patch-2.4.5 linux/arch/ppc/kernel/apus_pci.c

• Lines: 190
• Date: Mon May 21 17:04:46 2001
• Orig file: v2.4.4/linux/arch/ppc/kernel/apus_pci.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.4/linux/arch/ppc/kernel/apus_pci.c linux/arch/ppc/kernel/apus_pci.c
@@ -0,0 +1,189 @@
+/*
+ * BK Id: SCCS/s.apus_pci.c 1.3 05/17/01 18:14:21 cort
+ */
+/*
+ * Copyright (C) Michel Dänzer <michdaen@iiic.ethz.ch>
+ *
+ * APUS PCI routines.
+ *
+ * Currently, only B/CVisionPPC cards (Permedia2) are supported.
+ *
+ * Thanks to Geert Uytterhoeven for the idea:
+ * Read values from given config space(s) for the first devices, -1 otherwise
+ *
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_AMIGA
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+
+#include <asm/init.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#include "apus_pci.h"
+
+
+/* These definitions are mostly adapted from pm2fb.c */
+
+#undef APUS_PCI_MASTER_DEBUG
+#ifdef APUS_PCI_MASTER_DEBUG
+#define DPRINTK(a,b...)	printk(KERN_DEBUG "apus_pci: %s: " a, __FUNCTION__ , ## b)
+#else
+#define DPRINTK(a,b...)
+#endif 
+
+/*
+ * The _DEFINITIVE_ memory mapping/unmapping functions.
+ * This is due to the fact that they're changing soooo often...
+ */
+#define DEFW()		wmb()
+#define DEFR()		rmb()
+#define DEFRW()		mb()
+
+#define DEVNO(d)	((d)>>3)
+#define FNNO(d)		((d)&7)
+
+
+extern unsigned long powerup_PCI_present;
+
+static struct pci_controller *apus_hose;
+
+
+__apus
+void *pci_io_base(unsigned int bus)
+{
+	return 0;
+}
+
+
+#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
+#define cfg_write(val, addr, type, op)	op((val), (type *)(addr)); DEFW()
+#define cfg_read_bad	*val = ~0;
+#define cfg_write_bad	;
+#define cfg_read_val(val)	*val
+#define cfg_write_val(val)	val
+
+#define APUS_PCI_OP(rw, size, type, op, mask)					\
+__apus int									\
+apus_pcibios_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{										\
+	int fnno = FNNO(dev->devfn);						\
+	int devno = DEVNO(dev->devfn);						\
+										\
+	if (dev->bus->number > 0 || devno != 1) {				\
+		cfg_##rw##_bad;							\
+		return PCIBIOS_DEVICE_NOT_FOUND;				\
+	}									\
+	/* base address + function offset + offset ^ endianness conversion */	\
+	cfg_##rw(val, apus_hose->cfg_data + (fnno<<5) + (offset ^ mask),	\
+		 type, op);							\
+										\
+	DPRINTK(#op " b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, v: 0x%x\n",		\
+		dev->bus->number, dev->devfn>>3, dev->devfn&7,			\
+		offset, cfg_##rw##_val(val));					\
+	return PCIBIOS_SUCCESSFUL;						\
+}
+
+APUS_PCI_OP(read, byte, u8 *, readb, 3)
+APUS_PCI_OP(read, word, u16 *, readw, 2)
+APUS_PCI_OP(read, dword, u32 *, readl, 0)
+APUS_PCI_OP(write, byte, u8, writeb, 3)
+APUS_PCI_OP(write, word, u16, writew, 2)
+APUS_PCI_OP(write, dword, u32, writel, 0)
+
+
+static struct pci_ops apus_pci_ops = {
+	apus_pcibios_read_config_byte,
+	apus_pcibios_read_config_word,
+	apus_pcibios_read_config_dword,
+	apus_pcibios_write_config_byte,
+	apus_pcibios_write_config_word,
+	apus_pcibios_write_config_dword
+};
+
+static struct resource pci_mem = { "B/CVisionPPC PCI mem", CVPPC_FB_APERTURE_ONE, CVPPC_PCI_CONFIG, IORESOURCE_MEM };
+
+void __init
+apus_pcibios_fixup(void)
+{
+/*	struct pci_dev *dev = pci_find_slot(0, 1<<3);
+	unsigned int reg, val, offset;*/
+
+	/* FIXME: interrupt? */
+	/*dev->interrupt = xxx;*/
+
+        request_resource(&iomem_resource, &pci_mem);
+    	printk("%s: PCI mem resource requested\n", __FUNCTION__);
+}
+
+static void __init apus_pcibios_fixup_bus(struct pci_bus *bus)
+{
+        bus->resource[1] = &pci_mem;
+}
+
+
+/* 
+ * This is from pm2fb.c again
+ * 
+ * Check if PCI (B/CVisionPPC) is available, initialize it and set up
+ * the pcibios_* pointers
+ */
+
+
+void __init
+apus_setup_pci_ptrs(void)
+{
+	if (!powerup_PCI_present) {
+		DPRINTK("no PCI bridge detected\n");
+		return;
+	}
+	DPRINTK("Phase5 B/CVisionPPC PCI bridge detected.\n");
+
+	apus_hose = pcibios_alloc_controller();
+	if (!apus_hose) {
+		printk("apus_pci: Can't allocate PCI controller structure\n");
+		return;
+	}
+
+	if (!(apus_hose->cfg_data = ioremap(CVPPC_PCI_CONFIG, 256))) {
+		printk("apus_pci: unable to map PCI config region\n");
+		return;
+	}
+
+	if (!(apus_hose->cfg_addr = ioremap(CSPPC_PCI_BRIDGE, 256))) {
+		printk("apus_pci: unable to map PCI bridge\n");
+		return;
+	}
+
+	writel(CSPPCF_BRIDGE_BIG_ENDIAN, apus_hose->cfg_addr + CSPPC_BRIDGE_ENDIAN);
+	DEFW();
+
+	writel(CVPPC_REGS_REGION,  apus_hose->cfg_data+ PCI_BASE_ADDRESS_0);
+	DEFW();
+	writel(CVPPC_FB_APERTURE_ONE, apus_hose->cfg_data + PCI_BASE_ADDRESS_1);
+	DEFW();
+	writel(CVPPC_FB_APERTURE_TWO, apus_hose->cfg_data + PCI_BASE_ADDRESS_2);
+	DEFW();
+	writel(CVPPC_ROM_ADDRESS, apus_hose->cfg_data + PCI_ROM_ADDRESS);
+	DEFW();
+
+	writel(0xef000000 | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+		PCI_COMMAND_MASTER, apus_hose->cfg_data + PCI_COMMAND);
+	DEFW();
+
+	apus_hose->first_busno = 0;
+	apus_hose->last_busno = 0;
+	apus_hose->ops = &apus_pci_ops;
+	ppc_md.pcibios_fixup = apus_pcibios_fixup;
+	ppc_md.pcibios_fixup_bus = apus_pcibios_fixup_bus;
+
+	return;
+}
+
+#endif /* CONFIG_AMIGA */