patch-2.4.21 linux-2.4.21/drivers/ide/buddha.c

• Lines: 226
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.20/drivers/ide/buddha.c
• Orig date: 2002-08-02 17:39:44.000000000 -0700

diff -urN linux-2.4.20/drivers/ide/buddha.c linux-2.4.21/drivers/ide/buddha.c
@@ -1,225 +0,0 @@
-/*
- *  linux/drivers/ide/buddha.c -- Amiga Buddha, Catweasel and X-Surf IDE Driver
- *
- *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
- *
- *  This driver was written based on the specifications in README.buddha and
- *  the X-Surf info from Inside_XSurf.txt available at
- *  http://www.jschoenfeld.com
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *  TODO:
- *    - test it :-)
- *    - tune the timings using the speed-register
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/zorro.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-
-    /*
-     *  The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
-     */
-
-#define BUDDHA_NUM_HWIFS	2
-#define CATWEASEL_NUM_HWIFS	3
-#define XSURF_NUM_HWIFS         2
-
-    /*
-     *  Bases of the IDE interfaces (relative to the board address)
-     */
-
-#define BUDDHA_BASE1	0x800
-#define BUDDHA_BASE2	0xa00
-#define BUDDHA_BASE3	0xc00
-
-#define XSURF_BASE1     0xb000 /* 2.5" Interface */
-#define XSURF_BASE2     0xd000 /* 3.5" Interface */
-
-static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
-};
-
-static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
-     XSURF_BASE1, XSURF_BASE2
-};
-
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define BUDDHA_DATA	0x00
-#define BUDDHA_ERROR	0x06		/* see err-bits */
-#define BUDDHA_NSECTOR	0x0a		/* nr of sectors to read/write */
-#define BUDDHA_SECTOR	0x0e		/* starting sector */
-#define BUDDHA_LCYL	0x12		/* starting cylinder */
-#define BUDDHA_HCYL	0x16		/* high byte of starting cyl */
-#define BUDDHA_SELECT	0x1a		/* 101dhhhh , d=drive, hhhh=head */
-#define BUDDHA_STATUS	0x1e		/* see status-bits */
-#define BUDDHA_CONTROL	0x11a
-#define XSURF_CONTROL   -1              /* X-Surf has no CS1* (Control/AltStat) */
-
-static int buddha_offsets[IDE_NR_PORTS] __initdata = {
-    BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
-    BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1
-};
-
-static int xsurf_offsets[IDE_NR_PORTS] __initdata = {
-    BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
-    BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1
-};
-
-    /*
-     *  Other registers
-     */
-
-#define BUDDHA_IRQ1	0xf00		/* MSB = 1, Harddisk is source of */
-#define BUDDHA_IRQ2	0xf40		/* interrupt */
-#define BUDDHA_IRQ3	0xf80
-
-#define XSURF_IRQ1      0x7e
-#define XSURF_IRQ2      0x7e
-
-static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
-};
-
-static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
-    XSURF_IRQ1, XSURF_IRQ2
-};
-
-#define BUDDHA_IRQ_MR	0xfc0		/* master interrupt enable */
-
-
-    /*
-     *  Board information
-     */
-
-typedef enum BuddhaType_Enum {
-    BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
-} BuddhaType;
-
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int buddha_ack_intr(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-static int xsurf_ack_intr(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
-    /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
-    z_writeb(0, hwif->io_ports[IDE_IRQ_OFFSET]); 
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-    /*
-     *  Probe for a Buddha or Catweasel IDE interface
-     */
-
-void __init buddha_init(void)
-{
-	hw_regs_t hw;
-	int i, index;
-
-	struct zorro_dev *z = NULL;
-	u_long buddha_board = 0;
-	BuddhaType type;
-	int buddha_num_hwifs;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		unsigned long board;
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
-			type=BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
-			type=BOARD_CATWEASEL;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			buddha_num_hwifs = XSURF_NUM_HWIFS;
-			type=BOARD_XSURF;
-		} else 
-			continue;
-		
-		board = z->resource.start;
-		
-		if(type != BOARD_XSURF) {
-			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
-				continue;
-		} else {
-			if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
-				continue;
-			if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
-				goto fail_base2;
-			if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
-				release_mem_region(board+XSURF_BASE2, 0x1000);
-fail_base2:
-				release_mem_region(board+XSURF_BASE1, 0x1000);
-				continue;
-			}
-		}	  
-		buddha_board = ZTWO_VADDR(board);
-		
-		/* write to BUDDHA_IRQ_MR to enable the board IRQ */
-		/* X-Surf doesn't have this.  IRQs are always on */
-		if (type != BOARD_XSURF)
-			z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
-		
-		for(i=0;i<buddha_num_hwifs;i++) {
-			if(type != BOARD_XSURF) {
-				ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+buddha_bases[i]),
-						buddha_offsets, 0,
-						(ide_ioreg_t)(buddha_board+buddha_irqports[i]),
-						buddha_ack_intr, IRQ_AMIGA_PORTS);
-			} else {
-				ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+xsurf_bases[i]),
-						xsurf_offsets, 0,
-						(ide_ioreg_t)(buddha_board+xsurf_irqports[i]),
-						xsurf_ack_intr, IRQ_AMIGA_PORTS);
-			}	
-			
-			index = ide_register_hw(&hw, NULL);
-			if (index != -1) {
-				printk("ide%d: ", index);
-				switch(type) {
-				case BOARD_BUDDHA:
-					printk("Buddha");
-					break;
-				case BOARD_CATWEASEL:
-					printk("Catweasel");
-					break;
-				case BOARD_XSURF:
-					printk("X-Surf");
-					break;
-				}
-				printk(" IDE interface\n");	    
-			}		      
-		}
-	}
-}