patch-2.4.21 linux-2.4.21/include/asm-ppc/mpc10x.h
Next file: linux-2.4.21/include/asm-ppc/mpc8260.h
Previous file: linux-2.4.21/include/asm-ppc/module.h
Back to the patch index
Back to the overall index
- Lines: 168
- Date:
2003-06-13 07:51:38.000000000 -0700
- Orig file:
linux-2.4.20/include/asm-ppc/mpc10x.h
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.20/include/asm-ppc/mpc10x.h linux-2.4.21/include/asm-ppc/mpc10x.h
@@ -0,0 +1,167 @@
+/*
+ * arch/ppc/kernel/mpc10x.h
+ *
+ * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
+ * ctlr/EPIC/etc.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __PPC_KERNEL_MPC10X_H
+#define __PPC_KERNEL_MPC10X_H
+
+#include <linux/pci_ids.h>
+#include <asm/pci-bridge.h>
+
+/*
+ * The values here don't completely map everything but should work in most
+ * cases.
+ *
+ * MAP A (PReP Map)
+ * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
+ * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
+ * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
+ * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ *
+ * MAP B (CHRP Map)
+ * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
+ * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
+ * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
+ * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ */
+
+/*
+ * Define the vendor/device IDs for the various bridges--should be added to
+ * <linux/pci_ids.h>
+ */
+#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
+ PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+/* Define the type of map to use */
+#define MPC10X_MEM_MAP_A 1
+#define MPC10X_MEM_MAP_B 2
+
+/* Map A (PReP Map) Defines */
+#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
+#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
+
+#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
+#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
+#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
+
+#define MPC10X_MAPA_PCI_IO_START 0x00000000
+#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
+#define MPC10X_MAPA_PCI_MEM_START 0x00000000
+#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
+
+#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
+ MPC10X_MAPA_PCI_MEM_START)
+
+/* Map B (CHRP Map) Defines */
+#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
+#define MPC10X_MAPB_CNFG_DATA 0xfee00000
+
+#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
+#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
+#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
+
+#define MPC10X_MAPB_PCI_IO_START 0x00000000
+#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
+#define MPC10X_MAPB_PCI_MEM_START 0x80000000
+#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
+
+#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
+ MPC10X_MAPB_PCI_MEM_START)
+
+/* Set hose members to values appropriate for the mem map used */
+#define MPC10X_SETUP_HOSE(hose, map) { \
+ (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
+ (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
+ (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
+ (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
+ (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
+ (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
+}
+
+
+/* Miscellaneous Configuration register offsets */
+#define MPC10X_CFG_PIR_REG 0x09
+#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
+#define MPC10X_CFG_PIR_AGENT 0x01
+
+#define MPC10X_CFG_EUMBBAR 0x78
+
+#define MPC10X_CFG_PICR1_REG 0xa8
+#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
+#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
+#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
+#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
+
+#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
+#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
+#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
+#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
+#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x80 /* PCI_COMPATIBILITY_HOLE */
+#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x40 /* PROC_COMPATIBILITY_HOLE */
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2i 0x94 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
+
+/* Define some offset in the EUMB */
+#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
+
+#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
+#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
+#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
+#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
+#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
+#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
+#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
+#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
+#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
+#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
+#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
+#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
+#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
+#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
+#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
+#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
+
+/*
+ * Define some recommended places to put the EUMB regs.
+ * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
+ */
+extern unsigned long ioremap_base;
+#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
+#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
+
+
+int mpc10x_bridge_init(struct pci_controller *hose,
+ uint current_map,
+ uint new_map,
+ uint phys_eumb_base);
+unsigned long mpc10x_get_mem_size(uint mem_map);
+int mpc10x_enable_store_gathering(struct pci_controller *hose);
+int mpc10x_disable_store_gathering(struct pci_controller *hose);
+
+#endif /* __PPC_KERNEL_MPC10X_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)