patch-2.4.21 linux-2.4.21/drivers/char/scx200.c

• Lines: 129
• Date: 2003-06-13 07:51:33.000000000 -0700
• Orig file: linux-2.4.20/drivers/char/scx200.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.20/drivers/char/scx200.c linux-2.4.21/drivers/char/scx200.c
@@ -0,0 +1,128 @@
+/* linux/drivers/char/scx200.c 
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   National Semiconductor SCx200 support. */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/scx200.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 Driver");
+MODULE_LICENSE("GPL");
+
+unsigned scx200_gpio_base = 0;
+long scx200_gpio_shadow[2];
+
+spinlock_t scx200_gpio_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t scx200_gpio_config_lock = SPIN_LOCK_UNLOCKED;
+
+u32 scx200_gpio_configure(int index, u32 mask, u32 bits)
+{
+	u32 config, new_config;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scx200_gpio_config_lock, flags);
+
+	outl(index, scx200_gpio_base + 0x20);
+	config = inl(scx200_gpio_base + 0x24);
+
+	new_config = (config & mask) | bits;
+	outl(new_config, scx200_gpio_base + 0x24);
+
+	spin_unlock_irqrestore(&scx200_gpio_config_lock, flags);
+
+	return config;
+}
+
+void scx200_gpio_dump(unsigned index)
+{
+	u32 config = scx200_gpio_configure(index, ~0, 0);
+	printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
+	
+	if (config & 1) 
+		printk(" OE"); /* output enabled */
+	else
+		printk(" TS"); /* tristate */
+	if (config & 2) 
+		printk(" PP"); /* push pull */
+	else
+		printk(" OD"); /* open drain */
+	if (config & 4) 
+		printk(" PUE"); /* pull up enabled */
+	else
+		printk(" PUD"); /* pull up disabled */
+	if (config & 8) 
+		printk(" LOCKED"); /* locked */
+	if (config & 16) 
+		printk(" LEVEL"); /* level input */
+	else
+		printk(" EDGE"); /* edge input */
+	if (config & 32) 
+		printk(" HI"); /* trigger on rising edge */
+	else
+		printk(" LO"); /* trigger on falling edge */
+	if (config & 64) 
+		printk(" DEBOUNCE"); /* debounce */
+	printk("\n");
+}
+
+int __init scx200_init(void)
+{
+	struct pci_dev *bridge;
+	int bank;
+	unsigned base;
+
+	printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
+
+	if ((bridge = pci_find_device(PCI_VENDOR_ID_NS, 
+				      PCI_DEVICE_ID_NS_SCx200_BRIDGE,
+				      NULL)) == NULL)
+		return -ENODEV;
+
+	base = pci_resource_start(bridge, 0);
+	printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
+
+	if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) {
+		printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
+		return -EBUSY;
+	}
+
+	scx200_gpio_base = base;
+
+	/* read the current values driven on the GPIO signals */
+	for (bank = 0; bank < 2; ++bank)
+		scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
+
+	return 0;
+}
+
+void __exit scx200_cleanup(void)
+{
+	release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
+}
+
+module_init(scx200_init);
+module_exit(scx200_cleanup);
+
+EXPORT_SYMBOL(scx200_gpio_base);
+EXPORT_SYMBOL(scx200_gpio_shadow);
+EXPORT_SYMBOL(scx200_gpio_lock);
+EXPORT_SYMBOL(scx200_gpio_configure);
+EXPORT_SYMBOL(scx200_gpio_dump);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules"
+        c-basic-offset: 8
+    End:
+*/