patch-2.4.20 linux-2.4.20/arch/mips/config-shared.in

Next file: linux-2.4.20/arch/mips/config.in
Previous file: linux-2.4.20/arch/mips/cobalt/via.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/mips/config-shared.in linux-2.4.20/arch/mips/config-shared.in
@@ -0,0 +1,803 @@
+mainmenu_name "Linux/MIPS Kernel Configuration"
+
+mainmenu_option next_comment
+comment 'Code maturity level options'
+bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
+endmenu
+
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
+   bool '  Kernel module loader' CONFIG_KMOD
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'Machine selection'
+dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
+dep_bool 'Support for Alchemy Semi PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32
+if [ "$CONFIG_MIPS_PB1000" = "y" ]; then
+   bool '  Support for PCI AUTO Config' CONFIG_PCI_AUTO
+fi
+dep_bool 'Support for Alchemy Semi PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
+dep_bool 'Support for Alchemy Semi PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
+dep_bool 'Support for Algorithmics P4032 (EXPERIMENTAL)' CONFIG_ALGOR_P4032 $CONFIG_EXPERIMENTAL
+dep_bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
+dep_bool 'Support for Cobalt Server (EXPERIMENTAL)' CONFIG_MIPS_COBALT $CONFIG_EXPERIMENTAL
+dep_bool 'Support for DECstations' CONFIG_DECSTATION $CONFIG_MIPS32
+dep_bool 'Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV64120 $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
+   bool '  Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
+   choice '  Galileo Chip Clock' \
+	"75	CONFIG_SYSCLK_75 \
+	 83.3	CONFIG_SYSCLK_83 \
+	 100	CONFIG_SYSCLK_100" 83.3
+fi
+dep_bool 'Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV96100 $CONFIG_EXPERIMENTAL
+bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR
+bool 'Support for Hewlett Packard LaserJet board' CONFIG_HP_LASERJET
+bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172
+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
+   bool '  Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC
+fi
+dep_bool 'Support for MIPS Atlas board (EXPERIMENTAL)' CONFIG_MIPS_ATLAS $CONFIG_EXPERIMENTAL
+bool 'Support for MIPS Magnum 4000' CONFIG_MIPS_MAGNUM_4000
+dep_bool 'Support for MIPS Malta board (EXPERIMENTAL)' CONFIG_MIPS_MALTA $CONFIG_EXPERIMENTAL
+dep_bool 'Support for MIPS SEAD board (EXPERIMENTAL)' CONFIG_MIPS_SEAD $CONFIG_EXPERIMENTAL
+bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
+bool 'Support for Momentum Ocelot-G board' CONFIG_MOMENCO_OCELOT_G
+dep_bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074 $CONFIG_EXPERIMENTAL
+bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476
+bool 'Support for NEC DDB Vrc-5477' CONFIG_DDB5477
+if [ "$CONFIG_DDB5477" = "y" ]; then
+   int '   bus frequency (in kHZ, 0 for auto-detect)' CONFIG_DDB5477_BUS_FREQUENCY 0
+fi
+bool 'Support for NEC Osprey board' CONFIG_NEC_OSPREY
+bool 'Support for NEC Eagle/Hawk board' CONFIG_NEC_EAGLE
+bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
+dep_bool 'Support for Philips Nino (EXPERIMENTAL)' CONFIG_NINO $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_NINO" = "y" ]; then
+   choice 'Nino Model Number' \
+	"Model-300/301/302/319			CONFIG_NINO_4MB \
+	 Model-200/210/312/320/325/350/390	CONFIG_NINO_8MB \
+	 Model-500/510				CONFIG_NINO_16MB" Model-200
+fi
+bool 'Support for SGI IP22 (Indy/Indigo2)' CONFIG_SGI_IP22
+dep_bool 'Support for SGI-IP27 (Origin200/2000)' CONFIG_SGI_IP27 $CONFIG_MIPS64
+if [ "$CONFIG_SGI_IP27" = "y" ]; then
+   bool '  IP27 N-Mode' CONFIG_SGI_SN0_N_MODE
+   bool '  Discontiguous Memory Support' CONFIG_DISCONTIGMEM
+   bool '  NUMA Support' CONFIG_NUMA
+   bool '  Mapped kernel support' CONFIG_MAPPED_KERNEL
+   bool '  Kernel text replication support' CONFIG_REPLICATE_KTEXT
+   bool '  Exception handler replication support' CONFIG_REPLICATE_EXHANDLERS
+   bool '  Multi-Processing support' CONFIG_SMP
+   #bool '  IP27 XXL' CONFIG_SGI_SN0_XXL
+fi
+dep_bool 'Support for SGI-IP32 (O2) (EXPERIMENTAL)' CONFIG_SGI_IP32 $CONFIG_EXPERIMENTAL
+dep_bool 'Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)' CONFIG_SIBYTE_SB1xxx_SOC $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
+   choice '   BCM1xxx SOC Type' \
+	  "BCM1250          CONFIG_SIBYTE_SB1250" BCM1250
+
+   bool '   Running under simulation' CONFIG_SIMULATION
+   bool '   Booting from CFE' CONFIG_SIBYTE_CFE
+   dep_bool '     Use firmware console' CONFIG_SIBYTE_CFE_CONSOLE $CONFIG_SIBYTE_CFE
+   if [ "$CONFIG_SIBYTE_CFE" = "n" ]; then
+      define_bool CONFIG_SIBYTE_STANDALONE y
+      int  '   Memory size (in megabytes)' CONFIG_SIBYTE_STANDALONE_RAM_SIZE 32
+   fi
+
+   bool '   Support for SB1/SOC profiling - SB1/SCD perf counters' CONFIG_SIBYTE_SB1250_PROF
+   bool '   Support for ZBbus profiling' CONFIG_BCM1250_TBPROF
+
+   if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
+      if [ "$CONFIG_SIBYTE_STANDALONE" != "y" ]; then
+	 bool '   Multi-Processing support' CONFIG_SMP
+      fi
+   fi
+
+   if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
+      bool '   Support for BCM1250/BCM112x onchip PCI controller' CONFIG_PCI
+   fi
+
+   if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
+      bool '   Support for SWARM board' CONFIG_SIBYTE_SWARM
+   fi
+fi
+bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
+dep_bool 'Support for Toshiba JMR-TX3927 board' CONFIG_TOSHIBA_JMR3927 $CONFIG_MIPS32
+bool 'Support for ZAO Networks Capcella' CONFIG_ZAO_CAPCELLA
+
+dep_bool 'High Memory Support' CONFIG_HIGHMEM $CONFIG_MIPS32
+
+define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
+define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
+
+#
+# Select some configuration options automatically based on user selections.
+#
+
+if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
+   define_bool CONFIG_ARC32 y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_ISA y
+   define_bool CONFIG_MIPS_JAZZ y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_ROTTEN_IRQ y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_MIPS_PB1000" = "y" ]; then
+   define_bool CONFIG_MIPS_AU1000 y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_AU1000_USB_DEVICE y
+fi
+if [ "$CONFIG_MIPS_PB1100" = "y" ]; then
+   define_bool CONFIG_MIPS_AU1000 y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_PCI_AUTO n
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_AU1000_USB_DEVICE y
+fi
+if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
+   define_bool CONFIG_MIPS_AU1000 y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_AU1000_USB_DEVICE y
+fi
+if [ "$CONFIG_ALGOR_P4032" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_MIPS_COBALT" = "y" ]; then
+   define_bool CONFIG_COBALT_LCD y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+fi
+if [ "$CONFIG_DECSTATION" = "y" ]; then
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NONCOHERENT_IO y
+fi
+if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_ISA n
+   define_bool CONFIG_MIPS_GT64120 y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_MIPS_GT96100 y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_SWAP_IO_SPACE y
+fi
+if [ "$CONFIG_MIPS_IVR" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_IT8172_CIR y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+fi
+if [ "$CONFIG_HP_LASERJET" = "y" ]; then
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI y
+   #not yet define_bool CONFIG_PCI_AUTO y
+fi
+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_IT8712 y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_IT8172_CIR y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+fi
+if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then
+   define_bool CONFIG_BOOT_ELF32 y
+   define_int CONFIG_L1_CACHE_SHIFT 5
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_SWAP_IO_SPACE y
+fi
+if [ "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
+     "$CONFIG_OLIVETTI_M700"    = "y" ]; then
+   define_bool CONFIG_ARC32 y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_ISA y
+   define_bool CONFIG_FB y
+   define_bool CONFIG_FB_G364 y
+   define_bool CONFIG_MIPS_JAZZ y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_MIPS_MALTA" = "y" ]; then
+   define_bool CONFIG_BOOT_ELF32 y
+   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
+   define_bool CONFIG_I8259 y
+   define_int CONFIG_L1_CACHE_SHIFT 5
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_PCI y
+fi
+if [ "$CONFIG_MIPS_SEAD" = "y" ]; then
+   define_int CONFIG_L1_CACHE_SHIFT 5
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI n
+fi
+if [ "$CONFIG_MOMENCO_OCELOT" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_SYSCLK_100 y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_MOMENCO_OCELOT_G" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_SYSCLK_100 y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_OLD_TIME_C y
+fi
+if [ "$CONFIG_DDB5074" = "y" ]; then
+   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_ISA y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_PCI y
+fi
+if [ "$CONFIG_DDB5476"  = "y" ]; then
+   define_bool CONFIG_ISA y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+fi
+if [ "$CONFIG_DDB5477" = "y" ]; then
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_DUMMY_KEYB y
+   define_bool CONFIG_I8259 y
+fi
+if [ "$CONFIG_NEC_OSPREY" = "y" ]; then
+   define_bool CONFIG_VR4181 y
+   define_bool CONFIG_SERIAL y
+   define_bool CONFIG_SERIAL_MANY_PORTS y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_DUMMY_KEYB y
+   define_bool CONFIG_SCSI n
+fi
+if [ "$CONFIG_NEC_EAGLE" = "y" ]; then
+   define_bool CONFIG_CPU_VR41XX y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_VR41XX_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_ISA n
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_DUMMY_KEYB y
+   define_bool CONFIG_SCSI n
+fi
+if [ "$CONFIG_NINO" = "y" ]; then
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+fi
+if [ "$CONFIG_SGI_IP22" = "y" ]; then
+   define_bool CONFIG_ARC32 y
+   define_bool CONFIG_ARC_CONSOLE y
+   define_bool CONFIG_ARC_MEMORY y
+   define_bool CONFIG_BOARD_SCACHE y
+   define_bool CONFIG_BOOT_ELF32 y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_IRQ_CPU y
+   define_int CONFIG_L1_CACHE_SHIFT 5
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_SGI y
+fi
+if [ "$CONFIG_SGI_IP27" = "y" ]; then
+   define_bool CONFIG_BOOT_ELF64 y
+   define_bool CONFIG_ARC64 y
+   #define_bool CONFIG_MAPPED_PCI_IO y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_QL_ISP_A64 y
+   define_int CONFIG_L1_CACHE_SHIFT 7
+fi
+if [ "$CONFIG_SGI_IP32" = "y" ]; then
+   define_bool CONFIG_ARC_MEMORY y
+   define_bool CONFIG_ARC32 y
+   #define_bool CONFIG_BOARD_SCACHE y
+   define_bool CONFIG_BOOT_ELF32 y
+   define_int CONFIG_L1_CACHE_SHIFT 5
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_PCI y
+fi
+if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_DUMMY_KEYB y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_BOOT_ELF32 y
+fi
+if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
+   define_bool CONFIG_ARC32 y
+   define_bool CONFIG_ARC_MEMORY y
+   define_bool CONFIG_I8259 y
+   define_bool CONFIG_ISA y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_OLD_TIME_C y
+   define_bool CONFIG_PC_KEYB y
+   define_bool CONFIG_PCI y
+fi
+if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
+   define_bool CONFIG_TOSHIBA_BOARDS y
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_SWAP_IO_SPACE y
+   define_bool CONFIG_PC_KEYB y
+fi
+if [ "$CONFIG_ZAO_CAPCELLA" = "y" ]; then
+   define_bool CONFIG_CPU_VR41XX y
+   define_bool CONFIG_CPU_LITTLE_ENDIAN y
+   define_bool CONFIG_NEW_IRQ y
+   define_bool CONFIG_IRQ_CPU y
+   define_bool CONFIG_NEW_TIME_C y
+   define_bool CONFIG_VR41XX_TIME_C y
+   define_bool CONFIG_NONCOHERENT_IO y
+   define_bool CONFIG_ISA n
+   define_bool CONFIG_PCI y
+   define_bool CONFIG_NEW_PCI y
+   define_bool CONFIG_PCI_AUTO y
+   define_bool CONFIG_DUMMY_KEYB y
+   define_bool CONFIG_SCSI n
+fi
+
+if [ "$CONFIG_MIPS_AU1000" != "y" ]; then
+   define_bool CONFIG_MIPS_AU1000 n
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'CPU selection'
+
+choice 'CPU type' \
+	"MIPS32	CONFIG_CPU_MIPS32 \
+	 MIPS64	CONFIG_CPU_MIPS64 \
+	 R3000	CONFIG_CPU_R3000 \
+	 R39XX	CONFIG_CPU_TX39XX \
+	 R41xx	CONFIG_CPU_VR41XX \
+	 R4300	CONFIG_CPU_R4300 \
+	 R4x00	CONFIG_CPU_R4X00 \
+	 R49XX	CONFIG_CPU_TX49XX \
+	 R5000	CONFIG_CPU_R5000 \
+	 R5432	CONFIG_CPU_R5432 \
+	 R6000	CONFIG_CPU_R6000 \
+	 R52xx	CONFIG_CPU_NEVADA \
+	 R8000	CONFIG_CPU_R8000 \
+	 R10000	CONFIG_CPU_R10000 \
+	 RM7000	CONFIG_CPU_RM7000 \
+	 SB1	CONFIG_CPU_SB1" R4x00
+
+if [ "$CONFIG_CPU_R5000" = "y" ]; then
+   define_bool CONFIG_BOARD_SCACHE y
+fi
+
+if [ "$CONFIG_CPU_NEVADA" = "y" ]; then
+   define_bool CONFIG_BOARD_SCACHE y
+fi
+ 
+if [ "$CONFIG_CPU_MIPS32" = "y" ]; then
+   define_bool CONFIG_CPU_HAS_PREFETCH y
+   bool '  Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE
+fi
+
+if [ "$CONFIG_CPU_MIPS64" = "y" ]; then
+   define_bool CONFIG_CPU_HAS_PREFETCH y
+   bool '  Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE
+fi
+
+if [ "$CONFIG_CPU_RM7000" = "y" ]; then
+   define_bool CONFIG_CPU_HAS_PREFETCH y
+fi
+
+if [ "$CONFIG_CPU_SB1" = "y" ]; then
+   choice 'SB1 Pass' \
+	 "Pass1   CONFIG_CPU_SB1_PASS_1  \
+	  Pass2   CONFIG_CPU_SB1_PASS_2
+	  Pass2.2 CONFIG_CPU_SB1_PASS_2_2" Pass1
+   if [ "$CONFIG_CPU_SB1_PASS_1" = "y" ]; then
+      define_bool CONFIG_SB1_PASS_1_WORKAROUNDS y
+   fi
+   if [ "$CONFIG_CPU_SB1_PASS_2" = "y" ]; then
+      define_bool CONFIG_SB1_PASS_2_WORKAROUNDS y
+   else
+      # Avoid prefetches on Pass 2 (before 2.2)
+      bool '  Enable prefetches' CONFIG_CPU_HAS_PREFETCH
+   fi
+   if [ "$CONFIG_CPU_SB1_PASS_2_2" = "y" ]; then
+      # XXXKW for now, let 2.2 use same WORKAROUNDS flag as pre-2.2
+      define_bool CONFIG_SB1_PASS_2_WORKAROUNDS y
+   fi
+   bool '  Support for SB1 Cache Error handler' CONFIG_SB1_CACHE_ERROR
+   dep_bool '    Ignore recoverable cache errors' CONFIG_SB1_CERR_IGNORE_RECOVERABLE $CONFIG_SB1_CACHE_ERROR
+   dep_bool '    Spin instead of running handler' CONFIG_SB1_CERR_SPIN $CONFIG_SB1_CACHE_ERROR
+   define_bool CONFIG_VTAG_ICACHE y
+fi
+
+if [ "$CONFIG_CPU_R4X00"  = "y" -o \
+     "$CONFIG_CPU_R5000"  = "y" -o \
+     "$CONFIG_CPU_RM7000" = "y" -o \
+     "$CONFIG_CPU_R10000" = "y" -o \
+     "$CONFIG_CPU_SB1"    = "y" -o \
+     "$CONFIG_CPU_MIPS32" = "y" -o \
+     "$CONFIG_CPU_MIPS64" = "y" ]; then
+   dep_bool '  Support for 64-bit physical address space' CONFIG_64BIT_PHYS_ADDR $CONFIG_MIPS32
+fi
+
+dep_bool 'Override CPU Options' CONFIG_CPU_ADVANCED $CONFIG_MIPS32
+if [ "$CONFIG_CPU_ADVANCED" = "y" ]; then
+   bool '  ll/sc Instructions available' CONFIG_CPU_HAS_LLSC
+   bool '  lld/scd Instructions available' CONFIG_CPU_HAS_LLDSCD
+   bool '  Writeback Buffer available' CONFIG_CPU_HAS_WB
+else
+   if [ "$CONFIG_CPU_R3000"  = "y" -o \
+        "$CONFIG_CPU_VR41XX" = "y" -o \
+        "$CONFIG_CPU_TX39XX" = "y" ]; then
+      if [ "$CONFIG_DECSTATION" = "y" ]; then
+	 define_bool CONFIG_CPU_HAS_LLSC n
+	 define_bool CONFIG_CPU_HAS_LLDSCD n
+	 define_bool CONFIG_CPU_HAS_WB y
+      else
+	 define_bool CONFIG_CPU_HAS_LLSC n
+	 define_bool CONFIG_CPU_HAS_LLDSCD n
+	 define_bool CONFIG_CPU_HAS_WB n
+      fi
+   else
+      if [ "$CONFIG_CPU_MIPS32" = "y" ]; then
+	 define_bool CONFIG_CPU_HAS_LLSC y
+	 define_bool CONFIG_CPU_HAS_LLDSCD n
+	 define_bool CONFIG_CPU_HAS_WB n
+      else
+	 define_bool CONFIG_CPU_HAS_LLSC y
+	 define_bool CONFIG_CPU_HAS_LLDSCD y
+	 define_bool CONFIG_CPU_HAS_WB n
+      fi
+   fi
+fi
+if [ "$CONFIG_CPU_R3000" = "y" ]; then
+   define_bool CONFIG_CPU_HAS_SYNC n
+else
+   define_bool CONFIG_CPU_HAS_SYNC y
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'General setup'
+if [ "$CONFIG_DECSTATION"  = "y" -o \
+     "$CONFIG_DDB5074"     = "y" -o \
+     "$CONFIG_NINO"        = "y" -o \
+     "$CONFIG_MIPS_COBALT" = "y" ]; then
+   define_bool CONFIG_CPU_LITTLE_ENDIAN y
+else
+   bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
+fi
+
+if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
+   bool 'DS1742 BRAM/RTC support' CONFIG_RTC_DS1742
+fi
+
+if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
+   bool 'Include IRIX binary compatibility' CONFIG_BINFMT_IRIX
+   bool 'Include forward keyboard' CONFIG_FORWARD_KEYBOARD
+fi
+
+if [ "$CONFIG_CPU_R10000" = "y" ]; then
+   dep_bool 'Support for large 64-bit configurations' CONFIG_MIPS_INSANE_LARGE $CONFIG_MIPS64
+fi
+
+if [ "$CONFIG_ARC32" = "y" ]; then
+   bool 'ARC console support' CONFIG_ARC_CONSOLE
+fi
+
+if [ "$CONFIG_SGI_IP22" = "y" ]; then
+   dep_bool 'Indigo-2 (IP22) EISA bus support' CONFIG_IP22_EISA $CONFIG_EXPERIMENTAL
+fi
+
+if [ "$CONFIG_IP22_EISA" = "y" ]; then
+   define_bool CONFIG_EISA y
+   bool '    ISA bus support' CONFIG_ISA
+fi
+
+bool 'Networking support' CONFIG_NET
+
+if [ "$CONFIG_PCI" != "y" ]; then
+   define_bool CONFIG_PCI n
+fi
+
+source drivers/pci/Config.in
+
+if [ "$CONFIG_ISA" != "y" ]; then
+   define_bool CONFIG_ISA n
+   define_bool CONFIG_EISA n
+else
+   define_bool CONFIG_EISA y
+fi
+
+dep_bool 'TURBOchannel support' CONFIG_TC $CONFIG_DECSTATION
+#dep_bool 'Access.Bus support' CONFIG_ACCESSBUS $CONFIG_TC
+
+define_bool CONFIG_MCA n
+define_bool CONFIG_SBUS n
+
+bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
+
+if [ "$CONFIG_HOTPLUG" = "y" ] ; then
+   source drivers/pcmcia/Config.in
+   source drivers/hotplug/Config.in
+else
+   define_bool CONFIG_PCMCIA n
+   define_bool CONFIG_HOTPLUG_PCI n
+fi
+
+bool 'System V IPC' CONFIG_SYSVIPC
+bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
+bool 'Sysctl support' CONFIG_SYSCTL
+define_bool CONFIG_KCORE_ELF y
+define_bool CONFIG_KCORE_AOUT n
+define_bool CONFIG_BINFMT_AOUT n
+tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+dep_bool 'Kernel support for Linux/MIPS 32-bit binary compatibility' CONFIG_MIPS32_COMPAT $CONFIG_MIPS64
+define_bool CONFIG_BINFMT_ELF32 $CONFIG_MIPS32_COMPAT
+
+tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
+
+dep_bool 'Power Management support (EXPERIMENTAL)' CONFIG_PM $CONFIG_EXPERIMENTAL $CONFIG_MIPS_AU1000
+endmenu
+
+source drivers/mtd/Config.in
+
+source drivers/parport/Config.in
+
+source drivers/pnp/Config.in
+
+source drivers/block/Config.in
+if [ "$CONFIG_BLK_DEV_INITRD" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'MIPS initrd options'
+   bool '  Embed root filesystem ramdisk into the kernel' CONFIG_EMBEDDED_RAMDISK
+   endmenu
+fi
+
+source drivers/md/Config.in
+
+if [ "$CONFIG_NET" = "y" ]; then
+   source net/Config.in
+fi
+
+source drivers/telephony/Config.in
+
+mainmenu_option next_comment
+comment 'ATA/IDE/MFM/RLL support'
+
+tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
+
+if [ "$CONFIG_IDE" != "n" ]; then
+   source drivers/ide/Config.in
+else
+   define_bool CONFIG_BLK_DEV_IDE_MODES n
+   define_bool CONFIG_BLK_DEV_HD n
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'SCSI support'
+
+tristate 'SCSI support' CONFIG_SCSI
+
+if [ "$CONFIG_SCSI" != "n" ]; then
+   source drivers/scsi/Config.in
+fi
+endmenu
+
+if [ "$CONFIG_PCI" = "y" ]; then
+   source drivers/message/i2o/Config.in
+fi
+
+if [ "$CONFIG_NET" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'Network device support'
+
+   bool 'Network device support' CONFIG_NETDEVICES
+   if [ "$CONFIG_NETDEVICES" = "y" ]; then
+      source drivers/net/Config.in
+      if [ "$CONFIG_ATM" = "y" ]; then
+	 source drivers/atm/Config.in
+      fi
+   fi
+   endmenu
+fi
+
+source net/ax25/Config.in
+
+source net/irda/Config.in
+
+if [ "$CONFIG_NET" != "n" ]; then
+   mainmenu_option next_comment
+   comment 'ISDN subsystem'
+
+   tristate 'ISDN support' CONFIG_ISDN
+   if [ "$CONFIG_ISDN" != "n" ]; then
+      source drivers/isdn/Config.in
+   fi
+   endmenu
+fi
+
+if [ "$CONFIG_ISA" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'Old CD-ROM drivers (not SCSI, not IDE)'
+
+   bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
+   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
+      source drivers/cdrom/Config.in
+   fi
+   endmenu
+fi
+
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source drivers/input/Config.in
+source drivers/char/Config.in
+
+#source drivers/misc/Config.in
+
+if [ "$CONFIG_DECSTATION" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'DECStation Character devices'
+
+   tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
+   dep_bool '  DZ11 Serial Support' CONFIG_DZ $CONFIG_SERIAL
+   dep_bool '  Z85C30 Serial Support' CONFIG_ZS $CONFIG_SERIAL $CONFIG_TC
+   dep_bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE $CONFIG_SERIAL
+#   dep_bool 'MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
+   bool 'Enhanced Real Time Clock Support' CONFIG_RTC
+   endmenu
+fi
+
+if [ "$CONFIG_SGI_IP22" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'SGI Character devices'
+   if [ "$CONFIG_VT" = "y" ]; then
+      tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
+      if [ "$CONFIG_SGI_NEWPORT_CONSOLE" = "y" ]; then
+	 define_bool CONFIG_FONT_8x16 y
+      fi
+      define_bool CONFIG_DUMMY_CONSOLE y
+   fi
+   endmenu
+fi
+
+source fs/Config.in
+
+source drivers/media/Config.in
+
+if [ "$CONFIG_VT" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'Console drivers'
+   bool 'VGA text console' CONFIG_VGA_CONSOLE
+   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE
+      source drivers/video/Config.in
+   fi
+   endmenu
+fi
+
+mainmenu_option next_comment
+comment 'Sound'
+
+tristate 'Sound card support' CONFIG_SOUND
+if [ "$CONFIG_SOUND" != "n" ]; then
+   source drivers/sound/Config.in
+fi
+endmenu
+
+if [ "$CONFIG_SGI_IP22" = "y" ]; then
+   source drivers/sgi/Config.in
+fi
+
+source drivers/usb/Config.in
+
+source net/bluetooth/Config.in
+
+mainmenu_option next_comment
+comment 'Kernel hacking'
+
+bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
+if [ "$CONFIG_SERIAL" = "y" -o "$CONFIG_AU1000_UART" = "y" ]; then
+   bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
+   dep_bool 'Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_REMOTE_DEBUG
+fi
+bool 'Enable run-time debugging' CONFIG_DEBUG
+bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
+if [ "$CONFIG_SMP" != "y" ]; then
+   bool 'Run uncached' CONFIG_MIPS_UNCACHED
+fi
+endmenu
+
+source lib/Config.in
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)