patch-2.4.4 linux/drivers/net/gt96100eth.c

Next file: linux/drivers/net/gt96100eth.h
Previous file: linux/drivers/net/fmv18x.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.3/linux/drivers/net/gt96100eth.c linux/drivers/net/gt96100eth.c
@@ -0,0 +1,1253 @@
+/*
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or support@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Ethernet driver for the MIPS GT96100 Advanced Communication Controller.
+ * 
+ */
+
+#ifndef __mips__
+#error This driver only works with MIPS architectures!
+#endif
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include "gt96100eth.h"
+
+#ifdef GT96100_DEBUG
+static int gt96100_debug = GT96100_DEBUG;
+#else
+static int gt96100_debug = 3;
+#endif
+
+// prototypes
+static void *dmaalloc(size_t size, dma_addr_t * dma_handle);
+static void dmafree(size_t size, void *vaddr);
+static int gt96100_add_hash_entry(struct net_device *dev,
+				  unsigned char *addr);
+static void read_mib_counters(struct gt96100_private *gp);
+static int read_MII(struct net_device *dev, u32 reg);
+static int write_MII(struct net_device *dev, u32 reg, u16 data);
+static void dump_MII(struct net_device *dev);
+static void update_stats(struct gt96100_private *gp);
+static void abort(struct net_device *dev, u32 abort_bits);
+static void hard_stop(struct net_device *dev);
+static void enable_ether_irq(struct net_device *dev);
+static void disable_ether_irq(struct net_device *dev);
+static int __init gt96100_probe1(struct net_device *dev, long ioaddr,
+				 int irq, int port_num);
+static int gt96100_init(struct net_device *dev);
+static int gt96100_open(struct net_device *dev);
+static int gt96100_close(struct net_device *dev);
+static int gt96100_tx(struct sk_buff *skb, struct net_device *dev);
+static int gt96100_rx(struct net_device *dev, u32 status);
+static void gt96100_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void gt96100_tx_timeout(struct net_device *dev);
+static void gt96100_set_rx_mode(struct net_device *dev);
+static struct net_device_stats *gt96100_get_stats(struct net_device *dev);
+
+static char version[] __devinitdata =
+    "gt96100eth.c:0.1 stevel@mvista.com\n";
+
+// FIX! Need real Ethernet addresses
+static unsigned char gt96100_station_addr[2][6] __devinitdata =
+    { {0x01, 0x02, 0x03, 0x04, 0x05, 0x06},
+{0x01, 0x02, 0x03, 0x04, 0x05, 0x07}
+};
+
+#define nibswap(x) ((((x) >> 4) & 0x0f) | (((x) << 4) & 0xf0))
+
+#define RUN_AT(x) (jiffies + (x))
+
+// For reading/writing 32-bit words from/to DMA memory
+#define cpu_to_dma32 cpu_to_be32
+#define dma32_to_cpu be32_to_cpu
+
+/*
+ * Base address and interupt of the GT96100 ethernet controllers
+ */
+static struct {
+	unsigned int port;
+	int irq;
+} gt96100_iflist[NUM_INTERFACES] = {
+	{
+	GT96100_ETH0_BASE, GT96100_ETHER0_IRQ}, {
+	GT96100_ETH1_BASE, GT96100_ETHER1_IRQ}
+};
+
+/*
+  DMA memory allocation, derived from pci_alloc_consistent.
+*/
+static void *dmaalloc(size_t size, dma_addr_t * dma_handle)
+{
+	void *ret;
+
+	ret =
+	    (void *) __get_free_pages(GFP_ATOMIC | GFP_DMA,
+				      get_order(size));
+
+	if (ret != NULL) {
+		dma_cache_inv((unsigned long) ret, size);
+		if (dma_handle != NULL)
+			*dma_handle = virt_to_phys(ret);
+
+		/* bump virtual address up to non-cached area */
+		ret = KSEG1ADDR(ret);
+	}
+
+	return ret;
+}
+
+static void dmafree(size_t size, void *vaddr)
+{
+	vaddr = KSEG0ADDR(vaddr);
+	free_pages((unsigned long) vaddr, get_order(size));
+}
+
+
+static int read_MII(struct net_device *dev, u32 reg)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	int timedout = 20;
+	u32 smir = smirOpCode | (gp->phy_addr << smirPhyAdBit) |
+	    (reg << smirRegAdBit);
+
+	// wait for last operation to complete
+	while (GT96100_READ(GT96100_ETH_SMI_REG) & smirBusy) {
+		// snooze for 1 msec and check again
+#if 0
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(10 * HZ / 10000);
+#else
+		mdelay(1);
+#endif
+
+		if (--timedout == 0) {
+			printk(KERN_ERR "%s: read_MII busy timeout!!\n",
+			       dev->name);
+			return -1;
+		}
+	}
+
+	GT96100_WRITE(GT96100_ETH_SMI_REG, smir);
+
+	timedout = 20;
+	// wait for read to complete
+	while (!(smir = GT96100_READ(GT96100_ETH_SMI_REG) & smirReadValid)) {
+		// snooze for 1 msec and check again
+#if 0
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(10 * HZ / 10000);
+#else
+		mdelay(1);
+#endif
+
+		if (--timedout == 0) {
+			printk(KERN_ERR "%s: read_MII timeout!!\n",
+			       dev->name);
+			return -1;
+		}
+	}
+
+	return (int) (smir & smirDataMask);
+}
+
+static int write_MII(struct net_device *dev, u32 reg, u16 data)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	int timedout = 20;
+	u32 smir =
+	    (gp->phy_addr << smirPhyAdBit) | (reg << smirRegAdBit) | data;
+
+	// wait for last operation to complete
+	while (GT96100_READ(GT96100_ETH_SMI_REG) & smirBusy) {
+		// snooze for 1 msec and check again
+#if 0
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(10 * HZ / 10000);
+#else
+		mdelay(1);
+#endif
+
+		if (--timedout == 0) {
+			printk(KERN_ERR "%s: write_MII busy timeout!!\n",
+			       dev->name);
+			return -1;
+		}
+	}
+
+	GT96100_WRITE(GT96100_ETH_SMI_REG, smir);
+	return 0;
+}
+
+
+static void dump_MII(struct net_device *dev)
+{
+	int i, val;
+
+	for (i = 0; i < 7; i++) {
+		if ((val = read_MII(dev, i)) >= 0)
+			printk("%s: MII Reg %d=%x\n", dev->name, i, val);
+	}
+	for (i = 16; i < 21; i++) {
+		if ((val = read_MII(dev, i)) >= 0)
+			printk("%s: MII Reg %d=%x\n", dev->name, i, val);
+	}
+}
+
+
+static int
+gt96100_add_hash_entry(struct net_device *dev, unsigned char *addr)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	u16 hashResult, stmp;
+	unsigned char ctmp, hash_ea[6];
+	u32 tblEntry, *tblEntryAddr;
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		// nibble swap
+		ctmp = nibswap(addr[i]);
+		// invert every nibble
+		hash_ea[i] = ((ctmp & 1) << 3) | ((ctmp & 8) >> 3) |
+		    ((ctmp & 2) << 1) | ((ctmp & 4) >> 1);
+		hash_ea[i] |= ((ctmp & 0x10) << 3) | ((ctmp & 0x80) >> 3) |
+		    ((ctmp & 0x20) << 1) | ((ctmp & 0x40) >> 1);
+	}
+
+	if (gp->hash_mode == 0) {
+		hashResult = ((u16) hash_ea[0] & 0xfc) << 7;
+		stmp =
+		    ((u16) hash_ea[0] & 0x03) | (((u16) hash_ea[1] & 0x7f)
+						 << 2);
+		stmp ^=
+		    (((u16) hash_ea[1] >> 7) & 0x01) | ((u16) hash_ea[2] <<
+							1);
+		stmp ^= (u16) hash_ea[3] | (((u16) hash_ea[4] & 1) << 8);
+		hashResult |= stmp;
+	} else {
+		return -1;	// don't support hash mode 1
+	}
+
+	tblEntryAddr =
+	    (u32 *) (&gp->hash_table[((u32) hashResult & 0x7ff) << 3]);
+
+	for (i = 0; i < HASH_HOP_NUMBER; i++) {
+		if ((*tblEntryAddr & hteValid)
+		    && !(*tblEntryAddr & hteSkip)) {
+			// This entry is already occupied, go to next entry
+			tblEntryAddr += 2;
+		} else {
+			memset(tblEntryAddr, 0, 8);
+			tblEntry = hteValid | hteRD;
+			tblEntry |= (u32) addr[5] << 3;
+			tblEntry |= (u32) addr[4] << 11;
+			tblEntry |= (u32) addr[3] << 19;
+			tblEntry |= ((u32) addr[2] & 0x1f) << 27;
+			*(tblEntryAddr + 1) = cpu_to_dma32(tblEntry);
+			tblEntry = ((u32) addr[2] >> 5) & 0x07;
+			tblEntry |= (u32) addr[1] << 3;
+			tblEntry |= (u32) addr[0] << 11;
+			*tblEntryAddr = cpu_to_dma32(tblEntry);
+			break;
+		}
+	}
+
+	if (i >= HASH_HOP_NUMBER) {
+		printk(KERN_ERR "%s: gt96100_add_hash_entry expired!\n",
+		       dev->name);
+		return -1;	// Couldn't find an unused entry
+	}
+
+	return 0;
+}
+
+
+static void read_mib_counters(struct gt96100_private *gp)
+{
+	u32 *mib_regs = (u32 *) & gp->mib;
+	int i;
+
+	for (i = 0; i < sizeof(mib_counters_t) / sizeof(u32); i++)
+		mib_regs[i] =
+		    GT96100ETH_READ(gp,
+				    GT96100_ETH_MIB_COUNT_BASE +
+				    i * sizeof(u32));
+}
+
+
+static void update_stats(struct gt96100_private *gp)
+{
+	mib_counters_t *mib = &gp->mib;
+	struct net_device_stats *stats = &gp->stats;
+
+	read_mib_counters(gp);
+
+	stats->rx_packets = mib->totalFramesReceived;
+	stats->tx_packets = mib->framesSent;
+	stats->rx_bytes = mib->totalByteReceived;
+	stats->tx_bytes = mib->byteSent;
+	stats->rx_errors = mib->totalFramesReceived - mib->framesReceived;
+	//the tx error counters are incremented by the ISR
+	//rx_dropped incremented by gt96100_rx
+	//tx_dropped incremented by gt96100_tx
+	stats->multicast = mib->multicastFramesReceived;
+	// Tx collisions incremented by ISR, so add in MIB Rx collisions
+	stats->collisions += mib->collision + mib->lateCollision;
+	stats->rx_length_errors = mib->oversizeFrames + mib->fragments;
+	// The RxError condition means the Rx DMA encountered a
+	// CPU owned descriptor, which, if things are working as
+	// they should, means the Rx ring has overflowed.
+	stats->rx_over_errors = mib->macRxError;
+	stats->rx_crc_errors = mib->cRCError;
+}
+
+static void abort(struct net_device *dev, u32 abort_bits)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	int timedout = 100;	// wait up to 100 msec for hard stop to complete
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: abort\n", dev->name);
+
+	// Return if neither Rx or Tx abort bits are set
+	if (!(abort_bits & (sdcmrAR | sdcmrAT)))
+		return;
+
+	// make sure only the Rx/Tx abort bits are set
+	abort_bits &= (sdcmrAR | sdcmrAT);
+
+	spin_lock(&gp->lock);
+
+	// abort any Rx/Tx DMA immediately
+	GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, abort_bits);
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: abort: SDMA comm = %x\n",
+		       dev->name, GT96100ETH_READ(gp,
+						  GT96100_ETH_SDMA_COMM));
+
+	// wait for abort to complete
+	while (GT96100ETH_READ(gp, GT96100_ETH_SDMA_COMM) & abort_bits) {
+		// snooze for 20 msec and check again
+#if 0
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(10 * HZ / 10000);
+#else
+		mdelay(1);
+#endif
+
+		if (--timedout == 0) {
+			printk(KERN_ERR "%s: abort timeout!!\n",
+			       dev->name);
+			break;
+		}
+	}
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: abort: timedout=%d\n", dev->name,
+		       timedout);
+
+	spin_unlock(&gp->lock);
+}
+
+
+static void hard_stop(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: hard stop\n", dev->name);
+
+	disable_ether_irq(dev);
+
+	abort(dev, sdcmrAR | sdcmrAT);
+
+	// disable port
+	GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG, 0);
+}
+
+
+static void enable_ether_irq(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	u32 intMask;
+
+	// unmask interrupts
+	GT96100ETH_WRITE(gp, GT96100_ETH_INT_MASK,
+			 icrRxBuffer | icrTxBufferLow | icrTxEndLow |
+			 icrRxError | icrTxErrorLow | icrRxOVR |
+			 icrTxUdr | icrRxBufferQ0 | icrRxErrorQ0 |
+			 icrMIIPhySTC);
+
+	// now route ethernet interrupts to GT Int0 (eth0 and eth1 will be
+	// sharing it).
+	// FIX! The kernel's irq code should do this
+	intMask = GT96100_READ(GT96100_INT0_HIGH_MASK);
+	intMask |= 1 << gp->port_num;
+	GT96100_WRITE(GT96100_INT0_HIGH_MASK, intMask);
+}
+
+static void disable_ether_irq(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	u32 intMask;
+
+	// FIX! The kernel's irq code should do this
+	intMask = GT96100_READ(GT96100_INT0_HIGH_MASK);
+	intMask &= ~(1 << gp->port_num);
+	GT96100_WRITE(GT96100_INT0_HIGH_MASK, intMask);
+
+	GT96100ETH_WRITE(gp, GT96100_ETH_INT_MASK, 0);
+}
+
+
+/*
+ * Probe for a GT96100 ethernet controller.
+ */
+int __init gt96100_probe(struct net_device *dev)
+{
+	unsigned int base_addr = dev ? dev->base_addr : 0;
+	int i;
+
+#ifndef CONFIG_MIPS_GT96100ETH
+	return -ENODEV;
+#endif
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: gt96100_probe\n", dev->name);
+
+	if (base_addr >= KSEG0)	/* Check a single specified location. */
+		return gt96100_probe1(dev, base_addr, dev->irq, 0);
+	else if (base_addr != 0)	/* Don't probe at all. */
+		return -ENXIO;
+
+//	for (i = 0; i<NUM_INTERFACES; i++) {
+	for (i = NUM_INTERFACES - 1; i >= 0; i--) {
+		int base_addr = gt96100_iflist[i].port;
+#if 0
+		if (check_region(base_addr, GT96100_ETH_IO_SIZE)) {
+			printk(KERN_ERR
+			       "%s: gt96100_probe: ioaddr 0x%lx taken?\n",
+			       dev->name, base_addr);
+			continue;
+		}
+#endif
+		if (gt96100_probe1
+		    (dev, base_addr, gt96100_iflist[i].irq, i) == 0)
+			return 0;
+	}
+	return -ENODEV;
+}
+
+
+
+static int __init
+gt96100_probe1(struct net_device *dev, long ioaddr, int irq, int port_num)
+{
+	static unsigned version_printed = 0;
+	struct gt96100_private *gp = NULL;
+	int i, retval;
+	u32 cpuConfig;
+
+	// FIX! probe for GT96100 by reading a suitable register
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "gt96100_probe1: ioaddr 0x%lx, irq %d\n",
+		       ioaddr, irq);
+
+	request_region(ioaddr, GT96100_ETH_IO_SIZE, "GT96100ETH");
+
+	cpuConfig = GT96100_READ(GT96100_CPU_INTERF_CONFIG);
+	if (cpuConfig & (1 << 12)) {
+		printk(KERN_ERR
+		       "gt96100_probe1: must be in Big Endian mode!\n");
+		retval = -ENODEV;
+		goto free_region;
+	}
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO
+		       "gt96100_probe1: chip in Big Endian mode - cool\n");
+
+	/* Allocate a new 'dev' if needed. */
+	if (dev == NULL)
+		dev = init_etherdev(0, sizeof(struct gt96100_private));
+
+	if (gt96100_debug && version_printed++ == 0)
+		printk(version);
+
+	if (irq < 0) {
+		printk(KERN_ERR
+		       "gt96100_probe1: irq unknown - probing not supported\n");
+		retval = -ENODEV;
+		goto free_region;
+	}
+
+	printk(KERN_INFO "%s: GT-96100 ethernet found at 0x%lx, irq %d\n",
+	       dev->name, ioaddr, irq);
+
+	/* private struct aligned and zeroed by init_etherdev */
+	/* Fill in the 'dev' fields. */
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	memcpy(dev->dev_addr, gt96100_station_addr[port_num],
+	       sizeof(dev->dev_addr));
+
+	printk(KERN_INFO "%s: HW Address ", dev->name);
+	for (i = 0; i < sizeof(dev->dev_addr); i++) {
+		printk("%2.2x", dev->dev_addr[i]);
+		printk(i < 5 ? ":" : "\n");
+	}
+
+	/* Initialize our private structure. */
+	if (dev->priv == NULL) {
+
+		gp =
+		    (struct gt96100_private *) kmalloc(sizeof(*gp),
+						       GFP_KERNEL);
+		if (gp == NULL) {
+			retval = -ENOMEM;
+			goto free_region;
+		}
+
+		dev->priv = gp;
+	}
+
+	gp = dev->priv;
+
+	memset(gp, 0, sizeof(*gp));	// clear it
+
+	gp->port_num = port_num;
+	gp->io_size = GT96100_ETH_IO_SIZE;
+	gp->port_offset = port_num * GT96100_ETH_IO_SIZE;
+	gp->phy_addr = port_num + 1;
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: gt96100_probe1, port %d\n",
+		       dev->name, gp->port_num);
+
+	// Allocate Rx and Tx descriptor rings
+	if (gp->rx_ring == NULL) {
+		// All descriptors in ring must be 16-byte aligned
+		gp->rx_ring = dmaalloc(sizeof(gt96100_rd_t) * RX_RING_SIZE
+				       +
+				       sizeof(gt96100_td_t) * TX_RING_SIZE,
+				       &gp->rx_ring_dma);
+		if (gp->rx_ring == NULL) {
+			retval = -ENOMEM;
+			goto free_region;
+		}
+
+		gp->tx_ring =
+		    (gt96100_td_t *) (gp->rx_ring + RX_RING_SIZE);
+		gp->tx_ring_dma =
+		    gp->rx_ring_dma + sizeof(gt96100_rd_t) * RX_RING_SIZE;
+	}
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO
+		       "%s: gt96100_probe1, rx_ring=%p, tx_ring=%p\n",
+		       dev->name, gp->rx_ring, gp->tx_ring);
+
+	// Allocate Rx Hash Table
+	if (gp->hash_table == NULL) {
+		gp->hash_table = (char *) dmaalloc(RX_HASH_TABLE_SIZE,
+						   &gp->hash_table_dma);
+		if (gp->hash_table == NULL) {
+			dmafree(sizeof(gt96100_rd_t) * RX_RING_SIZE
+				+ sizeof(gt96100_td_t) * TX_RING_SIZE,
+				gp->rx_ring);
+			retval = -ENOMEM;
+			goto free_region;
+		}
+	}
+
+	if (gt96100_debug > 2)
+		printk(KERN_INFO "%s: gt96100_probe1, hash=%p\n",
+		       dev->name, gp->hash_table);
+
+	spin_lock_init(&gp->lock);
+
+	dev->open = gt96100_open;
+	dev->hard_start_xmit = gt96100_tx;
+	dev->stop = gt96100_close;
+	dev->get_stats = gt96100_get_stats;
+	//dev->do_ioctl = gt96100_ioctl;
+	dev->set_multicast_list = gt96100_set_rx_mode;
+	dev->tx_timeout = gt96100_tx_timeout;
+	dev->watchdog_timeo = GT96100ETH_TX_TIMEOUT;
+
+	/* Fill in the fields of the device structure with ethernet values. */
+	ether_setup(dev);
+	return 0;
+
+      free_region:
+	release_region(ioaddr, gp->io_size);
+	unregister_netdev(dev);
+	if (dev->priv != NULL)
+		kfree(dev->priv);
+	kfree(dev);
+	printk(KERN_ERR "%s: gt96100_probe1 failed.  Returns %d\n",
+	       dev->name, retval);
+	return retval;
+}
+
+
+static int gt96100_init(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	unsigned long flags;
+	u32 phyAD, ciu;
+	int i;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: dev=%p\n", dev->name, dev);
+
+	// Stop and disable Port
+	hard_stop(dev);
+
+	spin_lock_irqsave(&gp->lock, flags);
+
+	// First things first, set-up hash table
+	memset(gp->hash_table, 0, RX_HASH_TABLE_SIZE);	// clear it
+	gp->hash_mode = 0;
+	// Add a single entry to hash table - our ethernet address
+	gt96100_add_hash_entry(dev, dev->dev_addr);
+	// Set-up DMA ptr to hash table
+	GT96100ETH_WRITE(gp, GT96100_ETH_HASH_TBL_PTR, gp->hash_table_dma);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: Hash Tbl Ptr=%x\n", dev->name,
+		       GT96100ETH_READ(gp, GT96100_ETH_HASH_TBL_PTR));
+
+	// Setup Tx descriptor ring
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		gp->tx_ring[i].cmdstat = 0;	// CPU owns
+		gp->tx_ring[i].byte_cnt = 0;
+		gp->tx_ring[i].buff_ptr = 0;
+		gp->tx_ring[i].next =
+		    cpu_to_dma32(gp->tx_ring_dma +
+				 sizeof(gt96100_td_t) * (i + 1));
+	}
+	/* Wrap the ring. */
+	gp->tx_ring[i - 1].next = cpu_to_dma32(gp->tx_ring_dma);
+
+	// setup only the lowest priority TxCDP reg
+	GT96100ETH_WRITE(gp, GT96100_ETH_CURR_TX_DESC_PTR0,
+			 gp->tx_ring_dma);
+	GT96100ETH_WRITE(gp, GT96100_ETH_CURR_TX_DESC_PTR1, 0);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: Curr Tx Desc Ptr0=%x\n",
+		       dev->name, GT96100ETH_READ(gp,
+						  GT96100_ETH_CURR_TX_DESC_PTR0));
+
+	// Setup Rx descriptor ring 
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		dma_addr_t rx_buff_dma;
+		gp->rx_ring[i].next =
+		    cpu_to_dma32(gp->rx_ring_dma +
+				 sizeof(gt96100_rd_t) * (i + 1));
+		if (gp->rx_buff[i] == NULL)
+			gp->rx_buff[i] =
+			    dmaalloc(PKT_BUF_SZ, &rx_buff_dma);
+		else
+			rx_buff_dma = virt_to_phys(gp->rx_buff[i]);
+		if (gp->rx_buff[i] == NULL)
+			break;
+		gp->rx_ring[i].buff_ptr = cpu_to_dma32(rx_buff_dma);
+		gp->rx_ring[i].buff_cnt_sz =
+		    cpu_to_dma32(PKT_BUF_SZ << rdBuffSzBit);
+		// Give ownership to device, enable interrupt
+		gp->rx_ring[i].cmdstat =
+		    cpu_to_dma32((u32) (rxOwn | rxEI));
+	}
+
+	if (i != RX_RING_SIZE) {
+		int j;
+		for (j = 0; j < RX_RING_SIZE; j++) {
+			if (gp->rx_buff[j]) {
+				dmafree(PKT_BUF_SZ, gp->rx_buff[j]);
+				gp->rx_buff[j] = NULL;
+			}
+		}
+		printk(KERN_ERR "%s: Rx ring allocation failed.\n",
+		       dev->name);
+		spin_unlock_irqrestore(&gp->lock, flags);
+		return -ENOMEM;
+	}
+
+	/* Wrap the ring. */
+	gp->rx_ring[i - 1].next = cpu_to_dma32(gp->rx_ring_dma);
+
+	// Set our MII PHY device address
+	phyAD = GT96100_READ(GT96100_ETH_PHY_ADDR_REG);
+	phyAD &= ~(0x1f << (gp->port_num * 5));
+	phyAD |= gp->phy_addr << (gp->port_num * 5);
+	GT96100_WRITE(GT96100_ETH_PHY_ADDR_REG, phyAD);
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: PhyAD=%x\n", dev->name,
+		       GT96100_READ(GT96100_ETH_PHY_ADDR_REG));
+
+	// Clear all the RxFDP and RXCDP regs...
+	for (i = 0; i < 4; i++) {
+		GT96100ETH_WRITE(gp, GT96100_ETH_1ST_RX_DESC_PTR0 + i * 4,
+				 0);
+		GT96100ETH_WRITE(gp, GT96100_ETH_CURR_RX_DESC_PTR0 + i * 4,
+				 0);
+	}
+	// and setup only the lowest priority RxFDP and RxCDP regs
+	GT96100ETH_WRITE(gp, GT96100_ETH_1ST_RX_DESC_PTR0,
+			 gp->rx_ring_dma);
+	GT96100ETH_WRITE(gp, GT96100_ETH_CURR_RX_DESC_PTR0,
+			 gp->rx_ring_dma);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: 1st/Curr Rx Desc Ptr0=%x/%x\n",
+		       dev->name, GT96100ETH_READ(gp,
+						  GT96100_ETH_1ST_RX_DESC_PTR0),
+		       GT96100ETH_READ(gp, GT96100_ETH_CURR_RX_DESC_PTR0));
+
+	// init Rx/Tx indeces and pkt counters
+	gp->rx_next_out = gp->tx_next_in = gp->tx_next_out = 0;
+	gp->tx_count = 0;
+
+	// setup DMA
+
+	// FIX! this should be done by Kernel setup code
+	ciu = GT96100_READ(GT96100_CIU_ARBITER_CONFIG);
+	ciu |= (0x0c << (gp->port_num * 2));	// set Ether DMA req priority to high
+	// FIX! setting the following bit causes the EV96100 board to hang!!!
+	//ciu |= (1 << (24+gp->port_num));   // pull Ethernet port out of Reset???
+	// FIX! endian mode???
+	ciu &= ~(1 << 31);	// set desc endianess to Big
+	GT96100_WRITE(GT96100_CIU_ARBITER_CONFIG, ciu);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: CIU Config=%x/%x\n", dev->name,
+		       ciu, GT96100_READ(GT96100_CIU_ARBITER_CONFIG));
+
+	// We want the Rx/Tx DMA to write/read data to/from memory in
+	// Big Endian mode. Also set DMA Burst Size to 8 64Bit words.
+	// FIX! endian mode???
+	GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_CONFIG,
+			 //sdcrBLMR | sdcrBLMT |
+			 (0xf << sdcrRCBit) | sdcrRIFB | (3 << sdcrBSZBit));
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: SDMA Config=%x\n", dev->name,
+		       GT96100ETH_READ(gp, GT96100_ETH_SDMA_CONFIG));
+
+	// start Rx DMA
+	GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, sdcmrERD);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: SDMA Comm=%x\n", dev->name,
+		       GT96100ETH_READ(gp, GT96100_ETH_SDMA_COMM));
+
+	// enable interrupts
+	enable_ether_irq(dev);
+
+	/*
+	 * Disable all Type-of-Service queueing. All Rx packets will be
+	 * treated normally and will be sent to the lowest priority
+	 * queue.
+	 *
+	 * Disable flow-control for now. FIX! support flow control?
+	 */
+	// clear all the MIB ctr regs
+	// Enable reg clear on read. FIX! desc of this bit is inconsistent
+	// in the GT-96100A datasheet.
+	GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG_EXT,
+			 pcxrFCTL | pcxrFCTLen | pcxrFLP);
+	read_mib_counters(gp);
+	GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG_EXT,
+			 pcxrFCTL | pcxrFCTLen | pcxrFLP | pcxrMIBclrMode);
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: Port Config Ext=%x\n", dev->name,
+		       GT96100ETH_READ(gp, GT96100_ETH_PORT_CONFIG_EXT));
+
+	// enable this port (set hash size to 1/2K)
+	GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG, pcrEN | pcrHS);
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_init: Port Config=%x\n", dev->name,
+		       GT96100ETH_READ(gp, GT96100_ETH_PORT_CONFIG));
+
+	// we should now be receiving frames
+	if (gt96100_debug > 2)
+		dump_MII(dev);
+
+	spin_unlock_irqrestore(&gp->lock, flags);
+	return 0;
+}
+
+
+static int gt96100_open(struct net_device *dev)
+{
+	int retval;
+
+	MOD_INC_USE_COUNT;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_open: dev=%p\n", dev->name, dev);
+
+	if ((retval = request_irq(dev->irq, &gt96100_interrupt,
+				  SA_SHIRQ, dev->name, dev))) {
+		printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
+		       dev->irq);
+		MOD_DEC_USE_COUNT;
+		return retval;
+	}
+	// Initialize and startup the GT-96100 ethernet port
+	if ((retval = gt96100_init(dev))) {
+		printk(KERN_ERR "%s: error in gt96100_init\n", dev->name);
+		free_irq(dev->irq, dev);
+		MOD_DEC_USE_COUNT;
+		return retval;
+	}
+
+	netif_start_queue(dev);
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_open: Initialization done.\n",
+		       dev->name);
+
+	return 0;
+}
+
+static int gt96100_close(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	int i;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_close: dev=%p\n", dev->name, dev);
+
+	// stop the device
+	if (netif_device_present(dev)) {
+		netif_stop_queue(dev);
+		hard_stop(dev);
+	}
+	// free the Rx DMA buffers
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (gp->rx_buff[i]) {
+			dmafree(PKT_BUF_SZ, gp->rx_buff[i]);
+			gp->rx_buff[i] = NULL;
+		}
+	}
+
+	free_irq(dev->irq, dev);
+
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+
+static int gt96100_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	unsigned long flags;
+	int nextIn;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_tx: skb->len=%d, skb->data=%p\n",
+		       dev->name, skb->len, skb->data);
+
+	spin_lock_irqsave(&gp->lock, flags);
+
+	if (gp->tx_count >= TX_RING_SIZE) {
+		printk(KERN_WARNING
+		       "%s: Tx Ring full, refusing to send buffer.\n",
+		       dev->name);
+		gp->stats.tx_dropped++;
+		spin_unlock_irqrestore(&gp->lock, flags);
+		return 1;
+	}
+	// Prepare the Descriptor at tx_next_in
+	nextIn = gp->tx_next_in;
+
+	if (dma32_to_cpu(gp->tx_ring[nextIn].cmdstat) & txOwn) {
+		printk(KERN_ERR "%s: gt96100_tx: TxOwn bit wrong!!\n",
+		       dev->name);
+	}
+
+	gp->tx_skbuff[nextIn] = skb;
+	gp->tx_ring[nextIn].byte_cnt =
+	    cpu_to_dma32(skb->len << tdByteCntBit);
+	gp->tx_ring[nextIn].buff_ptr =
+	    cpu_to_dma32(virt_to_phys(skb->data));
+	// Give ownership to device, set first and last desc, enable interrupt
+	// Setting of ownership bit must be *last*!
+	gp->tx_ring[nextIn].cmdstat =
+	    cpu_to_dma32((u32) (txOwn | txEI | txFirst | txLast));
+
+	// increment tx_next_in with wrap
+	gp->tx_next_in = (nextIn + 1) % TX_RING_SIZE;
+	// If count is zero, DMA should be stopped, so restart
+	if (gp->tx_count == 0) {
+		if (GT96100ETH_READ(gp, GT96100_ETH_PORT_STATUS) &
+		    psrTxLow) printk(KERN_WARNING
+				     "%s: Tx count zero but Tx queue running!\n",
+				     dev->name);
+		GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM,
+				 sdcmrERD | sdcmrTXDL);
+	}
+	// increment count and stop queue if full
+	if (++gp->tx_count == TX_RING_SIZE)
+		netif_stop_queue(dev);
+
+	dev->trans_start = jiffies;
+	spin_unlock_irqrestore(&gp->lock, flags);
+
+	return 0;
+}
+
+
+static int gt96100_rx(struct net_device *dev, u32 status)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	struct sk_buff *skb;
+	int pkt_len, nextOut;
+	gt96100_rd_t *rd;
+	u32 cmdstat;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_rx: dev=%p, status = %x\n",
+		       dev->name, dev, status);
+
+	// Continue until we reach the current descriptor pointer
+	for (nextOut = gp->rx_next_out;
+	     nextOut !=
+	     (GT96100ETH_READ(gp, GT96100_ETH_CURR_RX_DESC_PTR0) -
+	      gp->rx_ring_dma) / sizeof(gt96100_rd_t);
+	     nextOut = (nextOut + 1) % RX_RING_SIZE) {
+
+		rd = &gp->rx_ring[nextOut];
+		cmdstat = dma32_to_cpu(rd->cmdstat);
+
+		if (cmdstat & (u32) rxOwn) {
+			cmdstat &= ~((u32) rxOwn);
+			rd->cmdstat = cpu_to_dma32(cmdstat);
+			printk(KERN_ERR
+			       "%s: gt96100_rx: ownership bit wrong!\n",
+			       dev->name);
+		}
+		// must be first and last (ie only) buffer of packet
+		if (!(cmdstat & (u32) rxFirst)
+		    || !(cmdstat & (u32) rxLast)) {
+			printk(KERN_ERR
+			       "%s: gt96100_rx: desc not first and last!\n",
+			       dev->name);
+			continue;
+		}
+		// drop this received pkt if there were any errors
+		if ((cmdstat & (u32) rxErrorSummary)
+		    || (status & icrRxErrorQ0)) {
+			// update the detailed rx error counters that are not covered
+			// by the MIB counters.
+			if (cmdstat & (u32) rxOverrun)
+				gp->stats.rx_fifo_errors++;
+			continue;
+		}
+
+		pkt_len = dma32_to_cpu(rd->buff_cnt_sz) & rdByteCntMask;
+
+		/* Create new skb. */
+		skb = dev_alloc_skb(pkt_len + 2);
+		if (skb == NULL) {
+			printk(KERN_ERR
+			       "%s: Memory squeeze, dropping packet.\n",
+			       dev->name);
+			gp->stats.rx_dropped++;
+			continue;
+		}
+		skb->dev = dev;
+		skb_reserve(skb, 2);	/* 16 byte IP header align */
+		skb_put(skb, pkt_len);	/* Make room */
+		eth_copy_and_sum(skb, gp->rx_buff[nextOut], pkt_len, 0);
+		skb->protocol = eth_type_trans(skb, dev);
+		netif_rx(skb);	/* pass the packet to upper layers */
+
+		// now we can release ownership of this desc back to device
+		cmdstat |= (u32) rxOwn;
+		rd->cmdstat = cpu_to_dma32(cmdstat);
+
+		dev->last_rx = jiffies;
+	}
+
+	gp->rx_next_out = nextOut;
+	return 0;
+}
+
+
+static void gt96100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	u32 status;
+
+	if (dev == NULL) {
+		printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
+		return;
+	}
+
+	status = GT96100ETH_READ(gp, GT96100_ETH_INT_CAUSE);
+	// ACK interrupts
+#if 0
+	GT96100ETH_CLRBIT(gp, GT96100_ETH_INT_CAUSE,
+			  icrEtherIntSum | icrRxBufferQ1 | icrRxBufferQ2 |
+			  icrRxBufferQ3 | icrRxBufferQ0 | icrTxBufferHigh |
+			  icrTxEndHigh | icrTxBufferLow | icrTxEndLow |
+			  icrTxErrorHigh | icrTxErrorLow | icrTxUdr);
+#else
+	GT96100ETH_WRITE(gp, GT96100_ETH_INT_CAUSE, 0);
+#endif
+
+	if ((status & icrEtherIntSum) == 0) {
+		// not our interrupt
+		//printk("%s: isr: no ints? icr=%x,cp0_cause=%x\n",
+		//       dev->name, status, read_32bit_cp0_register(CP0_CAUSE));
+		return;
+	}
+
+	if (gt96100_debug > 3)
+		printk("%s: isr: entry, icr=%x\n", dev->name, status);
+
+	if (status & (icrRxBufferQ1 | icrRxBufferQ2 | icrRxBufferQ3)) {
+		printk(KERN_ERR "%s: isr: Rx intr in unused queues!?\n",
+		       dev->name);
+	}
+
+	if (status & icrRxBufferQ0) {
+		gt96100_rx(dev, status);
+	}
+
+	if (status & (icrTxBufferHigh | icrTxEndHigh)) {
+		printk(KERN_ERR "%s: isr: Tx intr in unused queue!?\n",
+		       dev->name);
+	}
+
+	if (status & icrMIIPhySTC) {
+		u32 psr = GT96100ETH_READ(gp, GT96100_ETH_PORT_STATUS);
+		printk("%s: port status:\n", dev->name);
+		printk
+		    ("%s:     %s MBit/s, %s-duplex, flow-control %s, link is %s,\n",
+		     dev->name, psr & psrSpeed ? "100" : "10",
+		     psr & psrDuplex ? "full" : "half",
+		     psr & psrFctl ? "disabled" : "enabled",
+		     psr & psrLink ? "up" : "down");
+		printk
+		    ("%s:     TxLowQ is %s, TxHighQ is %s, Transmitter is %s\n",
+		     dev->name, psr & psrTxLow ? "running" : "stopped",
+		     psr & psrTxHigh ? "running" : "stopped",
+		     psr & psrTxInProg ? "on" : "off");
+		gp->last_psr = psr;
+	}
+
+	if (status & (icrTxBufferLow | icrTxEndLow)) {
+		int nextOut;
+		gt96100_td_t *td;
+		u32 cmdstat;
+
+		// Continue until we reach the current descriptor pointer
+		for (nextOut = gp->tx_next_out;
+		     nextOut !=
+		     (GT96100ETH_READ(gp, GT96100_ETH_CURR_TX_DESC_PTR0) -
+		      gp->tx_ring_dma) / sizeof(gt96100_td_t);
+		     nextOut = (nextOut + 1) % TX_RING_SIZE) {
+
+			td = &gp->tx_ring[nextOut];
+			cmdstat = dma32_to_cpu(td->cmdstat);
+
+			if (gt96100_debug > 2)
+				printk("%s: isr: Tx desc cmdstat=%x\n",
+				       dev->name, cmdstat);
+
+			if (cmdstat & (u32) txOwn) {
+				cmdstat &= ~((u32) txOwn);
+				td->cmdstat = cpu_to_dma32(cmdstat);
+				printk(KERN_ERR
+				       "%s: isr: Tx ownership bit wrong!\n",
+				       dev->name);
+			}
+			// increment Tx error stats
+			if (cmdstat & (u32) txErrorSummary) {
+				if (gt96100_debug > 2)
+					printk
+					    ("%s: gt96100_interrupt: Tx error, cmdstat = %x\n",
+					     dev->name, cmdstat);
+				gp->stats.tx_errors++;
+				if (cmdstat & (u32) txReTxLimit)
+					gp->stats.collisions++;
+				if (cmdstat & (u32) txUnderrun)
+					gp->stats.tx_fifo_errors++;
+				if (cmdstat & (u32) txLateCollision)
+					gp->stats.tx_window_errors++;
+			}
+			// Wake the queue if the ring was full
+			if (gp->tx_count == TX_RING_SIZE)
+				netif_wake_queue(dev);
+
+			// decrement tx ring buffer count
+			if (gp->tx_count)
+				gp->tx_count--;
+
+			// free the skb
+			if (gp->tx_skbuff[nextOut]) {
+				if (gt96100_debug > 2)
+					printk
+					    ("%s: isr: good Tx, skb=%p\n",
+					     dev->name,
+					     gp->tx_skbuff[nextOut]);
+				dev_kfree_skb_irq(gp->tx_skbuff[nextOut]);
+				gp->tx_skbuff[nextOut] = NULL;
+			} else {
+				printk(KERN_ERR "%s: isr: no skb!\n",
+				       dev->name);
+			}
+		}
+
+		if (gp->tx_count == 0 && nextOut != gp->tx_next_in) {
+			// FIX! this should probably be a panic
+			printk(KERN_ERR
+			       "%s: isr: warning! Tx queue inconsistent\n",
+			       dev->name);
+		}
+
+		gp->tx_next_out = nextOut;
+
+		if ((status & icrTxEndLow) && gp->tx_count != 0) {
+			// we must restart the DMA
+			if (gt96100_debug > 2)
+				printk("%s: isr: Restarting Tx DMA\n",
+				       dev->name);
+			GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM,
+					 sdcmrERD | sdcmrTXDL);
+		}
+	}
+	// Now check TX errors (RX errors were handled in gt96100_rx)
+
+	if (status & icrTxErrorHigh) {
+		printk(KERN_ERR
+		       "%s: isr: Tx resource error in unused queue!?\n",
+		       dev->name);
+	}
+
+	if (status & icrTxErrorLow) {
+		printk(KERN_ERR "%s: isr: Tx resource error\n", dev->name);
+	}
+
+	if (status & icrTxUdr) {
+		printk(KERN_ERR "%s: isr: Tx underrun error\n", dev->name);
+	}
+
+	if (gt96100_debug > 3)
+		printk("%s: isr: exit, icr=%x\n",
+		       dev->name, GT96100ETH_READ(gp,
+						  GT96100_ETH_INT_CAUSE));
+}
+
+
+/*
+ * The Tx ring has been full longer than the watchdog timeout
+ * value, meaning that the interrupt routine has not been freeing
+ * up space in the Tx ring buffer.
+ */
+static void gt96100_tx_timeout(struct net_device *dev)
+{
+//    struct gt96100_private *gp = (struct gt96100_private *)dev->priv;
+
+	printk(KERN_ERR "%s: gt96100_tx_timeout: dev=%p\n", dev->name,
+	       dev);
+
+	// FIX! do something, like reset the device
+}
+
+
+static void gt96100_set_rx_mode(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	unsigned long flags;
+	struct dev_mc_list *mcptr;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_set_rx_mode: dev=%p, flags=%x\n",
+		       dev->name, dev, dev->flags);
+
+	// stop the Receiver DMA
+	abort(dev, sdcmrAR);
+
+	spin_lock_irqsave(&gp->lock, flags);
+
+	if (dev->flags & IFF_PROMISC)
+		GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG,
+				 pcrEN | pcrHS | pcrPM);
+
+	memset(gp->hash_table, 0, RX_HASH_TABLE_SIZE);	// clear hash table
+	// Add our ethernet address
+	gt96100_add_hash_entry(dev, dev->dev_addr);
+
+	if (dev->mc_count) {
+		for (mcptr = dev->mc_list; mcptr; mcptr = mcptr->next) {
+			gt96100_add_hash_entry(dev, mcptr->dmi_addr);
+		}
+	}
+	// restart Rx DMA
+	GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, sdcmrERD);
+
+	spin_unlock_irqrestore(&gp->lock, flags);
+}
+
+static struct net_device_stats *gt96100_get_stats(struct net_device *dev)
+{
+	struct gt96100_private *gp = (struct gt96100_private *) dev->priv;
+	unsigned long flags;
+
+	if (gt96100_debug > 2)
+		printk("%s: gt96100_get_stats: dev=%p\n", dev->name, dev);
+
+	if (netif_device_present(dev)) {
+		spin_lock_irqsave(&gp->lock, flags);
+		update_stats(gp);
+		spin_unlock_irqrestore(&gp->lock, flags);
+	}
+
+	return &gp->stats;
+}
+
+module_init(gt96100_probe);

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)