patch-2.4.22 linux-2.4.22/arch/mips/sibyte/swarm/rtc_m41t81.c
Next file: linux-2.4.22/arch/mips/sibyte/swarm/rtc_xicor1241.c
Previous file: linux-2.4.22/arch/mips/sibyte/swarm/dbg_io.c
Back to the patch index
Back to the overall index
- Lines: 226
- Date:
2003-08-25 04:44:40.000000000 -0700
- Orig file:
linux-2.4.21/arch/mips/sibyte/swarm/rtc_m41t81.c
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.21/arch/mips/sibyte/swarm/rtc_m41t81.c linux-2.4.22/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+
+#include <asm/sibyte/64bit.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+/* M41T81 definitions */
+
+/*
+ * Register bits
+ */
+
+#define M41T81REG_SC_ST 0x80 /* stop bit */
+#define M41T81REG_HR_CB 0x40 /* century bit */
+#define M41T81REG_HR_CEB 0x80 /* century enable bit */
+#define M41T81REG_CTL_S 0x20 /* sign bit */
+#define M41T81REG_CTL_FT 0x40 /* frequency test bit */
+#define M41T81REG_CTL_OUT 0x80 /* output level */
+#define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */
+#define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */
+#define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */
+#define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */
+#define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */
+#define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */
+#define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */
+#define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */
+#define M41T81REG_AMO_SQWE 0x40 /* square wave enable */
+#define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */
+#define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */
+#define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */
+#define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */
+#define M41T81REG_AHR_HT 0x40 /* halt update bit */
+#define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */
+#define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */
+#define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */
+#define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */
+#define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */
+#define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */
+#define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */
+#define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */
+
+
+/*
+ * Register numbers
+ */
+
+#define M41T81REG_TSC 0x00 /* tenths/hundredths of second */
+#define M41T81REG_SC 0x01 /* seconds */
+#define M41T81REG_MN 0x02 /* minute */
+#define M41T81REG_HR 0x03 /* hour/century */
+#define M41T81REG_DY 0x04 /* day of week */
+#define M41T81REG_DT 0x05 /* date of month */
+#define M41T81REG_MO 0x06 /* month */
+#define M41T81REG_YR 0x07 /* year */
+#define M41T81REG_CTL 0x08 /* control */
+#define M41T81REG_WD 0x09 /* watchdog */
+#define M41T81REG_AMO 0x0A /* alarm: month */
+#define M41T81REG_ADT 0x0B /* alarm: date */
+#define M41T81REG_AHR 0x0C /* alarm: hour */
+#define M41T81REG_AMN 0x0D /* alarm: minute */
+#define M41T81REG_ASC 0x0E /* alarm: second */
+#define M41T81REG_FLG 0x0F /* flags */
+#define M41T81REG_SQW 0x13 /* square wave register */
+
+#define M41T81_CCR_ADDRESS 0x68
+#define SMB_CSR(reg) (KSEG1 | A_SMB_REGISTER(1, reg))
+
+static int m41t81_read(uint8_t addr)
+{
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ out64(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ out64((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE), SMB_CSR(R_SMB_START));
+
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ out64((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), SMB_CSR(R_SMB_START));
+
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ out64(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ return (in64(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int m41t81_write(uint8_t addr, int b)
+{
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ out64((addr & 0xFF), SMB_CSR(R_SMB_CMD));
+ out64((b & 0xff), SMB_CSR(R_SMB_DATA));
+ out64(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ out64(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ /* read the same byte again to make sure it is written */
+ out64(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (in64(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ return 0;
+}
+
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+
+int m41t81_set_time(unsigned long t)
+{
+ struct rtc_time tm;
+
+ to_tm(t, &tm);
+
+ /*
+ * Note the write order matters as it ensures the correctness.
+ * When we write sec, 10th sec is clear. It is reasonable to
+ * believe we should finish writing min within a second.
+ */
+
+ BIN_TO_BCD(tm.tm_sec);
+ m41t81_write(M41T81REG_SC, tm.tm_sec);
+
+ BIN_TO_BCD(tm.tm_min);
+ m41t81_write(M41T81REG_MN, tm.tm_min);
+
+ BIN_TO_BCD(tm.tm_hour);
+ tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
+ m41t81_write(M41T81REG_HR, tm.tm_hour);
+
+ /* tm_wday starts from 0 to 6 */
+ if (tm.tm_wday == 0) tm.tm_wday = 7;
+ BIN_TO_BCD(tm.tm_wday);
+ m41t81_write(M41T81REG_DY, tm.tm_wday);
+
+ BIN_TO_BCD(tm.tm_mday);
+ m41t81_write(M41T81REG_DT, tm.tm_mday);
+
+ /* tm_mon starts from 0, *ick* */
+ tm.tm_mon ++;
+ BIN_TO_BCD(tm.tm_mon);
+ m41t81_write(M41T81REG_MO, tm.tm_mon);
+
+ /* we don't do century, everything is beyond 2000 */
+ tm.tm_year %= 100;
+ BIN_TO_BCD(tm.tm_year);
+ m41t81_write(M41T81REG_YR, tm.tm_year);
+
+ return 0;
+}
+
+unsigned long m41t81_get_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+
+ /*
+ * min is valid if two reads of sec are the same.
+ */
+ for (;;) {
+ sec = m41t81_read(M41T81REG_SC);
+ min = m41t81_read(M41T81REG_MN);
+ if (sec == m41t81_read(M41T81REG_SC)) break;
+ }
+ hour = m41t81_read(M41T81REG_HR) & 0x3f;
+ day = m41t81_read(M41T81REG_DT);
+ mon = m41t81_read(M41T81REG_MO);
+ year = m41t81_read(M41T81REG_YR);
+
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+
+ year += 2000;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+int m41t81_probe(void)
+{
+ unsigned int tmp;
+
+ /* enable chip if it is not enabled yet */
+ tmp = m41t81_read(M41T81REG_SC);
+ m41t81_write(M41T81REG_SC, tmp & 0x7f);
+
+ return (m41t81_read(M41T81REG_SC) != -1);
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)