patch-2.4.22 linux-2.4.22/include/asm-mips64/dec/kn02.h

• Lines: 107
• Date: 2003-08-25 04:44:44.000000000 -0700
• Orig file: linux-2.4.21/include/asm-mips64/dec/kn02.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/include/asm-mips64/dec/kn02.h linux-2.4.22/include/asm-mips64/dec/kn02.h
@@ -0,0 +1,106 @@
+/*
+ * Hardware info about DECstation 5000/200 systems (otherwise known as
+ * 3max or KN02).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN02_H
+#define __ASM_MIPS_DEC_KN02_H
+
+#ifndef __ASSEMBLY__
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#endif
+
+#include <asm/addrspace.h>
+#include <asm/dec/ecc.h>
+
+
+#define KN02_SLOT_BASE	KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_SIZE	0x00080000
+
+/*
+ * Address ranges decoded by the "system slot" logic for onboard devices.
+ */
+#define KN02_SYS_ROM	(0*KN02_SLOT_SIZE)	/* system board ROM */
+#define KN02_RES_1	(1*KN02_SLOT_SIZE)	/* unused */
+#define KN02_CHKSYN	(2*KN02_SLOT_SIZE)	/* ECC syndrome */
+#define KN02_ERRADDR	(3*KN02_SLOT_SIZE)	/* bus error address */
+#define KN02_DZ11	(4*KN02_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN02_RTC	(5*KN02_SLOT_SIZE)	/* DS1287 RTC */
+#define KN02_CSR	(6*KN02_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
+
+
+/*
+ * Some port addresses...
+ */
+#define KN02_DZ11_BASE	(KN02_SLOT_BASE + KN02_DZ11)	/* DZ11 */
+#define KN02_RTC_BASE	(KN02_SLOT_BASE + KN02_RTC)	/* RTC */
+#define KN02_CSR_BASE	(KN02_SLOT_BASE + KN02_CSR)	/* CSR */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN02_CSR_RES_28		(0xf<<28)	/* unused */
+#define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
+#define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
+#define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
+#define KN03_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
+#define KN03_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
+#define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN02_CSR_LEDIAG		(1<<12)		/* ECC diagn. latch strobe */
+#define KN02_CSR_TXDIS		(1<<11)		/* DZ11 transmit disable */
+#define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
+#define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
+#define KN03_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
+#define KN03_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02_CPU_INR_RES_6	6	/* unused */
+#define KN02_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN02_CPU_INR_RES_4	4	/* unused */
+#define KN02_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02_CPU_INR_CASCADE	2	/* CSR cascade */
+
+/*
+ * CSR interrupt bits.
+ */
+#define KN02_CSR_INR_DZ11	7	/* DZ11 (DC7085) serial */
+#define KN02_CSR_INR_LANCE	6	/* LANCE (Am7990) Ethernet */
+#define KN02_CSR_INR_ASC	5	/* ASC (NCR53C94) SCSI */
+#define KN02_CSR_INR_RES_4	4	/* unused */
+#define KN02_CSR_INR_RES_3	3	/* unused */
+#define KN02_CSR_INR_TC2	2	/* TURBOchannel slot #2 */
+#define KN02_CSR_INR_TC1	1	/* TURBOchannel slot #1 */
+#define KN02_CSR_INR_TC0	0	/* TURBOchannel slot #0 */
+
+
+#define KN02_IRQ_BASE		8	/* first IRQ assigned to CSR */
+#define KN02_IRQ_LINES		8	/* number of CSR interrupts */
+
+#define KN02_IRQ_NR(n)		((n) + KN02_IRQ_BASE)
+#define KN02_IRQ_MASK(n)	(1 << (n))
+#define KN02_IRQ_ALL		0xff
+
+
+#ifndef __ASSEMBLY__
+extern u32 cached_kn02_csr;
+extern spinlock_t kn02_lock;
+extern void init_kn02_irqs(int base);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02_H */