patch-2.4.19 linux-2.4.19/drivers/hotplug/ibmphp_res.c
Next file: linux-2.4.19/drivers/hotplug/pci_hotplug_core.c
Previous file: linux-2.4.19/drivers/hotplug/ibmphp_pci.c
Back to the patch index
Back to the overall index
- Lines: 2068
- Date:
Fri Aug 2 17:39:44 2002
- Orig file:
linux-2.4.18/drivers/hotplug/ibmphp_res.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.18/drivers/hotplug/ibmphp_res.c linux-2.4.19/drivers/hotplug/ibmphp_res.c
@@ -0,0 +1,2067 @@
+/*
+ * IBM Hot Plug Controller Driver
+ *
+ * Written By: Irene Zubarev, IBM Corporation
+ *
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (c) 2001,2002 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include "ibmphp.h"
+
+static int flags = 0; /* for testing */
+
+static void update_resources (struct bus_node *bus_cur, int type, int rangeno);
+static int once_over (void);
+static int remove_ranges (struct bus_node *, struct bus_node *);
+static int update_bridge_ranges (struct bus_node **);
+static int add_range (int type, struct range_node *, struct bus_node *);
+static void fix_resources (struct bus_node *);
+static inline struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
+
+static LIST_HEAD(gbuses);
+
+static struct bus_node * alloc_error_bus (struct ebda_pci_rsrc * curr)
+{
+ struct bus_node * newbus;
+
+ newbus = kmalloc (sizeof (struct bus_node), GFP_KERNEL);
+ if (!newbus) {
+ err ("out of system memory \n");
+ return NULL;
+ }
+
+ memset (newbus, 0, sizeof (struct bus_node));
+ newbus->busno = curr->bus_num;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ return newbus;
+}
+
+static struct resource_node * alloc_resources (struct ebda_pci_rsrc * curr)
+{
+ struct resource_node *rs = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!rs) {
+ err ("out of system memory \n");
+ return NULL;
+ }
+ memset (rs, 0, sizeof (struct resource_node));
+ rs->busno = curr->bus_num;
+ rs->devfunc = curr->dev_fun;
+ rs->start = curr->start_addr;
+ rs->end = curr->end_addr;
+ rs->len = curr->end_addr - curr->start_addr + 1;
+ return rs;
+}
+
+static int alloc_bus_range (struct bus_node **new_bus, struct range_node **new_range, struct ebda_pci_rsrc *curr, int flag, u8 first_bus)
+{
+ struct bus_node * newbus;
+ struct range_node *newrange;
+ u8 num_ranges = 0;
+
+ if (first_bus) {
+ newbus = kmalloc (sizeof (struct bus_node), GFP_KERNEL);
+ if (!newbus) {
+ err ("out of system memory. \n");
+ return -ENOMEM;
+ }
+ memset (newbus, 0, sizeof (struct bus_node));
+ newbus->busno = curr->bus_num;
+ } else {
+ newbus = *new_bus;
+ switch (flag) {
+ case MEM:
+ num_ranges = newbus->noMemRanges;
+ break;
+ case PFMEM:
+ num_ranges = newbus->noPFMemRanges;
+ break;
+ case IO:
+ num_ranges = newbus->noIORanges;
+ break;
+ }
+ }
+
+ newrange = kmalloc (sizeof (struct range_node), GFP_KERNEL);
+ if (!newrange) {
+ if (first_bus)
+ kfree (newbus);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (newrange, 0, sizeof (struct range_node));
+ newrange->start = curr->start_addr;
+ newrange->end = curr->end_addr;
+
+ if (first_bus || (!num_ranges))
+ newrange->rangeno = 1;
+ else {
+ /* need to insert our range */
+ add_range (flag, newrange, newbus);
+ debug ("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end);
+ }
+
+ switch (flag) {
+ case MEM:
+ newbus->rangeMem = newrange;
+ if (first_bus)
+ newbus->noMemRanges = 1;
+ else {
+ debug ("First Memory Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ ++newbus->noMemRanges;
+ fix_resources (newbus);
+ }
+ break;
+ case IO:
+ newbus->rangeIO = newrange;
+ if (first_bus)
+ newbus->noIORanges = 1;
+ else {
+ debug ("First IO Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ ++newbus->noIORanges;
+ fix_resources (newbus);
+ }
+ break;
+ case PFMEM:
+ newbus->rangePFMem = newrange;
+ if (first_bus)
+ newbus->noPFMemRanges = 1;
+ else {
+ debug ("1st PFMemory Primary on Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ ++newbus->noPFMemRanges;
+ fix_resources (newbus);
+ }
+
+ break;
+ }
+
+ *new_bus = newbus;
+ *new_range = newrange;
+ return 0;
+}
+
+
+/* Notes:
+ * 1. The ranges are ordered. The buses are not ordered. (First come)
+ *
+ * 2. If cannot allocate out of PFMem range, allocate from Mem ranges. PFmemFromMem
+ * are not sorted. (no need since use mem node). To not change the entire code, we
+ * also add mem node whenever this case happens so as not to change
+ * ibmphp_check_mem_resource etc (and since it really is taking Mem resource)
+ */
+
+/*****************************************************************************
+ * This is the Resource Management initialization function. It will go through
+ * the Resource list taken from EBDA and fill in this module's data structures
+ *
+ * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
+ * SINCE WE'RE GOING TO ASSUME FOR NOW WE DON'T HAVE THOSE ON OUR BUSES FOR NOW
+ *
+ * Input: ptr to the head of the resource list from EBDA
+ * Output: 0, -1 or error codes
+ ***************************************************************************/
+int ibmphp_rsrc_init (void)
+{
+ struct ebda_pci_rsrc *curr;
+ struct range_node *newrange = NULL;
+ struct bus_node *newbus = NULL;
+ struct bus_node *bus_cur;
+ struct bus_node *bus_prev;
+ struct list_head *tmp;
+ struct resource_node *new_io = NULL;
+ struct resource_node *new_mem = NULL;
+ struct resource_node *new_pfmem = NULL;
+ int rc;
+ struct list_head *tmp_ebda;
+
+ list_for_each (tmp_ebda, &ibmphp_ebda_pci_rsrc_head) {
+ curr = list_entry (tmp_ebda, struct ebda_pci_rsrc, ebda_pci_rsrc_list);
+ if (!(curr->rsrc_type & PCIDEVMASK)) {
+ /* EBDA still lists non PCI devices, so ignore... */
+ debug ("this is not a PCI DEVICE in rsrc_init, please take care\n");
+ // continue;
+ }
+
+ /* this is a primary bus resource */
+ if (curr->rsrc_type & PRIMARYBUSMASK) {
+ /* memory */
+ if ((curr->rsrc_type & RESTYPE) == MMASK) {
+ /* no bus structure exists in place yet */
+ if (list_empty (&gbuses)) {
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, MEM, 1)))
+ return rc;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("gbuses = NULL, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ } else {
+ bus_cur = find_bus_wprev (curr->bus_num, &bus_prev, 1);
+ /* found our bus */
+ if (bus_cur) {
+ rc = alloc_bus_range (&bus_cur, &newrange, curr, MEM, 0);
+ if (rc)
+ return rc;
+ } else {
+ /* went through all the buses and didn't find ours, need to create a new bus node */
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, MEM, 1)))
+ return rc;
+
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("New Bus, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ }
+ }
+ } else if ((curr->rsrc_type & RESTYPE) == PFMASK) {
+ /* prefetchable memory */
+ if (list_empty (&gbuses)) {
+ /* no bus structure exists in place yet */
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, PFMEM, 1)))
+ return rc;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("gbuses = NULL, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ } else {
+ bus_cur = find_bus_wprev (curr->bus_num, &bus_prev, 1);
+ if (bus_cur) {
+ /* found our bus */
+ rc = alloc_bus_range (&bus_cur, &newrange, curr, PFMEM, 0);
+ if (rc)
+ return rc;
+ } else {
+ /* went through all the buses and didn't find ours, need to create a new bus node */
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, PFMEM, 1)))
+ return rc;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("1st Bus, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ }
+ }
+ } else if ((curr->rsrc_type & RESTYPE) == IOMASK) {
+ /* IO */
+ if (list_empty (&gbuses)) {
+ /* no bus structure exists in place yet */
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, IO, 1)))
+ return rc;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("gbuses = NULL, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ } else {
+ bus_cur = find_bus_wprev (curr->bus_num, &bus_prev, 1);
+ if (bus_cur) {
+ rc = alloc_bus_range (&bus_cur, &newrange, curr, IO, 0);
+ if (rc)
+ return rc;
+ } else {
+ /* went through all the buses and didn't find ours, need to create a new bus node */
+ if ((rc = alloc_bus_range (&newbus, &newrange, curr, IO, 1)))
+ return rc;
+ list_add_tail (&newbus->bus_list, &gbuses);
+ debug ("1st Bus, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
+ }
+ }
+
+ } else {
+ ; /* type is reserved WHAT TO DO IN THIS CASE???
+ NOTHING TO DO??? */
+ }
+ } else {
+ /* regular pci device resource */
+ if ((curr->rsrc_type & RESTYPE) == MMASK) {
+ /* Memory resource */
+ new_mem = alloc_resources (curr);
+ if (!new_mem)
+ return -ENOMEM;
+ new_mem->type = MEM;
+ /*
+ * if it didn't find the bus, means PCI dev
+ * came b4 the Primary Bus info, so need to
+ * create a bus rangeno becomes a problem...
+ * assign a -1 and then update once the range
+ * actually appears...
+ */
+ if (ibmphp_add_resource (new_mem) < 0) {
+ newbus = alloc_error_bus (curr);
+ if (!newbus)
+ return -ENOMEM;
+ newbus->firstMem = new_mem;
+ ++newbus->needMemUpdate;
+ new_mem->rangeno = -1;
+ }
+ debug ("Memory resource for device %x, bus %x, [%x - %x]\n", new_mem->devfunc, new_mem->busno, new_mem->start, new_mem->end);
+
+ } else if ((curr->rsrc_type & RESTYPE) == PFMASK) {
+ /* PFMemory resource */
+ new_pfmem = alloc_resources (curr);
+ if (!new_pfmem)
+ return -ENOMEM;
+ new_pfmem->type = PFMEM;
+ new_pfmem->fromMem = FALSE;
+ if (ibmphp_add_resource (new_pfmem) < 0) {
+ newbus = alloc_error_bus (curr);
+ if (!newbus)
+ return -ENOMEM;
+ newbus->firstPFMem = new_pfmem;
+ ++newbus->needPFMemUpdate;
+ new_pfmem->rangeno = -1;
+ }
+
+ debug ("PFMemory resource for device %x, bus %x, [%x - %x]\n", new_pfmem->devfunc, new_pfmem->busno, new_pfmem->start, new_pfmem->end);
+ } else if ((curr->rsrc_type & RESTYPE) == IOMASK) {
+ /* IO resource */
+ new_io = alloc_resources (curr);
+ if (!new_io)
+ return -ENOMEM;
+ new_io->type = IO;
+
+ /*
+ * if it didn't find the bus, means PCI dev
+ * came b4 the Primary Bus info, so need to
+ * create a bus rangeno becomes a problem...
+ * Can assign a -1 and then update once the
+ * range actually appears...
+ */
+ if (ibmphp_add_resource (new_io) < 0) {
+ newbus = alloc_error_bus (curr);
+ if (!newbus)
+ return -ENOMEM;
+ newbus->firstIO = new_io;
+ ++newbus->needIOUpdate;
+ new_io->rangeno = -1;
+ }
+ debug ("IO resource for device %x, bus %x, [%x - %x]\n", new_io->devfunc, new_io->busno, new_io->start, new_io->end);
+ }
+ }
+ }
+
+ debug ("after the while loop in rsrc_init \n");
+
+ list_for_each (tmp, &gbuses) {
+ bus_cur = list_entry (tmp, struct bus_node, bus_list);
+ /* This is to get info about PPB resources, since EBDA doesn't put this info into the primary bus info */
+ rc = update_bridge_ranges (&bus_cur);
+ if (rc)
+ return rc;
+ }
+ debug ("b4 once_over in rsrc_init \n");
+ rc = once_over (); /* This is to align ranges (so no -1) */
+ if (rc)
+ return rc;
+ debug ("after once_over in rsrc_init \n");
+ return 0;
+}
+
+/********************************************************************************
+ * This function adds a range into a sorted list of ranges per bus for a particular
+ * range type, it then calls another routine to update the range numbers on the
+ * pci devices' resources for the appropriate resource
+ *
+ * Input: type of the resource, range to add, current bus
+ * Output: 0 or -1, bus and range ptrs
+ ********************************************************************************/
+static int add_range (int type, struct range_node *range, struct bus_node *bus_cur)
+{
+ struct range_node *range_cur = NULL;
+ struct range_node *range_prev;
+ int count = 0, i_init;
+ int noRanges = 0;
+
+ switch (type) {
+ case MEM:
+ range_cur = bus_cur->rangeMem;
+ noRanges = bus_cur->noMemRanges;
+ break;
+ case PFMEM:
+ range_cur = bus_cur->rangePFMem;
+ noRanges = bus_cur->noPFMemRanges;
+ break;
+ case IO:
+ range_cur = bus_cur->rangeIO;
+ noRanges = bus_cur->noIORanges;
+ break;
+ }
+
+ range_prev = NULL;
+ while (range_cur) {
+ if (range->start < range_cur->start)
+ break;
+ range_prev = range_cur;
+ range_cur = range_cur->next;
+ count = count + 1;
+ }
+ if (!count) {
+ /* our range will go at the beginning of the list */
+ switch (type) {
+ case MEM:
+ bus_cur->rangeMem = range;
+ break;
+ case PFMEM:
+ bus_cur->rangePFMem = range;
+ break;
+ case IO:
+ bus_cur->rangeIO = range;
+ break;
+ }
+ range->next = range_cur;
+ range->rangeno = 1;
+ i_init = 0;
+ } else if (!range_cur) {
+ /* our range will go at the end of the list */
+ range->next = NULL;
+ range_prev->next = range;
+ range->rangeno = range_prev->rangeno + 1;
+ return 0;
+ } else {
+ /* the range is in the middle */
+ range_prev->next = range;
+ range->next = range_cur;
+ range->rangeno = range_cur->rangeno;
+ i_init = range_prev->rangeno;
+ }
+
+ for (count = i_init; count < noRanges; ++count) {
+ ++range_cur->rangeno;
+ range_cur = range_cur->next;
+ }
+
+ update_resources (bus_cur, type, i_init + 1);
+ return 0;
+}
+
+/*******************************************************************************
+ * This routine goes through the list of resources of type 'type' and updates
+ * the range numbers that they correspond to. It was called from add_range fnc
+ *
+ * Input: bus, type of the resource, the rangeno starting from which to update
+ ******************************************************************************/
+static void update_resources (struct bus_node *bus_cur, int type, int rangeno)
+{
+ struct resource_node *res = NULL;
+ u8 eol = FALSE; /* end of list indicator */
+
+ switch (type) {
+ case MEM:
+ if (bus_cur->firstMem)
+ res = bus_cur->firstMem;
+ break;
+ case PFMEM:
+ if (bus_cur->firstPFMem)
+ res = bus_cur->firstPFMem;
+ break;
+ case IO:
+ if (bus_cur->firstIO)
+ res = bus_cur->firstIO;
+ break;
+ }
+
+ if (res) {
+ while (res) {
+ if (res->rangeno == rangeno)
+ break;
+ if (res->next)
+ res = res->next;
+ else if (res->nextRange)
+ res = res->nextRange;
+ else {
+ eol = TRUE;
+ break;
+ }
+ }
+
+ if (!eol) {
+ /* found the range */
+ while (res) {
+ ++res->rangeno;
+ res = res->next;
+ }
+ }
+ }
+}
+
+static void fix_me (struct resource_node *res, struct bus_node *bus_cur, struct range_node *range)
+{
+ char * str = "";
+ switch (res->type) {
+ case IO:
+ str = "io";
+ break;
+ case MEM:
+ str = "mem";
+ break;
+ case PFMEM:
+ str = "pfmem";
+ break;
+ }
+
+ while (res) {
+ if (res->rangeno == -1) {
+ while (range) {
+ if ((res->start >= range->start) && (res->end <= range->end)) {
+ res->rangeno = range->rangeno;
+ debug ("%s->rangeno in fix_resources is %d\n", str, res->rangeno);
+ switch (res->type) {
+ case IO:
+ --bus_cur->needIOUpdate;
+ break;
+ case MEM:
+ --bus_cur->needMemUpdate;
+ break;
+ case PFMEM:
+ --bus_cur->needPFMemUpdate;
+ break;
+ }
+ break;
+ }
+ range = range->next;
+ }
+ }
+ if (res->next)
+ res = res->next;
+ else
+ res = res->nextRange;
+ }
+
+}
+
+/*****************************************************************************
+ * This routine reassigns the range numbers to the resources that had a -1
+ * This case can happen only if upon initialization, resources taken by pci dev
+ * appear in EBDA before the resources allocated for that bus, since we don't
+ * know the range, we assign -1, and this routine is called after a new range
+ * is assigned to see the resources with unknown range belong to the added range
+ *
+ * Input: current bus
+ * Output: none, list of resources for that bus are fixed if can be
+ *******************************************************************************/
+static void fix_resources (struct bus_node *bus_cur)
+{
+ struct range_node *range;
+ struct resource_node *res;
+
+ debug ("%s - bus_cur->busno = %d\n", __FUNCTION__, bus_cur->busno);
+
+ if (bus_cur->needIOUpdate) {
+ res = bus_cur->firstIO;
+ range = bus_cur->rangeIO;
+ fix_me (res, bus_cur, range);
+ }
+ if (bus_cur->needMemUpdate) {
+ res = bus_cur->firstMem;
+ range = bus_cur->rangeMem;
+ fix_me (res, bus_cur, range);
+ }
+ if (bus_cur->needPFMemUpdate) {
+ res = bus_cur->firstPFMem;
+ range = bus_cur->rangePFMem;
+ fix_me (res, bus_cur, range);
+ }
+}
+
+/*******************************************************************************
+ * This routine adds a resource to the list of resources to the appropriate bus
+ * based on their resource type and sorted by their starting addresses. It assigns
+ * the ptrs to next and nextRange if needed.
+ *
+ * Input: 3 diff. resources (nulled out if not needed)
+ * Output: ptrs assigned (to the node)
+ * 0 or -1
+ *******************************************************************************/
+int ibmphp_add_resource (struct resource_node *res)
+{
+ struct resource_node *res_cur;
+ struct resource_node *res_prev;
+ struct bus_node *bus_cur;
+ struct range_node *range_cur = NULL;
+ struct resource_node *res_start = NULL;
+
+ debug ("%s - enter\n", __FUNCTION__);
+
+ bus_cur = find_bus_wprev (res->busno, NULL, 0);
+
+ if (!bus_cur) {
+ /* didn't find a bus, smth's wrong!!! */
+ err ("no bus in the system, either pci_dev's wrong or allocation failed\n");
+ return -ENODEV;
+ }
+
+ /* Normal case */
+ switch (res->type) {
+ case IO:
+ range_cur = bus_cur->rangeIO;
+ res_start = bus_cur->firstIO;
+ break;
+ case MEM:
+ range_cur = bus_cur->rangeMem;
+ res_start = bus_cur->firstMem;
+ break;
+ case PFMEM:
+ range_cur = bus_cur->rangePFMem;
+ res_start = bus_cur->firstPFMem;
+ break;
+ default:
+ err ("cannot read the type of the resource to add... problem \n");
+ return -EINVAL;
+ }
+ while (range_cur) {
+ if ((res->start >= range_cur->start) && (res->end <= range_cur->end)) {
+ res->rangeno = range_cur->rangeno;
+ break;
+ }
+ range_cur = range_cur->next;
+ }
+
+ /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ * this is again the case of rangeno = -1
+ * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ */
+
+ if (!range_cur) {
+ switch (res->type) {
+ case IO:
+ ++bus_cur->needIOUpdate;
+ break;
+ case MEM:
+ ++bus_cur->needMemUpdate;
+ break;
+ case PFMEM:
+ ++bus_cur->needPFMemUpdate;
+ break;
+ }
+ res->rangeno = -1;
+ }
+
+ debug ("The range is %d\n", res->rangeno);
+ if (!res_start) {
+ /* no first{IO,Mem,Pfmem} on the bus, 1st IO/Mem/Pfmem resource ever */
+ switch (res->type) {
+ case IO:
+ bus_cur->firstIO = res;
+ break;
+ case MEM:
+ bus_cur->firstMem = res;
+ break;
+ case PFMEM:
+ bus_cur->firstPFMem = res;
+ break;
+ }
+ res->next = NULL;
+ res->nextRange = NULL;
+ } else {
+ res_cur = res_start;
+ res_prev = NULL;
+
+ debug ("res_cur->rangeno is %d\n", res_cur->rangeno);
+
+ while (res_cur) {
+ if (res_cur->rangeno >= res->rangeno)
+ break;
+ res_prev = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ }
+
+ if (!res_cur) {
+ /* at the end of the resource list */
+ debug ("i should be here, [%x - %x]\n", res->start, res->end);
+ res_prev->nextRange = res;
+ res->next = NULL;
+ res->nextRange = NULL;
+ } else if (res_cur->rangeno == res->rangeno) {
+ /* in the same range */
+ while (res_cur) {
+ if (res->start < res_cur->start)
+ break;
+ res_prev = res_cur;
+ res_cur = res_cur->next;
+ }
+ if (!res_cur) {
+ /* the last resource in this range */
+ res_prev->next = res;
+ res->next = NULL;
+ res->nextRange = res_prev->nextRange;
+ res_prev->nextRange = NULL;
+ } else if (res->start < res_cur->start) {
+ /* at the beginning or middle of the range */
+ if (!res_prev) {
+ switch (res->type) {
+ case IO:
+ bus_cur->firstIO = res;
+ break;
+ case MEM:
+ bus_cur->firstMem = res;
+ break;
+ case PFMEM:
+ bus_cur->firstPFMem = res;
+ break;
+ }
+ } else if (res_prev->rangeno == res_cur->rangeno)
+ res_prev->next = res;
+ else
+ res_prev->nextRange = res;
+
+ res->next = res_cur;
+ res->nextRange = NULL;
+ }
+ } else {
+ /* this is the case where it is 1st occurence of the range */
+ if (!res_prev) {
+ /* at the beginning of the resource list */
+ res->next = NULL;
+ switch (res->type) {
+ case IO:
+ res->nextRange = bus_cur->firstIO;
+ bus_cur->firstIO = res;
+ break;
+ case MEM:
+ res->nextRange = bus_cur->firstMem;
+ bus_cur->firstMem = res;
+ break;
+ case PFMEM:
+ res->nextRange = bus_cur->firstPFMem;
+ bus_cur->firstPFMem = res;
+ break;
+ }
+ } else if (res_cur->rangeno > res->rangeno) {
+ /* in the middle of the resource list */
+ res_prev->nextRange = res;
+ res->next = NULL;
+ res->nextRange = res_cur;
+ }
+ }
+ }
+
+ debug ("%s - exit\n", __FUNCTION__);
+ return 0;
+}
+
+/****************************************************************************
+ * This routine will remove the resource from the list of resources
+ *
+ * Input: io, mem, and/or pfmem resource to be deleted
+ * Ouput: modified resource list
+ * 0 or error code
+ ****************************************************************************/
+int ibmphp_remove_resource (struct resource_node *res)
+{
+ struct bus_node *bus_cur;
+ struct resource_node *res_cur = NULL;
+ struct resource_node *res_prev;
+ struct resource_node *mem_cur;
+ char * type = "";
+
+ bus_cur = find_bus_wprev (res->busno, NULL, 0);
+
+ if (!bus_cur) {
+ err ("cannot find corresponding bus of the io resource to remove "
+ "bailing out...\n");
+ return -ENODEV;
+ }
+
+ switch (res->type) {
+ case IO:
+ res_cur = bus_cur->firstIO;
+ type = "io";
+ break;
+ case MEM:
+ res_cur = bus_cur->firstMem;
+ type = "mem";
+ break;
+ case PFMEM:
+ res_cur = bus_cur->firstPFMem;
+ type = "pfmem";
+ break;
+ default:
+ err ("unknown type for resource to remove \n");
+ return -EINVAL;
+ }
+ res_prev = NULL;
+
+ while (res_cur) {
+ /* ???????????DO WE _NEED_ TO BE CHECKING FOR END AS WELL?????????? */
+ if ((res_cur->start == res->start) && (res_cur->end == res->end))
+ break;
+ res_prev = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ }
+
+ if (!res_cur) {
+ if (res->type == PFMEM) {
+ /*
+ * case where pfmem might be in the PFMemFromMem list
+ * so will also need to remove the corresponding mem
+ * entry
+ */
+ res_cur = bus_cur->firstPFMemFromMem;
+ res_prev = NULL;
+
+ while (res_cur) {
+ if ((res_cur->start == res->start) && (res_cur->end == res->end)) {
+ mem_cur = bus_cur->firstMem;
+ while (mem_cur) {
+ if ((mem_cur->start == res_cur->start)
+ && (mem_cur->end == res_cur->end))
+ break;
+ if (mem_cur->next)
+ mem_cur = mem_cur->next;
+ else
+ mem_cur = mem_cur->nextRange;
+ }
+ if (!mem_cur) {
+ err ("cannot find corresponding mem node for pfmem...\n");
+ return -EINVAL;
+ }
+
+ ibmphp_remove_resource (mem_cur);
+ if (!res_prev)
+ bus_cur->firstPFMemFromMem = res_cur->next;
+ else
+ res_prev->next = res_cur->next;
+ kfree (res_cur);
+ return 0;
+ }
+ res_prev = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ }
+ if (!res_cur) {
+ err ("cannot find pfmem to delete...\n");
+ return -EINVAL;
+ }
+ } else {
+ err ("the %s resource is not in the list to be deleted...\n", type);
+ return -EINVAL;
+ }
+ }
+ if (!res_prev) {
+ /* first device to be deleted */
+ if (res_cur->next) {
+ switch (res->type) {
+ case IO:
+ bus_cur->firstIO = res_cur->next;
+ break;
+ case MEM:
+ bus_cur->firstMem = res_cur->next;
+ break;
+ case PFMEM:
+ bus_cur->firstPFMem = res_cur->next;
+ break;
+ }
+ } else if (res_cur->nextRange) {
+ switch (res->type) {
+ case IO:
+ bus_cur->firstIO = res_cur->nextRange;
+ break;
+ case MEM:
+ bus_cur->firstMem = res_cur->nextRange;
+ break;
+ case PFMEM:
+ bus_cur->firstPFMem = res_cur->nextRange;
+ break;
+ }
+ } else {
+ switch (res->type) {
+ case IO:
+ bus_cur->firstIO = NULL;
+ break;
+ case MEM:
+ bus_cur->firstMem = NULL;
+ break;
+ case PFMEM:
+ bus_cur->firstPFMem = NULL;
+ break;
+ }
+ }
+ kfree (res_cur);
+ return 0;
+ } else {
+ if (res_cur->next) {
+ if (res_prev->rangeno == res_cur->rangeno)
+ res_prev->next = res_cur->next;
+ else
+ res_prev->nextRange = res_cur->next;
+ } else if (res_cur->nextRange) {
+ res_prev->next = NULL;
+ res_prev->nextRange = res_cur->nextRange;
+ } else {
+ res_prev->next = NULL;
+ res_prev->nextRange = NULL;
+ }
+ kfree (res_cur);
+ return 0;
+ }
+
+ return 0;
+}
+
+static struct range_node * find_range (struct bus_node *bus_cur, struct resource_node * res)
+{
+ struct range_node * range = NULL;
+
+ switch (res->type) {
+ case IO:
+ range = bus_cur->rangeIO;
+ break;
+ case MEM:
+ range = bus_cur->rangeMem;
+ break;
+ case PFMEM:
+ range = bus_cur->rangePFMem;
+ break;
+ default:
+ err ("cannot read resource type in find_range \n");
+ }
+
+ while (range) {
+ if (res->rangeno == range->rangeno)
+ break;
+ range = range->next;
+ }
+ return range;
+}
+
+/*****************************************************************************
+ * This routine will check to make sure the io/mem/pfmem->len that the device asked for
+ * can fit w/i our list of available IO/MEM/PFMEM resources. If cannot, returns -EINVAL,
+ * otherwise, returns 0
+ *
+ * Input: resource
+ * Ouput: the correct start and end address are inputted into the resource node,
+ * 0 or -EINVAL
+ *****************************************************************************/
+int ibmphp_check_resource (struct resource_node *res, u8 bridge)
+{
+ struct bus_node *bus_cur;
+ struct range_node *range = NULL;
+ struct resource_node *res_prev;
+ struct resource_node *res_cur = NULL;
+ u32 len_cur = 0, start_cur = 0, len_tmp = 0;
+ int noranges = 0;
+ u32 tmp_start; /* this is to make sure start address is divisible by the length needed */
+ u32 tmp_divide;
+ u8 flag = FALSE;
+
+ if (!res)
+ return -EINVAL;
+
+ if (bridge) {
+ /* The rules for bridges are different, 4K divisible for IO, 1M for (pf)mem*/
+ if (res->type == IO)
+ tmp_divide = IOBRIDGE;
+ else
+ tmp_divide = MEMBRIDGE;
+ } else
+ tmp_divide = res->len;
+
+ bus_cur = find_bus_wprev (res->busno, NULL, 0);
+
+ if (!bus_cur) {
+ /* didn't find a bus, smth's wrong!!! */
+ err ("no bus in the system, either pci_dev's wrong or allocation failed \n");
+ return -EINVAL;
+ }
+
+ debug ("%s - enter\n", __FUNCTION__);
+ debug ("bus_cur->busno is %d\n", bus_cur->busno);
+
+ /* This is a quick fix to not mess up with the code very much. i.e.,
+ * 2000-2fff, len = 1000, but when we compare, we need it to be fff */
+ res->len -= 1;
+
+ switch (res->type) {
+ case IO:
+ res_cur = bus_cur->firstIO;
+ noranges = bus_cur->noIORanges;
+ break;
+ case MEM:
+ res_cur = bus_cur->firstMem;
+ noranges = bus_cur->noMemRanges;
+ break;
+ case PFMEM:
+ res_cur = bus_cur->firstPFMem;
+ noranges = bus_cur->noPFMemRanges;
+ break;
+ default:
+ err ("wrong type of resource to check \n");
+ return -EINVAL;
+ }
+ res_prev = NULL;
+
+ while (res_cur) {
+ range = find_range (bus_cur, res_cur);
+ debug ("%s - rangeno = %d\n", __FUNCTION__, res_cur->rangeno);
+
+ if (!range) {
+ err ("no range for the device exists... bailing out...\n");
+ return -EINVAL;
+ }
+
+ /* found our range */
+ if (!res_prev) {
+ /* first time in the loop */
+ if ((res_cur->start != range->start) && ((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
+ debug ("len_tmp = %x\n", len_tmp);
+
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+
+ if ((range->start % tmp_divide) == 0) {
+ /* just perfect, starting address is divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = range->start;
+ } else {
+ /* Needs adjusting */
+ tmp_start = range->start;
+ flag = FALSE;
+
+ while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= res_cur->start - 1)
+ break;
+ }
+ }
+
+ if (flag && len_cur == res->len) {
+ debug ("but we are not here, right?\n");
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ }
+ if (!res_cur->next) {
+ /* last device on the range */
+ if ((range->end != res_cur->end) && ((len_tmp = range->end - (res_cur->end + 1)) >= res->len)) {
+ debug ("len_tmp = %x\n", len_tmp);
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+
+ if (((res_cur->end + 1) % tmp_divide) == 0) {
+ /* just perfect, starting address is divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = res_cur->end + 1;
+ } else {
+ /* Needs adjusting */
+ tmp_start = res_cur->end + 1;
+ flag = FALSE;
+
+ while ((len_tmp = range->end - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= range->end)
+ break;
+ }
+ }
+ if (flag && len_cur == res->len) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ }
+
+ if (res_prev) {
+ if (res_prev->rangeno != res_cur->rangeno) {
+ /* 1st device on this range */
+ if ((res_cur->start != range->start) &&
+ ((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+ if ((range->start % tmp_divide) == 0) {
+ /* just perfect, starting address is divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = range->start;
+ } else {
+ /* Needs adjusting */
+ tmp_start = range->start;
+ flag = FALSE;
+
+ while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= res_cur->start - 1)
+ break;
+ }
+ }
+
+ if (flag && len_cur == res->len) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ } else {
+ /* in the same range */
+ if ((len_tmp = res_cur->start - 1 - res_prev->end - 1) >= res->len) {
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+ if (((res_prev->end + 1) % tmp_divide) == 0) {
+ /* just perfect, starting address's divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = res_prev->end + 1;
+ } else {
+ /* Needs adjusting */
+ tmp_start = res_prev->end + 1;
+ flag = FALSE;
+
+ while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= res_cur->start - 1)
+ break;
+ }
+ }
+
+ if (flag && len_cur == res->len) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ }
+ }
+ /* end if (res_prev) */
+ res_prev = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ } /* end of while */
+
+
+ if (!res_prev) {
+ /* 1st device ever */
+ /* need to find appropriate range */
+ switch (res->type) {
+ case IO:
+ range = bus_cur->rangeIO;
+ break;
+ case MEM:
+ range = bus_cur->rangeMem;
+ break;
+ case PFMEM:
+ range = bus_cur->rangePFMem;
+ break;
+ }
+ while (range) {
+ if ((len_tmp = range->end - range->start) >= res->len) {
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+ if ((range->start % tmp_divide) == 0) {
+ /* just perfect, starting address's divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = range->start;
+ } else {
+ /* Needs adjusting */
+ tmp_start = range->start;
+ flag = FALSE;
+
+ while ((len_tmp = range->end - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= range->end)
+ break;
+ }
+ }
+
+ if (flag && len_cur == res->len) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ range = range->next;
+ } /* end of while */
+
+ if ((!range) && (len_cur == 0)) {
+ /* have gone through the list of devices and ranges and haven't found n.e.thing */
+ err ("no appropriate range.. bailing out...\n");
+ return -EINVAL;
+ } else if (len_cur) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+
+ if (!res_cur) {
+ debug ("prev->rangeno = %d, noranges = %d\n", res_prev->rangeno, noranges);
+ if (res_prev->rangeno < noranges) {
+ /* if there're more ranges out there to check */
+ switch (res->type) {
+ case IO:
+ range = bus_cur->rangeIO;
+ break;
+ case MEM:
+ range = bus_cur->rangeMem;
+ break;
+ case PFMEM:
+ range = bus_cur->rangePFMem;
+ break;
+ }
+ while (range) {
+ if ((len_tmp = range->end - range->start) >= res->len) {
+ if ((len_tmp < len_cur) || (len_cur == 0)) {
+ if ((range->start % tmp_divide) == 0) {
+ /* just perfect, starting address's divisible by length */
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = range->start;
+ } else {
+ /* Needs adjusting */
+ tmp_start = range->start;
+ flag = FALSE;
+
+ while ((len_tmp = range->end - tmp_start) >= res->len) {
+ if ((tmp_start % tmp_divide) == 0) {
+ flag = TRUE;
+ len_cur = len_tmp;
+ start_cur = tmp_start;
+ break;
+ }
+ tmp_start += tmp_divide - tmp_start % tmp_divide;
+ if (tmp_start >= range->end)
+ break;
+ }
+ }
+
+ if (flag && len_cur == res->len) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ }
+ }
+ range = range->next;
+ } /* end of while */
+
+ if ((!range) && (len_cur == 0)) {
+ /* have gone through the list of devices and ranges and haven't found n.e.thing */
+ err ("no appropriate range.. bailing out...\n");
+ return -EINVAL;
+ } else if (len_cur) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ }
+ } else {
+ /* no more ranges to check on */
+ if (len_cur) {
+ res->start = start_cur;
+ res->len += 1; /* To restore the balance */
+ res->end = res->start + res->len - 1;
+ return 0;
+ } else {
+ /* have gone through the list of devices and haven't found n.e.thing */
+ err ("no appropriate range.. bailing out...\n");
+ return -EINVAL;
+ }
+ }
+ } /* end if(!res_cur) */
+ return -EINVAL;
+}
+
+/********************************************************************************
+ * This routine is called from remove_card if the card contained PPB.
+ * It will remove all the resources on the bus as well as the bus itself
+ * Input: Bus
+ * Ouput: 0, -ENODEV
+ ********************************************************************************/
+int ibmphp_remove_bus (struct bus_node *bus, u8 parent_busno)
+{
+ struct resource_node *res_cur;
+ struct resource_node *res_tmp;
+ struct bus_node *prev_bus;
+ int rc;
+
+ prev_bus = find_bus_wprev (parent_busno, NULL, 0);
+
+ if (!prev_bus) {
+ err ("something terribly wrong. Cannot find parent bus to the one to remove\n");
+ return -ENODEV;
+ }
+
+ debug ("In ibmphp_remove_bus... prev_bus->busno is %x\n", prev_bus->busno);
+
+ rc = remove_ranges (bus, prev_bus);
+ if (rc)
+ return rc;
+
+ if (bus->firstIO) {
+ res_cur = bus->firstIO;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus->firstIO = NULL;
+ }
+ if (bus->firstMem) {
+ res_cur = bus->firstMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus->firstMem = NULL;
+ }
+ if (bus->firstPFMem) {
+ res_cur = bus->firstPFMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus->firstPFMem = NULL;
+ }
+
+ if (bus->firstPFMemFromMem) {
+ res_cur = bus->firstPFMemFromMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ res_cur = res_cur->next;
+
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus->firstPFMemFromMem = NULL;
+ }
+
+ list_del (&bus->bus_list);
+ kfree (bus);
+ return 0;
+}
+
+/******************************************************************************
+ * This routine deletes the ranges from a given bus, and the entries from the
+ * parent's bus in the resources
+ * Input: current bus, previous bus
+ * Output: 0, -EINVAL
+ ******************************************************************************/
+static int remove_ranges (struct bus_node *bus_cur, struct bus_node *bus_prev)
+{
+ struct range_node *range_cur;
+ struct range_node *range_tmp;
+ int i;
+ struct resource_node *res = NULL;
+
+ if (bus_cur->noIORanges) {
+ range_cur = bus_cur->rangeIO;
+ for (i = 0; i < bus_cur->noIORanges; i++) {
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, IO) < 0)
+ return -EINVAL;
+ ibmphp_remove_resource (res);
+
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ bus_cur->rangeIO = NULL;
+ }
+ if (bus_cur->noMemRanges) {
+ range_cur = bus_cur->rangeMem;
+ for (i = 0; i < bus_cur->noMemRanges; i++) {
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, MEM) < 0)
+ return -EINVAL;
+
+ ibmphp_remove_resource (res);
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ bus_cur->rangeMem = NULL;
+ }
+ if (bus_cur->noPFMemRanges) {
+ range_cur = bus_cur->rangePFMem;
+ for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, PFMEM) < 0)
+ return -EINVAL;
+
+ ibmphp_remove_resource (res);
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ bus_cur->rangePFMem = NULL;
+ }
+ return 0;
+}
+
+/*
+ * find the resource node in the bus
+ * Input: Resource needed, start address of the resource, type or resource
+ */
+int ibmphp_find_resource (struct bus_node *bus, u32 start_address, struct resource_node **res, int flag)
+{
+ struct resource_node *res_cur = NULL;
+ char * type = "";
+
+ switch (flag) {
+ case IO:
+ res_cur = bus->firstIO;
+ type = "io";
+ break;
+ case MEM:
+ res_cur = bus->firstMem;
+ type = "mem";
+ break;
+ case PFMEM:
+ res_cur = bus->firstPFMem;
+ type = "pfmem";
+ break;
+ default:
+ err ("wrong type of flag \n");
+ return -EINVAL;
+ }
+
+ while (res_cur) {
+ if (res_cur->start == start_address) {
+ *res = res_cur;
+ break;
+ }
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ }
+
+ if (!res_cur) {
+ if (flag == PFMEM) {
+ res_cur = bus->firstPFMemFromMem;
+ while (res_cur) {
+ if (res_cur->start == start_address) {
+ *res = res_cur;
+ break;
+ }
+ res_cur = res_cur->next;
+ }
+ if (!res_cur) {
+ err ("SOS...cannot find %s resource in the bus. \n", type);
+ return -EINVAL;
+ }
+ } else {
+ err ("SOS... cannot find %s resource in the bus. \n", type);
+ return -EINVAL;
+ }
+ }
+
+ if (*res)
+ debug ("*res->start = %x \n", (*res)->start);
+
+ return 0;
+}
+
+/***********************************************************************
+ * This routine will free the resource structures used by the
+ * system. It is called from cleanup routine for the module
+ * Parameters: none
+ * Returns: none
+ ***********************************************************************/
+void ibmphp_free_resources (void)
+{
+ struct bus_node *bus_cur = NULL;
+ struct bus_node *bus_tmp;
+ struct range_node *range_cur;
+ struct range_node *range_tmp;
+ struct resource_node *res_cur;
+ struct resource_node *res_tmp;
+ struct list_head *tmp;
+ struct list_head *next;
+ int i = 0;
+ flags = 1;
+
+ list_for_each_safe (tmp, next, &gbuses) {
+ bus_cur = list_entry (tmp, struct bus_node, bus_list);
+ if (bus_cur->noIORanges) {
+ range_cur = bus_cur->rangeIO;
+ for (i = 0; i < bus_cur->noIORanges; i++) {
+ if (!range_cur)
+ break;
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ }
+ if (bus_cur->noMemRanges) {
+ range_cur = bus_cur->rangeMem;
+ for (i = 0; i < bus_cur->noMemRanges; i++) {
+ if (!range_cur)
+ break;
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ }
+ if (bus_cur->noPFMemRanges) {
+ range_cur = bus_cur->rangePFMem;
+ for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+ if (!range_cur)
+ break;
+ range_tmp = range_cur;
+ range_cur = range_cur->next;
+ kfree (range_tmp);
+ range_tmp = NULL;
+ }
+ }
+
+ if (bus_cur->firstIO) {
+ res_cur = bus_cur->firstIO;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus_cur->firstIO = NULL;
+ }
+ if (bus_cur->firstMem) {
+ res_cur = bus_cur->firstMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus_cur->firstMem = NULL;
+ }
+ if (bus_cur->firstPFMem) {
+ res_cur = bus_cur->firstPFMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ if (res_cur->next)
+ res_cur = res_cur->next;
+ else
+ res_cur = res_cur->nextRange;
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus_cur->firstPFMem = NULL;
+ }
+
+ if (bus_cur->firstPFMemFromMem) {
+ res_cur = bus_cur->firstPFMemFromMem;
+ while (res_cur) {
+ res_tmp = res_cur;
+ res_cur = res_cur->next;
+
+ kfree (res_tmp);
+ res_tmp = NULL;
+ }
+ bus_cur->firstPFMemFromMem = NULL;
+ }
+
+ bus_tmp = bus_cur;
+ list_del (&bus_cur->bus_list);
+ kfree (bus_tmp);
+ bus_tmp = NULL;
+ }
+}
+
+/*********************************************************************************
+ * This function will go over the PFmem resources to check if the EBDA allocated
+ * pfmem out of memory buckets of the bus. If so, it will change the range numbers
+ * and a flag to indicate that this resource is out of memory. It will also move the
+ * Pfmem out of the pfmem resource list to the PFMemFromMem list, and will create
+ * a new Mem node
+ * This routine is called right after initialization
+ *******************************************************************************/
+static int once_over (void)
+{
+ struct resource_node *pfmem_cur;
+ struct resource_node *pfmem_prev;
+ struct resource_node *mem;
+ struct bus_node *bus_cur;
+ struct list_head *tmp;
+
+ list_for_each (tmp, &gbuses) {
+ bus_cur = list_entry (tmp, struct bus_node, bus_list);
+ if ((!bus_cur->rangePFMem) && (bus_cur->firstPFMem)) {
+ for (pfmem_cur = bus_cur->firstPFMem, pfmem_prev = NULL; pfmem_cur; pfmem_prev = pfmem_cur, pfmem_cur = pfmem_cur->next) {
+ pfmem_cur->fromMem = TRUE;
+ if (pfmem_prev)
+ pfmem_prev->next = pfmem_cur->next;
+ else
+ bus_cur->firstPFMem = pfmem_cur->next;
+
+ if (!bus_cur->firstPFMemFromMem)
+ pfmem_cur->next = NULL;
+ else
+ /* we don't need to sort PFMemFromMem since we're using mem node for
+ all the real work anyways, so just insert at the beginning of the
+ list
+ */
+ pfmem_cur->next = bus_cur->firstPFMemFromMem;
+
+ bus_cur->firstPFMemFromMem = pfmem_cur;
+
+ mem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!mem) {
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (mem, 0, sizeof (struct resource_node));
+ mem->type = MEM;
+ mem->busno = pfmem_cur->busno;
+ mem->devfunc = pfmem_cur->devfunc;
+ mem->start = pfmem_cur->start;
+ mem->end = pfmem_cur->end;
+ mem->len = pfmem_cur->len;
+ if (ibmphp_add_resource (mem) < 0)
+ err ("Trouble...trouble... EBDA allocated pfmem from mem, but system doesn't display it has this space... unless not PCI device...\n");
+ pfmem_cur->rangeno = mem->rangeno;
+ } /* end for pfmem */
+ } /* end if */
+ } /* end list_for_each bus */
+ return 0;
+}
+
+int ibmphp_add_pfmem_from_mem (struct resource_node *pfmem)
+{
+ struct bus_node *bus_cur = find_bus_wprev (pfmem->busno, NULL, 0);
+
+ if (!bus_cur) {
+ err ("cannot find bus of pfmem to add...\n");
+ return -ENODEV;
+ }
+
+ if (bus_cur->firstPFMemFromMem)
+ pfmem->next = bus_cur->firstPFMemFromMem;
+ else
+ pfmem->next = NULL;
+
+ bus_cur->firstPFMemFromMem = pfmem;
+
+ return 0;
+}
+
+/* This routine just goes through the buses to see if the bus already exists.
+ * It is called from ibmphp_find_sec_number, to find out a secondary bus number for
+ * bridged cards
+ * Parameters: bus_number
+ * Returns: Bus pointer or NULL
+ */
+struct bus_node *ibmphp_find_res_bus (u8 bus_number)
+{
+ return find_bus_wprev (bus_number, NULL, 0);
+}
+
+static inline struct bus_node *find_bus_wprev (u8 bus_number, struct bus_node **prev, u8 flag)
+{
+ struct bus_node *bus_cur;
+ struct list_head *tmp;
+ struct list_head *tmp_prev;
+
+ list_for_each (tmp, &gbuses) {
+ tmp_prev = tmp->prev;
+ bus_cur = list_entry (tmp, struct bus_node, bus_list);
+ if (flag)
+ *prev = list_entry (tmp_prev, struct bus_node, bus_list);
+ if (bus_cur->busno == bus_number)
+ return bus_cur;
+ }
+
+ return NULL;
+}
+
+void ibmphp_print_test (void)
+{
+ int i = 0;
+ struct bus_node *bus_cur = NULL;
+ struct range_node *range;
+ struct resource_node *res;
+ struct list_head *tmp;
+
+ if ((!list_empty(&gbuses)) && flags) {
+ err ("The GBUSES is not NULL?!?!?!?!?\n");
+ return;
+ }
+
+ list_for_each (tmp, &gbuses) {
+ bus_cur = list_entry (tmp, struct bus_node, bus_list);
+ debug ("This is bus # %d. There are \n", bus_cur->busno);
+ debug ("IORanges = %d\t", bus_cur->noIORanges);
+ debug ("MemRanges = %d\t", bus_cur->noMemRanges);
+ debug ("PFMemRanges = %d\n", bus_cur->noPFMemRanges);
+ debug ("The IO Ranges are as follows:\n");
+ if (bus_cur->rangeIO) {
+ range = bus_cur->rangeIO;
+ for (i = 0; i < bus_cur->noIORanges; i++) {
+ debug ("rangeno is %d\n", range->rangeno);
+ debug ("[%x - %x]\n", range->start, range->end);
+ range = range->next;
+ }
+ }
+
+ debug ("The Mem Ranges are as follows:\n");
+ if (bus_cur->rangeMem) {
+ range = bus_cur->rangeMem;
+ for (i = 0; i < bus_cur->noMemRanges; i++) {
+ debug ("rangeno is %d\n", range->rangeno);
+ debug ("[%x - %x]\n", range->start, range->end);
+ range = range->next;
+ }
+ }
+
+ debug ("The PFMem Ranges are as follows:\n");
+
+ if (bus_cur->rangePFMem) {
+ range = bus_cur->rangePFMem;
+ for (i = 0; i < bus_cur->noPFMemRanges; i++) {
+ debug ("rangeno is %d\n", range->rangeno);
+ debug ("[%x - %x]\n", range->start, range->end);
+ range = range->next;
+ }
+ }
+
+ debug ("The resources on this bus are as follows\n");
+
+ debug ("IO...\n");
+ if (bus_cur->firstIO) {
+ res = bus_cur->firstIO;
+ while (res) {
+ debug ("The range # is %d\n", res->rangeno);
+ debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ if (res->next)
+ res = res->next;
+ else if (res->nextRange)
+ res = res->nextRange;
+ else
+ break;
+ }
+ }
+ debug ("Mem...\n");
+ if (bus_cur->firstMem) {
+ res = bus_cur->firstMem;
+ while (res) {
+ debug ("The range # is %d\n", res->rangeno);
+ debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ if (res->next)
+ res = res->next;
+ else if (res->nextRange)
+ res = res->nextRange;
+ else
+ break;
+ }
+ }
+ debug ("PFMem...\n");
+ if (bus_cur->firstPFMem) {
+ res = bus_cur->firstPFMem;
+ while (res) {
+ debug ("The range # is %d\n", res->rangeno);
+ debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ if (res->next)
+ res = res->next;
+ else if (res->nextRange)
+ res = res->nextRange;
+ else
+ break;
+ }
+ }
+
+ debug ("PFMemFromMem...\n");
+ if (bus_cur->firstPFMemFromMem) {
+ res = bus_cur->firstPFMemFromMem;
+ while (res) {
+ debug ("The range # is %d\n", res->rangeno);
+ debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ res = res->next;
+ }
+ }
+ }
+}
+
+/* This routine will read the windows for any PPB we have and update the
+ * range info for the secondary bus, and will also input this info into
+ * primary bus, since BIOS doesn't. This is for PPB that are in the system
+ * on bootup
+ * Input: primary busno
+ * Returns: none
+ * Note: this function doesn't take into account IO restrictions etc,
+ * so will only work for bridges with no video/ISA devices behind them It
+ * also will not work for onboard PPB's that can have more than 1 *bus
+ * behind them All these are TO DO.
+ * Also need to add more error checkings... (from fnc returns etc)
+ */
+static int update_bridge_ranges (struct bus_node **bus)
+{
+ u8 sec_busno, device, function, busno, hdr_type, start_io_address, end_io_address;
+ u16 vendor_id, upper_io_start, upper_io_end, start_mem_address, end_mem_address;
+ u32 start_address, end_address, upper_start, upper_end;
+ struct bus_node *bus_sec;
+ struct bus_node *bus_cur;
+ struct resource_node *io;
+ struct resource_node *mem;
+ struct resource_node *pfmem;
+ struct range_node *range;
+ bus_cur = *bus;
+ busno = bus_cur->busno;
+
+ debug ("inside update_bridge_ranges \n");
+ debug ("bus_cur->busno = %x\n", bus_cur->busno);
+
+ for (device = 0; device < 32; device++) {
+ for (function = 0x00; function < 0x08; function++) {
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_VENDOR_ID, &vendor_id);
+
+ if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+ /* found correct device!!! */
+ pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_HEADER_TYPE, &hdr_type);
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ function = 0x8;
+ break;
+ case PCI_HEADER_TYPE_MULTIDEVICE:
+ break;
+ case PCI_HEADER_TYPE_BRIDGE:
+ function = 0x8;
+ case PCI_HEADER_TYPE_MULTIBRIDGE:
+ /* We assume here that only 1 bus behind the bridge
+ TO DO: add functionality for several:
+ temp = secondary;
+ while (temp < subordinate) {
+ ...
+ temp++;
+ }
+ */
+ pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_SECONDARY_BUS, &sec_busno);
+ bus_sec = find_bus_wprev (sec_busno, NULL, 0);
+ pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_BASE, &start_io_address);
+ pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_LIMIT, &end_io_address);
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_BASE_UPPER16, &upper_io_start);
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_LIMIT_UPPER16, &upper_io_end);
+ start_address = (start_io_address & PCI_IO_RANGE_MASK) << 8;
+ start_address |= (upper_io_start << 16);
+ end_address = (end_io_address & PCI_IO_RANGE_MASK) << 8;
+ end_address |= (upper_io_end << 16);
+
+ if ((start_address) && (start_address <= end_address)) {
+
+ range = kmalloc (sizeof (struct range_node), GFP_KERNEL);
+
+ if (!range) {
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (range, 0, sizeof (struct range_node));
+ range->start = start_address;
+ range->end = end_address + 0xfff;
+
+ if (bus_sec->noIORanges > 0)
+ add_range (IO, range, bus_sec);
+ else {
+ /* 1st IO Range on the bus */
+ range->rangeno = 1;
+ bus_sec->rangeIO = range;
+ }
+
+ ++bus_sec->noIORanges;
+ fix_resources (bus_sec);
+
+ io = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!io) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (io, 0, sizeof (struct resource_node));
+ io->type = IO;
+ io->busno = bus_cur->busno;
+ io->devfunc = ((device << 3) | (function & 0x7));
+ io->start = start_address;
+ io->end = end_address + 0xfff;
+ io->len = io->end - io->start + 1;
+
+ ibmphp_add_resource (io);
+ }
+
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_MEMORY_BASE, &start_mem_address);
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_MEMORY_LIMIT, &end_mem_address);
+
+ start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+ end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+
+ if ((start_address) && (start_address <= end_address)) {
+
+ range = kmalloc (sizeof (struct range_node), GFP_KERNEL);
+ if (!range) {
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (range, 0, sizeof (struct range_node));
+ range->start = start_address;
+ range->end = end_address + 0xfffff;
+
+ if (bus_sec->noMemRanges > 0)
+ add_range (MEM, range, bus_sec);
+ else {
+ /* 1st Mem Range on the bus */
+ range->rangeno = 1;
+ bus_sec->rangeMem = range;
+ }
+
+ ++bus_sec->noMemRanges;
+ fix_resources (bus_sec);
+
+ mem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!mem) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (mem, 0, sizeof (struct resource_node));
+ mem->type = MEM;
+ mem->busno = bus_cur->busno;
+ mem->devfunc = ((device << 3) | (function & 0x7));
+ mem->start = start_address;
+ mem->end = end_address + 0xfffff;
+ mem->len = mem->end - mem->start + 1;
+ ibmphp_add_resource (mem);
+ }
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_MEMORY_BASE, &start_mem_address);
+ pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_MEMORY_LIMIT, &end_mem_address);
+ pci_read_config_dword_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_BASE_UPPER32, &upper_start);
+ pci_read_config_dword_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_LIMIT_UPPER32, &upper_end);
+ start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+ end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16;
+#if BITS_PER_LONG == 64
+ start_address |= ((long) upper_start) << 32;
+ end_address |= ((long) upper_end) << 32;
+#endif
+
+ if ((start_address) && (start_address <= end_address)) {
+
+ range = kmalloc (sizeof (struct range_node), GFP_KERNEL);
+ if (!range) {
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (range, 0, sizeof (struct range_node));
+ range->start = start_address;
+ range->end = end_address + 0xfffff;
+
+ if (bus_sec->noPFMemRanges > 0)
+ add_range (PFMEM, range, bus_sec);
+ else {
+ /* 1st PFMem Range on the bus */
+ range->rangeno = 1;
+ bus_sec->rangePFMem = range;
+ }
+
+ ++bus_sec->noPFMemRanges;
+ fix_resources (bus_sec);
+
+ pfmem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!pfmem) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (pfmem, 0, sizeof (struct resource_node));
+ pfmem->type = PFMEM;
+ pfmem->busno = bus_cur->busno;
+ pfmem->devfunc = ((device << 3) | (function & 0x7));
+ pfmem->start = start_address;
+ pfmem->end = end_address + 0xfffff;
+ pfmem->len = pfmem->end - pfmem->start + 1;
+ pfmem->fromMem = FALSE;
+ ibmphp_add_resource (pfmem);
+ }
+ break;
+ } /* end of switch */
+ } /* end if vendor */
+ } /* end for function */
+ } /* end for device */
+
+ bus = &bus_cur;
+ return 0;
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)