patch-2.4.19 linux-2.4.19/drivers/char/serial167.c

• Lines: 127
• Date: Fri Aug 2 17:39:43 2002
• Orig file: linux-2.4.18/drivers/char/serial167.c
• Orig date: Sun Sep 16 21:23:07 2001

diff -urN linux-2.4.18/drivers/char/serial167.c linux-2.4.19/drivers/char/serial167.c
@@ -1262,7 +1262,7 @@
 			    break;
 		    }
 
-		    cli();
+		    save_flags(flags); cli();		
 		    c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
 				   SERIAL_XMIT_SIZE - info->xmit_head));
 		    memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
@@ -1277,7 +1277,7 @@
 	    up(&tmp_buf_sem);
     } else {
 	    while (1) {
-		    cli();
+		    save_flags(flags); cli();		
 		    c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
 				       SERIAL_XMIT_SIZE - info->xmit_head));
 		    if (c <= 0) {
@@ -1377,7 +1377,7 @@
 #ifdef SERIAL_DEBUG_THROTTLE
   char buf[64];
 	
-    printk("throttle %s: %d....\n", _tty_name(tty, buf),
+    printk("throttle %s: %d....\n", tty_name(tty, buf),
 	   tty->ldisc.chars_in_buffer(tty));
     printk("cy_throttle ttyS%d\n", info->line);
 #endif
@@ -1413,7 +1413,7 @@
 #ifdef SERIAL_DEBUG_THROTTLE
   char buf[64];
 	
-    printk("throttle %s: %d....\n", _tty_name(tty, buf),
+    printk("throttle %s: %d....\n", tty_name(tty, buf),
 	   tty->ldisc.chars_in_buffer(tty));
     printk("cy_unthrottle ttyS%d\n", info->line);
 #endif
@@ -2395,7 +2395,11 @@
     
     memset(&cy_serial_driver, 0, sizeof(struct tty_driver));
     cy_serial_driver.magic = TTY_DRIVER_MAGIC;
+#ifdef CONFIG_DEVFS_FS
+    cy_serial_driver.name = "tts/%d";
+#else
     cy_serial_driver.name = "ttyS";
+#endif
     cy_serial_driver.major = TTY_MAJOR;
     cy_serial_driver.minor_start = 64;
     cy_serial_driver.num = NR_PORTS;
@@ -2430,7 +2434,11 @@
      * major number and the subtype code.
      */
     cy_callout_driver = cy_serial_driver;
+#ifdef CONFIG_DEVFS_FS
+    cy_callout_driver.name = "cua/%d";
+#else
     cy_callout_driver.name = "cua";
+#endif
     cy_callout_driver.major = TTYAUX_MAJOR;
     cy_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
 
@@ -2806,58 +2814,6 @@
 	restore_flags(flags);
 }
 
-/* This is a hack; if there are multiple chars waiting in the chip we
- * discard all but the last one, and return that.  The cd2401 is not really
- * designed to be driven in polled mode.
- */
-
-int serial167_console_wait_key(struct console *co)
-{
-	volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
-	unsigned long flags;
-	volatile u_char sink;
-	u_char ier;
-	int port;
-	int keypress = 0;
-
-	save_flags(flags); cli();
-
-	/* Ensure receiver is enabled! */
-
-	port = 0;
-	base_addr[CyCAR] = (u_char)port;
-	while (base_addr[CyCCR])
-		;
-	base_addr[CyCCR] = CyENB_RCVR;
-	ier = base_addr[CyIER];
-	base_addr[CyIER] = CyRxData;
-
-	while (!keypress) {
-		if (pcc2chip[PccSCCRICR] & 0x20)
-		{
-			/* We have an Rx int. Acknowledge it */
-			sink = pcc2chip[PccRPIACKR];
-			if ((base_addr[CyLICR] >> 2) == port) {
-				int cnt = base_addr[CyRFOC];
-				while (cnt-- > 0)
-				{
-					keypress = base_addr[CyRDR];
-				}
-				base_addr[CyREOIR] = 0;
-			}
-			else
-				base_addr[CyREOIR] = CyNOTRANS;
-		}
-	}
-
-	base_addr[CyIER] = ier;
-
-	restore_flags(flags);
-
-	return keypress;
-}
-
-
 static kdev_t serial167_console_device(struct console *c)
 {
 	return MKDEV(TTY_MAJOR, 64 + c->index);
@@ -2874,7 +2830,6 @@
 	name:		"ttyS",
 	write:		serial167_console_write,
 	device:		serial167_console_device,
-	wait_key:	serial167_console_wait_key,
 	setup:		serial167_console_setup,
 	flags:		CON_PRINTBUFFER,
 	index:		-1,