Scientific Linux Fermi 5.8 x86_64 June 11, 2012 --------------------------------------------------------------------------- Please enter bug reports at http://slfbugs.fnal.gov. Use your Services login/password. Items marked with a "*" have changed since SLF 5.7. Items marked with a "**" have changed since the last testing release. Please read the Release Notes for Scientific Linux. It is located at SL.releasenote Also read the Upstream Vendor release notes . They are located in Upstream.vendor.releasenote All of the info in the SL.releasenote is valid unless this document states otherwise. This document only contains info that is specific to the Fermi site. Any reference to SL.releasenote is done to emphasis that it contains important information. ---------------------------------------------------------------------------- This is based on the rebuilding of RPMS out of SRPMS's that form Scientific Linux. Please read this entire document before installing. Table of contents INSTALLATION INFO ADDED compared to Scientific Linux 5.8 UPDATED compared to Scientific Linux 5.8 Installer modifications /contrib /docs /notsupported MISC Notes HARDWARE SPECIFIC ISSUES SOFTWARE ISSUES/BUGS SUPPORT INFO vendor ERRATA Each has a "---" line above and below it. _____________________________________________________________________________ INSTALLATION INFO _____________________________________________________________________________ Installation Locations Via NETWORK: nfs: linux.fnal.gov:/export/linux/slf58/x86_64/ ftp: linux.fnal.gov/linux/slf58/x86_64 http: linux1.fnal.gov/linux/slf58/x86_64 And our easy to remember location ftp://linux.fnal.gov/downloads/slf58/ Network install with CDROM There is a boot.iso which is small iso image which includes all the drivers. After download you can use cdrecord to create a cdr with this image on it. ftp://linux.fnal.gov/download/slf58/network.install.x86_64/boot.iso Install via DVD image Download and then burn the dvd iso image from ftp://linux.fnal.gov/download/slf58/dvd.install.x86_64/ Install via CD images Download and then burn the cd iso images from ftp://linux.fnal.gov/download/slf58/cd.install.x86_64/ Installing a Xen Paravirtualized Guest When installing a Xen Paravirtualized Guest, the location is http://linux1.fnal.gov/linux/slf58/x86_64/sites/Fermi ----------------------------------------------------------------------------- ADDED compared to Scientific Linux 58 ----------------------------------------------------------------------------- **Fermi-release **Fermi-release-notes ** Fermi-release-5.8-1.slf.x86_64.rpm ** Fermi-release-notes-5.8-1.noarch.rpm Made change so that /etc/redhat-release, /etc/issue and /etc/issue.net show Scientific Linux Fermi instead of just Scientific Linux. fermi-timecard-2.0-2.noarch.rpm Provides "configuration" for firefox to use Fermi FTL on linux. Clam Anti Virus Clam Anti-Virus. Obtained from the DAG repository and rebuilt from src.rpm. http://www.clamav.net perl packages were added so that clamtk would work * Updated to a more current version * clamav-0.97.3-3.el5.x86_64.rpm * clamav-db-0.97.3-3.el5.x86_64.rpm * clamav-devel-0.97.3-3.el5.x86_64.rpm * clamav-milter-0.97.3-3.el5.x86_64.rpm * clamav-unofficial-sigs-3.7.1-6.el5.noarch.rpm * clamd-0.97.3-3.el5.x86_64.rpm clamtk-3.09-1.rf.x86_64.rpm perl-Config-Tiny-2.12-1.rf.noarch.rpm perl-ExtUtils-Depends-0.301-1.rf.noarch.rpm perl-ExtUtils-PkgConfig-1.11-1.rf.noarch.rpm perl-File-Find-Rule-0.30-1.rf.noarch.rpm perl-gettext-1.05-1.rf.x86_64.rpm perl-Glib-1.200-1.rf.x86_64.rpm perl-Gtk2-1.183-1.rf.x86_64.rpm perl-Number-Compare-0.01-1.2.rf.noarch.rpm perl-Text-Glob-0.08-1.rf.noarch.rpm drbd DRBD mirrors a block device over the network to another machine. Think of it as networked raid 1. It is a building block for setting up high availability (HA) clusters. drbd-8.3.7-3.sl.x86_64.rpm drbd-bash-completion-8.3.7-3.sl.x86_64.rpm drbd-heartbeat-8.3.7-3.sl.x86_64.rpm drbd-pacemaker-8.3.7-3.sl.x86_64.rpm drbd-udev-8.3.7-3.sl.x86_64.rpm drbd-utils-8.3.7-3.sl.x86_64.rpm drbd-xen-8.3.7-3.sl.x86_64.rpm * Updated to match current kernel * kernel-module-drbd-2.6.18-308.4.1.el5-8.3.7-1.sl5.x86_64.rpm * kernel-module-drbd-2.6.18-308.4.1.el5xen-8.3.7-1.sl5.x86_64.rpm * Added for dependency resolution * bash-completion-1.3-5 * libpacemaker3-1.0.1-6.2.sl5 * libpacemaker-devel-1.0.1-6.2.sl5 * pacemaker-1.0.1-6.2.sl5 flpr Installed by default. This does NOT require ups/upd. The flpr binary will reside in /usr/local/bin/ flpr-2.4-4f.9x.i386.rpm heartbeat heartbeat is a basic high-availability subsystem for Linux-HA. It will run scripts at initialization, and when machines go up or down. This version will also perform IP address takeover using gratuitous ARPs. It supports "n-node" clusters with significant capabilities for managing resources and dependencies. * Updated to a more current version * heartbeat-2.99.2-6.1.sl5 * heartbeat-common-2.99.2-6.1.sl5 * heartbeat-devel-2.99.2-6.1.sl5 * heartbeat-ldirectord-2.99.2-6.1.sl5 * heartbeat-resources-2.99.2-6.1.sl5 * libheartbeat2-2.99.2-6.1.sl5 * libheartbeat-devel-2.99.2-6.1.sl5 * libnet-1.1.5-1.el5 * libnet-devel-1.1.5-1.el5 Kerberos We have updated the kx509 and get-cert to be able to use the newer certificate servers * Updated to current version ** Added code changes that were made to MAC Lion version for ** compatibility reasons krb5-fermi-addons-1.1-1.i386.rpm ** krb5-fermi-getcert-2.0-2.i386.rpm * krb5-fermi-config-4.4-2.noarch.rpm * krb5-fermi-krb5.conf-4.4-2.noarch.rpm * krb5-fermi-base-2.1-14.noarch.rpm Patched to fix kshd hang problem. * Updated to current version * krb5-devel-1.6.1-70.slf5.i386.rpm * krb5-devel-1.6.1-70.slf5.x86_64.rpm * krb5-libs-1.6.1-70.slf5.i386.rpm * krb5-libs-1.6.1-70.slf5.x86_64.rpm * krb5-server-1.6.1-70.slf5.x86_64.rpm * krb5-server-ldap-1.6.1-70.slf5.x86_64.rpm * krb5-workstation-1.6.1-70.slf5.x86_64.rpm OpenAFS See SL.releasenote Here is the procedure for installing openafs, using yum yum install openafs-client kernel-module-openafs-`uname -r` yum install openafs-krb5 openafs-thiscell openafs-thiscell-FNAL now changes CellAlias so that /afs/fnal is really /afs/fnal.gov openafs-thiscell-FNAL-6.noarch.rpm redhat-logos-4.9.16-1.SLF.4.noarch.rpm This version of redhat-logo's has all of the generic changes that were made with Scientific Linux as well as changes to make it look like SLF. rrdtool Round Robin Database Tool to store and display time-series data rrdtool-1.3.9-2.sl5.i386.rpm rrdtool-1.3.9-2.sl5.x86_64.rpm rrdtool-devel-1.3.9-2.sl5.i386.rpm rrdtool-devel-1.3.9-2.sl5.x86_64.rpm rrdtool-perl-1.3.9-2.sl5.x86_64.rpm rrdtool-python-1.3.9-2.sl5.x86_64.rpm rrdtool-ruby-1.3.9-2.sl5.x86_64.rpm rrdtool-tcl-1.3.9-2.sl5.x86_64.rpm SLIP Scientific Linux Inventory Project client * Name changed to be compatible with SLF6, installs asking * for the previous name (ocsinventory-client) will still * work as before on SLF5 * * Now has an /etc/sysconfig/ocsinventory-fermi for behavior control * Can enable "DEBUG mode" * ocsinventory-fermi-0.9.9-16.noarch.rpm upsupdbootstrap Not installed by default. Links from /usr/local/bin are NOT made anymore. upsupdbootstrap-5.0-0.i386.rpm upsupdbootstrap-fnal-5.0-0.i386.rpm conflicts with upsupdbootstrap-local Installs ups/upd to /fnal/ups upsupdbootstrap-local-5.0-0.i386.rpm conflicts with upsupdbootstrap-fnal Installs ups/upd to /local/ups **yum-conf Modified to give Fermi's rpm's a priority, as well as point to Fermi's linux distribution servers instead of scientific linux's. ** yum-conf-58-2.slf.noarch.rpm ** Points to slf58 yum-conf-5x Will keep you at 5x which is the current stable 5x release. So when we release the next 5 release yum will automatically yum install it except for the kernel. yum-conf-5x-2-5.SLF.noarch.rpm yum-conf-fermi-internal Adds the fermi-internal yum repository yum-conf-fermi-internal-5-1.noarch.rpm *yum-autoupdate-1-2.SLF.noarch.rpm yum-autoupdate has the nightly yum cron job in it. The nightly cron job has been modified to check the add-ons directory. * Added /etc/yum.d/yum.cron.updateexec for configuring PRERUN and POSTRUN * You can now trigger events before or after yum-autoupdate like in SLF6 zz_auto_update_kernel-1.0-1.noarch.rpm Remove the exclude of the kernel from the nightly autoyum thus allowing the kernel to be upgraded via the nightly yum. Note that this does not check if you have custom kernel modules or a custom kernel installed. You have to ensure that this will work in your environment. You will have to reboot after the kernel is upgraded. The rpm does NOT reboot the system. Watch root email for notification of all nightly auto yum updates. zz_dhcp_resolv-3.0.5-1.noarch.rpm This rpm fixes that so that when your network starts, as it checks your resolv.conf, if you have dhcp.fnal.gov, but not fnal.gov it will put it in, so that you will have "search fnal.gov dhcp.fnal.gov" in your /etc/resolv.conf file. Does not work with NetworkManager zz_disable_avahi-1.0-0.5.noarch.rpm This will turn off and disable the avahi daemons zz_lang_collate-1.0-4.noarch.rpm Changes LANG so that sorting is done the same as 6.1 and earlier. (ABCabc instead of AaBbCc). Can speed up programs that sort. *zz_local_dns_cache-3.0-3.noarch.rpm This rpm will change your machine to use a local dns cache before looking for the standard dns servers * Updated to notice nscd and restart it as needed zz_logwatch_df-1.1-2.noarch.rpm By default logwatch does a df -h when looking at disk usage. This can be unwanted if you have alot of NFS mounted disks. This rpm changes that command to be df -lP -h, which looks at local disks only, and the output is in the POSIX output format. zz_ntp_configure-4.2.0-9.noarch.rpm Configure ntp for Fermi site network. Startup script now pokes hole in the firewall for itself One can manually change the script by editing the file /etc/sysconfig/ntpd.fermi *zz_pine_user_domain-1.0-3.noarch.rpm By default when a user sends mail from pine their email address is myname@mycomputer.fnal.gov. This rpm changes it so that the default is myname@fnal.gov by modifying the /etc/alpine/pine.conf config file. * Updated for alpine compatibility zz_screenlock_kde Enables screen lock with "blanking" screen saver so power saving monitors will go into sleep mode. Ensures that the Timeout value is 15 minutes or less. Preserves existing values if they are less than required minimum value. Installed by default if KDE is installed. zz_sendmail_fermi_gateway-2.1-2.noarch.rpm *zz_postfix_fermi_gateway-1.1-2.noarch.rpm This rpm is designed to configure sending outbound e-mail through the fermilab e-mail gateway(smtp.fnal.gov). zz_tcp_wrappers_change-3.0-3.noarch.rpm Disable all offsite access to common network services. Also puts in the "DOE required login banners". If it determines that you have already modified /etc/hosts.allow or host.deny it leaves them alone. Change to add perl to requires as %post uses perl zz_tex_tweaks-1.0-1.noarch.rpm Changes the default paper size to 8.5 x 11 vs A3 zz_use_clogger-1.0-1.noarch.rpm Change /etc/syslog.conf to log to clogger.fnal.gov Kickstart additions: The following groups have been added to the comps.xml for SLF5 * - fermi / misc-slf - clamav - drbd-group - heartbeat-group - local-printer - openafs-client - openssh-server - rrdtool-group - upsupdbootstrap --------------------------------------------------------------------------- UPDATED compared to Scientific Linux 58 ---------------------------------------------------------------------------- OpenSSH This is the openssh from S.L. 5.x with some patches and modifications. The client does kerberos with both fermi's old openssh(old gssapi), as well as generic new openssh's(new gssapi) The server only does the kerberos with the newer versions of openssh It does 'kerberos only' by default It does not do cryptocard; cryptocard is enabled by pam_krb5. openssh-server is not installed by default. added Mark Mengel's GSS_HOSTNAME patch * Updated to current version * openssh-4.3p2-82.el5.slf.x86_64.rpm * openssh-askpass-4.3p2-82.el5.slf.x86_64.rpm * openssh-clients-4.3p2-82.el5.slf.x86_64.rpm * openssh-server-4.3p2-82.el5.slf.x86_64.rpm pam_krb5 This is a modified version of the pam_krb5 that comes with SL5. This pam module has the ability to do cryptocard authentication. pam_krb5-2.2.11-6.slf5 ---------------------------------------------------------------------------- Installer modifications --------------------------------------------------------------------------- Anaconda (installer) Changes to "defaults" from vendor installer. Firewall is on by default. The zz_ntp_configure-4.2.0-6 rpm pokes a hole for inbound ntp. US/Central is default timezone. vendor default was New York. Kerberos is on by default with a realm of FNAL.GOV . vendor default was off. Default install is via http. If one wishes to use nfs then type nfs at the isolinux prompt. If one wshes to use ftp then type ftp at the isolinux prompt. Support for "sites" was added. Support for workgroups was added Workgroup maintainers can now check their workgroups in an out of cvs Fixed the kernel-module bug that was in SLF 5.0 --------------------------------------------------------------------------- /contrib/ --------------------------------------------------------------------------- The packages in this section have been contributed by various people. They are presented AS IS and there is no guarantee of them working. These packages are NOT supported by us. They will only get security updates if the contributor provides them. If you have questions about them then ask the contributor. To use with yum: For one time only (prefered method) yum --enablerepo=Fermi-contrib install To enable for all yum updates/install (including autoyum) edit the file /etc/yum.repos.d/fermi-contrib.repo and change the line enabled=0 to enabled=1 See README's in the RPMS/ directorys for specific package info. /sites/Fermi/contrib/RPMS/ --------------------------------------------------------------------------- KNOWN LIMITATIONS/BUGS --------------------------------------------------------------------------- The estimated time to install is not even close. After you have picked a workgroup on the workgroup selection page and moved to the next , you cannot go back to that page. The installer will die. --------------------------------------------------------------------------- MISC NOTES --------------------------------------------------------------------------- If you select "linux text" or you might want to type "linux text noipv6" because the install trys to do ipv6 and since there is no support at FNAL for ipv6 it takes a long time to timeout kickstart users might want to add the "noipv6" option to their ks.cfg file --------------------------------------------------------------------------- SUPPORT INFO --------------------------------------------------------------------------- Fermi site users should start with the "Fermi" specific support areas and use the Scientific Linux next. Scientific Linux Fermi web pages https://fermilinux.fnal.gov/ Fermi Linux Community support mailing list linux-users@fnal.gov Which is archived at http://listserv.fnal.gov/archives/linux-users.html Scientific Linux web page http://www.scientificlinux.org ---------------------------------------------------------------------------- ERRATA included which was released after SL 5.8 ---------------------------------------------------------------------------- * aide-0.13.1-6.el5_8.2.x86_64.rpm * autofs-5.0.1-0.rc2.164.el5_8.x86_64.rpm * cman-2.0.115-96.el5_8.3.x86_64.rpm * cman-devel-2.0.115-96.el5_8.3.i386.rpm * cman-devel-2.0.115-96.el5_8.3.x86_64.rpm * glibc-2.5-81.el5_8.2.i686.rpm * glibc-2.5-81.el5_8.2.x86_64.rpm * glibc-common-2.5-81.el5_8.2.x86_64.rpm * glibc-devel-2.5-81.el5_8.2.i386.rpm * glibc-devel-2.5-81.el5_8.2.x86_64.rpm * glibc-headers-2.5-81.el5_8.2.x86_64.rpm * glibc-utils-2.5-81.el5_8.2.x86_64.rpm * kernel-2.6.18-308.4.1.el5.x86_64.rpm * kernel-debug-2.6.18-308.4.1.el5.x86_64.rpm * kernel-debug-devel-2.6.18-308.4.1.el5.x86_64.rpm * kernel-devel-2.6.18-308.4.1.el5.x86_64.rpm * kernel-doc-2.6.18-308.4.1.el5.noarch.rpm * kernel-headers-2.6.18-308.4.1.el5.x86_64.rpm * kernel-module-aufs-2.6.18-308.4.1.el5-0.20090202.cvs-6.sl5.x86_64.rpm * kernel-module-aufs-2.6.18-308.4.1.el5xen-0.20090202.cvs-6.sl5.x86_64.rpm * kernel-module-drbd-2.6.18-308.4.1.el5-8.3.7-1.sl5.x86_64.rpm * kernel-module-drbd-2.6.18-308.4.1.el5xen-8.3.7-1.sl5.x86_64.rpm * kernel-module-ipw3945-2.6.18-308.4.1.el5-1.2.0-2.sl5.x86_64.rpm * kernel-module-ipw3945-2.6.18-308.4.1.el5xen-1.2.0-2.sl5.x86_64.rpm * kernel-module-ndiswrapper-2.6.18-308.4.1.el5-1.55-1.SL.x86_64.rpm * kernel-module-ndiswrapper-2.6.18-308.4.1.el5xen-1.55-1.SL.x86_64.rpm * kernel-module-openafs-2.6.18-308.4.1.el5-1.4.14-80.1.sl5.x86_64.rpm * kernel-module-openafs-2.6.18-308.4.1.el5xen-1.4.14-80.1.sl5.x86_64.rpm * kernel-xen-2.6.18-308.4.1.el5.x86_64.rpm * kernel-xen-devel-2.6.18-308.4.1.el5.x86_64.rpm * libgcrypt-1.4.4-5.el5_8.2.i386.rpm * libgcrypt-1.4.4-5.el5_8.2.x86_64.rpm * libgcrypt-devel-1.4.4-5.el5_8.2.i386.rpm * libgcrypt-devel-1.4.4-5.el5_8.2.x86_64.rpm * nscd-2.5-81.el5_8.2.x86_64.rpm * tomcat5-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-admin-webapps-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-common-lib-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-jasper-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-jasper-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-jsp-2.0-api-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-server-lib-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-servlet-2.4-api-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm * tomcat5-webapps-5.5.23-0jpp.31.el5_8.x86_64.rpm * xulrunner-10.0.3-2.el5_8.i386.rpm * xulrunner-10.0.3-2.el5_8.x86_64.rpm * xulrunner-devel-10.0.3-2.el5_8.i386.rpm * xulrunner-devel-10.0.3-2.el5_8.x86_64.rpm * firefox-10.0.4-1.el5_8.i386.rpm * firefox-10.0.4-1.el5_8.x86_64.rpm * libpng-1.2.10-17.el5_8.i386.rpm * libpng-1.2.10-17.el5_8.x86_64.rpm * libpng-devel-1.2.10-17.el5_8.i386.rpm * libpng-devel-1.2.10-17.el5_8.x86_64.rpm * openssl097a-0.9.7a-11.el5_8.2.i386.rpm * openssl097a-0.9.7a-11.el5_8.2.x86_64.rpm * openssl-0.9.8e-22.el5_8.3.i686.rpm * openssl-0.9.8e-22.el5_8.3.x86_64.rpm * openssl-devel-0.9.8e-22.el5_8.3.i386.rpm * openssl-devel-0.9.8e-22.el5_8.3.x86_64.rpm * openssl-perl-0.9.8e-22.el5_8.3.x86_64.rpm * thunderbird-10.0.4-1.el5_8.x86_64.rpm * cmirror-1.1.39-13.el5_8.1.1.x86_64.rpm * samba3x-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-client-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-common-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-doc-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-domainjoin-gui-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-swat-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-winbind-3.5.10-0.109.el5_8.i386.rpm * samba3x-winbind-3.5.10-0.109.el5_8.x86_64.rpm * samba3x-winbind-devel-3.5.10-0.109.el5_8.i386.rpm * samba3x-winbind-devel-3.5.10-0.109.el5_8.x86_64.rpm * libgcc-4.1.2-52.el5_8.1.i386.rpm * libgcj-4.1.2-52.el5_8.1.i386.rpm * libgcj-devel-4.1.2-52.el5_8.1.i386.rpm * libgfortran-4.1.2-52.el5_8.1.i386.rpm * libgnat-4.1.2-52.el5_8.1.i386.rpm * libmudflap-4.1.2-52.el5_8.1.i386.rpm * libmudflap-devel-4.1.2-52.el5_8.1.i386.rpm * libobjc-4.1.2-52.el5_8.1.i386.rpm * libstdc++-4.1.2-52.el5_8.1.i386.rpm * libstdc++-devel-4.1.2-52.el5_8.1.i386.rpm * openais-devel-0.80.6-36.el5_8.2.i386.rpm * perl-IO-Socket-SSL-1.01-2.el5.noarch.rpm * cc-eal4-config-rhel56-0.14-2.el5.noarch.rpm * cmirror-1.1.39-13.el5_8.2.1.x86_64.rpm * cpp-4.1.2-52.el5_8.1.x86_64.rpm * gcc-4.1.2-52.el5_8.1.x86_64.rpm * gcc-c++-4.1.2-52.el5_8.1.x86_64.rpm * gcc-gfortran-4.1.2-52.el5_8.1.x86_64.rpm * gcc-gnat-4.1.2-52.el5_8.1.x86_64.rpm * gcc-java-4.1.2-52.el5_8.1.x86_64.rpm * gcc-objc-4.1.2-52.el5_8.1.x86_64.rpm * gcc-objc++-4.1.2-52.el5_8.1.x86_64.rpm * libgcc-4.1.2-52.el5_8.1.x86_64.rpm * libgcj-4.1.2-52.el5_8.1.x86_64.rpm * libgcj-devel-4.1.2-52.el5_8.1.x86_64.rpm * libgcj-src-4.1.2-52.el5_8.1.x86_64.rpm * libgfortran-4.1.2-52.el5_8.1.x86_64.rpm * libgnat-4.1.2-52.el5_8.1.x86_64.rpm * libmudflap-4.1.2-52.el5_8.1.x86_64.rpm * libmudflap-devel-4.1.2-52.el5_8.1.x86_64.rpm * libobjc-4.1.2-52.el5_8.1.x86_64.rpm * libstdc++-4.1.2-52.el5_8.1.x86_64.rpm * libstdc++-devel-4.1.2-52.el5_8.1.x86_64.rpm * openais-0.80.6-36.el5_8.2.x86_64.rpm * openais-devel-0.80.6-36.el5_8.2.x86_64.rpm * wget-1.11.4-3.el5_8.2.x86_64.rpm * dkms-2.2.0.3-1.el5.noarch.rpm * ImageMagick-6.2.8.0-15.el5_8.i386.rpm * ImageMagick-6.2.8.0-15.el5_8.x86_64.rpm * ImageMagick-c++-6.2.8.0-15.el5_8.i386.rpm * ImageMagick-c++-6.2.8.0-15.el5_8.x86_64.rpm * ImageMagick-c++-devel-6.2.8.0-15.el5_8.i386.rpm * ImageMagick-c++-devel-6.2.8.0-15.el5_8.x86_64.rpm * ImageMagick-devel-6.2.8.0-15.el5_8.i386.rpm * ImageMagick-devel-6.2.8.0-15.el5_8.x86_64.rpm * ImageMagick-perl-6.2.8.0-15.el5_8.x86_64.rpm * php-5.1.6-34.el5_8.x86_64.rpm * php53-5.3.3-7.el5_8.x86_64.rpm * php53-bcmath-5.3.3-7.el5_8.x86_64.rpm * php53-cli-5.3.3-7.el5_8.x86_64.rpm * php53-common-5.3.3-7.el5_8.x86_64.rpm * php53-dba-5.3.3-7.el5_8.x86_64.rpm * php53-devel-5.3.3-7.el5_8.x86_64.rpm * php53-gd-5.3.3-7.el5_8.x86_64.rpm * php53-imap-5.3.3-7.el5_8.x86_64.rpm * php53-intl-5.3.3-7.el5_8.x86_64.rpm * php53-ldap-5.3.3-7.el5_8.x86_64.rpm * php53-mbstring-5.3.3-7.el5_8.x86_64.rpm * php53-mysql-5.3.3-7.el5_8.x86_64.rpm * php53-odbc-5.3.3-7.el5_8.x86_64.rpm * php53-pdo-5.3.3-7.el5_8.x86_64.rpm * php53-pgsql-5.3.3-7.el5_8.x86_64.rpm * php53-process-5.3.3-7.el5_8.x86_64.rpm * php53-pspell-5.3.3-7.el5_8.x86_64.rpm * php53-snmp-5.3.3-7.el5_8.x86_64.rpm * php53-soap-5.3.3-7.el5_8.x86_64.rpm * php53-xml-5.3.3-7.el5_8.x86_64.rpm * php53-xmlrpc-5.3.3-7.el5_8.x86_64.rpm * php-bcmath-5.1.6-34.el5_8.x86_64.rpm * php-cli-5.1.6-34.el5_8.x86_64.rpm * php-common-5.1.6-34.el5_8.x86_64.rpm * php-dba-5.1.6-34.el5_8.x86_64.rpm * php-devel-5.1.6-34.el5_8.x86_64.rpm * php-gd-5.1.6-34.el5_8.x86_64.rpm * php-imap-5.1.6-34.el5_8.x86_64.rpm * php-ldap-5.1.6-34.el5_8.x86_64.rpm * php-mbstring-5.1.6-34.el5_8.x86_64.rpm * php-mysql-5.1.6-34.el5_8.x86_64.rpm * php-ncurses-5.1.6-34.el5_8.x86_64.rpm * php-odbc-5.1.6-34.el5_8.x86_64.rpm * php-pdo-5.1.6-34.el5_8.x86_64.rpm * php-pgsql-5.1.6-34.el5_8.x86_64.rpm * php-snmp-5.1.6-34.el5_8.x86_64.rpm * php-soap-5.1.6-34.el5_8.x86_64.rpm * php-xml-5.1.6-34.el5_8.x86_64.rpm * php-xmlrpc-5.1.6-34.el5_8.x86_64.rpm * kmod-kvm-83-249.el5_8.4.x86_64.rpm * kmod-kvm-debug-83-249.el5_8.4.x86_64.rpm * kvm-83-249.el5_8.4.x86_64.rpm * kvm-qemu-img-83-249.el5_8.4.x86_64.rpm * kvm-tools-83-249.el5_8.4.x86_64.rpm * postgresql-8.1.23-4.el5_8.x86_64.rpm * postgresql84-8.4.11-1.el5_8.x86_64.rpm * postgresql84-contrib-8.4.11-1.el5_8.x86_64.rpm * postgresql84-devel-8.4.11-1.el5_8.i386.rpm * postgresql84-devel-8.4.11-1.el5_8.x86_64.rpm * postgresql84-docs-8.4.11-1.el5_8.x86_64.rpm * postgresql84-libs-8.4.11-1.el5_8.i386.rpm * postgresql84-libs-8.4.11-1.el5_8.x86_64.rpm * postgresql84-plperl-8.4.11-1.el5_8.x86_64.rpm * postgresql84-plpython-8.4.11-1.el5_8.x86_64.rpm * postgresql84-pltcl-8.4.11-1.el5_8.x86_64.rpm * postgresql84-python-8.4.11-1.el5_8.x86_64.rpm * postgresql84-server-8.4.11-1.el5_8.x86_64.rpm * postgresql84-tcl-8.4.11-1.el5_8.x86_64.rpm * postgresql84-test-8.4.11-1.el5_8.x86_64.rpm * postgresql-contrib-8.1.23-4.el5_8.x86_64.rpm * postgresql-devel-8.1.23-4.el5_8.i386.rpm * postgresql-devel-8.1.23-4.el5_8.x86_64.rpm * postgresql-docs-8.1.23-4.el5_8.x86_64.rpm * postgresql-libs-8.1.23-4.el5_8.i386.rpm * postgresql-libs-8.1.23-4.el5_8.x86_64.rpm * postgresql-pl-8.1.23-4.el5_8.x86_64.rpm * postgresql-python-8.1.23-4.el5_8.x86_64.rpm * postgresql-server-8.1.23-4.el5_8.x86_64.rpm * postgresql-tcl-8.1.23-4.el5_8.x86_64.rpm * postgresql-test-8.1.23-4.el5_8.x86_64.rpm * aspell-en-6.0-3.x86_64.rpm * binutils-2.17.50.0.6-20.el5_8.3.x86_64.rpm * binutils-devel-2.17.50.0.6-20.el5_8.3.i386.rpm * binutils-devel-2.17.50.0.6-20.el5_8.3.x86_64.rpm * gdbm-1.8.0-28.el5.i386.rpm * gdbm-1.8.0-28.el5.x86_64.rpm * gdbm-devel-1.8.0-28.el5.i386.rpm * gdbm-devel-1.8.0-28.el5.x86_64.rpm * ipa-client-2.1.3-2.el5_8.x86_64.rpm * mod_dav_svn-1.6.11-10.el5_8.x86_64.rpm * net-snmp-5.3.2.2-17.el5_8.1.x86_64.rpm * net-snmp-devel-5.3.2.2-17.el5_8.1.i386.rpm * net-snmp-devel-5.3.2.2-17.el5_8.1.x86_64.rpm * net-snmp-libs-5.3.2.2-17.el5_8.1.i386.rpm * net-snmp-libs-5.3.2.2-17.el5_8.1.x86_64.rpm * net-snmp-perl-5.3.2.2-17.el5_8.1.x86_64.rpm * net-snmp-utils-5.3.2.2-17.el5_8.1.x86_64.rpm * scim-bridge-0.4.5-11.el5.x86_64.rpm * scim-bridge-gtk-0.4.5-11.el5.i386.rpm * scim-bridge-gtk-0.4.5-11.el5.x86_64.rpm * subversion-1.6.11-10.el5_8.i386.rpm * subversion-1.6.11-10.el5_8.x86_64.rpm * subversion-devel-1.6.11-10.el5_8.i386.rpm * subversion-devel-1.6.11-10.el5_8.x86_64.rpm * subversion-javahl-1.6.11-10.el5_8.x86_64.rpm * subversion-perl-1.6.11-10.el5_8.x86_64.rpm * subversion-ruby-1.6.11-10.el5_8.x86_64.rpm * tar-1.15.1-32.el5_8.x86_64.rpm * tzdata-2012c-1.el5.x86_64.rpm * tzdata-java-2012c-1.el5.x86_64.rpm