patch-2.4.22 linux-2.4.22/drivers/sound/i810_audio.c
Next file: linux-2.4.22/drivers/sound/ite8172.c
Previous file: linux-2.4.22/drivers/sound/hal2.h
Back to the patch index
Back to the overall index
- Lines: 296
- Date:
2003-08-25 04:44:42.000000000 -0700
- Orig file:
linux-2.4.21/drivers/sound/i810_audio.c
- Orig date:
2003-06-13 07:51:36.000000000 -0700
diff -urN linux-2.4.21/drivers/sound/i810_audio.c linux-2.4.22/drivers/sound/i810_audio.c
@@ -118,6 +118,9 @@
#ifndef PCI_DEVICE_ID_INTEL_ICH4
#define PCI_DEVICE_ID_INTEL_ICH4 0x24c5
#endif
+#ifndef PCI_DEVICE_ID_INTEL_ICH5
+#define PCI_DEVICE_ID_INTEL_ICH5 0x24d5
+#endif
#ifndef PCI_DEVICE_ID_INTEL_440MX
#define PCI_DEVICE_ID_INTEL_440MX 0x7195
#endif
@@ -273,6 +276,7 @@
INTELICH2,
INTELICH3,
INTELICH4,
+ INTELICH5,
SI7012,
NVIDIA_NFORCE,
AMD768,
@@ -286,6 +290,7 @@
"Intel ICH2",
"Intel ICH3",
"Intel ICH4",
+ "Intel ICH5",
"SiS 7012",
"NVIDIA nForce Audio",
"AMD 768",
@@ -304,7 +309,8 @@
{ 1, 0x0000 }, /* INTEL440MX */
{ 1, 0x0000 }, /* INTELICH2 */
{ 2, 0x0000 }, /* INTELICH3 */
- { 3, 0x0003 }, /* INTELICH4 */
+ { 3, 0x0003 }, /* INTELICH4 */
+ { 3, 0x0003 }, /* INTELICH5 */
/*@FIXME to be verified*/ { 2, 0x0000 }, /* SI7012 */
/*@FIXME to be verified*/ { 2, 0x0000 }, /* NVIDIA_NFORCE */
/*@FIXME to be verified*/ { 2, 0x0000 }, /* AMD768 */
@@ -324,6 +330,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH3},
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH5,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH5},
{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7012,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, SI7012},
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO,
@@ -420,6 +428,9 @@
/* The i810 has a certain amount of cross channel interaction
so we use a single per card lock */
spinlock_t lock;
+
+ /* Control AC97 access serialization */
+ spinlock_t ac97_lock;
/* PCI device stuff */
struct pci_dev * pci_dev;
@@ -548,80 +559,42 @@
* The DSP sample rate must already be set to a supported
* S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort.
*/
-static void i810_set_spdif_output(struct i810_state *state, int slots, int rate)
+static int i810_set_spdif_output(struct i810_state *state, int slots, int rate)
{
int vol;
int aud_reg;
+ int r = 0;
struct ac97_codec *codec = state->card->ac97_codec[0];
- if(!(state->card->ac97_features & 4)) {
-#ifdef DEBUG
- printk(KERN_WARNING "i810_audio: S/PDIF transmitter not available.\n");
-#endif
+ if(!codec->codec_ops->digital) {
state->card->ac97_status &= ~SPDIF_ON;
} else {
if ( slots == -1 ) { /* Turn off S/PDIF */
- aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
- i810_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
-
+ codec->codec_ops->digital(codec, 0, 0, 0);
/* If the volume wasn't muted before we turned on S/PDIF, unmute it */
if ( !(state->card->ac97_status & VOL_MUTED) ) {
aud_reg = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (aud_reg & ~VOL_MUTED));
}
state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON);
- return;
+ return 0;
}
vol = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
state->card->ac97_status = vol & VOL_MUTED;
-
- /* Set S/PDIF transmitter sample rate */
- aud_reg = i810_ac97_get(codec, AC97_SPDIF_CONTROL);
- switch ( rate ) {
- case 32000:
- aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_32K;
- break;
- case 44100:
- aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_44K;
- break;
- case 48000:
- aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_48K;
- break;
- default:
-#ifdef DEBUG
- printk(KERN_WARNING "i810_audio: %d sample rate not supported by S/PDIF.\n", rate);
-#endif
- /* turn off S/PDIF */
- aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
- i810_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
- state->card->ac97_status &= ~SPDIF_ON;
- return;
- }
-
- i810_ac97_set(codec, AC97_SPDIF_CONTROL, aud_reg);
- aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
- aud_reg = (aud_reg & AC97_EA_SLOT_MASK) | slots | AC97_EA_VRA | AC97_EA_SPDIF;
- i810_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
- state->card->ac97_status |= SPDIF_ON;
+ r = codec->codec_ops->digital(codec, slots, rate, 0);
- /* Check to make sure the configuration is valid */
- aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
- if ( ! (aud_reg & 0x0400) ) {
-#ifdef DEBUG
- printk(KERN_WARNING "i810_audio: S/PDIF transmitter configuration not valid (0x%04x).\n", aud_reg);
-#endif
-
- /* turn off S/PDIF */
- i810_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
+ if(r)
+ state->card->ac97_status |= SPDIF_ON;
+ else
state->card->ac97_status &= ~SPDIF_ON;
- return;
- }
+
/* Mute the analog output */
/* Should this only mute the PCM volume??? */
i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (vol | VOL_MUTED));
}
+ return r;
}
/* i810_set_dac_channels
@@ -2640,23 +2613,32 @@
static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg)
{
struct i810_card *card = dev->private_data;
+ u16 ret;
+
+ spin_lock(&card->ac97_lock);
if (card->use_mmio) {
- return i810_ac97_get_mmio(dev, reg);
+ ret = i810_ac97_get_mmio(dev, reg);
}
else {
- return i810_ac97_get_io(dev, reg);
+ ret = i810_ac97_get_io(dev, reg);
}
+ spin_unlock(&card->ac97_lock);
+
+ return ret;
}
static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data)
{
struct i810_card *card = dev->private_data;
+
+ spin_lock(&card->ac97_lock);
if (card->use_mmio) {
i810_ac97_set_mmio(dev, reg, data);
}
else {
i810_ac97_set_io(dev, reg, data);
}
+ spin_unlock(&card->ac97_lock);
}
@@ -2802,7 +2784,7 @@
*/
/* see i810_ac97_init for the next 7 lines (jsaw) */
inw(card->ac97base);
- if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4)
+ if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4 || card->pci_id == PCI_DEVICE_ID_INTEL_ICH5)
&& (card->use_mmio)) {
primary_codec_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
printk(KERN_INFO "i810_audio: Primary codec has ID %d\n",
@@ -2872,7 +2854,7 @@
possible IO channels. Bit 0:1 of SDM then holds the
last codec ID spoken to.
*/
- if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4)
+ if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4 || card->pci_id == PCI_DEVICE_ID_INTEL_ICH5)
&& (card->use_mmio)) {
ac97_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
printk(KERN_INFO "i810_audio: Connection %d with codec id %d\n",
@@ -2891,9 +2873,8 @@
printk(KERN_ERR "i810_audio: Primary codec not ready.\n");
}
- if ((codec = kmalloc(sizeof(struct ac97_codec), GFP_KERNEL)) == NULL)
+ if ((codec = ac97_alloc_codec()) == NULL)
return -ENOMEM;
- memset(codec, 0, sizeof(struct ac97_codec));
/* initialize some basic codec information, other fields will be filled
in ac97_probe_codec */
@@ -2912,7 +2893,7 @@
if(!i810_ac97_probe_and_powerup(card,codec)) {
printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", ac97_id);
- kfree(codec);
+ ac97_release_codec(codec);
break; /* it didn't work */
}
/* Store state information about S/PDIF transmitter */
@@ -2921,10 +2902,10 @@
/* Don't attempt to get eid until powerup is complete */
eid = i810_ac97_get(codec, AC97_EXTENDED_ID);
- if(eid==0xFFFFFF)
+ if(eid==0xFFFF)
{
printk(KERN_WARNING "i810_audio: no codec attached ?\n");
- kfree(codec);
+ ac97_release_codec(codec);
break;
}
@@ -2933,7 +2914,7 @@
if(codec->modem)
{
printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", ac97_id);
- kfree(codec);
+ ac97_release_codec(codec);
continue;
}
@@ -3016,7 +2997,7 @@
if ((codec->dev_mixer = register_sound_mixer(&i810_mixer_fops, -1)) < 0) {
printk(KERN_ERR "i810_audio: couldn't register mixer!\n");
- kfree(codec);
+ ac97_release_codec(codec);
break;
}
@@ -3110,10 +3091,17 @@
return -EIO;
if (pci_set_dma_mask(pci_dev, I810_DMA_MASK)) {
- printk(KERN_ERR "intel810: architecture does not support"
+ printk(KERN_ERR "i810_audio: architecture does not support"
" 32bit PCI busmaster DMA\n");
return -ENODEV;
}
+
+ if( pci_resource_start(pci_dev, 1) == 0)
+ {
+ /* MMIO only ICH5 .. here be dragons .. */
+ printk(KERN_ERR "i810_audio: Pure MMIO interfaces not yet supported.\n");
+ return -ENODEV;
+ }
if ((card = kmalloc(sizeof(struct i810_card), GFP_KERNEL)) == NULL) {
printk(KERN_ERR "i810_audio: out of memory\n");
@@ -3148,6 +3136,7 @@
card->pm_suspended=0;
#endif
spin_lock_init(&card->lock);
+ spin_lock_init(&card->ac97_lock);
devs = card;
pci_set_master(pci_dev);
@@ -3243,7 +3232,7 @@
for (i = 0; i < NR_AC97; i++)
if (card->ac97_codec[i] != NULL) {
unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
- kfree (card->ac97_codec[i]);
+ ac97_release_codec(card->ac97_codec[i]);
}
goto out_iospace;
}
@@ -3288,7 +3277,7 @@
for (i = 0; i < NR_AC97; i++)
if (card->ac97_codec[i] != NULL) {
unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
- kfree (card->ac97_codec[i]);
+ ac97_release_codec(card->ac97_codec[i]);
card->ac97_codec[i] = NULL;
}
unregister_sound_dsp(card->dev_audio);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)