP_DERIVED_VALUE_P PRESERVED_VALUE_P subseted VALUE location.
	* var-tracking.c (vt_initialize): Call cselib_add_permanent_equiv
	on the sp value before calling cselib_add_permanent_equiv on the
	cfa_base value.
	* dse.c (check_for_inc_dec_1, check_for_inc_dec): Punt on RTX_AUTOINC
	in the insn without REG_INC note.
	(replace_read): Punt on RTX_AUTOINC in the *loc being replaced.
	Punt on invalid insns added by copy_to_mode_reg.  Formatting fixes.

	PR target/94435
	* config/aarch64/aarch64.c (aarch64_gen_compare_reg_maybe_ze): For
	y_mode E_[QH]Imode and y being a CONST_INT, change y_mode to SImode.

2020-04-02  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	PR target/94317
	* config/arm/arm-builtins.c (LDRGBWBXU_QUALIFIERS): Define.
	(LDRGBWBXU_Z_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (__arm_vldrdq_gather_base_wb_s64): Modify
	intrinsic defintion by adding a new builtin call to writeback into base
	address.
	(__arm_vldrdq_gather_base_wb_u64): Likewise.
	(__arm_vldrdq_gather_base_wb_z_s64): Likewise.
	(__arm_vldrdq_gather_base_wb_z_u64): Likewise.
	(__arm_vldrwq_gather_base_wb_s32): Likewise.
	(__arm_vldrwq_gather_base_wb_u32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_s32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_u32): Likewise.
	(__arm_vldrwq_gather_base_wb_f32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_f32): Likewise.
	* config/arm/arm_mve_builtins.def (vldrwq_gather_base_wb_z_u): Modify
	builtin's qualifier.
	(vldrdq_gather_base_wb_z_u): Likewise.
	(vldrwq_gather_base_wb_u): Likewise.
	(vldrdq_gather_base_wb_u): Likewise.
	(vldrwq_gather_base_wb_z_s): Likewise.
	(vldrwq_gather_base_wb_z_f): Likewise.
	(vldrdq_gather_base_wb_z_s): Likewise.
	(vldrwq_gather_base_wb_s): Likewise.
	(vldrwq_gather_base_wb_f): Likewise.
	(vldrdq_gather_base_wb_s): Likewise.
	(vldrwq_gather_base_nowb_z_u): Define builtin.
	(vldrdq_gather_base_nowb_z_u): Likewise.
	(vldrwq_gather_base_nowb_u): Likewise.
	(vldrdq_gather_base_nowb_u): Likewise.
	(vldrwq_gather_base_nowb_z_s): Likewise.
	(vldrwq_gather_base_nowb_z_f): Likewise.
	(vldrdq_gather_base_nowb_z_s): Likewise.
	(vldrwq_gather_base_nowb_s): Likewise.
	(vldrwq_gather_base_nowb_f): Likewise.
	(vldrdq_gather_base_nowb_s): Likewise.
	* config/arm/mve.md (mve_vldrwq_gather_base_nowb_<supf>v4si): Define RTL
	pattern.
	(mve_vldrwq_gather_base_wb_<supf>v4si): Modify RTL pattern.
	(mve_vldrwq_gather_base_nowb_z_<supf>v4si): Define RTL pattern.
	(mve_vldrwq_gather_base_wb_z_<supf>v4si): Modify RTL pattern.
	(mve_vldrwq_gather_base_wb_fv4sf): Modify RTL pattern.
	(mve_vldrwq_gather_base_nowb_fv4sf): Define RTL pattern.
	(mve_vldrwq_gather_base_wb_z_fv4sf): Modify RTL pattern.
	(mve_vldrwq_gather_base_nowb_z_fv4sf): Define RTL pattern.
	(mve_vldrdq_gather_base_nowb_<supf>v4di): Define RTL pattern.
	(mve_vldrdq_gather_base_wb_<supf>v4di):  Modify RTL pattern.
	(mve_vldrdq_gather_base_nowb_z_<supf>v4di): Define RTL pattern.
	(mve_vldrdq_gather_base_wb_z_<supf>v4di):  Modify RTL pattern.

2020-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md ("<ti*>add<mode>3", "mul<mode>3")
	("and<mode>3", "notand<mode>3", "ior<mode>3", "ior_not<mode>3")
	("xor<mode>3", "notxor<mode>3", "smin<mode>3", "smax<mode>3")
	("umin<mode>3", "umax<mode>3", "vec_widen_smult_even_<mode>")
	("vec_widen_umult_even_<mode>", "vec_widen_smult_odd_<mode>")
	("vec_widen_umult_odd_<mode>", "add<mode>3", "sub<mode>3")
	("mul<mode>3", "fma<mode>4", "fms<mode>4", "neg_fma<mode>4")
	("neg_fms<mode>4", "*smax<mode>3_vxe", "*smaxv2df3_vx")
	("*smin<mode>3_vxe", "*sminv2df3_vx"): Remove % constraint
	modifier.
	("vec_widen_umult_lo_<mode>", "vec_widen_umult_hi_<mode>")
	("vec_widen_smult_lo_<mode>", "vec_widen_smult_hi_<mode>"):
	Remove constraints from expander.
	* config/s390/vx-builtins.md ("vacc<bhfgq>_<mode>", "vacq")
	("vacccq", "vec_avg<mode>", "vec_avgu<mode>", "vec_vmal<mode>")
	("vec_vmah<mode>", "vec_vmalh<mode>", "vec_vmae<mode>")
	("vec_vmale<mode>", "vec_vmao<mode>", "vec_vmalo<mode>")
	("vec_smulh<mode>", "vec_umulh<mode>", "vec_nor<mode>3")
	("vfmin<mode>", "vfmax<mode>"): Remove % constraint modifier.

2020-04-01  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/94123
	* lower-subreg.c (pass_lower_subreg3::gate): Remove test for
	flag_split_wide_types_early.

2020-04-01  Joerg Sonnenberger  <joerg@bec.de>

	* doc/extend.texi (Common Function Attributes): Fix typo.

2020-04-01  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/94420
	* config/rs6000/rs6000.md (*tocref<mode> for P): Add insn condition
	on operands[1].

2020-04-01  Zackery Spytz  <zspytz@gmail.com>

	* doc/extend.texi: Fix a typo in the documentation of the
	copy function attribute.

2020-04-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/94423
	* tree-object-size.c (pass_object_sizes::execute): Don't call
	replace_uses_by for SSA_NAME_OCCURS_IN_ABNORMAL_PHI lhs, instead
	call replace_call_with_value.

2020-04-01  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/94043
	* tree-vect-loop.c (vectorizable_live_operation): Generate loop-closed
	phi for vec_lhs and use it for lane extraction.

2020-03-31  Felix Yang  <felix.yang@huawei.com>

	PR tree-optimization/94398
	* tree-vect-stmts.c (vectorizable_store): Instead of calling
	vect_supportable_dr_alignment, set alignment_support_scheme to
	dr_unaligned_supported for gather-scatter accesses.
	(vectorizable_load): Likewise.

2020-03-31  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (V_QI, V_HI, V_HF, V_SI, V_SF, V_DI, V_DF):
	New mode iterators.
	(vnsi, VnSI, vndi, VnDI): New mode attributes.
	(mov<mode>): Use <VnDI> in place of V64DI.
	(mov<mode>_exec): Likewise.
	(mov<mode>_sgprbase): Likewise.
	(reload_out<mode>): Likewise.
	(*vec_set<mode>_1): Use GET_MODE_NUNITS instead of constant 64.
	(gather_load<mode>v64si): Rename to ...
	(gather_load<mode><vnsi>): ... this, and use <VnSI> in place of V64SI,
	and <VnDI> in place of V64DI.
	(gather<mode>_insn_1offset<exec>): Use <VnDI> in place of V64DI.
	(gather<mode>_insn_1offset_ds<exec>): Use <VnSI> in place of V64SI.
	(gather<mode>_insn_2offsets<exec>): Use <VnSI> and <VnDI>.
	(scatter_store<mode>v64si): Rename to ...
	(scatter_store<mode><vnsi>): ... this, and use <VnSI> and <VnDI>.
	(scatter<mode>_expr<exec_scatter>): Use <VnSI> and <VnDI>.
	(scatter<mode>_insn_1offset<exec_scatter>): Likewise.
	(scatter<mode>_insn_1offset_ds<exec_scatter>): Likewise.
	(scatter<mode>_insn_2offsets<exec_scatter>): Likewise.
	(ds_bpermute<mode>): Use <VnSI>.
	(addv64si3_vcc<exec_vcc>): Rename to ...
	(add<mode>3_vcc<exec_vcc>): ... this, and use V_SI.
	(addv64si3_vcc_dup<exec_vcc>): Rename to ...
	(add<mode>3_vcc_dup<exec_vcc>): ... this, and use V_SI.
	(addcv64si3<exec_vcc>): Rename to ...
	(addc<mode>3<exec_vcc>): ... this, and use V_SI.
	(subv64si3_vcc<exec_vcc>): Rename to ...
	(sub<mode>3_vcc<exec_vcc>): ... this, and use V_SI.
	(subcv64si3<exec_vcc>): Rename to ...
	(subc<mode>3<exec_vcc>): ... this, and use V_SI.
	(addv64di3): Rename to ...
	(add<mode>3): ... this, and use V_DI.
	(addv64di3_exec): Rename to ...
	(add<mode>3_exec): ... this, and use V_DI.
	(subv64di3): Rename to ...
	(sub<mode>3): ... this, and use V_DI.
	(subv64di3_exec): Rename to ...
	(sub<mode>3_exec): ... this, and use V_DI.
	(addv64di3_zext): Rename to ...
	(add<mode>3_zext): ... this, and use V_DI and <VnSI>.
	(addv64di3_zext_exec): Rename to ...
	(add<mode>3_zext_exec): ... this, and use V_DI and <VnSI>.
	(addv64di3_zext_dup): Rename to ...
	(add<mode>3_zext_dup): ... this, and use V_DI and <VnSI>.
	(addv64di3_zext_dup_exec): Rename to ...
	(add<mode>3_zext_dup_exec): ... this, and use V_DI and <VnSI>.
	(addv64di3_zext_dup2): Rename to ...
	(add<mode>3_zext_dup2): ... this, and use V_DI and <VnSI>.
	(addv64di3_zext_dup2_exec): Rename to ...
	(add<mode>3_zext_dup2_exec): ... this, and use V_DI and <VnSI>.
	(addv64di3_sext_dup2): Rename to ...
	(add<mode>3_sext_dup2): ... this, and use V_DI and <VnSI>.
	(addv64di3_sext_dup2_exec): Rename to ...
	(add<mode>3_sext_dup2_exec): ... this, and use V_DI and <VnSI>.
	(<su>mulv64si3_highpart<exec>): Rename to ...
	(<su>mul<mode>3_highpart<exec>): ... this and use V_SI and <VnDI>.
	(mulv64di3): Rename to ...
	(mul<mode>3): ... this, and use V_DI and <VnSI>.
	(mulv64di3_exec): Rename to ...
	(mul<mode>3_exec): ... this, and use V_DI and <VnSI>.
	(mulv64di3_zext): Rename to ...
	(mul<mode>3_zext): ... this, and use V_DI and <VnSI>.
	(mulv64di3_zext_exec): Rename to ...
	(mul<mode>3_zext_exec): ... this, and use V_DI and <VnSI>.
	(mulv64di3_zext_dup2): Rename to ...
	(mul<mode>3_zext_dup2): ... this, and use V_DI and <VnSI>.
	(mulv64di3_zext_dup2_exec): Rename to ...
	(mul<mode>3_zext_dup2_exec): ... this, and use V_DI and <VnSI>.
	(<expander>v64di3): Rename to ...
	(<expander><mode>3): ... this, and use V_DI and <VnSI>.
	(<expander>v64di3_exec): Rename to ...
	(<expander><mode>3_exec): ... this, and use V_DI and <VnSI>.
	(<expander>v64si3<exec>): Rename to ...
	(<expander><mode>3<exec>): ... this, and use V_SI and <VnSI>.
	(v<expander>v64si3<exec>): Rename to ...
	(v<expander><mode>3<exec>): ... this, and use V_SI and <VnSI>.
	(<expander>v64si3<exec>): Rename to ...
	(<expander><vnsi>3<exec>): ... this, and use V_SI.
	(subv64df3<exec>): Rename to ...
	(sub<mode>3<exec>): ... this, and use V_DF.
	(truncv64di<mode>2): Rename to ...
	(trunc<vndi><mode>2): ... this, and use <VnDI>.
	(truncv64di<mode>2_exec): Rename to ...
	(trunc<vndi><mode>2_exec): ... this, and use <VnDI>.
	(<convop><mode>v64di2): Rename to ...
	(<convop><mode><vndi>2): ... this, and use <VnDI>.
	(<convop><mode>v64di2_exec): Rename to ...
	(<convop><mode><vndi>2_exec): ... this, and use <VnDI>.
	(vec_cmp<u>v64qidi): Rename to ...
	(vec_cmp<u><mode>di): ... this, and use <VnSI>.
	(vec_cmp<u>v64qidi_exec): Rename to ...
	(vec_cmp<u><mode>di_exec): ... this, and use <VnSI>.
	(vcond_mask_<mode>di): Use <VnDI>.
	(maskload<mode>di): Likewise.
	(maskstore<mode>di): Likewise.
	(mask_gather_load<mode>v64si): Rename to ...
	(mask_gather_load<mode><vnsi>): ... this, and use <VnSI> and <VnDI>.
	(mask_scatter_store<mode>v64si): Rename to ...
	(mask_scatter_store<mode><vnsi>): ... this, and use <VnSI> and <VnDI>.
	(*<reduc_op>_dpp_shr_v64di): Rename to ...
	(*<reduc_op>_dpp_shr_<mode>): ... this, and use V_DI and <VnSI>.
	(*plus_carry_in_dpp_shr_v64si): Rename to ...
	(*plus_carry_in_dpp_shr_<mode>): ... this, and use V_SI.
	(*plus_carry_dpp_shr_v64di): Rename to ...
	(*plus_carry_dpp_shr_<mode>): ... this, and use V_DI and <VnSI>.
	(vec_seriesv64si): Rename to ...
	(vec_series<mode>): ... this, and use V_SI.
	(vec_seriesv64di): Rename to ...
	(vec_series<mode>): ... this, and use V_DI.

2020-03-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_print_operand): Use
	HOST_WIDE_INT_PRINT_DEC macro.

2020-03-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.h (ASM_FORMAT_PRIVATE_NAME): Fix it.

2020-03-31  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vbicq): Define MVE intrinsic polymorphic
	variant.
	(__arm_vbicq): Likewise.

2020-03-31  Vineet Gupta <vgupta@synopsys.com>

	* config/arc/linux.h: GLIBC_DYNAMIC_LINKER support BE/arc700.

2020-03-31  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vaddlvq): Move the polymorphic variant to the
	common section of both MVE Integer and MVE Floating Point.
	(vaddvq): Likewise.
	(vaddlvq_p): Likewise.
	(vaddvaq): Likewise.
	(vaddvq_p): Likewise.
	(vcmpcsq): Likewise.
	(vmlsdavxq): Likewise.
	(vmlsdavq): Likewise.
	(vmladavxq): Likewise.
	(vmladavq): Likewise.
	(vminvq): Likewise.
	(vminavq): Likewise.
	(vmaxvq): Likewise.
	(vmaxavq): Likewise.
	(vmlaldavq): Likewise.
	(vcmphiq): Likewise.
	(vaddlvaq): Likewise.
	(vrmlaldavhq): Likewise.
	(vrmlaldavhxq): Likewise.
	(vrmlsldavhq): Likewise.
	(vrmlsldavhxq): Likewise.
	(vmlsldavxq): Likewise.
	(vmlsldavq): Likewise.
	(vabavq): Likewise.
	(vrmlaldavhaq): Likewise.
	(vcmpgeq_m_n): Likewise.
	(vmlsdavxq_p): Likewise.
	(vmlsdavq_p): Likewise.
	(vmlsdavaxq): Likewise.
	(vmlsdavaq): Likewise.
	(vaddvaq_p): Likewise.
	(vcmpcsq_m_n): Likewise.
	(vcmpcsq_m): Likewise.
	(vmladavxq_p): Likewise.
	(vmladavq_p): Likewise.
	(vmladavaxq): Likewise.
	(vmladavaq): Likewise.
	(vminvq_p): Likewise.
	(vminavq_p): Likewise.
	(vmaxvq_p): Likewise.
	(vmaxavq_p): Likewise.
	(vcmphiq_m): Likewise.
	(vaddlvaq_p): Likewise.
	(vmlaldavaq): Likewise.
	(vmlaldavaxq): Likewise.
	(vmlaldavq_p): Likewise.
	(vmlaldavxq_p): Likewise.
	(vmlsldavaq): Likewise.
	(vmlsldavaxq): Likewise.
	(vmlsldavq_p): Likewise.
	(vmlsldavxq_p): Likewise.
	(vrmlaldavhaxq): Likewise.
	(vrmlaldavhq_p): Likewise.
	(vrmlaldavhxq_p): Likewise.
	(vrmlsldavhaq): Likewise.
	(vrmlsldavhaxq): Likewise.
	(vrmlsldavhq_p): Likewise.
	(vrmlsldavhxq_p): Likewise.
	(vabavq_p): Likewise.
	(vmladavaq_p): Likewise.
	(vstrbq_scatter_offset): Likewise.
	(vstrbq_p): Likewise.
	(vstrbq_scatter_offset_p): Likewise.
	(vstrdq_scatter_base_p): Likewise.
	(vstrdq_scatter_base): Likewise.
	(vstrdq_scatter_offset_p): Likewise.
	(vstrdq_scatter_offset): Likewise.
	(vstrdq_scatter_shifted_offset_p): Likewise.
	(vstrdq_scatter_shifted_offset): Likewise.
	(vmaxq_x): Likewise.
	(vminq_x): Likewise.
	(vmovlbq_x): Likewise.
	(vmovltq_x): Likewise.
	(vmulhq_x): Likewise.
	(vmullbq_int_x): Likewise.
	(vmullbq_poly_x): Likewise.
	(vmulltq_int_x): Likewise.
	(vmulltq_poly_x): Likewise.
	(vstrbq): Likewise.

2020-03-31  Jakub Jelinek  <jakub@redhat.com>

	PR target/94368
	* config/aarch64/constraints.md (Uph): New constraint.
	* config/aarch64/atomics.md (cas_short_expected_imm): New mode attr.
	(@aarch64_compare_and_swap<mode>): Use it instead of n in operand 2's
	constraint.

2020-03-31  Marc Glisse  <marc.glisse@inria.fr>
	    Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/94412
	* fold-const.c (fold_binary_loc) <case TRUNC_DIV_EXPR>: Use
	ANY_INTEGRAL_TYPE_P instead of INTEGRAL_TYPE_P.

2020-03-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94403
	* gimple-ssa-store-merging.c (verify_symbolic_number_p): Allow also
	ENUMERAL_TYPE lhs_type.

	PR rtl-optimization/94344
	* tree-ssa-forwprop.c (simplify_rotate): Handle also same precision
	conversions, either on both operands of |^+ or just one.  Handle
	also extra same precision conversion on RSHIFT_EXPR first operand
	provided RSHIFT_EXPR is performed in unsigned type.

2020-03-30  David Malcolm  <dmalcolm@redhat.com>

	* lra.c (finish_insn_code_data_once): Set the array elements
	to NULL after freeing them.

2020-03-30  Andreas Schwab  <schwab@suse.de>

	* config/host-linux.c (TRY_EMPTY_VM_SPACE) [__riscv && __LP64__]:
	Define.

2020-03-30  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000-call.c altivec_init_builtins(): Remove code
	to skip defining builtins based on builtin_mask.

2020-03-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/94343
	* config/i386/sse.md (<mask_codefor>one_cmpl<mode>2<mask_name>): If
	!TARGET_AVX512VL, use 512-bit vpternlog and make sure the input
	operand is a register.  Don't enable masked variants for V*[QH]Imode.

	PR target/93069
	* config/i386/sse.md (vec_extract_lo_<mode><mask_name>): Use
	<store_mask_constraint> instead of m in output operand constraint.
	(vec_extract_hi_<mode><mask_name>): Use <mask_operand2> instead of
	%{%3%}.

2020-03-30  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_call_aix): Emit cookie to pattern.
	(rs6000_indirect_call_template_1): Adjust to suit.
	* config/rs6000/rs6000.md (call_local): Merge call_local32,
	call_local64, and call_local_aix.
	(call_value_local): Simlarly.
	(call_nonlocal_aix, call_value_nonlocal_aix): Adjust rtl to suit,
	and disable pattern when CALL_LONG.
	(call_indirect_aix, call_value_indirect_aix): Adjust rtl.
	(call_indirect_elfv2, call_indirect_pcrel): Likewise.
	(call_value_indirect_elfv2, call_value_indirect_pcrel): Likewise.

2020-03-29  H.J. Lu  <hongjiu.lu@intel.com>

	PR driver/94381
	* doc/invoke.texi: Update -falign-functions, -falign-loops and
	-falign-jumps documentation.

2020-03-29  Martin Liska  <mliska@suse.cz>

	PR ipa/94363
	* cgraphunit.c (process_function_and_variable_attributes): Remove
	double 'attribute' words.

2020-03-29  John David Anglin  <dave.anglin@bell.net>

	* config/pa/pa.c (pa_asm_output_aligned_bss): Delete duplicate
	.align output.

2020-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR c/93573
	* c-decl.c (grokdeclarator): After issuing errors, set size_int_const
	to true after setting size to integer_one_node.

	PR tree-optimization/94329
	* tree-ssa-reassoc.c (reassociate_bb): When calling reassoc_remove_stmt
	on the last stmt in a bb, make sure gsi_prev isn't done immediately
	after gsi_last_bb.

2020-03-27  Alan Modra  <amodra@gmail.com>

	PR target/94145
	* config/rs6000/rs6000.c (rs6000_longcall_ref): Use unspec_volatile
	for PLT16_LO and PLT_PCREL.
	* config/rs6000/rs6000.md (UNSPEC_PLT16_LO, UNSPEC_PLT_PCREL): Remove.
	(UNSPECV_PLT16_LO, UNSPECV_PLT_PCREL): Define.
	(pltseq_plt16_lo_, pltseq_plt_pcrel): Use unspec_volatile.

2020-03-27  Martin Sebor  <msebor@redhat.com>

	PR c++/94098
	* calls.c (init_attr_rdwr_indices): Iterate over all access attributes.

2020-03-27  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md:
	(VEC_SUBDWORD_MODE): Rename to V_QIHI throughout.
	(VEC_1REG_MODE): Delete.
	(VEC_1REG_ALT): Delete.
	(VEC_ALL1REG_MODE): Rename to V_1REG throughout.
	(VEC_1REG_INT_MODE): Delete.
	(VEC_ALL1REG_INT_MODE): Rename to V_INT_1REG throughout.
	(VEC_ALL1REG_INT_ALT): Rename to V_INT_1REG_ALT throughout.
	(VEC_2REG_MODE): Rename to V_2REG throughout.
	(VEC_REG_MODE): Rename to V_noHI throughout.
	(VEC_ALLREG_MODE): Rename to V_ALL throughout.
	(VEC_ALLREG_ALT):  Rename to V_ALL_ALT throughout.
	(VEC_ALLREG_INT_MODE): Rename to V_INT throughout.
	(VEC_INT_MODE): Delete.
	(VEC_FP_MODE): Rename to V_FP throughout and move to top.
	(VEC_FP_1REG_MODE): Rename to V_FP_1REG throughout and move to top.
	(FP_MODE): Delete and replace with FP throughout.
	(FP_1REG_MODE): Delete and replace with FP_1REG throughout.
	(VCMP_MODE): Rename to V_noQI throughout and move to top.
	(VCMP_MODE_INT): Rename to V_INT_noQI throughout and move to top.
	* config/gcn/gcn.md (FP): New mode iterator.
	(FP_1REG): New mode iterator.

2020-03-27  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fdump-analyzer-supergraph): Document that this
	now emits two .dot files.
	* graphviz.cc (graphviz_out::begin_tr): Only emit a TR, not a TD.
	(graphviz_out::end_tr): Only close a TR, not a TD.
	(graphviz_out::begin_td): New.
	(graphviz_out::end_td): New.
	(graphviz_out::begin_trtd): New, replacing the old implementation
	of graphviz_out::begin_tr.
	(graphviz_out::end_tdtr): New, replacing the old implementation
	of graphviz_out::end_tr.
	* graphviz.h (graphviz_out::begin_td): New decl.
	(graphviz_out::end_td): New decl.
	(graphviz_out::begin_trtd): New decl.
	(graphviz_out::end_tdtr): New decl.

2020-03-27  Richard Biener  <rguenther@suse.de>

	PR debug/94273
	* dwarf2out.c (should_emit_struct_debug): Return false for
	DINFO_LEVEL_TERSE.

2020-03-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94352
	* tree-ssa-propagate.c (ssa_prop_init): Move seeding of the
	worklist ...
	(ssa_propagation_engine::ssa_propagate): ... here after
	initializing curr_order.

2020-03-27  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/90332
	* tree-vect-stmts.c (vector_vector_composition_type): New function.
	(get_group_load_store_type): Adjust to call
	vector_vector_composition_type, extend it to construct with scalar
	types.
	(vectorizable_load): Likewise.

2020-03-27  Roman Zhuykov  <zhroma@ispras.ru>

	* ddg.c (create_ddg_dep_from_intra_loop_link): Remove assertions.
	(create_ddg_dep_no_link): Likewise.
	(add_cross_iteration_register_deps): Move debug instruction check.
	Other minor refactoring.
	(add_intra_loop_mem_dep): Do not check for debug instructions.
	(add_inter_loop_mem_dep): Likewise.
	(build_intra_loop_deps): Likewise.
	(create_ddg): Do not include debug insns into the graph.
	* ddg.h (struct ddg): Remove num_debug field.
	* modulo-sched.c (doloop_register_get): Adjust condition.
	(res_MII): Remove DDG num_debug field usage.
	(sms_schedule_by_order): Use assertion against debug insns.
	(ps_has_conflicts): Drop debug insn check.

2020-03-26  Jakub Jelinek  <jakub@redhat.com>

	PR debug/94323
	* tree.c (protected_set_expr_location): Recurse on STATEMENT_LIST
	that contains exactly one non-DEBUG_BEGIN_STMT statement.

	PR debug/94281
	* gimple.h (gimple_seq_first_nondebug_stmt): New function.
	(gimple_seq_last_nondebug_stmt): Don't return NULL if seq contains
	a single non-debug stmt followed by one or more debug stmts.
	* gimplify.c (gimplify_body): Use gimple_seq_first_nondebug_stmt
	instead of gimple_seq_first_stmt, use gimple_seq_first_nondebug_stmt
	and gimple_seq_last_nondebug_stmt instead of gimple_seq_first and
	gimple_seq_last to check if outer_stmt gbind could be reused and
	if yes and it is surrounded by any debug stmts, move them into the
	gbind body.

	PR rtl-optimization/92264
	* var-tracking.c (add_stores): Call cselib_set_value_sp_based even
	for sp based values in !frame_pointer_needed
	&& !ACCUMULATE_OUTGOING_ARGS functions.

2020-03-26  Felix Yang  <felix.yang@huawei.com>

	PR tree-optimization/94269
	* tree-ssa-math-opts.c (convert_plusminus_to_widen): Restrict
	this
	operation to single basic block.

2020-03-25  Jeff Law  <law@redhat.com>

	PR rtl-optimization/90275
	* config/sh/sh.md (mov_neg_si_t): Clobber the T register in the
	pattern.

2020-03-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/94292
	* config/arm/arm.c (arm_gen_dicompare_reg): Set mode of COMPARE to
	mode rather than VOIDmode.

2020-03-25  Martin Sebor  <msebor@redhat.com>

	PR middle-end/94004
	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Issue warnings
	even for alloca calls resulting from system macro expansion.
	Include inlining context in all warnings.

2020-03-25  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/94254
	* config/rs6000/rs6000.c (rs6000_can_change_mode_class): Allow
	FPRs to change between SDmode and DDmode.

2020-03-25  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/94131
	* gimple-fold.c (get_range_strlen_tree): Fail for variable-length
	types and decls.
	* tree-ssa-strlen.c (get_range_strlen_dynamic): Avoid assuming
	types have constant sizes.

2020-03-25  Martin Liska  <mliska@suse.cz>

	PR lto/94259
	* configure.ac: Report error only when --with-zstd
	is used.
	* configure: Regenerate.

2020-03-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/94308
	* config/i386/i386-features.c (ix86_add_reg_usage_to_vzeroupper): Set
	INSN_CODE (insn) to -1 when changing the pattern.

2020-03-25  Martin Liska  <mliska@suse.cz>

	PR target/93274
	PR ipa/94271
	* config/i386/i386-features.c (make_resolver_func): Drop
	public flag for resolver.
	* config/rs6000/rs6000.c (make_resolver_func): Add comdat
	group for resolver and drop public flag if possible.
	* multiple_target.c (create_dispatcher_calls): Drop unique_name
	and resolution as we want to enable LTO privatization of the default
	symbol.

2020-03-25  Martin Liska  <mliska@suse.cz>

	PR lto/94259
	* configure.ac: Respect --without-zstd and report
	error when we can't find header file with --with-zstd.
	* configure: Regenerate.

2020-03-25  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/94303
	* varasm.c (output_constructor_array_range): If local->index
	RANGE_EXPR doesn't start at the current location in the constructor,
	skip needed number of bytes using assemble_zeros or assert we don't
	go backwards.

	PR c++/94223
	* langhooks.c (lhd_set_decl_assembler_name): Use a static ulong
	counter instead of DECL_UID.

	PR tree-optimization/94300
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): If pd.offset
	is positive, make sure that off + size isn't larger than needed_len.

2020-03-25  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR debug/94283
	* tree-if-conv.c (ifcvt_local_dce): Delete dead statements backwards.

2020-03-24  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (ARM-specific attributes): Add
	arm_fp_dp_ok.
	(Features for dg-add-options): Add arm_fp_dp.

2020-03-24  John David Anglin  <danglin@gcc.gnu.org>

	PR lto/94249
	* config/pa/pa.h (TARGET_CPU_CPP_BUILTINS): Define __BIG_ENDIAN__.

2020-03-24  Tobias Burnus  <tobias@codesourcery.com>

	PR libgomp/81689
	* omp-offload.c (omp_finish_file): Fix target-link handling if
	targetm_common.have_named_sections is false.

2020-03-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/94286
	* config/arm/arm.md (subvdi4, usubvsi4, usubvdi4): Use gen_int_mode
	instead of GEN_INT.

	PR debug/94285
	* tree-ssa-loop-manip.c (create_iv): If after, set stmt location to
	e->goto_locus even if gsi_bb (*incr_pos) contains only debug stmts.
	If not after and at *incr_pos is a debug stmt, set stmt location to
	location of next non-debug stmt after it if any.

	PR debug/94283
	* tree-if-conv.c (ifcvt_local_dce): For gimple debug stmts, just set
	GF_PLF_2, but don't add them to worklist.  Don't add an assigment to
	worklist or set GF_PLF_2 just because it is used in a debug stmt in
	another bb.  Formatting improvements.

	PR debug/94277
	* cgraphunit.c (check_global_declaration): For DECL_EXTERNAL and
	non-TREE_PUBLIC non-DECL_ARTIFICIAL FUNCTION_DECLs, set TREE_PUBLIC
	regardless of whether TREE_NO_WARNING is set on it or whether
	warn_unused_function is true or not.

2020-03-23  Jeff Law  <law@redhat.com>

	PR rtl-optimization/90275
	PR target/94238
	PR target/94144
	* simplify-rtx.c (comparison_code_valid_for_mode): New function.
	(simplify_logical_relational_operation): Use it.

2020-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR c++/91993
	* tree.c (get_narrower): Handle COMPOUND_EXPR by recursing on
	ultimate rhs and if returned something different, reconstructing
	the COMPOUND_EXPRs.

2020-03-23  Lewis Hyatt  <lhyatt@gmail.com>

	* opts.c (print_filtered_help): Improve the help text for alias options.

2020-03-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm_mve.h (vshlcq_m_s8): Define macro.
	(vshlcq_m_u8): Likewise.
	(vshlcq_m_s16): Likewise.
	(vshlcq_m_u16): Likewise.
	(vshlcq_m_s32): Likewise.
	(vshlcq_m_u32): Likewise.
	(__arm_vshlcq_m_s8): Define intrinsic.
	(__arm_vshlcq_m_u8): Likewise.
	(__arm_vshlcq_m_s16): Likewise.
	(__arm_vshlcq_m_u16): Likewise.
	(__arm_vshlcq_m_s32): Likewise.
	(__arm_vshlcq_m_u32): Likewise.
	(vshlcq_m): Define polymorphic variant.
	* config/arm/arm_mve_builtins.def (QUADOP_NONE_NONE_UNONE_IMM_UNONE):
	Use builtin qualifier.
	(QUADOP_UNONE_UNONE_UNONE_IMM_UNONE): Likewise.
	* config/arm/mve.md (mve_vshlcq_m_vec_<supf><mode>): Define RTL pattern.
	(mve_vshlcq_m_carry_<supf><mode>): Likewise.
	(mve_vshlcq_m_<supf><mode>): Likewise.

2020-03-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (LSLL_QUALIFIERS): Define builtin qualifier.
	(UQSHL_QUALIFIERS): Likewise.
	(ASRL_QUALIFIERS): Likewise.
	(SQSHL_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (__ARM_BIG_ENDIAN): Check to not support MVE in
	Big-Endian Mode.
	(sqrshr): Define macro.
	(sqrshrl): Likewise.
	(sqrshrl_sat48): Likewise.
	(sqshl): Likewise.
	(sqshll): Likewise.
	(srshr): Likewise.
	(srshrl): Likewise.
	(uqrshl): Likewise.
	(uqrshll): Likewise.
	(uqrshll_sat48): Likewise.
	(uqshl): Likewise.
	(uqshll): Likewise.
	(urshr): Likewise.
	(urshrl): Likewise.
	(lsll): Likewise.
	(asrl): Likewise.
	(__arm_lsll): Define intrinsic.
	(__arm_asrl): Likewise.
	(__arm_uqrshll): Likewise.
	(__arm_uqrshll_sat48): Likewise.
	(__arm_sqrshrl): Likewise.
	(__arm_sqrshrl_sat48): Likewise.
	(__arm_uqshll): Likewise.
	(__arm_urshrl): Likewise.
	(__arm_srshrl): Likewise.
	(__arm_sqshll): Likewise.
	(__arm_uqrshl): Likewise.
	(__arm_sqrshr): Likewise.
	(__arm_uqshl): Likewise.
	(__arm_urshr): Likewise.
	(__arm_sqshl): Likewise.
	(__arm_srshr): Likewise.
	* config/arm/arm_mve_builtins.def (LSLL_QUALIFIERS): Use builtin
	qualifier.
	(UQSHL_QUALIFIERS): Likewise.
	(ASRL_QUALIFIERS): Likewise.
	(SQSHL_QUALIFIERS): Likewise.
	* config/arm/mve.md (mve_uqrshll_sat<supf>_di): Define RTL pattern.
	(mve_sqrshrl_sat<supf>_di): Likewise.
	(mve_uqrshl_si): Likewise.
	(mve_sqrshr_si): Likewise.
	(mve_uqshll_di): Likewise.
	(mve_urshrl_di): Likewise.
	(mve_uqshl_si): Likewise.
	(mve_urshr_si): Likewise.
	(mve_sqshl_si): Likewise.
	(mve_srshr_si): Likewise.
	(mve_srshrl_di): Likewise.
	(mve_sqshll_di): Likewise.

2020-03-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm_mve.h (vsetq_lane_f16): Define macro.
	(vsetq_lane_f32): Likewise.
	(vsetq_lane_s16): Likewise.
	(vsetq_lane_s32): Likewise.
	(vsetq_lane_s8): Likewise.
	(vsetq_lane_s64): Likewise.
	(vsetq_lane_u8): Likewise.
	(vsetq_lane_u16): Likewise.
	(vsetq_lane_u32): Likewise.
	(vsetq_lane_u64): Likewise.
	(vgetq_lane_f16): Likewise.
	(vgetq_lane_f32): Likewise.
	(vgetq_lane_s16): Likewise.
	(vgetq_lane_s32): Likewise.
	(vgetq_lane_s8): Likewise.
	(vgetq_lane_s64): Likewise.
	(vgetq_lane_u8): Likewise.
	(vgetq_lane_u16): Likewise.
	(vgetq_lane_u32): Likewise.
	(vgetq_lane_u64): Likewise.
	(__ARM_NUM_LANES): Likewise.
	(__ARM_LANEQ): Likewise.
	(__ARM_CHECK_LANEQ): Likewise.
	(__arm_vsetq_lane_s16): Define intrinsic.
	(__arm_vsetq_lane_s32): Likewise.
	(__arm_vsetq_lane_s8): Likewise.
	(__arm_vsetq_lane_s64): Likewise.
	(__arm_vsetq_lane_u8): Likewise.
	(__arm_vsetq_lane_u16): Likewise.
	(__arm_vsetq_lane_u32): Likewise.
	(__arm_vsetq_lane_u64): Likewise.
	(__arm_vgetq_lane_s16): Likewise.
	(__arm_vgetq_lane_s32): Likewise.
	(__arm_vgetq_lane_s8): Likewise.
	(__arm_vgetq_lane_s64): Likewise.
	(__arm_vgetq_lane_u8): Likewise.
	(__arm_vgetq_lane_u16): Likewise.
	(__arm_vgetq_lane_u32): Likewise.
	(__arm_vgetq_lane_u64): Likewise.
	(__arm_vsetq_lane_f16): Likewise.
	(__arm_vsetq_lane_f32): Likewise.
	(__arm_vgetq_lane_f16): Likewise.
	(__arm_vgetq_lane_f32): Likewise.
	(vgetq_lane): Define polymorphic variant.
	(vsetq_lane): Likewise.
	* config/arm/mve.md (mve_vec_extract<mode><V_elem_l>): Define RTL
	pattern.
	(mve_vec_extractv2didi): Likewise.
	(mve_vec_extract_sext_internal<mode>): Likewise.
	(mve_vec_extract_zext_internal<mode>): Likewise.
	(mve_vec_set<mode>_internal): Likewise.
	(mve_vec_setv2di_internal): Likewise.
	* config/arm/neon.md (vec_set<mode>): Move RTL pattern to vec-common.md
	file.
	(vec_extract<mode><V_elem_l>): Rename to
	"neon_vec_extract<mode><V_elem_l>".
	(vec_extractv2didi): Rename to "neon_vec_extractv2didi".
	* config/arm/vec-common.md (vec_extract<mode><V_elem_l>): Define RTL
	pattern common for MVE and NEON.
	(vec_set<mode>): Move RTL pattern from neon.md and modify to accept both
	MVE and NEON.

2020-03-23  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/mve.md (earlyclobber_32): New mode attribute.
	(mve_vrev64q_*, mve_vcaddq*, mve_vhcaddq_*, mve_vcmulq_*,
	 mve_vmull[bt]q_*, mve_vqdmull[bt]q_*): Add appropriate early clobbers.

2020-03-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94261
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Remove
	IL operand swapping code.
	(vect_slp_rearrange_stmts): Do not arrange isomorphic
	nodes that would need operation code adjustments.

2020-03-23  Tobias Burnus  <tobias@codesourcery.com>

	* doc/install.texi (amdgcn-*-amdhsa): Renamed
	from amdgcn-unknown-amdhsa; change
	amdgcn-unknown-amdhsa to amdgcn-amdhsa.

2020-03-23  Richard Biener  <rguenther@suse.de>

	PR ipa/94245
	* ipa-prop.c (ipa_read_jump_function): Build the ADDR_EXRP
	directly rather than also folding it via build_fold_addr_expr.

2020-03-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94266
	* tree-ssa-forwprop.c (pass_forwprop::execute): Do not propagate
	addresses of TARGET_MEM_REFs.

2020-03-23  Martin Liska  <mliska@suse.cz>

	PR ipa/94250
	* symtab.c (symtab_node::clone_references): Save speculative_id
	as ref may be overwritten by create_reference.
	(symtab_node::clone_referring): Likewise.
	(symtab_node::clone_reference): Likewise.

2020-03-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h (JUMP_TABLES_IN_TEXT_SECTION): Remove
	references to Darwin.
	* config/i386/i386.h (JUMP_TABLES_IN_TEXT_SECTION): Define this
	unconditionally and comment on why.

2020-03-21 Iain Sandoe <iain@sandoe.co.uk>

	* config/darwin.c (darwin_mergeable_constant_section): Collect
	section anchor checks into the caller.
	(machopic_select_section): Collect section anchor checks into
	the determination of 'effective zero-size' objects. When the
	size is unknown, assume it is non-zero, and thus return the
	'generic' section for the DECL.

2020-03-21 Iain Sandoe <iain@sandoe.co.uk>

	PR target/93694
	* config/darwin.opt: Amend options descriptions.

2020-03-21  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/94052
	* lra-constraints.c (simplify_operand_subreg): Reload the inner
	register of a paradoxical subreg if simplify_subreg_regno fails
	to give a valid hard register for the outer mode.

2020-03-20  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/93435
	* params.opt (sra-max-propagations): New parameter.
	* tree-sra.c (propagation_budget): New variable.
	(budget_for_propagation_access): New function.
	(propagate_subaccesses_from_rhs): Use it.
	(propagate_subaccesses_from_lhs): Likewise.
	(propagate_all_subaccesses): Set up and destroy propagation_budget.

2020-03-20  Carl Love  <cel@us.ibm.com>

	PR/target 87583
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Add check for TARGET_FPRND for Power 7 or newer.

2020-03-20  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/93347
	* cgraph.c (symbol_table::create_edge): Update calls_comdat_local flag.
	(cgraph_edge::redirect_callee): Move here; likewise.
	(cgraph_node::remove_callees): Update calls_comdat_local flag.
	(cgraph_node::verify_node): Verify that calls_comdat_local flag match
	reality.
	(cgraph_node::check_calls_comdat_local_p): New member function.
	* cgraph.h (cgraph_node::check_calls_comdat_local_p): Declare.
	(cgraph_edge::redirect_callee): Move offline.
	* ipa-fnsummary.c (compute_fn_summary): Do not compute
	calls_comdat_local flag here.
	* ipa-inline-transform.c (inline_call): Fix updating of
	calls_comdat_local flag.
	* ipa-split.c (split_function): Use true instead of 1 to set the flag.
	* symtab.c (symtab_node::add_to_same_comdat_group): Update
	calls_comdat_local flag.

2020-03-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Dump SLP tree
	from the possibly modified root.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm_mve.h (vst1q_p_u8): Define macro.
	(vst1q_p_s8): Likewise.
	(vst2q_s8): Likewise.
	(vst2q_u8): Likewise.
	(vld1q_z_u8): Likewise.
	(vld1q_z_s8): Likewise.
	(vld2q_s8): Likewise.
	(vld2q_u8): Likewise.
	(vld4q_s8): Likewise.
	(vld4q_u8): Likewise.
	(vst1q_p_u16): Likewise.
	(vst1q_p_s16): Likewise.
	(vst2q_s16): Likewise.
	(vst2q_u16): Likewise.
	(vld1q_z_u16): Likewise.
	(vld1q_z_s16): Likewise.
	(vld2q_s16): Likewise.
	(vld2q_u16): Likewise.
	(vld4q_s16): Likewise.
	(vld4q_u16): Likewise.
	(vst1q_p_u32): Likewise.
	(vst1q_p_s32): Likewise.
	(vst2q_s32): Likewise.
	(vst2q_u32): Likewise.
	(vld1q_z_u32): Likewise.
	(vld1q_z_s32): Likewise.
	(vld2q_s32): Likewise.
	(vld2q_u32): Likewise.
	(vld4q_s32): Likewise.
	(vld4q_u32): Likewise.
	(vld4q_f16): Likewise.
	(vld2q_f16): Likewise.
	(vld1q_z_f16): Likewise.
	(vst2q_f16): Likewise.
	(vst1q_p_f16): Likewise.
	(vld4q_f32): Likewise.
	(vld2q_f32): Likewise.
	(vld1q_z_f32): Likewise.
	(vst2q_f32): Likewise.
	(vst1q_p_f32): Likewise.
	(__arm_vst1q_p_u8): Define intrinsic.
	(__arm_vst1q_p_s8): Likewise.
	(__arm_vst2q_s8): Likewise.
	(__arm_vst2q_u8): Likewise.
	(__arm_vld1q_z_u8): Likewise.
	(__arm_vld1q_z_s8): Likewise.
	(__arm_vld2q_s8): Likewise.
	(__arm_vld2q_u8): Likewise.
	(__arm_vld4q_s8): Likewise.
	(__arm_vld4q_u8): Likewise.
	(__arm_vst1q_p_u16): Likewise.
	(__arm_vst1q_p_s16): Likewise.
	(__arm_vst2q_s16): Likewise.
	(__arm_vst2q_u16): Likewise.
	(__arm_vld1q_z_u16): Likewise.
	(__arm_vld1q_z_s16): Likewise.
	(__arm_vld2q_s16): Likewise.
	(__arm_vld2q_u16): Likewise.
	(__arm_vld4q_s16): Likewise.
	(__arm_vld4q_u16): Likewise.
	(__arm_vst1q_p_u32): Likewise.
	(__arm_vst1q_p_s32): Likewise.
	(__arm_vst2q_s32): Likewise.
	(__arm_vst2q_u32): Likewise.
	(__arm_vld1q_z_u32): Likewise.
	(__arm_vld1q_z_s32): Likewise.
	(__arm_vld2q_s32): Likewise.
	(__arm_vld2q_u32): Likewise.
	(__arm_vld4q_s32): Likewise.
	(__arm_vld4q_u32): Likewise.
	(__arm_vld4q_f16): Likewise.
	(__arm_vld2q_f16): Likewise.
	(__arm_vld1q_z_f16): Likewise.
	(__arm_vst2q_f16): Likewise.
	(__arm_vst1q_p_f16): Likewise.
	(__arm_vld4q_f32): Likewise.
	(__arm_vld2q_f32): Likewise.
	(__arm_vld1q_z_f32): Likewise.
	(__arm_vst2q_f32): Likewise.
	(__arm_vst1q_p_f32): Likewise.
	(vld1q_z): Define polymorphic variant.
	(vld2q): Likewise.
	(vld4q): Likewise.
	(vst1q_p): Likewise.
	(vst2q): Likewise.
	* config/arm/arm_mve_builtins.def (STORE1): Use builtin qualifier.
	(LOAD1): Likewise.
	* config/arm/mve.md (mve_vst2q<mode>): Define RTL pattern.
	(mve_vld2q<mode>): Likewise.
	(mve_vld4q<mode>): Likewise.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm-builtins.c (ARM_BUILTIN_GET_FPSCR_NZCVQC): Define.
	(ARM_BUILTIN_SET_FPSCR_NZCVQC): Likewise.	
	(arm_init_mve_builtins): Add "__builtin_arm_get_fpscr_nzcvqc" and
	"__builtin_arm_set_fpscr_nzcvqc" to arm_builtin_decls array. 
	(arm_expand_builtin): Define case ARM_BUILTIN_GET_FPSCR_NZCVQC
	and ARM_BUILTIN_SET_FPSCR_NZCVQC.
	* config/arm/arm_mve.h (vadciq_s32): Define macro.
	(vadciq_u32): Likewise.
	(vadciq_m_s32): Likewise.
	(vadciq_m_u32): Likewise.
	(vadcq_s32): Likewise.
	(vadcq_u32): Likewise.
	(vadcq_m_s32): Likewise.
	(vadcq_m_u32): Likewise.
	(vsbciq_s32): Likewise.
	(vsbciq_u32): Likewise.
	(vsbciq_m_s32): Likewise.
	(vsbciq_m_u32): Likewise.
	(vsbcq_s32): Likewise.
	(vsbcq_u32): Likewise.
	(vsbcq_m_s32): Likewise.
	(vsbcq_m_u32): Likewise.
	(__arm_vadciq_s32): Define intrinsic.
	(__arm_vadciq_u32): Likewise.
	(__arm_vadciq_m_s32): Likewise.
	(__arm_vadciq_m_u32): Likewise.
	(__arm_vadcq_s32): Likewise.
	(__arm_vadcq_u32): Likewise.
	(__arm_vadcq_m_s32): Likewise.
	(__arm_vadcq_m_u32): Likewise.
	(__arm_vsbciq_s32): Likewise.
	(__arm_vsbciq_u32): Likewise.
	(__arm_vsbciq_m_s32): Likewise.
	(__arm_vsbciq_m_u32): Likewise.
	(__arm_vsbcq_s32): Likewise.
	(__arm_vsbcq_u32): Likewise.
	(__arm_vsbcq_m_s32): Likewise.
	(__arm_vsbcq_m_u32): Likewise.
	(vadciq_m): Define polymorphic variant.
	(vadciq): Likewise.
	(vadcq_m): Likewise.
	(vadcq): Likewise.
	(vsbciq_m): Likewise.
	(vsbciq): Likewise.
	(vsbcq_m): Likewise.
	(vsbcq): Likewise.
	* config/arm/arm_mve_builtins.def (BINOP_NONE_NONE_NONE): Use builtin
	qualifier.
	(BINOP_UNONE_UNONE_UNONE): Likewise.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_UNONE_UNONE): Likewise.
	* config/arm/mve.md (VADCIQ): Define iterator.
	(VADCIQ_M): Likewise.
	(VSBCQ): Likewise.
	(VSBCQ_M): Likewise.
	(VSBCIQ): Likewise.
	(VSBCIQ_M): Likewise.
	(VADCQ): Likewise.
	(VADCQ_M): Likewise.
	(mve_vadciq_m_<supf>v4si): Define RTL pattern.
	(mve_vadciq_<supf>v4si): Likewise.
	(mve_vadcq_m_<supf>v4si): Likewise.
	(mve_vadcq_<supf>v4si): Likewise.
	(mve_vsbciq_m_<supf>v4si): Likewise.
	(mve_vsbciq_<supf>v4si): Likewise.
	(mve_vsbcq_m_<supf>v4si): Likewise.
	(mve_vsbcq_<supf>v4si): Likewise.
	(get_fpscr_nzcvqc): Define isns.
	(set_fpscr_nzcvqc): Define isns.
	* config/arm/unspecs.md (UNSPEC_GET_FPSCR_NZCVQC): Define.
	(UNSPEC_SET_FPSCR_NZCVQC): Define.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vddupq_x_n_u8): Define macro.
	(vddupq_x_n_u16): Likewise.
	(vddupq_x_n_u32): Likewise.
	(vddupq_x_wb_u8): Likewise.
	(vddupq_x_wb_u16): Likewise.
	(vddupq_x_wb_u32): Likewise.
	(vdwdupq_x_n_u8): Likewise.
	(vdwdupq_x_n_u16): Likewise.
	(vdwdupq_x_n_u32): Likewise.
	(vdwdupq_x_wb_u8): Likewise.
	(vdwdupq_x_wb_u16): Likewise.
	(vdwdupq_x_wb_u32): Likewise.
	(vidupq_x_n_u8): Likewise.
	(vidupq_x_n_u16): Likewise.
	(vidupq_x_n_u32): Likewise.
	(vidupq_x_wb_u8): Likewise.
	(vidupq_x_wb_u16): Likewise.
	(vidupq_x_wb_u32): Likewise.
	(viwdupq_x_n_u8): Likewise.
	(viwdupq_x_n_u16): Likewise.
	(viwdupq_x_n_u32): Likewise.
	(viwdupq_x_wb_u8): Likewise.
	(viwdupq_x_wb_u16): Likewise.
	(viwdupq_x_wb_u32): Likewise.
	(vdupq_x_n_s8): Likewise.
	(vdupq_x_n_s16): Likewise.
	(vdupq_x_n_s32): Likewise.
	(vdupq_x_n_u8): Likewise.
	(vdupq_x_n_u16): Likewise.
	(vdupq_x_n_u32): Likewise.
	(vminq_x_s8): Likewise.
	(vminq_x_s16): Likewise.
	(vminq_x_s32): Likewise.
	(vminq_x_u8): Likewise.
	(vminq_x_u16): Likewise.
	(vminq_x_u32): Likewise.
	(vmaxq_x_s8): Likewise.
	(vmaxq_x_s16): Likewise.
	(vmaxq_x_s32): Likewise.
	(vmaxq_x_u8): Likewise.
	(vmaxq_x_u16): Likewise.
	(vmaxq_x_u32): Likewise.
	(vabdq_x_s8): Likewise.
	(vabdq_x_s16): Likewise.
	(vabdq_x_s32): Likewise.
	(vabdq_x_u8): Likewise.
	(vabdq_x_u16): Likewise.
	(vabdq_x_u32): Likewise.
	(vabsq_x_s8): Likewise.
	(vabsq_x_s16): Likewise.
	(vabsq_x_s32): Likewise.
	(vaddq_x_s8): Likewise.
	(vaddq_x_s16): Likewise.
	(vaddq_x_s32): Likewise.
	(vaddq_x_n_s8): Likewise.
	(vaddq_x_n_s16): Likewise.
	(vaddq_x_n_s32): Likewise.
	(vaddq_x_u8): Likewise.
	(vaddq_x_u16): Likewise.
	(vaddq_x_u32): Likewise.
	(vaddq_x_n_u8): Likewise.
	(vaddq_x_n_u16): Likewise.
	(vaddq_x_n_u32): Likewise.
	(vclsq_x_s8): Likewise.
	(vclsq_x_s16): Likewise.
	(vclsq_x_s32): Likewise.
	(vclzq_x_s8): Likewise.
	(vclzq_x_s16): Likewise.
	(vclzq_x_s32): Likewise.
	(vclzq_x_u8): Likewise.
	(vclzq_x_u16): Likewise.
	(vclzq_x_u32): Likewise.
	(vnegq_x_s8): Likewise.
	(vnegq_x_s16): Likewise.
	(vnegq_x_s32): Likewise.
	(vmulhq_x_s8): Likewise.
	(vmulhq_x_s16): Likewise.
	(vmulhq_x_s32): Likewise.
	(vmulhq_x_u8): Likewise.
	(vmulhq_x_u16): Likewise.
	(vmulhq_x_u32): Likewise.
	(vmullbq_poly_x_p8): Likewise.
	(vmullbq_poly_x_p16): Likewise.
	(vmullbq_int_x_s8): Likewise.
	(vmullbq_int_x_s16): Likewise.
	(vmullbq_int_x_s32): Likewise.
	(vmullbq_int_x_u8): Likewise.
	(vmullbq_int_x_u16): Likewise.
	(vmullbq_int_x_u32): Likewise.
	(vmulltq_poly_x_p8): Likewise.
	(vmulltq_poly_x_p16): Likewise.
	(vmulltq_int_x_s8): Likewise.
	(vmulltq_int_x_s16): Likewise.
	(vmulltq_int_x_s32): Likewise.
	(vmulltq_int_x_u8): Likewise.
	(vmulltq_int_x_u16): Likewise.
	(vmulltq_int_x_u32): Likewise.
	(vmulq_x_s8): Likewise.
	(vmulq_x_s16): Likewise.
	(vmulq_x_s32): Likewise.
	(vmulq_x_n_s8): Likewise.
	(vmulq_x_n_s16): Likewise.
	(vmulq_x_n_s32): Likewise.
	(vmulq_x_u8): Likewise.
	(vmulq_x_u16): Likewise.
	(vmulq_x_u32): Likewise.
	(vmulq_x_n_u8): Likewise.
	(vmulq_x_n_u16): Likewise.
	(vmulq_x_n_u32): Likewise.
	(vsubq_x_s8): Likewise.
	(vsubq_x_s16): Likewise.
	(vsubq_x_s32): Likewise.
	(vsubq_x_n_s8): Likewise.
	(vsubq_x_n_s16): Likewise.
	(vsubq_x_n_s32): Likewise.
	(vsubq_x_u8): Likewise.
	(vsubq_x_u16): Likewise.
	(vsubq_x_u32): Likewise.
	(vsubq_x_n_u8): Likewise.
	(vsubq_x_n_u16): Likewise.
	(vsubq_x_n_u32): Likewise.
	(vcaddq_rot90_x_s8): Likewise.
	(vcaddq_rot90_x_s16): Likewise.
	(vcaddq_rot90_x_s32): Likewise.
	(vcaddq_rot90_x_u8): Likewise.
	(vcaddq_rot90_x_u16): Likewise.
	(vcaddq_rot90_x_u32): Likewise.
	(vcaddq_rot270_x_s8): Likewise.
	(vcaddq_rot270_x_s16): Likewise.
	(vcaddq_rot270_x_s32): Likewise.
	(vcaddq_rot270_x_u8): Likewise.
	(vcaddq_rot270_x_u16): Likewise.
	(vcaddq_rot270_x_u32): Likewise.
	(vhaddq_x_n_s8): Likewise.
	(vhaddq_x_n_s16): Likewise.
	(vhaddq_x_n_s32): Likewise.
	(vhaddq_x_n_u8): Likewise.
	(vhaddq_x_n_u16): Likewise.
	(vhaddq_x_n_u32): Likewise.
	(vhaddq_x_s8): Likewise.
	(vhaddq_x_s16): Likewise.
	(vhaddq_x_s32): Likewise.
	(vhaddq_x_u8): Likewise.
	(vhaddq_x_u16): Likewise.
	(vhaddq_x_u32): Likewise.
	(vhcaddq_rot90_x_s8): Likewise.
	(vhcaddq_rot90_x_s16): Likewise.
	(vhcaddq_rot90_x_s32): Likewise.
	(vhcaddq_rot270_x_s8): Likewise.
	(vhcaddq_rot270_x_s16): Likewise.
	(vhcaddq_rot270_x_s32): Likewise.
	(vhsubq_x_n_s8): Likewise.
	(vhsubq_x_n_s16): Likewise.
	(vhsubq_x_n_s32): Likewise.
	(vhsubq_x_n_u8): Likewise.
	(vhsubq_x_n_u16): Likewise.
	(vhsubq_x_n_u32): Likewise.
	(vhsubq_x_s8): Likewise.
	(vhsubq_x_s16): Likewise.
	(vhsubq_x_s32): Likewise.
	(vhsubq_x_u8): Likewise.
	(vhsubq_x_u16): Likewise.
	(vhsubq_x_u32): Likewise.
	(vrhaddq_x_s8): Likewise.
	(vrhaddq_x_s16): Likewise.
	(vrhaddq_x_s32): Likewise.
	(vrhaddq_x_u8): Likewise.
	(vrhaddq_x_u16): Likewise.
	(vrhaddq_x_u32): Likewise.
	(vrmulhq_x_s8): Likewise.
	(vrmulhq_x_s16): Likewise.
	(vrmulhq_x_s32): Likewise.
	(vrmulhq_x_u8): Likewise.
	(vrmulhq_x_u16): Likewise.
	(vrmulhq_x_u32): Likewise.
	(vandq_x_s8): Likewise.
	(vandq_x_s16): Likewise.
	(vandq_x_s32): Likewise.
	(vandq_x_u8): Likewise.
	(vandq_x_u16): Likewise.
	(vandq_x_u32): Likewise.
	(vbicq_x_s8): Likewise.
	(vbicq_x_s16): Likewise.
	(vbicq_x_s32): Likewise.
	(vbicq_x_u8): Likewise.
	(vbicq_x_u16): Likewise.
	(vbicq_x_u32): Likewise.
	(vbrsrq_x_n_s8): Likewise.
	(vbrsrq_x_n_s16): Likewise.
	(vbrsrq_x_n_s32): Likewise.
	(vbrsrq_x_n_u8): Likewise.
	(vbrsrq_x_n_u16): Likewise.
	(vbrsrq_x_n_u32): Likewise.
	(veorq_x_s8): Likewise.
	(veorq_x_s16): Likewise.
	(veorq_x_s32): Likewise.
	(veorq_x_u8): Likewise.
	(veorq_x_u16): Likewise.
	(veorq_x_u32): Likewise.
	(vmovlbq_x_s8): Likewise.
	(vmovlbq_x_s16): Likewise.
	(vmovlbq_x_u8): Likewise.
	(vmovlbq_x_u16): Likewise.
	(vmovltq_x_s8): Likewise.
	(vmovltq_x_s16): Likewise.
	(vmovltq_x_u8): Likewise.
	(vmovltq_x_u16): Likewise.
	(vmvnq_x_s8): Likewise.
	(vmvnq_x_s16): Likewise.
	(vmvnq_x_s32): Likewise.
	(vmvnq_x_u8): Likewise.
	(vmvnq_x_u16): Likewise.
	(vmvnq_x_u32): Likewise.
	(vmvnq_x_n_s16): Likewise.
	(vmvnq_x_n_s32): Likewise.
	(vmvnq_x_n_u16): Likewise.
	(vmvnq_x_n_u32): Likewise.
	(vornq_x_s8): Likewise.
	(vornq_x_s16): Likewise.
	(vornq_x_s32): Likewise.
	(vornq_x_u8): Likewise.
	(vornq_x_u16): Likewise.
	(vornq_x_u32): Likewise.
	(vorrq_x_s8): Likewise.
	(vorrq_x_s16): Likewise.
	(vorrq_x_s32): Likewise.
	(vorrq_x_u8): Likewise.
	(vorrq_x_u16): Likewise.
	(vorrq_x_u32): Likewise.
	(vrev16q_x_s8): Likewise.
	(vrev16q_x_u8): Likewise.
	(vrev32q_x_s8): Likewise.
	(vrev32q_x_s16): Likewise.
	(vrev32q_x_u8): Likewise.
	(vrev32q_x_u16): Likewise.
	(vrev64q_x_s8): Likewise.
	(vrev64q_x_s16): Likewise.
	(vrev64q_x_s32): Likewise.
	(vrev64q_x_u8): Likewise.
	(vrev64q_x_u16): Likewise.
	(vrev64q_x_u32): Likewise.
	(vrshlq_x_s8): Likewise.
	(vrshlq_x_s16): Likewise.
	(vrshlq_x_s32): Likewise.
	(vrshlq_x_u8): Likewise.
	(vrshlq_x_u16): Likewise.
	(vrshlq_x_u32): Likewise.
	(vshllbq_x_n_s8): Likewise.
	(vshllbq_x_n_s16): Likewise.
	(vshllbq_x_n_u8): Likewise.
	(vshllbq_x_n_u16): Likewise.
	(vshlltq_x_n_s8): Likewise.
	(vshlltq_x_n_s16): Likewise.
	(vshlltq_x_n_u8): Likewise.
	(vshlltq_x_n_u16): Likewise.
	(vshlq_x_s8): Likewise.
	(vshlq_x_s16): Likewise.
	(vshlq_x_s32): Likewise.
	(vshlq_x_u8): Likewise.
	(vshlq_x_u16): Likewise.
	(vshlq_x_u32): Likewise.
	(vshlq_x_n_s8): Likewise.
	(vshlq_x_n_s16): Likewise.
	(vshlq_x_n_s32): Likewise.
	(vshlq_x_n_u8): Likewise.
	(vshlq_x_n_u16): Likewise.
	(vshlq_x_n_u32): Likewise.
	(vrshrq_x_n_s8): Likewise.
	(vrshrq_x_n_s16): Likewise.
	(vrshrq_x_n_s32): Likewise.
	(vrshrq_x_n_u8): Likewise.
	(vrshrq_x_n_u16): Likewise.
	(vrshrq_x_n_u32): Likewise.
	(vshrq_x_n_s8): Likewise.
	(vshrq_x_n_s16): Likewise.
	(vshrq_x_n_s32): Likewise.
	(vshrq_x_n_u8): Likewise.
	(vshrq_x_n_u16): Likewise.
	(vshrq_x_n_u32): Likewise.
	(vdupq_x_n_f16): Likewise.
	(vdupq_x_n_f32): Likewise.
	(vminnmq_x_f16): Likewise.
	(vminnmq_x_f32): Likewise.
	(vmaxnmq_x_f16): Likewise.
	(vmaxnmq_x_f32): Likewise.
	(vabdq_x_f16): Likewise.
	(vabdq_x_f32): Likewise.
	(vabsq_x_f16): Likewise.
	(vabsq_x_f32): Likewise.
	(vaddq_x_f16): Likewise.
	(vaddq_x_f32): Likewise.
	(vaddq_x_n_f16): Likewise.
	(vaddq_x_n_f32): Likewise.
	(vnegq_x_f16): Likewise.
	(vnegq_x_f32): Likewise.
	(vmulq_x_f16): Likewise.
	(vmulq_x_f32): Likewise.
	(vmulq_x_n_f16): Likewise.
	(vmulq_x_n_f32): Likewise.
	(vsubq_x_f16): Likewise.
	(vsubq_x_f32): Likewise.
	(vsubq_x_n_f16): Likewise.
	(vsubq_x_n_f32): Likewise.
	(vcaddq_rot90_x_f16): Likewise.
	(vcaddq_rot90_x_f32): Likewise.
	(vcaddq_rot270_x_f16): Likewise.
	(vcaddq_rot270_x_f32): Likewise.
	(vcmulq_x_f16): Likewise.
	(vcmulq_x_f32): Likewise.
	(vcmulq_rot90_x_f16): Likewise.
	(vcmulq_rot90_x_f32): Likewise.
	(vcmulq_rot180_x_f16): Likewise.
	(vcmulq_rot180_x_f32): Likewise.
	(vcmulq_rot270_x_f16): Likewise.
	(vcmulq_rot270_x_f32): Likewise.
	(vcvtaq_x_s16_f16): Likewise.
	(vcvtaq_x_s32_f32): Likewise.
	(vcvtaq_x_u16_f16): Likewise.
	(vcvtaq_x_u32_f32): Likewise.
	(vcvtnq_x_s16_f16): Likewise.
	(vcvtnq_x_s32_f32): Likewise.
	(vcvtnq_x_u16_f16): Likewise.
	(vcvtnq_x_u32_f32): Likewise.
	(vcvtpq_x_s16_f16): Likewise.
	(vcvtpq_x_s32_f32): Likewise.
	(vcvtpq_x_u16_f16): Likewise.
	(vcvtpq_x_u32_f32): Likewise.
	(vcvtmq_x_s16_f16): Likewise.
	(vcvtmq_x_s32_f32): Likewise.
	(vcvtmq_x_u16_f16): Likewise.
	(vcvtmq_x_u32_f32): Likewise.
	(vcvtbq_x_f32_f16): Likewise.
	(vcvttq_x_f32_f16): Likewise.
	(vcvtq_x_f16_u16): Likewise.
	(vcvtq_x_f16_s16): Likewise.
	(vcvtq_x_f32_s32): Likewise.
	(vcvtq_x_f32_u32): Likewise.
	(vcvtq_x_n_f16_s16): Likewise.
	(vcvtq_x_n_f16_u16): Likewise.
	(vcvtq_x_n_f32_s32): Likewise.
	(vcvtq_x_n_f32_u32): Likewise.
	(vcvtq_x_s16_f16): Likewise.
	(vcvtq_x_s32_f32): Likewise.
	(vcvtq_x_u16_f16): Likewise.
	(vcvtq_x_u32_f32): Likewise.
	(vcvtq_x_n_s16_f16): Likewise.
	(vcvtq_x_n_s32_f32): Likewise.
	(vcvtq_x_n_u16_f16): Likewise.
	(vcvtq_x_n_u32_f32): Likewise.
	(vrndq_x_f16): Likewise.
	(vrndq_x_f32): Likewise.
	(vrndnq_x_f16): Likewise.
	(vrndnq_x_f32): Likewise.
	(vrndmq_x_f16): Likewise.
	(vrndmq_x_f32): Likewise.
	(vrndpq_x_f16): Likewise.
	(vrndpq_x_f32): Likewise.
	(vrndaq_x_f16): Likewise.
	(vrndaq_x_f32): Likewise.
	(vrndxq_x_f16): Likewise.
	(vrndxq_x_f32): Likewise.
	(vandq_x_f16): Likewise.
	(vandq_x_f32): Likewise.
	(vbicq_x_f16): Likewise.
	(vbicq_x_f32): Likewise.
	(vbrsrq_x_n_f16): Likewise.
	(vbrsrq_x_n_f32): Likewise.
	(veorq_x_f16): Likewise.
	(veorq_x_f32): Likewise.
	(vornq_x_f16): Likewise.
	(vornq_x_f32): Likewise.
	(vorrq_x_f16): Likewise.
	(vorrq_x_f32): Likewise.
	(vrev32q_x_f16): Likewise.
	(vrev64q_x_f16): Likewise.
	(vrev64q_x_f32): Likewise.
	(__arm_vddupq_x_n_u8): Define intrinsic.
	(__arm_vddupq_x_n_u16): Likewise.
	(__arm_vddupq_x_n_u32): Likewise.
	(__arm_vddupq_x_wb_u8): Likewise.
	(__arm_vddupq_x_wb_u16): Likewise.
	(__arm_vddupq_x_wb_u32): Likewise.
	(__arm_vdwdupq_x_n_u8): Likewise.
	(__arm_vdwdupq_x_n_u16): Likewise.
	(__arm_vdwdupq_x_n_u32): Likewise.
	(__arm_vdwdupq_x_wb_u8): Likewise.
	(__arm_vdwdupq_x_wb_u16): Likewise.
	(__arm_vdwdupq_x_wb_u32): Likewise.
	(__arm_vidupq_x_n_u8): Likewise.
	(__arm_vidupq_x_n_u16): Likewise.
	(__arm_vidupq_x_n_u32): Likewise.
	(__arm_vidupq_x_wb_u8): Likewise.
	(__arm_vidupq_x_wb_u16): Likewise.
	(__arm_vidupq_x_wb_u32): Likewise.
	(__arm_viwdupq_x_n_u8): Likewise.
	(__arm_viwdupq_x_n_u16): Likewise.
	(__arm_viwdupq_x_n_u32): Likewise.
	(__arm_viwdupq_x_wb_u8): Likewise.
	(__arm_viwdupq_x_wb_u16): Likewise.
	(__arm_viwdupq_x_wb_u32): Likewise.
	(__arm_vdupq_x_n_s8): Likewise.
	(__arm_vdupq_x_n_s16): Likewise.
	(__arm_vdupq_x_n_s32): Likewise.
	(__arm_vdupq_x_n_u8): Likewise.
	(__arm_vdupq_x_n_u16): Likewise.
	(__arm_vdupq_x_n_u32): Likewise.
	(__arm_vminq_x_s8): Likewise.
	(__arm_vminq_x_s16): Likewise.
	(__arm_vminq_x_s32): Likewise.
	(__arm_vminq_x_u8): Likewise.
	(__arm_vminq_x_u16): Likewise.
	(__arm_vminq_x_u32): Likewise.
	(__arm_vmaxq_x_s8): Likewise.
	(__arm_vmaxq_x_s16): Likewise.
	(__arm_vmaxq_x_s32): Likewise.
	(__arm_vmaxq_x_u8): Likewise.
	(__arm_vmaxq_x_u16): Likewise.
	(__arm_vmaxq_x_u32): Likewise.
	(__arm_vabdq_x_s8): Likewise.
	(__arm_vabdq_x_s16): Likewise.
	(__arm_vabdq_x_s32): Likewise.
	(__arm_vabdq_x_u8): Likewise.
	(__arm_vabdq_x_u16): Likewise.
	(__arm_vabdq_x_u32): Likewise.
	(__arm_vabsq_x_s8): Likewise.
	(__arm_vabsq_x_s16): Likewise.
	(__arm_vabsq_x_s32): Likewise.
	(__arm_vaddq_x_s8): Likewise.
	(__arm_vaddq_x_s16): Likewise.
	(__arm_vaddq_x_s32): Likewise.
	(__arm_vaddq_x_n_s8): Likewise.
	(__arm_vaddq_x_n_s16): Likewise.
	(__arm_vaddq_x_n_s32): Likewise.
	(__arm_vaddq_x_u8): Likewise.
	(__arm_vaddq_x_u16): Likewise.
	(__arm_vaddq_x_u32): Likewise.
	(__arm_vaddq_x_n_u8): Likewise.
	(__arm_vaddq_x_n_u16): Likewise.
	(__arm_vaddq_x_n_u32): Likewise.
	(__arm_vclsq_x_s8): Likewise.
	(__arm_vclsq_x_s16): Likewise.
	(__arm_vclsq_x_s32): Likewise.
	(__arm_vclzq_x_s8): Likewise.
	(__arm_vclzq_x_s16): Likewise.
	(__arm_vclzq_x_s32): Likewise.
	(__arm_vclzq_x_u8): Likewise.
	(__arm_vclzq_x_u16): Likewise.
	(__arm_vclzq_x_u32): Likewise.
	(__arm_vnegq_x_s8): Likewise.
	(__arm_vnegq_x_s16): Likewise.
	(__arm_vnegq_x_s32): Likewise.
	(__arm_vmulhq_x_s8): Likewise.
	(__arm_vmulhq_x_s16): Likewise.
	(__arm_vmulhq_x_s32): Likewise.
	(__arm_vmulhq_x_u8): Likewise.
	(__arm_vmulhq_x_u16): Likewise.
	(__arm_vmulhq_x_u32): Likewise.
	(__arm_vmullbq_poly_x_p8): Likewise.
	(__arm_vmullbq_poly_x_p16): Likewise.
	(__arm_vmullbq_int_x_s8): Likewise.
	(__arm_vmullbq_int_x_s16): Likewise.
	(__arm_vmullbq_int_x_s32): Likewise.
	(__arm_vmullbq_int_x_u8): Likewise.
	(__arm_vmullbq_int_x_u16): Likewise.
	(__arm_vmullbq_int_x_u32): Likewise.
	(__arm_vmulltq_poly_x_p8): Likewise.
	(__arm_vmulltq_poly_x_p16): Likewise.
	(__arm_vmulltq_int_x_s8): Likewise.
	(__arm_vmulltq_int_x_s16): Likewise.
	(__arm_vmulltq_int_x_s32): Likewise.
	(__arm_vmulltq_int_x_u8): Likewise.
	(__arm_vmulltq_int_x_u16): Likewise.
	(__arm_vmulltq_int_x_u32): Likewise.
	(__arm_vmulq_x_s8): Likewise.
	(__arm_vmulq_x_s16): Likewise.
	(__arm_vmulq_x_s32): Likewise.
	(__arm_vmulq_x_n_s8): Likewise.
	(__arm_vmulq_x_n_s16): Likewise.
	(__arm_vmulq_x_n_s32): Likewise.
	(__arm_vmulq_x_u8): Likewise.
	(__arm_vmulq_x_u16): Likewise.
	(__arm_vmulq_x_u32): Likewise.
	(__arm_vmulq_x_n_u8): Likewise.
	(__arm_vmulq_x_n_u16): Likewise.
	(__arm_vmulq_x_n_u32): Likewise.
	(__arm_vsubq_x_s8): Likewise.
	(__arm_vsubq_x_s16): Likewise.
	(__arm_vsubq_x_s32): Likewise.
	(__arm_vsubq_x_n_s8): Likewise.
	(__arm_vsubq_x_n_s16): Likewise.
	(__arm_vsubq_x_n_s32): Likewise.
	(__arm_vsubq_x_u8): Likewise.
	(__arm_vsubq_x_u16): Likewise.
	(__arm_vsubq_x_u32): Likewise.
	(__arm_vsubq_x_n_u8): Likewise.
	(__arm_vsubq_x_n_u16): Likewise.
	(__arm_vsubq_x_n_u32): Likewise.
	(__arm_vcaddq_rot90_x_s8): Likewise.
	(__arm_vcaddq_rot90_x_s16): Likewise.
	(__arm_vcaddq_rot90_x_s32): Likewise.
	(__arm_vcaddq_rot90_x_u8): Likewise.
	(__arm_vcaddq_rot90_x_u16): Likewise.
	(__arm_vcaddq_rot90_x_u32): Likewise.
	(__arm_vcaddq_rot270_x_s8): Likewise.
	(__arm_vcaddq_rot270_x_s16): Likewise.
	(__arm_vcaddq_rot270_x_s32): Likewise.
	(__arm_vcaddq_rot270_x_u8): Likewise.
	(__arm_vcaddq_rot270_x_u16): Likewise.
	(__arm_vcaddq_rot270_x_u32): Likewise.
	(__arm_vhaddq_x_n_s8): Likewise.
	(__arm_vhaddq_x_n_s16): Likewise.
	(__arm_vhaddq_x_n_s32): Likewise.
	(__arm_vhaddq_x_n_u8): Likewise.
	(__arm_vhaddq_x_n_u16): Likewise.
	(__arm_vhaddq_x_n_u32): Likewise.
	(__arm_vhaddq_x_s8): Likewise.
	(__arm_vhaddq_x_s16): Likewise.
	(__arm_vhaddq_x_s32): Likewise.
	(__arm_vhaddq_x_u8): Likewise.
	(__arm_vhaddq_x_u16): Likewise.
	(__arm_vhaddq_x_u32): Likewise.
	(__arm_vhcaddq_rot90_x_s8): Likewise.
	(__arm_vhcaddq_rot90_x_s16): Likewise.
	(__arm_vhcaddq_rot90_x_s32): Likewise.
	(__arm_vhcaddq_rot270_x_s8): Likewise.
	(__arm_vhcaddq_rot270_x_s16): Likewise.
	(__arm_vhcaddq_rot270_x_s32): Likewise.
	(__arm_vhsubq_x_n_s8): Likewise.
	(__arm_vhsubq_x_n_s16): Likewise.
	(__arm_vhsubq_x_n_s32): Likewise.
	(__arm_vhsubq_x_n_u8): Likewise.
	(__arm_vhsubq_x_n_u16): Likewise.
	(__arm_vhsubq_x_n_u32): Likewise.
	(__arm_vhsubq_x_s8): Likewise.
	(__arm_vhsubq_x_s16): Likewise.
	(__arm_vhsubq_x_s32): Likewise.
	(__arm_vhsubq_x_u8): Likewise.
	(__arm_vhsubq_x_u16): Likewise.
	(__arm_vhsubq_x_u32): Likewise.
	(__arm_vrhaddq_x_s8): Likewise.
	(__arm_vrhaddq_x_s16): Likewise.
	(__arm_vrhaddq_x_s32): Likewise.
	(__arm_vrhaddq_x_u8): Likewise.
	(__arm_vrhaddq_x_u16): Likewise.
	(__arm_vrhaddq_x_u32): Likewise.
	(__arm_vrmulhq_x_s8): Likewise.
	(__arm_vrmulhq_x_s16): Likewise.
	(__arm_vrmulhq_x_s32): Likewise.
	(__arm_vrmulhq_x_u8): Likewise.
	(__arm_vrmulhq_x_u16): Likewise.
	(__arm_vrmulhq_x_u32): Likewise.
	(__arm_vandq_x_s8): Likewise.
	(__arm_vandq_x_s16): Likewise.
	(__arm_vandq_x_s32): Likewise.
	(__arm_vandq_x_u8): Likewise.
	(__arm_vandq_x_u16): Likewise.
	(__arm_vandq_x_u32): Likewise.
	(__arm_vbicq_x_s8): Likewise.
	(__arm_vbicq_x_s16): Likewise.
	(__arm_vbicq_x_s32): Likewise.
	(__arm_vbicq_x_u8): Likewise.
	(__arm_vbicq_x_u16): Likewise.
	(__arm_vbicq_x_u32): Likewise.
	(__arm_vbrsrq_x_n_s8): Likewise.
	(__arm_vbrsrq_x_n_s16): Likewise.
	(__arm_vbrsrq_x_n_s32): Likewise.
	(__arm_vbrsrq_x_n_u8): Likewise.
	(__arm_vbrsrq_x_n_u16): Likewise.
	(__arm_vbrsrq_x_n_u32): Likewise.
	(__arm_veorq_x_s8): Likewise.
	(__arm_veorq_x_s16): Likewise.
	(__arm_veorq_x_s32): Likewise.
	(__arm_veorq_x_u8): Likewise.
	(__arm_veorq_x_u16): Likewise.
	(__arm_veorq_x_u32): Likewise.
	(__arm_vmovlbq_x_s8): Likewise.
	(__arm_vmovlbq_x_s16): Likewise.
	(__arm_vmovlbq_x_u8): Likewise.
	(__arm_vmovlbq_x_u16): Likewise.
	(__arm_vmovltq_x_s8): Likewise.
	(__arm_vmovltq_x_s16): Likewise.
	(__arm_vmovltq_x_u8): Likewise.
	(__arm_vmovltq_x_u16): Likewise.
	(__arm_vmvnq_x_s8): Likewise.
	(__arm_vmvnq_x_s16): Likewise.
	(__arm_vmvnq_x_s32): Likewise.
	(__arm_vmvnq_x_u8): Likewise.
	(__arm_vmvnq_x_u16): Likewise.
	(__arm_vmvnq_x_u32): Likewise.
	(__arm_vmvnq_x_n_s16): Likewise.
	(__arm_vmvnq_x_n_s32): Likewise.
	(__arm_vmvnq_x_n_u16): Likewise.
	(__arm_vmvnq_x_n_u32): Likewise.
	(__arm_vornq_x_s8): Likewise.
	(__arm_vornq_x_s16): Likewise.
	(__arm_vornq_x_s32): Likewise.
	(__arm_vornq_x_u8): Likewise.
	(__arm_vornq_x_u16): Likewise.
	(__arm_vornq_x_u32): Likewise.
	(__arm_vorrq_x_s8): Likewise.
	(__arm_vorrq_x_s16): Likewise.
	(__arm_vorrq_x_s32): Likewise.
	(__arm_vorrq_x_u8): Likewise.
	(__arm_vorrq_x_u16): Likewise.
	(__arm_vorrq_x_u32): Likewise.
	(__arm_vrev16q_x_s8): Likewise.
	(__arm_vrev16q_x_u8): Likewise.
	(__arm_vrev32q_x_s8): Likewise.
	(__arm_vrev32q_x_s16): Likewise.
	(__arm_vrev32q_x_u8): Likewise.
	(__arm_vrev32q_x_u16): Likewise.
	(__arm_vrev64q_x_s8): Likewise.
	(__arm_vrev64q_x_s16): Likewise.
	(__arm_vrev64q_x_s32): Likewise.
	(__arm_vrev64q_x_u8): Likewise.
	(__arm_vrev64q_x_u16): Likewise.
	(__arm_vrev64q_x_u32): Likewise.
	(__arm_vrshlq_x_s8): Likewise.
	(__arm_vrshlq_x_s16): Likewise.
	(__arm_vrshlq_x_s32): Likewise.
	(__arm_vrshlq_x_u8): Likewise.
	(__arm_vrshlq_x_u16): Likewise.
	(__arm_vrshlq_x_u32): Likewise.
	(__arm_vshllbq_x_n_s8): Likewise.
	(__arm_vshllbq_x_n_s16): Likewise.
	(__arm_vshllbq_x_n_u8): Likewise.
	(__arm_vshllbq_x_n_u16): Likewise.
	(__arm_vshlltq_x_n_s8): Likewise.
	(__arm_vshlltq_x_n_s16): Likewise.
	(__arm_vshlltq_x_n_u8): Likewise.
	(__arm_vshlltq_x_n_u16): Likewise.
	(__arm_vshlq_x_s8): Likewise.
	(__arm_vshlq_x_s16): Likewise.
	(__arm_vshlq_x_s32): Likewise.
	(__arm_vshlq_x_u8): Likewise.
	(__arm_vshlq_x_u16): Likewise.
	(__arm_vshlq_x_u32): Likewise.
	(__arm_vshlq_x_n_s8): Likewise.
	(__arm_vshlq_x_n_s16): Likewise.
	(__arm_vshlq_x_n_s32): Likewise.
	(__arm_vshlq_x_n_u8): Likewise.
	(__arm_vshlq_x_n_u16): Likewise.
	(__arm_vshlq_x_n_u32): Likewise.
	(__arm_vrshrq_x_n_s8): Likewise.
	(__arm_vrshrq_x_n_s16): Likewise.
	(__arm_vrshrq_x_n_s32): Likewise.
	(__arm_vrshrq_x_n_u8): Likewise.
	(__arm_vrshrq_x_n_u16): Likewise.
	(__arm_vrshrq_x_n_u32): Likewise.
	(__arm_vshrq_x_n_s8): Likewise.
	(__arm_vshrq_x_n_s16): Likewise.
	(__arm_vshrq_x_n_s32): Likewise.
	(__arm_vshrq_x_n_u8): Likewise.
	(__arm_vshrq_x_n_u16): Likewise.
	(__arm_vshrq_x_n_u32): Likewise.
	(__arm_vdupq_x_n_f16): Likewise.
	(__arm_vdupq_x_n_f32): Likewise.
	(__arm_vminnmq_x_f16): Likewise.
	(__arm_vminnmq_x_f32): Likewise.
	(__arm_vmaxnmq_x_f16): Likewise.
	(__arm_vmaxnmq_x_f32): Likewise.
	(__arm_vabdq_x_f16): Likewise.
	(__arm_vabdq_x_f32): Likewise.
	(__arm_vabsq_x_f16): Likewise.
	(__arm_vabsq_x_f32): Likewise.
	(__arm_vaddq_x_f16): Likewise.
	(__arm_vaddq_x_f32): Likewise.
	(__arm_vaddq_x_n_f16): Likewise.
	(__arm_vaddq_x_n_f32): Likewise.
	(__arm_vnegq_x_f16): Likewise.
	(__arm_vnegq_x_f32): Likewise.
	(__arm_vmulq_x_f16): Likewise.
	(__arm_vmulq_x_f32): Likewise.
	(__arm_vmulq_x_n_f16): Likewise.
	(__arm_vmulq_x_n_f32): Likewise.
	(__arm_vsubq_x_f16): Likewise.
	(__arm_vsubq_x_f32): Likewise.
	(__arm_vsubq_x_n_f16): Likewise.
	(__arm_vsubq_x_n_f32): Likewise.
	(__arm_vcaddq_rot90_x_f16): Likewise.
	(__arm_vcaddq_rot90_x_f32): Likewise.
	(__arm_vcaddq_rot270_x_f16): Likewise.
	(__arm_vcaddq_rot270_x_f32): Likewise.
	(__arm_vcmulq_x_f16): Likewise.
	(__arm_vcmulq_x_f32): Likewise.
	(__arm_vcmulq_rot90_x_f16): Likewise.
	(__arm_vcmulq_rot90_x_f32): Likewise.
	(__arm_vcmulq_rot180_x_f16): Likewise.
	(__arm_vcmulq_rot180_x_f32): Likewise.
	(__arm_vcmulq_rot270_x_f16): Likewise.
	(__arm_vcmulq_rot270_x_f32): Likewise.
	(__arm_vcvtaq_x_s16_f16): Likewise.
	(__arm_vcvtaq_x_s32_f32): Likewise.
	(__arm_vcvtaq_x_u16_f16): Likewise.
	(__arm_vcvtaq_x_u32_f32): Likewise.
	(__arm_vcvtnq_x_s16_f16): Likewise.
	(__arm_vcvtnq_x_s32_f32): Likewise.
	(__arm_vcvtnq_x_u16_f16): Likewise.
	(__arm_vcvtnq_x_u32_f32): Likewise.
	(__arm_vcvtpq_x_s16_f16): Likewise.
	(__arm_vcvtpq_x_s32_f32): Likewise.
	(__arm_vcvtpq_x_u16_f16): Likewise.
	(__arm_vcvtpq_x_u32_f32): Likewise.
	(__arm_vcvtmq_x_s16_f16): Likewise.
	(__arm_vcvtmq_x_s32_f32): Likewise.
	(__arm_vcvtmq_x_u16_f16): Likewise.
	(__arm_vcvtmq_x_u32_f32): Likewise.
	(__arm_vcvtbq_x_f32_f16): Likewise.
	(__arm_vcvttq_x_f32_f16): Likewise.
	(__arm_vcvtq_x_f16_u16): Likewise.
	(__arm_vcvtq_x_f16_s16): Likewise.
	(__arm_vcvtq_x_f32_s32): Likewise.
	(__arm_vcvtq_x_f32_u32): Likewise.
	(__arm_vcvtq_x_n_f16_s16): Likewise.
	(__arm_vcvtq_x_n_f16_u16): Likewise.
	(__arm_vcvtq_x_n_f32_s32): Likewise.
	(__arm_vcvtq_x_n_f32_u32): Likewise.
	(__arm_vcvtq_x_s16_f16): Likewise.
	(__arm_vcvtq_x_s32_f32): Likewise.
	(__arm_vcvtq_x_u16_f16): Likewise.
	(__arm_vcvtq_x_u32_f32): Likewise.
	(__arm_vcvtq_x_n_s16_f16): Likewise.
	(__arm_vcvtq_x_n_s32_f32): Likewise.
	(__arm_vcvtq_x_n_u16_f16): Likewise.
	(__arm_vcvtq_x_n_u32_f32): Likewise.
	(__arm_vrndq_x_f16): Likewise.
	(__arm_vrndq_x_f32): Likewise.
	(__arm_vrndnq_x_f16): Likewise.
	(__arm_vrndnq_x_f32): Likewise.
	(__arm_vrndmq_x_f16): Likewise.
	(__arm_vrndmq_x_f32): Likewise.
	(__arm_vrndpq_x_f16): Likewise.
	(__arm_vrndpq_x_f32): Likewise.
	(__arm_vrndaq_x_f16): Likewise.
	(__arm_vrndaq_x_f32): Likewise.
	(__arm_vrndxq_x_f16): Likewise.
	(__arm_vrndxq_x_f32): Likewise.
	(__arm_vandq_x_f16): Likewise.
	(__arm_vandq_x_f32): Likewise.
	(__arm_vbicq_x_f16): Likewise.
	(__arm_vbicq_x_f32): Likewise.
	(__arm_vbrsrq_x_n_f16): Likewise.
	(__arm_vbrsrq_x_n_f32): Likewise.
	(__arm_veorq_x_f16): Likewise.
	(__arm_veorq_x_f32): Likewise.
	(__arm_vornq_x_f16): Likewise.
	(__arm_vornq_x_f32): Likewise.
	(__arm_vorrq_x_f16): Likewise.
	(__arm_vorrq_x_f32): Likewise.
	(__arm_vrev32q_x_f16): Likewise.
	(__arm_vrev64q_x_f16): Likewise.
	(__arm_vrev64q_x_f32): Likewise.
	(vabdq_x): Define polymorphic variant.
	(vabsq_x): Likewise.
	(vaddq_x): Likewise.
	(vandq_x): Likewise.
	(vbicq_x): Likewise.
	(vbrsrq_x): Likewise.
	(vcaddq_rot270_x): Likewise.
	(vcaddq_rot90_x): Likewise.
	(vcmulq_rot180_x): Likewise.
	(vcmulq_rot270_x): Likewise.
	(vcmulq_x): Likewise.
	(vcvtq_x): Likewise.
	(vcvtq_x_n): Likewise.
	(vcvtnq_m): Likewise.
	(veorq_x): Likewise.
	(vmaxnmq_x): Likewise.
	(vminnmq_x): Likewise.
	(vmulq_x): Likewise.
	(vnegq_x): Likewise.
	(vornq_x): Likewise.
	(vorrq_x): Likewise.
	(vrev32q_x): Likewise.
	(vrev64q_x): Likewise.
	(vrndaq_x): Likewise.
	(vrndmq_x): Likewise.
	(vrndnq_x): Likewise.
	(vrndpq_x): Likewise.
	(vrndq_x): Likewise.
	(vrndxq_x): Likewise.
	(vsubq_x): Likewise.
	(vcmulq_rot90_x): Likewise.
	(vadciq): Likewise.
	(vclsq_x): Likewise.
	(vclzq_x): Likewise.
	(vhaddq_x): Likewise.
	(vhcaddq_rot270_x): Likewise.
	(vhcaddq_rot90_x): Likewise.
	(vhsubq_x): Likewise.
	(vmaxq_x): Likewise.
	(vminq_x): Likewise.
	(vmovlbq_x): Likewise.
	(vmovltq_x): Likewise.
	(vmulhq_x): Likewise.
	(vmullbq_int_x): Likewise.
	(vmullbq_poly_x): Likewise.
	(vmulltq_int_x): Likewise.
	(vmulltq_poly_x): Likewise.
	(vmvnq_x): Likewise.
	(vrev16q_x): Likewise.
	(vrhaddq_x): Likewise.
	(vrmulhq_x): Likewise.
	(vrshlq_x): Likewise.
	(vrshrq_x): Likewise.
	(vshllbq_x): Likewise.
	(vshlltq_x): Likewise.
	(vshlq_x_n): Likewise.
	(vshlq_x): Likewise.
	(vdwdupq_x_u8): Likewise.
	(vdwdupq_x_u16): Likewise.
	(vdwdupq_x_u32): Likewise.
	(viwdupq_x_u8): Likewise.
	(viwdupq_x_u16): Likewise.
	(viwdupq_x_u32): Likewise.
	(vidupq_x_u8): Likewise.
	(vddupq_x_u8): Likewise.
	(vidupq_x_u16): Likewise.
	(vddupq_x_u16): Likewise.
	(vidupq_x_u32): Likewise.
	(vddupq_x_u32): Likewise.
	(vshrq_x): Likewise.

2020-03-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Push the stmts
	to vectorize for CTOR defs.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm-builtins.c (LDRGBWBS_QUALIFIERS): Define builtin
	qualifier.
	(LDRGBWBU_QUALIFIERS): Likewise.
	(LDRGBWBS_Z_QUALIFIERS): Likewise.
	(LDRGBWBU_Z_QUALIFIERS): Likewise.
	(STRSBWBS_QUALIFIERS): Likewise.
	(STRSBWBU_QUALIFIERS): Likewise.
	(STRSBWBS_P_QUALIFIERS): Likewise.
	(STRSBWBU_P_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vldrdq_gather_base_wb_s64): Define macro.
	(vldrdq_gather_base_wb_u64): Likewise.
	(vldrdq_gather_base_wb_z_s64): Likewise.
	(vldrdq_gather_base_wb_z_u64): Likewise.
	(vldrwq_gather_base_wb_f32): Likewise.
	(vldrwq_gather_base_wb_s32): Likewise.
	(vldrwq_gather_base_wb_u32): Likewise.
	(vldrwq_gather_base_wb_z_f32): Likewise.
	(vldrwq_gather_base_wb_z_s32): Likewise.
	(vldrwq_gather_base_wb_z_u32): Likewise.
	(vstrdq_scatter_base_wb_p_s64): Likewise.
	(vstrdq_scatter_base_wb_p_u64): Likewise.
	(vstrdq_scatter_base_wb_s64): Likewise.
	(vstrdq_scatter_base_wb_u64): Likewise.
	(vstrwq_scatter_base_wb_p_s32): Likewise.
	(vstrwq_scatter_base_wb_p_f32): Likewise.
	(vstrwq_scatter_base_wb_p_u32): Likewise.
	(vstrwq_scatter_base_wb_s32): Likewise.
	(vstrwq_scatter_base_wb_u32): Likewise.
	(vstrwq_scatter_base_wb_f32): Likewise.
	(__arm_vldrdq_gather_base_wb_s64): Define intrinsic.
	(__arm_vldrdq_gather_base_wb_u64): Likewise.
	(__arm_vldrdq_gather_base_wb_z_s64): Likewise.
	(__arm_vldrdq_gather_base_wb_z_u64): Likewise.
	(__arm_vldrwq_gather_base_wb_s32): Likewise.
	(__arm_vldrwq_gather_base_wb_u32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_s32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_u32): Likewise.
	(__arm_vstrdq_scatter_base_wb_s64): Likewise.
	(__arm_vstrdq_scatter_base_wb_u64): Likewise.
	(__arm_vstrdq_scatter_base_wb_p_s64): Likewise.
	(__arm_vstrdq_scatter_base_wb_p_u64): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_s32): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_u32): Likewise.
	(__arm_vstrwq_scatter_base_wb_s32): Likewise.
	(__arm_vstrwq_scatter_base_wb_u32): Likewise.
	(__arm_vldrwq_gather_base_wb_f32): Likewise.
	(__arm_vldrwq_gather_base_wb_z_f32): Likewise.
	(__arm_vstrwq_scatter_base_wb_f32): Likewise.
	(__arm_vstrwq_scatter_base_wb_p_f32): Likewise.
	(vstrwq_scatter_base_wb): Define polymorphic variant.
	(vstrwq_scatter_base_wb_p): Likewise.
	(vstrdq_scatter_base_wb_p): Likewise.
	(vstrdq_scatter_base_wb): Likewise.
	* config/arm/arm_mve_builtins.def (LDRGBWBS_QUALIFIERS): Use builtin
	qualifier.
	* config/arm/mve.md (mve_vstrwq_scatter_base_wb_<supf>v4si): Define RTL
	pattern.
	(mve_vstrwq_scatter_base_wb_add_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_base_wb_<supf>v4si_insn): Likewise.
	(mve_vstrwq_scatter_base_wb_p_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_base_wb_p_add_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_base_wb_p_<supf>v4si_insn): Likewise.
	(mve_vstrwq_scatter_base_wb_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_add_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_fv4sf_insn): Likewise.
	(mve_vstrwq_scatter_base_wb_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_p_add_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_wb_p_fv4sf_insn): Likewise.
	(mve_vstrdq_scatter_base_wb_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_add_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_<supf>v2di_insn): Likewise.
	(mve_vstrdq_scatter_base_wb_p_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_p_add_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_base_wb_p_<supf>v2di_insn): Likewise.
	(mve_vldrwq_gather_base_wb_<supf>v4si): Likewise.
	(mve_vldrwq_gather_base_wb_<supf>v4si_insn): Likewise.
	(mve_vldrwq_gather_base_wb_z_<supf>v4si): Likewise.
	(mve_vldrwq_gather_base_wb_z_<supf>v4si_insn): Likewise.
	(mve_vldrwq_gather_base_wb_fv4sf): Likewise.
	(mve_vldrwq_gather_base_wb_fv4sf_insn): Likewise.
	(mve_vldrwq_gather_base_wb_z_fv4sf): Likewise.
	(mve_vldrwq_gather_base_wb_z_fv4sf_insn): Likewise.
	(mve_vldrdq_gather_base_wb_<supf>v2di): Likewise.
	(mve_vldrdq_gather_base_wb_<supf>v2di_insn): Likewise.
	(mve_vldrdq_gather_base_wb_z_<supf>v2di): Likewise.
	(mve_vldrdq_gather_base_wb_z_<supf>v2di_insn): Likewise.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm-builtins.c
	(QUINOP_UNONE_UNONE_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Define quinary
	builtin qualifier.
	* config/arm/arm_mve.h (vddupq_m_n_u8): Define macro.
	(vddupq_m_n_u32): Likewise.
	(vddupq_m_n_u16): Likewise.
	(vddupq_m_wb_u8): Likewise.
	(vddupq_m_wb_u16): Likewise.
	(vddupq_m_wb_u32): Likewise.
	(vddupq_n_u8): Likewise.
	(vddupq_n_u32): Likewise.
	(vddupq_n_u16): Likewise.
	(vddupq_wb_u8): Likewise.
	(vddupq_wb_u16): Likewise.
	(vddupq_wb_u32): Likewise.
	(vdwdupq_m_n_u8): Likewise.
	(vdwdupq_m_n_u32): Likewise.
	(vdwdupq_m_n_u16): Likewise.
	(vdwdupq_m_wb_u8): Likewise.
	(vdwdupq_m_wb_u32): Likewise.
	(vdwdupq_m_wb_u16): Likewise.
	(vdwdupq_n_u8): Likewise.
	(vdwdupq_n_u32): Likewise.
	(vdwdupq_n_u16): Likewise.
	(vdwdupq_wb_u8): Likewise.
	(vdwdupq_wb_u32): Likewise.
	(vdwdupq_wb_u16): Likewise.
	(vidupq_m_n_u8): Likewise.
	(vidupq_m_n_u32): Likewise.
	(vidupq_m_n_u16): Likewise.
	(vidupq_m_wb_u8): Likewise.
	(vidupq_m_wb_u16): Likewise.
	(vidupq_m_wb_u32): Likewise.
	(vidupq_n_u8): Likewise.
	(vidupq_n_u32): Likewise.
	(vidupq_n_u16): Likewise.
	(vidupq_wb_u8): Likewise.
	(vidupq_wb_u16): Likewise.
	(vidupq_wb_u32): Likewise.
	(viwdupq_m_n_u8): Likewise.
	(viwdupq_m_n_u32): Likewise.
	(viwdupq_m_n_u16): Likewise.
	(viwdupq_m_wb_u8): Likewise.
	(viwdupq_m_wb_u32): Likewise.
	(viwdupq_m_wb_u16): Likewise.
	(viwdupq_n_u8): Likewise.
	(viwdupq_n_u32): Likewise.
	(viwdupq_n_u16): Likewise.
	(viwdupq_wb_u8): Likewise.
	(viwdupq_wb_u32): Likewise.
	(viwdupq_wb_u16): Likewise.
	(__arm_vddupq_m_n_u8): Define intrinsic.
	(__arm_vddupq_m_n_u32): Likewise.
	(__arm_vddupq_m_n_u16): Likewise.
	(__arm_vddupq_m_wb_u8): Likewise.
	(__arm_vddupq_m_wb_u16): Likewise.
	(__arm_vddupq_m_wb_u32): Likewise.
	(__arm_vddupq_n_u8): Likewise.
	(__arm_vddupq_n_u32): Likewise.
	(__arm_vddupq_n_u16): Likewise.
	(__arm_vdwdupq_m_n_u8): Likewise.
	(__arm_vdwdupq_m_n_u32): Likewise.
	(__arm_vdwdupq_m_n_u16): Likewise.
	(__arm_vdwdupq_m_wb_u8): Likewise.
	(__arm_vdwdupq_m_wb_u32): Likewise.
	(__arm_vdwdupq_m_wb_u16): Likewise.
	(__arm_vdwdupq_n_u8): Likewise.
	(__arm_vdwdupq_n_u32): Likewise.
	(__arm_vdwdupq_n_u16): Likewise.
	(__arm_vdwdupq_wb_u8): Likewise.
	(__arm_vdwdupq_wb_u32): Likewise.
	(__arm_vdwdupq_wb_u16): Likewise.
	(__arm_vidupq_m_n_u8): Likewise.
	(__arm_vidupq_m_n_u32): Likewise.
	(__arm_vidupq_m_n_u16): Likewise.
	(__arm_vidupq_n_u8): Likewise.
	(__arm_vidupq_m_wb_u8): Likewise.
	(__arm_vidupq_m_wb_u16): Likewise.
	(__arm_vidupq_m_wb_u32): Likewise.
	(__arm_vidupq_n_u32): Likewise.
	(__arm_vidupq_n_u16): Likewise.
	(__arm_vidupq_wb_u8): Likewise.
	(__arm_vidupq_wb_u16): Likewise.
	(__arm_vidupq_wb_u32): Likewise.
	(__arm_vddupq_wb_u8): Likewise.
	(__arm_vddupq_wb_u16): Likewise.
	(__arm_vddupq_wb_u32): Likewise.
	(__arm_viwdupq_m_n_u8): Likewise.
	(__arm_viwdupq_m_n_u32): Likewise.
	(__arm_viwdupq_m_n_u16): Likewise.
	(__arm_viwdupq_m_wb_u8): Likewise.
	(__arm_viwdupq_m_wb_u32): Likewise.
	(__arm_viwdupq_m_wb_u16): Likewise.
	(__arm_viwdupq_n_u8): Likewise.
	(__arm_viwdupq_n_u32): Likewise.
	(__arm_viwdupq_n_u16): Likewise.
	(__arm_viwdupq_wb_u8): Likewise.
	(__arm_viwdupq_wb_u32): Likewise.
	(__arm_viwdupq_wb_u16): Likewise.
	(vidupq_m): Define polymorphic variant.
	(vddupq_m): Likewise.
	(vidupq_u16): Likewise.
	(vidupq_u32): Likewise.
	(vidupq_u8): Likewise.
	(vddupq_u16): Likewise.
	(vddupq_u32): Likewise.
	(vddupq_u8): Likewise.
	(viwdupq_m): Likewise.
	(viwdupq_u16): Likewise.
	(viwdupq_u32): Likewise.
	(viwdupq_u8): Likewise.
	(vdwdupq_m): Likewise.
	(vdwdupq_u16): Likewise.
	(vdwdupq_u32): Likewise.
	(vdwdupq_u8): Likewise.
	* config/arm/arm_mve_builtins.def
	(QUINOP_UNONE_UNONE_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Use builtin
	qualifier.
	* config/arm/mve.md (mve_vidupq_n_u<mode>): Define RTL pattern.
	(mve_vidupq_u<mode>_insn): Likewise.
	(mve_vidupq_m_n_u<mode>): Likewise.
	(mve_vidupq_m_wb_u<mode>_insn): Likewise.
	(mve_vddupq_n_u<mode>): Likewise.
	(mve_vddupq_u<mode>_insn): Likewise.
	(mve_vddupq_m_n_u<mode>): Likewise.
	(mve_vddupq_m_wb_u<mode>_insn): Likewise.
	(mve_vdwdupq_n_u<mode>): Likewise.
	(mve_vdwdupq_wb_u<mode>): Likewise.
	(mve_vdwdupq_wb_u<mode>_insn): Likewise.
	(mve_vdwdupq_m_n_u<mode>): Likewise.
	(mve_vdwdupq_m_wb_u<mode>): Likewise.
	(mve_vdwdupq_m_wb_u<mode>_insn): Likewise.
	(mve_viwdupq_n_u<mode>): Likewise.
	(mve_viwdupq_wb_u<mode>): Likewise.
	(mve_viwdupq_wb_u<mode>_insn): Likewise.
	(mve_viwdupq_m_n_u<mode>): Likewise.
	(mve_viwdupq_m_wb_u<mode>): Likewise.
	(mve_viwdupq_m_wb_u<mode>_insn): Likewise.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vreinterpretq_s16_s32): Define macro.
	(vreinterpretq_s16_s64): Likewise.
	(vreinterpretq_s16_s8): Likewise.
	(vreinterpretq_s16_u16): Likewise.
	(vreinterpretq_s16_u32): Likewise.
	(vreinterpretq_s16_u64): Likewise.
	(vreinterpretq_s16_u8): Likewise.
	(vreinterpretq_s32_s16): Likewise.
	(vreinterpretq_s32_s64): Likewise.
	(vreinterpretq_s32_s8): Likewise.
	(vreinterpretq_s32_u16): Likewise.
	(vreinterpretq_s32_u32): Likewise.
	(vreinterpretq_s32_u64): Likewise.
	(vreinterpretq_s32_u8): Likewise.
	(vreinterpretq_s64_s16): Likewise.
	(vreinterpretq_s64_s32): Likewise.
	(vreinterpretq_s64_s8): Likewise.
	(vreinterpretq_s64_u16): Likewise.
	(vreinterpretq_s64_u32): Likewise.
	(vreinterpretq_s64_u64): Likewise.
	(vreinterpretq_s64_u8): Likewise.
	(vreinterpretq_s8_s16): Likewise.
	(vreinterpretq_s8_s32): Likewise.
	(vreinterpretq_s8_s64): Likewise.
	(vreinterpretq_s8_u16): Likewise.
	(vreinterpretq_s8_u32): Likewise.
	(vreinterpretq_s8_u64): Likewise.
	(vreinterpretq_s8_u8): Likewise.
	(vreinterpretq_u16_s16): Likewise.
	(vreinterpretq_u16_s32): Likewise.
	(vreinterpretq_u16_s64): Likewise.
	(vreinterpretq_u16_s8): Likewise.
	(vreinterpretq_u16_u32): Likewise.
	(vreinterpretq_u16_u64): Likewise.
	(vreinterpretq_u16_u8): Likewise.
	(vreinterpretq_u32_s16): Likewise.
	(vreinterpretq_u32_s32): Likewise.
	(vreinterpretq_u32_s64): Likewise.
	(vreinterpretq_u32_s8): Likewise.
	(vreinterpretq_u32_u16): Likewise.
	(vreinterpretq_u32_u64): Likewise.
	(vreinterpretq_u32_u8): Likewise.
	(vreinterpretq_u64_s16): Likewise.
	(vreinterpretq_u64_s32): Likewise.
	(vreinterpretq_u64_s64): Likewise.
	(vreinterpretq_u64_s8): Likewise.
	(vreinterpretq_u64_u16): Likewise.
	(vreinterpretq_u64_u32): Likewise.
	(vreinterpretq_u64_u8): Likewise.
	(vreinterpretq_u8_s16): Likewise.
	(vreinterpretq_u8_s32): Likewise.
	(vreinterpretq_u8_s64): Likewise.
	(vreinterpretq_u8_s8): Likewise.
	(vreinterpretq_u8_u16): Likewise.
	(vreinterpretq_u8_u32): Likewise.
	(vreinterpretq_u8_u64): Likewise.
	(vreinterpretq_s32_f16): Likewise.
	(vreinterpretq_s32_f32): Likewise.
	(vreinterpretq_u16_f16): Likewise.
	(vreinterpretq_u16_f32): Likewise.
	(vreinterpretq_u32_f16): Likewise.
	(vreinterpretq_u32_f32): Likewise.
	(vreinterpretq_u64_f16): Likewise.
	(vreinterpretq_u64_f32): Likewise.
	(vreinterpretq_u8_f16): Likewise.
	(vreinterpretq_u8_f32): Likewise.
	(vreinterpretq_f16_f32): Likewise.
	(vreinterpretq_f16_s16): Likewise.
	(vreinterpretq_f16_s32): Likewise.
	(vreinterpretq_f16_s64): Likewise.
	(vreinterpretq_f16_s8): Likewise.
	(vreinterpretq_f16_u16): Likewise.
	(vreinterpretq_f16_u32): Likewise.
	(vreinterpretq_f16_u64): Likewise.
	(vreinterpretq_f16_u8): Likewise.
	(vreinterpretq_f32_f16): Likewise.
	(vreinterpretq_f32_s16): Likewise.
	(vreinterpretq_f32_s32): Likewise.
	(vreinterpretq_f32_s64): Likewise.
	(vreinterpretq_f32_s8): Likewise.
	(vreinterpretq_f32_u16): Likewise.
	(vreinterpretq_f32_u32): Likewise.
	(vreinterpretq_f32_u64): Likewise.
	(vreinterpretq_f32_u8): Likewise.
	(vreinterpretq_s16_f16): Likewise.
	(vreinterpretq_s16_f32): Likewise.
	(vreinterpretq_s64_f16): Likewise.
	(vreinterpretq_s64_f32): Likewise.
	(vreinterpretq_s8_f16): Likewise.
	(vreinterpretq_s8_f32): Likewise.
	(vuninitializedq_u8): Likewise.
	(vuninitializedq_u16): Likewise.
	(vuninitializedq_u32): Likewise.
	(vuninitializedq_u64): Likewise.
	(vuninitializedq_s8): Likewise.
	(vuninitializedq_s16): Likewise.
	(vuninitializedq_s32): Likewise.
	(vuninitializedq_s64): Likewise.
	(vuninitializedq_f16): Likewise.
	(vuninitializedq_f32): Likewise.
	(__arm_vuninitializedq_u8): Define intrinsic.
	(__arm_vuninitializedq_u16): Likewise.
	(__arm_vuninitializedq_u32): Likewise.
	(__arm_vuninitializedq_u64): Likewise.
	(__arm_vuninitializedq_s8): Likewise.
	(__arm_vuninitializedq_s16): Likewise.
	(__arm_vuninitializedq_s32): Likewise.
	(__arm_vuninitializedq_s64): Likewise.
	(__arm_vreinterpretq_s16_s32): Likewise.
	(__arm_vreinterpretq_s16_s64): Likewise.
	(__arm_vreinterpretq_s16_s8): Likewise.
	(__arm_vreinterpretq_s16_u16): Likewise.
	(__arm_vreinterpretq_s16_u32): Likewise.
	(__arm_vreinterpretq_s16_u64): Likewise.
	(__arm_vreinterpretq_s16_u8): Likewise.
	(__arm_vreinterpretq_s32_s16): Likewise.
	(__arm_vreinterpretq_s32_s64): Likewise.
	(__arm_vreinterpretq_s32_s8): Likewise.
	(__arm_vreinterpretq_s32_u16): Likewise.
	(__arm_vreinterpretq_s32_u32): Likewise.
	(__arm_vreinterpretq_s32_u64): Likewise.
	(__arm_vreinterpretq_s32_u8): Likewise.
	(__arm_vreinterpretq_s64_s16): Likewise.
	(__arm_vreinterpretq_s64_s32): Likewise.
	(__arm_vreinterpretq_s64_s8): Likewise.
	(__arm_vreinterpretq_s64_u16): Likewise.
	(__arm_vreinterpretq_s64_u32): Likewise.
	(__arm_vreinterpretq_s64_u64): Likewise.
	(__arm_vreinterpretq_s64_u8): Likewise.
	(__arm_vreinterpretq_s8_s16): Likewise.
	(__arm_vreinterpretq_s8_s32): Likewise.
	(__arm_vreinterpretq_s8_s64): Likewise.
	(__arm_vreinterpretq_s8_u16): Likewise.
	(__arm_vreinterpretq_s8_u32): Likewise.
	(__arm_vreinterpretq_s8_u64): Likewise.
	(__arm_vreinterpretq_s8_u8): Likewise.
	(__arm_vreinterpretq_u16_s16): Likewise.
	(__arm_vreinterpretq_u16_s32): Likewise.
	(__arm_vreinterpretq_u16_s64): Likewise.
	(__arm_vreinterpretq_u16_s8): Likewise.
	(__arm_vreinterpretq_u16_u32): Likewise.
	(__arm_vreinterpretq_u16_u64): Likewise.
	(__arm_vreinterpretq_u16_u8): Likewise.
	(__arm_vreinterpretq_u32_s16): Likewise.
	(__arm_vreinterpretq_u32_s32): Likewise.
	(__arm_vreinterpretq_u32_s64): Likewise.
	(__arm_vreinterpretq_u32_s8): Likewise.
	(__arm_vreinterpretq_u32_u16): Likewise.
	(__arm_vreinterpretq_u32_u64): Likewise.
	(__arm_vreinterpretq_u32_u8): Likewise.
	(__arm_vreinterpretq_u64_s16): Likewise.
	(__arm_vreinterpretq_u64_s32): Likewise.
	(__arm_vreinterpretq_u64_s64): Likewise.
	(__arm_vreinterpretq_u64_s8): Likewise.
	(__arm_vreinterpretq_u64_u16): Likewise.
	(__arm_vreinterpretq_u64_u32): Likewise.
	(__arm_vreinterpretq_u64_u8): Likewise.
	(__arm_vreinterpretq_u8_s16): Likewise.
	(__arm_vreinterpretq_u8_s32): Likewise.
	(__arm_vreinterpretq_u8_s64): Likewise.
	(__arm_vreinterpretq_u8_s8): Likewise.
	(__arm_vreinterpretq_u8_u16): Likewise.
	(__arm_vreinterpretq_u8_u32): Likewise.
	(__arm_vreinterpretq_u8_u64): Likewise.
	(__arm_vuninitializedq_f16): Likewise.
	(__arm_vuninitializedq_f32): Likewise.
	(__arm_vreinterpretq_s32_f16): Likewise.
	(__arm_vreinterpretq_s32_f32): Likewise.
	(__arm_vreinterpretq_s16_f16): Likewise.
	(__arm_vreinterpretq_s16_f32): Likewise.
	(__arm_vreinterpretq_s64_f16): Likewise.
	(__arm_vreinterpretq_s64_f32): Likewise.
	(__arm_vreinterpretq_s8_f16): Likewise.
	(__arm_vreinterpretq_s8_f32): Likewise.
	(__arm_vreinterpretq_u16_f16): Likewise.
	(__arm_vreinterpretq_u16_f32): Likewise.
	(__arm_vreinterpretq_u32_f16): Likewise.
	(__arm_vreinterpretq_u32_f32): Likewise.
	(__arm_vreinterpretq_u64_f16): Likewise.
	(__arm_vreinterpretq_u64_f32): Likewise.
	(__arm_vreinterpretq_u8_f16): Likewise.
	(__arm_vreinterpretq_u8_f32): Likewise.
	(__arm_vreinterpretq_f16_f32): Likewise.
	(__arm_vreinterpretq_f16_s16): Likewise.
	(__arm_vreinterpretq_f16_s32): Likewise.
	(__arm_vreinterpretq_f16_s64): Likewise.
	(__arm_vreinterpretq_f16_s8): Likewise.
	(__arm_vreinterpretq_f16_u16): Likewise.
	(__arm_vreinterpretq_f16_u32): Likewise.
	(__arm_vreinterpretq_f16_u64): Likewise.
	(__arm_vreinterpretq_f16_u8): Likewise.
	(__arm_vreinterpretq_f32_f16): Likewise.
	(__arm_vreinterpretq_f32_s16): Likewise.
	(__arm_vreinterpretq_f32_s32): Likewise.
	(__arm_vreinterpretq_f32_s64): Likewise.
	(__arm_vreinterpretq_f32_s8): Likewise.
	(__arm_vreinterpretq_f32_u16): Likewise.
	(__arm_vreinterpretq_f32_u32): Likewise.
	(__arm_vreinterpretq_f32_u64): Likewise.
	(__arm_vreinterpretq_f32_u8): Likewise.
	(vuninitializedq): Define polymorphic variant.
	(vreinterpretq_f16): Likewise.
	(vreinterpretq_f32): Likewise.
	(vreinterpretq_s16): Likewise.
	(vreinterpretq_s32): Likewise.
	(vreinterpretq_s64): Likewise.
	(vreinterpretq_s8): Likewise.
	(vreinterpretq_u16): Likewise.
	(vreinterpretq_u32): Likewise.
	(vreinterpretq_u64): Likewise.
	(vreinterpretq_u8): Likewise.

2020-03-20  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
            Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm_mve.h (vaddq_s8): Define macro.
	(vaddq_s16): Likewise.
	(vaddq_s32): Likewise.
	(vaddq_u8): Likewise.
	(vaddq_u16): Likewise.
	(vaddq_u32): Likewise.
	(vaddq_f16): Likewise.
	(vaddq_f32): Likewise.
	(__arm_vaddq_s8): Define intrinsic.
	(__arm_vaddq_s16): Likewise.
	(__arm_vaddq_s32): Likewise.
	(__arm_vaddq_u8): Likewise.
	(__arm_vaddq_u16): Likewise.
	(__arm_vaddq_u32): Likewise.
	(__arm_vaddq_f16): Likewise.
	(__arm_vaddq_f32): Likewise.
	(vaddq): Define polymorphic variant.
	* config/arm/iterators.md (VNIM): Define mode iterator for common types
	Neon, IWMMXT and MVE.
	(VNINOTM): Likewise.
	* config/arm/mve.md (mve_vaddq<mode>): Define RTL pattern.
	(mve_vaddq_f<mode>): Define RTL pattern.
	* config/arm/neon.md (add<mode>3): Rename to addv4hf3 RTL pattern.
	(addv8hf3_neon): Define RTL pattern.
	* config/arm/vec-common.md (add<mode>3): Modify standard add RTL pattern
	to support MVE.
	(addv8hf3): Define standard RTL pattern for MVE and Neon.
	(add<mode>3): Modify existing standard add RTL pattern for Neon and IWMMXT.

2020-03-20  Martin Liska  <mliska@suse.cz>

	PR ipa/94232
	* ipa-cp.c (ipa_get_jf_ancestor_result): Use offset in bytes. Previously
	build_ref_for_offset function was used and it transforms off to bytes
	from bits.

2020-03-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94266
	* gimple-ssa-sprintf.c (get_origin_and_offset): Use the
	type of the underlying object to adjust for the containing
	field if available.

2020-03-20  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/unspecs.md (UNSPEC_GET_FPSCR): Rename this to ...
	(VUNSPEC_GET_FPSCR): ... this, and move it to vunspec.
	* config/arm/vfp.md: (get_fpscr, set_fpscr): Revert to old patterns.

2020-03-20  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/mve.md (mve_mov<mode>): Fix R->R case.

2020-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94224
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::coalesce_immediate): Don't consider overlapping
	or adjacent INTEGER_CST rhs_code stores as mergeable if they have
	different lp_nr.

2020-03-20  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.md (define_attr "conds"): Fix logic for neon and mve.

2020-03-19  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/94202
	* cgraph.c (cgraph_node::function_symbol): Fix availability computation.
	(cgraph_node::function_or_virtual_thunk_symbol): Likewise.

2020-03-19  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/92372
	* cgraphunit.c (process_function_and_variable_attributes): warn
	for flatten attribute on alias.
	* ipa-inline.c (ipa_inline): Do not ICE on flatten attribute on alias.

2020-03-19  Martin Liska  <mliska@suse.cz>

	* lto-section-in.c: Add ext_symtab.
	* lto-streamer-out.c (write_symbol_extension_info): New.
	(produce_symtab_extension): New.
	(produce_asm_for_decls): Stream also produce_symtab_extension.
	* lto-streamer.h (enum lto_section_type): New section.

2020-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94211
	* tree-ssa-phiopt.c (value_replacement): Use estimate_num_insns_seq
	instead of estimate_num_insns for bb_seq (middle_bb).  Rename
	emtpy_or_with_defined_p variable to empty_or_with_defined_p, adjust
	all uses.

2020-03-19  Richard Biener  <rguenther@suse.de>

	PR ipa/94217
	* ipa-cp.c (ipa_get_jf_ancestor_result): Avoid build_fold_addr_expr
	and build_ref_for_offset.

2020-03-19  Richard Biener  <rguenther@suse.de>

	PR middle-end/94216
	* fold-const.c (fold_binary_loc): Avoid using
	build_fold_addr_expr when we really want an ADDR_EXPR.

2020-03-18  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (wd, wf, wi, ws, ww): New undocumented
	aliases for "wa".

2020-03-12  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/90275
	* cse.c (cse_insn): Delete no-op register moves too.

2020-03-18  Martin Sebor  <msebor@redhat.com>

	PR ipa/92799
	* cgraphunit.c (process_function_and_variable_attributes): Also
	complain about weakref function definitions and drop all effects
	of the attribute.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vstrdq_scatter_base_p_s64): Define macro.
	(vstrdq_scatter_base_p_u64): Likewise.
	(vstrdq_scatter_base_s64): Likewise.
	(vstrdq_scatter_base_u64): Likewise.
	(vstrdq_scatter_offset_p_s64): Likewise.
	(vstrdq_scatter_offset_p_u64): Likewise.
	(vstrdq_scatter_offset_s64): Likewise.
	(vstrdq_scatter_offset_u64): Likewise.
	(vstrdq_scatter_shifted_offset_p_s64): Likewise.
	(vstrdq_scatter_shifted_offset_p_u64): Likewise.
	(vstrdq_scatter_shifted_offset_s64): Likewise.
	(vstrdq_scatter_shifted_offset_u64): Likewise.
	(vstrhq_scatter_offset_f16): Likewise.
	(vstrhq_scatter_offset_p_f16): Likewise.
	(vstrhq_scatter_shifted_offset_f16): Likewise.
	(vstrhq_scatter_shifted_offset_p_f16): Likewise.
	(vstrwq_scatter_base_f32): Likewise.
	(vstrwq_scatter_base_p_f32): Likewise.
	(vstrwq_scatter_offset_f32): Likewise.
	(vstrwq_scatter_offset_p_f32): Likewise.
	(vstrwq_scatter_offset_p_s32): Likewise.
	(vstrwq_scatter_offset_p_u32): Likewise.
	(vstrwq_scatter_offset_s32): Likewise.
	(vstrwq_scatter_offset_u32): Likewise.
	(vstrwq_scatter_shifted_offset_f32): Likewise.
	(vstrwq_scatter_shifted_offset_p_f32): Likewise.
	(vstrwq_scatter_shifted_offset_p_s32): Likewise.
	(vstrwq_scatter_shifted_offset_p_u32): Likewise.
	(vstrwq_scatter_shifted_offset_s32): Likewise.
	(vstrwq_scatter_shifted_offset_u32): Likewise.
	(__arm_vstrdq_scatter_base_p_s64): Define intrinsic.
	(__arm_vstrdq_scatter_base_p_u64): Likewise.
	(__arm_vstrdq_scatter_base_s64): Likewise.
	(__arm_vstrdq_scatter_base_u64): Likewise.
	(__arm_vstrdq_scatter_offset_p_s64): Likewise.
	(__arm_vstrdq_scatter_offset_p_u64): Likewise.
	(__arm_vstrdq_scatter_offset_s64): Likewise.
	(__arm_vstrdq_scatter_offset_u64): Likewise.
	(__arm_vstrdq_scatter_shifted_offset_p_s64): Likewise.
	(__arm_vstrdq_scatter_shifted_offset_p_u64): Likewise.
	(__arm_vstrdq_scatter_shifted_offset_s64): Likewise.
	(__arm_vstrdq_scatter_shifted_offset_u64): Likewise.
	(__arm_vstrwq_scatter_offset_p_s32): Likewise.
	(__arm_vstrwq_scatter_offset_p_u32): Likewise.
	(__arm_vstrwq_scatter_offset_s32): Likewise.
	(__arm_vstrwq_scatter_offset_u32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_p_s32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_p_u32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_s32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_u32): Likewise.
	(__arm_vstrhq_scatter_offset_f16): Likewise.
	(__arm_vstrhq_scatter_offset_p_f16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_f16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_p_f16): Likewise.
	(__arm_vstrwq_scatter_base_f32): Likewise.
	(__arm_vstrwq_scatter_base_p_f32): Likewise.
	(__arm_vstrwq_scatter_offset_f32): Likewise.
	(__arm_vstrwq_scatter_offset_p_f32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_f32): Likewise.
	(__arm_vstrwq_scatter_shifted_offset_p_f32): Likewise.
	(vstrhq_scatter_offset): Define polymorphic variant.
	(vstrhq_scatter_offset_p): Likewise.
	(vstrhq_scatter_shifted_offset): Likewise.
	(vstrhq_scatter_shifted_offset_p): Likewise.
	(vstrwq_scatter_base): Likewise.
	(vstrwq_scatter_base_p): Likewise.
	(vstrwq_scatter_offset): Likewise.
	(vstrwq_scatter_offset_p): Likewise.
	(vstrwq_scatter_shifted_offset): Likewise.
	(vstrwq_scatter_shifted_offset_p): Likewise.
	(vstrdq_scatter_base_p): Likewise.
	(vstrdq_scatter_base): Likewise.
	(vstrdq_scatter_offset_p): Likewise.
	(vstrdq_scatter_offset): Likewise.
	(vstrdq_scatter_shifted_offset_p): Likewise.
	(vstrdq_scatter_shifted_offset): Likewise.
	* config/arm/arm_mve_builtins.def (STRSBS): Use builtin qualifier.
	(STRSBS_P): Likewise.
	(STRSBU): Likewise.
	(STRSBU_P): Likewise.
	(STRSS): Likewise.
	(STRSS_P): Likewise.
	(STRSU): Likewise.
	(STRSU_P): Likewise.
	* config/arm/constraints.md (Ri): Define.
	* config/arm/mve.md (VSTRDSBQ): Define iterator.
	(VSTRDSOQ): Likewise.
	(VSTRDSSOQ): Likewise.
	(VSTRWSOQ): Likewise.
	(VSTRWSSOQ): Likewise.
	(mve_vstrdq_scatter_base_p_<supf>v2di): Define RTL pattern.
	(mve_vstrdq_scatter_base_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_offset_p_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_offset_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_shifted_offset_p_<supf>v2di): Likewise.
	(mve_vstrdq_scatter_shifted_offset_<supf>v2di): Likewise.
	(mve_vstrhq_scatter_offset_fv8hf): Likewise.
	(mve_vstrhq_scatter_offset_p_fv8hf): Likewise.
	(mve_vstrhq_scatter_shifted_offset_fv8hf): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_fv8hf): Likewise.
	(mve_vstrwq_scatter_base_fv4sf): Likewise.
	(mve_vstrwq_scatter_base_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_offset_fv4sf): Likewise.
	(mve_vstrwq_scatter_offset_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_offset_p_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_offset_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_shifted_offset_fv4sf): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_fv4sf): Likewise.
	(mve_vstrwq_scatter_shifted_offset_p_<supf>v4si): Likewise.
	(mve_vstrwq_scatter_shifted_offset_<supf>v4si): Likewise.
	* config/arm/predicates.md (Ri): Define predicate to check immediate
	is the range +/-1016 and multiple of 8.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vst1q_f32): Define macro.
	(vst1q_f16): Likewise.
	(vst1q_s8): Likewise.
	(vst1q_s32): Likewise.
	(vst1q_s16): Likewise.
	(vst1q_u8): Likewise.
	(vst1q_u32): Likewise.
	(vst1q_u16): Likewise.
	(vstrhq_f16): Likewise.
	(vstrhq_scatter_offset_s32): Likewise.
	(vstrhq_scatter_offset_s16): Likewise.
	(vstrhq_scatter_offset_u32): Likewise.
	(vstrhq_scatter_offset_u16): Likewise.
	(vstrhq_scatter_offset_p_s32): Likewise.
	(vstrhq_scatter_offset_p_s16): Likewise.
	(vstrhq_scatter_offset_p_u32): Likewise.
	(vstrhq_scatter_offset_p_u16): Likewise.
	(vstrhq_scatter_shifted_offset_s32): Likewise.
	(vstrhq_scatter_shifted_offset_s16): Likewise.
	(vstrhq_scatter_shifted_offset_u32): Likewise.
	(vstrhq_scatter_shifted_offset_u16): Likewise.
	(vstrhq_scatter_shifted_offset_p_s32): Likewise.
	(vstrhq_scatter_shifted_offset_p_s16): Likewise.
	(vstrhq_scatter_shifted_offset_p_u32): Likewise.
	(vstrhq_scatter_shifted_offset_p_u16): Likewise.
	(vstrhq_s32): Likewise.
	(vstrhq_s16): Likewise.
	(vstrhq_u32): Likewise.
	(vstrhq_u16): Likewise.
	(vstrhq_p_f16): Likewise.
	(vstrhq_p_s32): Likewise.
	(vstrhq_p_s16): Likewise.
	(vstrhq_p_u32): Likewise.
	(vstrhq_p_u16): Likewise.
	(vstrwq_f32): Likewise.
	(vstrwq_s32): Likewise.
	(vstrwq_u32): Likewise.
	(vstrwq_p_f32): Likewise.
	(vstrwq_p_s32): Likewise.
	(vstrwq_p_u32): Likewise.
	(__arm_vst1q_s8): Define intrinsic.
	(__arm_vst1q_s32): Likewise.
	(__arm_vst1q_s16): Likewise.
	(__arm_vst1q_u8): Likewise.
	(__arm_vst1q_u32): Likewise.
	(__arm_vst1q_u16): Likewise.
	(__arm_vstrhq_scatter_offset_s32): Likewise.
	(__arm_vstrhq_scatter_offset_s16): Likewise.
	(__arm_vstrhq_scatter_offset_u32): Likewise.
	(__arm_vstrhq_scatter_offset_u16): Likewise.
	(__arm_vstrhq_scatter_offset_p_s32): Likewise.
	(__arm_vstrhq_scatter_offset_p_s16): Likewise.
	(__arm_vstrhq_scatter_offset_p_u32): Likewise.
	(__arm_vstrhq_scatter_offset_p_u16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_s32): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_s16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_u32): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_u16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_p_s32): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_p_s16): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_p_u32): Likewise.
	(__arm_vstrhq_scatter_shifted_offset_p_u16): Likewise.
	(__arm_vstrhq_s32): Likewise.
	(__arm_vstrhq_s16): Likewise.
	(__arm_vstrhq_u32): Likewise.
	(__arm_vstrhq_u16): Likewise.
	(__arm_vstrhq_p_s32): Likewise.
	(__arm_vstrhq_p_s16): Likewise.
	(__arm_vstrhq_p_u32): Likewise.
	(__arm_vstrhq_p_u16): Likewise.
	(__arm_vstrwq_s32): Likewise.
	(__arm_vstrwq_u32): Likewise.
	(__arm_vstrwq_p_s32): Likewise.
	(__arm_vstrwq_p_u32): Likewise.
	(__arm_vstrwq_p_f32): Likewise.
	(__arm_vstrwq_f32): Likewise.
	(__arm_vst1q_f32): Likewise.
	(__arm_vst1q_f16): Likewise.
	(__arm_vstrhq_f16): Likewise.
	(__arm_vstrhq_p_f16): Likewise.
	(vst1q): Define polymorphic variant.
	(vstrhq): Likewise.
	(vstrhq_p): Likewise.
	(vstrhq_scatter_offset_p): Likewise.
	(vstrhq_scatter_offset): Likewise.
	(vstrhq_scatter_shifted_offset_p): Likewise.
	(vstrhq_scatter_shifted_offset): Likewise.
	(vstrwq_p): Likewise.
	(vstrwq): Likewise.
	* config/arm/arm_mve_builtins.def (STRS): Use builtin qualifier.
	(STRS_P): Likewise.
	(STRSS): Likewise.
	(STRSS_P): Likewise.
	(STRSU): Likewise.
	(STRSU_P): Likewise.
	(STRU): Likewise.
	(STRU_P): Likewise.
	* config/arm/mve.md (VST1Q): Define iterator.
	(VSTRHSOQ): Likewise.
	(VSTRHSSOQ): Likewise.
	(VSTRHQ): Likewise.
	(VSTRWQ): Likewise.
	(mve_vstrhq_fv8hf): Define RTL pattern.
	(mve_vstrhq_p_fv8hf): Likewise.
	(mve_vstrhq_p_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_offset_p_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_offset_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_shifted_offset_p_<supf><mode>): Likewise.
	(mve_vstrhq_scatter_shifted_offset_<supf><mode>): Likewise.
	(mve_vstrhq_<supf><mode>): Likewise.
	(mve_vstrwq_fv4sf): Likewise.
	(mve_vstrwq_p_fv4sf): Likewise.
	(mve_vstrwq_p_<supf>v4si): Likewise.
	(mve_vstrwq_<supf>v4si): Likewise.
	(mve_vst1q_f<mode>): Define expand.
	(mve_vst1q_<supf><mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vld1q_s8): Define macro.
	(vld1q_s32): Likewise.
	(vld1q_s16): Likewise.
	(vld1q_u8): Likewise.
	(vld1q_u32): Likewise.
	(vld1q_u16): Likewise.
	(vldrhq_gather_offset_s32): Likewise.
	(vldrhq_gather_offset_s16): Likewise.
	(vldrhq_gather_offset_u32): Likewise.
	(vldrhq_gather_offset_u16): Likewise.
	(vldrhq_gather_offset_z_s32): Likewise.
	(vldrhq_gather_offset_z_s16): Likewise.
	(vldrhq_gather_offset_z_u32): Likewise.
	(vldrhq_gather_offset_z_u16): Likewise.
	(vldrhq_gather_shifted_offset_s32): Likewise.
	(vldrhq_gather_shifted_offset_s16): Likewise.
	(vldrhq_gather_shifted_offset_u32): Likewise.
	(vldrhq_gather_shifted_offset_u16): Likewise.
	(vldrhq_gather_shifted_offset_z_s32): Likewise.
	(vldrhq_gather_shifted_offset_z_s16): Likewise.
	(vldrhq_gather_shifted_offset_z_u32): Likewise.
	(vldrhq_gather_shifted_offset_z_u16): Likewise.
	(vldrhq_s32): Likewise.
	(vldrhq_s16): Likewise.
	(vldrhq_u32): Likewise.
	(vldrhq_u16): Likewise.
	(vldrhq_z_s32): Likewise.
	(vldrhq_z_s16): Likewise.
	(vldrhq_z_u32): Likewise.
	(vldrhq_z_u16): Likewise.
	(vldrwq_s32): Likewise.
	(vldrwq_u32): Likewise.
	(vldrwq_z_s32): Likewise.
	(vldrwq_z_u32): Likewise.
	(vld1q_f32): Likewise.
	(vld1q_f16): Likewise.
	(vldrhq_f16): Likewise.
	(vldrhq_z_f16): Likewise.
	(vldrwq_f32): Likewise.
	(vldrwq_z_f32): Likewise.
	(__arm_vld1q_s8): Define intrinsic.
	(__arm_vld1q_s32): Likewise.
	(__arm_vld1q_s16): Likewise.
	(__arm_vld1q_u8): Likewise.
	(__arm_vld1q_u32): Likewise.
	(__arm_vld1q_u16): Likewise.
	(__arm_vldrhq_gather_offset_s32): Likewise.
	(__arm_vldrhq_gather_offset_s16): Likewise.
	(__arm_vldrhq_gather_offset_u32): Likewise.
	(__arm_vldrhq_gather_offset_u16): Likewise.
	(__arm_vldrhq_gather_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_offset_z_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u16): Likewise.
	(__arm_vldrhq_s32): Likewise.
	(__arm_vldrhq_s16): Likewise.
	(__arm_vldrhq_u32): Likewise.
	(__arm_vldrhq_u16): Likewise.
	(__arm_vldrhq_z_s32): Likewise.
	(__arm_vldrhq_z_s16): Likewise.
	(__arm_vldrhq_z_u32): Likewise.
	(__arm_vldrhq_z_u16): Likewise.
	(__arm_vldrwq_s32): Likewise.
	(__arm_vldrwq_u32): Likewise.
	(__arm_vldrwq_z_s32): Likewise.
	(__arm_vldrwq_z_u32): Likewise.
	(__arm_vld1q_f32): Likewise.
	(__arm_vld1q_f16): Likewise.
	(__arm_vldrwq_f32): Likewise.
	(__arm_vldrwq_z_f32): Likewise.
	(__arm_vldrhq_z_f16): Likewise.
	(__arm_vldrhq_f16): Likewise.
	(vld1q): Define polymorphic variant.
	(vldrhq_gather_offset): Likewise.
	(vldrhq_gather_offset_z): Likewise.
	(vldrhq_gather_shifted_offset): Likewise.
	(vldrhq_gather_shifted_offset_z): Likewise.
	* config/arm/arm_mve_builtins.def (LDRU): Use builtin qualifier.
	(LDRS): Likewise.
	(LDRU_Z): Likewise.
	(LDRS_Z): Likewise.
	(LDRGU_Z): Likewise.
	(LDRGU): Likewise.
	(LDRGS_Z): Likewise.
	(LDRGS): Likewise.
	* config/arm/mve.md (MVE_H_ELEM): Define mode iterator.
	(V_sz_elem1): Likewise.
	(VLD1Q): Define iterator.
	(VLDRHGOQ): Likewise.
	(VLDRHGSOQ): Likewise.
	(VLDRHQ): Likewise.
	(VLDRWQ): Likewise.
	(mve_vldrhq_fv8hf): Define RTL pattern.
	(mve_vldrhq_gather_offset_<supf><mode>): Likewise.
	(mve_vldrhq_gather_offset_z_<supf><mode>): Likewise.
	(mve_vldrhq_gather_shifted_offset_<supf><mode>): Likewise.
	(mve_vldrhq_gather_shifted_offset_z_<supf><mode>): Likewise.
	(mve_vldrhq_<supf><mode>): Likewise.
	(mve_vldrhq_z_fv8hf): Likewise.
	(mve_vldrhq_z_<supf><mode>): Likewise.
	(mve_vldrwq_fv4sf): Likewise.
	(mve_vldrwq_<supf>v4si): Likewise.
	(mve_vldrwq_z_fv4sf): Likewise.
	(mve_vldrwq_z_<supf>v4si): Likewise.
	(mve_vld1q_f<mode>): Define RTL expand pattern.
	(mve_vld1q_<supf><mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vld1q_s8): Define macro.
	(vld1q_s32): Likewise.
	(vld1q_s16): Likewise.
	(vld1q_u8): Likewise.
	(vld1q_u32): Likewise.
	(vld1q_u16): Likewise.
	(vldrhq_gather_offset_s32): Likewise.
	(vldrhq_gather_offset_s16): Likewise.
	(vldrhq_gather_offset_u32): Likewise.
	(vldrhq_gather_offset_u16): Likewise.
	(vldrhq_gather_offset_z_s32): Likewise.
	(vldrhq_gather_offset_z_s16): Likewise.
	(vldrhq_gather_offset_z_u32): Likewise.
	(vldrhq_gather_offset_z_u16): Likewise.
	(vldrhq_gather_shifted_offset_s32): Likewise.
	(vldrhq_gather_shifted_offset_s16): Likewise.
	(vldrhq_gather_shifted_offset_u32): Likewise.
	(vldrhq_gather_shifted_offset_u16): Likewise.
	(vldrhq_gather_shifted_offset_z_s32): Likewise.
	(vldrhq_gather_shifted_offset_z_s16): Likewise.
	(vldrhq_gather_shifted_offset_z_u32): Likewise.
	(vldrhq_gather_shifted_offset_z_u16): Likewise.
	(vldrhq_s32): Likewise.
	(vldrhq_s16): Likewise.
	(vldrhq_u32): Likewise.
	(vldrhq_u16): Likewise.
	(vldrhq_z_s32): Likewise.
	(vldrhq_z_s16): Likewise.
	(vldrhq_z_u32): Likewise.
	(vldrhq_z_u16): Likewise.
	(vldrwq_s32): Likewise.
	(vldrwq_u32): Likewise.
	(vldrwq_z_s32): Likewise.
	(vldrwq_z_u32): Likewise.
	(vld1q_f32): Likewise.
	(vld1q_f16): Likewise.
	(vldrhq_f16): Likewise.
	(vldrhq_z_f16): Likewise.
	(vldrwq_f32): Likewise.
	(vldrwq_z_f32): Likewise.
	(__arm_vld1q_s8): Define intrinsic.
	(__arm_vld1q_s32): Likewise.
	(__arm_vld1q_s16): Likewise.
	(__arm_vld1q_u8): Likewise.
	(__arm_vld1q_u32): Likewise.
	(__arm_vld1q_u16): Likewise.
	(__arm_vldrhq_gather_offset_s32): Likewise.
	(__arm_vldrhq_gather_offset_s16): Likewise.
	(__arm_vldrhq_gather_offset_u32): Likewise.
	(__arm_vldrhq_gather_offset_u16): Likewise.
	(__arm_vldrhq_gather_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_offset_z_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_u16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_s16): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u32): Likewise.
	(__arm_vldrhq_gather_shifted_offset_z_u16): Likewise.
	(__arm_vldrhq_s32): Likewise.
	(__arm_vldrhq_s16): Likewise.
	(__arm_vldrhq_u32): Likewise.
	(__arm_vldrhq_u16): Likewise.
	(__arm_vldrhq_z_s32): Likewise.
	(__arm_vldrhq_z_s16): Likewise.
	(__arm_vldrhq_z_u32): Likewise.
	(__arm_vldrhq_z_u16): Likewise.
	(__arm_vldrwq_s32): Likewise.
	(__arm_vldrwq_u32): Likewise.
	(__arm_vldrwq_z_s32): Likewise.
	(__arm_vldrwq_z_u32): Likewise.
	(__arm_vld1q_f32): Likewise.
	(__arm_vld1q_f16): Likewise.
	(__arm_vldrwq_f32): Likewise.
	(__arm_vldrwq_z_f32): Likewise.
	(__arm_vldrhq_z_f16): Likewise.
	(__arm_vldrhq_f16): Likewise.
	(vld1q): Define polymorphic variant.
	(vldrhq_gather_offset): Likewise.
	(vldrhq_gather_offset_z): Likewise.
	(vldrhq_gather_shifted_offset): Likewise.
	(vldrhq_gather_shifted_offset_z): Likewise.
	* config/arm/arm_mve_builtins.def (LDRU): Use builtin qualifier.
	(LDRS): Likewise.
	(LDRU_Z): Likewise.
	(LDRS_Z): Likewise.
	(LDRGU_Z): Likewise.
	(LDRGU): Likewise.
	(LDRGS_Z): Likewise.
	(LDRGS): Likewise.
	* config/arm/mve.md (MVE_H_ELEM): Define mode iterator.
	(V_sz_elem1): Likewise.
	(VLD1Q): Define iterator.
	(VLDRHGOQ): Likewise.
	(VLDRHGSOQ): Likewise.
	(VLDRHQ): Likewise.
	(VLDRWQ): Likewise.
	(mve_vldrhq_fv8hf): Define RTL pattern.
	(mve_vldrhq_gather_offset_<supf><mode>): Likewise.
	(mve_vldrhq_gather_offset_z_<supf><mode>): Likewise.
	(mve_vldrhq_gather_shifted_offset_<supf><mode>): Likewise.
	(mve_vldrhq_gather_shifted_offset_z_<supf><mode>): Likewise.
	(mve_vldrhq_<supf><mode>): Likewise.
	(mve_vldrhq_z_fv8hf): Likewise.
	(mve_vldrhq_z_<supf><mode>): Likewise.
	(mve_vldrwq_fv4sf): Likewise.
	(mve_vldrwq_<supf>v4si): Likewise.
	(mve_vldrwq_z_fv4sf): Likewise.
	(mve_vldrwq_z_<supf>v4si): Likewise.
	(mve_vld1q_f<mode>): Define RTL expand pattern.
	(mve_vld1q_<supf><mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (LDRGBS_Z_QUALIFIERS): Define builtin
	qualifier.
	(LDRGBU_Z_QUALIFIERS): Likewise.
	(LDRGS_Z_QUALIFIERS): Likewise.
	(LDRGU_Z_QUALIFIERS): Likewise.
	(LDRS_Z_QUALIFIERS): Likewise.
	(LDRU_Z_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vldrbq_gather_offset_z_s16): Define macro.
	(vldrbq_gather_offset_z_u8): Likewise.
	(vldrbq_gather_offset_z_s32): Likewise.
	(vldrbq_gather_offset_z_u16): Likewise.
	(vldrbq_gather_offset_z_u32): Likewise.
	(vldrbq_gather_offset_z_s8): Likewise.
	(vldrbq_z_s16): Likewise.
	(vldrbq_z_u8): Likewise.
	(vldrbq_z_s8): Likewise.
	(vldrbq_z_s32): Likewise.
	(vldrbq_z_u16): Likewise.
	(vldrbq_z_u32): Likewise.
	(vldrwq_gather_base_z_u32): Likewise.
	(vldrwq_gather_base_z_s32): Likewise.
	(__arm_vldrbq_gather_offset_z_s8): Define intrinsic.
	(__arm_vldrbq_gather_offset_z_s32): Likewise.
	(__arm_vldrbq_gather_offset_z_s16): Likewise.
	(__arm_vldrbq_gather_offset_z_u8): Likewise.
	(__arm_vldrbq_gather_offset_z_u32): Likewise.
	(__arm_vldrbq_gather_offset_z_u16): Likewise.
	(__arm_vldrbq_z_s8): Likewise.
	(__arm_vldrbq_z_s32): Likewise.
	(__arm_vldrbq_z_s16): Likewise.
	(__arm_vldrbq_z_u8): Likewise.
	(__arm_vldrbq_z_u32): Likewise.
	(__arm_vldrbq_z_u16): Likewise.
	(__arm_vldrwq_gather_base_z_s32): Likewise.
	(__arm_vldrwq_gather_base_z_u32): Likewise.
	(vldrbq_gather_offset_z): Define polymorphic variant.
	* config/arm/arm_mve_builtins.def (LDRGBS_Z_QUALIFIERS): Use builtin
	qualifier.
	(LDRGBU_Z_QUALIFIERS): Likewise.
	(LDRGS_Z_QUALIFIERS): Likewise.
	(LDRGU_Z_QUALIFIERS): Likewise.
	(LDRS_Z_QUALIFIERS): Likewise.
	(LDRU_Z_QUALIFIERS): Likewise.
	* config/arm/mve.md (mve_vldrbq_gather_offset_z_<supf><mode>): Define
	RTL pattern.
	(mve_vldrbq_z_<supf><mode>): Likewise.
	(mve_vldrwq_gather_base_z_<supf>v4si): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (STRS_P_QUALIFIERS): Define builtin
	qualifier.
	(STRU_P_QUALIFIERS): Likewise.
	(STRSU_P_QUALIFIERS): Likewise.
	(STRSS_P_QUALIFIERS): Likewise.
	(STRSBS_P_QUALIFIERS): Likewise.
	(STRSBU_P_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vstrbq_p_s8): Define macro.
	(vstrbq_p_s32): Likewise.
	(vstrbq_p_s16): Likewise.
	(vstrbq_p_u8): Likewise.
	(vstrbq_p_u32): Likewise.
	(vstrbq_p_u16): Likewise.
	(vstrbq_scatter_offset_p_s8): Likewise.
	(vstrbq_scatter_offset_p_s32): Likewise.
	(vstrbq_scatter_offset_p_s16): Likewise.
	(vstrbq_scatter_offset_p_u8): Likewise.
	(vstrbq_scatter_offset_p_u32): Likewise.
	(vstrbq_scatter_offset_p_u16): Likewise.
	(vstrwq_scatter_base_p_s32): Likewise.
	(vstrwq_scatter_base_p_u32): Likewise.
	(__arm_vstrbq_p_s8): Define intrinsic.
	(__arm_vstrbq_p_s32): Likewise.
	(__arm_vstrbq_p_s16): Likewise.
	(__arm_vstrbq_p_u8): Likewise.
	(__arm_vstrbq_p_u32): Likewise.
	(__arm_vstrbq_p_u16): Likewise.
	(__arm_vstrbq_scatter_offset_p_s8): Likewise.
	(__arm_vstrbq_scatter_offset_p_s32): Likewise.
	(__arm_vstrbq_scatter_offset_p_s16): Likewise.
	(__arm_vstrbq_scatter_offset_p_u8): Likewise.
	(__arm_vstrbq_scatter_offset_p_u32): Likewise.
	(__arm_vstrbq_scatter_offset_p_u16): Likewise.
	(__arm_vstrwq_scatter_base_p_s32): Likewise.
	(__arm_vstrwq_scatter_base_p_u32): Likewise.
	(vstrbq_p): Define polymorphic variant.
	(vstrbq_scatter_offset_p): Likewise.
	(vstrwq_scatter_base_p): Likewise.
	* config/arm/arm_mve_builtins.def (STRS_P_QUALIFIERS): Use builtin
	qualifier.
	(STRU_P_QUALIFIERS): Likewise.
	(STRSU_P_QUALIFIERS): Likewise.
	(STRSS_P_QUALIFIERS): Likewise.
	(STRSBS_P_QUALIFIERS): Likewise.
	(STRSBU_P_QUALIFIERS): Likewise.
	* config/arm/mve.md (mve_vstrbq_scatter_offset_p_<supf><mode>): Define
	RTL pattern.
	(mve_vstrwq_scatter_base_p_<supf>v4si): Likewise.
	(mve_vstrbq_p_<supf><mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (LDRGU_QUALIFIERS): Define builtin
	qualifier.
	(LDRGS_QUALIFIERS): Likewise.
	(LDRS_QUALIFIERS): Likewise.
	(LDRU_QUALIFIERS): Likewise.
	(LDRGBS_QUALIFIERS): Likewise.
	(LDRGBU_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vldrbq_gather_offset_u8): Define macro.
	(vldrbq_gather_offset_s8): Likewise.
	(vldrbq_s8): Likewise.
	(vldrbq_u8): Likewise.
	(vldrbq_gather_offset_u16): Likewise.
	(vldrbq_gather_offset_s16): Likewise.
	(vldrbq_s16): Likewise.
	(vldrbq_u16): Likewise.
	(vldrbq_gather_offset_u32): Likewise.
	(vldrbq_gather_offset_s32): Likewise.
	(vldrbq_s32): Likewise.
	(vldrbq_u32): Likewise.
	(vldrwq_gather_base_s32): Likewise.
	(vldrwq_gather_base_u32): Likewise.
	(__arm_vldrbq_gather_offset_u8): Define intrinsic.
	(__arm_vldrbq_gather_offset_s8): Likewise.
	(__arm_vldrbq_s8): Likewise.
	(__arm_vldrbq_u8): Likewise.
	(__arm_vldrbq_gather_offset_u16): Likewise.
	(__arm_vldrbq_gather_offset_s16): Likewise.
	(__arm_vldrbq_s16): Likewise.
	(__arm_vldrbq_u16): Likewise.
	(__arm_vldrbq_gather_offset_u32): Likewise.
	(__arm_vldrbq_gather_offset_s32): Likewise.
	(__arm_vldrbq_s32): Likewise.
	(__arm_vldrbq_u32): Likewise.
	(__arm_vldrwq_gather_base_s32): Likewise.
	(__arm_vldrwq_gather_base_u32): Likewise.
	(vldrbq_gather_offset): Define polymorphic variant.
	* config/arm/arm_mve_builtins.def (LDRGU_QUALIFIERS): Use builtin
	qualifier.
	(LDRGS_QUALIFIERS): Likewise.
	(LDRS_QUALIFIERS): Likewise.
	(LDRU_QUALIFIERS): Likewise.
	(LDRGBS_QUALIFIERS): Likewise.
	(LDRGBU_QUALIFIERS): Likewise.
	* config/arm/mve.md (VLDRBGOQ): Define iterator.
	(VLDRBQ): Likewise. 
	(VLDRWGBQ): Likewise.
	(mve_vldrbq_gather_offset_<supf><mode>): Define RTL pattern.
	(mve_vldrbq_<supf><mode>): Likewise.
	(mve_vldrwq_gather_base_<supf>v4si): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (STRS_QUALIFIERS): Define builtin qualifier.
	(STRU_QUALIFIERS): Likewise.
	(STRSS_QUALIFIERS): Likewise.
	(STRSU_QUALIFIERS): Likewise.
	(STRSBS_QUALIFIERS): Likewise.
	(STRSBU_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vstrbq_s8): Define macro.
	(vstrbq_u8): Likewise.
	(vstrbq_u16): Likewise.
	(vstrbq_scatter_offset_s8): Likewise.
	(vstrbq_scatter_offset_u8): Likewise.
	(vstrbq_scatter_offset_u16): Likewise.
	(vstrbq_s16): Likewise.
	(vstrbq_u32): Likewise.
	(vstrbq_scatter_offset_s16): Likewise.
	(vstrbq_scatter_offset_u32): Likewise.
	(vstrbq_s32): Likewise.
	(vstrbq_scatter_offset_s32): Likewise.
	(vstrwq_scatter_base_s32): Likewise.
	(vstrwq_scatter_base_u32): Likewise.
	(__arm_vstrbq_scatter_offset_s8): Define intrinsic.
	(__arm_vstrbq_scatter_offset_s32): Likewise.
	(__arm_vstrbq_scatter_offset_s16): Likewise.
	(__arm_vstrbq_scatter_offset_u8): Likewise.
	(__arm_vstrbq_scatter_offset_u32): Likewise.
	(__arm_vstrbq_scatter_offset_u16): Likewise.
	(__arm_vstrbq_s8): Likewise.
	(__arm_vstrbq_s32): Likewise.
	(__arm_vstrbq_s16): Likewise.
	(__arm_vstrbq_u8): Likewise.
	(__arm_vstrbq_u32): Likewise.
	(__arm_vstrbq_u16): Likewise.
	(__arm_vstrwq_scatter_base_s32): Likewise.
	(__arm_vstrwq_scatter_base_u32): Likewise.
	(vstrbq): Define polymorphic variant.
	(vstrbq_scatter_offset): Likewise.
	(vstrwq_scatter_base): Likewise.
	* config/arm/arm_mve_builtins.def (STRS_QUALIFIERS): Use builtin
	qualifier.
	(STRU_QUALIFIERS): Likewise.
	(STRSS_QUALIFIERS): Likewise.
	(STRSU_QUALIFIERS): Likewise.
	(STRSBS_QUALIFIERS): Likewise.
	(STRSBU_QUALIFIERS): Likewise.
	* config/arm/mve.md (MVE_B_ELEM): Define mode attribute iterator.
	(VSTRWSBQ): Define iterators.
	(VSTRBSOQ): Likewise. 
	(VSTRBQ): Likewise.
	(mve_vstrbq_<supf><mode>): Define RTL pattern.
	(mve_vstrbq_scatter_offset_<supf><mode>): Likewise.
	(mve_vstrwq_scatter_base_<supf>v4si): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vabdq_m_f32): Define macro.
	(vabdq_m_f16): Likewise.
	(vaddq_m_f32): Likewise.
	(vaddq_m_f16): Likewise.
	(vaddq_m_n_f32): Likewise.
	(vaddq_m_n_f16): Likewise.
	(vandq_m_f32): Likewise.
	(vandq_m_f16): Likewise.
	(vbicq_m_f32): Likewise.
	(vbicq_m_f16): Likewise.
	(vbrsrq_m_n_f32): Likewise.
	(vbrsrq_m_n_f16): Likewise.
	(vcaddq_rot270_m_f32): Likewise.
	(vcaddq_rot270_m_f16): Likewise.
	(vcaddq_rot90_m_f32): Likewise.
	(vcaddq_rot90_m_f16): Likewise.
	(vcmlaq_m_f32): Likewise.
	(vcmlaq_m_f16): Likewise.
	(vcmlaq_rot180_m_f32): Likewise.
	(vcmlaq_rot180_m_f16): Likewise.
	(vcmlaq_rot270_m_f32): Likewise.
	(vcmlaq_rot270_m_f16): Likewise.
	(vcmlaq_rot90_m_f32): Likewise.
	(vcmlaq_rot90_m_f16): Likewise.
	(vcmulq_m_f32): Likewise.
	(vcmulq_m_f16): Likewise.
	(vcmulq_rot180_m_f32): Likewise.
	(vcmulq_rot180_m_f16): Likewise.
	(vcmulq_rot270_m_f32): Likewise.
	(vcmulq_rot270_m_f16): Likewise.
	(vcmulq_rot90_m_f32): Likewise.
	(vcmulq_rot90_m_f16): Likewise.
	(vcvtq_m_n_s32_f32): Likewise.
	(vcvtq_m_n_s16_f16): Likewise.
	(vcvtq_m_n_u32_f32): Likewise.
	(vcvtq_m_n_u16_f16): Likewise.
	(veorq_m_f32): Likewise.
	(veorq_m_f16): Likewise.
	(vfmaq_m_f32): Likewise.
	(vfmaq_m_f16): Likewise.
	(vfmaq_m_n_f32): Likewise.
	(vfmaq_m_n_f16): Likewise.
	(vfmasq_m_n_f32): Likewise.
	(vfmasq_m_n_f16): Likewise.
	(vfmsq_m_f32): Likewise.
	(vfmsq_m_f16): Likewise.
	(vmaxnmq_m_f32): Likewise.
	(vmaxnmq_m_f16): Likewise.
	(vminnmq_m_f32): Likewise.
	(vminnmq_m_f16): Likewise.
	(vmulq_m_f32): Likewise.
	(vmulq_m_f16): Likewise.
	(vmulq_m_n_f32): Likewise.
	(vmulq_m_n_f16): Likewise.
	(vornq_m_f32): Likewise.
	(vornq_m_f16): Likewise.
	(vorrq_m_f32): Likewise.
	(vorrq_m_f16): Likewise.
	(vsubq_m_f32): Likewise.
	(vsubq_m_f16): Likewise.
	(vsubq_m_n_f32): Likewise.
	(vsubq_m_n_f16): Likewise.
	(__attribute__): Likewise.
	(__arm_vabdq_m_f32): Likewise.
	(__arm_vabdq_m_f16): Likewise.
	(__arm_vaddq_m_f32): Likewise.
	(__arm_vaddq_m_f16): Likewise.
	(__arm_vaddq_m_n_f32): Likewise.
	(__arm_vaddq_m_n_f16): Likewise.
	(__arm_vandq_m_f32): Likewise.
	(__arm_vandq_m_f16): Likewise.
	(__arm_vbicq_m_f32): Likewise.
	(__arm_vbicq_m_f16): Likewise.
	(__arm_vbrsrq_m_n_f32): Likewise.
	(__arm_vbrsrq_m_n_f16): Likewise.
	(__arm_vcaddq_rot270_m_f32): Likewise.
	(__arm_vcaddq_rot270_m_f16): Likewise.
	(__arm_vcaddq_rot90_m_f32): Likewise.
	(__arm_vcaddq_rot90_m_f16): Likewise.
	(__arm_vcmlaq_m_f32): Likewise.
	(__arm_vcmlaq_m_f16): Likewise.
	(__arm_vcmlaq_rot180_m_f32): Likewise.
	(__arm_vcmlaq_rot180_m_f16): Likewise.
	(__arm_vcmlaq_rot270_m_f32): Likewise.
	(__arm_vcmlaq_rot270_m_f16): Likewise.
	(__arm_vcmlaq_rot90_m_f32): Likewise.
	(__arm_vcmlaq_rot90_m_f16): Likewise.
	(__arm_vcmulq_m_f32): Likewise.
	(__arm_vcmulq_m_f16): Likewise.
	(__arm_vcmulq_rot180_m_f32): Define intrinsic.
	(__arm_vcmulq_rot180_m_f16): Likewise.
	(__arm_vcmulq_rot270_m_f32): Likewise.
	(__arm_vcmulq_rot270_m_f16): Likewise.
	(__arm_vcmulq_rot90_m_f32): Likewise.
	(__arm_vcmulq_rot90_m_f16): Likewise.
	(__arm_vcvtq_m_n_s32_f32): Likewise.
	(__arm_vcvtq_m_n_s16_f16): Likewise.
	(__arm_vcvtq_m_n_u32_f32): Likewise.
	(__arm_vcvtq_m_n_u16_f16): Likewise.
	(__arm_veorq_m_f32): Likewise.
	(__arm_veorq_m_f16): Likewise.
	(__arm_vfmaq_m_f32): Likewise.
	(__arm_vfmaq_m_f16): Likewise.
	(__arm_vfmaq_m_n_f32): Likewise.
	(__arm_vfmaq_m_n_f16): Likewise.
	(__arm_vfmasq_m_n_f32): Likewise.
	(__arm_vfmasq_m_n_f16): Likewise.
	(__arm_vfmsq_m_f32): Likewise.
	(__arm_vfmsq_m_f16): Likewise.
	(__arm_vmaxnmq_m_f32): Likewise.
	(__arm_vmaxnmq_m_f16): Likewise.
	(__arm_vminnmq_m_f32): Likewise.
	(__arm_vminnmq_m_f16): Likewise.
	(__arm_vmulq_m_f32): Likewise.
	(__arm_vmulq_m_f16): Likewise.
	(__arm_vmulq_m_n_f32): Likewise.
	(__arm_vmulq_m_n_f16): Likewise.
	(__arm_vornq_m_f32): Likewise.
	(__arm_vornq_m_f16): Likewise.
	(__arm_vorrq_m_f32): Likewise.
	(__arm_vorrq_m_f16): Likewise.
	(__arm_vsubq_m_f32): Likewise.
	(__arm_vsubq_m_f16): Likewise.
	(__arm_vsubq_m_n_f32): Likewise.
	(__arm_vsubq_m_n_f16): Likewise.
	(vabdq_m): Define polymorphic variant.
	(vaddq_m): Likewise.
	(vaddq_m_n): Likewise.
	(vandq_m): Likewise.
	(vbicq_m): Likewise.
	(vbrsrq_m_n): Likewise.
	(vcaddq_rot270_m): Likewise.
	(vcaddq_rot90_m): Likewise.
	(vcmlaq_m): Likewise.
	(vcmlaq_rot180_m): Likewise.
	(vcmlaq_rot270_m): Likewise.
	(vcmlaq_rot90_m): Likewise.
	(vcmulq_m): Likewise.
	(vcmulq_rot180_m): Likewise.
	(vcmulq_rot270_m): Likewise.
	(vcmulq_rot90_m): Likewise.
	(veorq_m): Likewise.
	(vfmaq_m): Likewise.
	(vfmaq_m_n): Likewise.
	(vfmasq_m_n): Likewise.
	(vfmsq_m): Likewise.
	(vmaxnmq_m): Likewise.
	(vminnmq_m): Likewise.
	(vmulq_m): Likewise.
	(vmulq_m_n): Likewise.
	(vornq_m): Likewise.
	(vsubq_m): Likewise.
	(vsubq_m_n): Likewise.
	(vorrq_m): Likewise.
	* config/arm/arm_mve_builtins.def (QUADOP_NONE_NONE_NONE_IMM_UNONE): Use
	builtin qualifier.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_NONE_IMM_UNONE): Likewise.
	* config/arm/mve.md (mve_vabdq_m_f<mode>): Define RTL pattern.
	(mve_vaddq_m_f<mode>): Likewise.
	(mve_vaddq_m_n_f<mode>): Likewise.
	(mve_vandq_m_f<mode>): Likewise.
	(mve_vbicq_m_f<mode>): Likewise.
	(mve_vbrsrq_m_n_f<mode>): Likewise.
	(mve_vcaddq_rot270_m_f<mode>): Likewise.
	(mve_vcaddq_rot90_m_f<mode>): Likewise.
	(mve_vcmlaq_m_f<mode>): Likewise.
	(mve_vcmlaq_rot180_m_f<mode>): Likewise.
	(mve_vcmlaq_rot270_m_f<mode>): Likewise.
	(mve_vcmlaq_rot90_m_f<mode>): Likewise.
	(mve_vcmulq_m_f<mode>): Likewise.
	(mve_vcmulq_rot180_m_f<mode>): Likewise.
	(mve_vcmulq_rot270_m_f<mode>): Likewise.
	(mve_vcmulq_rot90_m_f<mode>): Likewise.
	(mve_veorq_m_f<mode>): Likewise.
	(mve_vfmaq_m_f<mode>): Likewise.
	(mve_vfmaq_m_n_f<mode>): Likewise.
	(mve_vfmasq_m_n_f<mode>): Likewise.
	(mve_vfmsq_m_f<mode>): Likewise.
	(mve_vmaxnmq_m_f<mode>): Likewise.
	(mve_vminnmq_m_f<mode>): Likewise.
	(mve_vmulq_m_f<mode>): Likewise.
	(mve_vmulq_m_n_f<mode>): Likewise.
	(mve_vornq_m_f<mode>): Likewise.
	(mve_vorrq_m_f<mode>): Likewise.
	(mve_vsubq_m_f<mode>): Likewise.
	(mve_vsubq_m_n_f<mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-protos.h (arm_mve_immediate_check): 
	* config/arm/arm.c (arm_mve_immediate_check): Define fuction to	check
	mode and interger value.
	* config/arm/arm_mve.h (vmlaldavaq_p_s32): Define macro.
	(vmlaldavaq_p_s16): Likewise.
	(vmlaldavaq_p_u32): Likewise.
	(vmlaldavaq_p_u16): Likewise.
	(vmlaldavaxq_p_s32): Likewise.
	(vmlaldavaxq_p_s16): Likewise.
	(vmlaldavaxq_p_u32): Likewise.
	(vmlaldavaxq_p_u16): Likewise.
	(vmlsldavaq_p_s32): Likewise.
	(vmlsldavaq_p_s16): Likewise.
	(vmlsldavaxq_p_s32): Likewise.
	(vmlsldavaxq_p_s16): Likewise.
	(vmullbq_poly_m_p8): Likewise.
	(vmullbq_poly_m_p16): Likewise.
	(vmulltq_poly_m_p8): Likewise.
	(vmulltq_poly_m_p16): Likewise.
	(vqdmullbq_m_n_s32): Likewise.
	(vqdmullbq_m_n_s16): Likewise.
	(vqdmullbq_m_s32): Likewise.
	(vqdmullbq_m_s16): Likewise.
	(vqdmulltq_m_n_s32): Likewise.
	(vqdmulltq_m_n_s16): Likewise.
	(vqdmulltq_m_s32): Likewise.
	(vqdmulltq_m_s16): Likewise.
	(vqrshrnbq_m_n_s32): Likewise.
	(vqrshrnbq_m_n_s16): Likewise.
	(vqrshrnbq_m_n_u32): Likewise.
	(vqrshrnbq_m_n_u16): Likewise.
	(vqrshrntq_m_n_s32): Likewise.
	(vqrshrntq_m_n_s16): Likewise.
	(vqrshrntq_m_n_u32): Likewise.
	(vqrshrntq_m_n_u16): Likewise.
	(vqrshrunbq_m_n_s32): Likewise.
	(vqrshrunbq_m_n_s16): Likewise.
	(vqrshruntq_m_n_s32): Likewise.
	(vqrshruntq_m_n_s16): Likewise.
	(vqshrnbq_m_n_s32): Likewise.
	(vqshrnbq_m_n_s16): Likewise.
	(vqshrnbq_m_n_u32): Likewise.
	(vqshrnbq_m_n_u16): Likewise.
	(vqshrntq_m_n_s32): Likewise.
	(vqshrntq_m_n_s16): Likewise.
	(vqshrntq_m_n_u32): Likewise.
	(vqshrntq_m_n_u16): Likewise.
	(vqshrunbq_m_n_s32): Likewise.
	(vqshrunbq_m_n_s16): Likewise.
	(vqshruntq_m_n_s32): Likewise.
	(vqshruntq_m_n_s16): Likewise.
	(vrmlaldavhaq_p_s32): Likewise.
	(vrmlaldavhaq_p_u32): Likewise.
	(vrmlaldavhaxq_p_s32): Likewise.
	(vrmlsldavhaq_p_s32): Likewise.
	(vrmlsldavhaxq_p_s32): Likewise.
	(vrshrnbq_m_n_s32): Likewise.
	(vrshrnbq_m_n_s16): Likewise.
	(vrshrnbq_m_n_u32): Likewise.
	(vrshrnbq_m_n_u16): Likewise.
	(vrshrntq_m_n_s32): Likewise.
	(vrshrntq_m_n_s16): Likewise.
	(vrshrntq_m_n_u32): Likewise.
	(vrshrntq_m_n_u16): Likewise.
	(vshllbq_m_n_s8): Likewise.
	(vshllbq_m_n_s16): Likewise.
	(vshllbq_m_n_u8): Likewise.
	(vshllbq_m_n_u16): Likewise.
	(vshlltq_m_n_s8): Likewise.
	(vshlltq_m_n_s16): Likewise.
	(vshlltq_m_n_u8): Likewise.
	(vshlltq_m_n_u16): Likewise.
	(vshrnbq_m_n_s32): Likewise.
	(vshrnbq_m_n_s16): Likewise.
	(vshrnbq_m_n_u32): Likewise.
	(vshrnbq_m_n_u16): Likewise.
	(vshrntq_m_n_s32): Likewise.
	(vshrntq_m_n_s16): Likewise.
	(vshrntq_m_n_u32): Likewise.
	(vshrntq_m_n_u16): Likewise.
	(__arm_vmlaldavaq_p_s32): Define intrinsic.
	(__arm_vmlaldavaq_p_s16): Likewise.
	(__arm_vmlaldavaq_p_u32): Likewise.
	(__arm_vmlaldavaq_p_u16): Likewise.
	(__arm_vmlaldavaxq_p_s32): Likewise.
	(__arm_vmlaldavaxq_p_s16): Likewise.
	(__arm_vmlaldavaxq_p_u32): Likewise.
	(__arm_vmlaldavaxq_p_u16): Likewise.
	(__arm_vmlsldavaq_p_s32): Likewise.
	(__arm_vmlsldavaq_p_s16): Likewise.
	(__arm_vmlsldavaxq_p_s32): Likewise.
	(__arm_vmlsldavaxq_p_s16): Likewise.
	(__arm_vmullbq_poly_m_p8): Likewise.
	(__arm_vmullbq_poly_m_p16): Likewise.
	(__arm_vmulltq_poly_m_p8): Likewise.
	(__arm_vmulltq_poly_m_p16): Likewise.
	(__arm_vqdmullbq_m_n_s32): Likewise.
	(__arm_vqdmullbq_m_n_s16): Likewise.
	(__arm_vqdmullbq_m_s32): Likewise.
	(__arm_vqdmullbq_m_s16): Likewise.
	(__arm_vqdmulltq_m_n_s32): Likewise.
	(__arm_vqdmulltq_m_n_s16): Likewise.
	(__arm_vqdmulltq_m_s32): Likewise.
	(__arm_vqdmulltq_m_s16): Likewise.
	(__arm_vqrshrnbq_m_n_s32): Likewise.
	(__arm_vqrshrnbq_m_n_s16): Likewise.
	(__arm_vqrshrnbq_m_n_u32): Likewise.
	(__arm_vqrshrnbq_m_n_u16): Likewise.
	(__arm_vqrshrntq_m_n_s32): Likewise.
	(__arm_vqrshrntq_m_n_s16): Likewise.
	(__arm_vqrshrntq_m_n_u32): Likewise.
	(__arm_vqrshrntq_m_n_u16): Likewise.
	(__arm_vqrshrunbq_m_n_s32): Likewise.
	(__arm_vqrshrunbq_m_n_s16): Likewise.
	(__arm_vqrshruntq_m_n_s32): Likewise.
	(__arm_vqrshruntq_m_n_s16): Likewise.
	(__arm_vqshrnbq_m_n_s32): Likewise.
	(__arm_vqshrnbq_m_n_s16): Likewise.
	(__arm_vqshrnbq_m_n_u32): Likewise.
	(__arm_vqshrnbq_m_n_u16): Likewise.
	(__arm_vqshrntq_m_n_s32): Likewise.
	(__arm_vqshrntq_m_n_s16): Likewise.
	(__arm_vqshrntq_m_n_u32): Likewise.
	(__arm_vqshrntq_m_n_u16): Likewise.
	(__arm_vqshrunbq_m_n_s32): Likewise.
	(__arm_vqshrunbq_m_n_s16): Likewise.
	(__arm_vqshruntq_m_n_s32): Likewise.
	(__arm_vqshruntq_m_n_s16): Likewise.
	(__arm_vrmlaldavhaq_p_s32): Likewise.
	(__arm_vrmlaldavhaq_p_u32): Likewise.
	(__arm_vrmlaldavhaxq_p_s32): Likewise.
	(__arm_vrmlsldavhaq_p_s32): Likewise.
	(__arm_vrmlsldavhaxq_p_s32): Likewise.
	(__arm_vrshrnbq_m_n_s32): Likewise.
	(__arm_vrshrnbq_m_n_s16): Likewise.
	(__arm_vrshrnbq_m_n_u32): Likewise.
	(__arm_vrshrnbq_m_n_u16): Likewise.
	(__arm_vrshrntq_m_n_s32): Likewise.
	(__arm_vrshrntq_m_n_s16): Likewise.
	(__arm_vrshrntq_m_n_u32): Likewise.
	(__arm_vrshrntq_m_n_u16): Likewise.
	(__arm_vshllbq_m_n_s8): Likewise.
	(__arm_vshllbq_m_n_s16): Likewise.
	(__arm_vshllbq_m_n_u8): Likewise.
	(__arm_vshllbq_m_n_u16): Likewise.
	(__arm_vshlltq_m_n_s8): Likewise.
	(__arm_vshlltq_m_n_s16): Likewise.
	(__arm_vshlltq_m_n_u8): Likewise.
	(__arm_vshlltq_m_n_u16): Likewise.
	(__arm_vshrnbq_m_n_s32): Likewise.
	(__arm_vshrnbq_m_n_s16): Likewise.
	(__arm_vshrnbq_m_n_u32): Likewise.
	(__arm_vshrnbq_m_n_u16): Likewise.
	(__arm_vshrntq_m_n_s32): Likewise.
	(__arm_vshrntq_m_n_s16): Likewise.
	(__arm_vshrntq_m_n_u32): Likewise.
	(__arm_vshrntq_m_n_u16): Likewise.
	(vmullbq_poly_m): Define polymorphic variant.
	(vmulltq_poly_m): Likewise.
	(vshllbq_m): Likewise.
	(vshrntq_m_n): Likewise.
	(vshrnbq_m_n): Likewise.
	(vshlltq_m_n): Likewise.
	(vshllbq_m_n): Likewise.
	(vrshrntq_m_n): Likewise.
	(vrshrnbq_m_n): Likewise.
	(vqshruntq_m_n): Likewise.
	(vqshrunbq_m_n): Likewise.
	(vqdmullbq_m_n): Likewise.
	(vqdmullbq_m): Likewise.
	(vqdmulltq_m_n): Likewise.
	(vqdmulltq_m): Likewise.
	(vqrshrnbq_m_n): Likewise.
	(vqrshrntq_m_n): Likewise.
	(vqrshrunbq_m_n): Likewise.
	(vqrshruntq_m_n): Likewise.
	(vqshrnbq_m_n): Likewise.
	(vqshrntq_m_n): Likewise.
	* config/arm/arm_mve_builtins.def (QUADOP_NONE_NONE_NONE_IMM_UNONE): Use
	builtin qualifiers.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_NONE_IMM_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_IMM_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_UNONE_UNONE): Likewise.
	* config/arm/mve.md (VMLALDAVAQ_P): Define iterator.
	(VMLALDAVAXQ_P): Likewise.
	(VQRSHRNBQ_M_N): Likewise.
	(VQRSHRNTQ_M_N): Likewise.
	(VQSHRNBQ_M_N): Likewise.
	(VQSHRNTQ_M_N): Likewise.
	(VRSHRNBQ_M_N): Likewise.
	(VRSHRNTQ_M_N): Likewise.
	(VSHLLBQ_M_N): Likewise.
	(VSHLLTQ_M_N): Likewise.
	(VSHRNBQ_M_N): Likewise.
	(VSHRNTQ_M_N): Likewise.
	(mve_vmlaldavaq_p_<supf><mode>): Define RTL pattern.
	(mve_vmlaldavaxq_p_<supf><mode>): Likewise.
	(mve_vqrshrnbq_m_n_<supf><mode>): Likewise.
	(mve_vqrshrntq_m_n_<supf><mode>): Likewise.
	(mve_vqshrnbq_m_n_<supf><mode>): Likewise.
	(mve_vqshrntq_m_n_<supf><mode>): Likewise.
	(mve_vrmlaldavhaq_p_sv4si): Likewise.
	(mve_vrshrnbq_m_n_<supf><mode>): Likewise.
	(mve_vrshrntq_m_n_<supf><mode>): Likewise.
	(mve_vshllbq_m_n_<supf><mode>): Likewise.
	(mve_vshlltq_m_n_<supf><mode>): Likewise.
	(mve_vshrnbq_m_n_<supf><mode>): Likewise.
	(mve_vshrntq_m_n_<supf><mode>): Likewise.
	(mve_vmlsldavaq_p_s<mode>): Likewise.
	(mve_vmlsldavaxq_p_s<mode>): Likewise.
	(mve_vmullbq_poly_m_p<mode>): Likewise.
	(mve_vmulltq_poly_m_p<mode>): Likewise.
	(mve_vqdmullbq_m_n_s<mode>): Likewise.
	(mve_vqdmullbq_m_s<mode>): Likewise.
	(mve_vqdmulltq_m_n_s<mode>): Likewise.
	(mve_vqdmulltq_m_s<mode>): Likewise.
	(mve_vqrshrunbq_m_n_s<mode>): Likewise.
	(mve_vqrshruntq_m_n_s<mode>): Likewise.
	(mve_vqshrunbq_m_n_s<mode>): Likewise.
	(mve_vqshruntq_m_n_s<mode>): Likewise.
	(mve_vrmlaldavhaq_p_uv4si): Likewise.
	(mve_vrmlaldavhaxq_p_sv4si): Likewise.
	(mve_vrmlsldavhaq_p_sv4si): Likewise.
	(mve_vrmlsldavhaxq_p_sv4si): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>
	
	* config/arm/arm_mve.h (vabdq_m_s8): Define macro.
	(vabdq_m_s32): Likewise.
	(vabdq_m_s16): Likewise.
	(vabdq_m_u8): Likewise.
	(vabdq_m_u32): Likewise.
	(vabdq_m_u16): Likewise.
	(vaddq_m_n_s8): Likewise.
	(vaddq_m_n_s32): Likewise.
	(vaddq_m_n_s16): Likewise.
	(vaddq_m_n_u8): Likewise.
	(vaddq_m_n_u32): Likewise.
	(vaddq_m_n_u16): Likewise.
	(vaddq_m_s8): Likewise.
	(vaddq_m_s32): Likewise.
	(vaddq_m_s16): Likewise.
	(vaddq_m_u8): Likewise.
	(vaddq_m_u32): Likewise.
	(vaddq_m_u16): Likewise.
	(vandq_m_s8): Likewise.
	(vandq_m_s32): Likewise.
	(vandq_m_s16): Likewise.
	(vandq_m_u8): Likewise.
	(vandq_m_u32): Likewise.
	(vandq_m_u16): Likewise.
	(vbicq_m_s8): Likewise.
	(vbicq_m_s32): Likewise.
	(vbicq_m_s16): Likewise.
	(vbicq_m_u8): Likewise.
	(vbicq_m_u32): Likewise.
	(vbicq_m_u16): Likewise.
	(vbrsrq_m_n_s8): Likewise.
	(vbrsrq_m_n_s32): Likewise.
	(vbrsrq_m_n_s16): Likewise.
	(vbrsrq_m_n_u8): Likewise.
	(vbrsrq_m_n_u32): Likewise.
	(vbrsrq_m_n_u16): Likewise.
	(vcaddq_rot270_m_s8): Likewise.
	(vcaddq_rot270_m_s32): Likewise.
	(vcaddq_rot270_m_s16): Likewise.
	(vcaddq_rot270_m_u8): Likewise.
	(vcaddq_rot270_m_u32): Likewise.
	(vcaddq_rot270_m_u16): Likewise.
	(vcaddq_rot90_m_s8): Likewise.
	(vcaddq_rot90_m_s32): Likewise.
	(vcaddq_rot90_m_s16): Likewise.
	(vcaddq_rot90_m_u8): Likewise.
	(vcaddq_rot90_m_u32): Likewise.
	(vcaddq_rot90_m_u16): Likewise.
	(veorq_m_s8): Likewise.
	(veorq_m_s32): Likewise.
	(veorq_m_s16): Likewise.
	(veorq_m_u8): Likewise.
	(veorq_m_u32): Likewise.
	(veorq_m_u16): Likewise.
	(vhaddq_m_n_s8): Likewise.
	(vhaddq_m_n_s32): Likewise.
	(vhaddq_m_n_s16): Likewise.
	(vhaddq_m_n_u8): Likewise.
	(vhaddq_m_n_u32): Likewise.
	(vhaddq_m_n_u16): Likewise.
	(vhaddq_m_s8): Likewise.
	(vhaddq_m_s32): Likewise.
	(vhaddq_m_s16): Likewise.
	(vhaddq_m_u8): Likewise.
	(vhaddq_m_u32): Likewise.
	(vhaddq_m_u16): Likewise.
	(vhcaddq_rot270_m_s8): Likewise.
	(vhcaddq_rot270_m_s32): Likewise.
	(vhcaddq_rot270_m_s16): Likewise.
	(vhcaddq_rot90_m_s8): Likewise.
	(vhcaddq_rot90_m_s32): Likewise.
	(vhcaddq_rot90_m_s16): Likewise.
	(vhsubq_m_n_s8): Likewise.
	(vhsubq_m_n_s32): Likewise.
	(vhsubq_m_n_s16): Likewise.
	(vhsubq_m_n_u8): Likewise.
	(vhsubq_m_n_u32): Likewise.
	(vhsubq_m_n_u16): Likewise.
	(vhsubq_m_s8): Likewise.
	(vhsubq_m_s32): Likewise.
	(vhsubq_m_s16): Likewise.
	(vhsubq_m_u8): Likewise.
	(vhsubq_m_u32): Likewise.
	(vhsubq_m_u16): Likewise.
	(vmaxq_m_s8): Likewise.
	(vmaxq_m_s32): Likewise.
	(vmaxq_m_s16): Likewise.
	(vmaxq_m_u8): Likewise.
	(vmaxq_m_u32): Likewise.
	(vmaxq_m_u16): Likewise.
	(vminq_m_s8): Likewise.
	(vminq_m_s32): Likewise.
	(vminq_m_s16): Likewise.
	(vminq_m_u8): Likewise.
	(vminq_m_u32): Likewise.
	(vminq_m_u16): Likewise.
	(vmladavaq_p_s8): Likewise.
	(vmladavaq_p_s32): Likewise.
	(vmladavaq_p_s16): Likewise.
	(vmladavaq_p_u8): Likewise.
	(vmladavaq_p_u32): Likewise.
	(vmladavaq_p_u16): Likewise.
	(vmladavaxq_p_s8): Likewise.
	(vmladavaxq_p_s32): Likewise.
	(vmladavaxq_p_s16): Likewise.
	(vmlaq_m_n_s8): Likewise.
	(vmlaq_m_n_s32): Likewise.
	(vmlaq_m_n_s16): Likewise.
	(vmlaq_m_n_u8): Likewise.
	(vmlaq_m_n_u32): Likewise.
	(vmlaq_m_n_u16): Likewise.
	(vmlasq_m_n_s8): Likewise.
	(vmlasq_m_n_s32): Likewise.
	(vmlasq_m_n_s16): Likewise.
	(vmlasq_m_n_u8): Likewise.
	(vmlasq_m_n_u32): Likewise.
	(vmlasq_m_n_u16): Likewise.
	(vmlsdavaq_p_s8): Likewise.
	(vmlsdavaq_p_s32): Likewise.
	(vmlsdavaq_p_s16): Likewise.
	(vmlsdavaxq_p_s8): Likewise.
	(vmlsdavaxq_p_s32): Likewise.
	(vmlsdavaxq_p_s16): Likewise.
	(vmulhq_m_s8): Likewise.
	(vmulhq_m_s32): Likewise.
	(vmulhq_m_s16): Likewise.
	(vmulhq_m_u8): Likewise.
	(vmulhq_m_u32): Likewise.
	(vmulhq_m_u16): Likewise.
	(vmullbq_int_m_s8): Likewise.
	(vmullbq_int_m_s32): Likewise.
	(vmullbq_int_m_s16): Likewise.
	(vmullbq_int_m_u8): Likewise.
	(vmullbq_int_m_u32): Likewise.
	(vmullbq_int_m_u16): Likewise.
	(vmulltq_int_m_s8): Likewise.
	(vmulltq_int_m_s32): Likewise.
	(vmulltq_int_m_s16): Likewise.
	(vmulltq_int_m_u8): Likewise.
	(vmulltq_int_m_u32): Likewise.
	(vmulltq_int_m_u16): Likewise.
	(vmulq_m_n_s8): Likewise.
	(vmulq_m_n_s32): Likewise.
	(vmulq_m_n_s16): Likewise.
	(vmulq_m_n_u8): Likewise.
	(vmulq_m_n_u32): Likewise.
	(vmulq_m_n_u16): Likewise.
	(vmulq_m_s8): Likewise.
	(vmulq_m_s32): Likewise.
	(vmulq_m_s16): Likewise.
	(vmulq_m_u8): Likewise.
	(vmulq_m_u32): Likewise.
	(vmulq_m_u16): Likewise.
	(vornq_m_s8): Likewise.
	(vornq_m_s32): Likewise.
	(vornq_m_s16): Likewise.
	(vornq_m_u8): Likewise.
	(vornq_m_u32): Likewise.
	(vornq_m_u16): Likewise.
	(vorrq_m_s8): Likewise.
	(vorrq_m_s32): Likewise.
	(vorrq_m_s16): Likewise.
	(vorrq_m_u8): Likewise.
	(vorrq_m_u32): Likewise.
	(vorrq_m_u16): Likewise.
	(vqaddq_m_n_s8): Likewise.
	(vqaddq_m_n_s32): Likewise.
	(vqaddq_m_n_s16): Likewise.
	(vqaddq_m_n_u8): Likewise.
	(vqaddq_m_n_u32): Likewise.
	(vqaddq_m_n_u16): Likewise.
	(vqaddq_m_s8): Likewise.
	(vqaddq_m_s32): Likewise.
	(vqaddq_m_s16): Likewise.
	(vqaddq_m_u8): Likewise.
	(vqaddq_m_u32): Likewise.
	(vqaddq_m_u16): Likewise.
	(vqdmladhq_m_s8): Likewise.
	(vqdmladhq_m_s32): Likewise.
	(vqdmladhq_m_s16): Likewise.
	(vqdmladhxq_m_s8): Likewise.
	(vqdmladhxq_m_s32): Likewise.
	(vqdmladhxq_m_s16): Likewise.
	(vqdmlahq_m_n_s8): Likewise.
	(vqdmlahq_m_n_s32): Likewise.
	(vqdmlahq_m_n_s16): Likewise.
	(vqdmlahq_m_n_u8): Likewise.
	(vqdmlahq_m_n_u32): Likewise.
	(vqdmlahq_m_n_u16): Likewise.
	(vqdmlsdhq_m_s8): Likewise.
	(vqdmlsdhq_m_s32): Likewise.
	(vqdmlsdhq_m_s16): Likewise.
	(vqdmlsdhxq_m_s8): Likewise.
	(vqdmlsdhxq_m_s32): Likewise.
	(vqdmlsdhxq_m_s16): Likewise.
	(vqdmulhq_m_n_s8): Likewise.
	(vqdmulhq_m_n_s32): Likewise.
	(vqdmulhq_m_n_s16): Likewise.
	(vqdmulhq_m_s8): Likewise.
	(vqdmulhq_m_s32): Likewise.
	(vqdmulhq_m_s16): Likewise.
	(vqrdmladhq_m_s8): Likewise.
	(vqrdmladhq_m_s32): Likewise.
	(vqrdmladhq_m_s16): Likewise.
	(vqrdmladhxq_m_s8): Likewise.
	(vqrdmladhxq_m_s32): Likewise.
	(vqrdmladhxq_m_s16): Likewise.
	(vqrdmlahq_m_n_s8): Likewise.
	(vqrdmlahq_m_n_s32): Likewise.
	(vqrdmlahq_m_n_s16): Likewise.
	(vqrdmlahq_m_n_u8): Likewise.
	(vqrdmlahq_m_n_u32): Likewise.
	(vqrdmlahq_m_n_u16): Likewise.
	(vqrdmlashq_m_n_s8): Likewise.
	(vqrdmlashq_m_n_s32): Likewise.
	(vqrdmlashq_m_n_s16): Likewise.
	(vqrdmlashq_m_n_u8): Likewise.
	(vqrdmlashq_m_n_u32): Likewise.
	(vqrdmlashq_m_n_u16): Likewise.
	(vqrdmlsdhq_m_s8): Likewise.
	(vqrdmlsdhq_m_s32): Likewise.
	(vqrdmlsdhq_m_s16): Likewise.
	(vqrdmlsdhxq_m_s8): Likewise.
	(vqrdmlsdhxq_m_s32): Likewise.
	(vqrdmlsdhxq_m_s16): Likewise.
	(vqrdmulhq_m_n_s8): Likewise.
	(vqrdmulhq_m_n_s32): Likewise.
	(vqrdmulhq_m_n_s16): Likewise.
	(vqrdmulhq_m_s8): Likewise.
	(vqrdmulhq_m_s32): Likewise.
	(vqrdmulhq_m_s16): Likewise.
	(vqrshlq_m_s8): Likewise.
	(vqrshlq_m_s32): Likewise.
	(vqrshlq_m_s16): Likewise.
	(vqrshlq_m_u8): Likewise.
	(vqrshlq_m_u32): Likewise.
	(vqrshlq_m_u16): Likewise.
	(vqshlq_m_n_s8): Likewise.
	(vqshlq_m_n_s32): Likewise.
	(vqshlq_m_n_s16): Likewise.
	(vqshlq_m_n_u8): Likewise.
	(vqshlq_m_n_u32): Likewise.
	(vqshlq_m_n_u16): Likewise.
	(vqshlq_m_s8): Likewise.
	(vqshlq_m_s32): Likewise.
	(vqshlq_m_s16): Likewise.
	(vqshlq_m_u8): Likewise.
	(vqshlq_m_u32): Likewise.
	(vqshlq_m_u16): Likewise.
	(vqsubq_m_n_s8): Likewise.
	(vqsubq_m_n_s32): Likewise.
	(vqsubq_m_n_s16): Likewise.
	(vqsubq_m_n_u8): Likewise.
	(vqsubq_m_n_u32): Likewise.
	(vqsubq_m_n_u16): Likewise.
	(vqsubq_m_s8): Likewise.
	(vqsubq_m_s32): Likewise.
	(vqsubq_m_s16): Likewise.
	(vqsubq_m_u8): Likewise.
	(vqsubq_m_u32): Likewise.
	(vqsubq_m_u16): Likewise.
	(vrhaddq_m_s8): Likewise.
	(vrhaddq_m_s32): Likewise.
	(vrhaddq_m_s16): Likewise.
	(vrhaddq_m_u8): Likewise.
	(vrhaddq_m_u32): Likewise.
	(vrhaddq_m_u16): Likewise.
	(vrmulhq_m_s8): Likewise.
	(vrmulhq_m_s32): Likewise.
	(vrmulhq_m_s16): Likewise.
	(vrmulhq_m_u8): Likewise.
	(vrmulhq_m_u32): Likewise.
	(vrmulhq_m_u16): Likewise.
	(vrshlq_m_s8): Likewise.
	(vrshlq_m_s32): Likewise.
	(vrshlq_m_s16): Likewise.
	(vrshlq_m_u8): Likewise.
	(vrshlq_m_u32): Likewise.
	(vrshlq_m_u16): Likewise.
	(vrshrq_m_n_s8): Likewise.
	(vrshrq_m_n_s32): Likewise.
	(vrshrq_m_n_s16): Likewise.
	(vrshrq_m_n_u8): Likewise.
	(vrshrq_m_n_u32): Likewise.
	(vrshrq_m_n_u16): Likewise.
	(vshlq_m_n_s8): Likewise.
	(vshlq_m_n_s32): Likewise.
	(vshlq_m_n_s16): Likewise.
	(vshlq_m_n_u8): Likewise.
	(vshlq_m_n_u32): Likewise.
	(vshlq_m_n_u16): Likewise.
	(vshrq_m_n_s8): Likewise.
	(vshrq_m_n_s32): Likewise.
	(vshrq_m_n_s16): Likewise.
	(vshrq_m_n_u8): Likewise.
	(vshrq_m_n_u32): Likewise.
	(vshrq_m_n_u16): Likewise.
	(vsliq_m_n_s8): Likewise.
	(vsliq_m_n_s32): Likewise.
	(vsliq_m_n_s16): Likewise.
	(vsliq_m_n_u8): Likewise.
	(vsliq_m_n_u32): Likewise.
	(vsliq_m_n_u16): Likewise.
	(vsubq_m_n_s8): Likewise.
	(vsubq_m_n_s32): Likewise.
	(vsubq_m_n_s16): Likewise.
	(vsubq_m_n_u8): Likewise.
	(vsubq_m_n_u32): Likewise.
	(vsubq_m_n_u16): Likewise.
	(__arm_vabdq_m_s8): Define intrinsic.
	(__arm_vabdq_m_s32): Likewise.
	(__arm_vabdq_m_s16): Likewise.
	(__arm_vabdq_m_u8): Likewise.
	(__arm_vabdq_m_u32): Likewise.
	(__arm_vabdq_m_u16): Likewise.
	(__arm_vaddq_m_n_s8): Likewise.
	(__arm_vaddq_m_n_s32): Likewise.
	(__arm_vaddq_m_n_s16): Likewise.
	(__arm_vaddq_m_n_u8): Likewise.
	(__arm_vaddq_m_n_u32): Likewise.
	(__arm_vaddq_m_n_u16): Likewise.
	(__arm_vaddq_m_s8): Likewise.
	(__arm_vaddq_m_s32): Likewise.
	(__arm_vaddq_m_s16): Likewise.
	(__arm_vaddq_m_u8): Likewise.
	(__arm_vaddq_m_u32): Likewise.
	(__arm_vaddq_m_u16): Likewise.
	(__arm_vandq_m_s8): Likewise.
	(__arm_vandq_m_s32): Likewise.
	(__arm_vandq_m_s16): Likewise.
	(__arm_vandq_m_u8): Likewise.
	(__arm_vandq_m_u32): Likewise.
	(__arm_vandq_m_u16): Likewise.
	(__arm_vbicq_m_s8): Likewise.
	(__arm_vbicq_m_s32): Likewise.
	(__arm_vbicq_m_s16): Likewise.
	(__arm_vbicq_m_u8): Likewise.
	(__arm_vbicq_m_u32): Likewise.
	(__arm_vbicq_m_u16): Likewise.
	(__arm_vbrsrq_m_n_s8): Likewise.
	(__arm_vbrsrq_m_n_s32): Likewise.
	(__arm_vbrsrq_m_n_s16): Likewise.
	(__arm_vbrsrq_m_n_u8): Likewise.
	(__arm_vbrsrq_m_n_u32): Likewise.
	(__arm_vbrsrq_m_n_u16): Likewise.
	(__arm_vcaddq_rot270_m_s8): Likewise.
	(__arm_vcaddq_rot270_m_s32): Likewise.
	(__arm_vcaddq_rot270_m_s16): Likewise.
	(__arm_vcaddq_rot270_m_u8): Likewise.
	(__arm_vcaddq_rot270_m_u32): Likewise.
	(__arm_vcaddq_rot270_m_u16): Likewise.
	(__arm_vcaddq_rot90_m_s8): Likewise.
	(__arm_vcaddq_rot90_m_s32): Likewise.
	(__arm_vcaddq_rot90_m_s16): Likewise.
	(__arm_vcaddq_rot90_m_u8): Likewise.
	(__arm_vcaddq_rot90_m_u32): Likewise.
	(__arm_vcaddq_rot90_m_u16): Likewise.
	(__arm_veorq_m_s8): Likewise.
	(__arm_veorq_m_s32): Likewise.
	(__arm_veorq_m_s16): Likewise.
	(__arm_veorq_m_u8): Likewise.
	(__arm_veorq_m_u32): Likewise.
	(__arm_veorq_m_u16): Likewise.
	(__arm_vhaddq_m_n_s8): Likewise.
	(__arm_vhaddq_m_n_s32): Likewise.
	(__arm_vhaddq_m_n_s16): Likewise.
	(__arm_vhaddq_m_n_u8): Likewise.
	(__arm_vhaddq_m_n_u32): Likewise.
	(__arm_vhaddq_m_n_u16): Likewise.
	(__arm_vhaddq_m_s8): Likewise.
	(__arm_vhaddq_m_s32): Likewise.
	(__arm_vhaddq_m_s16): Likewise.
	(__arm_vhaddq_m_u8): Likewise.
	(__arm_vhaddq_m_u32): Likewise.
	(__arm_vhaddq_m_u16): Likewise.
	(__arm_vhcaddq_rot270_m_s8): Likewise.
	(__arm_vhcaddq_rot270_m_s32): Likewise.
	(__arm_vhcaddq_rot270_m_s16): Likewise.
	(__arm_vhcaddq_rot90_m_s8): Likewise.
	(__arm_vhcaddq_rot90_m_s32): Likewise.
	(__arm_vhcaddq_rot90_m_s16): Likewise.
	(__arm_vhsubq_m_n_s8): Likewise.
	(__arm_vhsubq_m_n_s32): Likewise.
	(__arm_vhsubq_m_n_s16): Likewise.
	(__arm_vhsubq_m_n_u8): Likewise.
	(__arm_vhsubq_m_n_u32): Likewise.
	(__arm_vhsubq_m_n_u16): Likewise.
	(__arm_vhsubq_m_s8): Likewise.
	(__arm_vhsubq_m_s32): Likewise.
	(__arm_vhsubq_m_s16): Likewise.
	(__arm_vhsubq_m_u8): Likewise.
	(__arm_vhsubq_m_u32): Likewise.
	(__arm_vhsubq_m_u16): Likewise.
	(__arm_vmaxq_m_s8): Likewise.
	(__arm_vmaxq_m_s32): Likewise.
	(__arm_vmaxq_m_s16): Likewise.
	(__arm_vmaxq_m_u8): Likewise.
	(__arm_vmaxq_m_u32): Likewise.
	(__arm_vmaxq_m_u16): Likewise.
	(__arm_vminq_m_s8): Likewise.
	(__arm_vminq_m_s32): Likewise.
	(__arm_vminq_m_s16): Likewise.
	(__arm_vminq_m_u8): Likewise.
	(__arm_vminq_m_u32): Likewise.
	(__arm_vminq_m_u16): Likewise.
	(__arm_vmladavaq_p_s8): Likewise.
	(__arm_vmladavaq_p_s32): Likewise.
	(__arm_vmladavaq_p_s16): Likewise.
	(__arm_vmladavaq_p_u8): Likewise.
	(__arm_vmladavaq_p_u32): Likewise.
	(__arm_vmladavaq_p_u16): Likewise.
	(__arm_vmladavaxq_p_s8): Likewise.
	(__arm_vmladavaxq_p_s32): Likewise.
	(__arm_vmladavaxq_p_s16): Likewise.
	(__arm_vmlaq_m_n_s8): Likewise.
	(__arm_vmlaq_m_n_s32): Likewise.
	(__arm_vmlaq_m_n_s16): Likewise.
	(__arm_vmlaq_m_n_u8): Likewise.
	(__arm_vmlaq_m_n_u32): Likewise.
	(__arm_vmlaq_m_n_u16): Likewise.
	(__arm_vmlasq_m_n_s8): Likewise.
	(__arm_vmlasq_m_n_s32): Likewise.
	(__arm_vmlasq_m_n_s16): Likewise.
	(__arm_vmlasq_m_n_u8): Likewise.
	(__arm_vmlasq_m_n_u32): Likewise.
	(__arm_vmlasq_m_n_u16): Likewise.
	(__arm_vmlsdavaq_p_s8): Likewise.
	(__arm_vmlsdavaq_p_s32): Likewise.
	(__arm_vmlsdavaq_p_s16): Likewise.
	(__arm_vmlsdavaxq_p_s8): Likewise.
	(__arm_vmlsdavaxq_p_s32): Likewise.
	(__arm_vmlsdavaxq_p_s16): Likewise.
	(__arm_vmulhq_m_s8): Likewise.
	(__arm_vmulhq_m_s32): Likewise.
	(__arm_vmulhq_m_s16): Likewise.
	(__arm_vmulhq_m_u8): Likewise.
	(__arm_vmulhq_m_u32): Likewise.
	(__arm_vmulhq_m_u16): Likewise.
	(__arm_vmullbq_int_m_s8): Likewise.
	(__arm_vmullbq_int_m_s32): Likewise.
	(__arm_vmullbq_int_m_s16): Likewise.
	(__arm_vmullbq_int_m_u8): Likewise.
	(__arm_vmullbq_int_m_u32): Likewise.
	(__arm_vmullbq_int_m_u16): Likewise.
	(__arm_vmulltq_int_m_s8): Likewise.
	(__arm_vmulltq_int_m_s32): Likewise.
	(__arm_vmulltq_int_m_s16): Likewise.
	(__arm_vmulltq_int_m_u8): Likewise.
	(__arm_vmulltq_int_m_u32): Likewise.
	(__arm_vmulltq_int_m_u16): Likewise.
	(__arm_vmulq_m_n_s8): Likewise.
	(__arm_vmulq_m_n_s32): Likewise.
	(__arm_vmulq_m_n_s16): Likewise.
	(__arm_vmulq_m_n_u8): Likewise.
	(__arm_vmulq_m_n_u32): Likewise.
	(__arm_vmulq_m_n_u16): Likewise.
	(__arm_vmulq_m_s8): Likewise.
	(__arm_vmulq_m_s32): Likewise.
	(__arm_vmulq_m_s16): Likewise.
	(__arm_vmulq_m_u8): Likewise.
	(__arm_vmulq_m_u32): Likewise.
	(__arm_vmulq_m_u16): Likewise.
	(__arm_vornq_m_s8): Likewise.
	(__arm_vornq_m_s32): Likewise.
	(__arm_vornq_m_s16): Likewise.
	(__arm_vornq_m_u8): Likewise.
	(__arm_vornq_m_u32): Likewise.
	(__arm_vornq_m_u16): Likewise.
	(__arm_vorrq_m_s8): Likewise.
	(__arm_vorrq_m_s32): Likewise.
	(__arm_vorrq_m_s16): Likewise.
	(__arm_vorrq_m_u8): Likewise.
	(__arm_vorrq_m_u32): Likewise.
	(__arm_vorrq_m_u16): Likewise.
	(__arm_vqaddq_m_n_s8): Likewise.
	(__arm_vqaddq_m_n_s32): Likewise.
	(__arm_vqaddq_m_n_s16): Likewise.
	(__arm_vqaddq_m_n_u8): Likewise.
	(__arm_vqaddq_m_n_u32): Likewise.
	(__arm_vqaddq_m_n_u16): Likewise.
	(__arm_vqaddq_m_s8): Likewise.
	(__arm_vqaddq_m_s32): Likewise.
	(__arm_vqaddq_m_s16): Likewise.
	(__arm_vqaddq_m_u8): Likewise.
	(__arm_vqaddq_m_u32): Likewise.
	(__arm_vqaddq_m_u16): Likewise.
	(__arm_vqdmladhq_m_s8): Likewise.
	(__arm_vqdmladhq_m_s32): Likewise.
	(__arm_vqdmladhq_m_s16): Likewise.
	(__arm_vqdmladhxq_m_s8): Likewise.
	(__arm_vqdmladhxq_m_s32): Likewise.
	(__arm_vqdmladhxq_m_s16): Likewise.
	(__arm_vqdmlahq_m_n_s8): Likewise.
	(__arm_vqdmlahq_m_n_s32): Likewise.
	(__arm_vqdmlahq_m_n_s16): Likewise.
	(__arm_vqdmlahq_m_n_u8): Likewise.
	(__arm_vqdmlahq_m_n_u32): Likewise.
	(__arm_vqdmlahq_m_n_u16): Likewise.
	(__arm_vqdmlsdhq_m_s8): Likewise.
	(__arm_vqdmlsdhq_m_s32): Likewise.
	(__arm_vqdmlsdhq_m_s16): Likewise.
	(__arm_vqdmlsdhxq_m_s8): Likewise.
	(__arm_vqdmlsdhxq_m_s32): Likewise.
	(__arm_vqdmlsdhxq_m_s16): Likewise.
	(__arm_vqdmulhq_m_n_s8): Likewise.
	(__arm_vqdmulhq_m_n_s32): Likewise.
	(__arm_vqdmulhq_m_n_s16): Likewise.
	(__arm_vqdmulhq_m_s8): Likewise.
	(__arm_vqdmulhq_m_s32): Likewise.
	(__arm_vqdmulhq_m_s16): Likewise.
	(__arm_vqrdmladhq_m_s8): Likewise.
	(__arm_vqrdmladhq_m_s32): Likewise.
	(__arm_vqrdmladhq_m_s16): Likewise.
	(__arm_vqrdmladhxq_m_s8): Likewise.
	(__arm_vqrdmladhxq_m_s32): Likewise.
	(__arm_vqrdmladhxq_m_s16): Likewise.
	(__arm_vqrdmlahq_m_n_s8): Likewise.
	(__arm_vqrdmlahq_m_n_s32): Likewise.
	(__arm_vqrdmlahq_m_n_s16): Likewise.
	(__arm_vqrdmlahq_m_n_u8): Likewise.
	(__arm_vqrdmlahq_m_n_u32): Likewise.
	(__arm_vqrdmlahq_m_n_u16): Likewise.
	(__arm_vqrdmlashq_m_n_s8): Likewise.
	(__arm_vqrdmlashq_m_n_s32): Likewise.
	(__arm_vqrdmlashq_m_n_s16): Likewise.
	(__arm_vqrdmlashq_m_n_u8): Likewise.
	(__arm_vqrdmlashq_m_n_u32): Likewise.
	(__arm_vqrdmlashq_m_n_u16): Likewise.
	(__arm_vqrdmlsdhq_m_s8): Likewise.
	(__arm_vqrdmlsdhq_m_s32): Likewise.
	(__arm_vqrdmlsdhq_m_s16): Likewise.
	(__arm_vqrdmlsdhxq_m_s8): Likewise.
	(__arm_vqrdmlsdhxq_m_s32): Likewise.
	(__arm_vqrdmlsdhxq_m_s16): Likewise.
	(__arm_vqrdmulhq_m_n_s8): Likewise.
	(__arm_vqrdmulhq_m_n_s32): Likewise.
	(__arm_vqrdmulhq_m_n_s16): Likewise.
	(__arm_vqrdmulhq_m_s8): Likewise.
	(__arm_vqrdmulhq_m_s32): Likewise.
	(__arm_vqrdmulhq_m_s16): Likewise.
	(__arm_vqrshlq_m_s8): Likewise.
	(__arm_vqrshlq_m_s32): Likewise.
	(__arm_vqrshlq_m_s16): Likewise.
	(__arm_vqrshlq_m_u8): Likewise.
	(__arm_vqrshlq_m_u32): Likewise.
	(__arm_vqrshlq_m_u16): Likewise.
	(__arm_vqshlq_m_n_s8): Likewise.
	(__arm_vqshlq_m_n_s32): Likewise.
	(__arm_vqshlq_m_n_s16): Likewise.
	(__arm_vqshlq_m_n_u8): Likewise.
	(__arm_vqshlq_m_n_u32): Likewise.
	(__arm_vqshlq_m_n_u16): Likewise.
	(__arm_vqshlq_m_s8): Likewise.
	(__arm_vqshlq_m_s32): Likewise.
	(__arm_vqshlq_m_s16): Likewise.
	(__arm_vqshlq_m_u8): Likewise.
	(__arm_vqshlq_m_u32): Likewise.
	(__arm_vqshlq_m_u16): Likewise.
	(__arm_vqsubq_m_n_s8): Likewise.
	(__arm_vqsubq_m_n_s32): Likewise.
	(__arm_vqsubq_m_n_s16): Likewise.
	(__arm_vqsubq_m_n_u8): Likewise.
	(__arm_vqsubq_m_n_u32): Likewise.
	(__arm_vqsubq_m_n_u16): Likewise.
	(__arm_vqsubq_m_s8): Likewise.
	(__arm_vqsubq_m_s32): Likewise.
	(__arm_vqsubq_m_s16): Likewise.
	(__arm_vqsubq_m_u8): Likewise.
	(__arm_vqsubq_m_u32): Likewise.
	(__arm_vqsubq_m_u16): Likewise.
	(__arm_vrhaddq_m_s8): Likewise.
	(__arm_vrhaddq_m_s32): Likewise.
	(__arm_vrhaddq_m_s16): Likewise.
	(__arm_vrhaddq_m_u8): Likewise.
	(__arm_vrhaddq_m_u32): Likewise.
	(__arm_vrhaddq_m_u16): Likewise.
	(__arm_vrmulhq_m_s8): Likewise.
	(__arm_vrmulhq_m_s32): Likewise.
	(__arm_vrmulhq_m_s16): Likewise.
	(__arm_vrmulhq_m_u8): Likewise.
	(__arm_vrmulhq_m_u32): Likewise.
	(__arm_vrmulhq_m_u16): Likewise.
	(__arm_vrshlq_m_s8): Likewise.
	(__arm_vrshlq_m_s32): Likewise.
	(__arm_vrshlq_m_s16): Likewise.
	(__arm_vrshlq_m_u8): Likewise.
	(__arm_vrshlq_m_u32): Likewise.
	(__arm_vrshlq_m_u16): Likewise.
	(__arm_vrshrq_m_n_s8): Likewise.
	(__arm_vrshrq_m_n_s32): Likewise.
	(__arm_vrshrq_m_n_s16): Likewise.
	(__arm_vrshrq_m_n_u8): Likewise.
	(__arm_vrshrq_m_n_u32): Likewise.
	(__arm_vrshrq_m_n_u16): Likewise.
	(__arm_vshlq_m_n_s8): Likewise.
	(__arm_vshlq_m_n_s32): Likewise.
	(__arm_vshlq_m_n_s16): Likewise.
	(__arm_vshlq_m_n_u8): Likewise.
	(__arm_vshlq_m_n_u32): Likewise.
	(__arm_vshlq_m_n_u16): Likewise.
	(__arm_vshrq_m_n_s8): Likewise.
	(__arm_vshrq_m_n_s32): Likewise.
	(__arm_vshrq_m_n_s16): Likewise.
	(__arm_vshrq_m_n_u8): Likewise.
	(__arm_vshrq_m_n_u32): Likewise.
	(__arm_vshrq_m_n_u16): Likewise.
	(__arm_vsliq_m_n_s8): Likewise.
	(__arm_vsliq_m_n_s32): Likewise.
	(__arm_vsliq_m_n_s16): Likewise.
	(__arm_vsliq_m_n_u8): Likewise.
	(__arm_vsliq_m_n_u32): Likewise.
	(__arm_vsliq_m_n_u16): Likewise.
	(__arm_vsubq_m_n_s8): Likewise.
	(__arm_vsubq_m_n_s32): Likewise.
	(__arm_vsubq_m_n_s16): Likewise.
	(__arm_vsubq_m_n_u8): Likewise.
	(__arm_vsubq_m_n_u32): Likewise.
	(__arm_vsubq_m_n_u16): Likewise.
	(vqdmladhq_m): Define polymorphic variant.
	(vqdmladhxq_m): Likewise.
	(vqdmlsdhq_m): Likewise.
	(vqdmlsdhxq_m): Likewise.
	(vabdq_m): Likewise.
	(vandq_m): Likewise.
	(vbicq_m): Likewise.
	(vbrsrq_m_n): Likewise.
	(vcaddq_rot270_m): Likewise.
	(vcaddq_rot90_m): Likewise.
	(veorq_m): Likewise.
	(vmaxq_m): Likewise.
	(vminq_m): Likewise.
	(vmladavaq_p): Likewise.
	(vmlaq_m_n): Likewise.
	(vmlasq_m_n): Likewise.
	(vmulhq_m): Likewise.
	(vmullbq_int_m): Likewise.
	(vmulltq_int_m): Likewise.
	(vornq_m): Likewise.
	(vorrq_m): Likewise.
	(vqdmlahq_m_n): Likewise.
	(vqrdmlahq_m_n): Likewise.
	(vqrdmlashq_m_n): Likewise.
	(vqrshlq_m): Likewise.
	(vqshlq_m_n): Likewise.
	(vqshlq_m): Likewise.
	(vrhaddq_m): Likewise.
	(vrmulhq_m): Likewise.
	(vrshlq_m): Likewise.
	(vrshrq_m_n): Likewise.
	(vshlq_m_n): Likewise.
	(vshrq_m_n): Likewise.
	(vsliq_m): Likewise.
	(vaddq_m_n): Likewise.
	(vaddq_m): Likewise.
	(vhaddq_m_n): Likewise.
	(vhaddq_m): Likewise.
	(vhcaddq_rot270_m): Likewise.
	(vhcaddq_rot90_m): Likewise.
	(vhsubq_m): Likewise.
	(vhsubq_m_n): Likewise.
	(vmulq_m_n): Likewise.
	(vmulq_m): Likewise.
	(vqaddq_m_n): Likewise.
	(vqaddq_m): Likewise.
	(vqdmulhq_m_n): Likewise.
	(vqdmulhq_m): Likewise.
	(vsubq_m_n): Likewise.
	(vsliq_m_n): Likewise.
	(vqsubq_m_n): Likewise.
	(vqsubq_m): Likewise.
	(vqrdmulhq_m): Likewise.
	(vqrdmulhq_m_n): Likewise.
	(vqrdmlsdhxq_m): Likewise.
	(vqrdmlsdhq_m): Likewise.
	(vqrdmladhq_m): Likewise.
	(vqrdmladhxq_m): Likewise.
	(vmlsdavaxq_p): Likewise.
	(vmlsdavaq_p): Likewise.
	(vmladavaxq_p): Likewise.
	* config/arm/arm_mve_builtins.def (QUADOP_NONE_NONE_NONE_IMM_UNONE): Use
	builtin qualifier.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_IMM_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_NONE_UNONE): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_UNONE_UNONE): Likewise.
	* config/arm/mve.md (VHSUBQ_M): Define iterators.
	(VSLIQ_M_N): Likewise.
	(VQRDMLAHQ_M_N): Likewise.
	(VRSHLQ_M): Likewise.
	(VMINQ_M): Likewise.
	(VMULLBQ_INT_M): Likewise.
	(VMULHQ_M): Likewise.
	(VMULQ_M): Likewise.
	(VHSUBQ_M_N): Likewise.
	(VHADDQ_M_N): Likewise.
	(VORRQ_M): Likewise.
	(VRMULHQ_M): Likewise.
	(VQADDQ_M): Likewise.
	(VRSHRQ_M_N): Likewise.
	(VQSUBQ_M_N): Likewise.
	(VADDQ_M): Likewise.
	(VORNQ_M): Likewise.
	(VQDMLAHQ_M_N): Likewise.
	(VRHADDQ_M): Likewise.
	(VQSHLQ_M): Likewise.
	(VANDQ_M): Likewise.
	(VBICQ_M): Likewise.
	(VSHLQ_M_N): Likewise.
	(VCADDQ_ROT270_M): Likewise.
	(VQRSHLQ_M): Likewise.
	(VQADDQ_M_N): Likewise.
	(VADDQ_M_N): Likewise.
	(VMAXQ_M): Likewise.
	(VQSUBQ_M): Likewise.
	(VMLASQ_M_N): Likewise.
	(VMLADAVAQ_P): Likewise.
	(VBRSRQ_M_N): Likewise.
	(VMULQ_M_N): Likewise.
	(VCADDQ_ROT90_M): Likewise.
	(VMULLTQ_INT_M): Likewise.
	(VEORQ_M): Likewise.
	(VSHRQ_M_N): Likewise.
	(VSUBQ_M_N): Likewise.
	(VHADDQ_M): Likewise.
	(VABDQ_M): Likewise.
	(VQRDMLASHQ_M_N): Likewise.
	(VMLAQ_M_N): Likewise.
	(VQSHLQ_M_N): Likewise.
	(mve_vabdq_m_<supf><mode>): Define RTL pattern.
	(mve_vaddq_m_n_<supf><mode>): Likewise.
	(mve_vaddq_m_<supf><mode>): Likewise.
	(mve_vandq_m_<supf><mode>): Likewise.
	(mve_vbicq_m_<supf><mode>): Likewise.
	(mve_vbrsrq_m_n_<supf><mode>): Likewise.
	(mve_vcaddq_rot270_m_<supf><mode>): Likewise.
	(mve_vcaddq_rot90_m_<supf><mode>): Likewise.
	(mve_veorq_m_<supf><mode>): Likewise.
	(mve_vhaddq_m_n_<supf><mode>): Likewise.
	(mve_vhaddq_m_<supf><mode>): Likewise.
	(mve_vhsubq_m_n_<supf><mode>): Likewise.
	(mve_vhsubq_m_<supf><mode>): Likewise.
	(mve_vmaxq_m_<supf><mode>): Likewise.
	(mve_vminq_m_<supf><mode>): Likewise.
	(mve_vmladavaq_p_<supf><mode>): Likewise.
	(mve_vmlaq_m_n_<supf><mode>): Likewise.
	(mve_vmlasq_m_n_<supf><mode>): Likewise.
	(mve_vmulhq_m_<supf><mode>): Likewise.
	(mve_vmullbq_int_m_<supf><mode>): Likewise.
	(mve_vmulltq_int_m_<supf><mode>): Likewise.
	(mve_vmulq_m_n_<supf><mode>): Likewise.
	(mve_vmulq_m_<supf><mode>): Likewise.
	(mve_vornq_m_<supf><mode>): Likewise.
	(mve_vorrq_m_<supf><mode>): Likewise.
	(mve_vqaddq_m_n_<supf><mode>): Likewise.
	(mve_vqaddq_m_<supf><mode>): Likewise.
	(mve_vqdmlahq_m_n_<supf><mode>): Likewise.
	(mve_vqrdmlahq_m_n_<supf><mode>): Likewise.
	(mve_vqrdmlashq_m_n_<supf><mode>): Likewise.
	(mve_vqrshlq_m_<supf><mode>): Likewise.
	(mve_vqshlq_m_n_<supf><mode>): Likewise.
	(mve_vqshlq_m_<supf><mode>): Likewise.
	(mve_vqsubq_m_n_<supf><mode>): Likewise.
	(mve_vqsubq_m_<supf><mode>): Likewise.
	(mve_vrhaddq_m_<supf><mode>): Likewise.
	(mve_vrmulhq_m_<supf><mode>): Likewise.
	(mve_vrshlq_m_<supf><mode>): Likewise.
	(mve_vrshrq_m_n_<supf><mode>): Likewise.
	(mve_vshlq_m_n_<supf><mode>): Likewise.
	(mve_vshrq_m_n_<supf><mode>): Likewise.
	(mve_vsliq_m_n_<supf><mode>): Likewise.
	(mve_vsubq_m_n_<supf><mode>): Likewise.
	(mve_vhcaddq_rot270_m_s<mode>): Likewise.
	(mve_vhcaddq_rot90_m_s<mode>): Likewise.
	(mve_vmladavaxq_p_s<mode>): Likewise.
	(mve_vmlsdavaq_p_s<mode>): Likewise.
	(mve_vmlsdavaxq_p_s<mode>): Likewise.
	(mve_vqdmladhq_m_s<mode>): Likewise.
	(mve_vqdmladhxq_m_s<mode>): Likewise.
	(mve_vqdmlsdhq_m_s<mode>): Likewise.
	(mve_vqdmlsdhxq_m_s<mode>): Likewise.
	(mve_vqdmulhq_m_n_s<mode>): Likewise.
	(mve_vqdmulhq_m_s<mode>): Likewise.
	(mve_vqrdmladhq_m_s<mode>): Likewise.
	(mve_vqrdmladhxq_m_s<mode>): Likewise.
	(mve_vqrdmlsdhq_m_s<mode>): Likewise.
	(mve_vqrdmlsdhxq_m_s<mode>): Likewise.
	(mve_vqrdmulhq_m_n_s<mode>): Likewise.
	(mve_vqrdmulhq_m_s<mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (QUADOP_UNONE_UNONE_NONE_NONE_UNONE_QUALIFIERS):
	Define builtin qualifier.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(QUADOP_NONE_NONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_NONE_NONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_NONE_UNONE_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vsriq_m_n_s8): Define macro.
	(vsubq_m_s8): Likewise.
	(vcvtq_m_n_f16_u16): Likewise.
	(vqshluq_m_n_s8): Likewise.
	(vabavq_p_s8): Likewise.
	(vsriq_m_n_u8): Likewise.
	(vshlq_m_u8): Likewise.
	(vsubq_m_u8): Likewise.
	(vabavq_p_u8): Likewise.
	(vshlq_m_s8): Likewise.
	(vcvtq_m_n_f16_s16): Likewise.
	(vsriq_m_n_s16): Likewise.
	(vsubq_m_s16): Likewise.
	(vcvtq_m_n_f32_u32): Likewise.
	(vqshluq_m_n_s16): Likewise.
	(vabavq_p_s16): Likewise.
	(vsriq_m_n_u16): Likewise.
	(vshlq_m_u16): Likewise.
	(vsubq_m_u16): Likewise.
	(vabavq_p_u16): Likewise.
	(vshlq_m_s16): Likewise.
	(vcvtq_m_n_f32_s32): Likewise.
	(vsriq_m_n_s32): Likewise.
	(vsubq_m_s32): Likewise.
	(vqshluq_m_n_s32): Likewise.
	(vabavq_p_s32): Likewise.
	(vsriq_m_n_u32): Likewise.
	(vshlq_m_u32): Likewise.
	(vsubq_m_u32): Likewise.
	(vabavq_p_u32): Likewise.
	(vshlq_m_s32): Likewise.
	(__arm_vsriq_m_n_s8): Define intrinsic.
	(__arm_vsubq_m_s8): Likewise.
	(__arm_vqshluq_m_n_s8): Likewise.
	(__arm_vabavq_p_s8): Likewise.
	(__arm_vsriq_m_n_u8): Likewise.
	(__arm_vshlq_m_u8): Likewise.
	(__arm_vsubq_m_u8): Likewise.
	(__arm_vabavq_p_u8): Likewise.
	(__arm_vshlq_m_s8): Likewise.
	(__arm_vsriq_m_n_s16): Likewise.
	(__arm_vsubq_m_s16): Likewise.
	(__arm_vqshluq_m_n_s16): Likewise.
	(__arm_vabavq_p_s16): Likewise.
	(__arm_vsriq_m_n_u16): Likewise.
	(__arm_vshlq_m_u16): Likewise.
	(__arm_vsubq_m_u16): Likewise.
	(__arm_vabavq_p_u16): Likewise.
	(__arm_vshlq_m_s16): Likewise.
	(__arm_vsriq_m_n_s32): Likewise.
	(__arm_vsubq_m_s32): Likewise.
	(__arm_vqshluq_m_n_s32): Likewise.
	(__arm_vabavq_p_s32): Likewise.
	(__arm_vsriq_m_n_u32): Likewise.
	(__arm_vshlq_m_u32): Likewise.
	(__arm_vsubq_m_u32): Likewise.
	(__arm_vabavq_p_u32): Likewise.
	(__arm_vshlq_m_s32): Likewise.
	(__arm_vcvtq_m_n_f16_u16): Likewise.
	(__arm_vcvtq_m_n_f16_s16): Likewise.
	(__arm_vcvtq_m_n_f32_u32): Likewise.
	(__arm_vcvtq_m_n_f32_s32): Likewise.
	(vcvtq_m_n): Define polymorphic variant.
	(vqshluq_m_n): Likewise.
	(vshlq_m): Likewise.
	(vsriq_m_n): Likewise.
	(vsubq_m): Likewise.
	(vabavq_p): Likewise.
	* config/arm/arm_mve_builtins.def
	(QUADOP_UNONE_UNONE_NONE_NONE_UNONE_QUALIFIERS): Use builtin qualifier.
	(QUADOP_NONE_NONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(QUADOP_NONE_NONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_NONE_NONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(QUADOP_UNONE_UNONE_UNONE_NONE_UNONE_QUALIFIERS): Likewise.
	* config/arm/mve.md (VABAVQ_P): Define iterator.
	(VSHLQ_M): Likewise.
	(VSRIQ_M_N): Likewise.
	(VSUBQ_M): Likewise.
	(VCVTQ_M_N_TO_F): Likewise.
	(mve_vabavq_p_<supf><mode>): Define RTL pattern.
	(mve_vqshluq_m_n_s<mode>): Likewise.
	(mve_vshlq_m_<supf><mode>): Likewise.
	(mve_vsriq_m_n_<supf><mode>): Likewise.
	(mve_vsubq_m_<supf><mode>): Likewise.
	(mve_vcvtq_m_n_to_f_<supf><mode>): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vrmlaldavhaxq_s32): Define macro.
	(vrmlsldavhaq_s32): Likewise.
	(vrmlsldavhaxq_s32): Likewise.
	(vaddlvaq_p_s32): Likewise.
	(vcvtbq_m_f16_f32): Likewise.
	(vcvtbq_m_f32_f16): Likewise.
	(vcvttq_m_f16_f32): Likewise.
	(vcvttq_m_f32_f16): Likewise.
	(vrev16q_m_s8): Likewise.
	(vrev32q_m_f16): Likewise.
	(vrmlaldavhq_p_s32): Likewise.
	(vrmlaldavhxq_p_s32): Likewise.
	(vrmlsldavhq_p_s32): Likewise.
	(vrmlsldavhxq_p_s32): Likewise.
	(vaddlvaq_p_u32): Likewise.
	(vrev16q_m_u8): Likewise.
	(vrmlaldavhq_p_u32): Likewise.
	(vmvnq_m_n_s16): Likewise.
	(vorrq_m_n_s16): Likewise.
	(vqrshrntq_n_s16): Likewise.
	(vqshrnbq_n_s16): Likewise.
	(vqshrntq_n_s16): Likewise.
	(vrshrnbq_n_s16): Likewise.
	(vrshrntq_n_s16): Likewise.
	(vshrnbq_n_s16): Likewise.
	(vshrntq_n_s16): Likewise.
	(vcmlaq_f16): Likewise.
	(vcmlaq_rot180_f16): Likewise.
	(vcmlaq_rot270_f16): Likewise.
	(vcmlaq_rot90_f16): Likewise.
	(vfmaq_f16): Likewise.
	(vfmaq_n_f16): Likewise.
	(vfmasq_n_f16): Likewise.
	(vfmsq_f16): Likewise.
	(vmlaldavaq_s16): Likewise.
	(vmlaldavaxq_s16): Likewise.
	(vmlsldavaq_s16): Likewise.
	(vmlsldavaxq_s16): Likewise.
	(vabsq_m_f16): Likewise.
	(vcvtmq_m_s16_f16): Likewise.
	(vcvtnq_m_s16_f16): Likewise.
	(vcvtpq_m_s16_f16): Likewise.
	(vcvtq_m_s16_f16): Likewise.
	(vdupq_m_n_f16): Likewise.
	(vmaxnmaq_m_f16): Likewise.
	(vmaxnmavq_p_f16): Likewise.
	(vmaxnmvq_p_f16): Likewise.
	(vminnmaq_m_f16): Likewise.
	(vminnmavq_p_f16): Likewise.
	(vminnmvq_p_f16): Likewise.
	(vmlaldavq_p_s16): Likewise.
	(vmlaldavxq_p_s16): Likewise.
	(vmlsldavq_p_s16): Likewise.
	(vmlsldavxq_p_s16): Likewise.
	(vmovlbq_m_s8): Likewise.
	(vmovltq_m_s8): Likewise.
	(vmovnbq_m_s16): Likewise.
	(vmovntq_m_s16): Likewise.
	(vnegq_m_f16): Likewise.
	(vpselq_f16): Likewise.
	(vqmovnbq_m_s16): Likewise.
	(vqmovntq_m_s16): Likewise.
	(vrev32q_m_s8): Likewise.
	(vrev64q_m_f16): Likewise.
	(vrndaq_m_f16): Likewise.
	(vrndmq_m_f16): Likewise.
	(vrndnq_m_f16): Likewise.
	(vrndpq_m_f16): Likewise.
	(vrndq_m_f16): Likewise.
	(vrndxq_m_f16): Likewise.
	(vcmpeqq_m_n_f16): Likewise.
	(vcmpgeq_m_f16): Likewise.
	(vcmpgeq_m_n_f16): Likewise.
	(vcmpgtq_m_f16): Likewise.
	(vcmpgtq_m_n_f16): Likewise.
	(vcmpleq_m_f16): Likewise.
	(vcmpleq_m_n_f16): Likewise.
	(vcmpltq_m_f16): Likewise.
	(vcmpltq_m_n_f16): Likewise.
	(vcmpneq_m_f16): Likewise.
	(vcmpneq_m_n_f16): Likewise.
	(vmvnq_m_n_u16): Likewise.
	(vorrq_m_n_u16): Likewise.
	(vqrshruntq_n_s16): Likewise.
	(vqshrunbq_n_s16): Likewise.
	(vqshruntq_n_s16): Likewise.
	(vcvtmq_m_u16_f16): Likewise.
	(vcvtnq_m_u16_f16): Likewise.
	(vcvtpq_m_u16_f16): Likewise.
	(vcvtq_m_u16_f16): Likewise.
	(vqmovunbq_m_s16): Likewise.
	(vqmovuntq_m_s16): Likewise.
	(vqrshrntq_n_u16): Likewise.
	(vqshrnbq_n_u16): Likewise.
	(vqshrntq_n_u16): Likewise.
	(vrshrnbq_n_u16): Likewise.
	(vrshrntq_n_u16): Likewise.
	(vshrnbq_n_u16): Likewise.
	(vshrntq_n_u16): Likewise.
	(vmlaldavaq_u16): Likewise.
	(vmlaldavaxq_u16): Likewise.
	(vmlaldavq_p_u16): Likewise.
	(vmlaldavxq_p_u16): Likewise.
	(vmovlbq_m_u8): Likewise.
	(vmovltq_m_u8): Likewise.
	(vmovnbq_m_u16): Likewise.
	(vmovntq_m_u16): Likewise.
	(vqmovnbq_m_u16): Likewise.
	(vqmovntq_m_u16): Likewise.
	(vrev32q_m_u8): Likewise.
	(vmvnq_m_n_s32): Likewise.
	(vorrq_m_n_s32): Likewise.
	(vqrshrntq_n_s32): Likewise.
	(vqshrnbq_n_s32): Likewise.
	(vqshrntq_n_s32): Likewise.
	(vrshrnbq_n_s32): Likewise.
	(vrshrntq_n_s32): Likewise.
	(vshrnbq_n_s32): Likewise.
	(vshrntq_n_s32): Likewise.
	(vcmlaq_f32): Likewise.
	(vcmlaq_rot180_f32): Likewise.
	(vcmlaq_rot270_f32): Likewise.
	(vcmlaq_rot90_f32): Likewise.
	(vfmaq_f32): Likewise.
	(vfmaq_n_f32): Likewise.
	(vfmasq_n_f32): Likewise.
	(vfmsq_f32): Likewise.
	(vmlaldavaq_s32): Likewise.
	(vmlaldavaxq_s32): Likewise.
	(vmlsldavaq_s32): Likewise.
	(vmlsldavaxq_s32): Likewise.
	(vabsq_m_f32): Likewise.
	(vcvtmq_m_s32_f32): Likewise.
	(vcvtnq_m_s32_f32): Likewise.
	(vcvtpq_m_s32_f32): Likewise.
	(vcvtq_m_s32_f32): Likewise.
	(vdupq_m_n_f32): Likewise.
	(vmaxnmaq_m_f32): Likewise.
	(vmaxnmavq_p_f32): Likewise.
	(vmaxnmvq_p_f32): Likewise.
	(vminnmaq_m_f32): Likewise.
	(vminnmavq_p_f32): Likewise.
	(vminnmvq_p_f32): Likewise.
	(vmlaldavq_p_s32): Likewise.
	(vmlaldavxq_p_s32): Likewise.
	(vmlsldavq_p_s32): Likewise.
	(vmlsldavxq_p_s32): Likewise.
	(vmovlbq_m_s16): Likewise.
	(vmovltq_m_s16): Likewise.
	(vmovnbq_m_s32): Likewise.
	(vmovntq_m_s32): Likewise.
	(vnegq_m_f32): Likewise.
	(vpselq_f32): Likewise.
	(vqmovnbq_m_s32): Likewise.
	(vqmovntq_m_s32): Likewise.
	(vrev32q_m_s16): Likewise.
	(vrev64q_m_f32): Likewise.
	(vrndaq_m_f32): Likewise.
	(vrndmq_m_f32): Likewise.
	(vrndnq_m_f32): Likewise.
	(vrndpq_m_f32): Likewise.
	(vrndq_m_f32): Likewise.
	(vrndxq_m_f32): Likewise.
	(vcmpeqq_m_n_f32): Likewise.
	(vcmpgeq_m_f32): Likewise.
	(vcmpgeq_m_n_f32): Likewise.
	(vcmpgtq_m_f32): Likewise.
	(vcmpgtq_m_n_f32): Likewise.
	(vcmpleq_m_f32): Likewise.
	(vcmpleq_m_n_f32): Likewise.
	(vcmpltq_m_f32): Likewise.
	(vcmpltq_m_n_f32): Likewise.
	(vcmpneq_m_f32): Likewise.
	(vcmpneq_m_n_f32): Likewise.
	(vmvnq_m_n_u32): Likewise.
	(vorrq_m_n_u32): Likewise.
	(vqrshruntq_n_s32): Likewise.
	(vqshrunbq_n_s32): Likewise.
	(vqshruntq_n_s32): Likewise.
	(vcvtmq_m_u32_f32): Likewise.
	(vcvtnq_m_u32_f32): Likewise.
	(vcvtpq_m_u32_f32): Likewise.
	(vcvtq_m_u32_f32): Likewise.
	(vqmovunbq_m_s32): Likewise.
	(vqmovuntq_m_s32): Likewise.
	(vqrshrntq_n_u32): Likewise.
	(vqshrnbq_n_u32): Likewise.
	(vqshrntq_n_u32): Likewise.
	(vrshrnbq_n_u32): Likewise.
	(vrshrntq_n_u32): Likewise.
	(vshrnbq_n_u32): Likewise.
	(vshrntq_n_u32): Likewise.
	(vmlaldavaq_u32): Likewise.
	(vmlaldavaxq_u32): Likewise.
	(vmlaldavq_p_u32): Likewise.
	(vmlaldavxq_p_u32): Likewise.
	(vmovlbq_m_u16): Likewise.
	(vmovltq_m_u16): Likewise.
	(vmovnbq_m_u32): Likewise.
	(vmovntq_m_u32): Likewise.
	(vqmovnbq_m_u32): Likewise.
	(vqmovntq_m_u32): Likewise.
	(vrev32q_m_u16): Likewise.
	(__arm_vrmlaldavhaxq_s32): Define intrinsic.
	(__arm_vrmlsldavhaq_s32): Likewise.
	(__arm_vrmlsldavhaxq_s32): Likewise.
	(__arm_vaddlvaq_p_s32): Likewise.
	(__arm_vrev16q_m_s8): Likewise.
	(__arm_vrmlaldavhq_p_s32): Likewise.
	(__arm_vrmlaldavhxq_p_s32): Likewise.
	(__arm_vrmlsldavhq_p_s32): Likewise.
	(__arm_vrmlsldavhxq_p_s32): Likewise.
	(__arm_vaddlvaq_p_u32): Likewise.
	(__arm_vrev16q_m_u8): Likewise.
	(__arm_vrmlaldavhq_p_u32): Likewise.
	(__arm_vmvnq_m_n_s16): Likewise.
	(__arm_vorrq_m_n_s16): Likewise.
	(__arm_vqrshrntq_n_s16): Likewise.
	(__arm_vqshrnbq_n_s16): Likewise.
	(__arm_vqshrntq_n_s16): Likewise.
	(__arm_vrshrnbq_n_s16): Likewise.
	(__arm_vrshrntq_n_s16): Likewise.
	(__arm_vshrnbq_n_s16): Likewise.
	(__arm_vshrntq_n_s16): Likewise.
	(__arm_vmlaldavaq_s16): Likewise.
	(__arm_vmlaldavaxq_s16): Likewise.
	(__arm_vmlsldavaq_s16): Likewise.
	(__arm_vmlsldavaxq_s16): Likewise.
	(__arm_vmlaldavq_p_s16): Likewise.
	(__arm_vmlaldavxq_p_s16): Likewise.
	(__arm_vmlsldavq_p_s16): Likewise.
	(__arm_vmlsldavxq_p_s16): Likewise.
	(__arm_vmovlbq_m_s8): Likewise.
	(__arm_vmovltq_m_s8): Likewise.
	(__arm_vmovnbq_m_s16): Likewise.
	(__arm_vmovntq_m_s16): Likewise.
	(__arm_vqmovnbq_m_s16): Likewise.
	(__arm_vqmovntq_m_s16): Likewise.
	(__arm_vrev32q_m_s8): Likewise.
	(__arm_vmvnq_m_n_u16): Likewise.
	(__arm_vorrq_m_n_u16): Likewise.
	(__arm_vqrshruntq_n_s16): Likewise.
	(__arm_vqshrunbq_n_s16): Likewise.
	(__arm_vqshruntq_n_s16): Likewise.
	(__arm_vqmovunbq_m_s16): Likewise.
	(__arm_vqmovuntq_m_s16): Likewise.
	(__arm_vqrshrntq_n_u16): Likewise.
	(__arm_vqshrnbq_n_u16): Likewise.
	(__arm_vqshrntq_n_u16): Likewise.
	(__arm_vrshrnbq_n_u16): Likewise.
	(__arm_vrshrntq_n_u16): Likewise.
	(__arm_vshrnbq_n_u16): Likewise.
	(__arm_vshrntq_n_u16): Likewise.
	(__arm_vmlaldavaq_u16): Likewise.
	(__arm_vmlaldavaxq_u16): Likewise.
	(__arm_vmlaldavq_p_u16): Likewise.
	(__arm_vmlaldavxq_p_u16): Likewise.
	(__arm_vmovlbq_m_u8): Likewise.
	(__arm_vmovltq_m_u8): Likewise.
	(__arm_vmovnbq_m_u16): Likewise.
	(__arm_vmovntq_m_u16): Likewise.
	(__arm_vqmovnbq_m_u16): Likewise.
	(__arm_vqmovntq_m_u16): Likewise.
	(__arm_vrev32q_m_u8): Likewise.
	(__arm_vmvnq_m_n_s32): Likewise.
	(__arm_vorrq_m_n_s32): Likewise.
	(__arm_vqrshrntq_n_s32): Likewise.
	(__arm_vqshrnbq_n_s32): Likewise.
	(__arm_vqshrntq_n_s32): Likewise.
	(__arm_vrshrnbq_n_s32): Likewise.
	(__arm_vrshrntq_n_s32): Likewise.
	(__arm_vshrnbq_n_s32): Likewise.
	(__arm_vshrntq_n_s32): Likewise.
	(__arm_vmlaldavaq_s32): Likewise.
	(__arm_vmlaldavaxq_s32): Likewise.
	(__arm_vmlsldavaq_s32): Likewise.
	(__arm_vmlsldavaxq_s32): Likewise.
	(__arm_vmlaldavq_p_s32): Likewise.
	(__arm_vmlaldavxq_p_s32): Likewise.
	(__arm_vmlsldavq_p_s32): Likewise.
	(__arm_vmlsldavxq_p_s32): Likewise.
	(__arm_vmovlbq_m_s16): Likewise.
	(__arm_vmovltq_m_s16): Likewise.
	(__arm_vmovnbq_m_s32): Likewise.
	(__arm_vmovntq_m_s32): Likewise.
	(__arm_vqmovnbq_m_s32): Likewise.
	(__arm_vqmovntq_m_s32): Likewise.
	(__arm_vrev32q_m_s16): Likewise.
	(__arm_vmvnq_m_n_u32): Likewise.
	(__arm_vorrq_m_n_u32): Likewise.
	(__arm_vqrshruntq_n_s32): Likewise.
	(__arm_vqshrunbq_n_s32): Likewise.
	(__arm_vqshruntq_n_s32): Likewise.
	(__arm_vqmovunbq_m_s32): Likewise.
	(__arm_vqmovuntq_m_s32): Likewise.
	(__arm_vqrshrntq_n_u32): Likewise.
	(__arm_vqshrnbq_n_u32): Likewise.
	(__arm_vqshrntq_n_u32): Likewise.
	(__arm_vrshrnbq_n_u32): Likewise.
	(__arm_vrshrntq_n_u32): Likewise.
	(__arm_vshrnbq_n_u32): Likewise.
	(__arm_vshrntq_n_u32): Likewise.
	(__arm_vmlaldavaq_u32): Likewise.
	(__arm_vmlaldavaxq_u32): Likewise.
	(__arm_vmlaldavq_p_u32): Likewise.
	(__arm_vmlaldavxq_p_u32): Likewise.
	(__arm_vmovlbq_m_u16): Likewise.
	(__arm_vmovltq_m_u16): Likewise.
	(__arm_vmovnbq_m_u32): Likewise.
	(__arm_vmovntq_m_u32): Likewise.
	(__arm_vqmovnbq_m_u32): Likewise.
	(__arm_vqmovntq_m_u32): Likewise.
	(__arm_vrev32q_m_u16): Likewise.
	(__arm_vcvtbq_m_f16_f32): Likewise.
	(__arm_vcvtbq_m_f32_f16): Likewise.
	(__arm_vcvttq_m_f16_f32): Likewise.
	(__arm_vcvttq_m_f32_f16): Likewise.
	(__arm_vrev32q_m_f16): Likewise.
	(__arm_vcmlaq_f16): Likewise.
	(__arm_vcmlaq_rot180_f16): Likewise.
	(__arm_vcmlaq_rot270_f16): Likewise.
	(__arm_vcmlaq_rot90_f16): Likewise.
	(__arm_vfmaq_f16): Likewise.
	(__arm_vfmaq_n_f16): Likewise.
	(__arm_vfmasq_n_f16): Likewise.
	(__arm_vfmsq_f16): Likewise.
	(__arm_vabsq_m_f16): Likewise.
	(__arm_vcvtmq_m_s16_f16): Likewise.
	(__arm_vcvtnq_m_s16_f16): Likewise.
	(__arm_vcvtpq_m_s16_f16): Likewise.
	(__arm_vcvtq_m_s16_f16): Likewise.
	(__arm_vdupq_m_n_f16): Likewise.
	(__arm_vmaxnmaq_m_f16): Likewise.
	(__arm_vmaxnmavq_p_f16): Likewise.
	(__arm_vmaxnmvq_p_f16): Likewise.
	(__arm_vminnmaq_m_f16): Likewise.
	(__arm_vminnmavq_p_f16): Likewise.
	(__arm_vminnmvq_p_f16): Likewise.
	(__arm_vnegq_m_f16): Likewise.
	(__arm_vpselq_f16): Likewise.
	(__arm_vrev64q_m_f16): Likewise.
	(__arm_vrndaq_m_f16): Likewise.
	(__arm_vrndmq_m_f16): Likewise.
	(__arm_vrndnq_m_f16): Likewise.
	(__arm_vrndpq_m_f16): Likewise.
	(__arm_vrndq_m_f16): Likewise.
	(__arm_vrndxq_m_f16): Likewise.
	(__arm_vcmpeqq_m_n_f16): Likewise.
	(__arm_vcmpgeq_m_f16): Likewise.
	(__arm_vcmpgeq_m_n_f16): Likewise.
	(__arm_vcmpgtq_m_f16): Likewise.
	(__arm_vcmpgtq_m_n_f16): Likewise.
	(__arm_vcmpleq_m_f16): Likewise.
	(__arm_vcmpleq_m_n_f16): Likewise.
	(__arm_vcmpltq_m_f16): Likewise.
	(__arm_vcmpltq_m_n_f16): Likewise.
	(__arm_vcmpneq_m_f16): Likewise.
	(__arm_vcmpneq_m_n_f16): Likewise.
	(__arm_vcvtmq_m_u16_f16): Likewise.
	(__arm_vcvtnq_m_u16_f16): Likewise.
	(__arm_vcvtpq_m_u16_f16): Likewise.
	(__arm_vcvtq_m_u16_f16): Likewise.
	(__arm_vcmlaq_f32): Likewise.
	(__arm_vcmlaq_rot180_f32): Likewise.
	(__arm_vcmlaq_rot270_f32): Likewise.
	(__arm_vcmlaq_rot90_f32): Likewise.
	(__arm_vfmaq_f32): Likewise.
	(__arm_vfmaq_n_f32): Likewise.
	(__arm_vfmasq_n_f32): Likewise.
	(__arm_vfmsq_f32): Likewise.
	(__arm_vabsq_m_f32): Likewise.
	(__arm_vcvtmq_m_s32_f32): Likewise.
	(__arm_vcvtnq_m_s32_f32): Likewise.
	(__arm_vcvtpq_m_s32_f32): Likewise.
	(__arm_vcvtq_m_s32_f32): Likewise.
	(__arm_vdupq_m_n_f32): Likewise.
	(__arm_vmaxnmaq_m_f32): Likewise.
	(__arm_vmaxnmavq_p_f32): Likewise.
	(__arm_vmaxnmvq_p_f32): Likewise.
	(__arm_vminnmaq_m_f32): Likewise.
	(__arm_vminnmavq_p_f32): Likewise.
	(__arm_vminnmvq_p_f32): Likewise.
	(__arm_vnegq_m_f32): Likewise.
	(__arm_vpselq_f32): Likewise.
	(__arm_vrev64q_m_f32): Likewise.
	(__arm_vrndaq_m_f32): Likewise.
	(__arm_vrndmq_m_f32): Likewise.
	(__arm_vrndnq_m_f32): Likewise.
	(__arm_vrndpq_m_f32): Likewise.
	(__arm_vrndq_m_f32): Likewise.
	(__arm_vrndxq_m_f32): Likewise.
	(__arm_vcmpeqq_m_n_f32): Likewise.
	(__arm_vcmpgeq_m_f32): Likewise.
	(__arm_vcmpgeq_m_n_f32): Likewise.
	(__arm_vcmpgtq_m_f32): Likewise.
	(__arm_vcmpgtq_m_n_f32): Likewise.
	(__arm_vcmpleq_m_f32): Likewise.
	(__arm_vcmpleq_m_n_f32): Likewise.
	(__arm_vcmpltq_m_f32): Likewise.
	(__arm_vcmpltq_m_n_f32): Likewise.
	(__arm_vcmpneq_m_f32): Likewise.
	(__arm_vcmpneq_m_n_f32): Likewise.
	(__arm_vcvtmq_m_u32_f32): Likewise.
	(__arm_vcvtnq_m_u32_f32): Likewise.
	(__arm_vcvtpq_m_u32_f32): Likewise.
	(__arm_vcvtq_m_u32_f32): Likewise.
	(vcvtq_m): Define polymorphic variant.
	(vabsq_m): Likewise.
	(vcmlaq): Likewise.
	(vcmlaq_rot180): Likewise.
	(vcmlaq_rot270): Likewise.
	(vcmlaq_rot90): Likewise.
	(vcmpeqq_m_n): Likewise.
	(vcmpgeq_m_n): Likewise.
	(vrndxq_m): Likewise.
	(vrndq_m): Likewise.
	(vrndpq_m): Likewise.
	(vcmpgtq_m_n): Likewise.
	(vcmpgtq_m): Likewise.
	(vcmpleq_m): Likewise.
	(vcmpleq_m_n): Likewise.
	(vcmpltq_m_n): Likewise.
	(vcmpltq_m): Likewise.
	(vcmpneq_m): Likewise.
	(vcmpneq_m_n): Likewise.
	(vcvtbq_m): Likewise.
	(vcvttq_m): Likewise.
	(vcvtmq_m): Likewise.
	(vcvtnq_m): Likewise.
	(vcvtpq_m): Likewise.
	(vdupq_m_n): Likewise.
	(vfmaq_n): Likewise.
	(vfmaq): Likewise.
	(vfmasq_n): Likewise.
	(vfmsq): Likewise.
	(vmaxnmaq_m): Likewise.
	(vmaxnmavq_m): Likewise.
	(vmaxnmvq_m): Likewise.
	(vmaxnmavq_p): Likewise.
	(vmaxnmvq_p): Likewise.
	(vminnmaq_m): Likewise.
	(vminnmavq_p): Likewise.
	(vminnmvq_p): Likewise.
	(vrndnq_m): Likewise.
	(vrndaq_m): Likewise.
	(vrndmq_m): Likewise.
	(vrev64q_m): Likewise.
	(vrev32q_m): Likewise.
	(vpselq): Likewise.
	(vnegq_m): Likewise.
	(vcmpgeq_m): Likewise.
	(vshrntq_n): Likewise.
	(vrshrntq_n): Likewise.
	(vmovlbq_m): Likewise.
	(vmovnbq_m): Likewise.
	(vmovntq_m): Likewise.
	(vmvnq_m_n): Likewise.
	(vmvnq_m): Likewise.
	(vshrnbq_n): Likewise.
	(vrshrnbq_n): Likewise.
	(vqshruntq_n): Likewise.
	(vrev16q_m): Likewise.
	(vqshrunbq_n): Likewise.
	(vqshrntq_n): Likewise.
	(vqrshruntq_n): Likewise.
	(vqrshrntq_n): Likewise.
	(vqshrnbq_n): Likewise.
	(vqmovuntq_m): Likewise.
	(vqmovntq_m): Likewise.
	(vqmovnbq_m): Likewise.
	(vorrq_m_n): Likewise.
	(vmovltq_m): Likewise.
	(vqmovunbq_m): Likewise.
	(vaddlvaq_p): Likewise.
	(vmlaldavaq): Likewise.
	(vmlaldavaxq): Likewise.
	(vmlaldavq_p): Likewise.
	(vmlaldavxq_p): Likewise.
	(vmlsldavaq): Likewise.
	(vmlsldavaxq): Likewise.
	(vmlsldavq_p): Likewise.
	(vmlsldavxq_p): Likewise.
	(vrmlaldavhaxq): Likewise.
	(vrmlaldavhq_p): Likewise.
	(vrmlaldavhxq_p): Likewise.
	(vrmlsldavhaq): Likewise.
	(vrmlsldavhaxq): Likewise.
	(vrmlsldavhq_p): Likewise.
	(vrmlsldavhxq_p): Likewise.
	* config/arm/arm_mve_builtins.def (TERNOP_NONE_NONE_IMM_UNONE): Use
	builtin qualifier.
	(TERNOP_NONE_NONE_NONE_IMM): Likewise.
	(TERNOP_NONE_NONE_NONE_NONE): Likewise.
	(TERNOP_NONE_NONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_NONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_UNONE_IMM_UNONE): Likewise.
	(TERNOP_UNONE_UNONE_NONE_IMM): Likewise.
	(TERNOP_UNONE_UNONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_IMM): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_UNONE): Likewise.
	* config/arm/mve.md (MVE_constraint3): Define mode attribute iterator.
	(MVE_pred3): Likewise.
	(MVE_constraint1): Likewise.
	(MVE_pred1): Likewise.
	(VMLALDAVQ_P): Define iterator.
	(VQMOVNBQ_M): Likewise.
	(VMOVLTQ_M): Likewise.
	(VMOVNBQ_M): Likewise.
	(VRSHRNTQ_N): Likewise.
	(VORRQ_M_N): Likewise.
	(VREV32Q_M): Likewise.
	(VREV16Q_M): Likewise.
	(VQRSHRNTQ_N): Likewise.
	(VMOVNTQ_M): Likewise.
	(VMOVLBQ_M): Likewise.
	(VMLALDAVAQ): Likewise.
	(VQSHRNBQ_N): Likewise.
	(VSHRNBQ_N): Likewise.
	(VRSHRNBQ_N): Likewise.
	(VMLALDAVXQ_P): Likewise.
	(VQMOVNTQ_M): Likewise.
	(VMVNQ_M_N): Likewise.
	(VQSHRNTQ_N): Likewise.
	(VMLALDAVAXQ): Likewise.
	(VSHRNTQ_N): Likewise.
	(VCVTMQ_M): Likewise.
	(VCVTNQ_M): Likewise.
	(VCVTPQ_M): Likewise.
	(VCVTQ_M_N_FROM_F): Likewise.
	(VCVTQ_M_FROM_F): Likewise.
	(VRMLALDAVHQ_P): Likewise.
	(VADDLVAQ_P): Likewise.
	(mve_vrndq_m_f<mode>): Define RTL pattern.
	(mve_vabsq_m_f<mode>): Likewise.
	(mve_vaddlvaq_p_<supf>v4si): Likewise.
	(mve_vcmlaq_f<mode>): Likewise.
	(mve_vcmlaq_rot180_f<mode>): Likewise.
	(mve_vcmlaq_rot270_f<mode>): Likewise.
	(mve_vcmlaq_rot90_f<mode>): Likewise.
	(mve_vcmpeqq_m_n_f<mode>): Likewise.
	(mve_vcmpgeq_m_f<mode>): Likewise.
	(mve_vcmpgeq_m_n_f<mode>): Likewise.
	(mve_vcmpgtq_m_f<mode>): Likewise.
	(mve_vcmpgtq_m_n_f<mode>): Likewise.
	(mve_vcmpleq_m_f<mode>): Likewise.
	(mve_vcmpleq_m_n_f<mode>): Likewise.
	(mve_vcmpltq_m_f<mode>): Likewise.
	(mve_vcmpltq_m_n_f<mode>): Likewise.
	(mve_vcmpneq_m_f<mode>): Likewise.
	(mve_vcmpneq_m_n_f<mode>): Likewise.
	(mve_vcvtbq_m_f16_f32v8hf): Likewise.
	(mve_vcvtbq_m_f32_f16v4sf): Likewise.
	(mve_vcvttq_m_f16_f32v8hf): Likewise.
	(mve_vcvttq_m_f32_f16v4sf): Likewise.
	(mve_vdupq_m_n_f<mode>): Likewise.
	(mve_vfmaq_f<mode>): Likewise.
	(mve_vfmaq_n_f<mode>): Likewise.
	(mve_vfmasq_n_f<mode>): Likewise.
	(mve_vfmsq_f<mode>): Likewise.
	(mve_vmaxnmaq_m_f<mode>): Likewise.
	(mve_vmaxnmavq_p_f<mode>): Likewise.
	(mve_vmaxnmvq_p_f<mode>): Likewise.
	(mve_vminnmaq_m_f<mode>): Likewise.
	(mve_vminnmavq_p_f<mode>): Likewise.
	(mve_vminnmvq_p_f<mode>): Likewise.
	(mve_vmlaldavaq_<supf><mode>): Likewise.
	(mve_vmlaldavaxq_<supf><mode>): Likewise.
	(mve_vmlaldavq_p_<supf><mode>): Likewise.
	(mve_vmlaldavxq_p_<supf><mode>): Likewise.
	(mve_vmlsldavaq_s<mode>): Likewise.
	(mve_vmlsldavaxq_s<mode>): Likewise.
	(mve_vmlsldavq_p_s<mode>): Likewise.
	(mve_vmlsldavxq_p_s<mode>): Likewise.
	(mve_vmovlbq_m_<supf><mode>): Likewise.
	(mve_vmovltq_m_<supf><mode>): Likewise.
	(mve_vmovnbq_m_<supf><mode>): Likewise.
	(mve_vmovntq_m_<supf><mode>): Likewise.
	(mve_vmvnq_m_n_<supf><mode>): Likewise.
	(mve_vnegq_m_f<mode>): Likewise.
	(mve_vorrq_m_n_<supf><mode>): Likewise.
	(mve_vpselq_f<mode>): Likewise.
	(mve_vqmovnbq_m_<supf><mode>): Likewise.
	(mve_vqmovntq_m_<supf><mode>): Likewise.
	(mve_vqmovunbq_m_s<mode>): Likewise.
	(mve_vqmovuntq_m_s<mode>): Likewise.
	(mve_vqrshrntq_n_<supf><mode>): Likewise.
	(mve_vqrshruntq_n_s<mode>): Likewise.
	(mve_vqshrnbq_n_<supf><mode>): Likewise.
	(mve_vqshrntq_n_<supf><mode>): Likewise.
	(mve_vqshrunbq_n_s<mode>): Likewise.
	(mve_vqshruntq_n_s<mode>): Likewise.
	(mve_vrev32q_m_fv8hf): Likewise.
	(mve_vrev32q_m_<supf><mode>): Likewise.
	(mve_vrev64q_m_f<mode>): Likewise.
	(mve_vrmlaldavhaxq_sv4si): Likewise.
	(mve_vrmlaldavhxq_p_sv4si): Likewise.
	(mve_vrmlsldavhaxq_sv4si): Likewise.
	(mve_vrmlsldavhq_p_sv4si): Likewise.
	(mve_vrmlsldavhxq_p_sv4si): Likewise.
	(mve_vrndaq_m_f<mode>): Likewise.
	(mve_vrndmq_m_f<mode>): Likewise.
	(mve_vrndnq_m_f<mode>): Likewise.
	(mve_vrndpq_m_f<mode>): Likewise.
	(mve_vrndxq_m_f<mode>): Likewise.
	(mve_vrshrnbq_n_<supf><mode>): Likewise.
	(mve_vrshrntq_n_<supf><mode>): Likewise.
	(mve_vshrnbq_n_<supf><mode>): Likewise.
	(mve_vshrntq_n_<supf><mode>): Likewise.
	(mve_vcvtmq_m_<supf><mode>): Likewise.
	(mve_vcvtpq_m_<supf><mode>): Likewise.
	(mve_vcvtnq_m_<supf><mode>): Likewise.
	(mve_vcvtq_m_n_from_f_<supf><mode>): Likewise.
	(mve_vrev16q_m_<supf>v16qi): Likewise.
	(mve_vcvtq_m_from_f_<supf><mode>): Likewise.
	(mve_vrmlaldavhq_p_<supf>v4si): Likewise.
	(mve_vrmlsldavhaq_sv4si): Likewise.

2020-03-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vpselq_u8): Define macro.
	(vpselq_s8): Likewise.
	(vrev64q_m_u8): Likewise.
	(vqrdmlashq_n_u8): Likewise.
	(vqrdmlahq_n_u8): Likewise.
	(vqdmlahq_n_u8): Likewise.
	(vmvnq_m_u8): Likewise.
	(vmlasq_n_u8): Likewise.
	(vmlaq_n_u8): Likewise.
	(vmladavq_p_u8): Likewise.
	(vmladavaq_u8): Likewise.
	(vminvq_p_u8): Likewise.
	(vmaxvq_p_u8): Likewise.
	(vdupq_m_n_u8): Likewise.
	(vcmpneq_m_u8): Likewise.
	(vcmpneq_m_n_u8): Likewise.
	(vcmphiq_m_u8): Likewise.
	(vcmphiq_m_n_u8): Likewise.
	(vcmpeqq_m_u8): Likewise.
	(vcmpeqq_m_n_u8): Likewise.
	(vcmpcsq_m_u8): Likewise.
	(vcmpcsq_m_n_u8): Likewise.
	(vclzq_m_u8): Likewise.
	(vaddvaq_p_u8): Likewise.
	(vsriq_n_u8): Likewise.
	(vsliq_n_u8): Likewise.
	(vshlq_m_r_u8): Likewise.
	(vrshlq_m_n_u8): Likewise.
	(vqshlq_m_r_u8): Likewise.
	(vqrshlq_m_n_u8): Likewise.
	(vminavq_p_s8): Likewise.
	(vminaq_m_s8): Likewise.
	(vmaxavq_p_s8): Likewise.
	(vmaxaq_m_s8): Likewise.
	(vcmpneq_m_s8): Likewise.
	(vcmpneq_m_n_s8): Likewise.
	(vcmpltq_m_s8): Likewise.
	(vcmpltq_m_n_s8): Likewise.
	(vcmpleq_m_s8): Likewise.
	(vcmpleq_m_n_s8): Likewise.
	(vcmpgtq_m_s8): Likewise.
	(vcmpgtq_m_n_s8): Likewise.
	(vcmpgeq_m_s8): Likewise.
	(vcmpgeq_m_n_s8): Likewise.
	(vcmpeqq_m_s8): Likewise.
	(vcmpeqq_m_n_s8): Likewise.
	(vshlq_m_r_s8): Likewise.
	(vrshlq_m_n_s8): Likewise.
	(vrev64q_m_s8): Likewise.
	(vqshlq_m_r_s8): Likewise.
	(vqrshlq_m_n_s8): Likewise.
	(vqnegq_m_s8): Likewise.
	(vqabsq_m_s8): Likewise.
	(vnegq_m_s8): Likewise.
	(vmvnq_m_s8): Likewise.
	(vmlsdavxq_p_s8): Likewise.
	(vmlsdavq_p_s8): Likewise.
	(vmladavxq_p_s8): Likewise.
	(vmladavq_p_s8): Likewise.
	(vminvq_p_s8): Likewise.
	(vmaxvq_p_s8): Likewise.
	(vdupq_m_n_s8): Likewise.
	(vclzq_m_s8): Likewise.
	(vclsq_m_s8): Likewise.
	(vaddvaq_p_s8): Likewise.
	(vabsq_m_s8): Likewise.
	(vqrdmlsdhxq_s8): Likewise.
	(vqrdmlsdhq_s8): Likewise.
	(vqrdmlashq_n_s8): Likewise.
	(vqrdmlahq_n_s8): Likewise.
	(vqrdmladhxq_s8): Likewise.
	(vqrdmladhq_s8): Likewise.
	(vqdmlsdhxq_s8): Likewise.
	(vqdmlsdhq_s8): Likewise.
	(vqdmlahq_n_s8): Likewise.
	(vqdmladhxq_s8): Likewise.
	(vqdmladhq_s8): Likewise.
	(vmlsdavaxq_s8): Likewise.
	(vmlsdavaq_s8): Likewise.
	(vmlasq_n_s8): Likewise.
	(vmlaq_n_s8): Likewise.
	(vmladavaxq_s8): Likewise.
	(vmladavaq_s8): Likewise.
	(vsriq_n_s8): Likewise.
	(vsliq_n_s8): Likewise.
	(vpselq_u16): Likewise.
	(vpselq_s16): Likewise.
	(vrev64q_m_u16): Likewise.
	(vqrdmlashq_n_u16): Likewise.
	(vqrdmlahq_n_u16): Likewise.
	(vqdmlahq_n_u16): Likewise.
	(vmvnq_m_u16): Likewise.
	(vmlasq_n_u16): Likewise.
	(vmlaq_n_u16): Likewise.
	(vmladavq_p_u16): Likewise.
	(vmladavaq_u16): Likewise.
	(vminvq_p_u16): Likewise.
	(vmaxvq_p_u16): Likewise.
	(vdupq_m_n_u16): Likewise.
	(vcmpneq_m_u16): Likewise.
	(vcmpneq_m_n_u16): Likewise.
	(vcmphiq_m_u16): Likewise.
	(vcmphiq_m_n_u16): Likewise.
	(vcmpeqq_m_u16): Likewise.
	(vcmpeqq_m_n_u16): Likewise.
	(vcmpcsq_m_u16): Likewise.
	(vcmpcsq_m_n_u16): Likewise.
	(vclzq_m_u16): Likewise.
	(vaddvaq_p_u16): Likewise.
	(vsriq_n_u16): Likewise.
	(vsliq_n_u16): Likewise.
	(vshlq_m_r_u16): Likewise.
	(vrshlq_m_n_u16): Likewise.
	(vqshlq_m_r_u16): Likewise.
	(vqrshlq_m_n_u16): Likewise.
	(vminavq_p_s16): Likewise.
	(vminaq_m_s16): Likewise.
	(vmaxavq_p_s16): Likewise.
	(vmaxaq_m_s16): Likewise.
	(vcmpneq_m_s16): Likewise.
	(vcmpneq_m_n_s16): Likewise.
	(vcmpltq_m_s16): Likewise.
	(vcmpltq_m_n_s16): Likewise.
	(vcmpleq_m_s16): Likewise.
	(vcmpleq_m_n_s16): Likewise.
	(vcmpgtq_m_s16): Likewise.
	(vcmpgtq_m_n_s16): Likewise.
	(vcmpgeq_m_s16): Likewise.
	(vcmpgeq_m_n_s16): Likewise.
	(vcmpeqq_m_s16): Likewise.
	(vcmpeqq_m_n_s16): Likewise.
	(vshlq_m_r_s16): Likewise.
	(vrshlq_m_n_s16): Likewise.
	(vrev64q_m_s16): Likewise.
	(vqshlq_m_r_s16): Likewise.
	(vqrshlq_m_n_s16): Likewise.
	(vqnegq_m_s16): Likewise.
	(vqabsq_m_s16): Likewise.
	(vnegq_m_s16): Likewise.
	(vmvnq_m_s16): Likewise.
	(vmlsdavxq_p_s16): Likewise.
	(vmlsdavq_p_s16): Likewise.
	(vmladavxq_p_s16): Likewise.
	(vmladavq_p_s16): Likewise.
	(vminvq_p_s16): Likewise.
	(vmaxvq_p_s16): Likewise.
	(vdupq_m_n_s16): Likewise.
	(vclzq_m_s16): Likewise.
	(vclsq_m_s16): Likewise.
	(vaddvaq_p_s16): Likewise.
	(vabsq_m_s16): Likewise.
	(vqrdmlsdhxq_s16): Likewise.
	(vqrdmlsdhq_s16): Likewise.
	(vqrdmlashq_n_s16): Likewise.
	(vqrdmlahq_n_s16): Likewise.
	(vqrdmladhxq_s16): Likewise.
	(vqrdmladhq_s16): Likewise.
	(vqdmlsdhxq_s16): Likewise.
	(vqdmlsdhq_s16): Likewise.
	(vqdmlahq_n_s16): Likewise.
	(vqdmladhxq_s16): Likewise.
	(vqdmladhq_s16): Likewise.
	(vmlsdavaxq_s16): Likewise.
	(vmlsdavaq_s16): Likewise.
	(vmlasq_n_s16): Likewise.
	(vmlaq_n_s16): Likewise.
	(vmladavaxq_s16): Likewise.
	(vmladavaq_s16): Likewise.
	(vsriq_n_s16): Likewise.
	(vsliq_n_s16): Likewise.
	(vpselq_u32): Likewise.
	(vpselq_s32): Likewise.
	(vrev64q_m_u32): Likewise.
	(vqrdmlashq_n_u32): Likewise.
	(vqrdmlahq_n_u32): Likewise.
	(vqdmlahq_n_u32): Likewise.
	(vmvnq_m_u32): Likewise.
	(vmlasq_n_u32): Likewise.
	(vmlaq_n_u32): Likewise.
	(vmladavq_p_u32): Likewise.
	(vmladavaq_u32): Likewise.
	(vminvq_p_u32): Likewise.
	(vmaxvq_p_u32): Likewise.
	(vdupq_m_n_u32): Likewise.
	(vcmpneq_m_u32): Likewise.
	(vcmpneq_m_n_u32): Likewise.
	(vcmphiq_m_u32): Likewise.
	(vcmphiq_m_n_u32): Likewise.
	(vcmpeqq_m_u32): Likewise.
	(vcmpeqq_m_n_u32): Likewise.
	(vcmpcsq_m_u32): Likewise.
	(vcmpcsq_m_n_u32): Likewise.
	(vclzq_m_u32): Likewise.
	(vaddvaq_p_u32): Likewise.
	(vsriq_n_u32): Likewise.
	(vsliq_n_u32): Likewise.
	(vshlq_m_r_u32): Likewise.
	(vrshlq_m_n_u32): Likewise.
	(vqshlq_m_r_u32): Likewise.
	(vqrshlq_m_n_u32): Likewise.
	(vminavq_p_s32): Likewise.
	(vminaq_m_s32): Likewise.
	(vmaxavq_p_s32): Likewise.
	(vmaxaq_m_s32): Likewise.
	(vcmpneq_m_s32): Likewise.
	(vcmpneq_m_n_s32): Likewise.
	(vcmpltq_m_s32): Likewise.
	(vcmpltq_m_n_s32): Likewise.
	(vcmpleq_m_s32): Likewise.
	(vcmpleq_m_n_s32): Likewise.
	(vcmpgtq_m_s32): Likewise.
	(vcmpgtq_m_n_s32): Likewise.
	(vcmpgeq_m_s32): Likewise.
	(vcmpgeq_m_n_s32): Likewise.
	(vcmpeqq_m_s32): Likewise.
	(vcmpeqq_m_n_s32): Likewise.
	(vshlq_m_r_s32): Likewise.
	(vrshlq_m_n_s32): Likewise.
	(vrev64q_m_s32): Likewise.
	(vqshlq_m_r_s32): Likewise.
	(vqrshlq_m_n_s32): Likewise.
	(vqnegq_m_s32): Likewise.
	(vqabsq_m_s32): Likewise.
	(vnegq_m_s32): Likewise.
	(vmvnq_m_s32): Likewise.
	(vmlsdavxq_p_s32): Likewise.
	(vmlsdavq_p_s32): Likewise.
	(vmladavxq_p_s32): Likewise.
	(vmladavq_p_s32): Likewise.
	(vminvq_p_s32): Likewise.
	(vmaxvq_p_s32): Likewise.
	(vdupq_m_n_s32): Likewise.
	(vclzq_m_s32): Likewise.
	(vclsq_m_s32): Likewise.
	(vaddvaq_p_s32): Likewise.
	(vabsq_m_s32): Likewise.
	(vqrdmlsdhxq_s32): Likewise.
	(vqrdmlsdhq_s32): Likewise.
	(vqrdmlashq_n_s32): Likewise.
	(vqrdmlahq_n_s32): Likewise.
	(vqrdmladhxq_s32): Likewise.
	(vqrdmladhq_s32): Likewise.
	(vqdmlsdhxq_s32): Likewise.
	(vqdmlsdhq_s32): Likewise.
	(vqdmlahq_n_s32): Likewise.
	(vqdmladhxq_s32): Likewise.
	(vqdmladhq_s32): Likewise.
	(vmlsdavaxq_s32): Likewise.
	(vmlsdavaq_s32): Likewise.
	(vmlasq_n_s32): Likewise.
	(vmlaq_n_s32): Likewise.
	(vmladavaxq_s32): Likewise.
	(vmladavaq_s32): Likewise.
	(vsriq_n_s32): Likewise.
	(vsliq_n_s32): Likewise.
	(vpselq_u64): Likewise.
	(vpselq_s64): Likewise.
	(__arm_vpselq_u8): Define intrinsic.
	(__arm_vpselq_s8): Likewise.
	(__arm_vrev64q_m_u8): Likewise.
	(__arm_vqrdmlashq_n_u8): Likewise.
	(__arm_vqrdmlahq_n_u8): Likewise.
	(__arm_vqdmlahq_n_u8): Likewise.
	(__arm_vmvnq_m_u8): Likewise.
	(__arm_vmlasq_n_u8): Likewise.
	(__arm_vmlaq_n_u8): Likewise.
	(__arm_vmladavq_p_u8): Likewise.
	(__arm_vmladavaq_u8): Likewise.
	(__arm_vminvq_p_u8): Likewise.
	(__arm_vmaxvq_p_u8): Likewise.
	(__arm_vdupq_m_n_u8): Likewise.
	(__arm_vcmpneq_m_u8): Likewise.
	(__arm_vcmpneq_m_n_u8): Likewise.
	(__arm_vcmphiq_m_u8): Likewise.
	(__arm_vcmphiq_m_n_u8): Likewise.
	(__arm_vcmpeqq_m_u8): Likewise.
	(__arm_vcmpeqq_m_n_u8): Likewise.
	(__arm_vcmpcsq_m_u8): Likewise.
	(__arm_vcmpcsq_m_n_u8): Likewise.
	(__arm_vclzq_m_u8): Likewise.
	(__arm_vaddvaq_p_u8): Likewise.
	(__arm_vsriq_n_u8): Likewise.
	(__arm_vsliq_n_u8): Likewise.
	(__arm_vshlq_m_r_u8): Likewise.
	(__arm_vrshlq_m_n_u8): Likewise.
	(__arm_vqshlq_m_r_u8): Likewise.
	(__arm_vqrshlq_m_n_u8): Likewise.
	(__arm_vminavq_p_s8): Likewise.
	(__arm_vminaq_m_s8): Likewise.
	(__arm_vmaxavq_p_s8): Likewise.
	(__arm_vmaxaq_m_s8): Likewise.
	(__arm_vcmpneq_m_s8): Likewise.
	(__arm_vcmpneq_m_n_s8): Likewise.
	(__arm_vcmpltq_m_s8): Likewise.
	(__arm_vcmpltq_m_n_s8): Likewise.
	(__arm_vcmpleq_m_s8): Likewise.
	(__arm_vcmpleq_m_n_s8): Likewise.
	(__arm_vcmpgtq_m_s8): Likewise.
	(__arm_vcmpgtq_m_n_s8): Likewise.
	(__arm_vcmpgeq_m_s8): Likewise.
	(__arm_vcmpgeq_m_n_s8): Likewise.
	(__arm_vcmpeqq_m_s8): Likewise.
	(__arm_vcmpeqq_m_n_s8): Likewise.
	(__arm_vshlq_m_r_s8): Likewise.
	(__arm_vrshlq_m_n_s8): Likewise.
	(__arm_vrev64q_m_s8): Likewise.
	(__arm_vqshlq_m_r_s8): Likewise.
	(__arm_vqrshlq_m_n_s8): Likewise.
	(__arm_vqnegq_m_s8): Likewise.
	(__arm_vqabsq_m_s8): Likewise.
	(__arm_vnegq_m_s8): Likewise.
	(__arm_vmvnq_m_s8): Likewise.
	(__arm_vmlsdavxq_p_s8): Likewise.
	(__arm_vmlsdavq_p_s8): Likewise.
	(__arm_vmladavxq_p_s8): Likewise.
	(__arm_vmladavq_p_s8): Likewise.
	(__arm_vminvq_p_s8): Likewise.
	(__arm_vmaxvq_p_s8): Likewise.
	(__arm_vdupq_m_n_s8): Likewise.
	(__arm_vclzq_m_s8): Likewise.
	(__arm_vclsq_m_s8): Likewise.
	(__arm_vaddvaq_p_s8): Likewise.
	(__arm_vabsq_m_s8): Likewise.
	(__arm_vqrdmlsdhxq_s8): Likewise.
	(__arm_vqrdmlsdhq_s8): Likewise.
	(__arm_vqrdmlashq_n_s8): Likewise.
	(__arm_vqrdmlahq_n_s8): Likewise.
	(__arm_vqrdmladhxq_s8): Likewise.
	(__arm_vqrdmladhq_s8): Likewise.
	(__arm_vqdmlsdhxq_s8): Likewise.
	(__arm_vqdmlsdhq_s8): Likewise.
	(__arm_vqdmlahq_n_s8): Likewise.
	(__arm_vqdmladhxq_s8): Likewise.
	(__arm_vqdmladhq_s8): Likewise.
	(__arm_vmlsdavaxq_s8): Likewise.
	(__arm_vmlsdavaq_s8): Likewise.
	(__arm_vmlasq_n_s8): Likewise.
	(__arm_vmlaq_n_s8): Likewise.
	(__arm_vmladavaxq_s8): Likewise.
	(__arm_vmladavaq_s8): Likewise.
	(__arm_vsriq_n_s8): Likewise.
	(__arm_vsliq_n_s8): Likewise.
	(__arm_vpselq_u16): Likewise.
	(__arm_vpselq_s16): Likewise.
	(__arm_vrev64q_m_u16): Likewise.
	(__arm_vqrdmlashq_n_u16): Likewise.
	(__arm_vqrdmlahq_n_u16): Likewise.
	(__arm_vqdmlahq_n_u16): Likewise.
	(__arm_vmvnq_m_u16): Likewise.
	(__arm_vmlasq_n_u16): Likewise.
	(__arm_vmlaq_n_u16): Likewise.
	(__arm_vmladavq_p_u16): Likewise.
	(__arm_vmladavaq_u16): Likewise.
	(__arm_vminvq_p_u16): Likewise.
	(__arm_vmaxvq_p_u16): Likewise.
	(__arm_vdupq_m_n_u16): Likewise.
	(__arm_vcmpneq_m_u16): Likewise.
	(__arm_vcmpneq_m_n_u16): Likewise.
	(__arm_vcmphiq_m_u16): Likewise.
	(__arm_vcmphiq_m_n_u16): Likewise.
	(__arm_vcmpeqq_m_u16): Likewise.
	(__arm_vcmpeqq_m_n_u16): Likewise.
	(__arm_vcmpcsq_m_u16): Likewise.
	(__arm_vcmpcsq_m_n_u16): Likewise.
	(__arm_vclzq_m_u16): Likewise.
	(__arm_vaddvaq_p_u16): Likewise.
	(__arm_vsriq_n_u16): Likewise.
	(__arm_vsliq_n_u16): Likewise.
	(__arm_vshlq_m_r_u16): Likewise.
	(__arm_vrshlq_m_n_u16): Likewise.
	(__arm_vqshlq_m_r_u16): Likewise.
	(__arm_vqrshlq_m_n_u16): Likewise.
	(__arm_vminavq_p_s16): Likewise.
	(__arm_vminaq_m_s16): Likewise.
	(__arm_vmaxavq_p_s16): Likewise.
	(__arm_vmaxaq_m_s16): Likewise.
	(__arm_vcmpneq_m_s16): Likewise.
	(__arm_vcmpneq_m_n_s16): Likewise.
	(__arm_vcmpltq_m_s16): Likewise.
	(__arm_vcmpltq_m_n_s16): Likewise.
	(__arm_vcmpleq_m_s16): Likewise.
	(__arm_vcmpleq_m_n_s16): Likewise.
	(__arm_vcmpgtq_m_s16): Likewise.
	(__arm_vcmpgtq_m_n_s16): Likewise.
	(__arm_vcmpgeq_m_s16): Likewise.
	(__arm_vcmpgeq_m_n_s16): Likewise.
	(__arm_vcmpeqq_m_s16): Likewise.
	(__arm_vcmpeqq_m_n_s16): Likewise.
	(__arm_vshlq_m_r_s16): Likewise.
	(__arm_vrshlq_m_n_s16): Likewise.
	(__arm_vrev64q_m_s16): Likewise.
	(__arm_vqshlq_m_r_s16): Likewise.
	(__arm_vqrshlq_m_n_s16): Likewise.
	(__arm_vqnegq_m_s16): Likewise.
	(__arm_vqabsq_m_s16): Likewise.
	(__arm_vnegq_m_s16): Likewise.
	(__arm_vmvnq_m_s16): Likewise.
	(__arm_vmlsdavxq_p_s16): Likewise.
	(__arm_vmlsdavq_p_s16): Likewise.
	(__arm_vmladavxq_p_s16): Likewise.
	(__arm_vmladavq_p_s16): Likewise.
	(__arm_vminvq_p_s16): Likewise.
	(__arm_vmaxvq_p_s16): Likewise.
	(__arm_vdupq_m_n_s16): Likewise.
	(__arm_vclzq_m_s16): Likewise.
	(__arm_vclsq_m_s16): Likewise.
	(__arm_vaddvaq_p_s16): Likewise.
	(__arm_vabsq_m_s16): Likewise.
	(__arm_vqrdmlsdhxq_s16): Likewise.
	(__arm_vqrdmlsdhq_s16): Likewise.
	(__arm_vqrdmlashq_n_s16): Likewise.
	(__arm_vqrdmlahq_n_s16): Likewise.
	(__arm_vqrdmladhxq_s16): Likewise.
	(__arm_vqrdmladhq_s16): Likewise.
	(__arm_vqdmlsdhxq_s16): Likewise.
	(__arm_vqdmlsdhq_s16): Likewise.
	(__arm_vqdmlahq_n_s16): Likewise.
	(__arm_vqdmladhxq_s16): Likewise.
	(__arm_vqdmladhq_s16): Likewise.
	(__arm_vmlsdavaxq_s16): Likewise.
	(__arm_vmlsdavaq_s16): Likewise.
	(__arm_vmlasq_n_s16): Likewise.
	(__arm_vmlaq_n_s16): Likewise.
	(__arm_vmladavaxq_s16): Likewise.
	(__arm_vmladavaq_s16): Likewise.
	(__arm_vsriq_n_s16): Likewise.
	(__arm_vsliq_n_s16): Likewise.
	(__arm_vpselq_u32): Likewise.
	(__arm_vpselq_s32): Likewise.
	(__arm_vrev64q_m_u32): Likewise.
	(__arm_vqrdmlashq_n_u32): Likewise.
	(__arm_vqrdmlahq_n_u32): Likewise.
	(__arm_vqdmlahq_n_u32): Likewise.
	(__arm_vmvnq_m_u32): Likewise.
	(__arm_vmlasq_n_u32): Likewise.
	(__arm_vmlaq_n_u32): Likewise.
	(__arm_vmladavq_p_u32): Likewise.
	(__arm_vmladavaq_u32): Likewise.
	(__arm_vminvq_p_u32): Likewise.
	(__arm_vmaxvq_p_u32): Likewise.
	(__arm_vdupq_m_n_u32): Likewise.
	(__arm_vcmpneq_m_u32): Likewise.
	(__arm_vcmpneq_m_n_u32): Likewise.
	(__arm_vcmphiq_m_u32): Likewise.
	(__arm_vcmphiq_m_n_u32): Likewise.
	(__arm_vcmpeqq_m_u32): Likewise.
	(__arm_vcmpeqq_m_n_u32): Likewise.
	(__arm_vcmpcsq_m_u32): Likewise.
	(__arm_vcmpcsq_m_n_u32): Likewise.
	(__arm_vclzq_m_u32): Likewise.
	(__arm_vaddvaq_p_u32): Likewise.
	(__arm_vsriq_n_u32): Likewise.
	(__arm_vsliq_n_u32): Likewise.
	(__arm_vshlq_m_r_u32): Likewise.
	(__arm_vrshlq_m_n_u32): Likewise.
	(__arm_vqshlq_m_r_u32): Likewise.
	(__arm_vqrshlq_m_n_u32): Likewise.
	(__arm_vminavq_p_s32): Likewise.
	(__arm_vminaq_m_s32): Likewise.
	(__arm_vmaxavq_p_s32): Likewise.
	(__arm_vmaxaq_m_s32): Likewise.
	(__arm_vcmpneq_m_s32): Likewise.
	(__arm_vcmpneq_m_n_s32): Likewise.
	(__arm_vcmpltq_m_s32): Likewise.
	(__arm_vcmpltq_m_n_s32): Likewise.
	(__arm_vcmpleq_m_s32): Likewise.
	(__arm_vcmpleq_m_n_s32): Likewise.
	(__arm_vcmpgtq_m_s32): Likewise.
	(__arm_vcmpgtq_m_n_s32): Likewise.
	(__arm_vcmpgeq_m_s32): Likewise.
	(__arm_vcmpgeq_m_n_s32): Likewise.
	(__arm_vcmpeqq_m_s32): Likewise.
	(__arm_vcmpeqq_m_n_s32): Likewise.
	(__arm_vshlq_m_r_s32): Likewise.
	(__arm_vrshlq_m_n_s32): Likewise.
	(__arm_vrev64q_m_s32): Likewise.
	(__arm_vqshlq_m_r_s32): Likewise.
	(__arm_vqrshlq_m_n_s32): Likewise.
	(__arm_vqnegq_m_s32): Likewise.
	(__arm_vqabsq_m_s32): Likewise.
	(__arm_vnegq_m_s32): Likewise.
	(__arm_vmvnq_m_s32): Likewise.
	(__arm_vmlsdavxq_p_s32): Likewise.
	(__arm_vmlsdavq_p_s32): Likewise.
	(__arm_vmladavxq_p_s32): Likewise.
	(__arm_vmladavq_p_s32): Likewise.
	(__arm_vminvq_p_s32): Likewise.
	(__arm_vmaxvq_p_s32): Likewise.
	(__arm_vdupq_m_n_s32): Likewise.
	(__arm_vclzq_m_s32): Likewise.
	(__arm_vclsq_m_s32): Likewise.
	(__arm_vaddvaq_p_s32): Likewise.
	(__arm_vabsq_m_s32): Likewise.
	(__arm_vqrdmlsdhxq_s32): Likewise.
	(__arm_vqrdmlsdhq_s32): Likewise.
	(__arm_vqrdmlashq_n_s32): Likewise.
	(__arm_vqrdmlahq_n_s32): Likewise.
	(__arm_vqrdmladhxq_s32): Likewise.
	(__arm_vqrdmladhq_s32): Likewise.
	(__arm_vqdmlsdhxq_s32): Likewise.
	(__arm_vqdmlsdhq_s32): Likewise.
	(__arm_vqdmlahq_n_s32): Likewise.
	(__arm_vqdmladhxq_s32): Likewise.
	(__arm_vqdmladhq_s32): Likewise.
	(__arm_vmlsdavaxq_s32): Likewise.
	(__arm_vmlsdavaq_s32): Likewise.
	(__arm_vmlasq_n_s32): Likewise.
	(__arm_vmlaq_n_s32): Likewise.
	(__arm_vmladavaxq_s32): Likewise.
	(__arm_vmladavaq_s32): Likewise.
	(__arm_vsriq_n_s32): Likewise.
	(__arm_vsliq_n_s32): Likewise.
	(__arm_vpselq_u64): Likewise.
	(__arm_vpselq_s64): Likewise.
	(vcmpneq_m_n): Define polymorphic variant.
	(vcmpneq_m): Likewise.
	(vqrdmlsdhq): Likewise.
	(vqrdmlsdhxq): Likewise.
	(vqrshlq_m_n): Likewise.
	(vqshlq_m_r): Likewise.
	(vrev64q_m): Likewise.
	(vrshlq_m_n): Likewise.
	(vshlq_m_r): Likewise.
	(vsliq_n): Likewise.
	(vsriq_n): Likewise.
	(vqrdmlashq_n): Likewise.
	(vqrdmlahq): Likewise.
	(vqrdmladhxq): Likewise.
	(vqrdmladhq): Likewise.
	(vqnegq_m): Likewise.
	(vqdmlsdhxq): Likewise.
	(vabsq_m): Likewise.
	(vclsq_m): Likewise.
	(vclzq_m): Likewise.
	(vcmpgeq_m): Likewise.
	(vcmpgeq_m_n): Likewise.
	(vdupq_m_n): Likewise.
	(vmaxaq_m): Likewise.
	(vmlaq_n): Likewise.
	(vmlasq_n): Likewise.
	(vmvnq_m): Likewise.
	(vnegq_m): Likewise.
	(vpselq): Likewise.
	(vqdmlahq_n): Likewise.
	(vqrdmlahq_n): Likewise.
	(vqdmlsdhq): Likewise.
	(vqdmladhq): Likewise.
	(vqabsq_m): Likewise.
	(vminaq_m): Likewise.
	(vrmlaldavhaq): Likewise.
	(vmlsdavxq_p): Likewise.
	(vmlsdavq_p): Likewise.	
	(vmlsdavaxq): Likewise.	
	(vmlsdavaq): Likewise.	
	(vaddvaq_p): Likewise.	
	(vcmpcsq_m_n): Likewise.	
	(vcmpcsq_m): Likewise.	
	(vcmpeqq_m_n): Likewise.	
	(vcmpeqq_m): Likewise.	
	(vmladavxq_p): Likewise.	
	(vmladavq_p): Likewise.	
	(vmladavaxq): Likewise.	
	(vmladavaq): Likewise.	
	(vminvq_p): Likewise.	
	(vminavq_p): Likewise.	
	(vmaxvq_p): Likewise.	
	(vmaxavq_p): Likewise.	
	(vcmpltq_m_n): Likewise.	
	(vcmpltq_m): Likewise.	
	(vcmpleq_m): Likewise.	
	(vcmpleq_m_n): Likewise.	
	(vcmphiq_m_n): Likewise.	
	(vcmphiq_m): Likewise.	
	(vcmpgtq_m_n): Likewise.	
	(vcmpgtq_m): Likewise.	
	* config/arm/arm_mve_builtins.def (TERNOP_NONE_NONE_NONE_IMM): Use
	builtin qualifier.
	(TERNOP_NONE_NONE_NONE_NONE): Likewise.
	(TERNOP_NONE_NONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_NONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_UNONE_NONE_UNONE): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_IMM): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_UNONE): Likewise.
	* config/arm/constraints.md (Rc): Define constraint to check constant is
	in the range of 0 to 15.
	(Re): Define constraint to check constant is in the range of 0 to 31.
	* config/arm/mve.md (VADDVAQ_P): Define iterator.
	(VCLZQ_M): Likewise.
	(VCMPEQQ_M_N): Likewise.
	(VCMPEQQ_M): Likewise.
	(VCMPNEQ_M_N): Likewise.
	(VCMPNEQ_M): Likewise.
	(VDUPQ_M_N): Likewise.
	(VMAXVQ_P): Likewise.
	(VMINVQ_P): Likewise.
	(VMLADAVAQ): Likewise.
	(VMLADAVQ_P): Likewise.
	(VMLAQ_N): Likewise.
	(VMLASQ_N): Likewise.
	(VMVNQ_M): Likewise.
	(VPSELQ): Likewise.
	(VQDMLAHQ_N): Likewise.
	(VQRDMLAHQ_N): Likewise.
	(VQRDMLASHQ_N): Likewise.
	(VQRSHLQ_M_N): Likewise.
	(VQSHLQ_M_R): Likewise.
	(VREV64Q_M): Likewise.
	(VRSHLQ_M_N): Likewise.
	(VSHLQ_M_R): Likewise.
	(VSLIQ_N): Likewise.
	(VSRIQ_N): Likewise.
	(mve_vabsq_m_s<mode>): Define RTL pattern.
	(mve_vaddvaq_p_<supf><mode>): Likewise.
	(mve_vclsq_m_s<mode>): Likewise.
	(mve_vclzq_m_<supf><mode>): Likewise.
	(mve_vcmpcsq_m_n_u<mode>): Likewise.
	(mve_vcmpcsq_m_u<mode>): Likewise.
	(mve_vcmpeqq_m_n_<supf><mode>): Likewise.
	(mve_vcmpeqq_m_<supf><mode>): Likewise.
	(mve_vcmpgeq_m_n_s<mode>): Likewise.
	(mve_vcmpgeq_m_s<mode>): Likewise.
	(mve_vcmpgtq_m_n_s<mode>): Likewise.
	(mve_vcmpgtq_m_s<mode>): Likewise.
	(mve_vcmphiq_m_n_u<mode>): Likewise.
	(mve_vcmphiq_m_u<mode>): Likewise.
	(mve_vcmpleq_m_n_s<mode>): Likewise.
	(mve_vcmpleq_m_s<mode>): Likewise.
	(mve_vcmpltq_m_n_s<mode>): Likewise.
	(mve_vcmpltq_m_s<mode>): Likewise.
	(mve_vcmpneq_m_n_<supf><mode>): Likewise.
	(mve_vcmpneq_m_<supf><mode>): Likewise.
	(mve_vdupq_m_n_<supf><mode>): Likewise.
	(mve_vmaxaq_m_s<mode>): Likewise.
	(mve_vmaxavq_p_s<mode>): Likewise.
	(mve_vmaxvq_p_<supf><mode>): Likewise.
	(mve_vminaq_m_s<mode>): Likewise.
	(mve_vminavq_p_s<mode>): Likewise.
	(mve_vminvq_p_<supf><mode>): Likewise.
	(mve_vmladavaq_<supf><mode>): Likewise.
	(mve_vmladavq_p_<supf><mode>): Likewise.
	(mve_vmladavxq_p_s<mode>): Likewise.
	(mve_vmlaq_n_<supf><mode>): Likewise.
	(mve_vmlasq_n_<supf><mode>): Likewise.
	(mve_vmlsdavq_p_s<mode>): Likewise.
	(mve_vmlsdavxq_p_s<mode>): Likewise.
	(mve_vmvnq_m_<supf><mode>): Likewise.
	(mve_vnegq_m_s<mode>): Likewise.
	(mve_vpselq_<supf><mode>): Likewise.
	(mve_vqabsq_m_s<mode>): Likewise.
	(mve_vqdmlahq_n_<supf><mode>): Likewise.
	(mve_vqnegq_m_s<mode>): Likewise.
	(mve_vqrdmladhq_s<mode>): Likewise.
	(mve_vqrdmladhxq_s<mode>): Likewise.
	(mve_vqrdmlahq_n_<supf><mode>): Likewise.
	(mve_vqrdmlashq_n_<supf><mode>): Likewise.
	(mve_vqrdmlsdhq_s<mode>): Likewise.
	(mve_vqrdmlsdhxq_s<mode>): Likewise.
	(mve_vqrshlq_m_n_<supf><mode>): Likewise.
	(mve_vqshlq_m_r_<supf><mode>): Likewise.
	(mve_vrev64q_m_<supf><mode>): Likewise.
	(mve_vrshlq_m_n_<supf><mode>): Likewise.
	(mve_vshlq_m_r_<supf><mode>): Likewise.
	(mve_vsliq_n_<supf><mode>): Likewise.
	(mve_vsriq_n_<supf><mode>): Likewise.
	(mve_vqdmlsdhxq_s<mode>): Likewise.
	(mve_vqdmlsdhq_s<mode>): Likewise.
	(mve_vqdmladhxq_s<mode>): Likewise.
	(mve_vqdmladhq_s<mode>): Likewise.
	(mve_vmlsdavaxq_s<mode>): Likewise.
	(mve_vmlsdavaq_s<mode>): Likewise.
	(mve_vmladavaxq_s<mode>): Likewise.
	* config/arm/predicates.md (mve_imm_15):Define predicate to check the
	matching constraint Rc.
	(mve_imm_31): Define predicate to check	the matching constraint Re.

2020-03-18  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (vec_cmp<mode>di): Set operand 1 to DImode.
	(vec_cmp<mode>di_dup): Likewise.
	* config/gcn/gcn.h (STORE_FLAG_VALUE): Set to -1.

2020-03-18  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (COND_MODE): Delete.
	(COND_INT_MODE): Delete.
	(cond_op): Add "mult".
	(cond_<expander><mode>): Use VEC_ALLREG_MODE.
	(cond_<expander><mode>): Use VEC_ALLREG_INT_MODE.

2020-03-18   Richard Biener  <rguenther@suse.de>

	PR middle-end/94206
	* gimple-fold.c (gimple_fold_builtin_memset): Avoid using
	partial int modes or not mode-precision integer types for
	the store.

2020-03-18  Jakub Jelinek  <jakub@redhat.com>

	* asan.c (get_mem_refs_of_builtin_call): Fix up duplicated word issue
	in a comment.
	* config/arc/arc.c (frame_stack_add): Likewise.
	* gimple-loop-versioning.cc (loop_versioning::analyze_arbitrary_term):
	Likewise.
	* ipa-predicate.c (predicate::remap_after_inlining): Likewise.
	* tree-ssa-strlen.h (handle_printf_call): Likewise.
	* tree-ssa-strlen.c (is_strlen_related_p): Likewise.
	* optinfo-emit-json.cc (optrecord_json_writer::add_record): Likewise.

2020-03-18  Duan bo  <duanbo3@huawei.com>

	PR target/94201
	* config/aarch64/aarch64.md (ldr_got_tiny): Delete.
	(@ldr_got_tiny_<mode>): New pattern.
	(ldr_got_tiny_sidi): Likewise.
	* config/aarch64/aarch64.c (aarch64_load_symref_appropriately): Use
	them to handle SYMBOL_TINY_GOT for ILP32.

2020-03-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_sve_abi): Treat p12-p15 as
	call-preserved for SVE PCS functions.
	(aarch64_layout_frame): Cope with up to 12 predicate save slots.
	Optimize the case in which there are no following vector save slots.

2020-03-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/94188
	* fold-const.c (build_fold_addr_expr): Convert address to
	correct type.
	* asan.c (maybe_create_ssa_name): Strip useless type conversions.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Use build1
	to build the ADDR_EXPR which we don't really want to simplify.
	* tree-ssa-dom.c (record_equivalences_from_stmt): Likewise.
	* tree-ssa-loop-im.c (gather_mem_refs_stmt): Likewise.
	* tree-ssa-forwprop.c (forward_propagate_addr_expr_1): Likewise.
	(simplify_builtin_call): Strip useless type conversions.
	* tree-ssa-strlen.c (new_strinfo): Likewise.

2020-03-17  Alexey Neyman  <stilor@att.net>

	PR debug/93751
	* dwarf2out.c (gen_decl_die): Proceed to generating the DIE if
	the debug level is terse and the declaration is public. Do not
	generate type info.
	(dwarf2out_decl): Same.
	(add_type_attribute): Return immediately if debug level is
	terse.

2020-03-17  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (Vmtype): Handle V4BF and V8BF.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (TERNOP_UNONE_UNONE_UNONE_IMM_QUALIFIERS):
	Define qualifier for ternary operands.
	(TERNOP_UNONE_UNONE_NONE_NONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_NONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_NONE_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vabavq_s8): Define macro.
	(vabavq_s16): Likewise.
	(vabavq_s32): Likewise.
	(vbicq_m_n_s16): Likewise.
	(vbicq_m_n_s32): Likewise.
	(vbicq_m_n_u16): Likewise.
	(vbicq_m_n_u32): Likewise.
	(vcmpeqq_m_f16): Likewise.
	(vcmpeqq_m_f32): Likewise.
	(vcvtaq_m_s16_f16): Likewise.
	(vcvtaq_m_u16_f16): Likewise.
	(vcvtaq_m_s32_f32): Likewise.
	(vcvtaq_m_u32_f32): Likewise.
	(vcvtq_m_f16_s16): Likewise.
	(vcvtq_m_f16_u16): Likewise.
	(vcvtq_m_f32_s32): Likewise.
	(vcvtq_m_f32_u32): Likewise.
	(vqrshrnbq_n_s16): Likewise.
	(vqrshrnbq_n_u16): Likewise.
	(vqrshrnbq_n_s32): Likewise.
	(vqrshrnbq_n_u32): Likewise.
	(vqrshrunbq_n_s16): Likewise.
	(vqrshrunbq_n_s32): Likewise.
	(vrmlaldavhaq_s32): Likewise.
	(vrmlaldavhaq_u32): Likewise.
	(vshlcq_s8): Likewise.
	(vshlcq_u8): Likewise.
	(vshlcq_s16): Likewise.
	(vshlcq_u16): Likewise.
	(vshlcq_s32): Likewise.
	(vshlcq_u32): Likewise.
	(vabavq_u8): Likewise.
	(vabavq_u16): Likewise.
	(vabavq_u32): Likewise.
	(__arm_vabavq_s8): Define intrinsic.
	(__arm_vabavq_s16): Likewise.
	(__arm_vabavq_s32): Likewise.
	(__arm_vabavq_u8): Likewise.
	(__arm_vabavq_u16): Likewise.
	(__arm_vabavq_u32): Likewise.
	(__arm_vbicq_m_n_s16): Likewise.
	(__arm_vbicq_m_n_s32): Likewise.
	(__arm_vbicq_m_n_u16): Likewise.
	(__arm_vbicq_m_n_u32): Likewise.
	(__arm_vqrshrnbq_n_s16): Likewise.
	(__arm_vqrshrnbq_n_u16): Likewise.
	(__arm_vqrshrnbq_n_s32): Likewise.
	(__arm_vqrshrnbq_n_u32): Likewise.
	(__arm_vqrshrunbq_n_s16): Likewise.
	(__arm_vqrshrunbq_n_s32): Likewise.
	(__arm_vrmlaldavhaq_s32): Likewise.
	(__arm_vrmlaldavhaq_u32): Likewise.
	(__arm_vshlcq_s8): Likewise.
	(__arm_vshlcq_u8): Likewise.
	(__arm_vshlcq_s16): Likewise.
	(__arm_vshlcq_u16): Likewise.
	(__arm_vshlcq_s32): Likewise.
	(__arm_vshlcq_u32): Likewise.
	(__arm_vcmpeqq_m_f16): Likewise.
	(__arm_vcmpeqq_m_f32): Likewise.
	(__arm_vcvtaq_m_s16_f16): Likewise.
	(__arm_vcvtaq_m_u16_f16): Likewise.
	(__arm_vcvtaq_m_s32_f32): Likewise.
	(__arm_vcvtaq_m_u32_f32): Likewise.
	(__arm_vcvtq_m_f16_s16): Likewise.
	(__arm_vcvtq_m_f16_u16): Likewise.
	(__arm_vcvtq_m_f32_s32): Likewise.
	(__arm_vcvtq_m_f32_u32): Likewise.
	(vcvtaq_m): Define polymorphic variant.
	(vcvtq_m): Likewise.
	(vabavq): Likewise.
	(vshlcq): Likewise.
	(vbicq_m_n): Likewise.
	(vqrshrnbq_n): Likewise.
	(vqrshrunbq_n): Likewise.
	* config/arm/arm_mve_builtins.def
	(TERNOP_UNONE_UNONE_UNONE_IMM_QUALIFIERS): Use the builtin qualifer.
	(TERNOP_UNONE_UNONE_NONE_NONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_NONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_IMM_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_IMM_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_IMM_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_UNONE_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(TERNOP_NONE_NONE_NONE_NONE_QUALIFIERS): Likewise.
	* config/arm/mve.md (VBICQ_M_N): Define iterator.
	(VCVTAQ_M): Likewise.
	(VCVTQ_M_TO_F): Likewise.
	(VQRSHRNBQ_N): Likewise.
	(VABAVQ): Likewise.
	(VSHLCQ): Likewise.
	(VRMLALDAVHAQ): Likewise.
	(mve_vbicq_m_n_<supf><mode>): Define RTL pattern.
	(mve_vcmpeqq_m_f<mode>): Likewise.
	(mve_vcvtaq_m_<supf><mode>): Likewise.
	(mve_vcvtq_m_to_f_<supf><mode>): Likewise.
	(mve_vqrshrnbq_n_<supf><mode>): Likewise.
	(mve_vqrshrunbq_n_s<mode>): Likewise.
	(mve_vrmlaldavhaq_<supf>v4si): Likewise.
	(mve_vabavq_<supf><mode>): Likewise.
	(mve_vshlcq_<supf><mode>): Likewise.
	(mve_vshlcq_<supf><mode>): Likewise.
	(mve_vshlcq_vec_<supf><mode>): Define RTL expand.
	(mve_vshlcq_carry_<supf><mode>): Likewise.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vqmovntq_u16): Define macro.
	(vqmovnbq_u16): Likewise.
	(vmulltq_poly_p8): Likewise.
	(vmullbq_poly_p8): Likewise.
	(vmovntq_u16): Likewise.
	(vmovnbq_u16): Likewise.
	(vmlaldavxq_u16): Likewise.
	(vmlaldavq_u16): Likewise.
	(vqmovuntq_s16): Likewise.
	(vqmovunbq_s16): Likewise.
	(vshlltq_n_u8): Likewise.
	(vshllbq_n_u8): Likewise.
	(vorrq_n_u16): Likewise.
	(vbicq_n_u16): Likewise.
	(vcmpneq_n_f16): Likewise.
	(vcmpneq_f16): Likewise.
	(vcmpltq_n_f16): Likewise.
	(vcmpltq_f16): Likewise.
	(vcmpleq_n_f16): Likewise.
	(vcmpleq_f16): Likewise.
	(vcmpgtq_n_f16): Likewise.
	(vcmpgtq_f16): Likewise.
	(vcmpgeq_n_f16): Likewise.
	(vcmpgeq_f16): Likewise.
	(vcmpeqq_n_f16): Likewise.
	(vcmpeqq_f16): Likewise.
	(vsubq_f16): Likewise.
	(vqmovntq_s16): Likewise.
	(vqmovnbq_s16): Likewise.
	(vqdmulltq_s16): Likewise.
	(vqdmulltq_n_s16): Likewise.
	(vqdmullbq_s16): Likewise.
	(vqdmullbq_n_s16): Likewise.
	(vorrq_f16): Likewise.
	(vornq_f16): Likewise.
	(vmulq_n_f16): Likewise.
	(vmulq_f16): Likewise.
	(vmovntq_s16): Likewise.
	(vmovnbq_s16): Likewise.
	(vmlsldavxq_s16): Likewise.
	(vmlsldavq_s16): Likewise.
	(vmlaldavxq_s16): Likewise.
	(vmlaldavq_s16): Likewise.
	(vminnmvq_f16): Likewise.
	(vminnmq_f16): Likewise.
	(vminnmavq_f16): Likewise.
	(vminnmaq_f16): Likewise.
	(vmaxnmvq_f16): Likewise.
	(vmaxnmq_f16): Likewise.
	(vmaxnmavq_f16): Likewise.
	(vmaxnmaq_f16): Likewise.
	(veorq_f16): Likewise.
	(vcmulq_rot90_f16): Likewise.
	(vcmulq_rot270_f16): Likewise.
	(vcmulq_rot180_f16): Likewise.
	(vcmulq_f16): Likewise.
	(vcaddq_rot90_f16): Likewise.
	(vcaddq_rot270_f16): Likewise.
	(vbicq_f16): Likewise.
	(vandq_f16): Likewise.
	(vaddq_n_f16): Likewise.
	(vabdq_f16): Likewise.
	(vshlltq_n_s8): Likewise.
	(vshllbq_n_s8): Likewise.
	(vorrq_n_s16): Likewise.
	(vbicq_n_s16): Likewise.
	(vqmovntq_u32): Likewise.
	(vqmovnbq_u32): Likewise.
	(vmulltq_poly_p16): Likewise.
	(vmullbq_poly_p16): Likewise.
	(vmovntq_u32): Likewise.
	(vmovnbq_u32): Likewise.
	(vmlaldavxq_u32): Likewise.
	(vmlaldavq_u32): Likewise.
	(vqmovuntq_s32): Likewise.
	(vqmovunbq_s32): Likewise.
	(vshlltq_n_u16): Likewise.
	(vshllbq_n_u16): Likewise.
	(vorrq_n_u32): Likewise.
	(vbicq_n_u32): Likewise.
	(vcmpneq_n_f32): Likewise.
	(vcmpneq_f32): Likewise.
	(vcmpltq_n_f32): Likewise.
	(vcmpltq_f32): Likewise.
	(vcmpleq_n_f32): Likewise.
	(vcmpleq_f32): Likewise.
	(vcmpgtq_n_f32): Likewise.
	(vcmpgtq_f32): Likewise.
	(vcmpgeq_n_f32): Likewise.
	(vcmpgeq_f32): Likewise.
	(vcmpeqq_n_f32): Likewise.
	(vcmpeqq_f32): Likewise.
	(vsubq_f32): Likewise.
	(vqmovntq_s32): Likewise.
	(vqmovnbq_s32): Likewise.
	(vqdmulltq_s32): Likewise.
	(vqdmulltq_n_s32): Likewise.
	(vqdmullbq_s32): Likewise.
	(vqdmullbq_n_s32): Likewise.
	(vorrq_f32): Likewise.
	(vornq_f32): Likewise.
	(vmulq_n_f32): Likewise.
	(vmulq_f32): Likewise.
	(vmovntq_s32): Likewise.
	(vmovnbq_s32): Likewise.
	(vmlsldavxq_s32): Likewise.
	(vmlsldavq_s32): Likewise.
	(vmlaldavxq_s32): Likewise.
	(vmlaldavq_s32): Likewise.
	(vminnmvq_f32): Likewise.
	(vminnmq_f32): Likewise.
	(vminnmavq_f32): Likewise.
	(vminnmaq_f32): Likewise.
	(vmaxnmvq_f32): Likewise.
	(vmaxnmq_f32): Likewise.
	(vmaxnmavq_f32): Likewise.
	(vmaxnmaq_f32): Likewise.
	(veorq_f32): Likewise.
	(vcmulq_rot90_f32): Likewise.
	(vcmulq_rot270_f32): Likewise.
	(vcmulq_rot180_f32): Likewise.
	(vcmulq_f32): Likewise.
	(vcaddq_rot90_f32): Likewise.
	(vcaddq_rot270_f32): Likewise.
	(vbicq_f32): Likewise.
	(vandq_f32): Likewise.
	(vaddq_n_f32): Likewise.
	(vabdq_f32): Likewise.
	(vshlltq_n_s16): Likewise.
	(vshllbq_n_s16): Likewise.
	(vorrq_n_s32): Likewise.
	(vbicq_n_s32): Likewise.
	(vrmlaldavhq_u32): Likewise.
	(vctp8q_m): Likewise.
	(vctp64q_m): Likewise.
	(vctp32q_m): Likewise.
	(vctp16q_m): Likewise.
	(vaddlvaq_u32): Likewise.
	(vrmlsldavhxq_s32): Likewise.
	(vrmlsldavhq_s32): Likewise.
	(vrmlaldavhxq_s32): Likewise.
	(vrmlaldavhq_s32): Likewise.
	(vcvttq_f16_f32): Likewise.
	(vcvtbq_f16_f32): Likewise.
	(vaddlvaq_s32): Likewise.
	(__arm_vqmovntq_u16): Define intrinsic.
	(__arm_vqmovnbq_u16): Likewise.
	(__arm_vmulltq_poly_p8): Likewise.
	(__arm_vmullbq_poly_p8): Likewise.
	(__arm_vmovntq_u16): Likewise.
	(__arm_vmovnbq_u16): Likewise.
	(__arm_vmlaldavxq_u16): Likewise.
	(__arm_vmlaldavq_u16): Likewise.
	(__arm_vqmovuntq_s16): Likewise.
	(__arm_vqmovunbq_s16): Likewise.
	(__arm_vshlltq_n_u8): Likewise.
	(__arm_vshllbq_n_u8): Likewise.
	(__arm_vorrq_n_u16): Likewise.
	(__arm_vbicq_n_u16): Likewise.
	(__arm_vcmpneq_n_f16): Likewise.
	(__arm_vcmpneq_f16): Likewise.
	(__arm_vcmpltq_n_f16): Likewise.
	(__arm_vcmpltq_f16): Likewise.
	(__arm_vcmpleq_n_f16): Likewise.
	(__arm_vcmpleq_f16): Likewise.
	(__arm_vcmpgtq_n_f16): Likewise.
	(__arm_vcmpgtq_f16): Likewise.
	(__arm_vcmpgeq_n_f16): Likewise.
	(__arm_vcmpgeq_f16): Likewise.
	(__arm_vcmpeqq_n_f16): Likewise.
	(__arm_vcmpeqq_f16): Likewise.
	(__arm_vsubq_f16): Likewise.
	(__arm_vqmovntq_s16): Likewise.
	(__arm_vqmovnbq_s16): Likewise.
	(__arm_vqdmulltq_s16): Likewise.
	(__arm_vqdmulltq_n_s16): Likewise.
	(__arm_vqdmullbq_s16): Likewise.
	(__arm_vqdmullbq_n_s16): Likewise.
	(__arm_vorrq_f16): Likewise.
	(__arm_vornq_f16): Likewise.
	(__arm_vmulq_n_f16): Likewise.
	(__arm_vmulq_f16): Likewise.
	(__arm_vmovntq_s16): Likewise.
	(__arm_vmovnbq_s16): Likewise.
	(__arm_vmlsldavxq_s16): Likewise.
	(__arm_vmlsldavq_s16): Likewise.
	(__arm_vmlaldavxq_s16): Likewise.
	(__arm_vmlaldavq_s16): Likewise.
	(__arm_vminnmvq_f16): Likewise.
	(__arm_vminnmq_f16): Likewise.
	(__arm_vminnmavq_f16): Likewise.
	(__arm_vminnmaq_f16): Likewise.
	(__arm_vmaxnmvq_f16): Likewise.
	(__arm_vmaxnmq_f16): Likewise.
	(__arm_vmaxnmavq_f16): Likewise.
	(__arm_vmaxnmaq_f16): Likewise.
	(__arm_veorq_f16): Likewise.
	(__arm_vcmulq_rot90_f16): Likewise.
	(__arm_vcmulq_rot270_f16): Likewise.
	(__arm_vcmulq_rot180_f16): Likewise.
	(__arm_vcmulq_f16): Likewise.
	(__arm_vcaddq_rot90_f16): Likewise.
	(__arm_vcaddq_rot270_f16): Likewise.
	(__arm_vbicq_f16): Likewise.
	(__arm_vandq_f16): Likewise.
	(__arm_vaddq_n_f16): Likewise.
	(__arm_vabdq_f16): Likewise.
	(__arm_vshlltq_n_s8): Likewise.
	(__arm_vshllbq_n_s8): Likewise.
	(__arm_vorrq_n_s16): Likewise.
	(__arm_vbicq_n_s16): Likewise.
	(__arm_vqmovntq_u32): Likewise.
	(__arm_vqmovnbq_u32): Likewise.
	(__arm_vmulltq_poly_p16): Likewise.
	(__arm_vmullbq_poly_p16): Likewise.
	(__arm_vmovntq_u32): Likewise.
	(__arm_vmovnbq_u32): Likewise.
	(__arm_vmlaldavxq_u32): Likewise.
	(__arm_vmlaldavq_u32): Likewise.
	(__arm_vqmovuntq_s32): Likewise.
	(__arm_vqmovunbq_s32): Likewise.
	(__arm_vshlltq_n_u16): Likewise.
	(__arm_vshllbq_n_u16): Likewise.
	(__arm_vorrq_n_u32): Likewise.
	(__arm_vbicq_n_u32): Likewise.
	(__arm_vcmpneq_n_f32): Likewise.
	(__arm_vcmpneq_f32): Likewise.
	(__arm_vcmpltq_n_f32): Likewise.
	(__arm_vcmpltq_f32): Likewise.
	(__arm_vcmpleq_n_f32): Likewise.
	(__arm_vcmpleq_f32): Likewise.
	(__arm_vcmpgtq_n_f32): Likewise.
	(__arm_vcmpgtq_f32): Likewise.
	(__arm_vcmpgeq_n_f32): Likewise.
	(__arm_vcmpgeq_f32): Likewise.
	(__arm_vcmpeqq_n_f32): Likewise.
	(__arm_vcmpeqq_f32): Likewise.
	(__arm_vsubq_f32): Likewise.
	(__arm_vqmovntq_s32): Likewise.
	(__arm_vqmovnbq_s32): Likewise.
	(__arm_vqdmulltq_s32): Likewise.
	(__arm_vqdmulltq_n_s32): Likewise.
	(__arm_vqdmullbq_s32): Likewise.
	(__arm_vqdmullbq_n_s32): Likewise.
	(__arm_vorrq_f32): Likewise.
	(__arm_vornq_f32): Likewise.
	(__arm_vmulq_n_f32): Likewise.
	(__arm_vmulq_f32): Likewise.
	(__arm_vmovntq_s32): Likewise.
	(__arm_vmovnbq_s32): Likewise.
	(__arm_vmlsldavxq_s32): Likewise.
	(__arm_vmlsldavq_s32): Likewise.
	(__arm_vmlaldavxq_s32): Likewise.
	(__arm_vmlaldavq_s32): Likewise.
	(__arm_vminnmvq_f32): Likewise.
	(__arm_vminnmq_f32): Likewise.
	(__arm_vminnmavq_f32): Likewise.
	(__arm_vminnmaq_f32): Likewise.
	(__arm_vmaxnmvq_f32): Likewise.
	(__arm_vmaxnmq_f32): Likewise.
	(__arm_vmaxnmavq_f32): Likewise.
	(__arm_vmaxnmaq_f32): Likewise.
	(__arm_veorq_f32): Likewise.
	(__arm_vcmulq_rot90_f32): Likewise.
	(__arm_vcmulq_rot270_f32): Likewise.
	(__arm_vcmulq_rot180_f32): Likewise.
	(__arm_vcmulq_f32): Likewise.
	(__arm_vcaddq_rot90_f32): Likewise.
	(__arm_vcaddq_rot270_f32): Likewise.
	(__arm_vbicq_f32): Likewise.
	(__arm_vandq_f32): Likewise.
	(__arm_vaddq_n_f32): Likewise.
	(__arm_vabdq_f32): Likewise.
	(__arm_vshlltq_n_s16): Likewise.
	(__arm_vshllbq_n_s16): Likewise.
	(__arm_vorrq_n_s32): Likewise.
	(__arm_vbicq_n_s32): Likewise.
	(__arm_vrmlaldavhq_u32): Likewise.
	(__arm_vctp8q_m): Likewise.
	(__arm_vctp64q_m): Likewise.
	(__arm_vctp32q_m): Likewise.
	(__arm_vctp16q_m): Likewise.
	(__arm_vaddlvaq_u32): Likewise.
	(__arm_vrmlsldavhxq_s32): Likewise.
	(__arm_vrmlsldavhq_s32): Likewise.
	(__arm_vrmlaldavhxq_s32): Likewise.
	(__arm_vrmlaldavhq_s32): Likewise.
	(__arm_vcvttq_f16_f32): Likewise.
	(__arm_vcvtbq_f16_f32): Likewise.
	(__arm_vaddlvaq_s32): Likewise.
	(vst4q): Define polymorphic variant.
	(vrndxq): Likewise.
	(vrndq): Likewise.
	(vrndpq): Likewise.
	(vrndnq): Likewise.
	(vrndmq): Likewise.
	(vrndaq): Likewise.
	(vrev64q): Likewise.
	(vnegq): Likewise.
	(vdupq_n): Likewise.
	(vabsq): Likewise.
	(vrev32q): Likewise.
	(vcvtbq_f32): Likewise.
	(vcvttq_f32): Likewise.
	(vcvtq): Likewise.
	(vsubq_n): Likewise.
	(vbrsrq_n): Likewise.
	(vcvtq_n): Likewise.
	(vsubq): Likewise.
	(vorrq): Likewise.
	(vabdq): Likewise.
	(vaddq_n): Likewise.
	(vandq): Likewise.
	(vbicq): Likewise.
	(vornq): Likewise.
	(vmulq_n): Likewise.
	(vmulq): Likewise.
	(vcaddq_rot270): Likewise.
	(vcmpeqq_n): Likewise.
	(vcmpeqq): Likewise.
	(vcaddq_rot90): Likewise.
	(vcmpgeq_n): Likewise.
	(vcmpgeq): Likewise.
	(vcmpgtq_n): Likewise.
	(vcmpgtq): Likewise.
	(vcmpgtq): Likewise.
	(vcmpleq_n): Likewise.
	(vcmpleq_n): Likewise.
	(vcmpleq): Likewise.
	(vcmpleq): Likewise.
	(vcmpltq_n): Likewise.
	(vcmpltq_n): Likewise.
	(vcmpltq): Likewise.
	(vcmpltq): Likewise.
	(vcmpneq_n): Likewise.
	(vcmpneq_n): Likewise.
	(vcmpneq): Likewise.
	(vcmpneq): Likewise.
	(vcmulq): Likewise.
	(vcmulq): Likewise.
	(vcmulq_rot180): Likewise.
	(vcmulq_rot180): Likewise.
	(vcmulq_rot270): Likewise.
	(vcmulq_rot270): Likewise.
	(vcmulq_rot90): Likewise.
	(vcmulq_rot90): Likewise.
	(veorq): Likewise.
	(veorq): Likewise.
	(vmaxnmaq): Likewise.
	(vmaxnmaq): Likewise.
	(vmaxnmavq): Likewise.
	(vmaxnmavq): Likewise.
	(vmaxnmq): Likewise.
	(vmaxnmq): Likewise.
	(vmaxnmvq): Likewise.
	(vmaxnmvq): Likewise.
	(vminnmaq): Likewise.
	(vminnmaq): Likewise.
	(vminnmavq): Likewise.
	(vminnmavq): Likewise.
	(vminnmq): Likewise.
	(vminnmq): Likewise.
	(vminnmvq): Likewise.
	(vminnmvq): Likewise.
	(vbicq_n): Likewise.
	(vqmovntq): Likewise.
	(vqmovntq): Likewise.
	(vqmovnbq): Likewise.
	(vqmovnbq): Likewise.
	(vmulltq_poly): Likewise.
	(vmulltq_poly): Likewise.
	(vmullbq_poly): Likewise.
	(vmullbq_poly): Likewise.
	(vmovntq): Likewise.
	(vmovntq): Likewise.
	(vmovnbq): Likewise.
	(vmovnbq): Likewise.
	(vmlaldavxq): Likewise.
	(vmlaldavxq): Likewise.
	(vqmovuntq): Likewise.
	(vqmovuntq): Likewise.
	(vshlltq_n): Likewise.
	(vshlltq_n): Likewise.
	(vshllbq_n): Likewise.
	(vshllbq_n): Likewise.
	(vorrq_n): Likewise.
	(vorrq_n): Likewise.
	(vmlaldavq): Likewise.
	(vmlaldavq): Likewise.
	(vqmovunbq): Likewise.
	(vqmovunbq): Likewise.
	(vqdmulltq_n): Likewise.
	(vqdmulltq_n): Likewise.
	(vqdmulltq): Likewise.
	(vqdmulltq): Likewise.
	(vqdmullbq_n): Likewise.
	(vqdmullbq_n): Likewise.
	(vqdmullbq): Likewise.
	(vqdmullbq): Likewise.
	(vaddlvaq): Likewise.
	(vaddlvaq): Likewise.
	(vrmlaldavhq): Likewise.
	(vrmlaldavhq): Likewise.
	(vrmlaldavhxq): Likewise.
	(vrmlaldavhxq): Likewise.
	(vrmlsldavhq): Likewise.
	(vrmlsldavhq): Likewise.
	(vrmlsldavhxq): Likewise.
	(vrmlsldavhxq): Likewise.
	(vmlsldavxq): Likewise.
	(vmlsldavxq): Likewise.
	(vmlsldavq): Likewise.
	(vmlsldavq): Likewise.
	* config/arm/arm_mve_builtins.def (BINOP_NONE_NONE_IMM): Use it.
	(BINOP_NONE_NONE_NONE): Likewise.
	(BINOP_UNONE_NONE_NONE): Likewise.
	(BINOP_UNONE_UNONE_IMM): Likewise.
	(BINOP_UNONE_UNONE_NONE): Likewise.
	(BINOP_UNONE_UNONE_UNONE): Likewise.
	* config/arm/mve.md (mve_vabdq_f<mode>): Define RTL pattern.
	(mve_vaddlvaq_<supf>v4si): Likewise.
	(mve_vaddq_n_f<mode>): Likewise.
	(mve_vandq_f<mode>): Likewise.
	(mve_vbicq_f<mode>): Likewise.
	(mve_vbicq_n_<supf><mode>): Likewise.
	(mve_vcaddq_rot270_f<mode>): Likewise.
	(mve_vcaddq_rot90_f<mode>): Likewise.
	(mve_vcmpeqq_f<mode>): Likewise.
	(mve_vcmpeqq_n_f<mode>): Likewise.
	(mve_vcmpgeq_f<mode>): Likewise.
	(mve_vcmpgeq_n_f<mode>): Likewise.
	(mve_vcmpgtq_f<mode>): Likewise.
	(mve_vcmpgtq_n_f<mode>): Likewise.
	(mve_vcmpleq_f<mode>): Likewise.
	(mve_vcmpleq_n_f<mode>): Likewise.
	(mve_vcmpltq_f<mode>): Likewise.
	(mve_vcmpltq_n_f<mode>): Likewise.
	(mve_vcmpneq_f<mode>): Likewise.
	(mve_vcmpneq_n_f<mode>): Likewise.
	(mve_vcmulq_f<mode>): Likewise.
	(mve_vcmulq_rot180_f<mode>): Likewise.
	(mve_vcmulq_rot270_f<mode>): Likewise.
	(mve_vcmulq_rot90_f<mode>): Likewise.
	(mve_vctp<mode1>q_mhi): Likewise.
	(mve_vcvtbq_f16_f32v8hf): Likewise.
	(mve_vcvttq_f16_f32v8hf): Likewise.
	(mve_veorq_f<mode>): Likewise.
	(mve_vmaxnmaq_f<mode>): Likewise.
	(mve_vmaxnmavq_f<mode>): Likewise.
	(mve_vmaxnmq_f<mode>): Likewise.
	(mve_vmaxnmvq_f<mode>): Likewise.
	(mve_vminnmaq_f<mode>): Likewise.
	(mve_vminnmavq_f<mode>): Likewise.
	(mve_vminnmq_f<mode>): Likewise.
	(mve_vminnmvq_f<mode>): Likewise.
	(mve_vmlaldavq_<supf><mode>): Likewise.
	(mve_vmlaldavxq_<supf><mode>): Likewise.
	(mve_vmlsldavq_s<mode>): Likewise.
	(mve_vmlsldavxq_s<mode>): Likewise.
	(mve_vmovnbq_<supf><mode>): Likewise.
	(mve_vmovntq_<supf><mode>): Likewise.
	(mve_vmulq_f<mode>): Likewise.
	(mve_vmulq_n_f<mode>): Likewise.
	(mve_vornq_f<mode>): Likewise.
	(mve_vorrq_f<mode>): Likewise.
	(mve_vorrq_n_<supf><mode>): Likewise.
	(mve_vqdmullbq_n_s<mode>): Likewise.
	(mve_vqdmullbq_s<mode>): Likewise.
	(mve_vqdmulltq_n_s<mode>): Likewise.
	(mve_vqdmulltq_s<mode>): Likewise.
	(mve_vqmovnbq_<supf><mode>): Likewise.
	(mve_vqmovntq_<supf><mode>): Likewise.
	(mve_vqmovunbq_s<mode>): Likewise.
	(mve_vqmovuntq_s<mode>): Likewise.
	(mve_vrmlaldavhxq_sv4si): Likewise.
	(mve_vrmlsldavhq_sv4si): Likewise.
	(mve_vrmlsldavhxq_sv4si): Likewise.
	(mve_vshllbq_n_<supf><mode>): Likewise.
	(mve_vshlltq_n_<supf><mode>): Likewise.
	(mve_vsubq_f<mode>): Likewise.
	(mve_vmulltq_poly_p<mode>): Likewise.
	(mve_vmullbq_poly_p<mode>): Likewise.
	(mve_vrmlaldavhq_<supf>v4si): Likewise.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm_mve.h (vsubq_u8): Define macro.
	(vsubq_n_u8): Likewise.
	(vrmulhq_u8): Likewise.
	(vrhaddq_u8): Likewise.
	(vqsubq_u8): Likewise.
	(vqsubq_n_u8): Likewise.
	(vqaddq_u8): Likewise.
	(vqaddq_n_u8): Likewise.
	(vorrq_u8): Likewise.
	(vornq_u8): Likewise.
	(vmulq_u8): Likewise.
	(vmulq_n_u8): Likewise.
	(vmulltq_int_u8): Likewise.
	(vmullbq_int_u8): Likewise.
	(vmulhq_u8): Likewise.
	(vmladavq_u8): Likewise.
	(vminvq_u8): Likewise.
	(vminq_u8): Likewise.
	(vmaxvq_u8): Likewise.
	(vmaxq_u8): Likewise.
	(vhsubq_u8): Likewise.
	(vhsubq_n_u8): Likewise.
	(vhaddq_u8): Likewise.
	(vhaddq_n_u8): Likewise.
	(veorq_u8): Likewise.
	(vcmpneq_n_u8): Likewise.
	(vcmphiq_u8): Likewise.
	(vcmphiq_n_u8): Likewise.
	(vcmpeqq_u8): Likewise.
	(vcmpeqq_n_u8): Likewise.
	(vcmpcsq_u8): Likewise.
	(vcmpcsq_n_u8): Likewise.
	(vcaddq_rot90_u8): Likewise.
	(vcaddq_rot270_u8): Likewise.
	(vbicq_u8): Likewise.
	(vandq_u8): Likewise.
	(vaddvq_p_u8): Likewise.
	(vaddvaq_u8): Likewise.
	(vaddq_n_u8): Likewise.
	(vabdq_u8): Likewise.
	(vshlq_r_u8): Likewise.
	(vrshlq_u8): Likewise.
	(vrshlq_n_u8): Likewise.
	(vqshlq_u8): Likewise.
	(vqshlq_r_u8): Likewise.
	(vqrshlq_u8): Likewise.
	(vqrshlq_n_u8): Likewise.
	(vminavq_s8): Likewise.
	(vminaq_s8): Likewise.
	(vmaxavq_s8): Likewise.
	(vmaxaq_s8): Likewise.
	(vbrsrq_n_u8): Likewise.
	(vshlq_n_u8): Likewise.
	(vrshrq_n_u8): Likewise.
	(vqshlq_n_u8): Likewise.
	(vcmpneq_n_s8): Likewise.
	(vcmpltq_s8): Likewise.
	(vcmpltq_n_s8): Likewise.
	(vcmpleq_s8): Likewise.
	(vcmpleq_n_s8): Likewise.
	(vcmpgtq_s8): Likewise.
	(vcmpgtq_n_s8): Likewise.
	(vcmpgeq_s8): Likewise.
	(vcmpgeq_n_s8): Likewise.
	(vcmpeqq_s8): Likewise.
	(vcmpeqq_n_s8): Likewise.
	(vqshluq_n_s8): Likewise.
	(vaddvq_p_s8): Likewise.
	(vsubq_s8): Likewise.
	(vsubq_n_s8): Likewise.
	(vshlq_r_s8): Likewise.
	(vrshlq_s8): Likewise.
	(vrshlq_n_s8): Likewise.
	(vrmulhq_s8): Likewise.
	(vrhaddq_s8): Likewise.
	(vqsubq_s8): Likewise.
	(vqsubq_n_s8): Likewise.
	(vqshlq_s8): Likewise.
	(vqshlq_r_s8): Likewise.
	(vqrshlq_s8): Likewise.
	(vqrshlq_n_s8): Likewise.
	(vqrdmulhq_s8): Likewise.
	(vqrdmulhq_n_s8): Likewise.
	(vqdmulhq_s8): Likewise.
	(vqdmulhq_n_s8): Likewise.
	(vqaddq_s8): Likewise.
	(vqaddq_n_s8): Likewise.
	(vorrq_s8): Likewise.
	(vornq_s8): Likewise.
	(vmulq_s8): Likewise.
	(vmulq_n_s8): Likewise.
	(vmulltq_int_s8): Likewise.
	(vmullbq_int_s8): Likewise.
	(vmulhq_s8): Likewise.
	(vmlsdavxq_s8): Likewise.
	(vmlsdavq_s8): Likewise.
	(vmladavxq_s8): Likewise.
	(vmladavq_s8): Likewise.
	(vminvq_s8): Likewise.
	(vminq_s8): Likewise.
	(vmaxvq_s8): Likewise.
	(vmaxq_s8): Likewise.
	(vhsubq_s8): Likewise.
	(vhsubq_n_s8): Likewise.
	(vhcaddq_rot90_s8): Likewise.
	(vhcaddq_rot270_s8): Likewise.
	(vhaddq_s8): Likewise.
	(vhaddq_n_s8): Likewise.
	(veorq_s8): Likewise.
	(vcaddq_rot90_s8): Likewise.
	(vcaddq_rot270_s8): Likewise.
	(vbrsrq_n_s8): Likewise.
	(vbicq_s8): Likewise.
	(vandq_s8): Likewise.
	(vaddvaq_s8): Likewise.
	(vaddq_n_s8): Likewise.
	(vabdq_s8): Likewise.
	(vshlq_n_s8): Likewise.
	(vrshrq_n_s8): Likewise.
	(vqshlq_n_s8): Likewise.
	(vsubq_u16): Likewise.
	(vsubq_n_u16): Likewise.
	(vrmulhq_u16): Likewise.
	(vrhaddq_u16): Likewise.
	(vqsubq_u16): Likewise.
	(vqsubq_n_u16): Likewise.
	(vqaddq_u16): Likewise.
	(vqaddq_n_u16): Likewise.
	(vorrq_u16): Likewise.
	(vornq_u16): Likewise.
	(vmulq_u16): Likewise.
	(vmulq_n_u16): Likewise.
	(vmulltq_int_u16): Likewise.
	(vmullbq_int_u16): Likewise.
	(vmulhq_u16): Likewise.
	(vmladavq_u16): Likewise.
	(vminvq_u16): Likewise.
	(vminq_u16): Likewise.
	(vmaxvq_u16): Likewise.
	(vmaxq_u16): Likewise.
	(vhsubq_u16): Likewise.
	(vhsubq_n_u16): Likewise.
	(vhaddq_u16): Likewise.
	(vhaddq_n_u16): Likewise.
	(veorq_u16): Likewise.
	(vcmpneq_n_u16): Likewise.
	(vcmphiq_u16): Likewise.
	(vcmphiq_n_u16): Likewise.
	(vcmpeqq_u16): Likewise.
	(vcmpeqq_n_u16): Likewise.
	(vcmpcsq_u16): Likewise.
	(vcmpcsq_n_u16): Likewise.
	(vcaddq_rot90_u16): Likewise.
	(vcaddq_rot270_u16): Likewise.
	(vbicq_u16): Likewise.
	(vandq_u16): Likewise.
	(vaddvq_p_u16): Likewise.
	(vaddvaq_u16): Likewise.
	(vaddq_n_u16): Likewise.
	(vabdq_u16): Likewise.
	(vshlq_r_u16): Likewise.
	(vrshlq_u16): Likewise.
	(vrshlq_n_u16): Likewise.
	(vqshlq_u16): Likewise.
	(vqshlq_r_u16): Likewise.
	(vqrshlq_u16): Likewise.
	(vqrshlq_n_u16): Likewise.
	(vminavq_s16): Likewise.
	(vminaq_s16): Likewise.
	(vmaxavq_s16): Likewise.
	(vmaxaq_s16): Likewise.
	(vbrsrq_n_u16): Likewise.
	(vshlq_n_u16): Likewise.
	(vrshrq_n_u16): Likewise.
	(vqshlq_n_u16): Likewise.
	(vcmpneq_n_s16): Likewise.
	(vcmpltq_s16): Likewise.
	(vcmpltq_n_s16): Likewise.
	(vcmpleq_s16): Likewise.
	(vcmpleq_n_s16): Likewise.
	(vcmpgtq_s16): Likewise.
	(vcmpgtq_n_s16): Likewise.
	(vcmpgeq_s16): Likewise.
	(vcmpgeq_n_s16): Likewise.
	(vcmpeqq_s16): Likewise.
	(vcmpeqq_n_s16): Likewise.
	(vqshluq_n_s16): Likewise.
	(vaddvq_p_s16): Likewise.
	(vsubq_s16): Likewise.
	(vsubq_n_s16): Likewise.
	(vshlq_r_s16): Likewise.
	(vrshlq_s16): Likewise.
	(vrshlq_n_s16): Likewise.
	(vrmulhq_s16): Likewise.
	(vrhaddq_s16): Likewise.
	(vqsubq_s16): Likewise.
	(vqsubq_n_s16): Likewise.
	(vqshlq_s16): Likewise.
	(vqshlq_r_s16): Likewise.
	(vqrshlq_s16): Likewise.
	(vqrshlq_n_s16): Likewise.
	(vqrdmulhq_s16): Likewise.
	(vqrdmulhq_n_s16): Likewise.
	(vqdmulhq_s16): Likewise.
	(vqdmulhq_n_s16): Likewise.
	(vqaddq_s16): Likewise.
	(vqaddq_n_s16): Likewise.
	(vorrq_s16): Likewise.
	(vornq_s16): Likewise.
	(vmulq_s16): Likewise.
	(vmulq_n_s16): Likewise.
	(vmulltq_int_s16): Likewise.
	(vmullbq_int_s16): Likewise.
	(vmulhq_s16): Likewise.
	(vmlsdavxq_s16): Likewise.
	(vmlsdavq_s16): Likewise.
	(vmladavxq_s16): Likewise.
	(vmladavq_s16): Likewise.
	(vminvq_s16): Likewise.
	(vminq_s16): Likewise.
	(vmaxvq_s16): Likewise.
	(vmaxq_s16): Likewise.
	(vhsubq_s16): Likewise.
	(vhsubq_n_s16): Likewise.
	(vhcaddq_rot90_s16): Likewise.
	(vhcaddq_rot270_s16): Likewise.
	(vhaddq_s16): Likewise.
	(vhaddq_n_s16): Likewise.
	(veorq_s16): Likewise.
	(vcaddq_rot90_s16): Likewise.
	(vcaddq_rot270_s16): Likewise.
	(vbrsrq_n_s16): Likewise.
	(vbicq_s16): Likewise.
	(vandq_s16): Likewise.
	(vaddvaq_s16): Likewise.
	(vaddq_n_s16): Likewise.
	(vabdq_s16): Likewise.
	(vshlq_n_s16): Likewise.
	(vrshrq_n_s16): Likewise.
	(vqshlq_n_s16): Likewise.
	(vsubq_u32): Likewise.
	(vsubq_n_u32): Likewise.
	(vrmulhq_u32): Likewise.
	(vrhaddq_u32): Likewise.
	(vqsubq_u32): Likewise.
	(vqsubq_n_u32): Likewise.
	(vqaddq_u32): Likewise.
	(vqaddq_n_u32): Likewise.
	(vorrq_u32): Likewise.
	(vornq_u32): Likewise.
	(vmulq_u32): Likewise.
	(vmulq_n_u32): Likewise.
	(vmulltq_int_u32): Likewise.
	(vmullbq_int_u32): Likewise.
	(vmulhq_u32): Likewise.
	(vmladavq_u32): Likewise.
	(vminvq_u32): Likewise.
	(vminq_u32): Likewise.
	(vmaxvq_u32): Likewise.
	(vmaxq_u32): Likewise.
	(vhsubq_u32): Likewise.
	(vhsubq_n_u32): Likewise.
	(vhaddq_u32): Likewise.
	(vhaddq_n_u32): Likewise.
	(veorq_u32): Likewise.
	(vcmpneq_n_u32): Likewise.
	(vcmphiq_u32): Likewise.
	(vcmphiq_n_u32): Likewise.
	(vcmpeqq_u32): Likewise.
	(vcmpeqq_n_u32): Likewise.
	(vcmpcsq_u32): Likewise.
	(vcmpcsq_n_u32): Likewise.
	(vcaddq_rot90_u32): Likewise.
	(vcaddq_rot270_u32): Likewise.
	(vbicq_u32): Likewise.
	(vandq_u32): Likewise.
	(vaddvq_p_u32): Likewise.
	(vaddvaq_u32): Likewise.
	(vaddq_n_u32): Likewise.
	(vabdq_u32): Likewise.
	(vshlq_r_u32): Likewise.
	(vrshlq_u32): Likewise.
	(vrshlq_n_u32): Likewise.
	(vqshlq_u32): Likewise.
	(vqshlq_r_u32): Likewise.
	(vqrshlq_u32): Likewise.
	(vqrshlq_n_u32): Likewise.
	(vminavq_s32): Likewise.
	(vminaq_s32): Likewise.
	(vmaxavq_s32): Likewise.
	(vmaxaq_s32): Likewise.
	(vbrsrq_n_u32): Likewise.
	(vshlq_n_u32): Likewise.
	(vrshrq_n_u32): Likewise.
	(vqshlq_n_u32): Likewise.
	(vcmpneq_n_s32): Likewise.
	(vcmpltq_s32): Likewise.
	(vcmpltq_n_s32): Likewise.
	(vcmpleq_s32): Likewise.
	(vcmpleq_n_s32): Likewise.
	(vcmpgtq_s32): Likewise.
	(vcmpgtq_n_s32): Likewise.
	(vcmpgeq_s32): Likewise.
	(vcmpgeq_n_s32): Likewise.
	(vcmpeqq_s32): Likewise.
	(vcmpeqq_n_s32): Likewise.
	(vqshluq_n_s32): Likewise.
	(vaddvq_p_s32): Likewise.
	(vsubq_s32): Likewise.
	(vsubq_n_s32): Likewise.
	(vshlq_r_s32): Likewise.
	(vrshlq_s32): Likewise.
	(vrshlq_n_s32): Likewise.
	(vrmulhq_s32): Likewise.
	(vrhaddq_s32): Likewise.
	(vqsubq_s32): Likewise.
	(vqsubq_n_s32): Likewise.
	(vqshlq_s32): Likewise.
	(vqshlq_r_s32): Likewise.
	(vqrshlq_s32): Likewise.
	(vqrshlq_n_s32): Likewise.
	(vqrdmulhq_s32): Likewise.
	(vqrdmulhq_n_s32): Likewise.
	(vqdmulhq_s32): Likewise.
	(vqdmulhq_n_s32): Likewise.
	(vqaddq_s32): Likewise.
	(vqaddq_n_s32): Likewise.
	(vorrq_s32): Likewise.
	(vornq_s32): Likewise.
	(vmulq_s32): Likewise.
	(vmulq_n_s32): Likewise.
	(vmulltq_int_s32): Likewise.
	(vmullbq_int_s32): Likewise.
	(vmulhq_s32): Likewise.
	(vmlsdavxq_s32): Likewise.
	(vmlsdavq_s32): Likewise.
	(vmladavxq_s32): Likewise.
	(vmladavq_s32): Likewise.
	(vminvq_s32): Likewise.
	(vminq_s32): Likewise.
	(vmaxvq_s32): Likewise.
	(vmaxq_s32): Likewise.
	(vhsubq_s32): Likewise.
	(vhsubq_n_s32): Likewise.
	(vhcaddq_rot90_s32): Likewise.
	(vhcaddq_rot270_s32): Likewise.
	(vhaddq_s32): Likewise.
	(vhaddq_n_s32): Likewise.
	(veorq_s32): Likewise.
	(vcaddq_rot90_s32): Likewise.
	(vcaddq_rot270_s32): Likewise.
	(vbrsrq_n_s32): Likewise.
	(vbicq_s32): Likewise.
	(vandq_s32): Likewise.
	(vaddvaq_s32): Likewise.
	(vaddq_n_s32): Likewise.
	(vabdq_s32): Likewise.
	(vshlq_n_s32): Likewise.
	(vrshrq_n_s32): Likewise.
	(vqshlq_n_s32): Likewise.
	(__arm_vsubq_u8): Define intrinsic.
	(__arm_vsubq_n_u8): Likewise.
	(__arm_vrmulhq_u8): Likewise.
	(__arm_vrhaddq_u8): Likewise.
	(__arm_vqsubq_u8): Likewise.
	(__arm_vqsubq_n_u8): Likewise.
	(__arm_vqaddq_u8): Likewise.
	(__arm_vqaddq_n_u8): Likewise.
	(__arm_vorrq_u8): Likewise.
	(__arm_vornq_u8): Likewise.
	(__arm_vmulq_u8): Likewise.
	(__arm_vmulq_n_u8): Likewise.
	(__arm_vmulltq_int_u8): Likewise.
	(__arm_vmullbq_int_u8): Likewise.
	(__arm_vmulhq_u8): Likewise.
	(__arm_vmladavq_u8): Likewise.
	(__arm_vminvq_u8): Likewise.
	(__arm_vminq_u8): Likewise.
	(__arm_vmaxvq_u8): Likewise.
	(__arm_vmaxq_u8): Likewise.
	(__arm_vhsubq_u8): Likewise.
	(__arm_vhsubq_n_u8): Likewise.
	(__arm_vhaddq_u8): Likewise.
	(__arm_vhaddq_n_u8): Likewise.
	(__arm_veorq_u8): Likewise.
	(__arm_vcmpneq_n_u8): Likewise.
	(__arm_vcmphiq_u8): Likewise.
	(__arm_vcmphiq_n_u8): Likewise.
	(__arm_vcmpeqq_u8): Likewise.
	(__arm_vcmpeqq_n_u8): Likewise.
	(__arm_vcmpcsq_u8): Likewise.
	(__arm_vcmpcsq_n_u8): Likewise.
	(__arm_vcaddq_rot90_u8): Likewise.
	(__arm_vcaddq_rot270_u8): Likewise.
	(__arm_vbicq_u8): Likewise.
	(__arm_vandq_u8): Likewise.
	(__arm_vaddvq_p_u8): Likewise.
	(__arm_vaddvaq_u8): Likewise.
	(__arm_vaddq_n_u8): Likewise.
	(__arm_vabdq_u8): Likewise.
	(__arm_vshlq_r_u8): Likewise.
	(__arm_vrshlq_u8): Likewise.
	(__arm_vrshlq_n_u8): Likewise.
	(__arm_vqshlq_u8): Likewise.
	(__arm_vqshlq_r_u8): Likewise.
	(__arm_vqrshlq_u8): Likewise.
	(__arm_vqrshlq_n_u8): Likewise.
	(__arm_vminavq_s8): Likewise.
	(__arm_vminaq_s8): Likewise.
	(__arm_vmaxavq_s8): Likewise.
	(__arm_vmaxaq_s8): Likewise.
	(__arm_vbrsrq_n_u8): Likewise.
	(__arm_vshlq_n_u8): Likewise.
	(__arm_vrshrq_n_u8): Likewise.
	(__arm_vqshlq_n_u8): Likewise.
	(__arm_vcmpneq_n_s8): Likewise.
	(__arm_vcmpltq_s8): Likewise.
	(__arm_vcmpltq_n_s8): Likewise.
	(__arm_vcmpleq_s8): Likewise.
	(__arm_vcmpleq_n_s8): Likewise.
	(__arm_vcmpgtq_s8): Likewise.
	(__arm_vcmpgtq_n_s8): Likewise.
	(__arm_vcmpgeq_s8): Likewise.
	(__arm_vcmpgeq_n_s8): Likewise.
	(__arm_vcmpeqq_s8): Likewise.
	(__arm_vcmpeqq_n_s8): Likewise.
	(__arm_vqshluq_n_s8): Likewise.
	(__arm_vaddvq_p_s8): Likewise.
	(__arm_vsubq_s8): Likewise.
	(__arm_vsubq_n_s8): Likewise.
	(__arm_vshlq_r_s8): Likewise.
	(__arm_vrshlq_s8): Likewise.
	(__arm_vrshlq_n_s8): Likewise.
	(__arm_vrmulhq_s8): Likewise.
	(__arm_vrhaddq_s8): Likewise.
	(__arm_vqsubq_s8): Likewise.
	(__arm_vqsubq_n_s8): Likewise.
	(__arm_vqshlq_s8): Likewise.
	(__arm_vqshlq_r_s8): Likewise.
	(__arm_vqrshlq_s8): Likewise.
	(__arm_vqrshlq_n_s8): Likewise.
	(__arm_vqrdmulhq_s8): Likewise.
	(__arm_vqrdmulhq_n_s8): Likewise.
	(__arm_vqdmulhq_s8): Likewise.
	(__arm_vqdmulhq_n_s8): Likewise.
	(__arm_vqaddq_s8): Likewise.
	(__arm_vqaddq_n_s8): Likewise.
	(__arm_vorrq_s8): Likewise.
	(__arm_vornq_s8): Likewise.
	(__arm_vmulq_s8): Likewise.
	(__arm_vmulq_n_s8): Likewise.
	(__arm_vmulltq_int_s8): Likewise.
	(__arm_vmullbq_int_s8): Likewise.
	(__arm_vmulhq_s8): Likewise.
	(__arm_vmlsdavxq_s8): Likewise.
	(__arm_vmlsdavq_s8): Likewise.
	(__arm_vmladavxq_s8): Likewise.
	(__arm_vmladavq_s8): Likewise.
	(__arm_vminvq_s8): Likewise.
	(__arm_vminq_s8): Likewise.
	(__arm_vmaxvq_s8): Likewise.
	(__arm_vmaxq_s8): Likewise.
	(__arm_vhsubq_s8): Likewise.
	(__arm_vhsubq_n_s8): Likewise.
	(__arm_vhcaddq_rot90_s8): Likewise.
	(__arm_vhcaddq_rot270_s8): Likewise.
	(__arm_vhaddq_s8): Likewise.
	(__arm_vhaddq_n_s8): Likewise.
	(__arm_veorq_s8): Likewise.
	(__arm_vcaddq_rot90_s8): Likewise.
	(__arm_vcaddq_rot270_s8): Likewise.
	(__arm_vbrsrq_n_s8): Likewise.
	(__arm_vbicq_s8): Likewise.
	(__arm_vandq_s8): Likewise.
	(__arm_vaddvaq_s8): Likewise.
	(__arm_vaddq_n_s8): Likewise.
	(__arm_vabdq_s8): Likewise.
	(__arm_vshlq_n_s8): Likewise.
	(__arm_vrshrq_n_s8): Likewise.
	(__arm_vqshlq_n_s8): Likewise.
	(__arm_vsubq_u16): Likewise.
	(__arm_vsubq_n_u16): Likewise.
	(__arm_vrmulhq_u16): Likewise.
	(__arm_vrhaddq_u16): Likewise.
	(__arm_vqsubq_u16): Likewise.
	(__arm_vqsubq_n_u16): Likewise.
	(__arm_vqaddq_u16): Likewise.
	(__arm_vqaddq_n_u16): Likewise.
	(__arm_vorrq_u16): Likewise.
	(__arm_vornq_u16): Likewise.
	(__arm_vmulq_u16): Likewise.
	(__arm_vmulq_n_u16): Likewise.
	(__arm_vmulltq_int_u16): Likewise.
	(__arm_vmullbq_int_u16): Likewise.
	(__arm_vmulhq_u16): Likewise.
	(__arm_vmladavq_u16): Likewise.
	(__arm_vminvq_u16): Likewise.
	(__arm_vminq_u16): Likewise.
	(__arm_vmaxvq_u16): Likewise.
	(__arm_vmaxq_u16): Likewise.
	(__arm_vhsubq_u16): Likewise.
	(__arm_vhsubq_n_u16): Likewise.
	(__arm_vhaddq_u16): Likewise.
	(__arm_vhaddq_n_u16): Likewise.
	(__arm_veorq_u16): Likewise.
	(__arm_vcmpneq_n_u16): Likewise.
	(__arm_vcmphiq_u16): Likewise.
	(__arm_vcmphiq_n_u16): Likewise.
	(__arm_vcmpeqq_u16): Likewise.
	(__arm_vcmpeqq_n_u16): Likewise.
	(__arm_vcmpcsq_u16): Likewise.
	(__arm_vcmpcsq_n_u16): Likewise.
	(__arm_vcaddq_rot90_u16): Likewise.
	(__arm_vcaddq_rot270_u16): Likewise.
	(__arm_vbicq_u16): Likewise.
	(__arm_vandq_u16): Likewise.
	(__arm_vaddvq_p_u16): Likewise.
	(__arm_vaddvaq_u16): Likewise.
	(__arm_vaddq_n_u16): Likewise.
	(__arm_vabdq_u16): Likewise.
	(__arm_vshlq_r_u16): Likewise.
	(__arm_vrshlq_u16): Likewise.
	(__arm_vrshlq_n_u16): Likewise.
	(__arm_vqshlq_u16): Likewise.
	(__arm_vqshlq_r_u16): Likewise.
	(__arm_vqrshlq_u16): Likewise.
	(__arm_vqrshlq_n_u16): Likewise.
	(__arm_vminavq_s16): Likewise.
	(__arm_vminaq_s16): Likewise.
	(__arm_vmaxavq_s16): Likewise.
	(__arm_vmaxaq_s16): Likewise.
	(__arm_vbrsrq_n_u16): Likewise.
	(__arm_vshlq_n_u16): Likewise.
	(__arm_vrshrq_n_u16): Likewise.
	(__arm_vqshlq_n_u16): Likewise.
	(__arm_vcmpneq_n_s16): Likewise.
	(__arm_vcmpltq_s16): Likewise.
	(__arm_vcmpltq_n_s16): Likewise.
	(__arm_vcmpleq_s16): Likewise.
	(__arm_vcmpleq_n_s16): Likewise.
	(__arm_vcmpgtq_s16): Likewise.
	(__arm_vcmpgtq_n_s16): Likewise.
	(__arm_vcmpgeq_s16): Likewise.
	(__arm_vcmpgeq_n_s16): Likewise.
	(__arm_vcmpeqq_s16): Likewise.
	(__arm_vcmpeqq_n_s16): Likewise.
	(__arm_vqshluq_n_s16): Likewise.
	(__arm_vaddvq_p_s16): Likewise.
	(__arm_vsubq_s16): Likewise.
	(__arm_vsubq_n_s16): Likewise.
	(__arm_vshlq_r_s16): Likewise.
	(__arm_vrshlq_s16): Likewise.
	(__arm_vrshlq_n_s16): Likewise.
	(__arm_vrmulhq_s16): Likewise.
	(__arm_vrhaddq_s16): Likewise.
	(__arm_vqsubq_s16): Likewise.
	(__arm_vqsubq_n_s16): Likewise.
	(__arm_vqshlq_s16): Likewise.
	(__arm_vqshlq_r_s16): Likewise.
	(__arm_vqrshlq_s16): Likewise.
	(__arm_vqrshlq_n_s16): Likewise.
	(__arm_vqrdmulhq_s16): Likewise.
	(__arm_vqrdmulhq_n_s16): Likewise.
	(__arm_vqdmulhq_s16): Likewise.
	(__arm_vqdmulhq_n_s16): Likewise.
	(__arm_vqaddq_s16): Likewise.
	(__arm_vqaddq_n_s16): Likewise.
	(__arm_vorrq_s16): Likewise.
	(__arm_vornq_s16): Likewise.
	(__arm_vmulq_s16): Likewise.
	(__arm_vmulq_n_s16): Likewise.
	(__arm_vmulltq_int_s16): Likewise.
	(__arm_vmullbq_int_s16): Likewise.
	(__arm_vmulhq_s16): Likewise.
	(__arm_vmlsdavxq_s16): Likewise.
	(__arm_vmlsdavq_s16): Likewise.
	(__arm_vmladavxq_s16): Likewise.
	(__arm_vmladavq_s16): Likewise.
	(__arm_vminvq_s16): Likewise.
	(__arm_vminq_s16): Likewise.
	(__arm_vmaxvq_s16): Likewise.
	(__arm_vmaxq_s16): Likewise.
	(__arm_vhsubq_s16): Likewise.
	(__arm_vhsubq_n_s16): Likewise.
	(__arm_vhcaddq_rot90_s16): Likewise.
	(__arm_vhcaddq_rot270_s16): Likewise.
	(__arm_vhaddq_s16): Likewise.
	(__arm_vhaddq_n_s16): Likewise.
	(__arm_veorq_s16): Likewise.
	(__arm_vcaddq_rot90_s16): Likewise.
	(__arm_vcaddq_rot270_s16): Likewise.
	(__arm_vbrsrq_n_s16): Likewise.
	(__arm_vbicq_s16): Likewise.
	(__arm_vandq_s16): Likewise.
	(__arm_vaddvaq_s16): Likewise.
	(__arm_vaddq_n_s16): Likewise.
	(__arm_vabdq_s16): Likewise.
	(__arm_vshlq_n_s16): Likewise.
	(__arm_vrshrq_n_s16): Likewise.
	(__arm_vqshlq_n_s16): Likewise.
	(__arm_vsubq_u32): Likewise.
	(__arm_vsubq_n_u32): Likewise.
	(__arm_vrmulhq_u32): Likewise.
	(__arm_vrhaddq_u32): Likewise.
	(__arm_vqsubq_u32): Likewise.
	(__arm_vqsubq_n_u32): Likewise.
	(__arm_vqaddq_u32): Likewise.
	(__arm_vqaddq_n_u32): Likewise.
	(__arm_vorrq_u32): Likewise.
	(__arm_vornq_u32): Likewise.
	(__arm_vmulq_u32): Likewise.
	(__arm_vmulq_n_u32): Likewise.
	(__arm_vmulltq_int_u32): Likewise.
	(__arm_vmullbq_int_u32): Likewise.
	(__arm_vmulhq_u32): Likewise.
	(__arm_vmladavq_u32): Likewise.
	(__arm_vminvq_u32): Likewise.
	(__arm_vminq_u32): Likewise.
	(__arm_vmaxvq_u32): Likewise.
	(__arm_vmaxq_u32): Likewise.
	(__arm_vhsubq_u32): Likewise.
	(__arm_vhsubq_n_u32): Likewise.
	(__arm_vhaddq_u32): Likewise.
	(__arm_vhaddq_n_u32): Likewise.
	(__arm_veorq_u32): Likewise.
	(__arm_vcmpneq_n_u32): Likewise.
	(__arm_vcmphiq_u32): Likewise.
	(__arm_vcmphiq_n_u32): Likewise.
	(__arm_vcmpeqq_u32): Likewise.
	(__arm_vcmpeqq_n_u32): Likewise.
	(__arm_vcmpcsq_u32): Likewise.
	(__arm_vcmpcsq_n_u32): Likewise.
	(__arm_vcaddq_rot90_u32): Likewise.
	(__arm_vcaddq_rot270_u32): Likewise.
	(__arm_vbicq_u32): Likewise.
	(__arm_vandq_u32): Likewise.
	(__arm_vaddvq_p_u32): Likewise.
	(__arm_vaddvaq_u32): Likewise.
	(__arm_vaddq_n_u32): Likewise.
	(__arm_vabdq_u32): Likewise.
	(__arm_vshlq_r_u32): Likewise.
	(__arm_vrshlq_u32): Likewise.
	(__arm_vrshlq_n_u32): Likewise.
	(__arm_vqshlq_u32): Likewise.
	(__arm_vqshlq_r_u32): Likewise.
	(__arm_vqrshlq_u32): Likewise.
	(__arm_vqrshlq_n_u32): Likewise.
	(__arm_vminavq_s32): Likewise.
	(__arm_vminaq_s32): Likewise.
	(__arm_vmaxavq_s32): Likewise.
	(__arm_vmaxaq_s32): Likewise.
	(__arm_vbrsrq_n_u32): Likewise.
	(__arm_vshlq_n_u32): Likewise.
	(__arm_vrshrq_n_u32): Likewise.
	(__arm_vqshlq_n_u32): Likewise.
	(__arm_vcmpneq_n_s32): Likewise.
	(__arm_vcmpltq_s32): Likewise.
	(__arm_vcmpltq_n_s32): Likewise.
	(__arm_vcmpleq_s32): Likewise.
	(__arm_vcmpleq_n_s32): Likewise.
	(__arm_vcmpgtq_s32): Likewise.
	(__arm_vcmpgtq_n_s32): Likewise.
	(__arm_vcmpgeq_s32): Likewise.
	(__arm_vcmpgeq_n_s32): Likewise.
	(__arm_vcmpeqq_s32): Likewise.
	(__arm_vcmpeqq_n_s32): Likewise.
	(__arm_vqshluq_n_s32): Likewise.
	(__arm_vaddvq_p_s32): Likewise.
	(__arm_vsubq_s32): Likewise.
	(__arm_vsubq_n_s32): Likewise.
	(__arm_vshlq_r_s32): Likewise.
	(__arm_vrshlq_s32): Likewise.
	(__arm_vrshlq_n_s32): Likewise.
	(__arm_vrmulhq_s32): Likewise.
	(__arm_vrhaddq_s32): Likewise.
	(__arm_vqsubq_s32): Likewise.
	(__arm_vqsubq_n_s32): Likewise.
	(__arm_vqshlq_s32): Likewise.
	(__arm_vqshlq_r_s32): Likewise.
	(__arm_vqrshlq_s32): Likewise.
	(__arm_vqrshlq_n_s32): Likewise.
	(__arm_vqrdmulhq_s32): Likewise.
	(__arm_vqrdmulhq_n_s32): Likewise.
	(__arm_vqdmulhq_s32): Likewise.
	(__arm_vqdmulhq_n_s32): Likewise.
	(__arm_vqaddq_s32): Likewise.
	(__arm_vqaddq_n_s32): Likewise.
	(__arm_vorrq_s32): Likewise.
	(__arm_vornq_s32): Likewise.
	(__arm_vmulq_s32): Likewise.
	(__arm_vmulq_n_s32): Likewise.
	(__arm_vmulltq_int_s32): Likewise.
	(__arm_vmullbq_int_s32): Likewise.
	(__arm_vmulhq_s32): Likewise.
	(__arm_vmlsdavxq_s32): Likewise.
	(__arm_vmlsdavq_s32): Likewise.
	(__arm_vmladavxq_s32): Likewise.
	(__arm_vmladavq_s32): Likewise.
	(__arm_vminvq_s32): Likewise.
	(__arm_vminq_s32): Likewise.
	(__arm_vmaxvq_s32): Likewise.
	(__arm_vmaxq_s32): Likewise.
	(__arm_vhsubq_s32): Likewise.
	(__arm_vhsubq_n_s32): Likewise.
	(__arm_vhcaddq_rot90_s32): Likewise.
	(__arm_vhcaddq_rot270_s32): Likewise.
	(__arm_vhaddq_s32): Likewise.
	(__arm_vhaddq_n_s32): Likewise.
	(__arm_veorq_s32): Likewise.
	(__arm_vcaddq_rot90_s32): Likewise.
	(__arm_vcaddq_rot270_s32): Likewise.
	(__arm_vbrsrq_n_s32): Likewise.
	(__arm_vbicq_s32): Likewise.
	(__arm_vandq_s32): Likewise.
	(__arm_vaddvaq_s32): Likewise.
	(__arm_vaddq_n_s32): Likewise.
	(__arm_vabdq_s32): Likewise.
	(__arm_vshlq_n_s32): Likewise.
	(__arm_vrshrq_n_s32): Likewise.
	(__arm_vqshlq_n_s32): Likewise.
	(vsubq): Define polymorphic variant.
	(vsubq_n): Likewise.
	(vshlq_r): Likewise.
	(vrshlq_n): Likewise.
	(vrshlq): Likewise.
	(vrmulhq): Likewise.
	(vrhaddq): Likewise.
	(vqsubq_n): Likewise.
	(vqsubq): Likewise.
	(vqshlq): Likewise.
	(vqshlq_r): Likewise.
	(vqshluq): Likewise.
	(vrshrq_n): Likewise.
	(vshlq_n): Likewise.
	(vqshluq_n): Likewise.
	(vqshlq_n): Likewise.
	(vqrshlq_n): Likewise.
	(vqrshlq): Likewise.
	(vqrdmulhq_n): Likewise.
	(vqrdmulhq): Likewise.
	(vqdmulhq_n): Likewise.
	(vqdmulhq): Likewise.
	(vqaddq_n): Likewise.
	(vqaddq): Likewise.
	(vorrq_n): Likewise.
	(vorrq): Likewise.
	(vornq): Likewise.
	(vmulq_n): Likewise.
	(vmulq): Likewise.
	(vmulltq_int): Likewise.
	(vmullbq_int): Likewise.
	(vmulhq): Likewise.
	(vminq): Likewise.
	(vminaq): Likewise.
	(vmaxq): Likewise.
	(vmaxaq): Likewise.
	(vhsubq_n): Likewise.
	(vhsubq): Likewise.
	(vhcaddq_rot90): Likewise.
	(vhcaddq_rot270): Likewise.
	(vhaddq_n): Likewise.
	(vhaddq): Likewise.
	(veorq): Likewise.
	(vcaddq_rot90): Likewise.
	(vcaddq_rot270): Likewise.
	(vbrsrq_n): Likewise.
	(vbicq_n): Likewise.
	(vbicq): Likewise.
	(vaddq): Likewise.
	(vaddq_n): Likewise.
	(vandq): Likewise.
	(vabdq): Likewise.
	* config/arm/arm_mve_builtins.def (BINOP_NONE_NONE_IMM): Use it.
	(BINOP_NONE_NONE_NONE): Likewise.
	(BINOP_NONE_NONE_UNONE): Likewise.
	(BINOP_UNONE_NONE_IMM): Likewise.
	(BINOP_UNONE_NONE_NONE): Likewise.
	(BINOP_UNONE_UNONE_IMM): Likewise.
	(BINOP_UNONE_UNONE_NONE): Likewise.
	(BINOP_UNONE_UNONE_UNONE): Likewise.
	* config/arm/constraints.md (Ra): Define constraint to check constant is
	in the range of 0 to 7.
	(Rg): Define constriant to check the constant is one among 1, 2, 4
	and 8.
	* config/arm/mve.md (mve_vabdq_<supf>): Define RTL pattern.
	(mve_vaddq_n_<supf>): Likewise.
	(mve_vaddvaq_<supf>): Likewise.
	(mve_vaddvq_p_<supf>): Likewise.
	(mve_vandq_<supf>): Likewise.
	(mve_vbicq_<supf>): Likewise.
	(mve_vbrsrq_n_<supf>): Likewise.
	(mve_vcaddq_rot270_<supf>): Likewise.
	(mve_vcaddq_rot90_<supf>): Likewise.
	(mve_vcmpcsq_n_u): Likewise.
	(mve_vcmpcsq_u): Likewise.
	(mve_vcmpeqq_n_<supf>): Likewise.
	(mve_vcmpeqq_<supf>): Likewise.
	(mve_vcmpgeq_n_s): Likewise.
	(mve_vcmpgeq_s): Likewise.
	(mve_vcmpgtq_n_s): Likewise.
	(mve_vcmpgtq_s): Likewise.
	(mve_vcmphiq_n_u): Likewise.
	(mve_vcmphiq_u): Likewise.
	(mve_vcmpleq_n_s): Likewise.
	(mve_vcmpleq_s): Likewise.
	(mve_vcmpltq_n_s): Likewise.
	(mve_vcmpltq_s): Likewise.
	(mve_vcmpneq_n_<supf>): Likewise.
	(mve_vddupq_n_u): Likewise.
	(mve_veorq_<supf>): Likewise.
	(mve_vhaddq_n_<supf>): Likewise.
	(mve_vhaddq_<supf>): Likewise.
	(mve_vhcaddq_rot270_s): Likewise.
	(mve_vhcaddq_rot90_s): Likewise.
	(mve_vhsubq_n_<supf>): Likewise.
	(mve_vhsubq_<supf>): Likewise.
	(mve_vidupq_n_u): Likewise.
	(mve_vmaxaq_s): Likewise.
	(mve_vmaxavq_s): Likewise.
	(mve_vmaxq_<supf>): Likewise.
	(mve_vmaxvq_<supf>): Likewise.
	(mve_vminaq_s): Likewise.
	(mve_vminavq_s): Likewise.
	(mve_vminq_<supf>): Likewise.
	(mve_vminvq_<supf>): Likewise.
	(mve_vmladavq_<supf>): Likewise.
	(mve_vmladavxq_s): Likewise.
	(mve_vmlsdavq_s): Likewise.
	(mve_vmlsdavxq_s): Likewise.
	(mve_vmulhq_<supf>): Likewise.
	(mve_vmullbq_int_<supf>): Likewise.
	(mve_vmulltq_int_<supf>): Likewise.
	(mve_vmulq_n_<supf>): Likewise.
	(mve_vmulq_<supf>): Likewise.
	(mve_vornq_<supf>): Likewise.
	(mve_vorrq_<supf>): Likewise.
	(mve_vqaddq_n_<supf>): Likewise.
	(mve_vqaddq_<supf>): Likewise.
	(mve_vqdmulhq_n_s): Likewise.
	(mve_vqdmulhq_s): Likewise.
	(mve_vqrdmulhq_n_s): Likewise.
	(mve_vqrdmulhq_s): Likewise.
	(mve_vqrshlq_n_<supf>): Likewise.
	(mve_vqrshlq_<supf>): Likewise.
	(mve_vqshlq_n_<supf>): Likewise.
	(mve_vqshlq_r_<supf>): Likewise.
	(mve_vqshlq_<supf>): Likewise.
	(mve_vqshluq_n_s): Likewise.
	(mve_vqsubq_n_<supf>): Likewise.
	(mve_vqsubq_<supf>): Likewise.
	(mve_vrhaddq_<supf>): Likewise.
	(mve_vrmulhq_<supf>): Likewise.
	(mve_vrshlq_n_<supf>): Likewise.
	(mve_vrshlq_<supf>): Likewise.
	(mve_vrshrq_n_<supf>): Likewise.
	(mve_vshlq_n_<supf>): Likewise.
	(mve_vshlq_r_<supf>): Likewise.
	(mve_vsubq_n_<supf>): Likewise.
	(mve_vsubq_<supf>): Likewise.
	* config/arm/predicates.md (mve_imm_7): Define predicate to check
	the matching constraint Ra.
	(mve_imm_selective_upto_8): Define predicate to check the matching
	constraint Rg.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (BINOP_NONE_NONE_UNONE_QUALIFIERS): Define
	qualifier for binary operands.
	(BINOP_UNONE_NONE_NONE_QUALIFIERS): Likewise.
	(BINOP_UNONE_UNONE_NONE_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vaddlvq_p_s32): Define macro.
	(vaddlvq_p_u32): Likewise.
	(vcmpneq_s8): Likewise.
	(vcmpneq_s16): Likewise.
	(vcmpneq_s32): Likewise.
	(vcmpneq_u8): Likewise.
	(vcmpneq_u16): Likewise.
	(vcmpneq_u32): Likewise.
	(vshlq_s8): Likewise.
	(vshlq_s16): Likewise.
	(vshlq_s32): Likewise.
	(vshlq_u8): Likewise.
	(vshlq_u16): Likewise.
	(vshlq_u32): Likewise.
	(__arm_vaddlvq_p_s32): Define intrinsic.
	(__arm_vaddlvq_p_u32): Likewise.
	(__arm_vcmpneq_s8): Likewise.
	(__arm_vcmpneq_s16): Likewise.
	(__arm_vcmpneq_s32): Likewise.
	(__arm_vcmpneq_u8): Likewise.
	(__arm_vcmpneq_u16): Likewise.
	(__arm_vcmpneq_u32): Likewise.
	(__arm_vshlq_s8): Likewise.
	(__arm_vshlq_s16): Likewise.
	(__arm_vshlq_s32): Likewise.
	(__arm_vshlq_u8): Likewise.
	(__arm_vshlq_u16): Likewise.
	(__arm_vshlq_u32): Likewise.
	(vaddlvq_p): Define polymorphic variant.
	(vcmpneq): Likewise.
	(vshlq): Likewise.
	* config/arm/arm_mve_builtins.def (BINOP_NONE_NONE_UNONE_QUALIFIERS):
	Use it.
	(BINOP_UNONE_NONE_NONE_QUALIFIERS): Likewise.
	(BINOP_UNONE_UNONE_NONE_QUALIFIERS): Likewise.
	* config/arm/mve.md (mve_vaddlvq_p_<supf>v4si): Define RTL pattern.
	(mve_vcmpneq_<supf><mode>): Likewise.
	(mve_vshlq_<supf><mode>): Likewise.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (BINOP_UNONE_UNONE_IMM_QUALIFIERS): Define
	qualifier for binary operands.
	(BINOP_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(BINOP_UNONE_NONE_IMM_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vcvtq_n_s16_f16): Define macro.
	(vcvtq_n_s32_f32): Likewise.
	(vcvtq_n_u16_f16): Likewise.
	(vcvtq_n_u32_f32): Likewise.
	(vcreateq_u8): Likewise.
	(vcreateq_u16): Likewise.
	(vcreateq_u32): Likewise.
	(vcreateq_u64): Likewise.
	(vcreateq_s8): Likewise.
	(vcreateq_s16): Likewise.
	(vcreateq_s32): Likewise.
	(vcreateq_s64): Likewise.
	(vshrq_n_s8): Likewise.
	(vshrq_n_s16): Likewise.
	(vshrq_n_s32): Likewise.
	(vshrq_n_u8): Likewise.
	(vshrq_n_u16): Likewise.
	(vshrq_n_u32): Likewise.
	(__arm_vcreateq_u8): Define intrinsic.
	(__arm_vcreateq_u16): Likewise.
	(__arm_vcreateq_u32): Likewise.
	(__arm_vcreateq_u64): Likewise.
	(__arm_vcreateq_s8): Likewise.
	(__arm_vcreateq_s16): Likewise.
	(__arm_vcreateq_s32): Likewise.
	(__arm_vcreateq_s64): Likewise.
	(__arm_vshrq_n_s8): Likewise.
	(__arm_vshrq_n_s16): Likewise.
	(__arm_vshrq_n_s32): Likewise.
	(__arm_vshrq_n_u8): Likewise.
	(__arm_vshrq_n_u16): Likewise.
	(__arm_vshrq_n_u32): Likewise.
	(__arm_vcvtq_n_s16_f16): Likewise.
	(__arm_vcvtq_n_s32_f32): Likewise.
	(__arm_vcvtq_n_u16_f16): Likewise.
	(__arm_vcvtq_n_u32_f32): Likewise.
	(vshrq_n): Define polymorphic variant.
	* config/arm/arm_mve_builtins.def (BINOP_UNONE_UNONE_IMM_QUALIFIERS):
	Use it.
	(BINOP_UNONE_UNONE_UNONE_QUALIFIERS): Likewise.
	(BINOP_UNONE_NONE_IMM_QUALIFIERS): Likewise.
	* config/arm/constraints.md (Rb): Define constraint to check constant is
	in the range of 1 to 8.
	(Rf): Define constraint to check constant is in the range of 1 to 32.
	* config/arm/mve.md (mve_vcreateq_<supf><mode>): Define RTL pattern.
	(mve_vshrq_n_<supf><mode>): Likewise.
	(mve_vcvtq_n_from_f_<supf><mode>): Likewise.
	* config/arm/predicates.md (mve_imm_8): Define predicate to check
	the matching constraint Rb.
	(mve_imm_32): Define predicate to check the matching constraint Rf.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (BINOP_NONE_NONE_NONE_QUALIFIERS): Define
	qualifier for binary operands.
	(BINOP_NONE_NONE_IMM_QUALIFIERS): Likewise.
	(BINOP_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(BINOP_NONE_UNONE_UNONE_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vsubq_n_f16): Define macro.
	(vsubq_n_f32): Likewise.
	(vbrsrq_n_f16): Likewise.
	(vbrsrq_n_f32): Likewise.
	(vcvtq_n_f16_s16): Likewise.
	(vcvtq_n_f32_s32): Likewise.
	(vcvtq_n_f16_u16): Likewise.
	(vcvtq_n_f32_u32): Likewise.
	(vcreateq_f16): Likewise.
	(vcreateq_f32): Likewise.
	(__arm_vsubq_n_f16): Define intrinsic.
	(__arm_vsubq_n_f32): Likewise.
	(__arm_vbrsrq_n_f16): Likewise.
	(__arm_vbrsrq_n_f32): Likewise.
	(__arm_vcvtq_n_f16_s16): Likewise.
	(__arm_vcvtq_n_f32_s32): Likewise.
	(__arm_vcvtq_n_f16_u16): Likewise.
	(__arm_vcvtq_n_f32_u32): Likewise.
	(__arm_vcreateq_f16): Likewise.
	(__arm_vcreateq_f32): Likewise.
	(vsubq): Define polymorphic variant.
	(vbrsrq): Likewise.
	(vcvtq_n): Likewise.
	* config/arm/arm_mve_builtins.def (BINOP_NONE_NONE_NONE_QUALIFIERS): Use
	it.
	(BINOP_NONE_NONE_IMM_QUALIFIERS): Likewise.
	(BINOP_NONE_UNONE_IMM_QUALIFIERS): Likewise.
	(BINOP_NONE_UNONE_UNONE_QUALIFIERS): Likewise.
	* config/arm/constraints.md (Rd): Define constraint to check constant is
	in the range of 1 to 16.
	* config/arm/mve.md (mve_vsubq_n_f<mode>): Define RTL pattern.
	mve_vbrsrq_n_f<mode>: Likewise.
	mve_vcvtq_n_to_f_<supf><mode>: Likewise.
	mve_vcreateq_f<mode>: Likewise.
	* config/arm/predicates.md (mve_imm_16): Define predicate to check
	the matching constraint Rd.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (hi_UP): Define mode.
	* config/arm/arm.h (IS_VPR_REGNUM): Move.
	* config/arm/arm.md (VPR_REGNUM): Define before APSRQ_REGNUM.
	(APSRQ_REGNUM): Modify.
	(APSRGE_REGNUM): Modify.
	* config/arm/arm_mve.h (vctp16q): Define macro.
	(vctp32q): Likewise.
	(vctp64q): Likewise.
	(vctp8q): Likewise.
	(vpnot): Likewise.
	(__arm_vctp16q): Define intrinsic.
	(__arm_vctp32q): Likewise.
	(__arm_vctp64q): Likewise.
	(__arm_vctp8q): Likewise.
	(__arm_vpnot): Likewise.
	* config/arm/arm_mve_builtins.def (UNOP_UNONE_UNONE): Use builtin
	qualifier.
	* config/arm/mve.md (mve_vctp<mode1>qhi): Define RTL pattern.
	(mve_vpnothi): Likewise.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm.h (enum reg_class): Define new class EVEN_REGS.
	* config/arm/arm_mve.h (vdupq_n_s8): Define macro.
	(vdupq_n_s16): Likewise.
	(vdupq_n_s32): Likewise.
	(vabsq_s8): Likewise.
	(vabsq_s16): Likewise.
	(vabsq_s32): Likewise.
	(vclsq_s8): Likewise.
	(vclsq_s16): Likewise.
	(vclsq_s32): Likewise.
	(vclzq_s8): Likewise.
	(vclzq_s16): Likewise.
	(vclzq_s32): Likewise.
	(vnegq_s8): Likewise.
	(vnegq_s16): Likewise.
	(vnegq_s32): Likewise.
	(vaddlvq_s32): Likewise.
	(vaddvq_s8): Likewise.
	(vaddvq_s16): Likewise.
	(vaddvq_s32): Likewise.
	(vmovlbq_s8): Likewise.
	(vmovlbq_s16): Likewise.
	(vmovltq_s8): Likewise.
	(vmovltq_s16): Likewise.
	(vmvnq_s8): Likewise.
	(vmvnq_s16): Likewise.
	(vmvnq_s32): Likewise.
	(vrev16q_s8): Likewise.
	(vrev32q_s8): Likewise.
	(vrev32q_s16): Likewise.
	(vqabsq_s8): Likewise.
	(vqabsq_s16): Likewise.
	(vqabsq_s32): Likewise.
	(vqnegq_s8): Likewise.
	(vqnegq_s16): Likewise.
	(vqnegq_s32): Likewise.
	(vcvtaq_s16_f16): Likewise.
	(vcvtaq_s32_f32): Likewise.
	(vcvtnq_s16_f16): Likewise.
	(vcvtnq_s32_f32): Likewise.
	(vcvtpq_s16_f16): Likewise.
	(vcvtpq_s32_f32): Likewise.
	(vcvtmq_s16_f16): Likewise.
	(vcvtmq_s32_f32): Likewise.
	(vmvnq_u8): Likewise.
	(vmvnq_u16): Likewise.
	(vmvnq_u32): Likewise.
	(vdupq_n_u8): Likewise.
	(vdupq_n_u16): Likewise.
	(vdupq_n_u32): Likewise.
	(vclzq_u8): Likewise.
	(vclzq_u16): Likewise.
	(vclzq_u32): Likewise.
	(vaddvq_u8): Likewise.
	(vaddvq_u16): Likewise.
	(vaddvq_u32): Likewise.
	(vrev32q_u8): Likewise.
	(vrev32q_u16): Likewise.
	(vmovltq_u8): Likewise.
	(vmovltq_u16): Likewise.
	(vmovlbq_u8): Likewise.
	(vmovlbq_u16): Likewise.
	(vrev16q_u8): Likewise.
	(vaddlvq_u32): Likewise.
	(vcvtpq_u16_f16): Likewise.
	(vcvtpq_u32_f32): Likewise.
	(vcvtnq_u16_f16): Likewise.
	(vcvtmq_u16_f16): Likewise.
	(vcvtmq_u32_f32): Likewise.
	(vcvtaq_u16_f16): Likewise.
	(vcvtaq_u32_f32): Likewise.
	(__arm_vdupq_n_s8): Define intrinsic.
	(__arm_vdupq_n_s16): Likewise.
	(__arm_vdupq_n_s32): Likewise.
	(__arm_vabsq_s8): Likewise.
	(__arm_vabsq_s16): Likewise.
	(__arm_vabsq_s32): Likewise.
	(__arm_vclsq_s8): Likewise.
	(__arm_vclsq_s16): Likewise.
	(__arm_vclsq_s32): Likewise.
	(__arm_vclzq_s8): Likewise.
	(__arm_vclzq_s16): Likewise.
	(__arm_vclzq_s32): Likewise.
	(__arm_vnegq_s8): Likewise.
	(__arm_vnegq_s16): Likewise.
	(__arm_vnegq_s32): Likewise.
	(__arm_vaddlvq_s32): Likewise.
	(__arm_vaddvq_s8): Likewise.
	(__arm_vaddvq_s16): Likewise.
	(__arm_vaddvq_s32): Likewise.
	(__arm_vmovlbq_s8): Likewise.
	(__arm_vmovlbq_s16): Likewise.
	(__arm_vmovltq_s8): Likewise.
	(__arm_vmovltq_s16): Likewise.
	(__arm_vmvnq_s8): Likewise.
	(__arm_vmvnq_s16): Likewise.
	(__arm_vmvnq_s32): Likewise.
	(__arm_vrev16q_s8): Likewise.
	(__arm_vrev32q_s8): Likewise.
	(__arm_vrev32q_s16): Likewise.
	(__arm_vqabsq_s8): Likewise.
	(__arm_vqabsq_s16): Likewise.
	(__arm_vqabsq_s32): Likewise.
	(__arm_vqnegq_s8): Likewise.
	(__arm_vqnegq_s16): Likewise.
	(__arm_vqnegq_s32): Likewise.
	(__arm_vmvnq_u8): Likewise.
	(__arm_vmvnq_u16): Likewise.
	(__arm_vmvnq_u32): Likewise.
	(__arm_vdupq_n_u8): Likewise.
	(__arm_vdupq_n_u16): Likewise.
	(__arm_vdupq_n_u32): Likewise.
	(__arm_vclzq_u8): Likewise.
	(__arm_vclzq_u16): Likewise.
	(__arm_vclzq_u32): Likewise.
	(__arm_vaddvq_u8): Likewise.
	(__arm_vaddvq_u16): Likewise.
	(__arm_vaddvq_u32): Likewise.
	(__arm_vrev32q_u8): Likewise.
	(__arm_vrev32q_u16): Likewise.
	(__arm_vmovltq_u8): Likewise.
	(__arm_vmovltq_u16): Likewise.
	(__arm_vmovlbq_u8): Likewise.
	(__arm_vmovlbq_u16): Likewise.
	(__arm_vrev16q_u8): Likewise.
	(__arm_vaddlvq_u32): Likewise.
	(__arm_vcvtpq_u16_f16): Likewise.
	(__arm_vcvtpq_u32_f32): Likewise.
	(__arm_vcvtnq_u16_f16): Likewise.
	(__arm_vcvtmq_u16_f16): Likewise.
	(__arm_vcvtmq_u32_f32): Likewise.
	(__arm_vcvtaq_u16_f16): Likewise.
	(__arm_vcvtaq_u32_f32): Likewise.
	(__arm_vcvtaq_s16_f16): Likewise.
	(__arm_vcvtaq_s32_f32): Likewise.
	(__arm_vcvtnq_s16_f16): Likewise.
	(__arm_vcvtnq_s32_f32): Likewise.
	(__arm_vcvtpq_s16_f16): Likewise.
	(__arm_vcvtpq_s32_f32): Likewise.
	(__arm_vcvtmq_s16_f16): Likewise.
	(__arm_vcvtmq_s32_f32): Likewise.
	(vdupq_n): Define polymorphic variant.
	(vabsq): Likewise.
	(vclsq): Likewise.
	(vclzq): Likewise.
	(vnegq): Likewise.
	(vaddlvq): Likewise.
	(vaddvq): Likewise.
	(vmovlbq): Likewise.
	(vmovltq): Likewise.
	(vmvnq): Likewise.
	(vrev16q): Likewise.
	(vrev32q): Likewise.
	(vqabsq): Likewise.
	(vqnegq): Likewise.
	* config/arm/arm_mve_builtins.def (UNOP_SNONE_SNONE): Use it.
	(UNOP_SNONE_NONE): Likewise.
	(UNOP_UNONE_UNONE): Likewise.
	(UNOP_UNONE_NONE): Likewise.
	* config/arm/constraints.md (e): Define new constriant to allow only
	even registers.
	* config/arm/mve.md (mve_vqabsq_s<mode>): Define RTL pattern.
	(mve_vnegq_s<mode>): Likewise.
	(mve_vmvnq_<supf><mode>): Likewise.
	(mve_vdupq_n_<supf><mode>): Likewise.
	(mve_vclzq_<supf><mode>): Likewise.
	(mve_vclsq_s<mode>): Likewise.
	(mve_vaddvq_<supf><mode>): Likewise.
	(mve_vabsq_s<mode>): Likewise.
	(mve_vrev32q_<supf><mode>): Likewise.
	(mve_vmovltq_<supf><mode>): Likewise.
	(mve_vmovlbq_<supf><mode>): Likewise.
	(mve_vcvtpq_<supf><mode>): Likewise.
	(mve_vcvtnq_<supf><mode>): Likewise.
	(mve_vcvtmq_<supf><mode>): Likewise.
	(mve_vcvtaq_<supf><mode>): Likewise.
	(mve_vrev16q_<supf>v16qi): Likewise.
	(mve_vaddlvq_<supf>v4si): Likewise.

2020-03-17  Jakub Jelinek  <jakub@redhat.com>

	* lra-spills.c (remove_pseudos): Fix up duplicated word issue in
	a dump message.
	* tree-sra.c (create_access_replacement): Fix up duplicated word issue
	in a comment.
	* read-rtl-function.c (find_param_by_name,
	function_reader::parse_enum_value, function_reader::get_insn_by_uid):
	Likewise.
	* spellcheck.c (get_edit_distance_cutoff): Likewise.
	* tree-data-ref.c (create_ifn_alias_checks): Likewise.
	* tree.def (SWITCH_EXPR): Likewise.
	* selftest.c (assert_str_contains): Likewise.
	* ipa-param-manipulation.h (class ipa_param_body_adjustments):
	Likewise.
	* tree-ssa-math-opts.c (convert_expand_mult_copysign): Likewise.
	* tree-ssa-loop-split.c (find_vdef_in_loop): Likewise.
	* langhooks.h (struct lang_hooks_for_decls): Likewise.
	* ipa-prop.h (struct ipa_param_descriptor): Likewise.
	* tree-ssa-strlen.c (handle_builtin_string_cmp, handle_store):
	Likewise.
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Likewise.
	* tree-ssa-reassoc.c (reassociate_bb): Likewise.
	* tree.c (component_ref_size): Likewise.
	* hsa-common.c (hsa_init_compilation_unit_data): Likewise.
	* gimple-ssa-sprintf.c (get_string_length, format_string,
	format_directive): Likewise.
	* omp-grid.c (grid_process_kernel_body_copy): Likewise.
	* input.c (string_concat_db::get_string_concatenation,
	test_lexer_string_locations_ucn4): Likewise.
	* cfgexpand.c (pass_expand::execute): Likewise.
	* gimple-ssa-warn-restrict.c (builtin_memref::offset_out_of_bounds,
	maybe_diag_overlap): Likewise.
	* rtl.c (RTX_CODE_HWINT_P_1): Likewise.
	* shrink-wrap.c (spread_components): Likewise.
	* tree-ssa-dse.c (initialize_ao_ref_for_dse, valid_ao_ref_for_dse):
	Likewise.
	* tree-call-cdce.c (shrink_wrap_one_built_in_call_with_conds):
	Likewise.
	* dwarf2out.c (dwarf2out_early_finish): Likewise.
	* gimple-ssa-store-merging.c: Likewise.
	* ira-costs.c (record_operand_costs): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Likewise.
	* target.def (dispatch): Likewise.
	(validate_dims, gen_ccmp_first): Fix up duplicated word issue
	in documentation text.
	* doc/tm.texi: Regenerated.
	* config/i386/x86-tune.def (X86_TUNE_PARTIAL_FLAG_REG_STALL): Fix up
	duplicated word issue in a comment.
	* config/i386/i386.c (ix86_test_loading_unspec): Likewise.
	* config/i386/i386-features.c (remove_partial_avx_dependency):
	Likewise.
	* config/msp430/msp430.c (msp430_select_section): Likewise.
	* config/gcn/gcn-run.c (load_image): Likewise.
	* config/aarch64/aarch64-sve.md (sve_ld1r<mode>): Likewise.
	* config/aarch64/aarch64.c (aarch64_gen_adjusted_ldpstp): Likewise.
	* config/aarch64/falkor-tag-collision-avoidance.c
	(single_dest_per_chain): Likewise.
	* config/nvptx/nvptx.c (nvptx_record_fndecl): Likewise.
	* config/fr30/fr30.c (fr30_arg_partial_bytes): Likewise.
	* config/rs6000/rs6000-string.c (expand_cmp_vec_sequence): Likewise.
	* config/rs6000/rs6000-p8swap.c (replace_swapped_load_constant):
	Likewise.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Likewise.
	* config/rs6000/rs6000-logue.c
	(rs6000_emit_probe_stack_range_stack_clash): Likewise.
	* config/nds32/nds32-md-auxiliary.c (nds32_split_ashiftdi3): Likewise.
	Fix various other issues in the comment.

2020-03-17  Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/t-rmprofile: create new multilib for
	armv8.1-m.main+mve hard float and reuse v8-m.main ones for
	v8.1-m.main+mve.

2020-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94015
	* tree-ssa-strlen.c (count_nonzero_bytes): Split portions of the
	function where EXP is address of the bytes being stored rather than
	the bytes themselves into count_nonzero_bytes_addr.  Punt on zero
	sized MEM_REF.  Use VAR_P macro and handle CONST_DECL like VAR_DECLs.
	Use ctor_for_folding instead of looking at DECL_INITIAL.  Punt before
	calling native_encode_expr if host or target doesn't have 8-bit
	chars.  Formatting fixes.
	(count_nonzero_bytes_addr): New function.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (UNOP_SNONE_SNONE_QUALIFIERS): Define.
	(UNOP_SNONE_NONE_QUALIFIERS): Likewise.
	(UNOP_SNONE_IMM_QUALIFIERS): Likewise.
	(UNOP_UNONE_NONE_QUALIFIERS): Likewise.
	(UNOP_UNONE_UNONE_QUALIFIERS): Likewise.
	(UNOP_UNONE_IMM_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vmvnq_n_s16): Define macro.
	(vmvnq_n_s32): Likewise.
	(vrev64q_s8): Likewise.
	(vrev64q_s16): Likewise.
	(vrev64q_s32): Likewise.
	(vcvtq_s16_f16): Likewise.
	(vcvtq_s32_f32): Likewise.
	(vrev64q_u8): Likewise.
	(vrev64q_u16): Likewise.
	(vrev64q_u32): Likewise.
	(vmvnq_n_u16): Likewise.
	(vmvnq_n_u32): Likewise.
	(vcvtq_u16_f16): Likewise.
	(vcvtq_u32_f32): Likewise.
	(__arm_vmvnq_n_s16): Define intrinsic.
	(__arm_vmvnq_n_s32): Likewise.
	(__arm_vrev64q_s8): Likewise.
	(__arm_vrev64q_s16): Likewise.
	(__arm_vrev64q_s32): Likewise.
	(__arm_vrev64q_u8): Likewise.
	(__arm_vrev64q_u16): Likewise.
	(__arm_vrev64q_u32): Likewise.
	(__arm_vmvnq_n_u16): Likewise.
	(__arm_vmvnq_n_u32): Likewise.
	(__arm_vcvtq_s16_f16): Likewise.
	(__arm_vcvtq_s32_f32): Likewise.
	(__arm_vcvtq_u16_f16): Likewise.
	(__arm_vcvtq_u32_f32): Likewise.
	(vrev64q): Define polymorphic variant.
	* config/arm/arm_mve_builtins.def (UNOP_SNONE_SNONE): Use it.
	(UNOP_SNONE_NONE): Likewise.
	(UNOP_SNONE_IMM): Likewise.
	(UNOP_UNONE_UNONE): Likewise.
	(UNOP_UNONE_NONE): Likewise.
	(UNOP_UNONE_IMM): Likewise.
	* config/arm/mve.md (mve_vrev64q_<supf><mode>): Define RTL pattern.
	(mve_vcvtq_from_f_<supf><mode>): Likewise.
	(mve_vmvnq_n_<supf><mode>): Likewise.

2020-03-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (UNOP_NONE_NONE_QUALIFIERS): Define macro.
	(UNOP_NONE_SNONE_QUALIFIERS): Likewise.
	(UNOP_NONE_UNONE_QUALIFIERS): Likewise.
	* config/arm/arm_mve.h (vrndxq_f16): Define macro.
	(vrndxq_f32): Likewise.
	(vrndq_f16) Likewise.
	(vrndq_f32): Likewise.
	(vrndpq_f16): Likewise.
	(vrndpq_f32): Likewise.
	(vrndnq_f16): Likewise.
	(vrndnq_f32): Likewise.
	(vrndmq_f16): Likewise.
	(vrndmq_f32): Likewise. 
	(vrndaq_f16): Likewise.
	(vrndaq_f32): Likewise.
	(vrev64q_f16): Likewise.
	(vrev64q_f32): Likewise.
	(vnegq_f16): Likewise.
	(vnegq_f32): Likewise.
	(vdupq_n_f16): Likewise.
	(vdupq_n_f32): Likewise.
	(vabsq_f16): Likewise.
	(vabsq_f32): Likewise.
	(vrev32q_f16): Likewise.
	(vcvttq_f32_f16): Likewise.
	(vcvtbq_f32_f16): Likewise.
	(vcvtq_f16_s16): Likewise.
	(vcvtq_f32_s32): Likewise.
	(vcvtq_f16_u16): Likewise.
	(vcvtq_f32_u32): Likewise.
	(__arm_vrndxq_f16): Define intrinsic.
	(__arm_vrndxq_f32): Likewise.
	(__arm_vrndq_f16): Likewise.
	(__arm_vrndq_f32): Likewise.
	(__arm_vrndpq_f16): Likewise.
	(__arm_vrndpq_f32): Likewise.
	(__arm_vrndnq_f16): Likewise.
	(__arm_vrndnq_f32): Likewise.
	(__arm_vrndmq_f16): Likewise.
	(__arm_vrndmq_f32): Likewise.
	(__arm_vrndaq_f16): Likewise.
	(__arm_vrndaq_f32): Likewise.
	(__arm_vrev64q_f16): Likewise.
	(__arm_vrev64q_f32): Likewise.
	(__arm_vnegq_f16): Likewise.
	(__arm_vnegq_f32): Likewise.
	(__arm_vdupq_n_f16): Likewise.
	(__arm_vdupq_n_f32): Likewise.
	(__arm_vabsq_f16): Likewise.
	(__arm_vabsq_f32): Likewise.
	(__arm_vrev32q_f16): Likewise.
	(__arm_vcvttq_f32_f16): Likewise.
	(__arm_vcvtbq_f32_f16): Likewise.
	(__arm_vcvtq_f16_s16): Likewise.
	(__arm_vcvtq_f32_s32): Likewise.
	(__arm_vcvtq_f16_u16): Likewise.
	(__arm_vcvtq_f32_u32): Likewise.
	(vrndxq): Define polymorphic variants.
	(vrndq): Likewise.
	(vrndpq): Likewise.
	(vrndnq): Likewise.
	(vrndmq): Likewise.
	(vrndaq): Likewise.
	(vrev64q): Likewise.
	(vnegq): Likewise.
	(vabsq): Likewise.
	(vrev32q): Likewise.
	(vcvtbq_f32): Likewise.
	(vcvttq_f32): Likewise.
	(vcvtq): Likewise.
	* config/arm/arm_mve_builtins.def (VAR2): Define.
	(VAR1): Define.
	* config/arm/mve.md (mve_vrndxq_f<mode>): Add RTL pattern.
	(mve_vrndq_f<mode>): Likewise.
	(mve_vrndpq_f<mode>): Likewise.
	(mve_vrndnq_f<mode>): Likewise.
	(mve_vrndmq_f<mode>): Likewise.
	(mve_vrndaq_f<mode>): Likewise.
	(mve_vrev64q_f<mode>): Likewise.
	(mve_vnegq_f<mode>): Likewise.
	(mve_vdupq_n_f<mode>): Likewise.
	(mve_vabsq_f<mode>): Likewise.
	(mve_vrev32q_fv8hf): Likewise.
	(mve_vcvttq_f32_f16v4sf): Likewise.
	(mve_vcvtbq_f32_f16v4sf): Likewise.
	(mve_vcvtq_to_f_<supf><mode>): Likewise.

2020-03-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm-builtins.c (CF): Define mve_builtin_data.
	(VAR1): Define.
	(ARM_BUILTIN_MVE_PATTERN_START): Define.
	(arm_init_mve_builtins): Define function.
	(arm_init_builtins): Add TARGET_HAVE_MVE check.
	(arm_expand_builtin_1): Check the range of fcode.
	(arm_expand_mve_builtin): Define function to expand MVE builtins.
	(arm_expand_builtin): Check the range of fcode.
	* config/arm/arm_mve.h (__ARM_FEATURE_MVE): Define MVE floating point
	types.
	(__ARM_MVE_PRESERVE_USER_NAMESPACE): Define to protect user namespace.
	(vst4q_s8): Define macro.
	(vst4q_s16): Likewise.
	(vst4q_s32): Likewise.
	(vst4q_u8): Likewise.
	(vst4q_u16): Likewise.
	(vst4q_u32): Likewise.
	(vst4q_f16): Likewise.
	(vst4q_f32): Likewise.
	(__arm_vst4q_s8): Define inline builtin.
	(__arm_vst4q_s16): Likewise.
	(__arm_vst4q_s32): Likewise.
	(__arm_vst4q_u8): Likewise.
	(__arm_vst4q_u16): Likewise.
	(__arm_vst4q_u32): Likewise.
	(__arm_vst4q_f16): Likewise.
	(__arm_vst4q_f32): Likewise.
	(__ARM_mve_typeid): Define macro with MVE types.
	(__ARM_mve_coerce): Define macro with _Generic feature.
	(vst4q): Define polymorphic variant for different vst4q builtins.
	* config/arm/arm_mve_builtins.def: New file.
	* config/arm/iterators.md (VSTRUCT): Modify to allow XI and OI
	modes in MVE.
	* config/arm/mve.md (MVE_VLD_ST): Define iterator.
	(unspec): Define unspec.
	(mve_vst4q<mode>): Define RTL pattern.
	* config/arm/neon.md (mov<mode>): Modify expand to allow XI and OI
	modes in MVE.
	(neon_mov<mode>): Modify RTL define_insn to allow XI and OI modes
	in MVE.
	(define_split): Allow OI mode split for MVE after reload.
	(define_split): Allow XI mode split for MVE after reload.
	* config/arm/t-arm (arm.o): Add entry for arm_mve_builtins.def.
	(arm-builtins.o): Likewise.

2020-03-17  Christophe Lyon  <christophe.lyon@linaro.org>

	* c-typeck.c (process_init_element): Handle constructor_type with
	type size represented by POLY_INT_CST.

2020-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94187
	* tree-ssa-strlen.c (count_nonzero_bytes): Punt if
	nchars - offset < nbytes.

	PR middle-end/94189
	* builtins.c (expand_builtin_strnlen): Do return NULL_RTX if we would
	emit a warning if it was enabled and don't depend on TREE_NO_WARNING
	for code-generation.

2020-03-16  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/94185
	* lra-spills.c (remove_pseudos): Do not reuse insn alternative
	after changing memory subreg.

2020-03-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config/arm/arm.c (arm_libcall_uses_aapcs_base): Modify function to add
	emulator calls for dobule precision arithmetic operations for MVE.

2020-03-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* common/config/arm/arm-common.c (arm_asm_auto_mfpu): When vfp_base
	feature bit is on and -mfpu=auto is passed as compiler option, do not
	generate error on not finding any matching fpu. Because in this case
	fpu is not required.
	* config/arm/arm-cpus.in (vfp_base): Define feature bit, this bit is
	enabled for MVE and also for all VFP extensions.
	(VFPv2): Modify fgroup to enable vfp_base feature bit when ever VFPv2
	is enabled.
	(MVE): Define fgroup to enable feature bits mve, vfp_base and armv7em.
	(MVE_FP): Define fgroup to enable feature bits is fgroup MVE and FPv5
	along with feature bits mve_float.
	(mve): Modify add options in armv8.1-m.main arch for MVE.
	(mve.fp): Modify add options in armv8.1-m.main arch for MVE with
	floating point.
	* config/arm/arm.c (use_return_insn): Replace the
	check with TARGET_VFP_BASE.
	(thumb2_legitimate_index_p): Replace TARGET_HARD_FLOAT with
	TARGET_VFP_BASE.
	(arm_rtx_costs_internal): Replace "TARGET_HARD_FLOAT || TARGET_HAVE_MVE"
	with TARGET_VFP_BASE, to allow cost calculations for copies in MVE as
	well.
	(arm_get_vfp_saved_size): Replace TARGET_HARD_FLOAT with
	TARGET_VFP_BASE, to allow space calculation for VFP registers in MVE
	as well.
	(arm_compute_frame_layout): Likewise.
	(arm_save_coproc_regs): Likewise.
	(arm_fixed_condition_code_regs): Modify to enable using VFPCC_REGNUM
	in MVE as well.
	(arm_hard_regno_mode_ok): Replace "TARGET_HARD_FLOAT || TARGET_HAVE_MVE"
	with equivalent macro TARGET_VFP_BASE.
	(arm_expand_epilogue_apcs_frame): Likewise.
	(arm_expand_epilogue): Likewise.
	(arm_conditional_register_usage): Likewise.
	(arm_declare_function_name): Add check to skip printing .fpu directive
	in assembly file when TARGET_VFP_BASE is enabled and fpu_to_print is
	"softvfp".
	* config/arm/arm.h (TARGET_VFP_BASE): Define.
	* config/arm/arm.md (arch): Add "mve" to arch.
	(eq_attr "arch" "mve"): Enable on TARGET_HAVE_MVE is true.
	(vfp_pop_multiple_with_writeback): Replace "TARGET_HARD_FLOAT
	|| TARGET_HAVE_MVE" with equivalent macro TARGET_VFP_BASE.
	* config/arm/constraints.md (Uf): Define to allow modification to FPCCR
	in MVE.
	* config/arm/thumb2.md (thumb2_movsfcc_soft_insn): Modify target guard
	to not allow for MVE.
	* config/arm/unspecs.md (UNSPEC_GET_FPSCR): Move to volatile unspecs
	enum.
	(VUNSPEC_GET_FPSCR): Define.
	* config/arm/vfp.md (thumb2_movhi_vfp): Add support for VMSR and VMRS
	instructions which move to general-purpose Register from Floating-point
	Special register and vice-versa.
	(thumb2_movhi_fp16): Likewise.
	(thumb2_movsi_vfp): Add support for VMSR and VMRS instructions along
	with MCR and MRC instructions which set and get Floating-point Status
	and Control Register (FPSCR).
	(movdi_vfp): Modify pattern to enable Single-precision scalar float move
	in MVE.
	(thumb2_movdf_vfp): Modify pattern to enable Double-precision scalar
	float move patterns in MVE.
	(thumb2_movsfcc_vfp): Modify pattern to enable single float conditional
	code move patterns of VFP also in MVE by adding TARGET_VFP_BASE check.
	(thumb2_movdfcc_vfp): Modify pattern to enable double float conditional
	code move patterns of VFP also in MVE by adding TARGET_VFP_BASE check.
	(push_multi_vfp): Add support to use VFP VPUSH pattern for MVE by adding
	TARGET_VFP_BASE check.
	(set_fpscr): Add support to set FPSCR register for MVE. Modify pattern
	using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
	register.
	(get_fpscr): Add support to get FPSCR register for MVE. Modify pattern
	using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
	register.


2020-03-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
            Mihail Ionescu  <mihail.ionescu@arm.com>
            Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* config.gcc (arm_mve.h): Include mve intrinsics header file.
	* config/arm/aout.h (p0): Add new register name for MVE predicated
	cases.
	* config/arm-builtins.c (ARM_BUILTIN_SIMD_LANE_CHECK): Define macro
	common to Neon and MVE.
	(ARM_BUILTIN_NEON_LANE_CHECK): Renamed to ARM_BUILTIN_SIMD_LANE_CHECK.
	(arm_init_simd_builtin_types): Disable poly types for MVE.
	(arm_init_neon_builtins): Move a check to arm_init_builtins function.
	(arm_init_builtins): Use ARM_BUILTIN_SIMD_LANE_CHECK instead of
	ARM_BUILTIN_NEON_LANE_CHECK.
	(mve_dereference_pointer): Add function.
	(arm_expand_builtin_args): Call to mve_dereference_pointer when MVE is
	enabled.
	(arm_expand_neon_builtin): Moved to arm_expand_builtin function.
	(arm_expand_builtin): Moved from arm_expand_neon_builtin function.
	* config/arm/arm-c.c (__ARM_FEATURE_MVE): Define macro for MVE and MVE
	with floating point enabled.
	* config/arm/arm-protos.h (neon_immediate_valid_for_move): Renamed to
	simd_immediate_valid_for_move.
	(simd_immediate_valid_for_move): Renamed from
	neon_immediate_valid_for_move function.
	* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Generate
	error if vfpv2 feature bit is disabled and mve feature bit is also
	disabled for HARD_FLOAT_ABI.
	(use_return_insn): Check to not push VFP regs for MVE.
	(aapcs_vfp_allocate): Add MVE check to have same Procedure Call Standard
	as Neon.
	(aapcs_vfp_allocate_return_reg): Likewise.
	(thumb2_legitimate_address_p): Check to return 0 on valid Thumb-2
	address operand for MVE.
	(arm_rtx_costs_internal): MVE check to determine cost of rtx.
	(neon_valid_immediate): Rename to simd_valid_immediate.
	(simd_valid_immediate): Rename from neon_valid_immediate.
	(simd_valid_immediate): MVE check on size of vector is 128 bits.
	(neon_immediate_valid_for_move): Rename to
	simd_immediate_valid_for_move.
	(simd_immediate_valid_for_move): Rename from
	neon_immediate_valid_for_move.
	(neon_immediate_valid_for_logic): Modify call to neon_valid_immediate
	function.
	(neon_make_constant): Modify call to neon_valid_immediate function.
	(neon_vector_mem_operand): Return VFP register for POST_INC or PRE_DEC
	for MVE.
	(output_move_neon): Add MVE check to generate vldm/vstm instrcutions.
	(arm_compute_frame_layout): Calculate space for saved VFP registers for
	MVE.
	(arm_save_coproc_regs): Save coproc registers for MVE.
	(arm_print_operand): Add case 'E' to print memory operands for MVE.
	(arm_print_operand_address): Check to print register number for MVE.
	(arm_hard_regno_mode_ok): Check for arm hard regno mode ok for MVE.
	(arm_modes_tieable_p): Check to allow structure mode for MVE.
	(arm_regno_class): Add VPR_REGNUM check.
	(arm_expand_epilogue_apcs_frame): MVE check to calculate epilogue code
	for APCS frame.
	(arm_expand_epilogue): MVE check for enabling pop instructions in
	epilogue.
	(arm_print_asm_arch_directives): Modify function to disable print of
	.arch_extension "mve" and "fp" for cases where MVE is enabled with
	"SOFT FLOAT ABI".
	(arm_vector_mode_supported_p): Check for modes available in MVE interger
	and MVE floating point.
	(arm_array_mode_supported_p): Add TARGET_HAVE_MVE check for array mode
	pointer support.
	(arm_conditional_register_usage): Enable usage of conditional regsiter
	for MVE.
	(fixed_regs[VPR_REGNUM]): Enable VPR_REG for MVE.
	(arm_declare_function_name): Modify function to disable print of
	.arch_extension "mve" and "fp" for cases where MVE is enabled with
	"SOFT FLOAT ABI".
	* config/arm/arm.h (TARGET_HAVE_MVE): Disable for soft float abi and
	when target general registers are required.
	(TARGET_HAVE_MVE_FLOAT): Likewise.
	(FIXED_REGISTERS): Add bit for VFP_REG class which is enabled in arm.c
	for MVE.
	(CALL_USED_REGISTERS): Set bit for VFP_REG class in CALL_USED_REGISTERS
	which indicate this is not available for across function calls.
	(FIRST_PSEUDO_REGISTER): Modify.
	(VALID_MVE_MODE): Define valid MVE mode.
	(VALID_MVE_SI_MODE): Define valid MVE SI mode.
	(VALID_MVE_SF_MODE): Define valid MVE SF mode.
	(VALID_MVE_STRUCT_MODE): Define valid MVE struct mode.
	(VPR_REGNUM): Add Vector Predication Register in arm_regs_in_sequence
	for MVE.
	(IS_VPR_REGNUM): Macro to check for VPR_REG register.
	(REG_ALLOC_ORDER): Add VPR_REGNUM entry.
	(enum reg_class): Add VPR_REG entry.
	(REG_CLASS_NAMES): Add VPR_REG entry.
	* config/arm/arm.md (VPR_REGNUM): Define.
	(conds): Check is_mve_type attrbiute to differentiate "conditional" and
	"unconditional" instructions.
	(arm_movsf_soft_insn): Modify RTL to not allow for MVE.
	(movdf_soft_insn): Modify RTL to not allow for MVE.
	(vfp_pop_multiple_with_writeback): Enable for MVE.
	(include "mve.md"): Include mve.md file.
	* config/arm/arm_mve.h: Add MVE intrinsics head file.
	* config/arm/constraints.md (Up): Constraint to enable "p0" register in MVE
	for vector predicated operands.
	* config/arm/iterators.md (VNIM1): Define.
	(VNINOTM1): Define.
	(VHFBF_split): Define
	* config/arm/mve.md: New file.
	(mve_mov<mode>): Define RTL for move, store and load in MVE.
	(mve_mov<mode>): Define move RTL pattern with vec_duplicate operator for
	second operand.
	* config/arm/neon.md (neon_immediate_valid_for_move): Rename with
	simd_immediate_valid_for_move.
	(neon_mov<mode>): Split pattern and move expand pattern "movv8hf" which
	is common to MVE and  NEON to vec-common.md file.
	(vec_init<mode><V_elem_l>): Add TARGET_HAVE_MVE check.
	* config/arm/predicates.md (vpr_register_operand): Define.
	* config/arm/t-arm: Add mve.md file.
	* config/arm/types.md (mve_move): Add MVE instructions mve_move to
	attribute "type".
	(mve_store): Add MVE instructions mve_store to attribute "type".
	(mve_load): Add MVE instructions mve_load to attribute "type".
	(is_mve_type): Define attribute.
	* config/arm/vec-common.md (mov<mode>): Modify RTL expand to support
	standard move patterns in MVE along with NEON and IWMMXT with mode
	iterator VNIM1.
	(mov<mode>): Modify RTL expand to support standard move patterns in NEON
	and IWMMXT with mode iterator V8HF.
	(movv8hf): Define RTL expand to support standard "movv8hf" pattern in
	NEON and MVE.
	* config/arm/vfp.md (neon_immediate_valid_for_move): Rename to
	simd_immediate_valid_for_move.


2020-03-16  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movsi_internal): Call ix86_output_ssemov
	for TYPE_SSEMOV.  Remove ext_sse_reg_operand and TARGET_AVX512VL
	check.
	* config/i386/predicates.md (ext_sse_reg_operand): Removed.

2020-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR debug/94167
	* tree-inline.c (insert_init_stmt): Don't gimple_regimplify_operands
	DEBUG_STMTs.

	PR tree-optimization/94166
	* tree-ssa-reassoc.c (sort_by_mach_mode): Use SSA_NAME_VERSION
	as secondary comparison key.

2020-03-16  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/94125
	* tree-loop-distribution.c
	(loop_distribution::break_alias_scc_partitions): Update post order
	number for merged scc.

2020-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.c (ix86_output_ssemov): Handle MODE_SI and
	MODE_SF.
	* config/i386/i386.md (*movsf_internal): Call ix86_output_ssemov
	for TYPE_SSEMOV.  Remove TARGET_PREFER_AVX256, TARGET_AVX512VL
	and ext_sse_reg_operand check.

2020-03-15  Lewis Hyatt  <lhyatt@gmail.com>

	* common.opt: Avoid redundancy in the help text.
	* config/arc/arc.opt: Likewise.
	* config/cr16/cr16.opt: Likewise.

2020-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/93566
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Handle {,in_,task_}reduction clauses
	with C/C++ array sections.

2020-03-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movdi_internal): Call ix86_output_ssemov
	for TYPE_SSEMOV.  Remove ext_sse_reg_operand and TARGET_AVX512VL
	check.

2020-03-14  Jakub Jelinek  <jakub@redhat.com>

	* gimple-fold.c (gimple_fold_builtin_strncpy): Change
	"a an" to "an" in a comment.
	* hsa-common.h (is_a_helper): Likewise.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Likewise.
	* config/arc/arc.c (arc600_corereg_hazard): Likewise.
	* config/s390/s390.c (s390_indirect_branch_via_thunk): Likewise.

2020-03-13  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/92379
	* config/rs6000/rs6000.c (num_insns_constant_multi): Don't shift a
	64-bit value by 64 bits (UB).

2020-03-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/92303
	* lra-spills.c (remove_pseudos): Try to simplify memory subreg.

2020-03-13  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/94148
	PR rtl-optimization/94042
	* df-core.c (BB_LAST_CHANGE_AGE): Delete.
	(df_worklist_propagate_forward): New parameter last_change_age, use
	that instead of bb->aux.
	(df_worklist_propagate_backward): Ditto.
	(df_worklist_dataflow_doublequeue): Use a local array last_change_age.

2020-03-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94163
	* tree-ssa-pre.c (create_expression_by_pieces): Check
	whether alignment would be zero.

2020-03-13  Martin Liska  <mliska@suse.cz>

	PR lto/94157
	* lto-wrapper.c (run_gcc): Use concat for appending
	to collect_gcc_options.

2020-03-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/94121
	* config/aarch64/aarch64.c (aarch64_add_offset_1): Use gen_int_mode
	instead of GEN_INT.

2020-03-13  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.c (ix86_output_ssemov): Handle MODE_DF.
	* config/i386/i386.md (*movdf_internal): Call ix86_output_ssemov
	for TYPE_SSEMOV.  Remove TARGET_AVX512F, TARGET_PREFER_AVX256,
	TARGET_AVX512VL and ext_sse_reg_operand check.

2020-03-13  Bu Le  <bule1@huawei.com>

	PR target/94154
	* config/aarch64/aarch64.opt (-param=aarch64-float-recp-precision=)
	(-param=aarch64-double-recp-precision=): New options.
	* doc/invoke.texi: Document them.
	* config/aarch64/aarch64.c (aarch64_emit_approx_div): Use them
	instead of hard-coding the choice of 1 for float and 2 for double.

2020-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/94119
	* resource.h (clear_hashed_info_until_next_barrier): Declare.
	* resource.c (clear_hashed_info_until_next_barrier): New function.
	* reorg.c (add_to_delay_list): Fix formatting.
	(relax_delay_slots): Call clear_hashed_info_until_next_barrier on
	the next instruction after removing a BARRIER.

2020-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/92071
	* expmed.c (store_integral_bit_field): For fields larger than a word,
	call extract_bit_field on the value if the mode is BLKmode.  Remove
	specific path for big-endian targets and tidy things up a little bit.

2020-03-12  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/90275
	* cse.c (cse_insn): Delete no-op register moves too.

2020-03-12  Darius Galis  <darius.galis@cyberthorstudios.com>

	* config/rx/rx.md (CTRLREG_CPEN): Remove.
	* config/rx/rx.c (rx_print_operand): Remove CTRLREG_CPEN support.

2020-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/94103
	* tree-ssa-sccvn.c (visit_reference_op_load): Avoid type
	punning when the mode precision is not sufficient.

2020-03-12  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.c (ix86_output_ssemov): Handle MODE_DI,
	MODE_V1DF and MODE_V2SF.
	* config/i386/mmx.md (MMXMODE:*mov<mode>_internal): Call
	ix86_output_ssemov for TYPE_SSEMOV.  Remove ext_sse_reg_operand
	check.

2020-03-12  Jakub Jelinek  <jakub@redhat.com>

	* doc/tm.texi.in (ASM_OUTPUT_ALIGNED_DECL_LOCAL): Change
	ASM_OUTPUT_ALIGNED_DECL in description to ASM_OUTPUT_ALIGNED_LOCAL
	and ASM_OUTPUT_DECL to ASM_OUTPUT_LOCAL.
	* doc/tm.texi: Regenerated.

	PR tree-optimization/94130
	* tree-ssa-dse.c: Include gimplify.h.
	(increment_start_addr): If stmt has lhs, drop the lhs from call and
	set it after the call to the original value of the first argument.
	Formatting fixes.
	(decrement_count): Formatting fix.

2020-03-11  Delia Burduv  <delia.burduv@arm.com>

	* config/arm/arm-builtins.c
	(arm_init_simd_builtin_scalar_types): New.
	* config/arm/arm_neon.h (vld2_bf16): Used new builtin type.
	(vld2q_bf16): Used new builtin type.
	(vld3_bf16): Used new builtin type.
	(vld3q_bf16): Used new builtin type.
	(vld4_bf16): Used new builtin type.
	(vld4q_bf16): Used new builtin type.
	(vld2_dup_bf16): Used new builtin type.
	(vld2q_dup_bf16): Used new builtin type.
	(vld3_dup_bf16): Used new builtin type.
	(vld3q_dup_bf16): Used new builtin type.
	(vld4_dup_bf16): Used new builtin type.
	(vld4q_dup_bf16): Used new builtin type.

2020-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/94134
	* config/pdp11/pdp11.c (pdp11_asm_output_var): Call switch_to_section
	at the start to switch to data section.  Don't print extra newline if
	.globl directive has not been emitted.

2020-03-11  Richard Biener  <rguenther@suse.de>

	* match.pd ((T *)(ptr - ptr-cst) -> &MEM[ptr + -ptr-cst]):
	New pattern.

2020-03-11  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/93961
	* tree.c (variably_modified_type_p) <RECORD_TYPE>: Recurse into fields
	whose type is a qualified union.

2020-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/94121
	* config/aarch64/aarch64.c (aarch64_add_offset_1): Use absu_hwi
	instead of abs_hwi, change moffset type to unsigned HOST_WIDE_INT.

	PR bootstrap/93962
	* value-prof.c (dump_histogram_value): Use abs_hwi instead of
	std::abs.
	(get_nth_most_common_value): Use abs_hwi instead of abs.

	PR middle-end/94111
	* dfp.c (decimal_to_binary): Only use decimal128ToString if from->cl
	is rvc_normal, otherwise use real_to_decimal to print the number to
	string.

	PR tree-optimization/94114
	* tree-loop-distribution.c (generate_memset_builtin): Call
	rewrite_to_non_trapping_overflow even on mem.
	(generate_memcpy_builtin): Call rewrite_to_non_trapping_overflow even
	on dest and src.

2020-03-10  Jeff Law  <law@redhat.com>

	* config/bfin/bfin.md (movsi_insv): Add length attribute.

2020-03-10  Jiufu Guo  <guojiufu@linux.ibm.com>

	PR target/93709
	* config/rs6000/rs6000.c (rs6000_emit_p9_fp_minmax): Check
	NAN and SIGNED_ZEROR for smax/smin.

2020-03-10  Will Schmidt  <will_schmidt@vnet.ibm.com>

	PR target/90763
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Add
	clause to handle P9V_BUILTIN_VEC_LXVL with const arguments.

2020-03-10  Roman Zhuykov  <zhroma@ispras.ru>

	* loop-iv.c (find_simple_exit): Make it static.
	* cfgloop.h: Remove the corresponding prototype.

2020-03-10  Roman Zhuykov  <zhroma@ispras.ru>

	* ddg.c (create_ddg): Fix intendation.
	(set_recurrence_length): Likewise.
	(create_ddg_all_sccs): Likewise.

2020-03-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/94088
	* config/i386/i386.md (*testqi_ext_3): Call ix86_match_ccmode with
	CCZmode instead of CCNOmode if operands[2] has DImode and pos + len
	is 32.

2020-03-09  Jason Merrill  <jason@redhat.com>

	* gdbinit.in (pgs): Fix typo in documentation.

2020-03-09  Vladimir Makarov  <vmakarov@redhat.com>

	Revert:

	2020-02-28  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/93564
	* ira-color.c (assign_hard_reg): Prefer smaller hard regno when we
	do not honor reg alloc order.

2020-03-09  Andrew Pinski  <apinski@marvell.com>

	PR inline-asm/94095
	* doc/extend.texi (x86 Operand Modifiers): Fix column
	for 'A' modifier.

2020-03-09  Martin Liska  <mliska@suse.cz>

	PR target/93800
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Remove set of str_align_loops and str_align_jumps as these
	should be set in previous 2 conditions in the function.

2020-03-09  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/94045
	* params.opt (-param=max-find-base-term-values=): New option.
	* alias.c (find_base_term): Add cut-off for number of visited VALUEs
	in a single toplevel find_base_term call.

2020-03-06  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/91598
	* config/aarch64/aarch64-builtins.c (TYPES_TERNOPU_LANE): Add define.
	* config/aarch64/aarch64-simd.md
	(aarch64_vec_<su>mult_lane<Qlane>): Add new insn for widening lane mul.
	(aarch64_vec_<su>mlal_lane<Qlane>): Likewise.
	* config/aarch64/aarch64-simd-builtins.def: Add intrinsics.
	* config/aarch64/arm_neon.h:
	(vmlal_lane_s16): Expand using intrinsics rather than inline asm.
	(vmlal_lane_u16): Likewise.
	(vmlal_lane_s32): Likewise.
	(vmlal_lane_u32): Likewise.
	(vmlal_laneq_s16): Likewise.
	(vmlal_laneq_u16): Likewise.
	(vmlal_laneq_s32): Likewise.
	(vmlal_laneq_u32): Likewise.
	(vmull_lane_s16): Likewise.
	(vmull_lane_u16): Likewise.
	(vmull_lane_s32): Likewise.
	(vmull_lane_u32): Likewise.
	(vmull_laneq_s16): Likewise.
	(vmull_laneq_u16): Likewise.
	(vmull_laneq_s32): Likewise.
	(vmull_laneq_u32): Likewise.
	* config/aarch64/iterators.md (Vcondtype): New iterator for lane mul.
	(Qlane): Likewise.

2020-03-06  Wilco Dijkstra  <wdijkstr@arm.com>

	* aarch64/aarch64-simd.md (aarch64_mla_elt<mode>): Correct lane syntax.
	(aarch64_mla_elt_<vswap_width_name><mode>): Likewise.
	(aarch64_mls_elt<mode>): Likewise.
	(aarch64_mls_elt_<vswap_width_name><mode>): Likewise.
	(aarch64_fma4_elt<mode>): Likewise.
	(aarch64_fma4_elt_<vswap_width_name><mode>): Likewise.
	(aarch64_fma4_elt_to_64v2df): Likewise.
	(aarch64_fnma4_elt<mode>): Likewise.
	(aarch64_fnma4_elt_<vswap_width_name><mode>): Likewise.
	(aarch64_fnma4_elt_to_64v2df): Likewise.

2020-03-06  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-sve2.md (@aarch64_sve_<sve_int_op><mode>:
	Specify movprfx attribute.
	(@aarch64_sve_<sve_int_op>_lane_<mode>): Likewise.

2020-03-06  David Edelsohn  <dje.gcc@gmail.com>

	PR target/94065
	* config/rs6000/aix61.h (TARGET_NO_SUM_IN_TOC): Set to 1 for
	cmodel=large.
	(TARGET_NO_FP_IN_TOC): Same.
	* config/rs6000/aix71.h: Same.
	* config/rs6000/aix72.h: Same.

2020-03-06  Andrew Pinski  <apinski@marvell.com>
	    Jeff Law  <law@redhat.com>

	PR rtl-optimization/93996
	* haifa-sched.c (remove_notes): Be more careful when adding
	REG_SAVE_NOTE.

2020-03-06  Delia Burduv  <delia.burduv@arm.com>

	* config/arm/arm_neon.h (vld2_bf16): New.
	(vld2q_bf16): New.
	(vld3_bf16): New.
	(vld3q_bf16): New.
	(vld4_bf16): New.
	(vld4q_bf16): New.
	(vld2_dup_bf16): New.
	(vld2q_dup_bf16): New.
	(vld3_dup_bf16): New.
	(vld3q_dup_bf16): New.
	(vld4_dup_bf16): New.
	(vld4q_dup_bf16): New.
	* config/arm/arm_neon_builtins.def
	(vld2): Changed to VAR13 and added v4bf, v8bf
	(vld2_dup): Changed to VAR8 and added v4bf, v8bf
	(vld3): Changed to VAR13 and added v4bf, v8bf
	(vld3_dup): Changed to VAR8 and added v4bf, v8bf
	(vld4): Changed to VAR13 and added v4bf, v8bf
	(vld4_dup): Changed to VAR8 and added v4bf, v8bf
	* config/arm/iterators.md (VDXBF2): New iterator.
	*config/arm/neon.md (neon_vld2): Use new iterators.
	(neon_vld2_dup<mode): Use new iterators.
	(neon_vld3<mode>): Likewise.
	(neon_vld3qa<mode>): Likewise.
	(neon_vld3qb<mode>): Likewise.
	(neon_vld3_dup<mode>): Likewise.
	(neon_vld4<mode>): Likewise.
	(neon_vld4qa<mode>): Likewise.
	(neon_vld4qb<mode>): Likewise.
	(neon_vld4_dup<mode>): Likewise.
	(neon_vld2_dupv8bf): New.
	(neon_vld3_dupv8bf): Likewise.
	(neon_vld4_dupv8bf): Likewise.

2020-03-06  Delia Burduv  <delia.burduv@arm.com>

	* config/arm/arm_neon.h (bfloat16x4x2_t): New typedef.
	(bfloat16x8x2_t): New typedef.
	(bfloat16x4x3_t): New typedef.
	(bfloat16x8x3_t): New typedef.
	(bfloat16x4x4_t): New typedef.
	(bfloat16x8x4_t): New typedef.
	(vst2_bf16): New.
	(vst2q_bf16): New.
	(vst3_bf16): New.
	(vst3q_bf16): New.
	(vst4_bf16): New.
	(vst4q_bf16): New.
	* config/arm/arm-builtins.c (v2bf_UP): Define.
	(VAR13): New.
	(arm_init_simd_builtin_types): Init Bfloat16x2_t eltype.
	* config/arm/arm-modes.def (V2BF): New mode.
	* config/arm/arm-simd-builtin-types.def
	(Bfloat16x2_t): New entry.
	* config/arm/arm_neon_builtins.def
	(vst2): Changed to VAR13 and added v4bf, v8bf
	(vst3): Changed to VAR13 and added v4bf, v8bf
	(vst4): Changed to VAR13 and added v4bf, v8bf
	* config/arm/iterators.md (VDXBF): New iterator.
	(VQ2BF): New iterator.
	*config/arm/neon.md (neon_vst2<mode>): Used new iterators.
	(neon_vst2<mode>): Used new iterators.
	(neon_vst3<mode>): Used new iterators.
	(neon_vst3<mode>): Used new iterators.
	(neon_vst3qa<mode>): Used new iterators.
	(neon_vst3qb<mode>): Used new iterators.
	(neon_vst4<mode>): Used new iterators.
	(neon_vst4<mode>): Used new iterators.
	(neon_vst4qa<mode>): Used new iterators.
	(neon_vst4qb<mode>): Used new iterators.

2020-03-06  Delia Burduv  <delia.burduv@arm.com>

	* config/aarch64/aarch64-simd-builtins.def
	(bfcvtn): New built-in function.
	(bfcvtn_q): New built-in function.
	(bfcvtn2): New built-in function.
	(bfcvt): New built-in function.
	* config/aarch64/aarch64-simd.md
	(aarch64_bfcvtn<q><mode>): New pattern.
	(aarch64_bfcvtn2v8bf): New pattern.
	(aarch64_bfcvtbf): New pattern.
	* config/aarch64/arm_bf16.h (float32_t): New typedef.
	(vcvth_bf16_f32): New intrinsic.
	* config/aarch64/arm_bf16.h (vcvt_bf16_f32): New intrinsic.
	(vcvtq_low_bf16_f32): New intrinsic.
	(vcvtq_high_bf16_f32): New intrinsic.
	* config/aarch64/iterators.md (V4SF_TO_BF): New mode iterator.
	(UNSPEC_BFCVTN): New UNSPEC.
	(UNSPEC_BFCVTN2): New UNSPEC.
	(UNSPEC_BFCVT): New UNSPEC.
	* config/arm/types.md (bf_cvt): New type.

2020-03-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("tabort"): Get rid of two consecutive
	blanks in format string.

2020-03-05  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	PR target/89346
	* config/i386/i386-protos.h (ix86_output_ssemov): New prototype.
	* config/i386/i386.c (ix86_get_ssemov): New function.
	(ix86_output_ssemov): Likewise.
	* config/i386/sse.md (VMOVE:mov<mode>_internal): Call
	ix86_output_ssemov for TYPE_SSEMOV.  Remove TARGET_AVX512VL
	check.
	(*movxi_internal_avx512f): Call ix86_output_ssemov for TYPE_SSEMOV.
	(*movoi_internal_avx): Call ix86_output_ssemov for TYPE_SSEMOV.
	Remove ext_sse_reg_operand and TARGET_AVX512VL check.
	(*movti_internal): Likewise.
	(*movtf_internal): Call ix86_output_ssemov for TYPE_SSEMOV.

2020-03-05  Jeff Law  <law@redhat.com>

	PR tree-optimization/91890
	* gimple-ssa-warn-restrict.c (maybe_diag_overlap): Remove LOC argument.
	Use gimple_or_expr_nonartificial_location.
	(check_bounds_overlap): Drop LOC argument to maybe_diag_access_bounds.
	Use gimple_or_expr_nonartificial_location.
	* gimple.c (gimple_or_expr_nonartificial_location): New function.
	* gimple.h (gimple_or_expr_nonartificial_location): Declare it.
	* tree-ssa-strlen.c (maybe_warn_overflow): Use
	gimple_or_expr_nonartificial_location.
	(maybe_diag_stxncpy_trunc, handle_builtin_stxncpy_strncat): Likewise.
	(maybe_warn_pointless_strcmp): Likewise.

2020-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/94046
	* config/i386/avx2intrin.h (_mm_mask_i32gather_ps): Fix first cast of
	SRC and MASK arguments to __m128 from __m128d.
	(_mm256_mask_i32gather_ps): Fix first cast of MASK argument to __m256
	from __m256d.
	(_mm_mask_i64gather_ps): Fix first cast of MASK argument to __m128
	from __m128d.
	* config/i386/xopintrin.h (_mm_permute2_pd): Fix first cast of C
	argument to __m128i from __m128d.
	(_mm256_permute2_pd): Fix first cast of C argument to __m256i from
	__m256d.
	(_mm_permute2_ps): Fix first cast of C argument to __m128i from __m128.
	(_mm256_permute2_ps): Fix first cast of C argument to __m256i from
	__m256.

2020-03-05  Delia Burduv  <delia.burduv@arm.com>

	* config/arm/arm_neon.h (vbfmmlaq_f32): New.
	(vbfmlalbq_f32): New.
	(vbfmlaltq_f32): New.
	(vbfmlalbq_lane_f32): New.
	(vbfmlaltq_lane_f32): New.
	(vbfmlalbq_laneq_f32): New.
	(vbfmlaltq_laneq_f32): New.
	* config/arm/arm_neon_builtins.def (vmmla): New.
	(vfmab): New.
	(vfmat): New.
	(vfmab_lane): New.
	(vfmat_lane): New.
	(vfmab_laneq): New.
	(vfmat_laneq): New.
	* config/arm/iterators.md (BF_MA): New int iterator.
	(bt): New int attribute.
	(VQXBF): Copy of VQX with V8BF.
	* config/arm/neon.md (neon_vmmlav8bf): New insn.
	(neon_vfma<bt>v8bf): New insn.
	(neon_vfma<bt>_lanev8bf): New insn.
	(neon_vfma<bt>_laneqv8bf): New expand.
	(neon_vget_high<mode>): Changed iterator to VQXBF.
	* config/arm/unspecs.md (UNSPEC_BFMMLA): New UNSPEC.
	(UNSPEC_BFMAB): New UNSPEC.
	(UNSPEC_BFMAT): New UNSPEC.

2020-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/93399
	* tree-pretty-print.h (pretty_print_string): Declare.
	* tree-pretty-print.c (pretty_print_string): Remove forward
	declaration, no longer static.  Change nbytes parameter type
	from unsigned to size_t.
	* print-rtl.c (print_value) <case CONST_STRING>: Use
	pretty_print_string and for shrink way too long strings.

2020-03-05  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93582
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Treat POINTER_PLUS_EXPR
	last operand as signed when looking for memset offset.  Formatting
	fix.

2020-03-04  Andrew Pinski  <apinski@marvell.com>

	PR bootstrap/93962
	* value-prof.c (dump_histogram_value): Use std::abs.

2020-03-04  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/93986
	* tree-ssa-strlen.c (maybe_warn_overflow): Convert all wide_int
	operands to the same precision widest_int to avoid ICEs.

2020-03-04  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/87560
	* rs6000-cpus.def (OTHER_ALTIVEC_MASKS): New #define.
	* rs6000.c (rs6000_disable_incompatible_switches): Add table entry
	for OPTION_MASK_ALTIVEC.

2020-03-04  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config.gcc: Include the glibc-stdint.h header for zTPF.

2020-03-04  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_secondary_memory_needed): Disallow
	direct FPR-GPR copies.
	(s390_register_info_gprtofpr): Disallow GPR content to be saved in
	FPRs.

2020-03-04  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_emit_prologue): Specify the 2 new
	operands to the prologue_tpf expander.
	(s390_emit_epilogue): Likewise.
	(s390_option_override_internal): Do error checking and setup for
	the new options.
	* config/s390/tpf.h (TPF_TRACE_PROLOGUE_CHECK)
	(TPF_TRACE_EPILOGUE_CHECK, TPF_TRACE_PROLOGUE_TARGET)
	(TPF_TRACE_EPILOGUE_TARGET, TPF_TRACE_PROLOGUE_SKIP_TARGET)
	(TPF_TRACE_EPILOGUE_SKIP_TARGET): New macro definitions.
	* config/s390/tpf.md ("prologue_tpf", "epilogue_tpf"): Add two new
	operands for the check flag and the branch target.
	* config/s390/tpf.opt ("mtpf-trace-hook-prologue-check")
	("mtpf-trace-hook-prologue-target")
	("mtpf-trace-hook-epilogue-check")
	("mtpf-trace-hook-epilogue-target", "mtpf-trace-skip"): New
	options.
	* doc/invoke.texi: Document -mtpf-trace-skip option. The other
	options are for debugging purposes and will not be documented
	here.

2020-03-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/93888
	* tree-inline.c (copy_decl_to_var): Copy DECL_BY_REFERENCE flag.

	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Add offseti
	argument.  Change pd argument so that it can be modified.  Turn
	constant non-CONSTRUCTOR store into non-constant if it is too large.
	Adjust offset and size of CONSTRUCTOR or non-constant store to avoid
	overflows.
	(vn_walk_cb_data::vn_walk_cb_data, vn_reference_lookup_3): Adjust
	callers.

2020-02-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93964
	* graphite-isl-ast-to-gimple.c
	(gcc_expression_from_isl_ast_expr_id): Add intermediate
	conversion for pointer to integer converts.
	* graphite-scop-detection.c (assign_parameter_index_in_region):
	Relax assert.

2020-03-04  Martin Liska  <mliska@suse.cz>

	PR c/93886
	PR c/93887
	* doc/invoke.texi: Clarify --help=language and --help=common
	interaction.

2020-03-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/94001
	* tree-tailcall.c (process_assignment): Before comparing op1 to
	*ass_var, verify *ass_var is non-NULL.

2020-03-04  Kito Cheng  <kito.cheng@sifive.com>

	PR target/93995
	* config/riscv/riscv.c (riscv_emit_float_compare): Using NE to compare
	the result of IOR.

2020-03-03  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm_bf16.h (vcvtah_f32_bf16, vcvth_bf16_f32): New.
	* config/arm/arm_neon.h (vcvt_f32_bf16, vcvtq_low_f32_bf16): New.
	(vcvtq_high_f32_bf16, vcvt_bf16_f32): New.
	(vcvtq_low_bf16_f32, vcvtq_high_bf16_f32): New.
	* config/arm/arm_neon_builtins.def (vbfcvt, vbfcvt_high): New entries.
	(vbfcvtv4sf, vbfcvtv4sf_high): Likewise.
	* config/arm/iterators.md (VBFCVT, VBFCVTM): New mode iterators.
	(V_bf_low, V_bf_cvt_m): New mode attributes.
	* config/arm/neon.md (neon_vbfcvtv4sf<VBFCVT:mode>): New.
	(neon_vbfcvtv4sf_highv8bf, neon_vbfcvtsf): New.
	(neon_vbfcvt<VBFCVT:mode>, neon_vbfcvt_highv8bf): New.
	(neon_vbfcvtbf_cvtmode<mode>, neon_vbfcvtbf): New
	* config/arm/unspecs.md (UNSPEC_BFCVT, UNSPEC_BFCVT_HIG): New.

2020-03-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93582
	* tree-ssa-sccvn.h (vn_reference_lookup): Add mask argument.
	* tree-ssa-sccvn.c (struct vn_walk_cb_data): Add mask and masked_result
	members, initialize them in the constructor and if mask is non-NULL,
	artificially push_partial_def {} for the portions of the mask that
	contain zeros.
	(vn_walk_cb_data::finish): If mask is non-NULL, set masked_result to
	val and return (void *)-1.  Formatting fix.
	(vn_reference_lookup_pieces): Adjust vn_walk_cb_data initialization.
	Formatting fix.
	(vn_reference_lookup): Add mask argument.  If non-NULL, don't call
	fully_constant_vn_reference_p nor vn_reference_lookup_1 and return
	data.mask_result.
	(visit_nary_op): Handle BIT_AND_EXPR of a memory load and INTEGER_CST
	mask.
	(visit_stmt): Formatting fix.

2020-03-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93946
	* alias.h (refs_same_for_tbaa_p): Declare.
	* alias.c (refs_same_for_tbaa_p): New function.
	* tree-ssa-alias.c (ao_ref_alias_set): For a NULL ref return
	zero.
	* tree-ssa-scopedtables.h
	(avail_exprs_stack::lookup_avail_expr): Add output argument
	giving access to the hashtable entry.
	* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr):
	Likewise.
	* tree-ssa-dom.c: Include alias.h.
	(dom_opt_dom_walker::optimize_stmt): Validate TBAA state before
	removing redundant store.
	* tree-ssa-sccvn.h (vn_reference_s::base_set): New member.
	(ao_ref_init_from_vn_reference): Adjust prototype.
	(vn_reference_lookup_pieces): Likewise.
	(vn_reference_insert_pieces): Likewise.
	* tree-ssa-sccvn.c: Track base alias set in addition to alias
	set everywhere.
	(eliminate_dom_walker::eliminate_stmt): Also check base alias
	set when removing redundant stores.
	(visit_reference_op_store): Likewise.
	* dse.c (record_store): Adjust valdity check for redundant
	store removal.

2020-03-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/26877
	* config/s390/s390.h (OPTION_DEFAULT_SPECS): Reorder.

	PR rtl-optimization/94002
	* explow.c (plus_constant): Punt if cst has VOIDmode and
	get_pool_mode is different from mode.

2020-03-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (leigitimate_small_data_address_p): Check if an
	address has an offset which fits the scalling constraint for a
	load/store operation.
	(legitimate_scaled_address_p): Update use
	leigitimate_small_data_address_p.
	(arc_print_operand): Likewise.
	(arc_legitimate_address_p): Likewise.
	(legitimate_small_data_address_p): Likewise.

2020-03-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (fmasf4_fpu): Use accl_operand predicate.
	(fnmasf4_fpu): Likewise.

2020-03-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (adddi3): Early expand the 64bit operation into
	32bit ops.
	(subdi3): Likewise.
	(adddi3_i): Remove pattern.
	(subdi3_i): Likewise.

2020-03-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (eh_return): Add length info.

2020-03-02  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fanalyzer-show-duplicate-count): New.

2020-03-02  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (Static Analyzer Options): Add
	-Wanalyzer-stale-setjmp-buffer to the list of options enabled
	by -fanalyzer.

2020-03-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/93997
	* config/i386/i386.md (movstrict<mode>): Allow only
	registers with VALID_INT_MODE_P modes.

2020-03-02  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (dpp_move<mode>): New.
	(reduc_insn): Use 'U' and 'B' operand codes.
	(reduc_<reduc_op>_scal_<mode>): Allow all types.
	(reduc_<reduc_op>_scal_v64di): Delete.
	(*<reduc_op>_dpp_shr_<mode>): Allow all 1reg types.
	(*plus_carry_dpp_shr_v64si): Change to ...
	(*plus_carry_dpp_shr_<mode>): ... this and allow all 1reg int types.
	(mov_from_lane63_v64di): Change to ...
	(mov_from_lane63_<mode>): ... this, and allow all 64-bit modes.
	* config/gcn/gcn.c (gcn_expand_dpp_shr_insn): Increase buffer size.
	Support UNSPEC_MOV_DPP_SHR output formats.
	(gcn_expand_reduc_scalar): Add "use_moves" reductions.
	Add "use_extends" reductions.
	(print_operand_address): Add 'I' and 'U' codes.
	* config/gcn/gcn.md (unspec): Add UNSPEC_MOV_DPP_SHR.

2020-03-02  Martin Liska  <mliska@suse.cz>

	* lto-wrapper.c: Fix typo in comment about
	C++ standard version.

2020-03-01  Martin Sebor  <msebor@redhat.com>

	PR c++/92721
	* calls.c (init_attr_rdwr_indices): Correctly handle attribute.

2020-03-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/93829
	* tree-ssa-strlen.c (count_nonzero_bytes): Set the size to that
	  of a pointer in the outermost ADDR_EXPRs.

2020-02-28  Jeff Law  <law@redhat.com>

	* config/v850/v850.h (STATIC_CHAIN_REGNUM): Change to r19.
	* config/v850/v850.c (v850_asm_trampoline_template): Update
	accordingly.

2020-02-28  Michael Meissner  <meissner@linux.ibm.com>

	PR target/93937
	* config/rs6000/vsx.md (vsx_extract_<mode>_<VS_scalar>mode_var):
	Delete insn.

2020-02-28  Martin Liska  <mliska@suse.cz>

	PR other/93965
	* configure.ac: Improve detection of ld_date by requiring
	either two dashes or none.
	* configure: Regenerate.

2020-02-28  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/93564
	* ira-color.c (assign_hard_reg): Prefer smaller hard regno when we
	do not honor reg alloc order.

2020-02-27  Joel Hutton  <Joel.Hutton@arm.com>

	PR target/87612
	* config/aarch64/aarch64.c (aarch64_override_options): Fix
	misleading warning string.

2020-02-27  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wbuiltin-declaration-mismatch): Fix a typo.

2020-02-27  Michael Meissner  <meissner@linux.ibm.com>

	PR target/93932
	* config/rs6000/vsx.md (vsx_extract_<mode>_var, VSX_D iterator):
	Split the insn into two parts.  This insn only does variable
	extract from a register.
	(vsx_extract_<mode>_var_load, VSX_D iterator): New insn, do
	variable extract from memory.
	(vsx_extract_v4sf_var): Split the insn into two parts.  This insn
	only does variable extract from a register.
	(vsx_extract_v4sf_var_load): New insn, do variable extract from
	memory.
	(vsx_extract_<mode>_var, VSX_EXTRACT_I iterator): Split the insn
	into two parts.  This insn only does variable extract from a
	register.
	(vsx_extract_<mode>_var_load, VSX_EXTRACT_I iterator): New insn,
	do variable extract from memory.

2020-02-27  Martin Jambor  <mjambor@suse.cz>
	    Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93707
	* ipa-cp.c (same_node_or_its_all_contexts_clone_p): Replaced with
	new function calls_same_node_or_its_all_contexts_clone_p.
	(cgraph_edge_brings_value_p): Use it.
	(cgraph_edge_brings_value_p): Likewise.
	(self_recursive_pass_through_p): Return false if caller is a clone.
	(self_recursive_agg_pass_through_p): Likewise.

2020-02-27  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/92152
	* alias.c (ends_tbaa_access_path_p): Break out from ...
	(component_uses_parent_alias_set_from): ... here.
	* alias.h (ends_tbaa_access_path_p): Declare.
	* tree-ssa-alias.c (access_path_may_continue_p): Break out from ...;
	handle trailing arrays past end of tbaa access path.
	(aliasing_component_refs_p): ... here; likewise.
	(nonoverlapping_refs_since_match_p): Track TBAA segment of the access
	path; disambiguate also past end of it.
	(nonoverlapping_component_refs_p): Use only TBAA segment of the access
	path.

2020-02-27  Mihail Ionescu  <mihail.ionescu@arm.com>

	* (__ARM_NUM_LANES, __arm_lane, __arm_lane_q): Move to the
	beginning of the file.
	(vcreate_bf16, vcombine_bf16): New.
	(vdup_n_bf16, vdupq_n_bf16): New.
	(vdup_lane_bf16, vdup_laneq_bf16): New.
	(vdupq_lane_bf16, vdupq_laneq_bf16): New.
	(vduph_lane_bf16, vduph_laneq_bf16): New.
	(vset_lane_bf16, vsetq_lane_bf16): New.
	(vget_lane_bf16, vgetq_lane_bf16): New.
	(vget_high_bf16, vget_low_bf16): New.
	(vreinterpret_bf16_u8, vreinterpretq_bf16_u8): New.
	(vreinterpret_bf16_u16, vreinterpretq_bf16_u16): New.
	(vreinterpret_bf16_u32, vreinterpretq_bf16_u32): New.
	(vreinterpret_bf16_u64, vreinterpretq_bf16_u64): New.
	(vreinterpret_bf16_s8, vreinterpretq_bf16_s8): New.
	(vreinterpret_bf16_s16, vreinterpretq_bf16_s16): New.
	(vreinterpret_bf16_s32, vreinterpretq_bf16_s32): New.
	(vreinterpret_bf16_s64, vreinterpretq_bf16_s64): New.
	(vreinterpret_bf16_p8, vreinterpretq_bf16_p8): New.
	(vreinterpret_bf16_p16, vreinterpretq_bf16_p16): New.
	(vreinterpret_bf16_p64, vreinterpretq_bf16_p64): New.
	(vreinterpret_bf16_f32, vreinterpretq_bf16_f32): New.
	(vreinterpret_bf16_f64, vreinterpretq_bf16_f64): New.
	(vreinterpretq_bf16_p128): New.
	(vreinterpret_s8_bf16, vreinterpretq_s8_bf16): New.
	(vreinterpret_s16_bf16, vreinterpretq_s16_bf16): New.
	(vreinterpret_s32_bf16, vreinterpretq_s32_bf16): New.
	(vreinterpret_s64_bf16, vreinterpretq_s64_bf16): New.
	(vreinterpret_u8_bf16, vreinterpretq_u8_bf16): New.
	(vreinterpret_u16_bf16, vreinterpretq_u16_bf16): New.
	(vreinterpret_u32_bf16, vreinterpretq_u32_bf16): New.
	(vreinterpret_u64_bf16, vreinterpretq_u64_bf16): New.
	(vreinterpret_p8_bf16, vreinterpretq_p8_bf16): New.
	(vreinterpret_p16_bf16, vreinterpretq_p16_bf16): New.
	(vreinterpret_p64_bf16, vreinterpretq_p64_bf16): New.
	(vreinterpret_f32_bf16, vreinterpretq_f32_bf16): New.
	(vreinterpretq_p128_bf16): New.
	* config/arm/arm_neon_builtins.def (VDX): Add V4BF.
	(V_elem): Likewise.
	(V_elem_l): Likewise.
	(VD_LANE): Likewise.
	(VQX) Add V8BF.
	(V_DOUBLE): Likewise.
	(VDQX): Add V4BF and V8BF.
	(V_two_elem, V_three_elem, V_four_elem): Likewise.
	(V_reg): Likewise.
	(V_HALF): Likewise.
	(V_double_vector_mode): Likewise.
	(V_cmp_result): Likewise.
	(V_uf_sclr): Likewise.
	(V_sz_elem): Likewise.
	(Is_d_reg): Likewise.
	(V_mode_nunits): Likewise.
	* config/arm/neon.md (neon_vdup_lane): Enable for BFloat16.

2020-02-27  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (VEC_SUBDWORD_MODE): New mode iterator.
	(<expander><mode>2<exec>): Change modes to VEC_ALL1REG_INT_MODE.
	(<expander><mode>3<exec>): Likewise.
	(<expander><mode>3): New.
	(v<expander><mode>3): New.
	(<expander><mode>3): New.
	(<expander><mode>3<exec>): Rename to ...
	(<expander>v64si3<exec>): ... this, and change modes to V64SI.
	* config/gcn/gcn.md (mnemonic): Use '%B' for not.

2020-02-27  Alexandre Oliva <oliva@adacore.com>

	* config/vx-common.h (NO_DOLLAR_IN_LABEL, NO_DOT_IN_LABEL): Leave
	them alone on vx7.

2020-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93508
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle _CHK like
	non-_CHK variants.  Valueize their length arguments.

2020-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93953
	* tree-vect-slp.c (slp_copy_subtree): Avoid keeping a reference
	to the hash-map entry.

2020-02-27  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (mov<mode>): Add transformations for BI subregs.

2020-02-27  Mark Williams  <mwilliams@fb.com>

	* dwarf2out.c (file_name_acquire): Call remap_debug_filename.
	* lto-opts.c (lto_write_options): Drop -fdebug-prefix-map,
	-ffile-prefix-map and -fmacro-prefix-map.
	* lto-streamer-out.c: Include file-prefix-map.h.
	(lto_output_location): Remap the file part of locations.

2020-02-27  Jakub Jelinek  <jakub@redhat.com>

	PR c/93949
	* gimplify.c (gimplify_init_constructor): Don't promote readonly
	DECL_REGISTER variables to TREE_STATIC.

	PR tree-optimization/93582
	PR tree-optimization/93945
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle memset with
	non-zero INTEGER_CST second argument and ref->offset or ref->size
	not a multiple of BITS_PER_UNIT.

2020-02-27  Jonathan Wakely  <jwakely@redhat.com>

	* doc/install.texi (Binaries): Update description of BullFreeware.

2020-02-26  Sandra Loosemore  <sandra@codesourcery.com>

	PR c++/90467

	* doc/invoke.texi (Option Summary): Re-alphabetize warnings in
	C++ Language Options, Warning Options, and Static Analyzer
	Options lists.  Document negative form of options enabled by
	default.  Move some things around to more accurately sort
	warnings by category.
	(C++ Dialect Options, Warning Options, Static Analyzer
	Options): Document negative form of options when enabled by
	default.  Move some things around to more accurately sort
	warnings by category.  Add some missing index entries.
	Light copy-editing.

2020-02-26  Carl Love  <cel@us.ibm.com>

	PR target/91276
	* doc/extend.texi (PowerPC AltiVec Built-in Functions available on
	ISA 2.07): The builtin-function name __builtin_crypto_vpmsumb is only
	for the vector unsigned short arguments.  It is also listed as the
	name of the built-in for arguments vector unsigned short,
	vector unsigned int and vector unsigned long long built-ins.  The
	name of the builtins for these arguments should be:
	__builtin_crypto_vpmsumh, __builtin_crypto_vpmsumw and
	__builtin_crypto_vpmsumd respectively.

2020-02-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_print_slp_tree): Also dump ref count
	and load permutation.

2020-02-26  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/93843
	* optabs-tree.c (supportable_convert_operation): Reject types with
	scalar modes.

2020-02-26  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (ANALYZER_OBJS): Add analyzer/bar-chart.o.

2020-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93820
	* gimple-ssa-store-merging.c (check_no_overlap): Change RHS_CODE
	argument to ALL_INTEGER_CST_P boolean.
	(imm_store_chain_info::try_coalesce_bswap): Adjust caller.
	(imm_store_chain_info::coalesce_immediate_stores): Likewise.  Handle
	adjacent INTEGER_CST store into merged_store->only_constants like
	overlapping one.

2020-02-25  Jakub Jelinek  <jakub@redhat.com>

	PR other/93912
	* config/sh/sh.c (expand_cbranchdi4): Fix comment typo, probablity
	-> probability.
	* cfghooks.c (verify_flow_info): Likewise.
	* predict.c (combine_predictions_for_bb): Likewise.
	* bb-reorder.c (connect_better_edge_p): Likewise.  Fix comment typo,
	sucessor -> successor.
	(find_traces_1_round): Fix comment typo, destinarion -> destination.
	* omp-expand.c (expand_oacc_for): Fix comment typo, sucessors ->
	successors.
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Fix dump
	message typo, sucessors -> successors.

2020-02-25  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (attribute access): Correct an example.

2020-02-25  Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_scalar_builtin_types):
	Add simd_bf.
	(aarch64_init_simd_builtin_scalar_types): Register simd_bf.
	(VAR15, VAR16): New.
	* config/aarch64/iterators.md (VALLDIF): Enable for V4BF and V8BF.
	(VD): Enable for V4BF.
	(VDC): Likewise.
	(VQ): Enable for V8BF.
	(VQ2): Likewise.
	(VQ_NO2E): Likewise.
	(VDBL, Vdbl): Add V4BF.
	(V_INT_EQUIV, v_int_equiv): Add V4BF and V8BF.
	* config/aarch64/arm_neon.h (bfloat16x4x2_t): New typedef.
	(bfloat16x8x2_t): Likewise.
	(bfloat16x4x3_t): Likewise.
	(bfloat16x8x3_t): Likewise.
	(bfloat16x4x4_t): Likewise.
	(bfloat16x8x4_t): Likewise.
	(vcombine_bf16): New.
	(vld1_bf16, vld1_bf16_x2): New.
	(vld1_bf16_x3, vld1_bf16_x4): New.
	(vld1q_bf16, vld1q_bf16_x2): New.
	(vld1q_bf16_x3, vld1q_bf16_x4): New.
	(vld1_lane_bf16): New.
	(vld1q_lane_bf16): New.
	(vld1_dup_bf16): New.
	(vld1q_dup_bf16): New.
	(vld2_bf16): New.
	(vld2q_bf16): New.
	(vld2_dup_bf16): New.
	(vld2q_dup_bf16): New.
	(vld3_bf16): New.
	(vld3q_bf16): New.
	(vld3_dup_bf16): New.
	(vld3q_dup_bf16): New.
	(vld4_bf16): New.
	(vld4q_bf16): New.
	(vld4_dup_bf16): New.
	(vld4q_dup_bf16): New.
	(vst1_bf16, vst1_bf16_x2): New.
	(vst1_bf16_x3, vst1_bf16_x4): New.
	(vst1q_bf16, vst1q_bf16_x2): New.
	(vst1q_bf16_x3, vst1q_bf16_x4): New.
	(vst1_lane_bf16): New.
	(vst1q_lane_bf16): New.
	(vst2_bf16): New.
	(vst2q_bf16): New.
	(vst3_bf16): New.
	(vst3q_bf16): New.
	(vst4_bf16): New.
	(vst4q_bf16): New.

2020-02-25  Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/aarch64/iterators.md (VDQF_F16) Add V4BF and V8BF.
	(VALL_F16): Likewise.
	(VALLDI_F16): Likewise.
	(Vtype): Likewise.
	(Vetype): Likewise.
	(vswap_width_name): Likewise.
	(VSWAP_WIDTH): Likewise.
	(Vel): Likewise.
	(VEL): Likewise.
	(q): Likewise.
	* config/aarch64/arm_neon.h (vset_lane_bf16, vsetq_lane_bf16): New.
	(vget_lane_bf16, vgetq_lane_bf16): New.
	(vcreate_bf16): New.
	(vdup_n_bf16, vdupq_n_bf16): New.
	(vdup_lane_bf16, vdup_laneq_bf16): New.
	(vdupq_lane_bf16, vdupq_laneq_bf16): New.
	(vduph_lane_bf16, vduph_laneq_bf16): New.
	(vreinterpret_bf16_u8, vreinterpretq_bf16_u8): New.
	(vreinterpret_bf16_u16, vreinterpretq_bf16_u16): New.
	(vreinterpret_bf16_u32, vreinterpretq_bf16_u32): New.
	(vreinterpret_bf16_u64, vreinterpretq_bf16_u64): New.
	(vreinterpret_bf16_s8, vreinterpretq_bf16_s8): New.
	(vreinterpret_bf16_s16, vreinterpretq_bf16_s16): New.
	(vreinterpret_bf16_s32, vreinterpretq_bf16_s32): New.
	(vreinterpret_bf16_s64, vreinterpretq_bf16_s64): New.
	(vreinterpret_bf16_p8, vreinterpretq_bf16_p8): New.
	(vreinterpret_bf16_p16, vreinterpretq_bf16_p16): New.
	(vreinterpret_bf16_p64, vreinterpretq_bf16_p64): New
	(vreinterpret_bf16_f16, vreinterpretq_bf16_f16): New
	(vreinterpret_bf16_f32, vreinterpretq_bf16_f32): New.
	(vreinterpret_bf16_f64, vreinterpretq_bf16_f64): New.
	(vreinterpretq_bf16_p128): New.
	(vreinterpret_s8_bf16, vreinterpretq_s8_bf16): New.
	(vreinterpret_s16_bf16, vreinterpretq_s16_bf16): New.
	(vreinterpret_s32_bf16, vreinterpretq_s32_bf16): New.
	(vreinterpret_s64_bf16, vreinterpretq_s64_bf16): New.
	(vreinterpret_u8_bf16, vreinterpretq_u8_bf16): New.
	(vreinterpret_u16_bf16, vreinterpretq_u16_bf16): New.
	(vreinterpret_u32_bf16, vreinterpretq_u32_bf16): New.
	(vreinterpret_u64_bf16, vreinterpretq_u64_bf16): New.
	(vreinterpret_p8_bf16, vreinterpretq_p8_bf16): New.
	(vreinterpret_p16_bf16, vreinterpretq_p16_bf16): New.
	(vreinterpret_p64_bf16, vreinterpretq_p64_bf16): New.
	(vreinterpret_f32_bf16, vreinterpretq_f32_bf16): New.
	(vreinterpret_f64_bf16,vreinterpretq_f64_bf16): New.
	(vreinterpret_f16_bf16,vreinterpretq_f16_bf16): New.
	(vreinterpretq_p128_bf16): New.

2020-02-25  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm_neon.h (vbfdot_f32, vbfdotq_f32): New
	(vbfdot_lane_f32, vbfdotq_laneq_f32): New.
	(vbfdot_laneq_f32, vbfdotq_lane_f32): New.
	* config/arm/arm_neon_builtins.def (vbfdot): New entry.
	(vbfdot_lanev4bf, vbfdot_lanev8bf): Likewise.
	* config/arm/iterators.md (VSF2BF): New attribute.
	* config/arm/neon.md (neon_vbfdot<VCVTF:mode>): New entry.
	(neon_vbfdot_lanev4bf<VCVTF:mode>): Likewise.
	(neon_vbfdot_lanev8bf<VCVTF:mode>): Likewise.

2020-02-25  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.md (required_for_purecode): New attribute.
	(enabled): Handle required_for_purecode.
	* config/arm/thumb1.md (thumb1_movsi_insn): Add alternative to
	work with -mpure-code.

2020-02-25  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/93908
	* combine.c (find_split_point): For store into ZERO_EXTRACT, and src
	with mask.

2019-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (dwarf2out_size_function): Run in early-DWARF mode.

2020-02-25  Roman Zhuykov  <zhroma@ispras.ru>

	* doc/install.texi (--enable-checking): Adjust wording.

2020-02-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93868
	* tree-vect-slp.c (slp_copy_subtree): New function.
	(vect_attempt_slp_rearrange_stmts): Copy the SLP tree before
	re-arranging stmts in it.

2020-02-25  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/93874
	* passes.c (pass_manager::dump_passes): Create a cgraph node for the
	dummy function and remove it at the end.

	PR translation/93864
	* config/lm32/lm32.c (lm32_setup_incoming_varargs): Fix comment typo
	paramter -> parameter.
	* config/aarch64/aarch64.c (aarch64_is_extend_from_extract): Likewise.
	* ipa-prop.h (struct ipa_agg_replacement_value): Likewise.

2020-02-24  Roman Zhuykov  <zhroma@ispras.ru>

	* doc/install.texi (--enable-checking): Properly document current
	behavior.
	(--enable-stage1-checking): Minor clarification about bootstrap.

2020-02-24  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93032
	* doc/invoke.texi (-Wnanalyzer-tainted-array-index): Note that
	-fanalyzer-checker=taint is also required.
	(-fanalyzer-checker=): Note that providing this option enables the
	given checker, and doing so may be required for checkers that are
	disabled by default.

2020-02-24  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fanalyzer-verbosity=): "2" only shows
	significant control flow events; add a "3" which shows all
	control flow events; the old "3" becomes "4".

2020-02-24  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93582
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Consider
	pd.offset and pd.size to be counted in bits rather than bytes, add
	support for maxsizei that is not a multiple of BITS_PER_UNIT and
	handle bitfield stores and loads.
	(vn_reference_lookup_3): Don't call ranges_known_overlap_p with
	uncomparable quantities - bytes vs. bits.  Allow push_partial_def
	on offsets/sizes that aren't multiple of BITS_PER_UNIT and adjust
	pd.offset/pd.size to be counted in bits rather than bytes.
	Formatting fix.  Rename shadowed len variable to buflen.

2020-02-24  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>
	    Kugan Vivekandarajah  <kugan.vivekanandarajah@linaro.org>

	PR driver/47785
	* gcc.c (putenv_COLLECT_AS_OPTIONS): New function.
	(driver::main): Call putenv_COLLECT_AS_OPTIONS.
	* opts-common.c (parse_options_from_collect_gcc_options): New function.
	(prepend_xassembler_to_collect_as_options): Likewise.
	* opts.h (parse_options_from_collect_gcc_options): Declare prototype.
	(prepend_xassembler_to_collect_as_options): Likewise.
	* lto-opts.c (lto_write_options): Stream assembler options
	in COLLECT_AS_OPTIONS.
	* lto-wrapper.c (xassembler_options_error): New static variable.
	(get_options_from_collect_gcc_options): Move parsing options code to
	parse_options_from_collect_gcc_options and call it.
	(merge_and_complain): Validate -Xassembler options.
	(append_compiler_options): Handle OPT_Xassembler.
	(run_gcc): Append command line -Xassembler options to
	collect_gcc_options.
	* doc/invoke.texi: Add documentation about using Xassembler
	options with LTO.

2020-02-24  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.c (riscv_emit_float_compare): Change the code gen
	for LTGT.
	(riscv_rtx_costs): Update cost model for LTGT.

2020-02-23  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/93564
	* ira-color.c (struct update_cost_queue_elem): New member start.
	(queue_update_cost, get_next_update_cost): Add new arg start.
	(allocnos_conflict_p): New function.
	(update_costs_from_allocno): Add new arg conflict_cost_update_p.
	Add checking conflicts with allocnos_conflict_p.
	(update_costs_from_prefs, restore_costs_from_copies): Adjust
	update_costs_from_allocno calls.
	(update_conflict_hard_regno_costs): Add checking conflicts with
	allocnos_conflict_p.  Adjust calls of queue_update_cost and
	get_next_update_cost.
	(assign_hard_reg): Adjust calls of queue_update_cost.  Add
	debugging print.
	(bucket_allocno_compare_func): Restore previous version.

2020-02-21  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_function_value): Fix check for word and
	double-word size when handling aggregate return values.
	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Fix to indicate
	that homogeneous SFmode and DFmode aggregates are passed and returned
	in general registers.

2020-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR translation/93759
	* opts.c (print_filtered_help): Translate help before appending
	messages to it rather than after that.

2020-02-19  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/PR92989
	* lra-lives.c (process_bb_lives): Restore the original order
	of the bb liveness update.  Call make_hard_regno_dead for each
	register clobbered at the start of an EH receiver.

2020-02-18  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93763
	* ipa-cp.c (self_recursively_generated_p): Mark self-dependent value as
	self-recursively generated.

2020-02-21  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/93860
	* config/darwin-c.c (pop_field_alignment): Adjust quoting of
	error string.

2020-02-21  Mihail Ionescu  <mihail.ionescu@arm.com>

	* doc/sourcebuild.texi (arm_v8_1m_mve_ok):
	Document new target supports option.

2020-02-21  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm_neon.h (vmmlaq_s32, vmmlaq_u32, vusmmlaq_s32): New.
	* config/arm/arm_neon_builtins.def (smmla, ummla, usmmla): New.
	* config/arm/iterators.md (MATMUL): New iterator.
	(sup): Add UNSPEC_MATMUL_S, UNSPEC_MATMUL_U, and UNSPEC_MATMUL_US.
	(mmla_sfx): New attribute.
	* config/arm/neon.md (neon_<sup>mmlav16qi): New.
	* config/arm/unspecs.md (UNSPEC_MATMUL_S, UNSPEC_MATMUL_U): New.
	(UNSPEC_MATMUL_US): New.

2020-02-21  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm.md: Prevent scalar shifts from being used when big
	endian is enabled.

2020-02-21  Jan Hubicka  <hubicka@ucw.cz>
	    Richard Biener  <rguenther@suse.de>

  	PR tree-optimization/93586
	* tree-ssa-alias.c (nonoverlapping_array_refs_p): Finish array walk
	after mismatched array refs; do not sure type size information to
	recover from unmatched referneces with !flag_strict_aliasing_p.

2020-02-21  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (gather_load<mode>): Rename to ...
	(gather_load<mode>v64si): ... this and set operand 2 to V64SI.
	(scatter_store<mode>): Rename to ...
	(scatter_store<mode>v64si): ... this and set operand 1 to V64SI.
	(scatter<mode>_exec): Delete. Move contents ...
	(mask_scatter_store<mode>): ... here, and rename that to ...
	(mask_gather_load<mode>v64si): ... this. Set operand 2 to V64SI.
	Remove mode conversion.
	(mask_gather_load<mode>): Rename to ...
	(mask_scatter_store<mode>v64si): ... this. Set operand 1 to V64SI.
	Remove mode conversion.
	* config/gcn/gcn.c (gcn_expand_scaled_offsets): Remove mode conversion.

2020-02-21  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/93845
	* tree-sra.c (verify_sra_access_forest): Only test access size of
	scalar types.

2020-02-21  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_hard_regno_mode_ok): Align VGPR pairs.
	* config/gcn/gcn-valu.md (addv64di3): Remove early-clobber.
	(addv64di3_exec): Likewise.
	(subv64di3): Likewise.
	(subv64di3_exec): Likewise.
	(addv64di3_zext): Likewise.
	(addv64di3_zext_exec): Likewise.
	(addv64di3_zext_dup): Likewise.
	(addv64di3_zext_dup_exec): Likewise.
	(addv64di3_zext_dup2): Likewise.
	(addv64di3_zext_dup2_exec): Likewise.
	(addv64di3_sext_dup2): Likewise.
	(addv64di3_sext_dup2_exec): Likewise.
	(<expander>v64di3): Likewise.
	(<expander>v64di3_exec): Likewise.
	(*<reduc_op>_dpp_shr_v64di): Likewise.
	(*plus_carry_dpp_shr_v64di): Likewise.
	* config/gcn/gcn.md (adddi3): Likewise.
	(addptrdi3): Likewise.
	(<expander>di3): Likewise.

2020-02-21  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (vec_seriesv64di): Use gen_vec_duplicatev64di.

2020-02-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Add SVE
	support.  Use aarch64_emit_mult instead of emitting multiplication
	instructions directly.
	* config/aarch64/aarch64-sve.md (sqrt<mode>2, rsqrt<mode>2)
	(@aarch64_rsqrte<mode>, @aarch64_rsqrts<mode>): New expanders.

2020-02-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_emit_mult): New function.
	(aarch64_emit_approx_div): Add SVE support.  Use aarch64_emit_mult
	instead of emitting multiplication instructions directly.
	* config/aarch64/iterators.md (SVE_COND_FP_BINARY_OPTAB): New iterator.
	* config/aarch64/aarch64-sve.md (div<mode>3, @aarch64_frecpe<mode>)
	(@aarch64_frecps<mode>): New expanders.

2020-02-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (AARCH64_APPROX_MODE): Operate
	on and produce uint64_ts rather than ints.
	(AARCH64_APPROX_NONE, AARCH64_APPROX_ALL): Change to uint64_ts.
	(cpu_approx_modes): Change the fields from unsigned int to uint64_t.

2020-02-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Don't create
	an unused xmsk register when handling approximate rsqrt.

2020-02-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Fix inverted
	flag_finite_math_only condition.

2020-02-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/93828
	* config/i386/mmx.md (*vec_extractv2sf_1): Match source operand
	to destination operand for shufps alternative.
	(*vec_extractv2si_1): Ditto.

2020-02-20  Peter Bergner  <bergner@linux.ibm.com>

	PR target/93658
	* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Handle VSX
	vector modes.

2020-02-20  Martin Liska  <mliska@suse.cz>

	PR translation/93831
	* config/darwin.c (darwin_override_options): Change 64b to 64-bit mode.

2020-02-20  Martin Liska  <mliska@suse.cz>

	PR translation/93830
	* common/config/avr/avr-common.c: Remote trailing "|".

2020-02-19  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* collect2.c (maybe_run_lto_and_relink): Fix typo in
	comment.

2020-02-19  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/93767
	* tree-vect-data-refs.c (vect_compile_time_alias): Remove the
	access-size bias from the offset calculations for negative strides.

2020-02-19  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* collect2.c (c_file, o_file): Make const again.
	(ldout,lderrout, dump_ld_file): Remove.
	(tool_cleanup): Avoid calling not signal-safe functions.
	(maybe_run_lto_and_relink): Avoid possible signal handler
	access to unintialzed memory (lto_o_files).
	(main): Avoid leaking temp files in $TMPDIR.
	Initialize c_file/o_file with concat, which avoids exposing
	uninitialized memory to signal handler, which calls unlink(!).
	Avoid calling maybe_unlink when the main function returns,
	since the atexit handler is already doing this.
	* collect2.h (dump_ld_file, ldout, lderrout): Remove.

2020-02-19  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/93776
	* tree-sra.c (create_access): Do not create zero size accesses.
	(get_access_for_expr): Do not search for zero sized accesses.

2020-02-19  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/93667
	* tree-sra.c (scalarizable_type_p): Return false if record fields
	do not follow wach other.

2020-01-21  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.c (riscv_output_move) Using fmv.x.w/fmv.w.x
	rather than fmv.x.s/fmv.s.x.

2020-02-18  James Greenhalgh  <james.greenhalgh@arm.com>

	* config/aarch64/aarch64-simd-builtins.def
	(intrinsic_vec_smult_lo_): New.
	(intrinsic_vec_umult_lo_): Likewise.
	(vec_widen_smult_hi_): Likewise.
	(vec_widen_umult_hi_): Likewise.
	* config/aarch64/aarch64-simd.md
	(aarch64_intrinsic_vec_<su>mult_lo_<mode>): New.
	* config/aarch64/arm_neon.h (vmull_high_s8): Use intrinsics.
	(vmull_high_s16): Likewise.
	(vmull_high_s32): Likewise.
	(vmull_high_u8): Likewise.
	(vmull_high_u16): Likewise.
	(vmull_high_u32): Likewise.
	(vmull_s8): Likewise.
	(vmull_s16): Likewise.
	(vmull_s32): Likewise.
	(vmull_u8): Likewise.
	(vmull_u16): Likewise.
	(vmull_u32): Likewise.

2020-02-18  Martin Liska  <mliska@suse.cz>

	* value-prof.c (stream_out_histogram_value): Restore LTO PGO
	bootstrap by missing removal of invalid sanity check.

2020-02-18  Martin Liska  <mliska@suse.cz>

	PR ipa/92518
	* ipa-icf-gimple.c (func_checker::compare_gimple_assign):
	Always compare LHS of gimple_assign.

2020-02-18  Martin Liska  <mliska@suse.cz>

	PR ipa/93583
	* cgraph.c (cgraph_node::verify_node): Verify MALLOC attribute
	and return type of functions.
	* ipa-param-manipulation.c (ipa_param_adjustments::adjust_decl):
	Drop MALLOC attribute for void functions.
	* ipa-pure-const.c (funct_state_summary_t::duplicate): Drop
	malloc_state for a new VOID clone.

2020-02-18  Martin Liska  <mliska@suse.cz>

	PR ipa/92924
	* common.opt: Add -fprofile-reproducibility.
	* doc/invoke.texi: Document it.
	* value-prof.c (dump_histogram_value):
	Document and support behavior for counters[0]
	being a negative value.
	(get_nth_most_common_value): Handle negative
	counters[0] in respect to flag_profile_reproducible.

2020-02-18  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/93797
	* cgraph.c (verify_speculative_call): Use speculative_id instead of
	speculative_uid in messages.  Remove trailing whitespace from error
	message.  Use num_speculative_call_targets instead of
	num_speculative_targets in a message.
	(cgraph_node::verify_node): Use call_stmt instead of cal_stmt in
	edge messages and stmt instead of cal_stmt in reference message.

	PR tree-optimization/93780
	* tree-ssa.c (non_rewritable_lvalue_p): Check valid_vector_subparts_p
	before calling build_vector_type.
	(execute_update_addresses_taken): Likewise.

	PR driver/93796
	* params.opt (-param=ipa-max-switch-predicate-bounds=): Fix help
	typo, functoin -> function.
	* tree.c (free_lang_data_in_decl): Fix comment typo,
	functoin -> function.
	* ipa-visibility.c (cgraph_externally_visible_p): Likewise.

2020-02-17  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic.c (print_any_cwe): Don't call get_cwe_url if URLs
	won't be printed.
	(print_option_information): Don't call get_option_url if URLs
	won't be printed.

2020-02-17  Alexandre Oliva  <oliva@adacore.com>

	* tree-emutls.c (new_emutls_decl, emutls_common_1): Complete
	handling of register_common-less targets.

2020-02-17  Martin Liska  <mliska@suse.cz>

	PR ipa/93760
	* ipa-devirt.c (odr_types_equivalent_p): Fix grammar.

2020-02-17  Martin Liska  <mliska@suse.cz>

	PR translation/93755
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Fix double quotes.

2020-02-17  Martin Liska  <mliska@suse.cz>

	PR other/93756
	* config/rx/elf.opt: Fix typo.

2020-02-17  Richard Biener  <rguenther@suse.de>

	PR c/86134
	* opts-global.c (print_ignored_options): Use inform and
	amend message.

2020-02-17  Jiufu Guo  <guojiufu@linux.ibm.com>

	PR target/93047
	* config/rs6000/rs6000.md (untyped_call): Add emit_clobber.

2020-02-16  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/93743
	* config/i386/i386.md (atan2xf3): Swap operands 1 and 2.
	(atan2<mode>3): Update operand order in the call to gen_atan2xf3.

2020-02-15  Jason Merrill  <jason@redhat.com>

	* doc/invoke.texi (C Dialect Options): Add -std=c++20.

2020-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93744
	* match.pd (((m1 >/</>=/<= m2) * d -> (m1 >/</>=/<= m2) ? d : 0,
	A - ((A - B) & -(C cmp D)) -> (C cmp D) ? B : A,
	A + ((B - A) & -(C cmp D)) -> (C cmp D) ? B : A): For GENERIC, make
	sure @2 in the first and @1 in the other patterns has no side-effects.

2020-02-15  David Malcolm  <dmalcolm@redhat.com>
	    Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR 87488
	PR other/93168
	* config.in (DIAGNOSTICS_URLS_DEFAULT): New define.
	* configure.ac (--with-diagnostics-urls): New configuration
	option, based on --with-diagnostics-color.
	(DIAGNOSTICS_URLS_DEFAULT): New define.
	* config.h: Regenerate.
	* configure: Regenerate.
	* diagnostic.c (diagnostic_urls_init): Handle -1 for
	DIAGNOSTICS_URLS_DEFAULT from configure-time
	--with-diagnostics-urls=auto-if-env by querying for a GCC_URLS
	and TERM_URLS environment variable.
	* diagnostic-url.h (diagnostic_url_format): New enum type.
	(diagnostic_urls_enabled_p): rename to...
	(determine_url_format): ... this, and change return type.
	* diagnostic-color.c (parse_env_vars_for_urls): New helper function.
	(auto_enable_urls): Disable URLs on xfce4-terminal, gnome-terminal,
	the linux console, and mingw.
	(diagnostic_urls_enabled_p): rename to...
	(determine_url_format): ... this, and adjust.
	* pretty-print.h (pretty_printer::show_urls): rename to...
	(pretty_printer::url_format): ... this, and change to enum.
	* pretty-print.c (pretty_printer::pretty_printer,
	pp_begin_url, pp_end_url, test_urls): Adjust.
	* doc/install.texi (--with-diagnostics-urls): Document the new
	configuration option.
	(--with-diagnostics-color): Document the existing interaction
	with GCC_COLORS better.
	* doc/invoke.texi (-fdiagnostics-urls): Add GCC_URLS and TERM_URLS
	vindex reference.  Update description of defaults based on the above.
	(-fdiagnostics-color): Update description of how -fdiagnostics-color
	interacts with GCC_COLORS.

2020-02-14  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/93704
	* config/sparc/sparc.c (eligible_for_call_delay): Test HAVE_GNU_LD in
	conjunction with TARGET_GNU_TLS in early return.

2020-02-14  Alexander Monakov  <amonakov@ispras.ru>

	* rtlanal.c (rtx_cost): Handle a SET up front. Avoid division if
	the mode is not wider than UNITS_PER_WORD.

2020-02-14  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/93516
	* tree-sra.c (propagate_subaccesses_from_rhs): Do not create
	access of the same type as the parent.
	(propagate_subaccesses_from_lhs): Likewise.

2020-02-14 Hongtao Liu  <hongtao.liu@intel.com>

	PR target/93724
	* config/i386/avx512vbmi2intrin.h
	(_mm512_shrdi_epi16, _mm512_mask_shrdi_epi16,
	_mm512_maskz_shrdi_epi16, _mm512_shrdi_epi32,
	_mm512_mask_shrdi_epi32, _mm512_maskz_shrdi_epi32,
	_m512_shrdi_epi64, _m512_mask_shrdi_epi64,
	_m512_maskz_shrdi_epi64, _mm512_shldi_epi16,
	_mm512_mask_shldi_epi16, _mm512_maskz_shldi_epi16,
	_mm512_shldi_epi32, _mm512_mask_shldi_epi32,
	_mm512_maskz_shldi_epi32, _mm512_shldi_epi64,
	_mm512_mask_shldi_epi64, _mm512_maskz_shldi_epi64): Fix typo
	of lacking a closing parenthesis.
	* config/i386/avx512vbmi2vlintrin.h
	(_mm256_shrdi_epi16, _mm256_mask_shrdi_epi16,
	_mm256_maskz_shrdi_epi16, _mm256_shrdi_epi32,
	_mm256_mask_shrdi_epi32, _mm256_maskz_shrdi_epi32,
	_m256_shrdi_epi64, _m256_mask_shrdi_epi64,
	_m256_maskz_shrdi_epi64, _mm256_shldi_epi16,
	_mm256_mask_shldi_epi16, _mm256_maskz_shldi_epi16,
	_mm256_shldi_epi32, _mm256_mask_shldi_epi32,
	_mm256_maskz_shldi_epi32, _mm256_shldi_epi64,
	_mm256_mask_shldi_epi64, _mm256_maskz_shldi_epi64,
	_mm_shrdi_epi16, _mm_mask_shrdi_epi16,
	_mm_maskz_shrdi_epi16, _mm_shrdi_epi32,
	_mm_mask_shrdi_epi32, _mm_maskz_shrdi_epi32,
	_mm_shrdi_epi64, _mm_mask_shrdi_epi64,
	_m_maskz_shrdi_epi64, _mm_shldi_epi16,
	_mm_mask_shldi_epi16, _mm_maskz_shldi_epi16,
	_mm_shldi_epi32, _mm_mask_shldi_epi32,
	_mm_maskz_shldi_epi32, _mm_shldi_epi64,
	_mm_mask_shldi_epi64, _mm_maskz_shldi_epi64): Ditto.

2020-02-13  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/93656
	* config/i386/i386.c (ix86_trampoline_init): Skip ENDBR32 at
	the target function entry.

2020-02-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* common/config/arc/arc-common.c (arc_option_optimization_table):
	Disable if-conversion step when optimized for size.

2020-02-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_conditional_register_usage): R0-R3 and
	R12-R15 are always in ARCOMPACT16_REGS register class.
	* config/arc/arc.opt (mq-class): Deprecate.
	* config/arc/constraint.md ("q"): Remove dependency on mq-class
	option.
	* doc/invoke.texi (mq-class): Update text.
	* common/config/arc/arc-common.c (arc_option_optimization_table):
	Update list.

2020-02-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_insn_cost): New function.
	(TARGET_INSN_COST): Define.
	* config/arc/arc.md (cost): New attribute.
	(add_n): Use arc_nonmemory_operand.
	(ashlsi3_insn): Likewise, also update constraints.
	(ashrsi3_insn): Likewise.
	(rotrsi3): Likewise.
	(add_shift): Likewise.
	* config/arc/predicates.md (arc_nonmemory_operand): New predicate.

2020-02-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (mulsidi_600): Correctly select mlo/mhi
	registers.
	(umulsidi_600): Likewise.

2020-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/93696
	* config/i386/avx512bitalgintrin.h (_mm512_mask_popcnt_epi8,
	_mm512_mask_popcnt_epi16, _mm256_mask_popcnt_epi8,
	_mm256_mask_popcnt_epi16, _mm_mask_popcnt_epi8,
	_mm_mask_popcnt_epi16): Rename __B argument to __A and __A to __W,
	pass __A to the builtin followed by __W instead of __A followed by
	__B.
	* config/i386/avx512vpopcntdqintrin.h (_mm512_mask_popcnt_epi32,
	_mm512_mask_popcnt_epi64): Likewise.
	* config/i386/avx512vpopcntdqvlintrin.h (_mm_mask_popcnt_epi32,
	_mm256_mask_popcnt_epi32, _mm_mask_popcnt_epi64,
	_mm256_mask_popcnt_epi64): Likewise.

	PR tree-optimization/93582
	* fold-const.h (shift_bytes_in_array_left,
	shift_bytes_in_array_right): Declare.
	* fold-const.c (shift_bytes_in_array_left,
	shift_bytes_in_array_right): New function, moved from
	gimple-ssa-store-merging.c, no longer static.
	* gimple-ssa-store-merging.c (shift_bytes_in_array): Move
	to gimple-ssa-store-merging.c and rename to shift_bytes_in_array_left.
	(shift_bytes_in_array_right): Move to gimple-ssa-store-merging.c.
	(encode_tree_to_bitpos): Use shift_bytes_in_array_left instead of
	shift_bytes_in_array.
	(verify_shift_bytes_in_array): Rename to ...
	(verify_shift_bytes_in_array_left): ... this.  Use
	shift_bytes_in_array_left instead of shift_bytes_in_array.
	(store_merging_c_tests): Call verify_shift_bytes_in_array_left
	instead of verify_shift_bytes_in_array.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): For native_encode_expr
	/ native_interpret_expr where the store covers all needed bits,
	punt on PDP-endian, otherwise allow all involved offsets and sizes
	not to be byte-aligned.

	PR target/93673
	* config/i386/sse.md (k<code><mode>): Drop mode from last operand and
	use const_0_to_255_operand predicate instead of immediate_operand.
	(avx512dq_fpclass<mode><mask_scalar_merge_name>,
	avx512dq_vmfpclass<mode><mask_scalar_merge_name>,
	vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>): Drop mode from
	const_0_to_255_operand predicated operands.

2020-02-12  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (comparison shortening peepholes): Use
	a mode iterator to merge the HImode and SImode peepholes.

2020-02-12  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/93663
	* real.c (is_even): Make static.  Function comment fix.
	(is_halfway_below): Make static, don't assert R is not inf/nan,
	instead return false for those.  Small formatting fixes.

2020-02-12  Martin Sebor  <msebor@redhat.com>

	PR middle-end/93646
	* tree-ssa-strlen.c (handle_builtin_stxncpy): Rename...
	(handle_builtin_stxncpy_strncat): ...to this.  Change first argument.
	Issue only -Wstringop-overflow strncat, never -Wstringop-truncation.
	(strlen_check_and_optimize_call): Adjust callee name.

2020-02-12  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (comparison shortening peepholes): Drop
	(and (xor)) variant.  Combine other two into single peephole.

2020-02-12  Wilco Dijkstra  <wdijkstr@arm.com>

	PR rtl-optimization/93565
	* config/aarch64/aarch64.c (aarch64_rtx_costs): Add CTZ costs.

2020-02-12  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64-simd.md
	(aarch64_zero_extend<GPI:mode>_reduc_plus_<VDQV_E:mode>): New pattern.
	* config/aarch64/aarch64.md (popcount<mode>2): Use it instead of
	generating separate ADDV and zero_extend patterns.
	* config/aarch64/iterators.md (VDQV_E): New iterator.

2020-02-12  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (cpymemsi, movmd): Remove dead patterns,
	expanders, splits, etc.
	(movmd_internal_<mode>, movmd splitter, movstr, movsd): Likewise.
	(stpcpy_internal_<mode>, stpcpy splitter): Likewise.
	(peepholes to convert QI/HI mode pushes to SI mode pushes): Likewise.
	* config/h8300/h8300.c (h8300_swap_into_er6): Remove unused function.
	(h8300_swap_out_of_er6, h8sx_emit_movmd): Likewise
	* config/h8300/h8300-protos.h (h8300_swap_into_er6): Remove unused
	function prototype.
	(h8300_swap_out_of_er6, h8sx_emit_movmd): Likewise.

2020-02-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/93670
	* config/i386/sse.md (VI48F_256_DQ): New mode iterator.
	(avx512vl_vextractf128<mode>): Use it instead of VI48F_256.  Remove
	TARGET_AVX512DQ from condition.
	(vec_extract_lo_<mode><mask_name>): Use <mask_avx512dq_condition>
	instead of <mask_mode512bit_condition> in condition.  If
	TARGET_AVX512DQ is false, emit vextract*64x4 instead of
	vextract*32x8.
	(vec_extract_lo_<mode><mask_name>): Drop <mask_avx512dq_condition>
	from condition.

2020-02-12  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/91052
	* ira.c (combine_and_move_insns): Skip multiple_sets def_insn.

2020-02-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_debug_print_mode): Don't use sizeof
	where strlen is more legible.
	(rs6000_builtin_vectorized_libmass): Ditto.
	(rs6000_print_options_internal): Ditto.

2020-02-11  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/93683
	* tree-ssa-alias.c (stmt_kills_ref_p): Avoid using LHS when not set.

2020-02-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (cint34_operand): Rename the
	-mprefixed-addr option to be -mprefixed.
	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Rename
	the -mprefixed-addr option to be -mprefixed.
	(OTHER_FUTURE_MASKS): Likewise.
	(POWERPC_MASKS): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Rename
	the -mprefixed-addr option to be -mprefixed.  Change error
	messages to refer to -mprefixed.
	(num_insns_constant_gpr): Rename the -mprefixed-addr option to be
	-mprefixed.
	(rs6000_legitimate_offset_address_p): Likewise.
	(rs6000_mode_dependent_address): Likewise.
	(rs6000_opt_masks): Change the spelling of "-mprefixed-addr" to be
	"-mprefixed" for target attributes and pragmas.
	(address_to_insn_form): Rename the -mprefixed-addr option to be
	-mprefixed.
	(rs6000_adjust_insn_length): Likewise.
	* config/rs6000/rs6000.h (FINAL_PRESCAN_INSN): Rename the
	-mprefixed-addr option to be -mprefixed.
	(ASM_OUTPUT_OPCODE): Likewise.
	* config/rs6000/rs6000.md (prefixed insn attribute): Rename the
	-mprefixed-addr option to be -mprefixed.
	* config/rs6000/rs6000.opt (-mprefixed): Rename the
	-mprefixed-addr option to be prefixed.  Change the option from
	being undocumented to being documented.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document the
	-mprefixed option.  Update the -mpcrel documentation to mention
	-mprefixed.

2020-02-11  Hans-Peter Nilsson  <hp@axis.com>

	* ira-conflicts.c (print_hard_reg_set): Correct output for sets
	including FIRST_PSEUDO_REGISTER - 1.
	* ira-color.c (print_hard_reg_set): Ditto.

2020-02-11  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/arm/arm-builtins.c (enum arm_type_qualifiers): 
	(USTERNOP_QUALIFIERS): New define.
	(USMAC_LANE_QUADTUP_QUALIFIERS): New define.
	(SUMAC_LANE_QUADTUP_QUALIFIERS): New define.
	(arm_expand_builtin_args): Add case ARG_BUILTIN_LANE_QUADTUP_INDEX.
	(arm_expand_builtin_1): Add qualifier_lane_quadtup_index.
	* config/arm/arm_neon.h (vusdot_s32): New.
	(vusdot_lane_s32): New.
	(vusdotq_lane_s32): New.
	(vsudot_lane_s32): New.
	(vsudotq_lane_s32): New.
	* config/arm/arm_neon_builtins.def (usdot, usdot_lane,sudot_lane): New.
	* config/arm/iterators.md (DOTPROD_I8MM): New.
	(sup, opsuffix): Add <us/su>.
	* config/arm/neon.md (neon_usdot, <us/su>dot_lane: New.
	* config/arm/unspecs.md (UNSPEC_DOT_US, UNSPEC_DOT_SU): New.

2020-02-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93661
	PR tree-optimization/93662
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Properly guard
	tree_to_poly_int64.
	* tree-sra.c (get_access_for_expr): Likewise.

2020-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/93637
	* config/i386/sse.md (VI_256_AVX2): New mode iterator.
	(vcond_mask_<mode><sseintvecmodelower>): Use it instead of VI_256.
	Change condition from TARGET_AVX2 to TARGET_AVX.

2020-02-10  Iain Sandoe  <iain@sandoe.co.uk>

	PR other/93641
	* config/darwin-c.c (darwin_cfstring_ref_p): Fix up last
	argument of strncmp.

2020-02-10  Hans-Peter Nilsson  <hp@axis.com>

	Try to generate zero-based comparisons.
	* config/cris/cris.c (cris_reduce_compare): New function.
	* config/cris/cris-protos.h  (cris_reduce_compare): Add prototype.
	* config/cris/cris.md ("cbranch<mode>4", "cbranchdi4", "cstoredi4")
	(cstore<mode>4"): Apply cris_reduce_compare in expanders.

2020-02-10  Richard Earnshaw  <rearnsha@arm.com>

	PR target/91913
	* config/arm/arm.md (movsi_compare0): Allow SP as a source register
	in Thumb state and also as a destination in Arm state.  Add T16
	variants.

2020-02-10  Hans-Peter Nilsson  <hp@axis.com>

	* md.texi (Define Subst): Match closing paren in example.

2020-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/58218
	PR other/93641
	* config/i386/i386.c (x86_64_elf_section_type_flags): Fix up last
	arguments of strncmp.

2020-02-10  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93203
	* ipa-cp.c (ipcp_lattice::add_value): Add source with same call edge
	but different source value.
	(adjust_callers_for_value_intersection): New function.
	(gather_edges_for_value): Adjust order of callers to let a
	non-self-recursive caller be the first element.
	(self_recursive_pass_through_p): Add a new parameter "simple", and
	check generalized self-recursive pass-through jump function.
	(self_recursive_agg_pass_through_p): Likewise.
	(find_more_scalar_values_for_callers_subset): Compute value from
	pass-through jump function for self-recursive.
	(intersect_with_plats): Cleanup previous implementation code for value
	itersection with self-recursive call edge.
	(intersect_with_agg_replacements): Likewise.
	(intersect_aggregates_with_edge): Deduce value from pass-through jump
	function for self-recursive call edge.  Cleanup previous implementation
	code for value intersection with self-recursive call edge.
	(decide_whether_version_node): Remove dead callers and adjust order
	to let a non-self-recursive caller be the first element.

2020-02-09  Uroš Bizjak  <ubizjak@gmail.com>

	* recog.c: Move pass_split_before_sched2 code in front of
	pass_split_before_regstack.
	(pass_data_split_before_sched2): Rename pass to split3 from split4.
	(pass_data_split_before_regstack): Rename pass to split4 from split3.
	(rest_of_handle_split_before_sched2): Remove.
	(pass_split_before_sched2::execute): Unconditionally call
	split_all_insns.
	(enable_split_before_sched2): New function.
	(pass_split_before_sched2::gate): Use enable_split_before_sched2.
	(pass_split_before_regstack::gate): Ditto.
	* config/nds32/nds32.c (nds32_split_double_word_load_store_p):
	Update name check for renamed split4 pass.
	* config/sh/sh.c (register_sh_passes): Update pass insertion
	point for renamed split4 pass.

2020-02-09  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_adjust_omp_clauses_1): Promote
	DECL_IN_CONSTANT_POOL variables into "omp declare target" to avoid
	copying them around between host and target.

2020-02-08  Andrew Pinski  <apinski@marvell.com>

	PR target/91927
	* config/aarch64/aarch64-simd.md (movmisalign<mode>): Check
	STRICT_ALIGNMENT also.

2020-02-08  Jim Wilson  <jimw@sifive.com>

	PR target/93532
	* config/riscv/riscv.h (HARD_REGNO_CALLER_SAVE_MODE): Define.

2020-02-08  Uroš Bizjak  <ubizjak@gmail.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/65782
	* config/i386/i386.h (CALL_USED_REGISTERS): Make
	xmm16-xmm31 call-used even in 64-bit ms-abi.

2020-02-07  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64-simd-builtins.def (simd_smmla): New entry.
	(simd_ummla, simd_usmmla): Likewise.
	* config/aarch64/aarch64-simd.md (aarch64_simd_<sur>mmlav16qi): New.
	* config/aarch64/arm_neon.h (vmmlaq_s32, vmmlaq_u32): New.
	(vusmmlaq_s32): New.

2020-02-07  Richard Biener  <rguenther@suse.de>

	PR middle-end/93519
	* tree-inline.c (fold_marked_statements): Do a PRE walk,
	skipping unreachable regions.
	(optimize_inline_calls): Skip folding stmts when we didn't
	inline.

2020-02-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85667
	* config/i386/i386.c (function_arg_ms_64): Add a type argument.
	Don't return aggregates with only SFmode and DFmode in SSE
	register.
	(ix86_function_arg): Pass arg.type to function_arg_ms_64.

2020-02-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/93122
	* config/rs6000/rs6000-logue.c
	(rs6000_emit_probe_stack_range_stack_clash): Always use gen_add3_insn,
	if it fails, move rs into end_addr and retry.  Add
	REG_FRAME_RELATED_EXPR note whenever it returns more than one insn or
	the insn pattern doesn't describe well what exactly happens to
	dwarf2cfi.c.

	PR target/93594
	* config/i386/predicates.md (avx_identity_operand): Remove.
	* config/i386/sse.md (*avx_vec_concat<mode>_1): Remove.
	(avx_<castmode><avxsizesuffix>_<castmode>,
	avx512f_<castmode><avxsizesuffix>_256<castmode>): Change patterns to
	a VEC_CONCAT of the operand and UNSPEC_CAST.
	(avx512f_<castmode><avxsizesuffix>_<castmode>): Change pattern to
	a VEC_CONCAT of VEC_CONCAT of the operand and UNSPEC_CAST with
	UNSPEC_CAST.

	PR target/93611
	* config/i386/i386.c (ix86_lea_outperforms): Make sure to clear
	recog_data.insn if distance_non_agu_define changed it.

2020-02-06  Michael Meissner  <meissner@linux.ibm.com>

	PR target/93569
	* config/rs6000/rs6000.c (reg_to_non_prefixed): Before ISA 3.0
	we only had X-FORM (reg+reg) addressing for vectors.  Also before
	ISA 3.0, we only had X-FORM addressing for scalars in the
	traditional Altivec registers.

2020-02-06  <zhongyunde@huawei.com>
  	    Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/93561
	* lra-assigns.c (spill_for): Check that tested hard regno is not out of
	hard register range.

2020-02-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (aarch64_movk<mode>): Add a type
	attribute.

2020-02-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_emit_set_long_const): Handle the case
	where the low and the high 32 bits are equal to each other specially,
	with an rldimi instruction.

2020-02-06  Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm-cpus.in: Set profile M for armv8.1-m.main.

2020-02-06  Mihail Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm-tables.opt: Regenerate.

2020-02-06  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/87763
	* config/aarch64/aarch64-protos.h (aarch64_movk_shift): Declare.
	* config/aarch64/aarch64.c (aarch64_movk_shift): New function.
	* config/aarch64/aarch64.md (aarch64_movk<mode>): New pattern.

2020-02-06  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64.md (*ashiftsi_extvdi_bfiz): New pattern.

2020-02-06  Delia Burduv  <delia.burduv@arm.com>

	* config/aarch64/aarch64-simd-builtins.def
	(bfmlaq): New built-in function.
	(bfmlalb): New built-in function.
	(bfmlalt): New built-in function.
	(bfmlalb_lane): New built-in function.
	(bfmlalt_lane): New built-in function.
	* config/aarch64/aarch64-simd.md
	(aarch64_bfmmlaqv4sf): New pattern.
	(aarch64_bfmlal<bt>v4sf): New pattern.
	(aarch64_bfmlal<bt>_lane<q>v4sf): New pattern.
	* config/aarch64/arm_neon.h (vbfmmlaq_f32): New intrinsic.
	(vbfmlalbq_f32): New intrinsic.
	(vbfmlaltq_f32): New intrinsic.
	(vbfmlalbq_lane_f32): New intrinsic.
	(vbfmlaltq_lane_f32): New intrinsic.
	(vbfmlalbq_laneq_f32): New intrinsic.
	(vbfmlaltq_laneq_f32): New intrinsic.
	* config/aarch64/iterators.md (BF_MLA): New int iterator.
	(bt): New int attribute.

2020-02-06  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*pushtf): Emit "#" instead of
	calling gcc_unreachable in insn output.
	(*pushxf): Ditto.
	(*pushdf): Ditto.
	(*pushsf_rex64): Ditto for alternatives other than 1.
	(*pushsf): Ditto for alternatives other than 1.

2020-02-06  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/91971
	PR gcov-profile/93466
	* coverage.c (coverage_init): Revert mangling of
	path into filename.  It can lead to huge filename length.
	Creation of subfolders seem more natural.

2020-02-06  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	PR target/93300
	* config/arm/arm.c (arm_block_arith_comp_libfuncs_for_mode): New.
	(arm_init_libfuncs): Add BFmode support to block spurious BF libfuncs.
	Use arm_block_arith_comp_libfuncs_for_mode for HFmode.

2020-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/93594
	* config/i386/predicates.md (avx_identity_operand): New predicate.
	* config/i386/sse.md (*avx_vec_concat<mode>_1): New
	define_insn_and_split.

	PR libgomp/93515
	* omp-low.c (use_pointer_for_field): For nested constructs, also
	look for map clauses on target construct.
	(scan_omp_1_stmt) <case GIMPLE_OMP_TARGET>: Bump temporarily
	taskreg_nesting_level.

	PR libgomp/93515
	* gimplify.c (gimplify_scan_omp_clauses) <do_notice>: If adding
	shared clause, call omp_notice_variable on outer context if any.

2020-02-05  Jason Merrill  <jason@redhat.com>

	PR c++/92003
	* symtab.c (symtab_node::nonzero_address): A DECL_COMDAT decl has
	non-zero address even if weak and not yet defined.

2020-02-05  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92765
	* gimple-fold.c (get_range_strlen_tree): Handle MEM_REF and PARM_DECL.
	* tree-ssa-strlen.c (compute_string_length): Remove.
	(determine_min_objsize): Remove.
	(get_len_or_size): Add an argument.  Call get_range_strlen_dynamic.
	Avoid using type size as the upper bound on string length.
	(handle_builtin_string_cmp): Add an argument.  Adjust.
	(strlen_check_and_optimize_call): Pass additional argument to
	handle_builtin_string_cmp.

2020-02-05  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*pushdi2_rex64 peephole2): Remove.
	(*pushdi2_rex64 peephole2): Unconditionally split after
	epilogue_completed.
	(*ashl<mode>3_doubleword): Ditto.
	(*<shift_insn><mode>3_doubleword): Ditto.

2020-02-05  Michael Meissner  <meissner@linux.ibm.com>

	PR target/93568
	* config/rs6000/rs6000.c (get_vector_offset): Fix

2020-02-05  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/t-gcn-hsa (MULTILIB_OPTIONS): Use / not space.

2020-02-05  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi
	(Special Functions for Debugging the Analyzer): Update description
	of __analyzer_dump_exploded_nodes.

2020-02-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/92190
	* config/i386/i386-features.c (ix86_add_reg_usage_to_vzeroupper): Only
	include sets and not clobbers in the vzeroupper pattern.
	* config/i386/sse.md (*avx_vzeroupper): Require in insn condition that
	the parallel has 17 (64-bit) or 9 (32-bit) elts.
	(*avx_vzeroupper_1): New define_insn_and_split.

	PR target/92190
	* recog.c (pass_split_after_reload::gate): For STACK_REGS targets,
	don't run when !optimize.
	(pass_split_before_regstack::gate): For STACK_REGS targets, run even
	when !optimize.

2020-02-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/90648
	* genmatch.c (dt_node::gen_kids_1): Emit number of argument
	checks before matching calls.

2020-02-05  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssa-alias.c (aliasing_matching_component_refs_p): Fix up
	function comment typo.

	PR middle-end/93555
	* omp-simd-clone.c (expand_simd_clones): If simd_clone_mangle or
	simd_clone_create failed when i == 0, adjust clone->nargs by
	clone->inbranch.

2020-02-05  Martin Liska  <mliska@suse.cz>

	PR c++/92717
	* doc/invoke.texi: Document that one should
	not combine ASLR and -fpch.

2020-02-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93538
	* match.pd (addr EQ/NE ptr): Amend to handle &ptr->x EQ/NE ptr.

2020-02-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91123
	* tree-ssa-sccvn.c (vn_walk_cb_data::finish): New method.
	(vn_walk_cb_data::last_vuse): New member.
	(vn_walk_cb_data::saved_operands): Likewsie.
	(vn_walk_cb_data::~vn_walk_cb_data): Release saved_operands.
	(vn_walk_cb_data::push_partial_def): Use finish.
	(vn_reference_lookup_2): Update last_vuse and use finish if
	we've saved operands.
	(vn_reference_lookup_3): Use finish and update calls to
	push_partial_defs everywhere.  When translating through
	memcpy or aggregate copies save off operands and alias-set.
	(eliminate_dom_walker::eliminate_stmt): Restore VN_WALKREWRITE
	operation for redundant store removal.

2020-02-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92819
	* tree-ssa-forwprop.c (simplify_vector_constructor): Avoid
	generating more stmts than before.

2020-02-04  Martin Liska  <mliska@suse.cz>

	* config/arm/arm.c (arm_gen_far_branch): Move the function
	outside of selftests.

2020-02-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (adjust_vec_address_pcrel): New helper
	function to adjust PC-relative vector addresses.
	(rs6000_adjust_vec_address): Call adjust_vec_address_pcrel to
	handle vectors with PC-relative addresses.

2020-02-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (reg_to_non_prefixed): Add forward
	reference.
	(hard_reg_and_mode_to_addr_mask): Delete.
	(rs6000_adjust_vec_address): If the original vector address
	was REG+REG or REG+OFFSET and the element is not zero, do the add
	of the elements in the original address before adding the offset
	for the vector element.  Use address_to_insn_form to validate the
	address using the register being loaded, rather than guessing
	whether the address is a DS-FORM or DQ-FORM address.

2020-02-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (get_vector_offset): New helper function
	to calculate the offset in memory from the start of a vector of a
	particular element.  Add code to keep the element number in
	bounds if the element number is variable.
	(rs6000_adjust_vec_address): Move calculation of offset of the
	vector element to get_vector_offset.
	(rs6000_split_vec_extract_var): Do not do the initial AND of
	element here, move the code to get_vector_offset.

2020-02-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_adjust_vec_address): Add some
	gcc_asserts.

2020-02-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md: Improve documentation.

2020-02-03  Richard Earnshaw  <rearnsha@arm.com>

	PR target/93548
	* config/arm/t-arm: ($(srcdir)/config/arm/arm-tune.md)
	($(srcdir)/config/arm/arm-tables.opt): Use move-if-change.

2020-02-03  Andrew Stubbs  <ams@codesourcery.com>

	* config.gcc: Remove "carrizo" support.
	* config/gcn/gcn-opts.h (processor_type): Likewise.
	* config/gcn/gcn.c (gcn_omp_device_kind_arch_isa): Likewise.
	* config/gcn/gcn.opt (gpu_type): Likewise.
	* config/gcn/t-omp-device: Likewise.

2020-02-03  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	PR target/91816
	* config/arm/arm-protos.h: New function arm_gen_far_branch prototype.
	* config/arm/arm.c (arm_gen_far_branch): New function
	arm_gen_far_branch.
	* config/arm/arm.md: Update b<cond> for Thumb2 range checks.

2020-02-03  Julian Brown  <julian@codesourcery.com>
	    Tobias Burnus  <tobias@codesourcery.com>

	* doc/invoke.texi: Update mention of OpenACC version to 2.6.

2020-02-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/93533
	* config/s390/s390.md (popcounthi2_z196): Fix up expander to emit
	valid RTL to sum up the lowest and second lowest bytes of the popcnt
	result.

2020-02-02  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/91333
	* ira-color.c (struct allocno_color_data): Add member
	hard_reg_prefs.
	(init_allocno_threads): Set the member up.
	(bucket_allocno_compare_func): Add compare hard reg
	prefs.

2020-01-31  Sandra Loosemore  <sandra@codesourcery.com>

	nios2: Support for GOT-relative DW_EH_PE_datarel encoding.

	* configure.ac [nios2-*-*]: Check HAVE_AS_NIOS2_GOTOFF_RELOCATION.
	* config.in: Regenerated.
	* configure: Regenerated.
	* config/nios2/nios2.h (ASM_PREFERRED_EH_DATA_FORMAT): Fix handling
	for PIC when HAVE_AS_NIOS2_GOTOFF_RELOCATION.
	(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): New.

2020-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

	* configure: Regenerate.

2020-01-31  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/91333
	* ira-color.c (bucket_allocno_compare_func): Move conflict hard
	reg preferences comparison up.

2020-01-31  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.h (TARGET_SVE_BF16): New macro.
	* config/aarch64/aarch64-sve-builtins-sve2.h (svcvtnt): Move to
	aarch64-sve-builtins-base.h.
	* config/aarch64/aarch64-sve-builtins-sve2.cc (svcvtnt): Move to
	aarch64-sve-builtins-base.cc.
	* config/aarch64/aarch64-sve-builtins-base.h (svbfdot, svbfdot_lane)
	(svbfmlalb, svbfmlalb_lane, svbfmlalt, svbfmlalt_lane, svbfmmla)
	(svcvtnt): Declare.
	* config/aarch64/aarch64-sve-builtins-base.cc (svbfdot, svbfdot_lane)
	(svbfmlalb, svbfmlalb_lane, svbfmlalt, svbfmlalt_lane, svbfmmla)
	(svcvtnt): New functions.
	* config/aarch64/aarch64-sve-builtins-base.def (svbfdot, svbfdot_lane)
	(svbfmlalb, svbfmlalb_lane, svbfmlalt, svbfmlalt_lane, svbfmmla)
	(svcvtnt): New functions.
	(svcvt): Add a form that converts f32 to bf16.
	* config/aarch64/aarch64-sve-builtins-shapes.h (ternary_bfloat)
	(ternary_bfloat_lane, ternary_bfloat_lanex2, ternary_bfloat_opt_n):
	Declare.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (parse_element_type):
	Treat B as bfloat16_t.
	(ternary_bfloat_lane_base): New class.
	(ternary_bfloat_def): Likewise.
	(ternary_bfloat): New shape.
	(ternary_bfloat_lane_def): New class.
	(ternary_bfloat_lane): New shape.
	(ternary_bfloat_lanex2_def): New class.
	(ternary_bfloat_lanex2): New shape.
	(ternary_bfloat_opt_n_def): New class.
	(ternary_bfloat_opt_n): New shape.
	* config/aarch64/aarch64-sve-builtins.cc (TYPES_cvt_bfloat): New macro.
	* config/aarch64/aarch64-sve.md (@aarch64_sve_<sve_fp_op>vnx4sf)
	(@aarch64_sve_<sve_fp_op>_lanevnx4sf): New patterns.
	(@aarch64_sve_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>)
	(@cond_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>): Likewise.
	(*cond_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>): Likewise.
	(@aarch64_sve_cvtnt<VNx8BF_ONLY:mode>): Likewise.
	* config/aarch64/aarch64-sve2.md (@aarch64_sve2_cvtnt<mode>): Key
	the pattern off the narrow mode instead of the wider one.
	* config/aarch64/iterators.md (VNx8BF_ONLY): New mode iterator.
	(UNSPEC_BFMLALB, UNSPEC_BFMLALT, UNSPEC_BFMMLA): New unspecs.
	(sve_fp_op): Handle them.
	(SVE_BFLOAT_TERNARY_LONG): New int itertor.
	(SVE_BFLOAT_TERNARY_LONG_LANE): Likewise.

2020-01-31  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/arm_sve.h: Include arm_bf16.h.
	* config/aarch64/aarch64-modes.def (BF): Move definition before
	VECTOR_MODES.  Remove separate VECTOR_MODES for V4BF and V8BF.
	(SVE_MODES): Handle BF modes.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
	BF modes.
	(aarch64_full_sve_mode): Likewise.
	* config/aarch64/iterators.md (SVE_STRUCT): Add VNx16BF, VNx24BF
	and VNx32BF.
	(SVE_FULL, SVE_FULL_HSD, SVE_ALL): Add VNx8BF.
	(Vetype, Vesize, Vctype, VEL, Vel, VEL_INT, V128, v128, vwcore)
	(V_INT_EQUIV, v_int_equiv, V_FP_EQUIV, v_fp_equiv, vector_count)
	(insn_length, VSINGLE, vsingle, VPRED, vpred, VDOUBLE): Handle the
	new SVE BF modes.
	* config/aarch64/aarch64-sve-builtins.h (TYPE_bfloat): New
	type_class_index.
	* config/aarch64/aarch64-sve-builtins.cc (TYPES_all_arith): New macro.
	(TYPES_all_data): Add bf16.
	(TYPES_reinterpret1, TYPES_reinterpret): Likewise.
	(register_tuple_type): Increase buffer size.
	* config/aarch64/aarch64-sve-builtins.def (svbfloat16_t): New type.
	(bf16): New type suffix.
	* config/aarch64/aarch64-sve-builtins-base.def (svabd, svadd, svaddv)
	(svcmpeq, svcmpge, svcmpgt, svcmple, svcmplt, svcmpne, svmad, svmax)
	(svmaxv, svmin, svminv, svmla, svmls, svmsb, svmul, svsub, svsubr):
	Change type from all_data to all_arith.
	* config/aarch64/aarch64-sve-builtins-sve2.def (svaddp, svmaxp)
	(svminp): Likewise.

2020-01-31  Dennis Zhang  <dennis.zhang@arm.com>
	    Matthew Malcomson  <matthew.malcomson@arm.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi (f32mm): Document new AArch64 -march= extension.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_SVE_MATMUL_INT8, __ARM_FEATURE_SVE_MATMUL_FP32 and
	__ARM_FEATURE_SVE_MATMUL_FP64 as appropriate.  Don't define
	__ARM_FEATURE_MATMUL_FP64.
	* config/aarch64/aarch64-option-extensions.def (fp, simd, fp16)
	(sve): Add AARCH64_FL_F32MM to the list of extensions that should
	be disabled at the same time.
	(f32mm): New extension.
	* config/aarch64/aarch64.h (AARCH64_FL_F32MM): New macro.
	(AARCH64_FL_F64MM): Bump to the next bit up.
	(AARCH64_ISA_F32MM, TARGET_SVE_I8MM, TARGET_F32MM, TARGET_SVE_F32MM)
	(TARGET_SVE_F64MM): New macros.
	* config/aarch64/iterators.md (SVE_MATMULF): New mode iterator.
	(UNSPEC_FMMLA, UNSPEC_SMATMUL, UNSPEC_UMATMUL, UNSPEC_USMATMUL)
	(UNSPEC_TRN1Q, UNSPEC_TRN2Q, UNSPEC_UZP1Q, UNSPEC_UZP2Q, UNSPEC_ZIP1Q)
	(UNSPEC_ZIP2Q): New unspeccs.
	(DOTPROD_US_ONLY, PERMUTEQ, MATMUL, FMMLA): New int iterators.
	(optab, sur, perm_insn): Handle the new unspecs.
	(sve_fp_op): Handle UNSPEC_FMMLA.  Resort.
	* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): Use
	TARGET_SVE_F64MM instead of separate tests.
	(@aarch64_<DOTPROD_US_ONLY:sur>dot_prod<vsi2qi>): New pattern.
	(@aarch64_<DOTPROD_US_ONLY:sur>dot_prod_lane<vsi2qi>): Likewise.
	(@aarch64_sve_add_<MATMUL:optab><vsi2qi>): Likewise.
	(@aarch64_sve_<FMMLA:sve_fp_op><mode>): Likewise.
	(@aarch64_sve_<PERMUTEQ:optab><mode>): Likewise.
	* config/aarch64/aarch64-sve-builtins.cc (TYPES_s_float): New macro.
	(TYPES_s_float_hsd_integer, TYPES_s_float_sd_integer): Use it.
	(TYPES_s_signed): New macro.
	(TYPES_s_integer): Use it.
	(TYPES_d_float): New macro.
	(TYPES_d_data): Use it.
	* config/aarch64/aarch64-sve-builtins-shapes.h (mmla): Declare.
	(ternary_intq_uintq_lane, ternary_intq_uintq_opt_n, ternary_uintq_intq)
	(ternary_uintq_intq_lane, ternary_uintq_intq_opt_n): Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (mmla_def): New class.
	(svmmla): New shape.
	(ternary_resize2_opt_n_base): Add TYPE_CLASS2 and TYPE_CLASS3
	template parameters.
	(ternary_resize2_lane_base): Likewise.
	(ternary_resize2_base): New class.
	(ternary_qq_lane_base): Likewise.
	(ternary_intq_uintq_lane_def): Likewise.
	(ternary_intq_uintq_lane): New shape.
	(ternary_intq_uintq_opt_n_def): New class
	(ternary_intq_uintq_opt_n): New shape.
	(ternary_qq_lane_def): Inherit from ternary_qq_lane_base.
	(ternary_uintq_intq_def): New class.
	(ternary_uintq_intq): New shape.
	(ternary_uintq_intq_lane_def): New class.
	(ternary_uintq_intq_lane): New shape.
	(ternary_uintq_intq_opt_n_def): New class.
	(ternary_uintq_intq_opt_n): New shape.
	* config/aarch64/aarch64-sve-builtins-base.h (svmmla, svsudot)
	(svsudot_lane, svtrn1q, svtrn2q, svusdot, svusdot_lane, svusmmla)
	(svuzp1q, svuzp2q, svzip1q, svzip2q): Declare.
	* config/aarch64/aarch64-sve-builtins-base.cc (svdot_lane_impl):
	Generalize to...
	(svdotprod_lane_impl): ...this new class.
	(svmmla_impl, svusdot_impl): New classes.
	(svdot_lane): Update to use svdotprod_lane_impl.
	(svmmla, svsudot, svsudot_lane, svtrn1q, svtrn2q, svusdot)
	(svusdot_lane, svusmmla, svuzp1q, svuzp2q, svzip1q, svzip2q): New
	functions.
	* config/aarch64/aarch64-sve-builtins-base.def (svmmla): New base
	function, with no types defined.
	(svmmla, svusmmla, svsudot, svsudot_lane, svusdot, svusdot_lane): New
	AARCH64_FL_I8MM functions.
	(svmmla): New AARCH64_FL_F32MM function.
	(svld1ro): Depend only on AARCH64_FL_F64MM, not on AARCH64_FL_V8_6.
	(svmmla, svtrn1q, svtrn2q, svuz1q, svuz2q, svzip1q, svzip2q): New
	AARCH64_FL_F64MM function.
	(REQUIRED_EXTENSIONS):

2020-01-31  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (addv64di3_exec): Allow one '0' in each
	alternative only.

2020-01-31  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*movoi_internal_avx): Do not check for
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.  Remove MODE_V8SF handling.
	(*movti_internal): Do not check for
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.
	(*movtf_internal): Move check for TARGET_SSE2 and size optimization
	just after check for TARGET_AVX.
	(*movdf_internal): Ditto.
	* config/i386/mmx.md (*mov<mode>_internal): Do not check for
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.
	* config/i386/sse.md (mov<mode>_internal): Only check
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL with V2DFmode.  Move check
	for TARGET_SSE2 and size optimization just after check for TARGET_AVX.
	(<sse>_andnot<mode>3<mask_name>): Move check for
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL after check for TARGET_AVX.
	(<code><mode>3<mask_name>): Ditto.
	(*andnot<mode>3): Ditto.
	(*andnottf3): Ditto.
	(*<code><mode>3): Ditto.
	(*<code>tf3): Ditto.
	(*andnot<VI:mode>3): Remove
	TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL handling.
	(<mask_codefor><code><VI48_AVX_AVX512F:mode>3<mask_name>): Ditto.
	(*<code><VI12_AVX_AVX512F:mode>3): Ditto.
	(sse4_1_blendv<ssemodesuffix>): Ditto.
	* config/i386/x86-tune.def (X86_TUNE_SSE_UNALIGNED_STORE_OPTIMAL):
	Explain that tune applies to 128bit instructions only.

2020-01-31  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/mkoffload.c (process_asm): Add sgpr_count and vgpr_count
	to definition of hsa_kernel_description.  Parse assembly to find SGPR
	and VGPR count of kernel and store in hsa_kernel_description.

2020-01-31  Tamar Christina  <tamar.christina@arm.com>

	PR rtl-optimization/91838
	* simplify-rtx.c (simplify_binary_operation_1): Update LSHIFTRT case
	to truncate if allowed or reject combination.

2020-01-31  Andrew Stubbs  <ams@codesourcery.com>

	* tree-ssa-loop-ivopts.c (get_iv): Use sizetype for zero-step.
	(find_inv_vars_cb): Likewise.

2020-01-31  David Malcolm  <dmalcolm@redhat.com>

	* calls.c (special_function_p): Split out the check for DECL_NAME
	being non-NULL and fndecl being extern at file scope into a
	new maybe_special_function_p and call it.  Drop check for fndecl
	being non-NULL that was after a usage of DECL_NAME (fndecl).
	* tree.h (maybe_special_function_p): New inline function.

2020-01-30  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (gather<mode>_exec): Move contents ...
	(mask_gather_load<mode>): ... here, and zero-initialize the
	destination.
	(maskload<mode>di): Zero-initialize the destination.
	* config/gcn/gcn.c:

2020-01-30  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93356
	* doc/analyzer.texi (Limitations): Note that constraints on
	floating-point values are currently ignored.

2020-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR lto/93384
	* symtab.c (symtab_node::noninterposable_alias): If localalias
	already exists, but is not usable, append numbers after it until
	a unique name is found.  Formatting fix.

	PR middle-end/93505
	* combine.c (simplify_comparison) <case ROTATE>: Punt on out of range
	rotate counts.

2020-01-30  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (print_operand): Handle LTGT.
	* config/gcn/predicates.md (gcn_fp_compare_operator): Allow ltgt.

2020-01-30  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): Wrap VECTOR_CST
	and CONSTRUCTOR in _Literal (type) with TDF_GIMPLE.

2020-01-30  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_elf_select_rtx_section): Place function pointers
	without a DECL in .data.rel.ro.local.

2020-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/93494
	* config/arm/arm.md (uaddvdi4): Actually emit what gen_uaddvsi4
	returned.

	PR target/91824
	* config/i386/sse.md
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_zext): Renamed to ...
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_<u>ext): ... this.  Use
	any_extend code iterator instead of always zero_extend.
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_zext_lt): Renamed to ...
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_<u>ext_lt): ... this.
	Use any_extend code iterator instead of always zero_extend.
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_zext_shift): Renamed to ...
	(*<sse>_movmsk<ssemodesuffix><avxsizesuffix>_<u>ext_shift): ... this.
	Use any_extend code iterator instead of always zero_extend.
	(*sse2_pmovmskb_ext): New define_insn.
	(*sse2_pmovmskb_ext_lt): New define_insn_and_split.

	PR target/91824
	* config/i386/i386.md (*popcountsi2_zext): New define_insn_and_split.
	(*popcountsi2_zext_falsedep): New define_insn.

2020-01-30  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config.in: Regenerated.
	* configure: Regenerated.

2020-01-29  Tobias Burnus  <tobias@codesourcery.com>

	PR bootstrap/93409
	* config/gcn/gcn-hsa.h (ASM_SPEC): Add -mattr=-code-object-v3 as
	LLVM's assembler changed the default in version 9.

2020-01-24  Jeff Law  <law@redhat.com>

	PR tree-optimization/89689
	* builtins.def (BUILT_IN_OBJECT_SIZE): Make it const rather than pure.

2020-01-29  Richard Sandiford  <richard.sandiford@arm.com>

	Revert:

	2020-01-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/87763
	* simplify-rtx.c (simplify_truncation): Extend sign/zero_extract
	simplification to handle subregs as well as bare regs.
	* config/i386/i386.md (*testqi_ext_3): Match QI extracts too.

2020-01-29  Joel Hutton  <Joel.Hutton@arm.com>

	PR target/93221
	* ira.c (ira): Revert use of simplified LRA algorithm.

2020-01-29  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/92706
	* tree-sra.c (struct access): Fields first_link, last_link,
	next_queued and grp_queued renamed to first_rhs_link, last_rhs_link,
	next_rhs_queued and grp_rhs_queued respectively, new fields
	first_lhs_link, last_lhs_link, next_lhs_queued and grp_lhs_queued.
	(struct assign_link): Field next renamed to next_rhs, new field
	next_lhs.  Updated comment.
	(work_queue_head): Renamed to rhs_work_queue_head.
	(lhs_work_queue_head): New variable.
	(add_link_to_lhs): New function.
	(relink_to_new_repr): Also relink LHS lists.
	(add_access_to_work_queue): Renamed to add_access_to_rhs_work_queue.
	(add_access_to_lhs_work_queue): New function.
	(pop_access_from_work_queue): Renamed to
	pop_access_from_rhs_work_queue.
	(pop_access_from_lhs_work_queue): New function.
	(build_accesses_from_assign): Also add links to LHS lists and to LHS
	work_queue.
	(child_would_conflict_in_lacc): Renamed to
	child_would_conflict_in_acc.  Adjusted parameter names.
	(create_artificial_child_access): New parameter set_grp_read, use it.
	(subtree_mark_written_and_enqueue): Renamed to
	subtree_mark_written_and_rhs_enqueue.
	(propagate_subaccesses_across_link): Renamed to
	propagate_subaccesses_from_rhs.
	(propagate_subaccesses_from_lhs): New function.
	(propagate_all_subaccesses): Also propagate subaccesses from LHSs to
	RHSs.

2020-01-29  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/92706
	* tree-sra.c (struct access): Adjust comment of
	grp_total_scalarization.
	(find_access_in_subtree): Look for single children spanning an entire
	access.
	(scalarizable_type_p): Allow register accesses, adjust callers.
	(completely_scalarize): Remove function.
	(scalarize_elem): Likewise.
	(create_total_scalarization_access): Likewise.
	(sort_and_splice_var_accesses): Do not track total scalarization
	flags.
	(analyze_access_subtree): New parameter totally, adjust to new meaning
	of grp_total_scalarization.
	(analyze_access_trees): Pass new parameter to analyze_access_subtree.
	(can_totally_scalarize_forest_p): New function.
	(create_total_scalarization_access): Likewise.
	(create_total_access_and_reshape): Likewise.
	(total_should_skip_creating_access): Likewise.
	(totally_scalarize_subtree): Likewise.
	(analyze_all_variable_accesses): Perform total scalarization after
	subaccess propagation using the new functions above.
	(initialize_constant_pool_replacements): Output initializers by
	traversing the access tree.

2020-01-29  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (verify_sra_access_forest): New function.
	(verify_all_sra_access_forests): Likewise.
	(create_artificial_child_access): Set parent.
	(analyze_all_variable_accesses): Call the verifier.

2020-01-28  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_edge::resolve_speculation): Only lookup direct edge
	if called on indirect edge.
	(cgraph_edge::redirect_call_stmt_to_callee): Lookup indirect edge of
	speculative call if needed.

2020-01-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93428
	* tree-vect-slp.c (vect_build_slp_tree_2): Compute the load
	permutation when the load node is created.
	(vect_analyze_slp_instance): Re-use it here.

2020-01-28  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (update_indirect_edges_after_inlining): Fix warning.

2020-01-28  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/93272
	* ira-lives.c (process_out_of_region_eh_regs): New function.
	(process_bb_node_lives): Call it.

2020-01-28  Jan Hubicka  <hubicka@ucw.cz>

	* coverage.c (read_counts_file): Make error message lowercase.

2020-01-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_quality_display_names): Fix ordering.

2020-01-28  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318	
	* cgraph.c (cgraph_add_edge_to_call_site_hash): Update call site
	hash only when edge is first within the sequence.
	(cgraph_edge::set_call_stmt): Update handling of speculative calls.
	(symbol_table::create_edge): Do not set target_prob.
	(cgraph_edge::remove_caller): Watch for speculative calls when updating
	the call site hash.
	(cgraph_edge::make_speculative): Drop target_prob parameter.
	(cgraph_edge::speculative_call_info): Remove.
	(cgraph_edge::first_speculative_call_target): New member function.
	(update_call_stmt_hash_for_removing_direct_edge): New function.
	(cgraph_edge::resolve_speculation): Rewrite to new API.
	(cgraph_edge::speculative_call_for_target): New member function.
	(cgraph_edge::make_direct): Rewrite to new API; fix handling of
	multiple speculation targets.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise; fix updating
	of profile.
	(verify_speculative_call): Verify that targets form an interval.
	* cgraph.h (cgraph_edge::speculative_call_info): Remove.
	(cgraph_edge::first_speculative_call_target): New member function.
	(cgraph_edge::next_speculative_call_target): New member function.
	(cgraph_edge::speculative_call_target_ref): New member function.
	(cgraph_edge;:speculative_call_indirect_edge): New member funtion.
	(cgraph_edge): Remove target_prob.
	* cgraphclones.c (cgraph_node::set_call_stmt_including_clones):
	Fix handling of speculative calls.
	* ipa-devirt.c (ipa_devirt): Fix handling of speculative cals.
	* ipa-fnsummary.c (analyze_function_body): Likewise.
	* ipa-inline.c (speculation_useful_p): Use new speculative call API.
	* ipa-profile.c (dump_histogram): Fix formating.
	(ipa_profile_generate_summary): Watch for overflows.
	(ipa_profile): Do not require probablity to be 1/2; update to new API.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Update to new API.
	(update_indirect_edges_after_inlining): Update to new API.
	* ipa-utils.c (ipa_merge_profiles): Rewrite merging of speculative call
	profiles.
	* profile-count.h: (profile_probability::adjusted): New.
	* tree-inline.c (copy_bb): Update to new speculative call API; fix
	updating of profile.
	* value-prof.c (gimple_ic_transform): Rename to ...
	(dump_ic_profile): ... this one; update dumping.
	(stream_in_histogram_value): Fix formating.
	(gimple_value_profile_transformations): Update.

2020-01-28  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/91461
	* config/i386/i386.md (*movoi_internal_avx): Remove
	TARGET_SSE_TYPELESS_STORES check.
	(*movti_internal): Prefer TARGET_AVX over
	TARGET_SSE_TYPELESS_STORES.
	(*movtf_internal): Likewise.
	* config/i386/sse.md (mov<mode>_internal): Prefer TARGET_AVX over
	TARGET_SSE_TYPELESS_STORES.  Remove "<MODE_SIZE> == 16" check
	from TARGET_SSE_TYPELESS_STORES.

2020-01-28  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-core.h (warning_at): Rename overload to...
	(warning_meta): ...this.
	(emit_diagnostic_valist): Delete decl of overload taking
	diagnostic_metadata.
	* diagnostic.c (emit_diagnostic_valist): Likewise for defn.
	(warning_at): Rename overload taking diagnostic_metadata to...
	(warning_meta): ...this.

2020-01-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93439
	* tree-parloops.c (create_loop_fn): Move clique bookkeeping...
	* tree-cfg.c (move_sese_region_to_fn): ... here.
	(verify_types_in_gimple_reference): Verify used cliques are
	tracked.

2020-01-28  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/91399
	* config/i386/i386-options.c (set_ix86_tune_features): Add an
	argument of a pointer to struct gcc_options and pass it to
	parse_mtune_ctrl_str.
	(ix86_function_specific_restore): Pass opts to
	set_ix86_tune_features.
	(ix86_option_override_internal): Likewise.
	(parse_mtune_ctrl_str): Add an argument of a pointer to struct
	gcc_options and use it for x_ix86_tune_ctrl_string.

2020-01-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/87763
	* simplify-rtx.c (simplify_truncation): Extend sign/zero_extract
	simplification to handle subregs as well as bare regs.
	* config/i386/i386.md (*testqi_ext_3): Match QI extracts too.

2020-01-28  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Fail gracefully
	for reduction chains that (now) include a call.

2020-01-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92822
	* tree-ssa-forwprop.c (simplify_vector_constructor): When filling
	out the don't-care elements of a vector whose significant elements
	are duplicates, make the don't-care elements duplicates too.

2020-01-28  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/93434
	* tree-predcom.c (split_data_refs_to_components): Record which
	components have had aliasing loads removed.  Prevent store-store
	commoning for all such components.

2020-01-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/93418
	* config/i386/i386.c (ix86_fold_builtin) <do_shift>: If mask is not
	-1 or is_vshift is true, use new_vector with number of elts npatterns
	rather than new_unary_operation.

	PR tree-optimization/93454
	* gimple-fold.c (fold_array_ctor_reference): Perform
	elt_size.to_uhwi () just once, instead of calling it in every
	iteration.  Punt if that value is above size of the temporary
	buffer.  Decrease third native_encode_expr argument when
	bufoff + elt_sz is above size of buf.

2020-01-27  Joseph Myers  <joseph@codesourcery.com>

	* config/mips/mips.c (mips_declare_object_name)
	[USE_GNU_UNIQUE_OBJECT]: Support use of gnu_unique_object.

2020-01-27  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/93403
	* tree-profile.c (gimple_init_gcov_profiler): Generate
	both __gcov_indirect_call_profiler_v4 and
	__gcov_indirect_call_profiler_v4_atomic.

2020-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/92822
	* config/aarch64/aarch64-simd.md (aarch64_get_half<mode>): New
	expander.
	(@aarch64_split_simd_mov<mode>): Use it.
	(aarch64_simd_mov_from_<mode>low): Add a GPR alternative.
	Leave the vec_extract patterns to handle 2-element vectors.
	(aarch64_simd_mov_from_<mode>high): Likewise.
	(vec_extract<VQMOV_NO2E:mode><Vhalf>): New expander.
	(vec_extractv2dfv1df): Likewise.

2020-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_if_then_else_costs): Match
	jump conditions for *compare_condjump<GPI:mode>.

2020-01-27  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93276
	* digraph.cc (test_edge::test_edge): Specify template for base
	class initializer.

2020-01-27  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_rtx_costs): Update mul64 cost.

2020-01-27  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (gen_mlo): Remove.
	(gen_mhi): Likewise.
	* config/arc/arc.c (AUX_MULHI): Define.
	(arc_must_save_reister): Special handling for r58/59.
	(arc_compute_frame_size): Consider mlo/mhi registers.
	(arc_save_callee_saves): Emit fp/sp move only when emit_move
	paramter is true.
	(arc_conditional_register_usage): Remove TARGET_BIG_ENDIAN from
	mlo/mhi name selection.
	(arc_restore_callee_saves): Don't early restore blink when ISR.
	(arc_expand_prologue): Add mlo/mhi saving.
	(arc_expand_epilogue): Add mlo/mhi restoring.
	(gen_mlo): Remove.
	(gen_mhi): Remove.
	* config/arc/arc.h (DBX_REGISTER_NUMBER): Correct register
	numbering when MUL64 option is used.
	(DWARF2_FRAME_REG_OUT): Define.
	* config/arc/arc.md (arc600_stall): New pattern.
	(VUNSPEC_ARC_ARC600_STALL): Define.
	(mulsi64): Use correct mlo/mhi registers.
	(mulsi_600): Clean it up.
	* config/arc/predicates.md (mlo_operand): Remove any dependency on
	TARGET_BIG_ENDIAN.
	(mhi_operand): Likewise.

2020-01-27  Claudiu Zissulescu  <claziss@synopsys.com>
	    Petro Karashchenko  <petro.karashchenko@ring.com>

	* config/arc/arc.c (arc_is_uncached_mem_p): Check struct
	attributes if needed.
	(prepare_move_operands): Generate special unspec instruction for
	direct access.
	(arc_isuncached_mem_p): Propagate uncached attribute to each
	structure member.
	* config/arc/arc.md (VUNSPEC_ARC_LDDI): Define.
	(VUNSPEC_ARC_STDI): Likewise.
	(ALLI): New mode iterator.
	(mALLI): New mode attribute.
	(lddi): New instruction pattern.
	(stdi): Likewise.
	(stdidi_split): Split instruction for architectures which are not
	supporting ll64 option.
	(lddidi_split): Likewise.

2020-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/92989
	* lra-lives.c (process_bb_lives): Update the live-in set before
	processing additional clobbers.

2020-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/93170
	* cselib.c (cselib_invalidate_regno_val): New function, split out
	from...
	(cselib_invalidate_regno): ...here.
	(cselib_invalidated_by_call_p): New function.
	(cselib_process_insn): Iterate over all the hard-register entries in
	REG_VALUES and invalidate any that cross call-clobbered registers.

2020-01-27  Richard Sandiford  <richard.sandiford@arm.com>

	* dojump.c (split_comparison): Use HONOR_NANS rather than
	HONOR_SNANS when splitting LTGT.

2020-01-27  Martin Liska  <mliska@suse.cz>

	PR driver/91220
	* opts.c (print_filtered_help): Exclude language-specific
	options from --help=common unless enabled in all FEs.

2020-01-27  Martin Liska  <mliska@suse.cz>

	* opts.c (print_help): Exclude params from
	all except --help=param.

2020-01-27  Martin Liska  <mliska@suse.cz>

	PR target/93274
	* config/i386/i386-features.c (make_resolver_func):
	Align the code with ppc64 target implementation.
	Do not generate a unique name for resolver function.

2020-01-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93397
	* tree-vect-slp.c (vect_analyze_slp_instance): Delay
	converted reduction chain SLP graph adjustment.

2020-01-26  Marek Polacek  <polacek@redhat.com>

	PR sanitizer/93436
	* sanopt.c (sanitize_rewrite_addressable_params): Avoid crash on
	null DECL_NAME.

2020-01-26  Jason Merrill  <jason@redhat.com>

	PR c++/92601
	* tree.c (verify_type_variant): Only verify TYPE_NEEDS_CONSTRUCTING
	of complete types.

2020-01-26  Darius Galis  <darius.galis@cyberthorstudios.com>

	* config/rx/rx.md (setmemsi): Added rx_allow_string_insns constraint
	(rx_setmem): Likewise.

2020-01-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/93412
	* config/i386/i386.md (*addv<dwi>4_doubleword, *subv<dwi>4_doubleword):
	Use nonimmediate_operand instead of x86_64_hilo_general_operand and
	drop <di> from constraint of last operand.

	PR target/93430
	* config/i386/sse.md (*avx_vperm_broadcast_<mode>): Disallow for
	TARGET_AVX2 and V4DFmode not in the split condition, but in the
	pattern condition, though allow { 0, 0, 0, 0 } broadcast always.

2020-01-25  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93166
	* ipa-cp.c (get_info_about_necessary_edges): Remove value
	check assertion.

2020-01-24  Jeff Law  <law@redhat.com>

	PR tree-optimization/92788
	* tree-ssa-threadedge.c (thread_across_edge): Check EDGE_COMPLEX
	not EDGE_ABNORMAL.

2020-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/93395
	* config/i386/sse.md (*avx_vperm_broadcast_v4sf,
	*avx_vperm_broadcast_<mode>,
	<sse2_avx_avx512f>_vpermil<mode><mask_name>,
	*<sse2_avx_avx512f>_vpermilp<mode><mask_name>):
	Move before avx2_perm<mode>/avx512f_perm<mode>.

	PR target/93376
	* simplify-rtx.c (simplify_const_unary_operation,
	simplify_const_binary_operation): Punt for mode precision above
	MAX_BITSIZE_MODE_ANY_INT.

2020-01-24  Andrew Pinski  <apinski@marvell.com>

	* config/arm/aarch-cost-tables.h (cortexa57_extra_costs): Change
	alu.shift_reg to 0.

2020-01-24  Jeff Law  <law@redhat.com>

	PR target/13721
	* config/h8300/h8300.c (h8300_print_operand): Only call byte_reg
	for REGs.  Call output_operand_lossage to get more reasonable
	diagnostics.

2020-01-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (vec_cmp<mode>di): Use
	gcn_fp_compare_operator.
	(vec_cmpu<mode>di): Use gcn_compare_operator.
	(vec_cmp<u>v64qidi): Use gcn_compare_operator.
	(vec_cmp<mode>di_exec): Use gcn_fp_compare_operator.
	(vec_cmpu<mode>di_exec): Use gcn_compare_operator.
	(vec_cmp<u>v64qidi_exec): Use gcn_compare_operator.
	(vec_cmp<mode>di_dup): Use gcn_fp_compare_operator.
	(vec_cmp<mode>di_dup_exec): Use gcn_fp_compare_operator.
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>): Use
	gcn_fp_compare_operator.
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>_exec): Use
	gcn_fp_compare_operator.
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>): Use
	gcn_fp_compare_operator.
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>_exec): Use
	gcn_fp_compare_operator.

2020-01-24  Maciej W. Rozycki  <macro@wdc.com>

	* doc/install.texi (Cross-Compiler-Specific Options): Document
	`--with-toolexeclibdir' option.

2020-01-24  Hans-Peter Nilsson  <hp@axis.com>

	* target.def (flags_regnum): Also mention effect on delay slot filling.
	* doc/tm.texi: Regenerate.

2020-01-23  Jeff Law  <law@redhat.com>

	PR translation/90162
	* config/h8300/h8300.c (h8300_option_override): Fix diagnostic text.

2020-01-23  Mikael Tillenius  <mti-1@tillenius.com>

	PR target/92269
	* config/h8300/h8300.h (FUNCTION_PROFILER): Fix emission of
	profiling label

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/93402
	* postreload.c (reload_combine_recognize_pattern): Don't try to adjust
	USE insns.

2020-01-23  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config.in: Regenerated.
	* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
	for TARGET_LIBC_GNUSTACK.
	* configure: Regenerated.
	* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
	found to be 2.31 or greater.

2020-01-23  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to
	TARGET_SOFT_FLOAT.
	* config/mips/mips.c (TARGET_ASM_FILE_END): Define to ...
	(mips_asm_file_end): New function. Delegate to
	file_end_indicate_exec_stack if NEED_INDICATE_EXEC_STACK is true.
	* config/mips/mips.h (NEED_INDICATE_EXEC_STACK): Define to 0.

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/93376
	* config/i386/i386-modes.def (POImode): New mode.
	(MAX_BITSIZE_MODE_ANY_INT): Change from 128 to 160.
	* config/i386/i386.md (DPWI): New mode attribute.
	(addv<mode>4, subv<mode>4): Use <DPWI> instead of <DWI>.
	(QWI): Rename to...
	(QPWI): ... this.  Use POI instead of OI for TImode.
	(*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1,
	*subv<dwi>4_doubleword, *subv<dwi>4_doubleword_1): Use <QPWI>
	instead of <QWI>.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/93341
	* config/aarch64/aarch64.md (UNSPEC_SPECULATION_TRACKER_REV): New
	unspec.
	(speculation_tracker_rev): New pattern.
	* config/aarch64/aarch64-speculation.cc (aarch64_do_track_speculation):
	Use speculation_tracker_rev to track the inverse condition.

2020-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93381
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Take
	alias-set of the def as argument and record the first one.
	(vn_walk_cb_data::first_set): New member.
	(vn_reference_lookup_3): Pass the alias-set of the current def
	to push_partial_def.  Fix alias-set used in the aggregate copy
	case.
	(vn_reference_lookup): Consistently set *last_vuse_ptr.
	* real.c (clear_significand_below): Fix out-of-bound access.

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/93346
	* config/i386/i386.md (*bmi2_bzhi_<mode>3_2, *bmi2_bzhi_<mode>3_3):
	New define_insn patterns.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (check-function-bodies): Add an
	optional target/xfail selector.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/93124
	* auto-inc-dec.c (merge_in_block): Don't add auto inc/decs to
	bare USE and CLOBBER insns.

2020-01-22  Andrew Pinski  <apinski@marvell.com>

	* config/arc/arc.c (output_short_suffix): Check insn for nullness.

2020-01-22  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93307
	* gdbinit.in (break-on-saved-diagnostic): Update for move of
	diagnostic_manager into "ana" namespace.
	* selftest-run-tests.c (selftest::run_tests): Update for move of
	selftest::run_analyzer_selftests to
	ana::selftest::run_analyzer_selftests.

2020-01-22  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgexpand.c (union_stack_vars): Update the size.

2020-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93381
	* tree-ssa-structalias.c (find_func_aliases): Assume offsetting
	throughout, handle all conversions the same.

2020-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/93335
	* config/aarch64/aarch64.c (aarch64_expand_subvti): Only use
	gen_subdi3_compare1_imm if low_in2 satisfies aarch64_plus_immediate
	predicate, not whenever it is CONST_INT.  Otherwise, force_reg it.
	Call force_reg on high_in2 unconditionally.

2020-01-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92924
	* profile.c (compute_value_histograms): Divide
	all counter values.

2020-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/91298
	* output.h (assemble_name_resolve): Declare.
	* varasm.c (assemble_name_resolve): New function.
	(assemble_name): Use it.
	* config/i386/i386.h (ASM_OUTPUT_SYMBOL_REF): Define.

2020-01-22  Joseph Myers  <joseph@codesourcery.com>

	* doc/sourcebuild.texi (Texinfo Manuals, Front End): Refer to
	update_web_docs_git instead of update_web_docs_svn.

2020-01-21  Andrew Pinski  <apinski@marvell.com>

	PR target/9311
	* config/aarch64/aarch64.md (tlsgd_small_<mode>): Have operand 0
	as PTR mode. Have operand 1 as being modeless, it can be P mode.
	(*tlsgd_small_<mode>): Likewise.
	* config/aarch64/aarch64.c (aarch64_load_symref_appropriately)
	<case SYMBOL_SMALL_TLSGD>: Call gen_tlsgd_small_* with a ptr_mode
	register.  Convert that register back to dest using convert_mode.

2020-01-21  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-sr.c (riscv_sr_match_prologue): Use INTVAL
	instead of XINT.

2020-01-21  H.J. Lu  <hongjiu.lu@intel.com>
	    Uros Bizjak    <ubizjak@gmail.com>

	PR target/93319
	* config/i386/i386.c (ix86_tls_module_base): Replace Pmode
	with ptr_mode.
	(legitimize_tls_address): Do GNU2 TLS address computation in
	ptr_mode and zero-extend result to Pmode.
	*  config/i386/i386.md (@tls_dynamic_gnu2_64_<mode>): Replace
	:P with :PTR and Pmode with ptr_mode.
	(*tls_dynamic_gnu2_lea_64_<mode>): Likewise.
	(*tls_dynamic_gnu2_call_64_<mode>): Likewise.
	(*tls_dynamic_gnu2_combine_64_<mode>): Likewise.

2020-01-21  Jakub Jelinek  <jakub@redhat.com>

	PR target/93333
	* config/riscv/riscv.c (riscv_rtx_costs) <case ZERO_EXTRACT>: Verify
	the last two operands are CONST_INT_P before using them as such.

2020-01-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.def: Use get_typenode_from_name
	to get the integer element types.

2020-01-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.h
	(function_expander::convert_to_pmode): Declare.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::convert_to_pmode): New function.
	(function_expander::get_contiguous_base): Use it.
	(function_expander::prepare_gather_address_operands): Likewise.
	* config/aarch64/aarch64-sve-builtins-sve2.cc
	(svwhilerw_svwhilewr_impl::expand): Likewise.

2020-01-21  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/92424
	* config/aarch64/aarch64.c (aarch64_declare_function_name): Set
	cfun->machine->label_is_assembled.
	(aarch64_print_patchable_function_entry): New.
	(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): Define.
	* config/aarch64/aarch64.h (struct machine_function): New field,
	label_is_assembled.

2020-01-21  David Malcolm  <dmalcolm@redhat.com>

	PR ipa/93315
	* ipa-profile.c (ipa_profile): Delete call_sums and set it to
	NULL on exit.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318	
	* cgraph.c (cgraph_edge::resolve_speculation,
	cgraph_edge::redirect_call_stmt_to_callee): Fix update of
	call_stmt_site_hash.

2020-01-21  Martin Liska  <mliska@suse.cz>

	* config/rs6000/rs6000.c (common_mode_defined): Remove
	unused variable.

2020-01-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92328
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Preserve
	type when value-numbering same-sized store by inserting a
	VIEW_CONVERT_EXPR.
	(eliminate_dom_walker::eliminate_stmt): When eliminating
	a redundant store handle bit-reinterpretation of the same value.

2020-01-21  Andrew Pinski  <apinski@marvel.com>

	PR tree-opt/93321
	* tree-into-ssa.c (prepare_block_for_update_1): Split out
	from ...
	(prepare_block_for_update): This.  Use a worklist instead of
	recursing.

2020-01-21  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>

	* config/arm/arm.c (clear_operation_p):
	Initialise last_regno, skip first iteration
	based on the first_set value and use ints instead
	of the unnecessary HOST_WIDE_INTs.

2020-01-21  Jakub Jelinek  <jakub@redhat.com>

	PR target/93073
	* config/rs6000/rs6000.c (rs6000_emit_cmove): If using fsel, punt for
	compare_mode other than SFmode or DFmode.

2020-01-21  Kito Cheng  <kito.cheng@sifive.com>

	PR target/93304
	* config/riscv/riscv-protos.h (riscv_hard_regno_rename_ok): New.
	* config/riscv/riscv.c (riscv_hard_regno_rename_ok): New.
	* config/riscv/riscv.h (HARD_REGNO_RENAME_OK): Defined.

2020-01-20  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (neoversen1_tunings): Set jump_align to 4.

2020-01-20  Andrew Pinski  <apinski@marvell.com>

	PR middle-end/93242
	* targhooks.c (default_print_patchable_function_entry): Use
	output_asm_insn to emit the nop instruction.

2020-01-20  Fangrui Song  <maskray@google.com>

	PR middle-end/93194
	* targhooks.c (default_print_patchable_function_entry): Align to
	POINTER_SIZE.

2020-01-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/93319
	* config/i386/i386.c (legitimize_tls_address): Pass Pmode to
	gen_tls_dynamic_gnu2_64.  Compute GNU2 TLS address in ptr_mode.
	* config/i386/i386.md (tls_dynamic_gnu2_64): Renamed to ...
	(@tls_dynamic_gnu2_64_<mode>): This.  Replace DI with P.
	(*tls_dynamic_gnu2_lea_64): Renamed to ...
	(*tls_dynamic_gnu2_lea_64_<mode>): This.  Replace DI with P.
	Remove the {q} suffix from lea.
	(*tls_dynamic_gnu2_call_64): Renamed to ...
	(*tls_dynamic_gnu2_call_64_<mode>): This.  Replace DI with P.
	(*tls_dynamic_gnu2_combine_64): Renamed to ...
	(*tls_dynamic_gnu2_combine_64_<mode>): This.  Replace DI with P.
	Pass Pmode to gen_tls_dynamic_gnu2_64.

2020-01-20  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.h (SLOW_BYTE_ACCESS): Set to 1.

2020-01-20  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-base.cc
	(svld1ro_impl::memory_vector_mode): Remove parameter name.

2020-01-20  Richard Biener  <rguenther@suse.de>

	PR debug/92763
	* dwarf2out.c (prune_unused_types): Unconditionally mark
	called function DIEs.

2020-01-20  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/93199
	* tree-eh.c (struct leh_state): Add
	new field outer_non_cleanup.
	(cleanup_is_dead_in): Pass leh_state instead
	of eh_region.  Add a checking that state->outer_non_cleanup
	points to outer non-clean up region.
	(lower_try_finally): Record outer_non_cleanup
	for this_state.
	(lower_catch): Likewise.
	(lower_eh_filter): Likewise.
	(lower_eh_must_not_throw): Likewise.
	(lower_cleanup): Likewise.

2020-01-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93094
	* tree-vectorizer.h (vect_loop_versioning): Adjust.
	(vect_transform_loop): Likewise.
	* tree-vectorizer.c (try_vectorize_loop_1): Pass down
	loop_vectorized_call to vect_transform_loop.
	* tree-vect-loop.c (vect_transform_loop): Pass down
	loop_vectorized_call to vect_loop_versioning.
	* tree-vect-loop-manip.c (vect_loop_versioning): Use
	the earlier discovered loop_vectorized_call.

2020-01-19  Eric S. Raymond <esr@thyrsus.com>

	* doc/contribute.texi: Update for SVN -> Git transition.
	* doc/install.texi: Likewise.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318
	* cgraph.c (cgraph_edge::make_speculative): Increase number of
	speculative targets.
	(verify_speculative_call): New function
	(cgraph_node::verify_node): Use it.
	* ipa-profile.c (ipa_profile): Fix formating; do not set number of
	speculations.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318
	* cgraph.c (cgraph_edge::resolve_speculation): Fix foramting.
	(cgraph_edge::make_direct): Remove all indirect targets.
	(cgraph_edge::redirect_call_stmt_to_callee): Use make_direct..
	(cgraph_node::verify_node): Verify that only one call_stmt or
	lto_stmt_uid is set.
	* cgraphclones.c (cgraph_edge::clone): Set only one call_stmt or
	lto_stmt_uid.
	* lto-cgraph.c (lto_output_edge): Simplify streaming of stmt.
	(lto_output_ref): Simplify streaming of stmt.
	* lto-streamer-in.c (fixup_call_stmt_edges_1): Clear lto_stmt_uid.

2020-01-18  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-sve-builtins-base.cc (memory_vector_mode):
	Mark parameter unused.

2020-01-18  Hans-Peter Nilsson  <hp@axis.com>

	* config.gcc <obsolete targets>: Add crisv32-*-* and cris-*-linux*

2019-01-18  Gerald Pfeifer  <gerald@pfeifer.com>

	* varpool.c (ctor_useable_for_folding_p): Fix grammar.

2020-01-18  Iain Sandoe  <iain@sandoe.co.uk>

	* Makefile.in: Add coroutine-passes.o.
	* builtin-types.def (BT_CONST_SIZE): New.
	(BT_FN_BOOL_PTR): New.
	(BT_FN_PTR_PTR_CONST_SIZE_BOOL): New.
	* builtins.def (DEF_COROUTINE_BUILTIN): New.
	* coroutine-builtins.def: New file.
	* coroutine-passes.cc: New file.
	* function.h (struct GTY function): Add a bit to indicate that the
	function is a coroutine component.
	* internal-fn.c (expand_CO_FRAME): New.
	(expand_CO_YIELD): New.
	(expand_CO_SUSPN): New.
	(expand_CO_ACTOR): New.
	* internal-fn.def (CO_ACTOR): New.
	(CO_YIELD): New.
	(CO_SUSPN): New.
	(CO_FRAME): New.
	* passes.def: Add pass_coroutine_lower_builtins,
	pass_coroutine_early_expand_ifns.
	* tree-pass.h (make_pass_coroutine_lower_builtins): New.
	(make_pass_coroutine_early_expand_ifns): New.
	* doc/invoke.texi: Document the fcoroutines command line
	switch.

2020-01-18  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/vfp.md (*clear_vfp_multiple): Remove unused variable.

	PR target/93312
	* config/arm/arm.c (clear_operation_p): Don't use REGNO until
	after checking the argument is a REG.  Don't use REGNO (reg)
	again to set last_regno, reuse regno variable instead.

2020-01-17  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Limitations): Add note about NaN.

2020-01-17  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Sudakshina Das  <sudi.das@arm.com>

	* config/arm/arm.md (ashldi3): Generate thumb2_lsll for both reg
	and valid immediate.
	(ashrdi3): Generate thumb2_asrl for both reg and valid immediate.
	(lshrdi3): Generate thumb2_lsrl for valid immediates.
	* config/arm/constraints.md (Pg): New.
	* config/arm/predicates.md (long_shift_imm): New.
	(arm_reg_or_long_shift_imm): Likewise.
	* config/arm/thumb2.md (thumb2_asrl): New immediate alternative.
	(thumb2_lsll): Likewise.
	(thumb2_lsrl): New.

2020-01-17  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Sudakshina Das  <sudi.das@arm.com>

	* config/arm/arm.md (ashldi3): Generate thumb2_lsll for TARGET_HAVE_MVE.
	(ashrdi3): Generate thumb2_asrl for TARGET_HAVE_MVE.
	* config/arm/arm.c (arm_hard_regno_mode_ok): Allocate even odd
	register pairs for doubleword quantities for ARMv8.1M-Mainline.
	* config/arm/thumb2.md (thumb2_asrl): New.
	(thumb2_lsll): Likewise.

2020-01-17  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/arm.c (cmse_nonsecure_call_inline_register_clear): Remove
	unused variable.

2020-01-17  Alexander Monakov  <amonakov@ispras.ru>

	* gdbinit.in (help-gcc-hooks): New command.
	(pp, pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, ptc, pdn, ptn, pdd, prc,
	pi, pbm, pel, trt): Take $arg0 instead of $ if supplied. Update
	documentation.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): Use the
	correct target macro.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h
	(aarch64_sve_ld1ro_operand_p): New.
	* config/aarch64/aarch64-sve-builtins-base.cc
	(class load_replicate): New.
	(class svld1ro_impl): New.
	(class svld1rq_impl): Change to inherit from load_replicate.
	(svld1ro): New sve intrinsic function base.
	* config/aarch64/aarch64-sve-builtins-base.def (svld1ro):
	New DEF_SVE_FUNCTION.
	* config/aarch64/aarch64-sve-builtins-base.h
	(svld1ro): New decl.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::add_mem_operand): Modify assert to allow
	OImode.
	* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): New
	pattern.
	* config/aarch64/aarch64.c
	(aarch64_sve_ld1rq_operand_p): Implement in terms of ...
	(aarch64_sve_ld1rq_ld1ro_operand_p): This.
	(aarch64_sve_ld1ro_operand_p): New.
	* config/aarch64/aarch64.md (UNSPEC_LD1RO): New unspec.
	* config/aarch64/constraints.md (UOb,UOh,UOw,UOd): New.
	* config/aarch64/predicates.md
	(aarch64_sve_ld1ro_operand_{b,h,w,d}): New.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-c.c (_ARM_FEATURE_MATMUL_FLOAT64):
	Introduce this ACLE specified predefined macro.
	* config/aarch64/aarch64-option-extensions.def (f64mm): New.
	(fp): Disabling this disables f64mm.
	(simd): Disabling this disables f64mm.
	(fp16): Disabling this disables f64mm.
	(sve): Disabling this disables f64mm.
	* config/aarch64/aarch64.h (AARCH64_FL_F64MM): New.
	(AARCH64_ISA_F64MM): New.
	(TARGET_F64MM): New.
	* doc/invoke.texi (f64mm): Document new option.

2020-01-17  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (generic_tunings): Add branch fusion.
	(neoversen1_tunings): Likewise.

2020-01-17  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/92692
	* config/aarch64/aarch64.c (aarch64_split_compare_and_swap)
	Add assert to ensure prolog has been emitted.
	(aarch64_split_atomic_op): Likewise.
	* config/aarch64/atomics.md (aarch64_compare_and_swap<mode>)
	Use epilogue_completed rather than reload_completed.
	(aarch64_atomic_exchange<mode>): Likewise.
	(aarch64_atomic_<atomic_optab><mode>): Likewise.
	(atomic_nand<mode>): Likewise.
	(aarch64_atomic_fetch_<atomic_optab><mode>): Likewise.
	(atomic_fetch_nand<mode>): Likewise.
	(aarch64_atomic_<atomic_optab>_fetch<mode>): Likewise.
	(atomic_nand_fetch<mode>): Likewise.

2020-01-17  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/93133
	* config/aarch64/aarch64.h (REVERSIBLE_CC_MODE): Return false
	for FP modes.
	(REVERSE_CONDITION): Delete.
	* config/aarch64/iterators.md (CC_ONLY): New mode iterator.
	(CCFP_CCFPE): Likewise.
	(e): New mode attribute.
	* config/aarch64/aarch64.md (ccmp<GPI:mode>): Rename to...
	(@ccmp<CC_ONLY:mode><GPI:mode>): ...this, using CC_ONLY instead of CC.
	(fccmp<GPF:mode>, fccmpe<GPF:mode>): Merge into...
	(@ccmp<CCFP_CCFPE:mode><GPF:mode>): ...this combined pattern.
	(@ccmp<CC_ONLY:mode><GPI:mode>_rev): New pattern.
	(@ccmp<CCFP_CCFPE:mode><GPF:mode>_rev): Likewise.
	* config/aarch64/aarch64.c (aarch64_gen_compare_reg): Update
	name of generator from gen_ccmpdi to gen_ccmpccdi.
	(aarch64_gen_ccmp_next): Use code_for_ccmp.  If we want to reverse
	the previous comparison but aren't able to, use the new ccmp_rev
	patterns instead.

2020-01-17  Richard Sandiford  <richard.sandiford@arm.com>

	* gimplify.c (gimplify_return_expr): Use poly_int_tree_p rather
	than testing directly for INTEGER_CST.
	(gimplify_target_expr, gimplify_omp_depend): Likewise.

2020-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93292
	* tree-vect-stmts.c (vectorizable_comparison): Punt also if
	get_vectype_for_scalar_type returns NULL.

2020-01-16  Jan Hubicka  <hubicka@ucw.cz>

	* params.opt (-param=max-predicted-iterations): Increase range from 0.
	* predict.c (estimate_loops): Add 1 to param_max_predicted_iterations.

2020-01-16  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (estimate_calls_size_and_time): Fix formating of
	dump.
	* params.opt: (max-predicted-iterations): Set bounds.
	* predict.c (real_almost_one, real_br_prob_base,
	real_inv_br_prob_base, real_one_half, real_bb_freq_max): Remove.
	(propagate_freq): Add max_cyclic_prob parameter; cap cyclic
	probabilities; do not truncate to reg_br_prob_bases.
	(estimate_loops_at_level): Pass max_cyclic_prob.
	(estimate_loops): Compute max_cyclic_prob.
	(estimate_bb_frequencies): Do not initialize real_*; update calculation
	of back edge prob.
	* profile-count.c (profile_probability::to_sreal): New.
	* profile-count.h (class sreal): Move up in file.
	(profile_probability::to_sreal): Declare.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/arm/arm.c
	(arm_invalid_conversion): New function for target hook.
	(arm_invalid_unary_op): New function for target hook.
	(arm_invalid_binary_op): New function for target hook.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config.gcc: Add arm_bf16.h.
	* config/arm/arm-builtins.c (arm_mangle_builtin_type): Fix comment.
	(arm_simd_builtin_std_type): Add BFmode.
	(arm_init_simd_builtin_types): Define element types for vector types.
	(arm_init_bf16_types): New function.
	(arm_init_builtins): Add arm_init_bf16_types function call.
	* config/arm/arm-modes.def: Add BFmode and V4BF, V8BF vector modes.
	* config/arm/arm-simd-builtin-types.def: Add V4BF, V8BF.
	* config/arm/arm.c (aapcs_vfp_sub_candidate):  Add BFmode.
	(arm_hard_regno_mode_ok): Add BFmode and tidy up statements.
	(arm_vector_mode_supported_p): Add V4BF, V8BF.
	(arm_mangle_type):  Add __bf16.
	* config/arm/arm.h: Add V4BF, V8BF to VALID_NEON_DREG_MODE, 
	VALID_NEON_QREG_MODE respectively. Add export arm_bf16_type_node,
	arm_bf16_ptr_type_node.
	* config/arm/arm.md: Add BFmode to movhf expand, mov pattern and
	define_split between ARM registers.
	* config/arm/arm_bf16.h: New file.
	* config/arm/arm_neon.h: Add arm_bf16.h and Bfloat vector types.
	* config/arm/iterators.md: (ANY64_BF, VDXMOV, VHFBF, HFBF, fporbf): New.
	(VQXMOV): Add V8BF.
	* config/arm/neon.md: Add BF vector types to movhf NEON move patterns.
	* config/arm/vfp.md: Add BFmode to movhf patterns.

2020-01-16  Mihail Ionescu  <mihail.ionescu@arm.com>
	    Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm-cpus.in (mve, mve_float): New features.
	(dsp, mve, mve.fp): New options.
	* config/arm/arm.h (TARGET_HAVE_MVE, TARGET_HAVE_MVE_FLOAT): Define.
	* config/arm/t-rmprofile: Map v8.1-M multilibs to v8-M.
	* doc/invoke.texi: Document the armv8.1-m mve and dps options.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-cpus.in (ARMv8_1m_main): Redefine as an extension to
	Armv8-M Mainline.
	* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Remove
	error for using -mcmse when targeting Armv8.1-M Mainline.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.md (nonsecure_call_internal): Do not force memory
	address in r4 when targeting Armv8.1-M Mainline.
	(nonsecure_call_value_internal): Likewise.
	* config/arm/thumb2.md (nonsecure_call_reg_thumb2): Make memory address
	a register match_operand again.  Emit BLXNS when targeting
	Armv8.1-M Mainline.
	(nonsecure_call_value_reg_thumb2): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (arm_add_cfa_adjust_cfa_note): Declare early.
	(cmse_nonsecure_call_inline_register_clear): Define new lazy_fpclear
	variable as true when floating-point ABI is not hard.  Replace
	check against TARGET_HARD_FLOAT_ABI by checks against lazy_fpclear.
	Generate VLSTM and VLLDM instruction respectively before and
	after a function call to cmse_nonsecure_call function.
	* config/arm/unspecs.md (VUNSPEC_VLSTM): Define unspec.
	(VUNSPEC_VLLDM): Likewise.
	* config/arm/vfp.md (lazy_store_multiple_insn): New define_insn.
	(lazy_load_multiple_insn): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (vfp_emit_fstmd): Declare early.
	(arm_emit_vfp_multi_reg_pop): Likewise.
	(cmse_nonsecure_call_inline_register_clear): Abstract number of VFP
	registers to clear in max_fp_regno.  Emit VPUSH and VPOP to save and
	restore callee-saved VFP registers.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (arm_emit_multi_reg_pop): Declare early.
	(cmse_nonsecure_call_clear_caller_saved): Rename into ...
	(cmse_nonsecure_call_inline_register_clear): This.  Save and clear
	callee-saved GPRs as well as clear ip register before doing a nonsecure
	call then restore callee-saved GPRs after it when targeting
	Armv8.1-M Mainline.
	(arm_reorg): Adapt to function rename.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-protos.h (clear_operation_p): Adapt prototype.
	* config/arm/arm.c (clear_operation_p): Extend to be able to check a
	clear_vfp_multiple pattern based on a new vfp parameter.
	(cmse_clear_registers): Generate VSCCLRM to clear VFP registers when
	targeting Armv8.1-M Mainline.
	(cmse_nonsecure_entry_clear_before_return): Clear VFP registers
	unconditionally when targeting Armv8.1-M Mainline architecture.  Check
	whether VFP registers are available before looking call_used_regs for a
	VFP register.
	* config/arm/predicates.md (clear_multiple_operation): Adapt to change
	of prototype of clear_operation_p.
	(clear_vfp_multiple_operation): New predicate.
	* config/arm/unspecs.md (VUNSPEC_VSCCLRM_VPR): New volatile unspec.
	* config/arm/vfp.md (clear_vfp_multiple): New define_insn.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-protos.h (clear_operation_p): Declare.
	* config/arm/arm.c (clear_operation_p): New function.
	(cmse_clear_registers): Generate clear_multiple instruction pattern if
	targeting Armv8.1-M Mainline or successor.
	(output_return_instruction): Only output APSR register clearing if
	Armv8.1-M Mainline instructions not available.
	(thumb_exit): Likewise.
	* config/arm/predicates.md (clear_multiple_operation): New predicate.
	* config/arm/thumb2.md (clear_apsr): New define_insn.
	(clear_multiple): Likewise.
	* config/arm/unspecs.md (VUNSPEC_CLRM_APSR): New volatile unspec.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (fp_sysreg_names): Declare and define.
	(use_return_insn): Also return false for Armv8.1-M Mainline.
	(output_return_instruction): Skip FPSCR clearing if Armv8.1-M
	Mainline instructions are available.
	(arm_compute_frame_layout): Allocate space in frame for FPCXTNS
	when targeting Armv8.1-M Mainline Security Extensions.
	(arm_expand_prologue): Save FPCXTNS if this is an Armv8.1-M
	Mainline entry function.
	(cmse_nonsecure_entry_clear_before_return): Clear IP and r4 if
	targeting Armv8.1-M Mainline or successor.
	(arm_expand_epilogue): Fix indentation of caller-saved register
	clearing.  Restore FPCXTNS if this is an Armv8.1-M Mainline
	entry function.
	* config/arm/arm.h (TARGET_HAVE_FP_CMSE): New macro.
	(FP_SYSREGS): Likewise.
	(enum vfp_sysregs_encoding): Define enum.
	(fp_sysreg_names): Declare.
	* config/arm/unspecs.md (VUNSPEC_VSTR_VLDR): New volatile unspec.
	* config/arm/vfp.md (push_fpsysreg_insn): New define_insn.
	(pop_fpsysreg_insn): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-cpus.in (armv8_1m_main): New feature.
	(ARMv4, ARMv4t, ARMv5t, ARMv5te, ARMv5tej, ARMv6, ARMv6j, ARMv6k,
	ARMv6z, ARMv6kz, ARMv6zk, ARMv6t2, ARMv6m, ARMv7, ARMv7a, ARMv7ve,
	ARMv7r, ARMv7m, ARMv7em, ARMv8a, ARMv8_1a, ARMv8_2a, ARMv8_3a,
	ARMv8_4a, ARMv8_5a, ARMv8m_base, ARMv8m_main, ARMv8r): Reindent.
	(ARMv8_1m_main): New feature group.
	(armv8.1-m.main): New architecture.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm.c (arm_arch8_1m_main): Define and default initialize.
	(arm_option_reconfigure_globals): Initialize arm_arch8_1m_main.
	(arm_options_perform_arch_sanity_checks): Error out when targeting
	Armv8.1-M Mainline Security Extensions.
	* config/arm/arm.h (arm_arch8_1m_main): Declare.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64-simd-builtins.def (aarch64_bfdot,
	aarch64_bfdot_lane, aarch64_bfdot_laneq): New.
	* config/aarch64/aarch64-simd.md (aarch64_bfdot, aarch64_bfdot_lane,
	aarch64_bfdot_laneq): New.
	* config/aarch64/arm_bf16.h (vbfdot_f32, vbfdotq_f32,
	vbfdot_lane_f32, vbfdotq_lane_f32, vbfdot_laneq_f32,
	vbfdotq_laneq_f32): New.
	* config/aarch64/iterators.md (UNSPEC_BFDOT, Vbfdottype,
	VBFMLA_W, VBF): New.
	(isquadop): Add V4BF, V8BF.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64-builtins.c: (enum aarch64_type_qualifiers):
	New qualifier_lane_quadtup_index, TYPES_TERNOP_SSUS,
	TYPES_QUADOPSSUS_LANE_QUADTUP, TYPES_QUADOPSSSU_LANE_QUADTUP.
	(aarch64_simd_expand_args): Add case SIMD_ARG_LANE_QUADTUP_INDEX.
	(aarch64_simd_expand_builtin): Add qualifier_lane_quadtup_index.
	* config/aarch64/aarch64-simd-builtins.def (usdot, usdot_lane,
	usdot_laneq, sudot_lane,sudot_laneq): New.
	* config/aarch64/aarch64-simd.md (aarch64_usdot): New.
	(aarch64_<sur>dot_lane): New.
	* config/aarch64/arm_neon.h (vusdot_s32): New.
	(vusdotq_s32): New.
	(vusdot_lane_s32): New.
	(vsudot_lane_s32): New.
	* config/aarch64/iterators.md (DOTPROD_I8MM): New iterator.
	(UNSPEC_USDOT, UNSPEC_SUDOT): New unspecs.

2020-01-16  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Fix
	obvious spacing issue.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* tree-ssa-sccvn.c(vn_reference_lookup_3): Check lhs for
	!storage_order_barrier_p.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* sched-int.h (_dep): Add unused bit-field field for the padding.
	* sched-deps.c (init_dep_1): Init unused field.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* optabs.h (create_expand_operand): Initialize target field also.

2020-01-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/92429
	* tree-ssa-loop-niter.h (simplify_replace_tree): Add parameter.
	* tree-ssa-loop-niter.c (simplify_replace_tree): Add parameter to
	control folding.
	* tree-vect-loop.c (update_epilogue_vinfo): Do not fold when replacing
	tree.

2020-01-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_split_sve_subreg_move): Apply
	aarch64_sve_int_mode to each mode.

2020-01-15  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Overview): Add note about
	-fdump-ipa-analyzer.

2020-01-15  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/93231
	* tree-ssa-forwprop.c (optimize_count_trailing_zeroes): Check
	input_type is unsigned.  Use tree_to_shwi for shift constant.
	Check CST_STRING element size is CHAR_TYPE_SIZE bits.
	(simplify_count_trailing_zeroes): Add test to handle known non-zero
	inputs more efficiently.

2020-01-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*movsf_internal): Do not require
	SSE2 ISA for alternatives 14 and 15.

2020-01-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/93273
	* tree-eh.c (sink_clobbers): If we already visited the destination
	block do not defer insertion.
	(pass_lower_eh_dispatch::execute): Maintain BB_VISITED for
	the purpose of defered insertion.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Bump to 10.0.1.

2020-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/93247
	* tree-vect-loop.c (update_epilogue_loop_vinfo): Check the access
	type of the stmt that we're going to vectorize.

2020-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vectorize_slp_instance_root_stmt): Use a
	VIEW_CONVERT_EXPR if the vectorized constructor has a diffeent
	type from the lhs.

2020-01-15  Martin Liska  <mliska@suse.cz>

	* ipa-profile.c (ipa_profile_read_edge_summary): Do not allow
	2 calls of streamer_read_hwi in a function call.

2020-01-15  Richard Biener  <rguenther@suse.de>

	* alias.c (record_alias_subset): Avoid redundant work when
	subset is already recorded.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fdiagnostics-show-cwe): Add note that some of
	the analyzer options provide CWE identifiers.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* tree-diagnostic-path.cc (path_summary::event_range::print):
	When testing for UNKNOWN_LOCATION, look through ad-hoc wrappers
	using get_pure_location.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93262
	* tree-ssa-dse.c (maybe_trim_memstar_call): For *_chk builtins,
	perform head trimming only if the last argument is constant,
	either all ones, or larger or equal to head trim, in the latter
	case decrease the last argument by head_trim.

	PR tree-optimization/93249
	* tree-ssa-dse.c: Include builtins.h and gimple-fold.h.
	(maybe_trim_memstar_call): Move head_trim and tail_trim vars to
	function body scope, reindent.  For BUILTIN_IN_STRNCPY*, don't
	perform head trim unless we can prove there are no '\0' chars
	from the source among the first head_trim chars.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (ANALYZER_OBJS): Add analyzer/function-set.o.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/93009
	* config/i386/sse.md
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1): Use
	just a single alternative instead of two, make operands 1 and 2
	commutative.

2020-01-14  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/91576
	* ipa-devirt.c (odr_types_equivalent_p): Compare TREE_ADDRESSABLE and
	TYPE_MODE.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (lang_opt_files): Add analyzer.opt.
	(ANALYZER_OBJS): New.
	(OBJS): Add digraph.o, graphviz.o, ordered-hash-map-tests.o,
	tristate.o and ANALYZER_OBJS.
	(TEXI_GCCINT_FILES): Add analyzer.texi.
	* common.opt (-fanalyzer): New driver option.
	* config.in: Regenerate.
	* configure: Regenerate.
	* configure.ac (--disable-analyzer, ENABLE_ANALYZER): New option.
	(gccdepdir): Also create depdir for "analyzer" subdir.
	* digraph.cc: New file.
	* digraph.h: New file.
	* doc/analyzer.texi: New file.
	* doc/gccint.texi ("Static Analyzer") New menu item.
	(analyzer.texi): Include it.
	* doc/invoke.texi ("Static Analyzer Options"): New list and new section.
	("Warning Options"): Add static analysis warnings to the list.
	(-Wno-analyzer-double-fclose): New option.
	(-Wno-analyzer-double-free): New option.
	(-Wno-analyzer-exposure-through-output-file): New option.
	(-Wno-analyzer-file-leak): New option.
	(-Wno-analyzer-free-of-non-heap): New option.
	(-Wno-analyzer-malloc-leak): New option.
	(-Wno-analyzer-possible-null-argument): New option.
	(-Wno-analyzer-possible-null-dereference): New option.
	(-Wno-analyzer-null-argument): New option.
	(-Wno-analyzer-null-dereference): New option.
	(-Wno-analyzer-stale-setjmp-buffer): New option.
	(-Wno-analyzer-tainted-array-index): New option.
	(-Wno-analyzer-use-after-free): New option.
	(-Wno-analyzer-use-of-pointer-in-stale-stack-frame): New option.
	(-Wno-analyzer-use-of-uninitialized-value): New option.
	(-Wanalyzer-too-complex): New option.
	(-fanalyzer-call-summaries): New warning.
	(-fanalyzer-checker=): New warning.
	(-fanalyzer-fine-grained): New warning.
	(-fno-analyzer-state-merge): New warning.
	(-fno-analyzer-state-purge): New warning.
	(-fanalyzer-transitivity): New warning.
	(-fanalyzer-verbose-edges): New warning.
	(-fanalyzer-verbose-state-changes): New warning.
	(-fanalyzer-verbosity=): New warning.
	(-fdump-analyzer): New warning.
	(-fdump-analyzer-callgraph): New warning.
	(-fdump-analyzer-exploded-graph): New warning.
	(-fdump-analyzer-exploded-nodes): New warning.
	(-fdump-analyzer-exploded-nodes-2): New warning.
	(-fdump-analyzer-exploded-nodes-3): New warning.
	(-fdump-analyzer-supergraph): New warning.
	* doc/sourcebuild.texi (dg-require-dot): New.
	(dg-check-dot): New.
	* gdbinit.in (break-on-saved-diagnostic): New command.
	* graphviz.cc: New file.
	* graphviz.h: New file.
	* ordered-hash-map-tests.cc: New file.
	* ordered-hash-map.h: New file.
	* passes.def (pass_analyzer): Add before
	pass_ipa_whole_program_visibility.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::ordered_hash_map_tests_cc_tests.
	* selftest.h (selftest::ordered_hash_map_tests_cc_tests): New
	decl.
	* shortest-paths.h: New file.
	* timevar.def (TV_ANALYZER): New timevar.
	(TV_ANALYZER_SUPERGRAPH): Likewise.
	(TV_ANALYZER_STATE_PURGE): Likewise.
	(TV_ANALYZER_PLAN): Likewise.
	(TV_ANALYZER_SCC): Likewise.
	(TV_ANALYZER_WORKLIST): Likewise.
	(TV_ANALYZER_DUMP): Likewise.
	(TV_ANALYZER_DIAGNOSTICS): Likewise.
	(TV_ANALYZER_SHORTEST_PATHS): Likewise.
	* tree-pass.h (make_pass_analyzer): New decl.
	* tristate.cc: New file.
	* tristate.h: New file.

2020-01-14  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/93254
	* config/i386/i386.md (*movsf_internal): Require SSE2 ISA for
	alternatives 9 and 10.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* attribs.c (excl_hash_traits::empty_zero_p): New static constant.
	* gcov.c (function_start_pair_hash::empty_zero_p): Likewise.
	* graphite.c (struct sese_scev_hash::empty_zero_p): Likewise.
	* hash-map-tests.c (selftest::test_nonzero_empty_key): New selftest.
	(selftest::hash_map_tests_c_tests): Call it.
	* hash-map-traits.h (simple_hashmap_traits::empty_zero_p):
	New static constant, using the value of = H::empty_zero_p.
	(unbounded_hashmap_traits::empty_zero_p): Likewise, using the value
	from default_hash_traits <Value>.
	* hash-map.h (hash_map::empty_zero_p): Likewise, using the value
	from Traits.
	* hash-set-tests.c (value_hash_traits::empty_zero_p): Likewise.
	* hash-table.h (hash_table::alloc_entries): Guard the loop of
	calls to mark_empty with !Descriptor::empty_zero_p.
	(hash_table::empty_slow): Conditionalize the memset call with a
	check that Descriptor::empty_zero_p; otherwise, loop through the
	entries calling mark_empty on them.
	* hash-traits.h (int_hash::empty_zero_p): New static constant.
	(pointer_hash::empty_zero_p): Likewise.
	(pair_hash::empty_zero_p): Likewise.
	* ipa-devirt.c (default_hash_traits <type_pair>::empty_zero_p):
	Likewise.
	* ipa-prop.c (ipa_bit_ggc_hash_traits::empty_zero_p): Likewise.
	(ipa_vr_ggc_hash_traits::empty_zero_p): Likewise.
	* profile.c (location_triplet_hash::empty_zero_p): Likewise.
	* sanopt.c (sanopt_tree_triplet_hash::empty_zero_p): Likewise.
	(sanopt_tree_couple_hash::empty_zero_p): Likewise.
	* tree-hasher.h (int_tree_hasher::empty_zero_p): Likewise.
	* tree-ssa-sccvn.c (vn_ssa_aux_hasher::empty_zero_p): Likewise.
	* tree-vect-slp.c (bst_traits::empty_zero_p): Likewise.
	* tree-vectorizer.h
	(default_hash_traits<scalar_cond_masked_key>::empty_zero_p):
	Likewise.

2020-01-14  Kewen Lin  <linkw@gcc.gnu.org>

	* cfgloopanal.c (average_num_loop_insns): Free bbs when early return,
	fix typo on return value.

2020-01-14  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR ipa/69678
	* cgraph.c (symbol_table::create_edge): Init speculative_id and
	target_prob.
	(cgraph_edge::make_speculative): Add param for setting speculative_id
	and target_prob.
	(cgraph_edge::speculative_call_info): Update comments and find reference
	by speculative_id for multiple indirect targets.
	(cgraph_edge::resolve_speculation): Decrease the speculations
	for indirect edge, drop it's speculative if not direct target
	left. Update comments.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise.
	(cgraph_node::dump): Print num_speculative_call_targets.
	(cgraph_node::verify_node): Don't report error if speculative
	edge not include statement.
	(cgraph_edge::num_speculative_call_targets_p): New function.
	* cgraph.h (int common_target_id): Remove.
	(int common_target_probability): Remove.
	(num_speculative_call_targets): New variable.
	(make_speculative): Add param for setting speculative_id.
	(cgraph_edge::num_speculative_call_targets_p): New declare.
	(target_prob): New variable.
	(speculative_id): New variable.
	* ipa-fnsummary.c (analyze_function_body): Create and duplicate
	  call summaries for multiple speculative call targets.
	* cgraphclones.c (cgraph_node::create_clone): Clone speculative_id.
	* ipa-profile.c (struct speculative_call_target): New struct.
	(class speculative_call_summary): New class.
	(class speculative_call_summaries): New class.
	(call_sums): New variable.
	(ipa_profile_generate_summary): Generate indirect multiple targets summaries.
	(ipa_profile_write_edge_summary): New function.
	(ipa_profile_write_summary): Stream out indirect multiple targets summaries.
	(ipa_profile_dump_all_summaries): New function.
	(ipa_profile_read_edge_summary): New function.
	(ipa_profile_read_summary_section): New function.
	(ipa_profile_read_summary): Stream in indirect multiple targets summaries.
	(ipa_profile): Generate num_speculative_call_targets from
	profile summaries.
	* ipa-ref.h (speculative_id): New variable.
	* ipa-utils.c (ipa_merge_profiles): Update with target_prob.
	* lto-cgraph.c (lto_output_edge): Remove indirect common_target_id and
	common_target_probability.   Stream out speculative_id and
	num_speculative_call_targets.
	(input_edge): Likewise.
	* predict.c (dump_prediction): Remove edges count assert to be
	precise.
	* symtab.c (symtab_node::create_reference): Init speculative_id.
	(symtab_node::clone_references): Clone speculative_id.
	(symtab_node::clone_referring): Clone speculative_id.
	(symtab_node::clone_reference): Clone speculative_id.
	(symtab_node::clear_stmts_in_references): Clear speculative_id.
	* tree-inline.c (copy_bb): Duplicate all the speculative edges
	if indirect call contains multiple speculative targets.
	* value-prof.h  (check_ic_target): Remove.
	* value-prof.c  (gimple_value_profile_transformations):
	Use void function gimple_ic_transform.
	* value-prof.c  (gimple_ic_transform): Handle topn case.
	Fix comment typos.  Change it to a void function.

2020-01-13  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64-cores.def (octeontx2): New define.
	(octeontx2t98): New define.
	(octeontx2t96): New define.
	(octeontx2t93): New define.
	(octeontx2f95): New define.
	(octeontx2f95n): New define.
	(octeontx2f95mm): New define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (-mcpu=): Document the new cpu types.

2020-01-13  Jason Merrill  <jason@redhat.com>

	PR c++/33799 - destroy return value if local cleanup throws.
	* gimplify.c (gimplify_return_expr): Handle COMPOUND_EXPR.

2020-01-13  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (get_max_overall_size): Use newly
	renamed param param_ipa_cp_unit_growth.
	* params.opt: Remove legacy param name.

2020-01-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/93213
	* tree-ssa-strlen.c (handle_store): Only allow single-byte nul-over-nul
	stores to be eliminated.

2020-01-13  Martin Liska  <mliska@suse.cz>

	* opts.c (print_help): Do not print CL_PARAM
	and CL_WARNING for CL_OPTIMIZATION.

2020-01-13  Jonathan Wakely  <jwakely@redhat.com>

	PR driver/92757
	* doc/invoke.texi (Warning Options): Add caveat about some warnings
	depending on optimization settings.

2020-01-13  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (simplify_count_trailing_zeroes): Use
	SCALAR_INT_TYPE_MODE directly in CTZ_DEFINED_VALUE_AT_ZERO macro
	argument rather than to initialize temporary for targets that
	don't use the mode argument at all.  Initialize ctzval to avoid
	warning at -O0.

2020-01-10  Thomas Schwinge  <thomas@codesourcery.com>

	* tree.h (OMP_CLAUSE_USE_DEVICE_PTR_IF_PRESENT): New definition.
	* tree-core.h: Document it.
	* gimplify.c (gimplify_omp_workshare): Set it.
	* omp-low.c (lower_omp_target): Use it.
	* tree-pretty-print.c (dump_omp_clause): Print it.

	* omp-low.c (lower_omp_target) <OMP_CLAUSE_USE_DEVICE_PTR etc.>:
	Assert that for OpenACC we always have 'GOMP_MAP_USE_DEVICE_PTR'.

2020-01-10  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (OBJS): Add tree-diagnostic-path.o.
	* common.opt (fdiagnostics-path-format=): New option.
	(diagnostic_path_format): New enum.
	(fdiagnostics-show-path-depths): New option.
	* coretypes.h (diagnostic_event_id_t): New forward decl.
	* diagnostic-color.c (color_dict): Add "path".
	* diagnostic-event-id.h: New file.
	* diagnostic-format-json.cc (json_from_expanded_location): Make
	non-static.
	(json_end_diagnostic): Call context->make_json_for_path if it
	exists and the diagnostic has a path.
	(diagnostic_output_format_init): Clear context->print_path.
	* diagnostic-path.h: New file.
	* diagnostic-show-locus.c (colorizer::set_range): Special-case
	when printing a run of events in a diagnostic_path so that they
	all get the same color.
	(layout::m_diagnostic_path_p): New field.
	(layout::layout): Initialize it.
	(layout::print_any_labels): Don't colorize the label text for an
	event in a diagnostic_path.
	(gcc_rich_location::add_location_if_nearby): Add
	"restrict_to_current_line_spans" and "label" params.  Pass the
	former to layout.maybe_add_location_range; pass the latter
	when calling add_range.
	* diagnostic.c: Include "diagnostic-path.h".
	(diagnostic_initialize): Initialize context->path_format and
	context->show_path_depths.
	(diagnostic_show_any_path): New function.
	(diagnostic_path::interprocedural_p): New function.
	(diagnostic_report_diagnostic): Call diagnostic_show_any_path.
	(simple_diagnostic_path::num_events): New function.
	(simple_diagnostic_path::get_event): New function.
	(simple_diagnostic_path::add_event): New function.
	(simple_diagnostic_event::simple_diagnostic_event): New ctor.
	(simple_diagnostic_event::~simple_diagnostic_event): New dtor.
	(debug): New overload taking a diagnostic_path *.
	* diagnostic.def (DK_DIAGNOSTIC_PATH): New.
	* diagnostic.h (enum diagnostic_path_format): New enum.
	(json::value): New forward decl.
	(diagnostic_context::path_format): New field.
	(diagnostic_context::show_path_depths): New field.
	(diagnostic_context::print_path): New callback field.
	(diagnostic_context::make_json_for_path): New callback field.
	(diagnostic_show_any_path): New decl.
	(json_from_expanded_location): New decl.
	* doc/invoke.texi (-fdiagnostics-path-format=): New option.
	(-fdiagnostics-show-path-depths): New option.
	(-fdiagnostics-color): Add "path" to description of default
	GCC_COLORS; describe it.
	(-fdiagnostics-format=json): Document how diagnostic paths are
	represented in the JSON output format.
	* gcc-rich-location.h (gcc_rich_location::add_location_if_nearby):
	Add optional params "restrict_to_current_line_spans" and "label".
	* opts.c (common_handle_option): Handle
	OPT_fdiagnostics_path_format_ and
	OPT_fdiagnostics_show_path_depths.
	* pretty-print.c: Include "diagnostic-event-id.h".
	(pp_format): Implement "%@" format code for printing
	diagnostic_event_id_t *.
	(selftest::test_pp_format): Add tests for "%@".
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::tree_diagnostic_path_cc_tests.
	* selftest.h (selftest::tree_diagnostic_path_cc_tests): New decl.
	* toplev.c (general_init): Initialize global_dc->path_format and
	global_dc->show_path_depths.
	* tree-diagnostic-path.cc: New file.
	* tree-diagnostic.c (maybe_unwind_expanded_macro_loc): Make
	non-static.  Drop "diagnostic" param in favor of storing the
	original value of "where" and re-using it.
	(virt_loc_aware_diagnostic_finalizer): Update for dropped param of
	maybe_unwind_expanded_macro_loc.
	(tree_diagnostics_defaults): Initialize context->print_path and
	context->make_json_for_path.
	* tree-diagnostic.h (default_tree_diagnostic_path_printer): New
	decl.
	(default_tree_make_json_for_path): New decl.
	(maybe_unwind_expanded_macro_loc): New decl.

2020-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93210
	* fold-const.h (native_encode_initializer,
	can_native_interpret_type_p): Declare.
	* fold-const.c (native_encode_string): Fix up handling with off != -1,
	simplify.
	(native_encode_initializer): New function, moved from dwarf2out.c.
	Adjust to native_encode_expr compatible arguments, including dry-run
	and partial extraction modes.  Don't handle STRING_CST.
	(can_native_interpret_type_p): No longer static.
	* gimple-fold.c (fold_ctor_reference): For native_encode_expr, verify
	offset / BITS_PER_UNIT fits into int and don't call it if
	can_native_interpret_type_p fails.  If suboff is NULL and for
	CONSTRUCTOR fold_{,non}array_ctor_reference returns NULL, retry with
	native_encode_initializer.
	(fold_const_aggregate_ref_1): Formatting fix.
	* dwarf2out.c (native_encode_initializer): Moved to fold-const.c.
	(tree_add_const_value_attribute): Adjust caller.

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (simplify_count_trailing_zeroes): Use
	SCALAR_INT_TYPE_MODE instead of TYPE_MODE as operand of
	CTZ_DEFINED_VALUE_AT_ZERO.

2020-01-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/93027
	* lra-constraints.c (match_reload): Permit input operands have the
	same mode as output while other input operands have a different
	mode.

2020-01-10  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (check_ctz_array): Add new function.
	(check_ctz_string): Likewise.
	(optimize_count_trailing_zeroes): Likewise.
	(simplify_count_trailing_zeroes): Likewise.
	(pass_forwprop::execute): Try ctz simplification.
	* match.pd: Add matching for ctz idioms.

2020-01-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64.c (aarch64_invalid_conversion): New function
	for target hook.
	(aarch64_invalid_unary_op): New function for target hook.
	(aarch64_invalid_binary_op): New function for target hook.

2020-01-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config.gcc: Add arm_bf16.h.
	* config/aarch64/aarch64-builtins.c
	(aarch64_simd_builtin_std_type): Add BFmode.
	(aarch64_init_simd_builtin_types): Define element types for vector
	types.
	(aarch64_init_bf16_types): New function.
	(aarch64_general_init_builtins): Add arm_init_bf16_types function call.
	* config/aarch64/aarch64-modes.def: Add BFmode and V4BF, V8BF vector
	modes.
	* config/aarch64/aarch64-simd-builtin-types.def: Add BF SIMD types.
	* config/aarch64/aarch64-simd.md: Add BF vector types to NEON move
	patterns.
	* config/aarch64/aarch64.h (AARCH64_VALID_SIMD_DREG_MODE): Add V4BF.
	(AARCH64_VALID_SIMD_QREG_MODE): Add V8BF.
	* config/aarch64/aarch64.c
	(aarch64_classify_vector_mode): Add support for BF types.
	(aarch64_gimplify_va_arg_expr): Add support for BF types.
	(aarch64_vq_mode): Add support for BF types.
	(aarch64_simd_container_mode): Add support for BF types.
	(aarch64_mangle_type): Add support for BF scalar type.
	* config/aarch64/aarch64.md: Add BFmode to movhf pattern.
	* config/aarch64/arm_bf16.h: New file.
	* config/aarch64/arm_neon.h: Add arm_bf16.h and Bfloat vector types.
	* config/aarch64/iterators.md: Add BF types to mode attributes.
	(HFBF, GPF_TF_F16_MOV, VDMOV, VQMOV, VQMOV_NO2Em VALL_F16MOV): New.

2020-01-10  Jason Merrill  <jason@redhat.com>

	PR c++/93173 - incorrect tree sharing.
	* gimplify.c (copy_if_shared): No longer static.
	* gimplify.h: Declare it.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi (-msve-vector-bits=): Document that
	-msve-vector-bits=128 now generates VL-specific code for
	little-endian targets.
	* config/aarch64/aarch64-sve-builtins.cc (register_builtin_types): Use
	build_vector_type_for_mode to construct the data vector types.
	* config/aarch64/aarch64.c (aarch64_convert_sve_vector_bits): Generate
	VL-specific code for -msve-vector-bits=128 on little-endian targets.
	(aarch64_simd_container_mode): Always prefer Advanced SIMD modes
	for 128-bit vectors.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_evpc_sel): Fix gen_vcond_mask
	invocation.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_builtin_vectorized_function): Check for specific vector modes,
	rather than checking the number of elements and the element mode.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
	get_related_vectype_for_scalar_type rather than build_vector_type
	to create the index type for a conditional reduction.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (update_epilogue_loop_vinfo): Update DR_REF
	for any type of gather or scatter, including strided accesses.

2020-01-10  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vectorizer.h (get_dr_vinfo_offset): Add missing function
	 comment.

2020-01-10  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref): Use
	get_dr_vinfo_offset
	* tree-vect-loop.c (update_epilogue_loop_vinfo):  Remove orig_drs_init
	parameter and its use to reset DR_OFFSET's.
	(vect_transform_loop): Remove orig_drs_init argument.
	* tree-vect-loop-manip.c (vect_update_init_of_dr): Update the offset
	member of dr_vec_info rather than the offset of the associated
	data_reference's innermost_loop_behavior.
	(vect_update_init_of_dr): Pass dr_vec_info instead of data_reference.
	(vect_do_peeling): Remove orig_drs_init parameter and its construction.
	* tree-vect-stmts.c (check_scan_store): Replace use of DR_OFFSET with
	get_dr_vinfo_offset.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.

2020-01-10  Richard Biener  <rguenther@suse.de>

	* gimple-ssa-store-merging
	(pass_store_merging::terminate_all_aliasing_chains): Cache alias info.

2020-01-10  Martin Liska  <mliska@suse.cz>

	PR ipa/93217
	* ipa-inline-analysis.c (offline_size): Make proper parenthesis
	encapsulation that was there before r280040.

2020-01-10  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (sink_clobbers): Move clobbers to out-of-IL
	sequences to avoid walking them again for secondary opportunities.
	(pass_lower_eh_dispatch::execute): Instead actually insert
	them here.

2020-01-10  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (redirect_eh_edge_1): Avoid some work if possible.
	(cleanup_all_empty_eh): Walk landing pads in reverse order to
	avoid quadraticness.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipa_sra_max_replacements): Mark as Optimization.
	* ipa-sra.c (pull_accesses_from_callee): New parameter caller, use it
	to get param_ipa_sra_max_replacements.
	(param_splitting_across_edge): Pass the caller to
	pull_accesses_from_callee.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipcp_unit_growth): Mark as Optimization.
	* ipa-cp.c (max_new_size): Removed.
	(orig_overall_size): New variable.
	(get_max_overall_size): New function.
	(estimate_local_effects): Use it.  Adjust dump.
	(decide_about_value): Likewise.
	(ipcp_propagate_stage): Do not calculate max_new_size, just store
	orig_overall_size.  Adjust dump.
	(ipa_cp_c_finalize): Clear orig_overall_size instead of max_new_size.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipa_max_agg_items): Mark as Optimization
	* ipa-cp.c (merge_agg_lats_step): New parameter max_agg_items, use
	instead of param_ipa_max_agg_items.
	(merge_aggregate_lattices): Extract param_ipa_max_agg_items from
	optimization info for the callee.

2020-01-09  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* lto-streamer-in.c (input_function): Remove streamed-in inline debug
	markers	if debug_inline_points is false.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config.gcc (aarch64*-*-*): Add aarch64-sve-builtins-sve2.o to
	extra_objs.
	* config/aarch64/t-aarch64 (aarch64-sve-builtins.o): Depend on
	aarch64-sve-builtins-base.def, aarch64-sve-builtins-sve2.def and
	aarch64-sve-builtins-sve2.h.
	(aarch64-sve-builtins-sve2.o): New rule.
	* config/aarch64/aarch64.h (AARCH64_ISA_SVE2_AES): New macro.
	(AARCH64_ISA_SVE2_BITPERM, AARCH64_ISA_SVE2_SHA3): Likewise.
	(AARCH64_ISA_SVE2_SM4, TARGET_SVE2_AES, TARGET_SVE2_BITPERM): Likewise.
	(TARGET_SVE2_SHA, TARGET_SVE2_SM4): Likewise.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Handle
	TARGET_SVE2_AES, TARGET_SVE2_BITPERM, TARGET_SVE2_SHA3 and
	TARGET_SVE2_SM4.
	* config/aarch64/aarch64-sve.md: Update comments with SVE2
	instructions that are handled here.
	(@cond_asrd<mode>): Generalize to...
	(@cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>): ...this.
	(*cond_asrd<mode>_2): Generalize to...
	(*cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>_2): ...this.
	(*cond_asrd<mode>_z): Generalize to...
	(*cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>_z): ...this.
	* config/aarch64/aarch64.md (UNSPEC_LDNT1_GATHER): New unspec.
	(UNSPEC_STNT1_SCATTER, UNSPEC_WHILEGE, UNSPEC_WHILEGT): Likewise.
	(UNSPEC_WHILEHI, UNSPEC_WHILEHS): Likewise.
	* config/aarch64/aarch64-sve2.md (@aarch64_gather_ldnt<mode>): New
	pattern.
	(@aarch64_gather_ldnt_<ANY_EXTEND:optab><SVE_FULL_SDI:mode><SVE_PARTIAL_I:mode>)
	(@aarch64_scatter_stnt<mode>): Likewise.
	(@aarch64_scatter_stnt_<SVE_FULL_SDI:mode><SVE_PARTIAL_I:mode>)
	(@aarch64_mul_lane_<mode>): Likewise.
	(@aarch64_sve_suqadd<mode>_const): Likewise.
	(*<sur>h<addsub><mode>): Generalize to...
	(@aarch64_pred_<SVE2_COND_INT_BINARY_REV:sve_int_op><mode>): ...this
	new pattern.
	(@cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_3): Likewise.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_any): Likewise.
	(*cond_<SVE2_COND_INT_BINARY_NOREV:sve_int_op><mode>_z): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY:sve_int_op><mode>):: Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY:sve_int_op>_lane_<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_INT_SHIFT:sve_int_op><mode>): Likewise.
	(@cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_3): Likewise.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_any): Likewise.
	(@aarch64_sve_<SVE2_INT_TERNARY:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_TERNARY_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_add_mul_lane_<mode>): Likewise.
	(@aarch64_sve_sub_mul_lane_<mode>): Likewise.
	(@aarch64_sve2_xar<mode>): Likewise.
	(@aarch64_sve2_bcax<mode>): Likewise.
	(*aarch64_sve2_eor3<mode>): Rename to...
	(@aarch64_sve2_eor3<mode>): ...this.
	(@aarch64_sve2_bsl<mode>): New expander.
	(@aarch64_sve2_nbsl<mode>): Likewise.
	(@aarch64_sve2_bsl1n<mode>): Likewise.
	(@aarch64_sve2_bsl2n<mode>): Likewise.
	(@aarch64_sve_add_<SHIFTRT:sve_int_op><mode>): Likewise.
	(*aarch64_sve2_sra<mode>): Add MOVPRFX support.
	(@aarch64_sve_add_<VRSHR_N:sve_int_op><mode>): New pattern.
	(@aarch64_sve_<SVE2_INT_SHIFT_INSERT:sve_int_op><mode>): Likewise.
	(@aarch64_sve2_<USMAX:su>aba<mode>): New expander.
	(*aarch64_sve2_<USMAX:su>aba<mode>): New pattern.
	(@aarch64_sve_<SVE2_INT_BINARY_WIDE:sve_int_op><mode>): Likewise.
	(<su>mull<bt><Vwide>): Generalize to...
	(@aarch64_sve_<SVE2_INT_BINARY_LONG:sve_int_op><mode>): ...this new
	pattern.
	(@aarch64_sve_<SVE2_INT_BINARY_LONG_lANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_LONG:sve_int_op><mode>)
	(@aarch64_sve_add_<SVE2_INT_ADD_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_add_<SVE2_INT_ADD_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_qadd_<SVE2_INT_QADD_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_qadd_<SVE2_INT_QADD_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_sub_<SVE2_INT_SUB_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_sub_<SVE2_INT_SUB_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_qsub_<SVE2_INT_QSUB_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_qsub_<SVE2_INT_QSUB_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_FP_TERNARY_LONG:sve_fp_op><mode>): New patterns.
	(@aarch64_<SVE2_FP_TERNARY_LONG_LANE:sve_fp_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_INT_UNARY_NARROWB:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_UNARY_NARROWT:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY_NARROWB:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY_NARROWT:sve_int_op><mode>): Likewise.
	(<SHRNB:r>shrnb<mode>): Generalize to...
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_NARROWB:sve_int_op><mode>): ...this
	new pattern.
	(<SHRNT:r>shrnt<mode>): Generalize to...
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_NARROWT:sve_int_op><mode>): ...this
	new pattern.
	(@aarch64_pred_<SVE2_INT_BINARY_PAIR:sve_int_op><mode>): New pattern.
	(@aarch64_pred_<SVE2_FP_BINARY_PAIR:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>): New expander.
	(*cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>_z): Likewise.
	(@aarch64_sve_<SVE2_INT_CADD:optab><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_CMLA:optab><mode>): Likewise.
	(@aarch64_<SVE2_INT_CMLA:optab>_lane_<mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_CDOT:optab><mode>): Likewise.
	(@aarch64_<SVE2_INT_CDOT:optab>_lane_<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): New pattern.
	(@aarch64_sve2_cvtnt<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>_any): New pattern.
	(@aarch64_sve2_cvtxnt<mode>): Likewise.
	(@aarch64_pred_<SVE2_U32_UNARY:sve_int_op><mode>): Likewise.
	(@cond_<SVE2_U32_UNARY:sve_int_op><mode>): New expander.
	(*cond_<SVE2_U32_UNARY:sve_int_op><mode>): New pattern.
	(@aarch64_pred_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): New pattern.
	(@aarch64_sve2_pmul<mode>): Likewise.
	(@aarch64_sve_<SVE2_PMULL:optab><mode>): Likewise.
	(@aarch64_sve_<SVE2_PMULL_PAIR:optab><mode>): Likewise.
	(@aarch64_sve2_tbl2<mode>): Likewise.
	(@aarch64_sve2_tbx<mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BITPERM:sve_int_op><mode>): Likewise.
	(@aarch64_sve2_histcnt<mode>): Likewise.
	(@aarch64_sve2_histseg<mode>): Likewise.
	(@aarch64_pred_<SVE2_MATCH:sve_int_op><mode>): Likewise.
	(*aarch64_pred_<SVE2_MATCH:sve_int_op><mode>_cc): Likewise.
	(*aarch64_pred_<SVE2_MATCH:sve_int_op><mode>_ptest): Likewise.
	(aarch64_sve2_aes<CRYPTO_AES:aes_op>): Likewise.
	(aarch64_sve2_aes<CRYPTO_AESMC:aesmc_op>): Likewise.
	(*aarch64_sve2_aese_fused, *aarch64_sve2_aesd_fused): Likewise.
	(aarch64_sve2_rax1, aarch64_sve2_sm4e, aarch64_sve2_sm4ekey): Likewise.
	(<su>mulh<r>s<mode>3): Update after above pattern name changes.
	* config/aarch64/iterators.md (VNx16QI_ONLY, VNx4SF_ONLY)
	(SVE_STRUCT2, SVE_FULL_BHI, SVE_FULL_HSI, SVE_FULL_HDI)
	(SVE2_PMULL_PAIR_I): New mode iterators.
	(UNSPEC_ADCLB, UNSPEC_ADCLT, UNSPEC_ADDHNB, UNSPEC_ADDHNT, UNSPEC_BDEP)
	(UNSPEC_BEXT, UNSPEC_BGRP, UNSPEC_CADD90, UNSPEC_CADD270, UNSPEC_CDOT)
	(UNSPEC_CDOT90, UNSPEC_CDOT180, UNSPEC_CDOT270, UNSPEC_CMLA)
	(UNSPEC_CMLA90, UNSPEC_CMLA180, UNSPEC_CMLA270, UNSPEC_COND_FCVTLT)
	(UNSPEC_COND_FCVTNT, UNSPEC_COND_FCVTX, UNSPEC_COND_FCVTXNT)
	(UNSPEC_COND_FLOGB, UNSPEC_EORBT, UNSPEC_EORTB, UNSPEC_FADDP)
	(UNSPEC_FMAXP, UNSPEC_FMAXNMP, UNSPEC_FMLALB, UNSPEC_FMLALT)
	(UNSPEC_FMLSLB, UNSPEC_FMLSLT, UNSPEC_FMINP, UNSPEC_FMINNMP)
	(UNSPEC_HISTCNT, UNSPEC_HISTSEG, UNSPEC_MATCH, UNSPEC_NMATCH)
	(UNSPEC_PMULLB, UNSPEC_PMULLB_PAIR, UNSPEC_PMULLT, UNSPEC_PMULLT_PAIR)
	(UNSPEC_RADDHNB, UNSPEC_RADDHNT, UNSPEC_RSUBHNB, UNSPEC_RSUBHNT)
	(UNSPEC_SLI, UNSPEC_SRI, UNSPEC_SABDLB, UNSPEC_SABDLT, UNSPEC_SADDLB)
	(UNSPEC_SADDLBT, UNSPEC_SADDLT, UNSPEC_SADDWB, UNSPEC_SADDWT)
	(UNSPEC_SBCLB, UNSPEC_SBCLT, UNSPEC_SMAXP, UNSPEC_SMINP)
	(UNSPEC_SQCADD90, UNSPEC_SQCADD270, UNSPEC_SQDMULLB, UNSPEC_SQDMULLBT)
	(UNSPEC_SQDMULLT, UNSPEC_SQRDCMLAH, UNSPEC_SQRDCMLAH90)
	(UNSPEC_SQRDCMLAH180, UNSPEC_SQRDCMLAH270, UNSPEC_SQRSHRNB)
	(UNSPEC_SQRSHRNT, UNSPEC_SQRSHRUNB, UNSPEC_SQRSHRUNT, UNSPEC_SQSHRNB)
	(UNSPEC_SQSHRNT, UNSPEC_SQSHRUNB, UNSPEC_SQSHRUNT, UNSPEC_SQXTNB)
	(UNSPEC_SQXTNT, UNSPEC_SQXTUNB, UNSPEC_SQXTUNT, UNSPEC_SSHLLB)
	(UNSPEC_SSHLLT, UNSPEC_SSUBLB, UNSPEC_SSUBLBT, UNSPEC_SSUBLT)
	(UNSPEC_SSUBLTB, UNSPEC_SSUBWB, UNSPEC_SSUBWT, UNSPEC_SUBHNB)
	(UNSPEC_SUBHNT, UNSPEC_TBL2, UNSPEC_UABDLB, UNSPEC_UABDLT)
	(UNSPEC_UADDLB, UNSPEC_UADDLT, UNSPEC_UADDWB, UNSPEC_UADDWT)
	(UNSPEC_UMAXP, UNSPEC_UMINP, UNSPEC_UQRSHRNB, UNSPEC_UQRSHRNT)
	(UNSPEC_UQSHRNB, UNSPEC_UQSHRNT, UNSPEC_UQXTNB, UNSPEC_UQXTNT)
	(UNSPEC_USHLLB, UNSPEC_USHLLT, UNSPEC_USUBLB, UNSPEC_USUBLT)
	(UNSPEC_USUBWB, UNSPEC_USUBWT): New unspecs.
	(UNSPEC_SMULLB, UNSPEC_SMULLT, UNSPEC_UMULLB, UNSPEC_UMULLT)
	(UNSPEC_SMULHS, UNSPEC_SMULHRS, UNSPEC_UMULHS, UNSPEC_UMULHRS)
	(UNSPEC_RSHRNB, UNSPEC_RSHRNT, UNSPEC_SHRNB, UNSPEC_SHRNT): Move
	further down file.
	(VNARROW, Ventype): New mode attributes.
	(Vewtype): Handle VNx2DI.  Fix typo in comment.
	(VDOUBLE): New mode attribute.
	(sve_lane_con): Handle VNx8HI.
	(SVE_INT_UNARY): Include ss_abs and ss_neg for TARGET_SVE2.
	(SVE_INT_BINARY): Likewise ss_plus, us_plus, ss_minus and us_minus.
	(sve_int_op, sve_int_op_rev): Handle the above codes.
	(sve_pred_int_rhs2_operand): Likewise.
	(MULLBT, SHRNB, SHRNT): Delete.
	(SVE_INT_SHIFT_IMM): New int iterator.
	(SVE_WHILE): Add UNSPEC_WHILEGE, UNSPEC_WHILEGT, UNSPEC_WHILEHI
	and UNSPEC_WHILEHS for TARGET_SVE2.
	(SVE2_U32_UNARY, SVE2_INT_UNARY_NARROWB, SVE2_INT_UNARY_NARROWT)
	(SVE2_INT_BINARY, SVE2_INT_BINARY_LANE, SVE2_INT_BINARY_LONG)
	(SVE2_INT_BINARY_LONG_LANE, SVE2_INT_BINARY_NARROWB)
	(SVE2_INT_BINARY_NARROWT, SVE2_INT_BINARY_PAIR, SVE2_FP_BINARY_PAIR)
	(SVE2_INT_BINARY_PAIR_LONG, SVE2_INT_BINARY_WIDE): New int iterators.
	(SVE2_INT_SHIFT_IMM_LONG, SVE2_INT_SHIFT_IMM_NARROWB): Likewise.
	(SVE2_INT_SHIFT_IMM_NARROWT, SVE2_INT_SHIFT_INSERT, SVE2_INT_CADD)
	(SVE2_INT_BITPERM, SVE2_INT_TERNARY, SVE2_INT_TERNARY_LANE): Likewise.
	(SVE2_FP_TERNARY_LONG, SVE2_FP_TERNARY_LONG_LANE, SVE2_INT_CMLA)
	(SVE2_INT_CDOT, SVE2_INT_ADD_BINARY_LONG, SVE2_INT_QADD_BINARY_LONG)
	(SVE2_INT_SUB_BINARY_LONG, SVE2_INT_QSUB_BINARY_LONG): Likewise.
	(SVE2_INT_ADD_BINARY_LONG_LANE, SVE2_INT_QADD_BINARY_LONG_LANE)
	(SVE2_INT_SUB_BINARY_LONG_LANE, SVE2_INT_QSUB_BINARY_LONG_LANE)
	(SVE2_COND_INT_UNARY_FP, SVE2_COND_FP_UNARY_LONG): Likewise.
	(SVE2_COND_FP_UNARY_NARROWB, SVE2_COND_INT_BINARY): Likewise.
	(SVE2_COND_INT_BINARY_NOREV, SVE2_COND_INT_BINARY_REV): Likewise.
	(SVE2_COND_INT_SHIFT, SVE2_MATCH, SVE2_PMULL): Likewise.
	(optab): Handle the new unspecs.
	(su, r): Remove entries for UNSPEC_SHRNB, UNSPEC_SHRNT, UNSPEC_RSHRNB
	and UNSPEC_RSHRNT.
	(lr): Handle the new unspecs.
	(bt): Delete.
	(cmp_op, while_optab_cmp, sve_int_op): Handle the new unspecs.
	(sve_int_op_rev, sve_int_add_op, sve_int_qadd_op, sve_int_sub_op)
	(sve_int_qsub_op): New int attributes.
	(sve_fp_op, rot): Handle the new unspecs.
	* config/aarch64/aarch64-sve-builtins.h
	(function_resolver::require_matching_pointer_type): Declare.
	(function_resolver::resolve_unary): Add an optional boolean argument.
	(function_resolver::finish_opt_n_resolution): Add an optional
	type_suffix_index argument.
	(gimple_folder::redirect_call): Declare.
	(gimple_expander::prepare_gather_address_operands): Add an optional
	bool parameter.
	* config/aarch64/aarch64-sve-builtins.cc: Include
	aarch64-sve-builtins-sve2.h.
	(TYPES_b_unsigned, TYPES_b_integer, TYPES_bh_integer): New macros.
	(TYPES_bs_unsigned, TYPES_hs_signed, TYPES_hs_integer): Likewise.
	(TYPES_hd_unsigned, TYPES_hsd_signed): Likewise.
	(TYPES_hsd_integer): Use TYPES_hsd_signed.
	(TYPES_s_float_hsd_integer, TYPES_s_float_sd_integer): New macros.
	(TYPES_s_unsigned): Likewise.
	(TYPES_s_integer): Use TYPES_s_unsigned.
	(TYPES_sd_signed, TYPES_sd_unsigned): New macros.
	(TYPES_sd_integer): Use them.
	(TYPES_d_unsigned): New macro.
	(TYPES_d_integer): Use it.
	(TYPES_d_data, TYPES_cvt_long, TYPES_cvt_narrow_s): New macros.
	(TYPES_cvt_narrow): Likewise.
	(DEF_SVE_TYPES_ARRAY): Include the new types macros above.
	(preds_mx): New variable.
	(function_builder::add_overloaded_function): Allow the new feature
	set to be more restrictive than the original one.
	(function_resolver::infer_pointer_type): Remove qualifiers from
	the pointer type before printing it.
	(function_resolver::require_matching_pointer_type): New function.
	(function_resolver::resolve_sv_displacement): Handle functions
	that don't support 32-bit vector indices or svint32_t vector offsets.
	(function_resolver::finish_opt_n_resolution): Take the inferred type
	as a separate argument.
	(function_resolver::resolve_unary): Optionally treat all forms in
	the same way as normal merging functions.
	(gimple_folder::redirect_call): New function.
	(function_expander::prepare_gather_address_operands): Add an argument
	that says whether scaled forms are available.  If they aren't,
	handle scaling of vector indices and don't add the extension and
	scaling operands.
	(function_expander::map_to_unspecs): If aarch64_sve isn't available,
	fall back to using cond_* instead.
	* config/aarch64/aarch64-sve-builtins-functions.h (rtx_code_function):
	Split out the member variables into...
	(rtx_code_function_base): ...this new base class.
	(rtx_code_function_rotated): Inherit rtx_code_function_base.
	(unspec_based_function): Split out the member variables into...
	(unspec_based_function_base): ...this new base class.
	(unspec_based_function_rotated): Inherit unspec_based_function_base.
	(unspec_based_function_exact_insn): New class.
	(unspec_based_add_function, unspec_based_add_lane_function)
	(unspec_based_lane_function, unspec_based_pred_function)
	(unspec_based_qadd_function, unspec_based_qadd_lane_function)
	(unspec_based_qsub_function, unspec_based_qsub_lane_function)
	(unspec_based_sub_function, unspec_based_sub_lane_function): New
	typedefs.
	(unspec_based_fused_function): New class.
	(unspec_based_mla_function, unspec_based_mls_function): New typedefs.
	(unspec_based_fused_lane_function): New class.
	(unspec_based_mla_lane_function, unspec_based_mls_lane_function): New
	typedefs.
	(CODE_FOR_MODE1): New macro.
	(fixed_insn_function): New class.
	(while_comparison): Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.h (binary_long_lane)
	(binary_long_opt_n, binary_narrowb_opt_n, binary_narrowt_opt_n)
	(binary_to_uint, binary_wide, binary_wide_opt_n, compare, compare_ptr)
	(load_ext_gather_index_restricted, load_ext_gather_offset_restricted)
	(load_gather_sv_restricted, shift_left_imm_long): Declare.
	(shift_left_imm_to_uint, shift_right_imm_narrowb): Likewise.
	(shift_right_imm_narrowt, shift_right_imm_narrowb_to_uint): Likewise.
	(shift_right_imm_narrowt_to_uint, store_scatter_index_restricted)
	(store_scatter_offset_restricted, tbl_tuple, ternary_long_lane)
	(ternary_long_opt_n, ternary_qq_lane_rotate, ternary_qq_rotate)
	(ternary_shift_left_imm, ternary_shift_right_imm, ternary_uint)
	(unary_convert_narrowt, unary_long, unary_narrowb, unary_narrowt)
	(unary_narrowb_to_uint, unary_narrowt_to_uint, unary_to_int): Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (apply_predication):
	Also add an initial argument for unary_convert_narrowt, regardless
	of the predication type.
	(build_32_64): Allow loads and stores to specify MODE_none.
	(build_sv_index64, build_sv_uint_offset): New functions.
	(long_type_suffix): New function.
	(binary_imm_narrowb_base, binary_imm_narrowt_base): New classes.
	(binary_imm_long_base, load_gather_sv_base): Likewise.
	(shift_right_imm_narrow_wrapper, ternary_shift_imm_base): Likewise.
	(ternary_resize2_opt_n_base, ternary_resize2_lane_base): Likewise.
	(unary_narrowb_base, unary_narrowt_base): Likewise.
	(binary_long_lane_def, binary_long_lane): New shape.
	(binary_long_opt_n_def, binary_long_opt_n): Likewise.
	(binary_narrowb_opt_n_def, binary_narrowb_opt_n): Likewise.
	(binary_narrowt_opt_n_def, binary_narrowt_opt_n): Likewise.
	(binary_to_uint_def, binary_to_uint): Likewise.
	(binary_wide_def, binary_wide): Likewise.
	(binary_wide_opt_n_def, binary_wide_opt_n): Likewise.
	(compare_def, compare): Likewise.
	(compare_ptr_def, compare_ptr): Likewise.
	(load_ext_gather_index_restricted_def,
	load_ext_gather_index_restricted): Likewise.
	(load_ext_gather_offset_restricted_def,
	load_ext_gather_offset_restricted): Likewise.
	(load_gather_sv_def): Inherit from load_gather_sv_base.
	(load_gather_sv_restricted_def, load_gather_sv_restricted): New shape.
	(shift_left_imm_def, shift_left_imm): Likewise.
	(shift_left_imm_long_def, shift_left_imm_long): Likewise.
	(shift_left_imm_to_uint_def, shift_left_imm_to_uint): Likewise.
	(store_scatter_index_restricted_def,
	store_scatter_index_restricted): Likewise.
	(store_scatter_offset_restricted_def,
	store_scatter_offset_restricted): Likewise.
	(tbl_tuple_def, tbl_tuple): Likewise.
	(ternary_long_lane_def, ternary_long_lane): Likewise.
	(ternary_long_opt_n_def, ternary_long_opt_n): Likewise.
	(ternary_qq_lane_def): Inherit from ternary_resize2_lane_base.
	(ternary_qq_lane_rotate_def, ternary_qq_lane_rotate): New shape
	(ternary_qq_opt_n_def): Inherit from ternary_resize2_opt_n_base.
	(ternary_qq_rotate_def, ternary_qq_rotate): New shape.
	(ternary_shift_left_imm_def, ternary_shift_left_imm): Likewise.
	(ternary_shift_right_imm_def, ternary_shift_right_imm): Likewise.
	(ternary_uint_def, ternary_uint): Likewise.
	(unary_convert): Fix typo in comment.
	(unary_convert_narrowt_def, unary_convert_narrowt): New shape.
	(unary_long_def, unary_long): Likewise.
	(unary_narrowb_def, unary_narrowb): Likewise.
	(unary_narrowt_def, unary_narrowt): Likewise.
	(unary_narrowb_to_uint_def, unary_narrowb_to_uint): Likewise.
	(unary_narrowt_to_uint_def, unary_narrowt_to_uint): Likewise.
	(unary_to_int_def, unary_to_int): Likewise.
	* config/aarch64/aarch64-sve-builtins-base.cc (unspec_cmla)
	(unspec_fcmla, unspec_cond_fcmla, expand_mla_mls_lane): New functions.
	(svasrd_impl): Delete.
	(svcadd_impl::expand): Handle integer operations too.
	(svcmla_impl::expand, svcmla_lane::expand): Likewise, using the
	new functions to derive the unspec numbers.
	(svmla_svmls_lane_impl): Replace with...
	(svmla_lane_impl, svmls_lane_impl): ...these new classes.  Handle
	integer operations too.
	(svwhile_impl): Rename to...
	(svwhilelx_impl): ...this and inherit from while_comparison.
	(svasrd): Use unspec_based_function.
	(svmla_lane): Use svmla_lane_impl.
	(svmls_lane): Use svmls_lane_impl.
	(svrecpe, svrsqrte): Handle unsigned integer operations too.
	(svwhilele, svwhilelt): Use svwhilelx_impl.
	* config/aarch64/aarch64-sve-builtins-sve2.h: New file.
	* config/aarch64/aarch64-sve-builtins-sve2.cc: Likewise.
	* config/aarch64/aarch64-sve-builtins-sve2.def: Likewise.
	* config/aarch64/aarch64-sve-builtins.def: Include
	aarch64-sve-builtins-sve2.def.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve_arith_immediate_p)
	(aarch64_sve_sqadd_sqsub_immediate_p): Add a machine_mode argument.
	* config/aarch64/aarch64.c (aarch64_sve_arith_immediate_p)
	(aarch64_sve_sqadd_sqsub_immediate_p): Likewise.  Handle scalar
	immediates as well as vector ones.
	* config/aarch64/predicates.md (aarch64_sve_arith_immediate)
	(aarch64_sve_sub_arith_immediate, aarch64_sve_qadd_immediate)
	(aarch64_sve_qsub_immediate): Update calls accordingly.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve2.md: Add banner comments.
	(<su>mulh<r>s<mode>3): Move further up file.
	(<su>mull<bt><Vwide>, <r>shrnb<mode>, <r>shrnt<mode>)
	(*aarch64_sve2_sra<mode>): Move further down file.
	* config/aarch64/t-aarch64 (s-check-sve-md): Check aarch64-sve2.md too.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_WHILE): Add UNSPEC_WHILERW
	and UNSPEC_WHILEWR.
	(while_optab_cmp): Handle them.
	* config/aarch64/aarch64-sve.md
	(*while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>_ptest): Make public
	and add a "@" marker.
	* config/aarch64/aarch64-sve2.md (check_<raw_war>_ptrs<mode>): Use it
	instead of gen_aarch64_sve2_while_ptest.
	(@aarch64_sve2_while<cmp_op><GPI:mode><PRED_ALL:mode>_ptest): Delete.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_WHILE_LE): Rename to...
	(UNSPEC_WHILELE): ...this.
	(UNSPEC_WHILE_LO): Rename to...
	(UNSPEC_WHILELO): ...this.
	(UNSPEC_WHILE_LS): Rename to...
	(UNSPEC_WHILELS): ...this.
	(UNSPEC_WHILE_LT): Rename to...
	(UNSPEC_WHILELT): ...this.
	* config/aarch64/iterators.md (SVE_WHILE): Update accordingly.
	(cmp_op, while_optab_cmp): Likewise.
	* config/aarch64/aarch64.c (aarch64_sve_move_pred_via_while): Likewise.
	* config/aarch64/aarch64-sve-builtins-base.cc (svwhilele): Likewise.
	(svwhilelt): Likewise.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-shapes.h (unary_count): Delete.
	(unary_to_uint): Define.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (unary_count_def)
	(unary_count): Rename to...
	(unary_to_uint_def, unary_to_uint): ...this.
	* config/aarch64/aarch64-sve-builtins-base.def: Update accordingly.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-functions.h
	(code_for_mode_function): New class.
	(CODE_FOR_MODE0, QUIET_CODE_FOR_MODE0): New macros.
	* config/aarch64/aarch64-sve-builtins-base.cc (svcompact_impl)
	(svext_impl, svmul_lane_impl, svsplice_impl, svtmad_impl): Delete.
	(svcompact, svext, svsplice): Use QUIET_CODE_FOR_MODE0.
	(svmul_lane, svtmad): Use CODE_FOR_MODE0.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (addsub): New code attribute.
	* config/aarch64/aarch64-simd.md (aarch64_<su_optab><optab><mode>):
	Re-express as...
	(aarch64_<su_optab>q<addsub><mode>): ...this, making the same change
	in the asm string and attributes.  Fix indentation.
	* config/aarch64/aarch64-sve.md (@aarch64_<su_optab><optab><mode>):
	Re-express as...
	(@aarch64_sve_<optab><mode>): ...this.
	* config/aarch64/aarch64-sve-builtins.h
	(function_expander::expand_signed_unpred_op): Delete.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::expand_signed_unpred_op): Likewise.
	(function_expander::map_to_rtx_codes): If the optab isn't defined,
	try using code_for_aarch64_sve instead.
	* config/aarch64/aarch64-sve-builtins-base.cc (svqadd_impl): Delete.
	(svqsub_impl): Likewise.
	(svqadd, svqsub): Use rtx_code_function instead.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SRHSUB, URHSUB): Delete.
	(HADDSUB, sur, addsub): Remove them.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-nrv.c (pass_return_slot::execute): Handle all internal
	functions the same way, rather than singling out those that
	aren't mapped directly to optabs.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (compatible_vector_types_p): New target hook.
	* hooks.h (hook_bool_const_tree_const_tree_true): Declare.
	* hooks.c (hook_bool_const_tree_const_tree_true): New function.
	* doc/tm.texi.in (TARGET_COMPATIBLE_VECTOR_TYPES_P): New hook.
	* doc/tm.texi: Regenerate.
	* gimple-expr.c: Include target.h.
	(useless_type_conversion_p): Use targetm.compatible_vector_types_p.
	* config/aarch64/aarch64.c (aarch64_compatible_vector_types_p): New
	function.
	(TARGET_COMPATIBLE_VECTOR_TYPES_P): Define.
	* config/aarch64/aarch64-sve-builtins.cc (gimple_folder::convert_pred):
	Use the original predicate if it already has a suitable type.

2020-01-09  Martin Jambor  <mjambor@suse.cz>

	* cgraph.h (cgraph_edge): Make remove, set_call_stmt, make_direct,
	resolve_speculation and redirect_call_stmt_to_callee static.  Change
	return type of set_call_stmt to cgraph_edge *.
	* auto-profile.c (afdo_indirect_call): Adjust call to
	redirect_call_stmt_to_callee.
	* cgraph.c (cgraph_edge::set_call_stmt): Make return cgraph-edge *,
	make the this pointer explicit, adjust self-recursive calls and the
	call top make_direct.  Return the resulting edge.
	(cgraph_edge::remove): Make this pointer explicit.
	(cgraph_edge::resolve_speculation): Likewise, adjust call to remove.
	(cgraph_edge::make_direct): Likewise, adjust call to
	resolve_speculation.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise, also adjust
	call to set_call_stmt.
	(cgraph_update_edges_for_call_stmt_node): Update call to
	set_call_stmt and remove.
	* cgraphclones.c (cgraph_node::set_call_stmt_including_clones):
	Renamed edge to master_edge.  Adjusted calls to set_call_stmt.
	(cgraph_node::create_edge_including_clones): Moved "first" definition
	of edge to the block where it was used.  Adjusted calls to
	set_call_stmt.
	(cgraph_node::remove_symbol_and_inline_clones): Adjust call to
	cgraph_edge::remove.
	* cgraphunit.c (walk_polymorphic_call_targets): Adjusted calls to
	make_direct and redirect_call_stmt_to_callee.
	* ipa-fnsummary.c (redirect_to_unreachable): Adjust calls to
	resolve_speculation and make_direct.
	* ipa-inline-transform.c (inline_transform): Adjust call to
	redirect_call_stmt_to_callee.
	(check_speculations_1):: Adjust call to resolve_speculation.
	* ipa-inline.c (resolve_noninline_speculation): Adjust call to
	resolve-speculation.
	(inline_small_functions): Adjust call to resolve_speculation.
	(ipa_inline): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Adjust call to
	make_direct.
	* ipa-visibility.c (function_and_variable_visibility): Make iteration
	safe with regards to edge removal, adjust calls to
	redirect_call_stmt_to_callee.
	* ipa.c (walk_polymorphic_call_targets): Adjust calls to make_direct
	and redirect_call_stmt_to_callee.
	* multiple_target.c (create_dispatcher_calls): Adjust call to
	redirect_call_stmt_to_callee
	(redirect_to_specific_clone): Likewise.
	* tree-cfgcleanup.c (delete_unreachable_blocks_update_callgraph):
	Adjust calls to cgraph_edge::remove.
	* tree-inline.c (copy_bb): Adjust call to set_call_stmt.
	(redirect_all_calls): Adjust call to redirect_call_stmt_to_callee.
	(expand_call_inline): Adjust call to cgraph_edge::remove.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* params.opt: Set Optimization for
	param_max_speculative_devirt_maydefs.

2020-01-09  Martin Sebor  <msebor@redhat.com>

	PR middle-end/93200
	PR fortran/92956
	* builtins.c (compute_objsize): Avoid handling MEM_REFs of vector type.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* auto-profile.c (auto_profile): Use opt_for_fn
	for a parameter.
	* ipa-cp.c (ipcp_lattice::add_value): Likewise.
	(propagate_vals_across_arith_jfunc): Likewise.
	(hint_time_bonus): Likewise.
	(incorporate_penalties): Likewise.
	(good_cloning_opportunity_p): Likewise.
	(perform_estimation_of_a_value): Likewise.
	(estimate_local_effects): Likewise.
	(ipcp_propagate_stage): Likewise.
	* ipa-fnsummary.c (decompose_param_expr): Likewise.
	(set_switch_stmt_execution_predicate): Likewise.
	(analyze_function_body): Likewise.
	* ipa-inline-analysis.c (offline_size): Likewise.
	* ipa-inline.c (early_inliner): Likewise.
	* ipa-prop.c (ipa_analyze_node): Likewise.
	(ipcp_transform_function): Likewise.
	* ipa-sra.c (process_scan_results): Likewise.
	(ipa_sra_summarize_function): Likewise.
	* params.opt: Rename ipcp-unit-growth to
	ipa-cp-unit-growth.  Add Optimization for various
	IPA-related parameters.

2020-01-09  Richard Biener  <rguenther@suse.de>

	PR middle-end/93054
	* gimplify.c (gimplify_expr): Deal with NOP definitions.

2020-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93040
	* gimple-ssa-store-merging.c (find_bswap_or_nop): Raise search limit.

2020-01-09  Georg-Johann Lay  <avr@gjlay.de>

	* common/config/avr/avr-common.c (avr_option_optimization_table)
	[OPT_LEVELS_1_PLUS]: Set -fsplit-wide-types-early.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c (symbol_table::materialize_all_clones):
	Use cgraph_node::dump_name.

2020-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/93202
	* config/riscv/riscv.c (riscv_print_operand_reloc): Use
	output_operand_lossage instead of gcc_unreachable.
	* doc/md.texi (riscv f constraint): Fix typo.

	PR target/93141
	* config/i386/i386.md (subv<mode>4): Use SWIDWI iterator instead of
	SWI.  Use <general_hilo_operand> instead of <general_operand>.  Use
	CONST_SCALAR_INT_P instead of CONST_INT_P.
	(*subv<mode>4_1): Rename to ...
	(subv<mode>4_1): ... this.
	(*subv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
	define_insn_and_split patterns.
	(*subv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
	patterns.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* vec.c (class selftest::count_dtor): New class.
	(selftest::test_auto_delete_vec): New test.
	(selftest::vec_c_tests): Call it.
	* vec.h (class auto_delete_vec): New class template.
	(auto_delete_vec<T>::~auto_delete_vec): New dtor.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* sbitmap.h (auto_sbitmap): Add operator const_sbitmap.

2020-01-08  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_legitimize_tls_address): Ifdef out
	use of TLS_MODEL_LOCAL_EXEC when not pic.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* hash-map-tests.c (selftest::test_map_of_strings_to_int): Fix
	memory leak.

2020-01-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/93187
	* config/i386/i386.md (*stack_protect_set_2_<mode> peephole2,
	*stack_protect_set_3 peephole2): Also check that the second
	insns source is general_operand.

	PR target/93174
	* config/i386/i386.md (addcarry<mode>_0): Use nonimmediate_operand
	predicate for output operand instead of register_operand.
	(addcarry<mode>, addcarry<mode>_1): Likewise.  Add alternative with
	memory destination and non-memory operands[2].

2020-01-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Use ::dump_name or
	::dump_asm_name instead of (::name or ::asm_name).
	* cgraphclones.c (symbol_table::materialize_all_clones): Likewise.
	* cgraphunit.c (walk_polymorphic_call_targets): Likewise.
	(analyze_functions): Likewise.
	(expand_all_functions): Likewise.
	* ipa-cp.c (ipcp_cloning_candidate_p): Likewise.
	(propagate_bits_across_jump_function): Likewise.
	(dump_profile_updates): Likewise.
	(ipcp_store_bits_results): Likewise.
	(ipcp_store_vr_results): Likewise.
	* ipa-devirt.c (dump_targets): Likewise.
	* ipa-fnsummary.c (analyze_function_body): Likewise.
	* ipa-hsa.c (check_warn_node_versionable): Likewise.
	(process_hsa_functions): Likewise.
	* ipa-icf.c (sem_item_optimizer::merge_classes): Likewise.
	(set_alias_uids): Likewise.
	* ipa-inline-transform.c (save_inline_function_body): Likewise.
	* ipa-inline.c (recursive_inlining): Likewise.
	(inline_to_all_callers_1): Likewise.
	(ipa_inline): Likewise.
	* ipa-profile.c (ipa_propagate_frequency_1): Likewise.
	(ipa_propagate_frequency): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
	(remove_described_reference): Likewise.
	* ipa-pure-const.c (worse_state): Likewise.
	(check_retval_uses): Likewise.
	(analyze_function): Likewise.
	(propagate_pure_const): Likewise.
	(propagate_nothrow): Likewise.
	(dump_malloc_lattice): Likewise.
	(propagate_malloc): Likewise.
	(pass_local_pure_const::execute): Likewise.
	* ipa-visibility.c (optimize_weakref): Likewise.
	(function_and_variable_visibility): Likewise.
	* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
	(ipa_discover_variable_flags): Likewise.
	* lto-streamer-out.c (output_function): Likewise.
	(output_constructor): Likewise.
	* tree-inline.c (copy_bb): Likewise.
	* tree-ssa-structalias.c (ipa_pta_execute): Likewise.
	* varpool.c (symbol_table::remove_unreferenced_decls): Likewise.

2020-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (sink_clobbers): Update virtual operands for
	the first and last stmt only.  Add a dry-run capability.
	(pass_lower_eh_dispatch::execute): Perform clobber sinking
	after CFG manipulations and in RPO order to catch all
	secondary opportunities reliably.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	PR target/93182
	* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

2019-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* gimple-fold.c (rewrite_to_defined_overflow): Mark stmt modified.
	* tree-ssa-loop-im.c (move_computations_worker): Properly adjust
	virtual operand, also updating SSA use.
	* gimple-loop-interchange.cc (loop_cand::undo_simple_reduction):
	Update stmt after resetting virtual operand.
	(tree_loop_interchange::move_code_to_inner_loop): Likewise.
	* gimple-iterator.c (gsi_remove): When not removing the stmt
	permanently do not delink immediate uses or mark the stmt modified.

2020-01-08  Martin Liska  <mliska@suse.cz>

	* ipa-fnsummary.c (dump_ipa_call_summary): Use symtab_node::dump_name.
	(ipa_call_context::estimate_size_and_time): Likewise.
	(inline_analyze_function): Likewise.

2020-01-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Use systematically
	dump_asm_name.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	Add -nodevicespecs option for avr.

	PR target/93182
	* config/avr/avr.opt (-nodevicespecs): New driver option.
	* config/avr/driver-avr.c (avr_devicespecs_file): Only issue
	"-specs=device-specs/..." if that option is not set.
	* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	Implement 64-bit double functions for avr.

	PR target/92055
	* config.gcc (tm_defines) [target=avr]: Support --with-libf7,
	--with-double-comparison.
	* doc/install.texi: Document them.
	* config/avr/avr-c.c (avr_cpu_cpp_builtins)
	<WITH_LIBF7_LIBGCC, WITH_LIBF7_MATH, WITH_LIBF7_MATH_SYMBOLS>
	<WITH_DOUBLE_COMPARISON>: New built-in defines.
	* doc/invoke.texi (AVR Built-in Macros): Document them.
	* config/avr/avr-protos.h (avr_float_lib_compare_returns_bool): New.
	* config/avr/avr.c (avr_float_lib_compare_returns_bool): New function.
	* config/avr/avr.h (FLOAT_LIB_COMPARE_RETURNS_BOOL): New macro.

2020-01-08  Richard Earnshaw  <rearnsha@arm.com>

	PR target/93188
	* config/arm/t-multilib (MULTILIB_MATCHES): Add rules to match
	armv7-a{+mp,+sec,+mp+sec} to appropriate armv7 multilib variants
	when only building rm-profile multilibs.

2020-01-08  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93084
	* ipa-cp.c (self_recursively_generated_p): Find matched aggregate
	lattice for a value to check.
	(propagate_vals_across_arith_jfunc): Add an assertion to ensure
	finite propagation in self-recursive scc.

2020-01-08  Luo Xiong Hu  <luoxhu@linux.ibm.com>

	* ipa-inline.c (caller_growth_limits): Restore the AND.

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (VEC_1REG_INT_ALT): Delete iterator.
	(VEC_ALLREG_ALT): New iterator.
	(VEC_ALLREG_INT_MODE): New iterator.
	(VCMP_MODE): New iterator.
	(VCMP_MODE_INT): New iterator.
	(vec_cmpu<mode>di): Use VCMP_MODE_INT.
	(vec_cmp<u>v64qidi): New define_expand.
	(vec_cmp<mode>di_exec): Use VCMP_MODE.
	(vec_cmpu<mode>di_exec): New define_expand.
	(vec_cmp<u>v64qidi_exec): New define_expand.
	(vec_cmp<mode>di_dup): Use VCMP_MODE.
	(vec_cmp<mode>di_dup_exec): Use VCMP_MODE.
	(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>): Rename ...
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>): ... to this.
	(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Rename ...
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>_exec): ... to this.
	(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>): Rename ...
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>): ... to this.
	(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Rename ...
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>_exec): ... to
	this.
	* config/gcn/gcn.c (print_operand): Fix 8 and 16 bit suffixes.
	* config/gcn/gcn.md (expander): Add sign_extend and zero_extend.

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/constraints.md (DA): Update description and match.
	(DB): Likewise.
	(Db): New constraint.
	* config/gcn/gcn-protos.h (gcn_inline_constant64_p): Add second
	parameter.
	* config/gcn/gcn.c (gcn_inline_constant64_p): Add 'mixed' parameter.
	Implement 'Db' mixed immediate type.
	* config/gcn/gcn-valu.md (addcv64si3<exec_vcc>): Rework constraints.
	(addcv64si3_dup<exec_vcc>): Delete.
	(subcv64si3<exec_vcc>): Rework constraints.
	(addv64di3): Rework constraints.
	(addv64di3_exec): Rework constraints.
	(subv64di3): Rework constraints.
	(addv64di3_dup): Delete.
	(addv64di3_dup_exec): Delete.
	(addv64di3_zext): Rework constraints.
	(addv64di3_zext_exec): Rework constraints.
	(addv64di3_zext_dup): Rework constraints.
	(addv64di3_zext_dup_exec): Rework constraints.
	(addv64di3_zext_dup2): Rework constraints.
	(addv64di3_zext_dup2_exec): Rework constraints.
	(addv64di3_sext_dup2): Rework constraints.
	(addv64di3_sext_dup2_exec): Rework constraints.

2020-01-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* doc/sourcebuild.texi (arm_little_endian, arm_nothumb): Documented
	existing target checks.

2020-01-07  Richard Biener  <rguenther@suse.de>

	* doc/install.texi: Bump minimal supported MPC version.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* langhooks-def.h (lhd_simulate_enum_decl): Declare.
	(LANG_HOOKS_SIMULATE_ENUM_DECL): Use it.
	* langhooks.c: Include stor-layout.h.
	(lhd_simulate_enum_decl): New function.
	* config/aarch64/aarch64-sve-builtins.cc (init_builtins): Call
	handle_arm_sve_h for the LTO frontend.
	(register_vector_type): Cope with null returns from pushdecl.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve::svbool_type_p)
	(aarch64_sve::nvectors_if_data_type): Replace with...
	(aarch64_sve::builtin_type_p): ...this.
	* config/aarch64/aarch64-sve-builtins.cc: Include attribs.h.
	(find_vector_type): Delete.
	(add_sve_type_attribute): New function.
	(lookup_sve_type_attribute): Likewise.
	(register_builtin_types): Add an "SVE type" attribute to each type.
	(register_tuple_type): Likewise.
	(svbool_type_p, nvectors_if_data_type): Delete.
	(mangle_builtin_type): Use lookup_sve_type_attribute.
	(builtin_type_p): Likewise.  Add an overload that returns the
	number of constituent vector and predicate registers.
	* config/aarch64/aarch64.c (aarch64_sve_argument_p): Delete.
	(aarch64_returns_value_in_sve_regs_p): Use aarch64_sve::builtin_type_p
	instead of aarch64_sve_argument_p.
	(aarch64_takes_arguments_in_sve_regs_p): Likewise.
	(aarch64_pass_by_reference): Likewise.
	(aarch64_function_value_1): Likewise.
	(aarch64_return_in_memory): Likewise.
	(aarch64_layout_arg): Likewise.

2020-01-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93156
	* tree-ssa-ccp.c (bit_value_binop): For x * x note that the second
	least significant bit is always clear.

	PR tree-optimization/93118
	* match.pd ((x >> c) << c -> x & (-1<<c)): Add nop_convert?.  Add new
	simplifier with two intermediate conversions.

2020-01-07  Martin Liska  <mliska@suse.cz>

	* params.opt: Add Optimization for various parameters.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR ipa/83411
	* doc/extend.texi: Explain cloning for target_clone
	attribute.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* common.opt: Make in Optimization option
	as it is affected by -O0, which is an Optimization
	option.
	* tree-inline.c (tree_inlinable_function_p):
	Use opt_for_fn for warn_inline.
	(expand_call_inline): Likewise.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* common.opt: Make flag_ree as optimization
	attribute. 

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR optimization/92860
	* params.opt: Mark param_min_crossjump_insns with Optimization
	keyword.

2020-01-07  Luo Xiong Hu  <luoxhu@linux.ibm.com>

	* ipa-inline-analysis.c (estimate_growth): Fix typo.
	* ipa-inline.c (caller_growth_limits): Use OR instead of AND.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (hard_reg_and_mode_to_addr_mask): New
	helper function to return the valid addressing formats for a given
	hard register and mode.
	(rs6000_adjust_vec_address): Call hard_reg_and_mode_to_addr_mask.

	* config/rs6000/constraints.md (Q constraint): Update
	documentation.
	* doc/md.texi (RS/6000 constraints): Update 'Q' cosntraint
	documentation.

	* config/rs6000/vsx.md (vsx_extract_<mode>_var, VSX_D iterator):
	Use 'Q' for doing vector extract from memory.
	(vsx_extract_v4sf_var): Use 'Q' for doing vector extract from
	memory.
	(vsx_extract_<mode>_var, VSX_EXTRACT_I iterator): Use 'Q' for
	doing vector extract from memory.
	(vsx_extract_<mode>_<VS_scalar>mode_var): Use 'Q' for doing vector
	extract from memory.

	* config/rs6000/rs6000.c (rs6000_adjust_vec_address): Add support
	for the offset being 34-bits when -mcpu=future is used.

2020-01-06  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.md: Revert change to use ordered_comparison_operator
	instead of cmpib_comparison_operator in cmpib patterns.
	* config/pa/predicates.md (cmpib_comparison_operator): Revert removal
	of cmpib_comparison_operator.  Revise comment.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_build_slp_tree_1): Require all shifts
	in an IFN_DIV_POW2 node to be equal.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_check_load_store_mask): Rename to...
	(vect_check_scalar_mask): ...this.
	(vectorizable_store, vectorizable_load): Update call accordingly.
	(vectorizable_call): Use vect_check_scalar_mask to check the mask
	argument in calls to conditional internal functions.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (subv64di3): Use separate alternatives for
	'0' matching inputs.
	(subv64di3_exec): Likewise.

2020-01-06  Bryan Stenson  <bryan@siliconvortex.com>

	* config/mips/mips.c (vr4130_align_insns): Fix typo.
	* doc/md.texi (movstr): Likewise.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (vec_extract<mode><scalar_mode>): Add early
	clobber.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/t-aarch64 ($(srcdir)/config/aarch64/aarch64-tune.md):
	Depend on...
	(s-aarch64-tune-md): ...this new stamp file.  Pipe the new contents
	to a temporary file and use move-if-change to update the real
	file where necessary.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (@aarch64_sel_dup<mode>): Use Upl
	rather than Upa for CPY /M.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_inline_constant_p): Allow 64 as an inline
	immediate.

2020-01-06  Martin Liska  <mliska@suse.cz>

    PR tree-optimization/92860
    * params.opt: Mark param_max_combine_insns with Optimization
    keyword. 

2020-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/93141
	* config/i386/i386.md (SWIDWI): New mode iterator.
	(DWI, dwi): Add TImode variants.
	(addv<mode>4): Use SWIDWI iterator instead of SWI.  Use
	<general_hilo_operand> instead of <general_operand>.  Use
	CONST_SCALAR_INT_P instead of CONST_INT_P.
	(*addv<mode>4_1): Rename to ...
	(addv<mode>4_1): ... this.
	(QWI): New mode attribute.
	(*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
	define_insn_and_split patterns.
	(*addv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
	patterns.
	(uaddv<mode>4): Use SWIDWI iterator instead of SWI.  Use
	<general_hilo_operand> instead of <general_operand>.
	(*addcarry<mode>_1): New define_insn.
	(*add<dwi>3_doubleword_cc_overflow_1): New define_insn_and_split.

2020-01-03  Konstantin Kharlamov  <Hi-Angel@yandex.ru>

	* gdbinit.in (pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, pdd, pbs, pbm):
	Use "call" instead of "set".

2020-01-03  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92917
	* ipa-cp.c (print_all_lattices): Skip functions without info.

2020-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/93089
	* config/i386/i386-options.c (ix86_simd_clone_adjust): If
	TARGET_PREFER_AVX128, use prefer-vector-width=256 for 'c' and 'd'
	simd clones.  If TARGET_PREFER_AVX256, use prefer-vector-width=512
	for 'e' simd clones.

	PR target/93089
	* config/i386/i386.opt (x_prefer_vector_width_type): Remove TargetSave
	entry.
	(mprefer-vector-width=): Add Save.
	* config/i386/i386-options.c (ix86_target_string): Add PVW argument, print
	-mprefer-vector-width= if non-zero.  Fix up -mfpmath= comment.
	(ix86_debug_options, ix86_function_specific_print): Adjust
	ix86_target_string callers.
	(ix86_valid_target_attribute_inner_p): Handle prefer-vector-width=.
	(ix86_valid_target_attribute_tree): Likewise.
	* config/i386/i386-options.h (ix86_target_string): Add PVW argument.
	* config/i386/i386-expand.c (ix86_expand_builtin): Adjust
	ix86_target_string caller.

	PR target/93110
	* config/i386/i386.md (abs<mode>2): Use expand_simple_binop instead of
	emitting ASHIFTRT, XOR and MINUS by hand.  Use gen_int_mode with QImode
	instead of gen_int_shift_amount + convert_modes.

	PR rtl-optimization/93088
	* loop-iv.c (find_single_def_src): Punt after looking through
	128 reg copies for regs with single definitions.  Move definitions
	to first uses.

2020-01-02  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm-c.c (arm_cpu_builtins): Define
	__ARM_FEATURE_MATMUL_INT8, __ARM_FEATURE_BF16_VECTOR_ARITHMETIC,
	__ARM_FEATURE_BF16_SCALAR_ARITHMETIC, and
	__ARM_BF16_FORMAT_ALTERNATIVE when enabled.
	* config/arm/arm-cpus.in (armv8_6, i8mm, bf16): New features.
	* config/arm/arm-tables.opt: Regenerated.
	* config/arm/arm.c (arm_option_reconfigure_globals): Initialize
	arm_arch_i8mm and arm_arch_bf16 when enabled.
	* config/arm/arm.h (TARGET_I8MM): New macro.
	(TARGET_BF16_FP, TARGET_BF16_SIMD): Likewise.
	* config/arm/t-aprofile: Add matching rules for -march=armv8.6-a.
	* config/arm/t-arm-elf (all_v8_archs): Add armv8.6-a.
	* config/arm/t-multilib: Add matching rules for -march=armv8.6-a.
	(v8_6_a_simd_variants): New.
	(v8_*_a_simd_variants): Add i8mm and bf16.
	* doc/invoke.texi (armv8.6-a, i8mm, bf16): Document new options.

2020-01-02  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/93087
	* predict.c (compute_function_frequency): Don't call
	warn_function_cold on functions that already have cold attribute.

2020-01-01  John David Anglin  <danglin@gcc.gnu.org>

	PR target/67834
	* config/pa/pa.c (pa_elf_select_rtx_section): New.  Put references to
	COMDAT group function labels in .data.rel.ro.local section.
	* config/pa/pa32-linux.h (TARGET_ASM_SELECT_RTX_SECTION): Define.

	PR target/93111
	* config/pa/pa.md (scc): Use ordered_comparison_operator instead of
	comparison_operator in B and S integer comparisons.  Likewise, use
	ordered_comparison_operator instead of cmpib_comparison_operator in
	cmpib patterns.
	* config/pa/predicates.md (cmpib_comparison_operator): Remove.

2020-01-01  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2020-01-01  Jan Hubicka  <hubicka@ucw.cz>

	* ipa.c (walk_polymorphic_call_targets): Fix updating of overall
	summary.

2020-01-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93098
	* match.pd (popcount): For shift amounts, use integer_onep
	or wi::to_widest () == cst instead of tree_to_uhwi () == cst
	tests.  Make sure that precision is power of two larger than or equal
	to 16.  Ensure shift is never negative.  Use HOST_WIDE_INT_UC macro
	instead of ULL suffixed constants.  Formatting fixes.

Copyright (C) 2020 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.