patch-2.4.19 linux-2.4.19/arch/ia64/sn/sn1/error.c

• Lines: 150
• Date: Wed Dec 31 16:00:00 1969
• Orig file: linux-2.4.18/arch/ia64/sn/sn1/error.c
• Orig date: Thu Apr 5 12:51:47 2001

diff -urN linux-2.4.18/arch/ia64/sn/sn1/error.c linux-2.4.19/arch/ia64/sn/sn1/error.c
@@ -1,149 +0,0 @@
-
-
-/*
- * SN1 Platform specific error Support
- *
- * Copyright (C) 2001 Silicon Graphics, Inc.
- * Copyright (C) 2001 Alan Mayer (ajm@sgi.com)
- */
-
-
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-
-#include <asm/ptrace.h>
-#include <linux/devfs_fs_kernel.h>
-#include <asm/smp.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/sn1/bedrock.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/addrs.h>
-
-void
-snia_error_intr_handler(int irq, void *devid, struct pt_regs *pt_regs) {
-	unsigned long long intpend_val;
-	unsigned long long bit;
-
-	switch (irq) {
-	case SGI_UART_IRQ:
-		// This isn't really an error interrupt.  We're just
-		// here because we have to do something with them.
-		// This is probably wrong, and this code will be
-		// removed.
-		intpend_val = LOCAL_HUB_L(PI_INT_PEND0);
-		if ( (bit = ~(1L<<GFX_INTR_A)) ==
-			(intpend_val & ~(1L<<GFX_INTR_A)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		if ( (bit = ~(1L<<GFX_INTR_B)) ==
-			(intpend_val & ~(1L<<GFX_INTR_B)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		if ( (bit = ~(1L<<PG_MIG_INTR)) ==
-			(intpend_val & ~(1L<<PG_MIG_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		if ( (bit = ~(1L<<UART_INTR)) ==
-			(intpend_val & ~(1L<<UART_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		if ( (bit = ~(1L<<CC_PEND_A)) ==
-			(intpend_val & ~(1L<<CC_PEND_A)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		if ( (bit = ~(1L<<CC_PEND_B)) ==
-			(intpend_val & ~(1L<<CC_PEND_B)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			return;
-		}
-		printk("Received SGI_UART_IRQ (65), but no intpend0 bits were set???\n");
-		return;
-	case SGI_HUB_ERROR_IRQ:
-		// These are mostly error interrupts of various
-		// sorts.  We need to do more than panic here, but
-		// what the heck, this is bring up.
-		intpend_val = LOCAL_HUB_L(PI_INT_PEND1);
-		
-		if ( (bit = ~(1L<<XB_ERROR)) ==
-			(intpend_val & ~(1L<<XB_ERROR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED XB_ERROR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<LB_ERROR)) ==
-			(intpend_val & ~(1L<<LB_ERROR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED LB_ERROR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<NACK_INT_A)) ==
-			(intpend_val & ~(1L<<NACK_INT_A)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED NACK_INT_A on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<NACK_INT_B)) ==
-			(intpend_val & ~(1L<<NACK_INT_B)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED NACK_INT_B on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<CLK_ERR_INTR)) ==
-			(intpend_val & ~(1L<<CLK_ERR_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED CLK_ERR_INTR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<COR_ERR_INTR_A)) ==
-			(intpend_val & ~(1L<<COR_ERR_INTR_A)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED COR_ERR_INTR_A on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<COR_ERR_INTR_B)) ==
-			(intpend_val & ~(1L<<COR_ERR_INTR_B)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED COR_ERR_INTR_B on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<MD_COR_ERR_INTR)) ==
-			(intpend_val & ~(1L<<MD_COR_ERR_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED MD_COR_ERR_INTR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<NI_ERROR_INTR)) ==
-			(intpend_val & ~(1L<<NI_ERROR_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED NI_ERROR_INTR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		if ( (bit = ~(1L<<MSC_PANIC_INTR)) ==
-			(intpend_val & ~(1L<<MSC_PANIC_INTR)) ) {
-			LOCAL_HUB_CLR_INTR(bit);
-			panic("RECEIVED MSC_PANIC_INTR on cpu %d, cnode %d\n",
-				smp_processor_id(), 
-				cpuid_to_cnodeid(smp_processor_id()));
-		}
-		printk("Received SGI_XB_ERROR_IRQ (182) but no intpend1 bits are set???\n");
-		return;
-	default:
-		printk("Received invalid irq in snia_error_intr_handler()/n");
-	}
-}