patch-2.4.19 linux-2.4.19/include/asm-mips/sibyte/sb1250_uart.h
Next file: linux-2.4.19/include/asm-mips/sibyte/swarm.h
Previous file: linux-2.4.19/include/asm-mips/sibyte/sb1250_syncser.h
Back to the patch index
Back to the overall index
- Lines: 337
- Date:
Fri Aug 2 17:39:45 2002
- Orig file:
linux-2.4.18/include/asm-mips/sibyte/sb1250_uart.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.18/include/asm-mips/sibyte/sb1250_uart.h linux-2.4.19/include/asm-mips/sibyte/sb1250_uart.h
@@ -0,0 +1,336 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * UART Constants File: sb1250_uart.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the SB1250's UARTs
+ *
+ * SB1250 specification level: 01/02/2002
+ *
+ * Author: Mitch Lichtenberg (mitch@sibyte.com)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_UART_H
+#define _SB1250_UART_H
+
+#include "sb1250_defs.h"
+
+/* **********************************************************************
+ * DUART Registers
+ ********************************************************************** */
+
+/*
+ * DUART Mode Register #1 (Table 10-3)
+ * Register: DUART_MODE_REG_1_A
+ * Register: DUART_MODE_REG_1_B
+ */
+
+#define S_DUART_BITS_PER_CHAR 0
+#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2,S_DUART_BITS_PER_CHAR)
+#define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x,S_DUART_BITS_PER_CHAR)
+
+#define K_DUART_BITS_PER_CHAR_RSV0 0
+#define K_DUART_BITS_PER_CHAR_RSV1 1
+#define K_DUART_BITS_PER_CHAR_7 2
+#define K_DUART_BITS_PER_CHAR_8 3
+
+#define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
+#define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
+#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+
+
+#define M_DUART_PARITY_TYPE_EVEN 0x00
+#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2)
+
+#define S_DUART_PARITY_MODE 3
+#define M_DUART_PARITY_MODE _SB_MAKEMASK(2,S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x,S_DUART_PARITY_MODE)
+
+#define K_DUART_PARITY_MODE_ADD 0
+#define K_DUART_PARITY_MODE_ADD_FIXED 1
+#define K_DUART_PARITY_MODE_NONE 2
+
+#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
+#define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
+
+#define M_DUART_ERR_MODE _SB_MAKEMASK1(5) /* must be zero */
+
+#define M_DUART_RX_IRQ_SEL_RXRDY 0
+#define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6)
+
+#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7)
+
+/*
+ * DUART Mode Register #2 (Table 10-4)
+ * Register: DUART_MODE_REG_2_A
+ * Register: DUART_MODE_REG_2_B
+ */
+
+#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3,0) /* ignored */
+
+#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1 0
+
+#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4)
+
+#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */
+
+#define S_DUART_CHAN_MODE 6
+#define M_DUART_CHAN_MODE _SB_MAKEMASK(2,S_DUART_CHAN_MODE)
+#define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x,S_DUART_CHAN_MODE)
+
+#define K_DUART_CHAN_MODE_NORMAL 0
+#define K_DUART_CHAN_MODE_LCL_LOOP 2
+#define K_DUART_CHAN_MODE_REM_LOOP 3
+
+#define V_DUART_CHAN_MODE_NORMAL V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL)
+#define V_DUART_CHAN_MODE_LCL_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP)
+#define V_DUART_CHAN_MODE_REM_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP)
+
+/*
+ * DUART Command Register (Table 10-5)
+ * Register: DUART_CMD_A
+ * Register: DUART_CMD_B
+ */
+
+#define M_DUART_RX_EN _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS _SB_MAKEMASK1(3)
+
+#define S_DUART_MISC_CMD 4
+#define M_DUART_MISC_CMD _SB_MAKEMASK(3,S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x,S_DUART_MISC_CMD)
+
+#define K_DUART_MISC_CMD_NOACTION0 0
+#define K_DUART_MISC_CMD_NOACTION1 1
+#define K_DUART_MISC_CMD_RESET_RX 2
+#define K_DUART_MISC_CMD_RESET_TX 3
+#define K_DUART_MISC_CMD_NOACTION4 4
+#define K_DUART_MISC_CMD_RESET_BREAK_INT 5
+#define K_DUART_MISC_CMD_START_BREAK 6
+#define K_DUART_MISC_CMD_STOP_BREAK 7
+
+#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
+#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+
+#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
+
+/*
+ * DUART Status Register (Table 10-6)
+ * Register: DUART_STATUS_A
+ * Register: DUART_STATUS_B
+ * READ-ONLY
+ */
+
+#define M_DUART_RX_RDY _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7)
+
+/*
+ * DUART Baud Rate Register (Table 10-7)
+ * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_B
+ */
+
+#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12,0)
+#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1)
+
+/*
+ * DUART Data Registers (Table 10-8 and 10-9)
+ * Register: DUART_RX_HOLD_A
+ * Register: DUART_RX_HOLD_B
+ * Register: DUART_TX_HOLD_A
+ * Register: DUART_TX_HOLD_B
+ */
+
+#define M_DUART_RX_DATA _SB_MAKEMASK(8,0)
+#define M_DUART_TX_DATA _SB_MAKEMASK(8,0)
+
+/*
+ * DUART Input Port Register (Table 10-10)
+ * Register: DUART_IN_PORT
+ */
+
+#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7)
+
+/*
+ * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
+ * Register: DUART_INPORT_CHNG
+ */
+
+#define S_DUART_IN_PIN_VAL 0
+#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4,S_DUART_IN_PIN_VAL)
+
+#define S_DUART_IN_PIN_CHNG 4
+#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4,S_DUART_IN_PIN_CHNG)
+
+/*
+ * DUART Output port control register (Table 10-14)
+ * Register: DUART_OPCR
+ */
+
+#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */
+#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */
+#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4,4) /* must be zero */
+
+/*
+ * DUART Aux Control Register (Table 10-15)
+ * Register: DUART_AUX_CTRL
+ */
+
+#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Interrupt Status Register (Table 10-16)
+ * Register: DUART_ISR
+ */
+
+#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX_A _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3)
+#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7)
+
+/*
+ * DUART Channel A Interrupt Status Register (Table 10-17)
+ * DUART Channel B Interrupt Status Register (Table 10-18)
+ * Register: DUART_ISR_A
+ * Register: DUART_ISR_B
+ */
+
+#define M_DUART_ISR_TX _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN _SB_MAKEMASK1(3)
+#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Interrupt Mask Register (Table 10-19)
+ * Register: DUART_IMR
+ */
+
+#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL_A _SB_MAKEMASK(4,0)
+
+#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Channel A Interrupt Mask Register (Table 10-20)
+ * DUART Channel B Interrupt Mask Register (Table 10-21)
+ * Register: DUART_IMR_A
+ * Register: DUART_IMR_B
+ */
+
+#define M_DUART_IMR_TX _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL _SB_MAKEMASK(4,0)
+#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4,4)
+
+
+/*
+ * DUART Output Port Set Register (Table 10-22)
+ * Register: DUART_SET_OPR
+ */
+
+#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Output Port Clear Register (Table 10-23)
+ * Register: DUART_CLEAR_OPR
+ */
+
+#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4,4)
+
+/*
+ * DUART Output Port RTS Register (Table 10-24)
+ * Register: DUART_OUT_PORT
+ */
+
+#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4,4)
+
+#define M_DUART_OUT_PIN_SET(chan) \
+ (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
+#define M_DUART_OUT_PIN_CLR(chan) \
+ (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
+
+/*
+ * XXX To be added: Synchronous Serial definitions
+ */
+
+/* ********************************************************************** */
+
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)