patch-2.4.19 linux-2.4.19/drivers/usb/ibmcam.h

• Lines: 241
• Date: Wed Dec 31 16:00:00 1969
• Orig file: linux-2.4.18/drivers/usb/ibmcam.h
• Orig date: Mon Dec 11 13:17:55 2000

diff -urN linux-2.4.18/drivers/usb/ibmcam.h linux-2.4.19/drivers/usb/ibmcam.h
@@ -1,240 +0,0 @@
-/*
- * Header file for USB IBM C-It Video Camera driver.
- *
- * Supports IBM C-It Video Camera.
- *
- * This driver is based on earlier work of:
- *
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- */
-
-#ifndef __LINUX_IBMCAM_H
-#define __LINUX_IBMCAM_H
-
-#include <linux/list.h>
-
-#define USES_IBMCAM_PUTPIXEL    0       /* 0=Fast/oops 1=Slow/secure */
-
-/* Video Size 384 x 288 x 3 bytes for RGB */
-/* 384 because xawtv tries to grab 384 even though we tell it 352 is our max */
-#define V4L_FRAME_WIDTH         384
-#define V4L_FRAME_WIDTH_USED	352
-#define V4L_FRAME_HEIGHT        288
-#define V4L_BYTES_PER_PIXEL     3
-#define MAX_FRAME_SIZE          (V4L_FRAME_WIDTH * V4L_FRAME_HEIGHT * V4L_BYTES_PER_PIXEL)
-
-/* Camera capabilities (maximum) */
-#define CAMERA_IMAGE_WIDTH      352
-#define CAMERA_IMAGE_HEIGHT     288
-#define CAMERA_IMAGE_LINE_SZ    ((CAMERA_IMAGE_WIDTH * 3) / 2) /* Bytes */
-#define CAMERA_URB_FRAMES       32
-#define CAMERA_MAX_ISO_PACKET   1023 /* 1022 actually sent by camera */
-
-#define IBMCAM_NUMFRAMES	2
-#define IBMCAM_NUMSBUF		2
-
-#define FRAMES_PER_DESC		(CAMERA_URB_FRAMES)
-#define FRAME_SIZE_PER_DESC	(CAMERA_MAX_ISO_PACKET)
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
-
-/*
- * This macro performs bounds checking - use it when working with
- * new formats, or else you may get oopses all over the place.
- * If pixel falls out of bounds then it gets shoved back (as close
- * to place of offence as possible) and is painted bright red.
- */
-#define IBMCAM_PUTPIXEL(fr, ix, iy, vr, vg, vb) { \
-	register unsigned char *pf; \
-	int limiter = 0, mx, my; \
-	mx = ix; \
-	my = iy; \
-	if (mx < 0) { \
-		mx=0; \
-		limiter++; \
-	} else if (mx >= 352) { \
-		mx=351; \
-		limiter++; \
-	} \
-	if (my < 0) { \
-		my = 0; \
-		limiter++; \
-	} else if (my >= V4L_FRAME_HEIGHT) { \
-		my = V4L_FRAME_HEIGHT - 1; \
-		limiter++; \
-	} \
-	pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*352 + (ix)); \
-	if (limiter) { \
-		*pf++ = 0; \
-		*pf++ = 0; \
-		*pf++ = 0xFF; \
-	} else { \
-		*pf++ = (vb); \
-		*pf++ = (vg); \
-		*pf++ = (vr); \
-	} \
-}
-
-/*
- * We use macros to do YUV -> RGB conversion because this is
- * very important for speed and totally unimportant for size.
- *
- * YUV -> RGB Conversion
- * ---------------------
- *
- * B = 1.164*(Y-16)		    + 2.018*(V-128)
- * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
- * R = 1.164*(Y-16) + 1.596*(U-128)
- *
- * If you fancy integer arithmetics (as you should), hear this:
- *
- * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
- * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
- * 65536*R = 76284*(Y-16) + 104595*(U-128)
- *
- * Make sure the output values are within [0..255] range.
- */
-#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
-    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
-    mm_y = (my) - 16;  \
-    mm_u = (mu) - 128; \
-    mm_v = (mv) - 128; \
-    mm_yc= mm_y * 76284; \
-    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
-    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
-    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
-    mb = LIMIT_RGB(mm_b); \
-    mg = LIMIT_RGB(mm_g); \
-    mr = LIMIT_RGB(mm_r); \
-}
-
-/* Debugging aid */
-#define IBMCAM_SAY_AND_WAIT(what) { \
-	wait_queue_head_t wq; \
-	init_waitqueue_head(&wq); \
-	printk(KERN_INFO "Say: %s\n", what); \
-	interruptible_sleep_on_timeout (&wq, HZ*3); \
-}
-
-/*
- * This macro checks if ibmcam is still operational. The 'ibmcam'
- * pointer must be valid, ibmcam->dev must be valid, we are not
- * removing the device and the device has not erred on us.
- */
-#define IBMCAM_IS_OPERATIONAL(ibm_cam) (\
-	(ibm_cam != NULL) && \
-	((ibm_cam)->dev != NULL) && \
-	((ibm_cam)->last_error == 0) && \
-	(!(ibm_cam)->remove_pending))
-
-enum {
-	STATE_SCANNING,		/* Scanning for header */
-	STATE_LINES,		/* Parsing lines */
-};
-
-enum {
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-	FRAME_READY,		/* Ready to start grabbing */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_ERROR,		/* Something bad happened while processing */
-};
-
-struct usb_device;
-
-struct ibmcam_sbuf {
-	char *data;
-	urb_t *urb;
-};
-
-struct ibmcam_frame {
-	char *data;		/* Frame buffer */
-	int order_uv;		/* True=UV False=VU */
-	int order_yc;		/* True=Yc False=cY ('c'=either U or V) */
-	unsigned char hdr_sig;	/* "00 FF 00 ??" where 'hdr_sig' is '??' */
-
-	int width;		/* Width application is expecting */
-	int height;		/* Height */
-
-	int frmwidth;		/* Width the frame actually is */
-	int frmheight;		/* Height */
-
-	volatile int grabstate;	/* State of grabbing */
-	int scanstate;		/* State of scanning */
-
-	int curline;		/* Line of frame we're working on */
-
-	long scanlength;	/* uncompressed, raw data length of frame */
-	long bytes_read;	/* amount of scanlength that has been read from *data */
-
-	wait_queue_head_t wq;	/* Processes waiting */
-};
-
-#define	IBMCAM_MODEL_1	1	/* XVP-501, 3 interfaces, rev. 0.02 */
-#define IBMCAM_MODEL_2	2	/* KSX-X9903, 2 interfaces, rev. 3.0a */
-
-struct usb_ibmcam {
-	struct video_device vdev;
-
-	/* Device structure */
-	struct usb_device *dev;
-
-	unsigned char iface;                            /* Video interface number */
-	unsigned char ifaceAltActive, ifaceAltInactive; /* Alt settings */
-
-	struct semaphore lock;
-	int user;		/* user count for exclusive use */
-
-	int ibmcam_used;        /* Is this structure in use? */
-	int initialized;	/* Had we already sent init sequence? */
-	int camera_model;	/* What type of IBM camera we got? */
-	int streaming;		/* Are we streaming Isochronous? */
-	int grabbing;		/* Are we grabbing? */
-	int last_error;		/* What calamity struck us? */
-
-	int compress;		/* Should the next frame be compressed? */
-
-	char *fbuf;		/* Videodev buffer area */
-	int fbuf_size;		/* Videodev buffer size */
-
-	int curframe;
-	struct ibmcam_frame frame[IBMCAM_NUMFRAMES];	/* Double buffering */
-
-	int cursbuf;		/* Current receiving sbuf */
-	struct ibmcam_sbuf sbuf[IBMCAM_NUMSBUF];	/* Double buffering */
-	volatile int remove_pending;	/* If set then about to exit */
-
-        /*
-	 * Scratch space from the Isochronous pipe.
-	 * Scratch buffer should contain at least one pair of lines
-	 * (CAMERA_IMAGE_LINE_SZ). We set it to two pairs here.
-	 * This will be approximately 2 KB. HOWEVER in reality this
-	 * buffer must be as large as hundred of KB because otherwise
-	 * you'll get lots of overflows because V4L client may request
-	 * frames not as uniformly as USB sources them.
-	 */
-	unsigned char *scratch;
-	int scratchlen;
-
-	struct video_picture vpic, vpic_old;	/* Picture settings */
-	struct video_capability vcap;		/* Video capabilities */
-	struct video_channel vchan;	/* May be used for tuner support */
-	unsigned char video_endp;	/* 0x82 for IBM camera */
-        int has_hdr;
-        int frame_num;
-	int iso_packet_len;		/* Videomode-dependent, saves bus bandwidth */
-
-	/* Statistics that can be overlayed on screen */
-        unsigned long urb_count;        /* How many URBs we received so far */
-        unsigned long urb_length;       /* Length of last URB */
-        unsigned long data_count;       /* How many bytes we received */
-        unsigned long header_count;     /* How many frame headers we found */
-	unsigned long scratch_ovf_count;/* How many times we overflowed scratch */
-	unsigned long iso_skip_count;	/* How many empty ISO packets received */
-	unsigned long iso_err_count;	/* How many bad ISO packets received */
-};
-
-#endif /* __LINUX_IBMCAM_H */