patch-2.4.27 linux-2.4.27/drivers/message/fusion/lsi/mpi_sas.h
Next file: linux-2.4.27/drivers/message/fusion/lsi/mpi_targ.h
Previous file: linux-2.4.27/drivers/message/fusion/lsi/mpi_raid.h
Back to the patch index
Back to the overall index
- Lines: 182
- Date:
2004-08-07 16:26:04.911357338 -0700
- Orig file:
linux-2.4.26/drivers/message/fusion/lsi/mpi_sas.h
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.26/drivers/message/fusion/lsi/mpi_sas.h linux-2.4.27/drivers/message/fusion/lsi/mpi_sas.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2003 LSI Logic Corporation.
+ *
+ *
+ * Name: mpi_sas.h
+ * Title: MPI Serial Attached SCSI structures and definitions
+ * Creation Date: April 23, 2003
+ *
+ * mpi_sas.h Version: 01.05.xx
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * xx-yy-zz 01.05.01 Original release.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI_SAS_H
+#define MPI_SAS_H
+
+/*****************************************************************************
+*
+* S e r i a l A t t a c h e d S C S I M e s s a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/* Serial Management Protocol Passthrough Request */
+/****************************************************************************/
+
+typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
+{
+ U8 PassthroughFlags; /* 00h */
+ U8 PhysicalPort; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 RequestDataLength; /* 04h */
+ U8 ConnectionRate; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 Reserved1; /* 0Ch */
+ U64 SASAddress; /* 10h */
+ U32 Reserved2; /* 18h */
+ U32 Reserved3; /* 1Ch */
+ SGE_SIMPLE_UNION SGL; /* 20h */
+} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
+ SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
+
+#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
+
+#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
+#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
+
+
+/* Serial Management Protocol Passthrough Reply */
+typedef struct _MSG_SMP_PASSTHROUGH_REPLY
+{
+ U8 PassthroughFlags; /* 00h */
+ U8 PhysicalPort; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 ResponseDataLength; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 Reserved2; /* 0Ch */
+ U8 SASStatus; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 Reserved3; /* 14h */
+ U8 ResponseData[4]; /* 18h */
+} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
+ SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
+
+#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
+
+/* values for the SASStatus field */
+#define MPI_SASSTATUS_SUCCESS (0x00)
+#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
+#define MPI_SASSTATUS_INVALID_FRAME (0x02)
+#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
+#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
+#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
+#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
+#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
+#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
+#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
+#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
+#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
+#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
+#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
+#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
+#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
+#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
+#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
+#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
+#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
+#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
+
+
+/*
+ * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ * data and SAS IO Unit Configuration pages.
+ */
+#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
+#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
+#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
+#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
+#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
+#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
+#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
+#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
+#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
+#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
+#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
+
+#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
+#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
+#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
+#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
+#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
+
+
+/****************************************************************************/
+/* SAS IO Unit Control Request */
+/****************************************************************************/
+
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
+{
+ U8 Operation; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 TargetID; /* 0Ch */
+ U8 Bus; /* 0Dh */
+ U8 PhyNum; /* 0Eh */
+ U8 Reserved4; /* 0Fh */
+ U32 Reserved5; /* 10h */
+ U64 SASAddress; /* 14h */
+ U32 Reserved6; /* 1Ch */
+} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
+ SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
+
+/* values for the ... field */
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
+#define MPI_SAS_OP_CLEAR_ALL (0x02)
+#define MPI_SAS_OP_MAP (0x03)
+#define MPI_SAS_OP_MOVE (0x04)
+#define MPI_SAS_OP_CLEAR (0x05)
+#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+
+
+/* SAS IO Unit Control Reply */
+typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
+{
+ U8 Operation; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U16 Reserved2; /* 04h */
+ U8 Reserved3; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U16 Reserved4; /* 0Ch */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
+ SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
+
+#endif
+
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)