patch-2.4.25 linux-2.4.25/include/asm-mips/sgi/pi1.h

• Lines: 72
• Date: 2004-02-18 05:36:32.000000000 -0800
• Orig file: linux-2.4.24/include/asm-mips/sgi/pi1.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.24/include/asm-mips/sgi/pi1.h linux-2.4.25/include/asm-mips/sgi/pi1.h
@@ -0,0 +1,71 @@
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _ctrl[3];
+	volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N	0x01
+#define PI1_CTRL_AFD_N		0x02
+#define PI1_CTRL_INIT_N		0x04
+#define PI1_CTRL_SLIN_N		0x08
+#define PI1_CTRL_IRQ_ENA	0x10
+#define PI1_CTRL_DIR		0x20
+#define PI1_CTRL_SEL		0x40
+	u8 _status[3];
+	volatile u8 status;
+#define PI1_STAT_DEVID		0x03	/* bits 0-1 */
+#define PI1_STAT_NOINK		0x04	/* SGI MODE only */
+#define PI1_STAT_ERROR		0x08
+#define PI1_STAT_ONLINE		0x10
+#define PI1_STAT_PE		0x20
+#define PI1_STAT_ACK		0x40
+#define PI1_STAT_BUSY		0x80
+	u8 _dmactrl[3];
+	volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY	0x01    /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT	0x02    /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE	0x00    /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE	0x04    /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE	0x08    /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE	0x0c    /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE	0x10    /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR	0x20    /* clear fifo W/O */
+#define PI1_DMACTRL_READ	0x40    /* read */
+#define PI1_DMACTRL_RUN		0x80    /* pedal to the metal */
+	u8 _intstat[3];
+	volatile u8 intstat;
+#define PI1_INTSTAT_ACK		0x04
+#define PI1_INTSTAT_FEMPTY	0x08
+#define PI1_INTSTAT_NOINK	0x10
+#define PI1_INTSTAT_ONLINE	0x20
+#define PI1_INTSTAT_ERR		0x40
+#define PI1_INTSTAT_PE		0x80
+	u8 _intmask[3];
+	volatile u8 intmask;		/* enabled low, reset high*/
+#define PI1_INTMASK_ACK		0x04
+#define PI1_INTMASK_FIFO_EMPTY	0x08
+#define PI1_INTMASK_NOINK	0x10
+#define PI1_INTMASK_ONLINE	0x20
+#define PI1_INTMASK_ERR		0x40
+#define PI1_INTMASK_PE		0x80
+	u8 _timer1[3];
+	volatile u8 timer1;
+#define PI1_TIME1		0x27
+	u8 _timer2[3];
+	volatile u8 timer2;
+#define PI1_TIME2		0x13
+	u8 _timer3[3];
+	volatile u8 timer3;
+#define PI1_TIME3		0x10
+	u8 _timer4[3];
+	volatile u8 timer4;
+#define PI1_TIME4		0x00
+};
+
+#endif