patch-2.4.10 linux/arch/mips/gt64120/momenco_ocelot/pci.c

• Lines: 76
• Date: Sun Sep 9 10:43:01 2001
• Orig file: v2.4.9/linux/arch/mips/gt64120/momenco_ocelot/pci.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.9/linux/arch/mips/gt64120/momenco_ocelot/pci.c linux/arch/mips/gt64120/momenco_ocelot/pci.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/gt64120/momenco_ocelot/pci.c
+ *     Board-specific PCI routines for gt64120 controller.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/pci.h>
+
+
+void __init gt64120_board_pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_bus *current_bus = bus;
+	struct pci_dev *devices;
+	struct list_head *devices_link;
+	u16 cmd;
+
+	list_for_each(devices_link, &(current_bus->devices)) {
+
+		devices = pci_dev_b(devices_link);
+		if (devices == NULL)
+			continue;
+
+		if (PCI_SLOT(devices->devfn) == 1) {
+			/*
+			 * Slot 1 is primary ether port, i82559
+			 * we double-check against that assumption
+			 */
+			if ((devices->vendor != 0x8086) ||
+			    (devices->device != 0x1209) ) {
+				panic("gt64120_board_pcibios_fixup_bus: found "
+				      "unexpected PCI device in slot 1.");
+			}
+			devices->irq = 2;       /* irq_nr is 2 for INT0 */
+		} else if (PCI_SLOT(devices->devfn) == 2) {
+			/*
+			 * Slot 2 is secondary ether port, i21143 
+			 * we double-check against that assumption
+			 */
+			if ((devices->vendor != 0x1011) ||
+			    (devices->device != 0x19) ) {
+				panic("galileo_pcibios_fixup_bus: "
+				      "found unexpected PCI device in slot 2.");
+			}
+			devices->irq = 3;       /* irq_nr is 3 for INT1 */
+		} else if (PCI_SLOT(devices->devfn) == 4) {
+			/* PMC Slot 1 */
+			devices->irq = 8;       /* irq_nr is 8 for INT6 */
+		} else if (PCI_SLOT(devices->devfn) == 5) {
+			/* PMC Slot 1 */
+			devices->irq = 9;       /* irq_nr is 9 for INT7 */
+		} else {
+			/* We don't have assign interrupts for other devices. */
+			devices->irq = 0xff;
+		}
+
+		/* Assign an interrupt number for the device */
+		bus->ops->write_byte(devices, PCI_INTERRUPT_LINE, devices->irq);
+
+		/* enable master */
+		bus->ops->read_word(devices, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MASTER;
+		bus->ops->write_word(devices, PCI_COMMAND, cmd);
+	}
+}