patch-2.4.22 linux-2.4.22/arch/mips/gt64120/momenco_ocelot/pci.c

• Lines: 76
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.21/arch/mips/gt64120/momenco_ocelot/pci.c
• Orig date: 2001-09-09 10:43:01.000000000 -0700

diff -urN linux-2.4.21/arch/mips/gt64120/momenco_ocelot/pci.c linux-2.4.22/arch/mips/gt64120/momenco_ocelot/pci.c
@@ -1,75 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/gt64120/momenco_ocelot/pci.c
- *     Board-specific PCI routines for gt64120 controller.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <asm/pci.h>
-
-
-void __init gt64120_board_pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-	u16 cmd;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-
-		if (PCI_SLOT(devices->devfn) == 1) {
-			/*
-			 * Slot 1 is primary ether port, i82559
-			 * we double-check against that assumption
-			 */
-			if ((devices->vendor != 0x8086) ||
-			    (devices->device != 0x1209) ) {
-				panic("gt64120_board_pcibios_fixup_bus: found "
-				      "unexpected PCI device in slot 1.");
-			}
-			devices->irq = 2;       /* irq_nr is 2 for INT0 */
-		} else if (PCI_SLOT(devices->devfn) == 2) {
-			/*
-			 * Slot 2 is secondary ether port, i21143 
-			 * we double-check against that assumption
-			 */
-			if ((devices->vendor != 0x1011) ||
-			    (devices->device != 0x19) ) {
-				panic("galileo_pcibios_fixup_bus: "
-				      "found unexpected PCI device in slot 2.");
-			}
-			devices->irq = 3;       /* irq_nr is 3 for INT1 */
-		} else if (PCI_SLOT(devices->devfn) == 4) {
-			/* PMC Slot 1 */
-			devices->irq = 8;       /* irq_nr is 8 for INT6 */
-		} else if (PCI_SLOT(devices->devfn) == 5) {
-			/* PMC Slot 1 */
-			devices->irq = 9;       /* irq_nr is 9 for INT7 */
-		} else {
-			/* We don't have assign interrupts for other devices. */
-			devices->irq = 0xff;
-		}
-
-		/* Assign an interrupt number for the device */
-		bus->ops->write_byte(devices, PCI_INTERRUPT_LINE, devices->irq);
-
-		/* enable master */
-		bus->ops->read_word(devices, PCI_COMMAND, &cmd);
-		cmd |= PCI_COMMAND_MASTER;
-		bus->ops->write_word(devices, PCI_COMMAND, cmd);
-	}
-}