patch-2.4.19 linux-2.4.19/drivers/usb/Config.in

Next file: linux-2.4.19/drivers/usb/Makefile
Previous file: linux-2.4.19/drivers/usb/CDCEther.h
Back to the patch index
Back to the overall index
Lines: 174
Date: Fri Aug 2 17:39:44 2002
Orig file: linux-2.4.18/drivers/usb/Config.in
Orig date: Mon Feb 25 11:38:07 2002

diff -urN linux-2.4.18/drivers/usb/Config.in linux-2.4.19/drivers/usb/Config.in
@@ -8,7 +8,7 @@
 if [ "$CONFIG_USB" = "y" -o  "$CONFIG_USB" = "m" ]; then
    bool '  USB verbose debug messages' CONFIG_USB_DEBUG
 
-comment 'Miscellaneous USB options'
+   comment 'Miscellaneous USB options'
    bool '  Preliminary USB device filesystem' CONFIG_USB_DEVICEFS
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
       bool '  Enforce USB bandwidth allocation (EXPERIMENTAL)' CONFIG_USB_BANDWIDTH
@@ -16,87 +16,91 @@
       define_bool CONFIG_USB_BANDWIDTH n
    fi
    bool '  Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT
-fi
 
-comment 'USB Controllers'
-if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
-   dep_tristate '  UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
-fi
-if [ "$CONFIG_USB_UHCI" != "y" ]; then
-   dep_tristate '  UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
-else
-   define_bool CONFIG_USB_UHCI_ALT n
-fi
-dep_tristate '  OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
+   comment 'USB Host Controller Drivers'
+   source drivers/usb/hcd/Config.in
+   if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
+      dep_tristate '  UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
+   fi
+   if [ "$CONFIG_USB_UHCI" != "y" ]; then
+      dep_tristate '  UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
+   else
+      define_bool CONFIG_USB_UHCI_ALT n
+   fi
+   dep_tristate '  OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
 
-comment 'USB Device Class drivers'
-dep_tristate '  USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
-dep_tristate '  USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_SCSI" = "n" ]; then
-   comment '  SCSI support is needed for USB Storage'
-fi
-dep_tristate '  USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
-   dep_mbool '    USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
-   dep_mbool '    Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
-   dep_mbool '    Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM  $CONFIG_USB_STORAGE
-   dep_mbool '    ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
-   dep_mbool '    Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
-   dep_mbool '    HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
-   dep_mbool '    SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
-   dep_mbool '    Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
-dep_tristate '  USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
-dep_tristate '  USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
-
-comment 'USB Human Interface Devices (HID)'
-if [ "$CONFIG_INPUT" = "n" ]; then
-   comment '  Input core support is needed for USB HID'
-else
-   dep_tristate '  USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB $CONFIG_INPUT
-      dep_mbool '    /dev/hiddev raw HID device support (EXPERIMENTAL)' CONFIG_USB_HIDDEV $CONFIG_USB_HID
+   comment 'USB Device Class drivers'
+   dep_tristate '  USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
+   dep_tristate '    EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
+   dep_tristate '  USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
+   if [ "$CONFIG_SCSI" = "n" ]; then
+      comment '  SCSI support is needed for USB Storage'
+   fi
+   dep_tristate '  USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
+      dep_mbool '    USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
+      dep_mbool '    Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+      dep_mbool '    Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM  $CONFIG_USB_STORAGE
+      dep_mbool '    ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
+      dep_mbool '    Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
+      dep_mbool '    HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+      dep_mbool '    SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+      dep_mbool '    Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
+   dep_tristate '  USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
+   dep_tristate '  USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
+
+   comment 'USB Human Interface Devices (HID)'
+   dep_tristate '  USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
+   if [ "$CONFIG_INPUT" = "n" ]; then
+      comment '    Input core support is needed for USB HID input layer or HIDBP support'
+   fi
+      dep_mbool '    HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
+      dep_mbool '    /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
    if [ "$CONFIG_USB_HID" != "y" ]; then
       dep_tristate '  USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
       dep_tristate '  USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
    fi
    dep_tristate '  Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
-fi
 
-comment 'USB Imaging devices'
-dep_tristate '  USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
-dep_tristate '  USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
-dep_tristate '  USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
-dep_tristate '  Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
-dep_tristate '  HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
-
-comment 'USB Multimedia devices'
-if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
-   comment '  Video4Linux support is needed for USB Multimedia device support'
-else
-   dep_tristate '  USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
-   dep_tristate '  USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
-   dep_tristate '  USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
-   dep_tristate '  USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
-   dep_tristate '  USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
-   dep_tristate '  USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
-   dep_tristate '  D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
-   dep_tristate '  DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
-fi
-
-comment 'USB Network adaptors'
-if [ "$CONFIG_NET" = "n" ]; then
-   comment '  Networking support is needed for USB Networking device support'
-else
-   dep_tristate '  USB ADMtek Pegasus-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-fi
-
-comment 'USB port drivers'
-dep_tristate '  USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
-source drivers/usb/serial/Config.in
+   comment 'USB Imaging devices'
+   dep_tristate '  USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
+   dep_tristate '  USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
+   dep_tristate '  USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
+   dep_tristate '  Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
+   dep_tristate '  HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
+
+   comment 'USB Multimedia devices'
+   if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
+      comment '  Video4Linux support is needed for USB Multimedia device support'
+   else
+      dep_tristate '  USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
+      dep_tristate '  USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
+      dep_tristate '  USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
+      dep_tristate '  USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
+      dep_tristate '  USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
+      dep_tristate '  USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
+      dep_tristate '  D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
+      dep_tristate '  DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
+   fi
 
-comment 'USB Miscellaneous drivers'
-dep_tristate '  USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
+   comment 'USB Network adaptors'
+   if [ "$CONFIG_NET" = "n" ]; then
+      comment '  Networking support is needed for USB Networking device support'
+   else
+      dep_tristate '  USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+      dep_tristate '  USB Realtek RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+      dep_tristate '  USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+      dep_tristate '  USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+      dep_tristate '  USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+      dep_tristate '  USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+   fi
 
+   comment 'USB port drivers'
+   dep_tristate '  USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
+   source drivers/usb/serial/Config.in
+
+   comment 'USB Miscellaneous drivers'
+   dep_tristate '  USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
+   dep_tristate '  USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
+   dep_tristate '  Tieman Voyager USB Braille display support (EXPERIMENTAL)' CONFIG_USB_BRLVGER $CONFIG_USB $CONFIG_EXPERIMENTAL
+fi
 endmenu
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)