patch-2.4.15 linux/drivers/net/tulip/pnic2.c
Next file: linux/drivers/net/tulip/tulip.h
Previous file: linux/drivers/net/tulip/pnic.c
Back to the patch index
Back to the overall index
- Lines: 408
- Date:
Fri Nov 9 13:45:35 2001
- Orig file:
v2.4.14/linux/drivers/net/tulip/pnic2.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.14/linux/drivers/net/tulip/pnic2.c linux/drivers/net/tulip/pnic2.c
@@ -0,0 +1,407 @@
+/*
+ drivers/net/tulip/pnic2.c
+
+ Maintained by Jeff Garzik <jgarzik@mandrakesoft.com>
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+ Modified to hep support PNIC_II by Kevin B. Hendricks
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please refer to Documentation/DocBook/tulip.{pdf,ps,html}
+ for more information on this driver, or visit the project
+ Web page at http://sourceforge.net/projects/tulip/
+
+*/
+
+
+/* Understanding the PNIC_II - everything is this file is based
+ * on the PNIC_II_PDF datasheet which is sorely lacking in detail
+ *
+ * As I understand things, here are the registers and bits that
+ * explain the masks and constants used in this file that are
+ * either different from the 21142/3 or important for basic operation.
+ *
+ *
+ * CSR 6 (mask = 0xfe3bd1fd of bits not to change)
+ * -----
+ * Bit 24 - SCR
+ * Bit 23 - PCS
+ * Bit 22 - TTM (Trasmit Threshold Mode)
+ * Bit 18 - Port Select
+ * Bit 13 - Start - 1, Stop - 0 Transmissions
+ * Bit 11:10 - Loop Back Operation Mode
+ * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set)
+ * Bit 1 - Start - 1, Stop - 0 Receive
+ *
+ *
+ * CSR 14 (mask = 0xfff0ee39 of bits not to change)
+ * ------
+ * Bit 19 - PAUSE-Pause
+ * Bit 18 - Advertise T4
+ * Bit 17 - Advertise 100baseTx-FD
+ * Bit 16 - Advertise 100baseTx-HD
+ * Bit 12 - LTE - Link Test Enable
+ * Bit 7 - ANE - Auto Negotiate Enable
+ * Bit 6 - HDE - Advertise 10baseT-HD
+ * Bit 2 - Reset to Power down - kept as 1 for normal operation
+ * Bit 1 - Loop Back enable for 10baseT MCC
+ *
+ *
+ * CSR 12
+ * ------
+ * Bit 25 - Partner can do T4
+ * Bit 24 - Partner can do 100baseTx-FD
+ * Bit 23 - Partner can do 100baseTx-HD
+ * Bit 22 - Partner can do 10baseT-FD
+ * Bit 21 - Partner can do 10baseT-HD
+ * Bit 15 - LPN is 1 if all above bits are valid other wise 0
+ * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate)
+ * Bit 3 - Autopolarity state
+ * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed
+ * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild
+ *
+ *
+ * Data Port Selection Info
+ *-------------------------
+ *
+ * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT
+ * 1 0 0 (X) 0 (X) 1 NWAY
+ * 0 0 1 0 (X) 0 10baseT
+ * 0 1 0 1 1 (X) 100baseT
+ *
+ *
+ */
+
+
+
+#include "tulip.h"
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+
+void pnic2_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct tulip_private *tp = (struct tulip_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int next_tick = 60*HZ;
+
+ if (tulip_debug > 3)
+ printk(KERN_INFO"%s: PNIC2 negotiation status %8.8x.\n",
+ dev->name,inl(ioaddr + CSR12));
+
+ if (next_tick) {
+ mod_timer(&tp->timer, RUN_AT(next_tick));
+ }
+}
+
+
+void pnic2_start_nway(struct net_device *dev)
+{
+ struct tulip_private *tp = (struct tulip_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int csr14;
+ int csr12;
+
+ /* set up what to advertise during the negotiation */
+
+ /* load in csr14 and mask off bits not to touch
+ * comment at top of file explains mask value
+ */
+ csr14 = (inl(ioaddr + CSR14) & 0xfff0ee39);
+
+ /* bit 17 - advetise 100baseTx-FD */
+ if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000;
+
+ /* bit 16 - advertise 100baseTx-HD */
+ if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000;
+
+ /* bit 6 - advertise 10baseT-HD */
+ if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040;
+
+ /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable
+ * and bit 0 Don't PowerDown 10baseT
+ */
+ csr14 |= 0x00001184;
+
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, "
+ "csr14=%8.8x.\n", dev->name, csr14);
+
+ /* tell pnic2_lnk_change we are doing an nway negotiation */
+ dev->if_port = 0;
+ tp->nway = tp->mediasense = 1;
+ tp->nwayset = tp->lpar = 0;
+
+ /* now we have to set up csr6 for NWAY state */
+
+ tp->csr6 = inl(ioaddr + CSR6);
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: On Entry to Nway, "
+ "csr6=%8.8x.\n", dev->name, tp->csr6);
+
+ /* mask off any bits not to touch
+ * comment at top of file explains mask value
+ */
+ tp->csr6 = tp->csr6 & 0xfe3bd1fd;
+
+ /* don't forget that bit 9 is also used for advertising */
+ /* advertise 10baseT-FD for the negotiation (bit 9) */
+ if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200;
+
+ /* set bit 24 for nway negotiation mode ...
+ * see Data Port Selection comment at top of file
+ * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1)
+ */
+ tp->csr6 |= 0x01000000;
+ outl(csr14, ioaddr + CSR14);
+ outl(tp->csr6, ioaddr + CSR6);
+ udelay(100);
+
+ /* all set up so now force the negotiation to begin */
+
+ /* read in current values and mask off all but the
+ * Autonegotiation bits 14:12. Writing a 001 to those bits
+ * should start the autonegotiation
+ */
+ csr12 = (inl(ioaddr + CSR12) & 0xffff8fff);
+ csr12 |= 0x1000;
+ outl(csr12, ioaddr + CSR12);
+}
+
+
+
+void pnic2_lnk_change(struct net_device *dev, int csr5)
+{
+ struct tulip_private *tp = (struct tulip_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int csr14;
+
+ /* read the staus register to find out what is up */
+ int csr12 = inl(ioaddr + CSR12);
+
+ if (tulip_debug > 1)
+ printk(KERN_INFO"%s: PNIC2 link status interrupt %8.8x, "
+ " CSR5 %x, %8.8x.\n", dev->name, csr12,
+ csr5, inl(ioaddr + CSR14));
+
+ /* If NWay finished and we have a negotiated partner capability.
+ * check bits 14:12 for bit pattern 101 - all is good
+ */
+ if (tp->nway && !tp->nwayset) {
+
+ /* we did an auto negotiation */
+
+ if ((csr12 & 0x7000) == 0x5000) {
+
+ /* negotiation ended successfully */
+
+ /* get the link partners reply and mask out all but
+ * bits 24-21 which show the partners capabilites
+ * and match those to what we advertised
+ *
+ * then begin to interpret the results of the negotiation.
+ * Always go in this order : (we are ignoring T4 for now)
+ * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD
+ */
+
+ int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise;
+ tp->lpar = (csr12 >> 16);
+ tp->nwayset = 1;
+
+ if (negotiated & 0x0100) dev->if_port = 5;
+ else if (negotiated & 0x0080) dev->if_port = 3;
+ else if (negotiated & 0x0040) dev->if_port = 4;
+ else if (negotiated & 0x0020) dev->if_port = 0;
+ else {
+ if (tulip_debug > 1)
+ printk(KERN_INFO "%s: funny autonegotiate result "
+ "csr12 %8.8x advertising %4.4x\n",
+ dev->name, csr12, tp->sym_advertise);
+ tp->nwayset = 0;
+ /* so check if 100baseTx link state is okay */
+ if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180))
+ dev->if_port = 3;
+ }
+
+ /* now record the duplex that was negotiated */
+ tp->full_duplex = 0;
+ if ((dev->if_port == 4) || (dev->if_port == 5))
+ tp->full_duplex = 1;
+
+ if (tulip_debug > 1) {
+ if (tp->nwayset)
+ printk(KERN_INFO "%s: Switching to %s based on link "
+ "negotiation %4.4x & %4.4x = %4.4x.\n",
+ dev->name, medianame[dev->if_port],
+ tp->sym_advertise, tp->lpar, negotiated);
+ }
+
+ /* remember to turn off bit 7 - autonegotiate
+ * enable so we can properly end nway mode and
+ * set duplex (ie. use csr6<9> again)
+ */
+ csr14 = (inl(ioaddr + CSR14) & 0xffffff7f);
+ outl(csr14,ioaddr + CSR14);
+
+
+ /* now set the data port and operating mode
+ * (see the Data Port Selection comments at
+ * the top of the file
+ */
+
+ /* get current csr6 and mask off bits not to touch */
+ /* see comment at top of file */
+
+ tp->csr6 = (inl(ioaddr + CSR6) & 0xfe3bd1fd);
+
+ /* so if using if_port 3 or 5 then select the 100baseT
+ * port else select the 10baseT port.
+ * See the Data Port Selection table at the top
+ * of the file which was taken from the PNIC_II.PDF
+ * datasheet
+ */
+ if (dev->if_port & 1) tp->csr6 |= 0x01840000;
+ else tp->csr6 |= 0x00400000;
+
+ /* now set the full duplex bit appropriately */
+ if (tp->full_duplex) tp->csr6 |= 0x00000200;
+
+ outl(1, ioaddr + CSR13);
+
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: Setting CSR6 %8.8x/%x CSR12 "
+ "%8.8x.\n", dev->name, tp->csr6,
+ inl(ioaddr + CSR6), inl(ioaddr + CSR12));
+
+ /* now the following actually writes out the
+ * new csr6 values
+ */
+ tulip_start_rxtx(tp);
+
+ return;
+
+ } else {
+ printk(KERN_INFO "%s: Autonegotiation failed, "
+ "using %s, link beat status %4.4x.\n",
+ dev->name, medianame[dev->if_port], csr12);
+
+ /* remember to turn off bit 7 - autonegotiate
+ * enable so we don't forget
+ */
+ csr14 = (inl(ioaddr + CSR14) & 0xffffff7f);
+ outl(csr14,ioaddr + CSR14);
+
+ /* what should we do when autonegotiate fails?
+ * should we try again or default to baseline
+ * case. I just don't know.
+ *
+ * for now default to some baseline case
+ */
+
+ dev->if_port = 0;
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* set to 10baseTx-HD - see Data Port Selection
+ * comment given at the top of the file
+ */
+ tp->csr6 = (inl(ioaddr + CSR6) & 0xfe3bd1fd);
+ tp->csr6 |= 0x00400000;
+
+ tulip_restart_rxtx(tp);
+
+ return;
+
+ }
+ }
+
+ if ((tp->nwayset && (csr5 & 0x08000000)
+ && (dev->if_port == 3 || dev->if_port == 5)
+ && (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) {
+
+ /* Link blew? Maybe restart NWay. */
+
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name);
+
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+
+ return;
+ }
+
+
+ if (dev->if_port == 3 || dev->if_port == 5) {
+
+ /* we are at 100mb and a potential link change occurred */
+
+ if (tulip_debug > 1)
+ printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
+ dev->name, medianame[dev->if_port],
+ (csr12 & 2) ? "failed" : "good");
+
+ /* check 100 link beat */
+
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* if failed then try doing an nway to get in sync */
+ if ((csr12 & 2) && ! tp->medialock) {
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+ }
+
+ return;
+ }
+
+ if (dev->if_port == 0 || dev->if_port == 4) {
+
+ /* we are at 10mb and a potential link change occurred */
+
+ if (tulip_debug > 1)
+ printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
+ dev->name, medianame[dev->if_port],
+ (csr12 & 4) ? "failed" : "good");
+
+
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* if failed, try doing an nway to get in sync */
+ if ((csr12 & 4) && ! tp->medialock) {
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+ }
+
+ return;
+ }
+
+
+ if (tulip_debug > 1)
+ printk(KERN_INFO"%s: PNIC2 Link Change Default?\n",dev->name);
+
+ /* if all else fails default to trying 10baseT-HD */
+ dev->if_port = 0;
+
+ /* make sure autonegotiate enable is off */
+ csr14 = (inl(ioaddr + CSR14) & 0xffffff7f);
+ outl(csr14,ioaddr + CSR14);
+
+ /* set to 10baseTx-HD - see Data Port Selection
+ * comment given at the top of the file
+ */
+ tp->csr6 = (inl(ioaddr + CSR6) & 0xfe3bd1fd);
+ tp->csr6 |= 0x00400000;
+
+ tulip_restart_rxtx(tp);
+}
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)