patch-2.4.19 linux-2.4.19/drivers/net/tokenring/3c359.h

• Lines: 295
• Date: Fri Aug 2 17:39:44 2002
• Orig file: linux-2.4.18/drivers/net/tokenring/3c359.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.18/drivers/net/tokenring/3c359.h linux-2.4.19/drivers/net/tokenring/3c359.h
@@ -0,0 +1,294 @@
+/*
+ *  3c359.h (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved
+ *
+ *  Linux driver for 3Com 3C359 Token Link PCI XL cards.
+ *
+ *  This software may be used and distributed according to the terms
+ *  of the GNU General Public License Version 2 or (at your option) 
+ *  any later verion, incorporated herein by reference.
+ */
+
+#ifndef PCI_DEVICE_ID_3COM_3C359
+#define PCI_DEVICE_ID_3COM_3C359 0x3590
+#endif
+
+/* Memory Access Commands */
+#define IO_BYTE_READ 0x28 << 24
+#define IO_BYTE_WRITE 0x18 << 24 
+#define IO_WORD_READ 0x20 << 24
+#define IO_WORD_WRITE 0x10 << 24
+#define MMIO_BYTE_READ 0x88 << 24
+#define MMIO_BYTE_WRITE 0x48 << 24
+#define MMIO_WORD_READ 0x80 << 24
+#define MMIO_WORD_WRITE 0x40 << 24
+#define MEM_BYTE_READ 0x8C << 24
+#define MEM_BYTE_WRITE 0x4C << 24
+#define MEM_WORD_READ 0x84 << 24
+#define MEM_WORD_WRITE 0x44 << 24
+
+#define PMBAR 0x1C80
+#define PMB_CPHOLD (1<<10)
+
+#define CPATTENTION 0x180D
+#define CPA_PMBARVIS (1<<7)
+#define CPA_MEMWREN (1<<6)
+
+#define SWITCHSETTINGS 0x1C88
+#define EECONTROL 0x1C8A
+#define EEDATA 0x1C8C
+#define EEREAD 0x0080 
+#define EEWRITE 0x0040
+#define EEERASE 0x0060
+#define EE_ENABLE_WRITE 0x0030
+#define EEBUSY (1<<15)
+
+#define WRBR 0xCDE02
+#define WWOR 0xCDE04
+#define WWCR 0xCDE06
+#define MACSTATUS 0xCDE08 
+#define MISR_RW 0xCDE0B
+#define MISR_AND 0xCDE2B
+#define MISR_SET 0xCDE4B
+#define RXBUFAREA 0xCDE10
+#define RXEARLYTHRESH 0xCDE12
+#define TXSTARTTHRESH 0x58
+#define DNPRIREQTHRESH 0x2C
+
+#define MISR_CSRB (1<<5)
+#define MISR_RASB (1<<4)
+#define MISR_SRBFR (1<<3)
+#define MISR_ASBFR (1<<2)
+#define MISR_ARBF (1<<1) 
+
+/* MISR Flags memory locations */
+#define MF_SSBF 0xDFFE0 
+#define MF_ARBF 0xDFFE1
+#define MF_ASBFR 0xDFFE2
+#define MF_SRBFR 0xDFFE3
+#define MF_RASB 0xDFFE4
+#define MF_CSRB 0xDFFE5
+
+#define MMIO_MACDATA 0x10 
+#define MMIO_MAC_ACCESS_CMD 0x14
+#define MMIO_TIMER 0x1A
+#define MMIO_DMA_CTRL 0x20
+#define MMIO_DNLISTPTR 0x24
+#define MMIO_HASHFILTER 0x28
+#define MMIO_CONFIG 0x29
+#define MMIO_DNPRIREQTHRESH 0x2C
+#define MMIO_DNPOLL 0x2D
+#define MMIO_UPPKTSTATUS 0x30
+#define MMIO_FREETIMER 0x34
+#define MMIO_COUNTDOWN 0x36
+#define MMIO_UPLISTPTR 0x38
+#define MMIO_UPPOLL 0x3C
+#define MMIO_UPBURSTTHRESH 0x40
+#define MMIO_DNBURSTTHRESH 0x41
+#define MMIO_INTSTATUS_AUTO 0x56
+#define MMIO_TXSTARTTHRESH 0x58
+#define MMIO_INTERRUPTENABLE 0x5A
+#define MMIO_INDICATIONENABLE 0x5C
+#define MMIO_COMMAND 0x5E  /* These two are meant to be the same */
+#define MMIO_INTSTATUS 0x5E /* Makes the code more readable this way */
+#define INTSTAT_CMD_IN_PROGRESS (1<<12) 
+#define INTSTAT_SRB (1<<14)
+#define INTSTAT_INTLATCH (1<<0)
+
+/* Indication / Interrupt Mask 
+ * Annoyingly the bits to be set in the indication and interrupt enable
+ * do not match with the actual bits received in the interrupt, although
+ * they are in the same order. 
+ * The mapping for the indication / interrupt are:
+ * Bit	Indication / Interrupt
+ *   0	HostError
+ *   1	txcomplete
+ *   2	updneeded
+ *   3	rxcomplete
+ *   4	intrequested
+ *   5	macerror
+ *   6  dncomplete
+ *   7	upcomplete
+ *   8	txunderrun
+ *   9	asbf
+ *  10	srbr
+ *  11	arbc
+ *
+ *  The only ones we don't want to receive are txcomplete and rxcomplete
+ *  we use dncomplete and upcomplete instead.
+ */
+
+#define INT_MASK 0xFF5
+
+/* Note the subtle difference here, IND and INT */
+
+#define SETINDENABLE (8<<12)
+#define SETINTENABLE (7<<12)
+#define SRBBIT (1<<10)
+#define ASBBIT (1<<9)
+#define ARBBIT (1<<11)
+
+#define SRB 0xDFE90
+#define ASB 0xDFED0
+#define ARB 0xD0000
+#define SCRATCH 0xDFEF0
+
+#define INT_REQUEST 0x6000 /* (6 << 12) */
+#define ACK_INTERRUPT 0x6800 /* (13 <<11) */
+#define GLOBAL_RESET 0x00 
+#define DNDISABLE 0x5000 
+#define DNENABLE 0x4800 
+#define DNSTALL 0x3002
+#define DNRESET 0x5800
+#define DNUNSTALL 0x3003
+#define UPRESET 0x2800
+#define UPSTALL 0x3000
+#define UPUNSTALL 0x3001
+#define SETCONFIG 0x4000
+#define SETTXSTARTTHRESH 0x9800 
+
+/* Received Interrupts */
+#define ASBFINT (1<<13)
+#define SRBRINT (1<<14)
+#define ARBCINT (1<<15)
+#define TXUNDERRUN (1<<11)
+
+#define UPCOMPINT (1<<10)
+#define DNCOMPINT (1<<9)
+#define HARDERRINT (1<<7)
+#define RXCOMPLETE (1<<4)
+#define TXCOMPINT (1<<2)
+#define HOSTERRINT (1<<1)
+
+/* Receive descriptor bits */
+#define RXOVERRUN (1<<19)
+#define RXFC (1<<21)
+#define RXAR (1<<22)
+#define RXUPDCOMPLETE (1<<23)
+#define RXUPDFULL (1<<24)
+#define RXUPLASTFRAG (1<<31)
+
+/* Transmit descriptor bits */
+#define TXDNCOMPLETE (1<<16)
+#define TXTXINDICATE (1<<27)
+#define TXDPDEMPTY (1<<29)
+#define TXDNINDICATE (1<<31)
+#define TXDNFRAGLAST (1<<31)
+
+/* Interrupts to Acknowledge */
+#define LATCH_ACK 1 
+#define TXCOMPACK (1<<1)
+#define INTREQACK (1<<2)
+#define DNCOMPACK (1<<3)
+#define UPCOMPACK (1<<4)
+#define ASBFACK (1<<5)
+#define SRBRACK (1<<6)
+#define ARBCACK (1<<7)
+
+#define XL_IO_SPACE 128
+#define SRB_COMMAND_SIZE 50
+
+/* Adapter Commands */
+#define REQUEST_INT 0x00
+#define MODIFY_OPEN_PARMS 0x01
+#define RESTORE_OPEN_PARMS 0x02
+#define OPEN_NIC 0x03
+#define CLOSE_NIC 0x04
+#define SET_SLEEP_MODE 0x05
+#define SET_GROUP_ADDRESS 0x06
+#define SET_FUNC_ADDRESS 0x07
+#define READ_LOG 0x08
+#define SET_MULTICAST_MODE 0x0C
+#define CHANGE_WAKEUP_PATTERN 0x0D
+#define GET_STATISTICS 0x13
+#define SET_RECEIVE_MODE 0x1F
+
+/* ARB Commands */
+#define RECEIVE_DATA 0x81
+#define RING_STATUS_CHANGE 0x84
+
+/* ASB Commands */
+#define ASB_RECEIVE_DATE 0x81 
+
+/* Defines for LAN STATUS CHANGE reports */
+#define LSC_SIG_LOSS 0x8000
+#define LSC_HARD_ERR 0x4000
+#define LSC_SOFT_ERR 0x2000
+#define LSC_TRAN_BCN 0x1000
+#define LSC_LWF      0x0800
+#define LSC_ARW      0x0400
+#define LSC_FPE      0x0200
+#define LSC_RR       0x0100
+#define LSC_CO       0x0080
+#define LSC_SS       0x0040
+#define LSC_RING_REC 0x0020
+#define LSC_SR_CO    0x0010
+#define LSC_FDX_MODE 0x0004
+
+#define XL_MAX_ADAPTERS 8 /* 0x08 __MODULE_STRING can't hand 0xnn */
+
+/* 3c359 defaults for buffers */
+ 
+#define XL_RX_RING_SIZE 16 /* must be a power of 2 */
+#define XL_TX_RING_SIZE 16 /* must be a power of 2 */
+
+#define PKT_BUF_SZ 4096 /* Default packet size */
+
+/* 3c359 data structures */
+
+struct xl_tx_desc {
+	u32 dnnextptr ; 
+	u32 framestartheader ; 
+	u32 buffer ;
+	u32 buffer_length ;
+};
+
+struct xl_rx_desc {
+	u32 upnextptr ; 
+	u32 framestatus ; 
+	u32 upfragaddr ; 
+	u32 upfraglen ; 
+};
+
+struct xl_private {
+	
+
+	/* These two structures must be aligned on 8 byte boundaries */
+
+	/* struct xl_rx_desc xl_rx_ring[XL_RX_RING_SIZE]; */
+	/* struct xl_tx_desc xl_tx_ring[XL_TX_RING_SIZE]; */
+	struct xl_rx_desc *xl_rx_ring ; 
+	struct xl_tx_desc *xl_tx_ring ; 
+	struct sk_buff *tx_ring_skb[XL_TX_RING_SIZE], *rx_ring_skb[XL_RX_RING_SIZE];	
+	int tx_ring_head, tx_ring_tail ;  
+	int rx_ring_tail, rx_ring_no ; 
+	int free_ring_entries ; 
+
+	u16 srb;
+	u16 arb;
+	u16 asb;
+
+	u8 *xl_mmio;
+	char *xl_card_name;
+	struct pci_dev *pdev ; 
+	
+	spinlock_t xl_lock ; 
+
+	volatile int srb_queued;    
+	struct wait_queue *srb_wait;
+	volatile int asb_queued;   
+
+	struct net_device_stats xl_stats ;
+
+	u16 mac_buffer ; 	
+	u16 xl_lan_status ;
+	u8 xl_ring_speed ;
+	u16 pkt_buf_sz ; 
+	u8 xl_message_level; 
+	u16 xl_copy_all_options ;  
+	unsigned char xl_functional_addr[4] ; 
+	u16 xl_addr_table_addr, xl_parms_addr ; 
+	u8 xl_laa[6] ; 
+	u32 rx_ring_dma_addr ; 
+	u32 tx_ring_dma_addr ; 
+};
+