patch-2.4.21 linux-2.4.21/drivers/ide/ide_modes.h

• Lines: 221
• Date: 2003-06-13 07:51:33.000000000 -0700
• Orig file: linux-2.4.20/drivers/ide/ide_modes.h
• Orig date: 2001-11-22 11:46:58.000000000 -0800

diff -urN linux-2.4.20/drivers/ide/ide_modes.h linux-2.4.21/drivers/ide/ide_modes.h
@@ -16,8 +16,6 @@
  * breaking the fragile cmd640.c support.
  */
 
-#ifdef CONFIG_BLK_DEV_IDE_MODES
-
 /*
  * Standard (generic) timings for PIO modes, from ATA2 specification.
  * These timings are for access to the IDE data port register *only*.
@@ -31,206 +29,13 @@
 } ide_pio_timings_t;
 
 typedef struct ide_pio_data_s {
-	byte pio_mode;
-	byte use_iordy;
-	byte overridden;
-	byte blacklisted;
+	u8 pio_mode;
+	u8 use_iordy;
+	u8 overridden;
+	u8 blacklisted;
 	unsigned int cycle_time;
 } ide_pio_data_t;
 	
-#ifndef _IDE_C
-
-int ide_scan_pio_blacklist (char *model);
-byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d);
+u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
 extern const ide_pio_timings_t ide_pio_timings[6];
-
-#else /* _IDE_C */
-
-const ide_pio_timings_t ide_pio_timings[6] = {
-	{ 70,	165,	600 },	/* PIO Mode 0 */
-	{ 50,	125,	383 },	/* PIO Mode 1 */
-	{ 30,	100,	240 },	/* PIO Mode 2 */
-	{ 30,	80,	180 },	/* PIO Mode 3 with IORDY */
-	{ 25,	70,	120 },	/* PIO Mode 4 with IORDY */
-	{ 20,	50,	100 }	/* PIO Mode 5 with IORDY (nonstandard) */
-};
-
-/*
- * Black list. Some drives incorrectly report their maximal PIO mode,
- * at least in respect to CMD640. Here we keep info on some known drives.
- */
-static struct ide_pio_info {
-	const char	*name;
-	int		pio;
-} ide_pio_blacklist [] = {
-/*	{ "Conner Peripherals 1275MB - CFS1275A", 4 }, */
-	{ "Conner Peripherals 540MB - CFS540A", 3 },
-
-	{ "WDC AC2700",  3 },
-	{ "WDC AC2540",  3 },
-	{ "WDC AC2420",  3 },
-	{ "WDC AC2340",  3 },
-	{ "WDC AC2250",  0 },
-	{ "WDC AC2200",  0 },
-	{ "WDC AC21200", 4 },
-	{ "WDC AC2120",  0 },
-	{ "WDC AC2850",  3 },
-	{ "WDC AC1270",  3 },
-	{ "WDC AC1170",  1 },
-	{ "WDC AC1210",  1 },
-	{ "WDC AC280",   0 },
-/*	{ "WDC AC21000", 4 }, */
-	{ "WDC AC31000", 3 },
-	{ "WDC AC31200", 3 },
-/*	{ "WDC AC31600", 4 }, */
-
-	{ "Maxtor 7131 AT", 1 },
-	{ "Maxtor 7171 AT", 1 },
-	{ "Maxtor 7213 AT", 1 },
-	{ "Maxtor 7245 AT", 1 },
-	{ "Maxtor 7345 AT", 1 },
-	{ "Maxtor 7546 AT", 3 },
-	{ "Maxtor 7540 AV", 3 },
-
-	{ "SAMSUNG SHD-3121A", 1 },
-	{ "SAMSUNG SHD-3122A", 1 },
-	{ "SAMSUNG SHD-3172A", 1 },
-
-/*	{ "ST51080A", 4 },
- *	{ "ST51270A", 4 },
- *	{ "ST31220A", 4 },
- *	{ "ST31640A", 4 },
- *	{ "ST32140A", 4 },
- *	{ "ST3780A",  4 },
- */
-	{ "ST5660A",  3 },
-	{ "ST3660A",  3 },
-	{ "ST3630A",  3 },
-	{ "ST3655A",  3 },
-	{ "ST3391A",  3 },
-	{ "ST3390A",  1 },
-	{ "ST3600A",  1 },
-	{ "ST3290A",  0 },
-	{ "ST3144A",  0 },
-	{ "ST3491A",  1 },	/* reports 3, should be 1 or 2 (depending on */	
-				/* drive) according to Seagates FIND-ATA program */
-
-	{ "QUANTUM ELS127A", 0 },
-	{ "QUANTUM ELS170A", 0 },
-	{ "QUANTUM LPS240A", 0 },
-	{ "QUANTUM LPS210A", 3 },
-	{ "QUANTUM LPS270A", 3 },
-	{ "QUANTUM LPS365A", 3 },
-	{ "QUANTUM LPS540A", 3 },
-	{ "QUANTUM LIGHTNING 540A", 3 },
-	{ "QUANTUM LIGHTNING 730A", 3 },
-
-        { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */
-        { "QUANTUM FIREBALL_640", 3 }, 
-        { "QUANTUM FIREBALL_1080", 3 },
-        { "QUANTUM FIREBALL_1280", 3 },
-	{ NULL,	0 }
-};
-
-/*
- * This routine searches the ide_pio_blacklist for an entry
- * matching the start/whole of the supplied model name.
- *
- * Returns -1 if no match found.
- * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
- */
-int ide_scan_pio_blacklist (char *model)
-{
-	struct ide_pio_info *p;
-
-	for (p = ide_pio_blacklist; p->name != NULL; p++) {
-		if (strncmp(p->name, model, strlen(p->name)) == 0)
-			return p->pio;
-	}
-	return -1;
-}
-
-/*
- * This routine returns the recommended PIO settings for a given drive,
- * based on the drive->id information and the ide_pio_blacklist[].
- * This is used by most chipset support modules when "auto-tuning".
- */
-
-/*
- * Drive PIO mode auto selection
- */
-byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d)
-{
-	int pio_mode;
-	int cycle_time = 0;
-	int use_iordy = 0;
-	struct hd_driveid* id = drive->id;
-	int overridden  = 0;
-	int blacklisted = 0;
-
-	if (mode_wanted != 255) {
-		pio_mode = mode_wanted;
-	} else if (!drive->id) {
-		pio_mode = 0;
-	} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
-		overridden = 1;
-		blacklisted = 1;
-		use_iordy = (pio_mode > 2);
-	} else {
-		pio_mode = id->tPIO;
-		if (pio_mode > 2) {	/* 2 is maximum allowed tPIO value */
-			pio_mode = 2;
-			overridden = 1;
-		}
-		if (id->field_valid & 2) {	  /* drive implements ATA2? */
-			if (id->capability & 8) { /* drive supports use_iordy? */
-				use_iordy = 1;
-				cycle_time = id->eide_pio_iordy;
-				if (id->eide_pio_modes & 7) {
-					overridden = 0;
-					if (id->eide_pio_modes & 4)
-						pio_mode = 5;
-					else if (id->eide_pio_modes & 2)
-						pio_mode = 4;
-					else
-						pio_mode = 3;
-				}
-			} else {
-				cycle_time = id->eide_pio;
-			}
-		}
-
-#if 0
-		if (drive->id->major_rev_num & 0x0004) printk("ATA-2 ");
-#endif
-
-		/*
-		 * Conservative "downgrade" for all pre-ATA2 drives
-		 */
-		if (pio_mode && pio_mode < 4) {
-			pio_mode--;
-			overridden = 1;
-#if 0
-			use_iordy = (pio_mode > 2);
-#endif
-			if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
-				cycle_time = 0; /* use standard timing */
-		}
-	}
-	if (pio_mode > max_mode) {
-		pio_mode = max_mode;
-		cycle_time = 0;
-	}
-	if (d) {
-		d->pio_mode = pio_mode;
-		d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
-		d->use_iordy = use_iordy;
-		d->overridden = overridden;
-		d->blacklisted = blacklisted;
-	}
-	return pio_mode;
-}
-
-#endif /* _IDE_C */
-#endif /* CONFIG_BLK_DEV_IDE_MODES */
 #endif /* _IDE_MODES_H */