patch-2.4.21 linux-2.4.21/drivers/mtd/maps/Config.in

Next file: linux-2.4.21/drivers/mtd/maps/Makefile
Previous file: linux-2.4.21/drivers/mtd/ftl.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.20/drivers/mtd/maps/Config.in linux-2.4.21/drivers/mtd/maps/Config.in
@@ -1,6 +1,6 @@
 # drivers/mtd/maps/Config.in
 
-# $Id: Config.in,v 1.28 2002/03/08 16:34:35 rkaiser Exp $
+# $Id: Config.in,v 1.43 2003/01/24 14:26:38 dwmw2 Exp $
 
 mainmenu_option next_comment
 
@@ -30,9 +30,12 @@
    dep_tristate '  JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC
+   dep_tristate '  Flash device mapped with DOCCS on NatSemi SCx200' CONFIG_MTD_SCx200_DOCFLASH $CONFIG_MTD_CFI
    dep_tristate '  BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_MTD_JEDECPROBE
-   dep_tristate ' ROM connected to AMD766 southbridge' CONFIG_MTD_AMD766ROM $CONFIG_MTD_GEN_PROBE   
-   dep_tristate ' ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
+   dep_tristate '  ROM connected to AMD76X southbridge' CONFIG_MTD_AMD76XROM $CONFIG_MTD_GEN_PROBE   
+   dep_tristate '  ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
+   dep_tristate '  CFI Flash device mapped on SnapGear/SecureEdge' CONFIG_MTD_NETtel $CONFIG_MTD_PARTITIONS
+   dep_tristate '  BIOS flash chip on Intel SCB2 boards' CONFIG_MTD_SCB2_FLASH $CONFIG_MTD_GEN_PROBE
 fi
 
 if [ "$CONFIG_PPC" = "y" ]; then
@@ -41,16 +44,17 @@
    dep_tristate '  System flash on MBX860 board' CONFIG_MTD_MBX860 $CONFIG_MTD_CFI
    dep_tristate '  CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI
    dep_tristate '  CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFI
+   dep_tristate '  CFI Flash device mapped on IBM Redwood-4/5' CONFIG_MTD_REDWOOD $CONFIG_MTD_CFI
 fi
 
 if [ "$CONFIG_MIPS" = "y" ]; then
-   dep_tristate '  Pb1000 boot flash device' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
+   dep_tristate '  Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
    dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
    dep_tristate '  Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
    if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \
 	-o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then
-      bool '  Pb1[015]00 boot flash device' CONFIG_MTD_PB1500_BOOT 
-      bool '  Pb1[015]00 user flash device (2nd 32MB bank)' CONFIG_MTD_PB1500_USER
+      bool '  Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT 
+      bool '  Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER
    fi
    dep_tristate '  Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS 
    if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
@@ -59,6 +63,7 @@
       int '    Bus width in octets' CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH 2
    fi
    dep_tristate '  Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOT
+   dep_tristate '  LASAT flash device' CONFIG_MTD_LASAT $CONFIG_MTD_CFI $CONFIG_LASAT
 fi
 
 if [ "$CONFIG_SUPERH" = "y" ]; then
@@ -74,16 +79,25 @@
    dep_tristate '  CFI Flash device mapped on ARM Integrator/P720T' CONFIG_MTD_ARM_INTEGRATOR $CONFIG_MTD_CFI
    dep_tristate '  Cirrus CDB89712 evaluation board mappings' CONFIG_MTD_CDB89712 $CONFIG_MTD_CFI $CONFIG_ARCH_CDB89712
    dep_tristate '  CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS
-   dep_tristate '  CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE $CONFIG_MTD_PARTITIONS
+   dep_tristate '  CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE
    dep_tristate '  CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_ARCH_IQ80310
    dep_tristate '  CFI Flash device mapped on Epxa10db' CONFIG_MTD_EPXA10DB $CONFIG_MTD_CFI  $CONFIG_MTD_PARTITIONS $CONFIG_ARCH_CAMELOT
+   dep_tristate '  CFI Flash device mapped on the FortuNet board' CONFIG_MTD_FORTUNET $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS $CONFIG_SA1100_FORTUNET
    dep_tristate '  NV-RAM mapping AUTCPU12 board' CONFIG_MTD_AUTCPU12 $CONFIG_ARCH_AUTCPU12
+   dep_tristate '  CFI Flash device mapped on EDB7312' CONFIG_MTD_EDB7312 $CONFIG_MTD_CFI
+   dep_tristate '  JEDEC Flash device mapped on impA7' CONFIG_MTD_IMPA7 $CONFIG_MTD_JEDECPROBE
+   dep_tristate '  JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame' CONFIG_MTD_CEIVA $CONFIG_MTD_JEDECPROBE  $CONFIG_ARCH_CEIVA
 fi
 if [ "$CONFIG_ALPHA" = "y" ]; then
    dep_tristate '  Flash chip mapping on TSUNAMI' CONFIG_MTD_TSUNAMI $CONFIG_MTD_GENPROBE
 fi
 
+if [ "$CONFIG_UCLINUX" = "y" ]; then
+   dep_tristate '  Generic uClinux RAM/ROM filesystem support' CONFIG_MTD_UCLINUX $CONFIG_MTD_PARTITIONS
+fi
+
 # This needs CFI or JEDEC, depending on the cards found.
 dep_tristate '  PCI MTD driver' CONFIG_MTD_PCI $CONFIG_MTD $CONFIG_PCI
+dep_tristate '  PCMCIA MTD driver' CONFIG_MTD_PCMCIA $CONFIG_MTD $CONFIG_PCMCIA
 
 endmenu

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)