# packages

pkgId: 6f08971eda59516fd8af029db984cd4add863341705e3243e524e54be83985b2
name: scrub
arch: src
version: 2.5.2
epoch: 0
release: 5.el7
summary: Disk scrubbing program
url: http://code.google.com/p/diskscrub/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/scrub-2.5.2-5.el7.src.rpm
checksum_type: sha256
description:
  Scrub writes patterns on files or disk devices to make
  retrieving the data more difficult.  It operates in one of three
  modes: 1) the special file corresponding to an entire disk is scrubbed
  and all data on it is destroyed;  2) a regular file is scrubbed and
  only the data in the file (and optionally its name in the directory
  entry) is destroyed; or 3) a regular file is created, expanded until
  the file system is full, then scrubbed as in 2).


pkgId: 21bb742aa82d2dd4fd13f98ed4a12ce7a152d2ae3d6dd80bd9a96a772b550838
name: sdparm
arch: src
version: 1.08
epoch: 0
release: 3.el7
summary: List or change SCSI/SATA disk parameters
url: http://sg.danny.cz/sg/sdparm.html
rpm_license: BSD
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sdparm-1.08-3.el7.src.rpm
checksum_type: sha256
description:
  SCSI disk parameters are held in mode pages. This utility lists or
  changes those parameters. Other SCSI devices (or devices that use the
  SCSI command set e.g. some SATA devices) such as CD/DVD and tape
  drives may also find parts of sdparm useful. Requires the linux kernel
  2.4 series or later. In the 2.6 series any device node the understands
  a SCSI command set may be used (e.g. /dev/sda). In the 2.4 series SCSI
  device node may be used.

  Fetches Vital Product Data pages. Can send commands to start or stop
  the media and load or unload removable media.

  Warning: It is possible (but unlikely) to change SCSI disk settings
  such that the disk stops operating or is slowed down. Use with care.


pkgId: a2b33cf7ba32ea1ddf100e51c1e5113bd6dd3504bdb8e6e8c32cafc752687b0d
name: seabios
arch: src
version: 1.9.1
epoch: 0
release: 5.el7
summary: Open-source legacy BIOS implementation
url: http://www.coreboot.org/SeaBIOS
rpm_license: LGPLv3
rpm_group: Applications/Emulators
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/seabios-1.9.1-5.el7.src.rpm
checksum_type: sha256
description:
  SeaBIOS is an open-source legacy BIOS implementation which can be used as
  a coreboot payload. It implements the standard BIOS calling interfaces
  that a typical x86 proprietary BIOS implements.


pkgId: 4c13ff6c0e488d40860107125a181e3b4f3e9a6c956d0ca9a975c9079c1c3217
name: seahorse
arch: src
version: 3.14.1
epoch: 0
release: 1.el7
summary: A GNOME application for managing encryption keys
url: https://wiki.gnome.org/Apps/Seahorse
rpm_license: GPLv2+ and LGPLv2+
rpm_group: User Interface/Desktops
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/seahorse-3.14.1-1.el7.src.rpm
checksum_type: sha256
description:
  Seahorse is a graphical interface for managing and using encryption keys.
  It also integrates with nautilus, gedit and other places for encryption
  operations.  It is a keyring manager.


pkgId: a1d15b84c7bf66f6e30cd449d97eaafcb9c3a66e815d0a27c2da75d32c788458
name: seahorse-nautilus
arch: src
version: 3.8.0
epoch: 0
release: 5.el7
summary: PGP encryption and signing for nautilus
url: https://live.gnome.org/Seahorse
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/seahorse-nautilus-3.8.0-5.el7.src.rpm
checksum_type: sha256
description:
  Seahorse nautilus is an extension for nautilus which allows encryption
  and decryption of OpenPGP files using GnuPG.


pkgId: d85b739430aa9985b3d7d5f3b26da40d9f743669bfa4906b17b87e1e967ddffb
name: sed
arch: src
version: 4.2.2
epoch: 0
release: 5.el7
summary: A GNU stream text editor
url: http://sed.sourceforge.net/
rpm_license: GPLv3+
rpm_group: Applications/Text
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sed-4.2.2-5.el7.src.rpm
checksum_type: sha256
description:
  The sed (Stream EDitor) editor is a stream or batch (non-interactive)
  editor.  Sed takes text as input, performs an operation or set of
  operations on the text and outputs the modified text.  The operations
  that sed performs (substitutions, deletions, insertions, etc.) can be
  specified in a script file or from the command line.


pkgId: 821775a488c5bfff7a639b0c03a5642451aa9465a78b950e21662807abd71558
name: sendmail
arch: src
version: 8.14.7
epoch: 0
release: 4.el7
summary: A widely used Mail Transport Agent (MTA)
url: http://www.sendmail.org/
rpm_license: Sendmail
rpm_group: System Environment/Daemons
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sendmail-8.14.7-4.el7.src.rpm
checksum_type: sha256
description:
  The Sendmail program is a very widely used Mail Transport Agent (MTA).
  MTAs send mail from one machine to another. Sendmail is not a client
  program, which you use to read your email. Sendmail is a
  behind-the-scenes program which actually moves your email over
  networks or the Internet to where you want it to go.

  If you ever need to reconfigure Sendmail, you will also need to have
  the sendmail-cf package installed. If you need documentation on
  Sendmail, you can install the sendmail-doc package.


pkgId: e9e3ab1d9d174a69596ea159c38428851e3da223872f553ce2434637d9bc592c
name: setools
arch: src
version: 3.3.8
epoch: 0
release: 1.1.el7
summary: Policy analysis tools for SELinux
url: http://oss.tresys.com/projects/setools
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/setools-3.3.8-1.1.el7.src.rpm
checksum_type: sha256
description:
  SETools is a collection of graphical tools, command-line tools, and
  libraries designed to facilitate SELinux policy analysis.

  This meta-package depends upon the main packages necessary to run
  SETools.


pkgId: 530086ba693c3b3dc042eab3112e954c3944fac4f73e1421212735e178c7f750
name: setroubleshoot
arch: src
version: 3.2.27.2
epoch: 0
release: 3.el7
summary: Helps troubleshoot SELinux problems
url: https://fedorahosted.org/setroubleshoot
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/setroubleshoot-3.2.27.2-3.el7.src.rpm
checksum_type: sha256
description:
  setroubleshoot GUI. Application that allows you to view setroubleshoot-server
  messages.
  Provides tools to help diagnose SELinux problems. When AVC messages
  are generated an alert can be generated that will give information
  about the problem and help track its resolution. Alerts can be configured
  to user preference. The same tools can be run on existing log files.


pkgId: 7c17edd7f735ad3e6df988bbd549835ebccc0a58dc8678f1cc130840e5cf9e5a
name: setroubleshoot-plugins
arch: src
version: 3.0.64
epoch: 0
release: 2.1.el7
summary: Analysis plugins for use with setroubleshoot
url: https://fedorahosted.org/setroubleshoot
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/setroubleshoot-plugins-3.0.64-2.1.el7.src.rpm
checksum_type: sha256
description:
  This package provides a set of analysis plugins for use with
  setroubleshoot. Each plugin has the capacity to analyze SELinux AVC
  data and system data to provide user friendly reports describing how
  to interpret SELinux AVC denials.


pkgId: c5f440d60c024fbf4ec22b3bcfcb6962d08bfd4f57e3ebb981bfa2631fab06c1
name: setserial
arch: src
version: 2.17
epoch: 0
release: 33.el7
summary: A utility for configuring serial ports
url: http://setserial.sourceforge.net/
rpm_license: GPL+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/setserial-2.17-33.el7.src.rpm
checksum_type: sha256
description:
  Setserial is a basic system utility for displaying or setting serial
  port information. Setserial can reveal and allow you to alter the I/O
  port and IRQ that a particular serial device is using, and more.


pkgId: fd96deb30bd29621badbc3cbc0369566e343be89f796804bb100fd6f55365d29
name: setup
arch: src
version: 2.8.71
epoch: 0
release: 7.el7
summary: A set of system configuration and setup files
url: https://fedorahosted.org/setup/
rpm_license: Public Domain
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/setup-2.8.71-7.el7.src.rpm
checksum_type: sha256
description:
  The setup package contains a set of important system configuration and
  setup files, such as passwd, group, and profile.


pkgId: 132577f08c4dbc7e0cc8d8f17e6d11a97af571fc04973782ead74e3feee08e29
name: setuptool
arch: src
version: 1.19.11
epoch: 0
release: 8.el7
summary: A text mode system configuration tool
url: http://git.fedorahosted.org/git/?p=setuptool.git
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/setuptool-1.19.11-8.el7.src.rpm
checksum_type: sha256
description:
  Setuptool is a user-friendly text mode menu utility which allows you
  to access all of the text mode configuration programs included in the
  operating system distribution.


pkgId: 6d733008fc79f5b5ed0929c438984240cd7e14d8813c2c0e7a071b0c18ce56ff
name: sg3_utils
arch: src
version: 1.37
epoch: 0
release: 9.el7
summary: Utilities for devices that use SCSI command sets
url: http://sg.danny.cz/sg/sg3_utils.html
rpm_license: GPLv2+ and BSD
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sg3_utils-1.37-9.el7.src.rpm
checksum_type: sha256
description:
  Collection of Linux utilities for devices that use the SCSI command set.
  Includes utilities to copy data based on "dd" syntax and semantics (called
  sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
  mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
  disks (sg_start); do self tests (sg_senddiag); and various other functions.
  See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
  series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
  must be used. In the 2.6 series other device names may be used as
  well (e.g. /dev/sda).

  Warning: Some of these tools access the internals of your system
  and the incorrect usage of them may render your system inoperable.


pkgId: b8eeed635d5d9423ef49793a7489974b239159d7fa9a74c1cf79947d77d3d198
name: sgabios
arch: src
version: 0.20110622svn
epoch: 1
release: 4.el7
summary: Open-source serial graphics BIOS option rom
url: http://code.google.com/p/sgabios/
rpm_license: ASL 2.0
rpm_group: Applications/Emulators
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sgabios-0.20110622svn-4.el7.src.rpm
checksum_type: sha256
description:
  SGABIOS is designed to be inserted into a BIOS as an option rom to provide over
  a serial port the display and input capabilities normally handled by a VGA
  adapter and a keyboard, and additionally provide hooks for logging displayed
  characters for later collection after an operating system boots.


pkgId: 9280e3be485fb1a409c9202e130e1e8febc71012d47bd175e32ec00cd95c3568
name: sgml-common
arch: src
version: 0.6.3
epoch: 0
release: 39.el7
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL+
rpm_group: Applications/Text
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sgml-common-0.6.3-39.el7.src.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 02db94828d914fbaf515128925c4a69996daea7a2d7f0b390dde4ad04a3703de
name: shadow-utils
arch: src
version: 4.1.5.1
epoch: 2
release: 24.el7
summary: Utilities for managing accounts and shadow password files
url: http://pkg-shadow.alioth.debian.org/
rpm_license: BSD and GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/shadow-utils-4.1.5.1-24.el7.src.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates a passwd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: 1b1c1bca20ae821761498a95e902a122ac356d8790d898c9e9557ab77376164c
name: shared-desktop-ontologies
arch: src
version: 0.11.0
epoch: 0
release: 2.el7
summary: Shared ontologies needed for semantic environments
url: http://oscaf.sourceforge.net/
rpm_license: (BSD or CC-BY) and CC-BY and W3C
rpm_group: User Interface/Desktops
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/shared-desktop-ontologies-0.11.0-2.el7.src.rpm
checksum_type: sha256
description:
  The vision of the Social Semantic Desktop defines a user’s personal
  information environment as a source and end-point of the Semantic Web:
  Knowledge workers comprehensively express their information and data
  with respect to their own conceptualizations.

  Semantic Web languages and protocols are used to formalize these
  conceptualizations and for coordinating local and global information
  access. The Resource Description Framework serves as a common data
  representation format. With a particular focus on addressing certain
  limitations of RDF, a novel representational language akin to RDF and
  the Web Ontology Language, plus a number of other high-level
  ontologies were created.

  Together, they provide a means to build the semantic bridges necessary
  for data exchange and application integration on distributed social
  semantic desktops. Although initially designed to fulfill requirements
  for the Nepomuk project, these ontologies are useful for the semantic
  web community in general.


pkgId: b0421b6340e397ee8588a8328f1a70b74660e68b5c2cfb744bd66091f7176559
name: shared-mime-info
arch: src
version: 1.1
epoch: 0
release: 9.el7
summary: Shared MIME information database
url: http://freedesktop.org/Software/shared-mime-info
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/shared-mime-info-1.1-9.el7.src.rpm
checksum_type: sha256
description:
  This is the freedesktop.org shared MIME info database.

  Many programs and desktops use the MIME system to represent the types of
  files. Frequently, it is necessary to work out the correct MIME type for
  a file. This is generally done by examining the file's name or contents,
  and looking up the correct MIME type in a database.


pkgId: 4bdedea444c3d9c66472e72ec3ac79c67b14c5cce80c246b37a0a43a4ad23808
name: sharutils
arch: src
version: 4.13.3
epoch: 0
release: 8.el7
summary: The GNU shar utilities for packaging and unpackaging shell archives
url: http://www.gnu.org/software/sharutils/
rpm_license: GPLv3+ and LGPLv3+ and (LGPLv3+ or BSD) and LGPLv2+ and Public Domain and GFDL
rpm_group: Applications/Archiving
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sharutils-4.13.3-8.el7.src.rpm
checksum_type: sha256
description:
  The sharutils package contains the GNU shar utilities, a set of tools
  for encoding and decoding packages of files (in binary or text format)
  in a special plain text format called shell archives (shar).  This
  format can be sent through e-mail (which can be problematic for regular
  binary files).  The shar utility supports a wide range of capabilities
  (compressing, uuencoding, splitting long files for multi-part
  mailings, providing check-sums), which make it very flexible at
  creating shar files.  After the files have been sent, the unshar tool
  scans mail messages looking for shar files.  Unshar automatically
  strips off mail headers and introductory text and then unpacks the
  shar files.


pkgId: 09c3947aad3488328076b278a6f6a02f49d99cb51abb1cfa6ec7c6c805337e53
name: shim
arch: src
version: 0.9
epoch: 0
release: 1.el7
summary: First-stage UEFI bootloader
url: http://www.codon.org.uk/~mjg59/shim/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/shim-0.9-1.el7.src.rpm
checksum_type: sha256
description:
  Initial UEFI bootloader that handles chaining to a trusted full bootloader
  under secure boot environments.


pkgId: 3e407fc00ecf7d45490fc6cb194ced9c82f3eb94e717569d210a4be77875de35
name: shim-signed
arch: src
version: 0.9
epoch: 0
release: 2.el7
summary: First-stage UEFI bootloader
url: http://www.codon.org.uk/~mjg59/shim/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/shim-signed-0.9-2.el7.src.rpm
checksum_type: sha256
description:
  Initial UEFI bootloader that handles chaining to a trusted full bootloader
  under secure boot environments. This package contains the version signed by
  the UEFI signing service.


pkgId: e399fb1b4d6ca8aa6460039c4aef788fae907519542db13c5d84ea39b1a0f388
name: shotwell
arch: src
version: 0.14.1
epoch: 0
release: 5.el7
summary: A photo organizer for the GNOME desktop
url: http://www.yorba.org/shotwell/
rpm_license: LGPLv2+ and CC-BY-SA
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/shotwell-0.14.1-5.el7.src.rpm
checksum_type: sha256
description:
  Shotwell is a new open source photo organizer designed for the GNOME desktop
  environment. It allows you to import photos from your camera, view and edit
  them, and share them with others.


pkgId: a049ef74aa56ca44c6eb128505dde94a04d667171ebcfda3878770dedbd8eb02
name: sil-abyssinica-fonts
arch: src
version: 1.200
epoch: 0
release: 6.el7
summary: SIL Abyssinica fonts
url: http://scripts.sil.org/AbyssinicaSIL
rpm_license: OFL
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sil-abyssinica-fonts-1.200-6.el7.src.rpm
checksum_type: sha256
description:
  SIL Abyssinica is a Unicode typeface family containing glyphs for the
  Ethiopic script.

  The Ethiopic script is used for writing many of the languages of Ethiopia and
  Eritrea. Abyssinica SIL supports all Ethiopic characters which are in Unicode
  including the Unicode 4.1 extensions. Some languages of Ethiopia are not yet
  able to be fully represented in Unicode and, where necessary, we have included
  non-Unicode characters in the Private Use Area (see Private-use (PUA)
  characters supported by Abyssinica SIL).

  Abyssinica SIL is based on Ethiopic calligraphic traditions. This release is
  a regular typeface, with no bold or italic version available or planned.


pkgId: 06b3c12c90a29f27276cd56b542cca263c304e199f80f0bc313900348bd7dd3d
name: sil-nuosu-fonts
arch: src
version: 2.1.1
epoch: 0
release: 5.el7
summary: The Nuosu SIL Font
url: http://scripts.sil.org/SILYi_home
rpm_license: OFL
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sil-nuosu-fonts-2.1.1-5.el7.src.rpm
checksum_type: sha256
description:
  The Nuosu SIL Font is a single Unicode font for the standardized Yi script
  used by a large ethnic group in southwestern China.
  Until this version, the font was called SIL Yi.


pkgId: df25fd61ac1c2cfa66e8161588b862fd467d50c3f55c15b9b3f383bd91f25287
name: sil-padauk-fonts
arch: src
version: 2.8
epoch: 0
release: 5.el7
summary: A font for Burmese and the Myanmar script
url: http://scripts.sil.org/Padauk
rpm_license: OFL
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sil-padauk-fonts-2.8-5.el7.src.rpm
checksum_type: sha256
description:
  Padauk is a Myanmar font covering all currently used characters
  in the Myanmar block. The font aims to cover all minority language needs.
  At the moment, these do not extend to stylistic variation needs.
  The font is a smart font using a Graphite description.

  %_font_pkg -f 65-sil-padauk.conf Padauk.ttf Padauk-bold.ttf
  %doc *.txt


pkgId: 76b41f46aa40eecd8899d3d2c6aaf734989438e9653e8db0f1f6020091e9c37f
name: sip
arch: src
version: 4.14.6
epoch: 0
release: 4.el7
summary: SIP - Python/C++ Bindings Generator
url: http://www.riverbankcomputing.com/software/sip/intro
rpm_license: GPLv2 or GPLv3 and (GPLv3+ with exceptions)
rpm_group: Development/Tools
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sip-4.14.6-4.el7.src.rpm
checksum_type: sha256
description:
  SIP is a tool for generating bindings for C++ classes so that they can be
  accessed as normal Python classes. SIP takes many of its ideas from SWIG but,
  because it is specifically designed for C++ and Python, is able to generate
  tighter bindings. SIP is so called because it is a small SWIG.

  SIP was originally designed to generate Python bindings for KDE and so has
  explicit support for the signal slot mechanism used by the Qt/KDE class
  libraries. However, SIP can be used to generate Python bindings for any C++
  class library.


pkgId: 66302b7dd22745a85d146d160d07006c719aa32b6f973784a45101eb3a6e04d9
name: sisu
arch: src
version: 2.3.0
epoch: 0
release: 11.el7
summary: Sonatype dependency injection framework
url: http://github.com/sonatype/sisu
rpm_license: ASL 2.0 and EPL and MIT
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sisu-2.3.0-11.el7.src.rpm
checksum_type: sha256
description:
  Java dependency injection framework with backward support for plexus and bean
  style dependency injection.


pkgId: 5a5f5e07594114b484f2fb65b8ce5bce0cff4b3f82e1e725fdaa2623c1c1e958
name: sisu-maven-plugin
arch: src
version: 1.1
epoch: 0
release: 8.el7
summary: Sisu plugin for Apache Maven
url: http://sonatype.github.com/sisu-maven-plugin/
rpm_license: ASL 2.0 or EPL
rpm_group: Development/Tools
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sisu-maven-plugin-1.1-8.el7.src.rpm
checksum_type: sha256
description:
  The Sisu Plugin for Maven provides mojos to generate
  META-INF/sisu/javax.inject.Named index files for the Sisu container.


pkgId: 41845115df12e715330b7178280b74e723a5ca31a95cfaab6453c596c1deffe1
name: skkdic
arch: src
version: 20130104
epoch: 0
release: 6.T1435.el7
summary: Dictionaries for SKK (Simple Kana-Kanji conversion program)
url: http://openlab.ring.gr.jp/skk/skk/dic/
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/skkdic-20130104-6.T1435.el7.src.rpm
checksum_type: sha256
description:
  This package includes the SKK dictionaries, including the large dictionary
  SKK-JISYO.L and pubdic+ dictionary.


pkgId: dc76e155fa272682cb183b5641a03490dd1a91f97ce836eab0ff99b2d17fdd46
name: slang
arch: src
version: 2.2.4
epoch: 0
release: 11.el7
summary: The shared library for the S-Lang extension language
url: http://www.jedsoft.org/slang/
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/slang-2.2.4-11.el7.src.rpm
checksum_type: sha256
description:
  S-Lang is an interpreted language and a programming library.  The
  S-Lang language was designed so that it can be easily embedded into
  a program to provide the program with a powerful extension language.
  The S-Lang library, provided in this package, provides the S-Lang
  extension language.  S-Lang's syntax resembles C, which makes it easy
  to recode S-Lang procedures in C if you need to.


pkgId: 13c89e34d2de368dbd44be5734a7feeb1860e04db05ff7028f945fd633c80ae8
name: slapi-nis
arch: src
version: 0.56.0
epoch: 0
release: 4.el7
summary: NIS Server and Schema Compatibility plugins for Directory Server
url: http://slapi-nis.fedorahosted.org/
rpm_license: GPLv2
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/slapi-nis-0.56.0-4.el7.src.rpm
checksum_type: sha256
description:
  This package provides two plugins for Red Hat and 389 Directory Server.

  The NIS Server plugin allows the directory server to act as a NIS server
  for clients, dynamically generating and updating NIS maps according to
  its configuration and the contents of the DIT, and serving the results to
  clients using the NIS protocol as if it were an ordinary NIS server.

  The Schema Compatibility plugin allows the directory server to provide an
  alternate view of entries stored in part of the DIT, optionally adding,
  dropping, or renaming attribute values, and optionally retrieving values
  for attributes from multiple entries in the tree.


pkgId: 4be1fbac707eb10dea3678f0f0f73a05d4532ad7c5347ee53cd6828b2b3666b9
name: slf4j
arch: src
version: 1.7.4
epoch: 0
release: 3.el7
summary: Simple Logging Facade for Java
url: http://www.slf4j.org/
rpm_license: MIT and ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/slf4j-1.7.4-3.el7.src.rpm
checksum_type: sha256
description:
  The Simple Logging Facade for Java or (SLF4J) is intended to serve
  as a simple facade for various logging APIs allowing to the end-user
  to plug in the desired implementation at deployment time. SLF4J also
  allows for a gradual migration path away from
  Jakarta Commons Logging (JCL).

  Logging API implementations can either choose to implement the
  SLF4J interfaces directly, e.g. NLOG4J or SimpleLogger. Alternatively,
  it is possible (and rather easy) to write SLF4J adapters for the given
  API implementation, e.g. Log4jLoggerAdapter or JDK14LoggerAdapter..


pkgId: 123e35317870834a872ecc21d61ed70da5508b1c9a0eac62fd01dae1580add6b
name: smartmontools
arch: src
version: 6.2
epoch: 1
release: 7.el7
summary: Tools for monitoring SMART capable hard disks
url: http://smartmontools.sourceforge.net/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/smartmontools-6.2-7.el7.src.rpm
checksum_type: sha256
description:
  The smartmontools package contains two utility programs (smartctl
  and smartd) to control and monitor storage systems using the Self-
  Monitoring, Analysis and Reporting Technology System (SMART) built
  into most modern ATA and SCSI hard disks. In many cases, these
  utilities will provide advanced warning of disk degradation and
  failure.


pkgId: 560751618a936c2bdd8894124292dc4f1966244450f63de497531e10efb30257
name: snakeyaml
arch: src
version: 1.11
epoch: 0
release: 8.el7
summary: YAML parser and emitter for the Java programming language
url: http://code.google.com/p/snakeyaml
rpm_license: ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/snakeyaml-1.11-8.el7.src.rpm
checksum_type: sha256
description:
  SnakeYAML features:
      * a complete YAML 1.1 parser. In particular,
        SnakeYAML can parse all examples from the specification.
      * Unicode support including UTF-8/UTF-16 input/output.
      * high-level API for serializing and deserializing
        native Java objects.
      * support for all types from the YAML types repository.
      * relatively sensible error messages.


pkgId: 6b1f705c3fee30bfa13173ea8e38b92d5d42630c30b9bbb33cff3f25208f4ec0
name: snappy
arch: src
version: 1.1.0
epoch: 0
release: 3.el7
summary: Fast compression and decompression library
url: http://code.google.com/p/snappy/
rpm_license: BSD
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/snappy-1.1.0-3.el7.src.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger.


pkgId: 58063e97c6d9cf65d709c398a2ab92f1a14d2324f19ff50bfd9c6673c16167f3
name: socat
arch: src
version: 1.7.2.2
epoch: 0
release: 5.el7
summary: Bidirectional data relay between two data channels ('netcat++')
url: http://www.dest-unreach.org/socat
rpm_license: GPLv2
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/socat-1.7.2.2-5.el7.src.rpm
checksum_type: sha256
description:
  Socat is a relay for bidirectional data transfer between two independent data
  channels. Each of these data channels may be a file, pipe, device (serial line
  etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an
  SSL socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU
  line editor (readline), a program, or a combination of two of these.


pkgId: f3151dc8d501b2b867a1d8cca9552ad4c87eeaa4b871f89a70d3155938f301e4
name: softhsm
arch: src
version: 2.1.0
epoch: 0
release: 2.el7
summary: Software version of a PKCS#11 Hardware Security Module
url: http://www.opendnssec.org/
rpm_license: BSD
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/softhsm-2.1.0-2.el7.src.rpm
checksum_type: sha256
description:
  NOTE: This package is only suported for use with Identity Management.

  OpenDNSSEC is providing a software implementation of a generic
  cryptographic device with a PKCS#11 interface, the SoftHSM. SoftHSM is
  designed to meet the requirements of OpenDNSSEC, but can also work together
  with other cryptographic products because of the PKCS#11 interface.


pkgId: c65b51b5b31abd25eb58623a9a9517b0817bdd709609cc3696e8bdff3a9d675a
name: sos
arch: src
version: 3.3
epoch: 0
release: 4.el7
summary: A set of tools to gather troubleshooting information from a system
url: http://github.com/sosreport/sos
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sos-3.3-4.el7.src.rpm
checksum_type: sha256
description:
  Sos is a set of tools that gathers information about system
  hardware and configuration. The information can then be used for
  diagnostic purposes and debugging. Sos is commonly used to help
  support technicians and developers.


pkgId: 44e979136355cf6935d4d8a002f8c8a35f1f48a9f6d4f8bd5db07516b00fa232
name: sound-theme-freedesktop
arch: src
version: 0.8
epoch: 0
release: 3.el7
summary: freedesktop.org sound theme
url: http://www.freedesktop.org/wiki/Specifications/sound-theme-spec
rpm_license: GPLv2+ and LGPLv2+ and CC-BY-SA and CC-BY
rpm_group: User Interface/Desktops
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sound-theme-freedesktop-0.8-3.el7.src.rpm
checksum_type: sha256
description:
  The default freedesktop.org sound theme following the XDG theming
  specification.  (http://0pointer.de/public/sound-theme-spec.html).


pkgId: 7f67b507c2c66b4fc0ac0232b16d0fd048fa9fbd367dad8a567a79d8ce68449e
name: soundtouch
arch: src
version: 1.4.0
epoch: 0
release: 9.el7
summary: Audio Processing library for changing Tempo, Pitch and Playback Rates
url: http://www.surina.net/soundtouch/
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/soundtouch-1.4.0-9.el7.src.rpm
checksum_type: sha256
description:
  SoundTouch is a LGPL-licensed open-source audio processing library for
  changing the Tempo, Pitch and Playback Rates of audio streams or
  files. The SoundTouch library is suited for application developers
  writing sound processing tools that require tempo/pitch control
  functionality, or just for playing around with the sound effects.

  The SoundTouch library source kit includes an example utility
  SoundStretch which allows processing .wav audio files from a
  command-line interface.


pkgId: 94eb1029a533d74e57c46c298924a0a420bedd9213afd3694bbbc7deb9dbab38
name: source-highlight
arch: src
version: 3.1.6
epoch: 0
release: 6.el7
summary: Produces a document with syntax highlighting
url: http://www.gnu.org/software/src-highlite/
rpm_license: GPLv3+
rpm_group: Development/Tools
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/source-highlight-3.1.6-6.el7.src.rpm
checksum_type: sha256
description:
  This program, given a source file, produces a document with syntax
  highlighting. At the moment this package can handle :
  Java, Javascript, C/C++, Prolog, Perl, Php3, Python, Flex, ChangeLog, Ruby,
  Lua, Caml, Sml and Log as source languages, and HTML, XHTML and ANSI color
  escape sequences as output format.


pkgId: b0e7e91abeca43450fda16bae2d634ab01c58d21843936b11ef2aad7eebe1b35
name: sox
arch: src
version: 14.4.1
epoch: 0
release: 6.el7
summary: A general purpose sound file conversion tool
url: http://sox.sourceforge.net/
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sox-14.4.1-6.el7.src.rpm
checksum_type: sha256
description:
  SoX (Sound eXchange) is a sound file format converter SoX can convert
  between many different digitized sound formats and perform simple
  sound manipulation functions, including sound effects.


pkgId: f03851c34c042c8f8d74fddc30c4e761c9dd1324fa5198b3289aaf10313f1b5c
name: spamassassin
arch: src
version: 3.4.0
epoch: 0
release: 2.el7
summary: Spam filter for email which can be invoked from mail delivery agents
url: http://spamassassin.apache.org/
rpm_license: ASL 2.0
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/spamassassin-3.4.0-2.el7.src.rpm
checksum_type: sha256
description:
  SpamAssassin provides you with a way to reduce if not completely eliminate
  Unsolicited Commercial Email (SPAM) from your incoming email.  It can
  be invoked by a MDA such as sendmail or postfix, or can be called from
  a procmail script, .forward file, etc.  It uses a genetic-algorithm
  evolved scoring system to identify messages which look spammy, then
  adds headers to the message so they can be filtered by the user's mail
  reading software.  This distribution includes the spamd/spamc components
  which create a server that considerably speeds processing of mail.

  To enable spamassassin, if you are receiving mail locally, simply add
  this line to your ~/.procmailrc:
  INCLUDERC=/etc/mail/spamassassin/spamassassin-default.rc

  To filter spam for all users, add that line to /etc/procmailrc
  (creating if necessary).


pkgId: 2e2b83b39c18773b8ff6a4ef0a541820d427cf52f59cd5612263fd0595c0ed9d
name: speech-dispatcher
arch: src
version: 0.7.1
epoch: 0
release: 15.el7
summary: To provide a high-level device independent layer for speech synthesis
url: http://www.freebsoft.org/speechd
rpm_license: GPLv2+ and GPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/speech-dispatcher-0.7.1-15.el7.src.rpm
checksum_type: sha256
description:
  * Common interface to different TTS engines
  * Handling concurrent synthesis requests – requests may come
    asynchronously from multiple sources within an application
    and/or from more different applications.
  * Subsequent serialization, resolution of conflicts and
    priorities of incoming requests
  * Context switching – state is maintained for each client
    connection independently, event for connections from
    within one application.
  * High-level client interfaces for popular programming languages
  * Common sound output handling – audio playback is handled by
    Speech Dispatcher rather than the TTS engine, since most engines
    have limited sound output capabilities.


pkgId: 28e19af8a23bc7ab7d47c83f2a450c0c10c2e9e674a09cb8da86fa598ba25a69
name: speex
arch: src
version: 1.2
epoch: 0
release: 0.19.rc1.el7
summary: A voice compression format (codec)
url: http://www.speex.org/
rpm_license: BSD
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/speex-1.2-0.19.rc1.el7.src.rpm
checksum_type: sha256
description:
  Speex is a patent-free compression format designed especially for
  speech. It is specialized for voice communications at low bit-rates in
  the 2-45 kbps range. Possible applications include Voice over IP
  (VoIP), Internet audio streaming, audio books, and archiving of speech
  data (e.g. voice mail).


pkgId: de2906a7e7cc340209e634d8444f692cd7b618dd1ae741590092a6d05c8dacca
name: spice
arch: src
version: 0.12.4
epoch: 0
release: 19.el7
summary: Implements the SPICE protocol
url: http://www.spice-space.org/
rpm_license: LGPLv2+
rpm_group: User Interface/Desktops
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/spice-0.12.4-19.el7.src.rpm
checksum_type: sha256
description:
  The Simple Protocol for Independent Computing Environments (SPICE) is
  a remote display system built for virtual environments which allows
  you to view a computing 'desktop' environment not only on the machine
  where it is running, but from anywhere on the Internet and from a wide
  variety of machine architectures.


pkgId: b2471d90a066d651b00d28a9ef62980d3b26c44ddb04b90cf7f3dde08383c36d
name: spice-vdagent
arch: src
version: 0.14.0
epoch: 0
release: 14.el7
summary: Agent for Spice guests
url: http://spice-space.org/
rpm_license: GPLv3+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/spice-vdagent-0.14.0-14.el7.src.rpm
checksum_type: sha256
description:
  Spice agent for Linux guests offering the following features:

  Features:
  * Client mouse mode (no need to grab mouse by client, no mouse lag)
    this is handled by the daemon by feeding mouse events into the kernel
    via uinput. This will only work if the active X-session is running a
    spice-vdagent process so that its resolution can be determined.
  * Automatic adjustment of the X-session resolution to the client resolution
  * Support of copy and paste (text and images) between the active X-session
    and the client


pkgId: abe3c8eea5b619deae5e30d56857f59a55f8d4cb50bbf283b56c8f65697ab8c7
name: springdale-indexhtml
arch: src
version: 7
epoch: 0
release: 8.sdl7.3
summary: Browser default start page for Springdale Linux
rpm_license: Distributable
rpm_group: Documentation
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/springdale-indexhtml-7-8.sdl7.3.src.rpm
checksum_type: sha256
description:
  The indexhtml package contains the welcome page shown by your Web browser,
  which you'll see after you've successfully installed Springdale.


pkgId: 5891b0100d6d05bbaaec667ed68896f8b9057da4d36144981a3c44fa490bc7b3
name: springdale-logos
arch: src
version: 70.0.5
epoch: 0
release: 2.sdl7
summary: Springdale-related icons and pictures
url: http://springdale.princeton.edu
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/springdale-logos-70.0.5-2.sdl7.src.rpm
checksum_type: sha256
description:
  The springdale-logos package (the "Package") contains files created by
  Springdale Linux to replace the Red Hat "Shadow Man" logo and  RPM logo.
  The Red Hat "Shadow Man" logo, RPM, and the RPM logo are trademarks or
  registered trademarks of Red Hat, Inc.


pkgId: 532a5a36f23ca9fd4c7053729fb38609e5ad39f56f00fb14910329b0d36d9bf2
name: sqlite
arch: src
version: 3.7.17
epoch: 0
release: 8.el7
summary: Library that implements an embeddable SQL database engine
url: http://www.sqlite.org/
rpm_license: Public Domain
rpm_group: Applications/Databases
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sqlite-3.7.17-8.el7.src.rpm
checksum_type: sha256
description:
  SQLite is a C library that implements an SQL database engine. A large
  subset of SQL92 is supported. A complete database is stored in a
  single disk file. The API is designed for convenience and ease of use.
  Applications that link against SQLite can enjoy the power and
  flexibility of an SQL database without the administrative hassles of
  supporting a separate database server.  Version 2 and version 3 binaries
  are named to permit each to be installed on a single host


pkgId: 7aa1b06f93d5986e8e4762cd918b4185701de4c86f4fe838c0ac9430804b468d
name: squashfs-tools
arch: src
version: 4.3
epoch: 0
release: 0.21.gitaae0aff4.el7
summary: Utility for the creation of squashfs filesystems
url: http://squashfs.sourceforge.net/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/squashfs-tools-4.3-0.21.gitaae0aff4.el7.src.rpm
checksum_type: sha256
description:
  Squashfs is a highly compressed read-only filesystem for Linux.  This package
  contains the utilities for manipulating squashfs filesystems.


pkgId: 4f5047e187265611413cee63218d4f6200e5a2ac262e7c9d81f462a1da4a2feb
name: squid
arch: src
version: 3.5.20
epoch: 7
release: 2.el7
summary: The Squid proxy caching server
url: http://www.squid-cache.org
rpm_license: GPLv2+ and (LGPLv2+ and MIT and BSD and Public Domain)
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/squid-3.5.20-2.el7.src.rpm
checksum_type: sha256
description:
  Squid is a high-performance proxy caching server for Web clients,
  supporting FTP, gopher, and HTTP data objects. Unlike traditional
  caching software, Squid handles all requests in a single,
  non-blocking, I/O-driven process. Squid keeps meta data and especially
  hot objects cached in RAM, caches DNS lookups, supports non-blocking
  DNS lookups, and implements negative caching of failed requests.

  Squid consists of a main server program squid, a Domain Name System
  lookup program (dnsserver), a program for retrieving FTP data
  (ftpget), and some management and client tools.


pkgId: d4c09e3cb1c600ddb647f16ee6d7453240907fc80febc77571877af758b414bc
name: srptools
arch: src
version: 1.0.3
epoch: 0
release: 1.el7
summary: Tools for using the InfiniBand SRP protocol devices
url: https://www.openfabrics.org/
rpm_license: GPLv2 or BSD
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/srptools-1.0.3-1.el7.src.rpm
checksum_type: sha256
description:
  In conjunction with the kernel ib_srp driver, srptools allows you to
  discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand.


pkgId: f3c69f1a39a409d8830be82d143cb9227ec2673758f0e407d37d2541b610c175
name: sssd
arch: src
version: 1.14.0
epoch: 0
release: 43.el7
summary: System Security Services Daemon
url: http://fedorahosted.org/sssd/
rpm_license: GPLv3+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sssd-1.14.0-43.el7.src.rpm
checksum_type: sha256
description:
  Provides a set of daemons to manage access to remote directories and
  authentication mechanisms. It provides an NSS and PAM interface toward
  the system and a pluggable backend system to connect to multiple different
  account sources. It is also the basis to provide client auditing and policy
  services for projects like FreeIPA.

  The sssd subpackage is a meta-package that contains the deamon as well as all
  the existing back ends.


pkgId: 5904bcc661d98e8f906c9e23897db273d4ca1a5ffa49c6b04d236a749267bfe5
name: star
arch: src
version: 1.5.2
epoch: 0
release: 13.el7
summary: An archiving tool with ACL support
url: http://cdrecord.berlios.de/old/private/star.html
rpm_license: CDDL
rpm_group: Applications/Archiving
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/star-1.5.2-13.el7.src.rpm
checksum_type: sha256
description:
  Star saves many files together into a single tape or disk archive,
  and can restore individual files from the archive. Star supports ACL.


pkgId: f2b9a8de6c406c58ba642937e5b6eceb5e039cd09f227dc57e70e6e3ff13ab2c
name: startup-notification
arch: src
version: 0.12
epoch: 0
release: 8.el7
summary: Library for tracking application startup
url: http://www.freedesktop.org/software/startup-notification/
rpm_license: LGPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/startup-notification-0.12-8.el7.src.rpm
checksum_type: sha256
description:
  This package contains libstartup-notification which implements a
  startup notification protocol. Using this protocol a desktop
  environment can track the launch of an application and provide
  feedback such as a busy cursor, among other features.


pkgId: 2d46cacbc2f7ddc0d8f2ca75d2795a474e98ccd6fe248ce34565ad07f1470423
name: stax-ex
arch: src
version: 1.7.1
epoch: 0
release: 6.el7
summary: StAX API extensions
url: https://stax-ex.dev.java.net
rpm_license: CDDL or GPLv2
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/stax-ex-1.7.1-6.el7.src.rpm
checksum_type: sha256
description:
  This project develops a few extensions to complement JSR-173 StAX API in the
  following area.

  * Enable parser instance reuse (which is important in the
    high-performance environment like JAXB and JAX-WS)
  * Improve the support for reading from non-text XML infoset,
    such as FastInfoset.
  * Improve the namespace support.


pkgId: c4ec7a04f1b475af8db03b1dc6a62895021488ee371ae2319bd33968a730e01a
name: stax2-api
arch: src
version: 3.1.1
epoch: 0
release: 10.el7
summary: Experimental API extending basic StAX implementation
url: http://docs.codehaus.org/display/WSTX/StAX2
rpm_license: BSD
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/stax2-api-3.1.1-10.el7.src.rpm
checksum_type: sha256
description:
  StAX2 is an experimental API that is intended to extend
  basic StAX specifications in a way that allows implementations
  to experiment with features before they end up in the actual
  StAX specification (if they do). As such, it is intended
  to be freely implementable by all StAX implementations same way
  as StAX, but without going through a formal JCP process.


pkgId: 9e19e54302f9312e0ef0641e27833be90ab7f089304940ad5bbea82dc63c608b
name: stix-fonts
arch: src
version: 1.1.0
epoch: 0
release: 5.el7
summary: Scientific and engineering fonts
url: http://www.stixfonts.org/
rpm_license: OFL
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/stix-fonts-1.1.0-5.el7.src.rpm
checksum_type: sha256
description:
  The mission of the Scientific and Technical Information Exchange (STIX) font
  creation project is the preparation of a comprehensive set of fonts that serve
  the scientific and engineering community in the process from manuscript
  creation through final publication, both in electronic and print formats.

  This package includes base Unicode fonts containing most glyphs for standard
  use in the usual four styles.

  %_font_pkg -f 61-stix.conf STIX-*otf
  %doc License/*.pdf *.pdf


pkgId: 120b32a04f16b770480389ff0d9c32a5fe79310ea0abef5a75af39aeb064d71c
name: strace
arch: src
version: 4.8
epoch: 0
release: 11.el7
summary: Tracks and displays system calls associated with a running process
url: http://sourceforge.net/projects/strace/
rpm_license: BSD
rpm_group: Development/Debuggers
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/strace-4.8-11.el7.src.rpm
checksum_type: sha256
description:
  The strace program intercepts and records the system calls called and
  received by a running process.  Strace can print a record of each
  system call, its arguments and its return value.  Strace is useful for
  diagnosing problems and debugging, as well as for instructional
  purposes.

  Install strace if you need a tool to track the system calls made and
  received by a process.


pkgId: 7dd3c824f83d33b997b99c8e11af98cde4b36f49690f660e53aacb7d272da957
name: strigi
arch: src
version: 0.7.7
epoch: 0
release: 12.20120626.el7
summary: A desktop search program
url: http://www.vandenoever.info/software/strigi/
rpm_license: LGPLv2+
rpm_group: Applications/Productivity
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/strigi-0.7.7-12.20120626.el7.src.rpm
checksum_type: sha256
description:
  Strigi is a fast and light desktop search engine. It can handle a large range
  of file formats such as emails, office documents, media files, and file
  archives. It can index files that are embedded in other files. This means email
  attachments and files in zip files are searchable as if they were normal files
  on your harddisk.

  Strigi is normally run as a background daemon that can be accessed by many
  other programs at once. In addition to the daemon, Strigi comes with powerful
  replacements for the popular unix commands 'find' and 'grep'. These are called
  'deepfind' and 'deepgrep' and can search inside files just like the strigi
  daemon can.


pkgId: bcf46120dc7149ee6638ab5146ca8f3885aad27c3a05c427c9948d7f9660bb53
name: strongimcv
arch: src
version: 5.2.0
epoch: 0
release: 3.el7
summary: Trusted Network Connect (TNC) Architecture
url: http://www.strongswan.org/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/strongimcv-5.2.0-3.el7.src.rpm
checksum_type: sha256
description:
  This package provides Trusted Network Connect's (TNC) architecture support.
  It includes support for TNC client and server (IF-TNCCS), IMC and IMV message
  exchange (IF-M), interface between IMC/IMV and TNC client/server (IF-IMC
  and IF-IMV). It also includes PTS based IMC/IMV for TPM based remote
  attestation, SWID IMC/IMV, and OS IMC/IMV. It's IMC/IMV dynamic libraries
  modules can be used by any third party TNC Client/Server implementation
  possessing a standard IF-IMC/IMV interface. In addition, it implements
  PT-TLS to support TNC over TLS.

  This package has disabled it's IKE features as those are not supported.


pkgId: be43b8af97af16f13f0c407213b5c5091ca6351ecda6dd64a9f1e7cad370bc00
name: stunnel
arch: src
version: 4.56
epoch: 0
release: 6.el7
summary: An SSL-encrypting socket wrapper
url: http://www.stunnel.org/
rpm_license: GPLv2
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/stunnel-4.56-6.el7.src.rpm
checksum_type: sha256
description:
  Stunnel is a socket wrapper which can provide SSL (Secure Sockets
  Layer) support to ordinary applications. For example, it can be used
  in conjunction with imapd to create an SSL secure IMAP server.


pkgId: 35119763e07c0d826686bb6e0bae851805946252b0e7ea30aaceedc0de83b688
name: subversion
arch: src
version: 1.7.14
epoch: 0
release: 10.el7
summary: A Modern Concurrent Version Control System
url: http://subversion.apache.org/
rpm_license: ASL 2.0
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/subversion-1.7.14-10.el7.src.rpm
checksum_type: sha256
description:
  Subversion is a concurrent version control system which enables one
  or more users to collaborate in developing and maintaining a
  hierarchy of files and directories while keeping a history of all
  changes.  Subversion only stores the differences between versions,
  instead of every complete file.  Subversion is intended to be a
  compelling replacement for CVS.


pkgId: dc744f8feb628ec3ad060704b5c63465a9aab7cd8333862aca8a33ad5b9f0259
name: sudo
arch: src
version: 1.8.6p7
epoch: 0
release: 20.el7
summary: Allows restricted root access for specified users
url: http://www.courtesan.com/sudo/
rpm_license: ISC
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sudo-1.8.6p7-20.el7.src.rpm
checksum_type: sha256
description:
  Sudo (superuser do) allows a system administrator to give certain
  users (or groups of users) the ability to run some (or all) commands
  as root while logging all commands and arguments. Sudo operates on a
  per-command basis.  It is not a replacement for the shell.  Features
  include: the ability to restrict what commands a user may run on a
  per-host basis, copious logging of each command (providing a clear
  audit trail of who did what), a configurable timeout of the sudo
  command, and the ability to use the same configuration file (sudoers)
  on many different machines.


pkgId: 17e95d2228b7e226c11bd3bf8056114be9e7d865538b8ede4fb5f556801dda72
name: suitesparse
arch: src
version: 4.0.2
epoch: 0
release: 10.el7
summary: A collection of sparse matrix libraries
url: http://www.cise.ufl.edu/research/sparse/SuiteSparse
rpm_license: LGPLv2+ and GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/suitesparse-4.0.2-10.el7.src.rpm
checksum_type: sha256
description:
  suitesparse is a collection of libraries for computations involving sparse
  matrices.  The package includes the following libraries:
    AMD                 approximate minimum degree ordering
    BTF                 permutation to block triangular form (beta)
    CAMD                constrained approximate minimum degree ordering
    COLAMD              column approximate minimum degree ordering
    CCOLAMD             constrained column approximate minimum degree ordering
    CHOLMOD             sparse Cholesky factorization
    CSparse             a concise sparse matrix package
    CXSparse            CSparse extended: complex matrix, int and long int support
    KLU                 sparse LU factorization, primarily for circuit simulation
    LDL                 a simple LDL factorization
    SQPR                a multithread, multifrontal, rank-revealing sparse QR
                        factorization method
    UMFPACK             sparse LU factorization
    SuiteSparse_config  configuration file for all the above packages.
    RBio                read/write files in Rutherford/Boeing format


pkgId: 60074f042cf6e29dab206c8cf45fd3b49b153db44f3ff64349a1498ed58f0924
name: supermin
arch: src
version: 5.1.16
epoch: 0
release: 4.el7
summary: Tool for creating supermin appliances
url: http://people.redhat.com/~rjones/supermin/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/supermin-5.1.16-4.el7.src.rpm
checksum_type: sha256
description:
  Supermin is a tool for building supermin appliances.  These are tiny
  appliances (similar to virtual machines), usually around 100KB in
  size, which get fully instantiated on-the-fly in a fraction of a
  second when you need to boot one of them.

  This package contains supermin version 4.


pkgId: 684ba35322c8c05fbfabaa9bc982d671aca8ac4149a5ea86cc843f58d27cf0e0
name: svrcore
arch: src
version: 4.1.2
epoch: 0
release: 1.el7
summary: Secure PIN handling using NSS crypto
url: https://pagure.io/svrcore
rpm_license: MPL2.0
rpm_group: Development/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/svrcore-4.1.2-1.el7.src.rpm
checksum_type: sha256
description:
  svrcore provides applications with several ways to handle secure PIN storage
  e.g. in an application that must be restarted, but needs the PIN to unlock
  the private key and other crypto material, without user intervention.  svrcore
  uses the facilities provided by NSS.


pkgId: c2bb3ab62db9b9894b83d2973ba9079292355a3016a75a38e19b672b3b010e88
name: swig
arch: src
version: 2.0.10
epoch: 0
release: 5.el7
summary: Connects C/C++/Objective C to some high-level programming languages
url: http://swig.sourceforge.net/
rpm_license: GPLv3+ and BSD
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/swig-2.0.10-5.el7.src.rpm
checksum_type: sha256
description:
  Simplified Wrapper and Interface Generator (SWIG) is a software
  development tool for connecting C, C++ and Objective C programs with a
  variety of high-level programming languages.  SWIG is primarily used
  with Perl, Python and Tcl/TK, but it has also been extended to Java,
  Eiffel and Guile. SWIG is normally used to create high-level
  interpreted programming environments, systems integration, and as a
  tool for building user interfaces


pkgId: 62c2b7bb1b8122e1014948df16e1d7c3dc5e6a9eb845ffbcaede8863c8e2862e
name: symlinks
arch: src
version: 1.4
epoch: 0
release: 9.el7
summary: A utility which maintains a system's symbolic links
url: ftp://metalab.unc.edu/pub/Linux/utils/file/
rpm_license: Copyright only
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/symlinks-1.4-9.el7.src.rpm
checksum_type: sha256
description:
  The symlinks utility performs maintenance on symbolic links.  Symlinks
  checks for symlink problems, including dangling symlinks which point
  to nonexistent files.  Symlinks can also automatically convert
  absolute symlinks to relative symlinks.

  Install the symlinks package if you need a program for maintaining
  symlinks on your system.


pkgId: 9d3d47f1119b80177a060cda241ee03cc9acda9edb78023c63976b163b2d997c
name: syslinux
arch: src
version: 4.05
epoch: 0
release: 13.el7
summary: Simple kernel loader which boots from a FAT filesystem
url: http://syslinux.zytor.com/wiki/index.php/The_Syslinux_Project
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/syslinux-4.05-13.el7.src.rpm
checksum_type: sha256
description:
  SYSLINUX is a suite of bootloaders, currently supporting DOS FAT
  filesystems, Linux ext2/ext3 filesystems (EXTLINUX), PXE network boots
  (PXELINUX), or ISO 9660 CD-ROMs (ISOLINUX).


pkgId: dfc2c43fa9d05e7041b7f2141c1d7f0c7fd6a14c2009c1f19045b05901387320
name: sysstat
arch: src
version: 10.1.5
epoch: 0
release: 11.el7
summary: Collection of performance monitoring tools for Linux
url: http://sebastien.godard.pagesperso-orange.fr/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/sysstat-10.1.5-11.el7.src.rpm
checksum_type: sha256
description:
  The sysstat package contains sar, sadf, mpstat, iostat, pidstat, nfsiostat-sysstat,
  tapestat, cifsiostat and sa tools for Linux.
  The sar command collects and reports system activity information. This
  information can be saved in a file in a binary format for future inspection. The
  statistics reported by sar concern I/O transfer rates, paging activity,
  process-related activities, interrupts, network activity, memory and swap space
  utilization, CPU utilization, kernel activities and TTY statistics, among
  others. Both UP and SMP machines are fully supported.
  The sadf command may be used to display data collected by sar in various formats
  (CSV, XML, etc.).
  The iostat command reports CPU utilization and I/O statistics for disks.
  The tapestat command reports statistics for tapes connected to the system.
  The mpstat command reports global and per-processor statistics.
  The pidstat command reports statistics for Linux tasks (processes).
  The nfsiostat-sysstat command reports I/O statistics for network file systems.
  The cifsiostat command reports I/O statistics for CIFS file systems.


pkgId: fccee3623aacb6eb854c4382bcd48e472778bfd76938bf29fa29990c9fd2f784
name: system-config-date
arch: src
version: 1.10.6
epoch: 0
release: 2.el7
summary: A graphical interface for modifying system date and time
url: http://fedorahosted.org/system-config-date
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/system-config-date-1.10.6-2.el7.src.rpm
checksum_type: sha256
description:
  system-config-date is a graphical interface for changing the system date and
  time, configuring the system time zone, and setting up the NTP daemon to
  synchronize the time of the system with an NTP time server.


pkgId: 6f60bb37b9de12ec7580001fcc489b15656482df6407246b7b23c74ba715a66a
name: system-config-date-docs
arch: src
version: 1.0.11
epoch: 0
release: 4.el7
summary: Documentation for setting the system date and time
url: https://fedorahosted.org/system-config-date-docs
rpm_license: GPLv2+
rpm_group: Documentation
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/system-config-date-docs-1.0.11-4.el7.src.rpm
checksum_type: sha256
description:
  This package contains the online documentation for system-config-date, with
  which you can configure date, time and the use of timeservers on your system.


pkgId: ab05dbd18cc4cc2a9d90a2c2c5a5206e985c2420dcc631d76d0882b10b00d34c
name: system-config-keyboard
arch: src
version: 1.4.0
epoch: 0
release: 4.el7
summary: A graphical interface for modifying the keyboard
url: https://fedorahosted.org/system-config-keyboard/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/system-config-keyboard-1.4.0-4.el7.src.rpm
checksum_type: sha256
description:
  system-config-keyboard is a graphical user interface that allows
  the user to change the default keyboard of the system.


pkgId: 4dd46ff11b73e82b957932ab26e673b522a7f1d310656767019d7ef49d701de4
name: system-config-language
arch: src
version: 1.4.0
epoch: 0
release: 7.el7
summary: A graphical interface for modifying the system language
url: https://fedorahosted.org/system-config-language/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/system-config-language-1.4.0-7.el7.src.rpm
checksum_type: sha256
description:
  system-config-language is a graphical user interface that
  allows the user to change the default language of the system.


pkgId: cb494b62454f50c4cfe24afdcb02323b09b4d209233d064330a88eeabf6a9271
name: system-config-printer
arch: src
version: 1.4.1
epoch: 0
release: 19.el7
summary: A printer administration tool
url: http://cyberelk.net/tim/software/system-config-printer/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/system-config-printer-1.4.1-19.el7.src.rpm
checksum_type: sha256
description:
  system-config-printer is a graphical user interface that allows
  the user to configure a CUPS print server.


pkgId: 22bd86d377a3a30137cf7fbe07448f621b7e3c806c2056c070391b65520c8400
name: system-config-users
arch: src
version: 1.3.5
epoch: 0
release: 2.el7
summary: A graphical interface for administering users and groups
url: http://fedorahosted.org/system-config-users
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/system-config-users-1.3.5-2.el7.src.rpm
checksum_type: sha256
description:
  system-config-users is a graphical utility for administrating
  users and groups.  It depends on the libuser library.


pkgId: 8fa60182ca3f21dbf3c2a9b3e15a352059c8cfe61db1d4f532d6f250144e8074
name: system-config-users-docs
arch: src
version: 1.0.9
epoch: 0
release: 6.el7
summary: Documentation for administering users and groups
url: https://fedorahosted.org/system-config-users-docs
rpm_license: GPLv2+
rpm_group: Documentation
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/system-config-users-docs-1.0.9-6.el7.src.rpm
checksum_type: sha256
description:
  This package contains the online documentation for system-config-users which is
  a graphical utility for administrating users and groups.


pkgId: f07d6bc08dd0faf35ae415e1e8b4de7ca28182b2d7f03e0ff8bfb9233be2830b
name: system-storage-manager
arch: src
version: 0.4
epoch: 0
release: 7.el7
summary: A single tool to manage your storage
url: http://storagemanager.sf.net
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/system-storage-manager-0.4-7.el7.src.rpm
checksum_type: sha256
description:
  System Storage Manager provides an easy to use command line interface to manage
  your storage using various technologies like lvm, btrfs, encrypted volumes and
  more.

  In more sophisticated enterprise storage environments, management with Device
  Mapper (dm), Logical Volume Manager (LVM), or Multiple Devices (md) is becoming
  increasingly more difficult.  With file systems added to the mix, the number of
  tools needed to configure and manage storage has grown so large that it is
  simply not user friendly.  With so many options for a system administrator to
  consider, the opportunity for errors and problems is large.

  The btrfs administration tools have shown us that storage management can be
  simplified, and we are working to bring that ease of use to Linux file systems
  in general.

  You should install the ssm if you need to manage your storage with various
  technologies via a single unified interface.


pkgId: 341ea9f941cc445620c7bcce93c8f2c97d1acaeebfafa6885685578e9c3abc31
name: system-switch-java
arch: src
version: 1.1.7.1
epoch: 0
release: 0.el7
summary: A tool for changing the default Java toolset
url: https://fedorahosted.org/system-switch-java
rpm_license: GPLv2+ and BSD
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/system-switch-java-1.1.7.1-0.el7.src.rpm
checksum_type: sha256
description:
  The system-switch-java package provides an easy-to-use tool to select
  the default Java toolset for the system.


pkgId: 41ab1ab2ce02a2c481c891957891e81a5ef91eae31274dcf66e941b65b3686dc
name: systemd
arch: src
version: 219
epoch: 0
release: 30.el7_3.3
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPLv2+ and MIT and GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/systemd-219-30.el7_3.3.src.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 83692e77178078a04379b191fa9d28b0d5c78cc8dc979f9b7a3da4f73b27410e
name: systemtap
arch: src
version: 3.0
epoch: 0
release: 7.el7
summary: Programmable system-wide instrumentation system
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_group: Development/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/systemtap-3.0-7.el7.src.rpm
checksum_type: sha256
description:
  SystemTap is an instrumentation system for systems running Linux.
  Developers can write instrumentation scripts to collect data on
  the operation of the system.  The base systemtap package contains/requires
  the components needed to locally develop and execute systemtap scripts.


pkgId: f911a92879fa5f00c61132a1d5abf7140a7a62c1198663ed61bb56f5054f1b38
name: sysvinit
arch: src
version: 2.88
epoch: 0
release: 14.dsf.el7
summary: Programs which control basic system processes
url: http://savannah.nongnu.org/projects/sysvinit/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/sysvinit-2.88-14.dsf.el7.src.rpm
checksum_type: sha256
description:
  The sysvinit package contains a group of processes that control
  the very basic functions of your system. sysvinit includes the init
  program, the first program started by the Linux kernel when the
  system boots. Init then controls the startup, running, and shutdown
  of all other programs.


pkgId: c9f6479e61c4c4bf79743ab9d070e51b4b7b486f982da336adcf376df340f19a
name: t1lib
arch: src
version: 5.1.2
epoch: 0
release: 14.el7
summary: PostScript Type 1 font rasterizer
url: ftp://sunsite.unc.edu/pub/Linux/libs/graphics/t1lib-5.1.2.lsm
rpm_license: LGPLv2+
rpm_group: Applications/Publishing
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/t1lib-5.1.2-14.el7.src.rpm
checksum_type: sha256
description:
  T1lib is a rasterizer library for Adobe Type 1 Fonts. It supports
  rotation and transformation, kerning underlining and antialiasing. It
  does not depend on X11, but does provides some special functions for
  X11.

  AFM-files can be generated from Type 1 font files and font subsetting
  is possible.


pkgId: 4621cf402ccf45fb82b122b43bd1394c32944f1bf46f2aa5c861c16a9d9ee78f
name: t1utils
arch: src
version: 1.37
epoch: 0
release: 6.el7
summary: Collection of Type 1 and 2 font manipulation utilities
url: http://www.lcdf.org/~eddietwo/type/
rpm_license: MIT
rpm_group: Applications/Publishing
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/t1utils-1.37-6.el7.src.rpm
checksum_type: sha256
description:
  t1utils is a collection of programs for manipulating PostScript type 1
  and type 2 fonts containing programs to convert between PFA (ASCII)
  format, PFB (binary) format, a human-readable and editable ASCII
  format, and Macintosh resource forks.


pkgId: 615a283f06979d99f27094754191f762eb052a92cc5ee7e04e61522b741e40db
name: taglib
arch: src
version: 1.8
epoch: 0
release: 7.20130218git.el7
summary: Audio Meta-Data Library
url: http://taglib.github.com/
rpm_license: LGPLv2
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/taglib-1.8-7.20130218git.el7.src.rpm
checksum_type: sha256
description:
  TagLib is a library for reading and editing the meta-data of several
  popular audio formats. Currently it supports both ID3v1 and ID3v2 for MP3
  files, Ogg Vorbis comments and ID3 tags and Vorbis comments in FLAC, MPC,
  Speex, WavPack, TrueAudio files, as well as APE Tags.


pkgId: 674a1ed471007aabe66ab36a18a0c413ba868828aa79b990306380e3ccf681ac
name: tagsoup
arch: src
version: 1.2.1
epoch: 0
release: 8.el7
summary: A SAX-compliant HTML parser written in Java
url: http://home.ccil.org/~cowan/XML/tagsoup/
rpm_license: ASL 2.0 and (GPLv2+ or AFL)
rpm_group: Text Processing/Markup/XML
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tagsoup-1.2.1-8.el7.src.rpm
checksum_type: sha256
description:
  TagSoup is a SAX-compliant parser written in Java that, instead of
  parsing well-formed or valid XML, parses HTML as it is found in the wild: nasty
  and brutish, though quite often far from short. TagSoup is designed for people
  who have to process this stuff using some semblance of a rational application
  design. By providing a SAX interface, it allows standard XML tools to be
  applied to even the worst HTML.


pkgId: bc75eabd3ce5d118790651130c43ea7109f7d4d0e8e5d5c385ed00d65e32107d
name: talk
arch: src
version: 0.17
epoch: 0
release: 46.el7
summary: Talk client for one-on-one Internet chatting
rpm_license: BSD
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/talk-0.17-46.el7.src.rpm
checksum_type: sha256
description:
  The talk package provides client programs for the Internet talk
  protocol, which allows you to chat with other users on different
  systems.  Talk is a communication program which copies lines from one
  terminal to the terminal of another user.

  Install talk if you'd like to use talk for chatting with users on
  different systems.

url:
  http://web.archive.org/web/20070817165301/http://www.hcs.harvard.edu/~dholland/computers/netkit.html


pkgId: c8ef412638f420e94b3eb204ced958811dbe0c12c5f1cccfb920bc751a28e627
name: tar
arch: src
version: 1.26
epoch: 2
release: 31.el7
summary: A GNU file archiving program
url: http://www.gnu.org/software/tar/
rpm_license: GPLv3+
rpm_group: Applications/Archiving
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tar-1.26-31.el7.src.rpm
checksum_type: sha256
description:
  The GNU tar program saves many files together in one archive and can
  restore individual files (or all of the files) from that archive. Tar
  can also be used to add supplemental files to an archive and to update
  or list files in the archive. Tar includes multivolume support,
  automatic archive compression/decompression, the ability to perform
  remote archives, and the ability to perform incremental and full
  backups.

  If you want to use tar for remote backups, you also need to install
  the rmt package on the remote box.


pkgId: de5c4d5dee4db28f38978e42af3e1f8e1062605d039aaf5a4a8e510146312781
name: targetcli
arch: src
version: 2.1.fb41
epoch: 0
release: 3.el7
summary: An administration shell for storage targets
url: https://fedorahosted.org/targetcli-fb/
rpm_license: ASL 2.0
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/targetcli-2.1.fb41-3.el7.src.rpm
checksum_type: sha256
description:
  An administration shell for configuring iSCSI, FCoE, and other
  SCSI targets, using the TCM/LIO kernel target subsystem. FCoE
  users will also need to install and use fcoe-utils.


pkgId: a18732e8e7adf2b4ea8899e3fc39e8e44389075728d1e0595a8d19dac35dac07
name: targetd
arch: src
version: 0.7.1
epoch: 0
release: 1.el7
summary: Service to make storage remotely configurable
url: https://fedorahosted.org/targetd/
rpm_license: GPLv3
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/targetd-0.7.1-1.el7.src.rpm
checksum_type: sha256
description:
  targetd turns the machine into a remotely-configurable storage appliance.
  It supports an HTTP/jsonrpc-2.0 interface to let a remote
  administrator allocate volumes from an LVM volume group, and export
  those volumes over iSCSI.


pkgId: 61b482b5e8fec28568c56ee906a85b674eb55f05a471b6483958858200851c54
name: tbb
arch: src
version: 4.1
epoch: 0
release: 9.20130314.el7
summary: The Threading Building Blocks library abstracts low-level threading details
url: http://threadingbuildingblocks.org/
rpm_license: GPLv2 with exceptions
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tbb-4.1-9.20130314.el7.src.rpm
checksum_type: sha256
description:
  Threading Building Blocks (TBB) is a C++ runtime library that
  abstracts the low-level threading details necessary for optimal
  multi-core performance.  It uses common C++ templates and coding style
  to eliminate tedious threading implementation work.

  TBB requires fewer lines of code to achieve parallelism than other
  threading models.  The applications you write are portable across
  platforms.  Since the library is also inherently scalable, no code
  maintenance is required as more processor cores become available.


pkgId: dd68e2ce62022f4c312434913bdcd9b49ea33b6a565fcbdb858af75e61f25f95
name: tboot
arch: src
version: 1.9.4
epoch: 1
release: 2.el7
summary: Performs a verified launch using Intel TXT
url: http://sourceforge.net/projects/tboot/
rpm_license: BSD
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tboot-1.9.4-2.el7.src.rpm
checksum_type: sha256
description:
  Trusted Boot (tboot) is an open source, pre-kernel/VMM module that uses
  Intel Trusted Execution Technology (Intel TXT) to perform a measured
  and verified launch of an OS kernel/VMM.


pkgId: 08197d08ba08ceae63988416d60755b411f5a372373655e4c685410f81a503bd
name: tcl
arch: src
version: 8.5.13
epoch: 1
release: 8.el7
summary: Tool Command Language, pronounced tickle
url: http://tcl.sourceforge.net/
rpm_license: TCL
rpm_group: Development/Languages
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tcl-8.5.13-8.el7.src.rpm
checksum_type: sha256
description:
  The Tcl (Tool Command Language) provides a powerful platform for
  creating integration applications that tie together diverse
  applications, protocols, devices, and frameworks. When paired with the
  Tk toolkit, Tcl provides a fastest and powerful way to create
  cross-platform GUI applications.  Tcl can also be used for a variety
  of web-related tasks and for creating powerful command languages for
  applications.


pkgId: 8896dd22ec3cbfea08dbebe48f995bf4de4fbe59c5e8ddbfba71632ff368b738
name: tcl-pgtcl
arch: src
version: 2.0.0
epoch: 0
release: 5.el7
summary: A Tcl client library for PostgreSQL
url: http://sourceforge.net/projects/pgtclng/
rpm_license: PostgreSQL
rpm_group: Applications/Databases
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tcl-pgtcl-2.0.0-5.el7.src.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system.
  The tcl-pgtcl package contains Pgtcl, a Tcl client library for connecting
  to a PostgreSQL server.


pkgId: 6b259b67a2422a3d7f72a5d00b69828ab87083bf123fb358cfefb8cd5f0fb48e
name: tclx
arch: src
version: 8.4.0
epoch: 0
release: 22.el7
summary: Extensions for Tcl and Tk
url: http://tclx.sourceforge.net/
rpm_license: BSD
rpm_group: Development/Languages
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tclx-8.4.0-22.el7.src.rpm
checksum_type: sha256
description:
  Extended Tcl (TclX) is a set of extensions to the Tcl programming language.
  Extended Tcl is oriented towards system programming tasks and large
  application development. TclX provides additional interfaces to the
  operating system, and adds many new programming constructs, text manipulation
  and debugging tools.


pkgId: 54af5a86d866c904fd4fcdf8d8e4316acc95f8cca21e86e0c58f05fee3f80a0b
name: tcp_wrappers
arch: src
version: 7.6
epoch: 0
release: 77.el7
summary: A security tool which acts as a wrapper for TCP daemons
url: ftp://ftp.porcupine.org/pub/security/index.html
rpm_license: BSD
rpm_group: System Environment/Daemons
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tcp_wrappers-7.6-77.el7.src.rpm
checksum_type: sha256
description:
  The tcp_wrappers package provides small daemon programs which can
  monitor and filter incoming requests for systat, finger, FTP, telnet,
  rlogin, rsh, exec, tftp, talk and other network services.

  Install the tcp_wrappers program if you need a security tool for
  filtering incoming network services requests.

  This version also supports IPv6.


pkgId: 3a560c977e94c96c31bd4d9d29efccbb4f8dcf12de07eba28ed69eb3f3a96eb8
name: tcpdump
arch: src
version: 4.5.1
epoch: 14
release: 3.el7
summary: A network traffic monitoring tool
url: http://www.tcpdump.org
rpm_license: BSD with advertising
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tcpdump-4.5.1-3.el7.src.rpm
checksum_type: sha256
description:
  Tcpdump is a command-line tool for monitoring network traffic.
  Tcpdump can capture and display the packet headers on a particular
  network interface or on all interfaces.  Tcpdump can display all of
  the packet headers, or just the ones that match particular criteria.

  Install tcpdump if you need a program to monitor network traffic.


pkgId: 6beb5ee9416645f1cbb2383a6d0cd9ae2f50c62c23b1bda3ab902ac40b826d1e
name: tcsh
arch: src
version: 6.18.01
epoch: 0
release: 13.el7
summary: An enhanced version of csh, the C shell
url: http://www.tcsh.org/
rpm_license: BSD
rpm_group: System Environment/Shells
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tcsh-6.18.01-13.el7.src.rpm
checksum_type: sha256
description:
  Tcsh is an enhanced but completely compatible version of csh, the C
  shell.  Tcsh is a command language interpreter which can be used both
  as an interactive login shell and as a shell script command processor.
  Tcsh includes a command line editor, programmable word completion,
  spelling correction, a history mechanism, job control and a C language
  like syntax.


pkgId: 6f16348bd20c60231fd9e0becc59102cee91f2455f3340e31874fb8e69f09205
name: teckit
arch: src
version: 2.5.1
epoch: 0
release: 11.el7
summary: Conversion library and mapping compiler
url: http://scripts.sil.org/teckit
rpm_license: LGPLv2+ or CPL
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/teckit-2.5.1-11.el7.src.rpm
checksum_type: sha256
description:
  TECkit is a low-level toolkit intended to be used by other
  applications that need to perform encoding conversions (e.g., when
  importing legacy data into a Unicode-based application). The
  primary component of the TECkit package is therefore a library that
  performs conversions; this is the "TECkit engine". The engine
  relies on mapping tables in a specific binary format (for which
  documentation is available); there is a compiler that creates such
  tables from a human-readable mapping description (a simple text file).


pkgId: 7a55b0d96a32996e14008e6376f12163d37dd068de60c3b464e725df88842054
name: telepathy-filesystem
arch: src
version: 0.0.2
epoch: 0
release: 6.el7
summary: Telepathy filesystem layout
rpm_license: Public Domain
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/telepathy-filesystem-0.0.2-6.el7.src.rpm
checksum_type: sha256
description:
  This package provides some directories which are required by other
  packages which comprise the Telepathy release.


pkgId: 23ae6f208f6cb4b8ced6585c617f02dacd6d9ed1375cf63289039d0a6019af7d
name: telepathy-glib
arch: src
version: 0.24.0
epoch: 0
release: 1.el7
summary: GLib bindings for Telepathy
url: http://telepathy.freedesktop.org/wiki/FrontPage
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/telepathy-glib-0.24.0-1.el7.src.rpm
checksum_type: sha256
description:
  Telepathy-glib is the glib bindings for the telepathy unified framework
  for all forms of real time conversations, including instant messaging, IRC,
  voice calls and video calls.


pkgId: 719a95569eb8e54a5a611306dae56d450726838a7424ebeeb8d82895fc259aad
name: telepathy-haze
arch: src
version: 0.8.0
epoch: 0
release: 1.el7
summary: A multi-protocol Libpurple connection manager for Telepathy
url: http://developer.pidgin.im/wiki/Telepathy
rpm_license: GPLv2+
rpm_group: Applications/Communications
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/telepathy-haze-0.8.0-1.el7.src.rpm
checksum_type: sha256
description:
  telepathy-haze is a connection manager built around libpurple, the core of
  Pidgin (formerly Gaim), as a Summer of Code project under the Pidgin umbrella.
  Ultimately, any protocol supported by libpurple will be supported by
  telepathy-haze; for now, XMPP, MSN and AIM are known to work acceptably, and
  others will probably work too.


pkgId: 2d9edd55fc5cd84b61567cf27da5bfb4a06e764c2c8f27b54c02273b6dba07c1
name: telepathy-logger
arch: src
version: 0.8.0
epoch: 0
release: 5.el7
summary: Telepathy framework logging daemon
url: http://telepathy.freedesktop.org/wiki/Logger
rpm_license: LGPLv2+
rpm_group: Applications/Communications
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/telepathy-logger-0.8.0-5.el7.src.rpm
checksum_type: sha256
description:
  telepathy-logger is a headless Observer client that logs information
  received by the Telepathy framework. It features pluggable
  backends to log different sorts of messages, in different formats.


pkgId: 19c75338b1e5f6350bec03d426d2b67e8421e3fa4e25ca5422fa8f9e7ba0414c
name: telepathy-mission-control
arch: src
version: 5.16.3
epoch: 1
release: 3.el7
summary: Central control for Telepathy connection manager
url: http://telepathy.freedesktop.org/wiki/Mission_Control
rpm_license: LGPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/telepathy-mission-control-5.16.3-3.el7.src.rpm
checksum_type: sha256
description:
  Mission Control, or MC, is a Telepathy component providing a way for
  "end-user" applications to abstract some of the details of connection
  managers, to provide a simple way to manipulate a bunch of connection
  managers at once, and to remove the need to have in each program the
  account definitions and credentials.


pkgId: a8645d7c3d999d44b11290e2ccf9c6f29ea9dc83f9367cdad545eed943f44453
name: telepathy-salut
arch: src
version: 0.8.1
epoch: 0
release: 6.el7
summary: Link-local XMPP telepathy connection manager
url: http://telepathy.freedesktop.org/wiki/FrontPage
rpm_license: LGPLv2+
rpm_group: Applications/Communications
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/telepathy-salut-0.8.1-6.el7.src.rpm
checksum_type: sha256
description:
  telepathy-salut is a Telepathy connection manager for link-local XMPP.
  Normally, XMPP does not support direct client-to-client interactions,
  since it requires authentication with a server.  This package makes
  it is possible to establish an XMPP-like communications system on a
  local network using zero-configuration networking.


pkgId: 8f086bb35207bbf150ea98d4ee5544d45f76dd280fdec5d0bc4054f03bdead33
name: telnet
arch: src
version: 0.17
epoch: 1
release: 60.el7
summary: The client program for the Telnet remote login protocol
url: http://web.archive.org/web/20070819111735/www.hcs.harvard.edu/~dholland/computers/old-netkit.html
rpm_license: BSD
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/telnet-0.17-60.el7.src.rpm
checksum_type: sha256
description:
  Telnet is a popular protocol for logging into remote systems over the
  Internet. The package provides a command line Telnet client


pkgId: 1aeefc50d8d367b1ff5ed04c6a6bcf2f6eb0ea4aa71b105729b42469272d3c11
name: testng
arch: src
version: 6.8.7
epoch: 0
release: 3.el7
summary: Java-based testing framework
url: http://testng.org/
rpm_license: ASL 2.0 and CPL
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/testng-6.8.7-3.el7.src.rpm
checksum_type: sha256
description:
  TestNG is a testing framework inspired from JUnit and NUnit but introducing
  some new functionality, including flexible test configuration, and
  distributed test running.  It is designed to cover unit tests as well as
  functional, end-to-end, integration, etc.


pkgId: 1bc8ac8ea7737623821fe41ca7cf013895f2b9afc850fffb18241283328d67a6
name: texi2html
arch: src
version: 1.82
epoch: 0
release: 10.el7
summary: A highly customizable texinfo to HTML and other formats translator
url: http://www.nongnu.org/texi2html/
rpm_license: GPLv2+ and OFSFDL and (CC-BY-SA or GPLv2)
rpm_group: Applications/Text
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/texi2html-1.82-10.el7.src.rpm
checksum_type: sha256
description:
  The basic purpose of texi2html is to convert Texinfo documents into HTML,
  and other formats.  Configuration files written in perl provide fine degree
  of control over the final output, allowing most every aspect of the final
  output not specified in the Texinfo input file to be specified.


pkgId: 51649b44567cc1897cd4a0aa8135638c38adc3f1a881a7a9f082bf871844f475
name: texinfo
arch: src
version: 5.1
epoch: 0
release: 4.el7
summary: Tools needed to create Texinfo format documentation files
url: http://www.gnu.org/software/texinfo/
rpm_license: GPLv3+
rpm_group: Applications/Publishing
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/texinfo-5.1-4.el7.src.rpm
checksum_type: sha256
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  Install texinfo if you want a documentation system for producing both
  online and print documentation from the same source file and/or if you
  are going to write documentation for the GNU Project.


pkgId: 51fc74ed633b92ad431d3134c994f9070dbaf09df38a1a933373758d401d0f7e
name: texlive
arch: src
version: 2012
epoch: 2
release: 38.20130427_r30134.el7
summary: TeX formatting system
url: http://tug.org/texlive/
rpm_license: Artistic 2.0 and GPLv2 and GPLv2+ and LGPLv2+ and LPPL and MIT and Public Domain and UCD and Utopia
rpm_group: Applications/Publishing
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/texlive-2012-38.20130427_r30134.el7.src.rpm
checksum_type: sha256
description:
  The TeX Live software distribution offers a complete TeX system for a
  variety of Unix, Macintosh, Windows and other platforms. It
  encompasses programs for editing, typesetting, previewing and printing
  of TeX documents in many different languages, and a large collection
  of TeX macros and font libraries.

  The distribution includes extensive general documentation about TeX,
  as well as the documentation for the included software packages.


pkgId: 55cf757a5fff21b9786468b822bfe5e0f5e4bd6e152e674fb0609fcf089b0cfe
name: tftp
arch: src
version: 5.2
epoch: 0
release: 13.el7
summary: The client for the Trivial File Transfer Protocol (TFTP)
url: http://www.kernel.org/pub/software/network/tftp/
rpm_license: BSD
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tftp-5.2-13.el7.src.rpm
checksum_type: sha256
description:
  The Trivial File Transfer Protocol (TFTP) is normally used only for
  booting diskless workstations.  The tftp package provides the user
  interface for TFTP, which allows users to transfer files to and from a
  remote machine.  This program and TFTP provide very little security,
  and should not be enabled unless it is expressly needed.


pkgId: 29366de06245591236aed617b32bcc8191850f22ca799e8e4ce2534ee8e3f637
name: thai-scalable-fonts
arch: src
version: 0.5.0
epoch: 0
release: 7.el7
summary: Thai TrueType fonts
url: http://linux.thai.net/projects/thaifonts-scalable
rpm_license: GPLv2+ and Bitstream Vera
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/thai-scalable-fonts-0.5.0-7.el7.src.rpm
checksum_type: sha256
description:
  fonts-tlwg provides a collection of free scalable Thai fonts.

  Thai scalable fonts included here are:
  - Kinnari, Garuda and Norasi from the National Font project
  - DB Thai Text from DearBook
  - TlwgMono, PseudoMono, Purisa by TLWG


pkgId: 9d90db7ec19fee91653a8f6a4a6258622cadb8a3feb9a6ea817fad38878e3898
name: tibetan-machine-uni-fonts
arch: src
version: 1.901
epoch: 0
release: 12.el7
summary: Tibetan Machine Uni font for Tibetan, Dzongkha and Ladakhi
rpm_license: GPLv3+ with exceptions
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tibetan-machine-uni-fonts-1.901-12.el7.src.rpm
checksum_type: sha256
description:
  Tibetan Machine Uni is an TrueType OpenType, Unicode font released by THDL
  project. The font supports Tibetan, Dzongkha and Ladakhi in dbu-can script
  with full support for the Sanskrit combinations found in chos skad text.

url:
  http://www.thlib.org/tools/#wiki=/access/wiki/site/26a34146-33a6-48ce-001e-f16ce7908a6a/tibetan%20machine%20uni.html


pkgId: 98669eb4168e681d58579ca5fe9dc4e2b31d9ca4798334808da959169a89d179
name: tigervnc
arch: src
version: 1.3.1
epoch: 0
release: 9.el7
summary: A TigerVNC remote display system
url: http://www.tigervnc.com
rpm_license: GPLv2+
rpm_group: User Interface/Desktops
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tigervnc-1.3.1-9.el7.src.rpm
checksum_type: sha256
description:
  Virtual Network Computing (VNC) is a remote display system which
  allows you to view a computing 'desktop' environment not only on the
  machine where it is running, but from anywhere on the Internet and
  from a wide variety of machine architectures.  This package contains a
  client which will allow you to connect to other desktops running a VNC
  server.


pkgId: 4c1af069563b6c937058ecf22ed2aa835ce9a60c4e1a0a930d5f0c06206b7fe1
name: time
arch: src
version: 1.7
epoch: 0
release: 45.el7
summary: A GNU utility for monitoring a program's use of system resources
url: http://www.gnu.org/software/time/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/time-1.7-45.el7.src.rpm
checksum_type: sha256
description:
  The GNU time utility runs another program, collects information about
  the resources used by that program while it is running, and displays
  the results.


pkgId: ae2fc9d647b85d0defbd0f55890722ff5a6282b54e6ca8d6f81a8dadc623cf14
name: tix
arch: src
version: 8.4.3
epoch: 1
release: 12.el7
summary: A set of extension widgets for Tk
url: http://tix.sourceforge.net/
rpm_license: BSD
rpm_group: Development/Languages
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tix-8.4.3-12.el7.src.rpm
checksum_type: sha256
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.


pkgId: 2ab698a0ed3ec6ef1ec7b75589976745b5124cd3dc0b6c773dfadaf21ff0f594
name: tk
arch: src
version: 8.5.13
epoch: 1
release: 6.el7
summary: The graphical toolkit for the Tcl scripting language
url: http://tcl.sourceforge.net
rpm_license: TCL
rpm_group: Development/Languages
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tk-8.5.13-6.el7.src.rpm
checksum_type: sha256
description:
  When paired with the Tcl scripting language, Tk provides a fast and powerful
  way to create cross-platform GUI applications.


pkgId: d972a793413f4fdf749ea0363fdc2bdff2a6a43a757d80e8b422b476bfdd8b66
name: tmpwatch
arch: src
version: 2.11
epoch: 0
release: 5.el7
summary: A utility for removing files based on when they were last accessed
url: https://fedorahosted.org/tmpwatch/
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tmpwatch-2.11-5.el7.src.rpm
checksum_type: sha256
description:
  The tmpwatch utility recursively searches through specified
  directories and removes files which have not been accessed in a
  specified period of time.  Tmpwatch is normally used to clean up
  directories which are used for temporarily holding files (for example,
  /tmp).  Tmpwatch ignores symlinks, won't switch filesystems and only
  removes empty directories and regular files.


pkgId: 47a87190ef3a116265a8f76df8d79742a4612487e0331d2847a158644494b1a1
name: tmux
arch: src
version: 1.8
epoch: 0
release: 4.el7
summary: A terminal multiplexer
url: http://sourceforge.net/projects/tmux
rpm_license: ISC and BSD
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tmux-1.8-4.el7.src.rpm
checksum_type: sha256
description:
  tmux is a "terminal multiplexer."  It enables a number of terminals (or
  windows) to be accessed and controlled from a single terminal.  tmux is
  intended to be a simple, modern, BSD-licensed alternative to programs such
  as GNU Screen.


pkgId: d8b16a98c37e38716e7b74b4cc9f02aa61c6ec98aa94c27852f1e8a294de2e6b
name: tn5250
arch: src
version: 0.17.4
epoch: 0
release: 10.el7
summary: 5250 Telnet protocol and Terminal
url: http://tn5250.sourceforge.net/
rpm_license: LGPLv2+
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tn5250-0.17.4-10.el7.src.rpm
checksum_type: sha256
description:
  tn5250 is an implementation of the 5250 Telnet protocol.
  It provides the 5250 library and a 5250 terminal emulation.


pkgId: e234daf0c799b081e1af65802eb64f6b0268cc628c2fbff7c5059cc600606822
name: tncfhh
arch: src
version: 0.8.3
epoch: 0
release: 16.el7
summary: An open source implementation of the Trusted Network Connect (TNC) framework
url: http://trust.inform.fh-hannover.de/joomla/index.php/projects/tncfhh
rpm_license: GPLv2
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tncfhh-0.8.3-16.el7.src.rpm
checksum_type: sha256
description:
  The TNC@FHH project is an open source implementation of the Trusted Network
  Connect (TNC) framework, which is specified by the Trusted Computing Group
  (TCG). TNC@FHH allows you to provision access to a network based upon
  factors like the user credentials and the requesting endpoint's integrity state.

  The following TNC components and their respective interfaces are implemented by
  TNC@FHH: IMCs (IF-IMC 1.2), IMVs (IF-IMV 1.2), TNCS (IF-TNCCS 1.1),
  NAA (IF-T EAP 1.1).


pkgId: efde38d471fa44289be39a602ff9ab6b3f5edfe48b059fca26187def8878bd23
name: tog-pegasus
arch: src
version: 2.14.1
epoch: 2
release: 3.el7
summary: OpenPegasus WBEM Services for Linux
url: http://www.openpegasus.org
rpm_license: MIT
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tog-pegasus-2.14.1-3.el7.src.rpm
checksum_type: sha256
description:
  OpenPegasus WBEM Services for Linux enables management solutions that deliver
  increased control of enterprise resources. WBEM is a platform and resource
  independent DMTF standard that defines a common information model and
  communication protocol for monitoring and controlling resources from diverse
  sources.


pkgId: 287fcbc3b08e825e87fbd10dad4547bc2e501990c713893f3a14b1095f3b1636
name: tokyocabinet
arch: src
version: 1.4.48
epoch: 0
release: 3.el7
summary: A modern implementation of a DBM
url: http://fallabs.com/tokyocabinet/
rpm_license: LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tokyocabinet-1.4.48-3.el7.src.rpm
checksum_type: sha256
description:
  Tokyo Cabinet is a library of routines for managing a database. It is the
  successor of QDBM. Tokyo Cabinet runs very fast. For example, the time required
  to store 1 million records is 1.5 seconds for a hash database and 2.2 seconds
  for a B+ tree database. Moreover, the database size is very small and can be up
  to 8EB. Furthermore, the scalability of Tokyo Cabinet is great.


pkgId: 66a042db7a533a51fe2fbd3dcacb03718883e158d3b57bbaac32fcd34b04f51e
name: tomcat
arch: src
version: 7.0.69
epoch: 0
release: 10.el7
summary: Apache Servlet/JSP Engine, RI for Servlet 3.0/JSP 2.2 API
url: http://tomcat.apache.org/
rpm_license: ASL 2.0
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tomcat-7.0.69-10.el7.src.rpm
checksum_type: sha256
description:
  Tomcat is the servlet container that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License version 2.0. Tomcat is intended
  to be a collaboration of the best-of-breed developers from around the world.


pkgId: 6932463badfeb78260a9d2845a32dbbd4c96d01f55b8b7a93e53895ea92413ba
name: tomcatjss
arch: src
version: 7.1.2
epoch: 0
release: 3.el7
summary: JSSE implementation using JSS for Tomcat
url: http://pki.fedoraproject.org/
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tomcatjss-7.1.2-3.el7.src.rpm
checksum_type: sha256
description:
  A Java Secure Socket Extension (JSSE) implementation
  using Java Security Services (JSS) for Tomcat 7.

  NOTE:  The 'tomcatjss' package conflicts with the 'tomcat-native' package
         because it uses an underlying NSS security model rather than the
         OpenSSL security model, so these two packages may not co-exist.


pkgId: 7114a9140d7cc32a5023cc7eff1ce0f22070bdcfd444af598b6acea37f0b3deb
name: totem
arch: src
version: 3.14.3
epoch: 1
release: 6.el7
summary: Movie player for GNOME
url: http://projects.gnome.org/totem/
rpm_license: GPLv2+ with exceptions
rpm_group: Applications/Multimedia
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/totem-3.14.3-6.el7.src.rpm
checksum_type: sha256
description:
  Totem is simple movie player for the GNOME desktop. It features a
  simple playlist, a full-screen mode, seek and volume controls, as well as
  a pretty complete keyboard navigation.

  Totem is extensible through a plugin system.


pkgId: 7b80ed8327e0d57a57a588d950517e64476bf7ccb85048c1bca1be1a177919a9
name: tpm-quote-tools
arch: src
version: 1.0.2
epoch: 0
release: 3.el7
summary: TPM-based attestation using the TPM quote operation (tools)
url: http://sf.net/projects/tpmquotetools
rpm_license: BSD
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tpm-quote-tools-1.0.2-3.el7.src.rpm
checksum_type: sha256
description:
  TPM Quote Tools is a collection of programs that provide support
  for TPM based attestation using the TPM quote operation.


pkgId: 59ab4bfc76ea54b3f6728f177d4030efcedca468513da8ea165c11e8e99d8e8e
name: tpm-tools
arch: src
version: 1.3.8
epoch: 0
release: 6.el7
summary: Management tools for the TPM hardware
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tpm-tools-1.3.8-6.el7.src.rpm
checksum_type: sha256
description:
  tpm-tools is a group of tools to manage and utilize the Trusted Computing
  Group's TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's
  software state using cryptographic hashes and more.


pkgId: 4b138cf6b4b19d424a5296a2680e7d438ee60a0ae9432d25f9381de6536a573e
name: trace-cmd
arch: src
version: 2.6.0
epoch: 0
release: 3.el7
summary: A user interface to Ftrace
url: http://www.kernel.org/pub/linux/analysis/trace-cmd/
rpm_license: GPLv2 and LGPLv2+
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/trace-cmd-2.6.0-3.el7.src.rpm
checksum_type: sha256
description:
  The trace-cmd utility is a user interface to Ftrace.
  Instead of needing to use the debugfs directly, trace-cmd will handle of
  setting of options and tracers and will record into a data file.


pkgId: 015a7c00d6407629c32d00ea6040e85f785ea8da6933119905f05b62fa2e7f43
name: traceroute
arch: src
version: 2.0.22
epoch: 3
release: 2.el7
summary: Traces the route taken by packets over an IPv4/IPv6 network
url: http://traceroute.sourceforge.net
rpm_license: GPLv2+
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/traceroute-2.0.22-2.el7.src.rpm
checksum_type: sha256
description:
  The traceroute utility displays the route used by IP packets on their
  way to a specified network (or Internet) host.  Traceroute displays
  the IP number and host name (if possible) of the machines along the
  route taken by the packets.  Traceroute is used as a network debugging
  tool.  If you're having network connectivity problems, traceroute will
  show you where the trouble is coming from along the route.

  Install traceroute if you need a tool for diagnosing network connectivity
  problems.


pkgId: 250236b03e7921ab446b8f202be14f2389852b0a0e8e891f2b2b6b630c42bfec
name: tracker
arch: src
version: 1.2.7
epoch: 0
release: 2.el7
summary: Desktop-neutral search tool and indexer
url: https://wiki.gnome.org/Projects/Tracker
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tracker-1.2.7-2.el7.src.rpm
checksum_type: sha256
description:
  Tracker is a powerful desktop-neutral first class object database,
  tag/metadata database, search tool and indexer.

  It consists of a common object database that allows entities to have an
  almost infinite number of properties, metadata (both embedded/harvested as
  well as user definable), a comprehensive database of keywords/tags and
  links to other entities.

  It provides additional features for file based objects including context
  linking and audit trails for a file object.

  It has the ability to index, store, harvest metadata. retrieve and search
  all types of files and other first class objects


pkgId: 85d1a4df650fd47ae442c7ef44c0dbeb67d35058036591766549ce902d9ee77a
name: transfig
arch: src
version: 3.2.5d
epoch: 1
release: 13.el7
summary: Utility for converting FIG files (made by xfig) to other formats
url: http://www.xfig.org/
rpm_license: MIT
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/transfig-3.2.5d-13.el7.src.rpm
checksum_type: sha256
description:
  The transfig utility creates a makefile which translates FIG (created
  by xfig) or PIC figures into a specified LaTeX graphics language (for
  example, PostScript(TM)).  Transfig is used to create TeX documents
  which are portable (i.e., they can be printed in a wide variety of
  environments).

  Install transfig if you need a utility for translating FIG or PIC
  figures into certain graphics languages.


pkgId: 77a95078529aeee24f64b587f57993b145c46518cbf16056b47504964131830e
name: tree
arch: src
version: 1.6.0
epoch: 0
release: 10.el7
summary: File system tree viewer
url: http://mama.indstate.edu/users/ice/tree/
rpm_license: GPLv2+
rpm_group: Applications/File
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/tree-1.6.0-10.el7.src.rpm
checksum_type: sha256
description:
  The tree utility recursively displays the contents of directories in a
  tree-like format.  Tree is basically a UNIX port of the DOS tree
  utility.


pkgId: 3312f911823c11989035449e432c21d0264caa11c4909a87034ae4fcf5db8131
name: trousers
arch: src
version: 0.3.13
epoch: 0
release: 1.el7
summary: TCG's Software Stack v1.2
url: http://trousers.sourceforge.net
rpm_license: BSD
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/trousers-0.3.13-1.el7.src.rpm
checksum_type: sha256
description:
  TrouSerS is an implementation of the Trusted Computing Group's Software Stack
  (TSS) specification. You can use TrouSerS to write applications that make use
  of your TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's software
  state using cryptographic hashes and more.


pkgId: 0ff20bc971f93c6c7918aff8f056d61269991c64d17901ba3d908504d38a4f0a
name: ttembed
arch: src
version: 1.1
epoch: 0
release: 3.el7
summary: Remove embedding limitations from TrueType fonts
url: https://github.com/hisdeedsaredust/ttembed
rpm_license: Public Domain
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/ttembed-1.1-3.el7.src.rpm
checksum_type: sha256
description:
  Remove embedding limitations from TrueType fonts, by setting the fsType field
  in the OS/2 table to zero. That's it; this program is a one-trick pony.


pkgId: 209272fc9764fcde6569ab9de837ce62766a3c51c237ef0570aa1ceb04fa8103
name: ttmkfdir
arch: src
version: 3.0.9
epoch: 0
release: 42.el7
summary: Utility to create fonts.scale files for truetype fonts
rpm_license: LGPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/ttmkfdir-3.0.9-42.el7.src.rpm
checksum_type: sha256
description:
  ttmkfdir is a utility used to create fonts.scale files in
  TrueType font directories in order to prepare them for use
  by the font server.


pkgId: b24c94417b6a325a01e5ba5c25ce2b5ab5a35bbbf1db49868f89e39a50ba6ef2
name: tuna
arch: src
version: 0.13
epoch: 0
release: 5.el7
summary: Application tuning GUI & command line utility
url: https://git.kernel.org/pub/scm/utils/tuna/tuna.git
rpm_license: GPLv2
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tuna-0.13-5.el7.src.rpm
checksum_type: sha256
description:
  Provides interface for changing scheduler and IRQ tunables, at whole CPU and at
  per thread/IRQ level. Allows isolating CPUs for use by a specific application
  and moving threads and interrupts to a CPU by just dragging and dropping them.
  Operations can be done on CPU sockets, understanding CPU topology.

  Can be used as a command line utility without requiring the GUI libraries to be
  installed.


pkgId: ae140b57508fcfe1fd449aaac4724c19c76ede83948a7cfde68898af3eed109a
name: tuned
arch: src
version: 2.7.1
epoch: 0
release: 3.el7
summary: A dynamic adaptive system tuning daemon
url: https://fedorahosted.org/tuned/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/tuned-2.7.1-3.el7.src.rpm
checksum_type: sha256
description:
  The tuned package contains a daemon that tunes system settings dynamically.
  It does so by monitoring the usage of several system components periodically.
  Based on that information components will then be put into lower or higher
  power saving modes to adapt to the current usage. Currently only ethernet
  network and ATA harddisk devices are implemented.


pkgId: 129eb5bf0f3a2f01df7e327410e3231c075085744d0309fe4f515223a0281f0c
name: udisks2
arch: src
version: 2.1.2
epoch: 0
release: 6.el7
summary: Disk Manager
url: http://www.freedesktop.org/wiki/Software/udisks
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/udisks2-2.1.2-6.el7.src.rpm
checksum_type: sha256
description:
  udisks provides a daemon, D-Bus API and command line tools for
  managing disks and storage devices. This package is for the udisks 2.x
  series.


pkgId: 45ccdafbf1efbd09c1ad8c137236538ededf1c274066b4d71898a04e6a011684
name: unbound
arch: src
version: 1.4.20
epoch: 0
release: 28.el7
summary: Validating, recursive, and caching DNS(SEC) resolver
url: http://www.nlnetlabs.nl/unbound/
rpm_license: BSD
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/unbound-1.4.20-28.el7.src.rpm
checksum_type: sha256
description:
  Unbound is a validating, recursive, and caching DNS(SEC) resolver.

  The C implementation of Unbound is developed and maintained by NLnet
  Labs. It is based on ideas and algorithms taken from a java prototype
  developed by Verisign labs, Nominet, Kirei and ep.net.

  Unbound is designed as a set of modular components, so that also
  DNSSEC (secure DNS) validation and stub-resolvers (that do not run
  as a server, but are linked into an application) are easily possible.


pkgId: d6fa587941db28f0de013edeca496e086f0880b3e614170d9db7e64fae702ef5
name: unicode-ucd
arch: src
version: 6.3.0
epoch: 0
release: 2.el7
summary: Unicode Character Database
url: http://www.unicode.org/ucd/
rpm_license: MIT
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/unicode-ucd-6.3.0-2.el7.src.rpm
checksum_type: sha256
description:
  The Unicode Character Database (UCD) consists of a number of data files listing
  Unicode character properties and related data. It also includes data files
  containing test data for conformance to several important Unicode algorithms.


pkgId: eb81cb7b2cefb9c2b1383ddee215001facde880c67c4291587fc79837d686420
name: unique3
arch: src
version: 3.0.2
epoch: 0
release: 8.el7
summary: Single instance support for applications
url: http://www.gnome.org/~ebassi/source/
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/unique3-3.0.2-8.el7.src.rpm
checksum_type: sha256
description:
  Unique is a library for writing single instance applications, that is
  applications that are run once and every further call to the same binary
  either exits immediately or sends a command to the running instance.

  This version of unique works with GTK+ 3.


pkgId: f4519dc2bfcf159514ead48090df082e46080d729f9f76ea3fb508e841787343
name: units
arch: src
version: 2.01
epoch: 0
release: 5.el7
summary: A utility for converting amounts from one unit to another
url: http://www.gnu.org/software/units/units.html
rpm_license: GPLv3+
rpm_group: Applications/Engineering
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/units-2.01-5.el7.src.rpm
checksum_type: sha256
description:
  Units converts an amount from one unit to another, or tells you what
  mathematical operation you need to perform to convert from one unit to
  another. The units program can handle multiplicative scale changes as
  well as conversions such as Fahrenheit to Celsius.


pkgId: 931f681c01a1426d35dbd573179286ddc7f58a44c4095d399428dd4594511aa0
name: unixODBC
arch: src
version: 2.3.1
epoch: 0
release: 11.el7
summary: A complete ODBC driver manager for Linux
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/unixODBC-2.3.1-11.el7.src.rpm
checksum_type: sha256
description:
  Install unixODBC if you want to access databases through ODBC.
  You will also need the mysql-connector-odbc package if you want to access
  a MySQL database, and/or the postgresql-odbc package for PostgreSQL.


pkgId: dd8da71f242c17c03f0cdc3a82ae93649bd2f6dcbbb53b75779c62be10b61091
name: unoconv
arch: src
version: 0.6
epoch: 0
release: 7.el7
summary: Tool to convert between any document format supported by LibreOffice
url: http://dag.wieers.com/home-made/unoconv/
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/unoconv-0.6-7.el7.src.rpm
checksum_type: sha256
description:
  unoconv converts between any document format that LibreOffice understands.
  It uses LibreOffice's UNO bindings for non-interactive conversion of
  documents.

  Supported document formats include Open Document Format (.odf), MS Word (.doc),
  MS Office Open/MS OOXML (.xml), Portable Document Format (.pdf), HTML, XHTML,
  RTF, Docbook (.xml), and more.


pkgId: fecd5bfd23584ce2215580f2b3d8b23235fa41399d670980d2e7238bc606bd2d
name: unzip
arch: src
version: 6.0
epoch: 0
release: 16.el7
summary: A utility for unpacking zip files
url: http://www.info-zip.org/UnZip.html
rpm_license: BSD
rpm_group: Applications/Archiving
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/unzip-6.0-16.el7.src.rpm
checksum_type: sha256
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: 9e8535d81e4f46cb8d97e40a8cf17e426398d783f5cb89a2d02d8e402a314e86
name: upower
arch: src
version: 0.99.2
epoch: 0
release: 1.el7
summary: Power Management Service
url: http://upower.freedesktop.org/
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/upower-0.99.2-1.el7.src.rpm
checksum_type: sha256
description:
  UPower (formerly DeviceKit-power) provides a daemon, API and command
  line tools for managing power devices attached to the system.


pkgId: a18d7e195630ced6a58dfd6d6cdd0f215c50dfcdb481c1bab963cba06c557c84
name: uriparser
arch: src
version: 0.7.5
epoch: 0
release: 9.el7
summary: URI parsing library - RFC 3986
url: http://uriparser.sourceforge.net/
rpm_license: BSD
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/uriparser-0.7.5-9.el7.src.rpm
checksum_type: sha256
description:
  Uriparser is a strictly RFC 3986 compliant URI parsing library written
  in C. uriparser is cross-platform, fast, supports Unicode and is
  licensed under the New BSD license.


pkgId: 4ec902e6731bd2dd93fd54ce3b83bd8b0d8b294d3d642b38069941234ab5aff7
name: urlview
arch: src
version: 0.9
epoch: 0
release: 15.20121210git6cfcad.el7
summary: URL extractor/launcher
url: https://github.com/sigpipe/urlview
rpm_license: GPLv2+
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/urlview-0.9-15.20121210git6cfcad.el7.src.rpm
checksum_type: sha256
description:
  urlview is a screen oriented program for extracting URLs from text
  files and displaying a menu from which you may launch a command to
  view a specific item.


pkgId: 41bd4f960766ff7cf2359679da004f88521dd54bb3dd4c8d08ace81b2439d833
name: urw-fonts
arch: src
version: 2.4
epoch: 0
release: 16.el7
summary: Free versions of the 35 standard PostScript fonts.
url: http://svn.ghostscript.com/ghostscript/tags/urw-fonts-1.0.7pre44/
rpm_license: GPL+
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/urw-fonts-2.4-16.el7.src.rpm
checksum_type: sha256
description:
  Free, good quality versions of the 35 standard PostScript(TM) fonts,
  donated under the GPL by URW++ Design and Development GmbH.

  Install the urw-fonts package if you need free versions of standard
  PostScript fonts.


pkgId: 492d62aba6db3b6d7130c1b0f2fd8e6bfe4179c53d8470463a7bda90094cedae
name: usb_modeswitch
arch: src
version: 2.4.0
epoch: 0
release: 5.el7
summary: USB Modeswitch gets mobile broadband cards in operational mode
url: http://www.draisberghof.de/usb_modeswitch/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/usb_modeswitch-2.4.0-5.el7.src.rpm
checksum_type: sha256
description:
  USB Modeswitch brings up your datacard into operational mode. When plugged
  in they identify themselves as cdrom and present some non-Linux compatible
  installation files. This tool deactivates this cdrom-device and enables
  the real communication device. It supports most devices built and
  sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.


pkgId: 801e331fb1e383813b261941692bca53c583c6b89816d4138b07e5cbf003d80a
name: usb_modeswitch-data
arch: src
version: 20160612
epoch: 0
release: 2.el7
summary: USB Modeswitch gets mobile broadband cards in operational mode
url: http://www.draisberghof.de/usb_modeswitch/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/usb_modeswitch-data-20160612-2.el7.src.rpm
checksum_type: sha256
description:
  USB Modeswitch brings up your datacard into operational mode. When plugged
  in they identify themselves as cdrom and present some non-Linux compatible
  installation files. This tool deactivates this cdrom-devices and enables
  the real communication device. It supports most devices built and
  sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.

  This package contains the data files needed for usb_modeswitch to function.


pkgId: cd29b5da0df186614ca0232577cbdb6eb2f8f596d1165af39c3f53d1acfee893
name: usbmuxd
arch: src
version: 1.0.8
epoch: 0
release: 11.el7
summary: Daemon for communicating with Apple's iOS devices
url: http://www.libimobiledevice.org/
rpm_license: GPLv3+ or GPLv2+ and LGPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/usbmuxd-1.0.8-11.el7.src.rpm
checksum_type: sha256
description:
  usbmuxd is a daemon used for communicating with Apple's iPod Touch, iPhone,
  iPad and Apple TV devices. It allows multiple services on the device to be
  accessed simultaneously.


pkgId: 5e953211ea9ea20ae676e6ba248c6ec892f78a69c542347954f987f5c96a90ce
name: usbredir
arch: src
version: 0.7.1
epoch: 0
release: 1.el7
summary: USB network redirection protocol libraries
url: http://spice-space.org/page/UsbRedir
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/usbredir-0.7.1-1.el7.src.rpm
checksum_type: sha256
description:
  The usbredir libraries allow USB devices to be used on remote and/or virtual
  hosts over TCP.  The following libraries are provided:

  usbredirparser:
  A library containing the parser for the usbredir protocol

  usbredirhost:
  A library implementing the USB host side of a usbredir connection.
  All that an application wishing to implement a USB host needs to do is:
  * Provide a libusb device handle for the device
  * Provide write and read callbacks for the actual transport of usbredir data
  * Monitor for usbredir and libusb read/write events and call their handlers


pkgId: 84264a5ff7c8e482aea64fb215577b95cdde5cb3932c047bce10586995e13465
name: usermode
arch: src
version: 1.111
epoch: 0
release: 5.el7
summary: Tools for certain user account management tasks
url: https://fedorahosted.org/usermode/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/usermode-1.111-5.el7.src.rpm
checksum_type: sha256
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: dcbe630ea4cfc8f352675b405a89fe2f48211d72f98cb72e19b54696d059fb43
name: userspace-rcu
arch: src
version: 0.7.9
epoch: 0
release: 2.el7
summary: RCU (read-copy-update) implementation in user space
url: http://lttng.org/urcu/
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/userspace-rcu-0.7.9-2.el7.src.rpm
checksum_type: sha256
description:
  This data synchronization library provides read-side access which scales
  linearly with the number of cores. It does so by allowing multiples copies
  of a given data structure to live at the same time, and by monitoring
  the data structure accesses to detect grace periods after which memory
  reclamation is possible.


pkgId: 7daa7a69e2ae5a29c4284f9b7f8d1647a3501025afede1df2aa9da2c4be914dd
name: ustr
arch: src
version: 1.0.4
epoch: 0
release: 16.el7
summary: String library, very low memory overhead, simple to import
url: http://www.and.org/ustr/
rpm_license: MIT or LGPLv2+ or BSD
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/ustr-1.0.4-16.el7.src.rpm
checksum_type: sha256
description:
   Micro string library, very low overhead from plain strdup() (Ave. 44% for
  0-20B strings). Very easy to use in existing C code. At it's simplest you can
  just include a single header file into your .c and start using it.
   This package also distributes pre-built shared libraries.


pkgId: f229cc064907cd2439bcf5a258836f5f6bf9fd6fd1259bd68d432db2b1be812b
name: util-linux
arch: src
version: 2.23.2
epoch: 0
release: 33.el7
summary: A collection of basic system utilities
url: http://en.wikipedia.org/wiki/Util-linux
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and BSD with advertising and Public Domain
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/util-linux-2.23.2-33.el7.src.rpm
checksum_type: sha256
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, Util-linux contains the fdisk configuration tool and the login
  program.


pkgId: 3070b8da992f8ddc5968891e3015e5deb2639d87e701f96cae5496b0826ecf82
name: uuid
arch: src
version: 1.6.2
epoch: 0
release: 26.el7
summary: Universally Unique Identifier library
url: http://www.ossp.org/pkg/lib/uuid/
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/uuid-1.6.2-26.el7.src.rpm
checksum_type: sha256
description:
  OSSP uuid is a ISO-C:1999 application programming interface (API)
  and corresponding command line interface (CLI) for the generation
  of DCE 1.1, ISO/IEC 11578:1996 and RFC 4122 compliant Universally
  Unique Identifier (UUID). It supports DCE 1.1 variant UUIDs of version
  1 (time and node based), version 3 (name based, MD5), version 4
  (random number based) and version 5 (name based, SHA-1). Additional
  API bindings are provided for the languages ISO-C++:1998, Perl:5 and
  PHP:4/5. Optional backward compatibility exists for the ISO-C DCE-1.1
  and Perl Data::UUID APIs.


pkgId: da4ce634d78f6744ca26983feb80d5d8ebe91b95b23ea18c048eacfa98b2a3f3
name: v4l-utils
arch: src
version: 0.9.5
epoch: 0
release: 4.el7
summary: Utilities for video4linux and DVB devices
url: http://www.linuxtv.org/downloads/v4l-utils/
rpm_license: GPLv2+ and GPLv2
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/v4l-utils-0.9.5-4.el7.src.rpm
checksum_type: sha256
description:
  v4l-utils is a collection of various video4linux (V4L) and DVB utilities. The
  main v4l-utils package contains cx18-ctl, ir-keytable, ivtv-ctl, v4l2-ctl and
  v4l2-sysfs-path.


pkgId: 698f05287c7d32c59462b89e5b4062d4bb273fab77e475c9457e8f9e46be79a9
name: vala
arch: src
version: 0.26.1
epoch: 0
release: 3.el7
summary: A modern programming language for GNOME
url: http://live.gnome.org/Vala
rpm_license: LGPLv2+ and BSD
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vala-0.26.1-3.el7.src.rpm
checksum_type: sha256
description:
  Vala is a new programming language that aims to bring modern programming
  language features to GNOME developers without imposing any additional
  runtime requirements and without using a different ABI compared to
  applications and libraries written in C.

  valac, the Vala compiler, is a self-hosting compiler that translates
  Vala source code into C source and header files. It uses the GObject
  type system to create classes and interfaces declared in the Vala source
  code. It's also planned to generate GIDL files when gobject-
  introspection is ready.

  The syntax of Vala is similar to C#, modified to better fit the GObject
  type system.


pkgId: b26f2e869c5653c5d1430933f5a29e2c7552c75532c3f77d356ea60fb02daad7
name: valgrind
arch: src
version: 3.11.0
epoch: 1
release: 24.el7
summary: Tool for finding memory management bugs in programs
url: http://www.valgrind.org/
rpm_license: GPLv2+
rpm_group: Development/Debuggers
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/valgrind-3.11.0-24.el7.src.rpm
checksum_type: sha256
description:
  Valgrind is a tool to help you find memory-management problems in your
  programs. When a program is run under Valgrind's supervision, all
  reads and writes of memory are checked, and calls to
  malloc/new/free/delete are intercepted. As a result, Valgrind can
  detect a lot of problems that are otherwise very hard to
  find/diagnose.


pkgId: 940f9e7627465992e281187a15c1893a1feff6a1c347884d6807c8f21b130538
name: velocity
arch: src
version: 1.7
epoch: 0
release: 10.el7
summary: Java-based template engine
url: http://velocity.apache.org/
rpm_license: ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/velocity-1.7-10.el7.src.rpm
checksum_type: sha256
description:
  Velocity is a Java-based template engine. It permits anyone to use the
  simple yet powerful template language to reference objects defined in
  Java code.
  When Velocity is used for web development, Web designers can work in
  parallel with Java programmers to develop web sites according to the
  Model-View-Controller (MVC) model, meaning that web page designers can
  focus solely on creating a site that looks good, and programmers can
  focus solely on writing top-notch code. Velocity separates Java code
  from the web pages, making the web site more maintainable over the long
  run and providing a viable alternative to Java Server Pages (JSPs) or
  PHP.
  Velocity's capabilities reach well beyond the realm of web sites; for
  example, it can generate SQL and PostScript and XML (see Anakia for more
  information on XML transformations) from templates. It can be used
  either as a standalone utility for generating source code and reports,
  or as an integrated component of other systems. Velocity also provides
  template services for the Turbine web application framework.
  Velocity+Turbine provides a template service that will allow web
  applications to be developed according to a true MVC model.


pkgId: b0ad18a186681e3175333615d25642f8934d4ee933a5dd0cd88cc3eb6ef09f28
name: vhostmd
arch: src
version: 0.5
epoch: 0
release: 11.el7_0
summary: Virtualization host metrics daemon
url: http://gitorious.org/vhostmd
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vhostmd-0.5-11.el7_0.src.rpm
checksum_type: sha256
description:
  vhostmd provides a "metrics communication channel" between a host and
  its hosted virtual machines, allowing limited introspection of host
  resource usage from within virtual machines.


pkgId: 308f73cb62de3b8c001f0c44aacaf9657cdb0d0b105ccc0538f7510e0db39e27
name: vigra
arch: src
version: 1.9.0
epoch: 0
release: 11.el7
summary: Generic Programming for Computer Vision
url: http://hci.iwr.uni-heidelberg.de/vigra/
rpm_license: MIT
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/vigra-1.9.0-11.el7.src.rpm
checksum_type: sha256
description:
  VIGRA stands for "Vision with Generic Algorithms". It's a novel computer vision
  library that puts its main emphasis on customizable algorithms and data
  structures. By using template techniques similar to those in the C++ Standard
  Template Library, you can easily adapt any VIGRA component to the needs of your
  application without thereby giving up execution speed.


pkgId: 60082cb9837bf33a49bec47fb5d3b13db53348dd8f0b73b1d7d4ba20c82d7f0e
name: vim
arch: src
version: 7.4.160
epoch: 2
release: 1.el7
summary: The VIM editor
url: http://www.vim.org/
rpm_license: Vim
rpm_group: Applications/Editors
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/vim-7.4.160-1.el7.src.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.


pkgId: 574c31b9e3e8c70537e008999dc132d1fa6a7cc55547741e0f14e845f745ef18
name: vinagre
arch: src
version: 3.14.3
epoch: 0
release: 11.el7
summary: VNC client for GNOME
url: https://wiki.gnome.org/Apps/Vinagre
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vinagre-3.14.3-11.el7.src.rpm
checksum_type: sha256
description:
  Vinagre is a VNC client for the GNOME desktop.

  With Vinagre you can have several connections open simultaneously, bookmark
  your servers thanks to the Favorites support, store the passwords in the
  GNOME keyring, and browse the network to look for VNC servers.

  Apart from the VNC protocol, vinagre supports Spice and RDP.


pkgId: f053f26a6e4791b531efdb759eb6c88f097c2dac93349559a02ce34800ef5667
name: vino
arch: src
version: 3.14.2
epoch: 0
release: 1.el7
summary: A remote desktop system for GNOME
url: http://www.gnome.org
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vino-3.14.2-1.el7.src.rpm
checksum_type: sha256
description:
  Vino is a VNC server for GNOME. It allows remote users to
  connect to a running GNOME session using VNC.


pkgId: d6d4cbe96aa86a3481a7a22aaeeac149da7ce81e92a2f87343af1c7d055f2918
name: virt-manager
arch: src
version: 1.4.0
epoch: 0
release: 2.el7
summary: Desktop tool for managing virtual machines via libvirt
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_group: Applications/Emulators
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/virt-manager-1.4.0-2.el7.src.rpm
checksum_type: sha256
description:
  Virtual Machine Manager provides a graphical tool for administering virtual
  machines for KVM, Xen, and LXC. Start, stop, add or remove virtual devices,
  connect to a graphical or serial console, and see resource usage statistics
  for existing VMs on local or remote machines. Uses libvirt as the backend
  management API.


pkgId: 3edffe3d8b9720bd1b5ee600a3bdeb03e991fc77728f76a484a9c0f59f231251
name: virt-top
arch: src
version: 1.0.8
epoch: 0
release: 8.el7
summary: Utility like top(1) for displaying virtualization stats
url: http://people.redhat.com/~rjones/virt-top/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/virt-top-1.0.8-8.el7.src.rpm
checksum_type: sha256
description:
  virt-top is a 'top(1)'-like utility for showing stats of virtualized
  domains.  Many keys and command line options are the same as for
  ordinary 'top'.

  It uses libvirt so it is capable of showing stats across a variety of
  different virtualization systems.


pkgId: a56f193aee3c81b8013185466032158de4f42859f7e39547c0d1306ac67d0ed0
name: virt-viewer
arch: src
version: 2.0
epoch: 0
release: 12.el7
summary: Virtual Machine Viewer
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/virt-viewer-2.0-12.el7.src.rpm
checksum_type: sha256
description:
  Virtual Machine Viewer provides a graphical console client for connecting
  to virtual machines. It uses the GTK-VNC or SPICE-GTK widgets to provide
  the display, and libvirt for looking up VNC/SPICE server details.


pkgId: 7e880c9f34788932fe8d209be4452abeb38f392d58a027b62f3fb08294e68c21
name: virt-what
arch: src
version: 1.13
epoch: 0
release: 8.el7
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/virt-what-1.13-8.el7.src.rpm
checksum_type: sha256
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or can't detect.

  Current types of virtualization detected:

   - hyperv       Microsoft Hyper-V
   - kvm          Linux Kernel Virtual Machine (KVM)
   - openvz       OpenVZ or Virtuozzo
   - powervm_lx86 IBM PowerVM Lx86 Linux/x86 emulator
   - qemu         QEMU (unaccelerated)
   - uml          User-Mode Linux (UML)
   - virtage      Hitachi Virtualization Manager (HVM) Virtage LPAR
   - virtualbox   VirtualBox
   - virtualpc    Microsoft VirtualPC
   - vmware       VMware
   - xen          Xen
   - xen-dom0     Xen dom0 (privileged domain)
   - xen-domU     Xen domU (paravirtualized guest domain)
   - xen-hvm      Xen guest fully virtualized (HVM)


pkgId: f7888a8e35653269965349670c3eb902a9f86f267fc1c474e56efb80a95925a5
name: virt-who
arch: src
version: 0.17
epoch: 0
release: 10.el7
summary: Agent for reporting virtual guest IDs to subscription-manager
url: https://fedorahosted.org/virt-who/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/virt-who-0.17-10.el7.src.rpm
checksum_type: sha256
description:
  Agent that collects information about virtual guests present in the system and
  report them to the subscription manager.


pkgId: 1accd2f94b6434d6715c6fd5a016c40fc143b30676371d356760b4f0ea58233c
name: virtuoso-opensource
arch: src
version: 6.1.6
epoch: 1
release: 6.el7
summary: A high-performance object-relational SQL database
url: http://virtuoso.openlinksw.com/wiki/main/
rpm_license: GPLv2 with exceptions
rpm_group: Applications/Databases
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/virtuoso-opensource-6.1.6-6.el7.src.rpm
checksum_type: sha256
description:
  Virtuoso is a scalable cross-platform server that combines SQL/RDF/XML
  Data Management with Web Application Server and Web Services Platform
  functionality.


pkgId: a80cba26ab82ecf63cf95aac34a83b19feaa075b2528d8d36a6297b20f70e1c0
name: vlgothic-fonts
arch: src
version: 20130607
epoch: 0
release: 2.el7
summary: Japanese TrueType font
url: http://dicey.org/vlgothic
rpm_license: mplus and BSD
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/vlgothic-fonts-20130607-2.el7.src.rpm
checksum_type: sha256
description:
  VLGothic provides Japanese TrueType fonts from the Vine Linux project.
  Most of the glyphs are taken from the M+ and Sazanami Gothic fonts,
  but some have also been improved by the project.

  This package provides the monospace VLGothic font.


pkgId: 05a62b66efbfdf9d78bb22508173b8f4be35668bd6d49021ccaec792f557c0f8
name: volume_key
arch: src
version: 0.3.9
epoch: 0
release: 7.el7
summary: An utility for manipulating storage encryption keys and passphrases
url: https://fedorahosted.org/volume_key/
rpm_license: GPLv2
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/volume_key-0.3.9-7.el7.src.rpm
checksum_type: sha256
description:
  This package provides a command-line tool for manipulating storage volume
  encryption keys and storing them separately from volumes.

  The main goal of the software is to allow restoring access to an encrypted
  hard drive if the primary user forgets the passphrase.  The encryption key
  back up can also be useful for extracting data after a hardware or software
  failure that corrupts the header of the encrypted volume, or to access the
  company data after an employee leaves abruptly.


pkgId: 61be435b465b1392944d62455a6a17ab02fc008a2da61c25a7a61bef8d57236a
name: vorbis-tools
arch: src
version: 1.4.0
epoch: 1
release: 12.el7
summary: The Vorbis General Audio Compression Codec tools
url: http://www.xiph.org/
rpm_license: GPLv2
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/vorbis-tools-1.4.0-12.el7.src.rpm
checksum_type: sha256
description:
  Ogg Vorbis is a fully open, non-proprietary, patent- and royalty-free,
  general-purpose compressed audio format for audio and music at fixed
  and variable bitrates from 16 to 128 kbps/channel.

  The vorbis package contains an encoder, a decoder, a playback tool, and a
  comment editor.


pkgId: af9fc894a3e5747ce74d39a7a9cd6412051aa62b6c7e80a540aa4feaee5c2cf9
name: vte291
arch: src
version: 0.38.4
epoch: 0
release: 2.el7
summary: Terminal emulator library
url: http://www.gnome.org/
rpm_license: LGPLv2+
rpm_group: Unspecified
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vte291-0.38.4-2.el7.src.rpm
checksum_type: sha256
description:
  VTE is a library implementing a terminal emulator widget for GTK+. VTE
  is mainly used in gnome-terminal, but can also be used to embed a
  console/terminal in games, editors, IDEs, etc.


pkgId: 9f5490c6c243a4f74352ddca589360a34a246df71d8e84838f30727d974f3a80
name: vte3
arch: src
version: 0.36.5
epoch: 0
release: 1.el7
summary: Terminal emulator library
url: http://www.gnome.org/
rpm_license: LGPLv2+
rpm_group: User Interface/X
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/vte3-0.36.5-1.el7.src.rpm
checksum_type: sha256
description:
  VTE is a library implementing a terminal emulator widget for GTK+. VTE
  is mainly used in gnome-terminal, but can also be used to embed a
  console/terminal in games, editors, IDEs, etc.

  VTE supports Unicode and character set conversion, as well as emulating
  any terminal known to the system's terminfo database.


pkgId: d4d779d5a10c8f4d7b8f721bbaf3b236ef8a19633a7f7551db72ca7e0f936419
name: watchdog
arch: src
version: 5.13
epoch: 0
release: 11.el7
summary: Software and/or Hardware watchdog daemon
url: http://sourceforge.net/projects/watchdog/
rpm_license: GPLv2+
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/watchdog-5.13-11.el7.src.rpm
checksum_type: sha256
description:
  The watchdog program can be used as a powerful software watchdog daemon
  or may be alternately used with a hardware watchdog device such as the
  IPMI hardware watchdog driver interface to a resident Baseboard
  Management Controller (BMC).  watchdog periodically writes to /dev/watchdog;
  the interval between writes to /dev/watchdog is configurable through settings
  in the watchdog sysconfig file.  This configuration file is also used to
  set the watchdog to be used as a hardware watchdog instead of its default
  software watchdog operation.  In either case, if the device is open but not
  written to within the configured time period, the watchdog timer expiration
  will trigger a machine reboot. When operating as a software watchdog, the
  ability to reboot will depend on the state of the machine and interrupts.
  When operating as a hardware watchdog, the machine will experience a hard
  reset (or whatever action was configured to be taken upon watchdog timer
  expiration) initiated by the BMC.


pkgId: 0c93316bdd09055562584b7ba09f8ff6a410f83df61a92923bb7b52f5be0797e
name: wavpack
arch: src
version: 4.60.1
epoch: 0
release: 9.el7
summary: A completely open audiocodec
url: http://www.wavpack.com/
rpm_license: BSD
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wavpack-4.60.1-9.el7.src.rpm
checksum_type: sha256
description:
  WavPack is a completely open audio compression format providing lossless,
  high-quality lossy, and a unique hybrid compression mode. Although the
  technology is loosely based on previous versions of WavPack, the new
  version 4 format has been designed from the ground up to offer unparalleled
  performance and functionality.


pkgId: 213b10893818e462d1ca77e54693bf8358fafae4385cd765d28af2bf659a1b73
name: webkitgtk3
arch: src
version: 2.4.9
epoch: 0
release: 6.el7
summary: GTK+ Web content engine library
url: http://www.webkitgtk.org/
rpm_license: LGPLv2+ and BSD
rpm_group: Development/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/webkitgtk3-2.4.9-6.el7.src.rpm
checksum_type: sha256
description:
  WebKitGTK+ is the port of the portable web rendering engine WebKit to the
  GTK+ platform.

  This package contains WebKitGTK+ for GTK+ 3.


pkgId: a1ba219c973947cad21d19f2019f5a5102823f26e7785d68c4f1ae1320983a07
name: webrtc-audio-processing
arch: src
version: 0.1
epoch: 0
release: 5.el7
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/webrtc-audio-processing-0.1-5.el7.src.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 1e91f8c47492b1b3bccea07889a09137a3fd7fc3e35897dc75af4b758fa30986
name: wget
arch: src
version: 1.14
epoch: 0
release: 13.el7
summary: A utility for retrieving files using the HTTP or FTP protocols
url: http://www.gnu.org/software/wget/
rpm_license: GPLv3+
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/wget-1.14-13.el7.src.rpm
checksum_type: sha256
description:
  GNU Wget is a file retrieval utility which can use either the HTTP or
  FTP protocols. Wget features include the ability to work in the
  background while you are logged out, recursive retrieval of
  directories, file name wildcard matching, remote file timestamp
  storage and comparison, use of Rest with FTP servers and Range with
  HTTP servers to retrieve files over slow or unstable connections,
  support for Proxy servers, and configurability.


pkgId: 5f15e1d8cea4c480c7edc57ad65d692d79b71a0295256efe5c2222eed047a8dc
name: which
arch: src
version: 2.20
epoch: 0
release: 7.el7
summary: Displays where a particular program in your path is located
url: http://www.xs4all.nl/~carlo17/which/
rpm_license: GPLv3
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/which-2.20-7.el7.src.rpm
checksum_type: sha256
description:
  The which command shows the full pathname of a specified program, if
  the specified program is in your PATH.


pkgId: 3552075c15c9dc4afb6341da004a0d29e5194608f38c45e520c2d238350e27be
name: whois
arch: src
version: 5.1.1
epoch: 0
release: 2.el7
summary: Improved WHOIS client
url: http://www.linux.it/~md/software/
rpm_license: GPLv2+
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/whois-5.1.1-2.el7.src.rpm
checksum_type: sha256
description:
  Searches for an object in a RFC 3912 database.

  This version of the WHOIS client tries to guess the right server to ask for
  the specified object. If no guess can be made it will connect to
  whois.networksolutions.com for NIC handles or whois.arin.net for IPv4
  addresses and network names.


pkgId: 2adffcdedb1d522ae287156080c904fd350cc3e34fe61fde8f26b749c1d2affd
name: wireshark
arch: src
version: 1.10.14
epoch: 0
release: 10.el7
summary: Network traffic analyzer
url: http://www.wireshark.org/
rpm_license: GPL+
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/wireshark-1.10.14-10.el7.src.rpm
checksum_type: sha256
description:
  Wireshark is a network traffic analyzer for Unix-ish operating systems.

  This package lays base for libpcap, a packet capture and filtering
  library, contains command-line utilities, contains plugins and
  documentation for wireshark. A graphical user interface is packaged
  separately to GTK+ package.


pkgId: 643612ec9cfe1f1fa81bf32fc28f65b8f69e471bb88de840009bcb1467887ef3
name: woodstox-core
arch: src
version: 4.1.2
epoch: 0
release: 8.el7
summary: High-performance XML processor
url: http://woodstox.codehaus.org/
rpm_license: ASL 2.0 or LGPLv2+
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/woodstox-core-4.1.2-8.el7.src.rpm
checksum_type: sha256
description:
  Woodstox is a high-performance validating namespace-aware StAX-compliant
  (JSR-173) Open Source XML-processor written in Java.
  XML processor means that it handles both input (== parsing)
  and output (== writing, serialization)), as well as supporting tasks
  such as validation.


pkgId: 9d7d09f928aa9bdc7d45442253a4bbed5b1758f192856ddb059ca1849a7b5756
name: wordnet
arch: src
version: 3.0
epoch: 0
release: 21.el7
summary: A lexical database for the English language
url: http://wordnet.princeton.edu/
rpm_license: MIT and GPLv2+
rpm_group: Applications/Text
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wordnet-3.0-21.el7.src.rpm
checksum_type: sha256
description:
  WordNet is a large lexical database of English, developed under the direction
  of George A. Miller. Nouns, verbs, adjectives and adverbs are grouped into sets
  of cognitive synonyms (synsets), each expressing a distinct concept. Synsets
  are interlinked by means of conceptual-semantic and lexical relations. The
  resulting network of meaningfully related words and concepts can be navigated
  with the browser. WordNet is also freely and publicly available for download.
  WordNet's structure makes it a useful tool for computational linguistics and
  natural language processing.


pkgId: 5afa1a0c9669ca5ecbf3d1a3305d1d8a51251d0b3dd68d8803d384c066f7159a
name: words
arch: src
version: 3.0
epoch: 0
release: 22.el7
summary: A dictionary of English words for the /usr/share/dict directory
url: http://en.wikipedia.org/wiki/Moby_Project
rpm_license: Public Domain
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/words-3.0-22.el7.src.rpm
checksum_type: sha256
description:
  The words file is a dictionary of English words for the
  /usr/share/dict directory. Some programs use this database of
  words to check spelling. Password checkers use it to look for bad
  passwords.


pkgId: 5fc22fe952acbe08b5aafb1fcc952b97d8b24e6d231794a9a3c53e4353b7a476
name: wpa_supplicant
arch: src
version: 2.0
epoch: 1
release: 20.el7
summary: WPA/WPA2/IEEE 802.1X Supplicant
url: http://w1.fi/wpa_supplicant/
rpm_license: BSD
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/wpa_supplicant-2.0-20.el7.src.rpm
checksum_type: sha256
description:
  wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
  for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
  component that is used in the client stations. It implements key negotiation
  with a WPA Authenticator and it controls the roaming and IEEE 802.11
  authentication/association of the wlan driver.


pkgId: d06dcfa5095ef3419ebc8b2dd8b25f5ee6630768b483879dc558df813ae27939
name: wqy-microhei-fonts
arch: src
version: 0.2.0
epoch: 0
release: 0.12.beta.el7
summary: Compact Chinese fonts derived from Droid
url: http://wenq.org/enindex.cgi?MicroHei(en)
rpm_license: ASL 2.0 or GPLv3 with exceptions
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wqy-microhei-fonts-0.2.0-0.12.beta.el7.src.rpm
checksum_type: sha256
description:
  A new Sans Serif CJK font derived from Google's "Droid Sans Fallback"
  and covers the entire GBK code points (20932 Han glyphs).


pkgId: 0621500b24c7373a01c9f23f5c89cda0c44bef96d0902bbc0b4678c0efda935f
name: wqy-unibit-fonts
arch: src
version: 1.1.0
epoch: 0
release: 13.el7
summary: WenQuanYi Unibit Bitmap Font
url: http://wenq.org/enindex.cgi
rpm_license: GPLv2 with exceptions
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wqy-unibit-fonts-1.1.0-13.el7.src.rpm
checksum_type: sha256
description:
  The Wen Quan Yi Unibit is designed as a dual-width (16x16,16x8)
  bitmap font to provide the most complete international symbol
  coverage, serving as the system-wide fall-back font. This font
  has covered over 46000 Unicode code points in BMP.
  It is intended to supersede the outdated GNU Unifont.
  This font was created by merging the latest update of GNU
  Unifont [GPL] (by Roman Czyborra and David Starner et al., the
  font was last updated in 2004), WenQuanYi Bitmap Song [GPL]
  0.8.1 (by Qianqian Fang and WenQuanYi contributors) and
  Fixed-16x8 [public domain] bitmap fonts from X11 core fonts.
  The entire CJK Unified Ideographics (U4E00-U9FA5) and CJK Unified
  Ideographics Extension A(U3400-U4DB5) blocks were replaced by
  high-quality glyphs from China National Standard GB19966-2005
  (public domain). Near a thousand of non-CJK characters were improved by
  WenQuanYi contributors via their collaborative font editing website at
  http://wenq.org/eindex.cgi?Unicode_Chart_EN


pkgId: 88605218fafa3f52834c532839b094d048e5cb039ddc0987492ce3039dd1b691
name: wqy-zenhei-fonts
arch: src
version: 0.9.46
epoch: 0
release: 11.el7
summary: WenQuanYi Zen Hei CJK Font
url: http://wenq.org/enindex.cgi
rpm_license: GPLv2 with exceptions
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wqy-zenhei-fonts-0.9.46-11.el7.src.rpm
checksum_type: sha256
description:
  WenQuanYi Zen Hei is a Hei-Ti style (sans-serif type) Chinese
  outline font. It is designed for general purpose text formatting
  and on-screen display of Chinese characters and symbols from
  many other languages. The embolden strokes of the font glyphs
  produces enhanced screen contrast, making it easier to read
  recognize. The embedded bitmap glyphs further enhance on-screen
  performance, which can be enabled with the provided configuration
  files. WenQuanYi Zen Hei provides a rather complete coverage to
  Chinese Hanzi glyphs, including both simplified and traditional
  forms. The total glyph number in this font is over 35,000, including
  over 21,000 Chinese Hanzi. This font has full coverage to GBK(CP936)
  charset, CJK Unified Ideographs, as well as the code-points
  needed for zh_cn, zh_sg, zh_tw, zh_hk, zh_mo, ja (Japanese)
  and ko (Korean) locales for fontconfig. Starting from version
  0.8, this font package has contained two font families, i.e.
  the proportionally-spaced Zen Hei, and a mono-spaced face
  named "WenQuanYi Zen Hei Mono".


pkgId: e68d3c9eea53807a1cc02f1908617dc7da9b0abbb68af39313b025b1687f4630
name: ws-jaxme
arch: src
version: 0.5.2
epoch: 0
release: 10.el7
summary: Open source implementation of JAXB
url: http://ws.apache.org/jaxme/
rpm_license: ASL 2.0
rpm_group: Development/Libraries/Java
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/ws-jaxme-0.5.2-10.el7.src.rpm
checksum_type: sha256
description:
  A Java/XML binding compiler takes as input a schema
  description (in most cases an XML schema, but it may
  be a DTD, a RelaxNG schema, a Java class inspected
  via reflection, or a database schema). The output is
  a set of Java classes:
  * A Java bean class matching the schema description.
    (If the schema was obtained via Java reflection,
    the original Java bean class.)
  * Read a conforming XML document and convert it into
    the equivalent Java bean.
  * Vice versa, marshal the Java bean back into the
    original XML document.


pkgId: fe71a642bef110dd7b2121ad835453aeeade62a3116fd8095918df71a774d438
name: wsdl4j
arch: src
version: 1.6.3
epoch: 0
release: 3.el7
summary: Web Services Description Language Toolkit for Java
url: http://sourceforge.net/projects/wsdl4j
rpm_license: CPL
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wsdl4j-1.6.3-3.el7.src.rpm
checksum_type: sha256
description:
  The Web Services Description Language for Java Toolkit (WSDL4J) allows the
  creation, representation, and manipulation of WSDL documents describing
  services.  This code base will eventually serve as a reference implementation
  of the standard created by JSR110.


pkgId: f60c6f3f87b0f7b186114d4a06ce713adc64f66861b18a3f1f3d714758828e37
name: wvdial
arch: src
version: 1.61
epoch: 0
release: 9.el7
summary: A heuristic autodialer for PPP connections
url: http://alumnit.ca/wiki/?WvDial
rpm_license: LGPLv2+
rpm_group: System Environment/Daemons
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/wvdial-1.61-9.el7.src.rpm
checksum_type: sha256
description:
  WvDial automatically locates and configures modems and can log into
  almost any ISP's server without special configuration. You need to
  input the username, password, and phone number, and then WvDial will
  negotiate the PPP connection using any mechanism needed.


pkgId: 5a8c54ff5ce9435b851482480dfad36eb20df9db6f62139ec9afa93795e702f3
name: x3270
arch: src
version: 3.3.12ga12
epoch: 0
release: 4.el7
summary: An X Window System based IBM 3278/3279 terminal emulator
url: http://x3270.sourceforge.net/
rpm_license: BSD
rpm_group: Applications/Internet
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/x3270-3.3.12ga12-4.el7.src.rpm
checksum_type: sha256
description:
  The x3270 package contains files needed for emulating the IBM 3278/3279
  terminals, commonly used with mainframe applications.

  You will also need to install a frontend for x3270. Available frontends
  are x3270-x11 (for the X Window System) and x3270-text (for text mode).


pkgId: b5424efec3e34f4148c0c52ff4918b38786b7afeb710800c8bb83e3e781be87a
name: x86info
arch: src
version: 1.30
epoch: 1
release: 6.el7
summary: x86 processor information tool.
url: http://www.codemonkey.org.uk/projects/x86info
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/x86info-1.30-6.el7.src.rpm
checksum_type: sha256
description:
  x86info displays diagnostic information about x86 processors, such
  as cache configuration and supported features.


pkgId: 96ae4873706cc9a96e9616e71ac62e7a2d733521cadf0264fb7057fa1306a555
name: xalan-j2
arch: src
version: 2.7.1
epoch: 0
release: 23.el7
summary: Java XSLT processor
url: http://xalan.apache.org/
rpm_license: ASL 2.0 and W3C
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xalan-j2-2.7.1-23.el7.src.rpm
checksum_type: sha256
description:
  Xalan is an XSLT processor for transforming XML documents into HTML,
  text, or other XML document types. It implements the W3C Recommendations
  for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
  be used from the command line, in an applet or a servlet, or as a module
  in other program.


pkgId: 120a8f819a7936b42adf82d09a49c34769dc95c51da6313f81193be45d36425c
name: xbean
arch: src
version: 3.13
epoch: 0
release: 6.el7
summary: Java plugin based web server
url: http://geronimo.apache.org/xbean/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xbean-3.13-6.el7.src.rpm
checksum_type: sha256
description:
  The goal of XBean project is to create a plugin based server
  analogous to Eclipse being a plugin based IDE. XBean will be able to
  discover, download and install server plugins from an Internet based
  repository. In addition, we include support for multiple IoC systems,
  support for running with no IoC system, JMX without JMX code,
  lifecycle and class loader management, and a rock solid Spring
  integration.


pkgId: a1b99622e17d41a1a2b5ac3f0fb9da9b0b0bcd94480bb2d8b4f1eed164d5a3e2
name: xcb-proto
arch: src
version: 1.11
epoch: 0
release: 1.el7
summary: XCB protocol descriptions
url: http://xcb.freedesktop.org/
rpm_license: MIT
rpm_group: Development/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-proto-1.11-1.el7.src.rpm
checksum_type: sha256
description:
  XCB is a project to enable efficient language bindings to the X11 protocol.
  This package contains the protocol descriptions themselves.  Language
  bindings use these protocol descriptions to generate code for marshalling
  the protocol.


pkgId: 60ba8e8cb2f5bd7887a6275e1e02107087d746d0ddc5bb0698261f1300205b41
name: xcb-util
arch: src
version: 0.4.0
epoch: 0
release: 2.el7
summary: Convenience libraries sitting on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-util-0.4.0-2.el7.src.rpm
checksum_type: sha256
description:
  The xcb-util module provides a number of libraries which sit on top of
  libxcb, the core X protocol library, and some of the extension
  libraries. These experimental libraries provide convenience functions
  and interfaces which make the raw X protocol more usable. Some of the
  libraries also provide client-side code which is not strictly part of
  the X protocol but which have traditionally been provided by Xlib.


pkgId: fe1a358952a32b78756585d184d02583937aea3171c3960050e1c6154f809451
name: xcb-util-image
arch: src
version: 0.4.0
epoch: 0
release: 2.el7
summary: Port of Xlib's XImage and XShmImage functions on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-util-image-0.4.0-2.el7.src.rpm
checksum_type: sha256
description:
  XCB util-image module provides the following library:

    - image: Port of Xlib's XImage and XShmImage functions.


pkgId: e21ffd0f7a06548ec3d776a246ca8de94d8be71ec10014fa69459976da13fa6d
name: xcb-util-keysyms
arch: src
version: 0.4.0
epoch: 0
release: 1.el7
summary: Standard X key constants and keycodes conversion on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-util-keysyms-0.4.0-1.el7.src.rpm
checksum_type: sha256
description:
  XCB util-keysyms module provides the following library:

    - keysyms: Standard X key constants and conversion to/from keycodes.


pkgId: 9b61f115c55e902f149d98d7516cd22e20e811ca4acf9855a94a03b314d4763b
name: xcb-util-renderutil
arch: src
version: 0.3.9
epoch: 0
release: 3.el7
summary: Convenience functions for the Render extension
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-util-renderutil-0.3.9-3.el7.src.rpm
checksum_type: sha256
description:
  XCB util-renderutil module provides the following library:

    - renderutil: Convenience functions for the Render extension.


pkgId: d4b60c31b6f772d0762e263bf9df84cd7005a07b964c5534241679a832ffc892
name: xcb-util-wm
arch: src
version: 0.4.1
epoch: 0
release: 5.el7
summary: Client and window-manager helper library on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xcb-util-wm-0.4.1-5.el7.src.rpm
checksum_type: sha256
description:
  XCB util-wm module provides the following libraries:

    - ewmh: Both client and window-manager helpers for EWMH.
    - icccm: Both client and window-manager helpers for ICCCM.


pkgId: e46397238c829e9c48200e49f64c9eb75ea03b1749a728756fcea89afda6950a
name: xchat
arch: src
version: 2.8.8
epoch: 1
release: 23.el7
summary: A popular and easy to use graphical IRC (chat) client
url: http://www.xchat.org
rpm_license: GPLv2+
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xchat-2.8.8-23.el7.src.rpm
checksum_type: sha256
description:
  X-Chat is an easy to use graphical IRC chat client for the X Window System.
  It allows you to join multiple IRC channels (chat rooms) at the same time,
  talk publicly, private one-on-one conversations etc. Even file transfers
  are possible.

  This includes the plugins to run the Perl and Python scripts.


pkgId: b805184e6385db872b5ffa31c8fdbc49b46d1e271f6b5a6c4eb4952ea3f05d69
name: xdelta
arch: src
version: 3.0.7
epoch: 0
release: 4.el7
summary: A binary file delta generator
url: http://xdelta.org/
rpm_license: GPLv2
rpm_group: Development/Tools
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xdelta-3.0.7-4.el7.src.rpm
checksum_type: sha256
description:
  Xdelta (X for XCF: the eXperimental Computing Facility at Berkeley) is
  a binary delta generator (like a diff program for binaries) and an RCS
  version control replacement library. Xdelta uses a binary file delta
  algorithm to replace the standard diff program used by RCS


pkgId: 02883fa78c831029861a44b96cff2b2265deb2c4de4d176f658e5cd184e5494d
name: xdg-user-dirs
arch: src
version: 0.15
epoch: 0
release: 4.el7
summary: Handles user special directories
url: http://freedesktop.org/wiki/Software/xdg-user-dirs
rpm_license: GPLv2+ and MIT
rpm_group: User Interface/Desktops
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xdg-user-dirs-0.15-4.el7.src.rpm
checksum_type: sha256
description:
  Contains xdg-user-dirs-update that updates folders in a users
  homedirectory based on the defaults configured by the administrator.


pkgId: ee3221ccd4b1fab9ad443cb331ee3b308f96b401f1fadb87d3f0eadc6c00706a
name: xdg-user-dirs-gtk
arch: src
version: 0.10
epoch: 0
release: 4.el7
summary: Gnome integration of special directories
url: http://freedesktop.org/wiki/Software/xdg-user-dirs
rpm_license: GPL+
rpm_group: User Interface/Desktops
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xdg-user-dirs-gtk-0.10-4.el7.src.rpm
checksum_type: sha256
description:
  Contains some integration of xdg-user-dirs with the gnome
  desktop, including creating default bookmarks and detecting
  locale changes.


pkgId: 5d6aaf7adf04f8222694f9efff469aafe615e21137e91b592fee95978e9def25
name: xdg-utils
arch: src
version: 1.1.0
epoch: 0
release: 0.17.20120809git.el7
summary: Basic desktop integration functions
url: http://portland.freedesktop.org/
rpm_license: MIT
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xdg-utils-1.1.0-0.17.20120809git.el7.src.rpm
checksum_type: sha256
description:
  The xdg-utils package is a set of simple scripts that provide basic
  desktop integration functions for any Free Desktop, such as Linux.
  They are intended to provide a set of defacto standards.
  This means that:
  *  Third party software developers can rely on these xdg-utils
     for all of their simple integration needs.
  *  Developers of desktop environments can make sure that their
     environments are well supported
  *  Distribution vendors can provide custom versions of these utilities

  The following scripts are provided at this time:
  * xdg-desktop-icon      Install icons to the desktop
  * xdg-desktop-menu      Install desktop menu items
  * xdg-email             Send mail using the user's preferred e-mail composer
  * xdg-icon-resource     Install icon resources
  * xdg-mime              Query information about file type handling and
                          install descriptions for new file types
  * xdg-open              Open a file or URL in the user's preferred application
  * xdg-screensaver       Control the screensaver
  * xdg-settings          Get various settings from the desktop environment


pkgId: cd80012ecae0520634c8454891cbefc0083841c46e9559c5bd6431bcc76eae94
name: xerces-c
arch: src
version: 3.1.1
epoch: 0
release: 8.el7_2
summary: Validating XML Parser
url: http://xml.apache.org/xerces-c/
rpm_license: ASL 2.0
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xerces-c-3.1.1-8.el7_2.src.rpm
checksum_type: sha256
description:
  Xerces-C is a validating XML parser written in a portable
  subset of C++. Xerces-C makes it easy to give your application the
  ability to read and write XML data. A shared library is provided for
  parsing, generating, manipulating, and validating XML
  documents. Xerces-C is faithful to the XML 1.0 recommendation and
  associated standards: XML 1.0 (Third Edition), XML 1.1 (First
  Edition), DOM Level 1, 2, 3 Core, DOM Level 2.0 Traversal and Range,
  DOM Level 3.0 Load and Save, SAX 1.0 and SAX 2.0, Namespaces in XML,
  Namespaces in XML 1.1, XML Schema, XML Inclusions).


pkgId: 0bcdec9f9523648702b2dc7aaa6c0a10bf8b2586b9a7fba6d68db44b127bb852
name: xerces-j2
arch: src
version: 2.11.0
epoch: 0
release: 17.el7_0
summary: Java XML parser
url: http://xerces.apache.org/xerces2-j/
rpm_license: ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xerces-j2-2.11.0-17.el7_0.src.rpm
checksum_type: sha256
description:
  Welcome to the future! Xerces2 is the next generation of high performance,
  fully compliant XML parsers in the Apache Xerces family. This new version of
  Xerces introduces the Xerces Native Interface (XNI), a complete framework for
  building parser components and configurations that is extremely modular and
  easy to program.

  The Apache Xerces2 parser is the reference implementation of XNI but other
  parser components, configurations, and parsers can be written using the Xerces
  Native Interface. For complete design and implementation documents, refer to
  the XNI Manual.

  Xerces2 is a fully conforming XML Schema processor. For more information,
  refer to the XML Schema page.

  Xerces2 also provides a complete implementation of the Document Object Model
  Level 3 Core and Load/Save W3C Recommendations and provides a complete
  implementation of the XML Inclusions (XInclude) W3C Recommendation. It also
  provides support for OASIS XML Catalogs v1.1.

  Xerces2 is able to parse documents written according to the XML 1.1
  Recommendation, except that it does not yet provide an option to enable
  normalization checking as described in section 2.13 of this specification. It
  also handles name spaces according to the XML Namespaces 1.1 Recommendation,
  and will correctly serialize XML 1.1 documents if the DOM level 3 load/save
  APIs are in use.


pkgId: c8e5738c7c92c19c552c000f98022d35b014624817835b36b4103e4a82d45c11
name: xfsdump
arch: src
version: 3.1.4
epoch: 0
release: 1.el7
summary: Administrative utilities for the XFS filesystem
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xfsdump-3.1.4-1.el7.src.rpm
checksum_type: sha256
description:
  The xfsdump package contains xfsdump, xfsrestore and a number of
  other utilities for administering XFS filesystems.

  xfsdump examines files in a filesystem, determines which need to be
  backed up, and copies those files to a specified disk, tape or other
  storage medium.	 It uses XFS-specific directives for optimizing the
  dump of an XFS filesystem, and also knows how to backup XFS extended
  attributes.  Backups created with xfsdump are "endian safe" and can
  thus be transfered between Linux machines of different architectures
  and also between IRIX machines.

  xfsrestore performs the inverse function of xfsdump; it can restore a
  full backup of a filesystem.  Subsequent incremental backups can then
  be layered on top of the full backup.  Single files and directory
  subtrees may be restored from full or partial backups.


pkgId: e5ec74515705217d61c382759546906b27437d65b31e3a6634b2ff654e7877c8
name: xfsprogs
arch: src
version: 4.5.0
epoch: 0
release: 8.el7
summary: Utilities for managing the XFS filesystem
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL+ and LGPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xfsprogs-4.5.0-8.el7.src.rpm
checksum_type: sha256
description:
  A set of commands to use the XFS filesystem, including mkfs.xfs.

  XFS is a high performance journaling filesystem which originated
  on the SGI IRIX platform.  It is completely multi-threaded, can
  support large files and large filesystems, extended attributes,
  variable block sizes, is extent based, and makes extensive use of
  Btrees (directories, extents, free space) to aid both performance
  and scalability.

  Refer to the documentation at http://oss.sgi.com/projects/xfs/
  for complete details.  This implementation is on-disk compatible
  with the IRIX version of XFS.


pkgId: 0c962d0b725f12dc9081206e5c1ed35589f74c8a26eb0e3139ad5fafe33fbd3f
name: xguest
arch: src
version: 1.0.10
epoch: 0
release: 32.el7
summary: Creates xguest user as a locked down user
url: http://people.fedoraproject.org/~dwalsh/xguest/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xguest-1.0.10-32.el7.src.rpm
checksum_type: sha256
description:
  Installing this package sets up the xguest user to be used as a temporary
  account to switch to or as a kiosk user account. The account is disabled unless
  SELinux is in enforcing mode. The user is only allowed to log in via graphical login program.
  The home and temporary directories of the user will be polyinstantiated and
  mounted on tmpfs.


pkgId: 3c030e9dab077ad4dc967102080bb76f57a18514e5a73b078e9939a234194a1a
name: xhtml1-dtds
arch: src
version: 1.0
epoch: 0
release: 20020801.11.el7
summary: XHTML 1.0 document type definitions
url: http://www.w3.org/TR/2002/REC-xhtml1-20020801/
rpm_license: W3C
rpm_group: Applications/Text
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xhtml1-dtds-1.0-20020801.11.el7.src.rpm
checksum_type: sha256
description:
  This provides the DTDs of the Second Edition of XHTML 1.0, a reformulation
  of HTML 4 as an XML 1.0 application, and three DTDs corresponding to the
  ones defined by HTML 4. The semantics of the elements and their attributes
  are defined in the W3C Recommendation for HTML 4. These semantics provide
  the foundation for future extensibility of XHTML.


pkgId: fd87005e2eb4626e863904b62fac8e19c285773159016a9e6eaa92b3e2eb0f90
name: xhtml2fo-style-xsl
arch: src
version: 20051222
epoch: 0
release: 9.el7
summary: Antenna House, Inc. XHTML to XSL:FO stylesheets
url: http://www.antennahouse.com/XSLsample/XSLsample.htm
rpm_license: Copyright only
rpm_group: Applications/Text
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xhtml2fo-style-xsl-20051222-9.el7.src.rpm
checksum_type: sha256
description:
  These XSL stylesheets allow you to transform any XHTML document to FO.
  With a XSL:FO processor you could create PDF versions of XHTML documents.


pkgId: 53d6d02aed8cb3e7b11c4d7b3772bd6be9be9f9e76ccbf12e332838a7f8a7670
name: xinetd
arch: src
version: 2.3.15
epoch: 2
release: 13.el7
summary: A secure replacement for inetd
url: http://www.xinetd.org
rpm_license: xinetd
rpm_group: System Environment/Daemons
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xinetd-2.3.15-13.el7.src.rpm
checksum_type: sha256
description:
  Xinetd is a secure replacement for inetd, the Internet services
  daemon. Xinetd provides access control for all services based on the
  address of the remote host and/or on time of access and can prevent
  denial-of-access attacks. Xinetd provides extensive logging, has no
  limit on the number of server arguments, and lets you bind specific
  services to specific IP addresses on your host machine. Each service
  has its own specific configuration file for Xinetd; the files are
  located in the /etc/xinetd.d directory.


pkgId: 5b1aab63b8ccf08fc8f2da79e90be19d91da3c4c4154be645c6fe2139896632f
name: xkeyboard-config
arch: src
version: 2.14
epoch: 0
release: 1.el7
summary: X Keyboard Extension configuration data
url: http://www.freedesktop.org/wiki/Software/XKeyboardConfig
rpm_license: MIT
rpm_group: User Interface/X
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xkeyboard-config-2.14-1.el7.src.rpm
checksum_type: sha256
description:
  This package contains configuration data used by the X Keyboard Extension
  (XKB), which allows selection of keyboard layouts when using a graphical
  interface.


pkgId: 8a5ef11710c0e559bdd1eaeb80916cbeaa607723fcef8f8fba91eaaeadf568f1
name: xml-commons-apis
arch: src
version: 1.4.01
epoch: 0
release: 16.el7
summary: APIs for DOM, SAX, and JAXP
url: http://xml.apache.org/commons/
rpm_license: ASL 2.0 and W3C and Public Domain
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xml-commons-apis-1.4.01-16.el7.src.rpm
checksum_type: sha256
description:
  xml-commons-apis is designed to organize and have common packaging for
  the various externally-defined standard interfaces for XML. This
  includes the DOM, SAX, and JAXP.


pkgId: 24de1aa94532ce0090fa0e402fa2c8f70be6bf8846b189e43e223f4c359157d6
name: xml-commons-apis12
arch: src
version: 1.2.04
epoch: 0
release: 10.el7
summary: JAXP 1.2, DOM 2, SAX 2.0.1, SAX2-ext 1.0 apis
url: http://xml.apache.org/commons/
rpm_license: ASL 2.0 and W3C and Public Domain and ASL 1.1
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xml-commons-apis12-1.2.04-10.el7.src.rpm
checksum_type: sha256
description:
  DOM 2 org.w3c.dom and SAX XML 2.0 org.xml.sax processor apis used
  by several pieces of Apache software. XSLT 1.0.
  This version includes the JAXP 1.2 APIs -- Java API for XML
  Processing 1.2, i.e. javax.xml{.parsers,.transform}


pkgId: 4694fa5ac8f3c4dc8612ab7f96994ef26b0a0ac4f8949f0e76639b28c77526e4
name: xmlgraphics-commons
arch: src
version: 1.5
epoch: 0
release: 3.el7
summary: XML Graphics Commons
url: http://xmlgraphics.apache.org/
rpm_license: ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmlgraphics-commons-1.5-3.el7.src.rpm
checksum_type: sha256
description:
  Apache XML Graphics Commons is a library that consists of
  several reusable components used by Apache Batik and
  Apache FOP. Many of these components can easily be used
  separately outside the domains of SVG and XSL-FO. You will
  find components such as a PDF library, an RTF library,
  Graphics2D implementations that let you generate PDF &
  PostScript files, and much more.


pkgId: f9d7037abfcb86c26b0997ce14aee3634c69402ab67a14a825615d1f42ca7dfb
name: xmlrpc
arch: src
version: 3.1.3
epoch: 1
release: 8.el7
summary: Java XML-RPC implementation
url: http://ws.apache.org/xmlrpc/
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmlrpc-3.1.3-8.el7.src.rpm
checksum_type: sha256
description:
  Apache XML-RPC is a Java implementation of XML-RPC, a popular protocol
  that uses XML over HTTP to implement remote procedure calls.
  Apache XML-RPC was previously known as Helma XML-RPC. If you have code
  using the Helma library, all you should have to do is change the import
  statements in your code from helma.xmlrpc.* to org.apache.xmlrpc.*.


pkgId: 5514aa76f63ad9cd6481e6f36f7a0b6a8b3d36a0b5d833e72bc6dfde03f23825
name: xmlrpc-c
arch: src
version: 1.32.5
epoch: 0
release: 1905.svn2451.el7
summary: A lightweight RPC library based on XML and HTTP
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT and GPL+ and Public Domain
rpm_group: System Environment/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmlrpc-c-1.32.5-1905.svn2451.el7.src.rpm
checksum_type: sha256
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C.


pkgId: 2854d6cf1bfc7f0200b9c2d72b19c6f685b3549f074ac4ce3c6bf037a7ccfc38
name: xmlsec1
arch: src
version: 1.2.20
epoch: 0
release: 5.el7
summary: Library providing support for "XML Signature" and "XML Encryption" standards
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xmlsec1-1.2.20-5.el7.src.rpm
checksum_type: sha256
description:
  XML Security Library is a C library based on LibXML2  and OpenSSL.
  The library was created with a goal to support major XML security
  standards "XML Digital Signature" and "XML Encryption".


pkgId: 28851b8fb0afc1f3c01a4fc895f6d8a67f530268d4bb66a6d76bc647bc79d23e
name: xmltoman
arch: src
version: 0.4
epoch: 0
release: 9.el7
summary: Scripts for converting XML to roff or HTML
url: http://sourceforge.net/projects/xmltoman/
rpm_license: GPLv2+
rpm_group: Applications/Publishing
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmltoman-0.4-9.el7.src.rpm
checksum_type: sha256
description:
  This package provides xmltoman and xmlmantohtml scripts, to compile
  the xml representation of manual page to either roff source, or HTML
  (while providing the CSS stylesheet for eye-candy look). XSL stylesheet
  for doing rougly the same job is provided.


pkgId: 6da0b61c6dfc45c96b2aed8ef69c607d29922c757d72ae236272e12fda424d90
name: xmlunit
arch: src
version: 1.4
epoch: 0
release: 6.el7
summary: Provides classes to do asserts on xml
url: http://xmlunit.sourceforge.net/
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmlunit-1.4-6.el7.src.rpm
checksum_type: sha256
description:
  XMLUnit extends JUnit to simplify unit testing of XML. It compares a control
  XML document to a test document or the result of a transformation, validates
  documents against a DTD, and (from v0.5) compares the results of XPath
  expressions.


pkgId: 02f84990bb5476997b00eae53f7e354a41b00cd0ee2339770aadad12f87cd233
name: xmvn
arch: src
version: 1.3.0
epoch: 0
release: 5.el7
summary: Local Extensions for Apache Maven
url: http://mizdebsk.fedorapeople.org/xmvn
rpm_license: ASL 2.0
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xmvn-1.3.0-5.el7.src.rpm
checksum_type: sha256
description:
  This package provides extensions for Apache Maven that can be used to
  manage system artifact repository and use it to resolve Maven
  artifacts in offline mode, as well as Maven plugins to help with
  creating RPM packages containing Maven artifacts.


pkgId: 02ad55673aed7583ab69c7cf530a8f269324d6be00a58191338efd58bb77bb4a
name: xorg-x11-drivers
arch: src
version: 7.7
epoch: 0
release: 6.el7
summary: X.Org X11 driver installation package
rpm_license: MIT
rpm_group: User Interface/X Hardware Support
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xorg-x11-drivers-7.7-6.el7.src.rpm
checksum_type: sha256
description:
  The purpose of this package is to require all of the individual X.Org
  driver rpms, to allow the OS installation software to install all drivers
  all at once, without having to track which individual drivers are present
  on each architecture.  By installing this package, it forces all of the
  individual driver packages to be installed.


pkgId: f51809bf402d5ce59c1ca1c109967730857d3d0a2bd9b0a4de5472020c4974fb
name: xorg-x11-drv-synaptics
arch: src
version: 1.8.2
epoch: 0
release: 1.el7
summary: Xorg X11 Synaptics touchpad input driver
url: http://www.x.org
rpm_license: MIT
rpm_group: User Interface/X Hardware Support
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xorg-x11-drv-synaptics-1.8.2-1.el7.src.rpm
checksum_type: sha256
description:
  This is the Synaptics touchpad driver for the X.Org X server. The following
  touchpad models are supported:
  * Synaptics
  * appletouch (Post February 2005 and October 2005 Apple Aluminium Powerbooks)
  * Elantech (EeePC)
  * bcm5974 (Macbook Air (Jan 2008), Macbook Pro Penryn (Feb 2008), iPhone
    (2007), iPod Touch (2008)

  Note that support for appletouch, elantech and bcm5974 requires the respective
  kernel module.
  A touchpad by default operates in compatibility mode by emulating a standard
  mouse. However, by using a dedicated driver, more advanced features of the
  touchpad become available.

  Features:

      * Movement with adjustable, non-linear acceleration and speed.
      * Button events through short touching of the touchpad ("tapping").
      * Double-Button events through double short touching of the touchpad.
      * Dragging through short touching and holding down the finger on the
        touchpad.
      * Middle and right button events on the upper and lower corner of the
        touchpad.
      * Vertical scrolling (button four and five events) through moving the
        finger on the right side of the touchpad.
      * The up/down button sends button four/five events.
      * Horizontal scrolling (button six and seven events) through moving the
        finger on the lower side of the touchpad.
      * The multi-buttons send button four/five events, and six/seven events for
        horizontal scrolling.
      * Adjustable finger detection.
        Multifinger taps: two finger for middle button and three finger for
        right button events. (Needs hardware support. Not all models implement
        this feature.)
      * Run-time configuration using shared memory. This means you can change
        parameter settings without restarting the X server.


pkgId: 18645a82b53b1892208387de1b1f710ed1b79ddf8d6e3888bb5d173602d1f003
name: xorg-x11-util-macros
arch: src
version: 1.19.0
epoch: 0
release: 3.el7
summary: X.Org X11 Autotools macros
url: http://www.x.org
rpm_license: MIT
rpm_group: Development/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xorg-x11-util-macros-1.19.0-3.el7.src.rpm
checksum_type: sha256
description:
  X.Org X11 autotools macros required for building the various packages that
  comprise the X Window System.


pkgId: 5eb2fbfb32523e7947d75d29943a2a1a96e9f17fb54d90c3755874b906a2a602
name: xpp3
arch: src
version: 1.1.3.8
epoch: 0
release: 11.el7
summary: XML Pull Parser
url: http://www.extreme.indiana.edu/xgws/xsoap/xpp/mxp1/index.html
rpm_license: ASL 1.1
rpm_group: Unspecified
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xpp3-1.1.3.8-11.el7.src.rpm
checksum_type: sha256
description:
  XML Pull Parser 3rd Edition (XPP3) MXP1 is an XmlPull
  parsing engine that is based on ideas from XPP and in
  particular XPP2 but completely revised and rewritten to
  take best advantage of latest JIT JVMs such as Hotspot in JDK 1.4.


pkgId: dfd003d2da6703d50420d7f664bf8e9634271e013e2632376f84d29a19b1e1e5
name: xrestop
arch: src
version: 0.4
epoch: 0
release: 14.el7
summary: X Resource Monitor
url: http://www.freedesktop.org/Software/xrestop
rpm_license: GPLv2+
rpm_group: Development/Tools
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xrestop-0.4-14.el7.src.rpm
checksum_type: sha256
description:
  A utility to monitor application usage of X resources in the X Server, and
  display them in a manner similar to 'top'.  This is a very useful utility
  for tracking down application X resource usage leaks.


pkgId: 945c39d291f4ed537558f9c1dc2f547ebaf4ba089a8625a8c28ca6d2bd340537
name: xsane
arch: src
version: 0.999
epoch: 0
release: 9.el7
summary: X Window System front-end for the SANE scanner interface
url: http://www.xsane.org/
rpm_license: GPLv2+
rpm_group: Applications/Multimedia
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xsane-0.999-9.el7.src.rpm
checksum_type: sha256
description:
  XSane is an X based interface for the SANE (Scanner Access Now Easy)
  library, which provides access to scanners, digital cameras, and other
  capture devices. XSane is written in GTK+ and provides control for
  performing the scan and then manipulating the captured image.


pkgId: 8669685147d792321709b8eb8a1c15c5f84c5ae84ef790ab4ad7f84ef7a92efb
name: xsettings-kde
arch: src
version: 0.12.3
epoch: 0
release: 7.el7
summary: XSettings Daemon for KDE
url: http://svnweb.mageia.org/soft/theme/xsettings-kde/
rpm_license: GPLv2+
rpm_group: User Interface/Desktops
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xsettings-kde-0.12.3-7.el7.src.rpm
checksum_type: sha256
description:
  This package provides a XSettings daemon for KDE Desktop Environment.
  It allows XSettings aware applications (all GTK+ 2 and GNOME 2 applications)
  to be informed instantly of changes in KDE configuration, such as theme name,
  default font and so on.


pkgId: 538d366d37e1c8f12f5a6f5309168a2fe47c75ff325373ac7b61482d5cb24a0e
name: xsom
arch: src
version: 0
epoch: 0
release: 10.20110809svn.el7
summary: XML Schema Object Model (XSOM)
url: http://xsom.java.net
rpm_license: CDDL or GPLv2 with exceptions
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xsom-0-10.20110809svn.el7.src.rpm
checksum_type: sha256
description:
  XML Schema Object Model (XSOM) is a Java library that allows applications to
  easily parse XML Schema documents and inspect information in them. It is
  expected to be useful for applications that need to take XML Schema as an
  input.  The library is a straight-forward implement of "schema components" as
  defined in the XML Schema spec part 1.  Refer to this specification of how this
  object model works.


pkgId: 4683d140355f7431eab4893e9bf18b57967d758b3210ff64e50a93a173f38da4
name: xstream
arch: src
version: 1.3.1
epoch: 0
release: 10.el7
summary: Java XML serialization library
url: http://xstream.codehaus.org/
rpm_license: BSD
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xstream-1.3.1-10.el7.src.rpm
checksum_type: sha256
description:
  XStream is a simple library to serialize objects to XML
  and back again. A high level facade is supplied that
  simplifies common use cases. Custom objects can be serialized
  without need for specifying mappings. Speed and low memory
  footprint are a crucial part of the design, making it suitable
  for large object graphs or systems with high message throughput.
  No information is duplicated that can be obtained via reflection.
  This results in XML that is easier to read for humans and more
  compact than native Java serialization. XStream serializes internal
  fields, including private and final. Supports non-public and inner
  classes. Classes are not required to have default constructor.
  Duplicate references encountered in the object-model will be
  maintained. Supports circular references. By implementing an
  interface, XStream can serialize directly to/from any tree
  structure (not just XML). Strategies can be registered allowing
  customization of how particular types are represented as XML.
  When an exception occurs due to malformed XML, detailed diagnostics
  are provided to help isolate and fix the problem.


pkgId: e94dbb870613397b913331a42d4080a2ff0bd99590d5a1ed85ba68fd099875c5
name: xterm
arch: src
version: 295
epoch: 0
release: 3.el7
summary: Terminal emulator for the X Window System
url: http://invisible-island.net/xterm
rpm_license: MIT
rpm_group: User Interface/X
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xterm-295-3.el7.src.rpm
checksum_type: sha256
description:
  The xterm program is a terminal emulator for the X Window System. It
  provides DEC VT102 and Tektronix 4014 compatible terminals for
  programs that can't use the window system directly.


pkgId: b22bcb7704abd9f96c093c1d3a716ab1b16d51d87dc8d45ca87914f0905c7935
name: xulrunner
arch: src
version: 31.6.0
epoch: 0
release: 2.el7_1
summary: XUL Runtime for Gecko Applications
url: http://developer.mozilla.org/En/XULRunner
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_group: Applications/Internet
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xulrunner-31.6.0-2.el7_1.src.rpm
checksum_type: sha256
description:
  XULRunner is a Mozilla runtime package that can be used to bootstrap XUL+XPCOM
  applications that are as rich as Firefox and Thunderbird. It provides mechanisms
  for installing, upgrading, and uninstalling these applications. XULRunner also
  provides libxul, a solution which allows the embedding of Mozilla technologies
  in other projects and products.


pkgId: c6e7c77a415a045783dfad6b1143e062630cdcdc4d9e9e85b057d9bca323a95c
name: xvattr
arch: src
version: 1.3
epoch: 0
release: 27.el7
summary: Utility for getting and setting Xv attributes
url: http://www.dtek.chalmers.se/groups/dvd/
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xvattr-1.3-27.el7.src.rpm
checksum_type: sha256
description:
  This program is used for getting and setting Xv attributes such as
  XV_BRIGHTNESS, XV_CONTRAST, XV_SATURATION, XV_HUE, XV_COLORKEY, ...


pkgId: b9d2dcb96b2c5b6d9101f2e3aa136e57f9b5e07c20bafa112e8b243288122135
name: xz
arch: src
version: 5.2.2
epoch: 0
release: 1.el7
summary: LZMA compression utilities
url: http://tukaani.org/xz/
rpm_license: LGPLv2+
rpm_group: Applications/File
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/xz-5.2.2-1.el7.src.rpm
checksum_type: sha256
description:
  XZ Utils are an attempt to make LZMA compression easy to use on free (as in
  freedom) operating systems. This is achieved by providing tools and libraries
  which are similar to use than the equivalents of the most popular existing
  compression algorithms.

  LZMA is a general purpose compression algorithm designed by Igor Pavlov as
  part of 7-Zip. It provides high compression ratio while keeping the
  decompression speed fast.


pkgId: 3693bd662f25cf3a6e84c048368da830da031ad812416c6debe0abfc27d896e3
name: xz-java
arch: src
version: 1.3
epoch: 0
release: 3.el7
summary: Java implementation of XZ data compression
url: http://tukaani.org/xz/java.html
rpm_license: Public Domain
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/xz-java-1.3-3.el7.src.rpm
checksum_type: sha256
description:
  A complete implementation of XZ data compression in Java.

  It features full support for the .xz file format specification version 1.0.4,
  single-threaded streamed compression and decompression, single-threaded
  decompression with limited random access support, raw streams (no .xz headers)
  for advanced users, including LZMA2 with preset dictionary.


pkgId: f441bd770e0964c4c34767e2b3df6ae1de4c9ab52bc1764ea71387413ec16db4
name: yajl
arch: src
version: 2.0.4
epoch: 0
release: 4.el7
summary: Yet Another JSON Library (YAJL)
url: http://lloyd.github.com/yajl/
rpm_license: ISC
rpm_group: Development/Libraries
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/yajl-2.0.4-4.el7.src.rpm
checksum_type: sha256
description:
  Yet Another JSON Library. YAJL is a small event-driven
  (SAX-style) JSON parser written in ANSI C, and a small
  validating JSON generator.


pkgId: 66590a61d1caa54835e7f2e432c8c4eed0874d98b10612e8ae5383919ce7ee82
name: yelp
arch: src
version: 3.14.2
epoch: 1
release: 1.el7
summary: Help browser for the GNOME desktop
url: http://live.gnome.org/Yelp
rpm_license: GPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/yelp-3.14.2-1.el7.src.rpm
checksum_type: sha256
description:
  Yelp is the help browser for the GNOME desktop. It is designed
  to help you browse all the documentation on your system in
  one central tool, including traditional man pages, info pages and
  documentation written in DocBook.


pkgId: f0ea873ecd5c54296fb5a5fa73580e0213778987f45ebcce6495f7ff51779e65
name: yelp-tools
arch: src
version: 3.14.1
epoch: 0
release: 1.el7
summary: Create, manage, and publish documentation for Yelp
url: https://wiki.gnome.org/Apps/Yelp/Tools
rpm_license: GPLv2+
rpm_group: Applications/Publishing
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/yelp-tools-3.14.1-1.el7.src.rpm
checksum_type: sha256
description:
  yelp-tools is a collection of scripts and build utilities to help create,
  manage, and publish documentation for Yelp and the web. Most of the heavy
  lifting is done by packages like yelp-xsl and itstool. This package just
  wraps things up in a developer-friendly way.


pkgId: 61e5876b6edc5f9a0c0a5e8c542647b99542892e0ac805be7684ee4dedf65774
name: yp-tools
arch: src
version: 2.14
epoch: 0
release: 3.el7
summary: NIS (or YP) client programs
url: http://www.linux-nis.org/nis/yp-tools/index.html
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/yp-tools-2.14-3.el7.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system which provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network.  NIS can enable
  users to login on any machine on the network, as long as the machine
  has the NIS client programs running and the user's password is
  recorded in the NIS passwd database.  NIS was formerly known as Sun
  Yellow Pages (YP).

  This package's NIS implementation is based on FreeBSD's YP and is a
  special port for glibc 2.x and libc versions 5.4.21 and later.  This
  package only provides the NIS client programs.  In order to use the
  clients, you'll need to already have an NIS server running on your
  network. An NIS server is provided in the ypserv package.

  Install the yp-tools package if you need NIS client programs for machines
  on your network.  You will also need to install the ypbind package on
  every machine running NIS client programs.  If you need an NIS server,
  you'll need to install the ypserv package on one machine on the network.


pkgId: c734e5e0ed49070f3cfe114ede4521ff7256cabd1f6df3bb25914a9d644acf50
name: ypbind
arch: src
version: 1.37.1
epoch: 3
release: 7.el7
summary: The NIS daemon which binds NIS clients to an NIS domain
url: http://www.linux-nis.org/nis/ypbind-mt/index.html
rpm_license: GPLv2
rpm_group: System Environment/Daemons
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/ypbind-1.37.1-7.el7.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the ypbind daemon. The ypbind daemon binds NIS
  clients to an NIS domain. Ypbind must be running on any machines
  running NIS client programs.

  Install the ypbind package on any machines running NIS client programs
  (included in the yp-tools package). If you need an NIS server, you
  also need to install the ypserv package to a machine on your network.


pkgId: c22587ba981752a0cb8966d14d1d693034e89f14c541905c63406b5a3423c53d
name: ypserv
arch: src
version: 2.31
epoch: 0
release: 8.el7
summary: The NIS (Network Information Service) server
url: http://www.linux-nis.org/nis/ypserv/index.html
rpm_license: GPLv2
rpm_group: System Environment/Daemons
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/ypserv-2.31-8.el7.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the NIS server, which will need to be running on
  your network. NIS clients do not need to be running the server.

  Install ypserv if you need an NIS server for your network. You also
  need to install the yp-tools and ypbind packages on any NIS client
  machines.


pkgId: cea1ee0f214aca66f2061d801640f45a64cbd00069159342495968f316542d5a
name: yum
arch: src
version: 3.4.3
epoch: 0
release: 150.el7
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/yum-3.4.3-150.el7.src.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: f044443452e5afcd98100dcd3de3129bbf4a7b9be24bbb968aac4763120f5dba
name: yum-langpacks
arch: src
version: 0.4.2
epoch: 0
release: 7.el7
summary: Langpacks plugin for yum
url: https://fedorahosted.org/yum-langpacks/
rpm_license: GPLv2+
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/yum-langpacks-0.4.2-7.el7.src.rpm
checksum_type: sha256
description:
  Yum-langpacks is a plugin for YUM that looks for langpacks for your native
  language for packages you install.


pkgId: ff43c5cbcccb8e7f4a4c47dd431607e794137b8d45834e4fdde6b19efa7666ff
name: yum-utils
arch: src
version: 1.1.31
epoch: 0
release: 40.el7
summary: Utilities based around the yum package manager
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_group: Development/Tools
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/yum-utils-1.1.31-40.el7.src.rpm
checksum_type: sha256
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install,
  find-repos-of-install, needs-restarting, package-cleanup, repoclosure,
  repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, show-installed, show-changed-rco, verifytree, yumdownloader,
  yum-builddep, yum-complete-transaction, yum-config-manager, yum-debug-dump,
  yum-debug-restore and yum-groups-manager.


pkgId: e6d5411863ac236e528921236f8581590d519c8d73664f400f8cfd20d374e379
name: zenity
arch: src
version: 3.8.0
epoch: 0
release: 5.el7
summary: Display dialog boxes from shell scripts
url: http://directory.fsf.org/zenity.html
rpm_license: LGPLv2+
rpm_group: Applications/System
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/zenity-3.8.0-5.el7.src.rpm
checksum_type: sha256
description:
  Zenity lets you display Gtk+ dialog boxes from the command line and through
  shell scripts. It is similar to gdialog, but is intended to be saner. It comes
  from the same family as dialog, Xdialog, and cdialog.


pkgId: b593ed39fdfa3b47e44401cb2d3cb6a2ab90556bc4790477184bbc2d793e3d80
name: zip
arch: src
version: 3.0
epoch: 0
release: 11.el7
summary: A file compression and packaging utility compatible with PKZIP
url: http://www.info-zip.org/Zip.html
rpm_license: BSD
rpm_group: Applications/Archiving
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/zip-3.0-11.el7.src.rpm
checksum_type: sha256
description:
  The zip program is a compression and file packaging utility.  Zip is
  analogous to a combination of the UNIX tar and compress commands and
  is compatible with PKZIP (a compression and file packaging utility for
  MS-DOS systems).

  Install the zip package if you need to compress files using the zip
  program.


pkgId: 4e6fa19ceeae622835f52ee111253a2433cefe0cc910ea1e9b82f5065fe3c68b
name: zlib
arch: src
version: 1.2.7
epoch: 0
release: 17.el7
summary: The compression and decompression library
url: http://www.zlib.net/
rpm_license: zlib and Boost
rpm_group: System Environment/Libraries
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/zlib-1.2.7-17.el7.src.rpm
checksum_type: sha256
description:
  Zlib is a general-purpose, patent-free, lossless data compression
  library which is used by many different programs.


pkgId: 60195592f7fc2acac3749ae6f8033ffe3de333f263a10956c8bd85e416b79ace
name: zsh
arch: src
version: 5.0.2
epoch: 0
release: 25.el7
summary: Powerful interactive shell
url: http://zsh.sourceforge.net/
rpm_license: MIT
rpm_group: System Environment/Shells
rpm_buildhost: cutlass.springdale.princeton.edu
location_href: Packages/zsh-5.0.2-25.el7.src.rpm
checksum_type: sha256
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.


pkgId: 2fdcc73acbf17f3b3972c44a26452f750557e6d6eec59b46e80894f1ada55403
name: zziplib
arch: src
version: 0.13.62
epoch: 0
release: 5.el7
summary: Lightweight library to easily extract data from zip files
url: http://zziplib.sourceforge.net/
rpm_license: LGPLv2+ or MPLv1.1
rpm_group: Applications/Archiving
rpm_buildhost: polo.springdale.princeton.edu
location_href: Packages/zziplib-0.13.62-5.el7.src.rpm
checksum_type: sha256
description:
  The zziplib library is intentionally lightweight, it offers the ability to
  easily extract data from files archived in a single zip file. Applications
  can bundle files into a single zip archive and access them. The implementation
  is based only on the (free) subset of compression with the zlib algorithm
  which is actually used by the zip/unzip tools.


