patch-2.4.4 linux/arch/mips/ite-boards/generic/dbg_io.c

Next file: linux/arch/mips/ite-boards/generic/int-handler.S
Previous file: linux/arch/mips/ite-boards/generic/Makefile
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.3/linux/arch/mips/ite-boards/generic/dbg_io.c linux/arch/mips/ite-boards/generic/dbg_io.c
@@ -0,0 +1,127 @@
+
+#include <linux/config.h>
+
+#ifdef CONFIG_REMOTE_DEBUG
+
+/* --- CONFIG --- */
+
+/* we need uint32 uint8 */
+/* #include "types.h" */
+typedef         unsigned char uint8;
+typedef         unsigned int  uint32;
+
+/* --- END OF CONFIG --- */
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [stevel] we use the IT8712 serial port for kgdb */
+#define	DEBUG_BASE  0xB40003F8 /* 8712 serial port 1 base address */
+#define MAX_BAUD    115200
+
+/* === END OF CONFIG === */
+
+/* register offset */
+#define         OFS_RCV_BUFFER          0
+#define         OFS_TRANS_HOLD          0
+#define         OFS_SEND_BUFFER         0
+#define         OFS_INTR_ENABLE         1
+#define         OFS_INTR_ID             2
+#define         OFS_DATA_FORMAT         3
+#define         OFS_LINE_CONTROL        3
+#define         OFS_MODEM_CONTROL       4
+#define         OFS_RS232_OUTPUT        4
+#define         OFS_LINE_STATUS         5
+#define         OFS_MODEM_STATUS        6
+#define         OFS_RS232_INPUT         6
+#define         OFS_SCRATCH_PAD         7
+
+#define         OFS_DIVISOR_LSB         0
+#define         OFS_DIVISOR_MSB         1
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y)    (*((volatile uint8*)(DEBUG_BASE + y)))
+#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+    /* disable interrupts */
+    UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+    /* set up buad rate */
+    { 
+        uint32 divisor;
+       
+        /* set DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+        
+        /* set divisor */
+        divisor = MAX_BAUD / baud;
+        UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+        UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
+
+        /* clear DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+    }
+
+    /* set data format */
+    UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+    if (!remoteDebugInitialized) {
+	remoteDebugInitialized = 1;
+	debugInit(UART16550_BAUD_115200,
+		  UART16550_DATA_8BIT,
+		  UART16550_PARITY_NONE,
+		  UART16550_STOP_1BIT);
+    }
+
+    while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+    return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+    if (!remoteDebugInitialized) {
+	remoteDebugInitialized = 1;
+	debugInit(UART16550_BAUD_115200,
+		  UART16550_DATA_8BIT,
+		  UART16550_PARITY_NONE,
+		  UART16550_STOP_1BIT);
+    }
+
+    while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
+    UART16550_WRITE(OFS_SEND_BUFFER, byte);
+    return 1;
+}
+
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)