patch-2.4.7 linux/drivers/isdn/hisax/elsa.c
Next file: linux/drivers/isdn/hisax/hfc_sx.c
Previous file: linux/drivers/isdn/hisax/config.c
Back to the patch index
Back to the overall index
- Lines: 110
- Date:
Wed Jul 18 09:45:40 2001
- Orig file:
v2.4.6/linux/drivers/isdn/hisax/elsa.c
- Orig date:
Fri Mar 2 11:12:08 2001
diff -u --recursive --new-file v2.4.6/linux/drivers/isdn/hisax/elsa.c linux/drivers/isdn/hisax/elsa.c
@@ -1,4 +1,4 @@
-/* $Id: elsa.c,v 2.26.6.3 2001/02/16 16:43:25 kai Exp $
+/* $Id: elsa.c,v 2.26.6.5 2001/07/18 16:25:12 kai Exp $
*
* elsa.c low level stuff for Elsa isdn cards
*
@@ -30,7 +30,7 @@
extern const char *CardType[];
-const char *Elsa_revision = "$Revision: 2.26.6.3 $";
+const char *Elsa_revision = "$Revision: 2.26.6.5 $";
const char *Elsa_Types[] =
{"None", "PC", "PCC-8", "PCC-16", "PCF", "PCF-Pro",
"PCMCIA", "QS 1000", "QS 3000", "Microlink PCI", "QS 3000 PCI",
@@ -590,13 +590,13 @@
if (cs->subtyp==ELSA_QS1000) {
cs->subtyp = ELSA_QS3000;
printk(KERN_INFO
- "Elsa: %s detected modem at 0x%x\n",
+ "Elsa: %s detected modem at 0x%lx\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base+8);
release_region(cs->hw.elsa.base, 8);
if (check_region(cs->hw.elsa.base, 16)) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
+ "HiSax: %s config port %lx-%lx already in use\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base + 8,
cs->hw.elsa.base + 16);
@@ -606,13 +606,13 @@
} else if (cs->subtyp==ELSA_PCC16) {
cs->subtyp = ELSA_PCF;
printk(KERN_INFO
- "Elsa: %s detected modem at 0x%x\n",
+ "Elsa: %s detected modem at 0x%lx\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base+8);
release_region(cs->hw.elsa.base, 8);
if (check_region(cs->hw.elsa.base, 16)) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
+ "HiSax: %s config port %lx-%lx already in use\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base + 8,
cs->hw.elsa.base + 16);
@@ -621,7 +621,7 @@
"elsa isdn modem");
} else
printk(KERN_INFO
- "Elsa: %s detected modem at 0x%x\n",
+ "Elsa: %s detected modem at 0x%lx\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base+8);
arcofi_fsm(cs, ARCOFI_START, &ARCOFI_XOP_0);
@@ -881,7 +881,7 @@
if (!(cs->subtyp = probe_elsa_adr(cs->hw.elsa.base,
cs->typ))) {
printk(KERN_WARNING
- "Elsa: no Elsa Microlink at 0x%x\n",
+ "Elsa: no Elsa Microlink at %#lx\n",
cs->hw.elsa.base);
return (0);
}
@@ -919,7 +919,7 @@
if ((cs->subtyp == ELSA_PCFPRO) && (val = 'G'))
val = 'C';
printk(KERN_INFO
- "Elsa: %s found at 0x%x Rev.:%c IRQ %d\n",
+ "Elsa: %s found at %#lx Rev.:%c IRQ %d\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base,
val, cs->irq);
@@ -946,7 +946,7 @@
cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER;
cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL;
printk(KERN_INFO
- "Elsa: %s defined at 0x%x IRQ %d\n",
+ "Elsa: %s defined at %#lx IRQ %d\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base,
cs->irq);
@@ -970,7 +970,7 @@
cs->hw.elsa.trig = 0;
cs->hw.elsa.ctrl = 0;
printk(KERN_INFO
- "Elsa: %s defined at 0x%x IRQ %d\n",
+ "Elsa: %s defined at %#lx IRQ %d\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base,
cs->irq);
@@ -1028,7 +1028,7 @@
cs->hw.elsa.trig = 0;
cs->irq_flags |= SA_SHIRQ;
printk(KERN_INFO
- "Elsa: %s defined at 0x%x/0x%x IRQ %d\n",
+ "Elsa: %s defined at %#lx/0x%x IRQ %d\n",
Elsa_Types[cs->subtyp],
cs->hw.elsa.base,
cs->hw.elsa.cfg,
@@ -1068,7 +1068,7 @@
here, it would fail. */
if (cs->typ != ISDN_CTYPE_ELSA_PCMCIA && check_region(cs->hw.elsa.base, bytecnt)) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
+ "HiSax: %s config port %#lx-%#lx already in use\n",
CardType[card->typ],
cs->hw.elsa.base,
cs->hw.elsa.base + bytecnt);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)