patch-2.4.9 linux/arch/arm/config.in
Next file: linux/arch/arm/def-configs/anakin
Previous file: linux/arch/arm/boot/compressed/ofw-shark.c
Back to the patch index
Back to the overall index
- Lines: 184
- Date:
Sun Aug 12 17:36:24 2001
- Orig file:
v2.4.8/linux/arch/arm/config.in
- Orig date:
Tue Jul 3 17:08:18 2001
diff -u --recursive --new-file v2.4.8/linux/arch/arm/config.in linux/arch/arm/config.in
@@ -31,17 +31,19 @@
mainmenu_option next_comment
comment 'System Type'
-choice 'ARM system type' \
- "Archimedes/A5000 CONFIG_ARCH_ARCA5K \
+choice 'ARM system type' \
+ "Anakin CONFIG_ARCH_ANAKIN \
+ Archimedes/A5000 CONFIG_ARCH_ARCA5K \
Cirrus-CL-PS7500FE CONFIG_ARCH_CLPS7500 \
+ CLPS711x/EP721x-based CONFIG_ARCH_CLPS711X \
Co-EBSA285 CONFIG_ARCH_CO285 \
EBSA-110 CONFIG_ARCH_EBSA110 \
- LinkUp-L7200 CONFIG_ARCH_L7200 \
FootBridge CONFIG_ARCH_FOOTBRIDGE \
Integrator CONFIG_ARCH_INTEGRATOR \
+ LinkUp-L7200 CONFIG_ARCH_L7200 \
RiscPC CONFIG_ARCH_RPC \
SA1100-based CONFIG_ARCH_SA1100 \
- CLPS711x/EP721x-based CONFIG_ARCH_CLPS711X" RiscPC
+ Shark CONFIG_ARCH_SHARK" RiscPC
mainmenu_option next_comment
comment 'Archimedes/A5000 Implementations'
@@ -68,20 +70,37 @@
dep_bool ' Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
dep_bool ' Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool ' CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
+if [ "$CONFIG_SA1100_CERF" = "y" ]; then
+ bool ' 32MB Cerf support' CONFIG_SA1100_CERF_32MB
+fi
dep_bool ' Compaq iPAQ H3600 (Bitsy)' CONFIG_SA1100_BITSY $CONFIG_ARCH_SA1100
#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
-#dep_bool ' Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
+dep_bool ' Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
+if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
+ bool ' Support 16 MB of DRAM (not just 8)' CONFIG_SA1100_EXTENEX1_16MB
+fi
+dep_bool ' FlexaNet' CONFIG_SA1100_FLEXANET $CONFIG_ARCH_SA1100
+dep_bool ' FreeBird-v1.1' CONFIG_SA1100_FREEBIRD $CONFIG_ARCH_SA1100
+dep_bool ' GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
+dep_bool ' HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
+dep_bool ' HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
+dep_bool ' Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
dep_bool ' LART' CONFIG_SA1100_LART $CONFIG_ARCH_SA1100
-#dep_bool ' PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
-dep_bool ' GraphicsClient' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool ' nanoEngine' CONFIG_SA1100_NANOENGINE $CONFIG_ARCH_SA1100
-dep_bool ' Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
+dep_bool ' OmniMeter' CONFIG_SA1100_OMNIMETER $CONFIG_ARCH_SA1100
+dep_bool ' Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
+dep_bool ' PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
dep_bool ' Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
+dep_bool ' Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
+dep_bool ' Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
+dep_bool ' Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool ' XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
-dep_bool ' Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
+dep_bool ' Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100
# Determine if SA1111 support is required
if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
+ "$CONFIG_SA1100_JORNADA720" = "y" -o \
+ "$CONFIG_SA1100_PFS168" = "y" -o \
"$CONFIG_SA1100_XP860" = "y" ]; then
define_bool CONFIG_SA1111 y
fi
@@ -148,7 +167,7 @@
"$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
- "$CONFIG_ARCH_L7200" = "y" ]; then
+ "$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" ]; then
define_bool CONFIG_CPU_32v4 y
else
define_bool CONFIG_CPU_32v4 n
@@ -219,7 +238,7 @@
# SA110
if [ "$CONFIG_ARCH_EBSA110" = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
- "$CONFIG_ARCH_NEXUSPCI" = "y" ]; then
+ "$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" ]; then
define_bool CONFIG_CPU_SA110 y
else
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
@@ -252,9 +271,6 @@
mainmenu_option next_comment
comment 'General setup'
-comment 'Please ensure that you have read the help on the next option'
-bool 'Load kernel using Angel Debug Monitor' CONFIG_ANGELBOOT
-
# Now handle the bus types
if [ "$CONFIG_ARCH_FTVPCI" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
@@ -272,7 +288,8 @@
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
- "$CONFIG_ARCH_EBSA110" = "y" ]; then
+ "$CONFIG_ARCH_EBSA110" = "y" -o \
+ "$CONFIG_ARCH_SA1100" = "y" ]; then
define_bool CONFIG_ISA y
else
define_bool CONFIG_ISA n
@@ -285,6 +302,11 @@
define_bool CONFIG_ISA_DMA n
fi
+if [ "$CONFIG_ARCH_SA1100" = "y" -o \
+ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
+ dep_bool 'Support CPU clock change (EXPERIMENTAL)' CONFIG_CPU_FREQ $CONFIG_EXPERIMENTAL
+fi
+
source drivers/pci/Config.in
bool 'Support hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
@@ -312,8 +334,8 @@
"$CONFIG_ARCH_CLPS7500" = "y" -o \
"$CONFIG_ARCH_PERSONAL_SERVER" = "y" -o \
"$CONFIG_ARCH_CATS" = "y" -o \
- "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
- "$CONFIG_ARCH_P720T" = "y" ]; then
+ "$CONFIG_ARCH_P720T" = "y" -o \
+ "$CONFIG_ARCH_ANAKIN" = "y" ]; then
string 'Default kernel command string' CONFIG_CMDLINE ""
fi
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
@@ -348,7 +370,11 @@
endmenu
source drivers/parport/Config.in
-source drivers/mtd/Config.in
+
+if [ "$CONFIG_ALIGNMENT_TRAP" = "y" ]; then
+ source drivers/mtd/Config.in
+fi
+
source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/md/Config.in
@@ -403,7 +429,7 @@
source drivers/ieee1394/Config.in
-source drivers/message/i2o/Config.in
+source drivers/i2o/Config.in
mainmenu_option next_comment
comment 'ISDN subsystem'
@@ -446,6 +472,9 @@
define_bool CONFIG_KMI_KEYB y
define_bool CONFIG_KMI_MOUSE y
fi
+ if [ "$CONFIG_ARCH_L7200" = "y" ]; then
+ define_bool CONFIG_L7200_KEYB y
+ fi
# Do we use the PC-type keyboard map?
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
@@ -454,13 +483,13 @@
"$CONFIG_ARCH_INTEGRATOR" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
- "$CONFIG_ARCH_P720T" = "y" ]; then
+ "$CONFIG_ARCH_P720T" = "y" -o \
+ "$CONFIG_ARCH_ANAKIN" = "y" ]; then
define_bool CONFIG_PC_KEYMAP y
fi
if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
bool 'VGA text console' CONFIG_VGA_CONSOLE
fi
- bool 'Support Frame buffer devices' CONFIG_FB
source drivers/video/Config.in
endmenu
fi
@@ -469,6 +498,7 @@
"$CONFIG_ARCH_CLPS7500" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
+ "$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_PCI" = "y" ]; then
mainmenu_option next_comment
comment 'Sound'
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)