patch-2.4.19 linux-2.4.19/drivers/ide/Config.in
Next file: linux-2.4.19/drivers/ide/Makefile
Previous file: linux-2.4.19/drivers/i2c/i2c-keywest.c
Back to the patch index
Back to the overall index
- Lines: 111
- Date:
Fri Aug 2 17:39:44 2002
- Orig file:
linux-2.4.18/drivers/ide/Config.in
- Orig date:
Mon Oct 8 11:40:13 2001
diff -urN linux-2.4.18/drivers/ide/Config.in linux-2.4.19/drivers/ide/Config.in
@@ -14,6 +14,7 @@
dep_tristate ' Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
dep_mbool ' Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK
+ dep_mbool ' Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK
define_bool CONFIG_BLK_DEV_IDEDISK_VENDOR n
dep_mbool ' Fujitsu Vendor Specific' CONFIG_BLK_DEV_IDEDISK_FUJITSU $CONFIG_BLK_DEV_IDEDISK_VENDOR
@@ -32,6 +33,9 @@
dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
+ bool ' IDE Taskfile Access' CONFIG_IDE_TASK_IOCTL
+# bool ' IDE Taskfile IO' CONFIG_IDE_TASKFILE_IO
+
comment 'IDE chipset support/bugfixes'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
@@ -43,14 +47,17 @@
if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
bool ' Sharing PCI IDE interrupts support' CONFIG_IDEPCI_SHARE_IRQ
bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI
-# bool ' Asynchronous DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI
- define_bool CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI
bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
+ dep_bool ' Force enable legacy 2.0.X HOSTS to use DMA' CONFIG_BLK_DEV_IDEDMA_FORCED $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
-# dep_bool ' Attempt to HACK around Chipsets that TIMEOUT (WIP)' CONFIG_BLK_DEV_IDEDMA_TIMEOUT $CONFIG_IDEDMA_PCI_WIP
+ dep_bool ' Attempt to HACK around Chipsets that TIMEOUT (WIP)' CONFIG_BLK_DEV_IDEDMA_TIMEOUT $CONFIG_IDEDMA_PCI_WIP
dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
+# dep_bool ' Asynchronous DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP $CONFIG_EXPERIMENTAL
+ define_bool CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI
+# dep_bool ' Tag Command Queue DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDMA_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP $CONFIG_EXPERIMENTAL
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
@@ -59,11 +66,12 @@
dep_bool ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
dep_bool ' CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' CMD680 chipset tuning support' CONFIG_BLK_DEV_CMD680 $CONFIG_BLK_DEV_CMD64X
dep_bool ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
- dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' HPT366/368/370 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
@@ -72,23 +80,21 @@
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
fi
- dep_bool ' NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
- dep_bool ' PROMISE PDC202{46|62|65|67|68} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
+# dep_mbool ' Pacific Digital A-DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC_ADMA $CONFIG_BLK_DEV_ADMA $CONFIG_IDEDMA_PCI_WIP $CONFIG_EXPERIMENTAL
+ dep_bool ' PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
- dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
+ if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
+ bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
+ fi
fi
-
-# dep_mbool ' Pacific Digital A-DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC_ADMA $CONFIG_BLK_DEV_ADMA $CONFIG_IDEDMA_PCI_WIP
-
- if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
- bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
- fi
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool ' Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC
@@ -101,6 +107,9 @@
define_bool CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDEDMA_PMAC
fi
fi
+ if [ "$CONFIG_SIBYTE_SWARM" = "y" ]; then
+ bool ' SWARM onboard IDE support' CONFIG_BLK_DEV_IDE_SWARM
+ fi
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
dep_bool ' ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN
dep_bool ' ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE
@@ -113,7 +122,7 @@
dep_mbool ' Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_mbool ' Buddha/Catweasel IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL
+ dep_mbool ' Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ATARI" = "y" ]; then
dep_bool ' Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE $CONFIG_ATARI
@@ -173,6 +182,7 @@
else
define_bool CONFIG_DMA_NONPCI n
fi
+
if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
"$CONFIG_BLK_DEV_AEC62XX" = "y" -o \
"$CONFIG_BLK_DEV_ALI15X3" = "y" -o \
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)