patch-2.4.21 linux-2.4.21/drivers/mtd/nand/edb7312.c
Next file: linux-2.4.21/drivers/mtd/nand/nand.c
Previous file: linux-2.4.21/drivers/mtd/nand/autcpu12.c
Back to the patch index
Back to the overall index
- Lines: 249
- Date:
2003-06-13 07:51:34.000000000 -0700
- Orig file:
linux-2.4.20/drivers/mtd/nand/edb7312.c
- Orig date:
1969-12-31 16:00:00.000000000 -0800
diff -urN linux-2.4.20/drivers/mtd/nand/edb7312.c linux-2.4.21/drivers/mtd/nand/edb7312.c
@@ -0,0 +1,248 @@
+/*
+ * drivers/mtd/nand/edb7312.c
+ *
+ * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
+ *
+ * Derived from drivers/mtd/nand/autcpu12.c
+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: edb7312.c,v 1.3 2002/06/06 12:58:16 mag Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
+ * a 64Mibit (8MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <asm/sizes.h>
+#include <asm/hardware/clps7111.h>
+
+/*
+ * MTD structure for EDB7312 board
+ */
+static struct mtd_info *ep7312_mtd = NULL;
+
+/*
+ * Values specific to the EDB7312 board (used with EP7312 processor)
+ */
+#define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
+#define EP7312_PXDR 0x0001 /*
+ * IO offset to Port B data register
+ * where the CLE, ALE and NCE pins
+ * are wired to.
+ */
+#define EP7312_PXDDR 0x0041 /*
+ * IO offset to Port B data direction
+ * register so we can control the IO
+ * lines.
+ */
+
+/*
+ * Module stuff
+ */
+
+static int ep7312_fio_pbase = EP7312_FIO_PBASE;
+static int ep7312_pxdr = EP7312_PXDR;
+static int ep7312_pxddr = EP7312_PXDDR;
+
+#ifdef MODULE
+MODULE_PARM(ep7312_fio_pbase, "i");
+MODULE_PARM(ep7312_pxdr, "i");
+MODULE_PARM(ep7312_pxddr, "i");
+
+__setup("ep7312_fio_pbase=",ep7312_fio_pbase);
+__setup("ep7312_pxdr=",ep7312_pxdr);
+__setup("ep7312_pxddr=",ep7312_pxddr);
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info[] = {
+ { name: "EP7312 Nand Flash",
+ offset: 0,
+ size: 8*1024*1024 }
+};
+#define NUM_PARTITIONS 1
+
+extern int parse_cmdline_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ const char *mtd_id);
+#endif
+
+
+/*
+ * hardware specific access to control-lines
+ */
+static void ep7312_hwcontrol(int cmd)
+{
+ switch(cmd) {
+
+ case NAND_CTL_SETCLE:
+ clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr);
+ break;
+ case NAND_CTL_CLRCLE:
+ clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr);
+ break;
+
+ case NAND_CTL_SETALE:
+ clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr);
+ break;
+ case NAND_CTL_CLRALE:
+ clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr);
+ break;
+
+ case NAND_CTL_SETNCE:
+ clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr);
+ break;
+ case NAND_CTL_CLRNCE:
+ clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr);
+ break;
+ }
+}
+
+/*
+ * read device ready pin
+ */
+static int ep7312_device_ready(void)
+{
+ return 1;
+}
+
+/*
+ * Main initialization routine
+ */
+static int __init ep7312_init (void)
+{
+ struct nand_chip *this;
+ const char *part_type = 0;
+ int mtd_parts_nb = 0;
+ struct mtd_partition *mtd_parts = 0;
+ int ep7312_fio_base;
+
+ /* Allocate memory for MTD device structure and private data */
+ ep7312_mtd = kmalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip),
+ GFP_KERNEL);
+ if (!ep7312_mtd) {
+ printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* map physical adress */
+ ep7312_fio_base = (unsigned long)ioremap(ep7312_fio_pbase, SZ_1K);
+ if(!ep7312_fio_base) {
+ printk("ioremap EDB7312 NAND flash failed\n");
+ kfree(ep7312_mtd);
+ return -EIO;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *) (&ep7312_mtd[1]);
+
+ /* Initialize structures */
+ memset((char *) ep7312_mtd, 0, sizeof(struct mtd_info));
+ memset((char *) this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ ep7312_mtd->priv = this;
+
+ /*
+ * Set GPIO Port B control register so that the pins are configured
+ * to be outputs for controlling the NAND flash.
+ */
+ clps_writeb(0xf0, ep7312_pxddr);
+
+ /* insert callbacks */
+ this->IO_ADDR_R = ep7312_fio_base;
+ this->IO_ADDR_W = ep7312_fio_base;
+ this->hwcontrol = ep7312_hwcontrol;
+ this->dev_ready = ep7312_device_ready;
+ /* 15 us command delay time */
+ this->chip_delay = 15;
+
+ /* Scan to find existence of the device */
+ if (nand_scan (ep7312_mtd)) {
+ iounmap((void *)ep7312_fio_base);
+ kfree (ep7312_mtd);
+ return -ENXIO;
+ }
+
+ /* Allocate memory for internal data buffer */
+ this->data_buf = kmalloc (sizeof(u_char) * (ep7312_mtd->oobblock + ep7312_mtd->oobsize), GFP_KERNEL);
+ if (!this->data_buf) {
+ printk("Unable to allocate NAND data buffer for EDB7312.\n");
+ iounmap((void *)ep7312_fio_base);
+ kfree (ep7312_mtd);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for internal data buffer */
+ this->data_cache = kmalloc (sizeof(u_char) * (ep7312_mtd->oobblock + ep7312_mtd->oobsize), GFP_KERNEL);
+ if (!this->data_cache) {
+ printk("Unable to allocate NAND data cache for EDB7312.\n");
+ kfree (this->data_buf);
+ iounmap((void *)ep7312_fio_base);
+ kfree (ep7312_mtd);
+ return -ENOMEM;
+ }
+ this->cache_page = -1;
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ mtd_parts_nb = parse_cmdline_partitions(ep7312_mtd, &mtd_parts,
+ "edb7312-nand");
+ if (mtd_parts_nb > 0)
+ part_type = "command line";
+ else
+ mtd_parts_nb = 0;
+#endif
+ if (mtd_parts_nb == 0)
+ {
+ mtd_parts = partition_info;
+ mtd_parts_nb = NUM_PARTITIONS;
+ part_type = "static";
+ }
+
+ /* Register the partitions */
+ printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+ add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb);
+
+ /* Return happy */
+ return 0;
+}
+module_init(ep7312_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ep7312_cleanup (void)
+{
+ struct nand_chip *this = (struct nand_chip *) &ep7312_mtd[1];
+
+ /* Unregister the device */
+ del_mtd_device (ep7312_mtd);
+
+ /* Free internal data buffer */
+ kfree (this->data_buf);
+ kfree (this->data_cache);
+
+ /* Free the MTD device structure */
+ kfree (ep7312_mtd);
+}
+module_exit(ep7312_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
+MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)