patch-2.4.22 linux-2.4.22/arch/mips/galileo-boards/ev64120/irq-handler.c

• Lines: 271
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.21/arch/mips/galileo-boards/ev64120/irq-handler.c
• Orig date: 2002-11-28 15:53:10.000000000 -0800

diff -urN linux-2.4.21/arch/mips/galileo-boards/ev64120/irq-handler.c linux-2.4.22/arch/mips/galileo-boards/ev64120/irq-handler.c
@@ -1,270 +0,0 @@
-/*
- * Galileo Technology chip interrupt handler
- *
- *  Modified by RidgeRun, Inc.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <asm/ptrace.h>
-#include <linux/config.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include <asm/gt64120.h>
-#include <asm/galileo-boards/ev64120.h>
-#include <asm/galileo-boards/ev64120int.h>
-
-/*
- * These are interrupt handlers for the GT on-chip interrupts.  They all come
- * in to the MIPS on a single interrupt line, and have to be handled and ack'ed
- * differently than other MIPS interrupts.
- */
-
-#if CURRENTLY_UNUSED
-
-struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH];
-void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr);
-
-/*
- * hook_irq_handler
- *
- * Hooks IRQ handler to the system. When the system is interrupted
- * the interrupt service routine is called.
- *
- * Inputs :
- * int_cause - The interrupt cause number. In EVB64120 two parameters
- *             are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num   - Indicates which bit number in the cause register
- * isr_ptr   - Pointer to the interrupt service routine
- *
- * Outputs :
- */
-void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
-{
-	irq_handlers[int_cause][bit_num].routine = isr_ptr;
-}
-
-
-/*
- * enable_galileo_irq
- *
- * Enables the IRQ on Galileo Chip
- *
- * Inputs :
- * int_cause -  The interrupt cause number. In EVB64120 two parameters
- *            are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num   - Indicates which bit number in the cause register
- *
- * Outputs :
- * 1 if succesful, 0 if failure
- */
-int enable_galileo_irq(int int_cause, int bit_num)
-{
-	if (int_cause == INT_CAUSE_MAIN)
-		SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num));
-	else if (int_cause == INT_CAUSE_HIGH)
-		SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
-			     (1 << bit_num));
-	else
-		return 0;
-	return 1;
-}
-
-/*
- * disable_galileo_irq
- *
- * Disables the IRQ on Galileo Chip
- *
- * Inputs :
- * int_cause -  The interrupt cause number. In EVB64120 two parameters
- *            are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num   - Indicates which bit number in the cause register
- *
- * Outputs :
- * 1 if succesful, 0 if failure
- */
-int disable_galileo_irq(int int_cause, int bit_num)
-{
-	if (int_cause == INT_CAUSE_MAIN)
-		RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER,
-			       (1 << bit_num));
-	else if (int_cause == INT_CAUSE_HIGH)
-		RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
-			       (1 << bit_num));
-	else
-		return 0;
-	return 1;
-}
-
-#endif				/*  UNUSED  */
-
-/*
- * galileo_irq -
- *
- * Interrupt handler for interrupts coming from the Galileo chip.
- * It could be timer interrupt, built in ethernet ports etc...
- *
- * Inputs :
- *
- * Outputs :
- *
- */
-static void galileo_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-	unsigned int irq_src, int_high_src, irq_src_mask,
-	    int_high_src_mask;
-	int handled;
-	unsigned int count;
-	static int counter = 0;
-
-	GT_READ(GT_INTRCAUSE_OFS, &irq_src);
-	GT_READ(GT_INTRMASK_OFS, &irq_src_mask);
-	GT_READ(GT_HINTRCAUSE_OFS, &int_high_src);
-	GT_READ(GT_HINTRMASK_OFS, &int_high_src_mask);
-	irq_src = irq_src & irq_src_mask;
-	int_high_src = int_high_src & int_high_src_mask;
-
-	handled = 0;
-
-	/* Execute all interrupt handlers */
-	/* Check for timer interrupt */
-	if (irq_src & 0x00000800) {
-		handled = 1;
-		irq_src &= ~0x00000800;
-		//    RESET_REG_BITS (INTERRUPT_CAUSE_REGISTER,BIT8);
-		do_timer(regs);
-	}
-
-	if (irq_src) {
-		printk(KERN_INFO
-		       "Other Galileo interrupt received irq_src %x\n",
-		       irq_src);
-#if CURRENTLY_UNUSED
-		for (count = 0; count < MAX_CAUSE_REG_WIDTH; count++) {
-			if (irq_src & (1 << count)) {
-				if (irq_handlers[INT_CAUSE_MAIN][count].
-				    routine) {
-					queue_task(&irq_handlers
-						   [INT_CAUSE_MAIN][count],
-						   &tq_immediate);
-					mark_bh(IMMEDIATE_BH);
-					handled = 1;
-				}
-			}
-		}
-#endif				/*  UNUSED  */
-	}
-	GT_WRITE(GT_INTRCAUSE_OFS, 0);
-	GT_WRITE(GT_HINTRCAUSE_OFS, 0);
-
-#undef GALILEO_I2O
-#ifdef GALILEO_I2O
-	/*
-	   Future I2O support.  We currently attach I2O interrupt handlers to the
-	   Galileo interrupt (int 4) and handle them in do_IRQ.
-	 */
-	if (isInBoundDoorBellInterruptSet()) {
-		printk(KERN_INFO "I2O doorbell interrupt received.\n");
-		handled = 1;
-	}
-
-	if (isInBoundPostQueueInterruptSet()) {
-		printk(KERN_INFO "I2O Queue interrupt received.\n");
-		handled = 1;
-	}
-
-	/*
-	   This normally would be outside of the ifdef, but since
-	   we're handling I2O outside of this handler, this
-	   printk shows up every time we get a valid I2O
-	   interrupt.  So turn this off for now.
-	 */
-	if (handled == 0) {
-		if (counter < 50) {
-			printk("Spurious Galileo interrupt...\n");
-			counter++;
-		}
-	}
-#endif
-}
-
-/*
- * galileo_time_init -
- *
- * Initializes timer using galileo's built in timer.
- *
- *
- * Inputs :
- * irq - number of irq to be used by the timer
- *
- * Outpus :
- *
- */
-#ifdef CONFIG_SYSCLK_100
-#define Sys_clock (100 * 1000000)	// 100 MHz
-#endif
-#ifdef CONFIG_SYSCLK_83
-#define Sys_clock (83.333 * 1000000)	// 83.333 MHz
-#endif
-#ifdef CONFIG_SYSCLK_75
-#define Sys_clock (75 * 1000000)	// 75 MHz
-#endif
-
-/*
- * This will ignore the standard MIPS timer interrupt handler that is passed
- * in as *irq (=irq0 in ../kernel/time.c).  We will do our own timer interrupt
- * handling.
- */
-void galileo_time_init(struct irqaction *irq)
-{
-	extern irq_desc_t irq_desc[NR_IRQS];
-	static struct irqaction timer;
-
-	/* Disable timer first */
-	GT_WRITE(GT_TC_CONTROL_OFS, 0);
-	/* Load timer value for 100 Hz */
-	GT_WRITE(GT_TC3_OFS, Sys_clock / 100);
-
-	/*
-	 * Create the IRQ structure entry for the timer.  Since we're too early
-	 * in the boot process to use the "request_irq()" call, we'll hard-code
-	 * the values to the correct interrupt line.
-	 */
-	timer.handler = &galileo_irq;
-	timer.flags = SA_SHIRQ;
-	timer.name = "timer";
-	timer.dev_id = NULL;
-	timer.next = NULL;
-	timer.mask = 0;
-	irq_desc[TIMER].action = &timer;
-
-	/* Enable timer ints */
-	GT_WRITE(GT_TC_CONTROL_OFS, 0xc0);
-	/* clear Cause register first */
-	GT_WRITE(GT_INTRCAUSE_OFS, 0x0);
-	/* Unmask timer int */
-	GT_WRITE(GT_INTRMASK_OFS, 0x800);
-	/* Clear High int register */
-	GT_WRITE(GT_HINTRCAUSE_OFS, 0x0);
-	/* Mask All interrupts at High cause interrupt */
-	GT_WRITE(GT_HINTRMASK_OFS, 0x0);
-
-}
-
-void galileo_irq_init(void)
-{
-	int i, j;
-
-#if CURRENTLY_UNUSED
-	/* Reset irq handlers pointers to NULL */
-	for (i = 0; i < MAX_CAUSE_REGS; i++) {
-		for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) {
-			irq_handlers[i][j].next = NULL;
-			irq_handlers[i][j].sync = 0;
-			irq_handlers[i][j].routine = NULL;
-			irq_handlers[i][j].data = NULL;
-		}
-	}
-#endif
-}