patch-2.4.15 linux/drivers/hotplug/cpqphp_core.c

Next file: linux/drivers/hotplug/cpqphp_ctrl.c
Previous file: linux/drivers/hotplug/cpqphp.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.14/linux/drivers/hotplug/cpqphp_core.c linux/drivers/hotplug/cpqphp_core.c
@@ -0,0 +1,1439 @@
+/*
+ * Compaq Hot Plug Controller Driver
+ *
+ * Copyright (c) 1995,2001 Compaq Computer Corporation
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (c) 2001 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include "cpqphp.h"
+#include "cpqphp_nvram.h"
+#include "../../arch/i386/kernel/pci-i386.h"	/* horrible hack showing how processor dependant we are... */
+
+
+/* Global variables */
+int cpqhp_debug;
+struct controller *cpqhp_ctrl_list;	/* = NULL */
+struct pci_func *cpqhp_slot_list[256];
+
+/* local variables */
+static void *smbios_table;
+static void *smbios_start;
+static void *cpqhp_rom_start;
+static u8 power_mode;
+static int debug;
+
+#define DRIVER_VERSION	"0.9.6"
+#define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
+#define DRIVER_DESC	"Compaq Hot Plug PCI Controller Driver"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(power_mode, "b");
+MODULE_PARM_DESC(power_mode, "Power mode enabled or not");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
+
+#define CPQHPC_MODULE_MINOR 208
+
+static int one_time_init (void);
+static int set_attention_status (struct hotplug_slot *slot, u8 value);
+static int process_SI		(struct hotplug_slot *slot);
+static int process_SS		(struct hotplug_slot *slot);
+static int hardware_test	(struct hotplug_slot *slot, u32 value);
+static int get_power_status	(struct hotplug_slot *slot, u8 *value);
+static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
+static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
+static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
+	owner:			THIS_MODULE,
+	set_attention_status:	set_attention_status,
+	enable_slot:		process_SI,
+	disable_slot:		process_SS,
+	hardware_test:		hardware_test,
+	get_power_status:	get_power_status,
+	get_attention_status:	get_attention_status,
+	get_latch_status:	get_latch_status,
+	get_adapter_status:	get_adapter_status,
+};
+
+
+static inline int is_slot64bit (struct slot *slot)
+{
+	if (!slot || !slot->p_sm_slot)
+		return 0;
+
+	if (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06)
+		return 1;
+
+	return 0;
+}
+
+static inline int is_slot66mhz (struct slot *slot)
+{
+	if (!slot || !slot->p_sm_slot)
+		return 0;
+
+	if (readb(slot->p_sm_slot + SMBIOS_SLOT_TYPE) == 0x0E)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * detect_SMBIOS_pointer - find the system Management BIOS Table in the specified region of memory.
+ *
+ * @begin: begin pointer for region to be scanned.
+ * @end: end pointer for region to be scanned.
+ *
+ * Returns pointer to the head of the SMBIOS tables (or NULL)
+ *
+ */
+static void * detect_SMBIOS_pointer(void *begin, void *end)
+{
+	void *fp;
+	void *endp;
+	u8 temp1, temp2, temp3, temp4;
+	int status = 0;
+
+	endp = (end - sizeof(u32) + 1);
+
+	for (fp = begin; fp <= endp; fp += 16) {
+		temp1 = readb(fp);
+		temp2 = readb(fp+1);
+		temp3 = readb(fp+2);
+		temp4 = readb(fp+3);
+		if (temp1 == '_' &&
+		    temp2 == 'S' &&
+		    temp3 == 'M' &&
+		    temp4 == '_') {
+			status = 1;
+			break;
+		}
+	}
+	
+	if (!status)
+		fp = NULL;
+
+	dbg("Discovered SMBIOS Entry point at %p\n", fp);
+
+	return fp;
+}
+
+/**
+ * init_SERR - Initializes the per slot SERR generation.
+ *
+ * For unexpected switch opens
+ *
+ */
+static int init_SERR(struct controller * ctrl)
+{
+	u32 tempdword;
+	u32 number_of_slots;
+	u8 physical_slot;
+
+	if (!ctrl)
+		return 1;
+
+	tempdword = ctrl->first_slot;
+
+	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+	// Loop through slots
+	while (number_of_slots) {
+		physical_slot = tempdword;
+		writeb(0, ctrl->hpc_reg + SLOT_SERR);
+		tempdword++;
+		number_of_slots--;
+	}
+
+	return 0;
+}
+
+
+/* nice debugging output */
+static int pci_print_IRQ_route (void)
+{
+	struct irq_routing_table *routing_table;
+	int len;
+	int loop;
+
+	u8 tbus, tdevice, tslot;
+
+	routing_table = pcibios_get_irq_routing_table();
+	if (routing_table == NULL) {
+		err("No BIOS Routing Table??? Not good\n");
+		return -ENOMEM;
+	}
+
+	len = (routing_table->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	// Make sure I got at least one entry
+	if (len == 0) {
+		kfree(routing_table);
+		return -1;
+	}
+
+	dbg("bus dev func slot\n");
+
+	for (loop = 0; loop < len; ++loop) {
+		tbus = routing_table->slots[loop].bus;
+		tdevice = routing_table->slots[loop].devfn;
+		tslot = routing_table->slots[loop].slot;
+		dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
+
+	}
+	kfree(routing_table);
+	return 0;
+}
+
+
+/*
+ * get_subsequent_smbios_entry
+ *
+ * Gets the first entry if previous == NULL
+ * Otherwise, returns the next entry
+ * Uses global SMBIOS Table pointer
+ *
+ * @curr: %NULL or pointer to previously returned structure
+ *
+ * returns a pointer to an SMBIOS structure or NULL if none found
+ */
+static void * get_subsequent_smbios_entry(void *smbios_start, void *smbios_table, void *curr)
+{
+	u8 bail = 0;
+	u8 previous_byte = 1;
+	void *p_temp;
+	void *p_max;
+
+	if (!smbios_table || !curr)
+		return(NULL);
+
+	// set p_max to the end of the table
+	p_max = smbios_start + readw(smbios_table + ST_LENGTH);
+
+	p_temp = curr;
+	p_temp += readb(curr + SMBIOS_GENERIC_LENGTH);
+
+	while ((p_temp < p_max) && !bail) {
+		// Look for the double NULL terminator
+		// The first condition is the previous byte and the second is the curr
+		if (!previous_byte && !(readb(p_temp))) {
+			bail = 1;
+		}
+
+		previous_byte = readb(p_temp);
+		p_temp++;
+	}
+
+	if (p_temp < p_max) {
+		return p_temp;
+	} else {
+		return NULL;
+	}
+}
+
+
+/**
+ * get_SMBIOS_entry
+ *
+ * @type:SMBIOS structure type to be returned
+ * @previous: %NULL or pointer to previously returned structure
+ *
+ * Gets the first entry of the specified type if previous == NULL
+ * Otherwise, returns the next entry of the given type.
+ * Uses global SMBIOS Table pointer
+ * Uses get_subsequent_smbios_entry
+ *
+ * returns a pointer to an SMBIOS structure or %NULL if none found
+ */
+static void *get_SMBIOS_entry (void *smbios_start, void *smbios_table, u8 type, void * previous)
+{
+	if (!smbios_table)
+		return NULL;
+
+	if (!previous) {		  
+		previous = smbios_start;
+	} else {
+		previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous);
+	}
+
+	while (previous) {
+	       	if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+			previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous);
+		} else {
+			break;
+		}
+	}
+
+	return previous;
+}
+
+
+static int ctrl_slot_setup (struct controller * ctrl, void *smbios_start, void *smbios_table)
+{
+	struct slot *new_slot;
+	u8 number_of_slots;
+	u8 slot_device;
+	u8 slot_number;
+	u8 ctrl_slot;
+	u32 tempdword;
+	void *slot_entry= NULL;
+	int result;
+
+	dbg(__FUNCTION__"\n");
+
+	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+	slot_number = ctrl->first_slot;
+
+	while (number_of_slots) {
+		new_slot = (struct slot *) kmalloc(sizeof(struct slot), GFP_KERNEL);
+		if (!new_slot)
+			return -ENOMEM;
+
+		memset(new_slot, 0, sizeof(struct slot));
+		new_slot->hotplug_slot = kmalloc (sizeof (struct hotplug_slot), GFP_KERNEL);
+		if (!new_slot->hotplug_slot) {
+			kfree (new_slot);
+			return -ENOMEM;
+		}
+		memset(new_slot->hotplug_slot, 0, sizeof (struct hotplug_slot));
+
+		new_slot->hotplug_slot->info = kmalloc (sizeof (struct hotplug_slot_info), GFP_KERNEL);
+		if (!new_slot->hotplug_slot->info) {
+			kfree (new_slot->hotplug_slot);
+			kfree (new_slot);
+			return -ENOMEM;
+		}
+		memset(new_slot->hotplug_slot->info, 0, sizeof (struct hotplug_slot_info));
+		new_slot->hotplug_slot->name = kmalloc (SLOT_NAME_SIZE, GFP_KERNEL);
+		if (!new_slot->hotplug_slot->name) {
+			kfree (new_slot->hotplug_slot->info);
+			kfree (new_slot->hotplug_slot);
+			kfree (new_slot);
+			return -ENOMEM;
+		}
+
+		new_slot->magic = SLOT_MAGIC;
+		new_slot->ctrl = ctrl;
+		new_slot->bus = ctrl->bus;
+		new_slot->device = slot_device;
+		new_slot->number = slot_number;
+		dbg("slot->number = %d\n",new_slot->number);
+
+		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry);
+
+		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != new_slot->number)) {
+			slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry);
+		}
+
+		new_slot->p_sm_slot = slot_entry;
+
+		init_timer(&new_slot->task_event);
+		new_slot->task_event.expires = jiffies + 5 * HZ;
+		new_slot->task_event.function = cpqhp_pushbutton_thread;
+
+		//FIXME: these capabilities aren't used but if they are
+		//       they need to be correctly implemented
+		new_slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+		new_slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+
+		if (is_slot64bit(new_slot))
+			new_slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+		if (is_slot66mhz(new_slot))
+			new_slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+		if (ctrl->speed == 1)
+			new_slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+
+		ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+
+		// Check presence
+		new_slot->capabilities |= ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+		// Check the switch state
+		new_slot->capabilities |= ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+		// Check the slot enable
+		new_slot->capabilities |= ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+
+		/* register this slot with the hotplug pci core */
+		new_slot->hotplug_slot->private = new_slot;
+		make_slot_name (new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot);
+		new_slot->hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+		
+		new_slot->hotplug_slot->info->power_status = get_slot_enabled(ctrl, new_slot);
+		new_slot->hotplug_slot->info->attention_status = cpq_get_attention_status(ctrl, new_slot);
+		new_slot->hotplug_slot->info->latch_status = cpq_get_latch_status(ctrl, new_slot);
+		new_slot->hotplug_slot->info->adapter_status = get_presence_status(ctrl, new_slot);
+		
+		dbg ("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n", 
+		     new_slot->bus, new_slot->device, new_slot->number, ctrl->slot_device_offset, slot_number);
+		result = pci_hp_register (new_slot->hotplug_slot);
+		if (result) {
+			err ("pci_hp_register failed with error %d\n", result);
+			return result;
+		}
+		
+		new_slot->next = ctrl->slot;
+		ctrl->slot = new_slot;
+
+		number_of_slots--;
+		slot_device++;
+		slot_number++;
+	}
+
+	return(0);
+}
+
+
+static int ctrl_slot_cleanup (struct controller * ctrl)
+{
+	struct slot *old_slot, *next_slot;
+
+	old_slot = ctrl->slot;
+	ctrl->slot = NULL;
+
+	while (old_slot) {
+		next_slot = old_slot->next;
+		pci_hp_deregister (old_slot->hotplug_slot);
+		kfree(old_slot->hotplug_slot);
+		kfree(old_slot);
+		old_slot = next_slot;
+	}
+
+	//Free IRQ associated with hot plug device
+	free_irq(ctrl->interrupt, ctrl);
+	//Unmap the memory
+	iounmap(ctrl->hpc_reg);
+	//Finally reclaim PCI mem
+	release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
+			   pci_resource_len(ctrl->pci_dev, 0));
+
+	return(0);
+}
+
+
+//============================================================================
+// function:	get_slot_mapping
+//
+// Description: Attempts to determine a logical slot mapping for a PCI
+//		device.  Won't work for more than one PCI-PCI bridge
+//		in a slot.
+//
+// Input:	u8 bus_num - bus number of PCI device
+//		u8 dev_num - device number of PCI device
+//		u8 *slot - Pointer to u8 where slot number will
+//			be returned
+//
+// Output:	SUCCESS or FAILURE
+//=============================================================================
+static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *slot)
+{
+	struct irq_routing_table *PCIIRQRoutingInfoLength;
+	u32 work;
+	long len;
+	long loop;
+
+	u8 tbus, tdevice, tslot, bridgeSlot;
+
+	dbg(__FUNCTION__" %p, %d, %d, %p\n", ops, bus_num, dev_num, slot);
+
+	bridgeSlot = 0xFF;
+
+	PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
+
+	len = (PCIIRQRoutingInfoLength->size -
+	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	// Make sure I got at least one entry
+	if (len == 0) {
+		if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
+		return -1;
+	}
+
+
+	for (loop = 0; loop < len; ++loop) {
+		tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
+		tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
+		tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+
+		if ((tbus == bus_num) && (tdevice == dev_num)) {
+			*slot = tslot;
+
+			if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
+			return 0;
+		} else {
+			// Didn't get a match on the target PCI device. Check if the
+			// current IRQ table entry is a PCI-to-PCI bridge device.  If so,
+			// and it's secondary bus matches the bus number for the target 
+			// device, I need to save the bridge's slot number.  If I can't 
+			// find an entry for the target device, I will have to assume it's 
+			// on the other side of the bridge, and assign it the bridge's slot.
+			pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_REVISION_ID, &work);
+
+			if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
+				pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_PRIMARY_BUS, &work);
+				// See if bridge's secondary bus matches target bus.
+				if (((work >> 8) & 0x000000FF) == (long) bus_num) {
+					bridgeSlot = tslot;
+				}
+			}
+		}
+
+	}
+
+
+	// If we got here, we didn't find an entry in the IRQ mapping table 
+	// for the target PCI device.  If we did determine that the target 
+	// device is on the other side of a PCI-to-PCI bridge, return the 
+	// slot number for the bridge.
+	if (bridgeSlot != 0xFF) {
+		*slot = bridgeSlot;
+		if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
+		return 0;
+	}
+	if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
+	// Couldn't find an entry in the routing table for this PCI device
+	return -1;
+}
+
+
+/**
+ * cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
+ *
+ */
+static int cpqhp_set_attention_status (struct controller *ctrl, struct pci_func *func, u32 status)
+{
+	u8 hp_slot;
+
+	hp_slot = func->device - ctrl->slot_device_offset;
+
+	if (func == NULL)
+		return(1);
+
+	// Wait for exclusive access to hardware
+	down(&ctrl->crit_sect);
+
+	if (status == 1) {
+		amber_LED_on (ctrl, hp_slot);
+	} else if (status == 0) {
+		amber_LED_off (ctrl, hp_slot);
+	} else {
+		// Done with exclusive hardware access
+		up(&ctrl->crit_sect);
+		return(1);
+	}
+
+	set_SOGO(ctrl);
+
+	// Wait for SOBS to be unset
+	wait_for_ctrl_irq (ctrl);
+
+	// Done with exclusive hardware access
+	up(&ctrl->crit_sect);
+
+	return(0);
+}
+
+
+/**
+ * set_attention_status - Turns the Amber LED for a slot on or off
+ *
+ */
+static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
+{
+	struct pci_func *slot_func;
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	u8 bus;
+	u8 devfn;
+	u8 device;
+	u8 function;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
+		return -ENODEV;
+
+	device = devfn >> 3;
+	function = devfn & 0x7;
+	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
+
+	slot_func = cpqhp_slot_find(bus, device, function);
+	if (!slot_func) {
+		return -ENODEV;
+	}
+
+	return cpqhp_set_attention_status(ctrl, slot_func, status);
+}
+
+
+static int process_SI (struct hotplug_slot *hotplug_slot)
+{
+	struct pci_func *slot_func;
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	u8 bus;
+	u8 devfn;
+	u8 device;
+	u8 function;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
+		return -ENODEV;
+
+	device = devfn >> 3;
+	function = devfn & 0x7;
+	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
+
+	slot_func = cpqhp_slot_find(bus, device, function);
+	if (!slot_func) {
+		return -ENODEV;
+	}
+
+	slot_func->bus = bus;
+	slot_func->device = device;
+	slot_func->function = function;
+	slot_func->configured = 0;
+	dbg("board_added(%p, %p)\n", slot_func, ctrl);
+	return cpqhp_process_SI(ctrl, slot_func);
+}
+
+
+static int process_SS (struct hotplug_slot *hotplug_slot)
+{
+	struct pci_func *slot_func;
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	u8 bus;
+	u8 devfn;
+	u8 device;
+	u8 function;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
+		return -ENODEV;
+
+	device = devfn >> 3;
+	function = devfn & 0x7;
+	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
+
+	slot_func = cpqhp_slot_find(bus, device, function);
+	if (!slot_func) {
+		return -ENODEV;
+	}
+	
+	dbg("In power_down_board, slot_func = %p, ctrl = %p\n", slot_func, ctrl);
+	return cpqhp_process_SS(ctrl, slot_func);
+}
+
+
+static int hardware_test (struct hotplug_slot *hotplug_slot, u32 value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+
+	dbg(__FUNCTION__"\n");
+
+	if (slot == NULL)
+		return -ENODEV;
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+
+	return cpqhp_hardware_test (ctrl, value);	
+}
+
+
+static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = get_slot_enabled(ctrl, slot);
+	return 0;
+}
+
+static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = cpq_get_attention_status(ctrl, slot);
+	return 0;
+}
+
+static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = cpq_get_latch_status (ctrl, slot);
+
+	return 0;
+}
+
+static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+	
+	dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = get_presence_status (ctrl, slot);
+
+	return 0;
+}
+
+static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	u8 num_of_slots = 0;
+	u8 hp_slot = 0;
+	u8 device;
+	u8 rev;
+	u16 temp_word;
+	u16 vendor_id;
+	u16 subsystem_vid;
+	u16 subsystem_deviceid;
+	u32 rc;
+	struct controller *ctrl;
+	struct pci_func *func;
+
+	// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
+	rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
+	if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
+		err(msg_HPC_non_compaq_or_intel);
+		return -ENODEV;
+	}
+	dbg("Vendor ID: %x\n", vendor_id);
+
+	rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+	dbg("revision: %d\n", rev);
+	if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
+		err(msg_HPC_rev_error);
+		return -ENODEV;
+	}
+
+	/* Check for the proper subsytem ID's
+	 * Intel uses a different SSID programming model than Compaq.  
+	 * For Intel, each SSID bit identifies a PHP capability.
+	 * Also Intel HPC's may have RID=0.
+	 */
+	if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
+		// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
+		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
+		if (rc) {
+			err(__FUNCTION__" : pci_read_config_word failed\n");
+			return rc;
+		}
+		dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
+		if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
+			err(msg_HPC_non_compaq_or_intel);
+			return -ENODEV;
+		}
+
+		ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
+		if (!ctrl) {
+			err(__FUNCTION__" : out of memory\n");
+			return -ENOMEM;
+		}
+		memset(ctrl, 0, sizeof(struct controller));
+
+		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
+		if (rc) {
+			err(__FUNCTION__" : pci_read_config_word failed\n");
+			goto err_free_ctrl;
+		}
+
+		info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
+
+		/* Set Vendor ID, so it can be accessed later from other functions */
+		ctrl->vendor_id = vendor_id;
+
+		switch (subsystem_vid) {
+			case PCI_VENDOR_ID_COMPAQ:
+				switch (subsystem_deviceid) {
+					case PCI_SUB_HPC_ID:
+						/* Original 6500/7000 implementation */
+						ctrl->slot_switch_type = 1;		// Switch is present
+						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->push_button = 0;			// No pushbutton
+						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+						ctrl->defeature_PHP = 1;			// PHP is supported
+						ctrl->pcix_support = 0;			// PCI-X not supported
+						ctrl->pcix_speed_capability = 0;		// N/A since PCI-X not supported
+						break;
+					case PCI_SUB_HPC_ID2:
+						/* First Pushbutton implementation */
+						ctrl->push_flag = 1;
+						ctrl->slot_switch_type = 1;		// Switch is present
+						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->push_button = 1;			// Pushbutton is present
+						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+						ctrl->defeature_PHP = 1;			// PHP is supported
+						ctrl->pcix_support = 0;			// PCI-X not supported
+						ctrl->pcix_speed_capability = 0;		// N/A since PCI-X not supported
+						break;
+					case PCI_SUB_HPC_ID_INTC:
+						/* Third party (6500/7000) */
+						ctrl->slot_switch_type = 1;		// Switch is present
+						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->push_button = 0;			// No pushbutton
+						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+						ctrl->defeature_PHP = 1;			// PHP is supported
+						ctrl->pcix_support = 0;			// PCI-X not supported
+						ctrl->pcix_speed_capability = 0;		// N/A since PCI-X not supported
+						break;
+					case PCI_SUB_HPC_ID3:
+						/* First 66 Mhz implementation */
+						ctrl->push_flag = 1;
+						ctrl->slot_switch_type = 1;		// Switch is present
+						ctrl->speed_capability = CTRL_SPEED_66MHz;
+						ctrl->push_button = 1;			// Pushbutton is present
+						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+						ctrl->defeature_PHP = 1;		// PHP is supported
+						ctrl->pcix_support = 0;			// PCI-X not supported
+						ctrl->pcix_speed_capability = 0;	// N/A since PCI-X not supported
+						break;
+					default:
+						// TODO: Add SSIDs for CPQ systems that support PCI-X
+						err(msg_HPC_not_supported);
+						rc = -ENODEV;
+						goto err_free_ctrl;
+				}
+				break;
+
+			case PCI_VENDOR_ID_INTEL:
+				/* Check for speed capability (0=33, 1=66) */
+				if (subsystem_deviceid & 0x0001) {
+					ctrl->speed_capability = CTRL_SPEED_66MHz;
+				} else {
+					ctrl->speed_capability = CTRL_SPEED_33MHz;
+				}
+
+				/* Check for push button */
+				if (subsystem_deviceid & 0x0002) {
+					/* no push button */
+					ctrl->push_button = 0;
+				} else {
+					/* push button supported */
+					ctrl->push_button = 1;
+				}
+
+				/* Check for slot switch type (0=mechanical, 1=not mechanical) */
+				if (subsystem_deviceid & 0x0004) {
+					/* no switch */
+					ctrl->slot_switch_type = 0;
+				} else {
+					/* switch */
+					ctrl->slot_switch_type = 1;
+				}
+
+				/* PHP Status (0=De-feature PHP, 1=Normal operation) */
+				if (subsystem_deviceid & 0x0008) {
+					ctrl->defeature_PHP = 1;	// PHP supported
+				} else {
+					ctrl->defeature_PHP = 0;	// PHP not supported
+				}
+
+				/* Alternate Base Address Register Interface (0=not supported, 1=supported) */
+				if (subsystem_deviceid & 0x0010) {
+					ctrl->alternate_base_address = 1;	// supported
+				} else {
+					ctrl->alternate_base_address = 0;	// not supported
+				}
+
+				/* PCI Config Space Index (0=not supported, 1=supported) */
+				if (subsystem_deviceid & 0x0020) {
+					ctrl->pci_config_space = 1;		// supported
+				} else {
+					ctrl->pci_config_space = 0;		// not supported
+				}
+
+				/* PCI-X support */
+				if (subsystem_deviceid & 0x0080) {
+					/* PCI-X capable */
+					ctrl->pcix_support = 1;
+					/* Frequency of operation in PCI-X mode */
+					if (subsystem_deviceid & 0x0040) {
+						/* 133MHz PCI-X if bit 7 is 1 */
+						ctrl->pcix_speed_capability = 1;
+					} else {
+						/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
+						/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
+						ctrl->pcix_speed_capability = 0;
+					}
+				} else {
+					/* Conventional PCI */
+					ctrl->pcix_support = 0;
+					ctrl->pcix_speed_capability = 0;
+				}
+				break;
+
+			default:
+				err(msg_HPC_not_supported);
+				rc = -ENODEV;
+				goto err_free_ctrl;
+		}
+
+	} else {
+		err(msg_HPC_not_supported);
+		return -ENODEV;
+	}
+
+	// Tell the user that we found one.
+	info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number);
+
+	dbg ("Hotplug controller capabilities:\n");
+	dbg ("    speed_capability       %s\n", ctrl->speed_capability == CTRL_SPEED_33MHz ? "33MHz" : "66Mhz");
+	dbg ("    slot_switch_type       %s\n", ctrl->slot_switch_type == 0 ? "no switch" : "switch present");
+	dbg ("    defeature_PHP          %s\n", ctrl->defeature_PHP == 0 ? "PHP not supported" : "PHP supported");
+	dbg ("    alternate_base_address %s\n", ctrl->alternate_base_address == 0 ? "not supported" : "supported");
+	dbg ("    pci_config_space       %s\n", ctrl->pci_config_space == 0 ? "not supported" : "supported");
+	dbg ("    pcix_speed_capability  %s\n", ctrl->pcix_speed_capability == 0 ? "not supported" : "supported");
+	dbg ("    pcix_support           %s\n", ctrl->pcix_support == 0 ? "not supported" : "supported");
+
+	ctrl->pci_dev = pdev;
+	ctrl->pci_ops = pdev->bus->ops;
+	ctrl->bus = pdev->bus->number;
+	ctrl->device = PCI_SLOT(pdev->devfn);
+	ctrl->function = PCI_FUNC(pdev->devfn);
+	ctrl->rev = rev;
+	dbg("bus device function rev: %d %d %d %d\n", ctrl->bus, ctrl->device, ctrl->function, ctrl->rev);
+
+	init_MUTEX(&ctrl->crit_sect);
+	init_waitqueue_head(&ctrl->queue);
+
+	/* initialize our threads if they haven't already been started up */
+	rc = one_time_init();
+	if (rc) {
+		goto err_free_ctrl;
+	}
+	
+	dbg("pdev = %p\n", pdev);
+	dbg("pci resource start %lx\n", pci_resource_start(pdev, 0));
+	dbg("pci resource len %lx\n", pci_resource_len(pdev, 0));
+
+	if (!request_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0), MY_NAME)) {
+		err("cannot reserve MMIO region\n");
+		rc = -ENOMEM;
+		goto err_free_ctrl;
+	}
+
+	ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+	if (!ctrl->hpc_reg) {
+		err("cannot remap MMIO region %lx @ %lx\n", pci_resource_len(pdev, 0), pci_resource_start(pdev, 0));
+		rc = -ENODEV;
+		goto err_free_mem_region;
+	}
+
+	// Check for 66Mhz operation
+	// TODO: Add PCI-X support
+	ctrl->speed = get_controller_speed(ctrl);
+
+
+	//**************************************************
+	//
+	//              Save configuration headers for this and
+	//              subordinate PCI buses
+	//
+	//**************************************************
+
+	// find the physical slot number of the first hot plug slot
+
+	// Get slot won't work for devices behind bridges, but
+	// in this case it will always be called for the "base"
+	// bus/dev/func of a slot.
+	// CS: this is leveraging the PCIIRQ routing code from the kernel (pci-pc.c: get_irq_routing_table)
+	rc = get_slot_mapping(ctrl->pci_ops, pdev->bus->number, (readb(ctrl->hpc_reg + SLOT_MASK) >> 4), &(ctrl->first_slot));
+	dbg("get_slot_mapping: first_slot = %d, returned = %d\n", ctrl->first_slot, rc);
+	if (rc) {
+		err(msg_initialization_err, rc);
+		goto err_iounmap;
+	}
+
+	// Store PCI Config Space for all devices on this bus
+	rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
+	if (rc) {
+		err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
+		goto err_iounmap;
+	}
+
+	/*
+	 * Get IO, memory, and IRQ resources for new devices
+	 */
+	rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start);
+	ctrl->add_support = !rc;
+	if (rc) {
+		dbg("cpqhp_find_available_resources = 0x%x\n", rc);
+		err("unable to locate PCI configuration resources for hot plug add.\n");
+		goto err_iounmap;
+	}
+
+	/*
+	 * Finish setting up the hot plug ctrl device
+	 */
+	ctrl->slot_device_offset = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+	dbg("NumSlots %d \n", ctrl->slot_device_offset);
+
+	ctrl->next_event = 0;
+
+	/* Setup the slot information structures */
+	rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
+	if (rc) {
+		err(msg_initialization_err, 6);
+		err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
+		goto err_iounmap;
+	}
+	
+	/* Mask all general input interrupts */
+	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
+
+	/* set up the interrupt */
+	ctrl->interrupt = pdev->irq;
+	dbg("HPC interrupt = %d \n", ctrl->interrupt);
+	if (request_irq(ctrl->interrupt,
+			(void (*)(int, void *, struct pt_regs *)) &cpqhp_ctrl_intr,
+			SA_SHIRQ, MY_NAME, ctrl)) {
+		err("Can't get irq %d for the hotplug pci controller\n", ctrl->interrupt);
+		rc = -ENODEV;
+		goto err_iounmap;
+	}
+
+	/* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
+	temp_word = readw(ctrl->hpc_reg + MISC);
+	temp_word |= 0x4006;
+	writew(temp_word, ctrl->hpc_reg + MISC);
+
+	// Changed 05/05/97 to clear all interrupts at start
+	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+	ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+	writel(0x0L, ctrl->hpc_reg + INT_MASK);
+
+	if (!cpqhp_ctrl_list) {
+		cpqhp_ctrl_list = ctrl;
+		ctrl->next = NULL;
+	} else {
+		ctrl->next = cpqhp_ctrl_list;
+		cpqhp_ctrl_list = ctrl;
+	}
+
+	// turn off empty slots here unless command line option "ON" set
+	// Wait for exclusive access to hardware
+	down(&ctrl->crit_sect);
+
+	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+
+	// find first device number for the ctrl
+	device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+
+	while (num_of_slots) {
+		dbg("num_of_slots: %d\n", num_of_slots);
+		func = cpqhp_slot_find(ctrl->bus, device, 0);
+		if (!func)
+			break;
+
+		hp_slot = func->device - ctrl->slot_device_offset;
+		dbg("hp_slot: %d\n", hp_slot);
+
+		// We have to save the presence info for these slots
+		temp_word = ctrl->ctrl_int_comp >> 16;
+		func->presence_save = (temp_word >> hp_slot) & 0x01;
+		func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
+
+		if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+			func->switch_save = 0;
+		} else {
+			func->switch_save = 0x10;
+		}
+
+		if (!power_mode) {
+			if (!func->is_a_board) {
+				green_LED_off (ctrl, hp_slot);
+				slot_disable (ctrl, hp_slot);
+			}
+		}
+
+		device++;
+		num_of_slots--;
+	}
+
+	if (!power_mode) {
+		set_SOGO(ctrl);
+		// Wait for SOBS to be unset
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	rc = init_SERR(ctrl);
+	if (rc) {
+		err("init_SERR failed\n");
+		up(&ctrl->crit_sect);
+		goto err_free_irq;
+	}
+
+	// Done with exclusive hardware access
+	up(&ctrl->crit_sect);
+
+	rc = cpqhp_proc_create_ctrl (ctrl);
+	if (rc) {
+		err("cpqhp_proc_create_ctrl failed\n");
+		goto err_free_irq;
+	}
+
+	return 0;
+
+err_free_irq:
+	free_irq(ctrl->interrupt, ctrl);
+err_iounmap:
+	iounmap(ctrl->hpc_reg);
+err_free_mem_region:
+	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+err_free_ctrl:
+	kfree(ctrl);
+	return rc;
+}
+
+
+static int one_time_init(void)
+{
+	int loop;
+	int retval = 0;
+	static int initialized = 0;
+
+	if (initialized)
+		return 0;
+
+	power_mode = 0;
+
+	retval = pci_print_IRQ_route();
+	if (retval)
+		goto error;
+
+	dbg("Initialize + Start the notification mechanism \n");
+
+	retval = cpqhp_event_start_thread();
+	if (retval)
+		goto error;
+
+	dbg("Initialize slot lists\n");
+	for (loop = 0; loop < 256; loop++) {
+		cpqhp_slot_list[loop] = NULL;
+	}
+
+	// FIXME: We also need to hook the NMI handler eventually.
+	// this also needs to be worked with Christoph
+	// register_NMI_handler();
+
+	// Map rom address
+	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
+	if (!cpqhp_rom_start) {
+		err ("Could not ioremap memory region for ROM\n");
+		retval = -EIO;;
+		goto error;
+	}
+	
+	/* Now, map the int15 entry point if we are on compaq specific hardware */
+	compaq_nvram_init(cpqhp_rom_start);
+	
+	/* Map smbios table entry point structure */
+	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, cpqhp_rom_start + ROM_PHY_LEN);
+	if (!smbios_table) {
+		err ("Could not find the SMBIOS pointer in memory\n");
+		retval = -EIO;;
+		goto error;
+	}
+
+	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS), readw(smbios_table + ST_LENGTH));
+	if (!smbios_start) {
+		err ("Could not ioremap memory region taken from SMBIOS values\n");
+		retval = -EIO;;
+		goto error;
+	}
+
+	retval = cpqhp_proc_init_ctrl();
+	if (retval)
+		goto error;
+
+	initialized = 1;
+
+	return retval;
+
+error:
+	if (cpqhp_rom_start)
+		iounmap(cpqhp_rom_start);
+	if (smbios_start)
+		iounmap(smbios_start);
+	
+	return retval;
+}
+
+
+static void unload_cpqphpd(void)
+{
+	struct pci_func *next;
+	struct pci_func *TempSlot;
+	int loop;
+	u32 rc;
+	struct controller *ctrl;
+	struct controller *tctrl;
+	struct pci_resource *res;
+	struct pci_resource *tres;
+
+	rc = compaq_nvram_store(cpqhp_rom_start);
+
+	ctrl = cpqhp_ctrl_list;
+
+	while (ctrl) {
+		cpqhp_proc_remove_ctrl (ctrl);
+
+		if (ctrl->hpc_reg) {
+			u16 misc;
+			rc = read_slot_enable (ctrl);
+			
+			writeb(0, ctrl->hpc_reg + SLOT_SERR);
+			writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
+			
+			misc = readw(ctrl->hpc_reg + MISC);
+			misc &= 0xFFFD;
+			writew(misc, ctrl->hpc_reg + MISC);
+		}
+
+		ctrl_slot_cleanup(ctrl);
+
+		res = ctrl->io_head;
+		while (res) {
+			tres = res;
+			res = res->next;
+			kfree(tres);
+		}
+
+		res = ctrl->mem_head;
+		while (res) {
+			tres = res;
+			res = res->next;
+			kfree(tres);
+		}
+
+		res = ctrl->p_mem_head;
+		while (res) {
+			tres = res;
+			res = res->next;
+			kfree(tres);
+		}
+
+		res = ctrl->bus_head;
+		while (res) {
+			tres = res;
+			res = res->next;
+			kfree(tres);
+		}
+
+		tctrl = ctrl;
+		ctrl = ctrl->next;
+		kfree(tctrl);
+	}
+
+	for (loop = 0; loop < 256; loop++) {
+		next = cpqhp_slot_list[loop];
+		while (next != NULL) {
+			res = next->io_head;
+			while (res) {
+				tres = res;
+				res = res->next;
+				kfree(tres);
+			}
+
+			res = next->mem_head;
+			while (res) {
+				tres = res;
+				res = res->next;
+				kfree(tres);
+			}
+
+			res = next->p_mem_head;
+			while (res) {
+				tres = res;
+				res = res->next;
+				kfree(tres);
+			}
+
+			res = next->bus_head;
+			while (res) {
+				tres = res;
+				res = res->next;
+				kfree(tres);
+			}
+
+			TempSlot = next;
+			next = next->next;
+			kfree(TempSlot);
+		}
+	}
+
+	remove_proc_entry("hpc", 0);
+
+	// Stop the notification mechanism
+	cpqhp_event_stop_thread();
+
+	//unmap the rom address
+	if (cpqhp_rom_start)
+		iounmap(cpqhp_rom_start);
+	if (smbios_start)
+		iounmap(smbios_start);
+}
+
+
+
+static struct pci_device_id hpcd_pci_tbl[] __devinitdata = {
+	{
+	/* handle any PCI Hotplug controller */
+	class:          ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
+	class_mask:     ~0,
+	
+	/* no matter who makes it */
+	vendor:         PCI_ANY_ID,
+	device:         PCI_ANY_ID,
+	subvendor:      PCI_ANY_ID,
+	subdevice:      PCI_ANY_ID,
+	
+	}, { /* end: all zeroes */ }
+};
+
+MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
+
+
+
+static struct pci_driver cpqhpc_driver = {
+	name:		"pci_hotplug",
+	id_table:	hpcd_pci_tbl,
+	probe:		cpqhpc_probe,
+	/* remove:	cpqhpc_remove_one, */
+};
+
+
+
+static int __init cpqhpc_init(void)
+{
+	int result;
+
+	cpqhp_debug = debug;
+
+	result = pci_module_init(&cpqhpc_driver);
+	dbg("pci_module_init = %d\n", result);
+	if (result)
+		return result;
+	info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
+	return 0;
+}
+
+
+static void __exit cpqhpc_cleanup(void)
+{
+	dbg("cleaning up proc entries\n");
+	cpqhp_proc_destroy_ctrl();
+
+	dbg("unload_cpqphpd()\n");
+	unload_cpqphpd();
+
+	dbg("pci_unregister_driver\n");
+	pci_unregister_driver(&cpqhpc_driver);
+}
+
+
+module_init(cpqhpc_init);
+module_exit(cpqhpc_cleanup);
+
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)