patch-2.4.10 linux/drivers/net/Config.in
Next file: linux/drivers/net/Makefile
Previous file: linux/drivers/net/8139too.c
Back to the patch index
Back to the overall index
- Lines: 149
- Date:
Thu Sep 20 20:56:31 2001
- Orig file:
v2.4.9/linux/drivers/net/Config.in
- Orig date:
Mon Aug 27 12:41:42 2001
diff -u --recursive --new-file v2.4.9/linux/drivers/net/Config.in linux/drivers/net/Config.in
@@ -25,12 +25,13 @@
mainmenu_option next_comment
comment 'Ethernet (10 or 100Mbit)'
-
bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
- dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
- if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
- source drivers/acorn/net/Config.in
+ if [ "$CONFIG_ARM" = "y" ]; then
+ dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110
+ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
+ source drivers/acorn/net/Config.in
+ fi
fi
if [ "$CONFIG_PPC" = "y" ]; then
tristate ' MACE (Power Mac ethernet) support' CONFIG_MACE
@@ -39,7 +40,6 @@
fi
tristate ' BMAC (G3 ethernet) support' CONFIG_BMAC
tristate ' GMAC (G4/iBook ethernet) support' CONFIG_GMAC
- tristate ' Symbios 53c885 (Synergy ethernet) support' CONFIG_NCR885E
tristate ' National DP83902AV (Oak ethernet) support' CONFIG_OAKNET
fi
if [ "$CONFIG_ZORRO" = "y" ]; then
@@ -48,12 +48,18 @@
tristate ' A2065 support' CONFIG_A2065
tristate ' Hydra support' CONFIG_HYDRA
fi
+ if [ "$CONFIG_PARISC" = "y" ]; then
+ dep_tristate ' Lasi ethernet' CONFIG_LASI_82596 $CONFIG_GSC_LASI
+ fi
if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then
tristate ' MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC
fi
if [ "$CONFIG_MIPS_GT96100" = "y" ]; then
bool ' MIPS GT96100 Ethernet support' CONFIG_MIPS_GT96100ETH
fi
+ if [ "$CONFIG_MIPS_AU1000" = "y" ]; then
+ bool ' MIPS AU1000 Ethernet support' CONFIG_MIPS_AU1000_ENET
+ fi
if [ "$CONFIG_SGI_IP27" = "y" ]; then
bool ' SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH
fi
@@ -105,7 +111,7 @@
dep_tristate ' NI6510 support' CONFIG_NI65 $CONFIG_ISA
fi
if [ "$CONFIG_ISA" = "y" -o "$CONFIG_MCA" = "y" ]; then
- dep_tristate ' AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 $CONFIG_EXPERIMENTAL
+ dep_tristate ' AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_MCA" = "y" ]; then
tristate ' DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
@@ -124,6 +130,7 @@
fi
tristate ' HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
tristate ' HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
+ tristate ' LP486E on board Ethernet' CONFIG_LP486E
tristate ' ICL EtherTeam 16i/32 support' CONFIG_ETH16I
tristate ' NE2000/NE1000 support' CONFIG_NE2000
if [ "$CONFIG_OBSOLETE" = "y" ]; then
@@ -138,10 +145,10 @@
tristate ' NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA
tristate ' IBM LAN Adapter/A support' CONFIG_IBMLANA
fi
- if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
- bool ' EISA, VLB, PCI and on board controllers' CONFIG_NET_PCI
+ if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
+ bool ' EISA, VLB, PCI and on board controllers' CONFIG_NET_PCI
else
- define_bool CONFIG_NET_PCI n
+ define_bool CONFIG_NET_PCI n
fi
if [ "$CONFIG_NET_PCI" = "y" ]; then
dep_tristate ' AMD PCnet32 PCI support' CONFIG_PCNET32 $CONFIG_PCI
@@ -153,8 +160,10 @@
dep_tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA
dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
dep_tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI
- dep_mbool ' New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL $CONFIG_TULIP
- dep_mbool ' Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO $CONFIG_TULIP
+ if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
+ dep_bool ' New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL
+ bool ' Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO
+ fi
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
tristate ' Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
@@ -182,7 +191,7 @@
if [ "$CONFIG_OBSOLETE" = "y" ]; then
dep_bool ' Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET $CONFIG_ISA
fi
- if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ORION" = "y" ]; then
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' Philips SAA9730 Ethernet support (EXPERIMENTAL)' CONFIG_LAN_SAA9730
fi
fi
@@ -194,6 +203,15 @@
dep_tristate ' D-Link DE600 pocket adapter support' CONFIG_DE600 $CONFIG_ISA
dep_tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620 $CONFIG_ISA
fi
+ if [ "$CONFIG_SGI_IP22" = "y" ]; then
+ bool ' SGI Seeq ethernet controller support' CONFIG_SGISEEQ
+ fi
+ if [ "$CONFIG_DECSTATION" = "y" ]; then
+ bool ' DEC LANCE ethernet controller support' CONFIG_DECLANCE
+ fi
+ if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
+ tristate ' Baget AMD LANCE support' CONFIG_BAGETLANCE
+ fi
fi
endmenu
@@ -206,15 +224,22 @@
comment 'Ethernet (1000 Mbit)'
dep_tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC $CONFIG_PCI
-dep_mbool ' Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I $CONFIG_ACENIC
+if [ "$CONFIG_ACENIC" != "n" ]; then
+ bool ' Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I
+fi
dep_tristate 'D-Link DL2000-based Gigabit Ethernet support' CONFIG_DL2K $CONFIG_PCI
dep_tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS $CONFIG_SBUS
+dep_tristate 'National Semiconduct DP83820 support' CONFIG_NS83820 $CONFIG_PCI
dep_tristate 'Packet Engines Hamachi GNIC-II support' CONFIG_HAMACHI $CONFIG_PCI
dep_tristate 'Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate 'SysKonnect SK-98xx support' CONFIG_SK98LIN $CONFIG_PCI
endmenu
+if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
+ dep_tristate 'iSeries Virtual Ethernet driver support' CONFIG_VETH $CONFIG_PPC_ISERIES
+fi
+
bool 'FDDI driver support' CONFIG_FDDI
if [ "$CONFIG_FDDI" = "y" ]; then
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
@@ -245,7 +270,9 @@
dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
- dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP $CONFIG_EXPERIMENTAL
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
+ fi
fi
tristate 'SLIP (serial line) support' CONFIG_SLIP
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)