patch-2.4.26 linux-2.4.26/drivers/net/sk98lin/ski2c.c

• Lines: 229
• Date: 2004-04-14 06:05:30.000000000 -0700
• Orig file: linux-2.4.25/drivers/net/sk98lin/ski2c.c
• Orig date: 2004-02-18 05:36:31.000000000 -0800

diff -urN linux-2.4.25/drivers/net/sk98lin/ski2c.c linux-2.4.26/drivers/net/sk98lin/ski2c.c
@@ -2,8 +2,6 @@
  *
  * Name:	ski2c.c
  * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.59 $
- * Date:	$Date: 2003/10/20 09:07:25 $
  * Purpose:	Functions to access Voltage and Temperature Sensor
  *
  ******************************************************************************/
@@ -22,219 +20,6 @@
  *
  ******************************************************************************/
 
-/******************************************************************************
- *
- * History:
- *
- *	$Log: ski2c.c,v $
- *	Revision 1.59  2003/10/20 09:07:25  rschmidt
- *	Added cast SK_U32 in SkI2cWrite() to avoid compiler warning.
- *	Editorial changes.
- *	
- *	Revision 1.58  2003/09/23 09:22:53  malthoff
- *	Parameter I2cDevSize added in SkI2cRead and SkI2cWrite to
- *	support larger devices on the TWSI bus.
- *	
- *	Revision 1.57  2003/01/28 09:17:38  rschmidt
- *	Fixed handling for sensors on YUKON Fiber.
- *	Editorial changes.
- *	
- *	Revision 1.56  2002/12/19 14:20:41  rschmidt
- *	Added debugging code in SkI2cWait().
- *	Replaced all I2C-write operations with function SkI2cWrite().
- *	Fixed compiler warning because of uninitialized 'Time' in SkI2cEvent().
- *	Editorial changes.
- *	
- *	Revision 1.55  2002/10/15 07:23:55  rschmidt
- *	Added setting of the GIYukon32Bit bool variable to distinguish
- *	32-bit adapters.
- *	Editorial changes (TWSI).
- *	
- *	Revision 1.54  2002/08/13 09:05:06  rschmidt
- *	Added new thresholds if VAUX is not available (GIVauxAvail).
- *	Merged defines for PHY PLL 3V3 voltage (A and B).
- *	Editorial changes.
- *	
- *	Revision 1.53  2002/08/08 11:04:53  rwahl
- *	Added missing comment for revision 1.51
- *	
- *	Revision 1.52  2002/08/08 10:09:02  jschmalz
- *	Sensor init state caused wrong error log entry
- *	
- *	Revision 1.51  2002/08/06 09:43:03  jschmalz
- *	Extensions and changes for Yukon
- *	
- *	Revision 1.50  2002/08/02 12:09:22  rschmidt
- *	Added support for YUKON sensors.
- *	Editorial changes.
- *	
- *	Revision 1.49  2002/07/30 11:07:52  rschmidt
- *	Replaced MaxSens init by update for Copper in SkI2cInit1(),
- *	because it was already initialized in SkI2cInit0().
- *	Editorial changes.
- *	
- *	Revision 1.48  2001/08/16 12:44:33  afischer
- *	LM80 sensor init values corrected
- *	
- *	Revision 1.47  2001/04/05 11:38:09  rassmann
- *	Set SenState to idle in SkI2cWaitIrq().
- *	Changed error message in SkI2cWaitIrq().
- *	
- *	Revision 1.46  2001/04/02 14:03:35  rassmann
- *	Changed pAC to IoC in SK_IN32().
- *	
- *	Revision 1.45  2001/03/21 12:12:49  rassmann
- *	Resetting I2C_READY interrupt in SkI2cInit1().
- *	
- *	Revision 1.44  2000/08/07 15:49:03  gklug
- *	Fix: SK_INFAST only in NetWare driver.
- *	
- *	Revision 1.43  2000/08/03 14:28:17  rassmann
- *	Added function to wait for I2C being ready before resetting the board.
- *	Replaced one duplicate "out of range" message with correct one.
- *	
- *	Revision 1.42  1999/11/22 13:35:12  cgoos
- *	Changed license header to GPL.
- *	
- *	Revision 1.41  1999/09/14 14:11:30  malthoff
- *	The 1000BT Dual Link adapter has got only one Fan.
- *	The second Fan has been removed.
- *	
- *	Revision 1.40  1999/05/27 13:37:27  malthoff
- *	Set divisor of 1 for fan count calculation.
- *	
- *	Revision 1.39  1999/05/20 14:54:43  malthoff
- *	I2c.DummyReads is not used in Diagnostics.
- *	
- *	Revision 1.38  1999/05/20 09:20:56  cgoos
- *	Changes for 1000Base-T (up to 9 sensors and fans).
- *	
- *	Revision 1.37  1999/03/25 15:11:36  gklug
- *	fix: reset error flag if sensor reads correct value
- *	
- *	Revision 1.36  1999/01/07 14:11:16  gklug
- *	fix: break added
- *	
- *	Revision 1.35  1999/01/05 15:31:49  gklug
- *	fix: CLEAR STAT command is now added correctly
- *	
- *	Revision 1.34  1998/12/01 13:45:16  gklug
- *	fix: introduced Init level, because we don't need reinits
- *	
- *	Revision 1.33  1998/11/09 14:54:25  malthoff
- *	Modify I2C Transfer Timeout handling for Diagnostics.
- *	
- *	Revision 1.32  1998/11/03 06:54:35  gklug
- *	fix: Need dummy reads at the beginning to init sensors
- *
- *	Revision 1.31  1998/11/03 06:42:42  gklug
- *	fix: select correctVIO range only if between warning levels
- *	
- *	Revision 1.30  1998/11/02 07:36:53  gklug
- *	fix: Error should not include WARNING message
- *	
- *	Revision 1.29  1998/10/30 15:07:43  malthoff
- *	Disable 'I2C does not compelete' error log for diagnostics.
- *	
- *	Revision 1.28  1998/10/22 09:48:11  gklug
- *	fix: SysKonnectFileId typo
- *	
- *	Revision 1.27  1998/10/20 09:59:46  gklug
- *	add: parameter to SkOsGetTime
- *	
- *	Revision 1.26  1998/10/09 06:10:59  malthoff
- *	Remove ID_sccs by SysKonnectFileId.
- *	
- *	Revision 1.25  1998/09/08 12:40:26  gklug
- *	fix: syntax error in if clause
- *	
- *	Revision 1.24  1998/09/08 12:19:42  gklug
- *	chg: INIT Level checking
- *	
- *	Revision 1.23  1998/09/08 07:37:20  gklug
- *	fix: log error if PCI_IO voltage sensor could not be initialized
- *	
- *	Revision 1.22  1998/09/04 08:30:03  malthoff
- *	Bugfixes during SK_DIAG testing:
- *	- correct NS2BCLK() macro
- *	- correct SkI2cSndDev()
- *	- correct SkI2cWait() loop waiting for an event
- *	
- *	Revision 1.21  1998/08/27 14:46:01  gklug
- *	chg: if-then-else replaced by switch
- *
- *	Revision 1.20  1998/08/27 14:40:07  gklug
- *	test: integral types
- *	
- *	Revision 1.19  1998/08/25 07:51:54  gklug
- *	fix: typos for compiling
- *	
- *	Revision 1.18  1998/08/25 06:12:24  gklug
- *	add: count errors and warnings
- *	fix: check not the sensor state but the ErrFlag!
- *	
- *	Revision 1.17  1998/08/25 05:56:48  gklug
- *	add: CheckSensor function
- *	
- *	Revision 1.16  1998/08/20 11:41:10  gklug
- *	chg: omit STRCPY macro by using char * as Sensor Description
- *	
- *	Revision 1.15  1998/08/20 11:37:35  gklug
- *	chg: change Ioc to IoC
- *	
- *	Revision 1.14  1998/08/20 11:32:52  gklug
- *	fix: Para compile error
- *	
- *	Revision 1.13  1998/08/20 11:27:41  gklug
- *	fix: Compile bugs with new awrning constants
- *	
- *	Revision 1.12  1998/08/20 08:53:05  gklug
- *	fix: compiler errors
- *	add: Threshold values
- *	
- *	Revision 1.11  1998/08/19 12:39:22  malthoff
- *	Compiler Fix: Some names have changed.
- *	
- *	Revision 1.10  1998/08/19 12:20:56  gklug
- *	fix: remove struct from C files (see CCC)
- *	
- *	Revision 1.9  1998/08/19 06:28:46  malthoff
- *	SkOsGetTime returns SK_U64 now.
- *	
- *	Revision 1.8  1998/08/17 13:53:33  gklug
- *	fix: Parameter of event function and its result
- *	
- *	Revision 1.7  1998/08/17 07:02:15  malthoff
- *	Modify the functions for accessing the I2C SW Registers.
- *	Modify SkI2cWait().
- *	Put Lm80RcvReg into sklm80.c
- *	Remove Compiler Errors.
- *	
- *	Revision 1.6  1998/08/14 07:13:20  malthoff
- *	remove pAc with pAC
- *	remove smc with pAC
- *	change names to new convention
- *
- *	Revision 1.5  1998/08/14 06:24:49  gklug
- *	add: init level 1 and 2
- *
- *	Revision 1.4  1998/08/12 14:31:12  gklug
- *	add: error log for unknown event
- *
- *	Revision 1.3  1998/08/12 13:37:04  gklug
- *	add: Init 0 function
- *
- *	Revision 1.2  1998/08/11 07:27:15  gklug
- *	add: functions of the interface
- *	adapt rest of source to C coding Conventions
- *	rmv: unnecessary code taken from Mona Lisa
- *
- *	Revision 1.1  1998/06/19 14:28:43  malthoff
- *	Created. Sources taken from ML Projekt.
- *	Sources have to be reworked for GE.
- *
- ******************************************************************************/
-
 /*
  *	I2C Protocol
  */