<?xml version="1.0" encoding="UTF-8"?>
<metadata xmlns="http://linux.duke.edu/metadata/common" xmlns:rpm="http://linux.duke.edu/metadata/rpm" packages="5">
<package type="rpm">
  <name>libecap</name>
  <arch>i686</arch>
  <version epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
  <checksum type="sha256" pkgid="YES">a07014e2d5f42c59d580b92158d7d5b6ef1c7727e78462494675b0320f13775b</checksum>
  <summary>Squid interface for embedded adaptation modules</summary>
  <description>eCAP is a software interface that allows a network application, such as an
HTTP proxy or an ICAP server, to outsource content analysis and adaptation to
a loadable module. For each applicable protocol message being processed, an
eCAP-enabled host application supplies the message details to the adaptation
module and gets back an adapted message, a "not interested" response, or a
"block this message now!" instruction. These exchanges often include message
bodies.

The adaptation module can also exchange meta-information with the host
application to supply additional details such as configuration options, a
reason behind the decision to ignore a message, or a detected virus name.

If you are familiar with the ICAP protocol (RFC 3507), then you may think of
eCAP as an "embedded ICAP", where network interactions with an ICAP server are
replaced with function calls to an adaptation module.</description>
  <packager></packager>
  <url>http://www.e-cap.org/</url>
  <time file="1606245252" build="1574564854"/>
  <size package="27008" installed="59397" archive="17996"/>
  <location href="libecap-1.0.1-2.module+el8.1.0+4044+36416a77.i686.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor></rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>focus.springdale.princeton.edu</rpm:buildhost>
    <rpm:sourcerpm>libecap-1.0.1-2.module+el8.1.0+4044+36416a77.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="1624" end="9012"/>
    <rpm:provides>
      <rpm:entry name="libecap" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap(x86-32)" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap.so.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libstdc++.so.6"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.9)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.15)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.21)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.9)"/>
      <rpm:entry name="rtld(GNU_HASH)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libecap</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
  <checksum type="sha256" pkgid="YES">3fb17c53ab6a2fb544a3b45a0fde901267083da09858fdd55a7fd0c7d19fcb27</checksum>
  <summary>Squid interface for embedded adaptation modules</summary>
  <description>eCAP is a software interface that allows a network application, such as an
HTTP proxy or an ICAP server, to outsource content analysis and adaptation to
a loadable module. For each applicable protocol message being processed, an
eCAP-enabled host application supplies the message details to the adaptation
module and gets back an adapted message, a "not interested" response, or a
"block this message now!" instruction. These exchanges often include message
bodies.

The adaptation module can also exchange meta-information with the host
application to supply additional details such as configuration options, a
reason behind the decision to ignore a message, or a detected virus name.

If you are familiar with the ICAP protocol (RFC 3507), then you may think of
eCAP as an "embedded ICAP", where network interactions with an ICAP server are
replaced with function calls to an adaptation module.</description>
  <packager></packager>
  <url>http://www.e-cap.org/</url>
  <time file="1606245252" build="1574564889"/>
  <size package="26056" installed="82133" archive="16956"/>
  <location href="libecap-1.0.1-2.module+el8.1.0+4044+36416a77.x86_64.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor></rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>focus.springdale.princeton.edu</rpm:buildhost>
    <rpm:sourcerpm>libecap-1.0.1-2.module+el8.1.0+4044+36416a77.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="1624" end="9100"/>
    <rpm:provides>
      <rpm:entry name="libecap" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap(x86-64)" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap.so.3()(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.9)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.15)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.21)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.9)(64bit)"/>
      <rpm:entry name="rtld(GNU_HASH)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.14)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libecap-devel</name>
  <arch>i686</arch>
  <version epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
  <checksum type="sha256" pkgid="YES">466b0086d4eeaa6e0cb08bf8376db75d7b0a3c670195c54cd633fe380dec7db4</checksum>
  <summary>Libraries and header files for the libecap library</summary>
  <description>This package provides the libraries, include files, and other
resources needed for developing libecap applications.</description>
  <packager></packager>
  <url>http://www.e-cap.org/</url>
  <time file="1606245252" build="1574564854"/>
  <size package="18088" installed="27515" archive="7864"/>
  <location href="libecap-devel-1.0.1-2.module+el8.1.0+4044+36416a77.i686.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor></rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>focus.springdale.princeton.edu</rpm:buildhost>
    <rpm:sourcerpm>libecap-1.0.1-2.module+el8.1.0+4044+36416a77.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="1624" end="10224"/>
    <rpm:provides>
      <rpm:entry name="libecap-devel" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap-devel(x86-32)" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="pkgconfig(libecap)" flags="EQ" epoch="0" ver="1.0.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libecap" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap.so.3"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libecap-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
  <checksum type="sha256" pkgid="YES">a979d6095fc9b01e76a2b15ec882a05e59639e9d68429b22ae0dc7e5208c7845</checksum>
  <summary>Libraries and header files for the libecap library</summary>
  <description>This package provides the libraries, include files, and other
resources needed for developing libecap applications.</description>
  <packager></packager>
  <url>http://www.e-cap.org/</url>
  <time file="1606245253" build="1574564889"/>
  <size package="18076" installed="27519" archive="7876"/>
  <location href="libecap-devel-1.0.1-2.module+el8.1.0+4044+36416a77.x86_64.rpm"/>
  <format>
    <rpm:license>BSD</rpm:license>
    <rpm:vendor></rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>focus.springdale.princeton.edu</rpm:buildhost>
    <rpm:sourcerpm>libecap-1.0.1-2.module+el8.1.0+4044+36416a77.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="1624" end="10200"/>
    <rpm:provides>
      <rpm:entry name="libecap-devel" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap-devel(x86-64)" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="pkgconfig(libecap)" flags="EQ" epoch="0" ver="1.0.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libecap" flags="EQ" epoch="0" ver="1.0.1" rel="2.module+el8.1.0+4044+36416a77"/>
      <rpm:entry name="libecap.so.3()(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>squid</name>
  <arch>x86_64</arch>
  <version epoch="7" ver="4.11" rel="3.module+el8.3.0+7851+7808b5f9"/>
  <checksum type="sha256" pkgid="YES">6c59749318a862b5ee303f035b61095102e95bc9a47f99e59c551296aa4b92a9</checksum>
  <summary>The Squid proxy caching server</summary>
  <description>Squid is a high-performance proxy caching server for Web clients,
supporting FTP, gopher, and HTTP data objects. Unlike traditional
caching software, Squid handles all requests in a single,
non-blocking, I/O-driven process. Squid keeps meta data and especially
hot objects cached in RAM, caches DNS lookups, supports non-blocking
DNS lookups, and implements negative caching of failed requests.

Squid consists of a main server program squid, a Domain Name System
lookup program (dnsserver), a program for retrieving FTP data
(ftpget), and some management and client tools.</description>
  <packager></packager>
  <url>http://www.squid-cache.org</url>
  <time file="1606245253" build="1605624290"/>
  <size package="3729812" installed="12219323" archive="3340292"/>
  <location href="squid-4.11-3.module+el8.3.0+7851+7808b5f9.x86_64.rpm"/>
  <format>
    <rpm:license>GPLv2+ and (LGPLv2+ and MIT and BSD and Public Domain)</rpm:license>
    <rpm:vendor></rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>focus.springdale.princeton.edu</rpm:buildhost>
    <rpm:sourcerpm>squid-4.11-3.module+el8.3.0+7851+7808b5f9.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="1624" end="389520"/>
    <rpm:provides>
      <rpm:entry name="config(squid)" flags="EQ" epoch="7" ver="4.11" rel="3.module+el8.3.0+7851+7808b5f9"/>
      <rpm:entry name="squid" flags="EQ" epoch="7" ver="4.11" rel="3.module+el8.3.0+7851+7808b5f9"/>
      <rpm:entry name="squid(x86-64)" flags="EQ" epoch="7" ver="4.11" rel="3.module+el8.3.0+7851+7808b5f9"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/perl"/>
      <rpm:entry name="bash" flags="GE" epoch="0" ver="2.0"/>
      <rpm:entry name="libcap.so.2()(64bit)"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libcrypt.so.1()(64bit)"/>
      <rpm:entry name="libcrypt.so.1(XCRYPT_2.0)(64bit)"/>
      <rpm:entry name="libcrypto.so.1.1()(64bit)"/>
      <rpm:entry name="libcrypto.so.1.1(OPENSSL_1_1_0)(64bit)"/>
      <rpm:entry name="libdb-5.3.so()(64bit)"/>
      <rpm:entry name="libdl.so.2()(64bit)"/>
      <rpm:entry name="libecap.so.3()(64bit)"/>
      <rpm:entry name="libexpat.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1()(64bit)"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.0)(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="liblber-2.4.so.2()(64bit)"/>
      <rpm:entry name="libldap-2.4.so.2()(64bit)"/>
      <rpm:entry name="libltdl.so.7()(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpam.so.0()(64bit)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)(64bit)"/>
      <rpm:entry name="libpthread.so.0()(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libpthread.so.0(GLIBC_2.3.2)(64bit)"/>
      <rpm:entry name="libresolv.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="librt.so.1()(64bit)"/>
      <rpm:entry name="librt.so.1(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libsasl2.so.3()(64bit)"/>
      <rpm:entry name="libssl.so.1.1()(64bit)"/>
      <rpm:entry name="libssl.so.1.1(OPENSSL_1_1_0)(64bit)"/>
      <rpm:entry name="libstdc++.so.6()(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.3)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.5)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.8)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(CXXABI_1.3.9)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.11)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.14)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.15)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.18)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.20)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.21)(64bit)"/>
      <rpm:entry name="libstdc++.so.6(GLIBCXX_3.4.9)(64bit)"/>
      <rpm:entry name="libsystemd.so.0()(64bit)"/>
      <rpm:entry name="libsystemd.so.0(LIBSYSTEMD_209)(64bit)"/>
      <rpm:entry name="libxml2.so.2()(64bit)"/>
      <rpm:entry name="libxml2.so.2(LIBXML2_2.4.30)(64bit)"/>
      <rpm:entry name="libxml2.so.2(LIBXML2_2.6.0)(64bit)"/>
      <rpm:entry name="perl(DBI)"/>
      <rpm:entry name="perl(Data::Dumper)"/>
      <rpm:entry name="perl(Digest::MD5)"/>
      <rpm:entry name="perl(Digest::SHA)"/>
      <rpm:entry name="perl(English)"/>
      <rpm:entry name="perl(File::Basename)"/>
      <rpm:entry name="perl(FileHandle)"/>
      <rpm:entry name="perl(Getopt::Long)"/>
      <rpm:entry name="perl(Getopt::Std)"/>
      <rpm:entry name="perl(IPC::Open2)"/>
      <rpm:entry name="perl(Net::POP3)"/>
      <rpm:entry name="perl(Pod::Usage)"/>
      <rpm:entry name="perl(URI::URL)"/>
      <rpm:entry name="perl(strict)"/>
      <rpm:entry name="perl(vars)"/>
      <rpm:entry name="perl(warnings)"/>
      <rpm:entry name="rtld(GNU_HASH)"/>
      <rpm:entry name="shadow-utils" pre="1"/>
      <rpm:entry name="systemd" pre="1"/>
      <rpm:entry name="systemd"/>
      <rpm:entry name="libc.so.6(GLIBC_2.27)(64bit)"/>
    </rpm:requires>
    <file>/etc/NetworkManager/dispatcher.d/20-squid</file>
    <file>/etc/httpd/conf.d/squid.conf</file>
    <file>/etc/logrotate.d/squid</file>
    <file>/etc/pam.d/squid</file>
    <file type="dir">/etc/squid</file>
    <file>/etc/squid/cachemgr.conf</file>
    <file>/etc/squid/cachemgr.conf.default</file>
    <file>/etc/squid/errorpage.css</file>
    <file>/etc/squid/errorpage.css.default</file>
    <file>/etc/squid/mime.conf</file>
    <file>/etc/squid/mime.conf.default</file>
    <file>/etc/squid/squid.conf</file>
    <file>/etc/squid/squid.conf.default</file>
    <file>/etc/sysconfig/squid</file>
    <file>/usr/bin/purge</file>
    <file>/usr/bin/squidclient</file>
    <file>/usr/sbin/squid</file>
  </format>
</package>
</metadata>