patch-2.4.20 linux-2.4.20/include/asm-mips64/sibyte/sb1250_uart.h
Next file: linux-2.4.20/include/asm-mips64/sibyte/sb1250regs.h
Previous file: linux-2.4.20/include/asm-mips64/sibyte/sb1250_syncser.h
Back to the patch index
Back to the overall index
- Lines: 104
- Date:
Thu Nov 28 15:53:15 2002
- Orig file:
linux-2.4.19/include/asm-mips64/sibyte/sb1250_uart.h
- Orig date:
Fri Aug 2 17:39:45 2002
diff -urN linux-2.4.19/include/asm-mips64/sibyte/sb1250_uart.h linux-2.4.20/include/asm-mips64/sibyte/sb1250_uart.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* UART Constants File: sb1250_uart.h
- *
- * This module contains constants and macros useful for
+ *
+ * This module contains constants and macros useful for
* manipulating the SB1250's UARTs
*
- * SB1250 specification level: 01/02/2002
- *
- * Author: Mitch Lichtenberg (mitch@sibyte.com)
- *
- *********************************************************************
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ * Author: Mitch Lichtenberg (mpl@broadcom.com)
+ *
+ *********************************************************************
*
* Copyright 2000,2001
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -37,7 +37,7 @@
#include "sb1250_defs.h"
-/* **********************************************************************
+/* **********************************************************************
* DUART Registers
********************************************************************** */
@@ -144,7 +144,7 @@
#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
-#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
+#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
/*
* DUART Status Register (Table 10-6)
@@ -164,7 +164,7 @@
/*
* DUART Baud Rate Register (Table 10-7)
- * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_A
* Register: DUART_CLK_SEL_B
*/
@@ -229,6 +229,9 @@
#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3)
#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4,4)
+#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2)
+
/*
* DUART Interrupt Status Register (Table 10-16)
* Register: DUART_ISR
@@ -327,9 +330,20 @@
(chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
/*
- * XXX To be added: Synchronous Serial definitions
+ * Full Interrupt Control Register (PASS2)
*/
+#define S_DUART_SIG_FULL _SB_MAKE64(0)
+#define M_DUART_SIG_FULL _SB_MAKEMASK(4,S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x,S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x,S_DUART_SIG_FULL,M_DUART_SIG_FULL)
+
+#define S_DUART_INT_TIME _SB_MAKE64(4)
+#define M_DUART_INT_TIME _SB_MAKEMASK(4,S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x,S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x) _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
+
+
/* ********************************************************************** */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)