patch-2.4.20 linux-2.4.20/arch/m68k/config.in
Next file: linux-2.4.20/arch/m68k/hp300/config.c
Previous file: linux-2.4.20/arch/m68k/bvme6000/rtc.c
Back to the patch index
Back to the overall index
- Lines: 157
- Date:
Thu Nov 28 15:53:09 2002
- Orig file:
linux-2.4.19/arch/m68k/config.in
- Orig date:
Fri Aug 2 17:39:43 2002
diff -urN linux-2.4.19/arch/m68k/config.in linux-2.4.20/arch/m68k/config.in
@@ -141,7 +141,7 @@
fi
dep_tristate ' Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
if [ "$CONFIG_PRINTER" != "n" ]; then
- bool ' Support IEEE1284 status readback' CONFIG_PARPORT_1284
+ bool ' IEEE 1284 transfer modes' CONFIG_PARPORT_1284
fi
fi
@@ -376,6 +376,11 @@
mainmenu_option next_comment
comment 'Character devices'
+bool 'Virtual terminal' CONFIG_VT
+if [ "$CONFIG_VT" = "y" ]; then
+ bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
+fi
+
if [ "$CONFIG_Q40" = "y" ]; then
tristate 'Q40 Standard/generic serial support' CONFIG_SERIAL
fi
@@ -391,13 +396,6 @@
bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi
-if [ "$CONFIG_VME" = "n" ]; then
- define_bool CONFIG_VT y
- if [ "$CONFIG_VT" = "y" ]; then
- bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
- fi
-fi
-
if [ "$CONFIG_ATARI" = "y" ]; then
define_bool CONFIG_NVRAM y
fi
@@ -408,7 +406,7 @@
define_bool CONFIG_BUSMOUSE y
fi
fi
-if [ "$CONFIG_ATARI" = "y" ]; then
+if [ "$CONFIG_ATARI" = "y" -a "$CONFIG_VT" = "y" ]; then
tristate 'Atari mouse support' CONFIG_ATARIMOUSE
if [ "$CONFIG_ATARIMOUSE" != "n" ]; then
define_bool CONFIG_BUSMOUSE y
@@ -430,16 +428,16 @@
if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
fi
+ tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
+ fi
fi
if [ "$CONFIG_PARPORT" = "n" ]; then
if [ "$CONFIG_ZORRO" = "y" ]; then
tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
dep_tristate ' GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
dep_tristate ' GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
- tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
- fi
fi
fi
if [ "$CONFIG_MAC" = "y" ]; then
@@ -464,6 +462,20 @@
if [ "$CONFIG_HP300" = "y" -a "$CONFIG_DIO" = "y" ]; then
tristate 'HP DCA serial support' CONFIG_HPDCA
fi
+if [ "$CONFIG_MVME147" = "y" ]; then
+ bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
+fi
+if [ "$CONFIG_MVME16x" = "y" ]; then
+ bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
+ bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
+fi
+if [ "$CONFIG_BVME6000" = "y" ]; then
+ bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
+fi
+if [ "$CONFIG_APOLLO" = "y" ]; then
+ bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL
+ define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL
+fi
if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
bool 'Sun3/3x builtin serial support' CONFIG_SUN3X_ZS
@@ -483,37 +495,16 @@
define_bool CONFIG_SBUS n
fi
-if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" -o \
- "$CONFIG_MAC" = "y" -o "$CONFIG_HP300" = "y" -o \
- "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
- if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
- "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
- "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o \
- "$CONFIG_GVPIOEXT" = "y" -o "$CONFIG_MULTIFACE_III_TTY" = "y" -o \
- "$CONFIG_HPDCA" = "y" -o "$CONFIG_SUN3X_ZS" = "y" -o \
- "$CONFIG_SERIAL" = "y" ]; then
- bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
- fi
-fi
-if [ "$CONFIG_VME" = "y" ]; then
- define_bool CONFIG_SERIAL_CONSOLE y
- if [ "$CONFIG_MVME147" = "y" ]; then
- bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
- fi
- if [ "$CONFIG_MVME16x" = "y" ]; then
- bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
- bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
- fi
- if [ "$CONFIG_BVME6000" = "y" ]; then
- bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
- fi
-fi
-if [ "$CONFIG_APOLLO" = "y" ]; then
- bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL
+if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
+ "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
+ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o "$CONFIG_GVPIOEXT" = "y" -o \
+ "$CONFIG_MULTIFACE_III_TTY" = "y" -o "$CONFIG_HPDCA" = "y" -o \
+ "$CONFIG_SUN3X_ZS" = "y" -o "$CONFIG_SERIAL" = "y" -o \
+ "$CONFIG_MVME147_SCC" -o "$CONFIG_SERIAL167" = "y" -o \
+ "$CONFIG_MVME162_SCC" -o "$CONFIG_BVME6000_SCC" = "y" -o \
+ "$CONFIG_DN_SERIAL" -o ]; then
bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
-
- define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL
-fi
+fi
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support' CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
@@ -539,7 +530,7 @@
mainmenu_option next_comment
comment 'Sound support'
-tristate 'Sound support' CONFIG_SOUND
+tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
source drivers/sound/dmasound/Config.in
fi
@@ -547,7 +538,7 @@
source fs/Config.in
-if [ "$CONFIG_VME" = "n" ]; then
+if [ "$CONFIG_VT" = "y" ]; then
mainmenu_option next_comment
comment 'Console drivers'
source drivers/video/Config.in
@@ -565,3 +556,5 @@
fi
endmenu
+
+source lib/Config.in
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)