patch-2.4.4 linux/include/asm-arm/arch-sa1100/dma.h
Next file: linux/include/asm-arm/arch-sa1100/keyboard.h
Previous file: linux/include/asm-arm/arch-sa1100/bitsy.h
Back to the patch index
Back to the overall index
- Lines: 109
- Date:
Thu Apr 12 12:20:31 2001
- Orig file:
v2.4.3/linux/include/asm-arm/arch-sa1100/dma.h
- Orig date:
Tue Jul 18 22:43:25 2000
diff -u --recursive --new-file v2.4.3/linux/include/asm-arm/arch-sa1100/dma.h linux/include/asm-arm/arch-sa1100/dma.h
@@ -1,12 +1,107 @@
/*
* linux/include/asm-arm/arch-sa1100/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
*/
+
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+#include <linux/config.h>
+#include "hardware.h"
+
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ */
#define MAX_DMA_ADDRESS 0xffffffff
-/* No DMA (strictly, a lie :-) ) */
+
+/*
+ * The regular generic DMA interface is inappropriate for the
+ * SA1100 DMA model. None of the SA1100 specific drivers using
+ * DMA are portable anyway so it's pointless to try to twist the
+ * regular DMA API to accommodate them.
+ */
#define MAX_DMA_CHANNELS 0
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS 6
+
+
+/*
+ * The SA-1111 SAC has two DMA channels.
+ */
+#define SA1111_SAC_DMA_CHANNELS 2
+#define SA1111_SAC_XMT_CHANNEL 0
+#define SA1111_SAC_RCV_CHANNEL 1
+
+
+/*
+ * The SA-1111 SAC channels will reside in the same index space as
+ * the built-in SA-1100 channels, and will take on the next available
+ * identifiers after the 1100.
+ */
+#define SA1111_SAC_DMA_BASE SA1100_DMA_CHANNELS
+
+#ifdef CONFIG_SA1111
+# define MAX_SA1100_DMA_CHANNELS (SA1100_DMA_CHANNELS + SA1111_SAC_DMA_CHANNELS)
+#else
+# define MAX_SA1100_DMA_CHANNELS SA1100_DMA_CHANNELS
+#endif
+
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+ DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */
+ DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */
+ DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */
+ DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */
+ DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */
+ DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */
+ DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */
+ DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */
+ DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */
+ DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */
+ DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */
+ DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */
+ DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */
+ DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */
+ DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */
+ DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */
+ DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */
+ DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+
+typedef void (*dma_callback_t)( void *buf_id, int size );
+
+
+/* SA1100 DMA API */
+extern int sa1100_request_dma( dmach_t *channel, const char *device_id );
+extern int sa1100_dma_set_callback( dmach_t channel, dma_callback_t cb );
+extern int sa1100_dma_set_device( dmach_t channel, dma_device_t device );
+extern int sa1100_dma_set_spin( dmach_t channel, dma_addr_t addr, int size );
+extern int sa1100_dma_queue_buffer( dmach_t channel, void *buf_id,
+ dma_addr_t data, int size );
+extern int sa1100_dma_get_current( dmach_t channel, void **buf_id, dma_addr_t *addr );
+extern int sa1100_dma_stop( dmach_t channel );
+extern int sa1100_dma_resume( dmach_t channel );
+extern int sa1100_dma_flush_all( dmach_t channel );
+extern void sa1100_free_dma( dmach_t channel );
+
+/* Sa1111 DMA interface (all but registration uses the above) */
+extern int sa1111_sac_request_dma( dmach_t *channel, const char *device_id,
+ unsigned int direction );
+extern int sa1111_check_dma_bug( dma_addr_t addr );
+
#endif /* _ASM_ARCH_DMA_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)