patch-2.4.9 linux/arch/arm/mach-sa1100/lart.c

• Lines: 46
• Date: Sun Aug 12 17:36:24 2001
• Orig file: v2.4.8/linux/arch/arm/mach-sa1100/lart.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.8/linux/arch/arm/mach-sa1100/lart.c linux/arch/arm/mach-sa1100/lart.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-sa1100/lart.c
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include "generic.h"
+
+
+static struct map_desc lart_io_desc[] __initdata = {
+ /* virtual     physical    length      domain     r  w  c  b */
+  { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash memory */
+  { 0xec000000, 0x08000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash, alternative location */
+  LAST_DESC
+};
+
+static void __init lart_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(lart_io_desc);
+
+	sa1100_register_uart(0, 3);
+	sa1100_register_uart(1, 1);
+	sa1100_register_uart(2, 2);
+	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+	GPDR |= GPIO_UART_TXD;
+	GPDR &= ~GPIO_UART_RXD;
+	PPAR |= PPAR_UPR;
+}
+
+MACHINE_START(LART, "LART")
+	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+	BOOT_PARAMS(0xc0000100)
+	MAPIO(lart_map_io)
+	INITIRQ(sa1100_init_irq)
+MACHINE_END