patch-2.4.9 linux/include/asm-arm/arch-sa1100/freebird.h

• Lines: 70
• Date: Sun Aug 12 11:14:00 2001
• Orig file: v2.4.8/linux/include/asm-arm/arch-sa1100/freebird.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.8/linux/include/asm-arm/arch-sa1100/freebird.h linux/include/asm-arm/arch-sa1100/freebird.h
@@ -0,0 +1,69 @@
+/*
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+
+/* Board Control Register */
+
+#define BCR_BASE  0xf0000000
+#define BCR (*(volatile unsigned int *)(BCR_BASE))
+
+#define BCR_DB1110	(0x00A07410)
+
+
+#define BCR_FREEBIRD_AUDIO_PWR	(1<<0)	/* Audio Power (1 = on, 0 = off) */
+#define BCR_FREEBIRD_LCD_PWR		(1<<1)	/* LCD Power (1 = on) */
+#define BCR_FREEBIRD_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define BCR_FREEBIRD_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define BCR_FREEBIRD_IRDA_MD0	(1<<4)	/* Range/Power select */
+#define BCR_FREEBIRD_IRDA_MD1	(1<<5)	/* Range/Power select */
+#define BCR_FREEBIRD_LCD_DISP	(1<<7)	/* LCD display (1 = on, 0 = off */
+#define BCR_FREEBIRD_LCD_BACKLIGHT	(1<<16)	/* LCD backlight ,1=on */
+#define BCR_FREEBIRD_LCD_LIGHT_INC	(1<<17)	/* LCD backlight brightness */
+#define BCR_FREEBIRD_LCD_LIGHT_DU	(1<<18)	/* LCD backlight brightness */
+#define BCR_FREEBIRD_LCD_INC			(1<<19)	/* LCD contrast  */
+#define BCR_FREEBIRD_LCD_DU			(1<<20)	/* LCD contrast */
+#define BCR_FREEBIRD_QMUTE			(1<<21)	/* Quick Mute */
+#define BCR_FREEBIRD_ALARM_LED		(1<<22)	/* ALARM LED control */
+#define BCR_FREEBIRD_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
+
+#ifndef __ASSEMBLY__
+extern unsigned long BCR_value;
+#define BCR_set( x )	BCR = (BCR_value |= (x))
+#define BCR_clear( x )	BCR = (BCR_value &= ~(x))
+#endif
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define GPIO_FREEBIRD_NPOWER_BUTTON		GPIO_GPIO(0)
+#define GPIO_FREEBIRD_APP1_BUTTON		GPIO_GPIO(1)
+#define GPIO_FREEBIRD_APP2_BUTTON		GPIO_GPIO(2)
+#define GPIO_FREEBIRD_APP3_BUTTOM		GPIO_GPIO(3)
+#define GPIO_FREEBIRD_UCB1300			GPIO_GPIO(4)
+
+#define GPIO_FREEBIRD_EXPWR				GPIO_GPIO(8)
+#define GPIO_FREEBIRD_CHARGING			GPIO_GPIO(9)
+#define GPIO_FREEBIRD_RAMD				GPIO_GPIO(14)
+#define GPIO_FREEBIRD_L3_DATA			GPIO_GPIO(15)
+#define GPIO_FREEBIRD_L3_MODE			GPIO_GPIO(17)
+#define GPIO_FREEBIRD_L3_CLOCK			GPIO_GPIO(18)
+#define GPIO_FREEBIRD_STEREO_64FS_CLK	GPIO_GPIO(10)
+
+#define GPIO_FREEBIRD_CF_CD				GPIO_GPIO(22)
+#define GPIO_FREEBIRD_CF_IRQ			GPIO_GPIO(21)
+#define GPIO_FREEBIRD_CF_BVD			GPIO_GPIO(25)
+
+#define IRQ_GPIO_FREEBIRD_NPOWER_BUTTON	IRQ_GPIO0
+#define IRQ_GPIO_FREEBIRD_APP1_BUTTON	IRQ_GPIO1
+#define IRQ_GPIO_FREEBIRD_APP2_BUTTON	IRQ_GPIO2
+#define IRQ_GPIO_FREEBIRD_APP3_BUTTON	IRQ_GPIO3
+#define IRQ_GPIO_FREEBIRD_UCB1300_IRQ	IRQ_GPIO4
+
+#define IRQ_GPIO_FREEBIRD_CF_IRQ		IRQ_GPIO21
+#define IRQ_GPIO_FREEBIRD_CF_CD			IRQ_GPIO22
+#define IRQ_GPIO_FREEBIRD_CF_BVD		IRQ_GPIO25
+