patch-2.4.26 linux-2.4.26/drivers/usb/gadget/zero.c

• Lines: 376
• Date: 2004-04-14 06:05:32.000000000 -0700
• Orig file: linux-2.4.25/drivers/usb/gadget/zero.c
• Orig date: 2004-02-18 05:36:31.000000000 -0800

diff -urN linux-2.4.25/drivers/usb/gadget/zero.c linux-2.4.26/drivers/usb/gadget/zero.c
@@ -1,7 +1,7 @@
 /*
  * zero.c -- Gadget Zero, for USB development
  *
- * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2004 David Brownell
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -101,6 +101,11 @@
 /*-------------------------------------------------------------------------*/
 
 /*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ */
+
+/*
  * hardware-specific configuration, controlled by which device
  * controller driver was configured.
  *
@@ -108,11 +113,6 @@
  * DRIVER_VERSION_NUM ... alerts the host side driver to differences
  * EP_*_NAME ... which endpoints do we use for which purpose?
  * EP_*_NUM ... numbers for them (often limited by hardware)
- * HIGHSPEED ... define if ep0 and descriptors need high speed support
- * MAX_USB_POWER ... define if we use other than 100 mA bus current
- * SELFPOWER ... if we can run on bus power, zero
- * WAKEUP ... if hardware supports remote wakeup AND we will issue the
- * 	usb_gadget_wakeup() call to initiate it, USB_CONFIG_ATT_WAKEUP
  *
  * add other defines for other portability issues, like hardware that
  * for some reason doesn't handle full speed bulk maxpacket of 64.
@@ -136,9 +136,6 @@
 #define EP_OUT_NUM	2
 static const char EP_IN_NAME [] = "ep-b";
 #define EP_IN_NUM	2
-#define HIGHSPEED
-/* specific hardware configs could be bus-powered */
-/* supports remote wakeup, but this driver doesn't */
 #endif
 
 /*
@@ -159,8 +156,6 @@
 #define EP_OUT_NUM	12
 static const char EP_IN_NAME [] = "ep11in-bulk";
 #define EP_IN_NUM	11
-/* doesn't support bus-powered operation */
-/* supports remote wakeup, but this driver doesn't */
 #endif
 
 /*
@@ -181,8 +176,6 @@
 #define EP_OUT_NUM	1
 static const char EP_IN_NAME [] = "ep2in-bulk";
 #define EP_IN_NUM	2
-/* doesn't support bus-powered operation */
-/* doesn't support remote wakeup? */
 #endif
 
 /*
@@ -197,7 +190,6 @@
 #define EP_OUT_NUM	1
 static const char EP_IN_NAME [] = "ep2-bulk";
 #define EP_IN_NUM	2
-/* doesn't support remote wakeup */
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -206,30 +198,6 @@
 #	error Configure some USB peripheral controller driver!
 #endif
 
-/* power usage is config specific.
- * hardware that supports remote wakeup defaults to disabling it.
- */
-
-#ifndef	SELFPOWER
-/* default: say we're self-powered */
-#define SELFPOWER USB_CONFIG_ATT_SELFPOWER
-/* else:
- * - SELFPOWER value must be zero
- * - MAX_USB_POWER may be nonzero.
- */
-#endif
-
-#ifndef	MAX_USB_POWER
-/* any hub supports this steady state bus power consumption */
-#define MAX_USB_POWER	100	/* mA */
-#endif
-
-#ifndef	WAKEUP
-/* default: this driver won't do remote wakeup */
-#define WAKEUP		0
-/* else value must be USB_CONFIG_ATT_WAKEUP */
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 /* big enough to hold our biggest descriptor */
@@ -284,8 +252,8 @@
 /*
  * Normally the "loopback" configuration is second (index 1) so
  * it's not the default.  Here's where to change that order, to
- * work better with hosts (like Linux ... for now!) where config
- * changes are problematic.
+ * work better with hosts where config changes are problematic.
+ * Or controllers (like superh) that only support one config.
  */
 static int loopdefault = 0;
 
@@ -306,7 +274,7 @@
 
 /* Thanks to NetChip Technologies for donating this product ID.
  *
- * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  * Instead:  allocate your own, using normal USB-IF procedures.
  */
 #define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
@@ -358,8 +326,8 @@
 	.bNumInterfaces =	1,
 	.bConfigurationValue =	CONFIG_SOURCE_SINK,
 	.iConfiguration =	STRING_SOURCE_SINK,
-	.bmAttributes =		USB_CONFIG_ATT_ONE | SELFPOWER | WAKEUP,
-	.bMaxPower =		(MAX_USB_POWER + 1) / 2,
+	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower =		1,	/* self-powered */
 };
 
 static const struct usb_config_descriptor
@@ -371,8 +339,8 @@
 	.bNumInterfaces =	1,
 	.bConfigurationValue =	CONFIG_LOOPBACK,
 	.iConfiguration =	STRING_LOOPBACK,
-	.bmAttributes =		USB_CONFIG_ATT_ONE | SELFPOWER | WAKEUP,
-	.bMaxPower =		(MAX_USB_POWER + 1) / 2,
+	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower =		1,	/* self-powered */
 };
 
 /* one interface in each configuration */
@@ -419,7 +387,21 @@
 	.wMaxPacketSize =	__constant_cpu_to_le16 (64),
 };
 
-#ifdef	HIGHSPEED
+static const struct usb_descriptor_header *fs_source_sink_function [] = {
+	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	0,
+};
+
+static const struct usb_descriptor_header *fs_loopback_function [] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	0,
+};
+
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 
 /*
  * usb 2.0 devices need to expose both high speed and full speed
@@ -430,22 +412,20 @@
  * for the config descriptor.
  */
 
-static const struct usb_endpoint_descriptor
+static struct usb_endpoint_descriptor
 hs_source_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
-	.bEndpointAddress =	EP_IN_NUM | USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	__constant_cpu_to_le16 (512),
 };
 
-static const struct usb_endpoint_descriptor
+static struct usb_endpoint_descriptor
 hs_sink_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
-	.bEndpointAddress =	EP_OUT_NUM,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	__constant_cpu_to_le16 (512),
 };
@@ -461,6 +441,20 @@
 	.bNumConfigurations =	2,
 };
 
+static const struct usb_descriptor_header *hs_source_sink_function [] = {
+	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	0,
+};
+
+static const struct usb_descriptor_header *hs_loopback_function [] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	0,
+};
+
 /* maxpacket and other transfer characteristics vary by speed. */
 #define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
 
@@ -469,13 +463,14 @@
 /* if there's no high speed support, maxpacket doesn't change. */
 #define ep_desc(g,hs,fs) fs
 
-#endif	/* !HIGHSPEED */
+#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
 
+static char				manufacturer [40];
 static char				serial [40];
 
 /* static strings, in iso 8859/1 */
 static struct usb_string		strings [] = {
-	{ STRING_MANUFACTURER, UTS_SYSNAME " " UTS_RELEASE " with " CHIP, },
+	{ STRING_MANUFACTURER, manufacturer, },
 	{ STRING_PRODUCT, longname, },
 	{ STRING_SERIAL, serial, },
 	{ STRING_LOOPBACK, loopback, },
@@ -507,60 +502,42 @@
  * device?)
  */
 static int
-config_buf (enum usb_device_speed speed,
+config_buf (struct usb_gadget *gadget,
 		u8 *buf, u8 type, unsigned index)
 {
-	int		is_source_sink;
-	const unsigned	config_len = USB_DT_CONFIG_SIZE
-				+ USB_DT_INTERFACE_SIZE
-				+ 2 * USB_DT_ENDPOINT_SIZE;
-#ifdef HIGHSPEED
-	int		hs;
+	int				is_source_sink;
+	int				len;
+	const struct usb_descriptor_header **function;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+	int				hs = (gadget->speed == USB_SPEED_HIGH);
 #endif
+
 	/* two configurations will always be index 0 and index 1 */
 	if (index > 1)
 		return -EINVAL;
-	if (config_len > USB_BUFSIZ)
-		return -EDOM;
 	is_source_sink = loopdefault ? (index == 1) : (index == 0);
 
-	/* config (or other speed config) */
-	if (is_source_sink)
-		memcpy (buf, &source_sink_config, USB_DT_CONFIG_SIZE);
-	else
-		memcpy (buf, &loopback_config, USB_DT_CONFIG_SIZE);
-	buf [1] = type;
-	((struct usb_config_descriptor *) buf)->wTotalLength
-		= __constant_cpu_to_le16 (config_len);
-	buf += USB_DT_CONFIG_SIZE;
-
-	/* one interface */
-	if (is_source_sink)
-		memcpy (buf, &source_sink_intf, USB_DT_INTERFACE_SIZE);
-	else
-		memcpy (buf, &loopback_intf, USB_DT_INTERFACE_SIZE);
-	buf += USB_DT_INTERFACE_SIZE;
-
-	/* the endpoints in that interface (at that speed) */
-#ifdef HIGHSPEED
-	hs = (speed == USB_SPEED_HIGH);
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	if (type == USB_DT_OTHER_SPEED_CONFIG)
 		hs = !hs;
-	if (hs) {
-		memcpy (buf, &hs_source_desc, USB_DT_ENDPOINT_SIZE);
-		buf += USB_DT_ENDPOINT_SIZE;
-		memcpy (buf, &hs_sink_desc, USB_DT_ENDPOINT_SIZE);
-		buf += USB_DT_ENDPOINT_SIZE;
-	} else
+	if (hs)
+		function = is_source_sink
+			? hs_source_sink_function
+			: hs_loopback_function;
+	else
 #endif
-	{
-		memcpy (buf, &fs_source_desc, USB_DT_ENDPOINT_SIZE);
-		buf += USB_DT_ENDPOINT_SIZE;
-		memcpy (buf, &fs_sink_desc, USB_DT_ENDPOINT_SIZE);
-		buf += USB_DT_ENDPOINT_SIZE;
-	}
-
-	return config_len;
+		function = is_source_sink
+			? fs_source_sink_function
+			: fs_loopback_function;
+
+	len = usb_gadget_config_buf (is_source_sink
+					? &source_sink_config
+					: &loopback_config,
+			buf, USB_BUFSIZ, function);
+	if (len < 0)
+		return len;
+	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+	return len;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1024,17 +1001,21 @@
 			value = min (ctrl->wLength, (u16) sizeof device_desc);
 			memcpy (req->buf, &device_desc, value);
 			break;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 		case USB_DT_DEVICE_QUALIFIER:
+			if (!gadget->is_dualspeed)
+				break;
 			value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
 			memcpy (req->buf, &dev_qualifier, value);
 			break;
 
 		case USB_DT_OTHER_SPEED_CONFIG:
+			if (!gadget->is_dualspeed)
+				break;
 			// FALLTHROUGH
-#endif /* HIGHSPEED */
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
 		case USB_DT_CONFIG:
-			value = config_buf (gadget->speed, req->buf,
+			value = config_buf (gadget, req->buf,
 					ctrl->wValue >> 8,
 					ctrl->wValue & 0xff);
 			if (value >= 0)
@@ -1217,14 +1198,26 @@
 	dev->req->complete = zero_setup_complete;
 
 	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-#ifdef HIGHSPEED
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	/* assume ep0 uses the same value for both speeds ... */
 	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+
+	/* and that all endpoints are dual-speed */
+	hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+	hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
 #endif
 
 	gadget->ep0->driver_data = dev;
 
 	INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
+	INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+		EP_OUT_NAME, EP_IN_NAME);
+
+	snprintf (manufacturer, sizeof manufacturer,
+		UTS_SYSNAME " " UTS_RELEASE " with %s",
+		gadget->name);
+
 	return 0;
 
 enomem:
@@ -1235,7 +1228,7 @@
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver zero_driver = {
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	.speed		= USB_SPEED_HIGH,
 #else
 	.speed		= USB_SPEED_FULL,