patch-2.4.22 linux-2.4.22/drivers/ide/Makefile
Next file: linux-2.4.22/drivers/ide/ide-cd.c
Previous file: linux-2.4.22/drivers/ide/Config.in
Back to the patch index
Back to the overall index
- Lines: 81
- Date:
2003-08-25 04:44:41.000000000 -0700
- Orig file:
linux-2.4.21/drivers/ide/Makefile
- Orig date:
2003-06-13 07:51:33.000000000 -0700
diff -urN linux-2.4.21/drivers/ide/Makefile linux-2.4.22/drivers/ide/Makefile
@@ -8,7 +8,6 @@
# In the future, some of these should be built conditionally.
#
-O_TARGET := idedriver.o
export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o ide-probe.o ide-dma.o ide-lib.o setup-pci.o ide-io.o ide-disk.o
@@ -29,24 +28,27 @@
# Core IDE code - must come before legacy
-obj-$(CONFIG_BLK_DEV_IDE) += ide-probe.o ide-geometry.o ide-iops.o ide-taskfile.o ide.o ide-lib.o ide-io.o ide-default.o
-obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
-obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
-obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
+ide-core-objs := ide-iops.o ide-taskfile.o ide.o ide-lib.o ide-io.o ide-default.o ide-proc.o
+ide-detect-objs := ide-probe.o ide-geometry.o
+
ifeq ($(CONFIG_BLK_DEV_IDEPCI),y)
-obj-$(CONFIG_BLK_DEV_IDE) += setup-pci.o
+ide-core-objs += setup-pci.o
endif
ifeq ($(CONFIG_BLK_DEV_IDEDMA_PCI),y)
-obj-$(CONFIG_BLK_DEV_IDE) += ide-dma.o
+ide-core-objs += ide-dma.o
endif
-obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
+# Initialisation order:
+# Core sets up
+# Legacy drivers may register a callback
+# Drivers are pre initialised
+# Probe inits the drivers and driver callbacks
+# Raid scans the devices
-ifeq ($(CONFIG_BLK_DEV_IDE),y)
-obj-$(CONFIG_PROC_FS) += ide-proc.o
-endif
+obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
+
+obj-$(CONFIG_BLK_DEV_IDE_SIBYTE) += ide-sibyte.o
ifeq ($(CONFIG_BLK_DEV_IDE),y)
obj-y += legacy/idedriver-legacy.o
@@ -54,14 +56,33 @@
obj-y += arm/idedriver-arm.o
else
ifeq ($(CONFIG_BLK_DEV_HD_ONLY),y)
+ subdir-$(CONFIG_BLK_DEV_HD_ONLY) += legacy
obj-y += legacy/idedriver-legacy.o
endif
endif
+obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
+
+obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
+obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
+obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
+
+obj-$(CONFIG_BLK_DEV_IDE) += ide-detect.o
ifeq ($(CONFIG_BLK_DEV_IDE),y)
# RAID must be last of all
obj-y += raid/idedriver-raid.o
endif
+list-multi := ide-core.o ide-detect.o
+O_TARGET := idedriver.o
+
include $(TOPDIR)/Rules.make
+
+ide-core.o: $(ide-core-objs)
+ $(LD) -r -o $@ $(ide-core-objs)
+
+ide-detect.o: $(ide-detect-objs)
+ $(LD) -r -o $@ $(ide-detect-objs)
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)