patch-2.4.20 linux-2.4.20/arch/mips/ddb5xxx/ddb5074/irq.c
Next file: linux-2.4.20/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
Previous file: linux-2.4.20/arch/mips/ddb5xxx/ddb5074/int-handler.S
Back to the patch index
Back to the overall index
- Lines: 175
- Date:
Thu Nov 28 15:53:09 2002
- Orig file:
linux-2.4.19/arch/mips/ddb5xxx/ddb5074/irq.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.19/arch/mips/ddb5xxx/ddb5074/irq.c linux-2.4.20/arch/mips/ddb5xxx/ddb5074/irq.c
@@ -0,0 +1,174 @@
+/*
+ * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/ptrace.h>
+#include <asm/nile4.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+#include <asm/ddb5xxx/ddb5074.h>
+
+
+extern void __init i8259_init(void);
+extern void init_i8259_irqs (void);
+extern void i8259_disable_irq(unsigned int irq_nr);
+extern void i8259_enable_irq(unsigned int irq_nr);
+
+extern asmlinkage void ddbIRQ(void);
+extern asmlinkage void i8259_do_irq(int irq, struct pt_regs *regs);
+extern asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+
+static struct irqaction irq_cascade = { no_action, 0, 0, "cascade", NULL, NULL };
+
+#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
+#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
+#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
+
+#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
+#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
+#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
+
+#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
+#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
+
+#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
+#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
+
+#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
+#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
+
+
+static void m1543_irq_setup(void)
+{
+ /*
+ * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
+ * the possible IO sources in the M1543 are in use by us. We will
+ * use the following mapping:
+ *
+ * IRQ1 - keyboard (default set by M1543)
+ * IRQ3 - reserved for UART B (default set by M1543) (note that
+ * the schematics for the DDB Vrc-5074 board seem to
+ * indicate that IRQ3 is connected to the DS1386
+ * watchdog timer interrupt output so we might have
+ * a conflict)
+ * IRQ4 - reserved for UART A (default set by M1543)
+ * IRQ5 - parallel (default set by M1543)
+ * IRQ8 - DS1386 time of day (RTC) interrupt
+ * IRQ12 - mouse
+ */
+
+ /*
+ * Assing mouse interrupt to IRQ12
+ */
+
+ /* Enter configuration mode */
+ outb(0x51, M1543_PNP_CONFIG);
+ outb(0x23, M1543_PNP_CONFIG);
+
+ /* Select logical device 7 (Keyboard) */
+ outb(0x07, M1543_PNP_INDEX);
+ outb(0x07, M1543_PNP_DATA);
+
+ /* Select IRQ12 */
+ outb(0x72, M1543_PNP_INDEX);
+ outb(0x0c, M1543_PNP_DATA);
+
+ outb(0x30, M1543_PNP_INDEX);
+ printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA));
+
+ outb(0x70, M1543_PNP_INDEX);
+ printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA));
+
+ /* Leave configration mode */
+ outb(0xbb, M1543_PNP_CONFIG);
+
+
+}
+
+void ddb_local0_irqdispatch(struct pt_regs *regs)
+{
+ u32 mask;
+ int nile4_irq;
+
+ mask = nile4_get_irq_stat(0);
+
+ /* Handle the timer interrupt first */
+#if 0
+ if (mask & (1 << NILE4_INT_GPT)) {
+ do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
+ mask &= ~(1 << NILE4_INT_GPT);
+ }
+#endif
+ for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
+ if (mask & 1) {
+ if (nile4_irq == NILE4_INT_INTE) {
+ int i8259_irq;
+
+ nile4_clear_irq(NILE4_INT_INTE);
+ i8259_irq = nile4_i8259_iack();
+ do_IRQ(i8259_irq, regs);
+ } else
+ do_IRQ(nile4_to_irq(nile4_irq), regs);
+
+ }
+}
+
+void ddb_local1_irqdispatch(void)
+{
+ printk("ddb_local1_irqdispatch called\n");
+}
+
+void ddb_buserror_irq(void)
+{
+ printk("ddb_buserror_irq called\n");
+}
+
+void ddb_8254timer_irq(void)
+{
+ printk("ddb_8254timer_irq called\n");
+}
+
+void __init ddb_irq_setup(void)
+{
+#ifdef CONFIG_REMOTE_DEBUG
+ if (remote_debug)
+ set_debug_traps();
+ breakpoint(); /* you may move this line to whereever you want :-) */
+#endif
+
+ /* setup cascade interrupts */
+ setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
+
+ set_except_vector(0, ddbIRQ);
+
+ nile4_irq_setup(NILE4_IRQ_BASE);
+ m1543_irq_setup();
+ init_i8259_irqs();
+
+
+ printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
+
+ mips_cpu_irq_init(CPU_IRQ_BASE);
+
+ printk("enabling 8259 cascade\n");
+
+ ddb5074_led_hex(0);
+
+ /* Enable the interrupt cascade */
+ nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
+
+
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)