patch-2.4.11-dontuse linux/drivers/mtd/maps/Config.in
Next file: linux/drivers/mtd/maps/Makefile
Previous file: linux/drivers/mtd/ftl.c
Back to the patch index
Back to the overall index
- Lines: 83
- Date:
Thu Oct 4 15:13:18 2001
- Orig file:
v2.4.10/linux/drivers/mtd/maps/Config.in
- Orig date:
Sun Sep 23 11:40:58 2001
diff -u --recursive --new-file v2.4.10/linux/drivers/mtd/maps/Config.in linux/drivers/mtd/maps/Config.in
@@ -1,6 +1,6 @@
# drivers/mtd/maps/Config.in
-# $Id: Config.in,v 1.9.2.1 2001/06/09 19:43:49 dwmw2 Exp $
+# $Id: Config.in,v 1.16 2001/09/19 18:28:37 dwmw2 Exp $
mainmenu_option next_comment
@@ -14,36 +14,49 @@
fi
if [ "$CONFIG_SPARC" = "y" -o "$CONFIG_SPARC64" = "y" ]; then
- dep_tristate ' Sun Microsystems userflash support' CONFIG_MTD_SUN_UFLASH $CONFIG_SPARC64
+ dep_tristate ' Sun Microsystems userflash support' CONFIG_MTD_SUN_UFLASH $CONFIG_MTD_CFI
fi
-if [ "$CONFIG_ARM" = "y" ]; then
- dep_tristate ' CFI Flash device mapped on Nora' CONFIG_MTD_NORA $CONFIG_MTD_CFI
-fi
-dep_tristate ' CFI Flash device mapped on Photron PNC-2000' CONFIG_MTD_PNC2000 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
-dep_tristate ' CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI
-if [ "$CONFIG_X86" = "y" ]; then
+
+if [ "$CONFIG_X86" = "y" ]; then
+ dep_tristate ' CFI Flash device mapped on Photron PNC-2000' CONFIG_MTD_PNC2000 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
dep_tristate ' CFI Flash device mapped on AMD SC520 CDP' CONFIG_MTD_SC520CDP $CONFIG_MTD_CFI
dep_tristate ' CFI Flash device mapped on AMD NetSc520' CONFIG_MTD_NETSC520 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
+ dep_tristate ' CFI Flash device mapped on Arcom SBC-GXx boards' CONFIG_MTD_SBC_GXX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
+ dep_tristate ' CFI Flash device mapped on Arcom ELAN-104NC' CONFIG_MTD_ELAN_104NC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
+ dep_tristate ' JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC
+ dep_tristate ' JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC
+ dep_tristate ' JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC
+ dep_tristate ' BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_I386 $CONFIG_MTD_JEDEC
fi
-dep_tristate ' CFI Flash device mapped on Arcom SBC-GXx boards' CONFIG_MTD_SBC_GXX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
-dep_tristate ' CFI Flash device mapped on Arcom ELAN-104NC' CONFIG_MTD_ELAN_104NC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
+
+if [ "$CONFIG_PPC" = "y" ]; then
+ dep_tristate ' CFI Flash device mapped on TQM8XXL' CONFIG_MTD_TQM8XXL $CONFIG_MTD_CFI $CONFIG_TQM8xxL $CONFIG_PPC
+ dep_tristate ' CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI $CONFIG_PPC
+ dep_tristate ' CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI_INTELSTD $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_CFI_AMDSTD
+ dep_tristate ' CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFI
+fi
+
+if [ "$CONFIG_MIPS" = "y" ]; then
+ dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS
+ if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
+ hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
+ hex ' Physical length of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_LEN 0x4000000
+ int ' Bus width in octets' CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH 2
+ fi
+ dep_tristate ' Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOT
+fi
+
+if [ "$CONFIG_SH" = "y" ]; then
+ dep_tristate ' CFI Flash device mapped on Hitachi SolutionEngine' CONFIG_MTD_SOLUTIONENGINE $CONFIG_MTD_CFI $CONFIG_SH $CONFIG_MTD_REDBOOT_PARTS
+fi
+
if [ "$CONFIG_ARM" = "y" ]; then
-dep_tristate ' CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS
- dep_bool ' Support for RedBoot partition tables on SA11x0' CONFIG_MTD_SA1100_REDBOOT_PARTITIONS $CONFIG_MTD_SA1100 $CONFIG_MTD_REDBOOT_PARTS
- dep_bool ' Support for Compaq bootldr partition tables on SA11x0' CONFIG_MTD_SA1100_BOOTLDR_PARTITIONS $CONFIG_MTD_SA1100 $CONFIG_MTD_BOOTLDR_PARTS
+ dep_tristate ' CFI Flash device mapped on Nora' CONFIG_MTD_NORA $CONFIG_MTD_CFI
+ dep_tristate ' CFI Flash device mapped on ARM Integrator/P720T' CONFIG_MTD_ARM_INTEGRATOR $CONFIG_MTD_CFI
+ dep_tristate ' Cirrus CDB89712 evaluation board mappings' CONFIG_MTD_CDB89712 $CONFIG_MTD_CFI $CONFIG_ARCH_CDB89712
+ dep_tristate ' CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS
dep_tristate ' CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE $CONFIG_MTD_PARTITIONS
- dep_tristate ' CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_XSCALE_IQ80310
+ dep_tristate ' CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_ARCH_IQ80310
fi
-dep_tristate ' CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI_INTELSTD $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_CFI_AMDSTD
-dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS
-if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
- hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
- hex ' Physical length of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_LEN 0x4000000
- int ' Bus width in octets' CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH 2
-fi
-dep_tristate ' CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFI
-dep_tristate ' JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC
-dep_tristate ' JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC
-dep_tristate ' JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC
-dep_tristate ' Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOT
+
endmenu
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)