patch-2.4.27 linux-2.4.27/drivers/message/fusion/lsi/mpi.h
Next file: linux-2.4.27/drivers/message/fusion/lsi/mpi_cnfg.h
Previous file: linux-2.4.27/drivers/message/fusion/isense.c
Back to the patch index
Back to the overall index
- Lines: 235
- Date:
2004-08-07 16:26:04.900356886 -0700
- Orig file:
linux-2.4.26/drivers/message/fusion/lsi/mpi.h
- Orig date:
2004-02-18 05:36:31.000000000 -0800
diff -urN linux-2.4.26/drivers/message/fusion/lsi/mpi.h linux-2.4.27/drivers/message/fusion/lsi/mpi.h
@@ -2,11 +2,11 @@
* Copyright (c) 2000-2003 LSI Logic Corporation.
*
*
- * Name: MPI.H
+ * Name: mpi.h
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * MPI.H Version: 01.02.10
+ * mpi.h Version: 01.05.xx
*
* Version History
* ---------------
@@ -66,7 +66,7 @@
*****************************************************************************/
#define MPI_VERSION_MAJOR (0x01)
-#define MPI_VERSION_MINOR (0x02)
+#define MPI_VERSION_MINOR (0x05)
#define MPI_VERSION_MAJOR_MASK (0xFF00)
#define MPI_VERSION_MAJOR_SHIFT (8)
#define MPI_VERSION_MINOR_MASK (0x00FF)
@@ -77,10 +77,12 @@
#define MPI_VERSION_01_00 (0x0100)
#define MPI_VERSION_01_01 (0x0101)
#define MPI_VERSION_01_02 (0x0102)
+#define MPI_VERSION_01_03 (0x0103)
+#define MPI_VERSION_01_05 (0x0105)
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x0C)
+#define MPI_HEADER_VERSION_UNIT (0x00)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
@@ -175,6 +177,8 @@
#define MPI_REPLY_POST_FIFO_OFFSET (0x00000044)
#define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044)
+#define MPI_HI_PRI_REQUEST_QUEUE_OFFSET (0x00000048)
+
/*****************************************************************************
@@ -234,10 +238,6 @@
#define MPI_FUNCTION_TARGET_ASSIST (0x0B)
#define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C)
#define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D)
-#define MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC (0x0E) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC (0x0F) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC (0x10) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_ABORT (0x11) /* obsolete name */
#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E)
#define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F)
#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10)
@@ -255,16 +255,46 @@
#define MPI_FUNCTION_MAILBOX (0x19)
+#define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A)
+#define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
+
+#define MPI_DIAG_BUFFER_POST (0x1D)
+#define MPI_DIAG_RELEASE (0x1E)
+
+#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
+
#define MPI_FUNCTION_LAN_SEND (0x20)
#define MPI_FUNCTION_LAN_RECEIVE (0x21)
#define MPI_FUNCTION_LAN_RESET (0x22)
+#define MPI_FUNCTION_INBAND_BUFFER_POST (0x28)
+#define MPI_FUNCTION_INBAND_SEND (0x29)
+#define MPI_FUNCTION_INBAND_RSP (0x2A)
+#define MPI_FUNCTION_INBAND_ABORT (0x2B)
+
#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
#define MPI_FUNCTION_IO_UNIT_RESET (0x41)
#define MPI_FUNCTION_HANDSHAKE (0x42)
#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43)
+/* standard version format */
+typedef struct _MPI_VERSION_STRUCT
+{
+ U8 Dev; /* 00h */
+ U8 Unit; /* 01h */
+ U8 Minor; /* 02h */
+ U8 Major; /* 03h */
+} MPI_VERSION_STRUCT, MPI_POINTER PTR_MPI_VERSION_STRUCT,
+ MpiVersionStruct_t, MPI_POINTER pMpiVersionStruct;
+
+typedef union _MPI_VERSION_FORMAT
+{
+ MPI_VERSION_STRUCT Struct;
+ U32 Word;
+} MPI_VERSION_FORMAT, MPI_POINTER PTR_MPI_VERSION_FORMAT,
+ MpiVersionFormat_t, MPI_POINTER pMpiVersionFormat_t;
+
/*****************************************************************************
*
@@ -577,44 +607,54 @@
/* Common IOCStatus values for all replies */
/****************************************************************************/
-#define MPI_IOCSTATUS_SUCCESS (0x0000)
-#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001)
-#define MPI_IOCSTATUS_BUSY (0x0002)
-#define MPI_IOCSTATUS_INVALID_SGL (0x0003)
-#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004)
-#define MPI_IOCSTATUS_RESERVED (0x0005)
-#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
-#define MPI_IOCSTATUS_INVALID_FIELD (0x0007)
-#define MPI_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI_IOCSTATUS_SUCCESS (0x0000)
+#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI_IOCSTATUS_BUSY (0x0002)
+#define MPI_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI_IOCSTATUS_RESERVED (0x0005)
+#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
/****************************************************************************/
/* Config IOCStatus values */
/****************************************************************************/
-#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
-#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
-#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
-#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
-#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
-#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
/****************************************************************************/
/* SCSIIO Reply (SPI & FCP) initiator values */
/****************************************************************************/
-#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
-#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041)
-#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042)
-#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
-#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
-#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
-#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
-#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
-#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
-#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
-#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
-#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
-#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041)
+#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042)
+#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
+#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
+#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+
+/****************************************************************************/
+/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_EEDP_CRC_ERROR (0x004D)
+#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR (0x004E)
+#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
/****************************************************************************/
/* SCSI (SPI & FCP) target values */
@@ -631,7 +671,7 @@
#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B)
/****************************************************************************/
-/* Additional FCP target values */
+/* Additional FCP target values (obsolete) */
/****************************************************************************/
#define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */
@@ -662,6 +702,25 @@
#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086)
#define MPI_IOCSTATUS_LAN_CANCELED (0x0087)
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+
+/****************************************************************************/
+/* Inband values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_INBAND_ABORTED (0x0098)
+#define MPI_IOCSTATUS_INBAND_NO_CONNECTION (0x0099)
+
+/****************************************************************************/
+/* Diagnostic Tools values */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
+
/****************************************************************************/
/* IOCStatus flag to indicate that log info is available */
@@ -675,9 +734,12 @@
/****************************************************************************/
#define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000)
+#define MPI_IOCLOGINFO_TYPE_SHIFT (28)
#define MPI_IOCLOGINFO_TYPE_NONE (0x0)
#define MPI_IOCLOGINFO_TYPE_SCSI (0x1)
#define MPI_IOCLOGINFO_TYPE_FC (0x2)
+#define MPI_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI_IOCLOGINFO_TYPE_ISCSI (0x4)
#define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)