patch-2.4.19 linux-2.4.19/drivers/bluetooth/hci_h4.c

• Lines: 274
• Date: Fri Aug 2 17:39:43 2002
• Orig file: linux-2.4.18/drivers/bluetooth/hci_h4.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.18/drivers/bluetooth/hci_h4.c linux-2.4.19/drivers/bluetooth/hci_h4.c
@@ -0,0 +1,273 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+/*
+ * BlueZ HCI UART(H4) protocol.
+ *
+ * $Id: hci_h4.c,v 1.2 2002/04/17 17:37:20 maxk Exp $    
+ */
+#define VERSION "1.1"
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include "hci_uart.h"
+#include "hci_h4.h"
+
+#ifndef HCI_UART_DEBUG
+#undef  BT_DBG
+#define BT_DBG( A... )
+#undef  BT_DMP
+#define BT_DMP( A... )
+#endif
+
+/* Initialize protocol */
+static int h4_open(struct n_hci *n_hci)
+{
+	struct h4_struct *h4;
+	
+	BT_DBG("n_hci %p", n_hci);
+	
+	h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
+	if (!h4)
+		return -ENOMEM;
+	memset(h4, 0, sizeof(*h4));
+
+	n_hci->priv = h4;
+	return 0;
+}
+
+/* Flush protocol data */
+static int h4_flush(struct n_hci *n_hci)
+{
+	BT_DBG("n_hci %p", n_hci);
+	return 0;
+}
+
+/* Close protocol */
+static int h4_close(struct n_hci *n_hci)
+{
+	struct h4_struct *h4 = n_hci->priv;
+	n_hci->priv = NULL;
+
+	BT_DBG("n_hci %p", n_hci);
+
+	if (h4->rx_skb)
+		kfree_skb(h4->rx_skb);
+
+	kfree(h4);
+	return 0;
+}
+
+/* Send data */
+static int h4_send(struct n_hci *n_hci, void *data, int len)
+{
+	struct tty_struct *tty = n_hci->tty;
+	
+	BT_DBG("n_hci %p len %d", n_hci, len);
+
+	/* Send frame to TTY driver */
+	tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+	return tty->driver.write(tty, 0, data, len);
+}
+
+/* Init frame before queueing (padding, crc, etc) */
+static struct sk_buff* h4_preq(struct n_hci *n_hci, struct sk_buff *skb)
+{
+	BT_DBG("n_hci %p skb %p", n_hci, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &skb->pkt_type, 1);
+	return skb;
+}
+
+static inline int h4_check_data_len(struct h4_struct *h4, int len)
+{
+	register int room = skb_tailroom(h4->rx_skb);
+
+	BT_DBG("len %d room %d", len, room);
+	if (!len) {
+		BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
+		hci_recv_frame(h4->rx_skb);
+	} else if (len > room) {
+		BT_ERR("Data length is to large");
+		kfree_skb(h4->rx_skb);
+	} else {
+		h4->rx_state = H4_W4_DATA;
+		h4->rx_count = len;
+		return len;
+	}
+
+	h4->rx_state = H4_W4_PACKET_TYPE;
+	h4->rx_skb   = NULL;
+	h4->rx_count = 0;
+	return 0;
+}
+
+/* Recv data */
+static int h4_recv(struct n_hci *n_hci, void *data, int count)
+{
+	struct h4_struct *h4 = n_hci->priv;
+	register char *ptr;
+	hci_event_hdr *eh;
+	hci_acl_hdr   *ah;
+	hci_sco_hdr   *sh;
+	register int len, type, dlen;
+
+	BT_DBG("n_hci %p count %d rx_state %ld rx_count %ld", n_hci, count, h4->rx_state, h4->rx_count);
+
+	ptr = data;
+	while (count) {
+		if (h4->rx_count) {
+			len = MIN(h4->rx_count, count);
+			memcpy(skb_put(h4->rx_skb, len), ptr, len);
+			h4->rx_count -= len; count -= len; ptr += len;
+
+			if (h4->rx_count)
+				continue;
+
+			switch (h4->rx_state) {
+			case H4_W4_DATA:
+				BT_DBG("Complete data");
+
+				BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
+
+				hci_recv_frame(h4->rx_skb);
+
+				h4->rx_state = H4_W4_PACKET_TYPE;
+				h4->rx_skb = NULL;
+				continue;
+
+			case H4_W4_EVENT_HDR:
+				eh = (hci_event_hdr *) h4->rx_skb->data;
+
+				BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen);
+
+				h4_check_data_len(h4, eh->plen);
+				continue;
+
+			case H4_W4_ACL_HDR:
+				ah = (hci_acl_hdr *) h4->rx_skb->data;
+				dlen = __le16_to_cpu(ah->dlen);
+
+				BT_DBG("ACL header: dlen %d", dlen);
+
+				h4_check_data_len(h4, dlen);
+				continue;
+
+			case H4_W4_SCO_HDR:
+				sh = (hci_sco_hdr *) h4->rx_skb->data;
+
+				BT_DBG("SCO header: dlen %d", sh->dlen);
+
+				h4_check_data_len(h4, sh->dlen);
+				continue;
+			};
+		}
+
+		/* H4_W4_PACKET_TYPE */
+		switch (*ptr) {
+		case HCI_EVENT_PKT:
+			BT_DBG("Event packet");
+			h4->rx_state = H4_W4_EVENT_HDR;
+			h4->rx_count = HCI_EVENT_HDR_SIZE;
+			type = HCI_EVENT_PKT;
+			break;
+
+		case HCI_ACLDATA_PKT:
+			BT_DBG("ACL packet");
+			h4->rx_state = H4_W4_ACL_HDR;
+			h4->rx_count = HCI_ACL_HDR_SIZE;
+			type = HCI_ACLDATA_PKT;
+			break;
+
+		case HCI_SCODATA_PKT:
+			BT_DBG("SCO packet");
+			h4->rx_state = H4_W4_SCO_HDR;
+			h4->rx_count = HCI_SCO_HDR_SIZE;
+			type = HCI_SCODATA_PKT;
+			break;
+
+		default:
+			BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr);
+			n_hci->hdev.stat.err_rx++;
+			ptr++; count--;
+			continue;
+		};
+		ptr++; count--;
+
+		/* Allocate packet */
+		h4->rx_skb = bluez_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+		if (!h4->rx_skb) {
+			BT_ERR("Can't allocate mem for new packet");
+			h4->rx_state = H4_W4_PACKET_TYPE;
+			h4->rx_count = 0;
+			return 0;
+		}
+		h4->rx_skb->dev = (void *) &n_hci->hdev;
+		h4->rx_skb->pkt_type = type;
+	}
+	return count;
+}
+
+static struct hci_uart_proto h4p = {
+	id:    HCI_UART_H4,
+	open:  h4_open,
+	close: h4_close,
+	send:  h4_send,
+	recv:  h4_recv,
+	preq:  h4_preq,
+	flush: h4_flush,
+};
+	      
+int h4_init(void)
+{
+	return hci_uart_register_proto(&h4p);
+}
+
+int h4_deinit(void)
+{
+	return hci_uart_unregister_proto(&h4p);
+}